Universiti Teknologi Malaysia Institutional Repository

Fabrication and viscoelastic characteristics of waste tire rubber based magnetorheological elastomer

Ubaidillah, Ubaidillah and Choi, H. J. and Mazlan, S. A. and Imaduddin, F. and Harjana, Harjana (2016) Fabrication and viscoelastic characteristics of waste tire rubber based magnetorheological elastomer. Smart Materials and Structures, 25 (11). ISSN 0964-1726

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

In this study, waste tire rubber (WTR) was successfully converted into magnetorheological (MR) elastomer via high-pressure and high-temperature reclamation. The physical and rheological properties of WTR based MR elastomers were assessed for performance. The revulcanization process was at the absence of magnetic fields. Thus, the magnetizable particles were allowed to distribute randomly. To confirm the particle dispersion in the MR elastomer matrix, an observation by scanning electron microscopy was used. The magnetization saturation and other magnetic properties were obtained through vibrating sample magnetometer. Rheological properties including MR effect were examined under oscillatory loadings in the absence and presence of magnetic fields using rotational rheometer. The WTR based MR elastomer exhibited tunable intrinsic properties under presentation of magnetic fields. The storage and loss modulus, along with the loss factor, changed with increases in frequency and during magnetization. Interestingly, a Payne effect phenomenon was seen in all samples during dynamic swept strain testing. The Payne effect was significantly increased with incremental increases in the magnetic field. This phenomenon was interpreted as the process of formation-destruction-reformation undergone by the internal network chains in the MR elastomers.

Item Type:Article
Uncontrolled Keywords:Elastomers, Magnetic fields, Magnetism, Magnetization, Plastics, Reclamation, Rheology, Saturation magnetization, Scanning electron microscopy, Tires, High pressure and high temperature, Magnetization-saturation, Magneto-rheological elastomers, Rheological property, Storage and loss modulus, Vibrating sample magnetometer, Visco-elastic characteristics, Waste tires, Rubber
Subjects:T Technology > T Technology (General)
Divisions:Malaysia-Japan International Institute of Technology
ID Code:71975
Deposited By: Fazli Masari
Deposited On:16 Nov 2017 05:28
Last Modified:16 Nov 2017 05:28

Repository Staff Only: item control page