Universiti Teknologi Malaysia Institutional Repository

Browse by Type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 2644.

Bakheet, A. M. A. and Saeed, M. A. and Sahnoun, Riadh and M. Isa, A. R. and Mohammed, Lawal and Mahmood, Tariq (2016) Density functional theory study of the electronic and optical properties of pure and magnesium doped Β-tricalcium phosphate compound. Jurnal Teknologi, 78 (3). pp. 167-172. ISSN 0127-9696

Ismail, M. K. H. and Esa, M. and Yusoff, M. F. M. and Murad, N. A. (2016) Novel nano structure for green energy harvesting at 10 μm thermal radiation. Journal Of Electronic Science And Technology, 14 (3). pp. 242-248. ISSN 1674-862X

Chaudhry, A. R. and Ahmed, R. and Irfan, A. and Mohamad, M. and Muhammad, S. and Ul Haq, B. and Al-Sehemi, A. G. and Al-Douri, Y. (2016) Optoelectronic properties of naphtho[2, 1-b:6, 5-b′]difuran derivatives for photovoltaic application: a computational study. Journal Of Molecular Modeling, 22 (10). pp. 1-13. ISSN 1610-2940

Ramli, A. T. and Sanusi, M. S. M. and Lee, M. H. and Sahrone, S. and Abu Hanifah, N. Z. H. (2016) Spatial distribution of natural γ radiation exposure and its relationship to soil types. Natural Hazards, 84 (3). pp. 1859-1872. ISSN 0921-030X

Mohsin, Mohd. Azman and Md. Baharudin, Md. Hamzaimi Azrol and Abdullah, Nasri and Md. Sawari, Siti Salwa and Napiah, Othman and Mohd. Noor, Sulaiman Shakib and Jasmi, Kamarul Azmi (2016) Ratib al-Attas menurut perspektif al-Quran dan hadis. Sains Humanika, 8 (3-2). pp. 101-107. ISSN 2289-6996

Huda, Miftachul and Yusuf, Jibrail and Jasmi, Kamarul Azmi and Zakaria, Gamal Nasir (2016) Al-Zarnuji’s concept of knowledge (‘ilm). SAGE OPEN, 6 (3). pp. 1-13. ISSN 2158-2440

Ghafourian, Kambiz and Mohamed, Zainai and Ismail, Syuhaida and Malakute, Roya and Abolghasemi, Maryam (2016) The 100 most cited scientific papers in construction and demolition waste management. Research Journal of Applied Sciences, Engineering and Technology, 13 (09). pp. 741-749. ISSN 2040-7459

M. Sani, Yahya and Rahim, S. K. A. (2016) 15 GHz grid array antenna for 5G mobile communications system. Microwave and Optical Technology Letters, 58 (12). pp. 2977-2980.

Sani Yahya, M. and Rahim, S. K. A. (2016) 15 GHz grid array antenna for 5G mobile communications system. Microwave and Optical Technology Letters, 58 (12). pp. 2977-2980. ISSN 0895-2477

Amiri, I. S. and Alavi, S. E. and Soltanian, M. R. K. and Penny, R. and Supa’at, A. S. M. and Fisal, N. and Ahmad, H. (2016) 2 × 2 MIMO-OFDM-RoF generation and transmission of double V-Band signals using a microring resonator system. Optical and Quantum Electronics, 48 (1). pp. 1-15. ISSN 0306-8919

Mohd. Ibrahim, Imran and Abd. Rahman, Tharek and Zakaria, Zahriladha (2016) 26 ghz open ended air gap cavity RLSA antenna for next generation broadband wireless access. Journal of Telecommunication, Electronic and Computer Engineering, 8 (4). pp. 21-24. ISSN 2180-1843

Almuashi, Mohammed and Mohd Hashim, Siti Zaiton and Mohamad, Dzulkifli and Mohammed, Hazim Alkawaz (2016) 2D image recognition of partially occluded objects based on adaptive window positioning and dynamic time warping. International Journal of Multimedia and Ubiquitous Engineering, 11 (7). pp. 169-180. ISSN 1975-0080

Amiri, I. S. and Alavi, S. E. and Soltanian, M. R. K. and Penny, R. and Supa’at, A. S. M. and Fisal, N. and Ahmad, H. (2016) 2 × 2 MIMO-OFDM-RoF generation and transmission of double V-Band signals using a microring resonator system. Optical and Quantum Electronics, 48 (1). pp. 1-15. ISSN 0306-8919

Daud, Z. H. C. and Chrenko, D. and Dos Santos, F. and Aglzim, E. and Keromnes, A. and Le Moyne, L. (2016) 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. International Journal of Energy Research, 40 (8). pp. 1144-1154.

Che Daud, Z. H. and Chrenko, D. and Dos Santos, F. and Aglzim, E. H. and Keromnes, A. and Le Moyne, L. (2016) 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. International Journal of Energy Research, 40 (8). pp. 1144-1154. ISSN 0363-907X

Yahya, S. M. and Abdullah, R. A. and Mohamad Ismail, M. A. and Mohamad, H. and Hezmi, M. A. and Jusoh, S. N. (2016) 3D numerical modelling of shallow tunnel in weathered granite incorporating multi-stage excavation and pre-support. Jurnal Teknologi, 78 (8-6). pp. 39-44. ISSN 0127-9696

Danielova, M. and Kumke, H. and Peters, S. (2016) 3D reconstruction and uncertainty modelling using Fuzzy Logic of Archaeological Structures: applied to the Temple of Diana in Nemi, Italy. Cartographica, 51 (3). pp. 137-146.

Mohd. Sobani, S. S. and Mahmood, N. H. and Zakaria, N. A. (2016) 3D surface reconstruction from a single uncalibrated 2D image. Jurnal Teknologi, 78 (7-5). pp. 161-166. ISSN 0127-9696

Marziah, Z. and Mahdzir, A. and Musa, M. N. and Jaafar, A. B. and Azhim, A. and Hara, H. (2016) Abundance of sulfur-degrading bacteria in a benthic bacterial community of shallow sea sediment in the off-Terengganu coast of the South China Sea. Microbiologyopen, 5 (6). pp. 967-978.

Marziah, Z. and Mahdzir, A. and Musa, M. N. and Jaafar, A. B. and Azhim, A. and Hara, H. (2016) Abundance of sulfur-degrading bacteria in a benthic bacterial community of shallow sea sediment in the off-Terengganu coast of the South China Sea. MicrobiologyOpen, 5 (6). pp. 967-978. ISSN 2045-8827

El Gayar, A. I. and Abdul-Malek, Z. (2016) AC interference on gas pipelines due to phase to ground faults in overhead transmission lines. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1363-1370.

Hamidifar, Fatemeh and Ebrahimi, Mansoureh (2016) Academic leadership in a private university: an Iranian case study. International Education Studies, 9 (5). pp. 193-203.

Muniyandi, Shantha Kumari and Sohaili, Johan and Hassan, Azman (2016) Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste. Journal of Applied Polymer Science, 133 (11). pp. 1-12.

Muniyandi, S. K. and Sohaili, J. and Hassan, A. (2016) Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste. Journal of Applied Polymer Science, 133 (11). ISSN 0021-8995

Wangsupphaphol, A. and Nik Idris, N. R. (2016) Acceleration-based design of electric vehicle auxiliary energy source. IEEE Aerospace and Electronic Systems Magazine, 31 (1). pp. 32-35.

Hisham, A. A. B. and Aujih, A. B. and Ishak, M. H. I. and Abidin, M. S. Z. (2016) Accuracy and quickness criterion-based driving skill metric for human adaptive mechatronics system. Jurnal Teknologi, 78 (6-13). pp. 9-16. ISSN 0127-9696

Chin, V. J. and Salam, Z. and Ishaque, K. (2016) An accurate modelling of the two-diode model of PV module using a hybrid solution based on differential evolution. Energy Conversion and Management, 124 . pp. 42-50.

Nabga, W. and Abdullah, T. A. T. and Mat, R. and Nabgan, B. and Gambo, Y. and Moghadamian, K. (2016) Acetic acid-phenol steam reforming for hydrogen production: effect of different composition of La2O3-Al2O3 support for bimetallic Ni-Co catalyst. Journal of Environmental Chemical Engineering, 4 (3). pp. 2765-2773.

Mat Junoh, Muhammad and Ibrahim, Zaharah and Ani, Farid Nasir (2016) Activated carbon from Mukah coal for textile wastewater bioremediation treatment. Jurnal Teknologi, 78 (9-2). pp. 1-7. ISSN 0127-9696

Abdurabu, W. A. and Ramli, A. T. and Saleh, M. A. and Heryansyah, A. (2016) The activity concentrations of 222-Rn and corresponding health risk in groundwater samples from basement and sandstone aquifer; the correlation to physicochemical parameters. Radiation Physics And Chemistry, 127 . pp. 34-41. ISSN 0969-806X

Abdurabu, W. A. and Ramli, A. T. and Saleh, M. A. and Heryansyah, A. (2016) The activity concentrations of 222Rn and corresponding health risk in groundwater samples from basement and sandstone aquifer, the correlation to physicochemical parameters. Radiation Physics and Chemistry, 127 . pp. 34-41. ISSN 0969-806X

Hamza, Hentabli and Salim, Naomie and Saeed, Faisal (2016) An activity prediction model using shape-based descriptor method. Jurnal Teknologi, 78 (6-12). pp. 135-142. ISSN 0127-9696

Wang, Xiao-jun and Zhang, Jian-yun and Shahid, Shamsuddin and Guan, En-hong and Wu, Yong-xiang and Gao, Juan and He, Rui-min (2016) Adaptation to climate change impacts on water demand. Mitigation and Adaptation Strategies for Global Change, 21 (1). pp. 81-99.

Himmat, Mubarak and Salim, Naomie and Al-Dabbagh, Mohammed Mumtaz and Saeed, Faisal and Ahmed, Ali (2016) Adapting document similarity measures for ligand-based virtual screening. Molecules, 21 (4). pp. 1-13.

Omar, Z. and Hamzah, N. and Stathaki, T. (2016) Adaptive chebyshev fusion of vegetation imagery based on SVM classifier. Jurnal Teknologi, 78 (6-11). pp. 9-17. ISSN 0127-9696

Nathaniel, Salawu and Syed Ariffin, Sharifah Hafizah and Khan, Adnan Shahid (2016) Adaptive cost-based handover decision algorithm for user equipment battery-life aware load balancing in LTE network. International Review on Computers and Software, 11 (11). pp. 979-988. ISSN 1828-6003

Iqbal, S. and Abdullah, A. H. and Mohamad, M. M. and Qureshi, K. N. and Hussain, K. (2016) Adaptive interface reconfiguration in low-rate mesh WPANs. Journal of Computational and Theoretical Nanoscience, 13 (7). pp. 4703-4710.

Shehu, M. A. and Saeed, F. (2016) An adaptive personnel selection model for recruitment using domain-driven data mining. Journal of Theoretical and Applied Information Technology, 91 (1). pp. 117-130.

Shehu, M. A. and Saeed, F. (2016) An adaptive personnel selection model for recruitment using domain-driven data mining. Journal of Theoretical and Applied Information Technology, 91 (1). pp. 117-130. ISSN 1992-8645

Wan Dagang, W. R. and Bowen, J. and O'Keeffe, J. and Robbins, P. T. and Zhang, Z. (2016) Adhesion of Pseudomonas fluorescens biofilms to glass, stainless steel and cellulose. Biotechnology Letters, 38 (5). pp. 787-792.

Vejayon, Jayaseelan and Narayana Samy, Ganthan and Maarop, Nurazean and Megat Mohd Zainuddin, Norziha and Shanmugam, Bharanidharan and Magalingam, Pritheega (2016) Adopting factors of bring your own device (BYOD) at the selected private higher learning institution in Malaysia. Journal of Advanced Research in Social and Behavioural Sciences, 2 (1). pp. 24-32. ISSN 2462-1951

Khorasanizadeh, H. and Honarpour, A. and Park, M. S. A. and Parkkinen, J. and Parthiban, R. (2016) Adoption factors of cleaner production technology in a developing country: energy efficient lighting in Malaysia. Journal of Cleaner Production, 131 . pp. 97-106. ISSN 0959-6526

Yusof, M. M. and Ismail, Z. and Rahim, N. Z. A. (2016) The adoption of open innovation and co-creation in Malaysian telecommunication industry. Advanced Science Letters, 22 (8). pp. 2047-2051. ISSN 1936-6612

Zakaria, N. F. and Majid, Z. A. and Ramli, Z. and Jaafar, J. and Aris, A. and Talib, J. and Ali, R. (2016) Adsorbent from waste and natural deposits for paraquat removal in water. Malaysian Journal of Analytical Sciences, 20 (3). pp. 469-476.

Tsuji, T. and Hoshina, T. and Hiaki, T. and Itoh, N. (2016) Adsorption and phase equilibria for hydrogen storage system based on dehydrogenation reaction of naphthenes, and its process design. Journal of the Japan Petroleum Institute, 59 (3). pp. 73-83.

Johari, K. and Saman, N. and Song, S. T. and Chin, C. S. and Kong, H. and Mat, H. (2016) Adsorption enhancement of elemental mercury by various surface modified coconut husk as eco-friendly low-cost adsorbents. International Biodeterioration and Biodegradation, 109 . pp. 45-52.

Nik Malek, Nik Ahmad Nizam and Mat Sihat, Nurain and Khalifa, Mahmud A. S. and Kamaru, Auni Afiqah and Sani, Nor Suriani (2016) Adsorption of acid orange 7 by cetylpyridinium bromide modified sugarcane bagasse. Jurnal Teknologi, 78 (1-2). pp. 97-103. ISSN 0127-9696

Nasirmahaleh, H. H. and Safi, S. Z. and Sazegar, M. R. and Qvist, R. and Ismail, I. S. B. and Ashraf, M. A. and Malek, N. A. N. N. (2016) Adsorption of amoxicillin on surfactant modified zeolites and their antibacterial activity. Research Journal of Biotechnology, 11 (9). pp. 75-78. ISSN 0973-6263

Che Othman, Faten Ermala and Yusof, Norhaniza and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abdullah, Norfadhilatuladha and Hasbullah, Hasrinah (2016) Adsorption of cadmium (II) ions by polyacrylonitrile-based activated carbon nanofibers/magnesium oxide as its adsorbents. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1467-1473.

Selvam, S. B. and Chelliapan, S. and Din, M. F. M. and Shahperi, R. and Aris, M. A. M. (2016) Adsorption of heavy metals from matured leachate by Gracilaria. sp extract. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 7 (3). pp. 15-20.

Quah, Zhi Yong and Ahmad Zaini, Muhammad Abbas (2016) Adsorption of rhodamine B by palm kernel shell adsorbents. Journal of Engineering and Technology, 7 (2). pp. 1-16. ISSN 21803811

Kamaru, Auni Afiqah and Ahmad Jani, Nurul Soraya and Nik Malek, Nik Ahmad Nizam and Sani, Nor Suriani (2016) Adsorptive removal of methylene blue and acid orange 7 by hexadecyltrimethylammonium bromide modified rice husk. Jurnal Teknologi, 78 (3-2). pp. 113-119. ISSN 0127-9696

Garba, A. and Nasri, N. S. and Basri, H. and Ismail, R. and Abdul Majid, Z. D. and Hamza, U. and Mohammed, J. (2016) Adsorptive removal of phenol from aqueous solution on a modified palm shell-based carbon: fixed-bed adsorption studies. Desalination and Water Treatment, 57 (60). pp. 29488-29499.

Garba, A. and Nasri, N. S. and Basri, H. and Ismail, R. and Abdul Majid, Z. and D. Hamza, U. and Mohammed, J. (2016) Adsorptive removal of phenol from aqueous solution on a modified palm shell-based carbon: fixed-bed adsorption studies. Desalination and Water Treatment, 57 (60). pp. 29488-29499. ISSN 1944-3994

Reddy, A. V. B. and Yusop, Z. and Jaafar, J. and Madhavi, V. and Madhavi, G. (2016) Advances in drug discovery: impact of genomics and role of analytical instrumentation. Current Drug Discovery Technologies, 13 (4). pp. 211-224.

Imani Yengejeh, Sadegh and Kazemi, Seyedeh Alieh and Ochsner, Andreas (2016) Advances in mechanical analysis of structurally and atomically modified carbon nanotubes and degenerated nanostructures: a review. Composites Part B: Engineering, 86 . pp. 95-107. ISSN 1359-8368

Ali, N. and Hussain, A. and Ahmed, R. and Wang, M. K. and Zhao, C. and Haq, B. U. and Fu, Y. Q. (2016) Advances in nanostructured thin film materials for solar cell applications. Renewable and Sustainable Energy Reviews, 59 . pp. 726-737.

Qureshi, K. N. and Abdullah, A. H. and Anwara, R. W. and Anwar, M. and Awan, K. M. (2016) AEGRP: an enhanced geographical routing protocol for vanet. Jurnal Teknologi, 78 (4-3). pp. 83-88. ISSN 0127-9696

Halimoon, H. and Hussain, A. R. and Kouzani, A. and Alam, M. N. H. Z. (2016) Aerobic fermentation of saccharomeyes cerevisae in a miniature bioreactor made of low cost poly(methylmethacrylate) (PMMA) and Poly(Dimethylsiloxane) (PDMS) Polymers. Sains Malaysiana, 45 (6). pp. 969-976.

Halimoon, H. and Hussain, A. R. and Kouzani, A. and Alam, M. N. H. Z. (2016) Aerobic fermentation of saccharomeyes cerevisae in a miniature bioreactor made of low cost poly(methylmethacrylate) (PMMA) and Poly(Dimethylsiloxane) (PDMS) Polymers. Sains Malaysiana, 45 (6). pp. 969-976. ISSN 0126-6039

Samion, S. R. L. and Ali, M. S. M. and Abu, A. and Doolan, C. J. and Porteous, R. Z. Y. (2016) Aerodynamic sound from a square cylinder with a downstream wedge. Aerospace Science and Technology, 53 . pp. 85-94.

Samion, S. R. L. and Ali, M. S. M. and Abu, A. and Doolan, C. J. and Porteous, R. Z. Y. (2016) Aerodynamic sound from a square cylinder with a downstream wedge. Aerospace Science and Technology, 53 . pp. 85-94. ISSN 1270-9638

Sanagi, Mohd. Marsin and Loh, Saw Hong and Wan Ibrahim, Wan Nazihah and Pourmand, Neda and Salisu, Ahmed and Wan Ibrahim, Wan Aini and Ali, Imran (2016) Agarose- and alginate-based biopolymers for sample preparation: excellent green extraction tools for this century. Journal of Separation Science, 39 (6). pp. 1152-1159.

Chaw, Jun Kit and Mohd. Mokji, Musa (2016) Agricultural product recognition system using taxonomist's knowledge as semantic attributes. Engineering in Agriculture, Environment and Food, 9 (3). pp. 224-234. ISSN 1881-8366

Chaw, J. K. and Mokji, M. (2016) Agricultural products recognition system using taxonomist's knowledge as semantic attributes. Engineering in Agriculture, Environment and Food, 9 (3). pp. 224-234.

Chaw, J. K. and Mokji, M. (2016) Agricultural products recognition system using taxonomists knowledge as semantic attributes. Engineering in Agriculture, Environment and Food, 9 (3). pp. 224-234. ISSN 1881-8366

Ahmed, Ferdous and Al-Amin, Abul Quasem and Mohamad, Zeeda Fatimah and Chenayah, Santha (2016) Agriculture and food security challenge of climate change: a dynamic analysis for policy selection. Scientia Agricola, 73 (4). pp. 311-321.

Ahmed, F. and Al Amin, A. Q. and Mohamad, Z. F. and Chenayah, S. (2016) Agriculture and food security challenge of climate change: a dynamic analysis for policy selection. Scientia Agricola, 73 (4). pp. 311-321. ISSN 0103-9016

Al-mulali, U. and Fereidouni, H. G. and Mohammed, M. A. H. and Lee, J. Y. M. (2016) Agriculture investment, output growth, and CO2 emissions relationship. Energy Sources, Part B: Economics, Planning and Policy, 11 (7). pp. 665-671.

Abdul Hassan, Norhidayah and Mahmud, Mohd Zul Hanif and Ahmad, Kabiru Abdullahi and Hainin, Mohd. Rosli and Putra Jaya, Ramadhansyah and Mashros, Nordiana (2016) Air voids characterisation and permeability of porous asphalt gradations used in different countries. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14043-14047. ISSN 1819-6608

Jahed Armaghani, D. and Hasanipanah, M. and Mahdiyar, A. and Abd. Majid, M. Z. and Bakhshandeh Amnieh, H. and Tahir, M. M. D. (2016) Airblast prediction through a hybrid genetic algorithm-ANN model. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press)

Salisu, Ahmed and Sanagi, Mohd. Marsin and Abu Naim, Ahmedy and Abd Karim, Khairil Juhanni and Wan Ibrahim, Wan Aini and Abdulganiyu, Umar (2016) Alginate graft polyacrylonitrile beads for the removal of lead from aqueous solutions. Polymer Bulletin, 73 (2). pp. 519-537.

Naz, Gul and Othaman, Zulkafli and Shamsuddin, Mustaffa and Ghoshal, S. Krishna (2016) Aliquat 336 stabilized multi-faceted gold nanoparticles with minimal ligand density. Applied Surface Science, 363 . pp. 74-82.

Naz, G. and Othaman, Z. and Shamsuddin, M. and Ghoshal, S. K. (2016) Aliquat 336 stabilized multi-faceted gold nanoparticles with minimal ligand density. Applied Surface Science, 363 . pp. 74-82. ISSN 0169-4332

Hafizan, Che and Zainon Noor, Zainura and Abba, Ahmad Halilu and Hussein, Norelyza (2016) An alternative aggregation method for a life cycle impact assessment using an analytical hierarchy process. Journal of Cleaner Production, 112 . pp. 3244-3255.

Hafizan, C. and Noor, Z. Z. and Abba, A. H. and Hussein, N. (2016) An alternative aggregation method for a life cycle impact assessment using an analytical hierarchy process. Journal of Cleaner Production, 112 . pp. 3244-3255. ISSN 0959-6526

Maniruzzaman, M. A. A. and Rahman, M. T. and Rosli Haininl, M. and Abu, W. A. W. B. (2016) Alternative binders for flexible pavement. ARPN Journal Of Engineering and Applied Sciences, 11 (20). pp. 11868-11871.

A. Aziz, Md. Maniruzzaman and Rahman, Md. Tareq and Haininl, Mohd. Rosli and Wan Abu Bakar, Wan Azelee (2016) Alternative binders for flexible pavement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11868-11871. ISSN 1819-6608

Nurul, M. A. and Syahrullail, S. and Teng, H. W. (2016) Alternative lubricants: study on palm oil-based lubricants in metal forming process. Journal of Oil Palm Research, 28 (1). pp. 93-103.

Nurul, M. A. and Syahrullail, S. and Teng, H. W. (2016) Alternative lubricants: study on palm oil-based lubricants in metal forming process. Journal of Oil Palm Research, 28 (1). pp. 93-103. ISSN 1511-2780

Abu Talib, Hazlani and Saud, Muhammad Sukri (2016) Amalan pengurusan ruang kerja bengkel kemahiran hidup sekolah menengah dalam kalangan ketua panitia KHB di negeri Melaka. Jurnal Persatuan Pendidikan Teknik dan Vokasional Malaysia (PTVM), 6 . pp. 15-27. ISSN 1985-6652

Mohd. Hanim, Siti Aishah and Nik Malek, Nik Ahmad Nizam and Ibrahim, Zaharah (2016) Amine-functionalized, silver-exchanged zeolite NaY: preparation, characterization and antibacterial activity. Applied Surface Science, 360 . pp. 121-130.

Darwish, Mohamad and Aris, Azmi and Puteh, Mohd. Hafiz and Abideen, Muzaffar Zainal and Othman, Mohd. Nor (2016) Ammonium-nitrogen recovery from wastewater by struvite crystallization technology. Separation and Purification Reviews, 45 (4). pp. 261-274.

Chong, W. W. F. and Chidlow, S. J. (2016) Analysing the effects of sliding, adhesive contact on the deformation and stresses induced within a multi-layered elastic solid. Mechanics of Materials, 101 . pp. 1-13.

Abdallah, A. and Salleh, M. (2016) Analysis and comparison the security and performance of secret sharing schemes. Asian Journal of Information Technology, 15 (1). pp. 26-35.

Sanik, Mohd. Erwan and Prasetijo, Joewono and Mat Nor, Ahmad Hakimi and Hamid, Nor Baizura and Yusof, Ismail and Putra Jaya, Ramadhansyah (2016) Analysis of car following headway along multilane highway. Jurnal Teknologi, 78 (4). pp. 59-64. ISSN 0127-9696

Ahmad, M.S. and Abu Talib, N.B. (2016) Analysis of community empowerment on projects sustainability: moderating role of sense of community. Social Indicators Research, 129 (3). pp. 1039-1056. ISSN 0303-8300

Mohamad, E. J. and Rahim, R. A. and Rahiman, M. H. F. and Ameran, H. L. M. and Wahab, Y. A. and Marwah, O. M. F. (2016) Analysis of crude palm oil composition in a chemical process conveyor using electrical capacitance tomography. Flow Measurement and Instrumentation, 50 . pp. 57-64.

Mohamad, E. J. and Rahim, R. A. and Rahiman, M. H. F. and Ameran, H. L. M. and Wahab, Y. A. and Marwah, O. M. F. (2016) Analysis of crude palm oil composition in a chemical process conveyor using Electrical Capacitance Tomography. Flow Measurement and Instrumentation, 50 . pp. 57-64. ISSN 0955-5986

Kang, C. S. and Kanniah, K. D. and Kerr, Y. H. and Cracknell, A. P. (2016) Analysis of in-situ soil moisture data and validation of SMOS soil moisture products at selected agricultural sites over a tropical region. International Journal of Remote Sensing, 37 (16). pp. 3636-3654.

Qais, A. Y. and Normah, M. G. and Agus, S. P. (2016) Analysis of outcomes of the frictional pressure drop prediction using different data source. Jurnal Teknologi, 78 (10-2). pp. 29-37. ISSN 0127-9696

Amiri, I. S. and Alavi, S. E. and Supa’at, A. S. M. and Ali, J. and Ahmad, H. (2016) The analysis of phase, dispersion and group delay in InGaAsP/InP microring resonator. Jurnal Teknologi, 78 (3). pp. 43-49. ISSN 0127-9696

Marsono, A. K. and Hatami, S. (2016) Analysis of reinforced concrete shear walls with single band of octagonal openings. KSCE Journal of Civil Engineering, 20 (5). pp. 1887-1894.

Mohamad, A. and Bahadoran, M. and Daud, S. and Chaudhary, K. T. and Aziz, M. S. and Jalil, M. A. and Ali, J. and Yupapin, P. P. (2016) Analysis of temperature sensor in all-pass microring resonator. Jurnal Teknologi, 78 (3). pp. 61-65. ISSN 0127-9696

Jambak, M. I. and Nawawi, Z. and Kurnia, R. F. and Buntat, Zolkafle and Sidik, M. A. B. and Arief, Y. Z. and Wahab, A. A. and Ramli, Z. and Ramly, M. E. (2016) Analysis of transmission lightning arrester locations using Tflash. Telkomnika (Telecommunication Computing Electronics and Control), 14 (4). pp. 1228-1234. ISSN 1693-6930

Cheng, E. M. and Abbas, Z. and Rahim Samsuddin, H. A. and Lee, K. Y. and You, K. Y. and Hassan, J. and Zainuddin, H. and Khor, S. F. (2016) Analysis on monopole antenna for moisture determination in oil palm fruit using finite difference method. Journal of Electrical Engineering and Technology, 11 (6). pp. 1754-1762.

Wahab, A. H. A. and Kadir, M. R. A. and Kamarul, T. and Harun, M. N. and Syahrom, A. (2016) Analysis on stress and micromotion on various PEG fixation at glenoid implant. Tribology - Materials, Surfaces and Interfaces, 10 (1). pp. 26-32.

Long, C. S. and Azami, A. and Kowang, T. O. and Fei, G. C. (2016) An analysis on the relationship between work family conflict and turnover intention: a case study in a manufacturing company in Malaysia. International Business Management, 10 (3). pp. 176-182.

Karimi, Hediyeh and Rahmani, Rasoul and Othman, Mohd Fauzi and Zohoori, Bahareh and Mahrami, Mohsen and Kamyab, Hesam and Hosseini, Seyed Ebrahim (2016) An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks. Plasmonics, 11 (1). pp. 95-102.

Akbari, E. and Afroozeh, A. and Tan, M. L. P. and Arora, V. K. and Ghadiry, M. (2016) Analytical assessment of carbon allotropes for gas sensor applications. Measurement: Journal of the International Measurement Confederation, 92 . pp. 295-302.

Jannati, M. and Monadi, A. and Idris, N. R. N. and Faudzi, A. A. M. (2016) Analytical calculation of the RFOC method in single-phase induction motor. International Journal of Electronics, 103 (5). pp. 775-793.

Akbari, Elnaz and Buntat, Zolkafle and Shahraki, Elmira and Parvaz, Ramtin and Kiani, Mohammad Javad (2016) Analytical investigation of bilayer lipid biosensor based on graphene. Journal of Biomaterials Applications, 30 (6). pp. 677-685.

Kiani, M. J. and Akbari, E. and Rahmanian Kooshkaki, F. and Zeinalinezhad, A. (2016) Analytical investigation of carrier concentration effect on one-dimensional graphene nanoscroll. Electronic Materials Letters, 12 (2). pp. 219-223. ISSN 1738-8090

Akbari, E. and Buntat, Z. and Afroozeh, A. and Zeinalinezhad, A. and Khaledian, M. (2016) Analytical investigation of CO2 sensor based on carbon strand. International Journal of Environmental Science and Technology, 13 (1). pp. 339-348.

Akbari, Elnaz and Buntat, Zolkafle and Afroozeh, Abdolkarim and Zeinalinezhad, Alireza and Kiani, M. J. and Shahrokh Abadi, M. H. (2016) Analytical investigations of gas-sensor using methane decomposition system. Environmental Earth Sciences, 75 (5). pp. 1-10.

Akbari, E. and Buntat, Z. and Afroozeh, A. and Zeinalinezhad, A. and Kiani, M. J. and Abadi, M. H. S. (2016) Analytical investigations of gas-sensor using methane decomposition system. Environmental Earth Sciences, 75 (5). pp. 1-10. ISSN 1866-6280

Hussanan, Abid and Salleh, Mohd. Zuki and Khan, Ilyas and Shafie, Sharidan (2016) Analytical solution for suction and injection flow of a viscoplastic Casson fluid past a stretching surface in the presence of viscous dissipation. Neural Computing and Applications . pp. 1-9. ISSN 0941-0643 (In Press)

Hafizi, R. and Miskon, S. and Rahman, A. A. and Sim, A. T. H. and Abdullah, N. S. and Ahmad, N. (2016) Analyzing sharing experiences in government sector based on shared service perspectives. Journal of Theoretical and Applied Information Technology, 88 (1). pp. 123-134.

Hafizi, R. and Miskon, S. and Rahman, A. A. and Sim, A. T. H. and Abdullah, N. S. and Ahmad, N. (2016) Analyzing sharing experiences in government sector based on shared service perspectives. Journal of Theoretical and Applied Information Technology, 88 (1). pp. 123-134. ISSN 1992-8645

Helmi, F. and Khaidzir, K. A. B. (2016) Analyzing the critical role of sketches in the visual transformation of architectural design. Archnet-Ijar International Journal of Architectural Research, 10 (2). pp. 219-229.

Helmi, Farshad and Mohamed Khaidzir, Khairul Anwar (2016) Analyzing the critical role of sketches in the visual transformation of architectural design. Archnet-IJAR, 10 (2). pp. 219-229. ISSN 1938-7806

Asadi-Shekari, Z. and Moeinaddini, M. and Sultan, Z. and Shah, M. Z. and Hamzah, A. (2016) Analyzing the relationships between travel mode indicators and the number of passenger transport fatalities at the city level. Traffic Injury Prevention, 17 (6). pp. 650-655.

Akbari, E. and Buntat, Z. and Shahraki, E. and Zeinalinezhad, A. and Nilashi, M. (2016) ANFIS modeling for bacteria detection based on GNR biosensor. Journal of Chemical Technology and Biotechnology, 91 (6). pp. 1728-1736.

Akbari, E. and Buntat, Z. and Shahraki, E. and Zeinalinezhad, A. and Nilashi, M. (2016) ANFIS modeling for bacteria detection based on GNR biosensor. Journal of Chemical Technology and Biotechnology, 91 (6). pp. 1728-1736. ISSN 0268-2575

Yusof, Z. M. and Ibrahim, Z. and Ibrahim, I. and Azmi, K. Z. M. and Ab. Aziz, N. A. and Aziz, N. H. A. and Mohamad, M. S. (2016) Angle modulated simulated Kalman Filter algorithm for combinatorial optimization problems. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4854-4859.

Miyake, Hideto and Nishio, Gou and Suzuki, Shuhei and Hiramatsu, Kazumasa and Fukuyama, Hiroyuki and Kaur, Jesbains and Kuwano, Noriyuki (2016) Annealing of an AlN buffer layer in N2-CO for growth of a high-quality AlN film on sapphire. Applied Physics Express, 9 (2). pp. 1-4.

Aminu, Dodo Yakubu and Lei, L. X. and Hussein, A. (2016) Annexing green building rating points through multipurpose vertical light pipes. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Lurudusamy, S. N. and Ramayah, T. (2016) The antecedants of broadband internet adoption and continuance usage in Malaysian household context. Journal of Theoretical and Applied Information Technology, 88 (3). pp. 476-486. ISSN 1992-8645

Muhamad, W. A. W. and Ngah, R. and Jamlos, M. F. and Soh, P. J. and Jamlos, M. A. and Lago, H. (2016) Antenna array bandwidth enhancement using polymeric nanocomposite substrate. Applied Physics A: Materials Science and Processing, 122 (4). pp. 1-9.

Sathishkumar, P. and Preethi, J. and Vijayan, R. and Mohd. Yusoff, A. R. and Ameen, F. and Suresh, S. and Balagurunathan, R. and Palvannan, T. (2016) Anti-acne, anti-dandruff and anti-breast cancer efficacy of green synthesised silver nanoparticles using Coriandrum sativum leaf extract. Journal of Photochemistry and Photobiology B: Biology, 163 . pp. 69-76. ISSN 1011-1344

Palanivel, Sathishkumar and Johnson, Preethi and Vijayan, Raji and Mohd. Yusoff, Abdull Rahim and Ameen, Fuad and Suresh, Sadhasivam and Balagurunathan, Ramasamy and Palvannan, Thayumanavan (2016) Anti-acne, anti-dandruff and anti-breast cancer efficacy of green synthesised silver nanoparticles using coriandrum sativum leaf extract. Journal of Photochemistry and Photobiology, Biology, 163 . pp. 69-76. ISSN 1011-1034

Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Jomehzadeh, F. (2016) Anti-short-circuit device: a new solution for short-circuiting in windcatcher and improvement of natural ventilation performance. Building and Environment, 105 . pp. 24-39. ISSN 0360-1323

Goh, Y. F. and Akram, M. and Alshemary, A. and Hussain, R. (2016) Antibacterial polylactic acid/chitosan nanofibers decorated with bioactive glass. Applied Surface Science, 387 . pp. 1-7. ISSN 0169-4332

W. Salleh, Wan Mohd Nuzul Hakimi and Ahmad, Farediah and Khong, Heng Yen and Mohamed Zulkifli, Razauden (2016) Anticholinesterase and anti-inflammatory constituents from beilschmiedia pulverulenta kosterm. Natural Product Sciences, 22 (4). pp. 225-230. ISSN 1226-3907

Abidin, M. N. Z. and Goh, P. S. and Ismail, A. F. and Othman, M. H. D. and Hasbullah, H. and Said, N. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2016) Antifouling polyethersulfone hemodialysis membranes incorporated with poly (citric acid) polymerized multi-walled carbon nanotubes. Materials Science and Engineering C, 68 . pp. 540-550.

Jamalludin, M. R. and Harun, Z. and Hubadillah, S. K. and Basri, H. and Ismail, A. F. and Othman, M. H. D. and Shohur, M. F. and Yunos, M. Z. (2016) Antifouling polysulfone membranes blended with green SiO2 from rice husk ash (RHA) for humic acid separation. Chemical Engineering Research and Design, 114 . pp. 268-279.

Md. Saad, Nor Syafawani Sarah and Nik Malek, Nik Ahmad Nizam and Chong, Chun Shiong (2016) Antimicrobial activity of copper kaolinite and surfactant modified copper kaolinite against gram positive and gram negative bacteria. Jurnal Teknologi, 78 (3-2). pp. 127-132. ISSN 0127-9696

Parham, S. and Wicaksono, D. H. B. and Bagherbaigi, S. and Lee, S. L. and Nur, H. (2016) Antimicrobial treatment of different metal oxide nanoparticles: a critical review. Journal of the Chinese Chemical Society, 63 (4). pp. 385-393.

Ali, N. and Hussain, A. and Ahmed, R. and Shamsuri, W. N. W. and Shaari, A. and Ahmad, N. and Abbas, S. M. (2016) Antimony sulphide, an absorber layer for solar cell application. Applied Physics A: Materials Science and Processing, 122 (1). pp. 1-7.

Marvibaigi, M. and Amini, N. and Supriyanto, E. and Majid, F. A. A. and Jaganathan, S. K. and Jamil, S. and Almaki, J. H. and Nasiri, R. (2016) Antioxidant activity and ROS-dependent apoptotic effect of Scurrula ferruginea (Jack) danser methanol extract in human breast cancer Cell MDA-MB-231. Plos One, 11 (7). pp. 1-36.

Marvibaigi, M. and Amini, N. and Supriyanto, E. and Majid, F. A. A. and Jaganathan, S. K. and Jamil, S. and Almaki, J. H. and Nasiri, R. (2016) Antioxidant activity and ROS-dependent apoptotic effect of scurrula ferruginea (jack) danser methanol extract in human breast cancer cell MDA-MB-231. PLoS ONE, 11 (7). ISSN 1932-6203

Wan Salleh, Wan Mohd. Nuzul Hakimi and Ahmad, Farediah (2016) Antioxidant and anti-inflammatory activities of essential oils of Actinodaphne macrophylla and A. pruinosa (Lauraceae). Natural Product Communications, 11 (6). pp. 853-855. ISSN 1934-578X

Salleh, W. M. N. H. W. and Ahmad, F. (2016) Antioxidant and anticholinesterase activities of essential oil of Alseodaphne peduncularis meisn. Turkish Journal of Pharmaceutical Sciences, 13 (3). pp. 347-350. ISSN 1304-530X

Hashim, N. A. and Ahmad, F. and Susanti, D. (2016) Antioxidant and antityrosinase activities of piper maingayi HK. Essential oils. Jurnal Teknologi, 78 (1). pp. 169-174.

Mohd. Daud, N. S. and Abang Zaidel, D. N. and Kok Song, L. and Muhamad, I. I. and Mohd Jusoh, Y. M. (2016) Antioxidant properties of rice bran oil from different varieties extracted by solvent extraction methods. Jurnal Teknologi, 78 (6-12). pp. 107-110. ISSN 0127-9696

Ismail, N. I. and Abdul Kadir, M. R. and Mahmood, N. H. and Singh, O. P. and Iqbal, N. and Zulkifli, R. M. (2016) Apini and Meliponini foraging activities influence the phenolic content of different types of Malaysian honey. Journal of Apicultural Research, 55 (2). pp. 137-150.

Mat Daut, M. A. and Hassan, M. Y. and Abdullah, H. and Abdul Rahman, H. and Abdullah, M. P. and Hussin, F. (2016) Application of a hybrid of least square support vector machine and artificial bee colony for building load forecasting. Jurnal Teknologi, 78 (6-2). pp. 91-96. ISSN 0127-9696

Elmahdy, Samy Ismail and Marghany, Maged Mahmoud and Mohamed, Mohamed Mostafa (2016) Application of a weighted spatial probability model in GIS to analyse landslides in Penang Island, Malaysia. Geomatics, Natural Hazards and Risk, 7 (1). pp. 345-359.

Ahmad, I. and Said, H. (2016) Application of Astin's theory of students' involvement in service learning at higher education. Man in India, 96 (1). pp. 231-245.

Ahmad, I. and Said, H. (2016) Application of astins theory of students involvement in service learning at higher education. Man in India, 96 (1-2). pp. 231-245. ISSN 0025-1569

Mohammadian, Erfan and Motamedi, Shervin and Shamshirband, Shahaboddin and Hashim, Roslan and Junin, Radzuan and Roy, Chandrabhushan and Azdarpour, Amin (2016) Application of extreme learning machine for prediction of aqueous solubility of carbon dioxide. Environmental Earth Sciences, 75 (3). pp. 1-11.

Norzaida, A. and Zalina, M. D. and Fadhilah, Y. (2016) Application of Fourier series in managing the seasonality of convective and monsoon rainfall. Hydrological Sciences Journal-Journal Des Sciences Hydrologiques, 61 (10). pp. 1967-1980.

Sani, D. A. and Shahabi, H. and Ahmad, B. A. and Mirmokrigharehveran, S. and Ahmad, B. B. (2016) Application of geographic information system technology in controlling pipeline vandalism of oil and gas industry. Research Journal of Information Technology, 8 (42371). pp. 39-46.

Ubani, C. A. and Ibrahim, M. A. and Teridi, M. A. M. and Sopian, K. and Ali, J. and Chaudhary, K. T. (2016) Application of graphene in dye and quantum dots sensitized solar cell. Solar Energy, 137 . pp. 531-550.

Aziz, Z. A. A. and Mohd. Ali, S. A. and Ahmad, A. and Mohd. Setapar, S. H. (2016) Application of herbal extract and its medicinal value. Der Pharmacia Lettre, 8 (9). pp. 161-167.

Zulkifle, Nurul Nadhirah and Sanagi, Mohd. Marsin and Wan Ibrahim, Wan Aini (2016) Application of multi-walled carbon nanotube-agarose/chitosan composite film microextraction HPLC-UV to the determination of anthracene in lake water. eProceedings Chemistry, 1 (1). pp. 42-47. ISSN 2550-1453

Mardani, Abbas and Jusoh, Ahmad and Zavadskas, Edmundas Kazimieras and Kazemilari, Mansooreh and Ungku Ahmad, Ungku Norulkamar and Khalifah, Zainab (2016) Application of multiple criteria decision making techniques in tourism and hospitality industry: a systematic review. Transformations in Business & Economics, 15 (1). pp. 192-213.

Mohi-Aldeen, S. M. and Mohamad, R. and Deris, S. (2016) Application of Negative Selection Algorithm (NSA) for test data generation of path testing. Applied Soft Computing Journal, 49 . pp. 1118-1128.

Mohi Aldeen, S. M. and Mohamad, R. and Deris, S. (2016) Application of Negative Selection Algorithm (NSA) for test data generation of path testing. Applied Soft Computing Journal, 49 . pp. 1118-1128. ISSN 1568-4946

Mokhtar, M. R. and Abdullah, M. P. and Hassan, M. Y. and Hussin, F. (2016) Application of PROMETHEE method for demand side management (DSM) options ranking. Jurnal Teknologi, 78 (5-7). pp. 23-28. ISSN 0127-9696

Muhammad Zin, Hakimah and Salamon, Hussin (2016) Application of promise in Al-Ijarah Thumma Al-Bai (AITAB) facility. International Business Management, 10 (17). pp. 3793-3799. ISSN 1993-5250

Muhammad Zin, Hakimah and Salamon, Hussin (2016) Application of promise in Al-Ijarah Thumma Al-Bai' (AITAB) facility. International Business Management, 10 (17). pp. 3793-3799. ISSN 1993-5250

Hasanipanah, Mahdi and Jahed Armaghani, Danial and Bakhshandeh Amnieh, Hassan and Majid, Muhd. Zaimi Abd. and Tahir, Mahmood Md. (2016) Application of PSO to develop a powerful equation for prediction of flyrock due to blasting. Neural Computing and Applications . pp. 1-8. ISSN 0941-0643 (In Press)

Nawaz, N. and Harun, S. and Othman, R. and Heryansyah, A. (2016) Application of radial basis function neural networks for modeling rainfall-runoff processes: a case study of Semenyih River catchment, Malaysia. Chiang Mai Journal of Science, 43 (6Speci). pp. 1358-1367.

Armaghani, Danial Jahed and Mohamad, Edy Tonnizam and Hajihassani, Mohsen and Yagiz, Saffet and Motaghedi, Hossein (2016) Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances. Engineering with Computers, 32 (2). pp. 189-206.

Ahmad, S. and Mat Tahar, R. and Muhammad-Sukki, F. and Munir, A. B. and Abdul Rahim, R. (2016) Application of system dynamics approach in electricity sector modelling: a review. Renewable and Sustainable Energy Reviews, 56 . pp. 29-37.

Ali, M. K. F. B. M. and Noor, N. M. and Yahaya, N. and Bakar, A. A. and Abdullah, A. and Masuri, M. A. and Ismail, M. (2016) Application of ultraviolet radiation to control microbiologically influenced corrosion: a case study on soil sample from mangrove. Journal of Engineering Science and Technology, 11 (12). pp. 1695-1704.

Ali, M. K. F. B. M. and Noor, N. M. and Yahaya, N. and Bakar, A. A. and Abdullah, A. and Masuri, M. A. and Ismail, M. (2016) Application of ultraviolet radiation to control microbiologically influenced corrosion: a case study on soil sample from mangrove. Journal of Engineering Science and Technology, 11 (12). pp. 1695-1704. ISSN 1823-4690

Venil, Chidambaram K. and Yusof, Nur Z. and Aruldass, Claira A. and Ahmad, Wan Azlina (2016) Application of violet pigment from Chromobacterium violaceum UTM5 in textile dyeing. Biologia, 71 (2). pp. 121-127.

Zoveidavianpoor, M. and Gharibi, A. (2016) Applications of type-2 fuzzy logic system: handling the uncertainty associated with candidate-well selection for hydraulic fracturing. Neural Computing and Applications, 27 (7). pp. 1831-1851.

Zoveidavianpoor, M. and Gharibi, A. (2016) Applications of type-2 fuzzy logic system: handling the uncertainty associated with candidate-well selection for hydraulic fracturing. Neural Computing and Applications, 27 (7). pp. 1831-1851. ISSN 0941-0643

Naffouti, T. and Zinoubi, J. and Che Sidik, N. A. and Maad, R. B. (2016) Applied thermal lattice Boltzmann model for fluid flow of free convection in 2-D enclosure with localized two active blocks: heat transfer optimization. Journal of Applied Fluid Mechanics, 9 (1). pp. 419-430.

Madni, S. H. H. and Latiff, M. S. A. and Coulibaly, Y. and Abdulhamid, S. M. (2016) An appraisal of meta-heuristic resource allocation techniques for IaaS cloud. Indian Journal of Science and Technology, 9 (4). pp. 1-14.

Ghani, F. B. A. and Wahab, R. A. and Aziz, A. A. (2016) Appropriacy of counselling approaches in assisting rape victims: a case study. Social Sciences (Pakistan), 11 (13). pp. 3238-3244.

Kasra-Kermanshahi, S. and Salleh, M. and Chizari, H. (2016) Appropriate lightweight cryptosystems for wireless sensor networks. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6296-6302.

Roslan, M. S. and Chaudary, K. and Haider Rizvi, S. Z. and Daud, S. and Ali, J. and Munajat, Y. (2016) Arc discharge synthesis of CNTs in hydrogen environment in presence of magnetic field. Jurnal Teknologi, 78 (3). pp. 257-260. ISSN 0127-9696

Baharudin, Nurul 'Athiqah and Ismail, Alice Sabrina (2016) Architectural style of dawah mosque in Malaysia: from vernacular to modern structures. International Journal of Built Environment and Sustainability, 3 (2). pp. 70-78. ISSN 2289-8948

Rahman, N. A. and Taher, S. and Alahamdi, F. and Nasir, K. A. M. (2016) Arid hydrological modeling at Wadi Alaqiq, Madinah, Saudi Arabia. Jurnal Teknologi, 78 (7). pp. 51-58. ISSN 0127-9696

Elhaj, Fatin A. and Salim, Naomie and Harris, Arief R. and Swee, Tan Tian and Ahmed, Taquia (2016) Arrhythmia recognition and classification using combined linear and nonlinear features of ECG signals. Computer Methods and Programs in Biomedicine, 127 . pp. 52-63.

Sayed Daud, Syarifah Noor Syakiylla and Sudirman, Rubita (2016) Artifact removal and brain rhythm decomposition for eeg signal using wavelet approach. Jurnal Teknologi, 78 (7-5). pp. 135-143. ISSN 0127-9696

Mas'ud, A. A. and Albarracín, R. and Ardila-Rey, J. A. and Muhammad-Sukki, F. and Illias, H. A. and Bani, N. A. and Munir, A. B. (2016) Artificial neural network application for partial discharge recognition: survey and future directions. Energies, 9 (8). pp. 1-18.

Khairi, M. T. M. and Ibrahim, S. and Yunus, M. A. M. and Faramarzi, M. and Yusuf, Z. (2016) Artificial neural network approach for predicting the water turbidity level using optical tomography. Arabian Journal for Science and Engineering, 41 (9). pp. 3369-3379.

Yusoff, R. M. and Kazi, A. G. and Khan, M. M. and Siddique, M. (2016) Assessing livelihood among entrepreneurs in Sindh Pakistan: Construct development and measurement. International Review of Management and Marketing, 6 (4). pp. 271-276. ISSN 2146-4405

Aziz, A. M. N. and Talib, N. A. (2016) Assessing service innovation and customer involvement in Malaysian mobile service provider. Social Sciences (Pakistan), 11 (11). pp. 2828-2835.

Nor Aziz, Ainul Mardhiyah and Abdul Talib, Noraini (2016) Assessing service innovation and customer involvement in Malaysian mobile service provider. Social Sciences (Pakistan), 11 (11). pp. 2828-2835. ISSN 1818-5800

Hu, Yonghong and Jia, Gensuo and Pohl, Christine and Zhang, Xiaoxuan and van Genderen, John (2016) Assessing surface albedo change and its induced radiation budget under rapid urbanization with Landsat and GLASS data. Theoretical and Applied Climatology, 123 (42433). pp. 711-722.

Azlina, M. Y. and Abdul Jalil, O. and Rohaizan, R. and Mohd. Najib, M. R. (2016) Assessing the effect of waterfront development in Malaysia. Social Sciences (Pakistan), 11 (11). pp. 2897-2901.

Bayat, A. E. and Rajaei, K. and Junin, R. (2016) Assessing the effects of nanoparticle type and concentration on the stability of CO2 foams and the performance in enhanced oil recovery. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 511 . pp. 222-231. ISSN 0927-7757

Ali, Esfandiari Bayat and Rajaei, Kourosh and Junin, Radzuan (2016) Assessing the effects of nanoparticle type and concentration on the stability of CO2 foams and the performance in enhanced oil recovery. Colloids and Surface A: Physicochemical and Engineering Aspects, 511 . pp. 222-231. ISSN 0927-7757

Moslehifar, M. A. and Ibrahim, N. A. and Sandaran, S. C. (2016) Assessing the quality of trust features on website content of top hospitals for medical tourism consumers. Jurnal Komunikasi: Malaysian Journal of Communication, 32 (1). pp. 469-489.

Moslehifar, Mohammad Ali and Ibrahim, Noor Aireen and Sandaran, Shanti C. (2016) Assessing the quality of trust features on website content of top hospitals for medical tourism consumers. Jurnal Komunikasi: Malaysian Journal of Communication, 32 (1). pp. 469-489. ISSN 2289-151X

Moslehifar, Mohammad Ali and Ibrahim, Noor Aireen and Sandaran, Shanti Chandran (2016) Assessing the quality of trust features on website content of top hospitals for medical tourism consumers Menilai kualiti ciri kepercayaan kandungan dalam laman jaringan hospital terbaik untuk konsumer pelancongan. Jurnal Komunikasi: Malaysian Journal of Communication, 32 (1). pp. 469-489. ISSN 2289-151X

Abdullah, N. and Fulazzaky, M. A. and Yong, E. L. and Yuzir, A. and Sallis, P. (2016) Assessing the treatment of acetaminophen-contaminated brewery wastewater by an anaerobic packed-bed reactor. Journal of Environmental Management, 168 . pp. 273-279.

Abdullah, N. and Fulazzaky, M. A. and Yong, E. L. and Yuzir, A. and Sallis, P. (2016) Assessing the treatment of acetaminophen-contaminated brewery wastewater by an anaerobic packed-bed reactor. Journal of Environmental Management, 168 . pp. 273-279. ISSN 0301-4797

Talib, Rohaya and Md. Supie, Hawa Syamsina and Kamsah, Mohd. Zaki and Abu Naim, Hamimah and Mohd. Yusof, Sanitah (2016) Assessment for learning : supervisory feedback practice in higher education. Man In India, 96 (1). pp. 39-47.

Talib, R. and Md. Supie, H. S. and Kamsah, M. Z. and Naim, H. A. and Mohd. Yusof, S. (2016) Assessment for learning: supervisory feedback practice in higher education. Man in India, 96 (1-2). pp. 39-47. ISSN 0025-1569

Galankashi, Masoud Rahiminezhad and Syed Ahmad Helmi, Syed Hassan (2016) Assessment of hybrid Lean-Agile (Leagile) supply chain strategies. Journal of Manufacturing Technology Management, 27 (4). pp. 470-482. ISSN 1741-038X

Priharti, W. and Samat, S. B. and Yasir, M. S. and Garba, N. N. (2016) Assessment of radiation hazard indices arising from natural radionuclides content of powdered milk in Malaysia. Journal of Radioanalytical and Nuclear Chemistry, 307 (1). pp. 297-303. ISSN 0236-5731

Vafaei, M. and Alih, S. C. (2016) Assessment of seismic design response factors of air traffic control towers. Bulletin of Earthquake Engineering, 14 (12). pp. 3441-3461.

Vafaei, M. and Alih, S. C. (2016) Assessment of seismic design response factors of air traffic control towers. Bulletin of Earthquake Engineering, 14 (12). pp. 3441-3461. ISSN 1570-761X

Ahmad, I. and Said, H. and Janan, M. J. M. and Sholihan, S. (2016) Assessment of service-learning in higher education: challenges and possibilities. Man in India, 96 (6). pp. 1623-1633. ISSN 0025-1569

Saeed, I. M. and Ramli, A. T. and Saleh, M. A. (2016) Assessment of sustainability in energy of Iraq, and achievable opportunities in the long run. Renewable and Sustainable Energy Reviews, 58 . pp. 1207-1215.

Noor, M. J. M. M. and Mohammad, T. A. and Ghazali, A. H. (2016) Assessment of using hollow fibre microfiltration in treating lake water. Desalination and Water Treatment, 57 (48-49). pp. 23232-23245.

Noor, M. J. M. M. and Mohammad, T. A. and Ghazali, A. H. (2016) Assessment of using hollow fibre microfiltration in treating lake water. Desalination and Water Treatment, 57 (48-49). pp. 23232-23245. ISSN 1944-3994

Mohammad, T. A. and Mohd Noor, M. J. M. and Ghazali, A. H. (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317.

Mohammad, T. A. and Mohd Noor, M. J. M. and Ghazali, A. H. (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317. ISSN 1944-3994

Shahabi, H. and Ahmad, B. A. and Ahmad, B. and Amiri, M. J. T. and Keihanfard, S. and Ebrahimi, S. (2016) Assessment of WLC and fuzzy logic methods for site selection of water reservoirs in Malaysia. Polish Journal of Environmental Studies, 25 (3). pp. 1223-1231.

Walmsley, T. G. and Atkins, M. J. and Tarighaleslami, A. H. and Liew, P. Y. (2016) Assisted heat transfer and shaft work targets for increased total site heat integration. Chemical Engineering Transactions, 52 . pp. 403-408. ISSN 2283-9216

Timothy, G. Walmsley and Martin, J. Atkins and Amir, H. Tarighaleslami and Liew, Peng Yen (2016) Assisted heat transfer and shaft work targets for increased total site heat integration. Chemical Engineering Transactions, 52 . pp. 403-408. ISSN 2283-9216

Chong, W. W. F. and Ng, J. H. (2016) An atomic-scale approach for biodiesel boundary lubricity characterisation. International Biodeterioration & Biodegradation, 113 . pp. 34-43.

Abdul-Kadir, N. A. and Mat Safri, N. and Othman, M. A. (2016) Atrial fibrillation classification and association between the natural frequency and the autonomic nervous system. International Journal of Cardiology, 222 . pp. 504-508.

Abdul-Kadir, N. A. and Mat Safri, N. and Othman, M. A. (2016) Atrial fibrillation classification and association between the natural frequency and the autonomic nervous system. International Journal of Cardiology, 222 . pp. 504-508. ISSN 0167-5273

Mohd Noor, R. and Ahmad, S. W. and Adnan, A. and Nazir, R. (2016) Attenuation function relationship of subduction mechanism and far field earthquake. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2597-2601.

Elbatran, A. H. A. and Yaakob, O. B. and Ahmed, Y. M. and Abdullah, F. B. (2016) Augmented diffuser for horizontal axis marine current turbine. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 235-245. ISSN 2088-8694

Saparudin, Saparudin and Sulong, G. (2016) An automatic fingerprint classification technique based on global features. IAENG International Journal of Computer Science, 43 (3). pp. 299-309. ISSN 1819-656X

Khokhar, Suhail and Mohd. Zin, Abdullah Asuhaimi and Mokhtar, Ahmad Safawi and Zareen, Naila (2016) Automatic pattern recognition of single and multiple power quality disturbances. Australian Journal of Electrical and Electronics Engineering, 13 (1). pp. 43-53. ISSN 1448-837X

Nagalingam, Manimaran and Abdul Rahim, Sharul Kamal (2016) A band notch rectangular patch UWB antenna with time domain analysis. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4720-4726. ISSN 1819-6608

Khaledian, Mohsen and Ismail, Razali and Akbari, Elnaz (2016) Band structures of graphene nanoscrolls and their dispersion relation near the Fermi point. RSC Advances, 6 (45). pp. 38753-38760. ISSN 2046-2069

Majid, H. A. and Rahim, M. K. A. and Hamid, M. R. and Murad, N. A. and Samsuri, N. A. and Yusof, M. F. M. and Kamarudin, M. R. (2016) Band-notched reconfigurable CPW-fed UWB antenna. Applied Physics A: Materials Science and Processing, 122 (4). ISSN 0947-8396

Sukur, M. I. A. and Rahim, M. K. A. and Murad, N. A. (2016) Bandwidth enhancement of rectangular dielectric resonator antenna using circular slot coupled technique. Microwave and Optical Technology Letters, 58 (3). pp. 505-509. ISSN 0895-2477

Samingan, M. L. and Rahim, S. K. A. and Idzam, M. and Ramli, M. R. (2016) Bandwidth enhancement on branch line coupler using magneto-dielectric polymer substrate (PDMS-Fe304). Journal of Telecommunication, Electronic and Computer Engineering, 8 (6). pp. 5-9. ISSN 2180-1843

Mansoul, A. and Ghanem, F. and Hamid, M. R. and Salonen, E. and Berg, M. (2016) Bandwidth reconfigurable antenna with a fixed lower and a variable upper limit. IET Microwaves, Antennas and Propagation, 10 (15). pp. 1725-1733. ISSN 1751-8725

Dashti, M. G. and Abdeshahian, P. (2016) Batch culture and repeated-batch culture of Cunninghamella bainieri 2A1 for lipid production as a comparative study. Saudi Journal of Biological Sciences, 23 (2). pp. 172-180. ISSN 1319-562X

Maina, I. and Abd. Rahman, T. and Khalily, M. and Zakwoi, S. I. (2016) Beam broadened radial line slot array antenna for fifth generation (5G) mobile broadband communication. Jurnal Teknologi, 78 (6-2). pp. 51-56. ISSN 0127-9696

Ibrahim, Maina and Abd. Rahman, Tharek and Khalily, Mohsen and Zakwoi, Solomon Iliya (2016) Beam broadened radial line slot array antenna for fifth generation (5g) mobile broadband communication. Jurnal Teknologi, 78 (6-2). pp. 51-56. ISSN 0127-9696

Marto, Aminaton and Nor, Aidil Rosly and Choy, Soon Tan and Kasim, Fauziah and Mohd. Yunus, Nor Zurairahetty and Moradi, Razieh (2016) Bearing capacity of soft clay installd with singular and group of encased bottom ash columns. Jurnal Teknologi, 78 (7-3). pp. 105-110. ISSN 2180-3722

Jafarkarimi, H. and Saadatdoost, R. and Sim, A. T. H. and Hee, J. M. (2016) Behavioral intention in social networking sites ethical dilemmas: an extended model based on Theory of Planned Behavior. Computers in Human Behavior, 62 . pp. 545-561. ISSN 0747-5632

Mustafa, S. F. Z. and Maarof, H. and Naser, M. A. and Abdallah, H. H. and Irfan, A. and Ahmed, R. (2016) Behavioral pattern exploration of single guest, hexadecane-1,16-diol and hexadecane in urea inclusion compounds via molecular dynamics simulation. Journal of Theoretical and Computational Chemistry, 15 (6). ISSN 0219-6336

Faridmehr, I. and Osman, M. H. and Tahir, M. M. and Azimi, M. and Gholami, M. (2016) Behaviour and design of cold-formed steel C-sections with cover plates under bending. International Journal of Steel Structures, 16 (2). pp. 587-600. ISSN 1598-2351

Alimohammadi, Payman and Kassim, Khairul Anuar and Nazir, Ramli (2016) Behaviour of expanded piles under upward loading due to radial preloading in soft clay. Arabian Journal of Geosciences, 9 (2). pp. 1-12. ISSN 1866-7511

Ma, C. K. and Awang, A. Z. and Garcia, R. and Omar, W. and Pilakoutas, K. (2016) Behaviour of over-reinforced high-strength concrete beams confined with post-tensioned steel straps - an experimental investigation. Structural Concrete, 17 (5). pp. 768-777. ISSN 1464-4177

Shukri, A. A. and Hosen, M. A. and Muhamad, R. and Jumaat, M. Z. (2016) Behaviour of precracked RC beams strengthened using the side-NSM technique. Construction and Building Materials, 123 . pp. 617-626. ISSN 0950-0618

Salleh, W. M. N. H. W. and Ahmad, F. and Khong, H. Y. and Zulkifli, R. M. and Chen, J. J. and Nahar, L. and Wansi, J. D. and Sarker, S. D. (2016) Beilschglabrines A and B: two new bioactive phenanthrene alkaloids from the stem bark of Beilschmiedia glabra. Phytochemistry Letters, 16 . pp. 192-196. ISSN 1874-3900

Mohd. Nawi, M. N. and Roslan, S. and Salleh, N. A. and Zulhumadi, F. and Harun, A. N. (2016) The benefits and challenges of E-procurement implementation: A case study of Malaysian company. International Journal of Economics and Financial Issues, 6 (7Speci). pp. 329-332. ISSN 2146-4138

Khan, Hidayat Ullah and Sarmin, Nor Haniza and Khan, Asghar and Khan, Faiz Muhammad (2016) Bi-ideals of ordered semigroups based on the interval-valued fuzzy point. Jurnal Teknologi, 78 (2). pp. 179-191. ISSN 0127-9696

Borodo, S. M. and Shamsuddin, S. M. and Hasan, S. (2016) Big data platforms and techniques. Indonesian Journal of Electrical Engineering and Computer Science, 1 (1). pp. 191-200. ISSN 2502-4752

Zaini, M. A. A. and Alias, N. and Yunus, M. A. C. (2016) Bio-polishing sludge adsorbents for dye removal. Polish Journal of Chemical Technology, 18 (4). pp. 15-21. ISSN 1509-8117

Mustapha, I. B. and Saeed, F. (2016) Bioactive molecule prediction using extreme gradient boosting. Molecules, 21 (8). ISSN 1420-3049

Umor, Noor Azrimi and Azmi, Musfirah and Jamroo, Noor Ashiqin and Khalil, Khalilah and Syed Muhammad, Syed Anuar Fauaad and Nik Mahmood, Nik Azmi (2016) Bioconversion of oil palm frond to reducing sugar in solid state fermentation by applying water-fed strategy. Journal of Engineering and Applied Sciences, 11 (9). pp. 1916-1920. ISSN 1816-949X

Arjmandi, Reza and Hassan, Azman and Mohamad Kassim, Mohamad Haafiz and Zakaria, Zainoha (2016) Biodegradability and thermal properties of hybrid montmorillonite/microcrystalline cellulose filled polylactic acid composites: effect of filler ratio. Polymers and Polymer Composites, 24 (9). pp. 741-746. ISSN 0967-3911

Lee, X. and Wahit, M. U. and Adrus, N. (2016) Biodegradable and temperature-responsive thermoset polyesters with renewable monomers. Journal of Applied Polymer Science, 133 (40). ISSN 0021-8995

Kardi, S. N. and Rashid, N. A. A. and Ibrahim, N. and Ahmad, A. (2016) Biodegradation of Remazol Black B in sequential microaerophilic-aerobic operations by NAR-2 bacterial consortium. Environmental Earth Sciences, 75 (16). ISSN 1866-6280

Seyedeh, Nazanin Kardi and Abdul Rashid, Noor Aini and Ibrahim, Norahim and Ahmad, Azura (2016) Biodegradation of remazol black b in sequential microaerophilic-aerobic operations by nar-2 bacterial consortium. Environmental Earth Sciences, 75 (16). p. 1172. ISSN 1866-6280

Adnan, L. A. and Hadibarata, T. and Sathishkumar, P. and Mohd. Yusoff, A. R. (2016) Biodegradation pathway of Acid Red 27 by white-rot fungus armillaria sp. F022 and phytotoxicity evaluation. Clean - Soil, Air, Water, 44 (3). pp. 239-246. ISSN 1863-0650

Zamberi, M. M. and Ani, F. N. (2016) Biodiesel production from high FFA rubber seed oil using waste cockles. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7782-7787. ISSN 1819-6608

Ganapathy, Birintha and Ying, Choy Yieng and Ibrahim, Norahim (2016) Bioelectricity generation based on acid red 27 decolourization in microbial fuel cell. Journal of Advanced Research in Applied Sciences and Engineering Applications, 5 (1). pp. 42-52. ISSN 2462-1943

Mohamad Lazim, Mazidatul Ashiqeen Balqiah and Neoh, Chin Hong and Lim, Chi Kim and Chong, Chun Shiong and Ibrahim, Zaharah (2016) Biofilm-coated macrocomposites for the treatment of high strength agricultural wastewater. Desalination and Water Treatment, 57 (8). pp. 3424-3429. ISSN 1944-3994

Lim, W. L. and Wibowo, A. and Desa, M. I. and Haron, H. (2016) A biogeography-based optimization algorithm hybridized with tabu search for the quadratic assignment problem. Computational Intelligence and Neuroscience, 2016 . ISSN 1687-5265

Azman, Nadia Farhana and Abdeshahian, Peyman and Kadier, Abudukeremu and Nasser Al-Shorgani, Najeeb Kaid Nasser and Salih, Noura K.M. and Lananan, Izzati and Abdul Hamid, Aidil and Kalil, Mohd. Sahaid (2016) Biohydrogen production from de-oiled rice bran as sustainable feedstock in fermentative process. International Journal of Hydrogen Energy, 41 (1). pp. 145-156. ISSN 0360-3199

Wahab, I. F. and Abd Razak, S. I. (2016) Bionanocomposite film of kappa-carrageenan / nanotube clay: growth of hydroxyl apatite and model drug release. Digest Journal of Nanomaterials and Biostructures, 11 (3). pp. 963-972. ISSN 1842-3582

Purwanto, M. and Atmaja, L. and Mohamed, M. A. and Salleh, M. T. and Jaafar, J. and Ismail, A. F. and Santoso, M. and Widiastuti, N. (2016) Biopolymer-based electrolyte membranes from chitosan incorporated with montmorillonite-crosslinked GPTMS for direct methanol fuel cells. RSC Advances, 6 (3). pp. 2314-2322. ISSN 2046-2069

Boumehira, A .Z. and Malek, R. A. and Othman, Mohd. Nor and Ware, I. and Ramli, S. and Malek, K. and Hacene, H. and El-Enshasy, H. A. (2016) Bioprocess development for β-and γ-rubromycin production: a human telomerase inhibitors, by Streptomyces sp. ADR1. Journal of Scientific and Industrial Research, 75 (10). pp. 609-614. ISSN 0022-4456

A. Rahim, Nur Izwinda and Ahmad, Wan Azlina (2016) Bioremediation of chromium(vi) to chromium(iii). EProceedings Chemistry, 1 (1). pp. 27-30. ISSN 2550-1453

Neoh, C. H. and Lam, C. Y. and Ghani, S. M. and Ware, I. and Sarip, S. H. M. and Ibrahim, Z. (2016) Bioremediation of high-strength agricultural wastewater using Ochrobactrum sp. strain SZ1. 3 Biotech, 6 (2). ISSN 2190-572X

Borhamdin, S. and Shamsuddin, M. and Alizadeh, A. (2016) Biostabilised icosahedral gold nanoparticles: synthesis, cyclic voltammetric studies and catalytic activity towards 4-nitrophenol reduction. Journal of Experimental Nanoscience, 11 (7). pp. 518-530. ISSN 1745-8080

Kristanti, R. A. and Fikri Ahmad Zubir, M. M. and Hadibarata, T. (2016) Biotransformation studies of cresol red by Absidia spinosa M15. Journal of Environmental Management, 172 . pp. 107-111. ISSN 0301-4797

Ahmad, Fauzan and Ibrahim, Mohd. Haniff and Sulaiman, Wadi Harun and Zuikafly, Siti Nur Fatin and Muhamad Apandi, Nur Hidayah (2016) Bismuth (III) Telluride (Bi2Te3) embedded in PVA as a passive saturable absorber in a 2 micron region. Photonics Letters of Poland, 8 (4). pp. 101-103. ISSN 2080-2242

Ahmad, H. and Salim, M. A. M. and Thambiratnam, K. and Norizan, S. F. and Harun, S. W. (2016) A black phosphorus-based tunable Q-switched ytterbium fiber laser. Laser Physics Letters, 13 (9). ISSN 1612-2011

Ismail, R. and Ismail, Z. and Yusof, Y. M. (2016) Blended learning environment in tertiary education: a meta-analysis. Advanced Science Letters, 22 (12). pp. 4263-4266. ISSN 1936-6612

Lawan, Mustapha Muhammad and Md. Tahir, Mahmood and Mirza, Jahangir (2016) Bolted shear connectors performance in self-compacting concrete integrated with cold-formed steel section. Latin American Journal of Solids and Structures, 13 (4). pp. 731-749. ISSN 1679-7817

Liew, S. S. and Khalil-Hani, M. and Bakhteri, R. (2016) Bounded activation functions for enhanced training stability of deep neural networks on visual pattern recognition problems. Neurocomputing, 216 . pp. 718-734. ISSN 0925-2312

Liew, S. S. and Khalil-Hani, M. and Bakhteri, R. (2016) Bounded activation functions for enhanced training stability of deep neural networks on visual pattern recognition problems. Neurocomputing, 216 . pp. 718-734. ISSN 0925-2312

Ishak, M. R. and Abu Bakar, A. R. and Belhocine, A. and Taib, J. M. and Omar, W. Z. W. (2016) Brake torque analysis of fully mechanical parking brake system: theoretical and experimental approach. Measurement: Journal of the International Measurement Confederation, 94 . pp. 487-497. ISSN 0263-2241

Jamail, N. A. M. and Zarujhan, N. A. A. N. and Muhamad, N. A. (2016) Breakdown characteristic of LLDPE-NR nanocomposite using high voltage direct, current (HVDC) test. International Journal of Simulation: Systems, Science and Technology, 17 (41). 38.1-38.5. ISSN 1473-8031

Mohammad, J. and Quoquab, F. and Makhbul, Z. M. and Ramayah, T. (2016) Bridging the gap between justice and citizenship behavior in Asian culture. Cross Cultural and Strategic Management, 23 (4). pp. 633-656. ISSN 2059-5794

Al-Azawi, Mohammed A. and Bidin, Noriah and Abbas, Khaldoon N. and Bououdina, Mohamed and Azzez, Shrook A. (2016) Broadband optical absorption enhancement of N719 dye in ethanol by gold-silver alloy nanoparticles fabricated under laser ablation technique. Journal of Nanophotonics, 10 (2). ISSN 1934-2608

Rifin, S. N. M. and Zulkifli, M. Z. and Hassan, S. N. M. and Munajat, Y. and Ahmad, H. (2016) Broadband supercontinuum generation with femtosecond pulse width in erbium-doped fiber laser (EDFL). Laser Physics, 26 (11). ISSN 1054-660X

Ahmad, H. and Hassan, S. N. M. and Ahmad, F. and Zulkifli, M. Z. and Harun, S. W. (2016) Broadband tuning in a passively Q-switched erbium doped fiber laser (EDFL) via multiwall carbon nanotubes/polyvinyl alcohol (MWCNT/PVA) saturable absorber. Optics Communications, 365 . pp. 54-60. ISSN 0030-4018

Mohamad Nor, M. H. and Ismail, Z. H. and Ahmad, M. A. (2016) Broadcast control of multi-agent systems for assembling at unspecified point with collision avoidance. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 75-79. ISSN 2180-1843

Van, Ngoc Sang and Bilal Ali, Mohamad and Abd. Halim, Noor Dayana (2016) Building Cham - Vietnamese electronic dictionary. Jurnal Pendidikan Nusantara . pp. 215-223. ISSN 2289-9375

Ali, K. N. and Mustaffa, N. E. and Keat, Q. J. and Enegbuma, W. I. (2016) Building Information Modelling (BIM) educational framework for quantity surveying students: the Malaysian perspective. Journal of Information Technology in Construction, 21 . pp. 140-151. ISSN 1874-4753

Jamil, Farhan and Ismail, Kamariah and Siddique, Muhammad and Khan, Muhammad Muddassar and Kazi, Abdul Ghafoor and Qureshi, Muhammd Imran (2016) Business incubators in Asian developing countries. International Review of Management and Marketing, 6 (4). pp. 291-295. ISSN 2146-4405

Hasan, N. A. and Miskon, S. and Ahmad, N. and Ali, N. M. and Hashim, H. and Abdullah, N. S. and Alias, R. A. and Maarof, M. A. (2016) Business intelligence readiness factors for higher education institution. Journal of Theoretical and Applied Information Technology, 89 (1). pp. 156-163. ISSN 1992-8645

Soltanizadeh, S. and Abdul Rasid, S. Z. and Mottaghi Golshan, N. and Wan Ismail, W. K. (2016) Business strategy, enterprise risk management and organizational performance. Management Research Review, 39 (9). pp. 1016-1033. ISSN 2040-8269

Ismail, Z. H. and Muharram, I. A. M. (2016) Calibration of a drag tilt current velocimeter for an open channel application. Jurnal Teknologi, 78 (6-13). pp. 89-94. ISSN 0127-9696

Ab. Talib, Mohamed Syazwan and Abdul Hamid, Abu Bakar and Chin, Thoo Ai (2016) Can halal certification influence logistics performance? Journal of Islamic Marketing, 7 (4). pp. 461-475. ISSN 1759-0833

Ab. Talib, M. S. and Abdul Hamid, A. B. and Chin, T. A. (2016) Can halal certification influence logistics performance? Journal of Islamic Marketing, 7 (4). pp. 461-475. ISSN 1759-0833

Md. Mustam, Saizalmursidi and Syed Yusof, Sharifah Kamilah and Zubair, Suleiman (2016) Capacity and delay spread in multilayer diffusion-based molecular communication (DBMC) channel. IEEE Transactions on Nano Bioscience, 15 (7). pp. 599-612. ISSN 1536-1241

MustaAmal, A. H. and Norman, E. W. L. and Rosmin, N. and Jabor, M. K. (2016) Capturing creative behaviours in computer aided designing using design diaries. Man in India, 96 (1-2). pp. 667-674. ISSN 0025-1569

Halim, H. A. and Ahmad, N. H. and Ramayah, T. and Taghizadeh, S. K. (2016) Capturing the ‘pioneering minds’ via human capital: the impact on innovative performance of Malaysian SMEs. Asian Academy of Management Journal, 21 . pp. 105-126. ISSN 1394-2603

Badrul Hisham, A. A. and Aujih, A. B. and Izran Ishak, M. H. and Zainal Abidin, M. S. (2016) Car position and orientation based driving skill metric for analytical driving skill index evaluator. Jurnal Teknologi, 78 (7-4). pp. 27-33. ISSN 0127-9696

Zainol, M. M. and Asmadi, M. and Amin, N. A. S. and Ahmad, K. (2016) Carbon cryogel microsphere for ethyl levulinate production: effect of carbonization temperature and time. Journal of Engineering Science and Technology, 11 (Specia). pp. 108-121. ISSN 1823-4690

Mukhtar, N. H. and See, H. H. (2016) Carbonaceous nanomaterials immobilised mixed matrix membrane microextraction for the determination of polycyclic aromatic hydrocarbons in sewage pond water samples. Analytica Chimica Acta, 931 . pp. 57-63. ISSN 0003-2670

Hidayat, Ullah Khan and Khan, Asghar and Sarmin, Nor Haniza (2016) Cartesian product of interval-valued fuzzy ideals in ordered semigroup. Journal of Prime Research in Mathematics, 12 (1). pp. 120-129. ISSN 1817-3462

Salahshour, M. and Dahlan, H. M. and Iahad, N. A. (2016) A case of academic social networking sites usage in Malaysia: drivers, benefits, and barriers. International Journal of Information Technologies and Systems Approach, 9 (2). pp. 88-99. ISSN 1935-570X

Abd. Wahab, Rohani and Abdullah, Abdul Halim and Abu, Mohd. Salleh and Mokhtar, Mahan and Atan, Noor Azean (2016) A case study on visual spatial skills and level of geometric thinking in learning 3D geometry among high achievers. Man in India, 96 (1-2). pp. 489-499. ISSN 0025-1569

Karrahemi, Kiarash Ehtiat and Abdul Rasid, Siti Zaleha and Basiruddin, Rohaida (2016) Cash holdings and corporate governance: an empirical study on Malaysian public listed companies. Afro-Asian Journal of Finance and Accounting, 6 (4). pp. 305-317. ISSN 1751-6447

Muhamad Yusoff, Muhamad Roslan and Songip, Ahmad Rahman and Baroto, Mas Bambang and Ariffin, Aini Suzana (2016) Catalysing growth through board members engagement in strategy execution. Studia Ubb Negotia, 61 (3). pp. 117-128.

Wong, S. and Ngadi, N. and Tuan Abdullah, T. A. and Inuwa, I. M. (2016) Catalytic cracking of LDPE dissolved in benzene using nickel-impregnated zeolites. Industrial and Engineering Chemistry Research, 55 (9). pp. 2543-2555. ISSN 0888-5885

Shamsudin, S. and Mohd. Radzi, N. I. and Othman, R. (2016) Causal ambiguity in lean production implementation in Malaysia. Journal of Asia-Pacific Business, 17 (3). pp. 249-266. ISSN 1059-9231

Sultana, Naznin and Zainal, Anisah (2016) Cellulose acetate electrospun nanofibrous membrane: fabrication, characterization, drug loading and antibacterial properties. Bulletin of Materials Science, 39 (2). pp. 337-343. ISSN 0250-4707

Amini, Neda and Abdul Majid, Fadzilah Adibah and Marvibaigi, Mohsen and Supriyanto, Eko and Jaganathan, Saravana Kumar and Tet Soon, Wong Tet and Nasiri, Rozita and Hamzehalipour, Javad (2016) Cervicare™ induces apoptosis in HeLa and CaSki cells through ROS production and loss of mitochondrial membrane potential. RSC Advances, 6 (29). pp. 24391-24417. ISSN 2046-2069

Shin, Chin Yung and Mohd. Ghazali, Normah (2016) CFD simulation of a plate heat exchanger with trapezoidal chevron. Jurnal Teknologi, 78 (8-4). pp. 19-24. ISSN 0127-9696

Tan, Y. C. and Chow, C. M. and Koo, K. S. and Nazir, R. (2016) Challenges in design and construction of deep excavation for KVMRT in Kuala Lumpur limestone formation. Jurnal Teknologi, 78 (8-5). pp. 97-107. ISSN 0127-9696

Tahir, L. M. and Lee, S. L. and Musah, M. B. and Jaffri, H. and Said, M. N. H. M. and Yasin, M. H. M. (2016) Challenges in distributed leadership: evidence from the perspective of headteachers. International Journal of Educational Management, 30 (6). pp. 848-863. ISSN 0951-354X

Wu, H. and Wang, X. and Shahid, S. and Ye, M. (2016) Changing characteristics of the water consumption structure in Nanjing city, Southern China. Water (Switzerland), 8 (8). ISSN 2073-4441

Nunoo, S. and Chude Okonkwo, U. A. K. and Ngah, R. and Chude Olisah, C. and Zahedi, Y. K. (2016) Channel measurement and time dispersion analysis for outdoor mobile ultrawideband environment. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (6). pp. 4555-4568. ISSN 1300-0632

Taibin, Y. and Mandela, A. A. and Idrus, S. M. and Zulkifli, N. (2016) Channel monitored channel duplexer for optimization of bidirectional passive optical network. Jurnal Teknologi, 78 (3). pp. 173-177. ISSN 0127-9696

Mustafa, M. W. and Abdilahi, A. M. and Mustapha, M. (2016) Chaos-enhanced cuckoo search for economic dispatch with valve point effects. Telkomnika (Telecommunication Computing Electronics and Control), 14 (4). pp. 1220-1227. ISSN 1693-6930

Alhassan, Hashim Mohammed and Mashros, Nordiana (2016) Characterisation and modelling of pedestrian flows in hospital and academic environments. Jurnal Teknologi, 78 (4). pp. 49-57. ISSN 0127-9696

Md Dana, Mohd. Firdaus and Mohamad, Edy Tonnizam and Komoo, Ibrahim (2016) Characteristics of boulders formed in tropical weathered granite: a review. Jurnal Teknologi, 78 (8-6). pp. 23-30. ISSN 01279696

Islam, Mohammad Saiful and Mohammad, Abu Bakar and Al-Gailani, Samir A. (2016) Characteristics of free space optics communication link in an unusual haze. Indian Journal of Pure and Applied Physics, 54 (1). pp. 46-50. ISSN 0019-5596

Hamza, Usman D. and Nasri, Noor S. and S. Amin, Nor Aishah and Mohammed, Jibril and M. Zain, Husna (2016) Characteristics of oil palm shell biochar and activated carbon prepared at different carbonization times. Desalination and Water Treatment, 57 (17). pp. 7999-8006. ISSN 1944-3994

Nezhad Khalil Abad, Seyed Vahid Alavi and Tugrul, Atiye and Gokceoglu, Candan and Jahed Armaghani, Danial (2016) Characteristics of weathering zones of granitic rocks in Malaysia for geotechnical engineering design. Engineering Geology, 200 . pp. 94-103. ISSN 0013-7952

Jou, S. K. and Malek, N. A. N. N. (2016) Characterization and antibacterial activity of chlorhexidine loaded silver-kaolinite. Applied Clay Science, 127-12 . pp. 1-9. ISSN 0169-1317

Mad Salim, Mashitah and Nik Malek, Nik Ahmad Nizam (2016) Characterization and antibacterial activity of silver exchanged regenerated NaY zeolite from surfactant-modified NaY zeolite. Materials Science and Engineering C, 59 . pp. 70-77. ISSN 0928-4931

Yahya, N. Y. and Ngadi, N. and Jusoh, M. and Halim, N. A. A. (2016) Characterization and parametric study of mesoporous calcium titanate catalyst for transesterification of waste cooking oil into biodiesel. Energy Conversion and Management, 129 . pp. 275-283. ISSN 0196-8904

Idumah, Christopher Igwe and Hassan, Azman (2016) Characterization and preparation of conductive exfoliated graphene nanoplatelets kenaf fibre hybrid polypropylene composites. Synthetic Metals, 212 . pp. 91-104. ISSN 0379-6779

Chan, C. S. and Sin, L. L. and Chan, K. G. and Shamsir, M. S. and Manan, F. A. and Sani, R. K. and Goh, K. M. (2016) Characterization of a glucose-tolerant β-glucosidase from Anoxybacillus sp. DT3-1. Biotechnology for Biofuels, 9 (1). ISSN 1754-6834

Kamaruzaman, N. B. and Saat, A. (2016) Characterization of a short microchannel device for surface cooling. Jurnal Teknologi, 78 (8-4). pp. 25-30. ISSN 0127-9696

Kahar, U. M. and Ng, C. L. and Chan, K. G. and Goh, K. M. (2016) Characterization of a type I pullulanase from Anoxybacillus sp. SK3-4 reveals an unusual substrate hydrolysis. Applied Microbiology and Biotechnology, 100 (14). pp. 6291-6307. ISSN 0175-7598

Zoveidavianpoor, M. and Gharibi, A. (2016) Characterization of agro-waste resources for potential use as proppant in hydraulic fracturing. Journal of Natural Gas Science and Engineering, 36 . pp. 679-691. ISSN 1875-5100

Edbeib, Mohamed Faraj Abdulgader and Abdul Wahab, Roswanira and Huyop, Fahrul (2016) Characterization of an α-haloalkanoic acid-degrading Pseudomonas aeruginosa MX1 isolated from contaminated seawater. Bioremediation Journal, 20 (2). pp. 89-97. ISSN 1088-9868

Mohsin, Ali Kame and Bidin, Noriah and Aadim, Kadhim Abdulwahid (2016) Characterization of cadmium sulfide/titania heterostructure films by utilizing microstructure and optical characteristics. Materials Science in Semiconductor Processing, 42 . pp. 319-325. ISSN 1369-8001

Hon Tan, W. and Lee, S. L. and Ng, J. H. and Fong Chong, W. W. and Chong, C. T. (2016) Characterization of carbon nanotubes synthesized from hydrocarbon-rich flame. International Journal of Technology, 7 (2). pp. 343-351. ISSN 2086-9614

Mahad, F. D. and Supaat, A. S. M. and Forsyth, D. and Sun, T. and Azmi, A. I. (2016) Characterization of erbium doped photonic crystal fiber. Telkomnika (Telecommunication Computing Electronics and Control), 14 (3). pp. 880-886. ISSN 1693-6930

Jarial, Rini and Shard, A. and Thakur, Sveta and Sakinah, Abdul Munaim and Zularisam, Abd. Wahid and Rezania, Shahabaldin and Kanwar, Shamsher Singh and Singh, Lakhveer (2016) Characterization of flavonoids from fern Cheilanthes tenuifolia and evaluation of antioxidant, antimicrobial and anticancer activities. Journal of King Saud University - Science . ISSN 1018-3647 (In Press)

Mustapha, N. and Khairuddin, N. and Muhamad, I. I. and Hashim, S. and Siddique, M. B. M. (2016) Characterization of HEC/PANI film as a potential electroactive packaging with pH Sensor. Sains Malaysiana, 45 (7). pp. 1169-1176. ISSN 0126-6039

Lari, Alireza and Sultana, Naznin (2016) Characterization of hydroxyapatite/polypyrrole/poly (caprolactone) based solvent cast thin films. ARPN Journal of Engineering and Applied Sciences, 11 (13). pp. 8385-8388. ISSN 1819-6608

Fallahiarezoudar, E. and Ahmadipourroudposht, M. and Idris, A. and Yusof, N. M. and Marvibaigi, M. and Irfan, M. (2016) Characterization of maghemite (γ-Fe2O3)-loaded poly-l-lactic acid/thermoplastic polyurethane electrospun mats for soft tissue engineering. Journal of Materials Science, 51 (18). pp. 8361-8381. ISSN 0022-2461

Khairuddin, T. K. A. and Lionheart, W. R. B. (2016) Characterization of objects by electrosensing fish based on the first order polarization tensor. Bioinspiration and Biomimetics, 11 (5). ISSN 1748-3182

Chonga, Jia Cherng and Lee, Siew Ling and Bidin, Noriah (2016) Characterization of photochemically initiated gold nanoparticles synthesized via incoherent ultraviolet radiation. Jurnal Teknologi, 78 (3-2). pp. 165-170. ISSN 0127-9696

Ahmed, Kamal and Shahid, Shamsuddin and Harun, Sobri and Wang, Xiao Jun (2016) Characterization of seasonal droughts in Balochistan Province, Pakistan. Stochastic Environmental Research and Risk Assessment, 30 (2). pp. 747-762. ISSN 1436-3240

Yaakop, A. S. and Chan, K. G. and Ee, R. and Lim, Y. L. and Lee, S. K. and Manan, F. A. and Goh, K. M. (2016) Characterization of the mechanism of prolonged adaptation to osmotic stress of Jeotgalibacillus malaysiensis via genome and transcriptome sequencing analyses. Scientific Reports, 6 . ISSN 2045-2322

Albrka Ali, Shaban Imael and Ismail, Amiruddin and Md. Yusoff, Nur Izzi and Abdul Hassan, Norhidayah and Ibrahim, Ahmad Nazrul Hakimi (2016) Characterization of the performance of aluminum oxide nanoparticles modified asphalt binder. Jurnal Teknologi, 78 (4). pp. 91-96. ISSN 0127-9696

Kosnan, H. Z. and Mat Safri, N. and Zakaria, N. A. and Khalid, P. I. (2016) Characterization of young children with preferred and non-preferred graphic rule during drawing. Jurnal Teknologi, 78 (7-5). pp. 89-96. ISSN 0127-9696

Mohamad, H. and Tee, B. P. and Ang, K. A. and Chong, M. F. (2016) Characterizing anomalies in distributed strain measurements of cast-in-situ bored piles. Jurnal Teknologi, 78 (8-5). pp. 75-82. ISSN 0127-9696

Jafari, H. and Hessam, H. and Shahri, S. M. G. and Assadian, M. and Shairazifard, S. H. P. and Idris, M. H. (2016) Characterizing sintered nano-hydroxyapatite sol-gel coating deposited on a biomedical Ti-Zr-Nb alloy. Journal of Materials Engineering and Performance, 25 (3). pp. 901-909. ISSN 1059-9495

Jamaludin, J. and Rahim, R. A. and Rahim, H. A. and Fazalul Rahiman, M. H. and Mohd. Muji, S. Z. and Rohani, J. M. (2016) Charge coupled device based on optical tomography system in detecting air bubbles in crystal clear water. Flow Measurement and Instrumentation, 50 . pp. 13-25. ISSN 0955-5986

Ling, H. H. and Eteng, A. A. and Leow, C. Y. and Abdul Rahim, S. K. and Chew, B. W. (2016) Charging management protocol for near field communication charging. Jurnal Teknologi, 78 (6-2). pp. 85-90. ISSN 0127-9696

Wan Salleh, Wan Mohd. Nuzul Hakimi and Ahmad, Farediah and Yen, Khong Heng and Zulkifli, Razauden Mohamed (2016) Chemical composition and biological activities of essential oil of Beilschmiedia pulverulenta. Pharmaceutical Biology, 54 (2). pp. 322-330. ISSN 1388-0209

Jani, Nor Akmalazura and Mohd. Sirat, Hasnah and Ahmad, Farediah and Mohamad Ali, Nor Azah and Zainal, Muhd. Hafizi (2016) Chemical composition, antibacterial and α-glucosidase inhibitory activities of the essential oils of Neolitsea coccinea (lauraceae). Natural Product Communications, 11 (12). pp. 1899-1902. ISSN 1934-578X

On, S. and Aminudin, N. I. and Ahmad, F. and Sirat, H. M. and Taher, M. (2016) Chemical constituents from stem bark of Garcinia prainiana and their bioactivities. International Journal of Pharmacognosy and Phytochemical Research, 8 (5). pp. 756-760. ISSN 0975-4873

Azahar, W. N. A. W. and Bujang, M. and Jaya, R. P. and Hainin, M. R. and Ngadi, N. and Mohamad, M. (2016) Chemical identification of waste cooking oil as additive in Bitumen. Key Engineering Materials, 700 . pp. 207-215. ISSN 1013-9826

Azahar, W. N. A. W. and Jaya, R. P. and Hainin, M. R. and Bujang, M. and Ngadi, N. (2016) Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder. Construction and Building Materials, 126 . pp. 218-226. ISSN 0950-0618

Ahmad, A. and Khatoon, A. and Mohd-Setapar, S. H. and Kumar, R. and Rafatullah, M. (2016) Chemically oxidized pineapple fruit peel for the biosorption of heavy metals from aqueous solutions. Desalination and Water Treatment, 57 (14). pp. 6432-6442. ISSN 1944-3994

Lee, Jenny Cheng Oi and Arshad, Mohammad Yusof (2016) Chemistry teachers views of models of teaching and learning in practical work in Malaysia. Man in India, 96 (6). pp. 1635-1647. ISSN 0025-1569

Kamyab, H. and Din, M. F. M. and Ghoshal, S. K. and Lee, C. T. and Keyvanfar, A. and Bavafa, A. A. and Rezania, S. and Lim, J. S. (2016) Chlorella pyrenoidosa mediated lipid production using Malaysian agricultural wastewater: effects of photon and carbon. Waste and Biomass Valorization, 7 (4). pp. 779-788. ISSN 1877-2641

Jayanti, D. S. and Mirza, J. and Jaya, R. P. and Abu Bakar, B. H. and Hassan, N. A. and Hainin, M. R. (2016) Chloride penetration of RHA concrete under marine environment. Proceedings of the Institution of Civil Engineers: Maritime Engineering, 169 (2). pp. 76-85. ISSN 1741-7597

Shah, M. K. K. and Sirat, H. M. and Jamil, S. (2016) Cholinesterase inhibitors from heartwood of artocarpus fulvicortex F. M. Jarret (Moraceae). Jurnal Teknologi, 78 (6). pp. 185-189. ISSN 0127-9696

Ishak, A. F. and Abdul Karim, N. and Ahmad, W. A. and Zakaria, Z. A. (2016) Chromate detoxification using combination of ChromeBac™ system and immobilized chromate reductase beads. International Biodeterioration and Biodegradation, 113 . pp. 238-243. ISSN 0964-8305

Gouldson, A. and Colenbrander, S. and Sudmant, A. and Papargyropoulou, E. and Kerr, N. and McAnulla, F. and Hall, S. (2016) Cities and climate change mitigation: economic opportunities and governance challenges in Asia. Cities, 54 . pp. 11-19. ISSN 0264-2751

Shu Chi, L. and Marsono, A. K. and Md. Tap, M. (2016) Clamping and interlocking effects on IBS block house system in comparison with conventional house system. Jurnal Teknologi, 78 (11). pp. 93-102. ISSN 0127-9696

Norafifah, H. and Noor Adila, A. S. and Noordin, M. Y. and Wong, K. Y. and Izman, S. (2016) Clarification of factors that affect the flux performance of hollow fiber membranes during ultrafiltration using design of experiments. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10750-10756. ISSN 1819-6608

Abu, M. Y. and Jamaluddin, K. R. and Zakaria, M. A. (2016) Classification of crankshaft remanufacturing using Mahalanobis-Taguchi system. International Journal of Automotive and Mechanical Engineering, 13 (2). pp. 3413-3422. ISSN 2229-8649

Talib, M. F. and Othman, M. F. and Azli, N. H. N. (2016) Classification of machine fault using principle component analysis, general regression neural network and probabilistic neural network. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 93-98. ISSN 2180-1843

Talib, Muhamad Farihin and Nor Azli, Nor Hayati and Othman, Mohd. Fauzi (2016) Classification of machine fault using principle component analysis, general regression neural network and probabilistic neural network. Journal of Telecommunication, Electronic & Computer Engineering, 8 (11). pp. 93-98. ISSN 2180-1843

Khan, H. U. and Sarmin, N. H. and Khan, A. and Khan, F. M. (2016) Classification of ordered semigroups in terms of generalized interval-valued fuzzy interior ideals. Journal of Intelligent Systems, 25 (2). pp. 297-318. ISSN 0334-1860

Azri, S. and Ujang, U. and Castro, F. A. and Rahman, A. A. and Mioc, D. (2016) Classified and clustered data constellation: an efficient approach of 3D urban data management. ISPRS Journal of Photogrammetry and Remote Sensing, 113 . pp. 30-42. ISSN 0924-2716

Shahid, Shamsuddin and Minhans, Anil (2016) Climate change and road safety: a review to assess impacts in Malaysia. Jurnal Teknologi, 78 (4). pp. 1-8. ISSN 0127-9696

Masud, M. M. and Al Amin, A. Q. and Junsheng, H. and Ahmed, F. and Yahaya, S. R. and Akhtar, R. and Banna, H. (2016) Climate change issue and theory of planned behaviour: Relationship by empirical evidence. Journal of Cleaner Production, 113 . pp. 613-623. ISSN 0959-6526

Rasiah, R. and Al-Amin, A. Q. and Ahmed, A. and Filho, W. L. and Calvo, E. (2016) Climate mitigation roadmap: assessing low carbon scenarios for Malaysia. Journal of Cleaner Production, 133 . pp. 272-283. ISSN 0959-6526

Shahid, S. and Wang, X. J. and Harun, S. B. and Shamsudin, S. B. and Ismail, T. and Minhans, A. (2016) Climate variability and changes in the major cities of Bangladesh: observations, possible impacts and adaptation. Regional Environmental Change, 16 (2). pp. 459-471. ISSN 1436-3798

Alhassan, A. and Danapalasingam, K. A. and Shehu, M. and Abdullahi, A. M. and Shehu, A. (2016) Closed-loop schemes for position and sway control of a gantry crane system. International Journal of Simulation: Systems, Science and Technology, 17 (32). ISSN 1473-8031

Zareei, M. and M. Muzahidul Islam, A. K. and Mansoor, N. and Baharun, S. and Mohamed, E. M. and Sampei, S. (2016) CMCS: a cross-layer mobility-aware MAC protocol for cognitive radio sensor networks. Eurasip Journal on Wireless Communications and Networking, 2016 (1). ISSN 1687-1472

Zareei, Mahdi and A. K. M., Muzahidul Islam and Mansoor, Nafees and Baharun, Sabariah and Ehab, Mahmoud Mohamed and Sampei, Seiichi (2016) CMCS: a cross-layer mobility-aware mac protocol for cognitive radio sensor networks. EURASIP Journal On Wireless Communications And Networking, 2016 (1). p. 160. ISSN 1687-1499

Nordin, Nadhirah and Majid, M. Rafee and Siong, Ho Chin and Kurata, Gakuji (2016) Co-benefit modeling and optimization of air pollution control in Iskandar Malaysia: a methodology using BenMap. Planning Malaysia, 4 (Specia). pp. 285-294. ISSN 1675-6215

Sidik, S. M. and Triwahyono, S. and Jalil, A. A. and Majid, Z. A. and Salamun, N. and Talib, N. B. and Abdullah, T. A. T. (2016) CO2 reforming of CH4 over Ni-Co/MSN for syngas production: role of Co as a binder and optimization using RSM. Chemical Engineering Journal, 295 . pp. 1-10. ISSN 1385-8947

Sidik, S. M. and Jalil, A. A. and Triwahyono, S. and Asli, U. A. (2016) CO2 reforming of methane over ni supported on mesostructured silica nanoparticles (NI/MSN): effect of NI loading. Jurnal Teknologi, 78 (8-3). pp. 13-18. ISSN 0127-9696

Chong, Yi Long and Yeo, Kee Jiar (2016) Cognitive ability and academic achievement of undergraduates. Man in India, 96 (6). pp. 1777-1786. ISSN 0025-1569

Hashim, S. and Mat Safri, N. and Othman, M. A. and Zakaria, N. A. (2016) Cognitive function assessment in young adult using trail making and stroop tests. Jurnal Teknologi, 78 (7-5). pp. 97-103. ISSN 0127-9696

Manaf, A. A. and Boroujerdizade, A. and Mousavi, S. M. (2016) Collusion-Resistant digital video watermarking for copyright protection application. International Journal of Applied Engineering Research, 11 (5). pp. 3484-3495. ISSN 0973-4562

Wahab, N. H. N. A. and Ismail, F. S. and Nawawi, M. A. A. (2016) Color transformation method for protanopia vision deficiency using artificial neural network. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 29-33. ISSN 2180-1843

Affam, Augustine Chioma and Chaudhuri, Malay and Mohamed Kutty, Shamsul Rahman and Muda, Khalida (2016) Combination of FeGAC/H2O2 advanced oxidation process and sequencing batch reactor for treatment pesticide wastewater. Environmental Earth Sciences, 75 (4). pp. 1-9. ISSN 1866-6280

Abujiya, Mu'Azu Ramat and Lee, Muhammad Hisyam and Riaz, Muhammad (2016) Combined application of Shewhart and cumulative sum R chart for monitoring process dispersion. Quality and Reliability Engineering International, 32 (1). pp. 51-67. ISSN 0748-8017

Nyakuma, B. B. and Jauro, A. and Oladokun, O. and Abdullah, T. A. T. and Uthman, H. (2016) Combustion kinetics of Shankodi-Jangwa coal. Journal of Physical Science, 27 (3). pp. 1-12. ISSN 1675-3402

Abu Dardak, Rozhan and Quoquab, Farzana (2016) Commercialization of the coconut dehusker and defibering machine: don’t lose your courage Md. Akhir. Emerald Emerging Markets Case Studies, 6 (2). pp. 1-18. ISSN 2045-0621

Abdullah, Mohd. Nasri and Jasmi, Kamarul Azmi (2016) Communication style towards student by excellent Islamic education lecturers in Teaching Education Institute of Malaysia. International Journal of Academic Research in Progressive Education and Development, 5 (3). pp. 19-31. ISSN 2226-6348

Osman, Mohamed Nasrun and Abdul Rahim, M. K. and Hamid, Mohamad Rijal and Mohd. Yusoff, Mohd. Fairus and A. Majid, Huda (2016) Compact dual-port polarization-reconfigurable antenna with high isolations for MIMO application. IEEE Antennas and Wireless Propagation Letters, 15 . pp. 456-459. ISSN 1536-1225

Hakimi, S. and Kamal Abdul Rahim, S. and Idzam Sabran, M. and Nyangwarimam Obadiah, A. and Mohamed, H. (2016) Compact MIMO antenna for indoor UWB applications. Microwave and Optical Technology Letters, 58 (10). pp. 2387-2393. ISSN 0895-2477

Amusan, Ajitoni S. and Khalid, Zarina M. (2016) A comparative analysis on the performance of Lehman type II inverse Gaussian model and standard inverse Gaussian model in terms of flexibility. Global Journal of Pure and Applied Mathematics, 12 (5). pp. 4535-4552. ISSN 0973-1768

Oluwasola, E. A. and Hainin, M. R. and Aziz, M. M. A. (2016) Comparative evaluation of dense-graded and gap-graded asphalt mix incorporating electric arc furnace steel slag and copper mine tailings. Journal of Cleaner Production, 122 . pp. 315-325. ISSN 0959-6526

Harun, M. Y. and Che Yunus, M. A. and Ismail, M. H. S. and Morad, N. A. (2016) A comparative investigation on the effect of thermal treatments on the mechanical properties of oil palm fruitlet components. Journal of the Taiwan Institute of Chemical Engineers, 60 . pp. 582-587. ISSN 1876-1070

Mubarak, N. M. and Thobashinni, Manimaran and Abdullah, Ezzat Chan and Sahu, Jn (2016) Comparative kinetic study of removal of pb2+ ions and cr3+ ions from wastewater using carbon nanotubes produced using microwave heating. Journal of Carbon Research, 2 (1). p. 7. ISSN 23115629

Shariati, M. and Ramli Sulong, N. H. and Shariati, A. and Kueh, A. B. H. (2016) Comparative performance of channel and angle shear connectors in high strength concrete composites: an experimental study. Construction and Building Materials, 120 . pp. 382-392. ISSN 0950-0618

W. Salleh, Wan Mohd. Nuzul Hakimi and Ahmad, Farediah and Khong, Heng Yen and Mohamed Zulkifli, Razauden (2016) Comparative study of biological activities of extracts from three Malaysian Beilschmiedia species. Marmara Pharmaceutical Journal, 20 (3). pp. 224-231. ISSN 1309-0801

Memon, A. H. and Hamil, M. S. R. and Laghari, M. and Rithwan, F. and Zhari, S. and Saeed, M. A. A. and Ismail, Z. and Majid, A. M. S. A. (2016) A comparative study of conventional and supercritical fluid extraction methods for the recovery of secondary metabolites from Syzygium campanulatum Korth. Journal of Zhejiang University: Science B, 17 (9). pp. 683-691. ISSN 1673-1581

Hajalilou, A. and Mazlan, S. A. and Shameli, K. (2016) A comparative study of different concentrations of pure Zn powder effects on synthesis, structure, magnetic and microwave-absorbing properties in mechanically-alloyed Ni-Zn ferrite. Journal of Physics and Chemistry of Solids, 96-97 . pp. 49-59. ISSN 0022-3697

Ul Haq, B. and Ahmed, R. and Shaari, A. and Ali, N. and Al-Douri, Y. and Reshak, A. H. (2016) Comparative study of Fe doped ZnO based diluted and condensed magnetic semiconductors in wurtzite and zinc-blende structures by first-principles calculations. Materials Science in Semiconductor Processing, 43 . pp. 123-128. ISSN 1369-8001

Yakub, F. and Lee, S. and Mori, Y. (2016) Comparative study of MPC and LQC with disturbance rejection control for heavy vehicle rollover prevention in an inclement environment. Journal of Mechanical Science and Technology, 30 (8). pp. 3835-3845. ISSN 1738-494X

Abdul Rahman, Nor Farahwahidah and Phang, Fatin Aliah (2016) Comparing teachers scientific epistemological stances and development. Man in India, 96 (1-2). pp. 501-512. ISSN 0025-1569

Abdul Rahman, Nor Farahwahidah and Phang, Fatin Aliah (2016) Comparing teachers' scientific epistemological stances and development. Man in India, 96 (1-2). pp. 501-512. ISSN 0025-1569

Then, C. and Wai, O. K. and Elsayed, E. A. and Mustapha, W. Z. W. and Othman, N. Z. and Aziz, R. and Wadaan, M. and El Enshsay, H. A. (2016) Comparison between classical and statistical medium optimization approaches for high cell mass production of Azotobacter Vinelandii. Journal of Scientific and Industrial Research, 75 . pp. 231-238. ISSN 0022-4456

Suhari, N. N. Y. and Alias, N. and Gazy, A. and Che Teh, C. R. (2016) Comparison between controlled and uncontrolled spray-DIC modeling for dehydration process. Jurnal Teknologi, 78 (6). pp. 101-109. ISSN 0127-9696

Goudarzi, S. and Hassan, W. H. and Anisi, M. H. and Soleymani, S. A. (2016) Comparison between hybridized algorithm of GA–SA and ABC, GA, DE and PSO for vertical-handover in heterogeneous wireless networks. Sadhana - Academy Proceedings in Engineering Sciences, 41 (7). pp. 727-753. ISSN 0256-2499

Goudarzi, S. and Hassan, W. H. and Anisi, M. H. and Soleymani, S. A. (2016) Comparison between hybridized algorithm of GA–SA and ABC, GA, DE and PSO for vertical-handover in heterogeneous wireless networks. Sadhana - Academy Proceedings in Engineering Sciences, 41 (7). pp. 727-753. ISSN 0256-2499

Shilan, S. T. and Mazlan, S. A. and Ido, Y. and Hajalilou, A. and Jeyadevan, B. and Choi, S. B. and Yunus, N. A. (2016) A comparison of field-dependent rheological properties between spherical and plate-like carbonyl iron particles-based magneto-rheological fluids. Smart Materials and Structures, 25 (9). ISSN 0964-1726

Abdi, Behzad and Azwan, S. and Abdullah, Mohamed Ruslan and Ayob, Amran and Yahya, Mohd. Yazid (2016) Comparison of foam core sandwich panel and through-thickness polymer pin-reinforced foam core sandwich panel subject to indentation and flatwise compression loadings. Polymer Composites, 37 (2). pp. 612-619.

Al-Aboosi, Y. Y. and Bin Shaameri, A. Z. and Khamis, N. H. H. (2016) Comparison of methodologies for signal detection in underwater acoustic noise in shallow tropical waters. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3086-3094. ISSN 1819-6608

Hassim, Mimi Haryani (2016) Comparison of methods for assessing occupational health hazards in chemical process development and design phase. Current Opinion in Chemical Engineering, 14 (2016). pp. 137-149. ISSN 2211-3398

Jusoh, M. Z. and Din, N. C. and Dimon, M. N. (2016) Comparison of normal incident sound absorption coefficient of direct piercing carved wood panel for circular, geometry and floral design. Jurnal Teknologi, 78 (6-10). pp. 1-8. ISSN 0127-9696

Jumari, Nur Fazirah and Mohd. Yusof, Khairiyah (2016) Comparison of product quality estimation of propylene polymerization in loop reactors using artificial neural network models. Jurnal Teknologi, 78 (6-13). pp. 95-100. ISSN 0127-9696

Lai, L. W. and Idris, A. (2016) Comparison of steam-alkali-chemical and microwave-alkali pretreatment for enhancing the enzymatic saccharification of oil palm trunk. Renewable Energy, 99 . pp. 738-746. ISSN 0960-1481

Ameen, Odai Falah and Younus, Marwan Hafeedh and Raja Ibrahim, Raja Kamarulzaman and Abdul Rahman, Rosly (2016) Comparison of water level measurement performance for two different types of diaphragm using fiber bragg grating based optical sensors. Jurnal Teknologi, 78 (6-11). pp. 97-101. ISSN 0127-9696

Abubakar, M. and Mat Yajid, M. A. and Ahmad, N. (2016) Comparison of Weibull and normal probability distribution of flexural strength of dense and porous fired clay. Jurnal Teknologi, 78 (9). pp. 73-78. ISSN 0127-9696

Pritheega, M. (2016) Complex network tools to enable identification of a criminal community. Bulletin of the Australian Mathematical Society, 94 (2). pp. 350-352. ISSN 0004-9727

Abdullah, N. S. and Indulska, M. and Sadiq, S. (2016) Compliance management ontology - a shared conceptualization for research and practice in compliance management. Information Systems Frontiers, 18 (5). pp. 995-1020. ISSN 1387-3326

Van, Nguyenthuy and Said, Hamdan and Khan, Aqeel (2016) Components of an academic advising program standard for Malaysian public universities. Man in India, 96 (6). pp. 1691-1702. ISSN 0025-1569

Moradi, Mehdi and Naderipour, Amirreza and Moradi, Mohammad and Khairuddin, Azhar and Zareen, Naila and Mohd. Zin, Abdullah Asuhaimi (2016) A comprehensive comparison of facts devices for enhancing static voltage stability. Arpn Journal of Engineering and Applied Sciences, 11 (21). pp. 12602-12606. ISSN 1819-6608

Bhatti, A. R. and Salam, Z. and Aziz, M. J. B. A. and Yee, K. P. (2016) A comprehensive overview of electric vehicle charging using renewable energy. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 114-123. ISSN 2088-8694

Elijah, O. and Leow, C. Y. and Rahman, T. A. and Nunoo, S. and Iliya, S. Z. (2016) A comprehensive survey of pilot contamination in massive MIMO-5G system. IEEE Communications Surveys and Tutorials, 18 (2). pp. 905-923. ISSN 1553-877X

Ogunbode, Ezekiel Babatunde and Mohamad Yatim, Jamaludin and Ishak, Mohd. Yunus and Abdul Hamid, Hazlan and Abdul Aziz, Azmahani and Razavi, Masoud (2016) Compressive creep of kenaf bio-fibrous concrete composite under one dimensional stressing. Malaysian Journal of Civil Engineering (MJCE), 28 (3). pp. 279-289. ISSN 1823-7843

Ali, A. A. and Hashim, A. M. (2016) Computational Analysis of the Optical and Charge Transport Properties of Ultrasonic Spray Pyrolysis-Grown Zinc Oxide/Graphene Hybrid Structures. Nanoscale Research Letters, 11 (1). ISSN 1931-7573

Manas, N. H. A. and Bakar, F. D. A. and Md. Illias, R. (2016) Computational docking, molecular dynamics simulation and subsite structure analysis of a maltogenic amylase from Bacillus lehensis G1 provide insights into substrate and product specificity. Journal of Molecular Graphics and Modelling, 67 . pp. 1-13. ISSN 1093-3263

Abdul Rahim, N. A. and Ahmed, R. and Ul Haq, B. and Mohamad, M. and Shaari, A. and Ali, N. and Goumri-Said, S. (2016) Computational modeling and characterization of X-Bi (X = B, Al, Ga, In) compounds: Prospective optoelectronic materials for infrared/near infra applications. Computational Materials Science, 114 . pp. 40-46. ISSN 0927-0256

Ghani, I. B. A. and Yahaya, N. A. and Ibrahim, N. H. and Hasan, M. N. and Surif, J. (2016) Concept map: alternative assessment tool in laboratory learning of electrolysis. Advanced Science Letters, 22 (12). pp. 4216-4220. ISSN 1936-6612

Sharifmuddin, N. B. and Suwa, T. and Shaikh Salim, S. A. Z. (2016) Concept study of microgrid dispatch strategy for solar thermal power plant with thermal storage. Jurnal Teknologi, 78 (5-8). pp. 85-90. ISSN 0127-9696

Papargyropoulou, Effie and Wright, Nigel and Lozano, Rodrigo and Steinberger, Julia and Padfield, Rory and Ujang, Zaini (2016) Conceptual framework for the study of food waste generation and prevention in the hospitality sector. Waste Management, 49 . pp. 326-336. ISSN 0956-053X

Papargyropoulou, E. and Wright, N. and Lozano, R. and Steinberger, J. and Padfield, R. and Ujang, Z. (2016) Conceptual framework for the study of food waste generation and prevention in the hospitality sector. Waste Management, 49 . pp. 326-336. ISSN 0956-053X

Ying, K. S. and Jusoh, A. and Khalifah, Z. (2016) A conceptual model of tourist satisfaction. Pertanika Journal of Social Sciences and Humanities, 24 (1). pp. 505-518. ISSN 0128-7702

Mohamed Al-Balushi, Fatma and Bahari, Mahadi and Abdul Rahman, Azizah and Hashim, Haslina (2016) Conceptualization of e-Government integration studies. Journal Of Theoretical And Applied Information Technology, 89 (2). pp. 439-449.

Lee, Sing and Saw, Sor Heoh and Akel, Mohamad and Ali, Jalil and Kunze, Hans-Joachim and Kubes, Pavel and Paduch, Marion (2016) Conditions for radiative cooling and collapse in the plasma focus illustrated with numerical experiments on PF1000. IEEE Transactions On Plasma Science, 44 (2). pp. 165-173. ISSN 0093-3813

Choon, T. L. and Ujang, M. U. and Chin, T. A. and Eng, N. S. and Sen, G. L. and Abu Hasan, M. H. B. and Muhamad Shah, S. N. W. B. (2016) Condominium rights in Malaysia. Advanced Science Letters, 22 (12). pp. 4194-4196. ISSN 1936-6612

Tan, Liat Choon and Ujang, Muhamad Uznir and Thoo, Ai Chin and Ng, See Eng and Goh, Leong Sen and Abu Hasan, Mohd. Hanif and Muhamad Shah, Shaidatul Nur Wahidah (2016) Condominium rights in Malaysia. Advanced Science Letters, 22 (12). pp. 4194-4196. ISSN 1936-6612

Chang, Hui Chung and Sun, Tao and Sultana, Naznin and Lim, Mim Mim and Khan, Tareef Hayat and Ismail, Ahmad Fauzi (2016) Conductive PEDOT:PSS coated polylactide (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) electrospun membranes: fabrication and characterization. Materials Science And Engineering C, 61 . pp. 396-410.

Razak, S. I. A. and Dahli, F. N. and Wahab, I. F. and Kadir, M. R. A. and Muhamad, I. I. and Yusof, A. H. M. and Adeli, H. (2016) A conductive polylactic acid/polyaniline porous scaffold via freeze extraction for potential biomedical applications. Soft Materials, 14 (2). pp. 78-86. ISSN 1539-445X

Oke, Jonathan Ojo and Mustaamal, Aede Hatib and Ogundola, Peter Ilesanmi (2016) Confirmatory factor analysis of social environmental sub-components necessary for creativity development of building technology students in Nigeria technical colleges. Man In India, 96 (1). pp. 93-101. ISSN 0025-1569

Enegbuma, W. I. and Aliagha, G. U. and Ali, K. N. and Badiru, Y. Y. (2016) Confirmatory strategic information technology implementation for building information modelling adoption model. Journal of Construction in Developing Countries, 21 (2). pp. 113-129. ISSN 1823-6499

Mohd. Imam Ma’arof, Nurul Nazirah and Fisal, Norsheila (2016) Connectivity in mobile multihop relay network. Jurnal Teknologi, 78 (42500). pp. 44-50. ISSN 0127-9696

Mare, Thierry and Estelle, Patrice and Halelfadl, Salma and Mohd. Ghazali, Normah (2016) Consideration of carbon nanotube-based nanofluid in thermal transfer. Jurnal Teknologi, 78 (8-4). pp. 41-48. ISSN 0127-9696

Seah, Yieng Shing and Chwan, Dominic Yee Foo and H. Hassim, Mimi (2016) Considering fugitive emissions during the conceptual design stage. Chemical Engineering, 123 (11). pp. 58-64. ISSN 0009-2460

Mohamad Nordin, Norjulia and Ahmad Azli, Naziha and Nik Idris, Nik Rumzi and Ramlan, Nur Huda and Sutikno, Tole (2016) Constant frequency torque controller for DTC with multilevel inverter of induction machines. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 28-44. ISSN 2088-8694

Nordin, N. M. and Azli, N. A. and Idris, N. R. N. and Ramlan, N. H. and Sutikno, T. (2016) Constant frequency torque controller for DTC with multilevel inverter of induction machines. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 28-44. ISSN 2088-8694

Ebrahimi, M. and Kohkamar, M.M.A.S.J. and Soltani, M. (2016) The constitutionalist revolution and its impact on Irans political development. International Journal of Interdisciplinary Civic and Political Studies, 11 (1). pp. 35-46. ISSN 2327-0071

Fong, Ng Siew and Wan Mansor, Wan Fara Adlina and Salam, Abdul Rahim and Ibrahim, Noor Aireen and Md. Yusof, Masdinah Alauyah and Abdul Aziz, Azian and Abdullah, Tina and Zakaria, Mohamad Hassan (2016) Constructing literature review: e-tutors feedback and concern. Man in India, 96 (1-2). pp. 419-426. ISSN 0025-1569

Fong, Ng Siew and Wan Mansor, Wan Fara Adlina and Salam, Abdul Rahim and Ibrahim, Noor Aireen and Md. Yusof, Masdinah Alauyah and Abdul Aziz, Azian and Abdullah, Tina and Zakaria, Mohamad Hassan (2016) Constructing literature review: e-tutors' feedback and concern. Man in India, 96 (1). pp. 419-426. ISSN 0025-1569

Mah, Chooi Mei and Fujiwara, Takeshi and Ho, Chin Siong (2016) Construction and demolition waste generation rates for high-rise buildings in Malaysia. Waste Management and Research, 34 (12). pp. 1224-1230. ISSN 0734-242X

Mohd. Khairi, Mohd. Taufiq and Ibrahim, Sallehuddin and Md. Yunus, Mohd. Amri and Faramarzi, Mahdi (2016) Contact and non-contact ultrasonic measurement in the food industry: a review. Measurement Science and Technology, 27 (1). pp. 1-23. ISSN 0957-0233

Derasid, N. A. C. and MustaMal, A. H. and Mohd. Amin, N. F. and Husain, A. R. (2016) Content validity for innovation level of UTM undergarduate students: a quantitative approach. Man in India, 96 (1-2). pp. 477-488. ISSN 0025-1569

Akram, Muhammad and Saleh, Ali Taha and Wan Ibrahim, Wan Aini and Awan, Ahmed Sher and Hussain, Rafaqat (2016) Continuous microwave flow synthesis (CMFS) of nano-sized tin oxide: effect of precursor concentration. Ceramics International, 42 (7). pp. 8613-8619.

Bernardo, Allan B. I. and Salanga, Maria Guadalupe C. and Tjipto, Susana and Hutapea, Bonar and S. Yeung, Susanna and Khan, Aqeel (2016) Contrasting lay theories of polyculturalism and multiculturalism: associations with essentialist beliefs of race in six Asian cultural groups. Cross-Cultural Research, 50 (3). pp. 231-250. ISSN 1069-3971

Bernardo, A. B. I. and Salanga, M. G. C. and Tjipto, S. and Hutapea, B. and Yeung, S. S. and Khan, A. (2016) Contrasting lay theories of polyculturalism and multiculturalism: associations with essentialist beliefs of race in six asian cultural groups. Cross-Cultural Research, 50 (3). pp. 231-250. ISSN 1069-3971

Chuah, S. H. W. and Marimuthu, M. and Ramayah, T. (2016) The contribution of perceived firm marketing innovation initiatives to customer perceived value and loyalty: does switching experience really matter? Asian Academy of Management Journal, 21 . pp. 1-23. ISSN 1394-2603

Ling, Nai Ho and Abdul Wahab, Norhaliza and A. Shehu, Ibrahim and Alhassan, A. and Albool, I. and Ibnihajar, N. and Othman, B. M. and Zainal, M. S. and Ibrahim, M. J. and Rasol, M. S. (2016) Control of a coupled tank system using PI controller with advanced control methods. Jurnal Teknologi, 78 (42555). pp. 41-49. ISSN 0127-9696

Chowdhury, Md. Najmul Kabir and Ismail, Ahmad Fauzi and HossenBeg, Mohammad Dalour and Rahman Khan, Maksudur and Gohari, Rasoul Jamshidi and Saidin, Mohammad Abdul Razis and Islam, Muhammad Remanul and Ong, Huei Ruey (2016) Control of biodegradability in a natural fibre based nanocomposite as a function of impregnated copper nanoparticles. RSC Advances, 6 (34). pp. 28937-28946. ISSN 2046-2069

Miveh, Mohammad Reza and Rahmat, Mohd. Fadli and Ghadimi, Ali Asghar and Mustafa, Mohd. Wazir (2016) Control techniques for three-phase four-leg voltage source inverters in autonomous microgrids: a review. Renewable & Sustainable Energy Reviews, 54 . pp. 1592-1610. ISSN 1364-0321

Amiri Moghadam, Amir Ali and Torabi, Keivan and Kaynak, Akif and Zainal Alam, Muhd. Nazrul Hisham and Kouzani, Abbas and Mosadegh, Bobak (2016) Control-oriented modeling of a polymeric soft robot. Soft Robotics, 3 (2). pp. 82-97. ISSN 2169-5172

Abbas, Khaldoon N. and Bidin, Noriah and Sabry, Raad S. (2016) Controllable ZnO nanostructures evolution via synergistic pulsed laser ablation and hydrothermal methods. Ceramics International, 42 (12). pp. 13535-13546. ISSN 0272-8842

Lu, Alex Chia Yang and Ani, Farid Nasir (2016) Controlled microwave-induced pyrolysis of waste rubber tires. International Journal of Technology, 7 (2). pp. 314-322. ISSN 2086-9614

Lu, Alex Chia Yang and Ani, Farid Nasir (2016) Controlled microwave-induced pyrolysis of waste rubber tires. International Journal of Technology, 7 (2). pp. 314-322. ISSN 2086-9614

Soon, Chong Chee and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda and Md. Sam, Yahaya and Rahmat, Mohd. Fuaad (2016) Controller parameter optimization for an electro-hydraulic actuator system based on particle swarm optimization technique. Jurnal Teknologi, 78 (42534). pp. 101-108. ISSN 0127-9696

Yang, M. and Wu, J. and Bai, H. and Xie, T. and Zhao, Q. and Wong, T. W. (2016) Controlling three-dimensional ice template via two-dimensional surface wetting. AIChE Journal, 62 (12). pp. 4186-4192. ISSN 0001-1541

Yang, Miao and Wu, Jingjun and Bai, Hao and Tao, Xie and Zhao, Qian and Wong, Tuck Whye (2016) Controlling three-dimensional ice template via two-dimensional surface wetting. AICHE Journal, 62 (12). pp. 4186-4192. ISSN 15475905

Ahmad, Tahir and Abu Bakar, Sumarni and Baharun, Sabariah and Binjadhnan, Faisal A. M. (2016) Coordinated transformation for fuzzy autocatalytic set of fuzzy graph type-3. Journal of Mathematics and Statistics, 11 (4). pp. 119-127. ISSN 1549-3644

Banki, Mohammed Bala and Ismail, Hairul Nizam and Muhammad, Isa Bala (2016) Coping with seasonality: a case study of family owned micro tourism businesses in Obudu Mountain Resort in Nigeria. Tourism Management Perspectives, 18 . pp. 141-152. ISSN 2211-9736

Yunos, Muhammad Arif Azhar and Wan Ibrahim, Wan Aini and Abd. Wahib, Siti Munirah (2016) Copper(ii)ion determination in water samples using magnetite-calcium alginate sorbent and flame atomic absorption spectrometry analysis. Eproceeding Chemistry, 1 (1). pp. 58-62. ISSN 2550-1453

Bachiran, Bakhtiar Ridhwan and Wan Shamsuri, Wan Nurulhuda and Hashim, Muhamad Faiz and Ahmed, Rashid and Deraman, Karim and Hussin, Rosli (2016) Copper-doped tin sulphide thin film for solar cell material. Solid State Science and Technology, 24 (2). pp. 38-44. ISSN 0128-7389

Samavati, A. and Mustafa, M. K. and Ismail, A. F. and Othman, M. H. D. and Rahman, M. A. (2016) Copper-substituted cobalt ferrite nanoparticles: structural, optical and antibacterial properties. Materials Express, 6 (6). pp. 473-482. ISSN 2158-5849

Mirzaei, Maryam and Ramakrishnan, Suresh and Bekri, Mahmoud (2016) Corporate default prediction with industry effects: evidence from emerging markets. International Journal of Economics and Financial Issues, 6 (3). pp. 161-169. ISSN 2146-4138

Bello, K. B. and Jusoh, A. and Md. Nor, K. (2016) Corporate social responsibility and consumer rights awareness: a research age. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Ramakrishnan, Suresh and Hishan, Sanil S. and Kanjanapathy, Malini (2016) Corporate social responsibility in Malaysian apparel manufacturing industry: a study on corporate social responsibility website reporting. International Review of Management and Marketing, 6 (4). pp. 205-208. ISSN 2146-4405

Ramakrishnan, Suresh and Hishan, Sanil S. and Kanjanapathy, Malini (2016) Corporate social responsibility in Malaysian apparel manufacturing industry: a study on corporate social responsibility website reporting. International Review of Management and Marketing, 6 (4). pp. 205-208. ISSN 2146-4405

Mustapha, M. and Mustafa, M. W. and Khalid, S. N. and Abubakar, I. and Abdilahi, A. M. (2016) Correlation and wavelet-based short-term load forecasting using anfis. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Baharudin, N. H. and Kasa, A. and Chik, Z. and Taha, M. R. and Adnan, A. (2016) Correlation between peak ground acceleration and strength parameters of residual soil. International Journal of Applied Engineering Research, 11 (9). pp. 6757-6759. ISSN 0973-4562

Islam, Shumaila and Bidin, Noriah and Riaz, Saira and Naseem, S. and Mohd. Marsin, Faridah (2016) Correlation between structural and optical properties of surfactant assisted sol-gel based mesoporous SiO2-TiO2 hybrid nanoparticles for pH sensing/optochemical sensor. Sensors and Actuators B-Chemical, 225 . pp. 66-73. ISSN 0925-4005

Islam, S. and Bidin, N. and Riaz, S. and Naseem, S. and Marsin, F. M. (2016) Correlation between structural and optical properties of surfactant assisted sol-gel based mesoporous SiO2-TiO2 hybrid nanoparticles for pH sensing/optochemical sensor. Sensors and Actuators, B: Chemical, 225 . pp. 66-73. ISSN 0925-4005

TermehYousefi, Amin and Tanaka, Hirofumi and Bagheri, Samira and Rusop, Mohamad and Ikeda, Shoichiro (2016) Correlation of critical parameters on carbon nanotubes crystallinity in chemical vapor deposition by using renewable bioresource. Journal of Nanoscience and Nanotechnology, 16 (8). pp. 8263-8268. ISSN 1533-4880

Termehyousefi, A. and Tanaka, H. and Bagheri, S. and Mahmood, M. R. and Ikeda, S. (2016) Correlation of critical parameters on carbon nanotubes crystallinity in chemical vapor deposition by using renewable bioresource. Journal of Nanoscience and Nanotechnology, 16 (8). pp. 8263-8268. ISSN 1533-4880

Mohd. Rameli, Mohd. Rustam and Mohd. Kosnin, Azlina (2016) Correlational analysis on achievement goal orientation with mathematics anxiety of Malaysian schools students. Man in India, 96 (6). pp. 1683-1690. ISSN 0025-1569

Saud, Safaa and Hosseinian S., Raheleh and Bakhsheshi-Rad, Hamid Reza and Yaghoubi Doust, Fatemeh and Iqbal, Nida and Hamzah, Esah and Ooi, C. H. Raymond (2016) Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid. Materials Science and Engineering C, 68 . pp. 687-694. ISSN 0928-4931

Saud, S. N. and Raheleh Hosseinian, S. and Bakhsheshi-Rad, H. R. and Yaghoubidoust, F. and Iqbal, N. and Hamzah, E. and Ooi, C. H. R. (2016) Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid. Materials Science and Engineering C, 68 . pp. 687-694. ISSN 0928-4931

Ali Al Fakih, Abdo Mohammed and Aziz, Madzlan and Abdallah, Hassan and Maarof, Hasmerya and Jamaludin, Rosmahaida and Usman, Bishir (2016) Corrosion inhibition of inhibition of mild steel by two furan derivatives. Malaysian Journal of Analytical Sciences, 20 (3). pp. 484-490. ISSN 1394-2506

M. Al-Fakih, Abdo and Aziz, Madzlan (2016) Corrosion inhibition of Q235A steel in acid medium using isatin derivatives: a QSAR study. Malaysian Journal of Analytical Sciences, 20 (3). pp. 484-490. ISSN 1394-2506

Mohd. Ali, Muhammad Khairool Fahmy and Yahaya, Nordin and Abu Bakar, Akrima and Ismail, Mardhiah and Zardasti, Libriati and Md. Noor, Norhazilan (2016) Corrosion of x-70 carbon steel pipeline subject to sulfate reducing bacteria. ARPN Journal of Engineering and Applied Sciences, 11 (21). pp. 12643-12652. ISSN 1819-6608

Mohd. Ali, Muhammad Khairool Fahmy and Yahaya, Nordin and Abu Bakar, Akrima and Ismail, Mardhiah and Zardasti, Libriati and Md. Noor, Norhazilan (2016) Corrosion of x-70 carbon steel pipeline subject to sulfate reducing bacteria. ARPN Journal of Engineering and Applied Sciences, 11 (21). pp. 12643-12652. ISSN 1819-6608

Thangavelu, Saravana Kannan and Ahmed, Abu Saleh and Ani, Farid Nasir (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 40 (12). pp. 1704-1711. ISSN 0363-907X

Thangavelu, S. K. and Ahmed, A. S. and Ani, F. N. (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 40 (12). pp. 1704-1711. ISSN 0363-907X

Ghafouri, Mehdi and Khan, Tareef Hayat and Ahmad, Abdullah Sani (2016) Cost of construction: how globalization impacts on vernacular houses. ARPN Journal of Engineering and Applied Sciences, 11 (13). pp. 8085-8093. ISSN 1819-6608

Quoquab, Farzana and Pahlevan, Sara and Hussin, Nazimah (2016) Counterfeit product purchase: what counts—materialism or religiosity? Advanced Science Letters, 22 (5-6). pp. 1303-1306. ISSN 1936-6612

Quoquab, F. and Pahlevan, S. and Hussin, N. (2016) Counterfeit product purchase: what counts—materialism or religiosity? Advanced Science Letters, 22 (5-6). pp. 1303-1306. ISSN 1936-6612

Liew, Siau Chuin and Yeak, Su Hoe and Ismail, Munira (2016) Coupling of adaptive element free Galerkin method with variational multiscale method for two-dimensional sine-gordon equation. Indian Journal of Science and Technology, 9 (30). pp. 1-12. ISSN 0974-6846

Aliyu, Muhammad Sirajo and Abdullah, Abdul Hanan and Chizari, Hassan and Sabbah, Thabit and Altameem, Ayman (2016) Coverage enhancement algorithms for distributed mobile sensors deployment in wireless sensor networks. International Journal of Distributed Sensor Networks . pp. 1-9. ISSN 1550-1329

Kassim, Khairul Anuar and A. Rashid, Ahmad Safuan and Kueh, Ahmad Beng Hong and Yah, Chong Siaw and Siang, Lam Chee (2016) Criteria of acceptance for constant rate of strain consolidation test for tropical cohesive soil. Geotechnical and Geological Engineering, 34 (4). pp. 931-947. ISSN 0960-3182

Mousavi, Seyed Mohammad and Khan, Tareef Hayat and Lim, Yaik Wah (2016) A critical review of user fit-out in habitable rooms in high-rise residential apartments in Malaysia. Asian Social Science, 12 (2). pp. 184-194. ISSN 1911-2017

Mokhtari, M. and Abdul-Malek, Z. and Gharehpetian, G.B. (2016) A critical review on soil ionisation modelling for grounding electrodes. Archives of Electrical Engineering, 65 (3). pp. 449-461. ISSN 0004-0746

Jean, Wong Li and Jiar, Yeo Kee (2016) Critical thinking in young children. Man in India, 96 (1-2). pp. 579-587. ISSN 0025-1569

Md. Sarip, Mohd. Sharizan and Morad, Noor Azian and Yamashita, Yoshiyuki and Tsuji, Tomoya and Che Yunus, Mohd. Azizi and Abd. Aziz, Mustafa Kamal and Lam, Hon Loong (2016) Crude palm oil (CPO) extraction using hot compressed water (HCW). Separation and Purification Technology, 169 . pp. 103-112. ISSN 1383-5866

Farash, Mohammad Sabzinejad and Kumari, Saru and Bakhtiari, Majid (2016) Cryptanalysis and improvement of a robust smart card secured authentication scheme on SIP using elliptic curve cryptography. Multimedia Tools and Applications, 75 (8). pp. 4485-4504. ISSN 1380-7501

Siddiqui, Zeeshan and Abdullah, Hanan and Khan, Khurram and Alghamdi, Abdullah Sharaf (2016) Cryptanalysis and improvement of ‘a secure authentication scheme for telecare medical information system’ with nonce verification. Peer-To-Peer Networking and Applications, 9 (5). pp. 841-853. ISSN 1936-6442

Siddiqui, Z. and Abdullah, A. H. and Khan, M. K. and Alghamdi, A. S. (2016) Cryptanalysis and improvement of'a secure authentication scheme for telecare medical information system' with nonce verification. Peer-to-Peer Networking and Applications, 9 (5). pp. 841-853. ISSN 1936-6442

Chai, K. P. and Othman, N. F. B. and Teh, A. H. and Ho, K. L. and Chan, K. G. and Shamsir, M. S. and Goh, K. M. and Ng, C. L. (2016) Crystal structure of Anoxybacillus a-amylase provides insights into maltose binding of a new glycosyl hydrolase subclass. Scientific Reports, 6 . ISSN 2045-2322

Chai, Kian Piaw and Othman, Noor Farhan and Teh, Aik-Hong and Ho, Kok Lian and Chan, Kok-Gan and Shamsir, Mohd. Shahir and Goh, Kian Mau and Ng, Chyan Leong (2016) Crystal structure of Anoxybacillus α-amylase provides insights into maltose binding of a new glycosyl hydrolase subclass. Scientific Reports, 6 . pp. 1-10. ISSN 2045-2322

Kadir, F. K. and Shamsuddin, M. and Rosli, M. M. (2016) Crystal structure of bis(acetophenone 4-benzoylthiosemicarbazonato-κ2 N 1,S)nickel(II). Acta Crystallographica Section E: Crystallographic Communications, 72 . pp. 760-763. ISSN 2056-9890

Kadir, Faraidoon Karim and Shamsuddin, Mustaffa and Rosli, Mohd. Mustaqim (2016) Crystal structure of bis(acetophenone 4-benzoylthiosemicarbazonato-kappa N-2(1),S) nickel(II). Acta Crystallographica Section E-Crystallographic Communications, 72 . pp. 760-765. ISSN 2056-9890

Jaafar, Nardiah Rizwana and Littler, Dene and Beddoe, Travis and Rossjohn, Jamie and Md. Illias, Rosli and Mahadi, Nor Muhammad and Mackeen, Mukram Mohamed and Abdul Murad, Abdul Munir and Abu Bakar, Farah Diba (2016) Crystal structure of fuculose aldolase from the Antarctic psychrophilic yeast Glaciozyma antarctica PI12. Acta Crystallographica Section:F Structural Biology Communications, 72 (11). pp. 831-839. ISSN 2053-230X

Jaafar, N. R. and Littler, D. and Beddoe, T. and Rossjohn, J. and Md. Illias, R. and Mahadi, N. M. and Mackeen, M. M. and Murad, A. M. A. and Abu Bakar, F. D. (2016) Crystal structure of fuculose aldolase from the Antarctic psychrophilic yeast Glaciozyma antarctica PI12. Acta Crystallographica Section: F Structural Biology Communications, 72 (11). pp. 831-839. ISSN 2053-230X

Dabagh, Shadab and Ati, Ali A. and Ghoshal, S. K. and Zare, Samad and Rosnan, R. M. and Jbara, Ahmed S. and Othaman, Zulkafli (2016) Cu2+ and Al3+ co-substituted cobalt ferrite: structural analysis, morphology and magnetic properties. Bulletin of Materials Science, 39 (4). pp. 1029-1037. ISSN 0250-4707

Salimi, Esmaeil and Ghaee, Azadeh and Ismail, Ahmad Fauzi and Othman, Mohd. Hafiz Dzarfan and Sean, Goh Pei (2016) Current approaches in improving hemocompatibility of polymeric membranes for biomedical application. Macromolecular Materials and Engineering, 301 (7). pp. 771-800. ISSN 1438-7492

Ismaila, Aminu and Ahmad, Termizi Ramli and Md Kasmani, Rafiziana and Abubakar, S. Aliyu (2016) Current knowledge and research opportunities in nuclear fire safety: a technical overview on aircraft impact upon nuclear containment. Indian Journal Of Science And Technology, 9 (46). p. 107076. ISSN 09746846

Ghafourian, K. and Mohamed, Z. and Ismail, S. and Malakute, R. and Abolghasemi, M. (2016) Current status of the research on construction and demolition waste management. Indian Journal of Science and Technology, 9 (35). ISSN 0974-6846

Samori, Zakiah and Md. Salleh, Nor Zafir and Khalid, Mohammad Mahyuddin (2016) Current trends on halal tourism: cases on selected Asian countries. Tourism Management Perspectives, 19 . pp. 131-136. ISSN 2211-9736

Khosravi, Arash and Che Hussin, Ab. Razak (2016) Customer knowledge management: development stages and challenges. Journal of Theoretical and Applied Information Technology, 91 (2). pp. 264-274. ISSN 1992-8645

Asadi, Shahla and Nilashi, Mehrbakhsh and Che Husin, Abd. Razak and Yadegaridehkordi, Elaheh (2016) Customers perspectives on adoption of cloud computing in banking sector. Information Technology and Management . pp. 1-26. ISSN 1385-951X (In Press)

Faridmehr, Iman and Ahmad, Yusof and Md. Tahir, Mahmood and Osman, Mohd. Hanim (2016) Cyclic and explosive evaluation of new proposed steel joint. Advances in Civil Engineering, 2016 . pp. 1-11. ISSN 16878-086

Marto, Aminaton and Tan, Choy Soon and Makhtar, Ahmad Mahir and Jusoh, Siti Norafida (2016) Cyclic behaviour of Johor sand. International Journal of Geomate, 10 (3). pp. 1891-1898. ISSN 21862-982

Aminudin, Nurul Iman and Ahmad, Farediah and Taher, Muhammad and Mohamed Zulkifli, Razauden (2016) Cytotoxic and antibacterial activities of constituents from Calophyllum ferrugineum ridley. Records of Natural Products, 10 (5). pp. 649-653. ISSN 1307-6167

Aminudin, Nurul Iman and Ahmad, Farediah and Taher, Muhammad and Mohamed Zulkifli, Razauden (2016) Cytotoxic and antibacterial evaluation of coumarins and chromanone acid from Calophyllum symingtonianum. Journal of Applied Pharmaceutical Science, 6 (1). pp. 23-27. ISSN 2231-3354

Qazi, H. H. and Mohammad, A. B. and Ahmad, H. and Zulkifli, M. Z. (2016) D-shaped polarization maintaining fiber sensor for strain and temperature monitoring. Sensors (Switzerland), 16 (9). ISSN 1424-8220

Qazi, H. H. and Mohammad, A. B. and Ahmad, H. and Zulkifli, M. Z. (2016) D-shaped polarization maintaining fiber sensor for strain and temperature monitoring. Sensors (Switzerland), 16 (9). ISSN 1424-8220

Mohamed Othman, Filzah and Mohd. Zamil, Nor Aiza and Abdul Rasid, Siti Zaleha and Vakilbashi, Amin and Mokhber, Mozhdeh (2016) Data envelopment analysis: a tool of measuring efficiency in banking sector. International Journal of Economics and Financial Issues, 6 (3). pp. 911-916. ISSN 2146-4138

Othman, F. M. and Mohd. Zamil, N. A. and Rasid, S. Z. A. and Vakilbashi, A. and Mokhber, M. (2016) Data envelopment analysis: a tool of measuring efficiency in banking sector. International Journal of Economics and Financial Issues, 6 (3). pp. 911-916. ISSN 2146-4138

Raja Kumaran, Shamini and Othman, Mohd. Shahizan and Mi Yusuf, Lizawati (2016) Data mining approaches in business intelligence: postgraduate data analytic. Jurnal Teknologi, 78 (8-2). pp. 75-79. ISSN 0127-9696

Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Jomehzadeh, F. (2016) Data on the natural ventilation performance of windcatcher with anti-short-circuit device (ASCD). Data in Brief, 9 . pp. 252-256. ISSN 2352-3409

Mustapha, M. and Mustafa, M. W. and Khalid, S. N. (2016) Data selection and fuzzy-rules generation for short-term load forecasting using ANFIS. Telkomnika (Telecommunication Computing Electronics And Control), 14 (3). pp. 791-799. ISSN 1693-6930

Syah, Iqbal Faridian and Abdullah, Md. Pauzi and Syadli, Husna and Hassan, Mohammad Yusri and Hussin, Faridah (2016) Data selection test method for better prediction of building electricity consumption. Jurnal Teknologi, 78 (5-7). pp. 67-72. ISSN 0127-9696

Gani, Abdullah and Mohammadi, Kasra and Shamshirband, Shahaboddin and Khorasanizadeh, Hossein and Danesh, Amir Seyed and Piri, Jamshid and Ismail, Zuraini and Zamani, Mazdak (2016) Day of the year-based prediction of horizontal global solar radiation by a neural network auto-regressive model. Theoretical and Applied Climatology, 125 (3-4). pp. 679-689. ISSN 0177-798X

Lai, S. O. and Heng, S. L. and Chong, K. C. and Lau, W. J. (2016) Deacidification of palm oil using solvent extraction integrated with membrane technology. Jurnal Teknologi, 78 (12). pp. 69-74. ISSN 0127-9696

Sattar, Golam Shabbir and Keramat, Mumnunul and Shahid, Shamsuddin (2016) Deciphering transmissivity and hydraulic conductivity of the aquifer by vertical electrical sounding (VES) experiments in Northwest Bangladesh. Applied Water Science, 6 (1). pp. 35-45. ISSN 2190-5487

M. Mokhtar, Mutahharah and Taib, M. Rozainee and Hassim, Mimi H. (2016) Decision analysis of multi-pollutant control strategy for coal-fired power plant in Malaysia. Clean Technologies and Environmental Policy, 18 (5). pp. 1361-1367. ISSN 1618-954X

Mokhtar, M. M. and Taib, M. R. and Hassim, M. H. (2016) Decision analysis of multi-pollutant control strategy for coal-fired power plant in Malaysia. Clean Technologies and Environmental Policy, 18 (5). pp. 1361-1367. ISSN 1618-954X

Sidek, Akhmal and Hamzah, Umar and Samsudin, Abd. Rahim and Arifin, M. Hariri and Junin, Radzuan (2016) Deep crustal profile across NW Sabah basin: integrated potential field data and seismic reflection. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1401-1411. ISSN 1819-6608

Ramakrishnan, Suresh and Nabi, Agha Amad and Ahmad Anuar, Melati (2016) Default prediction in Pakistan using financial ratios and sector level variables. International Journal of Economics and Financial Issues, 6 (3). pp. 197-202. ISSN 2146-4138

Jalani, Desrino and Abd. Rahman, Shaharin Fadzli and Hashim, Abdul Manaf (2016) Defect-free mixed mono- and bi-layer graphene synthesized from refined palm oil by thermal chemical vapor deposition. Materials Letters, 182 . pp. 168-172. ISSN 0167-577X

Jalani, D. and Rahman, S. F. A. and Hashim, A. M. (2016) Defect-free mixed mono- and bi-layer graphene synthesized from refined palm oil by thermal chemical vapor deposition. Materials Letters, 182 . pp. 168-172. ISSN 0167-577X

Khattak, M. A. and Mukhtar, A. and Ghumman, Imran S. S. and Badshah, Saeed and Khan, Rafiullah and Kazi, S. (2016) Degradation assessment of nuclear power plant extraction steam piping after long term service. Jurnal Teknologi, 78 (9). pp. 143-148. ISSN 0127-9696

Sing, N. B. and Mostavan, A. and Hamzah, E. and Mantovani, D. and Hermawan, H. (2016) Degradation behavior of biodegradable Fe35Mn alloy stents. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 103 (3). pp. 572-577. ISSN 1552-4973

Affam, Augustine Chioma and Chaudhuri, Malay and M. Kutty, Shamsul Rahman and Muda, Khalida (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154. ISSN 1944-3994

Affam, A. C. and Chaudhuri, M. and Kutty, S. R. M. and Muda, K. (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154. ISSN 1944-3994

Lee, Mei Jiun and Ong, Chi Siang and Lau, Woei Jye and Ng, Be Cheer and Ismail, Ahmad Fauzi and Lai, Soon Onn (2016) Degradation of PVDF-based composite membrane and its impacts on membrane intrinsic and separation properties. Journal of Polymer Engineering, 36 (3). pp. 261-268. ISSN 0334-6447

Mohamad Maharum, S. M. and Fisal, N. and Lo, A. and Ghafar, A. S. A. and Saparudin, F. A. and Katiran, N. (2016) A demand-based spectrum orthogonalisation scheme for interference avoidance in LTE-Advanced heterogeneous networks. Transactions on Emerging Telecommunications Technologies, 27 (10). pp. 1308-1330. ISSN 2161-5748

Yusoff, Ahmad Mustaqim and Khan, Aqeel and Abdul Latif, Adibah and Marappan, Deviga (2016) Demographic characteristics, dyadic coping, and marital quality among university students in Malaysia. Man in India, 96 (1). pp. 49-55. ISSN 0025-1569

Yusoff, Ahmad Mustaqim and Khan, Aqeel and Abdul Latif, Adibah and Marappan, Deviga (2016) Demographic characteristics, dyadic coping, and marital quality among university students in Malaysia. Man in India, 96 (1-2). pp. 49-55. ISSN 00250-1569

Hainin, Mohd. Rosli and Oluwasola, Ebenezer and Brown, E. Ray (2016) Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness. Construction and Building Materials, 121 . pp. 265-277. ISSN 0950-0618

Goumri-Said, Souraya and Ahmed, Rashid and Kanoun, Mohammed Benali (2016) Density-functional theory study of high hydrogen content complex hydrides Mg(BH4)2 at low temperature. Renewable Energy, 90 . pp. 114-119. ISSN 0960-1481

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Asgarani, Masoud Kasiri and Jabbarzare, Saeid and Iqbal, N. and Abdul Kadir, Mohammed Rafiq (2016) Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications. Materials Science and Engineering C, 60 . pp. 526-537. ISSN 0928-4931

Bakhsheshi-Rad, H. R. and Hamzah, E. and Kasiri-Asgarani, M. and Jabbarzare, S. and Iqbal, N. and Abdul Kadir, M. R. (2016) Deposition of nanostructured fluorine-doped hydroxyapatite-polycaprolactone duplex coating to enhance the mechanical properties and corrosion resistance of Mg alloy for biomedical applications. Materials Science and Engineering C, 60 . pp. 526-537. ISSN 0928-4931

Hasim, Saipol Hadi and Mamat, Rosbi and Sheikh, Usman Ullah and Mohd. Amin, Shamsuddin (2016) Depth and thermal image fusion for human detection with occlusion handling under poor illumination from mobile robot. Studies in Computational Intelligence, 647 . pp. 365-380. ISSN 1860-949X

Hasim, Saipol Hadi and Mamat, Rosbi and Sheikh, Usman Ullah and Mohd. Amin, Shamsuddin (2016) Depth and thermal image fusion for human detection with occlusion handling under poor illumination from mobile robot. Studies in Computational Intelligence, 647 . pp. 365-380. ISSN 1860-949X

Mohd. Zin, Abdullah Asuhaimi and Naderipour, Amirreza and Habibuddin, Mohd. Hafiz and Khajehzadeh, Alimorad (2016) Design a new compensation control strategy for grid connected wt and mt inverters at the microgrid. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10575-10581. ISSN 1819-6608

Zin, A. A. M. and Naderipour, A. and Habibuddin, M. H. B. and Khajehzadeh, A. (2016) Design a new compensation control strategy for gridconnected WT and MT inverters at the microgrid. ARPN Journal of Engineering and Applied Sciences, 11 (17). pp. 10575-10581. ISSN 1819-6608

Rehman, Tariq and Mohd. Faudzi, Ahmad 'Athif and Dewi, Dyah Ekashanti Octorina and Suzumori, Koichi and Muhammad Razif, Muhammad Rusydi and Nordin, I. N. A. M. (2016) Design and analysis of bending motion in single and dual chamber bellows structured soft actuators. Jurnal Teknologi, 78 (42534). pp. 17-23. ISSN 0127-9696

AbuZaiter, Alaa and Hikmat, Omer Faris and Nafea, Marwan and Mohamed Ali, Mohamed Sultan (2016) Design and fabrication of a novel XY theta z monolithic micro-positioning stage driven by NiTi shape-memory-alloy actuators. Smart Materials and Structures, 25 (10). pp. 1-16. ISSN 0964-1726

AbuZaiter, A. and Hikmat, O. F. and Nafea, M. and Ali, M. S. M. (2016) Design and fabrication of a novel XYθz monolithic micro-positioning stage driven by NiTi shape-memory-alloy actuators. Smart Materials and Structures, 25 (10). ISSN 0964-1726

Shirakashi, Masataka and Chua, Chih Ping and Shaikh Salim, Sheikh Ahmad Zaki (2016) Design and fabrication of FIV apparatus for classroom lecture demonstration. Jurnal Teknologi, 78 (9). pp. 1-7. ISSN 0127-9696

Podari, N. and Muji, S. Z. M. and Hairol Jabbar, M. and Rahim, R. A. (2016) Design and modeling of linear back projection (lbp) algorithm for field programmable gate array (FPGA). ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14075-14077. ISSN 1819-6608

Abd. Rahman, N. H. A. and Ali, Mohd. Tarmizi and Islam, Mohammad Tariqul and Yamada, Yoshihide (2016) Design and performance improvement of shaped-beam parabolic reflector antenna for small region coverage by non-symmetrical array feed technique. International Journal of Applied Electromagnetics and Mechanics, 51 (3). pp. 307-318. ISSN 1383-5416

Abd. Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Design and performance improvement of shaped-beam parabolic reflector antenna for small region coverage by non-symmetrical array feed technique. International Journal of Applied Electromagnetics and Mechanics, 51 (3). pp. 307-318. ISSN 1383-5416

Islam, Shayla and Abdalla, Aisha Hassan and Habaebi, Mohamed Hadi and Hassan, Wan Haslina and Hasan, Mohammad Kamrul (2016) Design and simulation of a multihoming-based inter-system handoff scheme in NEMO. Elektronika Ir Elektrotechnika, 22 (1). pp. 92-96. ISSN 1392-1215

Patak, Andi Anto and Abu Naim, Hamimah and Ma'ruf, Amar and Abdul Ghafar, Mohd. Najib (2016) Design and validation of online learning environment questionnaire. International Journal on Advanced Science, Engineering and Information Technology, 6 (3). pp. 329-333. ISSN 2088-5334

Mamat, Aman Mohd. Ihsan and Martinez-Botas, Ricardo F. and Rajoo, Srithar and Hao, Liu and Romagnoli, Alessandro (2016) Design methodology of a low pressure turbine for waste heat recovery via electric turbocompounding. Applied Thermal Engineering, 107 . pp. 1166-1182. ISSN 1359-4311

Isnin, Siti Rohani and Awang Hamid, Dayang Tiawa and Sunar, Mohd. Shahrizal (2016) Design of 3D immesive learning environment to enhanced hand skill after stroke. Man in India, 96 (6). pp. 1727-1736. ISSN 0025-1569

Khan, Ahmad Ali and Jamaluddin, Mohd. Haizal and Nair, Jamal and Khan, Rizwan and Aqeel,, Sajid and Saleem, Jawad and Owais, Owais (2016) Design of a dual-band MIMO dielectric resonator antenna with pattern diversity for WiMAX and WLAN applications. Progress in Electromagnetics Research M, 50 . pp. 65-73. ISSN 1937-8726

Abdur Razzak, M. and Bhuiyan, W. T. and Natasha, N. I. and Muzahidul Islam, A. K. M. and Amin, M. K. M. (2016) Design of a grid-connected photovoltaic inverter with maximum power point tracking using perturb and observe technique. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1212-1220. ISSN 2088-8694

M., Abdur Razzak and Taskin Bhuiyan, Wahida and Nawrin Islam, Natasha and A. K. M., Muzahidul Islam and Mohammed Amin, Muhamad Kamal (2016) Design of a grid-connected photovoltaic inverter with maximum power point tracking using perturb and observe technique. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1212-1220. ISSN 2088-8694

Fateh, Amir and Hejazi, Farzad and Jaafar, Mohd. Saleh and Abd. Karim, Izian and Adnan, Azlan (2016) Design of a variable stiffness bracing system: mathematical modeling, fabrication, and dynamic analysis. Soil Dynamics and Earthquake Engineering, 80 . pp. 87-101. ISSN 0267-7261

Nasir, Jamal and Jamaluddin, Mohd. Haizal and Khalily, Mohsen and Kamarudin, Muhamad Ramlee and Ullah, Irfan (2016) Design of an MIMO dielectric resonator antenna for 4G applications. Wireless Personal Communications, 88 (3). pp. 525-536. ISSN 0929-6212

Abdul Yasser, Abd. Fatah and Mazlan, Saiful Amri and Koga, Tsuyoshi and Zamzuri, Hairi and Imaduddin, Fitrian (2016) Design of magnetorheological valve using serpentine flux path method. International Journal of Applied Electromagnetics and Mechanics, 50 (1). pp. 29-44. ISSN 1383-5416

Abd. Fatah, A. Y. and Mazlan, S. A. and Koga, T. and Zamzuri, H. and Imaduddin, F. (2016) Design of magnetorheological valve using serpentine flux path method. International Journal of Applied Electromagnetics and Mechanics, 50 (1). pp. 29-44. ISSN 1383-5416

Ardo, A. A. and Zainal, Anazida and Ghaleb, F. A. (2016) Design of misbehavior detection scheme by combining lane change and braking alerts. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Khalily, Mohsen and Tafazolli, Rahim and Abd. Rahman, Tharek and Kamarudin, Muhammad Ramlee (2016) Design of phased arrays of series-fed patch antennas with reduced number of the controllers for 28-GHzmm-wave applications. IEEE Antennas and Wireless Propagation Letters, 15 . pp. 1305-1308. ISSN 1536-1225

Nilda Tri Putri, Nilda Tri Putri and Retha, Frastia and Mohd. Yusof, Sha'ri (2016) Design of quality system documentation in hydrotiller production unit as improvement of quality management system in small and medium enterprise. International Journal of Productivity and Quality Management, 19 (1). pp. 116-138. ISSN 1746-6474

Mokhtar, R. and Abdul Rahman, A. and Othman, S. H. (2016) The design of the academic quality assurance management information system. Information (Japan), 19 (7B). pp. 2851-2856. ISSN 1343-4500

Jamei, Saeed and Abdul Malik, Adi Maimun and Mansor, Shuhaimi and Che Sidik, Nor Azwadi and Priyanto, Agoes (2016) Design parametric study of a compound wing-in-ground effect. I: aerodynamics performance. Journal of Aerospace Engineering, 29 (1). 04015022-04015022. ISSN 0893-1321

Jamei, Saeed and Hj Abdul Malik, Adi Maimun and Mansor, Shuhaimi and Che Sidik, Nor Azwadi and Priyanto, Agoes (2016) Design parametric study of a compound wing-in-ground effect. Ii: aerodynamics coefficients. Journal of Aerospace Engineering, 29 (1). pp. 1-14. ISSN 0893-1321

Al-Ashwal, Rania Hussien and Supriyanto, Eko and Andriantoro, Hananto (2016) Design standard in health care to follow or not? An insight from clinical pathway. Jurnal Teknologi, 78 (9). pp. 161-167. ISSN 0127-9696

Tan, Mei Jing and Haji Omar, Abdul Hafidz and Awang Hj Hamid, Dayang Hajah Tiawa and M, Syaifuddin Mohd and H, Lim (2016) Design, development and evaluation of 3d virtual environment based as psychological intervention tool for volleyball players. INTERNATIONAL JOURNAL OF HELATH, PHYSICAL EDUCATION AND COMPUTER SCIENCE IN SPORTS, 23 (1). pp. 144-152. ISSN 22313265

Mohd. Zin, Abdullah Asuhaimi and Naderipour, Amirreza and Habibuddin, M. H. and Khajehzadeh, A. and Moradi, M. (2016) Designed a new compensation current control method for three-phase grid-connected photovoltaic inverter. ARPN Journal of Engineering and Applied Sciences, 11 (13). pp. 8175-8180. ISSN 1819-6608

Sabri, S. F. and Yuhaniz, Siti Sophiayati and Kamardin, Kamilia (2016) Designing a low cost cubesat's command and data handling subsystem kit. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6259-6264. ISSN 1819-6608

Mohamad, Mazmira and Ahmed, Rashid and Kanoun, Ahmed Ali and Shaari, Amiruddin and Goumri-Said, Souraya (2016) Designing a molecular device for organic solar cell applications based on Vinazene: I-V characterization and efficiency predictions. Solar Energy, 140 . pp. 124-129. ISSN 0038-092X

Mohamad, M. and Ahmed, R. and Kanoun, A. A. and Shaari, A. and Goumri-Said, S. (2016) Designing a molecular device for organic solar cell applications based on Vinazene: I-V characterization and efficiency predictions. Solar Energy, 140 . pp. 124-129. ISSN 0038-092X

Hashim, Hasnatul Balqies and Bakri, Aryati and Zakaria, Nor Hawaniah (2016) Designing a pre-school courseware to learn basic al-quran using ngaji method. Journal of Information Systems Research and Innovation, 10 (3). pp. 20-26. ISSN 2289-1358

Chee, K. N. and Ibrahim, N. H. and Yahaya, N. and Hasan, M. N. and Surif, J. (2016) Designing mobile learning communication aid as an android app. Advanced Science Letters, 22 (12). pp. 4023-4027. ISSN 1936-6612

Hisan, F. N. A. N. and Othman, M. F. and Manaf, N. S. A. and Rahman, F. A. (2016) Detection of abnormalities based on gamma wave EEG signal for autism spectrum disorder. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 131-136. ISSN 2180-1843

Alkawaz, Mohammed Hazim and Sulong, Ghazali and Saba, Tanzila and Rehman, Amjad (2016) Detection of copy-move image forgery based on discrete cosine transform. Neural Computing and Applications . pp. 1-10. ISSN 0941-0643 (In Press)

Heydari, Atefeh and Tavakoli, Mohammadali and Salim, Naomie (2016) Detection of fake opinions using time series. Expert Systems with Applications, 58 . pp. 83-92. ISSN 0957-4174

Bahadoran, Mahdi and Ahmad Noorden, Ahmad Fakhrurrazi and Mohajer, Faeze Sadat and Abd. Mubin, Mohamad Helmi and Chaudhary, Kashif and Jalil, Muhammad Arif and Ali, Jalil and Yupapin, Preecha (2016) Detection of Salmonella bacterium in drinking water using microring resonator. Artificial Cells Nanomedicine and Biotechnology, 44 (1). pp. 315-321. ISSN 2169-1401

Rezaei, Sajad and Shahijan, Milad Kalantari and Amin, Muslim and Wan Ismail, Wan Khairuzzaman (2016) Determinants of app stores continuance behavior: a PLS path modelling approach. Journal of Internet Commerce, 15 (4). pp. 408-440. ISSN 1533-2861

Rezaei, S. and Shahijan, M. K. and Amin, M. and Ismail, W. K. W. (2016) Determinants of App stores continuance behavior: a PLS path modelling approach. Journal of Internet Commerce, 15 (4). pp. 408-440. ISSN 1533-2861

Low, Sheau Ting and Choong, Weng Wai and Mohammed, Abdulhakim (2016) Determinants of energy conservation intention: evidence from Malaysian universities. Environmental Engineering and Management Journal, 15 (1). pp. 231-243. ISSN 1582-9596

Ting, Low Sheau and Wai, Choong Weng and Mohammed, Abdulhakim (2016) Determinants of energy conservation intention: evidence from Malaysian universities. Environmental Engineering and Management Journal, 15 (1). pp. 231-243. ISSN 1582-9596

Subramaniam, Thirunaukarasu and Loganathan, Nanthakumar and Yerushalmi, Erez and Devadason, Evelyn Shyamala and Majid, Mazlan (2016) Determinants of infant mortality in older ASEAN economies. Social Indicators Research . pp. 1-19. ISSN 0303-8300 (In Press)

Madahi, Abdolrazagh and Sukati, Inda (2016) Determinants of the channel selection and choice intention: a marketing perspective. Journal for Global Business Advancement, 9 (4). pp. 357-389. ISSN 1746-966X

Madahi, Abdolrazagh and Sukati, Inda (2016) Determinants of the channel selection and choice intention: a marketing perspective. Journal for Global Business Advancement, 9 (4). pp. 357-389. ISSN 1746-966X

Kalu, J. U. and Buang, A. and Aliagha, G. U. (2016) Determinants of voluntary carbon disclosure in the corporate real estate sector of Malaysia. Journal of Environmental Management, 182 . pp. 519-524. ISSN 0301-4797

Tahir, M. and Anuar, M. B. A. (2016) The determinants of working capital management and firms performance of textile sector in Pakistan. Quality and Quantity, 50 (2). pp. 605-618. ISSN 0033-5177

Mohamad Ishak, Nurul Ain and Khalid, Puspa Inayat and Mahmood, Nasrul Humaimi and Harun, Mokhtar (2016) Determination of epoch length and regression model for 15-second segment of SEMG signal used in joint analysis of electromyography spectrum and amplitude. Jurnal Teknologi, 78 (42556). pp. 7-13. ISSN 0127-9696

Mohamed, Azman and A.Khalid, Nur Hafizah and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Jaya, Ramadhansyah Putra and Mohd. Sam, Abdul Rahman and Ismail, Che Ros (2016) Determination of groove and mechanical properties of underside shaped concrete paver. Jurnal Teknologi, 78 (4). pp. 79-83. ISSN 0127-9696

Bidin, Noriah and Hossenian, Raheleh and Duralim, Maisarah and Krishnan, Ganesan and Mohd. Marsin, Faridah and Nughro, Waskito and Zainal, Jasman (2016) Determination of hydrocarbon levels in water via laser-induced acoustics wave. Optics and Lasers in Engineering, 79 . pp. 61-67. ISSN 0143-8166

Abdullah, Ezzat Chan and Kow, Kien Woh and Yusoff, Rozita and Abdul Raman, Abdul Aziz (2016) Determination of kinetic parameters for thermal decomposition of bamboo leaf to extract bio-silica. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (21). pp. 3249-3254. ISSN 1556-7036

Ahmed Nasroulla, Nazaneen and A. Rashid, Ahmad Safuan and Kalatehjari, Roohollah and Kassim, Khairul Anuar and Md. Noor, Norhazilan and Horpibulsuk, Suksun (2016) Determination of liquid limit of a low swelling clay using different cone angles. Applied Clay Science, 132 . pp. 748-752. ISSN 0169-1317

Nojumuddin, Nur Syereena and Yusof, Fadhilah and Yusop, Zulkifli (2016) Determination of minimum inter-event time for storm characterisation in Johor, Malaysia. Journal of Flood Risk Management . ISSN 1753-318X (In Press)

Qamar, Shaista and Aslam, Muhammad and Javed, Muhammad Arshad (2016) Determination of proximate chemical composition and detection of inorganic nutrients in maize (Zea mays L.). Materials Today: Proceedings, 3 (2). pp. 715-718. ISSN 2214-7853

Thang, Lee Yien and See, Hong Heng and Quirino, Joselito P. (2016) Determination of tamoxifen and its metabolites using micelle to solvent stacking in nonaqueous capillary electrophoresis. Electrophoresis, 37 (9). pp. 1166-1169. ISSN 0173-0835

Abed, Salam Ahmed and Mohd. Sirat, Hasnah (2016) Determination of the absolute configuration of new piperidin-4-one derivative from pellacalyx saccardianus by NOESY spectroscopy. Jurnal Teknologi, 78 (42431). pp. 15-18. ISSN 0127-9696

Duralim, Maisarah and Bidin, Noriah and Nugroho, Waskito and Zainal, Jasman (2016) Determination sound speed of metal in aqueous solution via laser induced acoustic wave technique. Jurnal Teknologi, 78 (3). pp. 301-304. ISSN 0127-9696

Bahri, Nur Ayuni Shamsul and Azli, Naziha Ahmad and Abu Samah, Narina (2016) Determining the elements of problem solving strategies in project-based laboratory (PB Lab) course. International Journal of Engineering Education, 32 (1). pp. 409-423. ISSN 0949-149X

Mehrbakhsh, Nilashi and Ahmadi, Hossein and Ahani, Ali and Ravangard, Ramin (2016) Determining the importance of hospital information system adoption factors using fuzzy analytic network process (ANP). Technological Forecasting and Social Change, 111 . pp. 244-264.

Shahijan, Milad Kalantari and Rezaei, Sajad and Preece, Christopher Nigel (2016) Developing a framework of internationalization for higher education institutions in Malaysia: a SWOT analysis. International Journal of Management in Education, 10 (2). pp. 145-173. ISSN 1750-385X

Shahdan, Intan Azura and Regenstein, Joe and Mohammad Shahabuddin, Abu Saim and Rahman, Mohammad Tariqur (2016) Developing control points for halal slaughtering of poultry. Poultry Science, 95 (7). pp. 1680-1692. ISSN 0032-5791

Shahdan, I. A. and Regenstein, J. M. and Shahabuddin, A. S. M. and Rahman, M. T. (2016) Developing control points for halal slaughtering of poultry. Poultry Science, 95 (7). pp. 1680-1692. ISSN 0032-5791

Jamil, R. and Salam, Z. A. and Zakaria, Z. and Hussin, N. and Quoquab, F. and Mahadi, N. (2016) Developing future talent: Impact of case learning experience on knowledge acquisition. Advanced Science Letters, 22 (12). pp. 4497-4500. ISSN 1936-6612

Amran, Ahmad Zulkhairie and Abdul Latiff, Zulkarnain and Nasution, Henry and Mohd. Perang, Mohd. Rozi and Mohd. Jamil, Hishammudin and Misseri, Mohd. Nazri (2016) Development and evaluation of an automotive air-conditioning test rig. Jurnal Teknologi, 78 (10-2). pp. 55-60. ISSN 0127-9696

Reddy A., Vijaya Bhaskar and Yusop, Zulkifli and Jaafar, Jafariah and Aris, Azmi and A. Majid, Zaiton and Umar, Khalid and Talib, Juhaizah (2016) Development and validation of a selective, sensitive and stability indicating UPLC-MS/MS method for rapid, simultaneous determination of six process related impurities in darunavir drug substance. Journal of Pharmaceutical and Biomedical Analysis, 128 . pp. 141-148. ISSN 0731-7085

Shamsudin, Mohd. Z. and Daud, Mohd. Y. and Mustafa, Mohd. J. A. and Arshad, Mohd. A. and Jathin, Romizan and Mahad, Mohd. S. D. (2016) Development and validation of work movement task analysis: part 2. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6574-6583. ISSN 1819-6608

Aparow, Vimal Rau and Hudha, Khisbullah and Megat Ahmad, Megat Mohamad Hamdan and Jamaluddin, Hishamuddin (2016) Development and verification of a 9-DOF armored vehicle model in the lateral and longitudinal directions. Jurnal Teknologi, 78 (6). pp. 117-137. ISSN 0127-9696

Taufiq, Imam and Hassan, Zainudin (2016) Development model of social exegesis in Indonesia: exegesis teaching studies in central java. Man in India, 96 (6). pp. 1733-1747. ISSN 0025-1569

Nabgan, Walid and Mat, Ramli and Tuan Abdullah, Tuan Amran and Nabgan, Bahador and Gambo, Yahya and Zakaria, Zaki Yamani (2016) Development of a kinetic model for hydrogen production from phenol over Ni-Co/ZrO2 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4444-4452. ISSN 2213-3437

Nabgan, W. and Mat, R. and Abdullah, T. A. T. and Nabgan, B. and Gambo, Y. and Zakaria, Z. Y. (2016) Development of a kinetic model for hydrogen production from phenol over Ni-Co/ZrO2 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4444-4452. ISSN 2213-3437

Ichwan, Burhanuddin and Mazlan, Saiful Amri and Imaduddin, Fitrian and Ubaidillah, Ubaidillah and Koga, Tsuyoshi and Idris, Mohd. Hasbullah (2016) Development of a modular MR valve using meandering flow path structure. Smart Materials and Structures, 25 (3). pp. 1-14. ISSN 0964-1726

Ichwan, B. and Mazlan, S. A. and Imaduddin, F. and Ubaidillah, Ubaidillah and Koga, T. and Idris, M. H. (2016) Development of a modular MR valve using meandering flow path structure. Smart Materials and Structures, 25 (3). ISSN 0964-1726

Faradonbeh, R. S. and Jahed Armaghani, D. and Monjezi, M. (2016) Development of a new model for predicting flyrock distance in quarry blasting: a genetic programming technique. Bulletin of Engineering Geology and the Environment, 75 (3). pp. 993-1006. ISSN 1435-9529

T. Narayanan, Aqilah Leela and Ayob, Mohammad Afif and Yahaya, Nordin and A. Harris, Arief Ruhullah and Supriyanto, Eko (2016) Development of a novel device for monitoring incentive spirometry performance. Sains Malaysiana, 45 (7). pp. 1121-1129. ISSN 0126-6039

AbuZaiter, Alaa and Nafea, Marwan and Mohamed Ali, Mohamed Sultan Sultan (2016) Development of a shape-memory-alloy micromanipulator based on integrated bimorph microactuators. Mechatronics, 38 . pp. 16-28. ISSN 0957-4158

Al-Ashwal, Rania Hussein and Che Aziz, Noor Afatin and Nooh, Syed Mohd. (2016) Development of a smart IUD launcher for prevention of uterine perforation. Biomedical Engineering-Biomedizinische Technik, 61 (5). pp. 551-556. ISSN 0013-5585

Fouladinejad, N. and Fouladinejad, N. and Abdul Jalil, M. K. and Mohd. Taib, J. (2016) Development of a surrogate-based vehicle dynamic model to reduce computational delays in a driving simulator. Simulation, 92 (12). pp. 1087-1102. ISSN 0037-5497

Abdul Jalil, Mohamad Kasim and Mohd. Taib, Jamaludin and Nima, Fouladi Nejad and Fouladinejad, Nariman (2016) Development of a surrogate-based vehicle dynamic model to reduce computational delays in a driving simulator. Simulation: Transaction of The Society for Modelling and Simulation International, 92 (12). pp. 1087-1102. ISSN 0037-5497

Kibria, Mahmud Arman and Rahman, Saidur and Al-Sulaiman, Fahad A. and A. Aziz, Md. Maniruzzaman (2016) Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings. Solar Energy, 124 . pp. 114-123. ISSN 0038-092X

Al-Sanjary, Omar Ismael and Ahmed, Ahmed Abdullah and Sulong, Ghazali (2016) Development of a video tampering dataset for forensic investigation. Forensic Science International, 266 . pp. 565-572. ISSN 0379-0738

Mohammed Nadzri, Nur Izzati and Sidek, Khairul Azami and Wicaksono, Dedy H. B. (2016) Development of an electrocardiogram based biometric identification system: a case study in the university. Journal of Telecommunication, Electronic and Computer Engineering, 8 (4). pp. 115-120. ISSN 2180-1843

Wan Mokhtar, Wan Nur Aini Wan and Wan Abu Bakar, Wan Azelee Wan Abu and Ali, Rusmidah and Abdul Kadir, Abdul Aziz Abdul (2016) Development of bimetallic and trimetallic oxides doped on molybdenum oxide based material on oxidative desulfurization of diesel. Arabian Journal of Chemistry . ISSN 1878-5352 (In Press)

Sari, Ajeng Arum and Tachibana, Sanro and Muryanto, Muryanto and Hadibarata, Tony (2016) Development of bioreactor systems for decolorization of reactive green 19 using white rot fungus. Desalination and Water Treatment, 57 (15). pp. 7029-7039. ISSN 1944-3994

Sari, A. A. and Tachibana, S. and Muryanto, Muryanto and Hadibarata, T. (2016) Development of bioreactor systems for decolorization of Reactive Green 19 using white rot fungus. Desalination and Water Treatment, 57 (15). pp. 7029-7039. ISSN 1944-3994

Johari, Khairiraihanna and Saman, Norasikin and Song, Shiow Tien and Cheu, Siew Chin and Kong, Helen and Mat, Hanapi (2016) Development of coconut pith chars towards high elemental mercury adsorption performance - effect of pyrolysis temperatures. Chemosphere, 156 . pp. 56-68. ISSN 0045-6535

Hafezolghorani Esfahani, M. and Hejazi, F. and Vaghei, R. and Nikbakht, E. and Tze, D. C. J. (2016) Development of constitutive model for precast prestressed concrete segmental columns. Modelling and Simulation in Engineering, 2016 . ISSN 1687-5591

Preece, Christopher Nigel and Mat Isa, Che Maznah and Mohd. Saman, Hamidah and Che Ibrahim, Che Khairil (2016) Development of entry location, entry timing and entry mode decision model for construction firms in international markets. Construction Management and Economics, 34 (4-5). pp. 236-257. ISSN 0144-6193

Preece, C. N. and Mat Isa, C. M. and Saman, H. M. and Che Ibrahim, C. K. (2016) Development of entry location, entry timing and entry mode decision model for construction firms in international markets. Construction Management and Economics, 34 (4-5). pp. 236-257. ISSN 0144-6193

Sidi Ahmad, Muhamad Fakaruddin and Bidin, Noriah (2016) Development of long pulsed ND:yag laser system. Jurnal Teknologi, 78 (3). pp. 311-314. ISSN 0127-9696

Gupta, Arun Kumar and Kumar, M. and Singh, Om Prakash and Balakrishnan, Malarvili (2016) Development of low cost and robust nursing calling device for hospitalized patients. International Journal of Applied Engineering Research, 11 (22). pp. 11060-11064. ISSN 0973-4562

Husain, Abdul Rashid and Hadad, Yaser and Zainal Alam, Muhd. Nazrul Hisham (2016) Development of low-cost microcontroller-based interface for data acquisition and control of microbioreactor operation. Journal of Laboratory Automation, 21 (5). pp. 660-670. ISSN 2211-0682

Nodeh, Hamid Rashidi and Wan Ibrahim, Wan Aini and Ali, Imran and Mohd. Marsin, Sanagi (2016) Development of magnetic graphene oxide adsorbent for the removal and preconcentration of As(III) and As(V) species from environmental water samples. Environmental Science and Pollution Research, 23 (10). pp. 9759-9773. ISSN 0944-1344

Nazir, Ramli and Moayedi, Hossein and Mohd. Noor, Rozaimi and Ghareh, Soheil (2016) Development of new attenuation equation for subduction mechanisms in Malaysia water. Arabian Journal of Geosciences, 9 (20). pp. 1-6. ISSN 1866-7511

Fosi, Mohamoud Kofal and Mustafa, Azeman and Ismail, Ahmad Fauzi (2016) Development of novel surface modified poly (vinylidene fluoride ‐ co ‐ hexafluoropropylene) (PVDF ‐ HFP) membrane contactor for CO2 absorption. Journal of Scientific Research and Development, 3 (3). pp. 75-81. ISSN 1115-7569

Mohd. Faizal, Hasan and M. Nazri, M. Shafiq and Rahman, Md. Mizanur and Syahrullail, S. and Abdul Latiff, Zulkarnain (2016) Development of palm biomass briquettes with polyethylene plastic waste addition. Jurnal Teknologi, 78 (9-2). pp. 69-75. ISSN 0127-9696

Shirakashi, Masataka and Yeo, Kye Wei and Koide, Mizuyasu and Takahashi, Tsutomu and Shaikh Salim, Sheikh Ahmad Zaki (2016) Development of robust velocimeter for natural water flow monitoring. Jurnal Teknologi, 78 (7). pp. 107-112. ISSN 0127-9696

Sarbini, N. N. and Ibrahim, I. S and Saim, A. Aziz and Ab. Kadir, Mariyana Aida and Syed Mohsin, S. M. (2016) Development of shear stress equation contributed by steel fibre in reinforced concrete. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5445-5451. ISSN 1819-6608

Bunawan, Aliff Ridzuan and Mahin, Mohd. Azrul Hisham and Hezmi, Muhammad Azril and Kassim, Azman and A. Rashid, Ahmad Safuan (2016) Development of slope monitoring device using accelerometer. Jurnal Teknologi, 78 (8-5). pp. 59-65. ISSN 0127-9696

Bunawan, Aliff Ridzuan and Mahin, Mohd. Azrul Hisham and Hezmi, Muhammad Azril and Kassim, Azman and A. Rashid, Ahmad Safuan (2016) Development of slope monitoring device using accelerometer. Jurnal Teknologi, 78 (8-5). pp. 59-65. ISSN 0127-9696

Wan Azelee, Ihsan and Goh, P. S. and Lau, W. J. and Ng, B. C. and Ismail, Ahmad Fauzi (2016) Development of thin film nanocomposite embedded with graphene oxide for MgSo4 removal. Journal of Engineering Science and Technology, 11 (7). pp. 974-986. ISSN 1823-4690

Wan Azelee, I. B. and Goh, P. S. and Lau, W. J. and Ng, B. C. and Ismail, A. F. (2016) Development of thin film nanocomposite embedded with graphene oxide for MgSo4 removal. Journal of Engineering Science and Technology, 11 (7). pp. 974-986. ISSN 1823-4690

Zavadskas, Edmundas Kazimieras and Mardani, Abbas and Turskis, Zenonas and Jusoh, Ahmad and Md. Nor, Khalil (2016) Development of TOPSIS method to solve complicated decision-making problems: an overview on developments from 2000 to 2015. International Journal of Information Technology & Decision Making, 15 (3). pp. 645-682. ISSN 0219-6220

Rasheed, Nadia and Mohd. Amin, Shamsudin (2016) Developmental and evolutionary lexicon acquisition in cognitive agents/robots with grounding principle: a short review. Computational Intelligence and Neuroscience . pp. 1-8. ISSN 1687-5265

Bharti, Rashmi and Dey, Goutam and Ojha, Probir kumar and Rajput, Shashi and Jaganathan, Saravana Kumar and Sen, Ramkrishna and Mandal, Mahitosh (2016) Diacerein-mediated inhibition of IL-6/IL-6R signaling induces apoptotic effects on breast cancer. Oncogene, 35 (30). pp. 3965-3975. ISSN 0950-9232

Ali, F. and Hussain, K. and Omar, R. (2016) Diagnosing customers experience, emotions and satisfaction in Malaysian resort hotels. European Journal of Tourism Research, 12 . pp. 25-40. ISSN 1994-7658

Ali, Faizan and Hussain, Kashif and Omar, Rosmini (2016) Diagnosing customers experience, emotions and satisfaction in Malaysian resort hotels. European Journal of Tourism Research, 12 . pp. 25-40. ISSN 1314-0817

Sasmoko, Sasmoko and Trilaksono, Tedd and Indrianti, Yasinta and Ahmad, Roslee (2016) Diagnostic evaluation of lecturer quality in learning process at “new private higher education institutions” in Tangerang, Indonesia. Advanced Science Letters, 22 (5-6). pp. 1662-1665. ISSN 1936-6612

Haider, Zuhaib and Chaudhary, Kashif and Roslan, Sufi and Ali, Jalil and Munajat, Yusof (2016) Diagnostics of laser induced graphite plasma under various pressures of air, helium and argon. Jurnal Teknologi, 78 (3). pp. 321-326. ISSN 0127-9696

Sasmoko, Sasmoko and Trilaksono, Teddy and Indria, Yasinta and Ahmad, Roslee (2016) Diagnotics evaluation of lecturer quality in learning process at “New Private Higher Education Institutions” in Tangerang, Indonesia. Advanced Science Letter, 22 . pp. 1662-1665. ISSN 1936-6612

Md. Nasir, Ahmad Nabil and Udin, Amirmudin and Ali, Dayana Farzeeha and Ahmad, Adnan and Nordin, Mohd. Safarin (2016) Differences between the non-technical skills for skilled workers towards highest educational level in the electronics industry in Klang Valley, Malaysia. Man in India, 96 (1). pp. 649-655. ISSN 0025-1569

Md. Nasir, Ahmad Nabil and Udin, Amirmudin and Ali, Dayana Farzeeha and Ahmad, Adnan and Nordin, Mohd. Safarin (2016) Differences between the non-technical skills for skilled workers towards highest educational level in the electronics industry in Klang Valley, Malaysia. Man in India, 96 (1-2). pp. 649-655. ISSN 0025-1569

Halah, Abdulelah Mohammed and Abdul Majid, Norazman and Abdullah, Tina (2016) The differencial effect of attentional condition on subsequent vocabulary development. English Language Teaching, 9 (1). pp. 88-100. ISSN 1916-4750

Nakisa, M. and Behrouzi, F. and Mobasher Amini, A. (2016) Different failure modes assessment to improve the sandwich composite panel stiffness with honeycomb core for marine structures application. Jurnal Teknologi, 78 (11). pp. 183-189. ISSN 0127-9696

Abedinpourshotorban, H. and Hasan, S. and Shamsuddin, S. M. and AsSahra, N. F. (2016) A differential-based harmony search algorithm for the optimization of continuous problems. Expert Systems with Applications, 62 . pp. 317-332. ISSN 0957-4174

Ahmed, Riaz and Mohamad, Noor Azmi (2016) Differentiating between leadership competencies and styles: a critical review in project management perspective. International Journal of Information Technology Project Management, 7 (1). pp. 58-71. ISSN 1938-0232

Ahmad Fadzillah, Nurrulhidayah and Abdul Rohman, Abdul Rohman and Rosman, Arieff Salleh and Mohd. Yusof, Farahwahida and Ismail, Amin and Mustaffa, Shuhaimi and Minhat, Ade Erawan and Khatib, Alfi (2016) Differentiation of fatty acid composition of butter adulterated with lard using gas chromatography mass spectrometry combined with principal componenet analysis. Jurnal Teknologi, 78 (2). pp. 171-177. ISSN 0127-9696

Nor Aziz, Ainul Mardhiyah and Ismail, Fadillah (2016) Diffusion innovation in telecommunication industry through customer participation in develop service quality. Information (Japan), 19 (10). pp. 4689-4694. ISSN 1343-4500

Mustafa, S. F. Z. and Maarof, H. and Ahmed, R. and Abdallah, H. H. (2016) Diffusional behavior and guest conformational analysis of hexadecane-1,16-diol and hexadecane in urea crystal model via molecular dynamics simulation approach. Journal of Molecular Modeling, 22 (12). ISSN 1610-2940

Rad, Abdolvahab Ehsani and Mohd. Rahim, Mohd. Shafry and Rehman, Amjad and Saba, Tanzila (2016) Digital dental x-ray database for caries screening. 3D Research, 7 (2). pp. 1-5. ISSN 2092-6731

Jiar, Y. K. and Yin, T. K. and Jaffri, H. (2016) Dimensionality and factor structure for the scale of teachers attitude toward inclusion. Man in India, 96 (1-2). pp. 357-366. ISSN 0025-1569

Jiar, Yeo Kee and Yin, Teng Kie and Jaffri, Hadijah (2016) Dimensionality and factor structure for the scale of teachers' attitude toward inclusion. Man in India, 96 (1). pp. 357-366. ISSN 0025-1569

Marwah, Omar Mohd. Faizan and Sharif, Safian and Ibrahim, Mustaffa and Mohamad, Elmy Johana and Idris, Mohd. Hasbullah (2016) Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (5). pp. 949-958. ISSN 1464-4207

Zakaria, Z. and Nabi, M. H. (2016) Direct tax, indirect tax and economic activities in developing countries: empirical evidence based on Malaysia data. Advanced Science Letters, 22 (5-6). pp. 1384-1387. ISSN 1936-6612

Sandhu, Fargham and Selamat, Hazlina and Mahalleh, Vahid Behtaji Siahkal (2016) Direct yaw control of vehicle using state dependent riccati equation with integral terms. Advances in Electrical and Computer Engineering, 16 (2). pp. 101-110. ISSN 1582-7445

Mat Zaib, Nurul Afiqah and Bazin, Nor Erne Nazira and Mustaffa, Noorfa Haszlinna (2016) Discount pricing strategies for smart phone using system dynamics modelling. Jurnal Teknologi, 78 (12-2). pp. 1-10. ISSN 0127-9696

Man, N. C. and Timmerman, H. (2016) A discrete choice model for firm location decision. Planning Malaysia, 4 (Specia). pp. 273-284. ISSN 1675-6215

Ghosh, S. and Mishra, P. and Mohamad, S. N. H. and de Santos, R. M. and Iglesias, B. D. and Elorza, P. B. (2016) Discrimination of peanuts from bulk cereals and nuts by near infrared reflectance spectroscopy. Biosystems Engineering, 151 . pp. 178-186. ISSN 1537-5110

Borghei, S. M. and Nekooie, M. A. and Sadeghian, H. and Ghazizadeh, M. R. J. and Parvaneh, A. and Yang, J. and Javaheri, A. and Kabiri-Samani, A. (2016) Discussion: triangular labyrinth side weirs with one and two cycles. Proceedings of the Institution of Civil Engineers: Water Management, 169 (3). pp. 111-114. ISSN 1741-7589

Dadashzadeh, Mohammad and Ahmad, Arshad and Khan, Faisal (2016) Dispersion modelling and analysis of hydrogen fuel gas released in an enclosed area: A CFD-based approach. Fuel, 184 . pp. 192-201. ISSN 0016-2361

Ahmad, Hilal and Abdul Jalil, Aishah and Triwahyono, Sugeng (2016) Dispersive solid phase extraction of gold with magnetite-graphene oxide prior to its determination: via microwave plasma-atomic emission spectrometry. RSC Advances, 6 (91). pp. 88110-88116. ISSN 2046-2069

Mohd. Danuri, Mohd. Suhaimi and Mohd. Ishan, Zahira and Mustaffa, Nur Emma and Abd. Karim, Saipol Bari and Mohamed, Othman and Hanid, Mahanim (2016) Dispute avoidance procedure: formulating a workable legal system in the Malaysian construction industry. Journal of Design and Built Environment, 16 (1). pp. 37-46. ISSN 1823-4208

Mohd. Danuri, Mohd. Suhaimi and Mohd. Ishan, Zahira and Mustaffa, Nur Emma and Abdul Karim, Saipol Bari and Mohamed, Othman and Hanid, Mahanim (2016) Dispute avoidance procedure:formulating a workable legal system in the Malaysian construction industry. Journal of Design and Built Environment, 16 (1). pp. 37-46. ISSN 2232-1500

Md. Yusof, Zulkifli and Ibrahim, Zuwairie and Ibrahim, Ismail and Mohd. Azmi, Kamil Zakwan and Ab. Aziz, Nor Azlina and Abd. Aziz, Nor Hidayati and Tan Ah Chik @ Mohamad, Mohd. Saberi (2016) Distance evaluated simulated Kalman filter for combinatorial optimization problems. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4911-4916. ISSN 1819-6608

Tsutsumi, Takashi and Kukino, Seita and Abdullah, Rini Asnida and Mohd. Amin, Mohd. For (2016) Distribution of maximum principal stress under distributed load from loading plate in specimen for Brazilian test. Jurnal Teknologi, 78 (8-6). pp. 81-86. ISSN 0127-9696

Hario, P. Fakhriy and Susanto, Adhi and Mustika, I. Wayan and Idrus, Sevia Mahdaliza and Hadi, Sholeh (2016) Dithering analysis in an orthogonal frequency division multiplexing-radio over fiber link. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1112-1121. ISSN 2088-8708

Thirunavakarasu, Tharshanadhevasheri and Ahmad, Umi Kalthom and Hussein, Omar Khan and Rahmat, Zaidah (2016) DNA analysis of saliva traces on cigarette butts exposed to indoor and outdoor environmental conditions. Malaysian Journal of Forensic Sciences, 7 (1). pp. 10-16. ISSN 2180-1126

Saeed, Sohail and Abdul Rasid, Siti Zaleha and Basiruddin, Rohaida (2016) Do board size and independence really matter? An empirical study. Research Journal of Finance and Accounting, 7 (13). pp. 20-27. ISSN 2222-1697

Karimiyan, A. and Alifiah, M. N. and Ziaei, S. M. and Nasserinia, A. (2016) Do commercial banks of Malaysia use loan loss provision to signal their earnings, return and cash flow? International Business Management, 10 (17). pp. 3899-3905. ISSN 1993-5250

Teck, Ling Gabriel Hoh and Siong, Ho Chin and Mohd., Ali Hishamuddin and Fan, Tu (2016) Do institutions matter in neighbourhood commons governance? A two-stage relationship between diverse property-rights structure and residential public open space (POS) quality: Kota Kinabalu and Penampang, Sabah, Malaysia. International Journal of the Commons, 10 (1). pp. 294-333. ISSN 1875-0281

Md. Husin, Maizaitulaidawati and Ab. Rahman, Asmak (2016) Do Muslims intend to participate in Islamic insurance?: analysis from theory of planned behaviour. Journal of Islamic Accounting and Business Research, 7 (1). pp. 42-58. ISSN 1759-0817

Yusuf, Mohammed and Ali Khan, Moonis and Abdullah, Ezzat Chan and Elfghi, M. and Hosomi, Masaaki and Terada, Akihiko and Riya, Shohei and Ahmad, Areeba (2016) Dodecyl sulfate chain anchored mesoporous graphene: synthesis and application to sequester heavy metal ions from aqueous phase. Chemical Engineering Journal, 304 . pp. 431-439. ISSN 1385-8947

Sami, Abdul and Jusoh, Ahmad and Qureshi, Muhammad Imran (2016) Does ethical leadership create public value? Empirical evidences from banking sector of Pakistan. International Review of Management and Marketing, 6 (4). pp. 262-270. ISSN 2146-4405

Ali, F. and Zhou, Y. and Hussain, K. and Nair, P. K. and Ragavan, N. A. (2016) Does higher education service quality effect student satisfaction, image and loyalty?: a study of international students in Malaysian public universities. Quality Assurance in Education, 24 (1). pp. 70-94. ISSN 0968-4883

Al-mulali, Usama and Solarin, Sakiru Adebola and Low, Sheau-Ting and Ozturk, Ilhan (2016) Does moving towards renewable energy causes water and land inefficiency? an empirical investigation. Energy Policy, 93 . pp. 303-314.

Scholtz, B. and Mahmud, I. and Mahmud, I. and Ramayah, T. (2016) Does usability matter? An analysis of the impact of usability on technology acceptance in ERP settings. Interdisciplinary Journal of Information, Knowledge, and Management, 11 . pp. 309-330. ISSN 1555-1229

Ahmad, H. and Tiu, Z. C. and Zarei, A. and Suthaskumar, M. and Salim, M. A. M. and Harun, S. W. (2016) Domain-wall dark pulse generation in fiber laser incorporating MoS2. Applied Physics B: Lasers and Optics, 122 (4). ISSN 0946-2171

Ul Haq, Bakhtiar and Ahmed, Rashid and Abdellatif, Galila and Shaari, Amiruddin and Butt, Faheem K. and Kanoun, Mohammed Benali and Goumri-Said, Souraya (2016) Dominant ferromagnetic coupling over antiferromagnetic in Ni doped ZnO: first-principles calculations. Frontiers of Physics, 11 (1). pp. 1-7. ISSN 2095-0462

Vafaei, Mohammadreza and Alih, Sophia C. and Abdul Rahman, Qotrunnada (2016) Drift demands of low-ductile moment resistance frames (MRF) under far field earthquake excitations. Jurnal Teknologi, 78 (6). pp. 82-92. ISSN 0127-9696

Vafaei, M. and Alih, S. C. and Abdul Rahman, Q. (2016) Drift demands of low-ductile moment resistance frames (MRF) under far field earthquake excitations. Jurnal Teknologi, 78 (6). pp. 82-92. ISSN 0127-9696

Yusof, A. F. and Miskon, S. and Iahad, N. A. and Rahman, A. A. and Abdullah, N. S. and Sim, A. T. H. and Ahmad, N. (2016) Drivers influencing shared services adoption. Journal of Theoretical and Applied Information Technology, 90 (1). pp. 93-100. ISSN 1992-8645

Shafaghat, Arezou and Keyvanfar, Ali and Muslim, Nurul Hidayah (2016) Drivers' adaptive travel behaviors towards green transportation development: a critical review. Archives of Transport, 38 (2). pp. 49-70. ISSN 0866-9546

Savita, K. S. and Dominic, P. D. D. and Ramayah, T. (2016) The drivers, practices and outcomes of green supply chain management: Insights from ISO14001 manufacturing firms in Malaysia. International Journal of Information Systems and Supply Chain Management, 9 (2). pp. 35-60. ISSN 1936-6612

Miswan, Z. and Lukman, S. K. and Abd Majid, F. A. and Loke, M. F. and Saidin, S. and Hermawan, H. (2016) Drug-eluting coating of ginsenoside Rg1 and Re incorporated poly(lactic-co-glycolic acid) on stainless steel 316L: physicochemical and drug release analyses. International Journal of Pharmaceutics, 515 (1-2). pp. 460-466. ISSN 0378-5173

Ahmadi, Atefeh and Mustaffa, Mohamed Sharif and Udin, Amirmudin and Haghdoost, Aliakbar (2016) DSM-IV-defined anxiety disorder symptoms in a middle-childhood-aged group of Malaysian children using the Spence children’s anxiety scale [Sintomas de transtorno de ansiedade definidos conforme o DSM-IV em um grupo de crianças Malaias na terceira infância segundo a escala de ansiedade infantil de spence]. Trends in Psychiatry and Psychotherapy, 38 (1). pp. 326-336. ISSN 2237-6089

Ali, Murtaza S.M. and Abd. Rahim, Sharul Kamal and Sabran, Mursyidul Idzam and Abedian, Mohammad and Eteng, Akaa Agbaeze and Islam, Mohammad Tariqul (2016) Dual band miniaturized microstrip slot antenna for WLAN applications. Microwave and Optical Technology Letters, 58 (6). pp. 1358-1362. ISSN 0895-2477

Selvaraju, R. and Kamarudin, M. R. and Khalily, M. and Nasir, J. and Jamaluddin, M. H. (2016) Dual band rectangular dielectric resonator antenna for WLAN application. Jurnal Teknologi, 78 (6-2). pp. 65-69. ISSN 0127-9696

Zaib, Aurang and Bhattacharyya, Krishnendu and Uddin, Md. Sharif and Shafie, Sharidan (2016) Dual solutions of Non-Newtonian Casson fluid flow and heat transfer over an exponentially permeable shrinking sheet with viscous dissipation. Modelling and Simulation in Engineering, 2016 . pp. 1-8. ISSN 1687-5591

Altaee, A. and Ismail, A. F. and Sharif, A. and Zaragoza, G. (2016) Dual stage PRO process: impact of the membrane materials of the process performance. Desalination and Water Treatment, 57 (14). pp. 6172-6183. ISSN 1944-3994

Ayop, Osman and A. Rahim, Mohamad Kamal and Murad, Noor Asniza and Samsuri, Noor Asmawati (2016) Dual-resonant polarization-independent and wide-angle metamaterial absorber in X-band frequency. Applied Physics a Materials Science & Processing, 122 (4). pp. 1-7. ISSN 0947-8396

Zuikafly, S. N. F. and Ahmad, F. and Ibrahim, M. H. and Latiff, A. A. and Harun, S. W. (2016) Dual-wavelength passively Q-switched erbium-doped fiber laser with MWCNTs slurry as a saturable absorber. Photonics Letters of Poland, 8 (4). pp. 98-100. ISSN 2080-2242

Zuikafly, S. N. F. and Ahmad, F. and Ibrahim, M. H. and Latiff, A. A. and Harun, S. W. (2016) Dual-wavelength passively Q-switched erbium-doped fiber laser with MWCNTs slurry as a saturable absorber. Photonics Letters of Poland, 8 (4). pp. 98-100. ISSN 2080-2242

Zuikafly, Siti Nur Fatin and Anas, Abdul Latiff and Sulaiman, Wadi Harun and Ibrahim, Mohd. Haniff and Ahmad, Fauzan (2016) Dual-wavelength passively Q-switched erbium-doped fiber laser with MWCNTs slurry as a saturable absorber. Photonics Letters of Poland, 8 (4). pp. 98-100. ISSN 2080-2242

Hasannuddin, A. K. and Wira, J. Y. and S. Sarah, S. Sarah and Ithnin, Ahmad Muhsin and Aizam, S. A. and Watanabe, S. and Hirofumi, N. and Azrin, M. A. (2016) Durability studies of single cylinder diesel engine running on emulsion fuel. Energy, 94 . pp. 557-568. ISSN 0360-5442

Zahari, Siti Norazila and Mohd. Sani, Mohd. Shahrir and Abu Husain, Nurulakmar and Ishak, Mahadzir and Zaman, Izzuddin (2016) Dynamic analysis of friction stir welding joints in dissimilar material plate structure. Jurnal Teknologi, 78 (42530). pp. 57-65. ISSN 0127-9696

Md. Saad, Amir Putra and Noor Jasmawati, Noor Jasmawati and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Nur, Hadi and Hermawan, Hendra and Syahrom, Ardiyansyah (2016) Dynamic degradation of porous magnesium under a simulated environment of human cancellous bone. Corrosion Science, 112 . pp. 495-506. ISSN 0010-938X

Abdul-Kadir, N. A. and Mat Safri, N. and Othman, M. A. (2016) Dynamic ECG features for atrial fibrillation recognition. Computer Methods and Programs in Biomedicine, 136 . pp. 143-150. ISSN 0169-2607

Haseeb, K. and Bakar, K. A. and Abdullah, A. H. and Ahmed, A. and Darwish, T. and Ullah, F. (2016) A dynamic energy-aware fault tolerant routing protocol for wireless sensor networks. Computers and Electrical Engineering, 56 . pp. 557-575. ISSN 0045-7906

Li, Xin and Yahya, Mohd. Yazid and Nia, Amin Bassiri and Wang, Zhihua and Lu, Guoxing (2016) Dynamic failure of fibre-metal laminates under impact loading - experimental observations. Journal of Reinforced Plastics and Composites, 35 (4). pp. 305-319. ISSN 0731-6844

Lim, Yaik Wah and Heng, C. Y. S. (2016) Dynamic internal light shelf for tropical daylighting in high-rise office buildings. Building and Environment, 106 . pp. 155-166. ISSN 0360-1323

Qureshi, M. I. and Awan, U. and Arshad, Z. and Rasli, A. M. and Zaman, K. and Khan, F. (2016) Dynamic linkages among energy consumption, air pollution, greenhouse gas emissions and agricultural production in Pakistan: sustainable agriculture key to policy success. Natural Hazards, 84 (1). pp. 367-381. ISSN 0921-030X

Yusuf, Z. and Wahab, N. A. and Sahlan, S. (2016) Dynamic modelling and control of membrane filtration process. International Journal of Nanotechnology, 13 (10-12). pp. 748-763. ISSN 1475-7435

Rozman, Ahmad Tajjudin and Mohamed Razali, Muhammad Najib and Azmi, Nurul Afiqah and Mohd. Ali, Hishamuddin (2016) The dynamic of linkages of Islamic REITs in mixed- asset portfolios in Malaysia. Pacific Rim Property Research Journal, 22 . pp. 245-265. ISSN 1444-5921

Rozman, Ahmad Tajjudin and Razali, Muhammad Najib and Azmi, Nurul Afiqah and Mohd. Ali, Hishamuddin (2016) The dynamic of linkages of Islamic REITs in mixed-asset portfolios in Malaysia. Pacific Rim Property Research Journal, 22 (3). pp. 245-265. ISSN 1444-5921

Tahir, M. and Tahir, B. (2016) Dynamic photocatalytic reduction of CO2 to CO in a honeycomb monolith reactor loaded with Cu and N doped TiO2 nanocatalysts. Applied Surface Science, 377 . pp. 244-252. ISSN 0169-4332

Uttraphan, C. and Shaikh-Husin, N. and Khalil-Hani, M. (2016) Dynamic power dissipation formulation for application in dynamic programming buffer insertion algorithm. Jurnal Teknologi, 78 (11). pp. 149-154. ISSN 0127-9696

Fereidouni, Hassan Gholipour and Al-Mulali, Usama and Lee, Janice Y. M. and Mohammed, Abdul Hakim (2016) Dynamic relationship between house prices in Malaysia's major economic regions and Singapore house prices. Regional Studies, 50 (4). pp. 657-670. ISSN 0034-3404

Fereidouni, Hassan Gholipour and Al-Mulali, Usama and Lee, Janice Y. M. and Mohammed, Abdul Hakim (2016) Dynamic relationship between house prices in Malaysias major economic regions and Singapore house prices. Regional Studies, 50 (4). pp. 657-670. ISSN 0034-3404

Pitchay Muthu Chelliah, P. and Thurasamy, R. and Alzahrani, A. I. and Alfarraj, O. and Alalwan, N. (2016) E-Government service delivery by a local government agency: the case of E-Licensing. Telematics and Informatics, 33 (4). pp. 925-935. ISSN 0736-5853

Ibrahim, O. A. and Zakaria, N. H. (2016) E-government services in developing countries: a success adoption model from employees perspective. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 383-396. ISSN 1992-8645

Zolfagharifar, S. Y. and Deljoo, C. (2016) Earthquake risk analysis and review of the geology of the Dam Site area of Dasht Palang. IIOAB Journal, 7 . pp. 206-213. ISSN 0976-3104

Ishak, Siti Aktar and Hashim, Haslenda and Ting, Tan Sie (2016) Eco innovation strategies for promoting cleaner cement manufacturing. Journal of Cleaner Production, 136 . pp. 133-149. ISSN 0959-6526

Ishak, S. A. and Hashim, H. and Ting, T. S. (2016) Eco innovation strategies for promoting cleaner cement manufacturing. Journal of Cleaner Production, 136 . pp. 133-149. ISSN 0959-6526

Zin, A. A. B. M. and Moradi, M. and Khairuddin, A. B. (2016) An economic analysis of time-based Demand Response programs and facts devices implementation for congestion management. ARPN Journal of Engineering and Applied Sciences, 11 (19). pp. 11343-11355. ISSN 1819-6608

Van Fan, Y. and Lee, C. T. and Klemes, J. J. and Bong, C. P. C. and Ho, W. S. (2016) Economic assessment system towards sustainable composting quality in the developing countries. Clean Technologies and Environmental Policy, 18 (8). pp. 2479-2491. ISSN 1618-954X

Faghirinejadfard, Amir and Mahdiyar, Amir and Marsono, Abdul Kadir and Mohandes, Saeed Reza and Omrany, Hossein and Tabatabaee, Sanaz and Md. Tap, Masine (2016) Economic comparison of industrialized building system and conventional construction system using building information modeling. Jurnal Teknologi, 78 (1). pp. 195-207. ISSN 0127-9696

Ulum, Mokhamad Fakhrul and Maylina, Leni and Noviana, Deni and Wicaksono, Dedy Hermawan Bagus (2016) EDTA-treated cotton-thread microfluidic device used for one-step whole blood plasma separation and assay. Lab an a Chip, 16 (8). pp. 1492-1504. ISSN 1473-0197

Sapawe, N. and Samion, S. and Zulhanafi, P. and Nor Azwadi, C. S. and Hanafi, M. F. (2016) Effect of addition of tertiary-butyl hydroquinone into palm oil to reduce wear and friction using four-ball tribotester. Tribology Transactions, 59 (5). pp. 883-888. ISSN 1040-2004

Hastuti, Kurnia and Hamzah, Esah and Hashim, Jasmi (2016) Effect of annealing on the microstructures and deformation behaviour of Ti-50.7at.%Ni shape memory alloy. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 230 (2). pp. 436-445. ISSN 1464-4207

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Ngadi, Norzita and Al Bakri Abdullah, Mohd. Mustafa (2016) Effect of antioxidant characteristic from waste cooking oil in modified asphalt binder. Key Engineering Materials, 700 . pp. 197-206. ISSN 1013-9826

Abdul Majid, Zulkifli and Mohsin, Rahmat and Nasri, Noor Shawal (2016) Effect of bioethanol on engine performance and exhaust emissions of a diesel fuel engine. International Journal of Technology, 7 (6). pp. 972-980. ISSN 2086-9614

Hassan, A. W. and Mohd. Yusof, Noordin and Sudin, Izman and Zakiah, K. (2016) Effect of carburizing process in enhancing nickel interlayer adhesion to WC-6% Co-substrate and promoting diamond nucleation and growth. Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications, 230 (2). pp. 620-626. ISSN 1464-4207

Hosseini, Soraya and Abdul Rashid, Suraya and Abbasi, Ali and Eghbali Babadi, Farahnaz and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2016) Effect of catalyst and substrate on growth characteristics of carbon nanofiber onto honeycomb monolith. Journal of the Taiwan Institute of Chemical Engineers, 59 . pp. 440-449. ISSN 1876-1070

Toemen, S. and Abu Bakar, W. A. W. and Ali, R. (2016) Effect of ceria and strontia over Ru/Mn/Al2O3 catalyst: catalytic methanation, physicochemical and mechanistic studies. Journal of CO2 Utilization, 13 . pp. 38-49. ISSN 2212-9820

Ur Rehman, Shahid and Idrus, Sevia Mahdaliza and Radzi, Raja Zahillah and Salleh, Mohd. Shahrill and Butt, Rizwan Aslam (2016) Effect of channel spacing on the signal quality for a bi-directional TWDM PON. Jurnal Teknologi, 78 (3). pp. 281-286. ISSN 0127-9696

Saidu, A. and Wagiran, Husin and Saeed, Mohammad Alam and Alajerami, Yasser Saleh Mustafa and Abdul Kadir, Ahmad Bazlie (2016) Effect of co-doping of sodium on the thermoluminescence dosimetry properties of copper-doped zinc lithium borate glass system. Applied Radiation and Isotopes, 118 . pp. 375-381. ISSN 0969-8043

Haidary, S. M. and Mohammed, A. B. and Córcoles, E. P. and Ali, N. K. and Ahmad, M. R. (2016) Effect of coatings and surface modification on porous silicon nanoparticles for delivery of the anticancer drug tamoxifen. Microelectronic Engineering, 161 . pp. 1-6. ISSN 0167-9317

Ganesan, Poo Balan and Islam, Md. Tariqul and Sahu, Jaya Narayan and Sandaran, Shanti C. (2016) Effect of column angles to rise velocity of a single bubble: a CFD study. Progress in Computational Fluid Dynamics, 16 (5). pp. 288-299. ISSN 1468-4349

Muhamedin, Fatin Liyana and M. Piah, M. Afendi and Othman, Nordiana Azlin and Algeelani, Nasir Ahmed (2016) Effect of contaminant flow-rate and applied voltage on the current density and electric field of polymer tracking test. International Journal of Electrical and Computer Engineering, 6 (2). pp. 819-826. ISSN 2088-8708

Kamaruddin, Mohd Johari and Mohamad, Nurulsurusiah and Asli, Umi Aisah and Ahmad Zaini, Muhammad Abbas and Kidam, Kamarizan and Hassim, Mimi Haryani (2016) The effect of conventional and microwave heating techniques on transesterification of waste cooking oil to biodiesel. Jurnal Teknologi, 78:8?? (2016). pp. 95-100. ISSN 2180-3722

Valaei, Naser and Rezaei, Sajad and Wan Ismail, Wan Khairuzzaman and Yoke, Moi Oh (2016) The effect of culture on attitude towards online advertising and online brands: applying hofstede's cultural factors to internet marketing. International Journal Of Internet Marketing And Advertising, 10 (4). pp. 270-301. ISSN 1477-5212

Valaei, N. and Rezaei, S. and Ismail, W. K. W. and Oh, Y. M. (2016) The effect of culture on attitude towards online advertising and online brands: applying Hofstedes cultural factors to internet marketing. International Journal of Internet Marketing and Advertising, 10 (4). pp. 270-301. ISSN 1477-5212

Saliza Azlina, O. and Kamarul Ariffin, C. M. and Ibrahim, M. H. and Kurniawan, D. (2016) Effect of cutting speed on bio-corrosion of AISI 316L stainless steel. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11178-11182. ISSN 1819-6608

Hamid, Izwan and Muhamad Said, Mohd. Farid and Mohamed Soid, Shahril Nizam and Nasution, Henry (2016) Effect of cylinder deactivation strategies on engine performances using one-dimensional simulation technique. Jurnal Teknologi, 78 (8-4). pp. 49-55. ISSN 0127-9696

Mhareb, Mohammad and Hashim, Suhairul and Ghoshal, Sibkrishna and Alajerami, Yasser and Bqoor, M. J. and Hamdan, A. I. and Saleh, Muneer Aziz and Abdul Karim, Muhammad Khalis (2016) Effect of Dy2O3 impurities on the physical, optical and thermoluminescence properties of lithium borate glass. Journal of Luminescence, 177 . pp. 366-372. ISSN 0022-2313

Mohd. Aris, Maizatul Asnie and Chelliapan, Shreeshivadasan and Mohd., Mohd. Fadhil and Anwar, Aznah Nor and Shahperi, Rafidah and Selvam, Sivathass Bannir (2016) Effect of effluent circulation and hydraulic retention time (HRT) on the performance of a modified anaerobic baffled reactor (MABR) during start-up period. Desalination and Water Treatment, 57 (40). pp. 18597-18605. ISSN 1944-3994

Shirdar, Mostafa Rezazadeh and Izman, Sudin and Taheri, Mohammad Mahdi and Assadian, Mahtab and Abdul Kadir, Mohammed Rafiq (2016) Effect of electrophoretic deposition parameters on the corrosion behavior of hydroxyapatite-coated cobalt-chromium using response surface methodology. Arabian Journal for Science And Engineering, 41 (2). pp. 591-598. ISSN 1319-8025

Shirdar, Mostafa Rezazadeh and Izman, Sudin and Taheri, Mohammad Mahdi and Assadian, Mahtab and Abdul Kadir, Mohammed Rafiq (2016) Effect of electrophoretic deposition parameters on the corrosion behavior of hydroxyapatite-coated cobalt–chromium using response surface methodology. Arabian Journal for Science and Engineering, 41 (2). pp. 591-598. ISSN 1319-8025

Shukor, Muhamad Syakir and Sulaiman, Zuraidah and Chin, Thoo Ai and Zakuan, Norhayati (2016) The effect of emotional versus rational appeal in advertising on Malaysian consumers purchase intention of hybrid car. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14106-14111. ISSN 1819-6608

Piroozian, A. and Hemmati, M. and Ismail, I. and Manan, M. A. and Bayat, A. E. and Mohsin, R. (2016) Effect of emulsified water on the wax appearance temperature of water-in-waxy-crude-oil emulsions. Thermochimica Acta, 637 . pp. 132-142. ISSN 0040-6031

Hasannuddin, A. K. and Yahya, Wira Jazair and Srithar, Rajoo and S. Sarah, S. Sarah and Ithnin, Ahmad Muhsin and Aizam, S. A. and Aiman, M. A. and Zahari, Muhammad Azahar Zikri and Watanabe, S. and Azrin, M. A and Mohd., S. S. (2016) Effect of emulsion fuel on engine emissions-A review. Clean Technologies and Environmental Policy, 18 (1). pp. 17-32. ISSN 1618-954X

Thahe, Asad A. and Bidin, Noriah and Al-Azawi, Mohammed A. and Ahmed, Naser M. (2016) Effect of etching time on optical and morphological features of N-type porous silicon prepared by photo-electrochemical method. Jurnal Teknologi, 78 (3). pp. 57-60. ISSN 0127-9696

Idumah, Christopher Igwe and Hassan, Azman (2016) Effect of exfoliated graphite nanoplatelets on thermal and heat deflection properties of kenaf polypropylene hybrid nanocomposites. Journal of Polymer Engineering, 36 (9). pp. 877-889. ISSN 0334-6447

Hubadillah, Siti Khadijah and Othman, Mohd. Hafiz Dzarfan and Harun, Zawati and Ismail, Ahmad Fauzi and Iwamoto, Yuji and Honda, Sawao and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd. Sokri, Mohd. Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42 (14). pp. 15547-15558. ISSN 0272-8842

Mohamad, Edy Tonnizam and Murlidhar, Bhatawdekar Ramesh and Armaghani, Danial Jahed and Saad, Rosli and Yi, Chang Shiang (2016) Effect of geological structure and blasting practice in fly rock accident at Johor, Malaysia. Jurnal Teknologi, 78 (8-6). pp. 15-21. ISSN 0127-9696

Moideen K, I. and Isloor, A. M. and Garudachari, B. and Ismail, A. F. (2016) The effect of glycine betaine additive on the PPSU/PSF ultrafiltration membrane performance. Desalination and Water Treatment, 57 (52). pp. 24788-24798. ISSN 1944-3994

Amir, H. M. S. and Nurun, N. and Iqbal, N. and Nur, F. R. and Lee, L. H. and Mariam, F. M. N. and Sharifudin, M. S. and Wan Rashidah, W. A. K. and A. A. Mukred, J. and Razauden, Z. and Mona, Z. (2016) Effect of heat treatment on the antioxidant activities of two cultivars of sweet potatoes. Jurnal Teknologi, 78 (6-12). pp. 111-115. ISSN 0127-9696

Mat Jan, Nur Amanina Mat and Sahar, Md. Rahim (2016) Effect of heat treatment on the structural modification of neodymium doped tellurite glass. Chalcogenide Letters, 13 (9). pp. 417-426. ISSN 1584-8663

Kelana, B. W. Y. and Mansor, N. N. A. and Sanny, L. (2016) The effect of HR sustainability practice to employee productivity in SMEs Malaysia. Information (Japan), 19 (7B). pp. 2815-2819. ISSN 1343-4500

Arjmandi, Reza and Hassan, Azman and Mohamad Haafiz, Mohamad Kassim and Zakaria, Zainoha and Islam, Md. Saiful (2016) Effect of hydrolysed cellulose nanowhiskers on properties of montmorillonite/polylactic acid nanocomposites. International Journal of Biological Macromolecules, 82 . pp. 998-1010. ISSN 0141-8130

Bargshady, Ghazal and Zahraee, Seyed Mojib and Ahmadi, Mohammad and Parto, Ali (2016) The effect of information technology on the agility of the supply chain in the Iranian power plant industry. Journal of Manufacturing Technology Management, 27 (3). pp. 427-442. ISSN 1741-038X

Emami, Sina Davazdah and Kasmani, Rafiziana Md. and Hamid, Mahar Diana and Cha Hassan, Che Rosmani and Sulaiman, Siti Zubaidah (2016) Effect of inhibitor gases on hydrogen flame propagation in a confined tee pipe (Part I). Fuel, 165 . pp. 50-58. ISSN 0016-2361

Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Gani, Paran (2016) Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique. Journal of Asian Ceramic Societies, 4 (2). pp. 164-177. ISSN 2187-0764

Hussin, Muhamad Khairul Anuar and Hamdan, Abdul Rahim (2016) Effect of knowledge, readiness and teaching technique in inclusive practices among mainstream teachers in Malaysia. International Journal of Early Childhood Special Education, 8 (1). pp. 1-15. ISSN 1308-5581

Badruzzaman, A. and Bidin, N. and Mohd. Bohari, S. P. (2016) The effect of laser irradiation on the viability of human breast cancer cell, MDA-MB-231. Jurnal Teknologi, 78 (3). pp. 315-320. ISSN 0127-9696

Latifi, Nima and A. Rashid, Ahmad Safuan and Marto, Aminaton and Md. Tahir, Mahmood (2016) Effect of magnesium chloride solution on the physico-chemical characteristics of tropical peat. Environmental Earth Sciences, 75 (3). pp. 1-9. ISSN 1866-6280

Amin, M. and Thurasamy, R. and Aldakhil, A. M. and Kaswuri, A. H. B. (2016) The effect of market orientation as a mediating variable in the relationship between entrepreneurial orientation and SMEs performance. Nankai Business Review International, 7 (1). pp. 39-59. ISSN 2040-8749

Huseien, Ghasan Fahim and Mirza, Jahangir and Ismail, Mohammad and Ghoshal, Sib Krishna and Ariffin, Mohd. Azreen Mohd. (2016) Effect of metakaolin replaced granulated blast furnace slag on fresh and early strength properties of geopolymer mortar. Ain Shams Engineering Journal . ISSN 2090-4479 (In Press)

Khalajabadi, Shahrouz Zamani and Abdul Kadir, Mohammed Rafiq and Izman, Sudin and Marvibaigi, Mohsen (2016) The effect of MgO on the biodegradation, physical properties and biocompatibility of a Mg/HA/MgO nanocomposite manufactured by powder metallurgy method. Journal of Alloys and Compounds, 655 . pp. 266-280. ISSN 0925-8388

Ali, Mohamed Abbas and Mesran, Hadi and Abd. Latip, R. and Othman, Nor Hidayu and Nik Mahmood, Nik Azmi (2016) Effect of microwave heating with different exposure times on the degradation of corn oil. International Food Research Journal, 23 (2). pp. 842-848. ISSN 1985-4668

Chong, Cheng Tung and Lam, Su Shiung and Hochgreb, Simone (2016) Effect of mixture flow stratification on premixed flame structure and emissions under counter-rotating swirl burner configuration. Applied Thermal Engineering, 105 . pp. 905-912. ISSN 1359-4311

Mohd. Yusof, Noordin and Razavykia, Abbas and Farahany, Saeed and Esmaeilzadeh, Alireza (2016) Effect of modifier elements on machinability of AL-20%Mg2Si metal matrix composite during dry turning. Machining Science and Technology, 20 (3). pp. 460-474. ISSN 1091-0344

Yusof, N. M. and Razavykia, A. and Farahany, S. and Esmaeilzadeh, A. (2016) Effect of modifier elements on machinability of Al-20Mg2Si metal matrix composite during dry turning. Machining Science and Technology, 20 (3). pp. 460-474. ISSN 1091-0344

Hainin, Mohd. Rosli and Oluwasola, Ebenezer Akin and A. Aziz, Md. Maniruzzaman and Yeroc, Suleiman Arafat (2016) Effect of moisture damage on gap-graded asphalt mixture incorporating electric arc furnace steel slag and copper mine tailings. Jurnal Teknologi, 78 (42554). pp. 1-9. ISSN 0127-9696

Majeed, K. and Hassan, A. and Bakar, A. A. and Jawaid, M. (2016) Effect of montmorillonite (MMT) content on the mechanical, oxygen barrier, and thermal properties of rice husk/MMT hybrid filler-filled low-density polyethylene nanocomposite blown films. Journal of Thermoplastic Composite Materials, 29 (7). pp. 1003-1019. ISSN 0892-7057

Ahmed, Riaz and Mohamad, Noor Azmi and Ahmad, Muhammad Shakil (2016) Effect of multidimensional top management support on project success: an empirical investigation. Quality and Quantity, 50 (1). pp. 151-176. ISSN 0033-5177

Chaturvedi, N. D. and Manan, Z. A. and Wan Alwi, S. R. and Bandyopadhyay, S. (2016) Effect of multiple water resources in a flexible-schedule batch water network. Journal of Cleaner Production, 125 . pp. 245-252. ISSN 0959-6526

A. H., Nur Hidayah and Md. Nor, Hasanan and Putra Jaya, Ramadhansyah (2016) Effect of open-graded coarse aggregate on concrete paving blocks properties for pavement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11836-11839. ISSN 1819-6608

Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, Mimi Sakinah and Thakur, Sveta and A. Wahid, Zularisam and Sohaili, Johan (2016) Effect of organic loading rate on hydrogen (H2) and methane (CH4) production in two-stage fermentation under thermophilic conditions using palm oil mill effluent (POME). Energy for Sustainable Development, 34 . pp. 130-138. ISSN 0973-0826

Aurangzaib, Aurangzaib and Bhattacharyya, Krishnendu and Shafie, Sharidan (2016) Effect of partial slip on an unsteady MHD mixed convection stagnation-point flow of a micropolar fluid towards a permeable shrinking sheet. Alexandria Engineering Journal, 55 (2). pp. 1285-1293. ISSN 1110-0168

Emami, Sina Davazdah and Sulaiman, Siti Zubaidah and Md. Kasmani, Rafiziana and Hamid, Mahar Diana and Che Hassan, Che Rosmani (2016) Effect of pipe configurations on flame propagation of hydrocarbons-air and hydrogen-air mixtures in a constant volume. Journal of Loss Prevention in the Process Industries, 39 . pp. 141-151. ISSN 0950-4230

Chun, W. K. and Sean, G. P. and Ismail, A. F. (2016) Effect of pmma-mwnts loading on Co2 separation performance of thin film nanocomposite membrane. Jurnal Teknologi, 78 (12). pp. 39-45. ISSN 0127-9696

Rashid, N. M. and Kishi, N. and Soga, T. (2016) Effect of pre-annealing temperature on the growth of aligned a -Fe2O3 nanowires via a two-step thermal oxidation. Surface Review and Letters, 23 (4). ISSN 0218-625X

Mohamed Rashid, Norhana and Kishi, Naoki and Soga, Tetsuo (2016) Effect of pre-annealing temperature on the growth of aligned α-Fe2o3 nanowires via a two-step thermal oxidation. Surface Review and Letters, 23 (4). ISSN 0218-625X

Hassan Kareem, Sahira and Shamsuddin, Mustaffa and Lee, Siew Ling (2016) Effect of precipitation temperature on structural and magnetic features of polyethylene glycol-coated Mn0.8Zn0.2Fe2 O 4 nanoparticles. Journal of Superconductivity and Novel Magnetism, 29 (10). pp. 2691-2697. ISSN 1557-1939

Babashamsi, Peyman and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2016) The effect of preservation maintenance activities in asphalt concrete pavement sustainability. Jurnal Teknologi, 78 (4). pp. 117-124. ISSN 0127-9696

Farahany, S. and Ghandvar, H. and Nordin, N. A. and Ourdjini, A. and Idris, M. H. (2016) Effect of primary and eutectic Mg2Si crystal modifications on the mechanical properties and sliding wear behaviour of an Al–20Mg2Si–2Cu–xBi composite. Journal of Materials Science and Technology, 32 (11). pp. 1083-1097. ISSN 1005-0302

Mukhlas, Nurul ‘Azizah and Mashros, Nordiana and Che Puan, Othman and Hassan, Sitti Asmah and Abdul Hassan, Norhidayah and Abdullah, Rini Asnida and Rahman, Raha (2016) Effect of rainfall on traffic flow characteristics during night time. Jurnal Teknologi, 78 (42553). pp. 1-7. ISSN 0127-9696

Molavi, M. and Yunus, J. and Utama, N. P. (2016) The effect of Ramadan fasting on spatial attention through emotional stimuli. Psychology Research and Behavior Management, 9 . pp. 105-114. ISSN 1179-1578

Mohamed Kamar, Haslinda and Kamsah, Nazri and Alhamid, Muhammad Idrus and Sumeru, Kasni (2016) Effect of regeneration air temperature on desiccant wheel performance. International Journal of Technology, 7 (2). pp. 281-287. ISSN 2086-9614

Pourtousi, M. and Poo, Balan Ganesan and Sandaran, Shanti Chandran and Sahu, J. N. (2016) Effect of ring sparger diameters on hydrodynamics in bubble column: a numerical investigation. Journal Of The Taiwan Institute Of Chemical Engineers, 69 . pp. 14-24. ISSN 1876-1070

Tan, Vie Ming and Quoquab, Farzana and Ahmad, Fauziah Sh. and Mohammad, Jihad (2016) Effect of self-esteem on customer citizenship behaviors among international university branch campus students. International Review of Management and Marketing, 6 (3). pp. 467-475. ISSN 2146-4405

Jbara, Ahmed S. and Othaman, Zulkafli and Saeed, Mohammad Alam (2016) Effect of size and indium-composition on linear and nonlinear optical absorption of InGaN/GaN lens-shaped quantum dot. Chinese Physics B, 25 (5). pp. 1-9. ISSN 1674-1056

Mokhtari, M. and Abdul-Malek, Z. and Salam, Z. (2016) The effect of soil ionization on transient grounding electrode resistance in non-homogeneous soil conditions. International Transactions on Electrical Energy Systems, 26 (7). pp. 1462-1475. ISSN 2050-7038

Wrzesien, Andrzej M. and Phan, Duoc T. and Lim, James B. P. and Lau, Hieng Ho and Hajirasouliha, Iman and Tan, Cher Siang (2016) Effect of stressed-skin action on optimal design of cold-formed steel square and rectangular-shaped portal frame buildings. International Journal of Steel Structures, 16 (2). pp. 299-307. ISSN 1598-2351

Nadarajan, R. and Wan Abu Bakar, W. A. and Ali, R. and Ismail, R. (2016) Effect of structural defects towards the performance of TiO2/SnO2/WO3 photocatalyst in the degradation of 1,2-dichlorobenzene. Journal of the Taiwan Institute of Chemical Engineers, 64 . pp. 106-115. ISSN 1876-1070

Umara Shettima, A. and Hussin, M. W. and Ahmad, Y. and Yau, M. (2016) Effect of sulphuric acid on concrete with iron ore tailings. Jurnal Teknologi, 78 (6-12). pp. 31-36. ISSN 0127-9696

Abdul Fatah, Nor Aiza and Triwahyono, Sugeng and Abdul Jalil, Aishah (2016) Effect of support on molybdenum oxide acidity for n-heptane isomerization. Jurnal Teknologi, 78 (8-3). pp. 19-23. ISSN 0127-9696

M. R., Yavari and dris, Mohd. Hasbullah (2016) Effect of surface roughness and taper angle on junction strength of modular biomedical implant. International Journal of Mechanical and Mechatronics Engineering, 16 (2). pp. 42-47. ISSN 2227-2771

Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Wan Mohd Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Mat, Hanapi (2016) Effect of synthesis conditions on physical properties, laccase catalytic activity and stability of sol-gel laccase. Journal of Sol-Gel Science and Technology, 80 (3). pp. 587-597. ISSN 0928-0707

Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Wan Mohamad Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Mat, Hanapi (2016) Effect of synthesis conditions on physical properties, laccase catalytic activity and stability of sol–gel laccase. Journal of Sol-Gel Science and Technology, 80 (3). pp. 587-597. ISSN 0928-0707

Leaw, Wai Loon and Mamat, Che Rozid and Triwahyono, Sugeng and Abdul Jalil, Aishah and Bidin, Noriah (2016) Effect of temperature on the morphology and electro-optical properties of liquid crystal physical gel. Materials Chemistry and Physics, 184 . pp. 197-202. ISSN 0254-0584

Fatihhi, S. J. and Abdul Rahim, Rabiatul Adibah and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Kamarul, T. and Syahrom, Ardiyansyah (2016) Effect of torsional loading on compressive fatigue behaviour of trabecular bone. Journal of the Mechanical Behavior of Biomedical Materials, 54 . pp. 21-32. ISSN 1751-6161

Ismail, Mohammad and Noruzman, Ainul Haezah and Bhutta, Muhammad Aamer Rafique and Yusuf, Taliat Ola and Ogiri, Ibrahim Hassan (2016) Effect of vinyl acetate effluent in reducing heat of hydration of concrete. Ksce Journal of Civil Engineering, 20 (1). pp. 145-151. ISSN 1226-7988

Muhammad, Yasar Javaid and Ovinis, Mark and Fakhruldin, Mohd. Hashim and Abdul Malik, Adi Maimun and Yasser, M. Ahmed and Ullah, Barkat (2016) Effect of water current on underwater glider velocity and range. Jurnal Teknologi, 78 (10-4). pp. 47-53. ISSN 0127-9696

Alatas, I. M. and Kamaruddin, S. A. and Nazir, R. and Irsyam, M. (2016) Effect of weathering on disintegration and shear strength reduction of clay shale. Jurnal Teknologi, 78 (7-3). pp. 93-99. ISSN 0127-9696

Rahman, A. A. A. and Panatik, S. A. and Alias, R. A. (2016) The effect of web 2.0 usage on innovative work behavior among academia in Malaysian research universities. Journal of Theoretical and Applied Information Technology, 93 (2). pp. 441-448. ISSN 1992-8645

Faridmehr, Iman and Osman, Mohd. Hanim and Tahir, Mahmood Md. and Razavykia, Abbas and Nejad, Ali Farokhi (2016) Effect of web holes and bearing stiffeners on flexural-shear interaction strength of steel cold-formed C-channel sections. Latin American Journal of Solids and Structures, 13 (6). pp. 1152-1166. ISSN 1679-7817

Farad, Sagala and Mugisa, John and Alahdal, Hussein A. and Idris, Ahmad Kamal and Kisiki, Nsamba Hussein and Kabenge, Isa (2016) Effect of wettability on oil recovery and breakthrough time for immiscible gas flooding. Petroleum Science and Technology, 34 (20). pp. 1705-1711. ISSN 1091-6466

Alexandrov, Sergei and Mustafa, Yusof and Ahmad, Zaini and Nguyen-Dinh, Kien (2016) Effect of white layer on residual autofrettage stresses and strains in open - end cylinders. International Journal of Pressure Vessels and Piping, 144 . pp. 49-55. ISSN 0308-0161

Abdul Rahim, Norwazan and Mohd. Jaafar, Mohammad Nazri and Sapee, Syazwan and Abdelraheem Elhaj, Hazir Farouk (2016) Effect on particulate and gas emissions by combusting biodiesel blend fuels made from different plant oil feedstocks in a liquid fuel burner. Energies, 9 (8). pp. 1-18. ISSN 1996-1073

Ariffudin, Muhammad Hafidz and Mohd. Zawawi, Fazila and Mohamed Kamar, Haslinda and Kamsah, Nazri (2016) Effectiveness of blade tip on low speed horizontal axis wind turbine performance. Jurnal Teknologi, 78 (8-4). pp. 31-39. ISSN 0127-9696

Rezania, Shahabaldin and Ponraj, Mohanadoss and Md. Din, Mohd. Fadhil and Chelliapan, Shreeshivadasan and Md. Sairan, Fadzlin (2016) Effectiveness of Eichhornia crassipes in nutrient removal from domestic wastewater based on its optimal growth rate. Desalination and Water Treatment, 57 (1). pp. 360-365. ISSN 1944-3994

Yusoff, Shaznee Iryana and Jiar, Yeo Kee (2016) The effectiveness of intervention program on short-term memory in down syndrome. Man in India, 96 (1-2). pp. 537-545. ISSN 0025-1569

Saleem, F. and Alifiah, M. N. and Tahir, M. S. (2016) The effectiveness of monitoring mechanisms for constraining earnings management: a literature survey for a conceptual framework. International Journal of Economics and Financial Issues, 6 (3). pp. 209-214. ISSN 2146-4138

Hishan, Sanil S. and Ramakrishnan, Suresh and Alwethainani, Mohammed and Kazi, Abdul Ghafoor and Siddique, Muhammad (2016) Effectiveness of supply chain management with reference to apparel industry: a case study in India. International Review of Management and Marketing, 6 (4). pp. 176-184. ISSN 2146-4405

Naubi, Irena and Zardari, Noorul Hassan and Shirazi, Sharif Moniruzzaman and Ibrahim, Nurul Farahen and Baloo, Lavania (2016) Effectiveness of water quality index for monitoring Malaysian river water quality. Polish Journal of Environmental Studies, 25 (1). pp. 231-239. ISSN 1230-1485

Yahaya, Bashir and Izman, Sudin and Idris, Mohd. Hasbullah and Dambatta, Murtala Sule (2016) Effects of activated charcoal on physical and mechanical properties of microwave dewaxed investment casting moulds. CIRP Journal of Manufacturing Science and Technology, 13 . pp. 97-103. ISSN 1755-5817

Alwan, R. A. and Wahid, M. A. and Sies, M. M. and Yasin, M. F. M. (2016) Effects of air entry of swirling flameless combustion in a low NOx burner. International Review of Mechanical Engineering, 10 (2). pp. 87-94. ISSN 1970-8734

Shafie, N. E. A. and Kamar, H. M. and Kamsah, N. (2016) Effects of air supply diffusers and air return grilles layout on contaminants concentration in bus passenger compartment. International Journal of Automotive Technology, 17 (5). pp. 751-762. ISSN 1229-9138

Abdul Hassan, Norhidayah and Mahmud, Mohd. Zul Hanif and Adi, Nurainaa and Rahmat, Noraziela and Hainin, Mohd. Rosli and Putra Jaya, Ramadhansyah (2016) Effects of air voids content on the performance of porous asphalt mixtures. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11884-11887. ISSN 1819-6608

Anuar, Nurwina and Cumming, J. and Williams, S. E. (2016) Effects of applying the PETTLEP model on vividness and ease of imaging movement. Journal of Applied Sport Psychology, 28 (2). pp. 185-198. ISSN 1041-3200

Mohd. Zul, S. and Surugau, N. (2016) Effects of ascorbic acid and ferum ions concentration on the hydrolysis of glucosinolate and myrosinase activity in the watercress (Nasturtium officinale sp.). Jurnal Teknologi, 78 (8). pp. 133-138. ISSN 0127-9696

Supee, A. and Ichimura, M. (2016) Effects of complexing agents on electrochemical deposition of FeSxOy thin films. Japanese Journal of Applied Physics, 55 (8). ISSN 0021-4922

Harun, A. N. and Ahmad, R. and Mohamed, N. (2016) The effects of continuous lighting (CL) method on the growth development of brassica chinensis for led plant factory in wsn application. Jurnal Teknologi, 78 (12-3). pp. 23-30. ISSN 0127-9696

Manshor, Hanisah and Zahirani, Ahmad and Azhar, Ahmad and Abd. Rashid, Rashita and Sulaiman, Shazreen and Abdullah, Ezzat Chan and Ahmad, Zainal Arifin (2016) Effects of Cr2O3 addition on the phase, mechanical properties, and microstructure of zirconia-toughened alumina added with TiO2 (ZTA–TiO2) ceramic composite. International Journal of Refractory Metals and Hard Materials, 61 . pp. 40-45. ISSN 0263-4368

Che Man, Rohaida and Ismail, Ahmad Fauzi and Mohd. Fuzi, Siti Fatimah Zaharah and Ghazali, Nazlee Faisal and Md. Illias, Rosli (2016) Effects of culture conditions of immobilized recombinant Escherichia coli on cyclodextrin glucanotransferase (CGTase) excretion and cell stability. Process Biochemistry, 51 (4). pp. 474-483. ISSN 1359-5113

Leow, Tingqiao and Liu, Hong and Hussin, Rosli and Ibrahim, Zuhairi and Deraman, Karim and Lintang, Hendrik Oktendy and Wan Shamsuri, Wan Nurulhuda (2016) Effects of Eu3+ and Dy3+ doping or co-doping on optical and structural properties of BaB2Si2O8 phosphor for white LED applications. Journal of Rare Earths, 34 (1). pp. 21-29. ISSN 1002-0721

Jahan, Nusrat and Fauzi, Norshila and Javed, Muhammad Arshad and Khan, Samiullah and Hanapi, Siti Zulaiha (2016) Effects of ferrous toxicity on seedling traits and ion distribution pattern in upland and low land rice under hydroponic conditions. Jurnal Teknologi, 78 (1-2). pp. 39-43. ISSN 0127-9696

Yamusa, Bello Yamusa and Hj Ahmad, Kamarudin and Abd.Rahman, Norhan (2016) Effects of gradation on hydraulic conductivity properties of compacted laterite soil liner: a review. International Journal f Scientific & Engineering Research, 7 (6). pp. 1088-1091. ISSN 2229-5518

Ihwani, Siti Suhaila and Muhtar, Adibah and Musa, Norhafizah and Abu Hasan Sazalli, Nurhasmiza and Zetty, Nurzuliana Rashed and Ab., Halim Tamuri (2016) The effects of Islamic education teachers' readiness in teaching sexual health elements. Jurnal Teknikal dan Sains Sosial (JTSS), 6 (1). pp. 119-130. ISSN 2289-7356

Mohd Marsin, A. and Muhamad, I. I. (2016) Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film. Jurnal Teknologi, 78 (6). pp. 163-168. ISSN 0127-9696

Mohd. Marsin, Aishah and Muhamad, Ida Idayu (2016) Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film. Jurnal Teknologi, 78 (6). pp. 163-168. ISSN 21803722

Sari, A. A. and Yasin, H. and Tachibana, S. and Hadibarata, T. (2016) Effects of mediators for ligninolytic enzyme production and kinetic studies on degradation of pentachlorobenzene by trametes versicolor U80. Water, Air, and Soil Pollution, 227 (9). ISSN 0049-6979

Rosnan, R. M. and Othaman, Zulkafli and Hussin, Rosli and Ati, Ali and Samavati, Alireza and Dabagh, Shadab and Zare, Samad (2016) Effects of Mg substitution on the structural and magnetic properties of Co0.5Ni0.5-xMgxFe2O4 nanoparticle ferrites. Chinese Physics B, 25 (4). pp. 1-8. ISSN 1674-1056

Mohamad, Edy Tonnizam and Latifi, Nima and Arefnia, Ali and Md. Isa, Mohamed Fauzi (2016) Effects of moisture content on the strength of tropically weathered granite from Malaysia. Bulletin of Engineering Geology and the Environment, 75 (1). pp. 369-390. ISSN 1435-9529

Aziz, S. A. A. and Mazlan, S. A. and Ismail, N. I. N. and Ubaidillah, U. and Choi, S. B. and Khairi, M. H. A. and Yunus, N. A. (2016) Effects of multiwall carbon nanotubes on viscoelastic properties of magnetorheological elastomers. Smart Materials and Structures, 25 (7). ISSN 0964-1726

Mohamed Rashid, Norhana and Kishi, Naoki and Soga, Tetsuo (2016) Effects of nanostructures on iron oxide based dye sensitized solar cells fabricated on iron foils. Materials Research Bulletin, 77 . pp. 126-130. ISSN 0025-5408

Khan, Arshad and Khan, Ilyas and Shafie, Sharidan (2016) Effects of Newtonian heating and mass diffusion on MHD free convection flow over vertical plate with shear stress at the wall. Jurnal Teknologi, 78 (42431). pp. 71-75. ISSN 0127-9696

Salleh, Sideq and Izman, Sudin and Awang, Arobi (2016) Effects of non-spherical colloidal silica slurry on Al-NiP hard disk substrate CMP application. Applied Surface Science, 360 . pp. 59-68. ISSN 0169-4332

Panatik, S. A. and Rajab, A. and Hamid, K. (2016) The effects of parenting at work program on level of work-family conflict among married workers in Malaysia. Advanced Science Letters, 22 (5-6). pp. 1352-1355. ISSN 1936-6612

Kien, Heng Ng and Bakri, Aryati and Abdul Rahman, Azizah (2016) Effects of persuasive designed courseware on children with learning difficulties in learning Malay language subject. Education and Information Technologies, 21 (5). pp. 1413-1431. ISSN 1360-2357

Yong, Ee Ling and Lin, Yi-Pin (2016) Effects of pH value and temperature on the initiation, promotion, inhibition and direct reaction rate constants of natural organic matter in ozonation. RSC Advances, 6 (22). pp. 18587-18595. ISSN 2046-2069

Rashid, N. M. and Kishi, N. and Soga, T. (2016) Effects of reduction temperature on copper nanowires growth by thermal reduction of copper oxide nanowires. Modern Physics Letters B, 30 (17).

Ng, Xin Le and Choi, Sang Long and Soehod, Khairiah (2016) The effects of servant leadership on employee’s job withdrawal intention. Asian Social Science, 12 (2). pp. 99-106. ISSN 1911-2017

Sriram, K. and Arthanareeswaran, Gangasalam and Ismail, Ahmad Fauzi and Paul, Diby (2016) Effects of special nanoparticles on fuel cell properties of sulfonated polyethersulfone membrane. International Journal of Polymeric Materials and Polymeric Biomaterials, 65 (6). pp. 294-301. ISSN 0091-4037

Hosseini, Seyed Jamal Aldin and Abd. Rahman, Ahmad Baharuddin (2016) Effects of spiral confinement to the bond behavior of deformed reinforcement bars subjected to axial tension. Engineering Structures, 112 . pp. 1-13. ISSN 0141-0296

Kchaou, Mohamed and Mat Lazim, Ahmad Razimi and Abu Bakar, Abd. Rahim and Fajoui, Jamal and Elleuch, Riadh and Jacquemin, Frédéric (2016) Effects of steel fibers and surface roughness on squealing behavior of friction materials. Transactions of the Indian Institute of Metals, 69 (6). pp. 1277-1287. ISSN 0972-2815

Krishnan, G. and Bidin, N. (2016) The effects of temperature on different laser transitions of neodymium orthovanadate crystal. Jurnal Teknologi, 78 (3). pp. 149-154. ISSN 0127-9696

Al Azawi, M. A. and Bidin, N. and Bououdina, M. and Abbas, K. N. and Al Asedy, H. J. and Ahmed, O. H. and Thahe, A. A. (2016) The effects of the ambient liquid medium on the ablation efficiency, size and stability of silver nanoparticles prepared by pulse laser ablation in liquid technique. Jurnal Teknologi, 78 (3). pp. 7-11. ISSN 0127-9696

Zuan, A. M. S. and Yong, S. Y. and Nurul, M. A. and Syahrullail, S. and Rahim, E. A. (2016) The effects of the die half angle of taper die on plane strain extrusion. Jurnal Teknologi, 78 (9-2). pp. 45-51. ISSN 0127-9696

Jaafar, Y. L. and Latif, M. J. A. and Hashim, N. H. and Kadir, M. R. A. (2016) The effects of thickness on biomechanical behavior of articular cartilage: a finite element analysis. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5331-5335. ISSN 1819-6608

Ismail, Siti Fatimah and Sahar, Md. Rahim and Ghoshal, Sib Krishna (2016) Effects of titanium nanoparticles on self-cleaning and structural features of zinc-magnesium-phosphate glass. Materials Research Bulletin, 74 . pp. 502-506. ISSN 0025-5408

Hamizan, N. I. and Zaid, N. B. M. and Noor, N. M. (2016) The effects of video learning to improve critical thinking abilities. Advanced Science Letters, 22 (12). pp. 4229-4233. ISSN 1936-6612

Shad, H. and Adnan, A. and Behbahani, H. P. and Vafaei, M. (2016) Efficiency of TLDs with bottom-mounted baffles in suppression of structural responses when subjected to harmonic excitations. Structural Engineering and Mechanics, 60 (1). pp. 131-148. ISSN 1225-4568

Anisi, Mohammad Hossein and Abdullah, Abdul Hanan (2016) Efficient data reporting in intelligent transportation systems. Networks and Spatial Economics, 16 (2). pp. 623-642. ISSN 1566-113X

Galankashi, Masoud Rahiminezhad and Fallahiarezoudar, Ehsan and Moazzami, Anoosh and Helmi, Syed Ahmad and Rohani, Jafri Mohd. and Yusof, Noordin Mohd. (2016) An efficient integrated simulation–Taguchi approach for sales rate evaluation of a petrol station. Neural Computing and Applications . pp. 1-13. ISSN 0941-0643 (In Press)

Kouhnavard, M. and Ahmad Ludin, N. and Vazifehkhah Ghaffari, B. and Sopian, K. and Abdul Karim, N. and Miyake, M. (2016) An efficient metal-free hydrophilic carbon as a counter electrode for dye-sensitized solar cells. International Journal of Photoenergy, 2016 . ISSN 1110-662X

Hashim, M. A. and Wen Hau, Y. and Baktheri, R. (2016) Efficient QRS complex detection algorithm implementation on soc-based embedded system. Jurnal Teknologi, 78 (7-5). pp. 49-58. ISSN 0127-9696

Hashim, Muhammad Amin and Hau, Yuan Wen and Bakhteri, Rabia (2016) Efficient QRS complex detection algorithm implementation on SOC-based embedded system. Jurnal Teknologi, 78 (7-5). pp. 49-58. ISSN 0127-9696

Rezania, S. and Din, M. F. M. and Taib, S. M. and Dahalan, F. A. and Songip, A. R. and Singh, L. and Kamyab, H. (2016) The efficient role of aquatic plant (water hyacinth) in treating domestic wastewater in continuous system. International Journal of Phytoremediation, 18 (7). pp. 679-685. ISSN 1522-6514

Zergani, Sara and Abdul Aziz, Zainal and Viswanathan, K. K. (2016) Elastic and seismic model for the generation of tsunamis via lattice Boltzmann method. Global Journal of Pure and Applied Mathematics, 12 (3). pp. 1979-1999. ISSN 0973-1768

Bhatti, Abdul Rauf and Salam, Zainal and Abdul Aziz, Mohd. Junaidi and Yee, Kong Pui and Ashique, Ratil H. (2016) Electric vehicles charging using photovoltaic: status and technological review. Renewable and Sustainable Energy Reviews, 54 . pp. 34-47. ISSN 1364-0321

Abd. Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Abdullah, Jaafar and Mohmad Ameran, Hanis Liyana (2016) Electrical capacitance tomography: a review on portable ECT system and hardware design. Sensor Review, 36 (1). pp. 64-70. ISSN 0260-2288

Anshar, Muhammad and Ani, Farid Nasir and Kader, Ab. Saman (2016) Electrical energy potential of rice husk as fuel for power generation in Indonesia. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3616-3624. ISSN 1819-6608

Nawawi, Z. and Kurnia, R. F. and Isa, N. F. A. and Buntat, Z. and Yuniarti, D. R. and Jambak, M.I . and Sidik, M. A. B. (2016) Electrical potential distribution in polymethyl methacrylate-graphene oxide nanocomposites. Indonesian Journal of Electrical Engineering and Computer Science, 4 (2). pp. 256-262. ISSN 2502-4752

Lim, L. W. and Aziz, F. and Muhammad, F. F. and Supangat, A. and Sulaiman, K. (2016) Electrical properties of Al/PTB7-Th/n-Si metal-polymer-semiconductor Schottky barrier diode. Synthetic Metals, 221 . pp. 169-175. ISSN 0379-6779

Hassanzadazar, Mina and Ahmadi, Mohammad Taghi and Ismail, Razali and Goudarzi, Hadi (2016) Electrical property analytical prediction on archimedes chiral carbon nanoscrolls. Journal of Electronic Materials, 45 (10). pp. 5404-5411. ISSN 0361-5235

Zakaria, Zukarnain and Shamsuddin, Sofian (2016) Electricity consumption and economic activity in Malaysia: co-integration, causality and assessing the forecasting ability of the vector error correction model. International Journal of Energy Economics and Policy, 6 (4). pp. 706-713. ISSN 2146-4553

Asa @ Esa, Nur Farahin and Abdullah, Md. Pauzi and Hassan, Mohammad Yusri and Hussin, Faridah (2016) Electricity consumption pattern disaggregation using non-intrusive appliance load monitoring method. Jurnal Teknologi, 78 (5-7). pp. 29-35. ISSN 0127-9696

Irfan, A. and Al Sehemi, A. G. and Muhammad, S. and Chaudhry, A. R. and Kalam, A. and Shkir, M. and Al Salami, A. E. and Asiri, A. M. (2016) The electro optical and charge transport study of imidazolidin derivative: quantum chemical investigations. Journal of Saudi Chemical Society, 20 (6). pp. 680-685. ISSN 1319-6103

Hanifah, Mohamad Fahrul Radzi and Jaafar, Juhana and Aziz, Madzlan and Ismail, Ahmad Fauzi and Ahmad Thirmizir, Mohd. Zharif and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Yusof, Norhaniza (2016) Electrocatalytic study of efficient synthesized graphene nanosheets incorporated with pt nanoparticles for methanol oxidation reaction. Electroanalysis, 28 (1). pp. 222-226. ISSN 1040-0397

Amsyar Azman, A. and Abdul Rahim, R. and Ibrahim, S. and Azmi, A. and Arsad, A. and Md. Yunus, M. A. (2016) Electrochemical impedance spectroscopy for palm cooking oil discriminator using planar electromagnetic sensor array. Jurnal Teknologi, 78 (7-4). pp. 51-57. ISSN 0127-9696

Razman, Nur Izzatie Hannah and Endud, Salasiah and Misnon, Izan Izwan and Ramli, Zainab (2016) Electrochemical performance of ordered mesoporous carbon modified by oxidative treatment with aqueous nitric acid. Jurnal Teknologi, 78 (42431). pp. 1-6. ISSN 0127-9696

Naje, Ahmed Samir and Chelliapan, Shreeshivadasan and Zakaria, Zuriati and A. Ajeel, Mohammed and Sopian, Kamaruzzaman and Hasan, Husam Abdulrasool (2016) Electrocoagulation by solar energy feed for textile wastewater treatment including mechanism and hydrogen production using a novel reactor design with a rotating anode. RSC Advances, 6 (12). pp. 10192-10204. ISSN 2046-2069

Naje, A. S. and Chelliapan, S. and Zakaria, Z. and Abbas, S. A. (2016) Electrocoagulation using a rotated anode: a novel reactor design for textile wastewater treatment. Journal of Environmental Management, 176 . pp. 34-44. ISSN 0301-4797

Hamedi, Mahyar and Salleh, Sh. Hussain and Mohd. Noor, Alias (2016) Electroencephalographic motor imagery brain connectivity analysis for BCI: a review. Neural Computation, 28 (6). pp. 999-1041. ISSN 0899-7667

Thang, L. Y. and Breadmore, M. C. and See, H. H. (2016) Electrokinetic supercharging in nonaqueous capillary electrophoresis for online preconcentration and determination of tamoxifen and its metabolites in human plasma. Journal of Chromatography A, 1461 . pp. 185-191. ISSN 0021-9673

Faraji, Soheila and Ani, Farid Nasir (2016) Electroless nano zinc oxide-activate carbon composite supercapacitor electrode. Journal of Electroceramics, 36 (42373). pp. 122-128. ISSN 385-3449

Faraji, S. and Ani, F. N. (2016) Electroless nano zinc oxide–activate carbon composite supercapacitor electrode. Journal of Electroceramics, 36 (1-4). pp. 122-128. ISSN 1385-3449

Abedinpourshotorban, Hosein and Shamsuddin, Siti Mariyam and Beheshti, Zahra and Abang Jawawi, Dayang Norhayati (2016) Electromagnetic field optimization: a physics-inspired metaheuristic optimization algorithm. Swarm and Evolutionary Computation, 26 . pp. 8-22. ISSN 2210-6502

Abedinpourshotorban, Hosein and Shamsuddin, Siti Mariyam and Beheshti, Zahra and Abang Jawawi, Dayang Norhayati (2016) Electromagnetic field optimization: a physics-inspired metaheuristic optimization algorithm. Swarm and Evolutionary Computation, 26 . pp. 8-22. ISSN 2210-6502

Mohamad Amin, Ahmad Zaki and Ahmad, Shamsuddin and Hoe, Yeak Su (2016) Electromagnetics car suspension system. Indian Journal of Science and Technology, 9 (40). ISSN 0974-6846

Kaur, J. and Kuwano, N. and Jamaludin, K. R. and Mitsuhara, M. and Saito, H. and Hata, S. and Suzuki, S. and Miyake, H. and Hiramatsu, K. and Fukuyama, H. (2016) Electron microscopy analysis of microstructure of postannealed aluminum nitride template. Applied Physics Express, 9 (6). ISSN 1882-0778

Mohammed, Lawal and Saeed, Mohammad Alam and Musa, Auwalu (2016) Electronic confinement for tuning optical properties in beta-InxTMzSy (TM = V, Fe, and Ti): Prospects for intermediate-band materials. Solar Energy, 137 . pp. 621-627.

Mohammed, L. and Saeed, M. A. and Musa, A. (2016) Electronic confinement for tuning optical properties in β-InxTMzSy (TM = V, Fe, and Ti): prospects for intermediate-band materials. Solar Energy, 137 . pp. 621-627. ISSN 0038-092X

Munir, J. and Mat Isa, A. R. and Yousaf, M. and Aliabad, H. A. R. and Ain, Q. U. and Saeed, M. A. (2016) Electronic, magnetic and optical properties of reduced hybrid layered complex Ni(pyz)V4O10 (pyz=C4H4N2) by first-principles. Journal of Magnetism and Magnetic Materials, 416 . pp. 241-246. ISSN 0304-8853

Etesami, M. and Chandran, N. S. N. M. S. and Hussin, M. H. and Ripin, A. and Adnan, R. and Sujari, A. N. A. and Mohamed, N. (2016) Electrooxidation of nitrite ions on gold/polyaniline/carbon paste electrode. International Journal of Electrochemical Science, 11 (10). pp. 8332-8345. ISSN 1452-3981

Vellayappan, M. V. and Venugopal, J. R. and Ramakrishna, S. and Ray, S. and Ismail, Ahmad Fauzi and Mandal, M. and Manikandan, A. and Seal, S. and Jaganathan, S. K. (2016) Electrospinning applications from diagnosis to treatment of diabetes. RSC Advances, 6 (87). pp. 83638-83655. ISSN 2046-2069

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Mohamed, Mohamad Azuwa and Ismail, Nor Hadiani and Sazali, N. and Jaafar, Jafariah and Hasbullah, Hasrinah (2016) Electrospun nanofiber-coated membrane: a review. Jurnal Teknologi, 78 (12). pp. 83-88. ISSN 0127-9696

Nur Syazana, Nur Syazana and Sukmana, Irza (2016) Electrospun-based fibrous scaffold for cardiovascular engineering applications: a review. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4778-4781. ISSN 1819-6608

Mohamed, S. and Jasmi, K. A. and Zailaini, M. A. (2016) Elements of delivering Islamic education through Islamic morality in several Malaysian schools. Pertanika Journal of Social Sciences and Humanities, 24 (4). pp. 1267-1277. ISSN 0128-7702

Ridwan, Intisar Ibrahim and Mohamed, Izzeldin Ibrahim and Ali, Rosmah and Elfadil, Nazar (2016) Embedded systems: teaching and design challenges for nonhomogeneous classes. International Journal of Multimedia and Ubiquitous Engineering, 11 (10). pp. 221-244. ISSN 1975-0080

Vejasegaran, R. and Jusoh, M. and Kamarudin, M. R. and Rahim, H. A. and Malek, F. and Sabapathy, Thennarasan and Mat Salleh, Shakhirul (2016) Embroidered dual band textile antenna for ISM band application on bending performance. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6204-6209. ISSN 1819-6608

Akrom, Nuramirah and Ismail, Zuhaimy (2016) EMD-DR models for forecasting electricity load demand. Contemporary Engineering Sciences, 9 (13-16). pp. 763-780. ISSN 1313-6569

Ahmad, B. and Abdul Wahab, N. and Rahman, A. A. (2016) Emergency shutdown valve reliability function test by automated Partial Stroke Testing System. Jurnal Teknologi, 78 (7-4). pp. 35-39. ISSN 0127-9696

Ab. Talib, M. S. and Md. Sawari, S. S. and Abdul Hamid, A. B. and Ai Chin, T. (2016) Emerging Halal food market: an Institutional Theory of Halal certificate implementation. Management Research Review, 39 (9). pp. 987-997. ISSN 2040-8269

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in eco-compliant, synergistic, and hybrid assembling of multifunctional polymeric bionanocomposites. Reviews in Chemical Engineering, 32 (3). pp. 305-361. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in flame retardancy of biofibers, biopolymers, biocomposites, and bionanocomposites. Reviews in Chemical Engineering, 32 (1). pp. 115-148. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in graphene carbon based polymer nanocomposites and applications. Reviews in Chemical Engineering, 32 (2). pp. 223-264. ISSN 0167-8299

Norzain, N. A. and Sahlan, S. and Ab. Halim, F. and Abdul Wahab, N. (2016) Empirical modelling of activated sludge process via system identification. Jurnal Teknologi, 78 (7-4). pp. 155-162. ISSN 0127-9696

Mohd. Amin, Mohd. For and Mat Yusof, Nur‘Ain and Abdullah, Rini Asnida (2016) Empirical strength envelope for shale. Jurnal Teknologi, 78 (42554). pp. 129-137. ISSN 0127-9696

Mousavi, Seyed Mohammad and Khan, Tareef Hayat and Lim, Yaik Wah (2016) Empirical validation of Radiance-IES daylight simulation for furnished and unfurnished rooms under a tropical sky. International Journal of Sustainable Building Technology and Urban Development, 7 (1). pp. 61-69. ISSN 2093-761X

Singh, Harcharanjit and Al-Amin, Abul Quasem and Baroto, Mas Bambang and Jamil, Rossilah and Pazyar, Mohammad (2016) Employee job satisfaction, customer satisfaction and profitability in 5-star hotels in Kuala Lumpur. Advanced Science Letters, 22 (5-6). pp. 1489-1492. ISSN 1936-6612

Noor, N. M. and Khan, A. A. and Hasham, R. and Talib, A. and Sarmidi, M. R. and Aziz, R. and Abd., A. (2016) Empty nano and micro-structured lipid carriers of virgin coconut oil for skin moisturisation. IET Nanobiotechnology, 10 (4). pp. 195-199. ISSN 1751-8741

Jusoh, Norela and Othman, Norasikin and Nasruddin, Nur Alina (2016) Emulsion liquid membrane technology in organic acid purification. Malaysian Journal of Analytical Sciences, 20 (2). pp. 436-443. ISSN 1394-2506

Jusoh, Norela and Othman, Norasikin and Nasruddin, Nur Alina (2016) Emulsion liquid membrane technology in organic acid purification [Teknologi emulsi membran cecair dalam penulenan asid organik]. Malaysian Journal of Analytical Sciences, 20 (2). pp. 436-443. ISSN 1394-2506

Hindia, Mohammad Nour and Rahman, T. A. and Ojukwu, H. and Hanafi, Effariza and Fattouh, A. (2016) Enabling remote health-caring utilizing IoT concept over LTE-femtocell networks. Plos One, 11 (5). pp. 1-17. ISSN 1932-6203

Isa, A. A. and Mohd. Jusan, Mahmud and Afgani, Yendo E. (2016) End-users personalization potentials and factors towards effective housing occupancy: Malaysian development perspective. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4404-4413. ISSN 1819-6608

Sadeghifam, A. N. and Marsono, A. K. and Kiani, I. and Isikdag, U. and Bavafa, A. A. and Tabatabaee, S. (2016) Energy analysis of wall materials using building information modeling (BIM) of public buildings in the tropical climate countries. Jurnal Teknologi, 78 (10). pp. 35-41. ISSN 0127-9696

Qureshi, Muhammad Imran and Md. Rasli, Amran and Zaman, Khalid (2016) Energy crisis, greenhouse gas emissions and sectoral growth reforms: repairing the fabricated mosaic. Journal of Cleaner Production, 112 . pp. 3657-3666. ISSN 0959-6526

Nasution, Henry and Dahlan, Afiq Aiman and Abdul Aziz, Azhar and Azmi, Ulul and Sumeru, Sumeru and Shodiya, Sulaimon (2016) Energy efficiency of a variable speed of the centralized air conditioning system using PID controller. Jurnal Teknologi, 78 (8-4). pp. 65-71. ISSN 0127-9696

Shaari, Roziana and Panatik, Siti Aisyah and Rajab, Azizah and Khalifah, Zainab (2016) Engaging university roles in social inclusion. Studia Negotia, 61 (3). pp. 85-98. ISSN 2065-9636

Abdul Majid, Z. and Mohsin, R. and Shihnan, A. H. (2016) Engine performance and exhaust emission of diesel dual fuel engine fuelled by biodiesel, diesel and natural gas. Jurnal Teknologi, 78 (6). pp. 59-67. ISSN 0127-9696

Muttashar, H. L. and Hussin, M. W. and Mirza, J. and Hasanah, N. and Huseien, G. F. (2016) Engineering properties of high volume biomass waste mortar. Jurnal Teknologi, 78 (8). pp. 101-108. ISSN 0127-9696

Hussin, F. and Lintang, H. O. and Yuliati, L. (2016) Enhanced activity of C3N4 with addition of ZnO for photocatalytic removal of phenol under visible light. Malaysian Journal of Analytical Sciences, 20 (1). pp. 102-110. ISSN 1394-2506

Teo, H. T. and Siah, W. R. and Yuliati, L. (2016) Enhanced adsorption of acetylsalicylic acid over hydrothermally synthesized iron oxide-mesoporous silica MCM-41 composites. Journal of the Taiwan Institute of Chemical Engineers, 65 . pp. 591-598. ISSN 1876-1070

Kassim, Mohamad Nizam and Maarof, Mohd. Aizaini and Zainal, Anazida and Abdul Wahab, Amirudin (2016) Enhanced affixation word stemmer with stemming error reducer to solve affixation stemming errors. Journal of Telecommunication, Electronic and Computer Engineering, 8 (3). pp. 37-41. ISSN 2180-1843

Tang, J. P. and Lam, H. L. and Aziz, M. K. A. and Morad, N. A. (2016) Enhanced Biomass Characteristics Index in palm biomass calorific value estimation. Applied Thermal Engineering, 105 . pp. 941-949. ISSN 1359-4311

Padmapriya, G. and Manikandan, A. and Krishnasamy, V. and Jaganathan, S. K. and Antony, S. A. (2016) Enhanced catalytic activity and magnetic properties of spinel MnxZn1-xFe2O4(0.0 ≤ x ≤ 1.0) nano-photocatalysts by microwave irradiation route. Journal of Superconductivity and Novel Magnetism, 29 (8). pp. 2141-2149. ISSN 1557-1939

Shukor, N. A. M. and Seman, N. (2016) Enhanced Design of Two-Section Microstrip-Slot Branch Line coupler with the overlapped λ/4 open circuited lines at ports. Wireless Personal Communications, 88 (3). pp. 467-478. ISSN 0929-6212

Lee, C. Y. and You, K. Y. and Tan, T. S. and Then, Y. L. and Lee, Y. S. and Zahid, L. and Lim, W. L. and Lee, C. H. (2016) Enhanced five-port ring circuit reflectometer for synthetic breast tissue dielectric determination. Progress In Electromagnetics Research C, 69 . pp. 83-95. ISSN 1937-8718

Atta, M. and Bukhari, A. and Idris, A. (2016) Enhanced lipid selective extraction from Chlorella vulgaris without cell sacrifice. Algal Research, 20 . pp. 7-15. ISSN 2211-9264

Inuwa, I. M. and Arjmandi, R. and Ibrahim, A. N. and Haafiz, M. K. M. and Wong, S. L. and Majeed, K. and Hassan, A. (2016) Enhanced mechanical and thermal properties of hybrid graphene nanoplatelets/multiwall carbon nanotubes reinforced polyethylene terephthalate nanocomposites. Fibers and Polymers, 17 (10). pp. 1657-1666. ISSN 1229-9197

Sazali, E. S. and Sahar, M. R. and Arifin, R. and Ghoshal, S. K. and Hamzah, K. and Rohani, M. S. (2016) Enhanced optical properties of TeO2-PbO-PbCl2-Er2o3-AuCl3 glass. Digest Journal of Nanomaterials and Biostructures, 11 (3). pp. 715-718. ISSN 1842-3582

Al Nuzaili, Q. and Mohd. Hashim, S. Z. and Saeed, F. and Khalil, M. S. and Mohamad, D. B. (2016) Enhanced structural perceptual feature extraction model for Arabic literal amount recognition. International Journal of Intelligent Systems Technologies and Applications, 15 (3). pp. 240-254. ISSN 1740-8865

Bakhsheshi-Rad, H. R. and Hamzah, E. and Daroonparvar, M. and Abdul Kadir, M. R. and Kasiri-Asgarani, M. and Staiger, M. P. (2016) Enhancement of corrosion resistance and mechanical properties of Mg–1.2Ca–2Bi via a hybrid silicon-biopolymer coating system. Surface and Coatings Technology, 301 . pp. 133-139. ISSN 0257-8972

Abouzari lotf, E. and Jacob, M. V. and Ghassemi, H. and Ahmad, A. and Nasef, M. M. and Zakeri, M. and Mehdipour Ataei, S. (2016) Enhancement of fuel cell performance with less-water dependent composite membranes having polyoxometalate anchored nanofibrous interlayer. Journal of Power Sources, 326 . pp. 482-489. ISSN 0378-7753

Khandanlou, R. and Fard Masoumi, H. R. and Ahmad, M. B. and Shameli, K. and Basri, M. and Kalantari, K. (2016) Enhancement of heavy metals sorption via nanocomposites of rice straw and Fe3O4 nanoparticles using artificial neural network (ANN). Ecological Engineering, 91 . pp. 249-256. ISSN 0925-8574

Ab. Aziz, Mohamad Firdaus and Shamsuddin, Siti Mariyam (2016) Enhancement of quantum particle swarm optimization in elman recurrent network with bounded VMAX function. Jurnal Teknologi, 78 (12-2). pp. 43-48. ISSN 0127-9696

Anjomshoae, S. T. and Rahim, M. S. M. (2016) Enhancement of template-based method for overlapping rubber tree leaf identification. Computers and Electronics in Agriculture, 122 . pp. 176-184. ISSN 0168-1699

Shawky, A. I. and Megat Mohd. Noor, M. J. and Nasef, M. M. and Khayet, M. and Nallappan, M. and Ujang, Z. (2016) Enhancing antimicrobial properties of poly(vinylidene fluoride)/hexafluoropropylene copolymer membrane by electron beam induced grafting of: N -vinyl-2-pyrrolidone and iodine immobilization. RSC Advances, 6 (48). pp. 42461-42473. ISSN 2046-2069

Mohamed, Hasnah (2016) Enhancing essay writing skills using 'track changes' Meningkatkan kemahiran menulis karangan melalui penggunaan track changes. Malaysian Journal of Learning and Instruction, 13 (1). pp. 135-159. ISSN 1675-8110

Mohamed, Hasnah (2016) Enhancing essay writing skills using track changes: Meningkatkan kemahiran menulis karangan melalui penggunaan track changes. Malaysian Journal of Learning and Instruction, 13 (1). pp. 135-159. ISSN 1675-8110

Rahim, R. A. and Nik Mahmood, N. H. and Masrom, M. (2016) Enhancing Malaysian’s SMEs performance: leadership and innovation. Advanced Science Letters, 22 (5-6). pp. 1530-1534. ISSN 1936-6612

Othman, Suhaimi Zakaria and Mohd. Zaid, Norasykin and Abdullah, Zaleha and Mohammed, Hasnah and Aris, Baharuddin (2016) Enhancing meaningful learning in MRSP120 rotational model. Man in India, 96 (1-2). pp. 525-536. ISSN 0025-1569

Mohammed, A. Al-Shargabi and Shaikh, Asadullah and Ismail, Abdul Samad (2016) Enhancing the quality of service for real time traffic over optical burst switching (OBS) networks with ensuring the fairness for other traffics. PLOS One, 11 (9). E0161873161873-E0161873. ISSN 1932-6203

Mohd. kosnin, Azlina and A. Samah, Narina and Khan, Muhammad Umar (2016) Entering university experience and selfregulated learning among undergraduate students. Man in India, 96 (1-2). pp. 457-467. ISSN 0025-1569

Bakar, N. A. A. and Kama, N. and Harihodin, S. (2016) Enterprise architecture development and implementation in public sector: The Malaysian perspective. Journal of Theoretical and Applied Information Technology, 88 (1). pp. 176-188. ISSN 1992-8645

Ogbari, M. E. and Oke, A. O. and Ibukunoluwa, A. A. and Ajagbe, M. A. and Ologbo, A. C. (2016) Entrepreneurship and business ethics: implications on corporate performance. International Journal of Economics and Financial Issues, 6 (3). pp. 50-58. ISSN 2146-4138

Johari, Nabila and Kahar, Rohayah and Habil, Hadina and Abdul Hamid, Siti Aishah (2016) Entrepreneurship education: incorporation of soft skills through hands-on experience. Man in India, 96 (1-2). pp. 161-171. ISSN 0025-1569

Jamaludin, N. F. and Ab. Muis, Z. and Hashim, H. and Ahamad, R. (2016) Environmental index for palm oil mill. Chemical Engineering Transactions, 52 . pp. 1177-1182. ISSN 2283-9216

Shafaghat, Arezou and Keyvanfar, Ali and Manteghi, Golnoosh and Lamit, Hasanuddin (2016) Environmental-conscious factors affecting street microclimate and individuals' respiratory health in tropical coastal cities. Sustainable Cities and Society, 21 . pp. 35-50. ISSN 2210-6707

Wan Azelee, N. I. and Jahim, J. M. and Ismail, A. F. and Fuzi, S. F. Z. M. and Rahman, R. A. and Ghazali, N. F. and Illias, R. M. (2016) Enzymatic hydrolysis of pretreated kenaf using a recombinant xylanase: effects of reaction conditions for optimum hemicellulose hydrolysis. American Journal of Agricultural and Biological Science, 11 (2). pp. 54-66. ISSN 1557-4989

Butt, S. H. and Rafique, M. S. and Siraj, K. and Latif, A. and Afzal, A. and Awan, M. S. and Bashir, S. and Iqbal, N. (2016) Epitaxial thin-film growth of Ruddlesden–Popper-type Ba3Zr2O7 from a BaZrO3 target by pulsed laser deposition. Applied Physics A: Materials Science and Processing, 122 (7). ISSN 0947-8396

Mohd. Nor, Norehan and Hashim, Suhairul and Ramli, Ahmad Termizi and Saion, Elias and Kadni, Taiman (2016) EPR dosimeter material properties of potassium tartrate hemihydrate. Radiation Measurements, 87 . pp. 8-12. ISSN 1350-4487

Nurhafizah, H. and Rohani, M. S. and Ghoshal, S. K. (2016) Er3 +:Nd3 + concentration dependent spectral features of lithium-niobate-tellurite amorphous media. Journal of Non-Crystalline Solids, 443 . pp. 23-32. ISSN 0022-3093

Shah, M. B. N. and Husain, A. R. and Aysan, H. and Punnekkat, S. and Dobrin, R. and Bender, F. A. (2016) Error handling algorithm and probabilistic analysis under fault for CAN-based steer-by-wire system. IEEE Transactions on Industrial Informatics, 12 (3). pp. 1017-1034. ISSN 1551-3203

Yahya, H. and Ahmad, M. N. and Mohamad, R. and Mohd Rodzi, M. Z. (2016) Essential knowledge transfer process model to support disaster management. Journal of Theoretical and Applied Information Technology, 87 (3). pp. 404-414. ISSN 1992-8645

Salleh, W. M. N. H. W. and Ahmad, F. and Khong, H. Y. (2016) Essential oil compositions and antimicrobial activity of Piper arborescens Roxb. Marmara Pharmaceutical Journal, 20 (2). pp. 111-115. ISSN 1309-0801

Kirzhner, V. and Volkovich, Z. and Ravve, E. and Weber, G. W. (2016) An estimate of the objective function optimum for the network Steiner problem. Annals of Operations Research, 238 (1-2). pp. 315-328. ISSN 0254-5330

Adab, H. and Kanniah, K. D. and Beringer, J. (2016) Estimating and up-scaling fuel moisture and leaf dry matter content of a temperate humid forest using multi resolution remote sensing data. Remote Sensing, 8 (11). ISSN 2072-4292

Nor, N. S. M. and Puan, O. C. and Mashros, N. and Ibrahim, M. K. B. (2016) Estimating average daily traffic using alternative method for single carriageway road in Southern Region Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14092-14096. ISSN 1819-6608

Ismail, Maznah and Hashim, Noor Baharim and Kazemi, Ziba (2016) Estimating dissolved oxygen depletion in inner western Johor strait, Malaysia using a three dimensional water quality model. Malaysian Journal of Civil Engineering, 28 (3). pp. 240-251. ISSN 1823-7843

Phua, M. H. and Hue, S. W. and Ioki, K. and Hashim, M. and Bidin, K. and Musta, B. and Suleiman, M. and Yap, S. W. and Maycock, C. R. (2016) Estimating logged-over lowland rainforest aboveground biomass in Sabah, Malaysia using airborne LiDAR data. Terrestrial, Atmospheric and Oceanic Sciences, 27 (4). pp. 481-489. ISSN 1017-0839

Ishak, M. H. and Sipan, I. and Sapri, M. and Mar Iman, A. H. and Martin, D. (2016) Estimating potential saving with energy consumption behaviour model in higher education institutions. Sustainable Environment Research, 26 (6). pp. 268-273. ISSN 2468-2039

Hassan, A. A. G. and Saari, M. Y. and Utit, C. and Hassan, A. and Harun, M. (2016) Estimating the impact of gst on cost of production and cost of living in Malaysia. Jurnal Ekonomi Malaysia, 50 (2). pp. 15-30. ISSN 0126-1962

Khraief, Naceur and Shahbaz, Muhammad and Mallick, Hrushikesh and Loganathan, Nanthakumar (2016) Estimation of electricity demand function for Algeria: revisit of time series analysis. Renewable and Sustainable Energy Reviews . ISSN 1364-0321 (In Press)

Ahmad, M. R. and Esa, M. R. M. (2016) The estimation of power flux of microwave radiation from a negative narrow bipolar pulse a low earth orbit satellite altitude. Journal of Telecommunication, Electronic and Computer Engineering, 8 (1). pp. 115-119. ISSN 2180-1843

Halid, N. S. T. and Zainal, R. and Daud, Y. M. (2016) Estimation of temperature and electron density in stainless steel plasma using laser induced breakdown spectroscopy. Jurnal Teknologi, 78 (3). pp. 99-103. ISSN 0127-9696

Yasir, Muhammad and Mohamad, Noor Azmi (2016) Ethics and morality: comparing ethical leadership with servant, authentic and transformational leadership styles. International Review of Management and Marketing, 6 (4). pp. 310-316. ISSN 2146-4405

Assadi, M.K. and Zahraee, S.M. and Isaabadi, Mohammad Hossein Zaeimbashi and Habib, K. (2016) Evaluating different scenarios for optimizing energy consumption to achieve sustainable green building in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 12112-12116. ISSN 1819-6608

Taheri, Mohammad Mahdi and Rezazadeh Shirdar, Mostafa and Keyvanfar, Ali and Shafaghat, Arezou (2016) Evaluating hydrothermal synthesis of fluorapatite nanorods: pH and temperature. Journal of Experimental Nanoscience . pp. 1-11. ISSN 1745-8080 (In Press)

Mohamed Abdullah, N. A. and Abdul Hassan, N. and Mohd. Shukry, N. A. and Mahmud, M. Z. H. and Putrajaya, R. and Hainin, M. R. and Md. Yusoff, N. I. (2016) Evaluating potential of diatomite as anti clogging agent for porous asphalt mixture. Jurnal Teknologi, 78 (7-2). pp. 105-111. ISSN 0127-9696

Bahreini, Azin and Mirzaei, Hamed and Moeinaddini, Mehdi and Asadi-Shekari, Zohreh and Shah, Muhammad Zaly and Sultan, Zahid (2016) Evaluating significant factors that influence public transport usage in Kerman, Iran. Planning Malaysia, 4 (Specia). pp. 99-108. ISSN 1675-6215

Hashim, Wardati and Hainin, Mohd. Rosli and Ismail, Norfarah Nadia and Md. Yusoff, Nur Izzi and Abdullah, Mohd. Ezree and Abdul Hassan, Norhidayah (2016) Evaluating the cooling rate of hot mix asphalt in tropical climate. Jurnal Teknologi, 78 (4). pp. 97-104. ISSN 0127-9696

Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Zeynali, I. and Jomehzadeh, F. (2016) Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher. Energy and Buildings, 126 . pp. 287-300. ISSN 0378-7788

Baharuddin, Nur Khaida and Nazri, Fadzli Mohamed and Jaya, Ramadhansyah Putra and Abu Bakar, Badorul Hisyam (2016) Evaluation of bond strength between fire-damaged normal concrete substance and ultra-high-performance fiber-reinforced concrete as a repair material. World Journal of Engineering, 13 (5). pp. 461-466. ISSN 1708-5284

Zohreh, M. and Junin, R. and Bakhtiary, H.A. and Poor, S.T. and Mohamadian, R. and Movahed, A.A. (2016) The evaluation of borehole imaging result comparing with cores in Sarvak fractured and non-fractured reservoir. Arabian Journal of Geosciences, 9 (3). ISSN 1866-7511

Ting, T. M. and Nasef, M. M. and Hashim, K. (2016) Evaluation of boron adsorption on new radiation grafted fibrous adsorbent containing N-methyl-D-glucamine. Journal of Chemical Technology and Biotechnology, 91 (7). pp. 2009-2017. ISSN 0268-2575

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Mubin, M. (2016) Evaluation of different peak models of eye blink EEG for signal peak detection using artificial neural network. Neural Network World, 26 (1). pp. 67-89. ISSN 1210-0552

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Cumming, P. and Mubin, M. (2016) Evaluation of different time domain peak models using extreme learning machine-based peak detection for EEG signal. SpringerPlus, 5 (1). ISSN 2193-1801

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2016) Evaluation of electromagnetics radiation for stroke patients and non-stroke participants according to body segmentation. Jurnal Teknologi, 78 (6-3). pp. 47-52. ISSN 0127-9696

Zahan, K. A. and Pae, N. and Muhamad, I. I. (2016) An evaluation of fermentation period and discs rotation speed of rotary discs reactor for bacterial cellulose production. Sains Malaysiana, 45 (3). pp. 393-400. ISSN 0126-6039

Idris, M. I. T. and Omar, A. H. and Awang Hamid, D. H. T. and Sulaiman, F. B. (2016) Evaluation of hajj instrument (HAJI) psychometric properties using rasch measurement. Asian Social Science, 12 (8). pp. 212-218. ISSN 1911-2017

Selvakumaran, Suguna and Muhamad, Ida Idayu and Abd. Razak, Saiful Izwan (2016) Evaluation of kappa carrageenan as potential carrier for floating drug delivery system: effect of pore forming agents. Carbohydrate Polymers, 135 . pp. 207-214. ISSN 0144-8617

Azimi, M. and Bagherpourhamedani, A. and Md. Tahir, M. and Sam, A. R. B. M. and Ma, C. K. (2016) Evaluation of new spiral shear reinforcement pattern for reinforced concrete joints subjected to cyclic loading. Advances in Structural Engineering, 19 (5). pp. 730-745. ISSN 1369-4332

Hashim, S. and Karim, M. K. A. and Bakar, K. A. and Sabarudin, A. and Chin, A. W. and Saripan, M. I. and Bradley, D. A. (2016) Evaluation of organ doses and specific k effective dose of 64-slice CT thorax examination using an adult anthropomorphic phantom. Radiation Physics and Chemistry, 126 . pp. 14-20. ISSN 0969-806X

Oluwasola, E. A. and Hainin, M. R. (2016) Evaluation of performance characteristics of stone mastic asphalt incorporating industrial waste. Journal of Materials in Civil Engineering, 28 (12). ISSN 0899-1561

Nabgan, W. and Abdullah, T. A. T. and Mat, R. and Nabgan, B. and Gambo, Y. and Johari, A. (2016) Evaluation of reaction parameters of the phenol steam reforming over Ni/Co On ZrO2 using the full factorial experimental design. Applied Sciences (Switzerland), 6 (8). ISSN 2076-3417

Khodadadi, Touraj and A. K. M., Muzahidul Islam and Baharun, Sabariah and Komaki, Shozo (2016) Evaluation of recognition-based graphical password schemes in terms of usability and security attributes. International Journal of Electrical and Computer Engineering (IJECE), 6 (6). pp. 2939-2948. ISSN 2088-8708

Muniandy, J. M. and Yusop, Z. and Askari, M. (2016) Evaluation of reference evapotranspiration models and determination of crop coefficient for Momordica charantia and Capsicum annuum. Agricultural Water Management, 169 . pp. 77-89. ISSN 0378-3774

Abd Wahid, S. S. and Nawawi, Z. and Jambak, M. I. and Arief, Y. Z. and Sidik, M. A. B. and Mustafa, M. W. and Adzis, Z. (2016) Evaluation of residential grid-connected photovoltaic system as the potential energy source in Malaysia. Telkomnika (Telecommunication Computing Electronics and Control), 14 (4). pp. 1235-1241. ISSN 1693-6930

Rahiman, M. H. F. and Rahim, R. A. and Rahim, H. A. and Green, R. G. and Zakaria, Z. and Mohamad, E. J. and Muji, S. Z. M. (2016) An evaluation of single plane ultrasonic tomography sensor to reconstruct three-dimensional profiles in chemical bubble column. Sensors and Actuators, A: Physical, 246 . pp. 18-27. ISSN 0924-4247

Abd. Aziz, P. D. and Wahid, S. S. A. and Arief, Yanuar Zulardiansyah and Ab. Aziz, N. (2016) Evaluation of solar energy potential in Malaysia. Trends in Bioinformatics, 9 (2). pp. 35-43. ISSN 1994-7941

Chow, Ming Fai and Yusop, Zulkifli and Teo, Fang Yenn (2016) Evaluation of stormwater runoff quality during monsoon and inter-monsoon seasons at tropical urban catchments. International Journal of River Basin Management, 14 (1). pp. 75-82. ISSN 1571-5124

Hasan, M. A. F. M. R. and Keramat, M. M. and Shahid, S. and Yasmin, R. and Mohsenipour, M. and Sattar, G. S. (2016) Evaluation of subsurface lithologic units for groundwater exploration in the Barind Tract of Bangladesh. Geotechnical and Geological Engineering, 34 (5). pp. 1395-1411. ISSN 0960-3182

Arif, S. M. and Ma, N. L. and Wagiran, A. and Rahmat, Z. (2016) Evaluation of three RNA extraction methods from three cultivars of Malaysian upland rice. Jurnal Teknologi, 78 (1). pp. 109-112. ISSN 0127-9696

Khalili, E. and Javed, M. A. and Huyop, F. and Rayatpanah, S. and Jamshidi, S. and Wahab, R. A. (2016) Evaluation of trichoderma isolates as potential biological control agent against soybean charcoal rot disease caused by Macrophomina phaseolina. Biotechnology and Biotechnological Equipment, 30 (3). pp. 479-488. ISSN 1310-2818

Rezania, S. and Md. Din, M. F. and Kamaruddin, S. F. and Taib, S. M. and Singh, L. and Yong, E. L. and Dahalan, F. A. (2016) Evaluation of water hyacinth (Eichhornia crassipes) as a potential raw material source for briquette production. Energy, 111 . pp. 768-773. ISSN 0360-5442

Mahmud, K. N. and Yahayu, M. and Sarip, S. H. Md. and Rizan, N. H. and Min, C. B. and Mustafa, N. F. and Ngadiran, S. and Ujang, S. and Zakaria, Z. A. (2016) Evaluation on efficiency of pyroligneous acid from palm kernel shell as antifungal and solid pineapple biomass as antibacterial and plant growth promoter. Sains Malaysiana, 45 (10). pp. 1423-1434. ISSN 0126-6039

Rahman, N. H. A. and Lee, M. H. and Suhartono, Suhartono and Latif, M. T. (2016) Evaluation performance of time series approach for forecasting air pollution index in Johor, Malaysia. Sains Malaysiana, 45 (11). pp. 1625-1633. ISSN 0126-6039

Ali Sidahmed, Heyam Mohamed and Mohd. Hashim, Najihah and Mohan, Syam Morali and Abdelwahab, Siddig Ibrahim and Taha, Manal Mohamed Elhassan and Dehghan, Firouzeh and Yahayu, Maizatulakmal Akmal and Cheng, Gwendoline Lian Ee and Loke, Mun Fai and Vadivelu, Jamuna (2016) Evidence of the gastroprotective and anti-helicobacter pylori activities of β-mangostin isolated from Cratoxylum arborescens (Vahl) blume. Drug Design, Development and Therapy, 10 . pp. 297-313. ISSN 1177-8881

Lim, Z. J. and Mustafa, M. W. (2016) Evolved intelligent clustered bee colony for voltage stability prediction on power transmission system. Soft Computing, 20 (8). pp. 3215-3230. ISSN 1432-7643

Mohd. Yusof, Mohd. Fadil and Ismail, Hairul Nizam (2016) The evolvement of brand identity of Langkawi Island, Malaysia. Planning Malaysia, 4 (Specia). pp. 329-342. ISSN 1675-6215

Mohamad, A.Q. and Khan, I. and Ismail, Z. and Shafie, S. (2016) Exact solutions for unsteady free convection flow over an oscillating plate due to non-coaxial rotation. SpringerPlus, 5 (1). ISSN 2193-1801

Zaid, S. B. and Zakaria, M. H. and Rashid, R. A. and Ismail, N. S. (2016) An examination of negotiation process among ESL learners in higher institution. International Journal of Applied Linguistics and English Literature, 5 (6). pp. 228-234. ISSN 2200-3592

Khosravi, A. and Ahmad, M. N. (2016) Examining antecedents of knowledge-sharing factors on research supervision: an empirical study. Education and Information Technologies, 21 (4). pp. 783-813. ISSN 1360-2357

Alavi, S. A. and Rezaei, S. and Valaei, N. and Wan Ismail, W. K. (2016) Examining shopping mall consumer decision-making styles, satisfaction and purchase intention. International Review of Retail, Distribution and Consumer Research, 26 (3). pp. 272-303. ISSN 0959-3969

Ahmad, N. L. and Rashid, W. E. W. and Yunus, N. A. M. and Mahmood, N. H. N. and Shamsuddin, S. (2016) Examining the demand for green events to promote sustainable practices in tourism: a concept paper. Advanced Science Letters, 22 (5-6). pp. 1402-1405. ISSN 1936-6612

Samah, N. A. and Jaffri, H. and Nawawi, A. and Mohd. Tahir, L. and ShaAmeri, A. Z. and Sheikh, U. U. (2016) Examining the practice of scaffolding during problem/project based laboratory. Man in India, 96 (1-2). pp. 311-323. ISSN 0025-1569

Al Dhubhani, R. and Eassa, F. and Saeed, F. (2016) Exascale message passing interface based program deadlock detection. International Journal of Electrical and Computer Engineering, 6 (2). pp. 887-894. ISSN 2088-8708

Abdul Rashid, Nur Izzati and Samsudin, Ruhaidah and Shabri, Ani (2016) Exchange rate forecasting using modified empirical mode decomposition and least squares support vector machine. International Journal of Advances in Soft Computing and its Applications, 8 (3). pp. 31-47. ISSN 2074-8523

Harun, A. N. and Samad, S. A. and Nawi, M. N. M. and Haron, N. A. (2016) Existing practices of building information modeling (BIM) implementation in the public sector. International Journal of Supply Chain Management, 5 (4). pp. 166-177. ISSN 2051-3771

Wan-Mohtar, W. A. A. Q. I. and Abd. Malek, R. and Harvey, L. M. and McNeil, B. (2016) Exopolysaccharide production by Ganoderma lucidum immobilised on polyurethane foam in a repeated-batch fermentation. Biocatalysis and Agricultural Biotechnology, 8 . pp. 24-31. ISSN 1878-8181

Jamil, Wan Juzaili and Abdul Rahman, Hasimah and Baharin, Kyairul Azmi (2016) Experiment-based study on the impact of soiling on PV systems performance. International Journal of Electrical and Computer Engineering, 6 (2). pp. 810-818. ISSN 2088-8708

Al Fakih, A. M. and Abdallah, H. H. and Maarof, H. and Aziz, M. (2016) Experimental and quantum chemical calculations on corrosion inhibition of mild steel by two furan derivatives. Jurnal Teknologi, 78 (6-12). pp. 121-125. ISSN 0127-9696

Onuoha, M. D. U. and Ismail, I. and Ismail, A. S. and Mansor, M. F. (2016) Experimental determination of flow patterns and water holdup of low viscosity oil-water system in horizontal pipes. Sains Malaysiana, 45 (11). 1635 1640. ISSN 0126-6039

Mohammed Khdher, Abdolbaqi and Che Sidik, Nor Azwadi and Wan Hamzah, Wan Azmi and Mamat, Rizalman (2016) An experimental determination of thermal conductivity and electrical conductivity of bio glycol based Al2O3 nanofluids and development of new correlation. International Communications in Heat and Mass Transfer, 73 . pp. 75-83. ISSN 0735-1933

Abdolbaqi, M. K. and Sidik, N. A. C. and Aziz, A. and Mamat, R. and Azmi, W. H. and Yazid, M. N. A. W. M. and Najafi, G. (2016) An experimental determination of thermal conductivity and viscosity of BioGlycol/water based TiO2 nanofluids. International Communications in Heat and Mass Transfer, 77 . pp. 22-32. ISSN 0735-1933

Mohd. Shukry, N. A. and Abdul Hassan, N. and Hainin, M. R. and Abdullah, M. E. and Mohamed Abdullah, N. A. and Mahmud, M. Z. H. and Putrajaya, R. and Mashros, N. (2016) Experimental evaluation of antistripping additives on porous asphalt mixtures. Jurnal Teknologi, 78 (7-2). pp. 113-119. ISSN 0127-9696

Abdolbaqi, M. K. and Sidik, N. A. C. and Rahim, M. F. A. and Mamat, R. and Azmi, W. H. and Yazid, M. N. A. W. M. and Najafi, G. (2016) Experimental investigation and development of new correlation for thermal conductivity and viscosity of BioGlycol/water based SiO2 nanofluids. International Communications in Heat and Mass Transfer, 77 . pp. 54-63. ISSN 0735-1933

Rahmani, O. and Highfield, J. and Junin, R. and Tyrer, M. and Pour, A. B. (2016) Experimental investigation and simplistic geochemical modeling of CO2 mineral carbonation using the mount tawai peridotite. Molecules, 21 (3). ISSN 1420-3049

Yusri, I. M. and Mamat, R. and Azmi, W. H. and Najafi, G. and Sidik, N. A. C. and Awad, O. I. (2016) Experimental investigation of combustion, emissions and thermal balance of secondary butyl alcohol-gasoline blends in a spark ignition engine. Energy Conversion and Management, 123 . pp. 1-14. ISSN 0196-8904

Khan, R. and Alderliesten, R. and Badshah, S. and Khattak, M. A. and Khan, M. S. and Benedictus, R. (2016) Experimental investigation of the microscopic damage development at mode i fatigue delamination tips in carbon/epoxy laminates. Jurnal Teknologi, 78 (11). pp. 33-40. ISSN 0127-9696

Mohd Hashim, Mohd. H. and Mohd Sam, Abdul R. and Hussin, Mohd W. (2016) Experimental investigation on the effect of natural tropical weather on interfacial bonding performance of CFRP-concrete bonding system. Journal of Engineering Science and Technology, 11 (4). pp. 584-604. ISSN 1823-4690

Latifi, N. and Marto, A. and Eisazadeh, A. (2016) Experimental investigations on behaviour of strip footing placed on chemically stabilised backfills and flexible retaining walls. Arabian Journal for Science and Engineering, 41 (10). pp. 4115-4126. ISSN 1319-8025

Zahedi, Y. and Ngah, R. and Nunoo, S. and Mokayef, M. and Alavi, S. E. and Amiri, I. S. (2016) Experimental measurement and statistical analysis of the RMS delay spread in time-varying ultra-wideband communication channel. Measurement: Journal of the International Measurement Confederation, 89 . pp. 179-188. ISSN 0263-2241

Al-Aboosi, Y. Y. and Sha'ameri, A. Z. (2016) Experimental multipath delay profile of underwater acoustic communication channel in shallow water. Indonesian Journal of Electrical Engineering and Computer Science, 2 (2). pp. 351-358. ISSN 2502-4752

Lamide, J. A. and Mohamed, R. N. and Abd. Rahman, A. B. (2016) Experimental results on the shear behaviour of steel fibre self-compacting concrete (SFSCC) beams. Jurnal Teknologi, 78 (11). pp. 103-111. ISSN 0127-9696

Uzair, M. A. and Waqas, A. and Khoja, A. H. and Ahmed, N. (2016) Experimental study of catalytic degradation of polypropylene by acid-activated clay and performance of Ni as a promoter. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (24). pp. 3618-3624. ISSN 15567-036

Abyn, Hassan and Islam, M. Rafiqul and Abdul Malik, Adi Maimun and Mahmoudi, Amin and Kato, Jaswar (2016) Experimental study of motions of two floating offshore structures in waves. Brodogradnja, 67 (2). pp. 1-13. ISSN 0007-215X

Sulaiman, S. Z. and Kasmani, R. M. and Mustafa, A. (2016) Experimental study on flame propagation in a straight pipe. Jurnal Teknologi, 78 (8-3). pp. 71-75. ISSN 0127-9696

Ibrahim, I. S. and Elliott, K. S. and Abdullah, R. and Kueh, A. B. H. and Sarbini, N. N. (2016) Experimental study on the shear behaviour of precast concrete hollow core slabs with concrete topping. Engineering Structures, 125 . pp. 80-90. ISSN 0141-0296

M'hamed, B. and Che Sidik, N. A. and Akhbar, M. F. A. and Mamat, R. and Najafi, G. (2016) Experimental study on thermal performance of MWCNT nanocoolant in Perodua Kelisa 1000cc radiator system. International Communications in Heat and Mass Transfer, 76 . pp. 156-161. ISSN 0735-1933

Nasrollahpour, R. and Jamal, M. H. and Ismail, Z. and Rusli, N. M. (2016) Experiments on the dynamics of density currents. Jurnal Teknologi, 78 (9-4). pp. 71-76. ISSN 0127-9696

Hamzah, A. and Hamid, F. A. and Ismail, R. (2016) Explicit continuous charge-based compact model for long channel heavily doped surrounding-gate MOSFETs incorporating interface traps and quantum effects. Semiconductor Science and Technology, 31 (12). ISSN 0268-1242

Ahmad Khan, Rafiq and Wang, Junfeng and Muhammad Arif, Muhammad Arif and Khan, Ullah Siffat and Idris, Muhammad Yazid (2016) An exploratory study of communication and coordination challenges in offshore software development outsourcing: results of systematic literature review and empirical study. Science International, 5 (28). pp. 4819-4836. ISSN 1013-5316

Ariffin, Aqbal Hafeez and Solah, Mohd. Syazwan and Hamzah, Azhar and Md. Isa, Mohd. Hafzi and Mohd. Jawi, Zulhaidi and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2016) Exploratory study on airbag suitability for low engine capacity motorcycles. Jurnal Teknologi, 78 (4). pp. 65-69. ISSN 0127-9696

Hasan, N. and Rahman, A. A. (2016) Exploring factors that influence customer engagement in value co-creation in higher education institutions using online platforms. Journal of Theoretical and Applied Information Technology, 90 (2). pp. 247-260. ISSN 1992-8645

Attan, A. and Raof, A. H. A. and Hamzah, M. and Omar, N. A. M. and Yusof, M. A. M. (2016) Exploring industry expectations of graduating students oral communicative ability. Asian ESP Journal, 12 (3). pp. 25-39. ISSN 1833-3001

Yi, Wee Sin and Mohd. Jamal, Noriza and Chin, Tho Oai (2016) Exploring supply chain collaboration: evolution, definition and benefits. Social Sciences (Pakistan), 11 (11). pp. 2845-2851. ISSN 1818-5800

Colenbrander, S. and Gouldson, A. and Sudmant, A. H. and Papargyropoulou, E. and Chau, L. W. and Ho, C. S. (2016) Exploring the economic case for early investment in climate change mitigation in middle-income countries: a case study of Johor Bahru, Malaysia. Climate and Development, 8 (4). pp. 351-364. ISSN 1756-5529

Sultan, Zahid and Tini, Nuhu H. and Moeinaddini, Mehdi (2016) Exploring the implementation and success of green urban mobility in Asian cities. Planning Malaysia, 4 (Specia). pp. 295-314. ISSN 1675-6215

Samah, N. A. and Yaacob, A. and Hussain, R. M. R. and Mohd. Yusoff, N. and Meng, N. Y. and Othman, R. and Abu Bakar, A. and Hin, L. C. (2016) Exploring the perception of Scholarship of Teaching and Learning (SOTL) among the academics of Malaysian higher education institutions: post training experiences. Man in India, 96 (1-2). pp. 433-446. ISSN 0025-1569

Mohamad Haafiz, M. K. and Hassan, A. and Arjmandi, R. and Marliana, M. M. and Nurul Fazita, M. R. (2016) Exploring the potentials of nanocellulose whiskers derived from oil palm empty fruit bunch on the development of polylactid acid based green nanocomposites. Polymers and Polymer Composites, 24 (9). pp. 729-734. ISSN 0967-3911

Ahmed, R. and Mohamad, N. A. (2016) Exploring the relationship between multi-dimensional top management support and project success: an international study. EMJ - Engineering Management Journal, 28 (1). pp. 54-67. ISSN 1042-9247

Munir, Y. and Ghafoor, M. M. and Rasli, A. M. (2016) Exploring the relationship of horizontal violence, organizational cynicism and turnover intention in the context of social exchange theory. International Journal of Human Rights in Healthcare, 9 (4). pp. 254-266. ISSN 2056-4902

Mohd. Tahir, Lokman and Yiin, Yong Sheih and Jafri, Hadijah and Abu Samah, Narina and Mohd. Yusof, Sanitah (2016) Exploring the role of the academics as leaders for learning in a public higher education institution. Man in India, 96 (1-2). pp. 279-301. ISSN 0025-1569

Abdul Rahman, N. S. and Othman, M. S. and Al-Rahmi, W. (2016) Exploring the use of social media tools among students for teaching and learning purpose. Journal of Theoretical and Applied Information Technology, 91 (1). pp. 49-60. ISSN 1992-8645

Woon, J. S. K. and Mackeen, M. M. and Mahadi, N. M. and Illias, R. M. and Abdul Murad, A. M. and Abu Bakar, F. D. (2016) Expression and characterization of a cellobiohydrolase (CBH7B) from the thermophilic fungus Thielavia terrestris in Pichia pastoris. Biotechnology and Applied Biochemistry, 63 (5). pp. 690-698. ISSN 0885-4513

Peter, Crystal Joan and Libunao, Wilfredo Herrera and Abdul Latif, Adibah (2016) Extent of education for sustainable development (ESD) integration in Malaysian community colleges. Journal of Technical Education and Training, 8 (1). pp. 1-13. ISSN 2229-8932

Subha, N. A. M. and Liu, G. P. (2016) External consensus in multi-agent systems with large consecutive data loss under unreliable networks. IET Control Theory and Applications, 10 (9). pp. 989-1000. ISSN 1751-8644

Subha, N. A. M. and Liu, G. P. (2016) External consensus in multi-agent systems with large consecutive data loss under unreliable networks. IET Control Theory and Applications, 10 (9). pp. 989-1000. ISSN 1751-8644

Abdul Aziz, Ahmad Fawwaz and Abdul Hamid, Mohd. Kameil (2016) External particle shape analysis and its effect on tribological performance of disc brake. Jurnal Teknologi, 78 (9). pp. 29-33. ISSN 0127-9696

Ahmad, K. A. and Abdullah, M. E. and Hassan, N. A. and Ambak, K. B. and Musbah, A. and Usman, N. and Bakar, S. K. B. A. (2016) Extraction techniques and industrial applications of jatropha curcas. Jurnal Teknologi, 78 (7-3). pp. 53-60. ISSN 0127-9696

Jamaluddin, M. S. and Azmi, N. F. M. (2016) Extraction transformation load (ETL) solution for data integration: a case study of rubber import and export information. Jurnal Teknologi, 78 (1). pp. 79-84. ISSN 0127-9696

Sajjadi, S. and Shamshirband, S. and Alizamir, M. and Yee, P. L. and Mansor, Z. and Manaf, A. A. and Altameem, T. A. and Mostafaeipour, A. (2016) Extreme learning machine for prediction of heat load in district heating systems. Energy and Buildings, 122 . pp. 222-227. ISSN 0378-7788

Maliha, Ayman and Yusof, Rubiyah and Shapiai, Mohd. Ibrahim (2016) Extreme learning machine for structured output spaces. Neural Computing and Applications . pp. 1-14. ISSN 0941-0643 (In Press)

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Extreme structural response values from various methods of simulating wave kinematics. Ships and Offshore Structures, 11 (4). pp. 369-384. ISSN 1744-5302

Zamani, H. and Abas, A. and M. Amin, M. K. (2016) Eye tracking application on emotion analysis for marketing strategy. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 87-91. ISSN 2180-1843

Zamani, Hadi and Mohd. Abas, Amalina and Mohammed Amin, Muhamad Kamal (2016) Eye tracking application on emotion analysis for marketing strategy. Journal of Telecommunication Electronic and Computer Engineering, 8 (11). pp. 87-91. ISSN 2180-1843

Ufere, Sharon Kalu Joseph and Sultana, Naznin (2016) Fabrication and characterization of chitosan coated and uncoated pcl/ha/ppy composite scaffoldsusing freeze drying technique. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14052-14055. ISSN 1819-6608

Moideen K., I. and Isloor, A. M. and Ismail, A. F. and Obaid, A. and Fun, H. K. (2016) Fabrication and characterization of new PSF/PPSU UF blend membrane for heavy metal rejection. Desalination and Water Treatment, 57 (42). pp. 19810-19819. ISSN 1944-3994

Ufere, S. K. J. and Sultana, N. (2016) Fabrication and characterization of pcl/ha/ppy composite scaffold using freeze-drying technique. Jurnal Teknologi, 78 (12). pp. 89-94. ISSN 0127-9696

Joseph Ufere, Sharon Kalu and Sultana, Naznin (2016) Fabrication and characterization of pcl/ha/ppy composite scaffold using freeze-drying technique. Jurnal Teknologi (Sciences and Technology), 78 (12). pp. 89-94. ISSN 21803722

Irfan, M. and Idris, A. and Nasiri, R. and Almaki, J. H. (2016) Fabrication and evaluation of polymeric membranes for blood dialysis treatments using functionalized MWCNT based nanocomposite and sulphonated-PES. RSC Advances, 6 (103). pp. 101513-101525. ISSN 2046-2069

Balaji, A. and Jaganathan, S. K. and Ismail, A. F. and Rajasekar, R. (2016) Fabrication and hemocompatibility assessment of novel polyurethane-based bio-nanofibrous dressing loaded with honey and Carica papaya extract for the management of burn injuries. International Journal of Nanomedicine, 11 . pp. 4339-4355. ISSN 1176-9114

Wahab, N. A. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Kamaruddin, S. and Ismail, N. I. N. and Choi, S. B. and Sharif, A. H. R. (2016) Fabrication and investigation on field-dependent properties of natural rubber based magneto-rheological elastomer isolator. Smart Materials and Structures, 25 (10). ISSN 0964-1726

Abidin, U. and Yunas, J. and Majlis, B. Y. (2016) Fabrication and testing of polydimethylsiloxane (PDMS) microchannel for lab-on-chip (LOC) magnetically-labelled biological cells separation. Jurnal Teknologi, 78 (8-4). pp. 73-80. ISSN 0127-9696

Ubaidillah, Ubaidillah and Choi, H. J. and Mazlan, S. A. and Imaduddin, F. and Harjana, Harjana (2016) Fabrication and viscoelastic characteristics of waste tire rubber based magnetorheological elastomer. Smart Materials and Structures, 25 (11). ISSN 0964-1726

Azhari, S. and Sathishkumar, P. and Ahamad, R. and Ahmad, F. and Yusoff, A. R. M. (2016) Fabrication of a composite modified glassy carbon electrode: a highly selective, sensitive and rapid electrochemical sensor for silver ion detection in river water samples. Analytical Methods, 8 (28). pp. 5712-5721. ISSN 1759-9660

Mohammad, S. M. and Hassan, Z. and Talib, R. A. and Ahmed, N. M. and Al-Azawi, M. A. and Abd-Alghafour, N. M. and Chin, C. W. and Al-Hardan, N. H. (2016) Fabrication of a highly flexible low-cost H2 gas sensor using ZnO nanorods grown on an ultra-thin nylon substrate. Journal of Materials Science: Materials in Electronics, 27 (9). pp. 9461-9469. ISSN 0957-4522

Abd. Mubin, M. H. and Roslan, M. S. and Rizvi, S. Z. H. and Chaudhary, K. and Daud, S. and Ali, J. and Munajat, Y. (2016) Fabrication of carbon thin films by pulsed laser deposition in different ambient environments. Jurnal Teknologi, 78 (3). pp. 235-240. ISSN 0127-9696

Rashid, N. M. and Kishi, N. and Soga, T. (2016) Fabrication of Fe2O3 nanoflakes-based electrochemical solar cells prepared by facile thermal oxidation. Modern Physics Letters B, 30 (15). ISSN 0217-9849

Othman, N. and Harruddin, N. and Idris, A. and Ooi, Z. Y. and Fatiha, N. and Raja Sulaiman, R. N. (2016) Fabrication of polypropylene membrane via thermally induced phase separation as a support matrix of tridodecylamine supported liquid membrane for Red 3BS dye removal. Desalination and Water Treatment, 57 (26). pp. 12287-12301. ISSN 1944-3994

Hajalilou, Abdollah and Mazlan, Saiful Amri and Abbasi, Mehrdad and Lavvafi, Hossein (2016) Fabrication of spherical cofe2o4 nanoparticles with a sol-gel and hydrothermal method and their magnetorheological characteristics. RSC Advances, 6 (92). pp. 89510-89522. ISSN 2046-2069

Bakhsheshi-Rad, H. R. and Hamzah, E. and Kasiri-Asgarani, M. and Jabbarzare, S. and Daroonparvar, M. and Najafinezhad, A. (2016) Fabrication, degradation behavior and cytotoxicity of nanostructured hardystonite and titania/hardystonite coatings on Mg alloys. Vacuum, 129 . pp. 9-12. ISSN 0042-207X

Muhammad, B. and Abu-Bakar, A. R. (2016) Face detection in profile views using fast discrete curvelet transform (FDCT) and support vector machine (SVM). International Journal on Smart Sensing and Intelligent Systems, 9 (1). pp. 108-123. ISSN 1178-5608

Al-Dheleai, Y. M. and Tasir, Z. (2016) Facebook to facilitate instructor roles in course-related online interaction: a pilot study. Journal of Theoretical and Applied Information Technology, 89 (2). pp. 343-351. ISSN 1992-8645

Alias, Rose Alinda and Nerda, Zura Zabidi and Ghazali, Saadiah and Mohd., Faizal Omar and Saniah Sulaiman, Nor Intan (2016) Facebook usage in promoting the academia expertise. Journal of Theoretical and Applied Information Technology, 89 (1). pp. 27-35. ISSN 1817-3195

Khan, M. M. and Ghani, I. and Jeong, S. R. and Ibrahim, R. and Qureshi, K. N. (2016) Facebook’s public social interaction utilization to assist recommendation across system domain. Journal of Theoretical and Applied Information Technology, 88 (3). pp. 392-397. ISSN 1992-8645

Abdul Wahab, R. and Basri, M. and Raja Abdul Rahman, R. N. Z. and Salleh, A. B. and Abdul Rahman, M. B. and Leow, T. C. (2016) Facile modulation of enantioselectivity of thermophilic Geobacillus zalihae lipase by regulating hydrophobicity of its Q114 oxyanion. Enzyme and Microbial Technology, 93-94 . pp. 174-181. ISSN 0141-0229

Firdaus, F. and Noor-e-Iram, Noor-e-Iram and Khan, M. S. and Baig, U. (2016) Facile synthesis, characterization and photocatalytic activity of band gap engineered cobalt selenide nanoparticles. Arabian Journal for Science and Engineering, 41 (6). pp. 2377-2384. ISSN 1319-8025

Sultan, Z. and Ngadiman, N. I. and Kadir, F. D. A. and Roslan, N. F. and Moeinaddini, M. (2016) Factor analysis of motorcycle crashes in Malaysia. Planning Malaysia, 4 (Specia). pp. 135-146. ISSN 1675-6215

Ghabban, Fahad and Selamat, Ali and Ibrahim, Roliana (2016) Factors affect scholarly publication productivity among academic staff at Taibah University. International Journal of Control Theory and Applications, 9 (30). pp. 185-194. ISSN 0974-5572

Thoo, A. C. and Radzi, N. F. M. and Merlinda, F. and Muharam, Muharam and Ho, P. H. (2016) Factors affecting football fans’ purchase intention toward sponsoring product—a conceptual model. Advanced Science Letters, 22 (12). pp. 4241-4244. ISSN 1936-6612

Chin, T. A. and Govindasamy, U. and Sulaiman, Z. and Tat, H. H. (2016) Factors affecting the consumers proneness to buy 99-ends products. Advanced Science Letters, 22 (12). pp. 3991-3994. ISSN 1936-6612

Ismail, A. and Dolah, R. and Miyagi, Z. (2016) Factors identification on optimization of ball placement tool for flip-chip- ball-grid-array product. Jurnal Teknologi, 78 (1). pp. 175-179. ISSN 0127-9696

Sinniah, Gobi Krishna and Shah, Muhammad Zaly and Vigar, Geoff (2016) Factors influences residential location selection preferences toward future neighborhood. Jurnal Teknologi, 78 (4). pp. 9-17. ISSN 0127-9696

Mohammed, F. and Ibrahim, O. and Ithnin, N. (2016) Factors influencing cloud computing adoption for e-government implementation in developing countries: instrument development. Journal of Systems and Information Technology, 18 (3). pp. 297-327. ISSN 1328-7265

Rahim, N. S. A. and Mustaqim, M. and Saidi, M. I. and Adrutdin, K. F. and Hasan, M. A. (2016) Factors that contribute towards motorcycle lane lack of usage in Butterworth Kulim expressway (BKE). Advanced Science Letters, 22 (5-6). pp. 1244-1247. ISSN 1936-6612

Gazem, N. and Rahman, A. A. and Saeed, F. (2016) Factors that facilitate systematic problems solving process in small and medium enterprises. Indian Journal of Science and Technology, 9 (34). pp. 1-8. ISSN 0974-6846

Mohamad Husny, Z. J. B. I. and Mohammed Hussein, M. Z. S. B. and Illyas Tan, M. I. B. (2016) Factors that influence the intention to adopt halal logistics services among Malaysian SMEs: formation of hypotheses and research model. Asian Social Science, 12 (7). pp. 151-158. ISSN 1911-2017

Khalil, M. A. and Ahmad, A. and Abdullah, T. A. T. and Al-Shanini, A. (2016) Failure analysis using functional model and Bayesian network. Chemical Product and Process Modeling, 11 (4). pp. 265-272. ISSN 2194-6159

Samadi, Masoud and Othman, Mohd. Fauzi and Talib, Muhamad Farihin (2016) Fast and robust stereo matching algorithm for obstacle detection in robotic vision systems. Jurnal Teknologi, 78 (6-13). pp. 129-136. ISSN 0127-9696

Sangawi, A. W. K. and Murid, A. H. M. and Wei, L. K. (2016) Fast computing of conformal mapping and its inverse of bounded multiply connected regions onto second, third and fourth categories of koebe’s canonical slit regions. Journal of Scientific Computing, 68 (3). pp. 1124-1141. ISSN 0885-7474

Ahmad Nazri, M. N. and Ismail, Z. H. and Yusof, R. (2016) Fault detection and diagnosis using cubature Kalman filter for nonlinear process systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 63-67. ISSN 2180-1843

Ahmad Nazri, Muhammad Naguib and Ismail, Zool Hilmi and Yusof, Rubiyah (2016) Fault detection and diagnosis using cubature kalman filter for nonlinear process systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 63-67. ISSN 2180-1843

Mirsaeidi, Sohrab and Mat Said, Dalila and Mustafa, Mohammad Wazir and Habibuddin, Mohammad Hafiz and Ghaffari, Kimia (2016) Fault location and isolation in micro-grids using a digital central protection unit. Renewable and Sustainable Energy Reviews, 56 . pp. 1-17. ISSN 1364-0321

Abdulhamid, Shafi’i Muhammad and Abd Latiff, Muhammad Shafie and Madni, Syed Hamid Hussain and Abdullahi, Mohammed (2016) Fault tolerance aware scheduling technique for cloud computing environment using dynamic clustering algorithm. Neural Computing and Applications . pp. 1-15. ISSN 0941-0643 (In Press)

Abd. Latip, Siti Fadilah and Husain, Abdul Rashid and Ahmad, Mohamad Noh and Mohamed, Zaharuddin (2016) Fault tolerant control for sensor fault of a single-link flexible manipulator system. Jurnal Teknologi, 78 (6-13). pp. 59-66. ISSN 0127-9696

Huang, Wei and Mohd. Samin, Pakharuddin and Tawi, Kamarul Baharin (2016) Feasibility investigation on novel concept of clutched train system to substitute for vehicular friction clutch. Journal of Advanced Mechanical Design, Systems and Manufacturing, 10 (1). ISSN 1881-3054

Manaf, N. A. and Aziz, M. N. C. and Ridzuan, D. S. and Mohamad Salim, M. I. and Wahab, A. A. and Lai, K. W. and Hum, Y. C. (2016) Feasibility of A-mode ultrasound attenuation as a monitoring method of local hyperthermia treatment. Medical and Biological Engineering and Computing, 54 (6). pp. 967-981. ISSN 0140-0118

Armaghani, Danial Jahed and Hasanipanah, Mahdi and Amnieh, Hassan Bakhshandeh and Mohamad, Edy Tonnizam (2016) Feasibility of ICA in approximating ground vibration resulting from mine blasting. Neural Computing and Applications . pp. 1-9. ISSN 0941-0643 (In Press)

Liew, W. L. and Kassim, M. A. and Muda, K. and Loh, S. K. (2016) Feasibility study on palm oil processing wastes towards achieving zero discharge. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2400-2405. ISSN 1819-6608

Obasa, Adekunle Isiaka and Salim, Naomie and Khan, Atif (2016) Feature analysis for web forum question post detection. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1818-1829. ISSN 1819-6608

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Mubin, M. and Saad, I. (2016) Feature selection using angle modulated simulated Kalman filter for peak classification of EEG signals. SpringerPlus, 5 (1). ISSN 2193-1801

Alhaj, T. A. and Siraj, M. M. and Zainal, A. and Elshoush, H. T. and Elhaj, F. (2016) Feature selection using information gain for improved structural-based alert correlation. PLoS ONE, 11 (11). ISSN 1932-6203

Kang, Tee Zhao and Mohammad, Siti Hajar and Abd. Murad, Abdul Munir and Md. Illias, Rosli and Md. Jahim, Jamaliah (2016) Fermentative production of xylitol: a first trial on xylose bifurcation. Indian Journal of Science and Technology, 9 (21). ISSN 0974-6846

Al-Ashwal, R. H. and Mohd. Nooh, Syed and Aourdjini, Ali and Ibrahim, Zameera and Abdulrahman, Hisyam and Aziz, Nadwa and Ravichandran Jeganathan, J. (2016) Fetal kicking monitoring device for intrauterine death prevention. Indian Journal of Science and Technology, 9 (13). ISSN 0974-6846

Abdullah, Mundzir and Bidin, Noriah and Krishnan, Ganesan and Ahmad, Mohd. Fakaruddin Sidi and Yasin, Moh (2016) Fiber optic radial displacement sensor-based a beam-through technique. IEEE Sensors Journal, 16 (2). pp. 306-311. ISSN 1530-437X

Daud, S. and Ahmad Noorden, A. F. (2016) Fibre bragg grating sensor system for temperature application. Jurnal Teknologi, 78 (3). pp. 39-42. ISSN 0127-9696

Teh, L. P. and Triwahyono, S. and Jalil, A. A. and Firmansyah, M. L. and Mamat, C. R. and Majid, Z. A. (2016) Fibrous silica mesoporous ZSM-5 for carbon monoxide methanation. Applied Catalysis A: General, 523 . pp. 200-208. ISSN 0926-860X

Dodo, Yakubu Aminu and Pontip, Stephen Nimlyat and Muhammed, Gambo Abdullahi and Kandar, Mohd.Zin (2016) A field study of thermal and visual performance of self-shading energy commission diamond building, Putrajaya, Malaysia. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Damiati, S. A. and Zaki, S. A. and Rijal, H. B. and Wonorahardjo, S. (2016) Field study on adaptive thermal comfort in office buildings in Malaysia, Indonesia, Singapore, and Japan during hot and humid season. Building and Environment, 109 . pp. 208-223. ISSN 0360-1323

Mohamad, N. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Choi, S. B. and Nordin, M. F. M. (2016) The Field-Dependent Rheological Properties of Magnetorheological Grease Based on Carbonyl-Iron-Particles. Smart Materials and Structures, 25 (9). ISSN 0964-1726

Thang, L. Y. and See, H. H. and Quirino, J. P. (2016) Field-enhanced sample injection-micelle to solvent stacking in nonaqueous capillary electrophoresis. Talanta, 161 . pp. 165-169. ISSN 0039-9140

Douglas, Muhammad Umbugala (2016) Finding the niche towards performance excellence: a study of facilities management firms in Malaysia. Journal of Facilities Management, 14 (4). pp. 330-349. ISSN 1472-5967

Gallegos-Arellano, E. and Vargas-Rodriguez, E. and Guzman-Chavez, A. D. and Cano-Contreras, M. and Cruz, J. L. and Raja-Ibrahim, R. K. (2016) Finely tunable laser based on a bulk silicon wafer for gas sensing applications. Laser Physics Letters, 13 (6). ISSN 1612-2011

Ahmad Radzi, S. and Khalil Hani, M. and Bakhteri, R. (2016) Finger-vein biometric identification using convolutional neural network. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (3). pp. 1863-1878. ISSN 1300-0632

Cheng, E. M. and Abbas, Z. and AbdulMalek, M. and Lee, K. Y. and You, K. Y. and Khor, S. F. and Hassan, J. and Zainuddin, H. (2016) Finite difference analysis of an open-ended, coaxial sensor made of semi-rigid coaxial cable for determination of moisture in tenera oil palm fruit. Applied Computational Electromagnetics Society Journal, 31 (10). pp. 1181-1192. ISSN 1054-4887

Mokhtar, Nor Izzah and Abu Hassan, Shukur and Ahmad, Yusof and Jamalud Din, Nor Ashiqeen and Omar, Balqis (2016) Finite element modeling of arcan testing method for ductile and brittle material under different loading configuration. Journal of Built Environment, Technology and Engineering, 1 (SEPT). pp. 289-298. ISSN 0128-1003

Ghazali, R. and Abdul Rahim, H. (2016) First derivative prediction of raw broiler shear force using visible short wave near infrared spectroscopy. Jurnal Teknologi, 78 (7-4). pp. 1-6. ISSN 0127-9696

Bencherif, K. and Yakoubi, A. and Della, N. and Miloud Abid, O. and Khachai, H. and Ahmed, R. and Khenata, R. and Bin Omran, S. and Gupta, S. K. and Murtaza, G. (2016) First Principles Investigation of the Elastic, Optoelectronic and Thermal Properties of XRuSb: (X = V, Nb, Ta) Semi-Heusler Compounds Using the mBJ Exchange Potential. Journal of Electronic Materials, 45 (7). pp. 3479-3490. ISSN 0361-5235

Masuri, N. S. and Ahmed, R. and Shaari, A. and Haq, B. U. and Mohamad, M. and Hussain, A. and Muhamad, M. N. (2016) First principles study of structural, electronic and optical properties of half-heusler alloys LIMGN, NaMGN and KMGN. Jurnal Teknologi, 78 (3). pp. 111-116. ISSN 0127-9696

Suhaimi, M. S. and Saat, A. and Wahid, M. A. and Mohd. Sies, M. (2016) Flame propagation and burning rates of methane-air mixtures using schlieren photography. Jurnal Teknologi, 78 (10-2). pp. 21-27. ISSN 0127-9696

Marliana, M. M. and Hassan, A. and Yuziah, M. Y. N. and Khalil, H. P. S. A. and Inuwa, I. M. and Syakir, M. I. and Haafiz, M. K. M. (2016) Flame retardancy, Thermal and mechanical properties of Kenaf fiber reinforced Unsaturated polyester/Phenolic composite. Fibers and Polymers, 17 (6). pp. 902-909. ISSN 1229-9197

Phoon, L. Y. and Hashim, H. and Mat, R. and Mustaffa, A. A. (2016) Flash point prediction of tailor-made green diesel blends containing B5 palm oil biodiesel and alcohol. Fuel, 175 . pp. 287-293. ISSN 0016-2361

Shah, M. K. K. and Sirat, H. M. and Jamil, S. and Jalil, J. (2016) Flavonoids from the bark of Artocarpus integer var. silvestris and their anti-inflammatory properties. Natural Product Communications, 11 (9). pp. 1275-1278. ISSN 1934-578X

Yasari, Abidulkarim K. I. and Latiff, Liza Abdul and Dziyaudin, Rudzidatul Akmam and Lilo, Moneer Ali and Aljeroudi, Yazan and Atee, Hayfaa A. (2016) Flexible online multi-objective optimization framework for ISA100.11a standard in beacon-enabled CSMA/CA mode. Computers and Electrical Engineering . ISSN 0045-7906 (In Press)

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Liang, Maybelle and Jaw, Siow Wei and Azimi, Mohammadamin (2016) Flexural capacity enhancement of rectangular high-strength concrete columns confined with post-tensioned steel straps: experimental investigation and analytical modelling. Structural Concrete, 17 (4). pp. 668-676. ISSN 1464-4177

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2016) Flexural ductility design of confined high-strength concrete columns: theoretical modelling. Measurement: Journal of the International Measurement Confederation, 78 . pp. 42-48. ISSN 0263-2241

Sani, M. S. H. M. and Kamal, M. M. and Muftah, F. and Tan, C. S. (2016) Flexural performance of built-up cold-formed steel beam filled with compacted soil. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9855-9862. ISSN 1819-6608

Jumain, M. and Ibrahim, Z. and Ismail, Z. and Samsudin, M. F. and Anuar, M. Z. T. and Harun, S. and Makhtar, M. R. and Rahman, M. S. A. (2016) Flood flow characteristics and bed load transport in non-vegetated compound straight channels. Jurnal Teknologi, 78 (9-4). pp. 1-8. ISSN 0127-9696

Anuar, A. R. S. and Said, M. F. M. and Shafie, N. A. M. and Aziz, A. A. and Nasution, H. (2016) Flow analysis of piston head geometry for direct injection spark ignition engine. Jurnal Teknologi, 78 (8-4). pp. 81-88. ISSN 0127-9696

Das, S. and Toh, H. T. and Abu, A. H. and Das, S. and Mondal, K. and Sarkar, A. (2016) Flow in straight through labyrinth seal: a comparison of fluid structure interaction effects. Jurnal Teknologi, 78 (1). pp. 131-137. ISSN 0127-9696

See, Phen Chiak and Fosso, Olav Bjarte and Wong, Kuan Yew and Molinas, Marta (2016) Flow-based forward capacity mechanism: an alternative to the regulated capacity remuneration mechanisms in electricity market with high RES penetration. IEEE Transactions on Sustainable Energy, 7 (2). pp. 830-840. ISSN 1949-3029

Ho, C. S. L. and Horiuchi, T. and Taniguchi, H. and Umetsu, A. and Hagisawa, K. and Iwaya, K. and Nakai, K. and Azmi, A. and Zulaziz, N. and Azhim, A. and Shinomiya, N. and Morimoto, Y. (2016) Fluorescence multispectral imaging-based diagnostic system for atherosclerosis. BioMedical Engineering Online, 15 (1). ISSN 1475-925X

Azmi, N. S. and Ahmad, R. and Ibrahim, R. (2016) Fluorescent light (FL), red LED and blue LED spectrums effects on in vitro shoots multiplication. Jurnal Teknologi, 78 (6-6). pp. 93-97. ISSN 0127-9696

Jumain, M. and Ibrahim, Z. and Ismail, Z. and Makhtar, M. R. and Rahman, M. S. A. and Miran, N. S. and Khairi, S. S. M. (2016) Fluvial processes in compound straight channels: a laboratory investigation. Jurnal Teknologi, 78 (7). pp. 141-148. ISSN 0127-9696

Jamshidi, D. and Hussin, N. (2016) Forecasting patronage factors of Islamic credit card as a new e-commerce banking service: an integration of TAM with perceived religiosity and trust. Journal of Islamic Marketing, 7 (4). pp. 378-404. ISSN 1759-0833

Fulazzaky, M. A. and Talaiekhozani, A. and Abd. Majid, M. Z. (2016) Formaldehyde removal mechanisms in a biotrickling filter reactor. Ecological Engineering, 90 . pp. 77-81. ISSN 0925-8574

Morshed, T. and Kai, Y. and Matsumura, R. and Park, J. H. and Chikita, H. and Sadoh, T. and Hashim, A. M. (2016) Formation of germanium (111) on graphene on insulator by rapid melting growth for novel germanium-on-insulator structure. Materials Letters, 168 . pp. 223-227. ISSN 0167-577X

Morshed, T. and Kai, Y. and Matsumura, R. and Park, J. H. and Chikita, H. and Sadoh, T. and Hashim, A. M. (2016) Formation of large-grain crystalline germanium on single layer graphene on insulator by rapid melting growth. Materials Letters, 178 . pp. 147-150. ISSN 0167-577X

Mohd. Rasidek, N. A. and Mad Nordin, M. F. and Shameli, K. (2016) Formulation and evaluation of semisolid jelly produced by Musa acuminata Colla (AAA Group) peels. Asian Pacific Journal of Tropical Biomedicine, 6 (1). pp. 55-59. ISSN 2221-1691

Azman, N. F. and Samion, S. and Rahim, E. A. (2016) Formulation of refined, bleached and deodorised palm stearin with zinc dialkyl-dithiophosphate additive and its tribological performance. Jurnal Teknologi, 78 (9-2). pp. 53-59. ISSN 0127-9696

Yusuf, Z. and Abdul Wahab, N. and Sahlan, S. (2016) Fouling control strategy for submerged membrane bioreactor filtration processes using aeration airflow, backwash, and relaxation: a review. Desalination and Water Treatment, 57 (38). pp. 17683-17695. ISSN 1944-3994

Yusuf, Z. and Wahab, N. A. (2016) Fouling effect on controller tuning in membrane bioreactor filtration process. Jurnal Teknologi, 78 (12). pp. 47-52. ISSN 0127-9696

Rohman, A. and Windarsih, A. and Riyanto, S. and Sudjadi, Sudjadi and Shuhel Ahmad, S. A. and Rosman, A. S. and Yusoff, F. M. (2016) Fourier transform infrared spectroscopy combined with multivariate calibrations for the authentication of avocado oil. International Journal of Food Properties, 19 (3). pp. 680-687. ISSN 1094-2912

Thiam Siow, L. and Fazalul Rahiman, M. H. and Rahim, R. A. and Abdul Majid, M. S. and Sayyidi Hamzah, S. and Mat Ali, N. A. and Ang Wei Neng, V. and Ishak, S. and Tan Wan Kiat, T. (2016) FPGA technology in process tomography. Jurnal Teknologi, 78 (7-4). pp. 123-129. ISSN 0127-9696

Lee, Yee Hui and Mohd. Hani, Mohamed Khalil and Marsono, Muhammad Nadzir (2016) An FPGA-based quantum computing emulation framework based on serial-parallel architecture. International Journal of Reconfigurable Computing, 2016 . pp. 1-18. ISSN 1687-7195

Tang, Jia Wei and Shaikh-Husin, Nasir and Sheikh, Usman Ullah and Marsono, Muhammad Nadzir (2016) FPGA-based real-time moving target detection system for unmanned aerial vehicle application. International Journal of Reconfigurable Computing, 2016 . ISSN 1687-7195

Chan, S. W. and Ismail, Z. and Sumintono, B. (2016) A framework for assessing high school students statistical reasoning. PLoS ONE, 11 (11). ISSN 1932-6203

Abd. Samat, Roslida and Chua, Fong Teng and Mohd. Mustakim, Nur Akmal Hayati and Anuar, Fatin Izzaidah and Sa'ad, Sariffuddin (2016) Framework for evaluating lateral resistance of diagrid with base column. Malaysian Journal of Civil Engineering, 28 (2). pp. 130-139. ISSN 18237843

Toh, S. Y. and Abdullah, N. S. and Miskon, S. and Rahman, A. A. and Habil, H. (2016) A framework of knowledge personalization in mobile learning. Journal of Theoretical and Applied Information Technology, 89 (1). pp. 104-114. ISSN 1992-8645

Jumaat, N. F. and Tasir, Z. (2016) A framework of metacognitive scaffolding in learning authoring system through Facebook. Journal of Educational Computing Research, 54 (5). pp. 619-659. ISSN 0735-6331

Gozali, L. and Masrom, M. and Zagloel, T. Y. M. and Habibah, Habibah and Haron, N. (2016) A framework of successful business incubators for indonesian public universities. International Journal of Technology, 7 (6). pp. 1086-1096. ISSN 2086-9614

Javed, S. and Viswanathan, K. K. and Aziz, Z. A. (2016) Free vibration analysis of composite cylindrical shells with non-uniform thickness walls. Steel and Composite Structures, 20 (5). pp. 1087-1102. ISSN 1229-9367

Javed, S. and Viswanathan, K. K. and Aziz, Z. A. and Prabakar, K. (2016) Free vibration of anti-symmetric angle-ply plates with variable thickness. Composite Structures, 137 . pp. 56-69. ISSN 0263-8223

Nurul Izyan, M. D. and Viswanathan, K. K. and Aziz, Z. A. and Prabakar, K. (2016) Free vibration of layered cylindrical shells filled with fluid. Applied Mathematics and Mechanics (English Edition), 37 (6). pp. 803-820. ISSN 0253-4827

Azmi, Aini Najwa and Nasien, Dewi and Abu Samah, Azurah (2016) Freeman chain code as representation in offline signature verification system. Jurnal Teknologi, 78 (8-2). pp. 89-94. ISSN 0127-9696

Ahmad, A. (2016) Frequency estimation for atrial fibrillation from human studies. Jurnal Teknologi, 78 (7-4). pp. 59-65. ISSN 0127-9696

Barau, A. S. and Said, I. (2016) From goodwill to good deals: FELDA land resettlement scheme and the ascendancy of the landless poor in Malaysia. Land Use Policy, 54 . pp. 423-431. ISSN 0264-8377

Lam, S. S. and Liew, R. K. and Lim, X. Y. and Ani, F. N. and Jusoh, A. (2016) Fruit waste as feedstock for recovery by pyrolysis technique. International Biodeterioration and Biodegradation, 113 . pp. 325-333. ISSN 0964-8305

Ahmed, M. N. and Abdullah, A. H. and Kaiwartya, O. (2016) FSM-F: finite state machine based framework for denial of service and intrusion detection in manet. PLoS ONE, 11 (6).

Mushtaq, Faisal and Mat, Ramli and Ani, Farid Nasir (2016) Fuel production from microwave assisted pyrolysis of coal with carbon surfaces. Energy Conversion and Management, 110 . pp. 142-153. ISSN 0196-8904

Khandelwal, Manoj and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Majid, Muhd Zaimi Abd. and Monjezi, Masoud (2016) Function finding for indirect determination of rock brittleness based on genetic programming and non-linear multiple regression models. Engineering with Computers . pp. 1-9. ISSN 0177-0667 (In Press)

Saranya, R. and Kumar, M. and Tamilarasan, R. and Ismail, A. F. and Arthanareeswaran, G. (2016) Functionalised activated carbon modified polyphenylsulfone composite membranes for adsorption enhanced phenol filtration. Journal of Chemical Technology and Biotechnology, 91 (3). pp. 748-761. ISSN 0268-2575

Almasi, D. and Sadeghi, M. and Lau, W. J. and Roozbahani, F. and Iqbal, N. (2016) Functionally graded polymeric materials: a brif review of current fabrication methods and introduction of a novel fabrication method. Materials Science and Engineering C, 64 . pp. 102-107. ISSN 0928-4931

Febriyanti, E. and Suendo, V. and Mukti, R. R. and Prasetyo, A. and Arifin, A. F. and Akbar, M. A. and Triwahyono, S. and Marsih, I. N. and Ismunandar, Ismunandar (2016) Further insight into the definite morphology and formation mechanism of mesoporous silica KCC-1. Langmuir, 32 (23). pp. 5802-5811. ISSN 0743-7463

Mohammad, J. and Quoquab, F. (2016) Furthering the thought on Islamic work ethic: how does it differ? Journal of Islamic Marketing, 7 (3). pp. 355-375. ISSN 1759-0833

Abdul Haq, R. H. and Wahab, M. S. and Wahid, M. U. (2016) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. Advanced Structured Materials, 61 . pp. 23-32. ISSN 1869-8433

Zolfagharian, Ali and Valipour, Peiman and Ghasemi, Seyed Ebrahim (2016) Fuzzy force learning controller of flexible wiper system. Neural Computing and Applications, 27 (2). pp. 483-493. ISSN 0941-0643

Cacha, L. A. and Parida, S. and Dehuri, S. and Cho, S. B. and Poznanski, R. R. (2016) A fuzzy integral method based on the ensemble of neural networks to analyze fMRI data for cognitive state classification across multiple subjects. Journal of Integrative Neuroscience, 15 (4). pp. 593-606. ISSN 0219-6352

Adiputra, D. and Ubaidillah, U. and Mazlan, S. A. and Zamzuri, H. and Abdul Rahman, M. A. (2016) Fuzzy logic control for ankle foot orthoses equipped with magnetorheological brake. Jurnal Teknologi, 78 (11). pp. 25-32. ISSN 0127-9696

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) A fuzzy logic controller to line starting performance synchronous motor for a crane system using vector control. Jurnal Teknologi, 78 (6-6). pp. 81-86. ISSN 0127-9696

Zhou, Kai Qing and Mohd. Zain, Azlan (2016) Fuzzy Petri nets and industrial applications: a review. Artificial Intelligence Review, 45 (4). pp. 405-446. ISSN 0269-2821

Umaru, A. M. and Latiff, M. S. A. and Coulibaly, Y. (2016) Fuzzy-based adaptive length burst assembly technique for loss reduction in optical burst switched networks. Advanced Science Letters, 22 (10). pp. 2681-2685. ISSN 1936-6612

Abubakar, Muhammad Umaru and Abd. Latiff, Muhammad Shafie and Coulibaly, Yahaya (2016) Fuzzy-based adaptive length burst assembly technique for loss reduction in optical burst switched networks. Advanced Science Letters, 22 (10). pp. 2681-2685. ISSN 1936-6612

Subramanian, A. P. and Jaganathan, S. K. and Mandal, M. and Supriyanto, E. and Muhamad, I. I. (2016) Gallic acid induced apoptotic events in HCT-15 colon cancer cells. World Journal of Gastroenterology, 22 (15). pp. 3952-3961. ISSN 1007-9327

Mohd. Khairi, M. T. and Ibrahim, S. and Md. Yunus, M. A. and Faramarzi, M. (2016) Gas bubbles investigation in contaminated water using optical tomography based on independent component analysis method. International Journal of Optics, 2016 . ISSN 1687-9384

Talebian-Kiakalaieh, A. and Amin, N. A. S. and Zakaria, Z. Y. (2016) Gas phase selective conversion of glycerol to acrolein over supported silicotungstic acid catalyst. Journal of Industrial and Engineering Chemistry, 34 . pp. 300-312. ISSN 1226-086X

Nyakuma, B. B. and Ahmad, A. and Johari, A. and Abdullah, T. A. T. and Oladokun, O. and Alkali, H. (2016) Gasification of oil palm empty fruit bunches (OPEFB) briquettes for bio-syngas production. Jurnal Teknologi, 78 (8-3). pp. 83-88. ISSN 0127-9696

Idris, Mardiana and Zakaria, Mohamad Hassan (2016) Gauging ESL learners CEFR ratings on oral proficiency in rater training. Man in India, 96 (6). pp. 1675-1682. ISSN 0025-1569

Idris, Mardiana and Zakaria, Mohamad Hassan (2016) Gauging ESL learners' CEFR ratings on oral proficiency in rater training. Man in India, 96 (6). pp. 1675-1682. ISSN 0025-1569

Hun, Lee Ting and Wani, Waseem A. and Poh, Heng Yong and Baig, Umair and Tan, Eddie Ti Tjih and Nashiruddin, Noor Idayu and Ling, Yong Ee and Abdul Aziz, Ramlan (2016) Gel electrophoretic and liquid chromatographic methods for the identification and authentication of cave and house edible birds nests from common adulterants. Analytical Methods, 8 (3). pp. 526-536. ISSN 1759-9660

Liew, Shan Sung and Mohd. Hani, Mohamed Khalil and Ahmad Radzi, Syafeeza and Bakhteri, Rabia (2016) Gender classication: a convolutional neural network approach. Turkish Journal of Electrical Engineering & Computer Sciences, 24 . pp. 1248-1264. ISSN 1300-0632

Liew, Shan Sung and Khalil-Hani, Mohamed and Ahmad Radzi, Syafeeza and Bakhteri, Rabia (2016) Gender classification: a convolutional neural network approach. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (3). pp. 1248-1264. ISSN 1300-0632

Suhaimi, Mohd. Azlan and Mat Ghani, Firdaus and Mohd. Taib, Jamaludin and Md. Tap, Masine (2016) Generalization of mathematical representation for tool path based on boundary representation (BREPS) data structure. Jurnal Teknologi, 78 (1). pp. 159-167. ISSN 0127-9696

Sharif, N. M. and Yusoff, N. M. and Mohd. Izhar, M. A. and Ahmad, F. and Harun, S. W. and Ahmad, H. (2016) Generation of Q-switched thulium-doped fiber laser (TDFL) using differentsaturable absorbers. Jurnal Teknologi, 78 (5-9). pp. 97-103. ISSN 0127-9696

Ahmad, H. and Salim, M. A. M. and Soltanian, M. R. K. and Azzuhri, S. R. and Harun, S. W. and Yasin, M. (2016) Generation of stable and narrow spacing dual-wavelength ytterbium-doped fiber laser using a photonic crystal fiber. Journal of Modern Optics, 63 (10). pp. 968-973. ISSN 0950-0340

Al-Dhaqm, Arafat and Abd. Razak, Shukor and Othman, Siti Hajar and Nagdi, Asri and Ali, Abdulalem (2016) A generic database forensic investigation process model. Jurnal Teknologi, 78 (6-11). pp. 45-57. ISSN 0127=9696

Abd. Zolkifli, Mohd. Hamid and Kamin, Yusri and Abdul Latib, Azlan and Buntat, Yahya and Awang, Zubaidah (2016) Generic green skills: industry and perspectives on technical education and vocational training (TVET). The Online Journal for Technical and Vocational Education and Training in Asia (6). ISSN 2196-838X

Adilah Amrannudin, N. and Hamsidi, M. and Ismail, N. A. and Ismail, R. and Dom, N. C. and Ahmad, A. H. and Mastuki, M. F. and Basri, T. S. A. T. A. and Khalid, A. and Muslim, M. and Daud, N. A. A. and Camalxaman, S. N. (2016) Genetic polymorphism of aedes albopictus population inferred from ND5 gene variabilities in Subang Jaya, Malaysia. Journal of the American Mosquito Control Association, 32 (4). pp. 265-272. ISSN 8756-971X

Shirani Faradonbeh, R. and Monjezi, M. and Jahed Armaghani, D. (2016) Genetic programing and non-linear multiple regression techniques to predict backbreak in blasting operation. Engineering with Computers, 32 (1). pp. 123-133. ISSN 0177-0667

Faradonbeh, R. S. and Armaghani, D. J. and Monjezi, M. and Mohamad, E. T. (2016) Genetic programming and gene expression programming for flyrock assessment due to mine blasting. International Journal of Rock Mechanics and Mining Sciences, 88 . pp. 254-264. ISSN 1365-1609

Goh, K. M. and Chan, K. G. and Lim, S. W. and Liew, K. J. and Chan, C. S. and Shamsir, M. S. and Ee, R. and Adrian, T. G. S. (2016) Genome analysis of a new Rhodothermaceae strain isolated from a hot spring. Frontiers in Microbiology, 7 (JUL). ISSN 1664-302X

Selvaratnam, C. and Thevarajoo, S. and Ee, R. and Chan, K. G. and Bennett, J. P. and Goh, K. M. and Chong, C. S. (2016) Genome sequence of Roseivirga sp. strain D-25 and its potential applications from the genomic aspect. Marine Genomics, 28 . pp. 29-31. ISSN 1874-7787

Murlidhar, B. R. and Mohamad, E. T. and Alel, M. N. A. B. and Armaghani, D. J. (2016) Geological study and mining plan importance for mitigating alkali silica reaction in aggregate quarry operation. Jurnal Teknologi, 78 (7-3). pp. 71-79. ISSN 0127-9696

Cheng, E. M. and Abbas, Z. and AbdulMalek, M. and Lee, K. Y. and You, K. Y. and Khor, S. F. and Afendi, M. (2016) Geometrical optics based path loss model for furnished indoor environment. Applied Computational Electromagnetics Society Journal, 31 (9). pp. 1125-1134. ISSN 1054-4887

Nozibul Haque, M. and Shahid, S. and Keramat, M. and Mohsenipour, M. (2016) GIS integration of hydrogeological and geoelectrical data for groundwater potential modeling in the western part of greater Kushtia district of Bangladesh. Water Resources, 43 (2). pp. 283-291. ISSN 0097-8078

Mohd. Yunus, M. Z. and Ahmad, Fatimah Shafinaz (2016) GIS technology as a tools to predict landslide. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2581-2586. ISSN 1819-6608

Mohd. Yunus, Mohd. Zulkifli and Omar, C. M. and Ismail, Zulhilmi (2016) GIS-Based assessment of mangrove response to shoreline change along the Coast of Kukup Island, Johor. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3747-3754. ISSN 1819-6608

Al-Abadi, Alaa M. and Shahid, Shamsuddin and Al-Ali, Ali K. (2016) A GIS-based integration of catastrophe theory and analytical hierarchy process for mapping flood susceptibility: a case study of Teeb area, Southern Iraq. Environmental Earth Sciences, 75 (8). ISSN 1866-6280

Abdullahi, I. and Ahmad, R. (2016) Global convergence analysis of a nonlinear conjugate gradient method for unconstrained optimization problems. Indian Journal of Science and Technology, 9 (41). ISSN 0974-6846

Zainal, N. and Zain, A. M. and Radzi, N. H. M. and Othman, M. R. (2016) Glowworm swarm optimization (GSO) for optimization of machining parameters. Journal of Intelligent Manufacturing, 27 (4). pp. 797-804. ISSN 0956-5515

Abd. Rahim, I. M. and Abdul Rahim, H. and Ghazali, R. and Ismail, R. and Omar, J. (2016) Glucose detection in blood using near-infrared spectroscopy: significant wavelength for glucose detection. Jurnal Teknologi, 78 (7-4). pp. 85-91. ISSN 0127-9696

Thiele, M. and Soh, J. Z. E. and Knauer, A. and Malsch, D. and Stranik, O. and Müller, R. and Csáki, A. and Henkel, T. and Köhler, J. M. and Fritzsche, W. (2016) Gold nanocubes - Direct comparison of synthesis approaches reveals the need for a microfluidic synthesis setup for a high reproducibility. Chemical Engineering Journal, 288 . pp. 432-440. ISSN 1385-8947

Naz, G. and Othaman, Z. and Shamsuddin, M. and Krishna Ghoshal, S. (2016) Gold nanorod libraries enhancement for optical imaging. Materials Letters, 166 . pp. 63-66. ISSN 0167-577X

Mustapha, I. B. and Hasan, S. and Shamsuddin, S. M. and Lopes, N. and Leng, W. Y. (2016) GPU-based multiple back propagation for big data problems. International Journal of Advances in Soft Computing and its Applications, 8 (1). pp. 82-93. ISSN 2074-8523

Ismail, Babajide Mustapha and Hasan, Shafaatunnur and Shamsuddin, Siti Mariyam and Lopes, Noel and Nur Eiliyah @ Wong Yee Leng, Nur Eiliyah @ Wong Yee Leng (2016) GPU-based multiple back propagation for big data problems. International Journal of Advances in Soft Computing and its Applications, 8 (1). pp. 82-93. ISSN 2074-8523

Abbasi, Hossein and Mohd Daud, Salwani and Amir Sjarif, Nilam Nur and Abbasi, Morteza and Adam, Mohamad Zulkefli and Yuhaniz, Siti Sophiayati (2016) Gradual color clustering elimination for outdoor image segmentation. Opoijien International Journal of Informatics Oiji, 4 (1). pp. 25-31. ISSN 2289-2370

Akhtar, J. and Imran, M. and Zahoor, M. K. and Amin, N. S. (2016) Granular activated carbon assisted ozonation of cephalexin antibiotic. Journal of the Chemical Society of Pakistan, 38 (6). pp. 1056-1063. ISSN 0253-5106

Ameen, O. F. and Younus, M. H. and Aziz, M. S. and Azmi, A. I. and Raja Ibrahim, R. K. and Ghoshal, S. K. (2016) Graphene diaphragm integrated FBG sensors for simultaneous measurement of water level and temperature. Sensors and Actuators, A: Physical, 252 . pp. 225-232. ISSN 0924-4247

Meshginqalam, B. and Toloue, H. and Ahmadi, M. T. and Sabatyan, A. and Centeno, A. and Ismail, R. (2016) Graphene embedded surface plasmon resonance based sensor prediction model. Optical and Quantum Electronics, 48 (6). ISSN 0306-8919

Lai, G. S. and Lau, W. J. and Goh, P. S. and Ismail, A. F. and Yusof, N. and Tan, Y. H. (2016) Graphene oxide incorporated thin film nanocomposite nanofiltration membrane for enhanced salt removal performance. Desalination, 387 . pp. 14-24. ISSN 0011-9164

Zahri, K. and Wong, K. C. and Goh, P. S. and Ismail, A. F. (2016) Graphene oxide/polysulfone hollow fiber mixed matrix membranes for gas separation. RSC Advances, 6 (92). pp. 89130-89139. ISSN 2046-2069

Ahmad, S. I. and Hashim, H. and Hassim, M. H. (2016) A graphical method for assessing inherent safety during research and development phase of process design. Journal of Loss Prevention in the Process Industries, 42 . pp. 59-69. ISSN 0950-4230

Aliman, Mohamad Nizam and Abas, Khairul Hamimah and Najib, Muhammad Sharfi and Ab. Aziz, Nor Azlina and Mohamad, Mohd. Saberi and Ibrahim, Zuwairie (2016) Gravitational search algorithm: R is better than R2? ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4904-4910. ISSN 1819-6608

Abdullah, M. S. and Sarijari, M. A. and Hamid, A. H. F. A. and Fisal, N. and Lo, A. and Rashid, R. A. and Yusof, S. K. S. (2016) Green architecture for dense home area networks based on radio-over-fiber with data aggregation approach. Journal of Electronic Science and Technology, 14 (2). pp. 133-144. ISSN 1674-862X

Dwaikat, Luay N. and Ali, Kherun N. (2016) Green buildings cost premium: a review of empirical evidence. Energy and Buildings, 110 . pp. 396-403. ISSN 0378-7788

Abdul Latiff, Nurul Mu'azzah and Nik Abd. Malik, Nik Noordini and Abdul Latiff, Abdul Halim (2016) A green clustering protocol for mobile sensor network using particle swarm optimization. Journal of Electronic Science and Technology, 14 (2). pp. 160-169. ISSN 1674-862X

Firmawan, Ferry and Othman, Fadil and Yahya, Khairulzan and Haron, Zaiton (2016) The green construction site index (GCSI): a quantitative tool used to assess an ongoing project to meet the green construction concept. International Journal of Technology, 7 (4). pp. 530-543. ISSN 2086-9614

Sadrolhosseini, A. R. and Abdul Rashid, S. and Zakaria, A. and Shameli, K. (2016) Green fabrication of copper nanoparticles dispersed in walnut oil using laser ablation technique. Journal of Nanomaterials, 2016 . ISSN 1687-4110

Darwish, Tasneem and Abu Bakar, Kamalrulnizam and Hashim, Ahlam (2016) Green geographical routing in vehicular ad hoc networks: advances and challenges. Computers and Electrical Engineering . ISSN 0045-7906 (In Press)

Abdullah, Rozelin and Mat Daud, M. S. and Ahmad, Fauziah and Shukti, A. A. and Shah, Muhammad Zaly (2016) Green logistics adoption among 3PL companies. International Journal of Supply Chain Management, 5 (3). pp. 82-85. ISSN 2051-3771

Xin Lee, K. and Shameli, K. and Miyake, M. and Kuwano, N. and Ahmad Khairudin, N. B. and Mohamad, S. E. and Yew, Y. P. (2016) Green synthesis of gold nanoparticles using aqueous extract of Garcinia mangostana fruit peels. Journal of Nanomaterials, 2016 . ISSN 1687-4110

Yew, Y. P. and Shameli, K. and Miyake, M. and Kuwano, N. and Bt Ahmad Khairudin, N. B. and Bt Mohamad, S. E. and Lee, K. X. (2016) Green synthesis of magnetite (Fe3O4) nanoparticles using seaweed (Kappaphycus alvarezii) extract. Nanoscale Research Letters, 11 (1). ISSN 1931-7573

Pirmang, L. and Dahlan, N. Y. and Ahmad, N. H. and Mohamad, H. (2016) Greenhouse gases calculator (GHGCaL) for carbon footprint. International Journal of Simulation: Systems, Science and Technology, 17 (41). 56.1-56.6. ISSN 1473-8031

Sultana, U. and Khairuddin, A. B. and Mokhtar, A. S. and Zareen, N. and Sultana, B. (2016) Grey wolf optimizer based placement and sizing of multiple distributed generation in the distribution system. Energy, 111 . pp. 525-536. ISSN 0360-5442

Lau, K. Y. and Muhamad, N. A. and Arief, Y. Z. and Tan, C. W. and Yatim, A. H. M. (2016) Grid-connected photovoltaic systems for Malaysian residential sector: effects of component costs, feed-in tariffs, and carbon taxes. Energy, 102 . pp. 65-82. ISSN 0360-5442

Nordin, I. N. A. M. and Faudzi, A. A. M. and Kamarudin, M. Z. and Dewi, D. E. O. and Rehman, T. and Razif, M. R. M. (2016) Grip force measurement of soft- Actuated finger exoskeleton. Jurnal Teknologi, 78 (6-13). pp. 25-30. ISSN 0127-9696

Sabapathy, T. and Jusoh, M. and Ahmad, R. B. and Kamarudin, M. R. and Soh, P. J. (2016) A ground-plane-truncated, broadly steerable yagi-uda patch array antenna. IEEE Antennas and Wireless Propagation Letters, 15 . pp. 1069-1072. ISSN 1536-1225

Samiran, N. A. and Ng, J. H. and Mohd. Jaafar, M. N. and Valera-Medina, A. and Chong, C. T. (2016) H2-rich syngas strategy to reduce NOx and CO emissions and improve stability limits under premixed swirl combustion mode. International Journal of Hydrogen Energy, 41 (42). pp. 19243-19255. ISSN 0360-3199

Nor Liyana, M. and Othman, Z. and Abd. Wahid, R. and Azizul Hakimie, A. (2016) Habitat suitability prediction model of wildlife at Royal Belum State Park using geographical information system. International Journal of Geoinformatics, 12 (2). pp. 1-8. ISSN 1686-6576

Awang, Ramli and Ebrahimi, Mansoureh and Yusoff, Kamaruzaman and Abdullah, Berhanuddin (2016) Haji and Lebai from the perspective of master Syeikh Abdul Qadir al-Mandili al-Indonesi (1910-1965). Social Sciences (Pakistan), 11 (23). pp. 5541-5545. ISSN 1818-5800

Abdul Majid, Hairudin and A. Samah, Azurah and Mi Yusuf, Lizawati and Nasien, Dewi and Nor Hisham, Nor Shazwan Shah (2016) HAJJRAH: an innovative application for pilgrims of Hajj and Umrah. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1947-1950. ISSN 1819-6608

El Amine Monir, M. and Baltache, H. and Khenata, R. and Murtaza, G. and Ahmed, R. and Ahmed, W. K. and Bin Omran, S. and Bouhemadou, A. (2016) Half-metallicity and optoelectronic properties of V-doped zincblende ZnS and CdS alloys. International Journal of Modern Physics B, 30 (8). ISSN 0217-9792

Daud, S. and Amiri, I. S. and Ali, J. (2016) Half-panda ring resonator used to generate 100 MHZ repetition rate femtosecond soliton. Jurnal Teknologi, 78 (3). pp. 179-183. ISSN 0127-9696

Mohd. Zin, A.A. and Naderipour, A. and Hafiz Habibuddin, M. and Guerrero, J.M. (2016) Harmonic currents compensator GCI at the microgrid. Electronics Letters, 52 (20). pp. 1714-1715. ISSN 0013-5194

Mohamed, Sofiah and Jasmi, Kamarul Azmi and Md. Sawari, Siti Salwa and Abdullah, Mohd. Nasri and Ramli, Ruhiyati and Mohd. Yunus, Fazlulaini (2016) Harnessing the potential of pre-school pupils through religious education teaching and learning. The Social Sciences, 11 (12). pp. 2995-3000. ISSN 1818-5800

Rahim, F. L. M. and Hassim, M. H. and Mokhtar, M. M. and Kidam, K. (2016) Health risk assessment due to emissions from medical waste incinerator in Malaysia. Jurnal Teknologi, 78 (8-3). pp. 109-115. ISSN 0127-9696

Nasher, E. and Heng, L. Y. and Zakaria, Z. and Surif, S. (2016) Health risk assessment of polycyclic aromatic hydrocarbons through aquaculture fish consumption, Malaysia. Environmental Forensics, 17 (1). pp. 97-106. ISSN 1527-5922

Hussain, Hadrina Sh and Mohamad, Mohd. Murtadha and Ting, Chee Ming and Raja Zahilah, Raja Zahilah and Hussain, H. (2016) Heart sound monitoring sys. ARPN Journal of Engineering and Applied Sciences, 11 (7). pp. 4748-4755. ISSN 1819-6608

Lai, J. C. and Hassan, A. and Hasan, M. and Ani, F. N. and Tanjung, F. A. (2016) Heat distortion temperature and mechanical properties of agricultural wastes-reinforced phenolic composites. Journal of Polymer Engineering, 36 (6). pp. 641-647. ISSN 0334-6447

Liew, Peng Yen and Timothy, G. Walmsley (2016) Heat pump integration for total site waste heat recovery. Chemical Engineering Transactions, 52 . pp. 817-822. ISSN 2283-9216

Sadeghi, Omidreza and Mohammed, Hussein A. and Bakhtiari-Nejad, Marjan and Wahid, Mazlan Abdul (2016) Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts. International Communications in Heat and Mass Transfer, 71 . pp. 234-244. ISSN 0735-1933

Khalid, A. and Khan, I. and Shafie, S. (2016) Heat transfer in ferrofluid with cylindrical shape nanoparticles past a vertical plate with ramped wall temperature embedded in a porous medium. Journal of Molecular Liquids, 221 . pp. 1175-1183. ISSN 0167-7322

Azmin, S. N. H. M. and Manan, Z. A. and Alwi, S. R. W. and Chua, L. S. and Mustaffa, A. A. and Yunus, N. A. (2016) Herbal processing and extraction technologies. Separation and Purification Reviews, 45 (4). pp. 305-320. ISSN 1542-2119

Kalantari, Katayoon and Afifi, Amalina Muhammad and Bayat, Saadi and Shameli, Kamyar and Yousefi, Samira and Mokhtar, Norrashidah and Kalantari, Alireza (2016) Heterogeneous catalysis in 4-nitrophenol degradation and antioxidant activities of silver nanoparticles embedded in tapioca starch. Arabian Journal of Chemistry . ISSN 1878-5352 (In Press)

Zamberi, M. M. and Ani, F. N. and Abdollah, M. F. (2016) Heterogeneous transesterification of rubber seed oil biodiesel production. Jurnal Teknologi, 78 (6-10). pp. 105-110. ISSN 0127-9696

Moradihamedani, P. and Kalantari, K. and Abdullah, A. H. and Morad, N. A. (2016) High efficient removal of lead(II) and nickel(II) from aqueous solution by novel polysulfone/Fe3O4–talc nanocomposite mixed matrix membrane. Desalination and Water Treatment, 57 (59). pp. 28900-28909. ISSN 1944-3994

Logendran, V. and Jusoh, M. and Sabapathy, T. and Kamarudin, M. R. and Shakhirul, M. S. and Rahim, H. A. and Malek, M. F. (2016) A high gain pifa at 2.45 GHz and 5.8 GHz using wireless power transfer techniques for pacemaker application. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6210-6215. ISSN 1819-6608

Tasnim, R. and Baroto, M. B. and Singh, H. and Sufi, R. A. and Husin, M. M. and Singh, S. S. J. (2016) High impact entrepreneurship and sustainability-as-flourishing from our deep seas: Malaysia’s OTEC entrepreneurial blueprint. Advanced Science Letters, 22 (12). pp. 4469-4472. ISSN 1936-6612

Jannati, M. and Sutikno, T. and Idris, N. R. N. and Aziz, M. J. A. (2016) High performance speed control of single-phase induction motors using switching forward and backward EKF strategy. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 17-27. ISSN 2088-8694

Jannati, Mohammad and Sutikno, Tole and Nik Idris, Nik Rumzi and Abdul Aziz, Mohd. Junaidi (2016) High performance vector control of 3-phase im drives under open-phase fault based on EKF for rotor flux estimation. International Journal of Electrical and Computer Engineering, 6 (2). pp. 458-467. ISSN 2088-8708

Saman, N. and Johari, K. and Song, S. T. and Kong, H. and Cheu, S. C. and Mat, H. (2016) High removal efficiency of Hg(II) and MeHg(II) from aqueous solution by coconut pith - Equilibrium, kinetic and mechanism analyses. Journal of Environmental Chemical Engineering, 4 (2). pp. 2487-2499. ISSN 2213-3437

Saidi, M. M. and Alias, N. (2016) High speed computing of ice thickness equation for ice sheet model. Jurnal Teknologi, 78 (8-2). pp. 143-149. ISSN 0127-9696

Abdullah, M. E. and Zamhari, K. A. and Hainin, M. R. and Oluwasola, E. A. and Md. Yusoff, N. I. and Hassan, N. A. (2016) High temperature characteristics of warm mix asphalt mixtures with nanoclay and chemical warm mix asphalt modified binders. Journal of Cleaner Production, 122 . pp. 326-334. ISSN 0959-6526

Wan Azelee, N. I. and Jahim, J. M. and Ismail, A. F. and Fuzi, S. F. Z. M. and Rahman, R. A. and Md Illias, R. (2016) High xylooligosaccharides (XOS) production from pretreated kenaf stem by enzyme mixture hydrolysis. Industrial Crops and Products, 81 . pp. 11-19. ISSN 0926-6690

Algamal, Z. Y. and Lee, M. H. and Al-Fakih, A. M. and Aziz, M. (2016) High-dimensional QSAR modelling using penalized linear regression model with L1/2-norm. SAR and QSAR in Environmental Research, 27 (9). pp. 703-719. ISSN 1062-936X

Algamal, Zakariya Yahya and Lee, Muhammad Hisyam and Al-Fakih, Abdo Mohammed (2016) High-dimensional quantitative structure-activity relationship modeling of influenza neuraminidase a/PR/8/34 (H1N1) inhibitors based on a two-stage adaptive penalized rank regression. Journal of Chemometrics, 30 (2). pp. 50-57. ISSN 0886-9383

Ab. Razak, M. Z. and Saleh, Z. S. and Ahmad, F. and Anyi, C. L. and Harun, S. W. and Arof, H. (2016) High-power Q-switched erbium-ytterbium codoped fiber laser using multiwalled carbon nanotubes saturable absorber. Optical Engineering, 55 (10). ISSN 0091-3286

Haghshenas, Hanif (2016) Higher education consumer choice. Journal of Marketing for Higher Education . pp. 1-3. ISSN 0884-1241 (In Press)

Zainal, N. D. and Nur, H. and Ling Lee, S. (2016) Highly homogeneous nitrogen doped titania nanomaterials: Synthesis and characterization. Jurnal Teknologi, 78 (6-12). pp. 117-120. ISSN 0127-9696

Noah, N. F. M. and Othman, N. and Jusoh, N. (2016) Highly selective transport of palladium from electroplating wastewater using emulsion liquid membrane process. Journal of the Taiwan Institute of Chemical Engineers, 64 . pp. 134-141. ISSN 1876-1070

Ahmad, Harith and Mat Salim, Muhammad Aizi and Azzuhri, Saaidal Razalli and Harun, Sulaiman Wadi (2016) Highly stable and tunable narrow-spacing dual-wavelength ytterbium-doped fiber using a microfiber Mach-Zehnder interferometer. Optical Engineering, 55 (2). ISSN 0091-3286

Ahmed Shourav, Md. Sabbir and Mohsenipour, Morteza and Alamgir, Mahiuddin and Pour, Sahar Hadi and Ismail, Tarmizi (2016) Historical trends and future projection of climate at Dhaka city of Bangladesh. Jurnal Teknologi, 78 (6-12). pp. 69-75. ISSN 0127-9696

Kafuku, J. M. and Saman, M. Z. M. and Yusof, S. M. and Mahmood, S. (2016) A holistic framework for evaluation and selection of remanufacturing operations: an approach. International Journal of Advanced Manufacturing Technology, 87 (5-8). pp. 1571-1584. ISSN 0268-3768

Baharin, N. F. and Sidek, N. and Musa, S. M. A. and Azmi, A. I. and Abdullah, A. S. and Noor, M. Y. M. and Roslan, M. E. M. (2016) Hollow-core photonic crystal fiber refractive index sensor based on modal interference. ARPN Journal of Engineering and Applied Sciences, 11 (9). pp. 5702-5706. ISSN 1819-6608

Binte Batri, Nek Mah and Mohd. Yusof, Farahwahida and Muhamad, Siti Norlina and Hassan, Ahmad Muhyuddin and Ripin, Mohd. Nasir and Haron, Zulkiflee (2016) Homoseksual: antara hukum dan kemajuan sains. Sains Humanika, 8 (4). pp. 45-54. ISSN 2289-6996

Ghafouri, Mehdi and Khan, Tareef Hayat and Ahmad, Abdullah Sani (2016) How significant is durability in vernacular house construction? Jurnal Teknologi, 78 (9). pp. 113-122. ISSN 0127-9696

Kelana, B. W. Y. and Mansor, N. N. A. and Sanny, L. (2016) HR sustainability practices instrument comparative analysis in Malaysian SMEs. Pertanika Journal of Social Sciences and Humanities, 24 (July). pp. 73-80. ISSN 0128-7702

Ahmad, Abd. Razak and Mohd. Osman, Mohd. Hassan and Ismail, Kamariah and Wan Yusoff, Wan Fauziah (2016) The human capital and opportunity discovery on exploiting entrepreneurial opportunity among rural entrepreneurs. Jurnal Pengurusan, 46 . ISSN 0127-2713

Noaman, Redwan A. K. and Mohd. Ali, Mohd. Alauddin and Zainal, Nasharuddin and Saeed, Faisal (2016) Human detection framework for automated surveillance systems. International Journal of Electrical and Computer Engineering, 6 (2). pp. 877-886. ISSN 2088-8708

Hematian, A. and Yang, Y. and Lu, C. and Yazdani, S. (2016) Human motion analysis and classification using radar micro-doppler signatures. Studies in Computational Intelligence, 654 . pp. 1-10. ISSN 1860-949X

Daud, M. S. M. and Hussein, M. Z. S. M. and Nasir, M. E. and Abdullah, R. and Kassim, R. and Suliman, M. S. and Saludin, M. R. (2016) Humanitarian logistics and its challenges: the literature review. International Journal of Supply Chain Management, 5 (3). pp. 107-110. ISSN 2051-3771

Hui, Kar Hoou and Ooi, Ching Sheng and Lim, Meng Hee and Leong, M. Salman (2016) A hybrid artificial neural network with dempster-shafer theory for automated bearing fault diagnosis. Journal of Vibroengineering, 18 (7). pp. 4409-4418. ISSN 1392-8716

Hui, K. H. and Ooi, C. S. and Lim, M. H. and Leong, M. S. (2016) A hybrid artificial neural network with dempster-shafer theory for automated bearing fault diagnosis. Journal of Vibroengineering, 18 (7). pp. 4409-4418. ISSN 1392-8716

Zuhair, H. and Salleh, M. and Selama, A. (2016) Hybrid features-based prediction for novel phish websites. Jurnal Teknologi, 78 (12-3). pp. 95-109. ISSN 0127-9696

Mahrami, M. and Rahmani, R. and Seyedmahmoudian, M. and Mashayekhi, R. and Karimi, H. and Hosseini, E. (2016) A hybrid metaheuritic technique developed for hourly load forecasting. Complexity, 21 . pp. 521-532. ISSN 1076-2787

Aslahi-Shahri, B. M. and Rahmani, R. and Chizari, M. and Maralani, A. and Eslami, M. and Golkar, M. J. and Ebrahimi, A. (2016) A hybrid method consisting of GA and SVM for intrusion detection system. Neural Computing and Applications, 27 (6). pp. 1669-1676. ISSN 0941-0643

Sadaei, H. J. and Enayatifar, R. and Lee, M. H. and Mahmud, M. (2016) A hybrid model based on differential fuzzy logic relationships and imperialist competitive algorithm for stock market forecasting. Applied Soft Computing Journal, 40 . pp. 132-149. ISSN 1568-4946

Azhar, Amira Husna and Tan Ah Chik @ Mohamad, Mohd Saberi and Deris, Safaai and Napis, Suhaimi and Sinnott, Richard (2016) A hybrid of ant colony optimization and flux variability analysis to improve the production of l-phenylalanine and biohydrogen. International Journal of Advances in Soft Computing and Its Applications, 8 (2). pp. 161-180. ISSN 2074-8523

A. Yayah, Abdulsalam Salam and Coulibaly, Yahaya and Ismail, Abdul Samad and Rouskas, George N. (2016) Hybrid offset-time and burst assembly algorithm (H-OTBA) for delay sensitive applications over optical burst switching networks. International Journal of Communication Systems, 29 (2). pp. 251-261. ISSN 1074-5351

Elfghi, F. M. (2016) A hybrid statistical approach for modeling and optimization of RON: a comparative study and combined application of response surface methodology (RSM) and artificial neural network (ANN) based on design of experiment (DOE). Chemical Engineering Research and Design, 113 . pp. 264-272. ISSN 0263-8762

Tan, W. S. and Shaaban, M. (2016) A hybrid stochastic/deterministic unit commitment based on projected disjunctive MILP reformulation. IEEE Transactions on Power Systems, 31 (6). pp. 5200-5201. ISSN 0885-8950

Shamshirband, S. and Mohammadi, K. and Tong, C. W. and Zamani, M. and Motamedi, S. and Ch, S. (2016) A hybrid SVM-FFA method for prediction of monthly mean global solar radiation. Theoretical and Applied Climatology, 125 (1-2). pp. 53-65. ISSN 0177-798X

Abdullahi, M. and Ngadi, M. A. (2016) Hybrid symbiotic organisms search optimization algorithm for scheduling of tasks on cloud computing environment. PLoS ONE, 11 (6). ISSN 1932-6203

Sayahkarajy, M. and Mohamed, Z. and Faudzi, A. A. M. and Supriyanto, E. (2016) Hybrid vibration and rest-to-rest control of a two-link flexible robotic arm using H8 loop-shaping control design. Engineering Computations (Swansea, Wales), 33 (2). pp. 395-409. ISSN 0264-4401

Maruti @ Ezani, Syaza Faiqah and Amerudin, Shahabuddin and Wan Kadir, Wan Hazli and Abdul Rahman, Muhammad Zulkarnain and Mohamed Yusof, Zainab and Ariffin, Azman and Tam, Tze Huey (2016) Hydrodynamic modelling of a proposed Lebir and Galas dam for flood hazard analysis. Malaysian Journal of Civil Engineering (MJCE), 28 (3). pp. 223-239. ISSN 1823-7843

Bhatti, I. and Bhutto, A. W. and Qureshi, K. and Kamarudin, K. S. N. and Bazmi, A. A. and Ahmad, F. (2016) Hydrodynamics study of the modified rotating disc contactor for CO2 absorption from natural gas using emulsion liquid membrane. Chemical Engineering Research and Design, 111 . pp. 465-478. ISSN 0263-8762

Isa, Khairuddin Md. and Abdullah, Tuan Amran Tuan and Ali, Umi Fazara Md. (2016) Hydrogen donor solvents in liquefaction of biomass: a review. Renewable and Sustainable Energy Reviews . ISSN 1364-0321 (In Press)

Nabgan, W. and Tuan Abdullah, T. A. and Mat, R. and Nabgan, B. and Triwahyono, S. and Ripin, A. (2016) Hydrogen production from catalytic steam reforming of phenol with bimetallic nickel cobalt catalyst on various supports. Applied Catalysis A: General, 527 . 161 170. ISSN 0926-860X

Nabgan, W. and Abdullah, T. A. T. and Mat, R. and Nabgan, B. and Asli, U. A. and Johari, A. (2016) Hydrogen production from phenol steam reforming over Ni-Co/ZrO2 catalyst: effect of catalyst dilution. Jurnal Teknologi, 78 (8-3). pp. 77-82. ISSN 0127-9696

Azni, S. R. and Abu Bakar, M. A. and Farhana, D. H. and Ab Razak, S. N. and Bidin, N. (2016) Hydrogen production via catalyst of green laser, molybdenum and ethanol. Jurnal Teknologi, 78 (3). pp. 241-245. ISSN 0127-9696

Ismail, M. and Yap, F. A. H. and Sulaiman, N. N. and Ishak, M. H. I. (2016) Hydrogen storage properties of a destabilized MgH2-Sn system with TiF3 addition. Journal of Alloys and Compounds, 678 . pp. 297-303. ISSN 0925-8388

Alahmadi, F. and Abd. Rahman, N. and Yusop, Z. (2016) Hydrological modelling of ungauged arid volcanic environments at upper Bathan catchment, Madinah, Saudi Arabia. Jurnal Teknologi, 78 (9-4). pp. 9-14. ISSN 0127-9696

Kouhnavard, M. and Ludin, N. A. and Ghaffari, B.V. and Ikeda, S. and Sopian, K. and Miyake, M. (2016) Hydrophilic carbon/TiO2 colloid composite: a potential counter electrode for dye-sensitized solar cells. Journal of Applied Electrochemistry, 46 (2). pp. 259-266. ISSN 0021-891X

Shirdar, M. R. and Taheri, M. M. and Moradifard, H. and Keyvanfar, A. and Shafaghat, A. and Shokuhfar, T. and Izman, S. (2016) Hydroxyapatite-Titania nanotube composite as a coating layer on Co-Cr-based implants: mechanical and electrochemical optimization. Ceramics International, 42 (6). pp. 6942-6954. ISSN 0272-8842

Bajuri, M. N. and Isaksson, H. and Eliasson, P. and Thompson, M. S. (2016) A hyperelastic fibre-reinforced continuum model of healing tendons with distributed collagen fibre orientations. Biomechanics and Modeling in Mechanobiology, 15 (6). pp. 1457-1466. ISSN 1617-7959

Jayasingam, Sharmila and Fujiwara, Yuji and Thurasamy, Ramayah (2016) ‘I am competent so I can be choosy’: choosiness and its implication on graduate employability. Studies in Higher Education . pp. 1-16. ISSN 0307-5079 (In Press)

Al-Geelani, Nasir A. and M. Piah, M. Afendi and Saeh, Ibrahim and Othman, Nordiana Azlin and Muhamedin, Fatin Liyana and Kasri, N. F. (2016) Identification of acoustic signals of internal electric discharges on glass insulator under variable applied voltage. International Journal of Electrical and Computer Engineering, 6 (2). pp. 827-834. ISSN 2088-8708

Doraisamy, M. and Bin Ibrahim, S. and Mahrin, M. N. (2016) Identification of criteria and metrics for software projects performance: an outcome of interviews. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3150-3155. ISSN 1819-6608

Yusof, N. M. and Ishak, N. and Adnan, R. and Sam, Y. M. and Tajjudin, M. and Rahiman, M. H. F. (2016) Identification of electro-hydraulic actuator using fractional model. International Journal on Smart Sensing and Intelligent Systems, 9 (1). pp. 32-49. ISSN 1178-5608

Weng, Howe Chan and Tan Ah Chik @ Mohamad, Mohd Saberi and Deris, Safaai and Zaki, Nazar and Kasim, Shahreen and Omatu, Sigeru and Juan, Manuel Corchado and Hany, Al Ashwal (2016) Identification of informative genes and pathways using an improved penalized support vector machine with a weighting scheme. Computers in Biology and Medicine, 77 . pp. 102-115. ISSN 0010-4825

Hamzehalipour Almaki, J. and Nasiri, R. and Tet Soon, W. and Huyop, F. Z. (2016) Identification of novel bacterial species capable of degrading dalapon using 16S rRNA sequencing. Jurnal Teknologi, 78 (6). pp. 77-82. ISSN 0127-9696

Atago, Y. and Shimodaira, J. and Araki, N. and Othman, N. B. and Zakaria, Z. and Fukuda, M. and Futami, J. and Hara, H. (2016) Identification of novel extracellular protein for PCB/biphenyl metabolism in Rhodococcus jostii RHA1. Bioscience, Biotechnology and Biochemistry, 80 (5). pp. 1012-1019. ISSN 0916-8451

Bahri, B. and Shahbakhti, M. and Kannan, K. and Aziz, A. A. (2016) Identification of ringing operation for low temperature combustion engines. Applied Energy, 171 . pp. 142-152. ISSN 0306-2619

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-474. ISSN 1992-8645

Lilo, M. A. and Latiff, L. A. and Abu, A. B. H. (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-474. ISSN 1992-8645

Abdul Latiff, Liza and Abu, Aminudin and Moneer, Ali Lilo (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-473. ISSN 1992-8645

Moneer, Ali Lilo and Abdul Latiff, Liza and Yousif, I. Almashhadany and Abu, Aminudin (2016) Identify and classify vibration signal for steam turbine based on neural sleep fuzzy system. Research Journal in Applied Sciences, Engineering and Technology, 12 (5). pp. 589-598. ISSN 2040-7459

Tajul Ariffin, Hamizah Liyana and Aziz, Zeeshan and Mohd. Raslim, Faraziera and Jaafar, Mastura (2016) Identify disputes in the construction industry: the way forward for innovative procurement system in Malaysia. Research Journal of Fisheries and Hydrobiology, 11 (3). pp. 98-104. ISSN 1816-9112

Mirzaei, H. and Bahreini, A. and Moeinaddini, M. and Asadi-Shekari, Z. and Shah, M. Z. and Sultan, Z. (2016) Identify significant indicators for a happy city. Planning Malaysia, 4 (Specia). pp. 263-272. ISSN 1675-6215

Ngien, S. K. and Chin, P. Q. and Hasan, M. and Ali, M. I. and Mohd Tadza, M. Y. and Abd. Rahman, N. (2016) Image analysis of non-aqueous phase liquid migration in aggregated kaolin. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6393-6398. ISSN 1819-6608

Kahar, U. M. and Sani, M. H. and Chan, K. G. and Goh, K. M. (2016) Immobilization of α-amylase from anoxybacillus sp. SK3-4 on relizyme and immobead supports. Molecules, 21 (9). ISSN 1420-3049

Soh, S. K. C. and Kassim, I. S. and Jusoh, S. A. and Samsuddin, M. (2016) Immobilization of highly effective palladium catalyst onto poly(4-vinylpyridine): synthesis and characterization. Malaysian Journal of Analytical Sciences, 20 (4). pp. 856-862. ISSN 1394-2506

Saadatkhah, N. and Tehrani, M. H. and Mansor, S. and Khuzaimah, Z. and Kassim, A. and Saadatkhah, R. (2016) Impact assessment of land cover changes on the runoff changes on the extreme flood events in the Kelantan River basin. Arabian Journal of Geosciences, 9 (17). ISSN 1866-7511

Said Mahraz, Z. A. and Sahar, M. R. and Ghoshal, S. K. (2016) Impact of annealing time on silver nanoparticles growth assisted spectral features of erbium-zinc-boro-tellurite glass. Journal of Luminescence, 180 . pp. 1-7. ISSN 0022-2313

Wang, Xiao Jun and Zhang, Jian Yun and Ali, Mahtab and Shahid, Shamsuddin and He, Rui Min and Xia, Xing Hui and Jiang, Zhuo (2016) Impact of climate change on regional irrigation water demand in Baojixia irrigation district of China. Mitigation and Adaptation Strategies for Global Change, 21 (2). pp. 233-247. ISSN 1381-2386

Al Amin, A. Q. and Alam, G. M. (2016) Impact of El-Ni\xF1o on agro-economics in Malaysia and the surrounding regions: An analysis of the events from 1997-98. Asian Journal of Earth Sciences, 9 (1). pp. 1-8. ISSN 1819-1886

Mokhber, M. and Tan, G. G. and Vakilbashi, A. and Zamil, N. A. M. and Basiruddin, R. (2016) Impact of entrepreneurial leadership on organization demand for innovation: Moderating role of employees innovative self-efficacy. International Review of Management and Marketing, 6 (3). pp. 415-421. ISSN 2146-4405

Razak, N. A. and Hashim, S. and Mhareb, M. H. A. and Alajerami, Y. S. M. and Azizan, S. A. and Tamchek, N. (2016) Impact of Eu3+ ions on physical and optical properties of Li2O-Na2O-B2O3 glass. Chinese Journal of Chemical Physics, 29 (3). pp. 395-400. ISSN 1674-0068

Valaei, N. and Rezaei, S. and Emami, M. (2016) Impact of exploitative learning strategy on Malaysian SMEs creativity and innovation capabilities. International Journal of Management and Enterprise Development, 15 (4). pp. 328-354. ISSN 1468-4330

Sheikh Dawood, Shamsudin Mustafa and Salmiati, Salmiati and Arman, Nor Zaiha (2016) The impact of flood on water quality and benthic invertebrate in rivers at Gua Musang, Kelantan. Environmental Engineering, Hydraulics and Hydrology, 3 (1). pp. 67-82. ISSN 9789670194752

Yazdani, Leila and Aris, Sulaiman (2016) The impact of governmental venture capital on innovative young firms growth. International Business Management, 10 (8). pp. 1512-1517. ISSN 1993-5250

Aditya Kiran, S. and Lukka Thuyavan, Y. and Arthanareeswaran, Gangasalam and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2016) Impact of graphene oxide embedded polyethersulfone membranes for the effective treatment of distillery effluent. Chemical Engineering Journal, 286 . pp. 528-537. ISSN 1385-8947

Jouda, A. A. and Ahmad, U. N. U. and Dahleez, K. A. (2016) The impact of human resource management practices on employees performance: the case of Islamic university of Gaza in Palestine. International Review of Management and Marketing, 6 (4). pp. 1080-1088. ISSN 2146-4405

Muhammad, Rafeq Razak and Johar, Foziah and Abd. Khalil, Rabiatul Adawiyah (2016) The impact of Iskandar Malaysia development on urban amenities. Planning Malaysia, 4 (4). pp. 121-134. ISSN 1675-6215

Razak, Muhammad Rafeq and Johar, Foziah and Abd. Khalil, Rabiatul Adawiyah (2016) The impact of Iskandar Malaysia development on urban amenities. Planning Malaysia, 4 (Specia). pp. 121-134. ISSN 1675-6215

Ramamurthi, K. and Vakilbashi, A. and Rashid, S. Z. A. and Mokhber, M. and Basiruddin, R. (2016) Impact of job stressors factors on employees’ intention to leave mediated by job engagement and dispositional factors. International Review of Management and Marketing, 6 (3). pp. 528-531. ISSN 2146-4405

Thangavelu, S. K. and Ahmed, A. S. and Ani, F. N. (2016) Impact of metals on corrosive behavior of biodiesel-diesel-ethanol (BDE) alternative fuel. Renewable Energy, 94 . pp. 1-9. ISSN 0960-1481

Benk, Serkan and Budak, Tamer (2016) The impact of religiosity on tax compliance among Turkish self-employed taxpayers. Religions, 7 (4). ISSN 2077-1444

Ramakrishnan, S. and Nabi, A. A. and Daud, Z. and Anuar, M. A. (2016) Impact of sector level variables on political scenarios in Pakistan. International Journal of Economics and Financial Issues, 6 (3). pp. 203-208. ISSN 2146-4138

Thuyavan, Y. L. and Anantharaman, N. and Arthanareeswaran, G. and Ismail, A. F. (2016) Impact of solvents and process conditions on the formation of polyethersulfone membranes and its fouling behavior in lake water filtration. Journal of Chemical Technology and Biotechnology, 91 (10). pp. 2568-2581. ISSN 0268-2575

Shufang, F. and Md. Ariff, Mohd. Shoki and Indasukati, Indasukati and M. Zakuan, Norhayati and Zardian, Mohsen Gol and Mat Saman, Muhamad Zameri (2016) The impact of supply chain management practices on supply chain performance in Chinese manufacturing companies. Social Sciences (Pakistan), 11 (11). pp. 2679-2685. ISSN 1818-5800

Shahri, A. B. and Ismail, Z. and Mohanna, S. (2016) The impact of the security competency on "Self-Efficacy in Information Security" for effective Health Information Security in Iran. Journal of Medical Systems, 40 (11). ISSN 0148-5598

Al Kindy, A. M. Z. and Shah, I. M. and Jusoh, A. (2016) The impact of transformational leadership behaviors on work performance of Omani civil service agencies. Asian Social Science, 12 (3). pp. 152-164. ISSN 1911-2017

Mohd. Zin, N. A. and Khan, I. and Shafie, S. (2016) The impact silver nanoparticles on MHD free convection flow of Jeffrey fluid over an oscillating vertical plate embedded in a porous medium. Journal of Molecular Liquids, 222 . pp. 138-150. ISSN 0167-7322

Chong, C. Y. and Lai, G. S. and Lau, W. J. and Yusof, N. and Goh, P. S. and Emadzadeh, D. (2016) Impacts of hydrophilic nanofillers on separation performance of thin film nanocomposite reverse osmosis membrane. Jurnal Teknologi, 78 (12). pp. 63-68. ISSN 0127-9696

Chan Hong Kit, P. and Abdul Rasid, S. Z. and Md. Husin, M. (2016) The impacts of Malaysian managed care on doctor-patient relationships, ethical practice of medicine, and quality of care: a study on primary care physicians’ perception. International Journal of Healthcare Management, 9 (2). pp. 119-126. ISSN 2047-9700

Shreaz, S. and Shiekh, R. A. and Raja, V. and Wani, W. A. and Behbehani, J. M. (2016) Impaired ergosterol biosynthesis mediated fungicidal activity of Co(II) complex with ligand derived from cinnamaldehyde. Chemico-Biological Interactions, 247 . pp. 64-74. ISSN 0009-2797

Abubakar, I. and Lam, H. Y. and Din, J. (2016) Implementation of adaptive coding and modulation for satellite communication links in heavy rain region: an operators perspective. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7858-7861. ISSN 1819-6608

Anuar, Syahid and Sallehuddin, Roselina and Selamat, Ali (2016) Implementation of artificial neural network on graphics processing unit for classification problems. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9876 L . pp. 303-310. ISSN 0302-9743

Hamdan, A. R. and Anuar, M. K. and Khan, A. (2016) Implementation of co-teaching approach in an inclusive classroom: overview of the challenges, readiness, and role of special education teacher. Asia Pacific Education Review, 17 (2). pp. 289-298. ISSN 1598-1037

Salleh, N. and Daud, S. M. and Sabri, S. F. and Sam, S. M. and Adam, M. Z. (2016) Implementation of cryptography algorithms in SCADAKratos application. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3253-3258. ISSN 1819-6608

Efendi, R. and Deris, M. M. and Ismail, Z. (2016) Implementation of fuzzy time series in forecasting of the non-stationary data. International Journal of Computational Intelligence and Applications, 15 (2). ISSN 1469-0268

Risman, Nur Sabrina and Yassin, Siti Norhayati and Nayan, Nazrul Anuar and Wei, Sia Chen and Hau, Yuan Wen (2016) Implementation of heart rate variability analysis algorithm on FPGA platform. International Journal of Applied Engineering Research, 11 (12). pp. 7809-7814. ISSN 0973-4562

Ting, Rickey Pek Eek and Mat Darus, Intan Zaurah and Sahlan, Shafishuhaza and Mohd. Samin, Pakharuddin and Shaharuddin, Nik Mohd Ridzuan (2016) Implementation of swarm algorithm in modeling a flexible beam structure. Journal of Vibroengineering, 18 (8). pp. 4914-4934. ISSN 1392-8716

Mohebbi, M. and Hashemi, M. and Mailah, M. (2016) Implementing active force control to reduce vibration of a short length drive shaft. Jurnal Teknologi, 78 (10). pp. 167-174. ISSN 0127-9696

Almudallal, A. W. and Bakri, N. and Muktar, S. N. and El Farra, M. M. (2016) Implementing knowledge management in the Palestinian public sector institutions: empirical study on the presidency of the Palestinian government. International Review of Management and Marketing, 6 (4). pp. 101-107. ISSN 2146-4405

Zahari, Haziq Zul Asyraf and How Yee, Kevin Chester Wong and Abd. Latib, Firdaus and Abdul Hamid, Abdul Rahim (2016) Implementing occupational safety and health requirements in construction project. Journal of Advanced Research in Applied Sciences and Engineering Technology, 5 (5). pp. 53-63. ISSN 2462-1943

Ahmed, A. and Devadason, E. S. and Al Amin, A. Q. (2016) Implications of climate change damage for agriculture: sectoral evidence from Pakistan. Environmental Science and Pollution Research, 23 (20). pp. 20688-20699. ISSN 0944-1344

Khan, Tareef Hayat and Rana, Sohel (2016) Implicit values behind young architects’ moral level: a case study in Malaysia. Asian Social Science, 12 (2). pp. 138-150. ISSN 1911-2017

Tan, L. P. and Wong, K. Y. (2016) Importance versus practice of knowledge management constructs in manufacturing companies. Business Information Review, 33 (4). pp. 232-240. ISSN 0266-3821

Buntat, Y. and Saud, M. S. and Mokhtar, M. and Kamin, Y. and Feh, L. S. (2016) Important skills for biomedical services: the perspectives of Malaysian employers and employees. Work, 55 (2). pp. 481-487. ISSN 1051-9815

Babaeizadeh, Soudeh and Ahmad, Rohanin (2016) An improved artificial bee colony algorithm for constrained optimization. Research Journal of Applied Sciences, 11 (1). pp. 14-22. ISSN 1815-932X

Davoudi, K. V. and Daud, S. M. and Khodadadi, M. and Oskooie, M. A. and Momeni, H. and Adam, M. Z. (2016) Improved battery life for context awareness application in smart-phones. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3375-3379. ISSN 1819-6608

Beheshti, Z. and Shamsuddin, S. M. and Hasan, S. and Wong, N. E. (2016) Improved centripetal accelerated particle swarm optimization. International Journal of Advances in Soft Computing and its Applications, 8 (2). pp. 1-27. ISSN 2074-8523

Mahalleh, V. B. S. and Selamat, H. and Sandhu, F. and Khamis, N. (2016) Improved crowd psychological model and control. Jurnal Teknologi, 78 (6-13). pp. 121-128. ISSN 0127-9696

Haseeb, K. and Bakar, K. A. and Abdullah, A. H. and Darwish, T. and Ullah, F. and Ahmed, A. (2016) Improved energy aware cluster based data routing scheme for WSN. Telkomnika (Telecommunication Computing Electronics and Control), 14 (2). pp. 531-537. ISSN 1693-6930

Syadli, H. and Abdullah, M. P. and Faridiansyah, I. and Hassan, M. Y. and Hussin, F. (2016) An improved load shedding scheduling strategy for solving power supply defisit. Jurnal Teknologi, 78 (5-7). pp. 61-66. ISSN 0127-9696

Al-Nahari, Abdulaziz and Mohamad, Mohd. Murtadha and Raja Zahilah, Raja Zahilah (2016) An improved maintenance strategy in ad hoc on-demand routing protocols for mobile ad hoc networks. Jurnal Teknologi, 78 (6-11). pp. 59-65. ISSN 0127-9696

Wahid, Abdul and Ahmad, Arshad (2016) Improved multi-model predictive control to reject very large disturbances on a distillation column. International Journal of Technology, 7 (6). pp. 962-971. ISSN 2086-9614

Jidin, A. and Sanusi, S. and Sutikno, T. and Idris, N. R. N. (2016) Improved output voltage quality using space vector modulation for multilevel inverters. Telkomnika (Telecommunication Computing Electronics and Control), 14 (2). pp. 387-389. ISSN 1693-6930

Emami, H. and Hajihashemi, M. and Alavi, S. E. (2016) Improved sensitivity RF photonics doppler frequency measurement system. IEEE Photonics Journal, 8 (5). ISSN 1943-0655

Alamri, Y. A. and Idris, N. R. N. and Alsofyani, I. M. and Sutikno, T. (2016) Improved stator flux estimation for direct torque control of induction motor drives. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1049-1060. ISSN 2088-8694

Sallehuddin, R. and Ahmad Ubaidillah, Sharifah Hafizah Sy. and Zain, A. M. and Alwee, R. and Radzi, N. H. M. (2016) An improvement in support vector machine classification model using grey relational analysis for cancer diagnosis. Jurnal Teknologi, 78 (8-2). pp. 107-119. ISSN 0127-9696

Rahman, F. A. and Desa, M. I. and Wibowo, A. and Haris, N. A. (2016) An improvement of Knowledge Discovery Database (KDD) framework for effective decision. Journal of Artificial Intelligence, 9 (4). pp. 72-77. ISSN 1994-5450

Idemudia, Samson and Rohani, Mohd. Fo'ad and Sirat @ Md. Siraj, Maheyzah and Othman, Siti Hajar (2016) An improvement of student examination assessment through online (e-exam) by considering psychological distress factors. International Journal of Computer Science and Information Technology & Security (IJCSITS), 6 (5). pp. 39-45. ISSN 2249-9555

Noman, Fawaz Ghaleb and Kamsah, Nazri and Mohamed Kamar, Haslinda (2016) Improvement of thermal comfort inside a mosque building. Jurnal Teknologi, 78 (8-4). pp. 9-18. ISSN 0127-9696

Hairuddin, Nurul Liyana and Mi Yusuf, Lizawati and Othman, Mohd. Shahizan and Abdul Majid, Hairudin (2016) Improving gender classification with feature selection in forensic anthropology. Jurnal Teknologi, 78 (12-2). pp. 57-63. ISSN 0127-9696

Long, C. S. and Kowang, T. O. and Chin, T. A. and Hee, O. C. (2016) Improving organizational performance through training function: a review. International Business Management, 10 (4). pp. 475-478. ISSN 1993-5250

Hasan, N. S. and Hassan, M. Y. and Abdullah, H. and Rahman, H. A. and Omar, W. Z. W. and Rosmin, N. (2016) Improving power grid performance using parallel connected compressed air energy storage and wind turbine system. Renewable Energy, 96 . pp. 498-508. ISSN 0960-1481

Qureshi, Kashif Naseer and Abdullah, Abdul Hanan and Iqbal, Saleem and Muhammad, Zia (2016) Improving quality of service through road side back-bone network in VANET. Jurnal Teknologi, 78 (2). pp. 7-14. ISSN 0127-9696

Rahim, S. Z. A. and Sharif, S. and Zain, A. M. and Nasir, S. M. and Mohd Saad, R. (2016) Improving the quality and productivity of molded parts with a new design of conformal cooling channels for the injection molding process. Advances in Polymer Technology, 35 (1). ISSN 0730-6679

Shayfull, Z. and Sharif, S. and Zain, A. M. and Nasir, S. M. and Saad, R. M. (2016) Improving warpage with milled groove square shape conformal cooling channels. Key Engineering Materials, 700 . pp. 31-41. ISSN 1013-9826

Wan Abdullah, Wan Nazwanie and Ali, Rusmidah and Wan Abu Bakar, Wan Azelee (2016) In depth investigation of Fe/MoO3-PO4/Al2O3 catalyst in oxidative desulfurization of Malaysian diesel with TBHP-DMF system. Journal of the Taiwan Institute of Chemical Engineers, 58 . pp. 344-350. ISSN 1876-1070

Liew, Mei Jing and Mohamed Saleh, Abdul Hakim and Mohamad, Mohd. Saberi and Choon, Yee Wen and Deris, Safaai and A. Samah, Azurah and Abdul Majid, Hairudin (2016) In silico gene deletion of escherichia coli for optimal ethanol production using a hybrid algorithm of particle swarm optimization and flux balance analysis. Jurnal Teknologi, 78 (12-3). pp. 181-187. ISSN 0127-9696

Wong, S. T. and Shamsuddin, M. and Alizadeh, A. and Yun, Y. S. (2016) In situ generated palladium seeds lead to single step bioinspired growth of Au(sbnd)Pd bimetallic nanoparticles with catalytic performance. Materials Chemistry and Physics, 183 . pp. 356-365. ISSN 0254-0584

Shirdar, M. R. and Taheri, M. M. and Sudin, I. and Shafaghat, A. and Keyvanfar, A. and Abd. Majid, M. Z. (2016) In situ synthesis of hydroxyapatite-grafted titanium nanotube composite. Journal of Experimental Nanoscience, 11 (10). pp. 816-822. ISSN 1745-8080

Lim, M. M. and Sultana, N. (2016) In vitro cytotoxicity and antibacterial activity of silver-coated electrospun polycaprolactone/gelatine nanofibrous scaffolds. 3 Biotech, 6 (2). ISSN 2190-572X

Nasiri, R. and Hamzehalipour Almaki, J. and Idris, A. B. and Abdul Majid, F. A. and Nasiri, M. and Salouti, M. and Irfan, M. and Amini, N. and Marvibaigi, M. (2016) In vitro evaluation of actively targetable superparamagnetic nanoparticles to the folate receptor positive cancer cells. Materials Science and Engineering C, 69 . pp. 1147-1158. ISSN 0928-4931

Chin, G. S. and Todo, H. and Kadhum, W. R. and Hamid, M. A. and Sugibayashi, K. (2016) In vitro permeation and skin retention of a-mangostin proniosome. Chemical and Pharmaceutical Bulletin, 64 (12). pp. 1666-1673. ISSN 0009-2363

Kamaroddin, M. F. and Hanotu, J. and Gilmour, D. J. and Zimmerman, W. B. (2016) In-situ disinfection and a new downstream processing scheme from algal harvesting to lipid extraction using ozone-rich microbubbles for biofuel production. Algal Research, 17 . pp. 217-226. ISSN 2211-9264

Wong, Sze Ting and Shamsuddin, Mustaffa and Alizadeh, Abdolhamid and Yeoung, Sang Yun (2016) In-situ generated palladium seeds lead to single-step bioinspired growth of Au-Pd bimetallic nanoparticles with catalytic performance. Materials Chemistry and Physics, 183 . pp. 356-365. ISSN 0254-0584

Shapiai, M. I. and Ibrahim, Z. and Adam, A. and Mokhtar, N. (2016) Incorporating prior knowledge in solving system identification problem with insufficient samples based on pareto optimality concept. ICIC Express Letters, 10 (1). pp. 21-26. ISSN 1881-803X

Aminudin, N. I. and Ahmad, F. and Taher, M. and Zulkifli, R. M. (2016) Incrassamarin A–D: four new 4-substituted coumarins from Calophyllum incrassatum and their biological activities. Phytochemistry Letters, 16 . pp. 287-293. ISSN 1874-3900

Nasution, Henry and A. Dahlan, Afiq and M. Nasib, Affandi and Abdul Aziz, Azhar (2016) Indoor temperature control and energy saving potential of split unit air conditioning system using fuzzy logic controller. IAENG International Journal of Computer Science, 43 (4). pp. 402-405. ISSN 1819-656X

El Gayar, Ali I. and Abdul-Malek, Zulkurnain (2016) Induced voltages on a gas pipeline due to lightning strikes on nearby overhead transmission line. International Journal of Electrical and Computer Engineering, 6 (2). pp. 495-503. ISSN 2088-8708

Wong, K. J. and Khoo, S. J. and Low, K. O. (2016) Influence of alkali treatment on the interfacial properties of bamboo/polyester composites. Recent Patents on Mechanical Engineering, 9 (3). pp. 247-254. ISSN 1874-477X

Mohsenizadeh, S. and Alipour, R. and Ahmad, Z. and Alias, A. (2016) Influence of auxetic foam in quasi-static axial crushing. International Journal of Materials Research, 107 (10). pp. 916-924. ISSN 1862-5282

Jeffry, S. N. A. and Jaya, R. P. and Manap, N. and Miron, N. A. and Hassan, N. A. (2016) The influence of coconut shell as coarse aggregates in asphalt mixture. Key Engineering Materials, 700 . pp. 227-237. ISSN 1013-9826

Mohammad, Nor Nisa Balqis and Arsad, Agus and Rahmat, Abdul Razak and Abdullah Sani, Nur Syazana and Ali Mohsin, Mohammed Ehtesham (2016) Influence of compatibilizer on the structure properties of polylactic acid/natural rubber blends. Polymer Science Series A, 58 (2). pp. 177-185. ISSN 0965-545X

Krishnamurthy, P. H. and Yogarathinam, L. T. and Gangasalam, A. and Ismail, A. F. (2016) Influence of copper oxide nanomaterials in a poly(ether sulfone) membrane for improved humic acid and oil-water separation. Journal of Applied Polymer Science, 133 (36). ISSN 0021-8995

Huseien, G. F. and Mirza, J. and Ismail, M. and Hussin, M. W. (2016) Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm oil fuel ash. Construction and Building Materials, 125 . pp. 1229-1240. ISSN 0950-0618 (In Press)

Ghasan, Fahim Huseien and Mirza, Jahangir and Ismail, Mohammad and Hussin, Mohd Warid (2016) Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm oil fuel ash. Construction and Building Materials, 125 . pp. 1229-1240. ISSN 0950-0618

Sharifpour, Yousef and Ali Khan, Mohd Noor Azli and Alizadeh, Mostafa and Mohammad, Rahim Akhgarzadeh and Mahmodi, Edris (2016) The influence of electronic word-of-mouth on consumers' purchase intentions and brand awareness in Iranian telecommunication industry. International Journal of Supply Chain Management, 5 (3). pp. 131-141. ISSN 2050-7399

Wong, M. and Long, C. S. and Ismail, W. K. W. and Kowang, T. O. (2016) The influence of employee perceptions of training on turnover intention. Information (Japan), 19 (18A). pp. 3197-3201. ISSN 1343-4500

Wong, M. and Long, C. S. and Ismail, W. K. W. and Kowang, T. O. (2016) The influence of employee perceptions of training on turnover intention. Information (Japan), 19 (18A). pp. 3197-3201. ISSN 1343-4500

Akinyode, Babatunde Femi and Tareef, Hayat Khan (2016) Influence of estate agents and building plan approval cost on housing affordability in developing cities. OSR Journal of Humanities and Social Science (IOSR-JHSS), 21 (9). pp. 47-55. ISSN 2279-0837

Ali, Faizan and Ryu, Kisang and Hussain, Kashif (2016) Influence of experiences on memories, satisfaction and behavioral intentions: a study of creative tourism. Journal of Travel and Tourism Marketing, 33 (1). pp. 85-100. ISSN 1054-8408

Ab Halim, M. H. and Nor Anuar, A. and Abdul Jamal, N. S. and Azmi, S. I. and Ujang, Z. and Bob, M. M. (2016) Influence of high temperature on the performance of aerobic granular sludge in biological treatment of wastewater. Journal of Environmental Management, 184 . pp. 271-280. ISSN 0301-4797

Hee, Ong Choon and Cheng, Teo Yin and Yaw, Chang Chun and Gee, Wong Vee and Kamaludin, Siti Maryam and Prabhagaran, Jasveena R. (2016) The influence of human resource management practices on career satisfaction: evidence from Malaysia. International Review of Management and Marketing, 6 (3). pp. 517-521. ISSN 2146-4405

Marappan, Deviga and Khan, Aqeel and Abdul Latif, Adibah and Yusoff, Ahmad Mustaqim (2016) Influence of maternal depression and sucidal thoughts: role of spousal support during pregnancy. Man in India, 96 (1-2). pp. 9-17. ISSN 0025-1569

Mohd. Ahyan, Nurul Aini and Samion, Syahrullail (2016) Influence of micro-pits indentation and palm based-oil on taper die sliding contact surface in cold extrusion process. International Journal of Precision Engineering and Manufacturing, 17 (7). pp. 917-930. ISSN 2234-7593

Nuraliza, N. and Syahrullail, S. and Razak, D. M. and Azwadi, C. S. N. (2016) Influence of micro-pits on sliding motion under low speeds for block-on-disk tribotester. Particulate Science and Technology, 34 (6). pp. 754-763. ISSN 0272-6351

Hassan, A. and Noordin, M. Y. and Izman, S. and Denni, K. (2016) Influence of microwave and conventional annealing processes in improving an electrodeposited nickel interlayer characteristics. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (10). pp. 4951-4959. ISSN 1073-5623

Khaleghi, M. and Wahid, M. A. and Saat, A. and Fairus, M. Y. M. and Sies, M. M. and Kamaruzaman, N. and Mizanur Rahman, M. and Mohammad Amri, M. and Mohammed, H. A. (2016) Influence of modified air on combustion characteristics in meso-scale vortex combustor. Jurnal Teknologi, 78 (10-2). pp. 15-19. ISSN 0127-9696

Egba, E. I. and Bakhary, N. and Ismail, M. (2016) Influence of natural climate curing treatment on corrosion activity of reinforced concrete. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Nabgan, W. and Tuan Abdullah, T. A. and Mat, R. and Nabgan, B. and Gambo, Y. and Triwahyono, S. (2016) Influence of Ni to Co ratio supported on ZrO2 catalysts in phenol steam reforming for hydrogen production. International Journal of Hydrogen Energy, 41 (48). pp. 22922-22931. ISSN 0360-3199

Shah, A. and Izman, S. and Hassan, M. A. (2016) Influence of nitrogen flow rate in reducing tin microdroplets on biomedical TI-13ZR-13NB alloy. Jurnal Teknologi, 78 (5-10). pp. 6-10. ISSN 0127-9696

Bolong, N. and Saad, I. and Makinda, J. and Yaser, A. Z. and Abdullah, M. H. and Ismail, A. F. (2016) Influence of oil palm empty fruit bunch (OPEFB) agro-waste properties as filtration medium to improve urban stormwater. Jurnal Teknologi, 78 (8). pp. 39-46. ISSN 0127-9696

Sani, N. A. A. and Lau, W. J. and Nordin, N. A. H. M. and Ismail, A. F. (2016) Influence of organic solvents and operating conditions on the performance of polyphenylsulfone (PPSU)/copper-1,3,5-benzenetricarboxylate (Cu-BTC) solvent resistant nanofiltration (SRNF) membranes. Chemical Engineering Research and Design, 115 . pp. 66-76. ISSN 0263-8762

Shenvi, S. S. and Isloor, A. M. and Ahmad, A. L. and Garudachari, B. and Ismail, A. F. (2016) Influence of palm oil fuel ash, an agro-industry waste on the ultrafiltration performance of cellulose acetate butyrate membrane. Desalination and Water Treatment, 57 (55). pp. 26414-26426. ISSN 1944-3994

Abd Mutalib, M. and Othman, M. H. D. and Aziz, M. and A. Rahman, M. and Jaafar, J. and Ismail, A. F. and Mohamed, M. A. (2016) The influence of PEEK as a pore former on the microstructure of brush-painted LSCF cathodes. Journal of Solid State Electrochemistry, 20 (10). pp. 2895-2905. ISSN 1432-8488

Zeinali, M. and Mazlan, S. A. and Choi, S. B. and Imaduddin, F. and Hamdan, L. H. (2016) Influence of piston and magnetic coils on the field-dependent damping performance of a mixed-mode magnetorheological damper. Smart Materials and Structures, 25 (5). ISSN 0964-1726

Yakubu, Mahadi Lawan and Yusop, Zulkifl and Fulazzaky, Mohamad Ali (2016) The influence of rain intensity on raindrop diameter and the kinetics of tropical rainfall: case study of Skudai, Malaysia. Hydrological Sciences Journal, 61 (5). pp. 944-951. ISSN 0262-6667

Nazir, R. and Ghareh, S. and Mosallanezhad, M. and Moayedi, H. (2016) The influence of rainfall intensity on soil loss mass from cellular confined slopes. Measurement: Journal of the International Measurement Confederation, 81 . pp. 13-25. ISSN 0263-2241

Hussin, N. and Quoquab, F. and Mohammad, J. and Singh, H. and Husin, M. M. and Jamil, R. and Salam, Z. A. (2016) The influence of religiosity in credit card selection. Advanced Science Letters, 22 (12). pp. 4494-4496. ISSN 1936-6612

Mat Desa, M. S. Z. and Hassan, A. and Arsad, A. and Arjmandi, R. and Mohammad, N. N. B. (2016) Influence of rubber content on mechanical, thermal, and morphological behavior of natural rubber toughened poly(lactic acid)-multiwalled carbon nanotube nanocomposites. Journal of Applied Polymer Science, 133 (48). ISSN 0021-8995

Kwok, See Ying and Jusoh, Ahmad and Khalifah, Zainab (2016) The influence of service quality on satisfaction: does gender really matter? Intangible Capital, 12 (2). pp. 444-461. ISSN 2014-3214

Al Sharifi, H. A. M. and Kasim, A. R. M. and Salleh, M. Z. and Sarif, N. M. and Mohammad, N. F. and Shafie, S. and Ali, A. (2016) Influence of slip velocity on convective boundary layer flow of jeffrey fluid under convective boundary conditions. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10950-10953. ISSN 1819-6608

De Silva, R. T. and Soheilmoghaddam, M. and Goh, K. L. and Wahit, M. U. and Bee, S. A. H. and Chai, S. P. and Pasbakhsh, P. (2016) Influence of the processing methods on the properties of poly(lactic acid)/halloysite nanocomposites. Polymer Composites, 37 (3). pp. 861-869. ISSN 0272-8397

Zin, N. A. M. and Khan, I. and Shafie, S. (2016) Influence of thermal radiation on unsteady MHD free convection flow of jeffrey fluid over a vertical plate with ramped wall temperature. Mathematical Problems in Engineering, 2016 . ISSN 1024-123X

Saud, S. N. and Hamzah, E. and Abubakar, T. and Bakhsheshi-Rad, H. R. and Mohammed, M. N. (2016) Influence of tin additions on the phase-transformation characteristics of mechanical alloyed Cu-Al-Ni shape-memory alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 47 (10). pp. 5242-5255. ISSN 1073-5623

Samsudin, N. A. and Idid, Syed Zainol Abidin (2016) Influences of housing settings and designs in fulfilling the Malay residents social cultures. Planning Malaysia, 4 (Specia). pp. 109-120. ISSN 1675-6215

Kasani, H. and Taghi Ahmadi, M. and Khoda-Bakhsh, R. and Rezaeiochbelagh, D. and Ismail, R. (2016) Influences of Sr-90 beta-ray irradiation on electrical characteristics of carbon nanoparticles. Journal of Applied Physics, 119 (12). ISSN 0021-8979

Hassan, N. H. and Ismail, Z. (2016) Information security culture in healthcare informatics: a preliminary investigation. Journal of Theoretical and Applied Information Technology, 88 (2). pp. 202-209. ISSN 1992-8645

Maarop, N. and Thamadharan, K. and Samy, G. N. and Mohd Zainuddin, N. M. and Azmi, A. and Yusop, O. M. and Azizan, A. (2016) Information security management system implementation success factors: a review. Advanced Science Letters, 22 (10). pp. 3023-3026. ISSN 1936-6612

Kidam, K. and Sahak, H. A. and Hassim, M. H. and Shahlan, S. S. and Hurme, M. (2016) Inherently safer design review and their timing during chemical process development and design. Journal of Loss Prevention in the Process Industries, 42 . pp. 47-58. ISSN 0950-4230

Salamon, H. M. and Ali, N. M. and Miskon, S. and Ahmad, N. (2016) Initial recommendations of MOOCs characteristics for academic discipline clusters. Journal of Theoretical and Applied Information Technology, 87 (2). pp. 204-213. ISSN 1992-8645

Saleh, A. T. and Ling, L. S. and Hussain, R. (2016) Injectable magnesium-doped brushite cement for controlled drug release application. Journal of Materials Science, 51 (16). pp. 7427-7439. ISSN 0022-2461

Ng, B. K. and Kanagasundram, T. and Wong, C. Y. and Chandran, V. G. R. (2016) Innovation for inclusive development in Southeast Asia: the roles of regional coordination mechanisms. Pacific Review, 29 (4). pp. 573-602. ISSN 0951-2748

Mohammad, Z. and Othman, N. A. and Abu Bakar, N. and Hara, H. and Zakaria, Z. and Sugiura, N. (2016) Innovation in agricultural support on sustainability for fresh fruit bunch (FFB) of elais guineesis in Malaysia using artificial domestic pollination system (ADOPSY™). Jurnal Teknologi, 78 (8). pp. 125-132. ISSN 0127-9696

Bhatti, I. and Qureshi, K. and Kamarudin, K. S. N. and Bazmi, A. A. and Bhutto, A. W. and Ahmad, F. and Lee, M. (2016) Innovative method to prepare a stable emulsion liquid membrane for high CO2 absorption and its performance evaluation for a natural gas feed in a rotating disk contactor. Journal of Natural Gas Science and Engineering, 34 . pp. 716-732. ISSN 1875-5100

Aldeen, Y. A. A. S. and Salleh, M. and Aljeroudi, Y. (2016) An innovative privacy preserving technique for incremental datasets on cloud computing. Journal of Biomedical Informatics, 62 . pp. 107-116. ISSN 1532-0464

Ngatman, Mohd. Farhan and Abdul Hanan, Sakinah and Mohd. Zamry, Nurfazrina and Kamaruzaman, Anis Farhan and Chizari, Hassan (2016) Inspiring wireless sensor network from brain connectome. International Journal Of Computer Communications And Networks (IJCCN), 5 (1). pp. 1-5. ISSN 22893369

Yusof, K. M. and Sadikin, A. N. and Phang, F. A. and Abdul Aziz, A. A. (2016) Instilling professional skills and sustainable development through problem-based learning (PBL) among first year engineering students. International Journal of Engineering Education, 32 (1). pp. 333-347. ISSN 0949-149X

Zen, I. S. and Subramaniam, D. and Sulaiman, H. and Saleh, A. L. and Omar, W. and Salim, M. R. (2016) Institutionalize waste minimization governance towards campus sustainability: a case study of Green Office initiatives in Universiti Teknologi Malaysia. Journal of Cleaner Production, 135 . pp. 1407-1422. ISSN 0959-6526

Abdullahi, M. E. and Abu Hassan, M. A. and Zainon Noor, Z. and Raja Ibrahim, R. K. (2016) Integrated air stripping and non-thermal plasma system for the treatment of volatile organic compounds from wastewater: statistical optimization. Desalination and Water Treatment, 57 (34). pp. 16066-16077. ISSN 1944-3994

Rasli, F. N. and Kanniah, K. D. and Muthuveerappan, C. and Ho, C. S. (2016) An integrated approach of analytical hierarchy process and GIS for site selection of urban parks in Iskandar Malaysia. International Journal of Geoinformatics, 12 (2). pp. 67-77. ISSN 1686-6576

Zakaria, N. A. and Ibrahim, S. and Mahrin, M. N. (2016) An integrated approach to formulate a value-based software process tailoring framework. Jurnal Teknologi, 78 (12-3). pp. 171-180. ISSN 0127-9696

Zakaria, Noor Azura and Ibrahim, Suhaimi and Mahrin, Mohd Naz'ri (2016) An integrated approach to formulate a value-based software process tailoring framework. Jurnal Teknologi, 78 (12-3). pp. 171-180. ISSN 0127-9696

Abedi, M. and Fathi, M. S. and Mirasa, A. K. and Rawai, N. M. (2016) Integrated collaborative tools for precast supply chain management. Scientia Iranica, 23 (2). pp. 429-448. ISSN 1026-3098

Fallahpour, Alireza and Olugu, Ezutah Udoncy and Musa, Siti Nurmaya and Khezrimotlagh, Dariush and Wong, Kuan Yew (2016) An integrated model for green supplier selection under fuzzy environment: application of data envelopment analysis and genetic programming approach. Neural Computing and Applications, 27 (3). pp. 707-725. ISSN 0941-0643

Ali, F. and Amin, M. and Cobanoglu, C. (2016) An integrated model of service experience, emotions, satisfaction, and price acceptance: an empirical analysis in the Chinese hospitality industry. Journal of Hospitality Marketing and Management, 25 (4). pp. 449-475. ISSN 1936-8623

Liew, P. Y. and Walmsley, T. G. and Wan Alwi, S. R. and Abdul Manan, Z. and Kleme\x9A, J. J. and Varbanov, P. S. (2016) Integrating district cooling systems in Locally Integrated Energy Sectors through Total Site Heat Integration. Applied Energy, 184 . pp. 1350-1363. ISSN 0306-2619

Liew, P. Y. and Walmsley, T. G. and Wan Alwi, S. R. and Abdul Manan, Z. (2016) Integrating district cooling systems in Locally Integrated Energy Sectors through Total Site Heat Integration. Applied Energy, 184 . pp. 1350-1363. ISSN 0306-2619

Mohammad Rozali, N. E. and Wan Alwi, S. R. and Ho, W. S. and Manan, Z. A. and Klemes, J. J. (2016) Integration of diesel plant into a hybrid power system using power pinch analysis. Applied Thermal Engineering, 105 . pp. 792-798. ISSN 1359-4311

Mokhtari, Mehrdad and Abdul-Malek, Zulkurnain and Wooi, Chin Leong (2016) Integration of frequency dependent soil electrical properties in grounding electrode circuit model. International Journal of Electrical and Computer Engineering, 6 (2). pp. 792-799. ISSN 2088-8708

Tarmizi, Tarmizi and Saad, R. and Mohd. Muztaza, N. and Ismail, N. A. and Saidin, M. M. and Mohamad, E. T. (2016) Integration of SPT (N-value), mackintosh probe (M-value) and resistivity values for soft soil assessment. Jurnal Teknologi, 78 (8-6). pp. 87-92. ISSN 0127-9696

Dalvi Esfahani, M. and Rahman, A. A. (2016) An integrative framework to understand the influence of morality on green is adoption: a theoretical perspective. Journal of Theoretical and Applied Information Technology, 88 (2). pp. 337-349. ISSN 1992-8645

Pardis, S. T. and Sofian, S. and Abdullah, D. F. (2016) An integrative proposed model of corporate governance: The corporate governance mechanisms mediates the relationship between board intellectual capital and corporate performance. International Journal of Economics and Financial Issues, 6 (3). pp. 70-75. ISSN 2146-4138

Bature, A. A. and Buyamin, S. and Ahmad, M. N. and Muhammad, M. and Abdullahi, A. M. (2016) Intelligent controllers for velocity tracking of two wheeled inverted pendulum mobile robot. Jurnal Teknologi, 78 (6-11). pp. 1-7. ISSN 0127-9696

Bejarbaneh, Behnam Yazdani and Bejarbaneh, Elham Yazdani and Amin, Mohd. For Mohd. and Fahimifar, Ahmad and Jahed Armaghani, Danial and Majid, Muhd. Zaimi Abd. (2016) Intelligent modelling of sandstone deformation behaviour using fuzzy logic and neural network systems. Bulletin of Engineering Geology and the Environment . pp. 1-17. ISSN 1435-9529 (In Press)

Jasrina, J. and Syed Yusof, Sharifah Kamilah and Mohd. Izhar, Mohd. Azri (2016) Intelligent selective spectrum access in cognitive radio networks. Journal of Artificial Intelligence, 9 (4). pp. 65-71. ISSN 1994-5450

Azmi, A. I. and Abdullah, A. S. and Mohd Noor, M. Y. and Mohd SupaAt, A. S. and Kassim, N. M. and Ngajikin, N. H. (2016) Intensity-modulated temperature sensor based on fiber interferometer with optical bandpass filtering. Microwave and Optical Technology Letters, 58 (6). pp. 1458-1462. ISSN 0895-2477

Saba, L. and Than, J. C. M. and Noor, N. M. and Rijal, O. M. and Kassim, R. M. and Yunus, A. and Ng, C. R. and Suri, J. S. (2016) Inter-observer variability analysis of automatic lung delineation in normal and disease patients. Journal of Medical Systems, 40 (6). ISSN 0148-5598

Khusnun, N. F. and Jalil, A. A. and Triwahyono, S. and Jusoh, N. W. C. and Johari, A. and Kidam, K. (2016) Interaction between copper and carbon nanotubes triggers their mutual role in the enhanced photodegradation of: P -chloroaniline. Physical Chemistry Chemical Physics, 18 (17). pp. 12323-12331. ISSN 1463-9076

Salleh, F. M. and Mariotti, L. and Spadafora, N. D. and Price, A. M. and Picciarelli, P. and Wagstaff, C. and Lombardi, L. and Rogers, H. (2016) Interaction of plant growth regulators and reactive oxygen species to regulate petal senescence in wallflowers (Erysimum linifolium). BMC Plant Biology, 16 (1). ISSN 1471-2229

Yusof, N. and Zurita-Milla, R. and Kraak, M. J. and Retsios, B. (2016) Interactive discovery of sequential patterns in time series of wind data. International Journal of Geographical Information Science, 30 (8). pp. 1486-1506. ISSN 1365-8816

Ramakrishnan, S. and Hishan, S. S. and Nabi, A. A. and Arshad, Z. and Kanjanapathy, M. and Zaman, K. and Khan, F. (2016) An interactive environmental model for economic growth: evidence from a panel of countries. Environmental Science and Pollution Research, 23 (14). pp. 14567-14579. ISSN 0944-1344

Mohammed, S. B. and Idris, N. H. and Idris, N. H. (2016) Intercomparison between retracked sea levels from SARAL/AltiKa satellite altimetry and ocean data model over the maginal seas at the South East Asia. International Journal of Geoinformatics, 12 (2). pp. 27-32. ISSN 1686-6576

Bernardo, A. B. I. and Salanga, M. G. C. and Khan, A. and Yeung, S. S. (2016) Internal and external loci-of-hope predict use of individual and collaborative learning strategies: evidence from University students in four Asian cities. Asia-Pacific Education Researcher, 25 (3). pp. 367-376. ISSN 0119-5646

Yusuf, G. O. and Sukati, I. and Andenyang, I. (2016) Internal marketing practices and customer orientation of employees in Nigeria banking sector. International Review of Management and Marketing, 6 (4). pp. 217-223. ISSN 2146-4405

Shahijan, M.K. and Rezaei, S. and Amin, M. (2016) International students’ course satisfaction and continuance behavioral intention in higher education setting: an empirical assessment in Malaysia. Asia Pacific Education Review, 17 (1). pp. 41-62. ISSN 1598-1037

Yeo, Kee Jiar and Lu, Xi (2016) Internet use among undergraduate students. Man in India, 96 (6). pp. 1787-1792. ISSN 0025-1569

Mahadi, N. and Ibrahim, I. F. and Yaakop, A. Y. and Ariffin, Z. Z. (2016) Internet-of-Things (IoT) as engine of growth for the economy. International Business Management, 10 (17). pp. 3807-3811. ISSN 1993-5250

Nazir, T. and Ungku Ahmed, U. N. (2016) Interrelationship of incivility, cynicism and turnover intention. International Review of Management and Marketing, 6 (1). pp. 146-154. ISSN 2146-4405

Beringer, J. and Hutley, L. B. and McHugh, I. and Arndt, S. K. and Campbell, D. and Cleugh, H. A. and Cleverly, J. and De Dios, V. R. and Eamus, D. and Evans, B. and Ewenz, C. and Grace, P. and Griebel, A. and Haverd, V. and Hinko Najera, N. and Huete, A. and Isaac, P. and Kanniah, K. and Leuning, R. and Liddell, M. J. and MacFarlane, C. and Meyer, W. and Moore, C. and Pendall, E. and Phillips, A. and Phillips, R. L. and Prober, S. M. and Restrepo Coupe, N. and Rutledge, S. and Schroder, I. and Silberstein, R. and Southall, P. and Sun Yee, M. and Tapper, N. J. and Van Gorsel, E. and Vote, C. and Walker, J. and Wardlaw, T. (2016) An introduction to the Australian and New Zealand flux tower network OzFlux. Biogeosciences, 13 (21). 5895 5916. ISSN 1726-4170

Farzana, Quoquab Habib and Nor, Liza Abdullah and Dhahi Al-Nusairat, Jihad Mohammad (2016) Investigating the effect of consumer innovativeness, service quality and service switching cost on service loyalty in the mobile phone service context. Gadjah Mada International Journal of Business, 18 (1). pp. 21-53. ISSN 1141-1128

Ghasemi, M. and Kandar, M. Z. and Noroozi, M. (2016) Investigating the effect of well geometry on the daylight performance in the adjoining spaces of vertical top-lit atrium buildings. Indoor and Built Environment, 25 (6). pp. 934-948. ISSN 1420-326X

Ozturk, I. and Al Mulali, U. and Saboori, B. (2016) Investigating the environmental Kuznets curve hypothesis: the role of tourism and ecological footprint. Environmental Science and Pollution Research, 23 (2). pp. 1916-1928. ISSN 0944-1344

Musa, F. N. and Bashir, N. and Ahmad, M. H. and Buntat, Z. and Piah, M. A. M (2016) Investigating the influence of plasma-treated SiO2 nanofillers on the electrical treeing performance of silicone-rubber. Applied Sciences (Switzerland), 6 (11). pp. 1-12. ISSN 2076-3417

Othman, R. and Shahrill, M. and Mundia, L. and Tan, A. and Huda, M. (2016) Investigating the relationship between the student's ability and learning preferences: evidence from year 7 mathematics students. New Educational Review, 44 (2). pp. 125-138. ISSN 1732-6729

Yusoff, R. B. M. and Imran, A. and Qureshi, M. I. and Kazi, A. G. (2016) Investigating the relationship of employee empowerment and sustainable manufacturing performance. International Review of Management and Marketing, 6 (4). pp. 284-290. ISSN 2146-4405

Rafieizonooz, M. and Mirza, J. and Salim, M. R. and Hussin, M. W. and Khankhaje, E. (2016) Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement. Construction and Building Materials, 116 . pp. 15-24. ISSN 0950-0618

Wong, Ee Ting and Chan, Kian Hwa and Irfan, Muhammad and Idris, Ani (2016) Investigation of Cu(II) removal by cobalt-doped iron oxide captured in PVA-alginate beads. Desalination and Water Treatment, 57 (5). pp. 2052-2063. ISSN 19443994

Setiawan Putra, A. W. and Makinoshima, K. and Yamada, M. and Takashima, T. and Ambran, S. (2016) Investigation of frequency noise and spectrum linewidth in semiconductor optical amplifier. Jurnal Teknologi, 78 (3). pp. 155-165. ISSN 0127-9696

Zainol, F. N. and Dollah, M. S. and Ahmad, M. R. and Abd Rahman, S. F. (2016) Investigation of graphene channel interaction with yeast cell for cell counting application. Jurnal Teknologi, 78 (7-5). pp. 83-87. ISSN 0127-9696

Zamanirad, Sirous and Seif, Mohammad Saeed and Tabeshpur, Mohammad Reza and Yaakob, Omar (2016) Investigation of hydroelastic effect in analysis of high-speed craft. Ships and Offshore Structures, 11 (1). pp. 16-24. ISSN 1744-5302

Izhan, I. M. and Syahrullail, S. and Yong, S. Y. and Nurul, M. A. (2016) Investigation of micro-pits formation on billet surfaces in plane strain extrusion. Jurnal Teknologi, 78 (10-2). pp. 39-45. ISSN 0127-9696

Shah, S. M. A. and Abd. Latiff, M. S. and Chowdhry, B. S. and Riaz, T. (2016) Investigation of single beam near-infrared free space optical communication under different weather anomalies. ARPN Journal of Engineering and Applied Sciences, 11 (9). pp. 5732-5738. ISSN 1819-6608

Mansourizadeh, K. and Ahmad, U. K. (2016) An investigation of source use strategies in published research articles and graduate students research papers. Asian ESP Journal, 12 (1). pp. 148-182. ISSN 1833-3001

Mohd Amin, M. A. I. and Ahmed, R. and Shaari, A. and Ul-Haq, B. and Mohamad, M. and Muhamad, M. N. (2016) Investigation of structural, electronic and thermoelectric properties of XCUOTE (X: BI, CE, LE) with GGA-WC exchange correlation functional. Jurnal Teknologi, 78 (3). pp. 105-110. ISSN 0127-9696

Rodzalan, Shazaitul Azreen and Mohd. Arif, Lily Suriani and Mohamed Saat, Maisarah (2016) An investigation of students communication skill development: pre and post industrial training. Man in India, 96 (1-2). pp. 513-524. ISSN 0025-1569

Rodzalan, Shazaitul Azreen and Mohd. Arif, Lily Suriani and Mohamed Saat, Maisarah (2016) An investigation of students' communication skill development: pre and post industrial training. Man in India, 96 (1-2). pp. 513-524. ISSN 0025-1569

Zaki, S. A. and Jaafar, A. Z. and Mohammad, A. F. and Ali, M. S. M. and Abd. Razak, A. (2016) Investigation of surface roughness impact on mean wind flow using RNG k-e model. Jurnal Teknologi, 78 (9). pp. 21-28. ISSN 0127-9696

Rezaei-Dasht Arzhandi, M. and Ismail, A. F. and Ghanbari, M. and Bakeri, G. and Hashemifard, S. A. and Matsuura, T. and Moslehyani, A. (2016) An investigation of temperature effects on the properties and CO2 absorption performance of porous PVDF/montmorillonite mixed matrix membranes. Journal of Natural Gas Science and Engineering, 31 . pp. 515-524. ISSN 1875-5100

Zainal, M. T. and Mohd. Yasin, M. F. and Wahid, M. A. (2016) Investigation of the coupled effects of temperature and partial pressure on catalytic growth of carbon nanotubes using a modified growth rate model. Materials Research Express, 3 (10). ISSN 2053-1591

Mansur, S. and Othman, M. H. D. and Ismail, A. F. and Sheikh Abdul Kadir, S. H. and Kamal, F. and Goh, P. S. and Hasbullah, H. and Ng, B. C. and Abdullah, M. S. (2016) Investigation on the effect of spinning conditions on the properties of hollow fiber membrane for hemodialysis application. Journal of Applied Polymer Science, 133 (30). ISSN 0021-8995

Yazid, I. I. M. and Mazlan, S. A. and Imaduddin, F. and Zamzuri, H. and Choi, S. B. and Kikuchi, T. (2016) An investigation on the mitigation of end-stop impacts in a magnetorheological damper operated by the mixed mode. Smart Materials and Structures, 25 (12). ISSN 0964-1726

Zahari, Muhammad Azahar Zikri and Majid, M. Rafee and Siong, Ho Chin and Kurata, Gakuji and Nordin, Nadhirah (2016) An investigation on the relationship between land use composition and pm10 pollution in Iskandar Malaysia. Planning Malaysia, 4 (Specia). pp. 395-410. ISSN 1675-6215

Wahidin, Suzana and Idris, Ani and Muhamad Shaleh, Sitti Raehanah (2016) Ionic liquid as a promising biobased green solvent in combination with microwave irradiation for direct biodiesel production. Bioresource Technology, 206 . pp. 150-154. ISSN 0960-8524

Moghimi, V. and Jusan, M. B. M. and Izadpanahi, P. (2016) Iranian household values and perception with respect to housing attributes. Habitat International, 56 . pp. 74-83. ISSN 0197-3975

Mad Kaidi, H. and Ahmad, N. and Mohd. Izhar, M. A. and Mohd. Sam, S. and Fisal, N. (2016) Irregular repetition code hybrid ARQ in wireless system. Jurnal Teknologi, 78 (6-2). pp. 1-6. ISSN 0127-9696

Nakhaei, H. and Hamid, N. I. N. and Anuar, M. A. and Nakhaei, K. (2016) Is refined economic value added more associated with stock return than accounting measures? The Malaysian evidence. Society and Economy, 38 (1). pp. 69-85. ISSN 1588-9726

Phang, F. A. and Wong, W. Y. and Ho, C. S. and Musa, A. N. and Fujino, J. and Suda, M. (2016) Iskandar Malaysia Ecolife Challenge: low-carbon education for teachers and students. Clean Technologies and Environmental Policy, 18 (8). pp. 2525-2532. ISSN 1618-954X

Jamshidi, D. and Hussin, N. (2016) Islamic credit card adoption understanding: when innovation diffusion theory meets satisfaction and social influence. Journal of Promotion Management, 22 (6). pp. 897-917. ISSN 1049-6491

Zain, N. A. M. and Zargoun, L. M. A. and Elias, N. F. and Wahab, M. F. A. and Suhaimi, M. S. (2016) Isolation and characterization of polyhydroxyalkanoates (PHAS) producing bacteria from brackish stream. Jurnal Teknologi, 78 (7). pp. 75-81. ISSN 0127-9696

Kasan, N. A. and Che Teh, M. F. A. and Ghazali, N. A. and Che Hashim, N. F. and Ibrahim, Z. and Amin, N. M. (2016) Isolation of bioflocculant-producing bacteria from Penaeus vannamei ponds for the production of extracellular polymeric substances. AACL Bioflux, 9 (6). pp. 1233-1243. ISSN 1844-8143

Mohamad Noor, Nur Farhanah and Mohd. Sirat, Hasnah (2016) Isolation, characterization and modification of zerumbone from zingiber zerumbet. E-Proceedings Chemistry, 1 (1). pp. 7-10. ISSN 2550-1453

Abdul Rahman, Azizah and Abu Hasan, Nooradilla and A. Lahad, Norminshah (2016) Issues and challenges in business intelligence case studies. Jurnal Teknologi, 78 (8-2). pp. 171-178. ISSN 0127-9696

Arshad, M. U. and Yusoff, M. E. and Tahir, M. S. (2016) Issues in transformation from conventional banking to islamic banking. International Journal of Economics and Financial Issues, 6 (3). pp. 220-224. ISSN 2146-4138

Akbari, E. and Buntat, Z. and Nilashi, M. and Afroozeh, A. and Farhang, Y. and Zeinalinezhad, A. (2016) ISVR modeling of an interferon gamma (IFN-γ) biosensor based on graphene. Analytical Methods, 8 (39). pp. 7217-7224. ISSN 1759-9660

Ilias, Mohd. Faeez and Abdullah, Murihah and Husain, Kalthom and Jasmi, Kamarul Azmi and Abdullah, Abdul Hafiz and Rosman, Arieff Salleh (2016) Jenis-jenis sumber pengetahuan guru Pendidikan Islam dalam penggunaan bahan bantu mengajar di Sekolah Bestari. e-Jurnal Penyelidikan dan Inovasi, 3 (2-1). pp. 41-55. ISSN 2289-7909

Mehmood, Nasir and Ungku Ahmad, Ungku Norulkamar and Irum, Sobia and Ashfaq, Muhammad (2016) Job satisfaction, affective commitment, and turnover intentions among front desk staff: evidence from Pakistan. International Review of Management and Marketing, 6 (4). pp. 305-309. ISSN 2146-4405

Nilchian, Masih and Bostan, Emrah and Wang, Zhentian and Nilchiyan, Mohammad Reza and Stampanoni, Marco and Unser, Michael (2016) Joint absorption and phase retrieval in grating-based x-ray radiography. Optics Express, 24 (7). pp. 7253-7265. ISSN 1094-4087

Orikumhi, Igbafe and Leow, Chee Yen (2016) Joint power allocation for DF concatenated MIMO successive relaying scheme under network power constraints. Jurnal Teknologi, 78 (5-7). pp. 43-48. ISSN 0127-9696

Abidin, U. and Yunas, J. and Majlis, B. Y. (2016) Joule heating effect reduction of an electromagnet system utilizing on-chip magnetic core. Jurnal Teknologi, 78 (8-4). pp. 105-112. ISSN 0127-9696

Ahmadi, F. and Hussin, R. and Ghoshal, S. K. (2016) Judd-Ofelt intensity parameters of samarium-doped magnesium zinc sulfophosphate glass. Journal of Non-Crystalline Solids, 448 . pp. 43-51. ISSN 0022-3093

Rahman, T. and Nawabjan, A. and Tarazona, A. and Bagnall, D. M. and Boden, S. A. (2016) Junction formation with HWCVD and TCAD model of an epitaxial back contact solar cell. IEEE Journal of Photovoltaics, 6 (6). pp. 1396-1402. ISSN 2156-3381

Hamdan, Nazirah and Jasmi, Kamarul Azmi (2016) Kajian kes tempat perlaksanaan pengajaran dan pembelajaran Pendidikan Islam Sekolah Menengah Rendah di Johor. Sains Humanika, 8 (3-2). pp. 55-61. ISSN 2289-6996

Mohamed Zuhaini, Putri 'Amirah 'Izzatul Iman and Abdullah, Fatin Aliah Phang (2016) Kemahiran berfikir secara kritis dan pencapaian fizik pelajar sekolah luar bandar dan bandar di johor bahru. Buletin PPSMJ, 26 (2). pp. 3-16. ISSN 0128-4290

Mohd. Amin, Siti Hajar and Ismail, Sarimah (2016) Keperluan pembinaan struktur kurikulum kursus penghasilan dan pengkomersilan makanan. Jurnal Pendidikan Teknik dan Vokasional, 6 (1). pp. 113-124. ISSN 1985-6652

Raja Mamat, T. N. A. and Mat Saman, M. Z. and Sharif, S. and Simic, V. (2016) Key success factors in establishing end-of-life vehicle management system: a primer for Malaysia. Journal of Cleaner Production, 135 . pp. 1289-1297. ISSN 0959-6526

Davazdah Emami, S. and Kasmani, R. M. and Hamid, M. D. and Che Hassan, C. R. and Mokhtar, K. M. (2016) Kinetic and dynamic analysis of hydrogen-enrichment mixtures in combustor systems - a review paper. Renewable and Sustainable Energy Reviews, 62 . pp. 1072-1082. ISSN 1364-0321

Asli, Umi Aisah and Nwaha, Isah and Hamid, Hazirah and Zakaria, Zainul Akmar and Sadikin, Aziatul Niza and Kamaruddin, Mohd. Johari (2016) A kinetic study of enzymatic hydrolysis of oil palm biomass for fermentable sugar using polyethylene glycol (PEG) immobilized cellulase. Jurnal Teknologi, 78 (8-3). pp. 51-57. ISSN 0127-9696

Ramli, N. A. S. and Amin, N. A. S. (2016) Kinetic study of glucose conversion to levulinic acid over Fe/HY zeolite catalyst. Chemical Engineering Journal, 283 . pp. 150-159. ISSN 1385-8947

Khani, Mojtaba and Saidina Amin, Nor Aishah and Hosseini, Seyed Nezamedin and Heidarrezaei, Mahshid (2016) Kinetics study of the photocatalytic inactivation of Escherichia coli. International Journal of Nano and Biomaterials, 6 (3-4). pp. 139-150. ISSN 1752-8933

Almudallal, Abdullah Waleed and Muktar, Syaharizatul Noorizwan and Bakri, Norhani (2016) Knowledge management in the Palestinian higher education: a research agenda. International Review of Management and Marketing, 6 (4). pp. 91-100. ISSN 2146-4405

Musa, Mahdi Alhaji and Othman, Mohd. Shahizan (2016) Knowledge map and enterprise ontology for enhancing business process reengineering in healthcare: a case of radiology department. International Journal of Enterprise Information Systems, 12 (2). pp. 26-46. ISSN 1548-1115

Abdullah, M. E. and Hainin, M. R. and Yusoff, N. I. Md. and Zamhari, K. A. and Hassan, N. (2016) Laboratory evaluation on the characteristics and pollutant emissions of nanoclay and chemical warm mix asphalt modified binders. Construction and Building Materials, 113 . pp. 488-497. ISSN 0950-0618

Mohamad, Izni Izzati and Mohd. Yunus, Mohd. Zulkifli and Ahmad, Fatimah Shafinaz (2016) Landfill site selection by integrating analytical hierarchy process and geographic information system. Malaysian Journal Of Civil Engineering - MJCE, 28 (SINO.3). pp. 180-191. ISSN 1823-7843

Padfield, R. and Drew, S. and Syayuti, K. and Page, S. and Evers, S. and Campos-Arceiz, A. and Kangayatkarasu, N. and Sayok, A. and Hansen, S. and Schouten, G. and Maulidia, M. and Papargyropoulou, E. and Tham, M. H. (2016) Landscapes in transition: an analysis of sustainable policy initiatives and emerging corporate commitments in the palm oil industry. Landscape Research, 41 (7). pp. 744-756. ISSN 0142-6397

Abdul Razak, Noor Zainab and Nordin, Latipah (2016) Language learning styles of engineering and non-engineering students at private institution of higher education in Malaysia. Man in India, 96 (1-2). pp. 567-578. ISSN 0025-1569

Al-Samman, A. M. and Rahman, T. A. and Azmi, M. H. and Hindia, M. N. (2016) Large-scale path loss models and time dispersion in an outdoor line-of-sight environment for 5G wireless communications. AEU - International Journal of Electronics and Communications, 70 (11). pp. 1515-1521. ISSN 1434-8411

Almabrouk Imrigha, N. A. and Suan, L. P. and Islam, S. and Krishnan, G. and Bidin, N. (2016) Laser tattoo removal comparison between 1064 and 532 NM of a Q-switched ND:YAG laser treatment. Jurnal Teknologi, 78 (3). pp. 199-202. ISSN 0127-9696

Mohd Badroldin, Mohd Khairul Anas and Abdul Hamid, Abdul Rahim and Abdul Raman, Syazwani and Zakaria, Rozana and Saeed, Reza Mohandes (2016) Late payment practices in the malaysian construction industry. Malaysian Journal Of Civil Engineering (MJCE), 28 (3). pp. 149-162. ISSN 1823-7843

Mahapatra, Geetimukta and Maurya, Akhilesh Kumar and Minhans, Anil (2016) Lateral movement of vehicles under weak-lane discipline heterogeneous traffic. Jurnal Teknologi, 78 (4). pp. 27-35. ISSN 0127-9696

Sidik, N. A. C. and Yazid, M. N. A. W. M. and Samion, S. and Musa, M. N. and Mamat, R. (2016) Latest development on computational approaches for nanofluid flow modeling: Navier-Stokes based multiphase models. International Communications in Heat and Mass Transfer, 74 . pp. 114-124. ISSN 0735-1933

Libunao, Wilfredo Herrera and Wan Muda, Wan Hanim Nadrah and Abdul Latif, Adibah and Peter, Crystal Joan (2016) Leaders credibility, organisation and capability: leadership skills as a mediator. Man in India, 96 (1-2). pp. 183-193. ISSN 0025-1569

Yasir, M. and Imran, R. and Irshad, M. K. and Mohamad, N. A. and Khan, M. M. (2016) Leadership styles in relation to employees' trust and organizational change capacity: evidence from non-profit organizations. SAGE Open, 6 (4). ISSN 2158-2440

Permana, Ariva Sugandi and Abd. Aziz, Norsiah and Siong, Ho Chin (2016) Leadership styles: incentive or disincentive approach in addressing street vendor problems in Jakarta and Bandung, Indonesia. Planning Malaysia, 4 (Specia). pp. 45-60. ISSN 1675-6215

Tan, Owee Kowang and Yong, Tan Su and Md. Rasli, Amran and Choi, Sang Long (2016) Lean six sigma sustainability framework: a case study on an automotive company. Asian Journal of Scientific Research, 9 (5). pp. 279-283. ISSN 1992-1454

Tan, Owee Kowang and Tan, Su Yong and Md. Rasli, Amran and Choi, Sang Long (2016) Lean six sigma sustainability framework: a case study on an automotive company. Asian Journal of Scientific Research, 9 (5). pp. 279-283. ISSN 1992-1454

Habidin, Nurul Fadly and Mohd. Yusof, Sha'ri and Mohd. Fuzi, Nursyazwani (2016) Lean six sigma, strategic control systems, and organizational performance for automotive suppliers. International Journal of Lean Six Sigma, 7 (2). pp. 110-135. ISSN 2040-4166

Surif, Johari and Ibrahim, Nor Hasniza and Abdullah, Abdul Halim and Ali, Marlina (2016) Learning space to support the effectiveness of student-centered learning implementation in Higher Education. 2016 IEEE International Conference on Teaching and Learning in Education, 1 (6). pp. 1-6. (In Press)

Sulaiman, Nuraini Hidayah and Ghazali, Masitah (2016) Learning through playing for children with cerebral palsy. Jurnal Teknologi, 78 (2-2). pp. 63-72. ISSN 0127-9696

Nik Abd. Malik, N. and Esa, M. and Latiff, N. M. A. (2016) Least-square collaborative beamforming linear array for steering capability in green wireless sensor networks. Journal of Electronic Science and Technology, 14 (2). pp. 118-125. ISSN 1674-862X

Mohd. Yusof, Khairunnisa and Isaak, Suhaila and Ngajikin, Nor Hafizah and Che Abd. Rashid, Nurfatihah (2016) LED based soil spectroscopy. Buletin Optik, 3 (1). pp. 1-7. ISSN 2504-8546

Omar, Marlissa and Ali, Dayana Farzeeha (2016) The level of visualization skills among engineering student in Universiti Teknologi Malaysia. Man in India, 96 (1-2). pp. 427-431. ISSN 0025-1569

Kanestion, A. and Singh, M. K. S. and Shamsudin, S. and Isam, H. and Kaur, N. and Singh, G. S. P. (2016) Lexical verbs in Malaysian university english test argumentative essays: a corpus-based structural analysis. International Review of Management and Marketing, 6 (8Speci). pp. 13-17. ISSN 2146-4405

Muhsen, L. and Maan, N. (2016) Lie group analysis of second-order non-linear neutral delay differential equations. Malaysian Journal of Mathematical Sciences, 10 . pp. 117-129. ISSN 1823-8343

Ismail, M. and Yew, C. K. and Muhammad, B. (2016) Life-span prediction of abandoned reinforced concrete residential buildings. Construction and Building Materials, 112 . pp. 1059-1065. ISSN 0950-0618

Tanko, Y. A. and Ghoshal, S. K. and Sahar, M. R. (2016) Ligand field and Judd-Ofelt intensity parameters of samarium doped tellurite glass. Journal of Molecular Structure, 1117 . pp. 64-68. ISSN 0022-2860

Darwish, T. and Abu Bakar, K. (2016) Lightweight intersection-based traffic aware routing in Urban vehicular networks. Computer Communications, 87 . pp. 60-75. ISSN 0140-3664

Wan Sulaiman, Wan Rosli and Azza, Hashim Abbas and Jaafar, Mohd. Zaidi and Ahmad, Kamal Idris (2016) Lignin black liquor in chemical enhanced oil recovery: a review for sacrificial agent. Journal of Petroleum & Environmental Biotechnology, 7 (5). pp. 1-4. ISSN 2157-7463

Lazim, Z. M. and Hadibarata, T. (2016) Ligninolytic fungus Polyporus sp. S133 mediated metabolic degradation of fluorene. Brazilian Journal of Microbiology, 47 (3). pp. 610-616. ISSN 1517-8382

Musa, A. and Saeed, M. A. and Shaari, A. and Sahnoun, R. and Lawal, M. and Munir, J. (2016) Linear acenes linked thiophene, electronic and chemical properties: Prospects for molecular organic electronic material. Jurnal Teknologi, 78 (6-11). pp. 67-72. ISSN 0129696

Sulaiman, S. F. and Rahmat, M. F. and Faudzi, A. A. M. and Osman, K. (2016) Linear and nonlinear arx model for intelligent pneumatic actuator systems. Jurnal Teknologi, 78 (6). pp. 21-28. ISSN 0127-9696

Mohamed, Z. and Khairudin, M. and Husain, A. R. and Subudhi, B. (2016) Linear matrix inequality-based robust proportional derivative control of a two-link flexible manipulator. JVC/Journal of Vibration and Control, 22 (5). pp. 1244-1256. ISSN 1077-5463

Tang, Jia Wei and Shaikh-Husin, Nasir and Sheikh, Usman Ullah and Marsono, Muhammad Nadzir (2016) A linked list run-length-based single-pass connected component analysis for real-time embedded hardware. Journal of Real-Time Image Processing . pp. 1-19. ISSN 1861-8200 (In Press)

Leaw, W. L. and Mamat, C. R. and Triwahyono, S. and Jalil, A. A. and Bidin, N. (2016) Liquid crystal physical gel formed by cholesteryl stearate for light scattering display material. Journal of Colloid and Interface Science, 483 . pp. 41-48. ISSN 0021-9797

Abdullah, Iqra and Omar, Rozeyta and Panatik, Siti Aisyha (2016) A literature review on personality, creativity and innovative behavior. International Review of Management and Marketing, 6 (1). pp. 177-182. ISSN 2146-4405

Masud, Muhammad Mehedi and Kari, Fatimah and Yahaya, Siti Rohani and Al-Amin, Abul Quasem (2016) Livelihood assets and vulnerability context of Marine Park Community Development in Malaysia. Social Indicators Research, 125 (3). pp. 771-792. ISSN 0303-8300

Kolivand, H. and Billinghurst, M. and Sunar, M. S. (2016) LivePhantom: retrieving virtual world light data to real environments. PLoS ONE, 11 (12). ISSN 1932-6203

Ahmed, Mukhtiar and Salleh, Mazleena (2016) Localization schemes in underwater sensor network (UWSN): a survey. Telkomnika Indonesian Journal of Electrical Engineering, 17 (1). pp. 119-125. ISSN 2502-4752

Jaffar, Jasrina and Syed Yusof, Sharifah Kamilah and Ahmad, Norulhusna and Che Mustapha, Jawahir (2016) Location assisted proactive channel in heterogeneous Cognitive Radio Network. Journal of Telecommunication Electronic and Computer Engineering, 8 (3). pp. 49-53. ISSN 2180-1843

Yahaya, F. M. and Muthusamy, K. and Hussin, M. W. (2016) Long term investigation on sulphate resistance of aerated concrete containing palm oil fuel ash. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2406-2411. ISSN 1819-6608

Ali Alsofyani, Ibrahim Mohd. and Nik Idris, Nik Rumzi (2016) Lookup-table-based dtc of induction machines with improved flux regulation and extended kalman filter state estimator at low- speed operation. IEEE Transactions on Industrial Informatics, 12 (4). pp. 1412-1425. ISSN 1551-3203

Alsofyani, I. M. and Idris, N. R. N. (2016) Lookup-table-based DTC of induction machines with improved flux regulation and extended Kalman filter state estimator at low-speed operation. IEEE Transactions on Industrial Informatics, 12 (4). pp. 1412-1425. ISSN 1551-3203

Abdullah, Fatin Aliah Phang and Yoke, Wong Wai and Siong, Ho Chin and Musa, Aerma Nurazalina and Safri, Isma Ezwan and Suda, Maiko (2016) Low carbon awareness among primary school students through iskandar Malaysia ecolife challenge competition. Man in India, 96 (1-2). pp. 387-395. ISSN 0025-1569

Tang, C. H. H. and Tang, H. E. and Tay, P. K. J. (2016) Low cost digital close range photogrammetric measurement of an as-built anchor handling tug hull. Ocean Engineering, 119 . pp. 67-74. ISSN 0029-8018

Zainal, N. A. and Yamada, Y. and Kamarudin, M. R. (2016) Low sidelobe and wideband characteristics of density tapered arrays for 5G mobile systems. Jurnal Teknologi, 78 (6-2). pp. 71-76. ISSN 0127-9696

Lee, Chew Tin and Hashim, Haslenda and Chin, Siong Ho and Klemes, Jiri Jaromir (2016) Low-carbon Asia: technical contributions to an ambitious goal for sustainability. Clean Technologies and Environmental Policy, 18 (8). pp. 2335-2336. ISSN 1618-954X

Sarafi, S. and Aain, A.K.B. and Abbaszadeh, J. (2016) Low-voltage CMOS switch for high-speed rail-to-rail sampling. Circuits, Systems, and Signal Processing, 35 (3). pp. 771-790. ISSN 0278-081X

Abbas, Naveed and Saba, Tanzila and Mohamad, Dzulkifli and Rehman, Amjad and Almazyad, Abdulaziz Suleiman and Al-Ghamdi, Jarallah Saleh (2016) Machine aided malaria parasitemia detection in Giemsa-stained thin blood smears. Neural Computing and Applications . pp. 1-16. ISSN 0941-0643 (In Press)

Salleh, W.M.N.H.W. and Ahmad, F. and Yen, K.H. and Zulkifli, R.M. and Sarker, S.D. (2016) Madangones A and B: two new neolignans from the stem bark of Beilschmiedia madang and their bioactivities. Phytochemistry Letters, 15 . pp. 168-173. ISSN 1874-3900

Hajalilou, A. and Mazlan, S. A. and Shila, S. T. (2016) Magnetic carbonyl iron suspension with Ni-Zn ferrite additive and its magnetorheological properties. Materials Letters, 181 . pp. 196-199. ISSN 0167-577X

Nodeh, H. R. and Wan Ibrahim, W. A. and Sanagi, M. M. (2016) Magnetic graphene oxide as adsorbent for the removal of lead(II) from water samples. Jurnal Teknologi, 78 (3-2). pp. 25-30. ISSN 0127-9696

Nadeem, M. and Ahmad, M. and Akhtar, M. S. and Shaari, A. and Riaz, S. and Naseem, S. and Masood, M. and Saeed, M. A. (2016) Magnetic properties of polyvinyl alcohol and doxorubicine loaded iron oxide nanoparticles for anticancer drug delivery applications. PLoS ONE, 11 (6). ISSN 1932-6203

Kassim, Mohamad Nizam and Maarof, Mohd. Aizaini and Zainal, Anazida and Abdul Wahab, Amirudin (2016) Malay word stemmer to stem standard and slang word patterns on social media. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 9714 L . pp. 391-400. ISSN 0302-9743

Khei, Khei and Khei, Y. M. and Lee, Y. and Razak, N. Z. B. A. (2016) Malaysia Chinese independent high schools esl learners english learning attitudes. Man in India, 96 (6). pp. 1659-1665. ISSN 0025-1569

Ramli, M. Z. and Adnan, A. (2016) Malaysian bridges and the influence of Sumatran earthquake in bridge design. Malaysian Construction Research Journal, 18 (1). pp. 123-134. ISSN 1985-3807

Madam, A. and Yusof, R. (2016) Malaysian traffic sign dataset for traffic sign detection and recognition systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 137-143. ISSN 2180-1843

Hussien, Nur Syahela and Sulaiman, Sarina and Shamsuddin, Siti Mariyam (2016) Management system prototype for intelligent mobile cloud computing for big data. Journal Teknologi, 78 (12-2). pp. 19-28. ISSN 0127-9696

Majid, M. R. and Jaffar, A. R. and Man, N. C. and Vaziri, M. and Sulemana, M. (2016) Mapping poverty hot spots in Peninsular Malaysia using spatial autocorrelation analysis. Planning Malaysia, 4 (Specia). pp. 1-16. ISSN 1675-6215

Zabihi, H. and Vogeler, I. and Amin, Z. M. and Gourabi, B. R. (2016) Mapping the sensitivity of citrus crops to freeze stress using a geographical information system in Ramsar, Iran. Weather and Climate Extremes, 14 . pp. 17-23. ISSN 2212-0947

Hossain, M. S. and Bujang, J. S. and Zakaria, M. H. and Hashim, M. (2016) Marine and human habitat mapping for the Coral Triangle Initiative region of Sabah using Landsat and Google Earth imagery. Marine Policy, 72 . pp. 176-191. ISSN 0308-597X

Anis, S. N. M. and Hashim, N. H. and Rasli, A. M. (2016) Marketing for non-marketers: inclinations towards market orientation among public university librarians. International Review of Management and Marketing, 6 (4). pp. 143-149. ISSN 2146-4405

Siah, Wai Ruu and Lintang, Hendrik Oktendy and Shamsuddin, Mustaffa and Yoshida, Hisao and Yuliati, Leny (2016) Masking effect of copper oxides photodeposited on titanium dioxide: exploring uv, visible, and solar light activity. Catalysis Science & Technology, 6 (13). pp. 5079-5087. ISSN 2044-4753

Haneem, F. and Kama, N. and Azmi, A. (2016) Master data identification in public sector organisations. Advanced Science Letters, 22 (10). pp. 2999-3003. ISSN 1936-6612

Abdoulmohammad, Gholamzadeh Chofreh and Feybi, Ariani Goni and Ismail, Syuhaida and Awaluddin, Mohamed Shaharoun and Jiri, Jaromir Klemes and Zeinalnezhad, Masoomeh (2016) A master plan for the implementation of sustainable enterprise resource planning systems (part I): concept and methodology. Journal of Cleaner Production, 136 . pp. 176-182. ISSN 0959-6526

Firouzian, S. and Kashefi, H. and Yusof, Y. M. and Ismail, Z. and Rahman, R. A. (2016) Mathematical competencies as perceived by engineering students, lecturers, and practicing engineers. International Journal of Engineering Education, 32 (6). pp. 2434-2445. ISSN 0949-149X

Hamzah, A. S. A. and Banitalebi, A. and Murid, A. H. M. and Aziz, Z. A. and Ramli, H. and Rahman, H. and Hamdon, N. (2016) A mathematical model for wastewater treatment process of an oxidation pond. Jurnal Teknologi, 78 (3-2). pp. 65-70. ISSN 0127-9696

Chua, Lee Suan and Alias, Norma and Januari, Ristian and Mustaffa, Maizatul Nadirah and Ali, Akhtar and Ahmad Kamal, Mohamad Hidayad and Hayat, Imran (2016) Mathematical modeling for contour identification based on medicinal leaves and GIS images. Journal Teknologi, 78 (12-2). pp. 49-55. ISSN 0127-9696

Chaturvedi, Nitin Dutt and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Bandyopadhyay, Santanu (2016) Maximising heat recovery in batch processes via product streams storage and shifting. Journal of Cleaner Production, 112 . pp. 2802-2812. ISSN 0959-6526

Ling, L. and Yusop, Z. (2016) Mean, median or something else. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9706-9711. ISSN 1819-6608

Mohamad, E. J. and Rahim, R. A. and Rahiman, M. H. F. and Ameran, H. L. M. and Muji, S. Z. M. and Marwah, O. M. F. (2016) Measurement and analysis of water/oil multiphase flow using electrical capacitance tomography sensor. Flow Measurement and Instrumentation, 47 . pp. 62-70. ISSN 0955-5986

Kharraz, O. M. and Mohammad, A. B. B. and Forsyth, D. I. and Ahmad, H. (2016) Measurement of fiber non-linearity based on four-wave mixing with an ASE source. Optical Fiber Technology, 32 . pp. 23-29. ISSN 1068-5200

Akib, I. and Akib, E. and Ghafar, M. N. A. and Latif, A. A. (2016) Measuring assessment for learning. Man in India, 96 (1-2). pp. 267-277. ISSN 0025-1569

Banki, Mohammed Bala and Ismail, Hairul Nizam and Danladi, Musa Haruna and Dalil, Musa (2016) Measuring hotels service quality in Nigeria: a case study of Minna Township. Journal of Quality Assurance in Hospitality and Tourism, 17 (1). pp. 71-88. ISSN 1528-008X

Shabbir, A. and Malik, S. A. and Malik, S. A. (2016) Measuring patients’ healthcare service quality perceptions, satisfaction, and loyalty in public and private sector hospitals in Pakistan. International Journal of Quality and Reliability Management, 33 (5). pp. 538-557. ISSN 0265-671X

Dwaikat, L. N. and Ali, K. N. (2016) Measuring the actual energy cost performance of green buildings: a test of the earned value management approach. Energies, 9 (3). ISSN 1996-1073

Abdul Ghani, Siti Waqina and Abu Bakar, Aznizam and Samsudin, S. A. (2016) Mechanical and physical properties of chitosan-compatibilized montmorillonite-filled tapioca starch nanocomposite films. Journal of Plastic Film and Sheeting, 32 (2). pp. 140-162. ISSN 8756-0879

Tanjung, F. A. and Husseinsyah, S. and Hussin, K. and Hassan, A. (2016) Mechanical and thermal properties of organosolv lignin/sodium dodecyl sulphate binary agent-treated polypropylene/chitosan composites. Polymer Bulletin, 73 (5). pp. 1427-1445. ISSN 0170-0839

Mohammadhosseini, H. and Abdul Awal, A. S. M. and Sam, A. R. M. (2016) Mechanical and thermal properties of prepacked aggregate concrete incorporating palm oil fuel ash. Sadhana - Academy Proceedings in Engineering Sciences, 41 (10). pp. 1235-1244. ISSN 0256-2499

Ngadiman, N. H. A. and Mohd. Yusof, N. and Idris, A. and Kurniawan, D. (2016) Mechanical properties and biocompatibility of co-axially electrospun polyvinyl alcohol/maghemite. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 230 (8). pp. 739-749. ISSN 0954-4119

Balakrishnan, Balamohan and Abdul Awal, A. S. M. (2016) Mechanical properties and thermal resistance of high volume fly ash concrete for energy efficiency in building construction. Key Engineering Materials, 678 . pp. 99-108. ISSN 1013-9826

Pour, R. H. and Hassan, A. and Soheilmoghaddam, M. and Bidsorkhi, H. C. (2016) Mechanical, thermal, and morphological properties of graphene reinforced polycarbonate/acrylonitrile butadiene styrene nanocomposites. Polymer Composites, 37 (6). pp. 1633-1640. ISSN 0272-8397

A. Alkelani, Waseem A. and Habil, Hadina (2016) Media coverage on disasters: the present state of affairs. Malaysian Journal of Languages and Linguistics, 5 (2). pp. 1-12. ISSN 2289-8212

Yunus, N. H. and Md. Ariff, M. S. and Mohd. Som, N. and Zakuan, N. and Sulaiman, Z. (2016) The mediating effect of brand image between electronic word of mouth and purchase intention in social media. Advanced Science Letters, 22 (10). pp. 3176-3180. ISSN 1936-6612

Ghasemi, R. and Mohamad, N. A. and Karami, M. and Bajuri, N. H. and Asgharizade, E. (2016) The mediating effect of management accounting system on the relationship between competition and managerial performance. International Journal of Accounting and Information Management, 24 (3). pp. 272-295. ISSN 1834-7649

Chua, K. B. and Quoquab, F. and Mohammad, J. and Basiruddin, R. (2016) The mediating role of new ecological paradigm between value orientations and pro-environmental personal norm in the agricultural context. Asia Pacific Journal of Marketing and Logistics, 28 (2). pp. 323-349. ISSN 1355-5855

Mohd. Noor Azizaman, Nur Mazreen and Md. Ariff, Mohd. Shoki and Zakuan, Norhayati and Mat Saman, Muhamad Zameri (2016) The mediating role of student satisfaction between quality management principles of ISO 9001:2008 and communication behavior in higher education. Social Sciences (Pakistan), 11 (11). pp. 2742-2747. ISSN 1818-5800

Wong, H. F. and Thoo, A. C. and Muharam, F. M. and Sulaiman, Z. (2016) The mediation role of key account management effectiveness on key account management practices and market performance. Social Sciences (Pakistan), 11 (21). pp. 5260-5264. ISSN 1818-5800

Thoo, Ai Chin and Muharam, Farrah Merlinda and Sulaiman, Zuraidah and Wong, Han Fei (2016) The mediation role of key account management effectiveness on key account management practices and market performance. Social Sciences (Pakistan), 11 (21). pp. 5260-5264. ISSN 1818-5800

Tahira, M. and Alias, R. A. and Bakri, A. and Abrizah, A. (2016) Meso-level institutional and journal related indices for Malaysian engineering research. Scientometrics, 107 (2). pp. 521-535. ISSN 0138-9130

Islam, S. and Bidin, N. and Riaz, S. and Suan, L. P. and Naseem, S. and Sanagi, M. M. (2016) Mesoporous nanocomposite coatings for photonic devices: sol-gel approach. Applied Physics A: Materials Science and Processing, 122 (10). ISSN 0947-8396

Ooi, Y. K. and Yuliati, L. and Hartanto, D. and Nur, H. and Lee, S. L. (2016) Mesostructured TUD-C supported molybdena doped titania as high selective oxidative catalyst for olefins epoxidation at ambient condition. Microporous and Mesoporous Materials, 225 . pp. 411-420. ISSN 1387-1811

Mustafa, N. and Ismail, Z. and Tasir, Z. and Mohamad Said, M. N. H. (2016) A meta-analysis on effective strategies for integrated STEM education. Advanced Science Letters, 22 (12). pp. 4225-4288. ISSN 1936-6612

Sattaya-Aphitan, T. and Lichter, H. and Anwar, T. and Tanachutiwat, S. (2016) A meta-model for automatic modeling dynamic web applications. Journal of Theoretical and Applied Information Technology, 84 (2). pp. 203-214. ISSN 1992-8645

Lee, L. Z. and Ahmad Zaini, M. A. (2016) Metal chloride salts in the preparation of activated carbon and their hazardous outlook. Desalination and Water Treatment, 57 (34). pp. 16078-16085. ISSN 1944-3994

Najam, F. and Lau, K. C. and Lim, C. S. and Yu, Y. S. and Tan, M. L. P. (2016) Metal oxide-graphene field-effect transistor: interface trap density extraction model. Beilstein Journal of Nanotechnology, 7 . pp. 1368-1376. ISSN 2190-4286

Othman, S. H. and Beydoun, G. (2016) A metamodel-based knowledge sharing system for disaster management. Expert Systems with Applications, 63 . pp. 49-65. ISSN 0957-4174

Khammas, Ban Mohammed and Monemi, Alireza and Ismail, Ismahani and Mohd. Nor, Sulaiman and Marsono, Muhammad Nadzir (2016) Metamorphic malware detection based on support vector machine classification of malware sub-signatures. Telkomnika (Telecommunication Computing Electronics and Control), 14 (3). pp. 1157-1165. ISSN 1693-6930

Ndejiko, Mohammed Jibrin and Wan Dagang, Wan Rosmiza Zana (2016) Methods and protocol flow cells: technique used for studying microbial biofilms. Jurnal Teknologi, 78 (2). pp. 1-5. ISSN 0127-9696

Qureshi, M. S. and Mohd. Yusoff, Abdull Rahim and Wirzal, Mohd. Dzul Hakim and Sirajuddin, Sirajuddin and Barek, Jiri and Hassan, Imran Afridi and Ustundag, Zafer (2016) Methods for the determination of endocrine-disrupting phthalate esters. Critical Reviews in Analytical Chemistry, 46 (2). pp. 146-159. ISSN 1040-8347

Doraisamy, M. and Ibrahim, S. and Mahrin, M. N. (2016) Metric based software project performance monitoring model. Jurnal Teknologi, 78 (12-3). pp. 51-67. ISSN 0127-9696

Ullah, I. and Khan, I. and Shafie, S. (2016) MHD natural convection flow of casson nanofluid over nonlinearly stretching sheet through porous medium with chemical reaction and thermal radiation. Nanoscale Research Letters, 11 (1). ISSN 1931-7573

Damirchi, H. and Najafi, G. and Alizadehnia, S. and Mamat, R. and Nor Azwadi, C. S. and Azmi, W. H. and Noor, M. M. (2016) Micro Combined Heat and Power to provide heat and electrical power using biomass and Gamma-type Stirling engine. Applied Thermal Engineering, 103 . pp. 1460-1469. ISSN 1359-4311

Sanagi, Mohd. Marsin and Hussain, Iqbal and Wan Ibrahim, Wan Aini and Yahaya, Noorfatimah and Kamaruzaman, Sazlinda and Zainal Abidin, Nurul Nabilah and Ali, Imran (2016) Micro-extraction of Xenobiotics and Biomolecules from different matrices on nanostructures. Separation and Purification Reviews, 45 (1). pp. 28-49. ISSN 1542-2119

Selvan, Krishna Veni and Mohamed Ali, Mohamed Sultan (2016) Micro-scale energy harvesting devices: review of methodological performances in the last decade. Renewable and Sustainable Energy Reviews, 54 . pp. 1035-1047. ISSN 1364-0321

Mohamad Haafiz, M. K. and Hassan, A. and Arjmandi, R. and Zakaria, Z. and Marliana, M. M. and Syakir, M. I. and Nurul Fazita, M. R. (2016) Microcrystalline cellulose from oil palm empty fruit bunches as filler in polylactic acid. Polymers and Polymer Composites, 24 (9). pp. 675-680. ISSN 0967-3911

Venil, C. K. and Khasim, A. R. and Aruldass, C. A. and Ahmad, W. A. (2016) Microencapsulation of flexirubin-type pigment by spray drying: characterization and antioxidant activity. International Biodeterioration and Biodegradation, 113 . pp. 350-356. ISSN 0964-8305

Ahmad Khalili, Amelia and Ahmad, Mohd. Ridzuan and Takeuchi, Masaru and Nakajima, Masahiro and Hasegawa, Yasuhisa and Mohamed Zulkifli, Razauden (2016) A microfluidic device for hydrodynamic trapping and manipulation platform of a single Biological cell. Applied Sciences (Switzerland), 6 (2). pp. 1-17. ISSN 2076-3417

Aurangzaib, Aurangzaib and Sharif Uddin, M. and Bhattacharyya, K. and Shafie, S. (2016) Micropolar fluid flow and heat transfer over an exponentially permeable shrinking sheet. Propulsion and Power Research, 5 (4). pp. 310-317. ISSN 2212-540X

Amiri, I. S. and Soltanian, M. R. K. and Alavi, S. E. and Othman, A. R. and Razak, M. Z. A. and Ahmad, H. (2016) Microring resonator for transmission of solitons via wired/wireless optical communication. Journal of Optics (India), 45 (3). pp. 255-259. ISSN 0972-8821

Daroonparvar, M. and Yajid, M. A. M. and Yusof, N. M. and Bakhsheshi-Rad, H. R. and Hamzah, E. (2016) Microstructural characterisation of air plasma sprayed nanostructure ceramic coatings on Mg–1%Ca alloys (bonded by NiCoCrAlYTa alloy). Ceramics International, 42 (1PartA). pp. 357-371. ISSN 0272-8842

Abbas, M. R. and B., U. M. and Noor, A. M. and Ahmad, N. and Rajoo, S. (2016) Microstructural evaluation of a slurry based Ni/YSZ thermal barrier coating for automotive turbocharger turbine application. Materials and Design, 109 . pp. 47-56. ISSN 0264-1275

Yusof, Norhaniza and Rana, Dipak and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2016) Microstructure of polyacrylonitrile-based activated carbon fibers prepared from solvent-free coagulation process. Journal of Applied Research and Technology, 14 (1). pp. 54-61. ISSN 1665-6423

Hamza, U. D. and Nasri, N. S. and Amin, N. A. S. and Mohammed, J. and Zain, H. M. (2016) Microwave assisted K2CO3 palm shell activated carbon as sorbent for CO2 adsorption application. Jurnal Teknologi, 78 (8-3). pp. 127-136. ISSN 0127-9696

Kamarudin, N. H. N. and Jalil, A. A. and Triwahyono, S. and Timmiati, S. N. (2016) Microwave-assisted synthesis of mesoporous silica nanoparticles as a drug delivery vehicle. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1382-1389. ISSN 1394-2506

Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. and Jayakumar, N. S. and Ganesan, P. (2016) Microwave-assisted synthesis of multi-walled carbon nanotubes for enhanced removal of Zn(II) from wastewater. Research on Chemical Intermediates, 42 (4). pp. 3257-3281. ISSN 0922-6168

Razali, Rasidah and Valavanis, Alexander and Cooper, Jonathan D. and Ikonic, Zoran and Indjin, Dragan M. and Harrison, Paul (2016) Mid-infrared entangled photon generation in optimised asymmetric semiconductor quantum wells. Superlattices and Microstructures, 90 . pp. 107-116. ISSN 0749-6036

Azam, M. and Khan, F. and Zaman, K. and Rasli, A. M. (2016) Military expenditures and unemployment nexus for selected South Asian countries. Social Indicators Research, 127 (3). pp. 1103-1117. ISSN 0303-8300

Piroozfard, Hamed and Wong, Kuan Yew and Wong, Wai Peng (2016) Minimizing total carbon footprint and total late work criterion in flexible job shop scheduling by using an improved multi-objective genetic algorithm. Resources, Conservation and Recycling . ISSN 0921-3449 (In Press)

Kherbeet, A. S. and Mohammed, H. A. and Ahmed, H. E. and Salman, B. H. and Alawi, O. A. and Safaei, M. R. and Khazaal, M. T. (2016) Mixed convection nanofluid flow over microscale forward-facing step — effect of inclination and step heights. International Communications in Heat and Mass Transfer, 78 . pp. 145-154. ISSN 0735-1933 (In Press)

Zaman, B. and Abbas, N. and Riaz, M. and Lee, M. H. (2016) Mixed CUSUM-EWMA chart for monitoring process dispersion. International Journal of Advanced Manufacturing Technology, 86 (9-12). pp. 3025-3039. ISSN 0268-3768

Piroozian, A. and Manan, M. A. and Ismail, I. and Mohsin, R. and Bayat, A. E. and Onuoha, M. D. U. and Hemmati, M. (2016) Mixture temperature prediction of waxy oil-water two-phase system flowing near wax appearance temperature. Chinese Journal of Chemical Engineering, 24 (6). pp. 795-802. ISSN 1004-9541

Piroozian, A. and Manan, M. A. and Ismail, I. and Mohsin, R. and Bayat, A. E. and Onuoha, M. D. U. and Hemmati, M. (2016) Mixture temperature prediction of waxy oil–water two-phase system flowing near wax appearance temperature. Chinese Journal of Chemical Engineering, 24 (6). pp. 795-802. ISSN 1004-9541

Eslahi, M. and Yousefi, M. and Naseri, M. V. and Yussof, Y. M. and Tahir, N. M. and Hashim, H. (2016) Mobile botnet detection model based on retrospective pattern recognition. International Journal of Security and its Applications, 10 (9). pp. 39-54. ISSN 1738-9976

Hussien, Nur Syahela and Sulaiman, Sarina (2016) Mobile cloud computing architecture on data management for big data storage. International Journal of Advances in Soft Computing and its Applications, 8 (2). pp. 139-160. ISSN 2074-8523

Buntat, Y. and Zainuddin, Z. A. and Kadikon, S. and Izran Ishak, M. H. and Ali Khan, M. N. A. (2016) Mobile learning in Malaysia: advantages and problems. Advanced Science Letters, 22 (12). pp. 4007-4009. ISSN 1936-6612

Lee, C. T. and Klemes, J. J. and Hashim, H. and Ho, C. S. (2016) Mobilising the potential towards low-carbon emissions society in Asia. Clean Technologies and Environmental Policy, 18 (8). pp. 2337-2345. ISSN 1618-954X

Ghaleb, Fuad A. and Zainal, Anazida and Rassam, Murad A. (2016) Mobility information estimation algorithm using Kalman-filter for vehicular ad hoc networks. International Journal of Information and Computer Security, 8 (3). pp. 221-240. ISSN 1744-1765

Hasbollah, Arfah and Syed Ariffin, Sharifah Hafizah and Fisal, Norsheila (2016) Mobility prediction method for vehicular network using Markov chain. Jurnal Teknologi, 78 (6-2). pp. 7-13. ISSN 0127-9696

Zubair, Suleiman and Syed Yusoff, Sharifah Kamilah and Fisal, Norsheila (2016) Mobility-enhanced reliable geographical forwarding in cognitive radio sensor networks. Sensors (Switzerland), 16 (2). ISSN 1424-8220

Yang, X. and Borse, R. and Satvat, N. (2016) MOCUM solutions and sensitivity study for C5G7 benchmark. Annals of Nuclear Energy, 96 . pp. 242-248. ISSN 0306-4549

Latiff, A. A. and Shamsudin, H. and Aziz, N. S. A. and Hashim, A. M. and Irawati, N. and Ahmad, H. and Harun, S. W. (2016) Mode-locked generation in thulium-doped fiber linear cavity laser. Optik, 127 (23). pp. 11119-11123. ISSN 0030-4026

Oladokun, O. and Ahmad, A. and Abdullah, T. A. T. and Nyakuma, B. B. and Wong, S. L. (2016) Model free kinetics analysis of Imperata cylindrica (Lalang). Jurnal Teknologi, 78 (8-3). pp. 25-31. ISSN 0127-9696

Sulong, Mohd. Ayub and Belova, I. V. and Boccaccini, A. R. and Murch, G. E. and Fiedler, T. (2016) A model of the mechanical degradation of foam replicated scaffolds. Journal of Materials Science, 51 (8). pp. 3824-3835. ISSN 0022-2461

Ganiyu, Abideen Adekunle and A. Rashid, Ahmad Safuan and Osman, Mohd. Hanim (2016) Model test on the axial capacity of displacement ribbed piles. Jurnal Teknologi, 78 (8-5). pp. 39-45. ISSN 0127-9696

Mienda, B. S. and Shamsir, M. S. and Md. Illias, R. (2016) Model-aided atpE gene knockout strategy in Escherichia coli for enhanced succinic acid production from glycerol. Journal of Biomolecular Structure and Dynamics, 34 (8). pp. 1705-1716. ISSN 0739-1102

Mienda, B.S. and Shamsir, M.S. and Md. Illias, R. (2016) Model-assisted formate dehydrogenase-O (fdoH) gene knockout for enhanced succinate production in Escherichia coli from glucose and glycerol carbon sources. Journal of Biomolecular Structure and Dynamics, 34 (11). pp. 2305-2316. ISSN 0739-1102

Esmaili, E. and Dahlan, H. M. and Desa, M. I. (2016) Model-driven decision support system for estimating number of ambulances required during earthquake disaster relief operation. Journal of Theoretical and Applied Information Technology, 90 (2). pp. 86-94. ISSN 1992-8645

Mienda, B.S. and Shamsir, M.S. and Illias, R.Md. (2016) Model-guided metabolic gene knockout of gnd for enhanced succinate production in Escherichia coli from glucose and glycerol substrates. Computational Biology and Chemistry, 61 . pp. 130-137.

Faudzi, A. A. M. and Mat Lazim, N. H. I. and Suzumori, K. (2016) Modeling and force control of thin soft McKibben actuator. International Journal of Automation Technology, 10 (4). pp. 487-493. ISSN 1881-7629

Phuah, E. T. and Lee, Y. Y. and Tang, T. K. and Lai, O. M. and Choong, T. S. Y. and Tan, C. P. and Ng, W. N. and Lo, S. K. (2016) Modeling and optimization of lipase-catalyzed partial hydrolysis for diacylglycerol production in packed bed reactor. International Journal of Food Engineering, 12 (7). pp. 681-689. ISSN 2194-5764

Md. Sarip, M. S. and Yamashita, Y. and Morad, N. A. and Che Yunus, M. A. and Abdul Aziz, M. K. (2016) Modeling and optimization of the hot compressed water extraction of palm oil using artificial neural network. Journal of Chemical Engineering of Japan, 49 (7). pp. 614-621. ISSN 0021-9592

Lim, E. W. and Ahmadi, M. T. and Ismail, R. (2016) Modeling and simulation of graphene-oxide-based RRAM. Journal of Computational Electronics, 15 (2). pp. 602-610. ISSN 1569-8025

Wang, Y. and Ting, C. M. and Ombao, H. (2016) Modeling effective connectivity in high-dimensional cortical source signals. IEEE Journal on Selected Topics in Signal Processing, 10 (7). pp. 1315-1325. ISSN 1932-4553

Binsilm, S. A. and Rad, M. A. and Ahmad, M. R. (2016) Modeling of integrated nanoneedle-microfluidic system for single cell temperature measurement. Applied Sciences (Switzerland), 6 (12). ISSN 2076-3417

Salma, Abdullah Binsilm and Rad, Maryam Alsadat and Ahmad, Mohd. Ridzuan (2016) Modeling of integrated nanoneedle-microfluidic system for single cell temperature measurement. Applied Sciences, 6 (12). p. 339. ISSN 2076-3417

Sharip, M. R. M. and Lau, K. Y. and Zaidel, D. N. A. (2016) Modeling of nanocomposite structures to evaluate the effect of nanoplatelet interphase region on electric field intensity. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 147-152. ISSN 2180-1843

Abdollahi, Y. and Zakaria, A. and Said, S. B. M. and Sabri, M. F. B. M. and Sairi, N. A. and Rezayi, M. and Abouzari Lotf, E. and Dorraj, M. and Islam, A. (2016) Modeling of photodegradation process to remove the higher concentration of environmental pollution. Desalination and Water Treatment, 57 (1). pp. 191-201. ISSN 1944-3994

Noor Adila, A. S. and Norafifah, H. and Noordin, M. Y. and Wong, K. Y. and Izman, S. (2016) Modeling of preparation conditions of PES ultrafiltration hollow fiber membranes using statistical regression techniques. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9718-9724. ISSN 1819-6608

Aziz, Z. A. and Zergani, S. and Viswanathan, K. K. (2016) Modeling of propagation tsunami waves via lattice Boltzmann method. International Journal of Applied Engineering Research, 11 (15). pp. 8483-8500. ISSN 0973-4562

Yousif, Q. A. and Mohd. Ghazali, N. and Zolpakar, N. A. and Novianto, S. and Pamitran, A. S. and Ahmad, R. (2016) Modeling of the minimized two-phase flow frictional pressure drop in a small tube with different correlations. Jurnal Teknologi, 78 (6-11). pp. 109-115. ISSN 0127-9696

Djauhari, M. A. and Li, L. S. and Salleh, R. M. (2016) Modeling positive time series data: a neglected aspect in time series courses. American Journal of Applied Sciences, 13 (7). pp. 860-869. ISSN 1546-9239

Borhani, T. N. G. and Afkhamipour, M. and Azarpour, A. and Akbari, V. and Emadi, S. H. and Manan, Z. A. (2016) Modeling study on CO2 and H2S simultaneous removal using MDEA solution. Journal of Industrial and Engineering Chemistry, 34 . pp. 344-355. ISSN 1226-086X

Abd. Kadir, Zulkiffli and Hudha, Khisbullah and Zamzuri, Hairi and Mazlan, Saiful Amri and Murrad, Muhamad and Imaduddin, Fitrian (2016) Modeling, validation and firing-onthe- move control of armored vehicles using active front-wheel steering. Journal of Defense Modeling and Simulation, 13 (2). pp. 253-267. ISSN 1548-5129

Ismail, M. A. and Muhamad, P. and Abu, A. (2016) Modelling and design smart controller of magneto rheological using bouc-wen and sim model for motorcycle suspension system. Jurnal Teknologi, 78 (6-13). pp. 31-36. ISSN 0127-9696

Bakhsheshi-Rad, Hamid Reza and Abdellahi, Majid and Hamzah, Esah and Ismail, Ahmad Fauzi and Bahmanpour, Maryam (2016) Modelling corrosion rate of biodegradable magnesium-based alloys: the case study of Mg-Zn-RE-xCa (x = 0, 0.5, 1.5, 3 and 6 wt%) alloys. Journal of Alloys and Compounds, 687 . pp. 630-642. ISSN 0925-8388

Bakhsheshi-Rad, H. R. and Abdellahi, M. and Hamzah, E. and Ismail, A. F. and Bahmanpour, M. (2016) Modelling corrosion rate of biodegradable magnesium-based alloys: the case study of Mg-Zn-RE-xCa (x = 0, 0.5, 1.5, 3 and 6 wt%) alloys. Journal of Alloys and Compounds, 687 . pp. 630-642.

Karimi, H. and Rahmani, R. and Ahmadi, M. T. and Ismail, R. (2016) Modelling effective charge density in graphene-gased DNA sensor. Science of Advanced Materials, 8 (6). pp. 1187-1194. ISSN 1947-2935

Jannati, M. and Sutikno, T. (2016) Modelling of a 3-phase induction motor under open-phase fault using matlab/simulink. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1146-1152. ISSN 2088-8694

Othman, S. N. and Mustaffa, Noorfa Haszlinna and Radzi, N.H.M. and Sallehuddin, Roselina and Bazin, Nor Erne Nazira (2016) A modelling of genetic algorithm for inventory routing problem simulation optimisation. International Journal of Supply Chain Management, 5 (4). pp. 43-51. ISSN 2051-3771

Othman, Siti Norsyahida and Mustaffa, Noorfa Haszlinna and Mohamed Radzi, Nor Haizan and Salleh@Sallehuddin, Roselina and Bazin, Nor Erne Nazira (2016) A modelling of genetic algorithm for inventory routing problem simulation optimisation. International Journal of Supply Chain Management, 5 (4). pp. 43-51. ISSN 2051-3771

Low, W. Y. and Aziz, M. J. A. and Idris, N. R. N. (2016) Modelling of lithium-titanate attery with ambient temperature effect for charger design. IET Power Electronics, 9 (6). pp. 1204-1212. ISSN 1755-4535

Low, W. Y. and Aziz, M. J. A. and Idris, N. R. N. (2016) Modelling of lithium-titanate battery with ambient temperature effect for charger design. IET Power Electronics, 9 (6). pp. 1204-1212. ISSN 1755-4535

Muharram, Ibnu Akil Maitar and Ismail, Zool Hilmi (2016) Modelling of shre drag tilt velocimeter (DTV) with curvilinear, gompertz and artificial neural network method. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 1-6. ISSN 2180-1843

Muharram, I. A. M. and Ismail, Z. H. (2016) Modelling of shre drag tilt velocimeter (DTV) with curvilinear, gompertz and artificial neural network method. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 1-6. ISSN 2180-1843

Samsuri, N. and Shaikh Salim, S. A. Z. and Musa, M. N. and Mat Ali, M. S. (2016) Modelling performance of ocean-thermal energy conversion cycle according to different working fluids. Jurnal Teknologi, 78 (11). pp. 207-215. ISSN 0127-9696

Bani, N. A. and Abdul Malek, Z. and Muhammad Sukki, F. and Abubakar Mas'Ud, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, N. A. and Abdul Malek, Z. and Muhammad Sukki, F. and Abubakar Mas'Ud, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Bani, N. A. and Abdul-Malek, Z. and Muhammad-Sukki, F. and Abubakar MasUd, A. and Muhtazaruddin, M. N. and Kamardin, K. and Jamian, J. J. and Ahmad, H. (2016) Modelling the effect of applied voltage and frequency on electroluminescence in polymeric material. International Journal of Electrical and Computer Engineering, 6 (3). pp. 1375-1384. ISSN 2088-8708

Mohd. Zaid, Z. B. and Shah, M. Z. and Rahim, A. B. A. (2016) Modelling the road transport for efficiency analysis. Trends in Bioinformatics, 9 (2). pp. 65-69. ISSN 1994-7941

Yaakop, A. Y. and Ismail, S. A. and Mahadi, N. and Ariffin, Z. Z. (2016) Modelling travelers behavioural intentions for Halal hospitality: A case of an emerging Islamic tourism hub. Social Sciences (Pakistan), 11 (21). pp. 5252-5255. ISSN 1818-5800

Al-Arimi, A. A. A. A. and Masrom, M. and Mahmood, N. H. N. (2016) The moderating effect of Islamic work ethics on the relationship between knowledge management capabilities and organizational performance at the private higher education institutions in Oman. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 396-407. ISSN 1992-8645

Al-Arimi, A. A. A. A. and Masrom, M. and Mahmood, N. H. N. (2016) The moderating effect of Islamic work ethics on the relationship between knowledge management capabilities and organizational performance at the private higher education institutions in Oman. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 396-407. ISSN 1992-8645

Ping, L. L. and Ahmad, U. N. U. and Hee, O. C. (2016) The moderating effects of affective commitment on the relationship between personality traits and customer-oriented behavior. Information (Japan), 19 (18A). pp. 3063-3068. ISSN 1343-4500

Masodl, Adaviah and Sulaiman, Zuraidah and Hashim, Noor Hazarina and Khalifah, Zainab (2016) The moderating role of integrated persuasive communication messages towards pro-environmental behaviour. Social Sciences (Pakistan), 11 (20). pp. 4924-4931. ISSN 1818-5800

Monjezi, M. and Baghestani, M. and Shirani Faradonbeh, R. and Pourghasemi Saghand, M. and Jahed Armaghani, D. (2016) Modification and prediction of blast-induced ground vibrations based on both empirical and computational techniques. Engineering with Computers, 32 (4). pp. 717-728. ISSN 0177-0667

Moawia, Rihab Musaad and Nasef, Mohamed Mahmoud and Mohamed, Nor Hasimah and Ripin, Adnan (2016) Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate. Radiation Physics and Chemistry, 122 . pp. 35-42. ISSN 0969-806X

Moawia, R. M. and Nasef, M. M. and Mohamed, N. H. and Ripin, A. (2016) Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate. Radiation Physics and Chemistry, 122 . pp. 35-42. ISSN 0969-806X

Ali, Umar and Abd. Karim, Khairil J. and Buang, Nor A. (2016) Modification of pristine multiwalled carbon nanotube by grafting with poly(methyl methacrylate) using benzoyl peroxide initiator. Journal of Applied Polymer Science, 133 (14). pp. 1-6.

Yuliati, L. and Siah, W. R. and Roslan, N. A. and Shamsuddin, M. and Lintang, H. O. (2016) Modification of titanium dioxide nanoparticles with copper oxide co-catalyst for photocatalytic degradation of 2,4-dichlorophenoxyacetic acid. Malaysian Journal of Analytical Sciences, 20 (1). pp. 171-178. ISSN 1394-2506

Shabri, Ani (2016) A modified EMD-ARIMA based on clustering analysis for fishery landing forecasting. Applied Mathematical Sciences, 10 (33-36). pp. 1719-1729. ISSN 1312-885X

Ahmad, A. and Yusof, R. (2016) A modified kohonen self-organizing map (KSOM) clustering for four categorical data. Jurnal Teknologi, 78 (6-13). pp. 75-80. ISSN 0127-9696

Then, Y. L. and You, K. Y. and Dimon, M. N. and Lee, C. Y. (2016) A modified microstrip ring resonator sensor with lumped element modeling for soil moisture and dielectric predictions measurement. Measurement: Journal of the International Measurement Confederation, 94 . pp. 119-125. ISSN 0263-2241

Ahmed, J. and Salam, Z. (2016) A modified P and O maximum power point tracking method with reduced steady-state oscillation and improved tracking efficiency. IEEE Transactions on Sustainable Energy, 7 (4). pp. 1506-1515. ISSN 1949-3029

Emhemed, A. A. A. and Mamat, R. B. and Mohd Faudzi, A. A. and Johary, M. R. and Osman, K. (2016) Modified predictive control for a class of electro-hydraulic actuator. International Journal of Electrical and Computer Engineering, 6 (2). pp. 630-638. ISSN 2088-8708

Anuar, S. and Selamat, A. and Sallehuddin, R. (2016) A modified scout bee for artificial bee colony algorithm and its performance on optimization problems. Journal of King Saud University - Computer and Information Sciences, 28 (4). pp. 395-406. ISSN 1319-1578

Sahroni, Norfarahain and Ali, Dayana Farzeeha (2016) Modul akademik teknologi pembinaan kerja tetulang keluli dan kerja konkrit. Jurnal Persatuan Pendidikan Teknik dan Vokasional Malaysia, Jilid 4 .

Jomah, A. F. and Shamsir, M. S. (2016) Molecular dynamic simulation of V176G mutation associated with Gerstmann–Sträussler–Scheinker at elevated temperature. Jurnal Teknologi, 78 (2). pp. 99-105. ISSN 0127-9696

Anisa, N. I. and Morad, N. A. and Iwai, Y. and Shah Ismail, M. H. (2016) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407 . pp. 1-10. ISSN 0378-3812

Anisa, N. I. and Morad, N. A. and Iwai, Y. and Shah Ismail, M. H. (2016) Molecular dynamics simulation for self-diffusion coefficients of ginger bioactive compounds in subcritical water with and without ethanol. Fluid Phase Equilibria, 407 . 197.e1-197.e10. ISSN 0378-3812

Mazlan, N. S. F. and Ahmad Khairudin, N. B. (2016) A molecular dynamics study of Beta-Glucosidase B upon small substrate binding. Journal of Biomolecular Structure and Dynamics, 34 (7). pp. 1486-1494. ISSN 0739-1102

Zaheer, M. R. and Gupta, A. and Iqbal, J. and Zia, Q. and Ahmad, A. and Roohi, Roohi and Owais, M. and Hashlamon, A. and Setapar, S. H. M. and Ashraf, G. M. and Aliev, G. (2016) Molecular mechanisms of drug photodegradation and photosensitization. Current Pharmaceutical Design, 22 (7). pp. 768-782. ISSN 1381-6128

Mohd. Arif, S. and Mahmoud Dogara, A. and Ma, N. L. and Shamsir, M. S. and Parvizpour, S. and Rahmat, Z. (2016) Molecular phylogeny and structure prediction of rice RFT1 protein. Jurnal Teknologi, 78 (2). pp. 115-120. ISSN 0127-9696

Tajudin, S. A. A. and Nordin, N. S. and Marto, A. and Madun, A. and Abidin, M. H. Z. and Jefferson, I. and Azmi, M. A. M. M. (2016) The monitoring and cementation behavior of electrokinetic stabilisation technique on Batu Pahat marine clay. International Journal of GEOMATE, 11 (4). pp. 2581-2588. ISSN 2186-2982

Djauhari, M. A. and Sagadavan, R. and Li, L. S. (2016) Monitoring multivariate process variability when sub-group size is small. Quality Engineering, 28 (4). pp. 429-440. ISSN 0898-2112

Ahmad Noorden, A. F. and Daud, S. and Haider Rizvi, S. Z. and Ali, J. and Yupapin, P. P. (2016) Monitoring of traffic using unmanned aerial vehicle in Malaysia landscape perspective. Jurnal Teknologi, 78 (3). pp. 225-230. ISSN 0127-9696

Halim, N. A. A. and Ngadi, N. and Ibrahim, M. N. M. and Ansari, S. M. (2016) Monomeric structure characterization of different sources biomass lignin. Key Engineering Materials, 700 . pp. 42-49. ISSN 1013-9826

Ghazali, M. A. and Md. Sawari, S. S. and Aziz, A. A. (2016) Mosques as a platform to address the issue of the anti-hadith ideology. Albayan, 14 (2). pp. 123-134. ISSN 2232-1950

Ismail, I. and Sunar, M. S. and Kolivand, H. (2016) Motion deformation style control technique for 3D humanoid character by using MoCap data. Jurnal Teknologi, 78 (42402). pp. 35-40. ISSN 0127-9696

Hee, Ong Choon and Kamaludin, Noorhayati and Ping, Limlee (2016) Motivation and job performance among nurses in the health tourism hospital in Malaysia. International Review of Management and Marketing, 6 (4). pp. 668-672. ISSN 2146-4405

Xi, L. and Jiar, Y. K. (2016) Motivation of internet use: relation with pathological internet use, gender and internet activities. Jurnal Teknologi, 78 (1). pp. 181-188. ISSN 0127-9696

Ahmad, H. and Amiri, I. S. and Soltanian, M. R. K. and Latif, A. A. and Norizan, S. F. and Alavi, S. E. (2016) Multi dual-wavelength generation using InGaAsP/InP passive microring resonator with two sides apodized gratings. Materials Express, 6 (3). pp. 245-251. ISSN 2158-5849

Yusoff, Y. and Zain, A. M. and Sharif, S. and Sallehuddin, R. (2016) Multi objective machining estimation model using orthogonal and neural network. Jurnal Teknologi, 78 (12-2). pp. 11-18. ISSN 0127-9696

Wan Omar, Wan Nor Nadyaini and Saidina Amin, Nor Aishah (2016) Multi response optimization of oil palm frond pretreatment by ozonolysis. Industrial Crops and Products, 85 . pp. 389-402. ISSN 0926-6690

Wan Omar, W. N. N. and Amin, N. A. S. (2016) Multi response optimization of oil palm frond pretreatment by ozonolysis. Industrial Crops and Products, 85 . pp. 389-402. ISSN 0926-6690

Khalil, M. A. R. and Ahmad, A. and Abdullah, T. A. T. and Al-Shatri, A. and Al-Shanini, A. (2016) Multi State analysis of process status using multilevel flow modelling and Bayesian network. Jurnal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Zare, M. and Pahl, C. and Rahnama, H. and Nilashi, M. and Mardani, A. and Ibrahim, O. and Ahmadi, H. (2016) Multi-criteria decision making approach in E-learning: a systematic review and classification. Applied Soft Computing, 45 . pp. 108-128. ISSN 1568-4946

Chew, W. C. and Lau, A. M. S. and Kanniah, K. D. (2016) Multi-level adaptive support vector machine classification for tropical tree species. International Journal of Geoinformatics, 12 (2). pp. 17-25. ISSN 1686-6576

Nagmeldin, W. and Shamsuddin, S. M. (2016) Multi-party protocol with access control on symmetric fully homomorphic encryption scheme. Journal of Theoretical and Applied Information Technology, 88 (3). pp. 499-510. ISSN 1992-8645

Khalil, Mohamed A. R. and Ahmad, Arshad and Tuan Abdullah, Tuan Amran and Ali Al-Shatri, Ali Hussein and Ali Al-Shanini, Ali Hasan (2016) Multi-state analysis functional models using Bayesian networks. Journal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Khalil, M. A. R. and Ahmad, A. and Abdullah, T. A. T. and Al Shatri, A. and Al Shanini, A. (2016) Multi-state analysis of process status using multilevel flow modelling and Bayesian network. Jurnal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Adamu, Aliyu and Shamsir, Mohd. Shahir and Abdul Wahab, Roswanira and Parvizpour, Sepideh and Huyop, Fahrul (2016) Multi-template homology-based structural model of L-2-haloacid dehalogenase (DehL) from Rhizobium sp. RC1. Journal of Biomolecular Structure and Dynamics . pp. 1-12. ISSN 0739-1102 (In Press)

Mohd. Taib, Nur Athirah and Bidin, Noriah and Haris, Hazlihan and Adnan, Nurul Nadia and Ahmad, M. (2016) Multi-walled carbon nanotubes saturable absorber in Q-switching flashlamp pumped Nd:YAG laser. Optics and Laser Technology, 79 . pp. 193-197. ISSN 0030-3992

Khan, Rizwan and Jamaluddin, Mohd. H. and Kazim, Jalil Ur Rehman and Nasir, Jamal and Owais, Owais (2016) Multiband-dielectric resonator antenna for LTE application. IET Microwaves Antennas & Propagation, 10 (6). pp. 595-598. ISSN 1751-8725

Oladokun, O. and Ahmad, A. and Abdullah, T. A. T. and Nyakuma, B. B. and Bello, A. A. H. and Al-Shatri, A. H. (2016) Multicomponent devolatilization kinetics and thermal conversion of imperata cylindrica. Applied Thermal Engineering, 105 . pp. 931-940. ISSN 1359-4311

Rahman, Md. Mizanur and Paatero, Jukka V. and Landelma, Risto and Wahid, Mazlan A. (2016) Multicriteria-based decision aiding technique for assessing energy policy elements-demonstration to a case in Bangladesh. Applied Energy, 164 . pp. 237-244. ISSN 0306-2619

Rahman, M. M. and Paatero, J. V. and Lahdelma, R. and Wahid, M. A. (2016) Multicriteria-based decision aiding technique for assessing energy policy elements-demonstration to a case in Bangladesh. Applied Energy, 164 . pp. 237-244. ISSN 0306-2619

Waheed, S. R. and Alkawaz, M. H. and Rehman, A. and Almazyad, A. S. and Saba, T. (2016) Multifocus watermarking approach based on discrete cosine transform. Microscopy Research and Technique, 79 (5). pp. 431-437. ISSN 1059-910X

Islam, S. and Bidin, N. and Riaz, S. and Naseem, S. and Sanagi, M. M. and Imran, M. (2016) Multilayer crack-free hybrid coatings for functional devices. Journal of Nanophotonics, 10 (2). pp. 1-12. ISSN 1934-2608

Mardani, A. and Zavadskas, E. K. and Khalifah, Z. and Jusoh, A. and Nor, K. M. D. (2016) Multiple criteria decision-making techniques in transportation systems: a systematic review of the state of the art literature. Transport, 31 (3). pp. 359-385. ISSN 1648-4142

Azizan, M. U. and Hussin, K. (2016) Multiple driving forces of paddy land conversion: a lesson from Malaysia’s rice bowl state. Jurnal Teknologi, 78 (1). pp. 39-43. ISSN 0127-9696

Khalid Aurangzaib, M. and Bhattacharyya, K. and Shafie, S. (2016) Multiple solutions of an unsteady stagnation-point flow with melting heat transfer in a Darcy-Brinkman porous medium. Nonlinear Engineering, 5 (2). pp. 99-106. ISSN 2192-8010

Abdul Latif, Adibah and Mohd. Amin, Nor Fadila and Herrera Libunao, Wilfredo and Yusof, Ibnatul Jalilah (2016) Multiple-choice items analysis using classical test theory and rasch measurement model. Multiple-Choice Items Analysis Using Classical Test Theory And Rasch Measurement Model, 96 . ISSN 000251569

Latif, A. B. A. and Yusof, I. J. and Amin, N. F. M. and Libunao, W. H. and Yusri, S. S. (2016) Multiple-choice items analysis using classical test theory and Rasch measurement model. Man In India, 96 (1). pp. 173-181. ISSN 0025-1569

Abd. Latif, Azizah and Yusof, Ibnatul Jalilah and Mohd. Amin, Nor Fadila and Libunao, Wilfredo Herrera and Yusri, Siti Sarah (2016) Multiple-choice items analysis using classical test theory and rasch measurement model. Man in India, 96 (1-2). pp. 173-181. ISSN 0025-1569

Zulkefli, N. A. H. and Ismail, M. and Zulkefli, N. A. I. and Hoe, Y. S. (2016) Multiscale boundary element method for Laplace equation. Jurnal Teknologi, 78 (42431). pp. 83-88. ISSN 0127-9696

Lee, Yien Thang and Hong, Heng See and Quirino, Joselito P. (2016) Multistacking from two sample streams in nonaqueous microchip electrophoresis. Analytical Chemistry, 88 (20). pp. 9915-9919. ISSN 0003-2700

Alavi, S. E. and Amiri, I. S. and Soltanian, M. R. K. and Penny, R. and Supa'at, A. S. M. and Ahmad, H. (2016) Multiwavelength generation using an add-drop microring resonator integrated with an InGaAsP/InP sampled grating distributed feedback. Chinese Optics Letters, 14 (2). ISSN 1671-7694

Alavi, Sayedehsan Ghahferokhi and Amiri, Sadegh Iraj and Soltanian, Mohammad Reza Khalifeh and Penny, Richard D. and Mohd. Supaat, Abu Sahmah and Ahmad, Asmahanim N. D. H. (2016) Multiwavelength generation using an add-drop microring resonator integrated with an InGaAsP/InP sampled grating distributed feedback. Chinese Optics Letters, 14 (2). ISSN 1671-7694

Fatah, N. A. A and Triwahyono, S. and Jalil, A. A. and Ahmad, A. and Abdullah, T. A. T. (2016) N-Heptane isomerization over mesostructured silica nanoparticles (MSN): dissociative-adsorption of molecular hydrogen on Pt and Mo sites. Applied Catalysis A: General, 516 . pp. 135-143.

Ali, I. and Alharbi, O. M. L. and Marsin Sanagi, M. (2016) Nano-capillary electrophoresis for environmental analysis. Environmental Chemistry Letters, 14 (1). pp. 79-98. ISSN 1610-3653

Goh, P. S. and Ismail, A. F. and Hilal, N. (2016) Nano-enabled membranes technology: sustainable and revolutionary solutions for membrane desalination? Desalination, 380 . pp. 100-104.

Iqbal, Nida and Abdul Kadir, M. R. and Iqbar, Saman and Abd. Razak, Saiful Izwan and Rafique, M. Shahid and Bakhsheshi-Rad, H. R. and Idris, Mohd. Hasbullah and Khattak, M. A. and Raghavendran, H. R. B. and Abbas, A. A. (2016) Nano-hydroxyapatite reinforced zeolite ZSM composites: a comprehensive study on the structural and in vitro biological properties. Ceramics International, 42 (6). pp. 7175-7182. ISSN 0272-8842

Ong, Chi Siang and Goh, Pei Sean and Lau, Woei Jye and Misdan, Nurasyikin and Ismail, Ahmad Fauzi (2016) Nanomaterials for biofouling and scaling mitigation of thin film composite membrane: a review. Desalination, 393 . pp. 2-15. ISSN 0011-9164

Abbas, K. N. and Bidin, N. and Al-Azawi, M. A. and Al-Asedy, H. J. (2016) Nanostructural and optical properties of hierarchical ZnO grown via hydrothermal method. Jurnal Teknologi, 78 (3). pp. 1-5. ISSN 0127-9696

Jaganathan, Saravana Kumar and Subramanian, Aruna Priyadarshni and Vellayappan, Muthu Vignesh and Balaji, Arunpandian and John, Agnes Aruna and Jaganathan, Ashok Kumar and Supriyanto, Eko (2016) Natural frequency of cancer cells as a starting point in cancer treatment. Current Science, 110 (9). pp. 1828-1832. ISSN 0011-3891

Gabdo, H. T. and Ramli, A. T. and Saleh, M. A. and Garba, N. N. and Sanusi, M. (2016) Natural radioactivity measurements in Pahang State, Malaysia. Isotopes In Environmental And Health Studies, 52 (3). pp. 298-308. ISSN 1025-6016

Suhana, J. and Rashid, M. (2016) Naturally occurring radionuclides in particulate emission from a coal fired power plant: a potential contamination? Journal Of Environmental Chemical Engineering, 4 (4). pp. 4904-4910. ISSN 2213-3437

Bahador, A. and Saud, S. N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M. K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding in the World, 60 (6). pp. 1133-1139. ISSN 0043-2288

Bahador, A. and Saud, S. N. and Hamzah, E. and Abubakar, T. and Yusof, F. and Ibrahim, M. K. (2016) Nd:YAG laser welding of Ti-27 at.% Nb shape memory alloys. Welding In The World, 60 (6). pp. 1133-1139.

Farokhi, Sajad and Flusser, Jan and Usman, Ullah Sheikh (2016) Near infrared face recognition: a literature survey. Computer Science Review, 21 . pp. 1-17. ISSN 1574-0137

Ismail, R. and Abdul Rahim, H. and Abd. Rahim, I. M. and Ghazali, R. (2016) Near infrared spectroscopy (NIRS) applications in medical: non-invasive and invasive leukemia screening. Jurnal Teknologi, 78 (7-4). pp. 15-25. ISSN 0127-9696

van der Heiden, P. and Pohl, C. and Mansor, S. and van Genderen, J. (2016) Necessitated absorptive capacity and metaroutines in international technology transfer: a new model. Journal of Engineering and Technology Management - JET-M, 41 . pp. 65-78. ISSN 0923-4748

Suhairom, Nornazira and Musta’amal, Aede Hatib and Mohd. Amin, Nor Fadila and Mokhtar, Mahani and Abd. Wahid, Nur Husna (2016) A needs assessment for the development of a competency model for culinary professionals. Advanced science letters . ISSN 1936-6612

Abdullahi, A. M. and Mohamed, Z. and Abidin, M. S. Z. and Akmeliawati, R. and Husain, A. R. and Bature, A. A. and Haruna, A. (2016) Negative imaginary theorem with an application to robust control of a crane system. Jurnal Teknologi, 78 (42532). pp. 33-39. ISSN 0127-9696

Djauhari, M. A. and Gan, S. L. (2016) Network topology of economic sectors. Journal of Statistical Mechanics: Theory and Experiment, 2016 (9). ISSN 1742-5468

Nawaz, N. and Harun, S. and Othman, R. and Heryansyah, A. (2016) Neuro-fuzzy systems approach to infill missing rainfall data for Klang River Catchment, Malaysia. Jurnal Teknologi, 78 (42533). pp. 15-21. ISSN 0127-9696

Kadir, Evizal Abdul and Shamsuddin, Siti Mariyam and Karya, Detri and Rosa, Sri Listia (2016) New algorithm for fast processing RFID system in container terminal. International Journal of Electrical and Computer Engineering, 6 (1). pp. 283-291. ISSN 2088-8708

Rokni, K. and Ahmad, A. and Solaimani, K. and Hazini, S. (2016) A new approach for detection of surface water changes based on principal component analysis of multitemporal normalized difference water index. Journal of Coastal Research, 32 (2). pp. 443-451. ISSN 0749-0208

Abd. Ali, Layth Imad and Wan Ibrahim, Wan Aini and Sulaiman, Azli and Kamboh, Muhammad Afzal and Sanagi, Mohd. Marsin (2016) New chrysin-functionalized silica-core shell magnetic nanoparticles for the magnetic solid phase extraction of copper ions from water samples. Talanta, 148 . pp. 191-199. ISSN 0039-9140

Ubaidillah, Ubaidillah and Imaduddin, F. and Li, Y. and Mazlan, S. A. and Sutrisno, J. and Koga, T. and Yahya, I. and Choi, S. B. (2016) A new class of magnetorheological elastomers based on waste tire rubber and the characterization of their properties. Smart Materials and Structures, 25 (11). ISSN 0964-1726

Saeh, Ibrahim and Mustafa, Mohd. Wazir and Al-Geelani, Nasir A. (2016) New classifier design for static security evaluation using artificial intelligence techniques. International Journal of Electrical and Computer Engineering, 6 (2). pp. 870-876. ISSN 2088-8708

Abujiya, M. R. and Riaz, M. and Lee, M. H. (2016) A new combined Shewhart-Cumulative Sum S chart for monitoring process standard deviation. Quality and Reliability Engineering International, 32 (3). pp. 1149-1165. ISSN 0748-8017

Bazyar, M. and Sudirman, R. (2016) A new data embedding method for mpeg layer III audio steganography. Jurnal Teknologi, 78 (7-5). pp. 67-73. ISSN 0127-9696

Ali, M. and Sufahani, S. and Ismail, Z. (2016) A new diet scheduling model for Malaysian school children using zero-one optimization approach. Global Journal of Pure and Applied Mathematics, 12 (1). pp. 413-419. ISSN 0973-1768

Kaewpruksapimon, Chatchada and Sallehuddin, Roselina and Mohamad, Radziah (2016) A new framework for matching semantic web service descriptions based on OWL-S services. International Journal of Advances in Soft Computing and its Applications, 8 (2). pp. 126-138. ISSN 2074-8523

Chuo, S. C. and Mohd. Setapar, S. H. and Ahmad, A. and Lokhat, D. (2016) New generation separation and identification methods for erythromycin. Der Pharmacia Lettre, 8 (19). pp. 215-222. ISSN 0975-5071

Mustapha, M. A. and Manan, Z. A. and Wan Alwi, S. R. (2016) A new green index as an overall quantitative green performance indicator of a facility. Clean Technologies and Environmental Policy, 18 (7). pp. 2161-2171. ISSN 1618-954X

Zuhair, H. and Selamat, A. and Salleh, M. (2016) New hybrid features for phish website prediction. International Journal of Advances in Soft Computing and its Applications, 8 (1). pp. 28-43. ISSN 2074-8523

Valipour, A. and Yahaya, N. and Md. Noor, N. and Mardani, A. and Antucheviciene, J. (2016) A new hybrid fuzzy cybernetic analytic network process model to identify shared risks in PPP projects. International Journal of Strategic Property Management, 20 (4). pp. 409-426. ISSN 1648-715X

Heydarianasl, M. and Rahmat, M. F. (2016) A new method to optimize geometric design of electrostatic sensor electrodes using particle swarm optimization. Jurnal Teknologi, 78 (7-4). pp. 75-83. ISSN 0127-9696

Zi, Shamsuddin Chik and Chandren, Sheela and Yuan, Lai Sin and Razali, Rasidah and Ho, Chin Siong and Hartanto, Djoko and Mahlia, Teuku Meurah Indra and Nur, Hadi (2016) New method to synthesize mesoporous titania by photodegradation of surfactant template. Solid State Sciences, 52 . pp. 83-91. ISSN 1293-2558

Abd. Wahib, Siti Munirah and Wan Ibrahim, Wan Aini and Sanagi, Mohd. Marsin (2016) New methyltrimethoxysilane-(3-mercaptopropyl)- trimethoxysilane coated hollow fiber-solid phase microextraction for hexanal and heptanal analysis. Malaysian Journal of Analytical Sciences, 20 (1). pp. 51-63. ISSN 1394-2506

Wahib, S. M. A. and Ibrahim, W. A. W. and Sanagi, M. M. (2016) New methyltrimethoxysilane-(3-mercaptopropyl)- trimethoxysilane coated hollow fiber-solid phase microextraction for hexanal and heptanal analysis [Pengekstrakan mikro fasa pepejal-gentian berongga tersalut metiltrimetoksisilana- (3-merkaptopropil)trimetoksisilana Baharu bagi analisis heksanal dan heptanal]. Malaysian Journal Of Analytical Sciences, 20 (1). pp. 51-63.

Khandelwal, M. and Armaghani, D. J. and Faradonbeh, R. S. and Ranjith, P. G. and Ghoraba, S. (2016) A new model based on gene expression programming to estimate air flow in a single rock joint. Environmental Earth Sciences, 75 (9). ISSN 1866-6280

Aldhaibani, A. O. and Rahman, T. A. and Aljunid, S. A. and Hindia, M. N. and Hanafi, E. B. (2016) A new model to enhance the QoS of spectral amplitude coding-optical code division multiple access system with OFDM technique. Optical and Quantum Electronics, 48 (10). ISSN 0306-8919

Ao, Aldhaibani and Abd. Rahman, Tharek and Syed, Alwee Aljunid and Mohammad, Nour Hindia and Hanafi, Effariza (2016) A new model to enhance the QOS of spectral amplitude coding-optical code division multiple access system with OFDM technique. Optical and Quantum Electronics, 48 (10). pp. 1-12. ISSN 0306-8919

Beheshti, Z. and Firouzi, M. and Shamsuddin, S. M. and Zibarzani, M. and Yusop, Z. (2016) A new rainfall forecasting model using the CAPSO algorithm and an artificial neural network. Neural Computing and Applications, 27 (8). pp. 2551-2565. ISSN 0941-0643

Thines, K. R. and Abdullah, E. C. and Ruthiraan, M. and Mubarak, N. M. and Tripathi, M. (2016) A new route of magnetic biochar based polyaniline composites for supercapacitor electrode materials. Journal of Analytical and Applied Pyrolysis, 121 . pp. 240-257. ISSN 0165-2370

Abd. Rahim, Mashkurah and Wan Ibrahim, Wan Aini and Ramli, Zainab and Sanagi, Mohd. Marsin and Aboul Enein, Hassan Y. (2016) New sol-gel hybrid material in solid phase extraction combined with liquid chromatography for the determination of non-steroidal anti-inflammatory drugs in water samples. Chromatographia, 79 (7-8). pp. 421-429.

Abd. Rahim, Mashkurah and Wan Ibrahim, Wan Aini and Ramli, Zainab and Sanagi, Mohd. Marsin and Aboul-Enein, Hassan Y. (2016) New sol–gel hybrid material in solid phase extraction combined with liquid chromatography for the determination of non-steroidal anti-inflammatory drugs in water samples. Chromatographia, 79 (7-8). pp. 421-429. ISSN 0009-5893

Obayes, H. K. and Wagiran, H. and Hussin, R. and Saeed, M. A. (2016) A new strontium/copper co-doped lithium borate glass composition with improved dosimetric features. Journal of Luminescence, 176 . pp. 202-211. ISSN 0022-2313

Hadi Yaghoubyan, S. and Maarof, M. A. and Zainal, A. and Oghaz, M. M. (2016) A new tomographic based keypoint descriptor using heuristic genetic algorithm. Journal of Theoretical and Applied Information Technology, 86 (1). pp. 159-172. ISSN 1992-8645

Razak, D. M. and Samion, S. and Noorawzi, N. and Azli, Y. (2016) A new tribological approach for lubricated sliding contact of pitted metallic curvature cup. Tribology Transactions, 59 (5). pp. 876-882. ISSN 1040-2004

Razak, D. M. and Syahrullail, S. and Sapawe, N. and Azli, Y. and Nuraliza, N. (2016) A new tribological approach on metal cup with optimized pits model using spark discharge machine. Particulate Science and Technology, 34 (2). pp. 209-216. ISSN 0272-6351

Yew, H. T. and Supriyanto, E. and Satria, M. H. and Hau, Y. W. (2016) New vertical handover method to optimize utilization of wireless local area network in high-speed environment. PLoS ONE, 11 (11). ISSN 1932-6203

Ma, C. K. and Awang, A. Z. and Garcia, R. and Omar, W. and Pilakoutas, K. and Azimi, M. (2016) Nominal curvature design of circular HSC columns confined with post-tensioned steel straps. Structures, 7 . pp. 25-32. ISSN 2352-0124

Hamzah, A. F. and Ibrahim, M. H. W. and Jamaluddin, N. and Jaya, R. P. and Arshad, M. F. and Zainal Abidin, N. E. and Manan, E. A. and Omar, N. A. (2016) Nomograph of self-compacting concrete mix design incorporating coal bottom ash as partial replacement of fine aggregates. Journal Of Engineering And Applied Sciences, 11 (7). pp. 1671-1675. ISSN 1816-949X

Mehrez, O. and Zyada, Z. and Abbas, H. S. and Abo Ismail, A. A. (2016) Non-prehensile manipulation planning of a three-rigid-link object using two cooperative robot arms. International Journal Of Modelling, Identification And Control, 26 (1). pp. 19-31. ISSN 1746-6172

Ting, T. Y. and Idrus, N. M. and Masri, R. and Wan Mohd. Fauzia, W. N. F. and Sarmin, N. H. and Mat Hassim, H. I. (2016) The nonabelian tensor square of a Bieberbach group with symmetric point group of order six. Jurnal Teknologi, 78 (1). pp. 189-193. ISSN 0127-9696

Lee, H. and Yahya, A. and Khamis, N. H. and Samion, S. (2016) Nonlinear servomotor in single pulse simulation of Electrical Discharge Machining system modeling. Indonesian Journal of Electrical Engineering and Computer Science, 1 (2). pp. 319-328. ISSN 2502-4752

Tuyen, N. D. and Fujita, G. and Muhtazaruddin, M. N. B. (2016) Notch adaptive filter solution under unbalanced and/or distorted PCC voltage for 3-phase 3-wire shunt active power filter. Electrical Engineering, 98 (3). pp. 321-332. ISSN 0948-7921

Zarei, A. and Yusof, K. M. and Daud, M. F. B. and Kolivand, H. and Saba, T. (2016) A novel approach of multimedia instruction applications in engineering education. Journal of Theoretical and Applied Information Technology, 93 (2). pp. 472-486. ISSN 1992-8645

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Kasiri-Asgarani, M. and Daroonparvar, M. and Parham, S. and Iqbal, N. and Medraj, M. (2016) Novel bi-layered nanostructured SiO2/Ag-FHAp coating on biodegradable magnesium alloy for biomedical applications. Ceramics International, 42 (10). pp. 11941-11950. ISSN 0272-8842

Ten, J. Y. and Hassim, M. H. and Chemmangattuvalappil, N. and Ng, D. K. S. (2016) A novel chemical product design framework with the integration of safety and health aspects. Journal of Loss Prevention in the Process Industries, 40 . pp. 67-80. ISSN 0950-4230

Oskooei, M. A. and Mohd Daud, S. and Ibrahim, S. and Davoudi, V. and Kamardin, K. (2016) A novel composite web service selection based on quality of service. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3356-3361. ISSN 1819-6608

Mustafa, Mohd. Wazir and Mustapha, Mamunu and Jamian, Jasrul Jamani and I. Abujarad, Saleh Y. and Abdirahman, Mohamed Abdilahi (2016) A novel constraint handling approach for metaheuristic techniques in solving economic dispatch problems. Arpn Journal of Engineering and Applied Sciences, 11 (9). pp. 5661-5668. ISSN 1819-6608

Tolabi, H. B. and Shakarami, M. R. and Hosseini, R. and Ayob, S. B. M. (2016) Novel FGbSA: fuzzy-Galaxy-based search algorithm for multi-objective reconfiguration of distribution systems. Russian Electrical Engineering, 87 (10). pp. 588-595. ISSN 1068-3712

Ajdari, Zahra and Rahman, Heshu and Shameli, Kamyar and Abdullah, Rasedee and Abd. Ghani, Maaruf and Yeap, Swee and Abbasiliasi, Sahar and Ajdari, Daniel and Ariff, Arbakariya (2016) Novel gold nanoparticles reduced by sargassum glaucescens: preparation, characterization and anticancer activity. Molecules, 21 (3). pp. 1-17. ISSN 1420-3049

Moslehyani, A. and Mobaraki, M. and Matsuura, T. and Ismail, A. F. and Othman, M. H. D. and Chowdhury, M. N. K. (2016) Novel green hybrid processes for oily water photooxidation and purification from merchant ship. Desalination, 391 . pp. 98-104. ISSN 0011-9164

Moslehyani, A. and Mobaraki, M. and Matsuura, T. and Ismail, A. F. and Othman, M. H. D. and Chowdhury, M. N. K. (2016) Novel green hybrid processes for oily water photooxidation and purification from merchant ship. Desalination, 391 . pp. 98-104. ISSN 0011-9164

John, A. A and Jaganathan, S. K. and Supriyanto, E. and Khudzari, A. Z. M. and Muhamad, I. I. (2016) Novel green surface modification of metallocene polyethylene by steam to enhance its hemocompatible properties. Journal Of Applied Polymer Science, 133 (18). pp. 1-10. ISSN 0021-8995

Soleymani, S. A. and Goudarzi, S. and Anisi, M. H. and Hassan, W. H. and Idris, M. Y. I. and Shamshirband, S. and Noor, N. M. and Ahmedy, I. (2016) A novel method to water level prediction using RBF and FFA. Water Resources Management, 30 (9). pp. 3265-3283. ISSN 0920-4741

Hisham Ismail, Mohd. Khairul and Esa, Mazlina and Mohd. Yusoff, Mohd. Fairus and Murad, Noor Asniza (2016) Novel nano structure for green energy harvesting at 10 micrometer thermal radiation. Journal of Electronic Science and Technology, 14 (3). pp. 242-248. ISSN 1674-862X

Attaran, S. M. and Yusof, R. and Selamat, H. (2016) A novel optimization algorithm based on epsilon constraint-RBF neural network for tuning PID controller in decoupled HVAC system. Applied Thermal Engineering, 99 . pp. 613-624. ISSN 1359-4311

Nordin, Nur Dalilah and Abdul Rahman, H. (2016) A novel optimization method for designing stand alone photovoltaic system. Renewable Energy, 89 . pp. 706-715. ISSN 0960-1481

Goudarzi, S. and Hassan, W. H. and Hashim, A. H. A. and Soleymani, S. A. and Anisi, M. H. and Zakaria, O. M. (2016) A novel RSSI prediction using imperialist competition algorithm (ICA), radial basis function (RBF) and firefly algorithm (FFA) in wireless networks. PLoS ONE, 11 (7). ISSN 1932-6203

Gul, S. and Ismail, M. and Khan, M. I. and Khan, S. B. and Asiri, A. M. and Rahman, I. U. and Khan, M. A. and Kamboh, M. A. (2016) Novel synthesis of silver nanoparticles using melon aqueous extract and evaluation of their feeding deterrent activity against housefly Musca domestica. Asian Pacific Journal of Tropical Disease, 6 (4). pp. 311-316. ISSN 2222-1808

Aftab, A. and Ismail, A. R. and Khokhar, S. and Ibupoto, Z. H. (2016) Novel zinc oxide nanoparticles deposited acrylamide composite used for enhancing the performance of water-based drilling fluids at elevated temperature conditions. Journal Of Petroleum Science And Engineering, 146 . pp. 1142-1157. ISSN 0920-4105

Yusof, K. M. and Isaak, S. and Rashid, N. C. A. and Ngajikin, N. H. (2016) NPK detection spectroscopy on non-agriculture soil. Jurnal Teknologi, 78 (11). pp. 227-231. ISSN 0127-9696

Alias, N. and Suhari, N. N. Y. and Teh, C. R. C. (2016) Numerical analysis of spray-dic modeling for fruit concentration drying process into powder based on computational fluid dynamic. Jurnal Teknologi, 78 (42464). pp. 25-30. ISSN 0127-9696

Alias, Norma and Abdul Hanan, Sakinah and Ali, Akhtar and Dollah, Zakaria (2016) Numerical analysis on mathematical model for drug delivery system on blood flow in external magnetic fields by magnetic nanoparticles. Jurnal Teknologi, 78 (4-4). pp. 31-37. ISSN 0127-9696

Aliyu Bello, A. and Ahmad, Arshad and Ripin, Adnan and Oladokun, Olagoke (2016) Numerical estimation of moisture content in spray dried juice powder. Jurnal Teknologi, 78 (8-3). pp. 65-70. ISSN 0127-9696

Sadiq, T. O. and Fadara, T. G. and Aiyedun, Aiyedun and Idris, J. (2016) Numerical estimation of rolling load and torque for hot flat rolling of Hcss316 at low strain rates based on mean temperature. International Journal Of Engineering Research In Africa, 26 . pp. 11-29. ISSN 1663-3571

Gholami, A. and Wahid, M. A. and Mohammed, H. A. and Saat, A. and Mohd. Yasin, M. F. and Sies, M. M. and Kamaruzaman, N. and Rahman, M. M. (2016) Numerical evaluation of thermo-hydraulic performance in fin-and-tube compact heat exchangers with different tube cross-sections. Jurnal Teknologi, 78 (8-4). pp. 113-118. ISSN 0127-9696

Haryono, A. P. and Sumeru, K. and Aziz, A. A. and Nasution, H. (2016) Numerical investigation on ejector as an expansion device using R290 in residential air conditioner for various cooling capacity. ARPN Journal Of Engineering And Applied Sciences, 11 (2). pp. 805-808. ISSN 1819-6608

Belhocine, A. and Omar, W. Z. W. (2016) A numerical parametric study of mechanical behavior of dry contact slipping on the disc-pads interface. Alexandria Engineering Journal, 55 (2). pp. 1127-1141. ISSN 1110-0168

Reza Hassanzadeh, A. and Yaakob, O. B. and Ahmed, Y. M. and Arif Ismail, M. (2016) Numerical simulation for unsteady flow over marine current turbine rotors. Wind and Structures, An International Journal, 23 (4). pp. 301-311. ISSN 1226-6116

Mohd. Ghazali, Normah and Fa, Liew Kim (2016) Numerical simulation of flow surrounding a thermoacoustic stack: single-stack against double-stack plate domain. Jurnal Teknologi, 78 (8-4). pp. 119-125. ISSN 0127-9696

Mohd. Ghazali, N. and Fa, L. K. (2016) Numerical simulation of flow surrounding a thermoacoustic stack:single-stack against double-stack plate domain. Jurnal Teknologi, 78 (8-4). pp. 119-125. ISSN 0127-9696

Mohd. Yazid, Nazatulsyima and Tay, Kim Gaik and Choy, Yaan Yee and Md. Sudin, Azila and Tiong, Wei King and Ong, Chee Tiong (2016) Numerical solution of the forced korteweg-de vries (FKDV) equation. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10757-10760. ISSN 1819-6608

Zin, N. A. M. and Rawi, N. A. and Khan, I. and Shafie, S. (2016) Numerical solution of unsteady free convection flow in a second grade fluid. Jurnal Teknologi, 78 (42431). pp. 89-93. ISSN 0127-9696

Pullepu, B. and Sambath, P. and Selva Rani, M. and Chamkha, A. J. and Viswanathan, K. K. (2016) Numerical solutions of free convective flow from a vertical cone with mass transfer under the influence of chemical reaction and heat generation/absorption in the presence of UWT/UWC. Journal Of Applied Fluid Mechanics, 9 (1). pp. 343-356. ISSN 1735-3572

Nawi, N. D. and Ong, S. T. and Ali, J. and Chaudhary, K. and Bahadoran, M. and Daud, S. (2016) Numerical studies of ion beam in NX2 plasma focus for different applied voltage. Jurnal Teknologi, 78 (3-2). pp. 133-137. ISSN 0127-9696

Vanaki, Sh. M. and Ganesan, R. and Mohammed, H. A. (2016) Numerical study of convective heat transfer of nanofluids: a review. Renewable & Sustainable Energy Reviews, 54 . pp. 1212-1239. ISSN 1364-0321

Salman, B. H. and Mohammed, H. A. and Kherbeet, A. Sh. (2016) Numerical Study of Three Different Approaches to simulate nanofluids flow and heat transfer in a microtube. Heat Transfer-Asian Research, 45 (1). pp. 46-58. ISSN 1099-2871

Yengejeh, Mortaza Azizi and Amiri, Mojtaba Maali and Mehdigholi, Hamid and Seif, Mohammad Saeed and Yaakob, Omar (2016) Numerical study on interference effects and wetted area pattern of asymmetric planing catamarans. Proceedings Of The Institution Of Mechanical Engineers Part M-Journal Of Engineering For The Maritime Environment, 230 (2). pp. 417-433. ISSN 1475-0902

Eteng, A. A. and Abdul Rahim, S. K. and Leow, C. Y. (2016) Numerical study on the distance-dependence of optimal loop size-ratios for inductive coupling links. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3117-3121. ISSN 1819-6608

Zahmatkesh, Farshad and Osman, Hanim and Talebi, Elnaz and Kueh, Ahmad Beng Hong and Md. Tahir, Mahmood (2016) Numerical study on the structural performance of steel beams with slant end-plate connections. Latin American Journal of Solids and Structures, 13 (7). pp. 1360-1387. ISSN 1679-7817

Danial, O. and Salim, M. R. and Salmiati, Salmiati (2016) Nutrient removal of grey water from wet market using sequencing batch reactor [Penyingkiran nutrien air basuhan dari pasar basah mengguna reaktor kelompok urutan]. Malaysian Journal Of Analytical Sciences, 20 (1). pp. 142-148. ISSN 1394-2506

Ahmmad, S. N. Z. and Su Lee Ming, E. and Che Fai, Y. and Sood, S. and Gandhi, A. (2016) Objective measurement for surgical skill evaluation. Jurnal Teknologi, 78 (7-5). pp. 145-152. ISSN 0127-9696

Ahmmad, Siti Nor Zawani and Lee Ming, Eileen Su and Yeong, Che Fai and Sood, Suneet and Gandhi, Anil (2016) Objective measurement for surgical skill evaluation. Jurnal Teknologi, 78 (7-5). pp. 145-152. ISSN 2180-3722

Qureshi, K. N. and Abdullah, A. H. and Lloret, J. and Altameem, A. (2016) OBPF: opportunistic beaconless packet forwarding strategy for vehicular ad hoc networks. Ksii Transactions On Internet And Information Systems, 10 (5). pp. 2144-2165. ISSN 1976-7277

Adeyemi, I. R. and Razak, S. A. and Salleh, M. and Venter, H. S. (2016) Observing consistency in online communication patterns for user re-identification. Plos One, 11 (12). pp. 1-3. ISSN 1932-6203

Abdurabu, W. A. and Saleh, M. A. and Ramli, A. T. and Heryansyah, A. (2016) Occurrence of natural radioactivity and corresponding health risk in groundwater with an elevated radiation background in Juban District, Yemen. Environmental Earth Sciences, 75 (20). pp. 1-14. ISSN 1866-6280

Mohd. Kassim, A. S. and Aripin, A. M. and Ishak, N. and Zainulabidin, M. H. and Abang Zaidel, D. N. F. (2016) Oil palm leaf fibre and its suitability for paper-based products. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7364-7369. ISSN 1819-6608

Saboori, B. and Al-Mulali, U. and Bin Baba, M. and Mohammed, A. H. (2016) Oil-induced environmental Kuznets curve in organization of petroleum exporting countries (OPEC). International Journal of Green Energy, 13 (4). pp. 408-416. ISSN 1543-5075

Khankhaje, Elnaz and Hussin, Mohd. Warid and Mirza, Jahangir and Rafieizonooz, Mandi and Salim, Mohd. Razman and Siong, Ho Chin and Mohd. Warid, Muhammad Naqiuddin (2016) On blended cement and geopolymer concretes containing palm oil fuel ash. Materials & Design, 89 . pp. 385-398. ISSN 0264-1275

Muminov, M. E. and Shermatova, Y. M. (2016) On finiteness of discrete spectrum of three-particle Schrödinger operator on a lattice. Russian Mathematics, 60 (1). pp. 22-29. ISSN 1066-369X

Ashaari, A. and Ahmad, T. (2016) On fuzzy autocatalytic set. International Journal Of Pure And Applied Mathematics, 107 (1). pp. 59-68. ISSN 1311-8080

Baharudin, Zikri Abadi and Cooray, Vernon and Rahman, Mahbubur and Hettiarachchi, Pasan and Ahmad, Noor Azlinda (2016) On the characteristics of positive lightning ground flashes in Sweden. Journal of Atmospheric and Solar-Terrestrial Physics, 138-13 . pp. 106-111. ISSN 1364-6826

Rilyanti, M. and Mukti, R. R. and Kadja, G. T. M. and Ogura, M. and Nur, H. and Ng, E. P. and Ismunandar, Ismunandar (2016) On the drastic reduction of organic structure directing agent in the steam-assisted crystallization of zeolite with hierarchical porosity. Microporous and Mesoporous Materials, 230 . pp. 30-38. ISSN 1387-1811

Ganjehkaviri, A. and Mohd. Jaafar, M. N. and Hosseini, S. E. and Barzegaravval, H. (2016) On the optimization of energy systems: Results utilization in the design process. Applied Energy, 178 . pp. 587-599.

Shoushtari, A. V. and Adnan, A. B. and Zare, M. (2016) On the selection of ground-motion attenuation relations for seismic hazard assessment of the Peninsular Malaysia region due to distant Sumatran subduction intraslab earthquakes. Soil Dynamics and Earthquake Engineering, 82 . pp. 123-137. ISSN 0267-7261

Selvakumar, M. and Srivastava, P. and Pawar, H. S. and Francis, N. K. and Das, B. and Sathishkumar, G. and Subramanian, B. and Jaganathan, S. K. and George, G. and Anandhan, S. and Dhara, S. and Nando, G. B. and Chattopadhyay, S. (2016) On-demand guided bone regeneration with microbial protection of ornamented SPU scaffold with bismuth-doped single crystalline hydroxyapatite: augmentation and cartilage formation. ACS Applied Materials and Interfaces, 8 (6). pp. 4086-4100. ISSN 1944-8244

Durdyev, S. and Ismail, S. (2016) On-site construction productivity in Malaysian infrastructure projects. Structural Survey, 34 (4-5). pp. 446-462. ISSN 0263-080X

Chiong, M. S. and Rajoo, S. and Romagnoli, A. and Costall, A. W. and Martinez-Botas, R. F. (2016) One-dimensional pulse-flow modeling of a twin-scroll turbine. Energy, 115 . pp. 1291-1304. ISSN 0360-5442

Aris, N. A. M. and Din, J. (2016) One-minute rain rate statistics prediction using Ito-Hosoya model in Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3396-3399. ISSN 1819-6608

Moortheswaran, S. and Manikandan, A. and Sujatha, S. and Jaganathan, S.K. (2016) One-pot combustion synthesis and characterization studies of spinel CoAl2O4 nano-catalysts. Nanoscience And Nanotechnology Letters, 8 (5). pp. 424-427.

Said, M. N. H. M. and Tahir, L. and Ali, M. F. (2016) Online collaborative learning interactions in a tertiary ICT education course. Information (Japan), 19 (7A). pp. 2469-2475. ISSN 1343-4500

Rezaei, S. and Ali, F. and Amin, M. and Jayashree, S. (2016) Online impulse buying of tourism products: the role of web site personality, utilitarian and hedonic web browsing. Journal of Hospitality and Tourism Technology, 7 (1). pp. 60-83. ISSN 1757-9880

Loo, H. R. and Joseph, S. B. and Marsono, M. N. (2016) Online incremental learning for high bandwidth network traffic classification. Applied Computational Intelligence And Soft Computing, 2016 . pp. 1-13. ISSN 1687-9724

Loo, H. R. and Marsono, M. N. (2016) Online network traffic classification with incremental learning. Evolving Systems, 7 (2). pp. 129-143. ISSN 1868-6478

Jamaludin, J. and Rahim, R. A. (2016) Online optical tomography system for detecting and measuring the diameters of solid and transparent objects. IEEE Sensors Journal, 16 (16). pp. 6175-6183. ISSN 1530-437X

Bassi, J. S. and Ru, L. H. and Ismail, I. and Khammas, B. M. and Marsono, M. N. (2016) Online peer-to-peer traffic identification based on complex events processing of traffic event signatures. Jurnal Teknologi, 78 (7). pp. 9-16. ISSN 0127-9696

Abdul Karim, N. I. and Wan Ibrahim, W. A. and Sanagi, M. M. and Abdul Keyon, A. S. (2016) Online preconcentration by electrokinetic supercharging for separation of endocrine disrupting chemical and phenolic pollutants in water samples. Electrophoresis, 37 (20). pp. 2649-2656. ISSN 0173-0835

Octaviani, D. and Othman, M. S. (2016) Ontology reasoning using SPARQL query: A case study of e-learning usage. Jurnal Teknologi, 78 (8-2). pp. 95-105. ISSN 0127-9696

Yusof, M. M. and Ismail, Z. and Rahim, N. Z. A. and Abidin, W. Z. and Samy, G. N. (2016) Open innovation and social media use towards informatics reporting: a systematic literature review. Jurnal Teknologi, 78 (42464). pp. 107-112. ISSN 0127-9696

Sabikan, Sulaiman and Nawawi, Sophan Wahyudi (2016) Open-source project (OSPS) platform for outdoor quadcopter. Journal of Advanced Research Design, 24 (1). pp. 13-27. ISSN 2462-1943

Hassan, Sitti Asmah and Wong, Lavine and Mashros, Nordiana and Mohammed Alhassan, Hashim and Abdul Sukor, Nur Sabahiah and Rohani, Munzilah and Minhans, Anil (2016) Operating speed of vehicles during rainfall at night: case study in Pontian, Johor. Jurnal Teknologi, 78 (7-2). pp. 9-18. ISSN 0127-9696

Zardari, N. H. and Shirazi, S. M. and Farahen, N. and Irena, N. (2016) Operational efficiency and up-coning problem of scavenger wells in lower Indus Basin of Pakistan. Desalination and Water Treatment, 57 (60). pp. 29178-29191. ISSN 1944-3994

Chin, Seng Lee and Mohd. Nor, Shadiah Husna and Al-Shanini, Ali and Ahmad, Arshad (2016) Operational risk analysis for undesired polymerization in overhead condenser of butadiene column. Jurnal Teknologi, 78 (8-3). pp. 43-50. ISSN 0127-9696

Balasena, G. and Sim, L. and Zakaria, Z. and Abu Bakar, S. and Abd. Rahim, M. A. and Mansor, S. B. and Balkhis, I. and Rahiman, M. H. F. and Abdul Rahim, R. (2016) The opportunity of magnetic induction tomography modality in breast cancer detection. Jurnal Teknologi, 78 (7-4). pp. 103-107. ISSN 0127-9696

Noorden, A. F. A. and Daud, S. and Rizvi, S. Z. H. and Ali, J. and Yupapin, P. P. (2016) Optical bistability controlled using add-drop mobius microring resonator system. Jurnal Teknologi, 78 (3). pp. 225-230. ISSN 0127-9696

Ashraf Khamsan, M. E. and Mohd. Ghazali, M. S. and Salleh, H. and Zakaria, A. and Ghazali, S. M. and Ahmad, Z. and Aziz, M. S. (2016) Optical characterization on ITO/TiO2/P3HT/Areca Catechu/au for thin film hybrid solar cell. Jurnal Teknologi, 78 (3). pp. 247-251. ISSN 0127-9696

David, Michael and Ibrahim, Mohd Haniff and Idrus Sutan Nameh, Sevia Mahdaliza and Ngajikin, Nor Hafizah and Azmi, Asrul Izam and Ching En, Marcus Tay (2016) Optical path length, temperature, and wavelength effects simulation on ozone gas absorption cross sections towards green communications. Journal of Electronic Science and Technology, 14 (3). pp. 199-204. ISSN 1674-862X

Jamaludin, J. and Abdul Rahim, R. and Abdul Rahim, H. and Fazalul Rahiman, H. and Mohd. Muji, S. Z. and Jumaah, M. F. and Mohd. Fadzil, N. S. (2016) Optical tomography system: application of Charge Coupled Device (CCD) for solid and transparent objects detection. Jurnal Teknologi, 78 (7-4). pp. 145-153. ISSN 0127-9696

Ahmadi, F. and Hussin, R. and Ghoshal, S. K. (2016) Optical transitions in Dy3+-doped magnesium zinc sulfophosphate glass. Journal of Non-Crystalline Solids, 452 . pp. 266-272. ISSN 0022-3093

Mohd. Aziz, Mohd. Khairul Bazli and Yusof, Fadhilah and Mohd. Daud, Zalina and Yusop, Zulkifli and Kasno, Mohammad Afif (2016) Optimal design of rain gauge network in Johor by using geostatistics and particle swarm optimization. International Journal of GEOMATE, 11 (3). pp. 2422-2428. ISSN 2186-2982

Hafizan, A. M. and Wan Alwi, S. R. and Manan, Z. A. and Klemes, J. J. (2016) Optimal heat exchanger network synthesis with operability and safety considerations. Clean Technologies and Environmental Policy, 18 (8). pp. 2381-2400. ISSN 1618-954X

Zahraee, S. M. and Chegeni, A. and Toghtamish, A. (2016) The optimal parameter design for a welding unit of manufacturing industry by taguchi method and computer simulation. Journal of Industrial Engineering and Management, 9 (2). pp. 487-504. ISSN 2013-8423

Maghsoudi, M. J. and Mohamed, Z. and Husain, A. R. and Tokhi, M. O. (2016) An optimal performance control scheme for a 3D crane. Mechanical Systems and Signal Processing, 66-67 . pp. 756-768. ISSN 0888-3270

Abd. Kadir, Zulkiffli and Zamzuri, Hairi and Hudha, Khisbullah and Mazlan, Saiful Amri and Amer, Noor Hafizah and Murrad, Muhamad (2016) Optimisation of yaw rejection control for armoured vehicle using Taguchi method. International Journal of Heavy Vehicle Systems, 23 (1). pp. 60-80. ISSN 1744-232X

Harun, Z. and Yunos, M. Z. and Yusof, K. N. and Shohur, M. F. and Lau, W. J. and Salleh, W. N. W. (2016) Optimization and characterization of polysulfone membranes made of zinc oxide, polyethylene glycol and eugenol as additives. Journal of Engineering Science and Technology, 11 (7). pp. 1001-1015. ISSN 1823-4690

Zolpakar, Nor Atiqah and Mohd. Ghazali, Normah (2016) Optimization of a thermoacoustic refrigerator with an evolutionary algorithm approach. Jurnal Teknologi, 78 (9-2). pp. 19-24. ISSN 0127-9696

Nallappan, Madana Leela and Nasef, Mohamed Mahmoud and Ahmad, Arshad (2016) Optimization of batch conditions for the removal of boron by Amberlite IR743. Jurnal Teknologi, 78 (8-3). pp. 59-64. ISSN 0127-9696

Shah, A. and Izman, S. and Hassan, M. A. and Mustapha, R. (2016) Optimization of chemical pretreatment for removing cobalt on tungsten carbide substrate using response surface methodology. Jurnal Teknologi, 78 (5-10). pp. 16-32. ISSN 0127-9696

Mutia, Reiza and Abang Zaidel, Dayang Norulfairuz and Muhamad, Ida Idayu (2016) Optimization of cocoa butter equivalent production from formulated hard palm oil mid-fraction and canola oil blends. Jurnal Teknologi, 78 (6-12). pp. 127-134. ISSN 0127-9696

Shahperi, R. and Din, M. F. M. and Chelliapan, S. and Aris, M. A. M. and Selvam, S. B. and Abdullah, N. and Yuzir, M. A. M. (2016) Optimization of methane production process from synthetic glucose feed in a multi-stage anaerobic bioreactor. Desalination and Water Treatment, 57 (60). pp. 29168-29177. ISSN 1944-3994

Shahperi, R. and Din, M. F. M. and Chelliapan, S. and Aris, M. A. M. and Selvam, S. B. and Abdullah, N. and Yuzir, M. A. M. (2016) Optimization of methane production process from synthetic glucose feed in a multi-stage anaerobic bioreactor. Desalination and Water Treatment, 57 (60). pp. 29168-29177. ISSN 1944-3994

Mohammed, Jibril and Nasri, Noor .S. and Ahmad Zaini, Muhammad Abbas and Hamza, Usman D. and M. Zain, Husna and Ani, Farid Nasir (2016) Optimization of microwave irradiated - coconut shell activated carbon using response surface methodology for adsorption of benzene and toluene. Desalination and Water Treatment, 57 (17). pp. 7881-7897. ISSN 1944-3994

Nor Azmi, N. F. S. and Mohammed Evuti, A. and Abu Hassan, M. A. and Raja Ibrahim, R. K. (2016) Optimization of non thermal plasma reactor performance for the decomposition of xylene. Jurnal Teknologi, 78 (8). pp. 165-171. ISSN 0127-9696

Zaidi, Nur Syamimi and Muda, Khalida and Sohaili, Johan and Toemen, Susilawati and Yusof, Nur Zulaikha (2016) Optimization of operating parameters for aggregation under magnetic field by response surface methodology. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2419-2425. ISSN 1819-6608

Azri, N. and Bakar, W. A. W. A. and Ali, R. (2016) Optimization of photocatalytic degradation of polybrominated diphenyl ether on trimetallic oxide Cu/Ni/TiO2/PVC catalyst using response surface methodology method. Journal of the Taiwan Institute of Chemical Engineers, 62 . pp. 283-296. ISSN 1876-1070

Darajeh, N. and Fard Masoumi, H. R. and Kalantari, K. and Ahmad, M. B. and Shameli, K. and Basri, M. and Khandanlou, R. (2016) Optimization of process parameters for rapid adsorption of Pb(II), Ni(II), and Cu(II) by magnetic/talc nanocomposite using wavelet neural network. Research on Chemical Intermediates, 42 (3). pp. 1977-1987. ISSN 0922-6168

Ganjali Dashti, M. and Abdeshahian, P. and Sudesh, K. and Phua, K. K. (2016) Optimization of Salmonella Typhi biofilm assay on polypropylene microtiter plates using response surface methodology. Biofouling, 32 (4). pp. 477-487. ISSN 0892-7014

Mansor, A.F. and Mohidem, N.A. and Wan Mohd Zawawi, W.N.I. and Othman, N.S. and Endud, S. and Mat, H. (2016) The optimization of synthesis conditions for laccase entrapment in mesoporous silica microparticles by response surface methodology. Microporous and Mesoporous Materials, 220 . pp. 308-314.

Yusri, I. and Md. Ghazaly, M. and Ali Alandoli, E. A. and Rahmat, M. F. and Abdullah, Z. and Md. Ali, M. A. and Ranom, R. (2016) Optimization of the force characteristic of rotary motion type of electromagnetic actuator based on finite element analysis. Jurnal Teknologi, 78 (9). pp. 13-20. ISSN 0127-9696

Ghazali, N. and Yousif, Q. A. and Pamitran, A. S. and Novianto, S. and Ahmad, R. (2016) Optimization of the friction factor and frictional pressure drop of R22 and R290. International Journal of Technology, 7 (2). pp. 227-234. ISSN 2086-9614

Mohamad, Edy Tonnizam and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Monjezi, Masoud and Majid, Muhd. Zaimi Abd. (2016) An optimized ANN model based on genetic algorithm for predicting ripping production. Neural Computing and Applications . pp. 1-14. ISSN 0941-0643 (In Press)

Ali, S. and Ngadi, M. A. (2016) Optimized interference aware joint channel assignment model for wireless mesh network. Telecommunication Systems, 62 (1). pp. 215-230. ISSN 1018-4864

Waldi, E. P. and Aulia, Aulia and Hazmi, A. and Abral, H. and Arief, S. and Ahmad, M. H. (2016) An optimized method of partial discharge data retrieval technique for phase resolved pattern. Telkomnika (Telecommunication Computing Electronics and Control), 14 (1). pp. 21-28. ISSN 1693-6930

Liew, S. S. and Khalil-Hani, M. and Bakhteri, R. (2016) An optimized second order stochastic learning algorithm for neural network training. Neurocomputing, 186 . pp. 74-89. ISSN 0925-2312

Zainal, Muhammad Thalhah and Mohd. Yasin, Mohd. Fairus and Abdul Wahid, Mazlan (2016) Optimizing flame synthesis of carbon nanotubes: experimental and modelling perspectives. Jurnal Teknologi, 78 (8-4). pp. 133-145. ISSN 0127-9696

Abdullah, M. P. and Nazar, N. S. M. and Hassan, M. Y. and Hussin, F. (2016) Optimizing time of use (ToU) electricity pricing in regulated market. Jurnal Teknologi, 78 (5-7). pp. 49-54. ISSN 0127-9696

Andalib, R. and Abd. Majid, M. Z. and Hussin, M. W. and Ponraj, M. and Keyvanfar, A. and Mirza, J. and Lee, H. S. (2016) Optimum concentration of Bacillus megaterium for strengthening structural concrete. Construction and Building Materials, 118 . pp. 180-193. ISSN 0950-0618

Ing, K. G. and Jamian, J. J. and Mokhlis, H. and Illias, H. A. (2016) Optimum distribution network operation considering distributed generation mode of operations and safety margin. IET Renewable Power Generation, 10 (8). pp. 1049-1058. ISSN 1752-1416

Kamyab, H. and Din, M. F. M. and Hosseini, S. E. and Ghoshal, S. K. and Ashokkumar, V. and Keyvanfar, A. and Shafaghat, A. and Lee, C. T. and Bavafa, A. and Majid, M. Z. A. (2016) Optimum lipid production using agro-industrial wastewater treated microalgae as biofuel substrate. Clean Technologies and Environmental Policy, 18 (8). pp. 2513-2523. ISSN 1618-954X

Chaudhry, A. R. and Ahmed, R. and Irfan, A. and Mohamad, M. and Muhammad, S. and Ul Haq, B. and Al-Sehemi, A. G. and Al-Douri, Y. (2016) Optoelectronic properties of naphtho2, 1-b:6, 5-b'difuran derivatives for photovoltaic application: a computational study. Journal of Molecular Modeling, 22 (10). ISSN 1610-2940

Alamaria, A. and Rahim, A. and Abdullah, T. B. (2016) Oral communication apprehension in EFL learners: an overview. Advanced Science Letters, 22 (12). pp. 4440-4443. ISSN 1936-6612

Ahmad Saufi, Roselina and Kiran, Kumar Thoti (2016) Organization culture practices towards employees. Intercontinental Journal of Human Resource Research Review, 4 (2). pp. 2320-9704. ISSN 2320-9704

Basirudin, N. B. and Basiruddin, R. and Mokhber, M. and Rasid, S. Z. A. and Zamil, N. A. M. (2016) Organizational citizenship bahaviour in public sector: does job satisfaction play a role. International Journal of Economics and Financial Issues, 6 (8Speci). pp. 376-381. ISSN 2146-4138

Basirudin, Norasherin and Basiruddin, Rohaida and Mokhber, Mozhdeh and Abdul Rasid, Siti Zaleha and Mohd. Zamil, Nor Aiza (2016) Organizational citizenship behaviour in public sector: does job satisfaction play a role. Internationl Journal of Economics and Financial Issues, 6 (8). pp. 376-381. ISSN 2146-4138

Kowang, T. O. and Afandi, N. N. B. and Long, C. S. (2016) An organizational quality performance conceptual framework with multiple mediators integration. Advanced Science Letters, 22 (5-6). pp. 1560-1563. ISSN 1936-6612

Gabi, Danlami and Ismail, Abdul Samad and Zainal, Anazida and Zakaria, Zalmiyah and Abraham, Ajith (2016) Orthogonal Taguchi-based cat algorithm for solving task scheduling problem in cloud computing. Neural Computing and Applications . pp. 1-19. ISSN 0941-0643 (In Press)

Reza Mashinchi, M. and Selamat, A. and Ibrahim, S. and Fujita, H. (2016) Outlier elimination using granular box regression. Information Fusion, 27 . pp. 161-169. ISSN 1566-2535

Jahanshaloo, Leila and Che Sidik, Nor Azwadi and Fazeli, Alireza and Mahmoud, Pesaran Hajiabbas (2016) An overview of boundary implementation in lattice boltzmann method for computational heat and mass transfer. International Communications in Heat and Mass Transfer, 78 . pp. 1-12. ISSN 0735-1933

Muhammad, Z. and Sik, K. K. and Johar, F. and Sabri, S. (2016) An overview of critical success factors of publicprivate partnership in the delivery of urban infrastructure and services. Planning Malaysia, 4 (Specia). pp. 147-162. ISSN 1675-6215

Goh, Wan Inn and Mohamad, Noridah and Abdullah, Redzuan and Abdul Samad, Abdul Aziz (2016) Overview of empirical equation prediction for ultimate axial load of precast lightweight foamed concrete sandwich panel (PLFP). ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2366-2371. ISSN 1819-6608

Mohd. Jakarni, F. and Rosli, M. F. and Md. Yusoff, N. I. and Aziz, M. M. A. and Muniandy, R. and Hassim, S. (2016) An overview of moisture damage performance tests on asphalt mixtures. Jurnal Teknologi, 78 (7-2). pp. 91-98. ISSN 0127-9696

Elvin, P. and Abdul Hamid, N. I. N. (2016) Ownership structure, corporate governance and firm performance. International Journal of Economics and Financial Issues, 6 (3). pp. 99-108. ISSN 2146-4138

Wan Abdullah, Wan Nazwanie and Ali, Rusmidah and Wan Abu Bakar, Wan Azlee (2016) Oxidation of commercial petronas diesel with tert-butyl hydroperoxide over polymolybdate alumina supported catalyst modified with alkaline earth metals. Malaysian Journal of Analytical Sciences, 20 (2). pp. 296-302. ISSN 1394-2506

Adam Ali, O. M. and Ahmad Zaini, M. A. and Mohammed Danlami, J. (2016) Oxidation stability of castor oil in solvent extraction. Jurnal Teknologi, 78 (6). pp. 239-244. ISSN 0127-9696

Abd. Khalid, Nur Hafizah and Hussin, Mohd. Warid and Mirza, Jahangir and Ariffin, Nur Farhayu and A. Ismail, Mohamed and Lee, Han Seung and Mohamed, Azman and Putra Jaya, Ramadhansyah (2016) Palm oil fuel ash as potential green micro-filler in polymer concrete. Construction and Building Materials, 102 . ISSN 0950-0618

Manzo, K. and Padfield, R. (2016) Palm oil not polar bears: climate change and development in Malaysian media. Transactions of the Institute of British Geographers, 41 (4). pp. 460-476. ISSN 0020-2754

Alias, Norma and Mohamad Mohsin, Husna and Mustaffa, Maizatul Nadirah and Mohd. Saimi, Siti Hafilah and Reyaz, Ridhwan (2016) Parallel artificial neural network approaches for detecting the behaviour of eye movement using CUDA software on heterogeneous CPU-GPU systems. Jurnal Teknologi, 78 (12-2). pp. 77-85. ISSN 0127-9696

Alias, N. and Suhari, N. N. Y. and Saipol, H. F. S. and Dahawi, A. A. and Saidi, M. M. and Hamlan, H. A. and Teh, C. R. C. (2016) Parallel computing of numerical schemes and big data analytic for solving real life applications. Jurnal Teknologi, 78 (8-2). pp. 151-162. ISSN 0127-9696

Mohd. Siam, Fuaada and Ahmad Kamal, Mohamad Hidayad and Johar, Farhana (2016) Parameter estimation for a mechanistic model of high dose irradiation damage using Nelder-Mead simplex method and genetic algorithm. Jurnal Teknologi, 78 (12-2). pp. 87-92. ISSN 0127-9696

Ibrahim, N. A. and Ahmad Zaini, M. A. (2016) Parametric investigation of fixed-tray, semi-continuous distillation column for ethanol separation from water. Jurnal Teknologi, 78 (11). pp. 85-92. ISSN 0127-9696

Kamardin, K. and Rahim, M. K. A. and Samsuri, N. A. and Jalil, M. E. and Yuhaniz, S. S. and Kama, M. N. and Yusop, O. M. (2016) A parametric study of textile artificial magnetic conductor with wire dipole at 2.45GHZ and 5.8GHZ. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7888-7893. ISSN 1819-6608

Wong, S. L. and Tuan Abdullah, T. A. and Ngadi, N. and Ahmad, A. and Inuwa, I. M. (2016) Parametric study on catalytic cracking of LDPE to liquid fuel over ZSM-5 zeolite. Energy Conversion and Management, 122 . pp. 428-438. ISSN 0196-8904

Aulia, Aulia and Ahmad, M. H. and Abdul-Malek, Z. and Arief, Y. Z. and Lau, K. Y. and Novizon, Novizon (2016) Partial discharge characteristics in LLDPE-natural rubber blends: correlating electrical quantities with surface degradation. Journal of Electrical Engineering and Technology, 11 (3). pp. 699-706. ISSN 1975-0102

Othman, N. A. and M. Piah, M. A. and Adzis, Z. and Al-Geelani, Nasir A. (2016) Partial discharge characterization based on leakage current pulses waveform for contaminated glass insulator string. International Journal of Electrical and Computer Engineering, 6 (2). pp. 835-843. ISSN 2088-8708

Rini, D. P. and Shamsuddin, S. M. and Yuhaniz, S. S. (2016) Particle swarm optimization for ANFIS interpretability and accuracy. Soft Computing, 20 (1). pp. 251-262. ISSN 1432-7643

Adnan, N. N. and Bidin, N. and Taib, N. A. M. and Haris, H. and Fakaruddin, M. and Hashim, A. M. and Krishnan, G. and Harun, S. W. (2016) Passively Q-switched flashlamp pumped Nd:YAG laser using liquid graphene oxide as saturable absorber. Optics and Laser Technology, 80 . pp. 28-32. ISSN 0030-3992

Shahari, Shariza and Phang, Fatin Aliah (2016) Patterns of dialogic teaching for physics excellent teachers. Man in India, 96 (1-2). pp. 589-598. ISSN 0025-1569

Mahat, N. A. and Zainol-Abidin, N. L. and Nordin, N. H. and Abdul-Wahab, R. and Jayaprakash, P. T. (2016) Patterns of oviposition and development of Chrysomya megacephala (Fabricius) (Diptera: Calliphoridae) and Chrysomya rufifacies (Macquart) (Diptera: Calliphoridae) on burned rabbit carcasses. Forensic Science International, 260 . pp. 9-13. ISSN 0379-0738

Lari, Alireza and Sun, Tao and Sultana, Naznin (2016) PEDOT:PSS-containing nanohydroxyapatite/chitosan conductive bionanocomposite scaffold: fabrication and evaluation. Journal of Nanomaterials, 2016 . ISSN 1687-4110

Mohd. Noor, Ahmad Firdaus and Jasmi, Kamarul Azmi and A. Shukor, Khairunnisa (2016) Pembinaan hubungan di antara guru dengan pelajar. Technical and Social Science Journal (TSSJ), 5 (1). pp. 138-148. ISSN 2289-7356

Abdullah, Murihah and Ilias, Mohd. Faeez and Jasmi, Kamarul Azmi and Abdullah, Abdul Hafiz and Rosman, Arieff Salleh (2016) Pembinaan kemahiran insaniah guru Pendidikan Islam di sekolah melalui amalan penggunaan bahan bantu mengajar. e-Jurnal Penyelidikan dan Inovasi, 3 (2-1). pp. 56-72. ISSN 2289-7909

Jamian, Jasrul Jamani and Muhtazaruddin, Mohd. Nabil and Baharudin, Muhammad Ariff (2016) Penalty factor-based optimization algorithm for distributed generation sizing in distribution network. Turkish Journal of Electrical Engineering and Computer Sciences, 24 (3). pp. 1815-1825. ISSN 1300-0632

Mohamed, Sofiah and Jasmi, Kamarul Azmi (2016) Pengetahuan guru Pendidikan Islam prasekolah dalam rangka pembangunan tamadun ummah. Sains Humanika, 8 (3-2). pp. 21-28. ISSN 2289– 6996

Al Amin, A. Q. and Ambrose, A. F. and Masud, M. M. and Azam, M. N. (2016) People purchase intention towards hydrogen fuel cell vehicles: An experiential enquiry in Malaysia. International Journal of Hydrogen Energy, 41 (4). pp. 2117-2127. ISSN 0360-3199

Tan, Owee Kowang and Choi, Sang Long and Rasli, Amran and Goh, Chin Fei (2016) Perception versus performance indicators: a study of innovation performance in a research university. Asian Social Science, 12 (1). pp. 24-29. ISSN 1911-2017

Nawawi, Z. and Aziz, A. S. and Buntat, Z. and Sidik, M. A. B. and Kareem, H. J. and Abdulameer, A. Z. and Aziz, M. A. A. and Jambak, M. I. and Arief, Y. Z. (2016) Performance analysis of a pv/fc hybrid system for generating electricity in Iraqs remote areas. Telkomnika (Telecommunication Computing Electronics and Control), 14 (2). pp. 411-422. ISSN 1693-6930

Abu Bakar, S. H. and Muhammad Sukki, F. and Freier, D. and Ramirez Iniguez, R. and Mallick, T. K. and Munir, A. B. and Mohd. Yasin, S. H. and Abubakar Masud, A. and Bani, N. A. (2016) Performance analysis of a solar window incorporating a novel rotationally asymmetrical concentrator. Energy, 99 . pp. 181-192. ISSN 0360-5442

Ramli, Muhammad Ridduan and Abdul Rahim, Sharul Kamal and Idzam, Mursyidul and Samingan, Muhammad Lokman (2016) Performance analysis of microstrip grid array antenna on different substrates for 5G mobile communication. Journal of Telecommunication, Electronic and Computer Engineering, 8 (6). pp. 1-4. ISSN 2180-1843

Tahir, Muhammad and Saidina Amin, Nor Aishah (2016) Performance analysis of nanostructured NiO-In2O3/TiO2 catalyst for CO2 photoreduction with H2 in a monolith photoreactor. Chemical Engineering Journal, 285 . pp. 635-649. ISSN 1385-8947

Rosli, N. S. and Markom, A. M. and Harun, S. W. and Hamzah, A. (2016) Performance analysis on double pass amplification using ZR-EDF and broadband fiber mirror (BFM). ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3313-3315. ISSN 1819-6608

Ramlan, N. A. and Yahya, W. J. and Ithnin, A. M. and Hasannuddin, A. K. and Norazni, S. A. and Mazlan, N. A. and Sugeng, D. A. and Bahar, N. D. and Koga, T. (2016) Performance and emissions of light-duty diesel vehicle fuelled with non-surfactant low grade diesel emulsion compared with a high grade diesel in Malaysia. Energy Conversion and Management, 130 . pp. 192-199. ISSN 0196-8904

Yulianti, D. and Mandala, S. and Zainal, A. and Nasien, D. and Ngadi, M. A. and Yahaya, C. (2016) Performance comparison of baseline routing protocols in pocket switched network. Jurnal Teknologi, 78 (8-2). ISSN 0127-9696

Galankashi, Masoud Rahiminezhad and Fallahiarezoudar, Ehsan and Moazzami, Anoosh and Mohd. Yusof, Noordin and Syed Hassan, Syed Ahmad Helmi (2016) Performance evaluation of a petrol station queuing system: a simulation-based design of experiments study. Advances in Engineering Software, 92 . pp. 15-26. ISSN 0965-9978

Dziyauddin, R. A. and Doufexi, A. and Kaleshi, D. and Mohd. Sam, S. and Mohamed, N. (2016) Performance Evaluation of Dynamic Burst Mapping in a WiMAX System. Wireless Personal Communications, 91 (3). pp. 1191-1212. ISSN 0929-6212

Hashim, U. R. and Hashim, S. Z. M. and Muda, A. K. (2016) Performance evaluation of multivariate texture descriptor for classification of timber defect. Optik, 127 (15). pp. 6071-6080. ISSN 0030-4026

Ganjehkaviri, Abdolsaeid and Mohd. Jaafar, Mohammad Nazri and Hosseini, Seyed Ehsan and Musthafa, Anas Basri (2016) Performance evaluation of palm oil-based biodiesel combustion in an oil burner. Energies, 9 (2). pp. 1-10. ISSN 1996-1073

Muda, Khalida and Liew, Wai Loan and Kassim, Mohd. Azraai and Loh, Soh Kheang (2016) Performance evaluation of POME treatment plants. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2153-2159. ISSN 1819-6608

Lim, Thol Yong and Yeong, Che Fai and Su, Eileen Lee Ming and Chik, Sheng Fei and Chin, Patrick Jun Hua and Tan, Ping Hua (2016) Performance evaluation of various 2-d laser scanners for mobile robot map building and localization. Journal of Telecommunication, Electronic & Computer Engineering, 8 (11). pp. 105-109. ISSN 21801843

Sharif, Nik Mohamad and Mohd. Ghazali, Normah (2016) Performance of a multi-stack microchannel heat sink. Jurnal Teknologi, 78 (10-2). pp. 61-68. ISSN 0127-9696

Sharif, N. M. and Ghazali, N. M. (2016) Performance of a multi-stack microchannel heat sink. Jurnal Teknologi, 78 (10-2). pp. 61-68. ISSN 0127-9696

Alias, N. and Manaf, A. and Habib, M. (2016) Performance of modified non-linear shooting method for simulation of 2nd order two-point BVPS. Jurnal Teknologi, 78 (8-2). pp. 50-56. ISSN 0127-9696

Ishak, M. S. A. and Illias, S. and Jaafar, M. N. M. (2016) Performance of palm oil-diesel blending inside liquid spray burner. International Journal of Applied Engineering Research, 11 (8). pp. 6003-6006. ISSN 0973-4562

Gholami, M. and Mohd Sam, A. R. and Marsono, A. K. and Tahir, M. M. and Faridmehr, I. (2016) Performance of steel beams strengthened with pultruded CFRP plate under various exposures. Steel and Composite Structures, 20 (5). pp. 999-1022. ISSN 1229-9367

Roslan, Nurul Hidayah and Ismail, Mohammad and Abdul Majid, Zaiton and Ghoreishiamiri, Seyedmojtaba and Muhammad, Bala (2016) Performance of steel slag and steel sludge in concrete. Construction and Building Materials, 104 . pp. 16-24. ISSN 0950-0618

Azahar, W. N. A. W. and Bujang, M. and Jaya, R. P. and Hainin, M. R. and Ngadi, N. and Abdullah, M. M. A. B. (2016) Performance of waste cooking oil in asphalt binder modification. Key Engineering Materials, 700 . pp. 216-226. ISSN 1013-9826

Mohd. Tumari, Siti Zubaidah and Sudirman, Rubita (2016) Performance prediction of working memory retention using event-related potential signal towards children. Jurnal Teknologi, 78 (7-5). pp. 153-160. ISSN 0127-9696

Hasannuddin, A. K. and Wira, J. Y. and Sarah, S. and Wan Syaidatul Aqma, W. M. N. and Abdul Hadi, A. R. and Hirofumi, N. and Aizam, S. A. and Aiman, M. A. B. and Watanabe, S. and Ahmad, M. I. and Azrin, M. A. (2016) Performance, emissions and lubricant oil analysis of diesel engine running on emulsion fuel. Energy Conversion and Management, 117 . pp. 548-557. ISSN 0196-8904

Uwizeye, Christelle and Mohd. Yusoff, Mohd. Fairus and Orikumhi, Igbafe and Johari, Zaharah and Esa, Mazlina (2016) Performances evaluation of reflectarray antenna using different unit cell structures at 12GHz. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Ping, L. L. and Ahmad, U. N. U. and Hee, O. C. (2016) Personality traits and customer-oriented behavior of the Malaysian nurses. International Business Management, 10 (13). pp. 2579-2584. ISSN 1993-5250

Memon, M. A. and Nor, K. M. and Salleh, R. (2016) Personality traits influencing knowledge sharing in student-supervisor relationship: a structural equation modelling analysis. Journal of Information and Knowledge Management, 15 (2). ISSN 0219-6492

Yahya, Fauziah and Jantan, Hafsah and Saleh, Halimatussadiah and Hamdan, Abdul Rahim (2016) Perspective of science lecturers in implementing science curriculum in teacher training college. Man in India, 96 (1-2). pp. 115-126. ISSN 0025-1569

Yahya, Fauziah and Jantan, Hafsah and Saleh, Halimatussadiah and Hamdan, Abdul Rahim (2016) Perspective of science lecturers' in implementing science curriculum in teacher training college. Man in India, 96 (1-2). pp. 115-126. ISSN 0025-1569

Mokri, Siti Salasiah and Saripan, Mohd. Iqbal and Abd. Rahni, Ashrani Aizzuddin and Nordin, Abdul Jalil and Hashim, Suhairul and Marhaban, Mohammad Hamiruce (2016) PET image reconstruction incorporating 3D mean-median sinogram filtering. IEEE Transactions on Nuclear Science, 63 (1). pp. 157-169. ISSN 0018-9499

Baig, U. and Gondal, M. A. and Alam, M. F. and Wani, W. A. and Younus, H. (2016) Pharmacological evaluation of poly(3-methylthiophene) and its titanium(IV)phosphate nanocomposite: DNA interaction, molecular docking, and cytotoxic activity. Journal of Photochemistry and Photobiology B: Biology, 164 . pp. 244-255. ISSN 1011-1344

Rajendra Kumar, G. and Dennyson Savariraj, A. and Karthick, S. N. and Selvam, S. and Balamuralitharan, B. and Kim, H. J. and Viswanathan, K. K. and Vijaykumar, M. and Prabakar, K. (2016) Phase transition kinetics and surface binding states of methylammonium lead iodide perovskite. Physical Chemistry Chemical Physics, 18 (10). pp. 7284-7292. ISSN 1463-9076

Ooi, Y. K. and Yuliati, L. and Lee, S. L. (2016) Phenol photocatalytic degradation over mesoporous TUD-1-supported chromium oxide-doped titania photocatalyst. Cuihua Xuebao/Chinese Journal of Catalysis, 37 (11). pp. 1871-1881. ISSN 0253-9837

Zulkeflle, S. N. M. and Yusaimi, Y. A. and Sugiura, N. and Iwamoto, K. and Goto, M. and Utsumi, M. and Othman, N. B. and Zakaria, Z. and Hara, H. (2016) Phenotypic and genetic characterization of multidrug-resistant Staphylococcus aureus in the tropics of Southeast Asia. Microbiology (United Kingdom), 162 (12). pp. 2064-2074. ISSN 1936-6612

Huda, Miftachul and Jasmi, Kamarul Azmi and Mohamed, Ahmad Kilan @ Ahmad Kilani and Wan Embong, Wan Hassan and Safar, Jimaain (2016) Philosophical investigation of Al-Zarnuji's Ta'lim Al-Muta'allim: strengthening ethical engagement into teaching and learning. Social Sciences (Pakistan), 11 (22). pp. 5516-5519. ISSN 1818-5800

Huda, Miftachul and Jasmi, Kamarul Azmi and Mohamed, Ahmad Kailani and Wan Embong, Wan Hassan and Safar, Jimaain (2016) Philosophical investigation of Al-Zarnujis Talim al-Mutaallim: strengthening ethical engagement into teaching and learning. Social Sciences (Pakistan), 11 (22). pp. 5516-5519. ISSN 1818-5800

Chin, Huei Chaeng and Lim, Cheng Siong and Tan, Michael Loong Peng (2016) Phonon scattering effects in drain-current model of carbon nanotube and silicon nanowire field-effect transistors. Science of Advanced Materials, 8 (5). pp. 1028-1035. ISSN 1947-2935

Abouzari-Lotf, E. and Ghassemi, H. and Mehdipour-Ataei, S. and Shockravi, A. (2016) Phosphonated polyimides: enhancement of proton conductivity at high temperatures and low humidity. Journal of Membrane Science, 516 . pp. 74-82. ISSN 0376-7388

Idris, A. and Majidnia, Z. and Nor Kamarudin, K. S. B. (2016) Photocatalyst treatment for lead(II) using titanium oxide nanoparticles embedded in PVA-alginate beads. Desalination and Water Treatment, 57 (11). pp. 5035-5044. ISSN 1944-3994

Akhmal Saadon, S. and Sathishkumar, P. and Mohd. Yusoff, A. R. and Hakim Wirzal, M. D. and Rahmalan, M. T. and Nur, H. (2016) Photocatalytic activity and reusability of ZnO layer synthesised by electrolysis, hydrogen peroxide and heat treatment. Environmental Technology (United Kingdom), 37 (15). pp. 1875-1882. ISSN 0959-3330

Tahir, B. and Tahir, M. and Amin, N. A. S. (2016) Photocatalytic CO2 conversion over Au/TiO2 nanostructures for dynamic production of clean fuels in a monolith photoreactor. Clean Technologies and Environmental Policy, 18 (7). pp. 2147-2160. ISSN 1618-954X

Tahir, M. and Tahir, B. and Amin, N. A. S. and Muhammad, A. (2016) Photocatalytic CO2 methanation over NiO/In2O3 promoted TiO2 nanocatalysts using H2O and/or H2 reductants. Energy Conversion and Management, 119 . pp. 368-378. ISSN 0196-8904

Delavari, Saeed and Saidina Amin, Nor Aishah (2016) Photocatalytic conversion of CO2 and CH4 over immobilized titania nanoparticles coated on mesh: optimization and kinetic study. Applied Energy, 162 . pp. 1171-1185. ISSN 0306-2619

Xue, Q. and Liu, Y. and Zhou, Q. and Utsumi, M. and Zhang, Z. and Sugiura, N. (2016) Photocatalytic degradation of geosmin by Pd nanoparticle modified WO3 catalyst under simulated solar light. Chemical Engineering Journal, 283 . pp. 614-621. ISSN 1385-8947

Dzinun, Hazlini and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Puteh, Mohd. Hafiz and A. Rahman, Mukhlis and Jaafar, Juhana (2016) Photocatalytic degradation of nonylphenol using co-extruded dual-layer hollow fibre membranes incorporated with a different ratio of TiO2/PVDF. Reactive and Functional Polymers, 99 . pp. 80-87. ISSN 1381-5148

Eleburuike, Naimat Abimbola and Wan Abu Bakar, Wan Azelee and Ali, Rusmidah and Omar, Muhammad Firdaus (2016) Photocatalytic degradation of paraquat dichloride over ceo2-modified tio2 nanotubes and the optimization of parameters by response surface methodology. RSC Advances, 6 (106). pp. 104082-104093. ISSN 2046-2069

Roushenas, P. and Yusop, Z. and Majidnia, Z. and Nasrollahpour, R. (2016) Photocatalytic degradation of spilled oil in sea water using maghemite nanoparticles. Desalination and Water Treatment, 57 (13). pp. 5837-5841. ISSN 1944-3994

Tahir, Beenish and Tahir, Muhammad and Saidina Amin, Nor Aishah (2016) Photocatalytic reverse water gas shift co2 reduction to co over montmorillonite supported tio2 nanocomposite. Chemical Engineering Transactions, 56 . pp. 319-324. ISSN 2283-9216

Elsupikhe, R. F. and Ahmad, M. B. and Shameli, K. and Ibrahim, N. A. and Zainuddin, N. (2016) Photochemical reduction as a green method for the synthesis and size control of silver nanoparticles in κ-Carrageenan. IEEE Transactions on Nanotechnology, 15 (2). pp. 209-213. ISSN 1536-125X

Razak, N. A. and Hashim, S. and Mhareb, M. H. A. and Tamchek, N. (2016) Photoluminescence and thermoluminescence properties of Li2O-Na2O-B2O3 glass. Luminescence, 31 (3). pp. 754-759. ISSN 1522-7235

Majidnia, Z. and Fulazzaky, M. A. (2016) Photoreduction of Pb(II) ions from aqueous solution by titania polyvinylalcohol–alginate beads. Journal of the Taiwan Institute of Chemical Engineers, 66 . pp. 88-96. ISSN 1876-1070

Ismail, S. F. and Sahar, M. R. and Ghoshal, S. K. (2016) Physical and absorption properties of titanium nanoparticles incorporated into zinc magnesium phosphate glass. Materials Characterization, 111 . pp. 177-182. ISSN 1044-5803

Alhamali, Dhawo Ibrahim and Wu, Jiantao and Liu, Quan and Abdul Hassan, Norhidayah and Md. Yusoff, Nur Izzi and Albrka Ali, Shaban Ismael (2016) Physical and rheological characteristics of polymer modified bitumen with nanosilica particles. Arabian Journal for Science and Engineering, 41 (4). pp. 1521-1530. ISSN 1319-8025

Liau, Q. Y. and Leow, C. Y. and Ding, Z. (2016) Physical layer security using two-path successive relaying. Sensors (Switzerland), 16 (6). ISSN 1424-8220

Fan, Yee Van and Lee, Chew Tin and Leow, Chee Woh and Chua, Lee Suan and Sarmidi, Mohamad Roji (2016) Physico-chemical and biological changes during co-composting of model kitchen waste, rice bran and dried leaves with different microbial inoculants. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1447-1457. ISSN 1394-2506

Latifi, Nima and Marto, Aminaton and Eisazadeh, Amin (2016) Physicochemical behavior of tropical laterite soil stabilized with non-traditional additive. Acta Geotechnica, 11 (2). pp. 433-443. ISSN 1861-1125

Mohamed, Mohamad Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd. Mutalib, Muhazri and Abdullah Sani, Nur Aimie and M. Asri, S.E.A. and Ong, Chi Siang (2016) Physicochemical characteristic of regenerated cellulose/N-doped TiO2 nanocomposite membrane fabricated from recycled newspaper with photocatalytic activity under UV and visible light irradiation. Chemical Engineering Journal, 284 . pp. 202-215. ISSN 1385-8947

Alexander, Jock Asanja and Ahmad Zaini, Muhammad Abbas and Abdulsalam, Surajudeen and El-Nafaty, Usman Aliyu and Aroke, Umar Omeiza (2016) Physicochemical characteristics of surface modified Dijah-Monkin bentonite. Particulate Science and Technology . pp. 1-11. ISSN 0272-6351 (In Press)

Sathishkumar, Palanivel and Vennila, Krishnan and Jayakumar, Rajarajeswaran and Mohd. Yusoff, Abdull Rahim and Hadibarata, Tony and Palvannan, Thayumanavan (2016) Phyto-synthesis of silver nanoparticles using Alternanthera tenella leaf extract: an effective inhibitor for the migration of human breast adenocarcinoma (MCF-7) cells. Bioprocess and Biosystems Engineering, 39 (4). pp. 651-659. ISSN 1615-7591

Mohd. Nawi, W. N. R. and Wan Alwi, S. R. and Manan, Z. A. and Kleme\x9A, J. J. (2016) Pinch Analysis targeting for CO2 Total Site planning. Clean Technologies and Environmental Policy, 18 (7). pp. 2227-2240. ISSN 1618-954X

Abdul Majid, F. A. and Teh, L. C. and Yap, L. F. and Poh, S. S. and Mashudin, M. and Abdul Gani, M. (2016) Pineapple is a super fruit, but how much can it be consumed? Acta Horticulturae, 1111 . pp. 203-212. ISSN 0567-7572

Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. and Jayakumar, N. S. (2016) Plam oil empty fruit bunch based magnetic biochar composite comparison for synthesis by microwave-assisted and conventional heating. Journal of Analytical and Applied Pyrolysis, 120 . pp. 521-528. ISSN 0165-2370

Kamardin, K. and Rahim, M. K. A. and Hall, P. S. and Samsuri, N. A. and Latef, T. A. and Ullah, M. H. (2016) Planar textile antennas with artificial magnetic conductor for body-centric communications. Applied Physics A: Materials Science and Processing, 122 (4). ISSN 0947-8396

Abdullah, F. I. and Chua, L. S. and Rahmat, Z. and Samad, A. A. and Wagiran, A. (2016) Plant genomic DNA extraction for selected herbs and sequencing their internal transcribed spacer regions amplified by specific primers. Natural Product Communications, 11 (10). pp. 1491-1496. ISSN 1934-578X

Mohamed, E. and Rahiman, F. A. and Wahab, R. A. and Zain, C. R. C. M. and Javed, M. A. and Huyop, F. (2016) A plant transformation vector containing the gene dehd for the development of cultivars resistant to monochloroacetic acid. Journal of Animal and Plant Sciences, 26 (4). pp. 1133-1139. ISSN 1018-7081

Thakur, Sveta and Singh, Lakhveer and Ab. Wahid, Zularisam and Siddiqui, Muhammad Faisal and Atnaw, Samson Mekbib and Md. Din, Mohd. Fadhil (2016) Plant-driven removal of heavy metals from soil: uptake, translocation, tolerance mechanism, challenges, and future perspectives. Environmental Monitoring and Assessment, 188 (4). ISSN 0167-6369

Haider, Z. and Ali, J. and Arab, M. and Munajat, Y. B. and Roslan, S. and Kamarulzman, R. and Bidin, N. (2016) Plasma diagnostics and determination of lead in soil and Phaleria Macrocarpa leaves by ungated laser induced breakdown spectroscopy. Analytical Letters, 49 (6). pp. 808-817. ISSN 0003-2719

Kam, Kui Lin and Hau, Yuan Wen (2016) Platform independent web-based telecardiology for connected heart care. Jurnal Teknologi (Sciences And Engineering), 78 (7-5). pp. 113-121. ISSN 0127-9696

Asrah, N. M. and Djauhari, M. A. and Mohamad, I. (2016) PLUS traffic highway: an analysis based on time series similarity approach. Social Sciences (Pakistan), 11 (11). pp. 2753-2759. ISSN 1818-5800

Lionheart, William and Ahmad Khairuddin, Taufiq Khairi (2016) Polarization tensor: between biology and engineering. Malaysian Journal of Mathematical Sciences, 10 (S). pp. 179-191. ISSN 1823-8343

Razali, R. and Ikonic, Z. and Indjin, D. and Harrison, P. (2016) Polarization-entangled mid-infrared photon generation in p-doped semiconductor quantum wells. Semiconductor Science and Technology, 31 (11). ISSN 0268-1242

Wan Ibrahim, Wan Aini and Ahmad Rasdy, Nor Fairul Zukry and Muhamad, Norfazilah and Sanagi, Mohd. Marsin (2016) Poly(dimethylsiloxane)-poly(vinyl alcohol) coated solid phase microextraction fiber for chlorpyrifos analysis. Malaysian Journal of Analytical Sciences, 20 (1). pp. 91-101. ISSN 1394-2506

Lau, K. Y. and Vaughan, A. S. and Chen, G. and Hosier, I. L. and Ching, K. Y. and Quirke, N. (2016) Polyethylene/silica nanocomposites: absorption current and the interpretation of SCLC. Journal of Physics D: Applied Physics, 49 (29). ISSN 0022-3727

Alqadami, A. S. M. and Jamlos, M. F. and Soh, P. J. and Kamarudin, M. R. (2016) Polymer (PDMS-Fe3O4) magneto-dielectric substrate for a MIMO antenna array. Applied Physics A: Materials Science and Processing, 122 (1). pp. 1-7. ISSN 0947-8396

Tham, Weng Hong and Wahit, Mat Uzir and Abdul Kadir, Mohammed Rafiq and Wong, Tuck Whye and Hassan, Onn (2016) Polyol-based biodegradable polyesters: a short review. Reviews in Chemical Engineering, 32 (2). pp. 201-221. ISSN 0167-8299

Abdullah, N. and Gohari, R. J. and Yusof, N. and Ismail, Ahmad Fauzi and Juhana, J. and Lau, W. J. and Matsuura, T. (2016) Polysulfone/hydrous ferric oxide ultrafiltration mixed matrix membrane: preparation, characterization and its adsorptive removal of lead (II) from aqueous solution. Chemical Engineering Journal, 289 . pp. 28-37. ISSN 1385-8947

Tang, Ing Hua and Sundari, Rita and Lintang, Hendrik O. and Yuliati, Leny (2016) Polyvinylpyrrolidone as a new fluorescent sensor for nitrate ion. Malaysian Journal of Analytical Sciences, 20 (2). pp. 288-295. ISSN 1394-2506

Souf Aljen, Atef Salem Meftah and Abdul Malik, Adi Maimun and Rahimuddin, Rahimuddin and Mohamad, Noor Zairie (2016) Port capacity forecasting and the impact of the dredging works on port sea operations using discrete event simulation. Jurnal Teknologi, 78 (9-4). pp. 31-40. ISSN 01279696

Murlidhar, B. R. and Mohamad, E. T. and Armaghani, D. J. (2016) Potential alkali silica reactivity of various rock types in an aggregate granite quarry. Measurement: Journal of the International Measurement Confederation, 81 . pp. 221-231. ISSN 0263-2241

Khamis, Nor Hisham and Yahya, Azli and Khalil, Kamal and Mohamad Nor, Alif Syarafi (2016) Potential and sustainability of swiftlet industries in Malaysia. International Journal of Science and Applied Technology, 1 (1). pp. 1-7. ISSN 2528-7354

Garba, N. N. and Ramli, A. T. and Saleh, M. A. and Sanusi, M. S. and Gabdo, H. T. and Aliyu, A. S. (2016) The potential health hazards of chronic exposure to low-dose natural radioactivity in Terengganu, Malaysia. Environmental Earth Sciences, 75 (5). pp. 1-12. ISSN 1866-6280

Sukereman, Anis Syazwani and Suratman, Robiah (2016) Potential of best management practices (BPMS) projects for effective integrated water resource management. Sains Humanika, 8 (4-3). pp. 7-15. ISSN 2289-6996

Tan, S. T. and Hashim, H. and Abdul Rashid, A. H. and Wong, E. K. Y. and Lim, J. S. and Ho, W. S. and Jaafar, A. B. (2016) Potential of biomass to resource as an action to mitigate transboundary haze in ASEAN country. Chemical Engineering Transactions, 52 . pp. 1165-1170. ISSN 2283-9216

Mokhtar, N. M. and Lau, W. J. and Ismail, A. F. and Kartohardjono, S. and Lai, S. O. and Teoh, H. C. (2016) The potential of direct contact membrane distillation for industrial textile wastewater treatment using PVDF-Cloisite 15A nanocomposite membrane. Chemical Engineering Research and Design, 111 . pp. 284-293. ISSN 0263-8762

Nikolic, V. and Petkovic, D. and Por, L. Y. and Shamshirband, S. and Zamani, M. (2016) Potential of neuro-fuzzy methodology to estimate noise level of wind turbines. Mechanical Systems and Signal Processing, 66-67 . pp. 715-722. ISSN 0888-3270

Wirasnita, Riry and Hadibarata, Tony (2016) Potential of the white-rot fungus pleurotus pulmonarius F043 for degradation and transformation of fluoranthene. Pedosphere, 26 (1). pp. 49-54. ISSN 1002-0160

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Mohamed, Azman and Ngadi, Norzita and Jayanti, Dewi Sri (2016) The potential of waste cooking oil as bio-asphalt for alternative binder – an overview. Jurnal Teknologi, 78 (4). pp. 111-116. ISSN 0127-9696

Huseien, G. F. and Mirza, J. and Ismail, M. and Hussin, M. W. and Ariffin, M. A. M. (2016) Potential use coconut milk as alternative to alkali solution for geopolymer production. Jurnal Teknologi, 78 (11). pp. 133-139. ISSN 0127-9696

Reafee, W. and Salim, N. and Khan, A. (2016) The power of implicit social relation in rating prediction of social recommender systems of social recommender. PLoS ONE, 11 (5). ISSN 1932-6203

Liu, W. H. and Kaliappan, K. and Alwi, S. R. W. and Lim, J. S. and Ho, W. S. (2016) power pinch analysis supply side management: strategy on purchasing and selling of electricity. Clean Technologies and Environmental Policy, 18 (8). pp. 2401-2418. ISSN 1618-954X

Shahril, R. and Baharun, S. and Muzahidul Islam, A. K. M. (2016) Pre-processing technique for wireless capsule endoscopy image enhancement. International Journal of Electrical and Computer Engineering, 6 (4). pp. 1617-1626. ISSN 2088-8708

Majid, F. A. A. and Teh, L. C. and Abdullah, S. H. A. S. and Ahmad, R. A. and Taher, M. and Wahid, M. E. A. (2016) Preclinical evidence of Malay traditional herbal supplement for diabetes. Acta Horticulturae, 1125 . pp. 255-262. ISSN 0567-7572

Md. Husin, Maizaitulaidawati and Asmak, Ab. Rahman (2016) Predicting intention to participate in family takaful scheme using decomposed theory of planned behaviour. International Journal of Social Economics, 43 (12). pp. 1351-1366.

Alanazi, H. O. and Abdullah, A. H. and Qureshi, K. N. and Larbani, M. and Al Jumah, M. (2016) Predicting the outcomes of traumatic brain injury using accurate and dynamic predictive model. Journal of Theoretical and Applied Information Technology, 93 (2). pp. 561-570. ISSN 1992-8645

Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Amnieh, Hassan Bakhshandeh and Mohamad, Edy Tonnizam (2016) Prediction and minimization of blast-induced flyrock using gene expression programming and firefly algorithm. Neural Computing and Applications . pp. 1-13. ISSN 0941-0643 (In Press)

Ebrahimi, Ebrahim and Monjezi, Masoud and Khalesi, Mohammad Reza and Armaghani, Danial Jahed (2016) Prediction and optimization of back-break and rock fragmentation using an artificial neural network and a bee colony algorithm. Bulletin of Engineering Geology and the Environment, 75 (1). pp. 27-36. ISSN 1435-9529

Leila, Ezzat Zadegan and Morad, Noor Azian and Yusof, Rubiyah (2016) Prediction and optimization of ethanol concentration in biofuel production using fuzzy neural network. Jurnal Teknologi, 78 (10). pp. 51-56. ISSN 0127-9696

Badyalina, Basri and Shabri, Ani and Mat Jan, Nur Amalina (2016) Prediction at ungauged site with topological kriging and modified group method of data handling. Journal Ofenvironmental Hydrology, 24 . p. 6. ISSN 1058-3912

Khandelwal, M. and Armaghani, D. J. (2016) Prediction of drillability of rocks with strength properties using a hybrid GA-ANN technique. Geotechnical and Geological Engineering, 34 (2). pp. 605-620. ISSN 0960-3182

Shirani Faradonbeh, R. and Jahed Armaghani, D. and Abd. Majid, M. Z. and Md. Tahir, M. and Ramesh Murlidhar, B. and Monjezi, M. and Wong, H. M. (2016) Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction. International Journal of Environmental Science and Technology, 13 (6). pp. 1453-1464. ISSN 1735-1472

Labair, M. and Rached, H. and Rached, D. and Benalia, S. and Abidri, B. and Khenata, R. and Ahmed, R. and Omran, S. and Bouhemadou, A. and Syrotyuk, S. V. (2016) Prediction of phase transition, mechanical and electronic properties of inverse Heusler compound Y2RuPb, via FP-LMTO method. International Journal of Modern Physics C, 27 (9). ISSN 0129-1831

Siswanto, W. A. and Nagentrau, M. and Mohd. Tobi, A. L. and Tamin, M. N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30 (11). pp. 5093-5101. ISSN 1738-494X

Gordan, B. and Jahed Armaghani, D. and Hajihassani, M. and Monjezi, M. (2016) Prediction of seismic slope stability through combination of particle swarm optimization and neural network. Engineering with Computers, 32 (1). pp. 85-97. ISSN 0177-0667

Jajarmizadeh, M. and Sidek, L. M. and Mirzai, M. and Alaghmand, S. and Harun, S. and Majid, M. R. (2016) Prediction of surface flow by forcing of climate forecast system reanalysis data. Water Resources Management, 30 (8). pp. 2627-2640. ISSN 0920-4741

Alavi Nezhad Khalil Abad, Seyed Vahid and Yilmaz, Murat and Jahed Armaghani, Danial and Tugrul, Atiye (2016) Prediction of the durability of limestone aggregates using computational techniques. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press)

Jahed Armaghani, D. and Mohd. Amin, M. F. and Yagiz, S. and Faradonbeh, R. S. and Abdullah, R. A. (2016) Prediction of the uniaxial compressive strength of sandstone using various modeling techniques. International Journal of Rock Mechanics and Mining Sciences, 85 . pp. 174-186. ISSN 1365-1609

Zainudin, Zanariah and Shamsuddin, Siti Mariyam (2016) Predictive analytics in Malaysian dengue data from 2010 until 2015 using BigML. International Journal of Advances in Soft Computing and its Applications, 8 (3). pp. 18-30. ISSN 2074-8523

Mohd. Yunos, Zuriahati and Ali, Aida and Shamsyuddin, Siti Mariyam and Ismail, Noriszura and Sallehuddin, Roselina (2016) Predictive modelling for motor insurance claims using artificial neural networks. International Journal of Advances in Soft Computing and its Applications, 8 (3). pp. 160-172. ISSN 2074-8523

Alamgir, Mahiuddin and Pour, Sahar Hadi and Mohsenipour, Morteza and Hasan, M. Mehedi and Ismail, Tarmizi (2016) Predictors and their domain for statistical downscaling of climate in Bangladesh. Jurnal Teknologi, 78 (6-12). pp. 51-56. ISSN 0127-9696

Hajar, S. and Rashid, M. and Nurnadia, A. and Ammar, M. R. (2016) PrekotAC as a new filter aids material for fabric filter in air filtration system. Jurnal Teknologi, 78 (3-2). pp. 19-24. ISSN 0127-9696

Wan Salleh, Wan Mohd. Nuzul Hakimi and Ahmad, Farediah (2016) Preliminary investigations of in vitro antioxidant, antityrosinase, acetylcholinesterase and anti-inflammatory activities of Actinodaphne species. Marmara Pharmaceutical Journal, 20 (2). pp. 137-143. ISSN 1309-0801

Wan Salleh, Wan Mohd. Nuzul Hakimi and Ahmad, Farediah (2016) Preliminary investigations of in vitro antioxidant, antityrosinase, acetylcholinesterase and anti-inflammatory activities of Actinodaphne species antikolinesteraz ve antienflamatuvar etkilerinin arastirilmasi. Marmara Pharmaceutical Journal, 20 (2). pp. 137-143. ISSN 1309-0801

Teoh, W. K. and Zahari, F. and Shahir, S. (2016) Preliminary investigations on an enzyme immobilized optical biosensor for arsenite detection. Jurnal Teknologi, 78 (10). pp. 17-21. ISSN 0127-9696

Mohd. Asarani, N. A. and Ab. Rahim, N. Z. (2016) Preliminary study of online training implementation from multiple perspectives in Malaysian public sectors. Journal of Theoretical and Applied Information Technology, 90 (1). pp. 77-87. ISSN 1992-8645

Abubakar, M. and Tamin, M. N. and Saleh, M. A. and Uday, M. B. and Ahmad, N. (2016) Preparation and characterization of a Nigerian mesoporous clay-based membrane for uranium removal from underground water. Ceramics International, 42 (7). pp. 8212-8220. ISSN 0272-8842

Bidsorkhi, H. C. and Riazi, H. and Emadzadeh, D. and Ghanbari, M. and Matsuura, T. and Lau, W. J. and Ismail, A. F. (2016) Preparation and characterization of a novel highly hydrophilic and antifouling polysulfone/nanoporous TiO2 nanocomposite membrane. Nanotechnology, 27 (41). ISSN 0957-4484

Abdullah, N. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. (2016) Preparation and characterization of dual layer thin layer lanthanum strontium cobalt ferrite /alumina hollow fiber membrane using dip-coating and brush-coating techniques. Sains Malaysiana, 45 (11). pp. 1715-1721. ISSN 0126-6039

Jusin, Jashiela Wani and Aziz, Madzlan and Sean, Goh Pei and Jaafar, Juhana (2016) Preparation and characterization of graphene-based magnetic hybrid nanocomposite. Malaysian Journal of Analytical Sciences, 20 (1). pp. 149-156. ISSN 1394-2506

Kimi, M. and Yuliati, L. and Shamsuddin, M. (2016) Preparation and characterization of in and Cu co-doped ZnS photocatalysts for hydrogen production under visible light irradiation. Journal of Energy Chemistry, 25 (3). pp. 512-516. ISSN 2095-4956

Hubadillah, S. K. and Harun, Z. and Othman, M. H. D. and Ismail, A. F. and Salleh, W. N. W. and Basri, H. and Yunos, M. Z. and Gani, P. (2016) Preparation and characterization of low cost porous ceramic membrane support from kaolin using phase inversion/sintering technique for gas separation: effect of kaolin content and non-solvent coagulant bath. Chemical Engineering Research and Design, 112 . pp. 24-35. ISSN 0263-8762

Bakhsheshi-Rad, H. R. and Hamzah, E. and Ismail, A. F. and Daroonparvar, M. and Yajid, M. A. M. and Medraj, M. (2016)