Number of items: 746.
Chong, Yok Kian
(2022)
A 16×2 geiger mode photon counter array automated data acquisition systems in 0.18 μm CMOS Process.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mafroos, Mahroof Mohamed
(2022)
Passively q-switched fiber laser employing graphene and carbon nanotubes saturable absorber.
Masters thesis, Universiti Teknologi Malaysia.
Nik Zain, Nik Nur Anis Awadah
(2022)
Metal based passive saturable absorber embedded in chitin host polymer.
Masters thesis, Universiti Teknologi Malaysia.
Md. Taib, Noor Syazwanee
(2022)
Thermal comfort study in malaysian universities airconditioning office rooms with various set-point temperatures.
Masters thesis, Universiti Teknologi Malaysia.
Zaini, Nursyafiqah
(2022)
Electrical conductivity and rheological properties of magnetorheological plastomer using conductive matrix and graphite for sensor applications.
Masters thesis, Universiti Teknologi Malaysia.
Muftah, Fadhluhartini
(2022)
Structural behaviour of built-up cold-formed steel column under ambient temperature and standard fire.
PhD thesis, Universiti Teknologi Malaysia.
Opia, Anthony Chukwunonso
(2022)
Tribological performance enhancement of rapeseed biolubricant using modified eichhornia crassipes nanoparticles additive.
PhD thesis, Universiti Teknologi Malaysia.
Abdelgader, Abdelrahman Abdelgader Altigani
(2022)
Multi-shape symmetric encryption mechanism for nongeneric attacks mitigation.
PhD thesis, Universiti Teknologi Malaysia.
Misran, Effaliza
(2022)
Pilot scale extraction of crude bromelain from pineapple morris and md2 cultivar using hollow fiber nanofiltration membrane.
PhD thesis, Universiti Teknologi Malaysia.
Nadaraju, Shamala Devi
(2022)
A nutraceutical formulated drink from edible bird‟s nest and collagen with high bioavailability properties.
Masters thesis, Universiti Teknologi Malaysia.
Hasan, Md. Nazibul
(2022)
Flexible wearable thermoelectric generator with vertically aligned architecture of pedot pss and carbon nanotube films.
PhD thesis, Universiti Teknologi Malaysia.
Abdullah, Suhail Najm
(2022)
Microwave milk pasteurization system using coaxial slot radiator.
PhD thesis, Universiti Teknologi Malaysia.
Ansarudin, Farizah
(2022)
Multibeam dielectric lens antenna for 5g mobile base station.
PhD thesis, Universiti Teknologi Malaysia.
Lye, Jimmy Wei Ping
(2022)
Nanoscaled zero valent iron natural zeolites for removal of antibiotics from wastewater.
PhD thesis, Universiti Teknologi Malaysia.
Ahmed Saghir Onaizi, Ali Mohammed
(2022)
Enhancement of mechanical properties of high−volume fly ash concrete using glass nano powder and effective microorganisms.
Masters thesis, Universiti Teknologi Malaysia.
Wee, Boon Khuang
(2022)
An action research on e-commerce adoption for a frozen food manufacturer in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Yang, Chao
(2022)
An action research on the flipped classroom of English teaching in SXT school.
Masters thesis, Universiti Teknologi Malaysia.
Muslim, Nur Nadia
(2022)
Actively quenched SPAD with improved amplification using deep submicron CMOS technology.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Abd. El Moniem El Imam El Khoreby, Mohamed Atef
(2022)
Adaptive background subtraction technique with unique feature representation for vehicle counting.
PhD thesis, Universiti Teknologi Malaysia.
Zahari, Muhammad Raez
(2022)
Adherence to project planning through improved guidelines: a pilot case of USPD (UNIVERSAL SERVICE PROVISION DIVISION).
Masters thesis, Universiti Teknologi Malaysia.
Arumugam, Sharan Kumar
(2022)
Adoption of eco-costs per value ratio concept in construction waste management.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Abd. Hamid, Nur Amirah
(2022)
Alzheimer’s disease classification using attention mechanism and global average pooling on a convolutional neural network.
Masters thesis, Universiti Teknologi Malaysia.
Jamil Khair, Nur Amni
(2022)
Ambiguities in standard form of contract.
Masters thesis, Universiti Teknologi Malaysia.
Zakaria, Nurul Anasuhah
(2022)
Analisis prestasi akademik dan hafazan al-quran dalam kalangan huffaz menggunakan regresi logistik.
Masters thesis, Universiti Teknologi Malaysia.
Azizol, Azam Azizan
(2022)
Analysing the perception & satisfaction of tourism business operators towards quality certification of tourism products: case of MyTQA.
Masters thesis, Universiti Teknologi Malaysia.
Khairullanuar, Mohd. Khairullaznil
(2022)
An analysis of daylighting factor through an application of double skin façade (DSF) in relation to performance and physical activities of sports sciences.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Low, Chun Kang
(2022)
Analysis of device design and material structure on MEMS variable capacitor.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Pungut, Nurulakma
(2022)
Analysis of harmonics issue in grid integration solar photovoltaic system and mitigation method.
Masters thesis, Universiti Teknologi Malaysia.
Jiang, Zhuqian
(2022)
Analysis of the marketing status of chinese medicine clinics.
Masters thesis, Universiti Teknologi Malaysia.
Yeo, Zhi Hao
(2022)
Analysis on the impact of delta T to the performance of chiller.
Masters thesis, Universiti Teknologi Malaysia.
Zaman, Wan Zaizarenah
(2022)
Analysis on the reliability of the existing rural solar-diesel hybrid system to propose sizing of new pv module to reduce cost.
Masters thesis, Universiti Teknologi Malaysia.
Taha, Roslima
(2022)
Ancaman e-dagang ke atas permintaan ruang lantai pusat membeli-belah.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Tan, Dominic Jian Yang
(2022)
Anidolic daylighting system for deep-plan architecture of automotive workshop in the tropics.
Masters thesis, Universiti Teknologi Malaysia.
Mohammed Ali, Marwan
(2022)
Anti islanding protection for Distributed Generation via open loop voltage and current control technique.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Muhammad Sudin, Mazlin
(2022)
Anti-suit injunction in the context of arbitration agreement.
Masters thesis, Universiti Teknologi Malaysia.
Wan Ishak @ Wan Ahmad, Wan Rosidah
(2022)
Antioxidant capacity, physicochemical properties and stability of portulaca oleracea extract gel sunscreen.
Masters thesis, Universiti Teknologi Malaysia.
Ab. Aziz, Mohammad Arshad
(2022)
Application of bamboo as sustainable building material for reducing carbon footprint in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Mohd. Daud, Marjan
(2022)
Application of caputo fraction derivatives to the thermai radiative convective casson flow in a microchannel.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad Kamal, Muhammad Abdullah Adli
(2022)
Application of growth strategies on the performance of Eatalian Express.
Masters thesis, Universiti Teknologi Malaysia.
Ridzuan, Fatin Nabihah Syahira
(2022)
Application of machine learning algorithms for estimating oceanic Chlorophyll-A and nutrients.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Dost, Arzo
(2022)
Application of palm methyl ester sulfonate as green surfactant for interfacial tension and wettability alteration for enhanced oil recovery.
Masters thesis, Universiti Teknologi Malaysia.
Daud, Nur Anati Bazilah
(2022)
Application of phosphoric acid and phytic acid doped polybenzimidazole for high temperature proton exchange membrane fuel cell.
Masters thesis, Universiti Teknologi Malaysia.
Rahman, Md. Mujibur
(2022)
Application of real-time non-surfactant emulsion fuel supply system for common rail diesel engine.
Masters thesis, Universiti Teknologi Malaysia.
Abd. Razak, Janatul Aziera
(2022)
Application of risk assessment models for seismic risk map.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Mansor, Lydiana
(2022)
An approach to manage termination due to national interest in clause 52.0 OF public work department form 203A (REV.1/2010).
Masters thesis, Universiti Teknologi Malaysia.
Geoffrey, Olivia Eyvonnie
(2022)
Arc flash analysis on kimanis power plant switchgears based on IEEE 1584 standard.
Masters thesis, Universiti Teknologi Malaysia.
Ng, Wai Kin
(2022)
Area-optimal cache coherent protocol for many-core network-on-chip.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Liew, Pui Yen
(2022)
Asic implementation of low latency montgomery modular exponentiation.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohd. Nawawi, Noorain
(2022)
Assessing micro entrepreneur personality traits and behaviours via spatial measurement.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mafigiri, Amos
(2022)
Assessing the influence of anthropogenic causal factors on landslide susceptibility in Bukit Antarabangsa.
Masters thesis, Universiti Teknologi Malaysia.
Abdul Rahman, Rashidah
(2022)
Atribut mempengaruhi kadar penghunian bangunan pejabat binaan khas di Wilayah Persekutuan Kuala Lumpur.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdul Mutalib, Nurfariza Akmar
(2022)
Automated visual detection of external welding defect using embedded machine learning.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Khademi, Shahab
(2022)
Automation of hollow fiber membrane fabrication system and optimization of spinning parameters for polymeric membrane in gas separation.
PhD thesis, Universiti Teknologi Malaysia.
Md. Sadollah, Nurhasliza
(2022)
Awareness and knowledge on the issue of unsubscribed mobile content service among mobile users.
Masters thesis, Universiti Teknologi Malaysia.
Razali, Norman
(2022)
An awareness of EDMS implementation At the pre-implementation stage at MCMC.
Masters thesis, Universiti Teknologi Malaysia.
Samsudin, Mohd. Shah Rizal
(2022)
Balanced weighted unified discriminant and distribution alignment for open-view human action recognition.
PhD thesis, Universiti Teknologi Malaysia.
Lee, Ke Yin
(2022)
Barrier analysis approach in metal additive manufacturing implementation with environment consideration.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Yaakub, Nur Zulaikha
(2022)
Behavior of nickel and cadmium ions during struvite crystallization in wastewater.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.
Abdelguiom Mohme, Ghada Ahmed
(2022)
Behavioural intention model of facebook usage for weight loss among young women in Sudan.
PhD thesis, Universiti Teknologi Malaysia.
Jamaludin, Ain Farhana
(2022)
Big data analytical framework in managing maintenance management for government office buildings in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Lee, You Han
(2022)
Bioassays of inflammation pathways from combination of moringa oleifera, capsaicin and menthol.
Masters thesis, Universiti Teknologi Malaysia.
Riyadi, Fatimah Azizah
(2022)
Bioconversion of lignin by oxidative enzymes for lignin depolymerization from tropical bacteria isolates.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Arifin, Nurulhuda
(2022)
Biodegradable poly (ethylene glycol) diacrylate filled aramid nanofiber hydrogel three dimensional printed tissue engineering scaffold.
PhD thesis, Universiti Teknologi Malaysia.
Razali, Muhammad Syafiq
(2022)
Bioleaching of copper from waste printed circuit board by potential bacteria isolated from a landfill.
Masters thesis, Universiti Teknologi Malaysia.
Nordin, Juliana
(2022)
Biological and ecological characterisation of roosting bats and troglofauna in the dark cave conservation site using lidar technology.
Masters thesis, Universiti Teknologi Malaysia.
Mohammad Din, Shahrulnizahana
(2022)
Biosynthesis of antibacterial silver nanoparticles using plant organs of Ficus deltoidea Jack var. kunstleri (King) corner.
PhD thesis, Universiti Teknologi Malaysia.
Othman, Fatin Syahirah
(2022)
Biosynthesis of omega-3 fatty acids in Acutodesmus obliquus.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Azizan, Nur Alyaa Zahida
(2022)
Biotransformation of caffeine, gliclazide and prazosin in an up-flow anaerobic sludge blanket reactor.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Majain, Nelly
(2022)
Bond behaviour of deformed steel rebars in steel fibre high-strength self-compacting concrete.
PhD thesis, Universiti Teknologi Malaysia.
Yosman, Ahmad Firdaus
(2022)
Bonded sequential and parallel insertion-deletion systems in formal language theory.
PhD thesis, Universiti Teknologi Malaysia.
Rosli, Muhammad Haziq
(2022)
Bridge as spatial platform for gallery exhibition at Universiti Teknologi Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohd. Noor, Syahirah
(2022)
Building condition assessment visual inspection online system.
Masters thesis, Universiti Teknologi Malaysia.
Shehzad, Hafiz Muhammad Faisal
(2022)
Building information modeling adoption model for architecture,engineering and construction industry in Malaysia.
PhD thesis, Universiti Teknologi Malaysia.
Wong, Kenvy Chee Vui
(2022)
Can the contract be renegotiated due to covid-19 pandemic?
Masters thesis, Universiti Teknologi Malaysia.
Krishnan, Loganathan
(2022)
Carbon dioxide intensity towards carbon-neutral glove industry.
Masters thesis, Universiti Teknologi Malaysia.
Yussof, Muhammad Haziq
(2022)
Carbon dioxide storage site selection and assessment in the offshore region of malay basin.
Masters thesis, Universiti Teknologi Malaysia.
Rahaman, Muhammad Farhan
(2022)
A case study of office typologies : efficiency of spatial factors for cowork spaces and collaborative activity.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdul Hadi, Aliff Azize
(2022)
Challenges in rescue project towards procurement method.
Masters thesis, Universiti Teknologi Malaysia.
Zaheer, Naeemullah
(2022)
The challenges of deed registration in Khost City District 5, Afghanistan.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Bukar, Babagana
(2022)
Challenges of property taxation implementation in local authorities of Yobe State, Nigeria.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Radeef, Al-dulaimi Hasanain Radhi
(2022)
Characterisation of cracking resistance of polymer modified asphalt mixtures using fracture mechanics and image analysis.
PhD thesis, Universiti Teknologi Malaysia.
Ramlee, Nor Asrina
(2022)
Characteristics of cloud-to-ground lightning based on electric field measurement and high-speed image observation.
PhD thesis, Universiti Teknologi Malaysia.
Kamaruddin, Wan Hairul Anuar
(2022)
Characteristics of neodymium modified borate crystals and glasses grown via polycrystalline seed mediation.
PhD thesis, Universiti Teknologi Malaysia.
Md. Noor, Ahmad Mujahid
(2022)
Characterization and performance evaluation of lignin-based bioflocculants for organic micropollutants in adsorptive coagulation-flocculation process.
PhD thesis, Universiti Teknologi Malaysia.
Elhawary, Shehab Abdelmotaleb Abdelmegeed Ahmed
(2022)
Characterization of flame propagation and burning rates of various mixtures of biogas and nitrous oxide.
PhD thesis, Universiti Teknologi Malaysia.
Faisal, Ummu Habibah
(2022)
Characterization of ligninolytic agrobacterium sp. Strain s2 and identification of the lignin depolymerization enzymes involved.
Masters thesis, Universiti Teknologi Malaysia.
Lee, Ching Yee
(2022)
Characterization of nanosheet transistor logic and its performance.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hamidon, Siti Nur Nashya Azlika
(2022)
Characterization of vinyltriethoxysilanetetraethoxysilane- tetrabutoxytitanate hydrophobic solgel coating fo r photovoltaic panels.
Masters thesis, Universiti Teknologi Malaysia.
Zailani, Muhamad Zulhilmi
(2022)
Chitosan nanoparticle diallyl disulfide complex immobilized polysulfone hollow fibre membrane performance for hemodialysis.
PhD thesis, Universiti Teknologi Malaysia.
Iqbal, Muhammad Naeem
(2022)
Circularly polarized and reconfigurable frequency selective surface based transmit array antenna for x-band applications.
PhD thesis, Universiti Teknologi Malaysia.
Lee, Wei Qi
(2022)
Classification of atrial fibrillation using second order dynamic system with pattern recognition algorithm.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Nagappan, Sarojini Devi
(2022)
Classification of granular features in urban built land using machine learning techniques in Google Earth Engine platform.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Tan, Zheng Yu
(2022)
Classification of lung diseases from X-ray images using deep learning.
Masters thesis, Universiti Teknologi Malaysia.
Mansour Osman, Huda Osman
(2022)
Cloud based privacy preserving data mining model using hybrid k-anonymity and partial homomorphic encryption.
PhD thesis, Universiti Teknologi Malaysia.
Chung, Wei Hong
(2022)
CMOS low noise analog front-end design for multi-lead non-contact electrocardiogram.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ibrahim, Fahmi
(2022)
Coherent Muon to Electron Transition (COMET) phase-i local filtering by catboost algorithm for track reconstruction.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad Izzuddin, Tarmizi
(2022)
Compact and interpretable convolutional neural network architecture for electroencephalogram based motor imagery decoding.
PhD thesis, Universiti Teknologi Malaysia.
Tan, Pei Hong
(2022)
Comparison of 1D VS 2D convolutional neural networks for bird sound detection.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Santhanasamy, Kayverne
(2022)
Comparison of bacterial diversity from goat farm and sewage treatment plant effluent using metagenomic analysis.
Masters thesis, Universiti Teknologi Malaysia.
Idris, Mas’ud
(2022)
Comparison of techno-economic assessment of centralized and distributed hydrogen production using proton exchange electrolysis in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Azali, Muhamad Muizzudin
(2022)
Comparison of the structural properties of silicon carbide using very high frequency plasma enhanced chemical vapour deposition with magnetron sputtering techniques.
Masters thesis, Universiti Teknologi Malaysia.
Adam, Hamza Jees
(2022)
Comparison study of silica and iron oxide nanoparticles as enhanced oil recovery agents.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad Rizal, Nurin Hannah
(2022)
Compressibility behaviour of laterite soil treated with lime under saturated and unsaturated conditions.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.
Mazlan, Mohamad Zahid
(2022)
Computational fluid dynamics analysis and optimization of highway savonius wind turbine integrated with guide vanes.
Masters thesis, Universiti Teknologi Malaysia.
Othman, Nurain
(2022)
Computational fluid dynamics of unsteady aerodynamic wake on helicopter main rotor-hub assembly.
Masters thesis, Universiti Teknologi Malaysia.
Nuar, Ahmad Najmi Amerhaider
(2022)
Computational thinking problem framing artefacts in design science research methodology for Malaysian small and medium enterprises.
PhD thesis, Universiti Teknologi Malaysia.
Al-Rawi, Mohammed A. Sabri
(2022)
Conceptual model of consumer acceptance on mobile commerce in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Muchtar, Farkhana
(2022)
Congestion control scheme for energy efficiency of named data networking based mobile ad hoc network.
PhD thesis, Universiti Teknologi Malaysia.
Ahmad Annuar, Muhammad Asraf
(2022)
Consolidation of arbitration proceedings.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ali, Wahid
(2022)
Constraining the far-field maximum horizontal stress in the plate tectonic area.
PhD thesis, Universiti Teknologi Malaysia.
Hamad, Oras Naji
(2022)
Construction and analysis of the protein interaction network between myeloid and lymphoid leukemia types.
PhD thesis, Universiti Teknologi Malaysia.
Abdullah, Noradilin
(2022)
Construction and characterization of recombinant escherichia coli for production of xylitol from mixed sugars.
PhD thesis, Universiti Teknologi Malaysia.
Manivannan, Govin Kumar
(2022)
Contractors apprehension of doctrine of frustration and Force Majeure clause in construction contracts.
Masters thesis, Universiti Teknologi Malaysia.
Wan Abdul Hamid, Sharifah Fazilah
(2022)
Control strategies for unified power quality conditioner to mitigate voltage sag due to large motor starting during fault.
Masters thesis, Universiti Teknologi Malaysia.
Naser Khamis, Al Shekaili
(2022)
Conversion efficiency and stability of organic solar cells incorporating titanium dioxide with fullerene-based acceptor.
PhD thesis, Universiti Teknologi Malaysia.
Mohammed Sheet, Sinan Salim
(2022)
Convolution neural network for diabetic retinopathy classification with select enhancment algorithm.
PhD thesis, Universiti Teknologi Malaysia.
Alharbi, Emad Ameen
(2022)
Cooling load prediction model during the design of mosques in Madinah.
PhD thesis, Universiti Teknologi Malaysia.
Mohamed Noor, Siti Hawa
(2022)
Copper oxide incorporated polyvinylidene fluoride dual layer hollow fiber photocatalytic membrane for bisphenol a removal.
Masters thesis, Universiti Teknologi Malaysia.
Md. Nor Basmmi, Ain Balqis
(2022)
Core assets development approach using service oriented product line for health care information system.
Masters thesis, Universiti Teknologi Malaysia.
Minhat, Mohd. Sabri
(2022)
Core power control analysis and design for triga nuclear reactor.
PhD thesis, Universiti Teknologi Malaysia.
Bahari, Noraishah
(2022)
Correlation analysis of lightning and flash flood events using pearson model in southeast peninsular Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Muhammad Junaid, Muhammad Junaid
(2022)
Correlation of rock quality designation and resistivity using unmanned aerial vehicle and two-dimensional electrical resistivity tomography.
PhD thesis, Universiti Teknologi Malaysia.
Abdi, Sharmaake Aden
(2022)
Cost and energy model for fiber-to-the-school network.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad Sabri, Muhammad Hilmey Reeza
(2022)
COVID 19 poses threat to Vynn Venture SDN BHD’s financial stability.
Masters thesis, Universiti Teknologi Malaysia.
Rashid, Rashid Taha Siham
(2022)
Cracked concrete surface image classification on low-dimensional image using artificial intelligence algorithms.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Zaidin, Mohd. Azlan
(2022)
The critical success factors of declaration of the universal service provision projects' completion.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Baharudin, Siti Farahida
(2022)
The current practices and improvement strategies for outsourced facilities management services in Malaysian public hospitals.
Masters thesis, Universiti Teknologi Malaysia.
Abdul Waheed, Abdul Waheed
(2022)
Cyclic performance and strengthening of built-up battened columns.
PhD thesis, Universiti Teknologi Malaysia.
Md. Esa, Intan Rahayu
(2022)
Cycling infrastructure in KL: a study of the south-west dedicated bicycle highway.
Masters thesis, Universiti Teknologi Malaysia.
Dzulkefli, Syasya Farina
(2022)
Data sampling methods on imbalanced datasets for pneumonia detection in covid-19 patients.
Masters thesis, Universiti Teknologi Malaysia.
Khalid, Aisyah Atiqah
(2022)
Daylighting performance with courtyard design variant on occupant wellbeing in a tropical climate.
Masters thesis, Universiti Teknologi Malaysia.
Abdullah, Mohamad Hafeezi
(2022)
Deformation behaviour of soft ground treated with a group of bottom ash columns.
PhD thesis, Universiti Teknologi Malaysia.
Fili, Alireza
(2022)
Delay factors in processing the marine policy claims subject to English law settlement.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Yon, Kong Chen
(2022)
Denoising autoencoder in damage detection of pipeline using guided ultrasonic wave.
PhD thesis, Universiti Teknologi Malaysia.
Rosli, Nurul Asyikin
(2022)
Design and analysis of the silicon-based integrated metal-insulator-metal capacitor.
Masters thesis, Universiti Teknologi Malaysia.
Othman, Noor Mohd. Fadzli
(2022)
The design and key features of an energy efficient petrol station - towards achieving an AEMAS EMGS star rating.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Mohamed A. Abid, Fatma
(2022)
Design and synthesis of bioactive compounds containing thiazolidine and thiazolidinone derivatives.
PhD thesis, Universiti Teknologi Malaysia.
Mazlan, Siti Nur Humaira
(2022)
Design for additive manufacturing using triz-am principles in supporting product design and development.
PhD thesis, Universiti Teknologi Malaysia.
Liew, Jun Min
(2022)
Design for intergroup relations: community and welfare centre.
Masters thesis, Universiti Teknologi Malaysia.
Nazeer, Nur Faeqah Ezzah Haneef
(2022)
A design of in-lab voltage measuring kit based on LabVIEW and Arduino application.
Masters thesis, Universiti Teknologi Malaysia.
Rosni, Mohamad Yazid
(2022)
The design of marketing strategy and planning to promote the brand through social media: Pasolla Kitchen Western Food.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Abdul Rahman, Amirul Haiman
(2022)
Detection of rebar corrosion by using ground penetrating radar.
Masters thesis, Universiti Teknologi Malaysia.
Wan Murni, Wan Nurul Akmal
(2022)
Determination of selected biochemical compounds and bioactivity properties of Haq juice.
Masters thesis, Universiti Teknologi Malaysia.
Zainal Abidin, Mohd. Redzuan
(2022)
Developing critical success factors and key performance indicators in managing event program at Malaysian communications and multimedia commission (MCMC).
Masters thesis, Universiti Teknologi Malaysia.
Mansor, Norshahaszalin
(2022)
Development and implementation of information technology knowledge management system.
Masters thesis, Universiti Teknologi Malaysia.
Nazlan, Mohd. Shafiq
(2022)
Development and implementation of online market place in MCMC e-procurement system.
Masters thesis, Universiti Teknologi Malaysia.
Sadiq, Ibrahim Ogu
(2022)
Development and performance evaluation of bioluricant enhanced with nanoparticles for sustainable machining application.
PhD thesis, Universiti Teknologi Malaysia.
Ravindranathan, Rashvin
(2022)
Development of a framework to study and enhance the feasibility of an absorption refrigeration system for space cooling in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Mahli, Abd. Ramlizauyahhudin
(2022)
Development of canopy properties using lidar and high resolution aerial photograph for simulating throughfall in forested area.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Jamil, Nur Hidayati
(2022)
Development of in-situ suspended aggregate microextraction and multi steps stacking-capillary electrophoresis of targeted micropollutants.
Masters thesis, Universiti Teknologi Malaysia.
Zamzuri, Nor Ainn Alfatihah
(2022)
The development of Malaysia’s three-dimensional marine cadastre data model based on land administration domain model.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Said, Nur Afiqah
(2022)
The development of prototype of network coverage system for improving Malaysian Communications And Multimedia Commission (MCMC) Aduan Portal.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Md. Nadzar, Nurul Mardhiah Azura
(2022)
Development of research trends evolution model for computer science for Malaysian publication.
PhD thesis, Universiti Teknologi Malaysia.
Kamarudin, Nurul Fareha
(2022)
The development of scenario planning toolkit to enhance spectrum management strategy in Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Chua, Ai Jiun
(2022)
Development of social discount rate for affordable housing project appraisal in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Zainudin, Nur Ezzatie
(2022)
Development of standard video guide for MCMC procurement systems via screencasting.
Masters thesis, Universiti Teknologi Malaysia.
Ramakrishnan, Mathangi
(2022)
Device simulation of the electrical characteristics in 14nm gaussian channel junctionless finfet.
Masters thesis, Universiti Teknologi Malaysia.
Elsherbeiny, Mohamed Mohamed Takeyeldein
(2022)
Diffuser augmented wind turbine for low-speed wind.
PhD thesis, Universiti Teknologi Malaysia.
Menekher, Murtadha Aryan
(2022)
Digital elevation model in southwestern desert of Iraq using interferometry method from Sentinel-1A images.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ismail, Ainis Roziatul Izwa
(2022)
Digital marketing intervention to improve customer Engagement in Martion Restaurant.
Masters thesis, Universiti Teknologi Malaysia.
Ahmed, Raghad Hatem
(2022)
Distance protection with penetration of Distributed Generation infeed in transmission lines.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Lit, Asrani
(2022)
Distance-aware bidirectional medium access control for mesh wireless network-on-chip architecture.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Zamry, Nurfazrina
(2022)
Distributed anomaly detection scheme based on lightweight data aggregation in wireless sensor network.
PhD thesis, Universiti Teknologi Malaysia.
Iqbal, Zafar
(2022)
Distributed hydrological model using machine learning algorithm for assessing climate change impact.
PhD thesis, Universiti Teknologi Malaysia.
Zainal Abidin, Muhammad Iskandar
(2022)
Domestic youth traveller expenditure pattern: willingness to pay for travel.
Masters thesis, Universiti Teknologi Malaysia.
Muhammad Mussafi, Noor Saif
(2022)
Downside deviation quadratic programming and heuristic approaches for shariah stock portfolio optimization.
PhD thesis, Universiti Teknologi Malaysia.
Jumat, Mohamad Amin
(2022)
Dual-functional surfaces of everolimus immobilised on biodegradable poly(l-lactic acid)/poly(d-lactic acid) scaffold mediated by polydopamine coating for stent development.
PhD thesis, Universiti Teknologi Malaysia.
Pauzan, Mohammad Arif Budiman
(2022)
Dual-layer zirconia-kaolin hollow fibre in membrane contactor for ammonia recovery.
PhD thesis, Universiti Teknologi Malaysia.
Zaidan, Noor Aina
(2022)
Dual-level segmentation method for feature extraction enhancement strategy in speech emotion recognition.
PhD thesis, Universiti Teknologi Malaysia.
Abdullah, Jaharatul Dini Karen Lee
(2022)
Dual-level segmentation method for feature extraction enhancement strategy in speech emotion recognition.
PhD thesis, Universiti Teknologi Malaysia.
Chin, Jia Chun
(2022)
Effect of aeration and anode material on the bioelectricity generation of floating microalgae biophotovoltaic device.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Abdul Wahid, Nurmarni Athirah
(2022)
Effect of climate factors evaluation on hand-foot-and-mouth disease in malaysia using generalized models.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Kadir, Khairul Anwar
(2022)
The effect of dilution oil in the torque performance of magnetorheological grease.
Masters thesis, Universiti Teknologi Malaysia.
Siek, Hock Chai
(2022)
Effect of hull separation ratio and various ship draft to a low-speed catamaran in shallow water.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Tan Shilan, Salihah
(2022)
Effect of milling time on rheological properties of plate- like carbonyl iron particles in magnetorheological fluid.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Tan, Pui Yee
(2022)
Effect of n-methyl-2-pyrrolidone and methanol on the carbon steel corrosion in hybrid monoethanolamine solutions.
Masters thesis, Universiti Teknologi Malaysia.
Puzi Anigrahawati, Puzi Anigrahawati
(2022)
Effect of natural ferrite oxide nanoparticles on structural and magneto optic properties of erbium doped tellurite glass.
PhD thesis, Universiti Teknologi Malaysia.
Abdullah Sani, Abdul Hadi
(2022)
Effect of scouring on pile performance of fixed offshore jacket structures in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Chew, Jie Yi
(2022)
The effect of social media marketing towards catering business brand awareness.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Ab. Saman, Muhammad Hafiz
(2022)
Effect of water column on water depth derived from unmanned aerial vehicle multispectral image.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ahmad, Azrina
(2022)
The effectiveness of maintenance management at government school in Johor.
Masters thesis, Universiti Teknologi Malaysia.
John Jayaraj, Priyangka
(2022)
Effectiveness of quizizz on Emotion expression on a social media platform using mobile brain-computer interfaceschool students’ English grammar learning.
Masters thesis, Universiti Teknologi Malaysia.
Santhiran, Ruthran
(2022)
Effects of filler orientations on electric field of nanodielectrics.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Othman, Bakhtiar Affandy
(2022)
Effects of particle size and grading characteristics on sand matrix soils under monotonic and cyclic loadings.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Ling, Chee Huat
(2022)
Effects of pre-turbocharger turbine water injection on the performance of spark-ignition engine.
Masters thesis, Universiti Teknologi Malaysia.
Sheikh Hussain, Siti Hadrina
(2022)
Efficient denoising, aligment and segmentation algorithm for multivariate heart sound diagnostic.
PhD thesis, Universiti Teknologi Malaysia.
Ng, Kok Heng
(2022)
An efficient march (5n) FSM-based Memory Built-in Self-Test (MBIST) architecture with diagnosis capabilities.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Darus, Nabihah
(2022)
Electrical energy audit and potential energy saving measures for commercial building.
Masters thesis, Universiti Teknologi Malaysia.
Moruma, Muhammad Lawan
(2022)
Electrical power generation of hybrid PV/Wind/Diesel battery system for Gubio Village of Nigeria Gubio Local Government, Borno State, Nigeria.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohamed, Yakub Hussein
(2022)
Electricity load forecasting for power system planning and operation by using artificial neural network.
Masters thesis, Universiti Teknologi Malaysia.
Che Kob, Mohd. Salman
(2022)
Electro-mechanical friction clutch control using proportional derivative plus conditional integral controller.
PhD thesis, Universiti Teknologi Malaysia.
Rakhmania, Rakhmania
(2022)
Electrocoagulation of palm oil mill effluent treatment.
Masters thesis, Universiti Teknologi Malaysia.
Abdul Aziz, Nur Syahirah
(2022)
Electroencephalography signal classification using neural network, decision tree and ensemble bagged tree for epilepsy disease.
Masters thesis, Universiti Teknologi Malaysia.
Olohunde, Sadiq Taoheed
(2022)
Electrophoretic deposition of hydroxyaptite on homogenized magnesium based alloy for biomedical applications.
PhD thesis, Universiti Teknologi Malaysia.
Mohammed Bello, Mohammed Bello
(2022)
Electrospun poly (E-Caprolactone) nanofiber membranes blended with natural antibacterial agents for potential wound dressing applications.
PhD thesis, Universiti Teknologi Malaysia.
Khoo, Sheng Xuan
(2022)
Eletronic properties of boron nitride nanoribbons with single vacancy defect.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Sahree, Suhaimi
(2022)
Elevating learning and development professional pathway for MCMC USPD officers.
Masters thesis, Universiti Teknologi Malaysia.
Alharthi, Aiedh Mrisi
(2022)
Embedded feature selection methods with high dimensionality for elastic net and logistic regression models.
PhD thesis, Universiti Teknologi Malaysia.
Shim, Man Xi
(2022)
Employees’ health & well-being during COVID-19 pandemic: the role of leadership.
Masters thesis, Universiti Teknologi Malaysia.
Jaffar, Suhaila
(2022)
Empowering rural entrepreneur with digital entrepreneurship, a study for community of Beaufort.
Masters thesis, Universiti Teknologi Malaysia.
Mdd. Nordin, Nur Naqiuddin
(2022)
Energy absorption performances of glass-fibre reinforced polymer cylindrical structures under hoop tensile loading.
Masters thesis, Universiti Teknologi Malaysia.
Tuan Sembak, Syed Mohd. Aizuddin
(2022)
Energy audit and retrofit of lighting system at Institut Latihan Perindustrian (ILP) Tangkak, Johor.
Masters thesis, Universiti Teknologi Malaysia.
Zainal Abidin, Mohamed Nadhir
(2022)
Energy benchmarking for office buildings in Putrajaya.
Masters thesis, Universiti Teknologi Malaysia.
Abu Yazaid, Siti Raihana
(2022)
Energy efficiency improvement and cost saving opportunities for the automotive manufacturing industry.
Masters thesis, Universiti Teknologi Malaysia.
Khairi, Ahmad Adzlan Fadzli
(2022)
Energy harvesting by exploiting vortex-induced vibration from a modified cruciform structure.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Shahruddin, Munawar Zaman
(2022)
Energy integrated distillation column sequence.
PhD thesis, Universiti Teknologi Malaysia.
Alhelli, Nawar Saleem Salih
(2022)
Energy management and optimal sizing of a standalone hybrid renewable energy system PV/battery/diesel generator.
EngD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohamad Zahiar, Ummi Aisyah
(2022)
Energy management system for residential solar home system through load shifting.
Masters thesis, Universiti Teknologi Malaysia.
Subramanian, Karthikeyan
(2022)
Energy optimization by using pinch analysis for chlorination process in glove manufacturing plant.
Masters thesis, Universiti Teknologi Malaysia.
Wong, Li Mei
(2022)
Energy storage evaluation under surge load in an off-grid photovoltaic system.
Masters thesis, Universiti Teknologi Malaysia.
Esan, Taiwo Martins
(2022)
Engineering and acoustical properties of gypsum composite materials containing pineapple leaf fibres.
PhD thesis, Universiti Teknologi Malaysia.
Nathaniel, Olukotun
(2022)
Engineering properties of effective microorganism-based tin slag mortar.
PhD thesis, Universiti Teknologi Malaysia.
Muhammad Kaleem, Muhammad Kaleem
(2022)
Enhanced adaptive thermal-aware routing algorithm for network-on-chip.
PhD thesis, Universiti Teknologi Malaysia.
Al-Ashbi, Abdulaziz
(2022)
Enhanced contextual based deep learning model for niqab face detection.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Zainon, Noor Alyanis Farhaida
(2022)
Enhanced fuzzy vault scheme on palm vein biometric template protection using fast walsh Hadamard transformation.
Masters thesis, Universiti Teknologi Malaysia.
Azmi, Nik Mohammad Wafiy
(2022)
Enhanced image-based algorithm for construction of three dimensional zapin animation from monocular video.
Masters thesis, Universiti Teknologi Malaysia.
Dasuki, Massolehin
(2022)
Enhanced internet of things load balancing algorithm with awareness in resources availability.
Masters thesis, Universiti Teknologi Malaysia.
Saeed, Soobia
(2022)
Enhanced k-nearest neighbours classification performance based on segmentation and imputation of missing data.
PhD thesis, Universiti Teknologi Malaysia.
Fadzli, Fazliaty Edora
(2022)
Enhanced life-size holographic telepresence framework with real-time three-dimensional reconstruction for dynamic scene.
PhD thesis, Universiti Teknologi Malaysia.
Abel, Edje Efetobor
(2022)
Enhanced non-parametric sequence learning scheme for internet of things sensory data in cloud infrastructure.
PhD thesis, Universiti Teknologi Malaysia.
Raji, Ishaq Adeyanju
(2022)
Enhanced univariate and multivariate control charts via outliers’ screening technique, robust estimators and varying sample size schemes.
PhD thesis, Universiti Teknologi Malaysia.
Siralan, Arvind
(2022)
Enhancement of cooling system for chlorination dipping process in rubber glove manufacturing.
Masters thesis, Universiti Teknologi Malaysia.
Mohd. Yazair, Muhammad Farid
(2022)
Enhancement of differential global positioning system services in strait of Malacca.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ashabi, Ardavan
(2022)
Enhancement of parallel K-means algorithm for clustering big datasets.
PhD thesis, Universiti Teknologi Malaysia.
Sadali, Mohd. Faizal
(2022)
The enhancement of process parameters to improve microstructures and mechanical properties of TI-6AL-4V alloy produced by selective laser melting.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Al Jumaili, Ahmed AbdulJabbar AbdulKareem
(2022)
Enhancement protection coordination for distribution networks connected with PV using preset-time method.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Azhar, Aiman Hilmi
(2022)
Enhancement to the volte provisioning framework to enable volte in 4g smartphones.
Masters thesis, Universiti Teknologi Malaysia.
Mohammad Othman, Bashar
(2022)
Enhancements of online adaptive lyapunov-based observer for state of charge estimation of lithium-ion batteries.
PhD thesis, Universiti Teknologi Malaysia.
Zulkapli, Muhammad Ashraf
(2022)
Enhancing MCMC performance by using Balanced Score Card: a drive on Malaysia’s digital economy.
Masters thesis, Universiti Teknologi Malaysia.
Alias, Amirul Hakeem
(2022)
Enhancing social interaction of research incubator in Malaysia through integrated spaces.
Masters thesis, Universiti Teknologi Malaysia.
Pachelles, Samson
(2022)
Enhancing the immobilization of cyclodextrin glucanotransferase producing escherichia coli for direct conversion of starch to ß-cyclodextrin.
PhD thesis, Universiti Teknologi Malaysia.
Wong, Poe Mun
(2022)
Enhancing urban farming as a social node via space visibility studies within Kuala Lumpur City Centre.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mythiananthan, Gaury
(2022)
Enhancing workaround processor for manual task processing for policy admin department.
Masters thesis, Universiti Teknologi Malaysia.
Mahmood, Yasir
(2022)
An ensemble model to improve effort estimation accuracy for software development.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Mohd. Hussein, Shamsul Faisal
(2022)
Ensemble modelling of hygrothermal system for multi- objectives model predictive controllers.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Muhammad Firdaus Kumar, Nurhidayah Kumar
(2022)
Entrapment of maltogenic amylase and cyclodextrin glucanotransferase for malto-oligosaccharides synthesis.
Masters thesis, Universiti Teknologi Malaysia.
A. Asiri, Amnah Ismail
(2022)
Epidermal and fibroblast growth factor incorporated polyvinyl alcohol electrospun nanofibers as burn wound dressing scaffold.
PhD thesis, Universiti Teknologi Malaysia.
Mat Yusoff, Rabi’atul ‘Adawiyah
(2022)
Erbium doped fiber lasers utilizing gadolinium oxide, neodymium oxide and samarium oxide as passive saturable absorbers.
PhD thesis, Universiti Teknologi Malaysia.
Muralitharan, Mugilan
(2022)
Ergonomic study on car seat design to improve the comfort of Malaysian drivers.
Masters thesis, Universiti Teknologi Malaysia.
Pishal, Azleen
(2022)
An establishment of an online tourism portal for untapped places.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad, Nor Farah Atiqah
(2022)
Estimation of potential evapotranspiration using multiple linear regression and particle swarm optimization.
PhD thesis, Universiti Teknologi Malaysia.
Subbiah, Surej Kumar
(2022)
Estimation of sand production volume for weak to moderate strength sandstone reservoir using finite element method.
PhD thesis, Universiti Teknologi Malaysia.
Mohamad, Norhafizi
(2022)
Estimation of surface elevation changes underneath mangrove canopy through geospatial and geomorphological approach.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Elshikeri, Nada Badreldin Ibrhim
(2022)
Etching and coating mechanisms evaluation of gold nanoparticles-coated surface plasmon resonance sensors in protic solvents.
PhD thesis, Universiti Teknologi Malaysia.
Suchaad, Saravid
(2022)
Ethereum based blockchain implementation in home automation for decentralized device to device communication.
Masters thesis, Universiti Teknologi Malaysia.
Zakria, Mohamad Hafizi
(2022)
Ethylene yield from a large scale naphtha pyrolysis cracking utilizing response surface methodology.
PhD thesis, Universiti Teknologi Malaysia.
Kusin, Norfazirah
(2022)
Evaluating gastronomy sensory experiences of Sarawak Laksa as alternative destination images.
Masters thesis, Universiti Teknologi Malaysia.
Mok, William Wen Leng
(2022)
Evaluating prediction algorithm of malignant ventricular arrythmia for earlier prediction time on heterogenous databases.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Sutekno, Norlaila Azwa
(2022)
Evaluation of charging-discharging performance of ultracapacitor-battery energy storage system in solar photovoltaic system.
Masters thesis, Faculty of Engineering - School of Electrical Engineering.
Tan, Jou Pei
(2022)
Evaluation of graphene electrode in capturing the changes of muscle activity during flexion and extension.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Noorzai, Mohammad Qasim
(2022)
Evaluation of green infrastructure in Iskandar Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Chandio, Tariq Ali
(2022)
Evaluation of nano silica fluid recovery mechanisms for enhanced oil recovery.
Masters thesis, Universiti Teknologi Malaysia.
Goh, Hui Ying
(2022)
Evaluation of sneak path current in self-rectifying memristor crossbar.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
AbdulHamid, Mohd. Sufian
(2022)
Evaluation of stress and resilience quantification among university students using heart rate variability.
Masters thesis, Universiti Teknologi Malaysia.
Mat Ghani, Suhaida
(2022)
Evaluation of total antioxidant and phytochemical from different maturity of jackfruit leaves using ultrasonic-assisted extraction.
Masters thesis, Universiti Teknologi Malaysia.
Awang, Mohamad Amir
(2022)
Evaluation the effects of arabic gum and sodium caseinate on the quality of medium chain triglycerides powder.
Masters thesis, Universiti Teknologi Malaysia.
Noranuar, Wan Nura’in Nabilah
(2022)
Exact solutions on boundary layer flow and heat transfer of carbon nanotubes nanofluids due to non-coaxial rotations.
Masters thesis, Universiti Teknologi Malaysia.
Marabi, Bahram
(2022)
Experimental and numerical modeling of outrigger systems of tall building structures.
PhD thesis, Universiti Teknologi Malaysia.
Abdullahi, Muhammad
(2022)
Exploring management support and financial resource availability in implementation of technical and vocational education and training policy in Nigeria.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Zakaria, Muhamad Faiz
(2022)
External shading devices as passive daylighting strategy for resting corridor in tropics.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Sivam, Esha Darshini
(2022)
Extraction optimization for Murraya koenigii leaves with high antioxidant and antibacterial properties.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Mohd. Amin, Nur Ain Atiqah
(2022)
Fabrication and characterization of electrospun cellulose acetate/graphene oxide/sodium dodecyl sulphate nanofiber membrane for phosphate ion removal.
Masters thesis, Universiti Teknologi Malaysia.
Jasni, M. Jasmin Fathi
(2022)
Fabrication and characterization of nylon 6, 6, polysulfone and polystyrene electrospun fibre membranes for adsorption of bisphenol a in water.
PhD thesis, Universiti Teknologi Malaysia.
Sabili, Sufi Nazihah
(2022)
Fabrication of nanopore with different parameters in depth and diameter on silicon substrate using one-step focused ion beam milling.
Masters thesis, Universiti Teknologi Malaysia.
Tan, Zhi Wei
(2022)
Face mask detection for covid-19 standard operating procedure by using deep learning.
Masters thesis, Universiti Teknologi Malaysia.
Ja’afar, Saharani
(2022)
Facilities management competencies model for mosque administrator.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Rasidi, Daniel Iskandar Sulaiman
(2022)
Factors and strategies to overcome low adoption of adjudication in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Hussein, Nazatul Syahira
(2022)
Factors influencing customer preference toward e-commerce platforms’ product return service.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdul, Zulhisyam
(2022)
Factors influencing home ownership among public servants in Penang.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ting, Shu Jie
(2022)
The factors of delay in local authorities’ real estate development approval.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Kee, Wee Boon
(2022)
Fake news detection on social media platforms using machine learning algorithms.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohd. Lutpee, Irdina Nadhrah
(2022)
Fault detection and classification using Artificial Neural Network (ANN).
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ali Al-Shatri, Ali Hussein
(2022)
Fault detection and diagnosis using unknown input observer for non-linear chemical processes.
PhD thesis, Universiti Teknologi Malaysia.
Abdalsada, Haider Kamil
(2022)
Fault detection identification for power transformers protection.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Kumareswaran, Dhanesh
(2022)
Feature-based real-time aerial image stitching and quality assessment for post-disaster application.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Tan, Tze Hon
(2022)
Field-programmable gate array based fog analytic node architecture with reconfigurable application plane.
PhD thesis, Universiti Teknologi Malaysia.
Ahams, Summanuwa Timothy
(2022)
First-principles calculations of structural, elastic, electronic and transport properties of vanadium-doped zirconium lead carbide max phase.
PhD thesis, Universiti Teknologi Malaysia.
Arjunaidi, Ayuni Afiqah
(2022)
Fixed multi beam offset spherical reflector antenna at 28 GHZ.
Masters thesis, Universiti Teknologi Malaysia.
Mohamed Din, Mohd. Haniff
(2022)
Flexible housing application of scaffolding system as a tools in sustainable design.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Othman, Nazirah
(2022)
Flexible skin-contact antenna with artifical magnetic conductor for health monitoring application.
PhD thesis, Universiti Teknologi Malaysia.
Maspo, Nur-Adib
(2022)
Flood forecasting using advanced machine learning model and flood susceptibility analysis and mapping using morphometric parameters.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Sabali, Mohd. Alfie
(2022)
Foam stability characterization and performance in the presence of surfactant for gas well deliquification.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Nik Din, Nik Ahmad Munawwar
(2022)
Food security issues and architectural intervention of urban farming in Singapore.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Koo, Zhong Yee
(2022)
Force majeure events in construction industry.
Masters thesis, Universiti Teknologi Malaysia.
Norrulashikin, Muhammad Adam
(2022)
Forecasting emergency trolley drug utilisation using ARMA and SVR with external factors.
Masters thesis, Universiti Teknologi Malaysia.
Mohd. Ghazali, Norizzawati
(2022)
Formation of tunnel barriers and quantum dot structure in suspended carbon nanotubes by focused ion beam for single electron transistor.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Sawal Hamid, Zeenat Begam
(2022)
Formulation and characterization of nutraceutical beverage using guava leaves extract.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Tajuddin, Muhammad Hariz Aizat
(2022)
Forward osmosis thin film composite membrane incorporated with metal organic framework for arsenic (V) removal.
Masters thesis, Universiti Teknologi Malaysia.
Jusoh, Nizar
(2022)
Framework for permit to work assessment.
PhD thesis, Universiti Teknologi Malaysia.
Abu Hasan, Nooradilla
(2022)
Framework for rainfall estimation using X-Band polarimetric radar.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Mohammad Jafri, Nurul Natasha
(2022)
Free standing titanium dioxide hollow nanofibers for photocatalytic degradation of bisphenol A.
Masters thesis, Universiti Teknologi Malaysia.
Mohamad Azhar, Nur Addinni
(2022)
Fuzzy based bidirectional converter for elevator system with supercapacitor.
Masters thesis, Universiti Teknologi Malaysia.
Thangavelu, Sasikala Devi
(2022)
Fuzzy logic based multimodality clinical alarm system for intensive care unit.
PhD thesis, Universiti Teknologi Malaysia.
Biswas, Hasin Abrar
(2022)
Fuzzy PID based navigation of autonomous mobile robot.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ahmad Kamal, Mohamad Hidayad
(2022)
G-Jitter effect on heat and mass transfer of three-dimensional stagnation point nanofluid flow.
PhD thesis, Universiti Teknologi Malaysia.
Safinei, Muhammad Nasrul Anis
(2022)
Gateway as connector to improve the visibility and connectivity of Dusun UTM.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ismail, Nurul Izzaty
(2022)
Generalisations of splicing languages from deoxyribonucleic acid splicing systems.
PhD thesis, Universiti Teknologi Malaysia.
Ramlan, Noor Emi Fadzilah
(2022)
Geographically weighted regression model for spatial downscaling of global precipitation measurements data in Kelantan.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Tang, Kieh Ming
(2022)
Geoid modeling for Klang Valley using least square modification of stokes formula with additive corrections.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohmad Lehan, Nur Fadzlina Aini
(2022)
Geospatial approach for disaster business continuity plan for micro, small and medium enterprise in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Tam, Tze Huey
(2022)
Geospatial approach for flood vulnerability assessment in Kelantan River Basin, Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdulkadir, Aliyu Bello
(2022)
GIS based suitability analysis for siting petrol filling stations in Zaria Local Government, Kaduna State Nigeria.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdul Jalil, Abdul Muizz
(2022)
Goal-seeking navigation based on multi-agent reinforcement learning approach.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hamrayev, Hemra
(2022)
Green synthesis of zinc oxide nanocomposites mediated by biopolymer for anticancer application.
Masters thesis, Universiti Teknologi Malaysia.
Mohamad Sukri, Siti Nur Amalina
(2022)
Green synthesis of zinc oxide silver nanoparticles using punica granatum for antibacterial and anticancer applications.
Masters thesis, Universiti Teknologi Malaysia.
Abbas, Mohamed Redzuan
(2022)
Growth response of different oil palm seedling parentage towards chemical fertilizer treatment.
Masters thesis, Universiti Teknologi Malaysia.
Hamid, Mohd. Norhakem
(2022)
Guidelines for tracheal stent costumization and implantation.
PhD thesis, Universiti Teknologi Malaysia.
Jatmi, Akmal Hakim
(2022)
Habitable bridge acts as smart growth initiative design intervention of urban sprawl.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Al-Wahaibi, Said Bin Khalfan Bin Said
(2022)
Hacking countermeasure framework for oman computer emergency readiness team using delphi approach.
PhD thesis, Universiti Teknologi Malaysia.
Ooi, Tze Kian
(2022)
Hardware/software co-design of two-stage smart arrhythmia classifier based on multi-processor field programmable gate array system-on-chip.
Masters thesis, Universiti Teknologi Malaysia.
Yusoff, Othman Hanafi
(2022)
High-level design and synthesis of VLSI cell placement algorithm.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Yong, Kun Ming
(2022)
High-speed Harris Corner Detection using residue number system.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Tan, Yuan Jie
(2022)
High-speed Robert’s Cross edge detector using residue number system.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Kadir, Norul Hidayah
(2022)
Hull resistance and air-injected ballast free system performance for liquified natural gas ship.
PhD thesis, Universiti Teknologi Malaysia.
Mohamed, Sherif Ibrahim Abdelmaksoud
(2022)
Hybrid active force control for fixed based rotorcraft.
PhD thesis, Universiti Teknologi Malaysia.
Ahmed Taha, Ahmed Eltayeb
(2022)
Hybrid adaptive sliding mode control for quadcopter unmanned aerial vehicle.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Ismail, Mohd. Ismifaizul
(2022)
Hybrid energy harvester using optimised piezoelectric and solar power for self-powered global positioning tracking system.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Harun, Mohd. Hanif
(2022)
Hybrid fractional modified skyhook controller optimized by particle swarm optimization for railway secondary lateral suspension.
PhD thesis, Universiti Teknologi Malaysia.
Mahadi, Shafaruniza
(2022)
Hybrid numerical approach of finite difference and asymptotic interpolation methods for non-newtonian fluids flow.
PhD thesis, Universiti Teknologi Malaysia.
Salleh, Nor ’Asnilawati
(2022)
A hybrid recurrent neural network and long short-term memory for simplified general perturbations-4 model in orbit propagation.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Kamil Riadz, Muhammad Irsyad
(2022)
Hybrid search-based and string similarity-based prioritization technique for regression testing.
Masters thesis, Universiti Teknologi Malaysia.
Mohammad Sabli, Noor Salehan
(2022)
Hybrid water footprint and life cycle assesment of crude palm oil production.
PhD thesis, Universiti Teknologi Malaysia.
Mohamad, Azizah
(2022)
Hybridization of cuckoo search and bat algorithm for optimizing machining performances in deep hole drilling.
PhD thesis, Universiti Teknologi Malaysia.
Kamarudin, Ika Safika
(2022)
Identification of migratory waterbirds hotspot pattern as bioindicator of ecotourism management in Pulau Kukup National Park.
Masters thesis, Universiti Teknologi Malaysia.
A. Haris, Abdul Salam
(2022)
Image reconstruction of upper limb bone fractures using electrical impedance tomography on python framework.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad Jafri, Norsyafiqah Amalina
(2022)
Immobilization of laccase enzyme on magnetically-separable hierarchically-ordered mesocellular mesoporous silica.
Masters thesis, Universiti Teknologi Malaysia.
Rosni, Nurhidayah
(2022)
The impact of covid-19 pandemic on Malaysian workplaces a facilities management perspective.
Masters thesis, Universiti Teknologi Malaysia.
Mohd. Bahar, Mohamad Amirul Fitry
(2022)
Impact of dam and land use change on the flow characteristics of Selangor River basin.
Masters thesis, Universiti Teknologi Malaysia.
Ramays, Tharshini R.
(2022)
Impact of movement control order on small - medium enterprise.
Masters thesis, Universiti Teknologi Malaysia.
Md. Zaini, Nurul Izzaty
(2022)
The impact of social media marketing towards Nazla Enterprise.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Osman, Azahari
(2022)
An impact study on the key success factor in universal service provision projects.
Masters thesis, Universiti Teknologi Malaysia.
Maulad Abd. Rashid, Nur Arina Syafiqah
(2022)
The implementation accounting practices in Lepak Pontian Enterprise.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Mohammad Khedzer, Nur Atikah
(2022)
Implementation of eye tracking technique for human behavior quantification.
Masters thesis, Universiti Teknologi Malaysia.
Md. Dan, Mohammad Adib
(2022)
Implementation of fractal image compression on XPU architecture using intel oneAPI™ approach.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Abdul Rahman, Muhammad Hafifi
(2022)
Implementation of internal audit methodology to strengthen the governance of Malaysian communications and multimedia commission (MCMC).
Masters thesis, Universiti Teknologi Malaysia.
Lee, Khang Xian
(2022)
Implementation of marketing strategy for innovative product to increase sales of Smart Craft Sdn Bhd.
Masters thesis, Universiti Teknologi Malaysia.
Teh, Poh Kee
(2022)
The implementation of social media marketing at Tasik Bumimaju Sdn Bhd.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Halmi, Mohd. Hazwan
(2022)
The implementation of the MCMC official pool vehicle booking system (KERETA2U).
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Hashim, Siti Khadijah
(2022)
Implementing mental health intervention initiative for accelerated leadership program (ALPS) participants in Malaysian communication and multimedia commission.
Masters thesis, Universiti Teknologi Malaysia.
Redzuan, Noor Aisyah
(2022)
Implementing the digital project schedule for employee in PSI Incontrol Sdn. Bhd.
Masters thesis, Universiti Teknologi Malaysia.
Bujang, Nurazhani
(2022)
Implikasi ketidakpatuhan pihak berkuasa tempatan terhadap kelulusan kebenaran merancang dalam konteks memulakan kerja binaan.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
S. Ali, Abidullah
(2022)
Implikasi pembangunan kompleks petroleum bersepadu pengerang terhadap trend pembangunan kediaman.
Masters thesis, Universiti Teknologi Malaysia.
Eu, Thian Meng
(2022)
Implikasi terhadap peserta yang telah menghadiri program-program pelaburan harta tanah.
Masters thesis, Universiti Teknologi Malaysia.
Wee, Ji Quan
(2022)
Importance of community participation for placemaking.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Arbaain, Muhammad Norzid
(2022)
The importance of natural environment in traditional Malay medicine setting in Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Chok, Yong Sheng
(2022)
Improved CNN-based mouth position and status detection.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Yusob, Siti Nur Murni
(2022)
Improved Coulumb Counting method for state of charge estimation of Lithium-ion battery with temperature consideration.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Omran, Alaa Hamzah
(2022)
Improved intelligent method for detection and classification of dc series arc fault in photovoltaic system.
PhD thesis, Universiti Teknologi Malaysia.
Teh, Wei Xin
(2022)
Improved pedestrian detection and distance detection with stereo camera using computer vision.
Masters thesis, Universiti Teknologi Malaysia.
Khan, Saifullah
(2022)
Improved switched-capacitor-based modular t-type inverter topology.
PhD thesis, Universiti Teknologi Malaysia.
Memon, Ahsanullah
(2022)
Improved vector control methods for brushless double fed induction generator during inductive load and fault conditions.
PhD thesis, Universiti Teknologi Malaysia.
Koay, Kevin Chen Rong
(2022)
Improvement in deep reinforcement learning controller for buck-boost converter with constant power load.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hashim, Hanisah
(2022)
An improvement of budget monitoring practices to increase work efficiency at Malaysian communications and multimedia commission (MCMC) state offices.
Masters thesis, Universiti Teknologi Malaysia.
Ruslan, Mohd. Khairudin
(2022)
An improvement of customer adoption of using Self-Service Technologies (SST) At TMPoint Johor.
Masters thesis, Universiti Teknologi Malaysia.
Ibrahim, Mohd. Nizam
(2022)
An improvement of customer experience by using net promoter score (NPS) at TMPoint Johor.
Masters thesis, Universiti Teknologi Malaysia.
Gambaris @ Watimin, Muhammad Aszam
(2022)
The improvement of distribution eficiency among assistant engineer in Negeri Sembilan District Office.
Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Oh, Hui Wen
(2022)
An improvement of employee performance by determining the employee’s job personality at Hawk Soon Hin Industry SDN BHD (HSH).
Masters thesis, Universiti Teknologi Malaysia.
Mohd. Salleh, Nur Adila Suriani
(2022)
An improvement of employees job satisfaction and work performance by using the (leader member exchange) LMX theory at Geomatika University College (GUC).
Masters thesis, Universiti Teknologi Malaysia.
Bahari, Ekiko Chandra
(2022)
The improvement of hub concept at Pt. Marcos Trans Indonesia.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Rosehaizad, Ahmad Faizal
(2022)
Improvement of information quality in digital forensic guideline to increase user satisfaction at digital forensic department MCMC.
Masters thesis, Universiti Teknologi Malaysia.
Rajadran, Katirawaan
(2022)
An improvement of knowledge sharing practice among employees at Selangor and Wilayah Persekutuan state office MCMC.
Masters thesis, Universiti Teknologi Malaysia.
Manap, Shelfiah
(2022)
Improvement of marketing strategies to increase sales of SME business at PASA Skudai Trading.
Masters thesis, Universiti Teknologi Malaysia.
Goh, Wee Yen
(2022)
Improvement of maximum efficiency and torque dynamics for direct torque control drive system.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Rim, Allah Ditha Khan
(2022)
Improvement of mobile coverage analysis process in infrastructure development department through adoption of knowledge creation process.
Masters thesis, Universiti Teknologi Malaysia.
Lim, Danycia Li Oon
(2022)
The improvement of modelling in carbonate reservoir by dual porosity via geological and engineering approach.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Abdul Lani, Mohammad Rizal
(2022)
An improvement of network facilities installation permit application process at Sabah state office MCMC.
Masters thesis, Universiti Teknologi Malaysia.
Muhamad, Md. Nazlee
(2022)
An improvement of operational decision making quality among field operation personnel at Seri Yakin Sdn Bhd (SYSB).
Masters thesis, Universiti Teknologi Malaysia.
Ong, Kai Xin
(2022)
An improvement of parent involvement in early childhood education.
Masters thesis, Universiti Teknologi Malaysia.
Devet, Caroline Angel
(2022)
Improvement of sales promotional strategy for Medicare Pharmacy sustainability.
Masters thesis, Universiti Teknologi Malaysia.
Yeong, Raymond Wei Wen
(2022)
An improvement of work efficiency among employees of a start-up.
Masters thesis, Universiti Teknologi Malaysia.
Hong, Heldora
(2022)
An improvement to the utilization of post on wheel (POW) services in Sandakan, Sabah.
Masters thesis, Universiti Teknologi Malaysia.
Abu Bakar, Aidil Hasinah
(2022)
Improving and accelerating the disciplinary management process system of Jabatan Pendidikan Negeri Johor.
Masters thesis, Universiti Teknologi Malaysia.
Koh, Karin
(2022)
Improving Business Continuity Plan (BCP) to mitigate the impact of COVID-19 on business.
Masters thesis, Universiti Teknologi Malaysia.
Gan, Yee Chuok
(2022)
Improving competitiveness of palm oil fruit dealer to increase the Fresh Fruit Bunches (FFB) Trading.
Masters thesis, Universiti Teknologi Malaysia.
Mohamad Riza, Amirah Nurbalqis
(2022)
Improving environmental quality of hybrid home and working spaces for user comfort.
Masters thesis, Universiti Teknologi Malaysia.
Tan, Choy Soon
(2022)
Improving online teaching and learning quality in Pusat Tuisyen Seri Minda Muda.
Masters thesis, Universiti Teknologi Malaysia.
Daud, Noor Dzulaika
(2022)
Improving performance in micromachining of silicon wafer using heat-assisted micro electrical discharge method.
PhD thesis, Universiti Teknologi Malaysia.
Toh, Sea Ming
(2022)
Improving productivity and reducing the sedentary behaviour of educators in Potensi Jaya Tuition Centre.
Masters thesis, Universiti Teknologi Malaysia.
Wei, Xin
(2022)
Improving sales performance by enhance service marketing at Xiangtianxia Hotpot Restaurant.
Masters thesis, Universiti Teknologi Malaysia.
Mouli Kalli, Nasir Al Tahir
(2022)
Improving sales revenue of Levant Group Sdn. Bhd. using social media platforms during the COVID-19 pandemic.
Masters thesis, Universiti Teknologi Malaysia.
Bhaskaran, Malani Devi
(2022)
Improving the awareness of job rotation among investigation department staff Malaysia Anti Corruption Commission Johor.
Masters thesis, Universiti Teknologi Malaysia.
Wan Hamizan, Wan Nadti Sulida
(2022)
Improving the social media marketing on branding for the Safyina Design Studio.
Masters thesis, Universiti Teknologi Malaysia.
Soib, Husnul Hanani
(2022)
In-vitro wound healing activities of carica papaya leaves extract on human skin fibroblast cell line.
PhD thesis, Universiti Teknologi Malaysia.
Musa, Md. Tahir
(2022)
The inclusive design of content management system for Klik Dengan Bijak.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Masol, Muhammad Yazid
(2022)
Increase efficiency in logistic operation by implementing integrated online system for Fazs's Trading and Services.
Masters thesis, Universiti Teknologi Malaysia.
Raman, Mogana
(2022)
Increasing job satisfaction among employees due to communication barrier by improving the workplace culture in 91 DPOD, Ministry of Defence Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Usat, Selisa
(2022)
The influence of online social networking behaviour towards academic performance of designated secondary school students in Klang Valley.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Haider, Bilal
(2022)
Influence of passive flow control methods on flow topology and stability deritives of muldicon wing.
PhD thesis, Universiti Teknologi Malaysia.
Angsor, Muhammad Aminuddin
(2022)
The influence of tourism on commercial gentrification in Jonker Street, Melaka.
Masters thesis, Universiti Teknologi Malaysia.
Mallum, Isa
(2022)
Influence of waste glass and effective microorganism on the mechanical properties of concrete.
PhD thesis, Universiti Teknologi Malaysia.
Kuppusamy, Puspadevi
(2022)
Information security policy compliance behaviour model for Malaysian federal public sector agencies.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Sk. Abd. Razak, Sk. Muiz
(2022)
Initial crack detection in concrete plate and shell structures using concept of earthquake ground motions.
PhD thesis, Universiti Teknologi Malaysia.
Abdullah, Muhammad Yusuf
(2022)
Innovation business model development for public sector towards innovation policy implementation in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Lee, Mei Xiang
(2022)
Integrated circuit design of a multiplier-accumulator for convolutional neural network based on carry-save adder architecture.
Masters thesis, Universiti Teknologi Malaysia.
Ramli, Muhammad Wafiy Adli
(2022)
Integrated disaster risk index model for the Malaysian local assessment.
PhD thesis, Universiti Teknologi Malaysia.
Wali, Saadu Umar
(2022)
Integrated framework for the assessment of shallow groundwater quality in semiarid basin.
PhD thesis, Universiti Teknologi Malaysia.
Alel, Mohd. Nur Asmawisham
(2022)
Integrated geophysical and geotechnical investigation using machine learning techniques.
EngD thesis, Universiti Teknologi Malaysia.
Howida AbuBaker, Al-Kaaf
(2022)
Integrated information gain with extra tree algorithm for feature permission analysis in android malware classification.
PhD thesis, Universiti Teknologi Malaysia.
Nuhu, Steven Kuba
(2022)
Integrated modelling tool of geospatial criteria for eco-industrial park site selection.
PhD thesis, Universiti Teknologi Malaysia.
Scully, Clement Cornelius
(2022)
Integrated regression and fuzzy model to determine remaining project duration.
PhD thesis, Universiti Teknologi Malaysia.
Zamari, Muhamad Asyraf
(2022)
Integration of geoinformation with geological and geophysical approaches for potential groundwater exploration.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohd. Suhaimi, Hazamy
(2022)
Integration of geospatial technology for assessment of mangrove habitat and riverbank erosion.
Masters thesis, Universiti Teknologi Malaysia.
Razak, Nurul Hanim
(2022)
Integration of product design to supply chain through systems’ approach for diesel, biodiesel and alcohol blends.
PhD thesis, Universiti Teknologi Malaysia.
Beh, Ming Yi
(2022)
Integration of river and community park as place making approach towards Melana River Sport Arena.
Masters thesis, Universiti Teknologi Malaysia.
Khairuddin, Jauhari Tahir
(2022)
Integration of systems and concurrent engineering using artificial intelligence in improving passenger ship preliminari design.
PhD thesis, Universiti Teknologi Malaysia.
Mohamed Samsudin, Amir Irsyad
(2022)
Intelligence performance dashboard for network investigation department.
Masters thesis, Universiti Teknologi Malaysia.
Hussain, Saddam
(2022)
Intelligent feature engineered-machine learning based electricity theft detection framework for labelled and unlabelled datasets.
PhD thesis, Universiti Teknologi Malaysia.
Faruq, Amrul
(2022)
Intelligent flood forecasting model using committee machine learning for early warning system.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Sirkunan, Jeevan
(2022)
Interactive graphical user interface for incentive spirometer.
PhD thesis, Universiti Teknologi Malaysia.
Lau, Tuck Sheng
(2022)
Interactive virtual reality game-based rehabilitation for cerebral palsy children using kinect.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ishak, Siti Hadijah
(2022)
Interference mitigation for wireless sensor network using frequency hopping.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Alshakshouki, Nihad Hamad Faraj
(2022)
Investigation of CO2-foam stability with anionic and nonionic surfctants at different salinities.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Jamaluddin, Ameer Firdaus
(2022)
An investigation of travel vlog content in promoting Responsible Tourist Behaviour.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abd. Amin, Rosyimah
(2022)
Investigation on auto-recloser deadtime for 275kv Kolopis-Segaliud Sabah Grid using PSCAD Software.
Masters thesis, Universiti Teknologi Malaysia.
Misuari, Rosita
(2022)
Investigation on the performance of XLPE cable insulation using tangent delta method.
Masters thesis, Universiti Teknologi Malaysia.
Omar, Inam Mohammedayoub
(2022)
Ionic liquids as additives on the electrodeposition of cobalt, nickel and its alloy onto copper in acidic sulfate bath.
PhD thesis, Universiti Teknologi Malaysia.
Mohammed Raslan, Monzer
(2022)
IoT based real-time monitoring system of rainfall and water level for flood prediction using LSTM network.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Rustamov, Zaur
(2022)
IoT-based portable health monitoring device.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohd. Nawi, Nadiene Salleha
(2022)
Iron oxide modified polyethersulfone hollow fiber membranes with improved hydrophilicity for water treatment.
Masters thesis, Universiti Teknologi Malaysia.
Kamardan, Muhammad Imran Firdaus
(2022)
Isolation and characterization of lignin monomer- degrading bacteria under acidic condition from tropical peatland in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Che Man, Muhammad Afiq
(2022)
Joint common spatial pattern and short-time fourier transform with attention-based convolutional neural networks for brain computer interface.
Masters thesis, Universiti Teknologi Malaysia.
Suhaimin, Syuzairin
(2022)
Kajian impak banjir terhadap nilai harta tanah kediaman di Terengganu.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Zabidi, Siti Nurul Atikah
(2022)
Kajian kesedaran keselamatan dan kesihatan di tempat kerja dalam kalangan pekerja kilang.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad, Siti Zulfaizal
(2022)
Keperluan pembangunan hotel dalam menampung aktiviti pelancongan.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Yusuf, Siti Ayu Zubaidah
(2022)
Kerangka elemen reka bentuk keselamatan kanak-kanak bagi kediaman berbilang tingkat.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Wan Daud, Wan Ahmad Hazman
(2022)
Kerangka kerja pemilikan tanah Orang Asli di semenanjung Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Sahid, Mohd. Shahrizan
(2022)
Kerangka pertimbangan kelulusan permohonan pembangunan ladang solar di atas tanah pertanian di negeri Johor.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Burhan, Ba’Izah
(2022)
Kesan faktor struktur dan faktor lokasi terhadap harga harta tanah kediaman.
Masters thesis, Universiti Teknologi Malaysia.
Md. Nor, Nor Faziha
(2022)
Kesan hakisan pantai terhadap nilai harta tanah kediaman yang terletak di persisir pantai Selat Melaka.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Majuki, Nor Juliana
(2022)
Kesan pandemik Covid-19 ke atas nilai sewaan harta tanah kediaman.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Omar, Shahril
(2022)
Kesan pembangunan Rumah Selangorku terhadap pasaran harta tanah kediaman di negeri Selangor.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mat Derakah, Ahmad Zaki
(2022)
Kesan rebat dan diskaun jualan harga rumah kediaman terhadap nilaian pasaran.
Masters thesis, Universiti Teknologi Malaysia.
Zakaria, Rozana
(2022)
Ketidakseragaman pelarasan ke atas faktor syarat nyata bagi tanah ‘First Grade’ di Pulau Pinang.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Zainabdin, Mohd Izzat
(2022)
Kinetic shading devices for building in tropical climate.
Masters thesis, Universiti Teknologi Malaysia.
Lee, Siew Jing
(2022)
Kinetic shading devices for multi-storey office buidlings in the tropics.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Edrizal, Edrizal
(2022)
Kompetensi pengurus projek kontraktor bagi pembinaan jalan raya di Sumatera Barat Indonesia.
PhD thesis, Universiti Teknologi Malaysia.
Suliman, Suhailizan
(2022)
Kriteria pertimbangan dalam pemberian ulasan dan perakuan permohonan ubahsyarat tanah.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Pailus, Reuben James
(2022)
Land acquisition process improvement for developing communication tower using business intelligence dashboard.
Masters thesis, Universiti Teknologi Malaysia.
Munir, Abdullah
(2022)
Leakage current based online condition monitoring of metal oxide surge arresters with harmonics compensation.
PhD thesis, Universiti Teknologi Malaysia.
Che Ayob, Alia Rafiza
(2022)
Least-squares finite element method for solving stokes equation with a point source magnetic field.
Masters thesis, Universiti Teknologi Malaysia.
Mat Yunus, Nur Khuzaimah
(2022)
Legal issues of smart contracts in blockchain technology.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abd. Rahman, Muhammad Faiz
(2022)
Life cycle cost risk calculator for green highway criteria.
PhD thesis, Universiti Teknologi Malaysia.
Alquraishee, Anser Ghazzaal Ali
(2022)
Lightweight identity based online/offline signature scheme for wireless sensor networks.
PhD thesis, Universiti Teknologi Malaysia.
Zainuddin, Nur Azmira
(2022)
Lignocellulosics biomass biodegradation of water hyacinth and water lettuce by white rot fungi for bioethanol production.
PhD thesis, Universiti Teknologi Malaysia.
Reza Syahrial, Assyahiddin Muhammad
(2022)
Lima Kedai vertical housing : implementing vertical social pockets to improve interaction in social housing.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Amri Aliaman, Zarinah
(2022)
Line fault indicator for sabah rural distribution network.
Masters thesis, Universiti Teknologi Malaysia.
Rabah, Alzuhairi Mustafa
(2022)
Lithium-ion cell balancing using auxiliary battery and DC-DC CUK converter.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Zulkefli, Nor Afifah Hanim
(2022)
A localised multiscale technique in boundary element method for acoustic wave model.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Yusof, Nurul Hannah
(2022)
Logical consensus control for a smart water distribution system.
Masters thesis, Universiti Teknologi Malaysia.
Sharrar, Labib
(2022)
Long short-term memory autoencoder-based anomaly detection system for electric motors.
Masters thesis, Universiti Teknologi Malaysia.
Abdeltawab, Amr. Ahmed Abdelsattar
(2022)
Loose fruit collection using a delta robot.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Muhamad, 'Aisah
(2022)
Low temperature growth of zinc oxide on insulator utilizing graphene buffer layer for transferable electronics.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Zainal Ariffin, Nur Hamizah
(2022)
Low-temperature growth of nitrogen-doped nanocrystalline graphene films by cold-wall plasma assisted chemical vapor deposition for gas sensor application.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Sebri, Kamarul Hisyam
(2022)
The macroeconomic factors affecting housing demand in Malaysia.
Masters thesis, Universiti Teknologi Malaysia.
Mohamad Said, Khairul Anwar
(2022)
Magnetic field induced zinc ferrite distribution in mixed matrix membrane for phenol removal.
PhD thesis, Universiti Teknologi Malaysia.
Mat Noor, Nur Azlina
(2022)
Magnetohydrodynamics squeezing non-newtonian flows with and without nanofluid between two parallel plates in porous medium.
PhD thesis, Universiti Teknologi Malaysia.
Rohim, Muhamad Amirul Sunni
(2022)
Magnetostriction behavior modeling of magnetorheological foam using data-driven neural network algorithm.
Masters thesis, Universiti Teknologi Malaysia.
Tan, Yu Xuan
(2022)
Mask detection using deep learning method.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Nordin, Nurul Aida
(2022)
Mathematical modelling and optimal control of dengue transmission with saturated treatment function and asymptomatic immigration.
PhD thesis, Universiti Teknologi Malaysia.
Tarmizi, Muhammad Saufi
(2022)
Mathematical modelling optimisation of centralised sewage treatment plant for electricity generation.
PhD thesis, Universiti Teknologi Malaysia.
Hananto, April Lia
(2022)
Measurement model of brass plated tyre steel cord based on wave feature extraction.
PhD thesis, Universiti Teknologi Malaysia.
Jusoh@Abd. Rashid, Rusila Zamani
(2022)
Mechanical and rheological properties of ethylene propylene diene monomer based magnetorheological elastomers with silica nanoparticles.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Ezenkwa, Obinna Emmanuel
(2022)
Mechanical, thermal and flammability properties of hybrid rice husk/nanofillers filled polypropylene nanocomposites.
PhD thesis, Universiti Teknologi Malaysia.
Chan, Jia Xin
(2022)
Mechanical, thermal, tribological and flammability properties of hybrid synthetic wollastonite nanofiber/graphene oxide reinforced polybutylene terephthalate nanocomposites.
PhD thesis, Universiti Teknologi Malaysia.
Madrin, Febby Purnama
(2022)
Medical equipment tracking system using hybrid QR code, wi-fi and ultra-wideband.
Masters thesis, Universiti Teknologi Malaysia.
Daud, Nur Sazwani
(2022)
Medium optimization for high cell mass and exopolysaccharides production using paenibacillus polymyxa.
Masters thesis, Universiti Teknologi Malaysia.
Anuar, Nurazira
(2022)
Metal contaminants and chloramphenicol in litopenaeus vannamei and penaeus silasi at various supply chain stages in Johor Bahru, and their health risk assessment.
Masters thesis, Universiti Teknologi Malaysia.
Ismail, Nurul Jannah
(2022)
Metal oxides incorporated bauxite hollow fibre photocatalytic membrane for bisphenol a removal from aqueous solution.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. 'Azuz, Nur 'Zulaikha
(2022)
Metaphorical approaches as interpretative tools in enhancing users engagement of learning centre.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mansor, Muhammad Asraf
(2022)
Microfluidic based impedance flow cytometry-dual microneedles for red blood cell detection.
PhD thesis, Universiti Teknologi Malaysia.
Jamaludin, Nadiah
(2022)
Microstructures of soft clay stabilized with coal ash and cement.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Zamberi, Mahanum
(2022)
Microwave enhanced transesterification of biodiesel from non-edible feedstocks using waste mollusc shells as heterogeneous catalyst.
PhD thesis, Universiti Teknologi Malaysia.
Seah, Mei Qun
(2022)
Mist based interfacial polymerization technique for graphene oxide modified thin film composite nanofiltration membrane.
PhD thesis, Universiti Teknologi Malaysia.
Bakht, Muhamad Paend
(2022)
Mitigating the effect of load shedding in electrical grid using hybrid renewable energy system approach.
PhD thesis, Universiti Teknologi Malaysia.
Izani, Siti Nur Haseela
(2022)
Mixed convection flow of a two-phase dusty fluid and dusty jeffrey fluid due to an exponentially stretching sheet.
PhD thesis, Universiti Teknologi Malaysia.
Koh, Ye Sheng
(2022)
Mobile augmented reality for mobile robot assembly manual.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Abu ElGasim, Ahmed Abdelsalam Mohamed Kheir
(2022)
Mobility management for heterogeneous long term evolution mobile networks based on drive test measurement.
Masters thesis, Universiti Teknologi Malaysia.
Farni, Indra
(2022)
Model faktor kejayaan kritikal projek pembangunan semula perumahan rakyat akibat gempa bumi di Indonesia.
PhD thesis, Universiti Teknologi Malaysia.
Almi, Nurul Aisya
(2022)
Model hubungkait antara faktor kejayaan sistem bina kemudian jual dengan faktor kejayaan projek dalam sistem penyampaian perumahan.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Syed Mustorpha, Sharifah Nurul Akhilah
(2022)
Model keputusan penilaian awal pembangunan bank tanah.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohamed, Su Elya Namira
(2022)
Model of integrating social media data and meteorological data for flood crisis situational awareness.
Masters thesis, Universiti Teknologi Malaysia.
Monaer, Muhammad Syafiq
(2022)
Model predictive control of an overhead crane system.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hassim, Muhammad
(2022)
Modeling flood impact on residential property value.
Masters thesis, Universiti Teknologi Malaysia.
Saharuddin, Kasma Diana
(2022)
Modeling for viscoelastic behaviors of magnetorheological elastomer using single hidden layer feed-forward neural network approaches.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Khafaji, Hasan Neamah Abbas
(2022)
Modeling of lithium-ion battery and state of charge estimation using MATLAB/SIMULINK.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Khong, Fan Hao
(2022)
Modelling and controller design for position tracking of pneumatic actuator system.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Moustafa Hussein, Ahmed Abdalla
(2022)
Modelling and simulation of axial-virtual cathode oscillator using matlab simulink.
Masters thesis, Universiti Teknologi Malaysia.
Teoh, Wei Ting
(2022)
Modelling and simulation of Heteromaterial Dual-Gate Dopingless TFET (HTDGDL-TFET) and its application as digital inverter.
Other thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Azhari Hassan, Shaza Farouk
(2022)
Modelling of traffic delays at roundabout using vissim microsimulation model.
PhD thesis, Universiti Teknologi Malaysia.
Salihu, Rabiu
(2022)
Modification of bacterial cellulose with citric acid and its evaluation for potential application in bone tissue regeneration.
PhD thesis, Universiti Teknologi Malaysia.
Mousa Al-Musawi, Mohammed Imran
(2022)
Modified finite difference time domain modelling of lightning propagation considering non-uniform and frequency dependent soil.
PhD thesis, Universiti Teknologi Malaysia.
Zhou, Zheng
(2022)
Modified parallel coupled line filter for WiFi application.
Masters thesis, Universiti Teknologi Malaysia.
Ling, Philip Chie Hu
(2022)
Modified shipping containers for transtional shelter construction.
PhD thesis, Universiti Teknologi Malaysia.
Che Wil, Norfatmazura
(2022)
Modul intervensi gabungan pendekatan kaunseling Islam dan kaunseling Adler bagi menangani resilien remaja salah laku.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Musa, Nor Alina Shahira
(2022)
Modul intervensi terapi seni lukisan untuk kesejahteraan emosi dan pemikiran dalam kalangan wanita berkerjaya.
Masters thesis, Universiti Teknologi Malaysia.
Richard Louis, Naveen Eugene Louis
(2022)
Molecular dynamics simulations on structural differences of glucose-6-phosphate dehydrogenase deficiency variants among the Asian population.
Masters thesis, Universiti Teknologi Malaysia.
Saeed Nasser, Maged Mohammed
(2022)
Molecular similarity searching based on deep learning for feature reduction.
PhD thesis, Universiti Teknologi Malaysia.
Nejad, Parviz Ghojogh
(2022)
Monitoring urban environmental sustainability greening campus using geospatial technology.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mahat, Faizul Azlee
(2022)
Motivation for the activation of pintar parliament portal toward open & digital government in parliamentary affairs department of MCMC.
Masters thesis, Universiti Teknologi Malaysia.
Aziz, Lubna
(2022)
Multi level refinement enriched feature pyramid network for scale and class imbalance in object detection.
PhD thesis, Universiti Teknologi Malaysia.
Gan, Chi Qian
(2022)
Multi-core 16-bit CPUs for PLC processor.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mansour, Husam Tahseen Mansour
(2022)
Multi-criteria decision-making prototype for the 4th construction revolution implementation readiness using intellectual capital perspective.
PhD thesis, Universiti Teknologi Malaysia.
Arbain, Siti Hajar
(2022)
Multifunctional optimized group method data handling for software effort estimation.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Samsuri, Saiful Farhan
(2022)
Multiobjective model structure optimization using hybrid differential evolution for multivariable dynamic system modeling.
PhD thesis, Universiti Teknologi Malaysia.
Mat Isham, Muhammad Ismail
(2022)
Multiple markers tracking technique as tracked handheld controller for smartphone virtual reality welding application.
Masters thesis, Universiti Teknologi Malaysia.
Akeremale, Olusola Collins
(2022)
Multiscale finite element method for pde constrained optimization in high gradient problems.
PhD thesis, Universiti Teknologi Malaysia.
Baba Gimba, Alhassan
(2022)
Multivariate time series modelling of taxes revenue in Nigeria.
PhD thesis, Universiti Teknologi Malaysia.
Mohamed Abdul Ghani, Nik Noor Aien
(2022)
Muon absolute lifetime evaluation for neutrino nuclear response using ruthenium oxide thin films target.
PhD thesis, Universiti Teknologi Malaysia.
Lee, Ming Yi
(2022)
N-gram feature extraction and Naïve Bayes classifier for malware detection using FPGA implementation.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Daub, Nur Atiqah
(2022)
Nanocomposite of bismuth ferrite and activated carbon for photocatalytic disinfection of microbe.
Masters thesis, Universiti Teknologi Malaysia.
Al-Hadeethi, Muthanna Mohammed Owaid
(2022)
Neural network based self-tuning PID controller for automatic voltage regulator of hydropower plant.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Cheok, Jun Yi
(2022)
Neural network self-tuning PID based navigation control of autonomous unicycle-like mobile robot in industry 4.0.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Husin, Maimun Huja
(2022)
Neural network-based ammonium aeration control of wastewater treatment plant.
PhD thesis, Universiti Teknologi Malaysia.
Jomah Baroud, Muftah Mohamed
(2022)
New rough set based maximum partitioning attribute algorithm for categorical data clustering.
PhD thesis, Universiti Teknologi Malaysia.
Abdulaziz Merghani, Adbulaziz Salah
(2022)
New urbanism principles intervention with CPTED concept in open, guarded neighborhoods and gated community.
Masters thesis, Universiti Teknologi Malaysia.
New, Wee Kiat
(2022)
Non-orthogonal multiple access for cellular-connected unmanned aerial vehicles.
PhD thesis, Universiti Teknologi Malaysia.
Rahman, Mohammad Nurizat
(2022)
Numerical analysis of detonation stability in a rotating detonation engine fuelled with biogas and hydrogen.
PhD thesis, Universiti Teknologi Malaysia.
Md. Dani, Mohamad Airul Amin
(2022)
Numerical analysis on bonding stress of carbon fibre reinforced epoxy.
Masters thesis, Universiti Teknologi Malaysia.
Yaacob, Noorehan
(2022)
Numerical computation for free boundary of ligand and signal transduction associated with the invadopodia formation.
PhD thesis, Universiti Teknologi Malaysia.
Kamis, Nur Ilyana
(2022)
Numerical simulation for thin-film flow of newtonian and casson hybrid nanofluid with heat transfer.
Masters thesis, Universiti Teknologi Malaysia.
Yip, Bao Fang
(2022)
Numerical simulation of capillary flow and curing behaviour of healing agent in encapsulation-based self-healing concrete.
PhD thesis, Universiti Teknologi Malaysia.
Alanazi, Abeer Ayed Khalaf
(2022)
Numerical simulation of the nonlinear schrodinger equation using stable implicit finite difference methods.
PhD thesis, Universiti Teknologi Malaysia.
Yu, Chii Heng
(2022)
Obfuscated computer malware classification based on significant opcode.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Abdul Rahman, Muhammad Hanafi Akmal
(2022)
Object Character Recognition for automatic labelling of pharmaceutical products.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Zainal Abidin, Mohamad Hafizat
(2022)
Off-chain solution for scalable blockchain-based vehicular network.
Masters thesis, Universiti Teknologi Malaysia.
Ghazalli, Shuwaibatul Aslamiah
(2022)
Oil palm fresh fruit bunches ripeness classification with color and texture features extraction.
Masters thesis, Universiti Teknologi Malaysia.
Abd. Karim, Fatin Fazira
(2022)
Omega-3 fatty acids and astaxanthin produced by chlorella vulgaris and haematococcus pluvialis cultivated in chicken manure medium.
Masters thesis, Universiti Teknologi Malaysia.
Koay, Xian Hong
(2022)
One shot learning for acoustics classification of Malaysia bird species.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Khurshid, Muhammad Mahboob
(2022)
Open government data adoption model for public sector organizations in Pakistan.
PhD thesis, Universiti Teknologi Malaysia.
Miskam, Mohd. Rezal
(2022)
Operator readiness towards adventure tourism safety procedure during covid – 19. A case study of rafting activities in Gopeng, Perak.
Masters thesis, Universiti Teknologi Malaysia.
Oraibi, Al Iedani Saleh Khairullah
(2022)
Optimal relay coordination for power system connected to distribution generators using particle swarm optimization.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Heng, Joe Eu
(2022)
Optimisation of 3D point cloud model for asset navigation.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohamed Esivan, Siti Marsilawati
(2022)
Optimisation of co-culture fermentation of lactobacillus casei and propionibacterium jensenii in rice bran extract.
PhD thesis, Universiti Teknologi Malaysia.
Ismail, Noor Faizah
(2022)
Optimisation of enzymatic reactions for galactooligosaccharides synthesis using beta-galactanase from Geobacillus mahadii Geo-05.
PhD thesis, Universiti Teknologi Malaysia.
Aziz Japar, Wan Mohd. Arif
(2022)
Optimisation of hybrid microchannel heat sink with secondary channel under laminar flow condition.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Abdul Raof, Azhar
(2022)
Optimising resources and energy efficiency in grassroots eco-industrial park by selecting the optimal tenant companies.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Nordin, Norhafiza
(2022)
Optimization of cascade low-pressure steam heating and organic acid pre-treatment on pineapple wastes for fermentable sugars production.
Masters thesis, Universiti Teknologi Malaysia.
Prakash, Shantini
(2022)
Optimization of chlorination cooling systems in glove manufacturing industry for maximum energy recovery.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Azali, Muhamad Muizzudin
(2022)
Optimization of vhf-pecvd deposition parameters for silicon carbide film using in-situ and in-line gas phase analysis.
Masters thesis, Universiti Teknologi Malaysia.
Md. Roslan, Muhammad Syafiq
(2022)
Optimized monomodal image registration using cuckoo search algorithm.
Masters thesis, Universiti Teknologi Malaysia.
Yusoff, Ahmad Razali
(2022)
An optimized volume determination method based on aerial photogrammetry approach for sustainable environment.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Suhaimi, Siti Nurulasilah
(2022)
Optimizing pigment production from agricultural waste using metaheuristic-based algorithms.
PhD thesis, Universiti Teknologi Malaysia.
Zulkifli, Muhammad Aniq Razin
(2022)
Optimum period of structural health monitoring for ageing fixed offshore platform.
Masters thesis, Universiti Teknologi Malaysia.
Alshaya, Ali Mohammed
(2022)
Organizational talent management initiatives and practices in construction industry.
Masters thesis, Universiti Teknologi Malaysia.
Majid Mohammed, Lina
(2022)
Overcurrent relay coordination with different penetration in distributed generation.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Anuar, Sarah Herul
(2022)
Overcurrent relay for generation distribution utilization.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Aminuddin, Nordin
(2022)
An overview performance of particle swarm optimization for Economic Dispatch.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Png, Ricky Keh Jing
(2022)
A parallel built-in self-test design for photon counting array.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hassan, Yahaya
(2022)
Parameter estimation for optimised number of beds in hospital planning design.
PhD thesis, Universiti Teknologi Malaysia.
Ab. Aziz, Nur Shahidah
(2022)
Parametric and thermal analysis of horizontal jet flames.
PhD thesis, Universiti Teknologi Malaysia.
Mat Saman, Norhafezaidi
(2022)
Partial discharge and breakdown strength of cross-linked plyethylene nanocomposits containing plasma-treated silicon dioxide nanoparticles.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Faizel Amri, 'Umar
(2022)
The path planning control of two wheeled mobile robot using extended Kalman Filter technique.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Karim, Nor Diyana
(2022)
Pematuhan lokasi rumah mampu milik dengan pengunaan aplikasi GIS.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Zakaria, Yusri
(2022)
Penambahbaikan proses dan prosedur pendaftaran urusniaga tanah bagi mengatasi penipuan dan pemalsuan.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohd. Ramaly, Bazilah
(2022)
Penambahbaikan tatacara pengurusan permohonan pecah bahagian tanah.
Masters thesis, Universiti Teknologi Malaysia.
Osman, Marena
(2022)
Pengekstrakan butiran topografi berasaskan kecerdasan buatan dari imej beresolusi tinggi bagi pemetaan berskala 1:5000.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abd. Hashim, Siti Hamnah
(2022)
Pengetahuan masyarakat berkenaan lembaga rayuan dalam pembangunan tanah di Majlis Bandaraya Johor Bahru.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mohamed Nor, Dina Azleema
(2022)
Peranan amalan kelestarian sebagai pengantara ke atas hubungan di antara latihan pekerja dan prestasi Universiti Awam Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Abdullah, Ruzita
(2022)
Perbezaan harga rumah pasaran primer dan sekunder di daerah Sepang Selangor.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Tan, Eng Peik
(2022)
Perbezaan nilaian dari segi faktor pemilikan bagi Tanah Rizab Melayu dan Tanah Luar Rizab Melayu di negeri Perak.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Almabrook, Ragab Hamd Younes
(2022)
The perception of rural community on Libya 2020 vision in improving livelihood in Tripoli, Libya.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Arif, Amirul Haffiz
(2022)
Perekayasaan permohonan pembangunan tanah secara serah balik kurnia semula di negeri Johor.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Lam, Yi Ling
(2022)
Performance analysis of ISFET biosensor with different structures.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Adewumi, Adeshina Adewale
(2022)
Performance and modeling of volcanic ash and limestone powder waste binary blended alkali activated mortar.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.
Yee, Chun Kit
(2022)
Performance comparison of grid connected photovoltaic system with energy storage system under malaysia renewable energy programs.
Masters thesis, Universiti Teknologi Malaysia.
P'ng, Boon Ho
(2022)
Performance evaluation of graphene based priority encoder for analog to digital converter application.
Masters thesis, Universiti Teknologi Malaysia.
Chan, Jia Zhen
(2022)
Performance evaluation of graphene nanoribbon-based differential amplifier.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Voon, Vivian Li Sin
(2022)
Performance evaluation of single-stage differential amplifier based on carbon nanotube.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mamat, Rosmawati
(2022)
Performance of bitumen improved with coconut shell activated carbon additives.
PhD thesis, Universiti Teknologi Malaysia.
Kamarudin, Siti Nur Naqibah
(2022)
Performance of hot mix asphalt incorporating treated crumb rubber and treated plastic additives using dry process.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.
Majeed, Faraj Saeid Adrees
(2022)
Performance of minimum quantity lubrication using paraffin based nanofluids during hard turning of AISI420 stainless steel.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Abd. Halim, Nur Hidayah
(2022)
Performance of porous concrete block with different size of coarse aggregate for pavement.
PhD thesis, Universiti Teknologi Malaysia.
Abdel Rhman, Rasha Abuel Gasim
(2022)
Performance of soft ground improved by floating bottom ash columns.
PhD thesis, Universiti Teknologi Malaysia.
Auwalu, Abubakar Sharif
(2022)
Performance of steel bolt connected industrialized building system subjected to hydrodynamic force with debris.
PhD thesis, Universiti Teknologi Malaysia.
Ali, Zulfiqar
(2022)
Performance of warm mix asphalt containing coal bottom ash as alternative aggregate.
PhD thesis, Universiti Teknologi Malaysia.
Abu Bakar, Noor Suriana
(2022)
Personalisation framework for Malaysian m-government service.
PhD thesis, Universiti Teknologi Malaysia.
Al-Qadasi, Ammar Mohammed Ali
(2022)
Phoneme duration scheme for tajweed medd rules recognition in qur’an recitation.
PhD thesis, Universiti Teknologi Malaysia.
Alka, Sadiya
(2022)
Phytobial remediation of arsenic-contaminated soil using Melastoma malabathricum L. and Microbacterium foliorum strain SZ1.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Tee, Bun Pin
(2022)
Pile structural deformation using intrumented test pile with distributed fibre optic sensor.
PhD thesis, Universiti Teknologi Malaysia.
Lim, Ki Min
(2022)
Polyimide based mixed matrix nanofiltration membrane for refining palm oil.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Tey, Hui Yin
(2022)
Polymer inclusion membrane sampling probe for electric field driven extraction of doxorubicin.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Yusefi, Mostafa
(2022)
Polysaccharide-based magnetic nanocomposites as drug carriers for potential colorectal cancer treatment.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Sirkunan, Navein
(2022)
Position tracking of underwater vehicle using extended Kalman Filter.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Nor Muhammad, Nor Aziah Amirah
(2022)
Poultry esophagus detection using retinanet and mask region-based convolutional neural network object detection model.
Masters thesis, Universiti Teknologi Malaysia.
Che Marzuki, Nur Haziqah
(2022)
Pouteria campechiana pulp ethanol-water extract as a bioactive ingredient for topical delivery of oil-in-water nanoemulsion.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Lim, Calvin
(2022)
Power efficient blockchain miner accelerator design.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Roslan, Nuraini
(2022)
The practice of private ownership on the beach and implication towards public access to the beach.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mazlan, Muhammad Amri
(2022)
Predetonation properties of rotating supersonic combustion engine at varying equivalence ratio.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Ahmad, Hafiz Ishfaq
(2022)
Predicate based association rules mining with new interestingness measure.
PhD thesis, Universiti Teknologi Malaysia.
Al-Obaidy, Mustafa Mudhafar Shawkat
(2022)
Prediction model of fluid flow behavior in the naturally fractured reservoirs by machine learning.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Mohamad Shabari, Ahmad Nasuha
(2022)
Prediction of sonic log using petrophysical logs via machine learning technique.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Mohd. Yassin, Zaris Izzati
(2022)
Premature failure detection of distribution transformer with unbalanced harmonic loads using hotspot temperature analysis.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ibharm, Siti Fatimah
(2022)
Preparation and characterization of quercetin-loaded folic acid TPGS micelles against MCF-7 breast cancer cell line.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.
Sa'adon, Shafizah
(2022)
Preparation, characterization and pharmacokinetic release of diclofenac sodium-dual layer polyvinyl alcohol patch for transdermal delivery.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.
Joe, Edgar Jr.
(2022)
Probabilistic-based prediction of rainfall-induced landslides.
PhD thesis, Universiti Teknologi Malaysia.
Kamarden@Kamarudin, Hamidah
(2022)
Process development and design of an integrated palm oil processing plant.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Latif, Abdul Hafiz
(2022)
Profiling of extension of time cases in Malaysian construction projects.
Masters thesis, Universiti Teknologi Malaysia.
Adole, Michael Adole
(2022)
Properties and performance of kenaf fiber-sawdust polymeric sandwich bio-composites.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Rasid, Nur Nadhira
(2022)
Properties of concrete with modified eggshell powder and ground palm oil fuel ash as partial cement replacement.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.
Salehudin, Mohd. Harfiz
(2022)
Properties of poly lactic acid/cellulose nanofibre/graphene oxide/thymol nanocomposite insecticide repellent film.
PhD thesis, Universiti Teknologi Malaysia.
Tan, Wee Vern
(2022)
Proposed framework for two tier management corporation for integrated strata development.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Chong, Hon Yuan
(2022)
The quality of walkability environment to support social capital.
Masters thesis, Universiti Teknologi Malaysia.
Hamzah, Hairul Mardiah
(2022)
Radiation grafted Bi-functional cation exchange membrane for vanadium redox flow battery.
Masters thesis, Universiti Teknologi Malaysia.
Hassan, Halmat Jalal
(2022)
Radiation safety assessment of Malaysian consumer products with possible radioactive elements.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Abo Zeed, Mohammad Ibrahiem
(2022)
Rain profile characterization and rain effect analysis of land mobile satellite based on measurement in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Zamri, Muhamad Najib
(2022)
Real time volumetric rendering optimization approach for cloudscapes in virtual environment.
PhD thesis, Universiti Teknologi Malaysia.
Koay, Kah Leong
(2022)
Real-time Facial Expression Recognition (FER) system for virtual meetings using joint learning method.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Masud, Muhammad Idrees
(2022)
Realization of analog signal processing modules using carbon nanotube field effect transistors.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Abdul Rashid, Muhammad Nur Imran
(2022)
Reducing the job stress of NLAX marketing consulting PLT employees during COVID-19.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Choo, Hau Sim
(2022)
Register-transfer-level Hardware Trojan classification boosted with gate-level features.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Osman, Eglal Mohammed Khalifa
(2022)
Regression testing framework for test cases generation and prioritization.
PhD thesis, Universiti Teknologi Malaysia.
Zhao, Yihao
(2022)
Relationship between green space and mental well being of Hebi’s community.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Tan, Ang See
(2022)
Relationship model between psychological factors and ecological footprint of research university students towards sustainable campus in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Salleh, Masrina Akmal
(2022)
Relationship-based software attributes prioritization model for digital library sustainable development targets.
PhD thesis, Universiti Teknologi Malaysia.
Hamzah, Muhammad Naziiruddin
(2022)
Reliability analysis of junctionless fin field effect transistor (JL-FinFET).
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hussein, Munirah
(2022)
Removal of arsenic from landfill leachate by natural soil adsorption for potential use as a permeable reactive barrier.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Osmani, Mohammad
(2022)
Repurchase intention model for mobile shopping application users in Malaysia.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Rahman, Shamsuri Jasri
(2022)
Retaining SAP (ERP system) knowledge among SAP expert in FGV Prodata Systems Sdn Bhd.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Chong, Alan Sze Hsyung
(2022)
Retention sum in construction contracts.
Masters thesis, Universiti Teknologi Malaysia.
Muhammad Arif, Muhammad Zikri
(2022)
Rethinking empowering development environment to improve youth empowerment and civic engagement.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ghazali, Mimi Diana
(2022)
Retrieving and modelling dielectric permittivity of diesel contamination in Terap Red and sandy soil using ground penetrating radar.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Muhammad Fakhree, Muhammad Akif
(2022)
Rheological properties of magnetorheological elastomer with fountain-like particle chain alignments.
Masters thesis, Universiti Teknologi Malaysia.
Anjum, Waqas
(2022)
Robust dynamic control strategy for standalone photovoltaic system under varying load and environmental conditions.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Tukiman, Norbaiti
(2022)
Robust PRIDIT scoring method for classification fraud cases in financial data.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Ali Aladeeb, Nahd Yahya
(2022)
The role of incentives on improving performance of human resources In Nesma Holding Company in Saudi Arabia.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Al-Sharea, Mohammed Hashim Abdulkareem
(2022)
The role of training in improving the performance of human resources in Al-Raya Drugstore.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Mohamed@Mohamad Lazim, Haznita
(2022)
Rural revitalization through e-commerce within community internet centre in Kampung Ubai, Kuantan.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Mohd. Sharoni, Syarawi Muhammad Husin
(2022)
Satellite altimeter wind speed estimation and tropical cyclone characterization using machine learning.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ting, Bing Bing
(2022)
Sawtooth roof system in improving daylighting performance in aerial sports hall.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Alamgir, Arbab
(2022)
Scalable diversified antirandom test pattern generation with improved fault coverage for black-box circuit testing.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohd. Azlan Jamal, Nur Aina
(2022)
Seabed sediment classification of side scan sonar data using histogram approach.
Masters thesis, Universiti Teknologi Malaysia.
Muhamad, Muhammad Abdul Hakim
(2022)
Seagrass mapping using habitat suitability modeling and multibeam echosounder around Redang archipelago.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Phuah, Chai Ling
(2022)
Secure deep learning inference with intel software guard extension on intel ice lake-SP xeon processor.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Bavan, Mahesan
(2022)
Seismic fragility of concrete building in Malaysia considering the effects of inadequate lap splice length.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.
Jaafar, Nor Azrini
(2022)
Selective joint motion recognition using multi sensor for salat learning.
PhD thesis, Universiti Teknologi Malaysia.
Garba, Salisu
(2022)
Self-adaptive mobile web service discovery framework for dynamic mobile environment.
PhD thesis, Universiti Teknologi Malaysia.
Looi, Chia Wei
(2022)
Sense of belonging in women’s space through spatial planning.
Masters thesis, Universiti Teknologi Malaysia.
Samsury, Ahnaf
(2022)
Sensory environments in nasi lemak living gallery & learning space, that enhance food learning.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Leong, Wan Yee
(2022)
Serial-integrated multi-criteria decision-making technique for resilient supplier selection in the manufacturing industry.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Abd. Rahim, Mohd. Rozaini
(2022)
Service-oriented architecture for internet-of-things based home area network.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Rashid, Norazlina @ Nora
(2022)
SESB'S 275 kV transmission line fault classification using wavelet-based neural networks.
Masters thesis, Universiti Teknologi Malaysia.
Saimon, Siti Mahfuza
(2022)
Silica rod based optical fibre sensor for high refractive index sensing application in ageing power transformer oil.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Yee, Choon Sean
(2022)
Simulation and analysis of voltage and electric field distribution along high voltage insulator.
Masters thesis, Universiti Teknologi Malaysia.
Ab. Manan, Oleen Nurvianti
(2022)
Simulation for small scale wind turbine system with ultra low power converter.
Masters thesis, Universiti Teknologi Malaysia.
Jomehzadeh, Fatemeh
(2022)
Simulation of classroom modeling on fourfaced windcatcher for optimum indoor natural ventilation rate.
PhD thesis, Universiti Teknologi Malaysia.
Lee, Zhi Shuang
(2022)
Simulation of flexible electronics inkjet printing capacitors characteristic.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ng, Yuh Chyn
(2022)
Simulation of in-memory logic circuit based on probabilistic memristor using LTSPICE.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Wan Ab. Karim, Wan Muhd. Hairi
(2022)
Single layer map viewer approach for multi-scale data extraction.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ahmed Ali Al-Fahham, Layth
(2022)
Single nucleotide polymorphisms of leptin and its receptor gene in type 2 diabetes patients among three major Malaysia ethnics.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Arif, M. Saad
(2022)
Single phase asymmetrical multilevel inverter topology with reduced device count.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ab. Rahman, Mazlinda
(2022)
Single step co-extruded triple layer micro-tubular solid oxide fuel cell.
PhD thesis, Universiti Teknologi Malaysia.
Afrizal, Afrizal
(2022)
Sistem pengurusan pengairan untuk kemampanan tanaman padi di Sumatera Barat.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Engku Majid, T. Mohd Maizatul Izwan
(2022)
Smart energy management system for common area in multi-tenant building.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Mohd Azlee, Amanie Husna
(2022)
Social media analysis on domestic travel behaviour during pandemic covid-19.
Masters thesis, Universiti Teknologi Malaysia.
Abdullah, Mohd. Shafiq
(2022)
Social media review on tourist perception and satisfaction at Tanjung Piai Johor National Park.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Hakimzai, Mubarak Shah
(2022)
Socio-economic impacts of development-induced displacement on informal households in Qalacha Khamdan, Kabul City, Afghanistan.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Muhd. Zaimi, Nurul Humaira
(2022)
Sodium dodecyl-benzene sulfonate added paraffin wax with graphene nanoplatelet for photovoltaic panel cooling application.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Raj Mohamed, Mohamed Azharuddin
(2022)
A solar energy based electric vehicle charging infrastructure for shopping centre.
Masters thesis, Universiti Teknologi Malaysia.
Ab. Hadi, Mariah Masykurah
(2022)
Spatial visibility analysis of stationary activities around digital urban screens in Johor Bahru.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Nasrul ‘Alam, Fakhrul Aniq Hakimi
(2022)
Spatio-temporal normalized joint coordinates as features for skeleton-based human action recognition.
Masters thesis, Universiti Teknologi Malaysia.
Mpungu, Kassimu
(2022)
Stability analysis of laminated beam systems with delay using lyapunov functional.
PhD thesis, Universiti Teknologi Malaysia.
Allah, AlImam Ahmed Raad Kher
(2022)
Stability improvement of dc bus in multiple input distributed power system using passive damping circuit.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Yunanda, Rochania Ayu
(2022)
Stakeholder influence, banking performance, country characteristics and the disclosure practices among Islamic banks.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Roslan, Nur 'Asikin
(2022)
Stakeholder participation and multi-criteria decision making approaches to urban water supply planning in Iskandar Malaysia.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Ghapar, Hafizza
(2022)
Statistical properties of lines distribution for tropical wood recognition system.
Masters thesis, Universiti Teknologi Malaysia.
Elniel Dalam, Fawzia Mansour
(2022)
Steady flow of some non-newtonian fluids through a porous medium by using adomian decomposition method.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Mohd. Nasir, Muhammad Adib
(2022)
Stochastic dynamic programming and machine learning under climate change for reservoir and irrigation operations.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Noh, Norshela
(2022)
Stochastic optimisation model of oil refinery industry and uncertainty quantification in scenario tree of pricing and demand.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Saleh, Norazila
(2022)
Strategi kawalan harta tanah tidak terjual di Negeri Melaka.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Omar, Suraya
(2022)
Strategi pemasaran dalam pengekalan kadar penghunian kompleks membeli belah semasa pandemik COVID-19.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdul Wahab, Norshakila
(2022)
Strength and compressibility characteristics of cement treated laterite soil under saturated and unsaturated conditions.
Masters thesis, Universiti Teknologi Malaysia.
Bulus, Ibrahim
(2022)
Structural and optical correlation of europium and dysprosium co-doped boro-telluro-dolomite glasses incorporated with silver nanoparticles.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Rayhan, Mohammad
(2022)
Structural characterization of a novel luciferase-like monooxygenase from bacteria Pseudomonas meliae.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.
Letchumanan, L. Thiruvarasu
(2022)
Structural model of enablers for Green Lean Six Sigma implementation in Malaysian manufacturing industries.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Azmi, Aizat
(2022)
Structure and dielectric properties of polypropylene containing multi-element oxide nanofillers.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Teoh, Joshua
(2022)
A study of telecommunication tower verticality eccentricity by using reflectorless total station and unmanned aerial vehicle.
Masters thesis, Universiti Teknologi Malaysia.
Chng, Sze Lyn
(2022)
Study of time-dependent dielectric breakdown (TDDB) in 15MM junctionless FinFET.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Pan, Pan
(2022)
Study on the conversion rate of ShenZhen Qulong Huafa Co., Ltd.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Nahid, Syed Farhan
(2022)
Suitability of fidic contract over the Public Procurement ACT (PPA) 2006 for local public projects in Bangladesh.
Masters thesis, Universiti Teknologi Malaysia.
Ahmad Asri, Muhammad Izzudin
(2022)
Surface acoustic wave gas sensor with nanostructured silicon sensing element.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Mohamud, Ismail Katun
(2022)
Surface modification of polyethylene glycol-nano silica using SDS to improve rheological and filtration properties of water-based mud.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Omar Elfarouk Elsherif, Omar Mohammed
(2022)
Sustainable closed-loop supply chain model with stochastic demand and return.
PhD thesis, Universiti Teknologi Malaysia.
Kamal, Nurulain Nadhirah
(2022)
Sustainable timber prefabricated architecture in Singapore.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Muhammad, Mohd. Khairul Idlan
(2022)
Symbolic regression model for reliable estimation and projections of evapotranspiration.
PhD thesis, Universiti Teknologi Malaysia.
Abdul Rahman, Anis Farhana
(2022)
Synthesis and characterization of metals doped on fibrous silica zeolites for benzene alkylation with methanol.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Khooy Yazdi, Mahsa Khosh
(2022)
Synthesis and characterization of poly(methyl methacrylate)/silver/porphyrin nanoparticles and its antibacterial studies on escherichia coli and staphylococcus a ureus.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Moosa, Salmah
(2022)
Synthesis of solid-supported silver nanocomposites for antimicrobial and dye adsorption applications.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Handy, Omar Abdullahi Wafudu
(2022)
Synthesis, characterization and catalytic activity of copper thiosemicarbazone complexes and their oxides in the reduction of nitroaromatic compounds.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Mohd. Hashim, Nur Ezzaty Nadia
(2022)
Tahap kepuasan hati pelanggan terhadap aspek keselamatan di pusat membeli belah angsana.
Masters thesis, Universiti Teknologi Malaysia.
Mohammed, Mohammed Sultan Ahmed
(2022)
Task migration optimization for improved dark silicon many-core systems performance under thermal constraint.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Wahdeen, Mohammed Mobark Salem
(2022)
Task oriented feature extraction for complex human activity recognition.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Mohd. Kassim, Nazirul Fariq
(2022)
Technical risk mitigation framework for railway construction project in Malaysia.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.
Yap, Yu Vun
(2022)
Techno-economic analysis of grid connected PV-battery system in Sarawak, Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Johari, Atikah
(2022)
Techno-economic resilient planning strategy in microgrid islanded system with multiple renewable energy and energy storage system in Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Yahya, Yazriwati
(2022)
Technological and social dimension on acceptance of social networking sites among students in higher learning institutions.
PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.
Oo, Kyaw Nyein
(2022)
Temperature effect on dynamic characteristics and power flow of thin structures.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Chow, Zhen Pei
(2022)
Temperature effect on the low-velocity impact characteristics of glass laminated aluminium reinforced epoxy panels.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Omar, Nurizan
(2022)
Ternary magnetic biochar composite from Citrullus Lanatus rind for supercapacitor’s electrode.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Harun, Muhammad Arif
(2022)
Thermal performances of hybrid nanofluids as coolant in computers using design of experiment method.
Masters thesis, Universiti Teknologi Malaysia.
Mamah, Stanley Chinedu
(2022)
Thin film nanocomposite membrane incorporated with palygorskite/chitin hybrid for forward osmosis desalination.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Ripin, Norzeti Hanani
(2022)
Thin film nanocomposite membrane incorporated with silver-carbon nanotube hybrid for desalination.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.
Razali, Ahmad Firdaus
(2022)
Three-dimensional (3D) reconstruction of a building from terrestrial laser scanning and photogrammetry dataset using Identical Point Picking (IPP) registration method.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Mat Adnan, Allysa
(2022)
Three-dimensional modelling of building based on the combination between unmanned aerial vehicle and laser scanning data.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Zulkifli, Nur Amalina
(2022)
Three-dimensional strata objects registration for land administration domain model.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Poobalan, Prashanth
(2022)
Tight binding model of ab stacked bilayer graphene.
Masters thesis, Universiti Teknologi Malaysia.
Jafry, Afiq Arif Aminuddin
(2022)
Titanium carbide and titanium aluminium carbide saturable absorbers fpr pulse generation in erbium-doped fiber lser.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.
Mohd. Ariffin, Saiful Norazwan
(2022)
To design an effective e-commerce marketing strategy to increase sales at Thelilycious Enterprise.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Joo, Michael Jiun Jia
(2022)
To identify the impacts of intelligent operations via digitalization to PAMB's insurance agents and their customers, taking the example of PGA life group.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Ramasamy, Rajasegaran
(2022)
To improve efficiency in project management at Apex Marine Engineering Sdn Bhd.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Alyami, Mohammad Hussen Nasser
(2022)
To improve the impact of leadership and management styles on the performance of Specialty Life Medicine Group.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Jamian, Siti Hajar
(2022)
To increase employee satisfaction and customer satisfaction towards service quality of Buildzone Engineering Trade and Supply.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Samsul Kamal, Muhammad Syahmi Shahiman
(2022)
To increase the sales of organic chicken product of Kee Song (M) Sdn Bhd by using strategic innovative marketing approach.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Yap, Yoon Heng
(2022)
Tomato ripeness detection using deep learning.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ag. Piut, Dg. Aidah
(2022)
Towards digitalization: grant management system adoption.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Jamil, Nur Alisya
(2022)
Transforming and sustaining SMEs Amid MCO through social media marketing: a study on Farhan Bina Teguh Enterprise.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Khairul Yusri, Ahmat Rajab
(2022)
Transient removal of contaminant from a channel with differentially heated wall of cavity.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.
Saleh, Mustafa Hazim
(2022)
Transmitarray antenna unit cell characteristics for 5G applications.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Hassan, Ahmed Ghazi
(2022)
Tribology and corrosion characteristics of carbon nanotube and polyetheretherketone/ carbon nanotube-coated porous titanium-tantalum shape memory alloys for biomedical applications.
PhD thesis, Universiti Teknologi Malaysia.
Hashim, Mohammed Mahdi
(2022)
Triple scheme based on image steganography to improve imperceptibility and security.
PhD thesis, Universiti Teknologi Malaysia.
Anwar, Raja Waseem
(2022)
Trust-based energy efficient routing protocol for wireless sensor networks.
PhD thesis, Universiti Teknologi Malaysia.
Nordin, Eddie Zawira
(2022)
Urban forestry as a sustainable design approach in a forest hill development.
Masters thesis, Universiti Teknologi Malaysia.
Lim, Kok Cheng
(2022)
Usability framework for mobile augmented reality language learning.
PhD thesis, Universiti Teknologi Malaysia.
Chan, Shu Han
(2022)
User’s experienscape of a lifestyle curation bookstore.
Masters thesis, Universiti Teknologi Malaysia.
Shakir, Wisam Sabah
(2022)
Using GA to improve coordination of overcurrent relays for distribution network with high DG penetration.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Ahmad, Mohd. Radziff
(2022)
Utilizing productivity among procurement officers after the completion of the tender process at procurement division, Ministry of Education.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Huang, Xi
(2022)
Vaccine media development after epidemic.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Sulaiman, Nursyuhada
(2022)
Validation of online equine-assisted therapy to reduce depression, anxiety, and stress symptoms.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Biomedical Engineering & Health Sciences.
Ismail, Nazaitul Hazira
(2022)
Variation and its valuation in design-build contract with regard to the public sector of Malaysia.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Wong, Ngei Siong
(2022)
Vehicles detection using deep learning with improved single shot detector.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Yosri, Muhammad Hafizan
(2022)
Ventilation system for reduction of particle concentration in automotive painting line environment.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Tan, Zhe Jie
(2022)
Verilog modelling of Modbus TCP at 100 mbps.
Masters thesis, Universiti Teknologi Malaysia.
Zulkifli, NurAdilla
(2022)
Vertical land motion estimation derived from space-based geodetic techniques.
PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Othman, Asmak
(2022)
Vertical neighborhood the empowerment of greenery towards healthy living for M40 group of Johorean.
Masters thesis, Universiti Teknologi Malaysia.
Chew, Daniel Vee Kang
(2022)
The virtual museum and digital heritage preservation in Kampong Bharu.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Abdul Razak, Siti Hajar
(2022)
Visitor’s satisfaction and improvement on business activities in commercial street of BP-Walk Bandar Penggaram, Johor.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Ismail, Nasarudin
(2022)
Void avoidance opportunistic routing density rank based for underwater sensor networks.
PhD thesis, Universiti Teknologi Malaysia.
Mohd. Sukarnoor, Noor Idora
(2022)
Vortex-induced vibration characteristics of two tandem spring supported cylinders with helical strakes.
PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.
Astuti, Ariani Dwi
(2022)
Water quality modeling using artificial neural networks incorporating land use and sewage treatment plant factors.
PhD thesis, Universiti Teknologi Malaysia.
Khatibsyarbini, Muhammad
(2022)
Weighted string distance approach based on modified clustering technique for optimizing test case prioritization.
PhD thesis, Universiti Teknologi Malaysia.
Mohamed Nafis, Nur Biha
(2022)
Wideband mosaic frequency selective surface for dichroic surface, absorber and directive antenna applications.
PhD thesis, Universiti Teknologi Malaysia.
Shaharuddin, Nur Haziqah
(2022)
Wind noise simulation of the a-pillar and side view mirror using generic vehicle model, DrivAer.
Masters thesis, Universiti Teknologi Malaysia.
Cheong, Zheng Quan
(2022)
Wirelength estimation in VLSI cell placement using machine learning techniques.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Electrical Engineering.
Dalim, Dhiyah Diyanah
(2022)
Women-friendly housing: rethinking women's safety, welfare and security in medium-cost housing.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.
Said, Tawfiq Allam
(2022)
Work process efficiency at Ashafiah Agro Farm Enterprise.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Kuan, Shirley Chien Hui
(2022)
Workplace meeting optimisation: an action research on factors driving meeting effectiveness.
Masters thesis, Universiti Teknologi Malaysia, Azman Hashim International Business School.
Eow, Wei Siang
(2022)
X band electron paramagnetic resonance spectrometer based on field programmable gate array.
Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.
This list was generated on Tue Oct 15 01:49:45 2024 +08.