Universiti Teknologi Malaysia Institutional Repository

Corrosive characteristics of bioethanol and gasoline blends for metals

Thangavelu, S. K. and Ahmed, A. S. and Ani, F. N. (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 40 (12). pp. 1704-1711. ISSN 0363-907X

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

Corrosive characteristics of lignocellulosic bioethanol on metals, such as mild steel, copper, and aluminum were studied by static immersion test at room temperature. Effect of metals on degradation of fuel properties, such as pHe, total acid number, acidity, density, viscosity, calorific value, flash point, and color changes were evaluated. Moreover, the transformation of water content and oxidation products in the fuel were investigated. Effect of fuel blends on corrosion rate, chemical structure of metals, and morphology of corrosion product were also examined. Results showed that the corrosion of metals in E50 (50% bioethanol and 50% gasoline) is high compared with E25 and E0. Moreover, degradation of fuel properties and compositional changes in E25 and E50 were high compared with E0. The corrosion rate of aluminum in E50 (0.216 mpy) was lower than copper (0.441 mpy) and mild steel (0.487 mpy). Moreover, the corrosion rate of aluminum in E25 (0.096 mpy) was also lower than copper (0.285 mpy) and mild steel (0.297 mpy). It was discovered that corrosion of materials and degradation of fuel properties were 2.4 times high in higher ethanol blends (above E25) compared with lower ethanol blends (up to E25).

Item Type:Article
Uncontrolled Keywords:Aluminum, Carbon steel, Copper, Corrosion, Corrosion rate, Ethanol, Fuels, Gasoline, Metals, Steel, Compositional changes, Corrosion products, Corrosive characteristics, Fuel properties, Gasoline blends, Immersion tests, Oxidation products, Total acid number, Bioethanol
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:71981
Deposited By: Fazli Masari
Deposited On:16 Nov 2017 06:14
Last Modified:16 Nov 2017 06:14

Repository Staff Only: item control page