Universiti Teknologi Malaysia Institutional Repository

Preparation and characterization of self-cleaning alumina hollow fiber membrane using the phase inversion and sintering technique

Abdullah, N. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. and Aziz, A. A. (2016) Preparation and characterization of self-cleaning alumina hollow fiber membrane using the phase inversion and sintering technique. Ceramics International, 42 (10). pp. 12312-12322. ISSN 0272-8842

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

Asymmetric alumina hollow fiber membranes were prepared using the phase inversion technique followed by the sintering process at high temperatures. The ceramic suspensions were formulated by mixing alumina powder with polyethersulfone (PESf), polyethylene glycol-30-dipolyhydroxystearate and N-methyl-2-pyrrolidone (NMP) as the polymer binder, dispersant and solvent, respectively. The objectives of this study were (i) to investigate the effects of spinning parameters, namely, ceramic loading, ceramic to polymer binder ratio, different internal coagulant temperatures and air gap variation on asymmetric structure formation and (ii) to study the self-cleaning properties of alumina hollow fiber membranes. The ceramic hollow fiber membrane was characterized in terms of its viscosity, structural morphology and mechanical strength using a scanning electron microscope (SEM). The results showed that the finger-like structures in alumina hollow fiber membranes could be formed but their patterns were influenced by the ceramic suspension and spinning parameters. Variations in their morphology resulted in significant effects on the mechanical properties and permeability of ceramic hollow fiber membranes. A CuO/CeO2 catalyst was deposited onto the alumina membrane support with the catalyst distribution determined by SEM/EDX. Self-cleaning properties were examined by comparing normal cleaning and self-cleaning properties with irradiation of UV for protein rejection. The result of self-cleaning by UV showed higher bovine serum albumin (BSA) permeation due to super-hydrophilicity of the CuO/CeO2 catalyst.

Item Type:Article
Uncontrolled Keywords:Air cleaners, Alumina, Binders, Bins, Body fluids, Catalysts, Ceramic materials, Ceramic membranes, Cleaning, Copper oxides, Fibers, Hydrophilicity, Ionic liquids, Irradiation, Mechanical permeability, Scanning electron microscopy, Sintered alumina, Sintering, Spinning (fibers), Water bacteriology, Ceramic suspensions, Hollow fiber membranes, Phase inversion, Self cleaning, Sintering process, Ultraviolet irradiations, Membranes
Subjects:T Technology > TP Chemical technology
Divisions:Chemical Engineering
ID Code:72226
Deposited By: Fazli Masari
Deposited On:26 Nov 2017 03:37
Last Modified:26 Nov 2017 03:37

Repository Staff Only: item control page