Browse by Type

Ghazalli, N. F. and Yuliati, Leny and Endud, Salasiah and Shamsuddin, Mustaffa and Lintang, Hendrik Oktendy (2013) Vapochromic copper(I) pyrazolate complex materials for phosphorescent chemosensors of ethanol. In: 1st International Conference on Science and Engineering of Materials, ICoSEM 2013, 13-14 Sep, 2013, Kuala Lumpur, Malaysia.

Mohamad, Ahmad Qushairi and Khan, Ilyas and Ismail, Zulkhibri and Shafie, Sharidan (2013) The unsteady free convection flow of second grade fluid in rotating frame with ramped wall temperature. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM 21, 6-8 Nov, 2013, Penang, Malaysia.

Mohamad, Ahmad Qushairi and Khan, Ilyas and Ismail, Zulkhibri and Shafie, Sharidan (2013) The unsteady free convection flow of second grade fluid in rotating frame with ramped wall temperature. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM 21, 6-8 Nov, 2013, Penang, Malaysia.

Kamarudin, Muhammad Ramlee and Jais, M. I. and Jamlos, M. F. and Jusoh, M. and Sabapathy, T. (2013) 2.45 GHz beam-steering textile antenna for WBAN application. In: 2013 IEEE International Symposium on antennas and Propagation and USNC-URSI National Radio Science meeting July 7-13, 2013 Orlando, Florida, USA , 7-13 July 2013, Florida, USA.

Mohd. Faudzi, Ahmad Athif (2013) 3-D finite-element analysis of fiber-reinforced soft bending actuator for finger flexion. In: 2013 IEEE/ASME International Conference On Advanced Intelligent Mechatronics: Mechatronics For Human Wellbeing, AIM 2013.

Atila, U. and Karas, Ismail Rakip and Abdul Rahman, Alias (2013) A 3D-GIS implementation for realizing 3D network analysis and routing simulation for evacuation purpose. In: Lecture Notes In Geoinformation And Cartography.

Khamis, Nor Hisham and Kamarudin, M.R. and Samsur, N.A. and Ahyat, E.N. and Khamis, N.H.H. (2013) A 4.8GHz implantable small printed antenna for wireless implantable body area network applications. In: 2013 IEEE International RF and Microwave Conference, 9-11 Dec 2013, Penang, Malaysia.

Wong, Annie Ping Eng and Lee, Janice Yim Mei and Muthuveerappan, Chitrakala (2013) Abnormal market return from real estate divestiture and acquisition announcements in a developing country. In: 20th IBIMA Conference, 2013.

Md. Ariff, Mohd. Shoki and Yeow, S. M. and Zakuan, Norhayati and Bahari, Ahamad Zaidi (2013) Acceptance of internet banking systems among young managers. In: 2013 International Conference On Manufacturing, Optimization, Industrial And Material Engineering (MOIME 2013).

Abdul Hamid, Nurul Farhana and Ahmad, Anuar and Samad, Abd. Manan and Ma'Arof, Ismail and Hashim, Khairil Afendy (2013) Accuracy assessment of calibrating high resolution digital camera. In: 2013 IEEE 9Th International Colloquium On Signal Processing And Its Applications, Cspa 2013, 8-10 March 2013, Kuala Lumpur, Malaysia.

Ahmad, Anuar (2013) Accuracy assessment of small format aerial photograph based on variation photographic. In: 12th International Symposium on Geoinformation & Exhibition , 2013.

Ahmad, Baharin (2013) Accuracy assessment of topographic mapping using UAV image integrated with aerial photograph and satellite images. In: The 8th International Conference on digital Earth 2013, 2013.

Salim, Kamilah Radin and Haron, Habibah Norehan and Hussain, Noor Hamizah and Ali, Rosmah (2013) The achievement of laboratory work learning outcomes: students perceptions. In: Research In Engineering Education Symposium – Kuala Lumpur, 4 July through 6 July, 2013, Putrajaya, Malaysia.

Norafifah, H. and Noordin, M. Y. and Izman, S. and Kurniawan, D. (2013) Acid pretreatment of wc-co for surface roughening and cobalt removal prior to CVD diamond coating. In: Applied Mechanics And Materials.

Tahmasebi, M. and Abdul Rahman, Roslan and Mailah, M. and Gohari, M. (2013) Active force control applied to spray boom structure. In: Applied Mechanics And Materials.

R., Rosli and M., Mailah (2013) Active force control with iterative learning control algorithm applied to vehicle suspension system. In: 13th International Conference on Robotics, Control and Manufacturing Technology (ROCOM '13) April 2-4, 2013,Kuala Lumpur, 2013.

Abdul Halim Yun, Hafizah and Mat, Ramli and Tuan Abdullah, Tuan Amran and Mohamed, Mahadhir and Johari, Anwar and Ali, Asmadi (2013) Activity of copper and nickel loaded on HZSM-5 zeolite based catalyst for steam reforming of glycerol to hydrogen. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013) , 2013.

Mahmood, A. and Othman, M. F. and Yusof, Y. M. (2013) Activity theory model to cultivate higher order mathematical thinking. In: Research In Engineering Education Symposium (REES2013), 4 - 6 July 2013, Putrajaya, Malaysia.

Mamat, M. A. and Wan Abdullah, W. S. (2013) Adab-adab guru menurut Imam Abu Hanifah (M.767m.): kajian terhadap Wasiyyah Abi Hanifah Li Abi Yusuf. In: Seminar Pertama Pendidikan Dan Penyelidikan Islam (SEPPIM'13), 17–18 September 2013, UTM Skudai, Johor Bahru, Johor.

Azriyenni, Azriyenni and MustafA, Mohd. Wazir and Sukma, Dian Yayan and Desmelati, Desmelati (2013) Adaptive backpropagation neural network in system protection scheme. In: 2nd ASEAN Academic Society International Conference (AASIC), 2013, Thailand.

Saeed, Faisal and Salim, Naomie and Abdo, Ammar and Hentabli, Hamza (2013) Adaptive cumulative voting-based aggregation algorithm for combining multiple clusterings of chemical structures. In: Asian Conference on Intelligent Information and Database Systems 2013, 18-20 March 2013, Kuala Lumpur, Malaysia.

Choi, Sang Long and Akintunde Ajagbe, Musibau and Tan, Owee Kowang (2013) Addressing the issues on employees turnover intention in the perspective of HRM practices in SME. In: International Conference on Innovation, Management and Technology Research 2013, 22 – 23 September, 2013, Malaysia.

Nazim, E. M. and Izman, S. and Ourdjini, A. and Abubakar, T. and Mas Ayu, H. (2013) Adhesion strength of HFCVD diamond coating on WC substrate seeded with diamond and different ratios of SiC powders. In: MIMEC 2013 : 1st International Materials, Industrial, and Manufacturing Engineering Conference, 4-6 Dec 2013, Johor Bahru, Johor.

Abd Rahman , Norhan (2013) Adopting mitigation measure for ecology and ecosystem of highway. In: International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), 2013.

Chakraborty, Ananya Raka and Abu Mansor, Nur Naha (2013) Adoption of human resource information system: a theoretical analysis. In: Second International Conference On Leadership, Technology And Innovation Management (2012).

Yusuf, G. A. and Mohamed, S. F. and Yusof, Z. M. and Misnan, M. S. (2013) Adoption of standard based pricing method for the procurement of mechanical and electrical engineering services in Malaysia. In: Lecture Notes In Engineering And Computer Science.

Abd. Jalil, Aishah (2013) Adsorption behavior of carbon nanotubes modified mesostructured silica nanoparticles for the removal of methylene blue. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), Desaru, Johor Bahru, 9-10th December 2013, 2013.

Ismail, Nordinah and Abd. Ghani, Rasli (2013) Advance devices using piezoelectric harvesting energy. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16 -17 December 2013, Putrajaya, Malaysia, 2013.

Ismail, Noorradiyah and Abd. Ghani, Rasli (2013) Advance in renewable energy using piezoelectric power-harvesting devices. In: Applied Mechanics And Materials, 26-28 October 2012, Hebei, China.

Mohd. Yusof, Sha'ri (2013) An AHP based-model for sustainable manufacturing performance evaluation in automotive industry. In: Proceedings of the 12th International Symposium on the analytic Hierarchy Process 2013, 2013, Kuala Lumpur, Malaysia.

A. Shukor, Khairunnisa and Jasmi, Kamarul Azmi and Mohd. Noor, Ahmad Firdaus (2013) Akhlaq self-regulation and students' performance in the Islamic education course among premier polytechnic students in Malaysia. In: Prosiding Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13] (Proceedings of the First Seminar on Islamic Education and Research [SePPIM'13]), 17-18 September 2013, Main Hall of Faculty of Islamic Civilization, Universiti Teknologi Malaysia.

Suherman, A. and Abdul Rahman, Muhammad Zulkarnain and Busu, Ibrahim (2013) Albedo and land surface temperature shift in hydrocarbon seepage potential area, case study in Miri Sarawak Malaysia. In: 8th International Symposium on digital Earth 2013, Kuching, Sarawak 26-29 August, 2013, 2013.

Pour, A. B. and Hashim, Mazlan (2013) Alteration mineral mapping using Etm+ and hyperion remote sensing data at Bau Gold Field, Sarawak, Malaysia. In: 8th International Symposium on Digital, 2013.

Mohd. Rameli, Mohd. Rustam and Said, Hamdan and Mislan, Nora and Tajuddin, Norashuha and Van, Nguyen Thuy and Rosdi, Ros Ilyani and Chai, Tee Tiam (2013) Alternative in overcoming anxiety in mathematics learning. In: 2nd International Seminar on Quality and Affordable Education (ISQAE 2013), 2013.

Zainal, Norashilah and Ibrahim, Nor Hasniza and Surif, Johari and Mohktar, Lilia Ellany and Abd. Rahman, Nor Farahwahidah (2013) Amalan Pengetahuan Pedagogi Kandungan (PPK) dalam kalangan pensyarah kimia Universiti Teknologi Malaysia. In: 2nd International Seminar on Quality & Affordable Education 2013, 7-10 October, KSL Hotel & Resort, Johor Bahru, Johor, 2013.

Hashim, Zulkefli and Phang, Fatin Aliah (2013) Amalan pengetahuan teknologi pedagogi kandungan guru fizik tingkatan enam. In: 2nd International Seminar on Quality and Affordable Education 2013, 2013.

Abdul Latib, Azlan (2013) Amalan service learning di UTM : isu dan cabaran. In: The National Conference on Higher Education Institutions and Community Engagement 2013 ), held in Universiti Malaysia Kelantan, Jeli Campus, Malaysia, 26th-27th August 2013, 2013.

Mohamad, M. I. and Nekooie, M. A. and Ismail, Z. B. and Taherkhani, R. (2013) Amphibious urbanization as a sustainable flood mitigation strategy in South-East Asia. In: Advanced Materials Research.

Isamail, Mohamad Zaim and Borhan, Joni Tamkin and Abu @ Hussin, Mohd. Fauzi (2013) Analisis kritikal terhadap pembiayaan semula perumahan secara Islam melalui kontrak Musharakah Mutanaqisah. In: Prosiding PERKEM VIII (2013), 2013.

Ali, Anati (2013) Analisis masa pemisahan bagi aliran olakan campuran MHD tak tetap merentasi sfera. In: Simposium Kebangsaan Sains Matematik ke 21, 2013.

Mohtasebi, Amirhossein and Ismail, Zuraini and Shanmugam, Bharanidharan (2013) Analysis of applying enterprise service bus architecture as a cloud interoperability and resource sharing platform. In: 7th International Conference On Knowledge Management In Organizations: Service And Cloud Computing.

Mohd. Sani, Atikah and Sarmin, Nor Haniza and Adam, Nooraishikin and Amzee Zamri, Siti Norziahidayu (2013) The analysis of crystallographic symmetry types in finite groups. In: 3rd International Conference on Mathematical Sciences, ICMS 2013, 17-19 Dec, 2015, Kuala Lumpur, Malaysia.

Umar, Z. and Wan Mohd. Akib, W. A. A. and Ahmad, Anuar (2013) Analysis of debris flow of Kuranji River in Padang City using rainfall data, remote sensing and geographical information system. In: 8th International Symposium on digital Earth .

Jamil, Haitham A. and Zarei, Roozbeh and Fadlelssied, Nadir O. and Aliyu, M. and Nor, Sulaiman M. and Marsono, Muhammad N. (2013) Analysis of features selection for p2p traffic detection using support vector machine. In: International Conference of Information and Communication Technology (ICoICT), MAR 20-22, 2013, Bandung, Indonesia.

Hermawan, D. and Md. Ali, N. A. and Wan Ibrahim, Wan Azli and Sanagi, M. M. (2013) Analysis of fluconazole in human urine sample by high performance liquid chromatography method. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013).

Yusof, Yuhani and Sarmin, Nor Haniza and Wan, Heng Fong and Goode, T. Elizabeth and Ahmad, Muhammad Azrin (2013) An analysis of four variants of splicing system. In: Simposium Kebangsaan Sains Matematik Ke-20 (SKSM20), 2013, Johor Bahru, Malaysia.

Yusof, Y. and Sarmin, N. H. and Fong, W. H. and Goode, T. E. and Ahmad, M. A. (2013) An analysis of four variants of splicing system. In: AIP Conference Proceedings.

Rahman, H. A. and How, G. C. and Fai, Y. C. and Ming, E. S. L. (2013) Analysis of human hand kinematics: reaching upward movement. In: Applied Mechanics And Materials.

Johari, Anwar and Ahmad, Arshad (2013) Analysis of the pyrolytic fuel properties of empty fruit bunch briquettes. In: Conference, 2013.

Gaya, M. S. and Wahab, N. A. and Sam, Y. M. and Samsuddin, S. I. (2013) Anfis inverse control of dissolved oxygen in an activated sludge process. In: 2013 IEEE 9th International Colloquium On Signal Processing And Its Applications (CSPA).

Ling, T. G. and Rahmat, M. F. and Husain, A. R. (2013) Anfis modeling and direct anfis inverse control of an electro-hydraulic actuator system. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Gaya, Muhammad Sani and Abdul Wahab, Norhaliza and Md. Sam, Yahaya and Nor Anuar, Aznah and Samsuddin, Sharatul Izah (2013) ANFIS modelling of carbon removal in domestic wastewater treatment plant. In: The 2nd International Conference on Advance Materials Design and Mechanics (ICAMDM2013), 2013.

Gaya, M. S. and Wahab, N. A. and Sam, Y. M. and Anuar, A. N. and Samsuddin, S. I. (2013) Anfis modelling of carbon removal in domestic wastewater treatment plant. In: Applied Mechanics And Materials.

Azaman, Aizreena and Yamamoto, Shin-Ichiroh (2013) Ankle joint stiffness and damping pattern under different frequency of translation perturbation. In: Applied Mechanics And Materials.

Mohd. Jani, Nurul Hafiza and Mohd. Radzi, Nor Haizan and Ngadiman, Mohd. Salihin (2013) Ant colony optimization for solving university facility layout problem. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Dzahir, M. A. M. and Nobutomo, T. and Yamamoto, S. I. (2013) Antagonistic mono- and bi-articular pneumatic muscle actuator control for gait training system using contraction model. In: ISSNIP Biosignals and Biorobotics Conference, BRC.

Malek, N. A. N. N. and Ishak, S. A. and Kadir, M. R. A. (2013) Antibacterial activity of copper and CTAB modified clays against pseudomonas aeruginosa. In: Advanced Materials Research.

Ariff, M. H. M. and Zamzuri, H. and Ldris, N. K. N. and Mazlan, S. A. (2013) Antilock braking system slip control modeling revisited. In: Applied Mechanics And Materials.

Lee, Jun Hung and Abdullah, Fatin Aliah Phang and Bunyamin, Muhammad Abd. Hadi (2013) Aplikasi konsep fizik dalam menyelesaikan masalah yang berasaskan STEM bagi pelajar Tingkatan Enam Atas. In: 2nd International Seminar on Quality and Affordable Education 2013.

Samsudin, S. I. and Rahmat, M. F. and Wahab, N. A. and Gaya, M. S. and Razali, M. C. (2013) Application of adaptive decentralized PI controller for activated sludge process. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Rad, M.S. and Ahmad, Z. and Prawoto, Y. (2013) Application of auxetic foam in energy absorbing system of automotive bumper. In: 7th International Conference on Advanced Computational Engineering and Experimenting (ACE-X2013).

Ahamad, Rahmalan (2013) Application of biz(benzylidene) ethylenediamine for the enhancement of Copper(II) detection using DPASV. In: 26th Regional Symposium of Malaysia analytical Sciences (SKAM 26) .

Chung, Leng Pau and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Hamid, Malsiah (2013) Application of Cfd in prediction of indoor building thermal performance as an effective pre-design tool towards sustainability. In: International Conference on “Innovation Challenges In Multidisciplinary Research & Practice” 2013.

Al Hamrouni, Ibrahim and Khairuddin, Azhar and Salem, M. (2013) Application of differential evolution algorithm in transmission expansion planning. In: 2013 International Conference on Mechatronics, Applied Mechanics and Energy Engineering, MAMEE 2013, 27th-29th July 2013, Singapore.

Roslan, N. A. and Buntat, Z. and Sidik, M. A. B. (2013) Application of dimensional analysis for prediction of nox removal. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Sa'adan, A. W. M. and Aziz, M. and Sundari, R. (2013) Application of frumkin isotherm for carbon steel corrosion in soil media. In: Advances In Materials And Materials Processing, PTS 1-3.

Khairi, M. T. M. and Ibrahim, S. and Md. Yunus, M. A. and Sulaiman, M. N. M. (2013) An application of independent component analysis method for estimating the quality level of water using optical tomography. In: Proceedings - 2013 IEEE 4th Control and System Graduate Research Colloquium, ICSGRC 2013.

Ng, B. C. and Darus, I. Z. M. and Kamar, H. M. and Norazlan, M. (2013) Application of multilayer perceptron and radial basis function neural network in steady state modeling of automotive air conditioning system. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Reni, Suryanita and Adnan, Azlan (2013) Application of neural networks in bridge health prediction based on acceleration and displacement data domain. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2013 Vol I, IMECS 2013, 13th - 15th March 2013, Hong Kong.

Sunar, N. H. and Rahmat, M. F. and Ismail, Z. H. and Faudzi, A. M. and Salim, S. N. S. and Samsudin, S. I. (2013) Application of optimization technique for PID controller tuning in position tracking of pneumatic actuator system. In: 2013 IEEE 9th International Colloquium On Signal Processing And Its Applications (CSPA).

Abdul Rahim , Ruzairi (2013) The application of optocoupler IC for secure control and noise reduction in magnetic induction tomography receiver circuit. In: ICP 2013, 2013.

Abdul Hamid, Mohd. Foad (2013) Application of probability and statistics in constructing likelihood of failure bands for RBI approach in structural integrity management. In: Conference, 2013.

Ahmad, Baharin (2013) Application of quickbird and Unmanned Aerial Vehicle (UAV) for updating topographic map: a review. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013).

Abdul Manaf , Nur'azah (2013) Application of reproducing kernel to analyze the survival data of HIV positive patients. In: The Fourth International Conference On Science And Engineering (2013), 2013.

Ahmad, Arshad (2013) Application of risk assessment approach on a hydrogen refuelling station. In: 5th. international Conference of Hydrogen Safety (ICHS2013), 2013.

Abdelrhman, A. M. and Leong, M. S. and Hee, L. M. and Ngui, W. K. (2013) Application of wavelet analysis in blade faults diagnosis for multi-stages rotor system. In: Applied Mechanics And Materials.

Shika, S. A. and Sapri, M. and Sipan, I. and Abubakar, A. I. and Umar, A. and Wakawa, U. B. (2013) Approach to calibrated simulation tool for improved building performance. In: Advanced Materials Research.

Abdullah, Nasuha Lee and Jamaludin, Khairur Rijal and Abdul Talib, Hayati @ Habibah (2013) Assessing impact of operational complexity on quality management practices in malaysia's electrical and electronics manufacturing industry. In: 4th International Graduate Conference on Engineering,Science and Humanity 2013.

Abba, A. H. and Noor, Z. Z. and Aliyu, A. and Medugu, N. I. (2013) Assessing sustainable municipal solid waste management factors for Johor-Bahru by analytical hierarchy process. In: Advanced Materials Research.

Foo, Y. S. and Hashim, Mazlan (2013) Assessing the impact of landscape development on ecosystem services value in tropical watershed. In: 8th International Symposium on Digital, 2013.

Ali, M. I. and Hashim, Mazlan and Zin, H. S. M. (2013) Assessing water availability over peninsular Malaysia using public domain satellite data products. In: 8th International Symposium of Digital Earth, 2013.

Abdul Ghafar, Mohamed Najib (2013) Assessment in language teaching. In: International Seminar on Integrating Curriculum, Teaching, and Assessmentin Language Learning, 2013.

Yazdani, Z. and Talkhestan, G. A. and Kamsah, M. Z. (2013) Assessment of carbon footprint at University Technology Malaysia (UTM). In: Progress In Environmental Protection And Processing Of Resource, PTS 1-4.

Meng, Soon Chiong and Rajoo, Srithar and Costall, Aaron W. and Wan Salim, Wan Saiful-Islam and Romagnoli, Alessandro and Martinez-Botas, Ricardo F. (2013) Assessment of cycle averaged turbocharger maps through one dimensional and mean-line coupled codes. In: ASME Turbo Expo 2013: Turbine Technical Conference and Exposition, June 3–7, 2013, San Antonio, Texas, USA.

Abdul Ghafar, Mohamed Najib (2013) Assessment of higher education learning in the 21st century. In: 4th International Graduate Conference on Engineering, Science and Humanities (IGCESH 2013), 2013.

Hashim, Khairil Afendy and Darwin, Nor Hadija and Ahmad, Anuar and Samad, Abd. Manan (2013) Assessment of low altitude aerial data for large scale urban environmental mapping. In: 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, CSPA 2013, 8-10 March 2013, Kuala Lumpur, Malaysia.

Anjomshoae, A. and Abdul Rani, M. R. B. (2013) Assessment of musculoskeletal discomfort and psychosocial work factors among Malaysian bus drivers. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Udin, Wani Sofia and Ahmad, Anuar (2013) Assessment of photogrammetric mapping accuracy based on variation flying altitude using unmanned aerial vehicle. In: 8th International Symposium on digital Earth .

Saad, Rosli and Mohamad, Edy Tonnizam and M. M., Nordiana and I. N., Azwin and Mohd. Akip Tan, Norsalkini (2013) Assessment of quarry volume using 2-D resistivity imaging method. In: AIP Conference Proceedings.

Abdul Rani, Mat Rebi (2013) Association between workers perception and their level of satisfaction with their working environment. In: UNSPECIFIED, 2013.

Khairuddin, A. and Bakar, N. A. (2013) ATC determination incorporating wind generation. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013, Langkawi, Malaysia, 3rd -4th June 2013.

Aldaw Idrees, F. and Sakrani, S. and Othaman, Z. (2013) The atomic force microscope study of self-assembled silicon nanodots growth using magnetron sputtering system. In: Advanced Materials Research.

Sagadavan, R. and Djauhari, M. A. (2013) Autocorrelated multivariate process control: a geometric brownian motion approach. In: AIP Conference Proceedings.

Fong, Wan Heng and Gan, Yeesiang and Sarmin, Nor Haniza and Turaev, Sherzod (2013) Automata representation for abelian groups. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B, 18 December 2012 through 20 December 2012, Putrajaya; Malaysia.

Jibril, J. D. and Sipan, I. and Zulkepli, M. B. and Aminu Dodo, Y. and Ali Jogana, M. (2013) Awareness of 3R's critical success factor for greener higher educational institutions. In: Advanced Materials Research.

Ghazali, Masitah and Pulanisamy, Sangeetha (2013) B - DiNAMA: liberating the visually impaired users. In: International Conference on Interactive digital Media 2013.

Abdul Rani, Mat Rebi (2013) Backpain prevalence and backpack culture among Malaysian schoolchildren. In: Human Factor Ergonomic Society of Malaysia, 2013 Conference.

Md. Rozali, S. and Rahmat, M. F. and Husain, A. R. (2013) Backstepping design for position tracking control of nonlinear system. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Kamarudin, Muhammad Ramlee and Jusoh, M. and Jamlos, M. F. and Sabapathy, T. and Jais , M.I (2013) A beam steering compact patch antenna with high gain application. In: 2013 IEEE International Symposium on antennas and Propagation and USNC-URSI National Science Radio July 7-13, 2013 Orlando, Florida, USA , 7-13 July 2013, Florida, USA.

Jusoh, M. and Jamlos, M. F. and Kamarudin, M. R. and Salimi, M. N. and Malek, F. and Jais, M. I. (2013) A beam steering patch array antenna for wimax application. In: 2013 7Th European Conference On Antennas And Propagation, Eucap 2013.

A. Rashid , Ahmad Safuan (2013) Bearing capacity of soil reinforced with soil-cement columns formed by the deep mixing method. In: Third International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, Nov. 13-15, 2013, ISBN: 978-4-9905958-2-1 C3051.

Lee, Hoong Pin and Awang, Abdullah Zawawi and Omar, Wahid (2013) Behaviour of Steel Strapping Tensioning Technique (SSTT) confined high-strength concrete with different lateral pre-tensioning stresses. In: The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013) , 16th - 17th April 2013, UTM Skudai, Johor, Johor Bahru.

Hamdan, Nazirah and Jasmi, Kamarul Azmi (2013) Bentuk Metodologi Pengajaran Rasulullah SAW Dari Perspektif Pemikiran Imam al-Nawawi Menerusi Kitab Himpunan Hadis Empat Puluh (Teaching Methodology of the Prophet from the Perspective of Imam al-Nawawi Thinking Through the collection of Forty Hadith Book). In: Prosiding Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13] (Proceedings of the First Seminar on Islamic Education and Research [SePPIM'13]), 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Mazlan, Nur Shima Fadhilah and Ahmad Khairudin, Nurul Bahiyah (2013) Binding mode study of ß-glucosidase B from P. polymyxca with cellobiose and laminaribiose. In: International Conference of Computational Chemistry and Biology (ICCCB 2013), 2013.

Ani , Farid Nasir (2013) Bioethanol Production From Sago Pith Residue (SPR) using microwave enhanced hydrothermal hydrolysis accelerated by carbon dioxide. In: International Conference of Chemical Engineering and Industrial Biotechnology.

Hosseini, S. E. and Wahid, M. A. and Abuelnuor, A. A. A. (2013) Biogas flameless combustion: a review. In: Applied Mechanics And Materials.

Othman, N. Z. and Wei, Chang, H. and Then, C. and Abd. Malek, R. and Sarmidi, Mohamad Roji and Aziz, Ramlan and Wan Mustapha, W. A. and Ali El-Enshasy, Hesham Ali Metwally Ali El-Enshasy (2013) Bioprocess development for high cell density cultivation of Rhizobium trifolii in semi-industrial scale stirred tank bioreactor. In: 2013 AIChE Annual Meeting, 3-8 Nov, 2013, San Francisco, CA.

Ho, Chin Siong and Matsuoka, Y. and Chau, L. W. and Teh, B. T. and Simson, J. J. and Gomi, K. (2013) Blueprint for low carbon scenarios for asian region- the case of Iskandar Malaysia. In: 4th International Conference on energy and Environment (ICEE 2013) on 5-6 March 2013 at UNITEN Putrajaya campus.

Ho, C. S. and Matsuoka, Y. and Chau, L. W. and Teh, B. T. and Simson, J. J. and Gomi, K. (2013) Blueprint for the development of low carbon society scenarios for asian regions- case study of Iskandar Malaysia. In: IOP Conference Series: Earth and Environmental Science.

Mun, H. K. and You, K. Y. and Dimon, M. N. (2013) Broken rice detection based on transmission power measurement using a microstrip wide-ring sensor. In: Manufacturing Process And Equipment, PTS 1-4.

Abdullah , Abdul Halim (2013) Budayakan kemahiran berfikir aras tinggi. In: Berita Harian.

Ali, Mohd. Fadzli and Joyes, Gordon and Ellison, Linda (2013) Building effective small-group team working skill through blended learning at Malaysia tertiary institution. In: International Conference on Education & Educational Psychology 2013 (ICEEPSY 2013), 2013.

Jamaludin, Mohamed Sabir and Ab. Rahim, Nik Mohd. Zaim and Ghazali, Mohd. Al’ikhsan and Abdul Shukor, Azizi Shukri (2013) Cabaran ulama kontemporari menangani beberapa isu dalam pluralisme agama di Malaysia. In: NADWAH ULAMA NUSANTARA (NUN) V: “Ulama dan Cabaran Idealisme Semasa”, 9-10 September 2013, UKM Bangi, Selangor, Malaysia.

Abdul Hamid, Nurul Farhah and Ahmad, Anuar (2013) Calibration of high resolution digital camera based on different photogrammetric methods. In: 8th International Symposium on digital Earth .

Nordin, J. A. and Nasution, A. K. and Hermawan, H. (2013) Can the current stent manufacturing process be used for making metallic biodegradable stents. In: Advanced Materials Research.

M Hasnan, Siti Norhaizum and Ayu, Media A. and Mantoro, Teddy and Mazlan, M. Hasbullah and Abobakr, M. and Balfaqih, A. and Haseeb, Shariq (2013) Capwap protocol and context transfer to support seamless handover. In: 9th International Conference on Computing and Information Technology, IC2IT 2013;, 9 May 2013 through 10 May 2013, Bangkok; Thailand.

Syed Mansor, Syed Mohamed Shafeq (2013) Career Selection: a Review. In: WCES 2013-5th World Conference on Educational Science.

Nazir, Ramli and Syam, Affiz and Razak, A. and Mansor, M. (2013) A case history of ground improvement work for Kuala Lumpur International Airport 2. In: Foundation and Soft Ground Engineering Conference, Thu Dau Mot University ICTDMU-1, Binh Duong, , 5-6 June 2013, Binh Duong, Vietnam.

Muslimen, R. and Mohd. Yusof, S. and Abidin, A. S. Z. (2013) A case study of lean manufacturing implementation approach in Malaysian automotive components manufacturer. In: Lecture Notes In Electrical Engineering.

Abdul Awal, Ziad and Ammoo, Mohd. Shariff (2013) A case study on the air flow characteristics of the hirobo-FALCON 505 controllable helicopter's main rotor blade. In: International Conference on Mechatronics and Computational Mechanics (ICMCM 2013) , 2013.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Catalytic combustion of waste palm trunk derived biochar and biomass. In: Applied Mechanics And Materials.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Catalytic steam gasification of waste palm tree trunk derived bio-char. In: Applied Mechanics And Materials.

Abdul Razak, Ariffin (2013) Cellular manufacturing system for machine part cell formation and operation sequencing. In: 1st international Materials, industrial, and Manufacturing Engineering Conference,2013, 2013, Johor Bahru, Malaysia.

Abdullah, Afnizanfaizal and irayama, Akihiro and Yatsushiro, Satoshi and Matsumae, Mitsunori and Kuroda, Kagayaki (2013) Cerebrospinal fluid image segmentation using spatial fuzzy clustering method with improved evolutionary expectation maximization. In: 35th Annual International Conference of the IEEE EMBS, 3 - 7 July, 2013, Osaka, Japan.

Mahmud, M. R. and Numata, S. and Matsuyama, H. and Hosaka, T. and Hashim, M. (2013) Challenge and opportunities of space-based precipitation radar for spatio-temporal hydrology analysis in tropical maritime influenced catchment: case study on the upper and remote forested tropical watershed of Peninsular Malaysia. In: 8th International Symposium on Digital, 2013.

Alizadeh, Mojtaba and Hassan, Wan Haslina (2013) Challenges and opportunities of mobile cloud computing. In: 2013 9th International Wireless Communications and Mobile Computing Conference, IWCMC 2013.

Abdul Ghafar, Mohamed Najib (2013) Challenges Undermining Optimal Student Development in the Twenty-First Century Higher Education. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan (NASDEC 2013).

Asl, M. H. and Kama, N. (2013) A change impact size estimation approach during the software development. In: Proceedings Of The Australian Software Engineering Conference, ASWEC.

Ahdash, Abdelsalam and Hamzah, Esah and Ourdjini, Ali and Abdolahi, Ahmad (2013) Characterisation of Zeolite, Polyaniline and Zeolite/Polyaniline As antifouling Materials for Marine Applications. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013).

Sara, Y. Y. and Rashid, M. and Chuah, T. G. and Suhaimi, M. and Mohamed, N. N. (2013) Characteristics of airborne pm2.5 and pm2.5-10 in the urban environment of Kuala Lumpur. In: Advanced Materials Research.

Wahab, H. A. and Noordin, M. Y. and Hussain, M. S. and Izman, S. (2013) Characteristics of electroplated nickel layer on tungsten carbide. In: Applied Mechanics And Materials.

Belyamin, Belyamin and Mohd Noor, Alias and Hussein, Mohanad Hamzah and Said, Mazlan (2013) Characterization of diesel engine generator operating at different compression ratio fuelled with palm oil biodiesel. In: Applied Mechanics and Materials (Volume 388).

Abuelnuor, Abuelnuor and Abdul Wahid, Mazlan and Saat, Aminuddin and Hamzah, Afiqah and Mohd. Sies, Mohsin (2013) Characterization of flameless combustion of natural gas in laboratory scale furnace. In: The 6th International Meeting on Advances on Thermofluids, National University of Singapore, Singapore, 22-23 November 2013..

Gode, Ameya and Razak, Khamarrul Azahari (2013) Characterization of forest canopy gaps caused by landslides using high density airborne laser scanning. In: International Symposium & Exhibition on Geoinformation (ISG 2013), 24-25 September 2013, Universiti Teknologi Malaysia Kuala Lumpur, Malaysia.

Hassan, I. O. and Ismail, M. and Noruzman, A. H. and Yusuf, T. O. and Mehmannavaz, T. and Usman, J. (2013) Characterization of some key industrial waste products for sustainable concrete production. In: Material Design, Processing And Applications, Parts 1-4.

Mohd. Hashim, Asha Hasnimy and Lee, Ai Choo (2013) Chase trainer program in athlete with unilateral patellofemoral pain syndrome. In: International Conference on Sport, Exercise and Health Science, 22-23 August 2013, Kuala Lumpur.

Mohtar, Lilia Ellany and Abdullah, Fatin Aliah Phang and Sulaiman, Seth and Surif, Johari and Ibrahim, Nor Hasniza and Ali, Marlina (2013) Ciri-ciri kreativiti bakal guru fizik semasa menjalankan dua aktiviti pembelajaran fizik berasaskan amali. In: 2nd International Seminar on Quality & Affordable Education (ISQAE 2013).

Sheikh Salleh, Sheikh Hussain and Kamarulafizam, I. and Mohd. Noor, Alias and A. Harris, Arief Ruhullah and Oemar, Hamed and Yusoff, Khalid (2013) Classification of heart sound based on multipoint auscultation system. In: 2013 8th International Workshop on Systems, Signal Processing and Their Applications, WoSSPA 2013.

Jivanadham, L. B. and Mazidul Islam, A. K. M. and Katayama, Yoshiaki and Komaki, Shozo and Baharun, Sabariah (2013) Cloud cognitive authenticator (CCA): a public cloud computing authentication mechanism. In: 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013, 17-18 May 2013, Dhaka, Bangladesh.

Rawai, N. M. and Fathi, M. S. and Abedi, M. and Rambat, S. (2013) Cloud computing for green construction management. In: 2013 Third International Conference On Intelligent System Design And Engineering Applications (ISDEA).

Ahmad, Azlin and Yusof, Rubiyah (2013) Clustering the tropical wood species using Kohonen Self-Organizing Map (KSOM). In: 2nd International Conference on Advances in Computer Science and Engineering (CSE 2013).

Abd. Jalil, Aishah (2013) Co2 methanation on Ni-based mesostructured silica nanoparticles. In: 3rd ITB Catalysis Symposium,Institute Teknologi Bandung - CO2 Methanation on Ni-based Mesostructured Silica Nanoparticles.

Mansoor, Nafees and Mazidul Islam, A. K. M. and Baharun, Sabariah and Komaki, Shozo and Wada, Koichi (2013) CoAd: a cluster based adhoc cognitive radio networks architecture with broadcasting protocol. In: 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013, 17th-18th May 2013, Dhaka, Bangladesh.

Sarijari, Mohd. Adib and Lo, Anthony and Abdullah, Mohd. Sharil and De Groot, Sonia Heemstra and Niemegeers, Ignas G.M.M. and A. Rashid, Rozeha (2013) Coexistence of heterogeneous and homogeneous wireless technologies in smart grid-home area network. In: International Workshop on Internet of Things Technologies 2013.

Abu Bakar, Zainudin and Ali, Rafaquat (2013) Cognitive styles in students’ learning and quality education: an exploration of the fundamental issues underpinning. In: 2nd International Seminar on Quality and Affordable Education 2013.

Tan, Yin Peen and Arshad, Mohammad Yusof (2013) Collaborative and self-directed learning processes : a case study in Malaysia chemistry PBL lesson. In: 2nd International Seminar on Quality and Affordable Education (ISQAE 2013), 7th-10th October 2013, UTM Skudai, Johor, Johor Bahru.

Marwah, O. M. F. and Sharif, S. and Ibrahim, M. and Idris, M. H. (2013) Collapsibility studies of MJM acrylate patterns for investment casting. In: Applied Mechanics And Materials.

Mohammed, H. A. and Golieskardi, M. and Munisamy, K. M. and Wahid, M. A. (2013) Combined convection heat transfer of nanofluids flow over forward facing step in a channel having a blockage. In: Applied Mechanics And Materials.

Saeed, Faisal and Salim, Naomie and Abdo, Ammar and Hamza, Hentabli (2013) Combining multiple clusterings of chemical structures using cumulative voting-based aggregation algorithm. In: Asian Conference on Intelligent Information and Database Systems 2013, 18-20 March 2013, Kuala Lumpur, Malaysia.

Muzahidul Islam, Arshad K. M. and Zeb, Asim and Wada, Koichi (2013) Communication protocols on dynamic cluster-based wireless sensor network. In: 2013 International Conference on Informatics, Electronics and Vision, ICIEV 2013, 17-18 May 2013, Dhaka, Bangladesh.

Sutan Ahmad Nawi, Haslinda and Ahmad Shukor, Nur Syufiza and Basaruddin, Suzana and Omar, Siti Fatimah and Abdul Rahman, Azizah (2013) Community ICT hubs sustainability: result from a field study of ICT4D project. In: international Conference on Management, Leadership and Governance (ICIME 2013), 2013.

Ausordin, Siti Fatimah and Abdul Rahim, Sharul Kamal and Seman, Norhudah and Dewan, Raimi (2013) A compact 3-DB coupler on a dual substrate layer with a rectangular slotted microstrip ground plane. In: 2013 IEEE BUSINESS ENGINEERING AND INDUSTRIAL APPLICATIONS COLLOQUIUM (BEIAC 2013), 7-9 April 2013, Malaysia.

Ismail, M. F. and Rahim, M. K. A. and Hamid, M. R. and Majid, H. A. and Yusof, M. F. M. (2013) Compact dual-fed slotted circular polarization antenna with reflector for RF energy harvesting. In: 2013 7th European Conference on Antennas and Propagation, EuCAP 2013.

Wan Muhamad, Wan Asilah and Abd. Rahman, Tharek and Jamlos, Mohd. Faizal (2013) A compact RLSA antenna with polyproplyene composite. In: 2013 IEEE Symposium on Wireless Technology and Applications (ISWTA),, 22-25 Sept. 2013, Kuching, Sarawak, Malaysia.

Mokhtar, Muhammad Hazmi and A. Rahim, Mohamad Kamal and Murad, Noor Asniza and Abdul Majid, Huda (2013) A compact slotted microstrip patch antenna for RFID applications. In: 2013 IEEE International Conference on RFID Technologies and Applications, 4-5 Sept. 2013, Johor Bahru.

Shahri, Bibi Masoomeh Aslahi and Zadeh, Saeed Khorashadi and Adeyemi, Ikuesan Richard and Zainal, Anazida (2013) Comparative analysis of gravitational search algorithm and k-means clustering algorithm for intrusion detection system. In: 3rd International Conference on Computational Science, Engineering and Information Technology, CCSEIT 2013, 7 - 9 June 2013, Konya; Turkey.

Mohd. Azhar, Noor Aniqah and Ahmad, Anuar and Samad, Abd. Manan and Ma'Arof, Ismail and Hashim, Khairil Afendy (2013) Comparative geometric and radiometric evaluation of mobile phone, compact and DSLR cameras. In: 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, 8-10 March 2013, Kuala Lumpur, Malaysia.

Ahmed, Ishtiaque (2013) A comparative review of preliminary police crash report forms of selected agencies. In: Road Safety International Conference, 2013.

Islam, Shayla and Abdalla, Aisha H. and Habaebi, Mohamed H. and Latif, Suhaimi A. and Hassan, Wan H. and Hasan, Mohammad.K. and Ramli, H. A. M. and Khalif, Othman O. (2013) A comparative signaling cost analysis of macro mobility scheme in NEMO with mobility management protocol. In: 5th International Conference on Mechatronics ICOM'13, 2013.

Adnan, M. A. and Mohammad Abdur, Razzaque (2013) A comparative study of particle swarm optimization and cuckoo search techniques through problem-specific distance function. In: 2013 International Conference Of Information And Communication Technology, ICoICT 2013.

Mohmad Zakwan, Norhayati and Ahmad, Mohd. Fauzi and Jusoh, Ahmad and Mohd. Yusof, Shari (2013) Comparative study of TQM practices between Japanese and non-Japanese companies: proposed conceptual framework. In: International Manufacturing Engineering Conference (iMEC2013).

Suleiman, A. A. and Zainir, R. A. B. and Muhamad, N. A. B. and Bashir, N. (2013) Comparative study on effect of temperature and moisture on transformer insulation conductivity. In: Applied Mechanics And Materials.

Izzati, W.A. and Shafanizam, M. and Arief, Y. Z. and Makmud, M. Z. H. and Adzis, Z. and Muhamad, N. A. (2013) Comparative study on partial discharge characteristic in polymer-nanocomposite as electrical insulating material. In: Applied Mechanics And Materials.

A. Rashid, Ahmad Safuan (2013) A comparative study on three-dimensional and two-dimensional slope stability analysis in calculating the value of factor of safety. In: GEOCON International Conference 2013, Johor Malaysia, 28-30 October 2013 , 2013.

Attan, Anie and Sze, Wei Wong (2013) Comparing intentional vocabulary learning strategies of rote-copying vs read-plus. In: 1st International Conference on English Language Learning.

Abd. Malek, Zulkurnain (2013) Comparison of captured lightning waveforms in Malaysia with theoretical models. In: Universities Power Conference UPEC2013, 2013.

Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Najafian, G. (2013) Comparison of extreme responses from wheeler and vertical stretching methods. In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, 9-14 Jun 2013, Nantes, France.

Aliyu, Garba and Abd. Khalid, Saifulnizam and Mustafa, Mohd. Wazir and Usman, Jafaru and Shareef, Hussain (2013) Comparison of fast fourier and wavelet transforms with new improved walsh transform for power components estimation. In: 2013 IEEE Symposium on Huminities, Science and Engineering Research (SHUSER).

Yong, C. Y. and Sudirman, R. and Mahmood, N. H. and Chew, K. M. (2013) Comparison of human jogging and walking patterns using statistical tabular, scatter distribution and artificial classifiers. In: Advanced Materials Research.

Marsin, J. M. and Ariffin, S. I. and Raja Shahminan, Raja Nafida (2013) Comparison of legislation concerning people with disability and heritage environment in Malaysia and developed countries. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 August 2013, Kuching, Sarawak, Malaysia.

Grout, Ian and A'ain, Abu Khari (2013) A comparison of the education systems in Ireland and Malaysia in the field of electronic engineering from a faculty perspective. In: Proceedings Of The 24Th International Conference On European Association For Education In Electrical And Information Engineering, EAEEIE 2013, 30-31 May 2013, Chania, Greece.

Ani , Farid Nasir (2013) Compatibility study of automobile fuel system in bioethanol and gasoline blends. In: World Hybrid Technologies and Energy Conference (WorldHybrid).

Ahmad Anuar, Melati (2013) Competitive financial performance towards the sustainability of real estate investment trust. In: International Conference On Economics and Business Research 2013 (ICEBR), 2013.

Mahzan, M. I. and Muhamad, S. and Abdul Aziz, S. and Mat Ali, M. S. (2013) Composite wing flutter speed and frequency due to variable control surface deflection in low speed wind tunnel. In: Applied Mechanics And Materials.

Wan, Inn Goh and Mohamad, Noridah and Abdullah, Redzuan and Abdul Samad, Abdul Aziz (2013) Compression test and finite element analysis of foamed concrete cube. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET).

Golshan, Abolfazl and Ghodsiyeh, Danial and Gohari, Soheil and Ayob, Amran and Baharudin, B. T. Hang Tuah (2013) Computational inteligence in optimization of machining operation parameters of st-37 steel. In: 2012 International Conference on Mechanical Materials and Manufacturing Engineering, ICMMME 2012, 5 October 2012 through 6 October 2012, Dalian; China.

Zakaria, M.S. and Osman, K. and Saadun, M. N. A. and Manaf, M. Z. A. and Mohd. Hanafi, M. H. (2013) Computational simulation of boil-off gas formation inside liquefied natural gas tank using evaporation model in ansys fluent. In: Applied Mechanics And Materials.

Chin, Chea Neo and Lee, Eileen Su Ming and Khalid, PuspaInayat and Che, Fai Yeong (2013) Computerized assessment for early screening of children with handwriting difficulty. In: Applied Mechanics and Materials (Volume 432).

Hj. Salam, Abdul Rahim and Mustaffa, Faizal Yamimi and Abdullah, Tina and Hj. Salam, Md Sah (2013) The concept of technology supported face-to-face collaborative learning via digital interactive audio capturing tool. In: Interactive Computer and digital Media, 2013.

Yusof, Yuhani and Sarmin, Nor Haniza and Fong, Wan Heng (2013) The concepts of persistent and permanent in non semi-simple DNA splicing system. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM, 6-8 Nov, 2013, Penang, Malaysia.

Zulkepli, M. B. and Sipan, I. B. and Jibril, J. D. (2013) Conceptual framework for green affordable home in Malaysia. In: Advanced Materials Research.

Idris, Nurul Hawani and Jackson, M. J. and Ishak, M. H. I. (2013) A conceptual model of the automated credibility assessment of the volunteered geographic information. In: International Symposium of digital Earth, 2013.

Zirawani, B. and Salihin, M. N. and Noorfa, H. M. (2013) The conceptual model of uncertainty factors in environmental issues on late delivery for construction industry. In: Advanced Materials Research.

Omar, Nor Miza Hazwani and M. Tap, Masine and Redzuan, Norizah (2013) Conceptual optimization model of inventory/distribution network with multi role nodes. In: International Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), 4-6 December 2013, Johor Bahru, Malaysia.

Abdul Hamid, Abu Bakar and Dawei, Zhang and Said, Fazila and Chin, Thoo Ai and Sukati, Inda (2013) The conceptual relationship between green supplier development and organizational performance. In: 5th Annual Euromed Conference Of The Euromed Academy Of Business: Building New Business Models For Success Through Competitiveness And Responsibility.

Patak, Andi Anto and Abu Naim, Hamimah and Said, Hasbullah and Asik, Nur (2013) Conceptualizing assessment of final project writing in English As Foreign Language (EFL): an Indonesian context. In: Technology, Education. and Science International Conference 2013 PPI-UTM TESIC 2013.

Zaini, Farah and Arrifin, Arfaliza and Hussin, Khadijah and Suratman, Robiah and Abd. Rasid, Kamaruzaman (2013) considerations on developing urban underground land in Malaysia: a review. In: 9th International Symposium on digital Earth, Kuching, Sarawak, Malaysia (26-29 August 2013).

Kaur, Sharanjit and Ibrahim, Roliana and Selamat, Ali (2013) Constraints on achieving key performance indicators for scholarly publication among academic staff: case of a Malaysian Public University. In: International Conference on Research and Innovation in Information Systems 2013.

Shahri, A. B. and Ismail, Z. and Ab. Rahim, N. Z. (2013) Constructing conceptual model for security culture in health information systems security effectiveness. In: Advances In Intelligent Systems And Computing.

Kitajima, Tatsuo and Feng, Zhonggang (2013) Contribution of voltage-dependent ion channels to subthreshold resonance. In: 9th Asian Control Conference (ASCC), JUN 23-26, 2013, Istanbul, TURKEY.

Abdullah, Majid Adlan and Mohamed Yatim, Abdul Halim and Tan, Chee Wei and Samosir, Ahmad Saudi (2013) Control of a bidirectional converter to interface ultracapacitor with renewable energy sources. In: 2013 IEEE International Conference On Industrial Technology (ICIT).

Kamarudin, M. N. and Husain, A. R. and Ahmad, M. N. (2013) Control of uncertain nonlinear systems using mixed nonlinear damping function and backstepping techniques. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Ismail, Muhmad Fahezal and Peng, Kemao and Hamzah, Norhazimi and Md. Sam, Yahaya and Aripin, Muhamad Khairi (2013) A control performance of linear model and the Macpherson Model for active suspension system using composite nonlinear feedback. In: Proceedings - 2012 Ieee International Conference On Control System, Computing And Engineering, ICCSCE 2012.

Abdul Aziz, Azhar and Andwar, Amin Mahmoudzadeh and Muhamad Said, M.F. and Abdul Latiff, Z. (2013) Controlled Auto-Ignition (CAI) combustion in a two-stroke cycle engine using hot burned gases. In: Conference, 2012.

Md. Rozali, S. and Kamarudin, M. N. and Rahmat, M. F. and Husain, A. R. and Abidin, A. F. Z. (2013) Controller design for position tracking of nonlinear system. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Sheng, L. K. and Ibrahim, Z. and Buyamin, S. and Ahmad, A. and Ibrahim, I. and Jusof, M. F. M. and Naim, F. and Tumari, M. Z. M. and Ghazali, K. H. (2013) Convergence and diversity evaluation for vector evaluated particle swarm optimization. In: 2013 Proceedings of International Conference on Modelling, Identification and Control, ICMIC 2013.

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar and Muhamad Said, M. F. and Abdul Latiff, Zulkanain (2013) A converted two-stroke cycle engine for compression ignition combustion. In: 2nd International Conference on Recent Advances in Automotive Engineering and Mobility Research, ReCAR 2013, 16 - 18 December 2013, Kuala Lumpur; Malaysia.

Saud, Muhammad Sukri and Mohd. Hisham, Mohd. Hizwan and Nordin, Mohd. Safarin and Amin, Nor Fadila and Buntat, Yahya (2013) Cooperative problem based learning (CPBL) model: a technical review. In: International Conference on Agricultural, Food an Biological Engineering (ICAFBE 2012) part IV, May 11-13, 2012, Guangzhou, China.

Kamarul Asri, Asma and Hamzah, Esah (2013) Corrosion behaviour of lead-free and sn-pb solders in 3.5wt% NACL. In: Advanced Materials Research (Volume 686).

Shaddad, Redhwan Q. and Mohammad, Abu Bakar and Al-Hetar, Abdulaziz M. and AI-Gailani, Samir A. (2013) Cost-effective 2.5 gb/s bidirectional WDM pon using single optical source at the central office. In: 2013 IEEE 9th International Colloquium On Signal Processing And Its Applications (CSPA).

A. Rashid , Ahmad Safuan (2013) Coupling effect of scution variation on riversidebank stability. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013).

Abdul Aziz, Zainal (2013) Crashworthiness of frontal longitudinal of Rain Forest Vehicle (RFV). In: 4th International Graduate Conference on Engineering, Science and Humanities.

Ahmad, Mohd. Hamdan (2013) Critical appraisal of some exterior finishes exposed to saline air: a review. In: Asia Future Conference 2013 (AFC13), 2013.

Noroozi, E. and Daud, S. B. M. and Sabouhi, A. (2013) Critical evaluation on steganography metrics. In: Advanced Materials Research.

A. Rahman, Roshanida (2013) cross-Linked Enzyme Aggregates of Recombinant Xylanase from Trichoderma Reesei.of Recombinant Xylanase from Trichoderma Reesei. In: International Congress of the Malaysian society for Microbiology (ICMSM), 2013.

Abd. Jalil, Aishah (2013) Cumene cracking over platinum and molybdenum oxide loaded on mesostructured silica nanoparticles. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), Desaru, Johor Bahru, 9-10th December 2013.

Jamaluddin, J. and Lee, M. C. (2013) Curing properties of uv-cured pressure sensitive adhesives. In: Advanced Materials Research.

Mohamad Noor, Mardiana and Hassan, Wan Haslina (2013) Current threats of wireless networks. In: 3rd International Conference on digital Information Processing and Communications DICTAP 2013, Czech Republic.

Ghazi, N. A. and Malek, N. A. N. N. and Hamdan, S. (2013) Cytostatic activity of clinoptilolite against human cervical cancer cell lines using three different media-sterilization techniques. In: Advanced Materials Research.

Amini, B. and Ibrahim, R. and Othman, M. S. (2013) Data sets for offline evaluation of scholar's recommender system. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Zakaria, R. and Amirazar, A. and Mustaffar, M. and Mohammad Zin, R. and Abd. Majid, M. Z. (2013) Daylight factor for energy saving in retrofitting institutional building. In: Advanced Materials Research.

Mohd. Nasir, Mohamad Na'im and Jusoh, Awang and Khamis, Alias (2013) DC bus instability driving by photovoltaic source with constant power load. In: Applied Mechanics and Materials (Volumes 313-314).

Chau, Loon Wai and Ho, C. S. and Choo, H. H. (2013) Decarbonising Iskandar Malaysia: towards an institutional framework for low-carbon urban & regional planning. In: 2017 AESOP Congress, 11-15 Jul 2012, Ankara, Turkey.

Oktaviandri, Muchamad and Hassan, Adnan and Mohd. Shaharoun, Awaluddin (2013) Decision support tool for job shop scheduling with job cancellation. In: International Conference on Engineering of Tarumanagara (ICET 2013).

Hairul Nizam, Ismail (2013) Demand forecasting: a review on qualitative methods and surveyed done by delphi technique. In: Conference.

Ahmed Abdel Razak, Yasser Mohamed (2013) Design and construction of low-cost Remotely Operated UnderWater Vehicle (ROV). In: The International Conference on Marine Safety and Environment, 12-13 November 2013, Johor Bahru, Malaysia. Pg: 250-256.

Kang, T. W. and Yong, L. T. and Fai, Y. C. and Ming, E. S. L. (2013) Design and development of an omnidirectional mobile robot. In: Applied Mechanics And Materials.

Abbaszadeh, J. and Najafiaghdam, E. and Abdul Rahim, H. and Abdul Rahim, R. and Sarafi, S. and Suleiman, A. (2013) Design and implementation a microcontroller based high power ultrasonic dispersion system with self frequency adjusting property. In: International Conference On Power Engineering, Energy And Electrical Drives.

Salam, Z. and Facta, M. and Amjad, M. (2013) Design and implementation of a highly efficient DBD ozonizer using the single switch resonant converter with piezoelectric transformer. In: 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference And Exposition (APEC 2013).

Ahmad, Arshad (2013) Design and optimization of Semicontinuous Heterogeneous Azeotropic Distillation (SHAD) process. In: 2nd Conference on Emerging Energy & Process technology 2013 (CONCEPT 2013), 9-10 Dec 2013, 2013, Desaru.

Perang, M. R. M. and Abdul Latiff, Z. and Aziz, A. A. and Mokhri, M. A. (2013) Design of a four-stroke homogeneous charge compression ignition engine. In: Applied Mechanics And Materials.

Kasri, N. F. and Piah, M. A. M. and Suleiman, A. A. and Jamail, N. A. M. and Bashir, N. and Muhamad, N. A. (2013) Design of HV switching for polarization & depolarization current measurement. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Abu Bakar, Saiful Anuar (2013) Design of remotely operated vehicle for underwater research. In: Proceedings of 6th Malaysian International Seminar on antarctica (MISA6).

Weigl, J. D. and Saidi, H. and Inayati, Inayati (2013) Design, testing and optimisation of a hydrogen fuel cell motorcycle for South East Asia. In: 2013 8Th International Conference And Exhibition On Ecological Vehicles And Renewable Energies, Ever 2013.

Nekooei, M. J. and Jaswar, J. and Priyanto, A. (2013) Designing fuzzy backstepping adaptive based fuzzy estimator variable structure control: applied to internal combustion engine. In: Applied Mechanics And Materials.

Elmi, A.H. and Ibrahim, Subariah and Sallehuddin, Roselina (2013) Detecting sim box fraud using neural network. In: International Conference on IT Convergence and Security, ICITCS 2012, 5 December 2012 through 7 December 2012, Pyeong Chang; South Korea;.

Che Harun, Fauzan Khairi and Abdalla Sabeel, Thowiba Mohamed and Stephan, Enyinnaya Eluwa and Abdalla Sabeel, Solima Mohamed (2013) Detection of volatile compounds in urine using an electronic nose instrument. In: Proceedings - 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013.

Choi, Sang Long and Abdul Aziz, Mohd Hamizan (2013) Determinants for product and process innovation: a review in the perspective of TQM practices. In: Advanced Materials Research (Volume 787).

Ali Khan , Mohd. Noor Azli (2013) Determinants of web based financial reporting in Malaysia. In: Global Institute of Applied Business Research (GIABR) 2013 Auckland International Conference: Paper 2, 2013.

Afrianty, Iis and Nasien, Dewi and Abdul Kadir, Mohammed Rafiq and Haron, Habibollah (2013) Determination of gender from pelvic bones and patella in forensic anthropology : a comparison of classification techniques. In: 1st International Conference on Artificial Intelligence, Modelling and Simulation, AIMS 2013, 2013, Sabah, Malaysia.

Ab Muis, Zarina (2013) Determination of optimal solar-electricity generation using MILP model. In: PSE Asia 2013.

Ahmad , Yusof (2013) Determination of poisson's ratio for local timber. In: n/a, 2013.

Kuan, Yew Wong and Madadi, Najmeh (2013) A deterministic aggregate production planning model considering quality of products. In: 2013 International Conference On Manufacturing, Optimization, Industrial And Material Engineering (MOIME 2013).

Mohammad, Roslina (2013) Develop improvement maintenance management of Agusta A109 Helicopter at Army Aviation Unit to minimize out sourcing. In: International Conference On Engineering Business Management, 2013, Kuala Lumpur.

Attan, Anie and Abdul Raof, Abdul Halim and Hamzah, Masputeriah and Abdullah, Khairi Izwan and Mohd. Omar, Noor Abidah (2013) Developing a profile of workplace written communication. In: Akdeniz Language Studies Conference 2012.

Mohamed, Nassrin Ibrahim and Abdul Rahman, Tharek and Abdul Rahman, Alias (2013) Developing alternatives of small monopole antenna design for achieving 4G-LTE requirements in a limited antenna size. In: Progress In Electromagnetics Research Symposium.

Saedi, Amin and A. Iahad, Noorminshah (2013) Developing an instrument for cloud computing adoption by small and medium - sized enterprises. In: 3rd International Conference on Research and Innovation in Information Systems â?? 2013 (ICRIISâ??13).

Abdullah , Fatin Aliah Phang (2013) Developing interactive teaching guide of Cooperative Problem-Based Learning (CPBL) for engineering lecturers. In: n/a.

Normah Maan (2013) Developing multiple linear regression model fordioxin furan emission in the incineration process. In: MJIIT-JUC Joint International Symposium 2013, 2013.

Firdaus, Adila and Ghani, Imran and Mohd. Yasin, Nor Izzaty (2013) Developing secure websites using Feature Driven Development (FDD): postgraduate vs undergraduate case study. In: 5th International Conference on Internet (ICONI 2013), Pattaya, Thailand..

Oluwagbemi, Oluwatolani and Asmuni, Hishammuddin (2013) Development of a scalable parser for extracting artifacts during model-based test case generation process. In: International Journal of Software Engineering and Technology, IJSET Vol. 1, No. 2 (2014).

Hasim, Norhaslinda and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Mohamed Kassim, Anuar and Abdullah, Shahrum Shah (2013) Development of fuzzy logic water bath temperature controller using MATLAB. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012, 23-25 November 2012, Penang, Malaysia.

Mohd. Muji, Siti Zarina and Karim, Randy Justin and Abdul Rahim, Ruzairi (2013) The development of hardware for optical tomography system. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM2013), 2013.

Abdul Talib , Hayati @ Habibah (2013) Development of Malaysia food franchising: an overview. In: The First International Conference on Human Capital and Knowledge Management 2013, 3-4 December 2013.

Goh, W. I. and Mohamad, N. and Abdullah, R. (2013) Development of precast lightweight foamed concrete sandwich panel (PLFP) with double shear truss connector: an overview. In: Advanced Materials Research.

Mohd. Azhar, Noor Aniqah and Ahmad, Anuar (2013) Development of rapid and low cost archaeological site mapping using photogrammetric technique. In: 8th international Symposium on Digital Earth , 2013.

Abdul Rani, Mat Rebi (2013) Development of road safety model for Malaysian road. In: UNSPECIFIED, 2013.

Abdul Rahman, Norazmein and Norazmein Abdul Rahman, Norazmein and Safian Sharif , Norazmein and L . H. Tan, Norazmein and P. L. Tan, Norazmein and Izman Sudin, Norazmein (2013) Development of roughness models for sanded durian wood surfaces. In: The 1st International Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), 2013.

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) Development of students’ knowledge-behavioural changes in relation to sustainability through a case study. In: 6th International Forum on Engineering Education (IFEE 2012).

Zainir, R. A. and Muhamad, N. A. and Jamail, N. A. M. and Piah, M. A. M. and Suleiman, A. A. and Kasri, N. F. (2013) Development of user panel for polarization and depolarization current (PDC) measurement analysis of high voltage (HV) machine insulation system. In: International Conference On Power Engineering, Energy And Electrical Drives.

A Rahim, Mohamad Kamal (2013) Development of wireless point to point and point to multipoint communication for crowd monitoring system. In: n/a, 2013.

Ul haq, Bakhtiar and Ahmed, Rashid and Shaari, Amiruddin and Hussain, Rafaqat and Mohamad, Mazmira (2013) DFT investigations of Ti, V doped ZnO based diluted magnetic semiconductors. In: The 27th Regional Conference of Solid State Science and Technology (RCSSST27) 2013, 20-22 Dec, 2013, Sabah, Malaysia.

Bahri, Bahram and Abdul Aziz, Azhar and Shahbakhti, Mahdi and Muhamad Said, Mohd. Farid (2013) A diagnosis technique for the identification of misfire in a converted-diesel HCCI engine. In: Latest Trends In Circuits, Control and Signal Processing, 2013.

Zainal, Nurbaya and Zulkefle, H. and Mahmood, M. R. (2013) Dielectric and structural properties of RF magnetron sputter grown lead zirconium titanate thin film: a review. In: Advanced Materials Research.

Omar, M. F. M. and Sharif, S. and Ibrahim, M. and Idris, M. H. and Fadzil, A. S. A. and Amin, A. M. (2013) Differential ceramic shell thickness evaluation for direct rapid investment casting. In: Applied Mechanics And Materials.

Abuobieda, Albaraa and Salim, Naomie and Binwahlan, Mohammed Salem and Osman, Ahmed Hamza (2013) Differential evolution cluster-based text summarization methods. In: 2013 INTERNATIONAL CONFERENCE ON COMPUTING, ELECTRICAL AND ELECTRONIC ENGINEERING (ICCEEE), 2013, Sudan.

Ahmad, Anuar and Tahar, Khairul Nizam and Udin, Wani Sofia and Hashim, Khairil Afendy and Darwin, Norhadija and Mohd. Room, Mohd. Hafis and Abdul Hamid, Nurul Farhah and Mohd. Azhar, Noor Aniqah and Azmi, Shahrul Mardhiah (2013) Digital aerial imagery of unmanned aerial vehicle for various applications. In: IEEE International Conference on Systems, Control System, Computing & Engineering, 2013, 2013.

Ahmad, Anuar (2013) Digital elevation model and orthophoto production of coastal area for erosion monitoring using close range photogrammetry approach. In: Seminar on Advance Active Remote Sensing, 2013, 2013.

Adeyemi, Ikuesan Richard and Abd. Razak, Shukor and Zainal, Anazida and Nor Azhan, Nor Amira (2013) A digital forensic investigation model for insider misuse. In: 3rd International Conference on Computational Science, Engineering and Information Technology, CCSEIT 2013, 7 June 2013 through 9 June 2013, Konya; Turkey.

Hussien Al-Ashwal, Rania and Eko Supriyanto, Eko Supriyanto and Abdul Rani, Nur Anati and Abdullah, Nur Azmira and Aziz, Nur Illani and Mahfooz, Rania (2013) Digital processing for computed tomography images: brain tumor extraction and histogram analysis. In: 14th WSEAS International Conference on Mathematical Methods and Computational Techniques in Electrical Engineering (MMACTEE '13), 2013.

Aliyu, G. and Khalid, S. B. A. and Mustafa, M. W. and Usman, J. and Shareef, H. (2013) Digitized walsh algorithm for reactive power estimation. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Abdul Latiff , Nurul Mu'azzah and Nurul Mu'azzah Abdul Latiff , Nurul Mu'azzah (2013) Disaster recovery system using multi-hop cellular network. In: Project Profile GUP TIER 2 Vot. 02J93, 2013.

Abdullah, Rini Asnida and Mohd. Amin, Mohd. For and A. Rashid, Ahmad Safuan (2013) Discrete element modelling in rock slope stability analysis. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

Soh, A. C. and Marhaban, M. H. and Khalid, M. and Yusof, R. (2013) A discrete-event traffic simulation model for multilane-multiple intersection. In: 2013 9Th Asian Control Conference, ASCC 2013.

Aliagha, Godwin Uche and Mar Iman, Abdul Hamid and Mohd. Ali, Hishamuddin and Kamaruddin, Norhaya and Ali, Kherun Nita (2013) Discriminant factors of flood insurance demand for flood-hit residential properties: a case for Malaysia. In: Journal of Flood Risk Management.

Ting, Chee-Ming and King, Simon and Salleh, Sh-Hussain and Ariff, A. K. (2013) Discriminative tandem features for hmm-based EEG classification. In: 2013 35TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC).

Anuar, Aznah Nor and Farrah Aini Dahalan, Aznah Nor and Aznah Nor anuar, Aznah Nor (2013) Distribution of bacteriachlorophyll in aerobic granular sludge with diurnal cycle. In: Symposium on Algae Research, 2013, 2013.

Mazlan, Nur Shima Fadhilah and Ahmad Khairudin, Nurul Bahiyah (2013) Docking study of ß-glucosidase B (BglB) from P. polymyxca with cellobiose and cellotetrose. In: International Conference of Medical, Environmental and Biotechnology (ICMEB 2013).

Wong, Kuan Yew and Nikakhtar, Amin and Zarebidaki, Ali (2013) Document management in construction for shorter project lead time using web-based software. In: ICSDEC 2012: Developing the Frontier of Sustainable Design, Engineering, and Construction - Proceedings of the 2012 International Conference on Sustainable Design and Construction.

Abdullah, Haslaile and Cvetkovic, Dean. (2013) Double density wavelet for EEG signal denoising. In: 2nd International Conference on Machine Learning and Computer Science, 2013.

Baharvand, Mohammad and Ahmad, Mohd. Hamdan and Abdul Majid, Roshida and Safikhani, Tabassom (2013) Double skin façade performance in tropical climate. In: Asia Future Conference 2013 (AFC13), 2013.

Abdul Rani, Mohd. Subri and Abdul Rahim, Sharul Kamal and Abd. Rahman, Tharek and Peter, Thomas and Cheung, Sing Wai (2013) Dual-band transparent antenna for ISM band applications. In: Progress in Electromagnetics Research Symposium 2013, 25-28 March 2013, Taipei, Taiwan.

Safaai, Siti Sarah and Chew, W.X. and Muniandy, S.V. and Yap, S. L. and Wong, C. S. (2013) Dynamic light scattering fluctuation analysis for structural phase characterization in disordered dusty plasma. In: 2012 NATIONAL PHYSICS CONFERENCE (PERFIK 2012), NOV 19-21, 2012, Bukit Tinggi, Malaysia.

Ng, B. C. and Mat Darus, I. Z. and Kamar, H. M. and Md. Lazin, M. N. and Hussein, M. (2013) Dynamic modeling of an automotive air conditioning system and an auto tuned PID controller using extremum seeking algorithm. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Sadeghi, Faraz and Kueh, Ahmad Beng Hong and Vafaei, Mohamad Reza (2013) Dynamic response of composite footbridges under running pedestrian load. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Adnan, Azlan (2013) Dynamic soil-pile interaction under earthquake events. In: AWAM International Conference on Civil Engineering & Geohazard Information Zonation, 28-30 Aug 2012, Batu Ferringhi, Penang.

Mohd. Daud, Salwani and Abas, Hafiza (2013) Dyslexia baca’ mobile app - the learning ecosystem for dyslexia. In: 2nd international Conference on Advanced Computer Science Applications and Technologies, 2013, Kuching, Malaysia.

Chew, W. C. and Hashim, Mazlan and Lau, A. M. S. and Battay, E. and Kang, C. S. (2013) Early detection of plant disease using close range sensing system for input into digital earth. In: 8th International Symposium on Digital, 2013.

Saat, Aminuddin and Abdul Wahid, Mazlan and Mohd Farid, Muhamad Said (2013) Early flame development in the combustion of droplet and vapour mixtures. In: Applied Mechanics And Materials.

Ismail, M. and Yusuf, T. O. and Noruzman, A. H. and Hassan, I. O. (2013) Early strength characteristics of palm oil fuel ash and metakaolin blended geopolymer mortar. In: Material Design, Processing And Applications, Parts 1-4.

Umar, Zahrul and Ahmad, Anuar and Wan Mohd. Akib, Wan Abdul Aziz (2013) Early warning system for landslide hazard caused by earthquake and rainfall in West Sumatera province, Indonesia. In: IEEE International Conference on Systems, Control System, Computing & Engineering, 2013, 2013.

Abd Manan, Amerrudin (2013) An easy way to understand economics text for entrepreneurs. In: Second International Conference on Engineering Business Management. Hotel Istana Kuala Lumpur. 27-28th August 2013., 2013.

Ma, Chow Khun and Awang, Abdullah Zawawi and Omar, Wahid (2013) Eccentrically loaded externally confined HSC columns. In: GEOCON 2013, 2013.

Razack, N. T. A. and Muhamad Ludin, Ahmad Nazri (2013) Ecological footprint and food consumption in Minna, Nigeria. In: The 8th International Symposium on digital Earth 2013.

Mukhtaruddin, R. N. S. R. and Rahman, H. A. and Hassan, M. Y. (2013) Economic analysis of grid-connected hybrid photovoltaic-wind system in Malaysia. In: 4th International Conference on Clean Electrical Power: Renewable Energy Resources Impact, ICCEP 2013.

Alwee, Razana and Shamsuddin, Siti Mariyam and Sallehuddin, Roselina (2013) Economic indicators selection for crime rates forecasting using cooperative feature selection. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B, 18-20 December 2012, Putrajaya, Malaysia.

Hastuti, Kurnia and Hamzah, Esah and Hashim, Jasmi (2013) Effect of ageing treatment on the microstructures of ti-50.7at.%ni shape memory alloy. In: Advanced Materials Research (Volume 686).

Idham, M. K. and Hainin, M. R. and Yaacob, H. and Warid, M. N. M. and Abdullah, M. E. (2013) Effect of aging on resilient modulus of hot mix asphalt mixtures. In: Advanced Materials Research.

Abu Bakar, Tuty Asma and Tuty Asma Abu Bakar, Tuty Asma and Esah Hamzah, Tuty Asma and Safaa Najah Saud, Tuty Asma (2013) Effect of aging treatment on the microstructures and tensile properties of Cu-Al-Ni-Co shape memory alloys. In: International Symposium on Advanced Materials Science 2013 (ISAM 2013)Japan, 2013, Japan.

Harun, Zawati and Jamalludin, Mohd. Riduan and Yunos, Muhamad Zaini and Shohur, Muhamad Fikri and Ismail, Ahmad Fauzi (2013) The effect of amorphous rice husk silica to the polysulfone membrane separation process. In: Advanced Materials Research.

Abubakar, T. and Rahman, M. and Stokes, J. (2013) Effect of annealing treatment on the wear properties of ni rich niti alloy coatings. In: 8th International Materials Technology Conference and Exhibition, JUL 09-12, 2012, Petaling Jaya, Malaysia.

Niakan, A. and Idris, M. H. and Ourdjini, A. and Karimian, M. (2013) Effect of applying air pressure on gas porosity in lost foam casting of al-si alloy. In: Advanced Materials Research.

Yusof, Mustafa and Afripin, Mohammad Amirul Affiz (2013) Effect of beam profile size on bus superstructure strength having rollover crash. In: 2013 2nd International Conference on Advanced Materials Design and Mechanics (ICAMDM), 2013, Kuala Lumpur.

Sundari, R. and Hua, T. I. and Rusli Yosfiah, M. (2013) Effect of calcinations on characterizations of fabricated nano manganese ferrite. In: Advances In Chemical, Material And Metallurgical Engineering, Pts 1-5.

Ishak, Muhammad Farhan and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah and Abdul Rahman, Shaifuzain (2013) The effect of cannulated screw placement angle in the management of femoral neck fracture. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Ramdan, Raden Dadan and Djuansjah, Joy Rizki Pangestu and Suratman, Rochim and Hamzah, Esah and Sudin, Izman (2013) Effect of Cold Rolling Treatment on the Formation of Titanium Oxide Layer on Ti6Al4V Alloys by Thermal-electrochemical Anodizing Processes. In: Materials Science Forum.

Saiman, M. P. B. and Wahab, M. S. B. and Wahit, M. U. B. (2013) The effect of compression temperature and time on 2D woven kenaf fiber reinforced acrylonitrile-butadiene-styrene (ABS). In: Applied Mechanics And Materials.

Hassan, Nor Diana and Muhamad, Ida Idayu and Sarmidi, Mohammad Roji (2013) The effect of copigmentation on the stability of butterfly pea anthocyanins. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov, 2013, Bandung, Indonesia.

Jawaid, M and Hassan, Azman and Abdul Khalil, H.P.S (2013) Effect of coupling agent on mechanical and thermal behaviour of oil palm/jute hybrid composites. In: Green Technologies For Sustainable & Innovation In Materials.

Harun, Zawati and Shohur, Muhamad Fikri and Yunos, Muhamad Zaini and Jamalludin, Mohd. Riduan and Ismail, Ahmad Fauzi (2013) The effect of crystalline rice husk silica on polysulfone membrane for wastewater treatment. In: Applied Mechanics And Materials.

Rusdi, Nur and Noordin, M. Y. and Izman, S. and Kurniawan, Denni (2013) The effect of cutting parameters on power consumption during turning nickel based alloy. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Anuar, Aznah Nor (2013) The effect of cycle time on the characteristics and perFormance of aerobic granular sludge treating high strength wastewater. In: 5th IWA-ASPIRE Conference & Exhibition, 2013.

Mat Lazim, Mat Lazim and Ahmad Razimi, Ahmad Razimi and Abu Bakar, Abd. Rahim and Abdul Hamid, Abu Bakar and Abdul Hamid, Mohd. Kameil and Elleuch, Riadh (2013) The effect of external grit particles on brake squeal noise of commercial brake pads. In: Eurobrake 2013, 2013, Germany.

Faramoushjan, Shahram Ghaedi and Chinaei, Farhad and Bakhsheshi-Rad, Hamid Reza and Idris, Mohd Hasbullah (2013) Effect of fluoride conversion coating on corrosion of behavior of mg-ca-zn alloy. In: Advanced Materials Research (Volumes 712-715).

Latiff, Z. A. and Aziz, A. A. and Mohd Perang, M. R. and Abdullah, N. (2013) The effect of fuel additives on gasoline heating value and spark ignition engine performance: case study. In: Applied Mechanics And Materials.

Rawi, Noraihan Afiqah and Mohd. Kasim, Abdul Rahman and Ali, Anati and Isa, Mukheta and Shafie, Sharidan (2013) The effect of g-jitter on double diffusion by mixed convection past an inclined stretching sheet. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM 21, 6-8 Nov, 2013, Penang, Malaysia.

Heidari, Milad and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Kashani, Jamal and Syahrom, Ardiyansyah (2013) Effect of humeral stem shape on displacement in elbow implant. In: Applied Mechanics And Materials.

Pakir, Faizal and Abdul Karim, Ahmad Tarmizi and N. L. Ling, Felix and Kassim, Khairul Anuar (2013) Effect of humic acid on geochemistry properties of kaolin. In: Advanced Materials Research.

Mohammed, H. A. and Om, N. I. and Wahid, M. A. (2013) Effect of inclination angle on three-dimensional combined convective heat transfer of nanofluids in rectangular channels. In: Applied Mechanics And Materials.

Priyanto, Agoes and Najmi, M. and Maimun, A. and Mohamed, Y. (2013) Effect of increasing rudder deflection on rudder inflow for LNG vessel in shallow water. In: 2nd International Symposium on Materials Science and Engineering Technology, 27- 28 June 2013, Guangzhou, China.

Othaman, Z. and Wibowo, E. and Sakrani, S. (2013) The effect of indium mole fraction on the growth behavior of inxga1-xas nanowires (NWS) grown using MOCVD. In: Nanosynthesis And Nanodevice.

Rashidi, Mohd. M. and Idris, Mohd. Hasbullah and Shayfull, Z. (2013) The effect of inoculation on properties of modified ductile Ni-resist alloy. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov, 2013, Bandung, Indonesia.

Ahmmad, Siti Nor Zawani and Lee, Su Ming Eileen and Che, Fai Yeong (2013) Effect of intermittent haptic disturbance in motor skill training. In: Applied Mechanics and Materials (Volume 432).

Abd. Jalil, Aishah and Herma dina Setiabudi, Aishah and Sugeng Triwahyono, Aishah (2013) Effect of iridium on hydrogen spillover phenomenon for cumene cracking over Ir/Pt-Hzsm5. In: 8th Indonesian Zeolite Seminar, 4-­?5 June 2013, Bandung, Indonesia, June 2013, Bandung Indonesia.

Mohamed Ariff, Azmah Hanim and Ourdjini, Ali and Idris, Siti Rabiatul Aisha and Osman, Saliza Azlina (2013) Effect of isothermal aging 2000 hours on intermetallics formed between ni-pd-au with sn-4ag-0.5cu solders. In: Advanced Materials Research.

Abbas, Malik and Ahmad, Baharin and Abbas, Talib (2013) Effect of land surface temperature and moisture changes of Iraq's western desert on the dust storms In Iraq using remote sensing technique. In: Proceeding of The Technology, Education and Science International Conference (TESIC) 2013, 2013.

Rusli, Nursalasawati and Kueh, Ahmad Beng Hong and Kasiman, Erwan Hafizi (2013) The effect of magnetisation and lorentz forces in a two-dimensional biomagnetic channel flow. In: Aip Conference Proceedings.

Mohammad, Nurul Farahain and Mohd. Kasim, Abdul Rahman and Ali, Anati and Shafie, Sharidan (2013) Effect of MHD on unsteady boundary layer flow past a sphere. In: The 3rd annual International Conference Syiah Kuala University (AIC-UNSYIAH) 2013 In Conjunction With The 2nd International Conference on Multidisciplinary Research (ICMR) 2013.

Mat Desa, Mohd Shaiful Zaidi and Hassan, Azman and Arsad, Agus (2013) The effect of natural rubber toughening on mechanical properties of poly(lactic acid)/ multiwalled carbon nanotube nanocomposite. In: Advanced Materials Research (Volume 747).

Kamaruddin, W. H. A. and Kusuma, H. H. and Ibrahim, Z. (2013) Effect of new thermal insulation to the growth of linbo3 single crystal by czochralski method. In: Advanced Materials Research.

Abd. Jalil, Aishah (2013) The effect of Ni On Hy Zeolite and its application for cumene cracking. In: 8th Indonesian Zeolite Seminar ITB Bandung - The Effect of Ni on HY zeolite and its application for Cumene Cracking, 2013.

Leong, S. A. N. and Samin, P. M. and Idris, A. and Azizul, M. A. and Misran, E. (2013) Effect of pao-based g-fe2o3 and surfactant concentration on viscosity characteristic. In: Applied Mechanics And Materials.

Alexandrov, Sergei and Yusof, Mustafa and Ahmad, Mohd Zamani (2013) Effect of plastic anisotropy on the limit load of highly under-matched joints: a conceptual approach to plane strain problems. In: ASEM13 The 2013 World Congress on Advances in Structural Engineering and Mechanics International Convention Center Jeju, Jeju, Korea, 8-12 September, 2013.

Wardoyo, T. T. B. and Izman, S. and Kurniawan, D. (2013) Effect of process parameters on quality of cold spinned tube head. In: Applied Mechanics And Materials.

Idris, Siti Rabiatull Aisha and Ourdjini, Ali and Mohamed Ariff, Azmah Hanim and Osman, Saliza Azlina (2013) Effect of reflow profile on intermetallic compound formation. In: IOP Conference Series: Materials Science and Engineering.

Iqbal, N. and Kadir, M. R. A. and Mahmood, N. H. B. and Moses, M. and Salim, M. B. M. and Malek, N. A. N. N. (2013) Effect of silver ions on the structural and antibacterial properties of bone replacement material. In: Advanced Materials Research.

Suleiman Ahmad, Muhammad Jabir and Abdullah, Ahmad Nizam and Ibrahim, Rosdi and Mohamad, Mazlan and Abu Kasim, Noorhayaty and Abdul Kadir, Mohammed Rafiq and Muhamad, Shamsul and Itoh, Yoshinori and Hanada, Kotaro and Shimizu, Toru (2013) Effect of sintering conditions on mechanical properties and microstructure of titanium alloy produced by metal injection moulding (MIM). In: Advanced Materials Research.

Syahrullail, S. and Yahya, W. J. and Wan Nik, W. B. and Tiong, Chiong Ing (2013) The effect of sliding speed on friction and wear of RBD palm olein. In: 3rd International Conference on Mechanical and Manufacturing Engineering, ICME 2012, 20 November 2012 through 21 November 2012.

Hamzah, Esah and Hastuti, Kurnia and Hashim, Jasmi and Chuah, Chuan Eng and Khattak, Muhammad Adil (2013) Effect of solution annealing and low temperature ageing on the micrestructures and superelastic behaviour of ti-50.at.%ni alloy. In: Advanced Materials Research.

Mohamed Bazin, Maisarah and Ahmat, Muhd. Amirudin and Mohd. Zaidan, Nurhanna and Ismail, Ahmad Fauzi and Ahmad, Norhayati (2013) Effect of starch addition on microstructure and strength of ball clay membrane. In: International conference on membrane science and technology, MST 2013.

Che Yunus , Mohd. Azizi (2013) Effect of surface mercerization and surfactant adsorption on banana trunk fiber to benzene adsorption. In: 4th ICOWOBAS-RAFSS 2013, Johor Bahru, Malaysia, 3-5 September 2013.

Davoudinejad, A. and Noordin, M. Y. and Ghodsiyeh, D. and Ashrafi, S. A. and Barzani, M. M. (2013) Effect of tool wear on tool life and surface finish when machining DF-3 hardened tool steel. In: Applied Mechanics And Materials.

Muhammad, R. and Wahab, Y. and Ibrahim, Zuhairi and Othaman, Zulkafli and Sakrani, S. and Ahamad, R. (2013) The effect of V/III ratio on the crystal structure of gallium arsenide nanowires. In: 4th International Conference on Solid State Science and Technology, ICSSST 2012, 18-20 Dec, 2013, Melaka, Malaysia.

Hamzah, Esah and Mudang, Maureen and Khattak, Muhammad Adil (2013) Effect of variation in microstructures on high temperature creep of Fe-Ni-Cr superalloy. In: The 2013 World Congress on Advances in Structural Engineering and Mechanics (ASEM13) Korea.

Heshmati, A. and Mohammed, H. A. and Parsazadeh, M. and Fathinia, F. and Wahid, M. A. and Sies, M. M. and Saat, A. (2013) Effect of vertical baffle installation on forced convective heat transfer in channel having a backward facing step. In: Applied Mechanics And Materials.

Bahari, A. and Sheriff, J. M. and Osman, K. (2013) The effect of wavy groove liner on pressure distribution of journal bearing. In: Applied Mechanics And Materials.

Saiman, Mohd. Pahmi and Wahab, Mohd. Saidin and Wahit, Mat Uzir (2013) The effect of yarn linear density on mechanical properties of plain woven kenaf reinforced unsaturated polyester composite. In: 4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013, 17-18 Dec, 2013, Kuala Lumpur, Malaysia.

Wan Alwi, Sharifah Rafidah and Peng, Yen Liew and Jeng, Shiun Lim and Klemes, Jiri (2013) An effective framework for total site heat recovery systems retrofit. In: 8th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2013), 2013.

Sunar , Mohd. Shahrizal (2013) Effective marker-based augmented reality scene illumination. In: The 2nd International Conference on Interactive digital Media.

Lee, Yee Ling and Tan, Chersiang and Lee, Yeonghuei and Mohammad, Shahrin and Tahir, Mahmood Md Md and Shek, Poingian (2013) Effective steel area of fully embedded cold-formed steel frame in composite slab system under pure bending. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012, 2 November 2012 through 6 November 2012, Kaohsiung; Taiwan.

Zakaria, Zarabizan and Ismail, Syuhaida and Md Yusof, Aminah (2013) Effectiveness of pavement management system and its effects to the closing of final account in construction project in Malaysia. In: International Conference on Science and Engineering in Mathematics, Chemistry and Physics (ScieTech), JAN 24-25, 2013, Jakarta, Indonesia.

Wan Muhamad, Wan Asilah and Abd. Rahman, Tharek and Jamlos, Mohd. Faizal (2013) The effects of air-gap on Spider Radial Line Slot Array (SRLSA) antenna for point to point application. In: 2013 IEEE Symposium on Wireless Technology & Applications (ISWTA), 2013.

Ahdash, Abdelsalam and Hamzah, Esah and Ourdjini, Ali and Shamsuri, Siti Rahmah (2013) Effects of cathodic protection and coating on the corrosion rate of carbon steel in stagnant and flowing freshwater. In: Advanced Materials Research (Volume 686).

Bagheri, G. and Hamidi, E. and Wahid, M. A. and Saat, A. and Sies, M. M. (2013) Effects of CO2 dilution on the premixed combustion of CH4 in microcombustor. In: Applied Mechanics And Materials.

Abdul Razak, N. C. and Inuwa, I. M. and Hassan, Azman and Samsudin, S. A. (2013) Effects Of compatibilizers on mechanical properties of Pet/Pp blend. In: 8th Asian-Australasian Conference on Composite Materials (ACCM-8), 6-8 Nov 2012, Kuala Lumpur, Malaysia.

Barzani, M. M. and Yusof, N. M. and Farid, A. A. and Farahany, S. and Davoudinejad, A. (2013) Effects of cutting condition on surface roughness when turning untreated and sb-treated al-11%si alloys using pvd coated tools. In: Applied Mechanics And Materials.

Nasaruddin, M. A. and Abdul Hamid, Mohd. Kameil and Mat Lazim, Ahmad Razimi and Abu Bakar, Abd. Rahim (2013) Effects of external hard particles on brake noise of disc braking system. In: Applied Mechanics And Materials.

Abuelnuor, A. A. A. and Wahid, M. A. and Saat, A. and Sies, M. M. and Osman Abdalla, M. and Ehsan Hosseini, S. and Darus, A. N. and Mohammed, H. A. and Dairobi, A. G. (2013) Effects of firing mode on the performance of flameless combustion: a review. In: Applied Mechanics And Materials.

Mohd. Kasim, Abdul Rahman and Lim, Yeou Jiann and Shafie, Sharidan and Ali, Anati (2013) The effects of heat generation or absorption on MHD stagnation point of Jeffrey fluid. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM 21, 6-8 Nov, 2013, Penang, Malaysia.

Ani, Farid Nasir (2013) The effects of injection parameters on the performance and emissions of common rail light duty engine fueled with palm oil biodiesel. In: 4th International Conference on Mechanical and Manufacturing Engineering, 2013.

Abdullah, M. Adlan and Ani, Farid Nasir and Hassan, Masjuki (2013) The effects of injection parameters on the performance of common rail light duty engine fueled with palm oil biodiesel. In: 4th International Conference on Mechanical and Manufacturing Engineering, ICME 2013, 17-18 Dec, 2013, Kuala Lumpur, Malaysia.

Abdul Aziz, Azhar (2013) The effects of maintaining constant engine air intake temperature on its performance and emissions. In: 12th International Conference on Sustainable Energy Technologies (SET-2013) 26-29Th August, 2013 Hong Kong, 2013, Hong Kong.

Teo, Aaron Edward and Pesiridis, Apostolos and Rajoo, Srithar (2013) Effects of mechanical turbo compounding on a turbocharged diesel engine. In: 17th Asia Pacific Automotive Engineering Conference, APAC 2013, 1 April 2013 through 3 April 2013, Bangkok; Thailand.

Nik Malek, Nik Ahmad Nizam (2013) Effects of natural zeolite (CLINOPTILOLITE) with urea on growth of amaranthus gangeticus, clinachantus nutans and capsicum annuum. In: 4th International Conference and Workshops on Basic and Applied Sciences (4th ICOWOBAS) and Regional annual Fundamental Science Symposium 2013 (11th RAFSS), Johor Bahru, Malaysia, 3-5 September 2013.

Mohd. Hashim, Asha Hasnimy and Lee, Ai Choo (2013) The effects of neuromuscular control training on athlete's limit of stability. In: 4th International Graduate Conference on Engineering, Science and Humanities, 22 -23 August 2013, Kuala Lumpur.

Azdarpour, Amin and Rahmani, Omeid and Mohammadian, Erfan and Parak, Mahdi and Mohamad Daud, Ahmad Rafizan and Junin, Radzuan (2013) The effects of polymer and surfactant on polymer enhanced foam stability. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium, 7-9 April 2013, Langkawi, Malaysia.

Ismail, Razali and Saad, Ismail and Hamzah, Zuhir and Seng, Bun and Anuar, Khairul and Ghosh, Bablu and Bolong, Nurmin (2013) Effects of S/D doping concentrations on vertical strained-sige impact ionization MOSFET incorporating dielectric pocket (VESIMOS-DP). In: First International Conference on Artificial Intelligence, Modelling and Simulation (AIMS2013).

Akmal, M. J. N. and Afendi, M. P. M. and Asiah, M. N. and Addawiyah, Z. R. and Faizal, K. N. (2013) Effects of SIO2 and TIO2 nanofillers on conductivity level of LLDPE-NR nanocomposite HV insulator. In: Applied Mechanics And Materials.

Khattak, Muhammad Adil and Tamin, Mohd N (2013) Effects of thermal aging and absorbed hydrogen on fatigue crack growth behavior of welded C-Mn steels. In: 2nd International Conference on Mechanical, Electronics and Mechatronics Engineering (ICMEME'2013), 17th to 18th June 2013, London, United Kingdom.

Yong, T. M. and Hamzah, Esah (2013) Effects of various seeding methods on multi-layered diamond coatings deposited via hot filament chemical vapor deposition. In: 1st International Materials, Industrial and Manufacturing Engineering Conference 2013 (MIMEC2013)Johor Bahru.

Rithwan, Fahim and Zhari, Salman and Che Yunus, Mohd Azizi and Mohd H, Hafiza (2013) Efficacy of biological activity of andrographis paniculata extracted by using supercritical Carbon dioxide (SC-CO2) extraction. In: International Conference on Separation Technology 2013 (ICOST 2013).

Ebrahimi, Sepideh and Ibrahim, Othman and Che Hussin, Ab Razak and Sedera, Darshana (2013) Efficiency of knowledge integration in enterprise systems implementation. In: Proceedings - Pacific Asia Conference on Information Systems, PACIS 2013, 2013.

Ali, Rusmidah and Wan Abdullah, Wan Nazwanie and Wan Abu Bakar, Wan Azelee (2013) Efficient Oxidative Desulfurization (ODS) of commercial diesel with TBHP under mild conditions catalyzed by polymolybdates supported on Al2O3. In: 27th Regional Conference of Solid State Science and Technology, hysics With Electronics Programme, School of Science and Technology, Universiti Malaysia Sabah, Kota Kinabalu, Sabah. 20-22 December 2013, 2013.

Mohamed Yusof , Nor Ashikin (2013) eKadaster : a learning experience for Malaysia. In: FIG Pacific Small island Developing States Symposium.

Ilbeygi, H. and Ismail, Ahmad Fauzi and Nasef, Mohamed Mahmoud and Jaafar, J. and Jalalvandi, E. and Panahi, P. (2013) Electerochemical study of speek/cloisite 15a (r)/tap membrane at moderate temperature for DMFC application. In: Advances In Applied Materials And Electronics Engineering Ii.

Thuku, I. T. and Rahmat, M. F. and Tajdari, T. (2013) Electric charge tomography imaging using finite-element method and pro-rata distribution. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Rahman, Md. Habibur and Ahmad, Mohd. Ridzuan (2013) Electrical characterizations of electrodes microfluidics system for microbio object analysis. In: 2013 IEEE International Conference on Control System, Computing and Engineering.

Ahmad, Arshad (2013) Electrochemical water gas shift reaction of industrial grade hydrogen for PEM fuel cell. In: 2nd Conference on Energy & Process Technology (CONCEPT2013), 2013.

Azaman, Aizreena and Kadri, Nahrizul Adib and Abu Osman, Noor Azuan (2013) Electromagnetic flux modeling of AC field over planar microarray dot electrodes used in dielectrophoretic lab-on-chip device. In: IFMBE Proceedings.

Zainal Abidin, Wardah and Uden, Lorna and Alias, Rose Alinda (2013) Electronic portfolio as a knowledge management tool: a comparative analysis. In: The 8th International Conference on Knowledge Management in Organizations .

Abd. Jalil, Aishah (2013) Electrosynthesis of Zro2-Zno/Hy catalyst for enhanced decolorization of organic dyes: effect of Si-O-Zr And Si-O-Zn bonds. In: 8th Indonesian Zeolite Seminar, 4-­?5 June 2013, Bandung, Indonesia.

Yamin, A. H. and Ibrahim, M. N. and Idroas, M. and Zin, A. R. (2013) Embedded solar tracking instrumentation system. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Mustaffa, Sharif and Nasir, Zaidatul and Aziz, Rashid and Mahmood, Mohd Nasir (2013) Emotional intelligence, skills competency and personal development among counseling teachers. In: 3rd World Conference on Learning, Teaching and Educational Leadership, 2012, Belgium.

Ali Khan , Mohd. Noor Azli (2013) An empirical evidence of Malay Language usage in financial statement. In: 2013 IEEE Symposium on Business, Engineering and Industrial Application (ISBEIA), 2013.

Nikfard, Pourya and Najafabadi, Maryam Khanian and Rouhani, Babak Darvish and Nikpay, Fatemeh and Selamat, Harihodin (2013) An empirical study into model testability. In: International Conference on Informatics and Creative Multimedia 2013 (ICICM'13), 4-6 Sept, 2013, Kuala Lumpur, Malaysia.

Ani , Farid Nasir (2013) Energy analysis on a split-type conditioner using ejector as an expansion device. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material.

Zakaria, R. and Foo, K. S. and Ainee, F. and Majid Abd., M. Z. and Mohamad Zin, R. and Hainin, M. R. and Yaacob, H. and Hamzah, N. and Balubaid, S. O. and Mazlan, A. N. and Ismail, M. A. and Yazid, Y. S. and Haidar, H. and Marwar, N. (2013) Energy consumption and potential retrofitting of rest and service areas (RSAS) in Malaysia case study. In: Applied Mechanics And Materials.

Abd Majid, Muhd Zaimi (2013) Energy efficiency for existing toll plazas. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

Razzaque, Mohammad Abdur and Adnan, Md. Akhtaruzzaman and Abdullah, Abdul Hanan (2013) Energy efficient gas emission monitoring systems using wireless sensor networks. In: The 5th International Conference on Ubiquitous and Future Networks..

Saleem, K. and Fisal, Norsheila (2013) Energy efficient information assured routing based on hybrid optimization algorithm for WSNS. In: Proceedings of the 2013 10th International Conference on Information Technology: New Generations, ITNG 2013.

Kannan, T. Saravana and Ahmed, A. S. and Ani, Farid Nasir (2013) Energy efficient microwave irradiation of sago bark waste (SBW) for bioethanol production. In: Advanced Materials Research (Volume 701).

Aris, Azmi (2013) Enhancement of hydroxyl radical formation in hydrodynamic cavitation using multiple orifice plates. In: International Conference on Innovation Challenges in Multidisciplinary Research & Practice (ICMRP),.

Annuar, Hairil and Shanmugam, Bharanidharan and Ahmad, Azuan and Idris, Norbik Bashah and Hasan AlBakri, Sameer and Narayana Sami, Ganthan (2013) Enhancement of network access control architecture with virtualization. In: 2013 International Conference on Informatics and Creative Multimedia.

Abdullah Saleh, Mubarak and A. Mohammed, Salam and C. Abdullah, Ezzat and A. Hashim, Laith (2013) Enhancement the dissolution rate and solubility of poorly soluble drugs: review. In: Advanced Materials Research Vol. 701 (2013).

Abdul Samat, Norhanim (2013) Enhancing learning through literature circles in a university classroom. In: International Conference On Learning And Teaching 2013, 28-29 June 2013 , 2013.

Abdul Latif, Adibah and Abdul Ghafar, Mohamed Najib and Libunao, Wilfredo Herrera and Mohd. Amin, Norfadila and Peter, Crystal Joan (2013) Enhancing students akhlaq behaviour through holistic assessment. In: Proceeding of the International Conference on Social Science Research, ICSSR 2013.

Aris, Baharuddin and Samian, Yahya and Ahmad, Maizah Hura and Abdullah, Zaleha and Mohamed Rashid, Mohamad Yusoff (2013) Enriching 21st century higher education students’ job creation skill : UTM academic staff perceptions toward MIT BLOSSOMS. In: The Sixth Conference of MIT's Learning International Networks Consortium (LINC), 16th-19th June 2013, MIT, Cambridge, Massachusetts USA.

Saqr, K. M. and Wahid, M. A. (2013) Entropy generation in turbulent swirl-stabilized flame: effect of hydrogen enrichment. In: Applied Mechanics And Materials.

Hosseini, S. E. and Wahid, M. A. and Salehirad, S. (2013) Environmental protection and fuel consumption reduction by flameless combustion technology: a review. In: Applied Mechanics And Materials.

Farzamnia, Ali and Yusof, S.K.S and Fisal, Norsheila and Lahiji, Mohammadreza Askaripour and Maqbool, Wajahat (2013) Error concealment using joint multiple description lioyd-max quantization and network coding. In: 2013 10TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING/ELECTRONICS, COMPUTER, TELECOMMUNICATIONS AND INFORMATION TECHNOLOGY (ECTI-CON), 15-17 May 2013, Krabi, Thailand.

Abd Majid, Muhd Zaimi (2013) Establishment of criteria for design and construction activities of green highway development. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

S.I.M, Aseham and Abdul Rahman, Muhammad Zulkarnain and Ab Wahid, Rasib and A., Ariffin (2013) Estimation of composite hydrodynamic roughness overland in tropical environment using airbone LiDAR: a case study in Hutan Rekreasi Ayer Keroh Melaka. In: Seminar on Advanced Active Remote Sensing (SAARS 2013), 2013, UTM Kuala Lumpur.

Ahmad, Arshad (2013) Estimation of energy losses from a laboratory spray drier: a computational approach. In: 2nd Conference on Emerging Energy & Process Technology 2013 (CONCEPT 2013), 9-10 Dec 2013, 2013, Desaru.

Mohamad Aseham, Siti Idayu and Abd. Rahman, Muhammad Zulkarnain and Rasib, Abd. Wahid and Ariffin, Azman (2013) Estimation of hydrodynamic roughness over land in tropical environment using lidar data:a case study in Ayer Keroh, Melaka. In: 34th Asian Conference on Remote Sensing 2013 Bridging Sustainable Asia, Bali, Indonesia, October 20-24, 2013.

Alel, Mohd. Nur Asmawisham and Ramly, N. and Ghafar, M. and Adnan, A. (2013) Estimation of life casualties for seismic vulnerability assessment in Bukit Tinggi, Pahang, Malaysia. In: Conference Geotropika & Icon Build 2013 (GEOCON2013) - Paper 2, 2013.

Abdul Latip, Fatehah and Abdul Rahman, Muhammad Zulkarnain and Wan Kadir, Wan Hazli and Amerudin, Shahabuddin and Ibrahim, Ab. Latif (2013) Estimation of timber volume in tropical rainforest using airborne LiDAR. In: Seminar on Advanced Active Remote Sensing (SAARS 2013).

Abdul Latiff, Zulkarnain (2013) Evaluation of a compression ignition engine performance, emission and in-cylinder characteristics using Water In Diesel Emulsion (WIDE) Fuel For S.I.T Schiffs & Industry Technic (M) Sdn. Bhd. In: n/a, 2013.

Hafsa, M. N. and Ibrahim, M. and Sharif, S. and Omar, M. F. M. and Zainol, M. A. (2013) Evaluation of different internal structure and build orientation for multijet modeling process. In: Applied Mechanics And Materials.

Abd. Jalil, Aishah (2013) Evaluation of linear alkane hydroisomerization of c5–c7 over moo3–zro2 and pt/moo3–zro2 catalysts. In: The 3rd ITB Catalysis Symposium, Institut Teknologi Bandung : 3-4th September 2013.

Hosseini, S. E. and Wahid, M. A. and Salehirad, S. and Seis, M. M. (2013) Evaluation of palm oil combustion characteristics by using the chemical equilibrium with application (CEA) software. In: Applied Mechanics And Materials.

Hassan, M. F. and Saman, M. Z. M. and Sharif, S. and Omar, B. (2013) Evaluation of sustainability performance of product design element concepts using analytic hierarchy process. In: Applied Mechanics And Materials.

Zakaria, Z. and Balkhis, I. and Yaacob, S. and Mansor, M. S. B. and Rahim, R. A. and Rahim, H. A. (2013) Evaluation on the sensitivity of tri-coil sensor jig for 3D image reconstruction in magnetic induction tomography. In: Proceedings - UKSim 15th International Conference on Computer Modelling and Simulation, UKSim 2013.

Taherdoost, Hamed and Sahibuddin, Shamsul and Ibrahim, Suhaimi and Kalantari, Alaeddin and Jalaliyoon, Neda and Ameri, Sadegh (2013) Examination of electronic service definitions. In: Proceedings - 2012 International Conference On Advanced Computer Science Applications And Technologies, ACSAT 2012, 26-28 Nov. 2012, Kuala Lumpur.

Omidinia, Siavash and Masrom, Maslin and Selamat, Harihodin (2013) An examination of the concept of smart school: an innovation to address sustainability. In: Proceedings Of The 2nd International Conference On Advances In Computer Science And Engineering (CSE 2013).

Ariffin, Arman and Abdullah, Hayati and Hassan, Mohammad Yusri (2013) Exhaust gas-superstructure interactions onboard ships with side exhaust. In: Encon 2013, 6th Engineering Conference, "Energy and Environment".

Suherman, A. and Abd. Rahman, Muhammad Zulkarnain and Busu, Ibrahim (2013) Expectation for the presence of hydrocarbon seepage in onshore tropical region, case study in Miri Sarawak Malaysia. In: 34th Asian Conference on Remote Sensing 2013 Bridging Sustainable Asia, Bali, Indonesia, October 20-24, 2013.

Haryono, Aries Prih and Sukamto, Edi and Sumeru, Sumeru and Ani, Farid Nasir (2013) Experimenal investigation on the use of secondary refrigerant in freezer for energy savings. In: 1st International Conference on Mechanical Engineering.

Abu Husain, Nurul Akmar and Loog, P. C. (2013) Experimental analysis of bending and axial crush behaviour of single hat longitudinal rail. In: Key Engineering Materials.

Abu Husain, Nurulakmar and Chi, Loog Pang and Abdullah, Mohamed Ruslan and Abu Bakar, M. A. (2013) Experimental analysis of bending and tensile behaviour of aluminium-based fibre metal laminates. In: 9th International Conference on Fracture & Strength of Solids.

Abdul Ghani, M. P. and Yaakob, O. and Ismail, N. and Kader, A. S. A. and Ahmad Sabki, A. F. and Singaraveloo, P. (2013) Experimental analysis of podded propulsor on naval vessel. In: Marine Navigation And Safety Of Sea Transportation: Maritime Transport And Shipping.

Nik Mohamed, Nik Abdullah and M. Idrus, Sevia and Mohammad, Abu Bakar and Yaakob, S. and Md. Yusoff, Nelidya and Ahmad, Norulhusna and Mohd. Sam, Suriani (2013) Experimental demonstration of a downlink remote optical local oscillator forradio over fiber system. In: 4th International Conference on Photonics (ICP 2013).

Abdul Wahid , Mazlan (2013) Experimental investigation of flameless combustion in a laboratory scale apparatus. In: 12th Asian International Conference On Fluid Machinery (12th AICFM, 2013), 25th-27th September 2013, 2013, Hotel Santika Premiere Yogyakarta,Indonesia.

Shek, Poingian and Tahir, Mahmood Md Md and Tan, Chersiang and Sulaiman, Arizu (2013) Experimental investigation of retrofitted extended end-plate connections. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012, 2-6 November 2012, Kaohsiung; Taiwan.

Yahya, Wira Jazair and M.I, Izhan and Abdul Kadir, Mohammed Rafiq and Samion, Syahrullail (2013) Experimental study on the effect of different speeds applied with palm olein using pin-on-disk teste. In: Applied Mechanics And Materials.

Soh, T. L. G. and Said, D. M. and Ahmad, N. and Nor, K. M. and Salim, F. (2013) Experimental study on the impact of harmonics on transformer. In: IEEE 7th International Power Engineering and Optimization Conference (PEOCO), 2013, 3rd-4th June 2013, Langkawi, Malaysia.

Abdul Latiff, Zulkarnain and Soon, Cheong Weng and Supriyo, Bambang and Mohd. Perang, Mohd. Rozi and Nasution, Henry and Abdul Aziz, Azhar (2013) Experimental study on the performance of in-cabin ventilation system. In: International Conference On Mechanical Engineering ICOME 2013, 2013.

Perang, M. R. M. and Nasution, H. and Abdul Latiff, Z. and Aziz, A. A. and Dahlan, A. A. (2013) Experimental study on the replacement of HFC-R134A by hydrocarbons in automotive air conditioning system. In: Applied Mechanics And Materials.

Mad Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Syed Abdul Hamid, Syed Hassan and Zakuan, Norhayati (2013) Exploratory analysis of ergonomics importance at workplace and safety culture amongst occupational safety and health practitioners. In: IAENG Transactions on Engineering Technologies.

Mat Zaib, N. A. and Bazin, N. E. N. and Mustaffa, N. H. (2013) Exploratory study on the effect of discount pricing strategies for new product introduction. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Shamsudin, S. and Husin, N. and Abd. Manan, A. (2013) Exploring fundamental engineering word list for engineering students: a literature review. In: Akdeniz Language Studies Conference.

Abdul Kohar, Umar Haiyat (2013) Exploring the role of university towards the sustainability of Malaysian Bumiputera (Indigenous) technology-based firms. In: Proceedings - Asia Pacific Marketing and Management Conference (APMMC2013).

Nawi, A. A. B. and Mohd. Ali, N. M. and Sarmin, N. H. (2013) The exterior degree of symmetric group of order six. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, Pts A And B.

Abu Mansur, Nur Naha (2013) External environment as predicator of Return on Investment (ROI) adoption within SMEs in Malaysia. In: Conference of Management Entrepreneurship and Technology (COMET 2013).

Ahmad, Norhayati and Mohd. Zaidan, N. B. and Mohd. Bazin, M. (2013) Fabrication and characterization of ceramic membrane by gel cast technique for water filtration. In: Green Technologies For Sustainable & Innovation In Materials.

Adam, T. and Hashim, U. and Leow, P. L. and D., Q. H. (2013) Fabrication of nanowire using ash trimming technique. In: Advanced Materials Research.

Abdolahi, Ahmad and Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2013) Facile synthesis of polyaniline-silver composites through interfacial polymerization. In: 8th International Materials Technology Conference and Exhibition, IMTCE 2012, 9th-12th July 2012, Petaling Jaya, Malaysia.

Nor, K. M. and Fazni Wan Mohamad Nazarie, W. N. and Md. Yusoff, A. A. A. (2013) Factors influencing individuals' trust in online purchase through social networking sites. In: 2013 7th Intenational Conference on e-Commerce in Developing Countries: With Focus on e-Security, ECDC 2013.

Ilias, Mohd. Faeez and Ismail, Muhamad Faiz and Jasmi, Kamarul Azmi (2013) Faktor Dorongan dan Halangan Penggunaan Bahan Bantu Mengajar oleh Guru Pendidikan Islam di Sekolah Bestari (Motivation Factors and Obstacles use of teaching aids by the Islamic Education Teacher in Smart School). In: 3rd International Conference on Islamic Education 2013 [ICIED2013]), 6th - 7th April 2013, EPF Institute, Kajang, Selangor, Malaysia.

Abd. Rahman, Suhaimi (2013) Faktor sosial dalam pembentukan akhlak pelajar sekolah menengah. In: Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13], 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization.

Abd. Hamid, Mohd Azhar (2013) Falsafah Politik Melayu. In: Simposium Antarabangsa Falsafah Islam 2013, 2013.

Onn, Irwan Herman and Ahmad, Norhayati and Tamin, Mohd. Nasir (2013) Fatigue characteristics of dual phase steel sheets. In: 9th International conference on fracture & strength of solids.

Ahmad, Arshad (2013) Fault detection and diagnosis for pilot heat exchanger pilot plant system using multiflow modeling. In: 2nd Conference on Emerging Energy and Process Technology (CONCEPT2013), 2013.

Mirin, S. N. S. and Wahab, N. A. (2013) Fault detection and monitoring using multiscale PCA. In: Proceedings - 2013 IEEE 4th Control and System Graduate Research Colloquium, ICSGRC 2013.

Ismail, Z. H. and Faudzi, A. M. and Dunnigan, M. W. (2013) A fault-tolerant control scheme for a hovering underwater vehicle subject to region function formulation. In: 2013 9th Asian Control Conference, ASCC 2013.

Dairobi, A. G. and Wahid, M. A. and Inuwa, I. M. (2013) Feasibility study of pulse detonation engine fueled by biogas. In: Applied Mechanics And Materials.

Fadaee Nejad, M. and Shariati, O. and Mohd. Zin, A. A. B. (2013) Feasibility study of wave energy potential in southern coasts of Caspian Sea in Iran. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Wong, S. and Ooi, C. Y. and Hau, Y. W. and Marsono, M. N. and Shaikh-Husin, N. (2013) Feasible transition path generation for EFSM-based system testing. In: Proceedings - IEEE International Symposium on Circuits and Systems.

Pournamdari, M. and Hashim, Mazlan (2013) Feature level fusion for enhanced geological mapping of ophiolile complex using aster and landsat TM data. In: 8th International Symposium on Digital Earth, 2013.

Abd Rahman , Nor Sa'adah (2013) Feed In Tariff(FIT) for renewable energy: a review towards fit implementation in Malaysia. In: 1st International Conference on new directions in business, management, finance and economics.

Ahmad Bakir, A. and Ahmad, Z. A. and Mohamed, M. and Hassan, M. N. H. and Ahmad, M. I. (2013) Feed rate influence on motion error characteristics of CNC vertical milling machine. In: Applied Mechanics And Materials.

Jonit, S. S. and Aziz, M. and Sundari, R. (2013) Fesem-edx and CV characteristics of dopant (mn, co, ni) magnesium ferrites. In: Advanced Materials Research.

Askari, Muhamad (2013) Field evaluation of infiltration models under oil palm plantation: stemflow and throughfall areas. In: Proceeding of International Conference on Sustainable Rural Development 2013, August 25-26, 2013, Purwokerto, Central Java, Indonesia, .

Tan, Yin Peen and Arshad, Mohammad Yusof (2013) FILA-MMS charts in chemistry PBL lesson : a case study of its implementation during problem analysis. In: 4th International Symposium on Problem Based Learning (IRSPBL 2013), 2rd-3th July 2013, Kuala Lumpur, Malaysia.

Ahmed Abdel Razak, Yasser Mohamed (2013) Fin stabilizer effect on resistance of semi-swath. In: IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA2013).

Davoudi, Mohammad Mahdi and Öchsner, Andreas (2013) Finite difference approximations of elasto-plastic bending problems: layered approach and error estimates. In: 6th International Conference on Advanced Computational Engineering and Experimenting, ACE-X 2012, 1 July - 4 July 2012, Istanbul; Turkey.

Yob, Mohdshukri and Mansor, Shuhaimi Shuhaimi and Sulaiman, Razali (2013) Finite element modelling to predict equivalent stiffness of 3D space frame structural joint using circular beam element. In: 2013 International Conference on Mechanical Engineering, Industrial Materials and Industrial Electronics, MII 2013, 1 September 2013 through 2 September 2013, Hong Kong; China.

Hamzah, Naemah and Mustari, Mohd. Ismail and Basiron, Bushrah (2013) Fiqh sains rumah tangga dan kerjaya wanita cemerlang dalam sektor awam di Malaysia. In: Pasca Siswazah Fakulti Tamadun Islam Kali Kedua 2013, 18-19 Disember 2013, Main Hall, Faculty of Islamic Civilization.

Johari, Nur Farahlina and Mohd Zain, Azlan and Mustaffa, Noorfa Haszlinna and Udin, Amirmudin (2013) Firefly algorithm for optimization problem. In: Applied Mechanics and Materials Vol. 421 (2013).

Alias, Noraliani (2013) First flush analysis in urban catchments. In: 16th International Conference on diffuse Pollution and Eutrophication.

Abdi, Behzad and Azwan, S. and Abdullah, Mohamed Ruslan and Ayob, Amran (2013) Flexural and tensile behavior of kenaf fibre composite materials. In: International Conference on the Science and Engineering of Materials (ICoSEM 2013).

Saggaff, A. and Tahir, M. M. and Shek, P. N. (2013) Flexural behavior of steel reinforced brick beam utilizing interlocking brick system. In: Advanced Materials Research.

Tam, Tze Huey and Ibrahim, Ab. Latif and Abd. Rahman, Muhammad Zulkarnain and Mazura, Z. (2013) Flood loss assessment in the Kota Tinggi. In: 8th International Symposium on digital Earth 2013, Kuching, Sarawak 26-29 August, 2013.

Tam, Tze Huey and Ibrahim, Ab. Latif and Abd. Rahman, Muhammad Zulkarnain and Zulkifli, Mazura (2013) Flood risk mapping using geospatial techniques and hydraulic model. In: 34th Asian Conference on Remote Sensing, Bali, Indonesia, 20-24 October 2013.

Abdul Latif, Ainullotfi (2013) Flutter of composite wing by finite element analysis. In: 2nd International Conference on Mechanical, Automotive and Aerospace Engineering (ICMAAE 2013) 2-4 July 2013, Kuala Lumpur.

Shamsudin, S. and Karim, H. R. (2013) Focus on form in an EFL context: learners' uptake. In: Akdeniz Language Studies Conference.

Sy Ahmad Ubaidillah, S. H. and Sallehuddin, R. (2013) Forecasting zakat collection using artificial neural network. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Sarker, M. L. R. and Nichol, J. (2013) Forest biomass estimation from the fusion of C-band SAR and optical data using wavelet transform. In: Proceedings of SPIE - The International Society for Optical Engineering.

Bidin, Noriah and Al-Wafi, Yusef A. (2013) The formation of iron aluminides on aluminum surface by using a Q-switched Nd:YAG laser. In: 4th International Meeting on Frontiers in Physics, IMFP 2013, 27-30 August, 2013, Kuala Lumpur, Malaysia.

Ramdan, R. D. and Djuansjah, J. R. P. and Kadir, M. R. A. and Nur, H. and Hamzah, E. (2013) Formation of titanium oxide by thermal-electrochemical process on the blasted titanium alloys substrate. In: Advanced Materials Research.

Abdul Rahim , Ruzairi (2013) FPGA’s review on optical tomography system. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM2013).

Masood, Ibrahim and Hassan, Adnan (2013) A framework for multivariate process monitoring and diagnosis. In: Applied Mechanics And Materials.

Viswanathan, K. K. and Javed, S. and Aziz, Z. A. (2013) Free vibration of antisymmetric angle-ply laminated annular circular plate. In: Lecture Notes In Engineering And Computer Science.

Sarip, A. R. and Musa, M. N. (2013) Friction analysis on vane of an existing and of a novel multi vane rotary compressor. In: Applied Mechanics And Materials.

Syahrullail, S. and Yahya, W. J. and Wan Nik, W. B. and Fawwaz, W. N. (2013) Friction characteristics of RBD palm olein using four-ball tribotester. In: 3rd International Conference on Mechanical and Manufacturing Engineering, ICME 2012, 20 November 2012 through 21 November 2012.

Ani , Farid Nasir (2013) Fuel ethanol production from sago waste using microwave assisted thermo-chemical hydrolysis. In: World Hybrid Technologies and Energy Conference (WorldHybrid).

Ismail, I. and Mazlan, S. A. and Aqida, S. N. and Olabi, A. G. (2013) Full factorial design to study material parameters of magnetorheological fluid. In: Key Engineering Materials.

Davide, Lo Presti and Abdul Hassan, Norhidayah and Airey, Gordon D. and Collop, Andrew (2013) Fundamental characterisation of reclaimed asphalts: the importance of testing homogeneous specimens. In: European Asphalt Technology Association Conference.

Mohd. Affendi, I. and Rozana, Z. and Sani, B. A. and Foo, K. S. and Ain Naadia, M. and Yazlin Salfiza, Y. and Rosli, M. Z. and Mushairry, M. and Hasrul Haidar, I. and Norhaliza, H. and Nurfatimah, M. and Muhd. Zaimi, A. M. (2013) Fundamental elements of Malaysia green highway. In: Applied Mechanics And Materials.

Abd Majid, Muhd. Zaimi (2013) Future building performance factors in regional development for energy efficieint travel plan. In: Asia Future Conference 2013 (AFC13), 2013.

Maan, Normah and Barzinji, K. and Aris, N. (2013) Fuzzy delay differential equation in predator-prey interaction: analysis on stability of steady state. In: Lecture Notes In Engineering And Computer Science.

Maan, Normah and Barzinji, Khabat and Aris, Nor’aini (2013) Fuzzy delay differential equation in predator-prey intteraction: analysis of stability of steady state. In: Proceedings of the World Congress on Engineering 2013, 3-5 July 2013, London, UK.

Shaharuddin, N. M. R. and Mat Darus, I. Z. (2013) Fuzzy-pid control of transverse vibrating pipe due to vortex induced vibration. In: UKSIM-AMSS 15th International Conference On Computer Modelling And Simulation (UKSIM 2013).

Hamzah, Norhazimi and Md Sam, Yahaya and Selamat, Hazlina and Aripin, M. Khairi (2013) GA-based sliding mode controller for yaw stability improvement. In: 2013 9th Asian Control Conference, ASCC 2013.

Siow, Chee Loon and Jaswar, Koto and Abyn, Hassan and Abdul Malik, Adi Maimun (2013) Gap distance analysis of floating structures in tandem arrangement. In: Developments in Maritime Transportation andExploitation of Sea Resources (IMAM 2013), 2013.

Nyakuma, Bemgba Bevan and Mazangi, Mojtaba and Tuan Abdullah, Tuan Amran and Johari, Anwar and Ahmad, Arshad and Oladokun, Olagoke (2013) Gasification of empty fruit bunch briquette in a fixed bed tubular reactor for hydrogen production. In: 3rd international Conference and Exhibition on Sustainable Energy and Advanced Material(ICE-SEAM 2013),30-31 Oct 2013, 2013, Melaka, Malaysia.

Sulaiman, Zaharuzzaman and Jasmi, Kamarul Azmi (2013) Gaya Pembelajaran dan Hubungannya dengan Motivasi Pelajar: Satu Kajian Tinjauan di Pusat Pendidikan Andalus Peringkat Menengah di Singapura (Learning Style and Its Relation to Student Motivation: A Review of Research in Secondary Level School of Andalus Education Centre in Singapore). In: Seminar Pasca Siswazah Pertama. Fakulti Tamadun Islam, 26 Jun 2013, Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Awang, Siti Rahmah (2013) Gender differences in multiple intelligences among industrial and organizational psychology undergraduates. In: National Psychology Seminar 2013, 2013.

Abd. Manaf, F. N. and Sarmin, N. H. and Mohd. Ali, N. M. and Erfanian, A. and Ghouchan, M. F. D. (2013) A general case of the commutativity degree of nilpotent p-groups of class two. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Baig, Siddique Ullah and Abdul Rahman, Alias (2013) Generalization and visualization of 3D building models in citygml. In: Lecture Notes In Geoinformation And Cartography.

Hashemi, Nourooz and Abu, Mohd. Salleh and Kashef, Hamidreza and Rahimi, Khadijeh (2013) Generalization in the learning of mathematics. In: The 2nd International Seminar on Quality and Affordable Education a Paper accepted to present at ISQAE2013.

Masri, Rohaidah and Mat Hassim, Hazzirah Izzati and Sarmin, Nor Haniza and Mohd. Ali, Nor Muhainiah and Mohd. Idrus, Nor'ashiqin (2013) The generalization of the exterior square of a Bieberbach group. In: 3rd International Conference on Mathematical Sciences, ICMS 2013, 17-19 Dec, 2013, Kuala Lumpur, Malaysia.

Gan, Yee Siang and Fong, Wan Heng and Sarmin, Nor Haniza and Turaev, Sherzod (2013) The generative power of weighted one-sided and regular sticker systems. In: 3rd International Conference on Mathematical Sciences, ICMS 2013, 17-19 Dec, 2013, Kuala Lumpur, Malaysia.

Tahar, Khairul Nizam and Ahmad, Anuar and Wan Mohd. Akib, Wan Abdul Aziz and Wan Mohd., Wan Mohd. Naim (2013) A generic approach for photogrammetric survey using six rotor unmanned aerial vehicle. In: 8th International Symposium on Digital Earth , 2013.

Marghany, Maged Mahmoud (2013) Genetic algorithm for oil spill automatic detection from envisat satellite data. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Md Lazin, M. N. and Mat Darus, I. Z. and Ng, B. C. and Kamar, H. M. (2013) Genetic algorithm identification for automotive air-conditioning system. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Ling, F. N. L. and Kassim, K. A. and Karim, A. T. A. and Tiong, K. and Tan, C. K. (2013) Geochemistry properties of southern Malaysian organic soil. In: Applied Mechanics And Materials.

Agos, M. F. and Muhamad, N. A. (2013) GIS surface assessment by image processing particle detector. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Zainal, Nurezayana and Mohd Zain, Azlan and MohamedRadzi, Nor Haizan and Udin, Amirmudin (2013) Glowworm swarm optimization (GSO) algorithm for optimization problems: a state-of-the-art review. In: Applied Mechanics And Materials.

Assadian, M. and Idris, M. H. and Shahri, S. M. G. and Gholampour, B. (2013) Gold recovery from weee by chlorine system. In: Applied Mechanics And Materials.

Ahamad, Rahmalan (2013) Graphite reinforcement carbon electrode modified with exfoliated graphene oxide for detection of lead (II) ions. In: 4th International Conference & Workshop on Basic and Applied Sciences and 11th Regional annual Fundamental Science Symposium 2013.

Abdul Rahim, Rabiah Eladwiah and Abdul Rahman, Azizah (2013) Green IT capability and sustainable development. In: Proceeding of the the First international Conference on Green Computing, Technology and innovation, 2013.

Ab. Halim, Ahmad Zamani and Ali, Rusmidah and Wan Abu Bakar, Wan Azelee (2013) Green technology purification of natural gas via Co2/H2 methanation by using trimetallic Ru/Mn/Fe-Al2O3 oxide catalyst. In: 27th Regional Conference of Solid State Science and Technology, hysics With Electronics Programme, School of Science and Technology, Universiti Malaysia Sabah, Kota Kinabalu, Sabah. 20-22 December 2013., 2013.

Alwee, Razana (2013) Grey relational analysis and particle swarm optimization support vector regression for crime rates forecasting with economic indicators. In: N/A, 2013.

A. Latiff, Muhammad Shafie and Bashir, Mohammed Bakri and Coulibaly, Yahaya (2013) Grid-based information retrieval architecture for Quran tafseer sources. In: Nooric 2013: Taibah University International Conference on Advances In Information Technology For The Holy Quran and Its Sciences..

Peter, Thomas and Cheung, Sing Wai and Abdul Rahim, Sharul Kamal and Tharek, A.R. (2013) A grounded CPW transparent UWB antenna for UHF and microwave frequency application. In: Progress In Electromagnetics Research Symposium.

Awang, Ramli (2013) Haji dan Lebai dari perspektif Tuan Guru Syeikh Abdul Qadir al-Mandili al-Indonesi (1910-1965). In: Seminar Haji, 2013.

Masroom, Mohd. Nasir (2013) Hakikat kejadian manusia dan kaitannya dengan kesihatan jiwa. In: 3rd International Conference on Islamic Education 2013, 2013, Selangor, Malaysia.

A.L, Amoo and Said, D. M. and Yusuf, A. and Mohd. Zin, A. A. (2013) Harmonic power flow in Nigerian power system with PV site. In: IEEE 7th International Power Engineering and Optimization Conference, (PEOCO) 2013, 3rd-4th June 2013, Langkawi, Malaysia.

Wong, Kuan Yew and Khakdaman, Masoud and Zeinahvazi, Milad and Zohoori, Bahareh and Nasiri, Fardokht (2013) Healthcare system simulation using witness. In: IC-MSQUARE 2012: International Conference On Mathematical Modelling In Physical Sciences.

Sulaiman, H. and Said, N. M. and Ibrahim, A. and Alias, N. (2013) High performance visualization of human tumor detection using wtmm on parallel computing system. In: Proceedings - 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, CSPA 2013.

Hamzah, Esah and Mudang, Maureen and Ang, Khwang Jenq and Khattak, Muhammad Adil (2013) High temperature creep behavior of austenitic fe-ni-cr alloy. In: Advanced Materials Research (Volume 686).

Arora, Vijay K. and Tan, Michael L. P (2013) High-field transport in graphene and carbon nanotubes. In: IEEE International Conference of Electron Devices and Solid-State Circuits (EDSSC), JUN 03-05, 2013, Hong Kong, PEOPLES R CHINA.

Rui, Sih Lim and Ahmad, Rohanin and Yeak, Su Hoe (2013) History tracting ability of second and fourth orders runge-kutta in solving delay differential equations. In: The 4Th International Graduate Conference On Engineering Science & Humanity 2013 (IGCSEH 2013), 2013.

Mat Hassim, Hazzirah Izzati and Sarmin, Nor Haniza and Mohd. Ali, Nor Muhainiah and Masri, Rohaidah and Mohd. Idrus, Nor'ashiqin (2013) The homological functor of a Bieberbach group with a cyclic point group of order two. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM 21, 6-8 Nov, 2013, Penang, Malaysia.

Baharin, Kyairul Azmi and Abd. Rahman, Hasimah and Hassan, Mohammad Yusri and Gan, Chin Kim (2013) Hourly irradiance forecasting for Peninsular Malaysia using dynamic neural network with preprocessed data. In: 2013 IEEE Student Conference on Research and Development (SCOReD).

Nawawi, Noor Fadhlina and Jasmi, Kamarul Azmi (2013) Hubungan antara Pengajaran dan Pembelajaran (P&P), Keperibadian serta Kemahiran Guru Pendidikan Islam dengan Motivasi Pelajar (The relationship between teaching and learning, personality, and skills between Islamic Education Teacher and Student Motivation). In: Seminar Pasca Siswazah Pertama. Fakulti Tamadun Islam, 26 June 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Sahabudin, Noor Azida and Ali, Mohamad Bilal (2013) Hubungan antara skor pembelajaran aturan kendiri dengan kebolehan menyelesaikan masalah dalam Mata pelajaran Matematik. In: 2nd International Seminar On Quality And Affordable Education (ISQAE 2013), 2013.

Yong, C. Y. and Sudirman, R. and Mahmood, N. H. and Chew, K. M. (2013) Human body and body part movement analysis using gyroscope, accelerometer and compass. In: Applied Mechanics And Materials.

Chew, K. M. and Sudirman, R. and Seman, N. and Yong, C. Y. (2013) Human brain phantom modeling: concentration and temperature effects on relative permittivity. In: Advanced Materials Research.

Rashid, M. and Abu-Bakar, S. A. R. and Mokji, M. (2013) Human emotion recognition from videos using spatio-temporal and audio features. In: Visual Computer.

Yong, C. Y. and Sudirman, R. and Mahmood, N. H. and Chew, K. M. (2013) Human hand movement analysis using principle component analysis classifier. In: Applied Mechanics And Materials.

Khair, R. M. and Faizal, K. N. and Asiah, M. N. (2013) Hvdc switching using microprocessor for polarization and depolarization measurement. In: Applied Mechanics And Materials.

AL-Samman, Ahmed M and Abd Rahman, Tharek and Chude-Okonkwo, Uche A. K and Ngah, Razali (2013) Hybrid channel estimation for LTE downlink. In: IEEE 9th International Colloquium on Signal Processing and its Applications (CSPA), MAR 08-10, 2013, Kuala Lumpur, Malaysia.

Isa, Nadira Mohamed and Shabri, Ani (2013) A hybrid group method of data handling with discrete wavelet transform for GDP forecasting. In: International Conference on Mathematical Sciences and Statistics 2013, ICMSS 2013, 5 - 7 February 2013, Kuala Lumpur; Malaysia.

Abdalla, M. E. and Idrus, S. M. and Mohammad, A. B. (2013) Hybrid TDM-WDM 10g-pon for high scalability next generation PON. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Razzaque, M. A. and Fauzi, I. and Adnan, A. (2013) Hybrid-learning based data gathering in wireless sensor networks. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2013) Hydraulic fracturing candidate-well selection by interval type-2 fuzzy set and system. In: International Petroleum Technology Conference 2013: Challenging Technology and Economic Limits to Meet the Global Energy Demand, IPTC 2013, 2013, Beijing, China.

Abd. Jalil, Aishah (2013) Hydrogen molecule-originated protonic acid sites in Pt/Zn-Hbea and evaluation on N-pentane isomerization. In: 8th Indonesian Zeolite Seminar, 4-­?5 June 2013, Bandung, Indonesia.

Tuan Abdullah, Tuan Amran and Nabgan, Walid and Kamaruddin, Mohd. Johari and Mat, Ramli and Johari, Anwar and Ahmad, Arshad (2013) Hydrogen Production from catalytic acetic acid steam reforming over bimetallic Ni-Co on La2O3 Catalyst- Effect of Catalyst dilution. In: int. Conf. of Mechanical Engineering, Lombok, 12-14 Sept 2013., 2013.

Enegbuma, Wallace Imoudu and Ali, Kherun Nita (2013) Hypothesis analysis of building information modelling penetration in Malaysian Construction Industry. In: Proceedings of the CIB World Building Congress 2013, 2013.

Ishak, Irny Suzila and Alias, Rose Alinda and Ishak, Izwan Suhadak and Suradi, Zurinah (2013) ICT innovation strategy in Malaysia public research institutes. In: International Conference on Information Technology and Business Application.

Amat Senin , Aslan (2013) An ideal business incubation model in Nigeria: lessons for other developing economies. In: 13th international (symposium) Conference on Business innovation and Technology Management, 2013.

Sunar, N. H. and Rahmat, Mohd. Fadli and Mohd. Faudzi, Ahmad'Athif and Ismail, Z. H. and Sy Salim, Sy Najib (2013) Identification and self-tuning control of electro-pneumatic actuator system with control valve. In: 2013 IEEE 3rd International Conference on System Engineering and Technology, 19-20 Aug. 2013, Shah Alam, Malaysia.

Nojumuddin, Nur Syereena and Yusof, Fadhilah and Yusop, Zulkifli (2013) Identification of rainfall patterns in Johor. In: Land And Water Conference 2013 , 2013.

Salleh, A. H. M. and Mohamad, M. S. and Deris, S. and Illias, R. Md. (2013) Identifying minimal genomes and essential genes in metabolic model using flux balance analysis. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Masroom, Mohd. Nasir and Muhammad, Siti Norlina and Panatik @ Abd. Rahman, Siti Aisyah (2013) Iman, Islam dan ihsan: kaitannya dengan kesihatan jiwa. In: Seminar Pendidikan & Penyelidikan Islam (SePPIM13), 2013, Johor Bahru, Malaysia.

A. Shukor, Khairunnisa and Jasmi, Kamarul Azmi and Safar, Ajmain (2013) Impact of Akhlaq Self-Regulation and Self-Regulated Learning on Performance in Islamic Education Course Among Premier Polytechnic Students. In: Prosiding Seminar Pasca Siswazah Pertama, Fakulti Tamadun Islam (Proceedings of the First Postgraduate Seminar, Faculty of Islamic Civilization), 26 June 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Mukhtaruddin, R. N. S. R. and Abdul Rahman, Hasimah and Hassan, Mohammad Yusri and Jamian, Jasrul Jamani (2013) Impact of load expansion to the renewable energy system performance. In: 2013 IEEE Student Conference on Research & Development.

Abd Rahman, Norhan (2013) Impact of urban development on groundwater quality in Madinah City, Saudi Arabia. In: 6th International Perspective on Water Resources & The Environment , 2013.

Sharifi, S. and Almula, T. A. D. M. S. and Gohari, S. and Sharifishourabi, G. and Saed, Y. and Yahya, M. Y. B. (2013) Impact response of laminated composite cylindrical shell: finite element simulation approach. In: Applied Mechanics And Materials.

Ariff, M. S. M. and Yun, L. O. and Zakuan, N and Ismail, K (2013) The impacts of service quality and customer satisfaction on customer loyalty in internet banking. In: World Congress On Administrative And Political Sciences.

Shamsuddin, Shuhana and Hussin, Natasha Azim (2013) Implementation of crime prevention through environmental design by Kuala Lumpur City Hall. In: 3rd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2013), MAY 24-26, 2013, Jinan, PEOPLES R CHINA.

Shamsudin, Sarimah and Karim, H. R. (2013) Implementation of focus on form: teachers' and students' conceptions. In: Akdeniz Language Studies Conference.

Ibrahim, Noraini and Abd.Halim, Shahliza (2013) Implementation of Project Oriented Problem Based Learning (POPBL) in introduction to programming course. In: International Research Symposium on Problem Based Learning (IRSPBL) 2013, 2013.

Salem, M. and Jusoh, Awang and Nik Idris, Nik Rumzi (2013) Implementing buck converter for battery charger using soft switching techniques. In: 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013, 3rd-4th June 2013, Langkawi, Malaysia.

Abdul Ghani, Faizah and Abdullah Kamal, Suraya Lin and Abd. Aziz, Azian (2013) The implication of parenting styles on the akhlak of Muslim teenagers in the south of Malaysia. In: 4th World Conference on Psychology, Counseling and Guidance (WCPCG2013), 24-26 May, 2013, Istanbul, Turkey.

Dodo, Y. A. and Kandar, M. Z. and Ossen, D. R. and Jibril, J. D. and Bornoma, A. H. and Abubakar, A. I. (2013) Importance of a view window in rating green office buildings. In: Advanced Materials Research.

Abdoli Sejzi, Abbas and Aris, Baharuddin and Chan, Pey Yuh (2013) Important soft skills for university students in 21st century. In: 4th International Graduate Conference on Engineering, Science, and Humanities (IGCESH 2013), UTM Skudai, Johor.

Abdul Latiff, Zulkarnain (2013) Improve gasoline engine performance by studying the effect of intake system design. In: JSAE annual Congress (Spring), Pacifico Yokohama.

Abuobieda, A. and Salim, N. and Kumar, Y. J. and Osman, A. H. (2013) An improved evolutionary algorithm for extractive text summarization. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Ismail, Zuhaimy and Abu, Noratikah (2013) An improved parameter estimation of bass model for forecasting new car demand. In: Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2013 (SKASM2013), 2013.

Osman, Ahmed Hamza and Salim, Naomie (2013) An improved semantic plagiarism detection scheme based on chi-squared automatic interaction detection. In: 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013, 2013, Sudan.

Sham, R. and Hussein, M. Z. S. M. and Ismail, H. N. and Latif, A. A. and Mohamed, S. and Othman, R. and Yatim, N. H. M. (2013) An improved travel safety for urban commuters using an itracks system. In: Proceedings - 2013 IEEE 3rd International Conference on System Engineering and Technology, ICSET 2013.

Abdul Haq, R. H. and Wahab, M. S. and Wahit, M. U. B. (2013) Improvement of mechanical properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). In: Applied Mechanics And Materials.

Abideen , Muzaffar Zainal (2013) Improving the coagulation process in drinking water treatment using response surface method jar test. In: International Conference on Innovation Challenges in Multidisciplinary Research & Practice 2013.

Afshar, Jafar and Zahraee, Seyed Mojib and Bayat, Sajjad and Shahpanah, Ataollah and Syed Hassan, Syed Ahmad Helmi (2013) Improving the layout design of manufacturing company using craft and graph-based method. In: Technology, Education, and Science International Conference.

Ali, Rusmidah (2013) In-depth of surface properties investigation over ceria based catalyts for carbon dioxide methanation. In: The 3rd Academic Conference on Natural Science for Master and PhD Students for ASEAN countries (CASEAN-2013), 11-15 Nov. 2013., 2013, Royal University of Phnom Penh.

Ahmad, Z. and Nagel, G. and Thambiratnam, D. (2013) Inclusion of tapered tubes in enhancing the crash performance of automotive frontal structures. In: Advanced Computational Engineering And Experimenting II.

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohd. Yatim, Jamaludin and Hassan, Wan Haslina (2013) Inculcating awareness of sustainable development in first year engineering students - a comparative study of pedagogical approaches. In: Research in Engineering Education Symposium 2013.

Mohd. Yusof, Khairiyah and Phang, Fatin Aliah and Kamaruddin, Mohd. Johari and Hassim, Mimi Haryani and Hashim, Haslenda and Sadikin, Aziatul Niza and Jamaluddin, Jamarosliza and Othman, Norhayani and Hassan, Hashim and Syed Hassan, Syed Ahmad Helmi and Abdul Aziz, Azmahani and Ujang, Zaini (2013) Inculcating sustainable development among engineering students, part 1: designing problems and learning environments with impact. In: Engineering Education for Sustainable Development.

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Abdul Latif, Adibah and Mohamed Yatim, Jamaludin (2013) Inculcating sustainable development among engineering students, part 2 : assessing the impact on knowledge and behaviour change. In: Engineering Education for Sustainable Development,.

Syed Hassan, Syed Ahmad Helmi and Mohd. Yusof, Khairiyah and Phang, Fatin Aliah and Mohammad, Shahrin and Abu, Mohd. Salleh (2013) Inculcating team-based problem solving skills, part 1: enhancing problem solving elements. In: Research In Engineering Education Symposium.

Abdullah, Mohamed Ruslan and Pang, C. L. and Abu Husain, Nurulakmar and Abdi, Behzad (2013) Indentation fracture behaviour of fibre metal laminates based on kenaf/epoxy. In: International Conference on Mechanical Engineering Research (ICMER 2013).

Sazali, E. S. and Sahar, M. R. and Ghoshal, S. K. (2013) Influence of europium ion on structural, mechanical and luminescence behavior of tellurite nanoglass. In: 3rd ISESCO International Workshop And Conference On Nanotechnology 2012 (IWCN2012).

Shamsuddin, Shuhana and Zaini, Khazainun (2013) The influence of the surveillance factors towards the residents' perceptions on safety at the shared outdoor spaces in gated community. In: 2nd Global Conference on Civil, Structural and Environmental Engineering, GCCSEE 2013, 28-29 Sept, 2013, Shenzhen, China.

A. Rashid, Ahmad Safuan (2013) Influence of transport layer slope under rainfall infiltration. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013).

Fathinia, F. and Heshmati, A. and Parsazadeh, M. and Wahid, M. A. and Sies, M. M. (2013) The influence of various inlet geometries on mixed convection flow of ethylene glycol in a backward facing step. In: Applied Mechanics And Materials.

Fukuda, Kanao and Hashimoto, Masaaki and Sugimura, Joichi (2013) Influences of trace water in hydrogen and argon on the tribological properties of pure iron. In: Proceedings Of The ASME/STLE International Joint Tribology Conference, IJTC 2012.

Foroutani, Saman and A. Iahad, Noorminshah and Abdul Rahman, Azizah (2013) An initial framework for interactive health portals; using actor network theory. In: 3rd International Conference on Research and Innovation in Information Systems â?? 2013 (ICRIISâ??13), 2013.

Md. Yusof, Aminah and Nordin, Yahya and Alias, Rose Alinda (2013) An insight on the ability and performance of women in graduate education in Malaysia. In: Social Sciences And Society.

Abdul Rabu, Siti Nazleen and Aris, Baharuddin and Tasir, Zaidatun (2013) Instructor scaffolding and student's critical thinking through asynchronous online discussion forum. In: Learning and Teaching in Computing and Engineering (LaTiCE 2013) , 21-24 March 2013, Macau, China.

Abdul Rabu, Siti Nazleen and Aris, Baharuddin and Tasir, Zaidatun (2013) Instructor scaffolding and students' critical thinking through asynchronous online discussion forum. In: Learning and Teaching in Computing and Engineering (LaTiCE), 2013, 21-24 March 2013, Macau, China.

Ahmad Kamal, M. S. and Bashir, N. and Muhamad, N. A. (2013) Insulating properties of vegetable oils and their blends. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Mohd. Adnan, Noor Asma Adny and Sarmin, Nor Haniza and Mohd. Ali, Nor Muhainiah and Yahya, Zainab and Rahmat, Hamisan (2013) Integral representations of metacyclic groups over a local field. In: The 3rd International Conference on Mathematical Sciences (ICMS 2013)), 17-19 December 2013, Kuala Lumpur, Malaysia.

Azadnia, A. H. and Ghadimi, P. and Saman, M. Z. M. and Wong, K. Y. and Heavey, C. (2013) An integrated approach for sustainable supplier selection using fuzzy logic and fuzzy AHP. In: Applied Mechanics And Materials.

Mat Sulaiman, Abdul Hafiz and Ahmad, Mohd. Ridzuan (2013) Integrated dual nanoprobe-microfluidic system for single cell penetration. In: 2013 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2013).

Abd Halim, Shahliza (2013) Integrated product line s framework and component based development approach for precision farming system product line. In: MySEC2013.

Saedi, Amin and A. Iahad, Noorminshah (2013) An integrated theoretical framework for cloud computing adoption by small and medium-sized enterprises. In: Pacific Asia Conference on Information Systems (PACIS), 2013.

Abdullah, M. A. and Rahim, M. K. A. and Jalil, M. E. and Samsuri, N. A. and Murad, N. A. (2013) Integrated two textile dipole antenna with dual-band textile artificial magnetic conductor. In: 2013 7th European Conference on Antennas and Propagation, EuCAP 2013.

A. Jaafar, Ako and Jawawi, Dayang N. A. (2013) Integration Islamic banking system based on service oriented architecture and enterprise service bus. In: Advances In Intelligent Systems And Computing.

Abdul Rahman, Muhammad Zulkarnain and Wan Kadir, Wan Hazli and Rasib, Abd. Wahid and Ariffin, Azman and Razak, Khamarrul Azahari (2013) Integration of high density airborne lidar and high spatial resolution image for landcover classification. In: International Geoscience and Remote Sensing Symposium, Melbourne, Australia 21-26 July 2012.

Fadil, M. A. and Jalil, N. A. and Mat Darus, I. Z. (2013) Intelligent PID controller using iterative learning algorithm for active vibration controller of flexible beam. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Ullah, Rahat and Fisal, Norsheila and Safdar, Hashim and Maqbool, Wajahat and Khalid, Zubair (2013) Interference management for irregular cell geometry heterogeneous networks. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC 2013), 26th - 28th November 2013, Kuala Lumpur, Malaysia.

Suleiman, A. A. and Muhamad, N. A. and Bashir, N. and Alghamdi, A. S. (2013) Introducing the hybrid-DGA interpretation software as an effective power transformer management tool. In: International Conference On Power Engineering, Energy And Electrical Drives.

Altaay, A. A. J. and Sahib, S. B. and Zamani, M. (2013) An introduction to image steganography techniques. In: Proceedings - 2012 International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2012.

Shamsudin, Sarimah and Abd. Manan, A. and Husin, N. (2013) Introductory engineering corpus: a needs analysis approach. In: Akdeniz Language Studies Conference.

Abdul Ghafar, Mohamed Najib and Nosaku, Monsurah (2013) Investigating working memory in educational research. In: 2nd International Seminar on Quality and Affordable Education ISQAE 2013.

Zainal Abidin, Wardah and Uden, Lorna and Alias, Rose Alinda (2013) Investigation into a university electronic portfolio system using activity theory. In: 7th International Conference On Knowledge Management In Organizations: Service And Cloud Computing.

Han, Wai Soon and Md. Yusof, Aminah and Ismail, Syuhaida (2013) An investigation into the concept of the social infrastructure projects understanding level in Malaysia. In: Social Sciences And Health.

Umar, Muhammad Aminu and Ghazali, Masitah (2013) Investigation into usability attributes for embedded systems testing. In: Malaysian Software Engineering Conference (MySEC) 2013, 2013.

Mohamad Yusof, Mohamad Yusof and Zainal, Z.A. and Ani, Farid Nasir and Miskam, M.A. (2013) An investigation of a self-pressurized alpha V-Type stirling engine converted diesel engine. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Aung, Lwin Moe and Fakuda, Kanao and Abu, Aminudin and Radzi, Raihan (2013) An investigation of lapping characteristics for mirror like finish using a lathe with linear motor. In: The International Conference on Advances in Mechanical and Manufacturing Engineering (ICAM2E), 26-28 Nov, 2013, Kuala Lumpur, Malaysia.

Nornikman, H. and Ahmad, B. H. and Abd. Aziz, M. Z. A. and Rahim, M. K. A. and Othman, A. R. (2013) Investigation of Minkowski patch antenna with meander line split ring resonator (ML-SSR) structure. In: 2013 7th European Conference on Antennas and Propagation, EuCAP 2013.

Mehranzamir, K. and Salimi, B. and Abdul-Malek, Z. (2013) Investigation of preliminary breakdown pulses in lightning waveforms. In: Progress In Electromagnetics Research Symposium.

Salimi, B. and Abdul-Malek, Z. and Mirazimi, S. J. and Mehranzamir, K. (2013) Investigation of short base line lightning detection system by using time of arrival method. In: Intelligent Informatics.

Aziz, M. Z. A. A. and Mufit, N. A. A. and Suaidi, M. K. and Othman, M. A. and Johar, M. F. and Hassan, N. and Rahim, M. K. A. (2013) Investigation of single stub on circular polarized patch antenna at 2.4ghz. In: Proceedings of 23rd International Conference, RADIOELEKTRONIKA 2013.

Mohd. Ghazali, Normah and Abd. Rahim, I. and Quenet, T. and Ab. Muin, Z. (2013) Investigation of the velocity profiles in a ninety-degree curved standing wave resonator with particle image velocimetry. In: Applied Mechanics And Materials.

Ali Khan , Mohd. Noor Azli (2013) An investigation of users’ perceptions towards the importance items of internet financial reporting in Malaysia. In: Global Institute of Applied Business Research (GIABR) 2013 Auckland International Conference: Paper 1, 2013.

Sulaimon, Shodiya and Abdul Aziz, Azhar and Nasution, Henry and Darus, Amer Nordin (2013) Investigation of various mixtures of hc290/hc600 refrigerants in adiabatic capillary tube used in split-type air-conditioner. In: Applied Mechanics and Materials (Volume 388).

Khaleghi, M. and Wahid, M. A. and Seis, M. M. and Saat, A. (2013) Investigation of vortex reacting flows in asymmetric meso scale combustor. In: Applied Mechanics And Materials.

Yahya, R. and Kamarudin, M. R. and Seman, N. and Sabran, M. I. and Jamlos, M. F. (2013) Investigation on CPW koch antenna durability for microwave imaging. In: Progress In Electromagnetics Research Symposium.

Abd Majid, Muhd. Zaimi (2013) Investigation on future building performance factors towards energy efficient travel plan in regional development. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

Abdul-Malek, Z. and MehranZamir, K. and Salimi, B. and Mirazimi, S. J. (2013) Investigation on the probability of ferroresonance phenomenon occurrence in distribution voltage transformers using ATP simulation. In: Intelligent Informatics.

Ramli, N. A. S. and Amin, N. A. S. (2013) Ionic solid nanomaterials: synthesis, characterization and catalytic properties investigation. In: Advanced Materials Research.

Shamsudin, Sarimah and Sadoughvanini, S. and Zaid, Y. H. (2013) Iranian EFL learners' collocational errors in speaking skill. In: Akdeniz Language Studies Conference.

Faridi, M. Shakeel and Javed, Zahid and Abid, M. Haris and Ahmed, Mudassar and Ngadi, Md. Asri (2013) Irots: a proposed cots evaluation & selection methodology for component based software engineering in under-development countries. In: Proceedings Of The 2nd International Conference On Advances In Computer Science And Engineering (CSE 2013).

Ahmad Anuar, Melati (2013) Islamic real estate investment trust: Malaysia and Singapore. In: Conference on Business and Management, AFAP 2013, 2013.

Mohd. Isa, Norlly and Abu Naim, Hamimah (2013) Kajian keperluan pembinaan modul pentaksiran berasaskan sekolah bagi tajuk dinamik dalam Mata Pelajaran Sains Tingkatan 2. In: 2 nd International Seminar on Quality and Affordable Education (ISQAE 2013), 7th to 10th October 2013, Johor Bahru, Johor, Malaysia.

Hanri, Chuzairy and Arshad, Mohammad Yusof (2013) Ke arah pendidikan yang lebih berkualiti : pengamalan pengajaran guru kimia dalam menggalakkan kreativiti. In: 2nd International Seminar on Quality and Affordable Education (ISQAE 2013), 7th-10th October 2013, UTM Skudai, Johor, Johor Bahru.

Abu Bakar, Zainudin (2013) Kecerdasan emosi merentasi jenis-jenis amalan disiplin pelajar di bilik darjah. In: Seminar Penyelidikan Pendidikan Kebangsaan Zon Sabah 2013, 2013.

Hamzah, Naemah and Mustari, Mohd. Ismail and Basiron, Bushrah (2013) Kemahiran yang diperlukan bagi wanita bekerjaya dan berumah tangga masa kini. In: Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13], 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization.

Hamzah, Naemah and Mustari, Mohd Ismail and Basiron, Bushrah (2013) Keperluan kemahiran sains dan teknologi dalam pengurusan rumah tangga dan kerjaya masa kini. In: Seminar on Science, & Technology 2013, 1st Ocktober 2013, Fakultas Sains dan Teknologi UIN Sunan Kalijaga Yogyakarta.

Razi, M. J. M. and Karim, N. S. A. and Mohamed, N. (2013) Knowledge management enablers and knowledge management implementation. In: Proceedings - 2012 International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2012.

Abdul Aziz, Nor Aishah and Abd. Hamid, Mohd. Zolkifli and Saliyan, Ismail and Mohd. Fuad, Nurul Izzati (2013) Kualiti Pendidikan di IPT: pendekatan spiritual dalam Pendidikan Berasaskan Hasil (OBE). In: 2nd International Seminar on Quality and Affordable Education 2013, 7 - 10 October 2013, KSL Hotel & Resort Johor Bahru, Johor, Malaysia.

Safar, Ajmain and Ruskam, Aminuddin and Muhammad, Ahmad Marzuki and Ismail, Idris (2013) Kurikulum akhlak dalam melahirkan saintis Muslim beretika: tinjauan di Malaysia. In: Seminar on Science, & Technology 2013, 1st Oktober 2013, Fakultas Sains dan Teknologi UIN Sunan Kalijaga Yogyakarta.

Hakimi, I. M. and Sharif, S. and Kurniawan, D. (2013) Laminate orientation effect on drilling of carbon fiber reinforced plastic composites. In: Applied Mechanics And Materials.

Abdul Rahman, Muhammad Zulkarnain and Ismail, Zamri and Rasib, Abd. Wahid and Wan Kadir, Wan Hazli and Ariffin, Azman (2013) Landcover classification: does airborne lidar alone capable of producing good quality of landcover map? In: 34th Asian Conference on Remote Sensing 2013 Bridging Sustainable Asia, Bali, Indonesia, October 20-24, 2013.

Ahmad, Ummul Khair and Hong, Chong Chai (2013) The language of promotion in Malaysian banking brochures. In: Fifth International Language Learning Conference (5th ILLC), 2013.

Ahmad, Mohd. Zamani and Mohammad Rosyid, D. and Koto, Jaswar and Sunarsih, Sunarsih and Azman, A. (2013) Large offshore remote terminal- first step towards offshore community settlement. In: Ocean International Seminar, 26 - 27 April 2013, 2013, Universitas Abdurrahman Salleh, Situbondo, Indonesia.

Abdoli Sejzi, Abbas and Aris, Baharuddin (2013) Learning Management System (LMS) and Learning Content Management System (LCMS) at virtual university. In: 2nd International Seminar on Quality and Affordable Education (ISQAE 2013).

Yob, R. C. and Seman, N. and Yusof, K. H. (2013) Least mean square as error correction method of multi-port reflectometer for microwave imaging of human head. In: 11th IEEE Student Conference on Research and Development, SCOReD 2013, 16 December 2013 - 17 December 2013, Putrajaya, Malaysia.

Abdul Majid, Zulkifli (2013) Legislative compliance of secsb towards gas supply act 1993. In: n/a, 2013.

Azman, Nabilah Faiqah and Ali, Marlina and Mohtar, Lilia Ellany (2013) The level of misconceptions on force and motion among physics pre services teachers in UPSI. In: 5th International Seminar on Quality & Affordable Education (ISQAE 2013), 2013.

Kamaruzaman, Anis Farhan and Mohd Zain, Azlan and Mohamed Yusuf, Suhaila and Udin, Amirmudin (2013) Levy flight algorithm for optimization problems - a literature review. In: Applied Mechanics and Materials Vol. 421 (2013).

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Yahya, Khairulzan (2013) Life cycle assessment of two different IBS of recipe endpoint (E) LCIA method. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013).

Samdin, S. Balqis and Ting, Chee-Ming and Salleh, Sh-Hussain and Ariff, A.K. and Noor, A. B. Mohd (2013) Linear dynamic models for classification of single-trial EEG. In: 2013 35TH ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC), JUL 03-07, 2013, Osaka, Japan.

Mohd. Faudzi, Ahmad ‘Athif and Enn, Teh Chuan and Osman, Khairuddin and Ismail, Z. H. (2013) Linearized mathematical model of intelligent pneumatic actuator system: position, force and viscosity controls. In: 2013 9th Asian Control Conference, ASCC 2013.

Hentabli, Hamza and Salim, Naomie and Abdo, Ammar and Saeed, Faisal (2013) LINGO-DOSM: lingo for descriptors of outline shape of molecules. In: 5th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2013, 2013, Kuala Lumpur, Malaysia.

Saparudin, Faiz Asraf and Fisal, Norsheila and Katiran, Norshidah and Marwangi, M. M S and Ab. Ghafar, Aimi Syamimi and Lo, Anthony (2013) Liquid properties inspired non-cooperative resource allocation for femtocell networks. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC 2013), 26th - 28th November 2013, Kuala Lumpur, Malaysia.

Mohammad, Roslina (2013) Logistic and maintenance management to increase readiness army combat armoured vehicle. In: International Conference on Engineering Business Management, 2013, Kuala Lumpur.

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) A longitudinal study on the impact of cooperative problem-based learning in inculcating sustainable development. In: The 4th International Research Symposium on Problem-Based Learning (IRSPBL) 2013, 2013.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Low temperature catalytic steam gasification of waste palm trunk by pottasium carbonate supported on perovskite oxide. In: Advanced Materials Research.

Ahmad, Norhayati (2013) Low-temperature-sintering of shirasu-balloon powders by using Spark-Plasma-Sintering (SPS) method. In: Japan society of mechanical engineer, JSME conference.

Leong, P. M. and Eeu, T. Y. and Leow, T. Q. and Hussin, R. and Ibrahim, Z. (2013) Luminescence properties of rare earth and transition metal ions doped potassium lead borophosphate glass. In: 2012 National Physics Conference (PERFIK 2012).

Sum, W. P. and Hua, W. M. and Hussin, R. and Ibrahim, Z. (2013) Luminescence studies on lithium- strontium borophosphate glasses doped with CR, NI and ZN ions. In: Advanced Materials Research.

Kurniawan, Denni and Jiawkok, N. and Noordin, M. Y. (2013) Machining conditions effect to machining temperature and forces in orthogonal machining of bone. In: Advanced Materials Research (Volume 658).

Alifiah, Mohd Norfian (2013) Macroeconomic variables and prediction of financial distress companies in the industrial products sector in Malaysia. In: International Conference on Economics and Business Research 2013.

Yee, Siang Gan and Fong, Wan Heng and Sarmin, Nor Haniza (2013) Magic star puzzle for educational mathematics. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B, 18 December 2012 through 20 December 2012, Putrajaya; Malaysia.

Baumgarten, D. and Eichardt, R. and Crevecoeur, G. and Supriyanto, E. and Haueisen, J. (2013) Magnetic nanoparticle imaging by random and maximum length sequences of inhomogeneous activation fields. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS.

Mohamed, M.K.A. and Anwar, M.I. and Shafie, S. (2013) Magnetohydrodynamic effects on stagnation point flow past a stretching sheet in presence of thermal radiation with convective boundary conditions. In: AIP Conference Proceedings, 18-20 Dec 2012, Putrajaya, Malaysia.

Mazalan, N. A. and Malek, A. A. and Wahid, M. A. and Mailah, M. and Saat, A. and Sies, M. M. (2013) Main steam temperature modeling based on levenberg-marquardt learning algorithm. In: Applied Mechanics And Materials.

Ali Khan , Mohd. Noor Azli (2013) Malaysian preparers and users perceptions of internet financial reporting. In: 2013 AFAP Conference on Business and Management (ACBM) 2013, 2013.

Hashim, Mazlan and Misbari, Syarifuddin and Shukor, Mohd. Syafiq and Numata, Shinya and Ahmad, Samsudin (2013) Mapping and modelling of animal diversity index in green campus using integrated geospatial techniques and in-situ camera trapping. In: FIG 2014 Research Initiative Seminar, 2013.

Abdul Malik, Adi Maimun and Ahmad, Mohd. Zamani and Abd. Kader, A. S. and Jaswar, Jaswar and Koh, K. K. (2013) Marine technology education in Malaysia - 32 years of experience at UTM. In: Rina, Royal Institution Of Naval Architects - 2Nd International Conference On The Education And Professional Development Of Engineers In The Maritime Industry.

Madanian, Latifehossadat and Syed Mansor, Syed Mohamed Shafeq and Omar, Abdul Hafidz (2013) Marital satisfaction of Iranian female students in Malaysia: a qualitative study. In: 3rd World Conference On Psychology, Counseling And Guidance, WCPCG-2012.

Pek Eek, R. T. and Abd. Jalil, N. and Sahlan, S. and Mat Darus, I. Z. (2013) Matlab based graphical user interface application for vibration simulation of beam structure. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Mohamed, M. Z. and Ghazali, M. F. M. and Idrus, S. M. and Wahab, N. A. (2013) Maximizing output of a sludge drying plant through multiple parameter optimization. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Abd. Razak, Azli and Hagishima, Aya and Ikegaya, Naoki and Mohamad, Mohd. Faizal and Zaki, Sheikh Ahmad (2013) Mean wind flow field around idealized block arrays with various aspect ratios. In: Applied Mechanics And Materials.

Elshafie, H. and Fisal, N. and Baguda, Y. and Sayuti, H. and Abdulrahman, Y. and Hafizal, M. and Ramli, N. and Abbas, M. (2013) Measurement of uhf signal propagation loss under different altitude in hilly environment. In: Information, Communication And Engineering.

Abdul Ghani, Siti Waqina and Abu Bakar, Aznizam and Samsudin, Sani Amril (2013) Mechanical properties of chitosan modified montmorillonite filled tapioca starch nanocomposite films. In: Advanced Materials Research (Volume 686).

Ibrahim , Izni Syahrizal (2013) The mechanical properties of hybrid fibre reinforced composite concrete. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 2013.

Fatihhi, S. J. and Syahrom, Ardiyansyah and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq (2013) Mechanical properties of trabecular bone through compression and combined compression-torsion test: a comparative study. In: Applied Mechanics and Materials, Vol. 393, 2013.

Abu Bakar, Aznizam (2013) Mechanical, thermal and characterization of polycaprolactone/tapioca starch composite films compatibillized by chitosan. In: Malaysian Polymer International Conference, 2013.

Muttakin, Imamul and Supriyanto, Eko (2013) Medical ultrasound power measurement system using PVDF sensor and FPGA technology. In: IEEE International Instrumentation and Measurement Technology Conference (I2MTC), 2013, 6th-9th May 2013, Minneapolis, MN, USA.

Jasmi, Kamarul Azmi (2013) Membangun kemahiran Al-Quran dan Jawi kepada anak-anak (Developing the skills of the Qur'an and Jawi for kids). In: Bengkel Pemulihan dan Pengayaan Pengajaran dan Pembelajaran (PdP) al-Quran SRA JAWI (Remedial and Enrichment Workshop for Teaching and Learning Quran SRA JAWI), 28-29 October 2013, Lecture Hall, Masjid Negara, Jalan Perdana 50480, Kuala Lumpur. (Unpublished)

Abbaszadehfallah, I. and Esmaeeli, H. and Chepuan, O. B. and Hosseini, S. H. (2013) Merging gap acceptance at midblock u-turn facility (a case study on multilane divided highway in Malaysia). In: Applied Mechanics And Materials.

Albaham, Ameer Tawfik and Salim, Naomie (2013) Meta search models for online forum thread retrieval: research in progress. In: 5th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2013, 2013, Kuala Lumpur, Malaysia.

Ahmad, M. F. and Zakuan, N. and Jusoh, A. and Tasir, Z. and Takala, J. (2013) Meta-analysis of the relationship between TQM and business performance. In: IOP Conference Series: Materials Science and Engineering.

Omar, M. and Mustaffa, N. H. H. and Othman, S. N. (2013) Metaheuristic simulation optimisation for the stochastic multi-retailer supply chain. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Abdul Hassan, Norhidayah (2013) Microstructural study of reclaimed asphalt specimen preparation using x-ray computed tomography. In: International Conference On Asphalt Materials, 2013.

Abdul Hassan, Norhidayah (2013) Microstructure study of asphalt specimen preparation using X-Ray tomography images. In: International Conference On Advanced Material Research, 2013.

Ani, Farid Nasir (2013) Microwave thermal conversion of biomass for biofuels and value-added products. In: 2nd international Conference on Mechanical Engineering And Renewable Energy, 2013.

Jeong, Jin Soo (2013) Minimum phase whitening filter to speech beamforming technique. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Eltyeb, Safaa and Salim, Naomie (2013) Mining lexico-syntactic patterns to extract chemical entities with their associated properties. In: 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013, 2013, Sudan.

Mohd Kasim, Abdul Rahman and Mohammad, Nurul Farahain and Aurangzaib, Aurangzaib and Shafie, Sharidan (2013) Mixed convection flow of viscoelastic fluid over a sphere with constant heat flux. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Abd. Rahman, Azlan (2013) Modal parameters and their influential factors in a prestressed concrete panel. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), 2013.

Idris, Norsham and Yusof, Norazah and Mohd. Hashim, Siti Zaiton (2013) A model for adaptive selection of learning material in an intelligent learning system using combination of supervised and unsupervised machine learning techniques. In: International Conference on Artificial Intelligence In Computer Science and ICT 2013 (AICS 2013), 2013.

Abdul Rani, Muhamad Norhisham and Ouyang, H. and Yunus, Mochamad A. and Aminudin, B. A. (2013) Model updating for a thin steel sheet welded structure. In: 20th International Congress on Sound & Vibration, 2013.

Rahman, R. Z. A. and Yusof, R. and Ismail, F. S. (2013) Model-based fault detection and diagnosis optimization for process control rig. In: 2013 9Th Asian Control Conference, Ascc 2013.

Hadi, M. S. and Mat Darus, I. Z. and Yatim, H. (2013) Modeling flexible plate structure system with free-free-clamped-clamped (FFCC) edges using particle swarm optimization. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Jaya, A. S. M. and Mohd Hashim, Siti Zaiton and Haron, H. and Ngah, R. and Muhamad, M.R. and Rahman, M. N. A. (2013) Modeling of anfis in predicting tin coatings roughness. In: 2013 5TH INTERNATIONAL CONFERENCE ON COMPUTER SCIENCE AND INFORMATION TECHNOLOGY (CSIT), MAR 27-28, 2013, Amman, Jordon.

Abdul Raman, Norazmein (2013) Modeling of cutting force and chip formation when edge-milling medium density fiberboard. In: Conference on forestry and forest products research 2013 "Forestry R, D & C: Meeting National and Global Needs", 2013.

Mahmud, Nazriah and Yahya, Azli and Abdul Kadir, Mohammed Rafiq and Andromeda, Trias and Hashim, Nor Liyana Safura (2013) Modeling of flyback converter for micro machining biomedical component. In: Applied Mechanics and Materials 284-287.

Ranjbari, Leyla and Bahar, Arifah and Abdul Aziz, Zainal (2013) Modeling of information flows in natural gas storage facility. In: AIP Conference Proceedings.

Yao, Low Wen and Abdul Aziz, Mohd. Junaidi and Kong, Pui Yee and Nik Idris, Nik Rumzi (2013) Modeling of lithium-ion battery using MATLAB/Simulink. In: Industrial Electronics Society, IECON 2013 - 39th annual Conference of the IEEE, 2013.

Ahmad, Arshad (2013) Modeling of ultrasonic assisted reboiler system. In: 2nd Conference on Emerging Energy & Process Technology 2013 (CONCEPT 2013), 9-10 Dec 2013, 2013, Desaru, Johor Bahru.

Mohd Yunos, Zuriahati and Shamsuddin, Siti Mariyam and Ismail, Noriszura and Sallehuddin, Roselina (2013) Modeling the Malaysian motor insurance claim using artificial neural network and adaptive neurofuzzy inference system. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Ab. Kadir, Mariyana Aida (2013) Modelling of heat tranfer analysis of the roorkee frame. In: The 9th International Conference on Geotechnical and Transportation Engineering (GEOTROPIKA 2013) and Construction The 1st Conference on Construction and Building Engineering (ICONBUILD 2013), 2013.

Ahmad, Arshad (2013) Modelling the impact of natural and security hazard in an LNG processing facility. In: 2nd Conference on Emerging Energy and Process Technology (CONCEPT2013), 2013.

Tuan, Lo Ying and Jusoh, Ahmad (2013) Moderating effect of brand equity on relationship quality in chain restaurant industry: a conceptual paper. In: Proceedings Of The 2013 International Conference On Information, Business And Education Technology (ICIBET 2013).

Li, L. S. and Djauhari, M. A. (2013) Monitoring autocorrelated process: a geometric brownian motion process approach. In: AIP Conference Proceedings.

Omar, S. and Jaafar, M. Z. and Ismail, A. R. and Sulaiman, W. R. W. (2013) Monitoring foam stability in foam assisted water alternate gas (FAWAG) processes using electrokinetic signals. In: Society Of Petroleum Engineers - SPE Enhanced Oil Recovery Conference, Eorc 2013: Delivering The Promise Now!.

Umar, Zahrul and Wan Mohd. Akib, Wan Abdul Aziz and Ahmad, Anuar (2013) Monitoring shoreline change using remote sensing & GIS: a case study of Padang Coastal Area, Indonesia. In: 9th International Colloquium on Signal Processing & Its Application, 2013, 2013.

Umar, Zahrul and Wan Mohd. Akib, Wan Abd Aziz and Ahmad, Anuar (2013) Monitoring shoreline change using remote sensing and GIS: a case study of Padang coastal area, Indonesia. In: 2013 IEEE 9th International Colloquium On Signal Processing And Its Applications (CSPA), 8-10 March 2013, Kuala Lumpur, Malaysia.

Gee, Ong Ken and Sarker, Md. Latifur Rahman (2013) Monitoring the effects of land use/land cover changes on heat island generation. In: Earth Resources And Environmental Remote Sensing/GIS Applications IV.

Anuar, S. M. M. and Jaafar, M. Z. and Jaafar, M. Z. and Sulaiman, W. R. W. and Ismail, A. R. (2013) Monitoring water alternate gas (WAG) process using streaming potential measurement. In: Society of Petroleum Engineers - SPE Enhanced Oil Recovery Conference, EORC 2013: Delivering the Promise NOW!.

Rosli, D’oria Islamiah and Abdul Rahman, Azizah and Alias, Rose Alinda (2013) Mouse tracker analysis on cognitive awareness. In: 4th IEEE international Conference on Cognitive information Communication (CoginfoCom 2013), 2013.

Ahmad, Arshad (2013) Multi component distillation simulation of aromatic compound. In: 2nd Conference on Emerging Energy & process Technology (CONCEPT2013), 2013.

Kumar, Yogan Jaya and Salim, Naomie and Abuobieda, Albaraa and Tawfik, Ameer (2013) Multi document summarization based on cross-document relation using voting technique. In: 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013, 2013, Sudan.

Aabidi, E. S. and Kamarudin, M. R. and Rahman, T. A. and Iddi, H. U. (2013) Multi-band circular patch antenna for wideband application. In: Progress In Electromagnetics Research Symposium.

Lee, G. S. and Djauhari, M. A. (2013) Multidimensional stock network analysis: an escoufier's RV coefficient approach. In: AIP Conference Proceedings.

Moorthy, K. and Mohamad, M. S. and Deris, S. (2013) Multiple gene sets for cancer classification using gene range selection based on random forest. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Razali, M. C. and Wahab, N. A. and Balaguer, P. and Rahmat, M. F. and Samsudin, S. I. (2013) Multivariable PID controllers for dynamic process. In: 2013 9th Asian Control Conference, ASCC 2013.

Masood, Ibrahim and Hassan, Adnan (2013) Multivariate process monitoring and diagnosis: a case study. In: Applied Mechanics And Materials.

Jamaludin, I. W. and Wahab, N. A. and Khalid, N. S. and Sahlan, S. and Ibrahim, Z. and Rahmat, M. F. (2013) N4SID and moesp subspace identification methods. In: Proceedings - 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, CSPA 2013.

Ahmad, M. R. and Mohd. Esa, M. R. and Cooray, V. (2013) Narrow bipolar pulses and associated microwave radiation. In: Progress In Electromagnetics Research Symposium.

Ubaidullah, S. and Osman, K. (2013) Natural convection in a differentially heated cavity using splitting method. In: Applied Mechanics And Materials.

Saimy, I. S. and Yusof, N. A. M. (2013) The need for better water policy and governance in Malaysia. In: World Congress On Administrative And Political Sciences.

Tei, Y. Z. and Marsono, M. N. and Shaikh-Husin, N. and Hau, Y. W. (2013) Network partitioning and GA heuristic crossover for NOC application mapping. In: Proceedings - IEEE International Symposium on Circuits and Systems.

Maizir, H. and Kassim, Khairul Anuar (2013) Neural network application in prediction of axial bearing capacity of driven piles. In: Lecture Notes In Engineering And Computer Science.

Gaya, M. S. and Wahab, N. A. and Sam, Y. M. and Razali, M. C. and Samsudin, S. I. (2013) Neuro-fuzzy modelling of wastewater treatment system. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Abdul Latib, Azlan and Bujang, Ahmad Ariffian and Kamin, Yusri and Udin, Amirmuddin and Libunao, Wilfredo (2013) New academia learning innovation : introducing the job creation program for undergraduate students in Unviersiti Teknologi Malaysia. In: 2nd international Seminar on Quality & Affordable Education 2013 (Management in Education), 2013.

Abdul Latib , Azlan (2013) New academia learning innovation: introducing the job creation program for undergraduate students in University Teknologi Malaysia. In: 2nd International Seminar on Quality and Affordable Education (ISQAE 2013), 7-10 October 2013, 2013, Johor Bahru.

Abdul Rahman, Roselainy and Mohammad Yusof, Yudariah and Ismail, Zaleha and Kashefi, Hamidreza and Firouzian, Soheila (2013) A new direction in engineering mathematics: integrating mathematical thinking and engineering thinking. In: 2013 Research in Engineering Education Symposium (REES2013), 2013.

Samadi, M. and Othman, M. F. (2013) A new fast and robust stereo matching algorithm for robotic systems. In: Advances In Intelligent Systems And Computing.

Barati, Vahid and Nazari, Mojtaba and David, Vincent Daniel and Abdul Aziz, Zainal (2013) A new homotopy analysis method for approximating the analytic solution of KDV equation. In: 5th International Conference on Numerical Optimization and Operations Research (ICNOOR-V), 2013.

Jalil, N. A. and Mat Darus, I. Z. (2013) Non-parametric neuro-model of a flexible beam structure. In: IEEE Symposium on Computers and Informatics, ISCI 2013.

Abdu, A. M. and Mokji, M. M. (2013) A novel approach to a dynamic template generation algorithm for multiple-choice forms. In: Proceedings - 2012 IEEE International Conference On Control System, Computing And Engineering, ICCSCE 2012.

Mustapha, Siti Noor Hidayah and Rahmat, Abdul Razak and Arsad, Agus and Shoot, Kian Yeong (2013) Novel bio based resins from blends of functionalized palm oil and unsaturated polyester resin. In: 1st International Conference on the science & engineering of materials. (ICoSEM 2013), 2013.

Shafer, Muhammad Gary and Abu Bakar, Kamalrulnizam and Ramadhani, Farah (2013) Novel dual demand side management (2dsm) scheme in optimizing utilization of available power. In: IEEE Symposium on Computational Intelligence in Control and Automation, CICA 2013, 2013.

Shafer, M. G. and Bakar, K. A. and Ramadhani, F. (2013) Novel dual demand side management (2DSM) scheme in optimizing utilization of available power. In: Proceedings of the 2013 IEEE Symposium on Computational Intelligence in Control and Automation, CICA 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013.

Boroujerdizadeh, A. and Ghobadi, A. R. and Yaribakht, A. H. and Abdoullah, Shahidan (2013) A novel method to reduce collusion attack possibility on watermarking. In: International Conference On Advanced Communication Technology, ICACT.

Shahidinejad, Ali and Farrokhtala, Ali and Asadi, Saman and Mofarrahi, Mahroo and Anwar, Toni (2013) A novel quantum-dot cellular automata XOR design. In: 2012 3rd International Conference on Manufacturing Science and Technology, ICMST 2012, 18 August 2012 through 19 August 2012, New Delhi, India.

Talaiekhozan, Amirreza and Keyvanfar, Ali and Andalib, Ramin and Shafaghat, Arezou (2013) A novel taxanomy on self-healing concrete research development. In: 3rd National Conference on Applied Chemistry in Novel Technologies, 2013.

Yahya, Z. and Mohd. Ali, N. M. and Sarmin, N. H. and Johari, N. A. (2013) The NTH commutativity degree of some 2-engel groups. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, Pts A And B.

Cupu, D. R. P. and Bahari, A. and Osman, K. and Md. Sheriff, J. (2013) Numerical analysis of elastohydrodynamic lubrication with non newtonian lubricant. In: Applied Mechanics And Materials.

Saadun, M. N. A. and Azwadi, C. S. N. and Hazwani, M. N. and Zakaria, M. S. and Manaf, M. Z. A. and Hanafi, M. H. (2013) Numerical analysis on the effects of cavity geometry with heat towards contaminant removal. In: Applied Mechanics And Materials.

Natarajan, Elango and Mohd. Faudzi, Ahmad Athif and Jeevanantham, Viknesh Malliga and Muhammad Razif, Muhammad Rusydi and Mohd. Nordin, Ili Najaa Aimi (2013) Numerical dynamic analysis of a single link soft robot finger. In: Applied Mechanics And Materials.

Sidik, N. A. C. and Safdari, A. (2013) Numerical investigation of 2-D free convection of nanofluid in L-shaped enclosure. In: Applied Mechanics And Materials.

Ishak, M. S. A. and Arizal, M. A. A. and Jaafar, M. N. M. and Norwazan, A. R. and Azmi, I. (2013) Numerical investigation of combustion performance utilizing envo-diesel blends. In: Advanced Materials Research.

Lee, Yeonghuei and Tan, Chersiang and Lee, Yee Ling and Tahir, Mahmood Md Md and Mohammad, Shahrin and Shek, Poingian (2013) Numerical modelling of stiffness and strength behaviour of top-seat flange-cleat connection for cold-formed double channel section. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012;, 2 November 2012 through 6 November 2012, Kaohsiung; Taiwan.

Kermani, E. P. and Safdari, A. and Azwadi, C. S. N. (2013) Numerical prediction of heat transfer from heated thin plate in a square cavity by using LBM. In: Applied Mechanics And Materials.

Sheldareh, A. A. and Safdari, A. and Sidik, N. A. C. (2013) Numerical prediction of heat transfer from localized heating in enclosure using cip method. In: Applied Mechanics And Materials.

Mohd. Said, N. and Ibrahim, A. and Alias, N. (2013) Numerical simulation of hypoxic cell regulation in avascular tumor growth. In: AIP Conference Proceedings.

Sumeru, K. and Nasution, H. and Ani, F. N. (2013) Numerical study of ejector as an expansion device in split-type air conditioner. In: Applied Mechanics And Materials.

Wahid, M. A. and Gholami, A. A. and Mohammed, H. A. (2013) Numerical study of fluid flow and heat transfer enhancement of nanofluids over tube bank. In: Applied Mechanics And Materials.

Parsazadeh, M. and Fathinia, F. and Heshmati, A. and Wahid, M. A. and Sies, M. M. (2013) Numerical study on heat transfer of turbulent flow in a channel with composite arrangement obstacles. In: Applied Mechanics And Materials.

Abdul Malek, Adi Maimun and Nakisa, Mehdi and Tarmizi, Ahmad M. and Ahmed, Yasser Mohamed and Behrouzi, Fatemeh (2013) Numerical study on hydrodynamic resistance of new hull design for multipurpose amphibious vehicle. In: 2nd Inernational Conference on Recent Advances In Automotive Engineering & Mobility Research (ReCAR 2013), 2013.

Abdul Malik, Adi Maimun (2013) Observation of the 3D flow around a propeller in confined water. In: The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), 2013.

Gohari, M. and Abdul Rahman, Roslan and Tahmasebi, M. (2013) Off-road seat suspension optimization by particle swarm algorithm. In: Applied Mechanics And Materials.

Ilangovan, S. and Sarmin, N. H. (2013) On graphs related to conjugacy classes of some two-groups. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Mohd. Adnan, N. A. and Sarmin, N. H. and Mohd. Ali, N. M. and Yahya, Z. and Zakaria M., M. (2013) On matrix representation of some finite groups. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Yahya, Z. and Mohd. Ali, N. M. and Sarmin, N. H. and Sabani, M. S. and Zakaria, M. (2013) On NTH commutativity degree of some 3-engel groups. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Davoudi, Mohammad Mahd and Öchsner, Andreas (2013) On the accuracy of finite difference schemes for beam problems in the elastic range. In: Materialwissenschaft und Werkstofftechnik.

Riegel, Harald and Fruhstuck, J and Merkel, Markus and Winkler, Rolf G and Öchsner, Andreas (2013) On the laser beam cutting of metallic hollow sphere structures. In: High-Power Laser Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications II; San Francisco, CA; United States, 5 - 7 February 2013, San Francisco, CA; United States.

Araújo, Manuel António and Merkel, Markus and Riegel, Harald and Öchsner, Andreas (2013) On the numerical simulation of laser beam cutting of hollow sphere structures. In: Materialwissenschaft Und Werkstofftechnik.

Abdullah, Hanida and Abu, Aminudin and Muhamad, Pauziah and Sahekhaini, Asnizah and Lee, Kee Quen (2013) On theoretical of transmission loss in exhaust muffler system. In: Advanced Materials Research.

Jalil, M. E. and Rahim, M. K. A. and Samsuri, N. A. and Murad, N. A. and Othman, N. and Majid, H. A. (2013) On-body investigation of dual band diamond textile antenna for wearable applications at 2.45ghz and 5.8ghz. In: 2013 7th European Conference on Antennas and Propagation, EuCAP 2013.

Zubair, Suleiman and Fisal, Norsheila and Maqbool, Wajahat and Abazeed, Mohammed B. and AbdulAzeez, Hassan T. and Salihu, Bala Alhaji (2013) Online priority aware streaming framework for cognitive radio sensor networks. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC 2013), 26th - 28th November 2013, Kuala Lumpur, Malaysia.

Md. Ariff, Mohd. Shoki and SzeYan, Ng. and Zakuan, Norhayati and Abdul Rahim, Kamaruzzaman and Ismail, Khalid (2013) Online purchasing behavior of Malaysia's young consumer. In: International Congress on Interdisciplinary Business and Social Science 2013, 2013, Jakarta, Indonesia.

Abuobieda, Albaraa and Salim, Naomie and Kumar, Yogan Jaya and Osman, Ahmed Hamza (2013) Opposition differential evolution based method for text summarization. In: 5th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2013, 2013, Kuala Lumpur, Malaysia.

Algeelani, N. A. and M. Piah, M. A. and Zafar Iqbal, S. M. (2013) Optical detection and evaluation of partial discharge on glass insulator. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Loi, W. S. and Ong, Chee Tiong (2013) Optical solitons: mathematical model and simulations. In: Beiac 2013 - 2013 IEEE Business Engineering And Industrial Applications Colloquium.

Muji, S. Z. M. and Sari, S. and Rahim, R. A. and Rahiman, M. H. F. (2013) Optical tomography: a new filter technique for post processing image. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Selamat, Hazlina and Bilong, S. D. A. (2013) Optimal controller design for a railway vehicle suspension system using particle swarm optimization. In: 2013 9th Asian Control Conference, ASCC 2013.

Mantoro, Teddy and Asian, Jelita and Octavian, Riza and Ayu, Media Anugerah (2013) Optimal translation of English to Bahasa Indonesia using statistical machine translation system. In: 5th International Conference on Information and Communication Technology for the Muslim World (ICT4M), MAR 26-27, 2013, Rabat, Morocco.

Ali El-Enshasy, Hesham Ali Metwally (2013) Optimization medium using response surface methodology for erythromycin production by saccharopolyspora erythraea. In: International Congress of the Malaysian Society for Microbiology (ICMSM 2013). 12-15 December 2013., 2013, Langkawi Lagoon Resort, Kedah Malaysia. .

Golshan, Abolfazl and Ghodsiyeh, Danial G and Gohari, Soheil and Ayob, Amran and B. T.Hang Tuah, Baharudin (2013) Optimization of machining parameters during drilling of 7075 aluminium alloy. In: 2012 International Conference on Mechanical Materials and Manufacturing Engineering, ICMMME 2012, 5 October 2012 through 6 October 2012, Dalian; China.

Lawal, S. and Halimoon, Hazwan and Zainal Alam, Muhd. Nazrul Hisham and Abd. Hamid, Mohd. Kamaruddin (2013) Optimization of microbioreactor operating volume by using attainable region approach. In: 6th International Conference on Process Systems Engineering - PSE Asia 2013, 2013.

Iliya, S. Z and Abdul Rahman, Tharek and Iddi, H. U. and Purnamirza, T. and Orakwue, S. and Elijah, O. (2013) Optimization of radial line slots array antenna design for satellite communications. In: IEEE 3rd International Conference on Space Science and Communication (IconSpace), JUL 01-03, 2013, Malaysia.

Ramadhani, F. and Bakar, K. A. and Shafer, M. G. (2013) Optimization of standalone street light system with consideration of lighting control. In: 2013 International Conference On Technological Advances In Electrical, Electronics And Computer Engineering (TAEECE).

Mohamed, M. Z. and Ghazali, M. F. M. and Idrus, S. M. and Wahab, N. A. (2013) Optimization through artificial neural network on a programmable logic controller for a sludge drying plant. In: Proceedings - 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, CSPA 2013.

Zainal Abidin, Nurhuda and Sahlan, Shafishuhaza and Abdul Wahab, Norhaliza (2013) Optimization tuning of PI controller of quadrupple tank process. In: 2013 Australian Control Conference (AUCC 2013), 2013.

Chizari, Hassan and Embi, Mohd. Rashid and Mohd. Yatim, Yahya and Abdullah, Hanan (2013) Optimum number and optimal location of readers for RFID power tags in buildings inhabitant control applications. In: IEEE International Conference on RFID-Technologies and Applications (RFID-TA), 2013, 4 - 5 September 2013, Johor Bahru, Malaysia. (Submitted)

Mirzal, Andri (2013) Orthogonal nonnegative matrix factorization for blind image separation. In: 3rd International Visual Informatics Conference, IVIC 2013, 13 - 15 November 2013, Selangor; Malaysia.

Abdul Malik, Adi Maimun (2013) Overview of research on vortex induced vibration of marine riser. In: The International Conference on Marine Safety and Environment, 12-13 November 2013, (IMSE 2013), 2013, Johor Bahru, Malaysia.

Azman, M. Asyraf and Mohd. Faudzi, Ahmad 'Athif and Elnimair, Mohamed Omer and Hikmat, Omer F. and Osman, Khairuddin and Chai, Chang Kai (2013) P-adaptive neuro-fuzzy and pd-fuzzy controller design for position control of a modified single acting pneumatic cylinder. In: 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics: Mechatronics for Human Wellbeing, AIM 2013.

Aabidi, E. S. and Kamarudin, M. R. and Rahman, T. A. and Iddi, H. U. (2013) P-shape monopole antenna design for WBAN application. In: Progress In Electromagnetics Research Symposium.

Yahya, Wira Jazair and Ani, Farid Nasir and Samion, Syahrullail and Golshokouh, Iman (2013) Palm fatty acid distillate as an alternative source for hydraulic oil. In: Applied Mechanics And Materials.

Adnan , Robiah (2013) Parameter estimation in the presence of heteroscedastic error and outliers in multiple linear regression. In: The 4Th International Graduate Conference on Engineering Science & Humanity 2013, 2013.

Monemi, A. and Zarei, R. and Marsono, M. N. and Khalil-Hani, M. (2013) Parameterizable decision tree classifier on NETFPGA. In: Intelligent Informatics.

Yazid, I. M. and Mazlan, S. A. and Zamzuri, H. and Mughni, M. J. and Chuprat, S. (2013) Parameters consideration in designing a magnetorheological damper. In: Materials And Applications For Sensors And Transducers II.

Abdullah, Redzuan (2013) Parametric study of concrete load bearing wall with opening for double storey houses. In: The International Graduate Conference on Engineering, Science and Humanities (IGCEISH2013), 2013, Universiti Teknologi Malaysia (UTM), Johor, Malaysia.

Arief, Y. Z. and Ismail, M. I. and Makmud, M. Z. H. and Aulia, Adzis Z. and Muhamad, N. A. (2013) Partial discharge characteristics of natural rubber blends with inorganic nanofiller as electrical insulating material. In: Applied Mechanics And Materials.

Agos, M. F. and Muhamad, N. A. and Rahim, H. A. (2013) Particle detector for gas insulated switchgear and the effect on environment. In: Applied Mechanics And Materials.

Hanim, Yatim and Mat Darus, Intan Zaurah and Muhammad Sukri, Hadi (2013) Particle swarm optimization for identification of a flexible manipulator system. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 7-9 April 2013, Langkawi, Malaysia.

Selamat, N. A. and Abdul Wahab, Norhaliza and Sahlan, S. (2013) Particle swarm optimization for multivariable PID controller tuning. In: 2013 IEEE 9th International Colloquium On Signal Processing And Its Applications (CSPA).

Abdullah, Nurdiana and Ismail, Syuhaida and Surif, Johari (2013) Particulate nature of matter in chemistry: Malaysia pre-service teachers conceptions and understanding. In: 4th International Conference on Education and Sports Education (ESE), APR 11-12, 2013, Hong Kong.

Ahmad Anuar, Melati (2013) Pathology and study of obstacles on the way of new instruments application in the Islamic banking. In: 4th International Graduate Conference On Engineering, Sciences And Humanities, 2013.

Abd. Wahid, Nur Salwa (2013) Pemantapan asas Islamiah secara holistic dikalangan mahasiswa. In: NASDEC-Persidangan Pelajar Peringkat Kebangsaan, 2013.

Mahadi, Mashitoh and Mohd. Amin, Nor Fadila and Abdul Latif, Adibah and Musta’amal, Aede Hatib and Ismail, Sarimah and Nordin, Mohd. Safarin and Ghaffar, Mohd. Najib (2013) Pembangunan instrumen gaya penyelesaian masalah dalam kalangan Pelajar Pendidikan Teknik dan Vokasional. In: 2nd International Seminar on Quality & Affordable Education ISQAE2013 Proceeding: Management in Education, 2013.

Jasmi, Kamarul Azmi (2013) Pembelajaran aktif dalam Pendidikan Islam: pengamalan Guru Cemerlang Pendidikan Islam. In: Seminar Pemerkasaan Pengajaran Agama Islam di Malaysia (Seminar Empowerment Islamic Teaching in Malaysia), 24-25 September 2013, Main Hall of Institut Kefahaman Islam Malaysia (IKIM).

Ahmad , Tahir (2013) Pemodelan ruang keadaan sistem pemanas untuk simulasi dan analisis. In: SKSM 21, 2013.

Abd. Wahid, Nur Salwa (2013) Pemupukan Kecerdasan Emosi (EQ) di kalangan pelajar melalui program khidmat masyarakat. In: NASDEC-Persidangan Pelajar Peringkat Kebangsaan, 2013.

Ahmad , Tahir (2013) Pendekatan Kabur Intuitionistik dalam Penambahbaikan Imej EEG Datar. In: SKSM 21, 2013.

Jasmi, Kamarul Azmi and Salleh, Norhafizah (2013) Pendekatan Pengajaran dan Pembelajaran Berpusatkan Pelajar dalam Kecemerlangan Guru Cemerlang Pendidikan Islam dan Guru di Sekolah Menengah: Satu Kajian Kes (Teaching and Learning-Centered Approach Student among Islamic Education Outstanding Teacher and Teachers in Secondary Schools: A Case Study). In: 3rd International Conference on Islamic Education 2013 [ICIED2013]), 6th - 7th April 2013, EPF Institute, Kajang, Selangor, Malaysia.

Awang, Ramli (2013) Pendidikan akidah: tinjauan metode pengukuhan menurut Al-Quran. In: Seminar Pendidikan dan Penyelidikan Islam 2013 (SePPIM' 13), 2013.

Muhamad, Hilman and Jasmi, Kamarul Azmi (2013) Penerapan Akhlak Islamiah dalam P&P Guru Matematik di Daerah Kulaijaya, Johor: Satu Kajian Rintis (Islamic Morals application in the Teaching and Learning of Mathematics Teachers in District Kulaijaya, Johor: A Pilot Study). In: Prosiding Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13] (Proceedings of the First Seminar on Islamic Education and Research [SePPIM'13]), 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Yunos, Mohd. Amerul Akmal and Atan, Noor Azean (2013) Pengintegrasian strategi pembelajaran terbalik dalam pembentukan modul pembelajaran fizik. In: 2nd International Seminar on Quality and Affordable Education 2013 (ISQAE 2013), 7th to 10th October 2013, UTM Skudai, Johor, Johor Bahru.

Mohd. Noor, Ahmad Firdaus and Jasmi, Kamarul Azmi (2013) Pensyarah cemerlang pendidikan Islam politeknik: satu kajian kes (Excellent polytechnic lecturer in Islamic education: a case study). In: Prosiding Seminar Pasca Siswazah Fakulti Tamadun Islam Kali Kedua 2013 (Proceedings of the Second Graduate Seminar Faculty of Islamic Civilization 2013), 18-19 Disember 2013, Main Hall, Faculty of Islamic Civilization.

Abdul Rahman , Rosly (2013) Penyediaan gentian optik untuk pelbagai kegunaan: satu pendedahan asas dalam teknologi gentian optic. In: Seminar Kebangsaan Teknologi Makmal Ke-11 (SKETMA), 2013.

Ahmad , Tahir (2013) Penyelesaian alternatif bagi sistem linear kabur sepenuhnya. In: SKSM 21, 2013.

Masroom, Mohd. Nasir and Wan Dagang, Wan Ismail (2013) Peranan ibadah terhadap kesihatan jiwa. In: Seminar Falsafah Sains dan Teknologi, 16 Mei 2013, Skudai, Johor.

Mohd. Kamaruzaman, Fathiyah and Ali, Dayana Farzeeha and Md. Nasir, Ahmad Nabil and Rajuddin, Muhammad Rashid (2013) Perception of the mentally disable trainees towards learning problem faced in Taman Sinar Harapan, Cheras, Malaysia. In: 6th World Conference on Educational Sciences, 2013.

Abdul Latiff, Zulkarnain (2013) Perfomance and emission evaluation of a gasoline engine powered vehicle using Active Intercooler (AIC) device for Kineflux Sdn. Bhd. In: n/a, 2013.

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Abdul Manaf, Azizah (2013) Performance analysis in reactive routing protocols in wireless mobile ad hoc networks using DSR, AODV and AOMDV. In: International Conference on Informatics and Creative Multimedia 2013 (ICICM2013), 2013.

Che-Aron, Z. and Abdalla, A. H. and Abdullah, K. and Hassan, W. H. (2013) Performance analysis of multi-radio routing protocol in cognitive radio ad hoc networks under different path failure rate. In: 5th International Conference on Mechatronics ICOm'13, 2013.

Abdul Majid, Zulkifli (2013) Performance and emission characteristics of a diesel dual fuel engine operated on biodiesel from waste cooking oil. In: National Conference On Industry-Academia Initiatives In Biotechnology , 2013.

Abbas, M. and Yusof, N. H. M. and Fisal, N. (2013) Performance evaluation of binary spray and wait oppnet protocol in the context of emergency scenario. In: 2013 IEEE International Conference On Pervasive Computing And Communications Workshops, Percom Workshops 2013.

Wai, Loan Liew and Kassim, Mohd. Azraai and Muda, Khalida and Soh, Kheang Loh and Abdullah @ Aziz, Norliana (2013) Performance evaluation of Industrial Effluent Treatment Systems (IETSS) an insight for biotechnology advances in agro-based wastewater treatment. In: Innovation Challenges In Multidisciplinary Research and Practice (ICMRP), 2013.

Aung, Lwin Moe (2013) Performance evaluation of jeep suspension using quarter and half car models. In: the Fourth international Conference on Science and Engineering , 2013.

Rozaini, Ahmad Humaizi and Ishak, Mohd. Razmi and Abu Bakar, Abd. Rahim and Mohd. Zain, Mohd. Zarhamdy (2013) Performance of a fully mechanical parking brake system for passenger cars. In: Iop Conf. Series:Materials Science and Engineering 50 (2013), 2013.

Anuar, Aznah Nor (2013) Performance of aerobic granular sludge sequencing batch reactor treating rubber wastewater at different hydraculis retention time. In: 5th IWA-ASPIRE Conference & Exhibition, 08 - 12 September 2013, Daejeon, Korea.

Rozaini, Ahmad Humaizi and Ishak, Mohd. Razmi and Quettier, Nicolas and Abu Bakar, Abd. Rahim and Mohd. Zain, Zarhamdy (2013) Performance of an Electro-Mechanical Parking Brake (EMPB) system. In: 4Th International Conference on Mechanical and Manufacturing Engineering (ICME 2013), 2013.

Lim, S. P. and Haron, H. (2013) Performance of different techniques applied in genetic algorithm towards benchmark functions. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Yaziz, Siti Roslindar and Azizan, Noor Azlinna and Zakaria, Roslina and Ahmad, Maizah Hura (2013) The performance of hybrid arima-garch modeling in forecasting gold price. In: The 20th International Congress on Modelling and Simulation (MODSIM 2013) , 2013.

Shaharuddin, N. A. and Idrus, S. M. and Isaak, S. (2013) Performance of large signal model heterojunction bipolar transistor INP/INGAAS an optoelectronic mixer. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Chong, K. C. and Lai, S. O. and Lee, K. M. and Lau, W. J. and Ooi, B. S. (2013) Performance of surface modification of polyvinylidene fluoride hollow fiber membrane in membrane distillation. In: Advanced Materials Research.

Nasution, Henry and Yamani, M. H. Z. and Sumeru, K. (2013) Performance study of DC compressor for automotive air conditioning system. In: Advances In Power And Electrical Engineering, Pts 1 And 2.

Jayos, Samsiah and Jasmi, Kamarul Azmi (2013) Perkhidmatan bimbingan dan kaunseling di kalangan klien saudara baru. In: Prosiding Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13] (Proceedings of the First Seminar on Islamic Education and Research [SePPIM'13]), 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Ahmad , Tahir (2013) Permodelan ruang keadaan untuk teras reaktor di dalam reaktor air bertekanan. In: SKSM 21, 2013.

Jayos, Samsiah and Jasmi, Kamarul Azmi (2013) Persepsi kaunselor bukan Islam terhadap perkhidmatan kaunseling dengan klien saudara baru. In: Prosiding Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13] (Proceedings of the First Seminar on Islamic Education and Research [SePPIM'13]), 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Hushim, M. F. and Alimin, A. J. and Selamat, H. and Muslim, M. T. (2013) PFI retrofit-kit as green technology for small 4-stroke s.i. engine. In: Applied Mechanics And Materials.

Abdul Rahman, Rosly (2013) Phase transformation of synthesized titania thin films at low temperature. In: International Conference on Solid State Physics, 2013.

Alizadehash Rafi, Behnam (2013) Photorealistic and procedural texturing based on dynamic pulse function. In: Sensors and Models in Photogrammetry and Remote Sensing (SMPR), 2013.

Ashraf, Mahmood A. and Ghazali, Masitah (2013) Physicality quantitative evaluation method. In: Proceedings of the 25th Australian Computer-Human Interaction Conference (OzCHI 2013), 25 November 2013 through 29 November 2013, Adelaide, SA; Australia.

Abdul Majid, Zaiton (2013) Physico-chemical characterization of natural zeolite-iron composite adsorbent for removal of paraquat in water. In: 26th Regional Symposium of Malaysia analytical Sciences (SKAM 26), 2013., 2013.

Tuan Kamaruddin, Tengku N A and Intan Zaurah, Mat Darus (2013) PID controller for idle speed control. In: Proceedings - UKSim 15th International Conference on Computer Modelling and Simulation, UKSim 2013, 10-12 April 2013, Cambridge, UK.

Andromeda, Trias and Yahya, Azli and Samion, Syahrullail and Baharom, Ameruddin and Hashim, Nor Liyana (2013) PID controller tuning by differential evolution algorithm on EDM servo control system. In: Applied Mechanics and Materials Vols. 284-287 (2013).

Abang Zaidel, Dayang Norulfairuz (2013) Plant protein hydrolysates from soy and rice as a supplement for medium in cell culture. In: International Conference on Agricultural, Biotechnology, Biological and Biosystems Engineering 2013, 2013.

Ariffin, Aini Suzana (2013) Policy transformation from public sector agency to business entity: lesson learnt in implementing corporatisation policy by government linked research & Technology organisations in Malaysia. In: Proceedings Book of ICEFMO, 2013, Malaysia : Handbook on the Economic, Finance and Management Outlooks, 2013, Pearl International Hotel, Kuala Lumpur, Malaysia.

Adrus, Nadia and Ayub, Nur farizah and Ulbricht, Mathias (2013) Poly(N-Isopropylacrylamide) hydrogel networks and sieving characteristics. In: International Conference on Separation Technology (ICoST 2013), 2013, 19-21 Sept 2013.

Ali, Rusmidah (2013) Polymolybdate based catalysts in oxidative desulfurization of diesel fuel with TBHPDMF system. In: The 3rd Academic Conference on Natural Science for Master and PhD Students for ASEAN countries (CASEAN-2013), 11-15 Nov. 2013., 2013, Royal University of Phnom Penh.

Shika, Suleiman Aliyu and Sapri, Maimunah and Jibril, D. J. and Abdullah, Shahabudin and Wakawa, Usman Bukar and Umar, Aminu and Umar, Usman Aminu (2013) Post occupancy evaluation sustainability assessment framework for commercial office buildings. In: International Congress on Interdisciplinary Behavior and Social Science, 2013.

Ali , Mohamad Bilal (2013) Potensi teknologi augmented reality dalam pembelajaran sains: satu tinjauan terhadap penyelidikan lepas. In: 2nd International Seminar On Quality And Affordable Education (ISQAE 2013), 2013.

Anshar, Muhammad and Ani, Farid Nasir and Kader, Ab. Saman (2013) The potential energy of plastic solid waste as an alternative fuel for power plants in Indonesia. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Khalid, C.M.L. and Mohamed, Z. and Fathi, M. S. and Zakiyudin, M. Z. and Muhamad Rawai, N. and Abedi, M. (2013) The potential of augmented reality technology for pre-construction. In: Applied Mechanics And Materials.

Zakiyudin, M. Z. and Fathi, M. S. and Rambat, S. and Mohd Tobi, S. U. and Kasim, N. and Ahmad Latiffi, A. (2013) The potential of context-aware computing for building maintenance management systems. In: Applied Mechanics And Materials.

Oluwasola, Ebenezer and Hainin, Mohd. Rosli and Aziz, M. M. A. and M. Warid, M. Naqiuddin (2013) Potentials of steel slag and copper mine tailings as construction materials: a review. In: 1st International Conference on the Science & Engineering of Materials (ICoSEM 2013), 2013.

Rahman, A. F. A. and Selamat, H. and Ismail, F. S. (2013) Power consumption modeling for indoor environment using artificial neural network. In: Applied Mechanics And Materials.

Rosmin, N. and Watson, S. J. and Musta'amal, A. H. (2013) Power optimization for a variable-speed stall-regulated wind-turbine using scalar control. In: 4th International Conference on Clean Electrical Power: Renewable Energy Resources Impact, ICCEP 2013.

Rosmin, Norzanah and Watson, Simon and Musta'amal, Aede Hatib (2013) Power optimization for a variable-speed stall-regulated wind-turbine using scalar control. In: Power optimization for a variable-speed stall-regulated wind-turbine using scalar control, 11-13 June, 2013, Alghero, Italy.

Abdul Hamid, Abdul Rahim and Singh, Bachan and Abdullah, Athira (2013) The practices of corporate social responsibility among construction companies in Malaysia. In: The 9th International Conference of Geotechnical & Transportation Engineering (Geotropika) and The 1st International Conference on Construction and Building Engineering (ICONBUILD 2013), 2013.

Abd Hamid, Abu Bakar (2013) Practices of Green Supply Chain Management (GSCM) towards manufacturing sustainability. In: International Conference on Education, Research and Innovation, Brunei, 2013.

Ali Khan , Mohd. Noor Azli (2013) Praktis semasa penggunaan Bahasa Melayu dalam laporan tahunan. In: World Conference on Integration of Knowledge (WCIK) 2013, 2013.

Sulaiman, Nurul Jannah and A. Rahman, Roshanida and Ngadi, Norzita (2013) Precipitation of cellulase and xylanase for cross-linked enzyme aggregates. In: International Conference on separation Technology, Icost, 2013.

Alifiah, Mohd. Norfian (2013) Prediction of financial distress companies in malaysia: a comparison between consumer products and indistrial products sector. In: 2nd International Conference on Management, Economics and Finance 2013, 2013.

Alifiah, Mohd. Norfian (2013) Prediction of financial distress companies in the trading and services sector in Malaysia using macroeconomic variables. In: International Conference on Innovation, Management and Technology Research 2013, 2013.

Mohamad, M. A. and Ali, N. A. and Sallehuddin, R. and Haron, H. (2013) Prediction of hardness in tia1n coating process using support vector machine. In: Proceedings of the 3rd IASTED Asian Conference on Modelling, Identification, and Control, AsiaMIC 2013.

Abu, Aminudin (2013) A prediction of noise reduction of exhaust muffler system. In: the Fourth international Conference on Science and Engineering (ICSE 2013), 2013.

Mohebbi, Keyvan and Ibrahim, Suhaimi and Idris, Norbik Bashah (2013) Prediction of relevance between requests and web services using ann and LR models. In: 5th Asian Conference on Intelligent Information and Database Systems (ACIIDS), MAR 18-20, 2013, Kuala Lumpur, Malaysia.

Jaapar, S. Z. S. and Morad, N. A. and Iwai, Y. (2013) Prediction of solubilities for ginger bioactive compounds in hot water by the cosmo-rs method. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013).

Mohd. Adnan, M. R. H. and Mohd Zain, Azlan and Haron, Habibollah (2013) Prediction of surface roughness in the end milling machining using fuzzy rule-based. In: Applied Mechanics and Materials (Volume 421).

Yazid, A. W. M. and Sidik, N. A. C. (2013) Prediction of the flow around a surface-mounted cube using two- equation turbulence models. In: Applied Mechanics And Materials.

Bakhary , Norhisham (2013) Prediction of unmeasured modal data using statistical multi-stage ann fordamage detection: an experimental verification. In: 15th Asia Pacific Vibration Conference, 2013.

Mohd. Faudzi, Ahmad 'Athif (2013) Predictive functional control design for pneumatic actuator with stiffness characteristic. In: 2013 IEEE/SICE International Symposium on System Integration, 15-17 December 2013, Kobe International Conference Center, Kobe Japan, 2013, Kobe Japan.

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Muhd Razali and Abd Rahman, Md Nizam and Hassan Basari, Abd Samad (2013) Predictive modeling of tin coating roughness. In: Advanced Materials Research, NOV 28-30, 2012, Penang, Malaysia.

Alel, Mohd. Nur Asmawisham and Ghafar, M. and Ramly, N. and Adnan, A. (2013) Preliminary seismic vulnerability assessment of Kundasang, Sabah, Malaysia. In: Conference Geotropika & Icon Build 2013 (GEOCON2013) - Paper 1, 2013.

Marwoto, P. and Made, D. P. N. and Sugianto, Sugianto and Wibowo, E. and Othaman, Z. and Astuti, S. Y. and Aryani, N. P. (2013) Preliminary study of CDTE and CDTE:CU thin films nanostructures deposited by using DC magnetron sputtering. In: AIP Conference Proceedings.

Taib, I. and Osman, K. and Hermawan, H. and Abd. Kadir, M. R. (2013) Preliminary study on the comparable flow pattern between stented and non-stented aneurysm at hypertension condition. In: Applied Mechanics And Materials.

Hezmi, Muhammad Azril and Zahari, Mohd. Zakri and Sa’ari, Radzuan (2013) Preliminary study on water retention behaviour of compacted koalin. In: The 9th International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), 2013.

Toh, Tien Choon and Lim, Cheng Sim and Ting, Connie and Ali, Kherun Nita and Aliagha, Godwin Uche and Goh, Kai Chen (2013) A preliminary survey of factors influencing project cost estimating practice in the Klang Valley of Malaysia. In: The 2nd International Conference on Mechanical Engineering, Materials Science and Civil Engineering (ICMEMSCE2013), 2013.

Laftah, W. A. and Hashim, S. (2013) Preparation and possible agricultural applications of polymer hydrogel composite as soil conditioner. In: Advanced Materials Research.

A. R. , Roshanida (2013) Preparation of cross-linked enzyme aggregates from cellulase and xylanase. In: CUTSE International Conference, 2013.

Azhim, Azran and Ono, T. and Fukui, Yasuhiro and Morimoto, Yuji and Furukawa, K. and Ushida, T. (2013) Preparation of decellularized meniscal scaffolds using sonication treatment for tissue engineering. In: 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS 2013, 3rd-7th July 2013, Osaka, Japan.

Abd. Jalil, Aishah (2013) Preparation of mesostructured silica nanoparticles loaded with Zno and their photocatalytic activity. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), Desaru, Johor Bahru, 9-10th December 2013, 2013, Desaru, Johor Bahru.

Abd. Halim, Z. and Mohd. Ali, N. M. (2013) The probability of nth degree for some nonabelian metabelian groups. In: AIP Conference Proceedings.

Mohd. Yusof, Khairiyah and Abdul Hamid, Mohd. Kamaruddin and Hassim, Mimi Haryani and Harun, Saharudin and Syed Hassan, Syed Ahmad Helmi (2013) Problem based learning for process control and dynamics, part 1: effective planning for a typical course. In: 6th International Conference on Process Systems Engineering - PSE Asia 2013, 2013.

Elhag, A. A. M. and Elshaikh, M. A. and Mohamed, R. and Babar, M.I. (2013) Problems and future trends of software process improvement in some sudanese software organizations. In: Proceedings - 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013.

Ahmad, Ummul Khair (2013) Process vs product approach of teaching writing in Malaysian schools. In: 22nd Malaysian English Language Teaching Association International Conference (MELTA 2013), 2013.

Akmar Zakoria, Zainul (2013) Production and characterization of prodigiosin from serrotio marcescens UTMI using brown sugar as growth medium. In: The Sixth annual Conference on the Challenges in Environmental Science and Engineering (CESE 2013), 2013.

Akira, Kikuchi (2013) Production of sugarcane bagasse activated carbon for Cd (Ii) removal using response surface method. In: 4Th International Graduate Conference on Engineering, Science and Humanities , 2013.

Aspar, Zulfakar (2013) Programmable logic controller for industry automation. In: 1st National Conference On Knowledge Transfer (KTP 01), 2013.

Jaya, R. P. and Muhamad Nor, M. A. A. and Ahmad, Z. A. and Mohd. Amin, Z. (2013) Properties of mortar containing rice husk ash at different temperature and exposed to aggressive environment. In: Advanced X-Ray Characterization Techniques.

Yaacob, H. and Hainin, M. R. and Chang, F. L. (2013) Properties of single face compacted porous asphalt. In: Applied Mechanics And Materials.

Mohd. Faudzi, Ahmad 'Athif and Osman, Khairuddin and M.F., Rahmat and Din Mustafa, Nu’man and Zainal Abidin, Amar Faiz and Suzumori, Koichi (2013) Proportional-integrative controller design of pneumatic system using particle swarm optimization. In: IEEE Student Conference on Research & Development 2013, 16-17 December 2013, Palm Garden Hotel, Putrajaya, Malaysia, 2013, Palm Garden Hotel, Putrajaya, Malaysia.

Ahmad, Mohd. Hamdan (2013) A proposal for recycling municipal solid waste incinerator bottom ash as a feasible supplementary thermal insulator in Malaysia Climate. In: Asia Future Conference 2013 (AFC13), 2013.

Ali, Mohd. Fadzli and Joyes, Gordon and Ellison, Linda (2013) Proposing the third generation of an aligned activity system as a theoretical framework in blended learning research. In: 2nd International Conference on Interactive Digital Media (ICIDM 2013), 2013.

Sutan Ahmad Nawi, Haslinda and Ibrahim, Othman and Abdul Rahman, Azizah (2013) Public e-service sustainability failure factors: an exploratory study. In: Pacific Asia Conference on Information Systems(PACIS) 2013, 2013.

Ali Khan, Mohd. Noor Azli and Lee, Han Siang (2013) Public investor perception towards internet financial reporting in Malaysia. In: World Conference on Integration of Knowledge (WCIK) 2013, 2013.

Abdul Wahid, Mazlan and Dairobi, Ahmed G. and Saat, Aminuddin and Mohd. Sies, Mohsin and Mohammed, Hussein A. and Darus, Amer Nordin and Mohd. Faizal, Hasan and Mohd. Ibthisham, Ardani and Mohd. Yasin, Mohd. Fairus (2013) Pulse detonation engine research development at high speed reacting flow laboratory - hiref, Universiti Teknologi Malaysia. In: Applied Mechanics And Materials.

Folorunso, Taliha Abiodun and Ismail, Fatimah Sham (2013) Pump scheduling optimization model for water supply system using AWGA. In: 2013 IEEE Symposium on Computers & Informatics (ISCI), 7th-9th April 2013, Langkawi, Malaysia.

Abu @ Hussin, Mohd. Fauzi and Abd. Wahab, Kalsom and Johari, Fuadah and Haji Alias, Mohammad and Ab. Aziz, Muhammad Ridhwan and Kefli @ Zulkifli, Zurina and Ahmad, Nursilah (2013) Push and pull factors influencing waqifs to contribute cash waqf to waqf institutions in Malaysia. In: World Universities Islamic Philanthropy Conference 2013 (WUIPCON 2013), 2013.

Wan Fakhruddin, Wan Farah Wani and Attan, Anie (2013) Putting knowledge gained into practice in civil engineering lab reports. In: Akdeniz Language Studies Conference.

Abdul Rahim, Abd. Rahman (2013) PV thermal progress: research and applications. In: Proceedings of The 3Rd International Conference of Saving Energy In Refrigeration and Air-Conditioning, 2013.

Zeshan, Furkh and Mohamad, Radziah and Ahmad, Mohammad Nazir (2013) Quality of service ontology languages for web services discovery: an overview and limitations. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

A Rashid, Ahmad Safuan (2013) Quantifying pavement interface bond strength trought different approaches : a compiliation of testing device. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

Ahmad, Arshad (2013) Quantitative risk assessment of hydrogen infrastructure: comparison of on-site and off-site fuelling stations. In: 4th int Conf Fuel Cell & Hydrogen Technology, 7-10 Oct 2013, 2013, Jogjakarta.

Mohammad, Shahrin (2013) Quick installation composite slab system for pre-fabricated structures. In: Proceedings on sustainable built environment, March,2013, 2013, Hanoi.

Abdul Azeez, Yusuf and Ebrahimi, Mansoureh and Saliu Ishola, Abdullahi and Surajudeen, Ahmad Tijani (2013) The Quranic perspective on the science of water transportation. In: Proceeding Seminar on Islam, Science and Technology 2013, 2013.

Ibrahim, I. M and Purnamirza, T. and Abdul Rahman, Tharek and Sabran, M. I. (2013) Radial line slot array antenna development in Malaysia. In: 7th European Conference on Antennas and Propagation (EuCAP), APR 08-12, 2013, Gothenburg, SWEDEN.

M. Yunus, Arif A. and Mohamed Murid, Ali Hassan and Nasser, Mohamed M. S. (2013) Radial slits maps of unbounded multiply connected regions. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Kesavan, Ulaganathen and Abdul Rahman, Tharek and Rafiqul Islam, Md D. (2013) Rain attenuation prediction using frequency scaling technique at tropical region for terrestrial link. In: Progress In Electromagnetics Research Symposium.

Rezaie, Vahideh and Ahmad, Tahir and Maan, Normah and Awang, Siti Rahmah and Khanmohammadi, Masumeh (2013) Ranking the multiple intelligences of people with epilepsy using analytical hierarchy process and data envelopment analysis. In: Journal Of Emerging Technologies In Web Intelligence.

Nakisa, Mehdi and Abdul Malik, Adi Maimun and M. Ahmed, Yasser and Sian, A.Y. and Priyanto, A. and Jaswar, Jaswar and Behrouzi, F. (2013) RANS simulation of the viscous flow around hull of LNG. In: The 15th International Conference on Mathematical and Computational Methods in Science and Engineering (MACMESE '13), 2013.

Borhani, Tohid Nejad Ghaffar and Akbari, Vahid and Abd. Hamid, Mohd. Kamaruddin and Abdul Manan, Zainuddin (2013) Rate-based simulation of dea promoted potassium carbonate process. In: 6th International Conference on Process Systems Engineering - PSE Asia 2013, 2013.

Ling, F. N. L. and Kassim, K. A. and Abdul Karim, A. T. (2013) Reaction products of lime zeolite stabilized kaolin humic acid. In: Applied Mechanics And Materials.

Ismail, Nadirah and Abdul Majid, Zaiton and Aris, Azmi and Ibrahim, Zaharah (2013) Reactive black 5 sorption by ananas comosus leaf powder. In: 26th Regional Symposium of Malaysia analytical Sciences (SKAM 26), 2013., 4-5 December 2013, Kuching, Sarawak.

Hematian, Amirshahram and T. Chuprat, Suriayati and Abdul Abdul Manaf, Azizah and Yazdani, Sepideh Foroozan and Parsazadeh, Nadia (2013) Real-time FPGA-based human iris recognition embedded system: zero-delay human iris feature extraction. In: 9th International Conference on Computing and Information Technology, IC2IT 2013, 9 May 2013 through 10 May 2013, Bangkok, Thailand.

Ahmad , Arshad (2013) Realizing the hydrogen economy - a safety perspective. In: 4th Int Conf Fuel Cell & Hydrogen Technology, Yogjakarta 7-10 Oct 2013, 2013, Yogjakarta.

Iddi, H. U. and Kamarudin, M. R. and Rahman, T. A. and Dewan, R. (2013) Reconfigurable monopole antenna for WLAN/WIMAX applications. In: Progress In Electromagnetics Research Symposium.

Mohd. Daud, Zalina and Abas, Norzaida (2013) A regionalized spatial temporal model for hourly rainfall process. In: International Conference on Computing, Mathematics and Statistics, 2013.

Mohamad Jan, Nurhidaya and Fong, Wan Heng and Sarmin, Nor Haniza (2013) Regular languages, regular grammars and automata in splicing systems. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B, 18 December 2012 through 20 December 2012, Putrajaya; Malaysia.

Basha, M. and Azwadi, N. C. S. (2013) Regularized lattice boltzmann simulation of laminar natural convection in entrance region of 2D channels. In: Mechatronics And Computational Mechanics.

Ahmad, M. F. and Ariff, M. S. M. and Zakuan, N. and Takala, J. and Jusoh, A. (2013) Relationship amongst TQM, business performance, tools and techniques: qualitative study result. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Nakhaei, Habibollah and Hamid, Nik Intan Norhan (2013) The relationship between economic value added, return on assets, and return on equity with market value added in Tehran stock Exchange (TSE). In: Proceedings of Global Business and Finance Research Conference28-29 October, 2013, Howard Civil Service International House, Taipei, Taiwan, 2013, Taiwan.

A Rashid, Ahmad Safuan (2013) Relationship between liquidity index and strength of stabilised laterite. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

Abdul Aziz, Roseni and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri and Adeyemi, Ademola James and Omar, N. (2013) Relationship between working postures and msd in different body regions among electronics assembly workers in Malaysia. In: 2013 IEEE international Conference on industrial Engineering & Engineering Management, 10-13 Dec, 2013, 2013, Bangkok, Thailand.

Abdul Hamid, M. and Mohd. Ali, N. M. and Sarmin, N. H. and Abd. Manaf, F. N. (2013) Relative commutativity degree of some dihedral groups. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Hosseinian, Seyyed Shahab and Jabbrani Torghabeh, Zahra and Ressang, Aziruddin (2013) Relative importance of factors affecting construction hazards in the design phase. In: Applied Mechanics and Materials (Volume 330).

Jabbarani Torghabeh, Zahra and Hosseinian, Seyyed Shahab and Ressang, Aziruddin (2013) Relative importance of hazards at construction sites. In: Applied Mechanics and Materials (Volume 330) June 2013, Zurich.

Md. Yusof, Aminah and Chai, Chang Saar (2013) Relative poor and accessibility to home ownership in the city of Kuala Lumpur, Malaysia. In: Social Sciences And Society.

Mohamad, Syamsul Bahri and Chee, Yen Leow and Abd. Rahman, Tharek (2013) Relay placement for inter-band carrier aggregation with asymmetrical coverage. In: 2013 IEEE Symposium on Wireless Technology & Applications (ISWTA), 2013.

Yahya, N. N. and Hashim, Mazlan and Ahmad, S. (2013) Remote sensing of shallow sea bottom for digital earth environment. In: 8th International Symposium of Digital Earth, 2013.

Yazdani, Z. and Naderipour, A. and Kamsah, M. Z. (2013) Renewable energy and carbon footprint emission at University Technology Malaysia (UTM). In: Advanced Materials Research.

Hassannuddin, I. A. and Dahlan, H. M. and Che Hussin, A. R. (2013) Requirement of knowledge centre based on web analysis. In: 2013 International Conference of Information and Communication Technology, ICoICT 2013.

Safdar, Hashim and Fisal, Norsheila and Ullah, Rahat and Maqbool, Wajahat and Khalid, Zubair (2013) Resource allocation for uplink M2M communication in multi-tier network. In: 2013 IEEE 11th Malaysia International Conference on Communications (MICC 2013), 26 November 2013 through 28 November 2013, Kuala Lumpur; Malaysia.

Abdul Rahim, Rabiah Eladwiah and Abdul Rahman, Azizah (2013) Resource-based framework of green IT capability toward firms’ competitive advantage. In: Pacific Asia Conference on Information Systems(PACIS) 2013, 2013.

Awang, Ramli (2013) Respons terhadap kegagalan tamadun sains barat: satu tanggapan. In: Seminar Kebangsaan Isu Ketamadunan dan Cabaran Semasa (SIKCAS), 2013.

Sahlan, S. and Wahab, N. A. and Darus, I. Z. M. (2013) Results on frequency weighted model reduction techniques of activated sludge process. In: UKSIM-AMSS 15Th International Conference On Computer Modelling And Simulation (UKSIM 2013).

Zarei, R. and Monemi, A. and Marsono, M. N. (2013) Retraining mechanism for on-line peer-to-peer traffic classification. In: Intelligent Informatics.

Nasution, Henry and Abdul Latiff, Z. and Aziz, A. A. and Mohd Perang, M. R. (2013) Retrofitting R-22 split type air conditioning with hydrocarbon (HCR-22) refrigerant. In: Applied Mechanics And Materials.

Abdul Hassan, Norhidayah (2013) A review of waste oil application in pavement materials. In: 9th International Conference of Geo-Technical & Transportation Engineering(GEOTROPIKA), 2013.

Ab Muis, Zarina (2013) A review on energy efficiency, renewable energy and nuclear energy in Malaysia. In: Postgraduate Colloquium For Environmental Research 2013 (POCER 2013), 2013.

Ahmad Shukor, Nur Syufiza and Abdul Rahman, Azizah and Iahad, Noorminshah (2013) A review on knowledge audit process. In: The Pacific Asia Conference on Information Systems (PACIS ) 2013, 2013.

Abd. Aziz, Hazlinda and Rasidi, Mohd. Hisyam (2013) Review on methodology of modeling green space network in urban landscape planning. In: Proceeding South East Asia Symposium (SEATUC 7th), 4-6 March, 2013, Bandung, Indonesia.

Anuar, Aznah Nor (2013) A review on the development and application of aerobic granular sludge for wastewater treatment. In: Water Malaysia 2014, 2013.

Amrin, Astuty (2013) A review on the effect of alloying elements and heat treatment on the mechanical properties of Ti-6Al-4V as structural materials. In: 3rd International Conference on Advancement of Materials and Nanotechnology, 2013.

Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and Adnan, Abbas Mukhtar and Abdul Hassan, Norhidayah and Jaya, Ramadhansyah Putra and Liu, Hong Y. (2013) A review on the performance of modified asphalt binder with tire rubber powder. In: A Joint Conference of International Conference in Geotechnical and Transportation Engineering (9th GEOTROPIKA) and International Conference of Innovative Construction and Buildings (1st ICONBUILD), 2013.

Nor, N. A. M. and Jaafar, Juhana and Othman, Mohd. Hafiz Dzarfan and Abd. Rahman, Mukhlis (2013) A review study of nanofibers in photocatalytic process. In: 11th International Conference on Membrane Science and Technology 2013, 2013.

Samsuri , Noor Asmawati (2013) Rfid based system for malaysian pilgrims identification and monitoring through Gsm. In: 5th National Seminar of Hajj Best Practices on Crowd & Health Issues, 2013.

Abdullah, M. E. and Zamhari, K. A. and Shamshudin, M. K. and Hainin, M. R. and Satar, M. K. I. M. (2013) Rheological properties of asphalt binder modified with chemical warm asphalt additive. In: Advanced Materials Research.

Yen, Kien Min and Magee, Allan Ross and Aramanadka, Shankar Bhat and Abdul Malik, Adi Maimun and Abdul Ghani, Mohamad Pauzi and Haji Ismail, Nasrudin and Ahmad Zukni, Norbahrain and Teng, Yih Jeng (2013) Riser VIV suppression device tests for application to a southeast asia TLP. In: Proceedings of the ASME 2013 32nd International Conference on Ocean, offshore and Arctic Engineering OMAE2013, 2013.

Jabbarani Torghabeh, Zahra and Hosseinian, Seyyed Shahab. and Ressang, Aziruddin (2013) Risk assessment of ergonomic risk factors at construction sites. In: Applied Mechanics and Materials (Volume 330).

Ahmad , Arshad (2013) Risk assessment of on-site hydrogen refuelling station using dynamic accident modelling approach. In: 4th Int Conf Fuel Cell & Hydrogen Technology, Jogjakarta 7-10 Oct 2013, 2013, Yogjakarta, Indonesia.

Hassan, Zulkifly and Abu Husain, Mohd. Khairi (2013) Risk-based asset integrity management for offshore floating facilities in Malaysia. In: Proceedings of the 2nd International Conference on Engineering Business Management 2013 (ICEBM 2013), 2013.

Esmaeeli, H. and Abbaszadehfallah, I. and Chepuan, O. B. and Hosseini, S. H. (2013) Road accident analysis factors. In: Applied Mechanics And Materials.

Ho, Chin Siong and Sinniah, Gobi Krishna (2013) A roadmap towards low carbon Iskandar Malaysia 2025. In: Sympoisum on LCS on 30 October 2013 , 2013.

Musdholifah, Aina and Mohd Hashim, Siti Zaiton (2013) Robust local triangular kernel density-based clustering for high-dimensional data. In: 2013 5th International Conference on Computer Science and Information Technology, CSIT 2013 - Proceedings, MAR 27-28, 2013, Amman, Jordon.

Ismail, Ahmad Fauzi and Goh, P. S. (2013) The role and prospect of nanomaterials in polymeric membrane for water and wastewater treatment: a state-of-the-art overview. In: International Conference on Advanced Materials Science and Technology, ICAMST 2013, 17-18 Sep, 2013, Yogyakarta, Indonesia.

Yusuf, G. A. and Mohamed, S. F. and Yusof, Z. M. and Misnan, M. S. (2013) Role of building services quantity surveyors in managing cost of green buildings. In: Advanced Materials Research.

Hosseini, S. E. and Wahid, M. A. and Abuelnuor, A. A. A. (2013) The role of exhaust gas recirculation in flameless combustion. In: Applied Mechanics And Materials.

Abdul Awal, A.S.M. and Mohammad, Shahrin and Mazlan, Dianah (2013) The role of expanding admixture in the development of strength of prepacked concrete. In: Proceedings of The Thirteenth East Asia Pacific Conference on Structural Engineering and Construction (Easec-2013), 2013.

Yaakob, Y. and Yusop, M. Z. and Takahashi, C. and Kalita, G. and Ghosh, P. and Tanemura, M. (2013) Room-temperature fabrication of au- and ag-incorporated carbon nanofibers by ion irradiation and their field emission properties. In: Japanese Journal Of Applied Physics.

A Samah, Azurah (2013) Rostering work schedules for medical doctors using evolutionary algorithm. In: The Second ICT International Student Project Conference (ICT-ISPC), 2013, 2013.

Adrus, Nadia and Ulbricht, Mathias (2013) The rubber elasticity of poly(n-isopropylacrylamide) hydrogel networks. In: Advanced Materials Research.

Abu Bakar, Najwa and Selamat, Ali (2013) Runtime verification of multi-agent systems interaction quality. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Awang, Ramli (2013) Sains dan teknologi: wacana histriografi dalam gagasan humanisasi dan Islamisasi. In: Seminar on Islam, Science & Technology 2013, 2013.

Sukmana, Irza and Djuansjah, J.R.P. (2013) Sandwiched polymer fibre in fibrin in matrices for the dictation of endothelial cells undergoing angiogenesis. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013), 24 January 2013 - 25 January 2013, Jakarta; Indonesia.

Mohd Azmi, Nurulhuda Firdaus and Timmis, Jon and Polack, Fiona (2013) Scenario-based modeling to capture requirements for immune inspired profile adaptation. In: 8th International Conference on Information Technology in Asia (CITA), 2013, 1st-4th July 2013, Kota Samarahan, Malaysia.

Siew, C. B. and Abdul Rahman, Alias (2013) A schema-aware encoder for Putrajaya 3D. In: Urban And Regional Data Management, UDMS Annual 2013 - Proceedings Of The Urban Data Management Society Symposium 2013.

Zainal, R. and Mohd. Ali, N. M. and Sarmin, N. H. and Rashid, S. (2013) The schur multiplier and nonabelian tensor square of some groups of p-power order. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Mat Hassim, Hazzirah Izzati and Sarmin, Nor Haniza and Mohd. Ali, Nor Muhainiah and Masri, Rohaidah and Mohd. Idrus, Nor'ashiqin (2013) The schur multipliers of certain bieberbach groups with abelian point groups. In: Proceedings of the 20th National Symposium on Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B, 18-20 December 2012, Putrajaya, Malaysia.

Abdul Malik, Adi Maimun and Rahimuddin, Rahimuddin and Radjali, Radjali (2013) Seakeeping of semi-swath using fin stabilizer with fuzzy logic controller in following seas. In: The International Conference on Marine Safety and Environment 2013 (IMSE 2013), 2013.

Ravan, Rama Roshan and Idris, Norbik Bashah and Mehrabani, Zahra (2013) A secure method against frequency attack for pattern query on encrypted string data. In: 2013 International Conference on Informatics and Creative Multimedia, 2013.

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Abdul Manaf, Azizah and M. Abdullah, Shahidan and Bojnord, Hoda Soltanian and Araghi, Sagheb Kohpayeh (2013) A secure model for prevention of black hole attack in wireless mobile ad hoc networks. In: 12th WSEAS International Conference on Applied Computer and Applied Computational Science (ACACOS '13), 2013.

Mohd. Noor, N. and Mohd. Rijal, O. and Ming, J. T. C. and Roseli, F. A. and Ebrahimian, H. and Kassim, R. M. and Yunus, A. (2013) Segmentation of the lung anatomy for high resolution computed tomography (HRCT) thorax images. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Jasmi, Kamarul Azmi and Che Noh, Mohd. Aderi (2013) Sejarah, kaedah, serta Model Pengajaran dan Pembelajaran al-Quran. In: Bengkel Pemulihan dan Pengayaan Pengajaran dan Pembelajaran (PdP) al-Quran SRA JAWI (Remedial and Enrichment Workshop for Teaching and Learning Quran SRA JAWI), 28-29 October 2013, Lecture Hall, Masjid Negara, Jalan Perdana 50480, Kuala Lumpur.

Hassan, M. F. and Saman, M. Z. M. and Sharif, S. and Omar, B. and Zhang, X. and Badurdeen, F. and Jawahir, I.S. (2013) Selection of product design configuration for improved sustainability using the product sustainability index (prodsi) scoring method. In: Applied Mechanics And Materials.

Khayoon, M. S. and Abbas, Ali and Hameed, B. H. and Triwahyono, Sugeng and Abd. Jalil, Aishah and Harris, Andrew T. and Minett, Andrew I. (2013) Selective acetalization of glycerol with acetone over nickel nanoparticles supported on multi-walled carbon nanotubes. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), Desaru, Johor Bahru, 9-10th December 2013, 2013, Desaru, Johor Bahru.

Abdul Manaf, Azizah and Awang, Nor Fatimah (2013) Self assessment framework for detecting vulnerability in web applications. In: The Third International Conference on digital Information and Communication Technology and its Applications (DICTAP2013), 2013.

Abbas, Mohd. Azwan (2013) Self-calibration for accuracy enhancement of hybrid and panoramic scanners. In: 2nd Joint International Symposium on Deformation Monitoring (JISDM), 2013.

Abbas, M. A. and Setan, H. and Majid, Z. and Lichti, D. D. and Chong, A. K. (2013) A self-calibration of the leica scanstation c10 scanner. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Ahmad, Norasnita (2013) Self-directed learning: student's interest in viewing the learner model. In: 3rd International Conference on Research and Innovation in Information Systems – 2013 (ICRIIS’13), 2013.

Bamasoud, Doaa M. and A. Iahad, Noorminshah and Abdul Rahman, Azizah (2013) Self-efficacy and its impact on academic researchers? Absorptive capacity in smart phone acceptance: conceptual paper. In: 3rd International Conference on Research and Innovation in Information Systems 2013, 2013.

A. Shukor, Khairunnisa and Jasmi, Kamarul Azmi and Mohd. Noor, Ahmad Firdaus (2013) Self-regulated Learning: Motivation and Learning Strategies in the Islamic Education Course among Premier Polytechnic Students in Malaysia Based on Demographic Information. In: Prosiding Seminar Pertama Pendidikan dan Penyelidikan Islam [SePPIM'13] (Proceedings of the First Seminar on Islamic Education and Research [SePPIM'13]), 17-18 September 2013, The Main Hall, Faculty of Islamic Cilization, Universiti Teknologi Malaysia.

Samsudin, S. I. and Rahrnat, M. F. and Wahab, N. A. and Razali, M. C. and Gaya, M. S. and Salim, S. N. S. (2013) A self-tuning decentralized pi control for multivariable plant. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Mat Hussin, Ab. Talib and Intan Zaurah, Mat Darus (2013) Self-tuning PID controller for active suspension system with hydraulic actuator. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 7 April 2013 - 9 April 2013, Langkawi, Malaysia.

Ngajikin, Nor Hafizah and David, Michael and Ching, Tay En Marcus and Yaacob, Maslina and Mohd Haniff Ibrahim, Mohd Rashidi Salim and Idrus, Sevia Mahdaliza and Azmi, Asrul Izam (2013) Sensitivity and response time of an ozone sensor. In: 4th International Conference on Photonics (ICP2013), 2013.

Tajdari, T. and Rahmat, M. F. and Thuku, I. T. (2013) Sensitivity characteristics of electrostatic sensor using finite element modeling. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Abd. Latif, Mohd. Juzaila and Ismail, Noor Rizan Adzwa and Ramlan, Roszaidi and Mahmud, Jamaluddin and Abdul Kadir, Mohammed Rafiq (2013) Sensitivity study of surface curvature in characterisation of cartilage mechanical properties. In: Applied Mechanics And Materials.

Hussin, S. S. and Sudirman, R. (2013) Sensory response through EEG interpretation on alpha wave and power spectrum. In: Malaysian Technical Universities Conference On Engineering & Technology 2012 (MUCET 2012).

Adrus, Nadia (2013) Separation functions of poly(N-isopropylacrylamide) hydrogel. In: International Polymer Technology Conference and Exhibition (IPTCE 2013), 16-17 April 2013, Shah Alam, Malaysia.

Rijal, O. M. and Abdullah, N. A. and Isa, Z. M. and Noor, N. M. and Tawfiq, O. F. (2013) Shape model of the maxillary dental arch using fourier descriptors with an application in the rehabilitation for edentulous patient. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS.

Sarbini, Noor Nabilah and Ibrahim, Izni Syahrizal and Saim, A. Aziz (2013) Shear behaviour of composite slab reinforced with steel fibre concrete topping. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 2013.

Koloor, Seyed Saeid Rahimian and Redzuan, Norizah and Tamin, Mohd. Nasir (2013) Shear-dominated interlaminar fracture process in CFRP composite laminates. In: 9th International Conference on Fracture & Strength of Solids, 9-13 Jun 2013, Jeju, South Korea.

Abdul Malik, Adi Maimun and Nakisa, Mehdi and Mohamed Ahmed, Yasser and Priyanto, Agoes and Koto, Jaswar and Behrouzi, Fatemeh and Ghazanfari, Seyed Alireza (2013) Ship bank interaction effect on soil erosion. In: The International Conference on Marine Safety and Environment 2013 (IMSE 2013), 2013.

Mohamad, Siti Hawa and Idris, M. I. and Abdullah, Hasan Zuhudi and Ismail, Ahmad Fauzi (2013) Short review of ultrafiltration of polymer membrane as a self-cleaning and antifouling in the wastewater system. In: Advanced Materials Research.

Hidayah, Nurul and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Abdullah, Mohd. Ezree (2013) A short review of waste oil application in pavement materials. In: A Joint Conference of International Conference in Geotechnical and Transportation Engineering (9th GEOTROPIKA) and International Conference of Innovative Construction and Buildings (1st ICONBUILD), 2013.

Ahmad, Sufizar and Abdoll Latif, Marziana and Taib, Hariati and Ismail, Ahmad Fauzi (2013) Short review: ceramic foam fabrication techniques for wastewater treatment application. In: Advanced Materials Research.

Ghorbanian, Masoud and Shanmugam, Bharanidharan and Narayansamy, Ganthan and Idris, Norbik Bashah (2013) Signature-based hybrid intrusion detection system (HIDS) for android devices. In: 2013 IEEE Business Engineering And Industrial Applications Colloquium (BEIAC 2013), 7-9 April 2013, Malaysia.

Abd. Talib, Norfahana and Mohd. Setapar, Siti Hamidah and Khamis, Aidee Kamal and Sheikh Ali, Sheikh Imranudin (2013) Silage without supplementation: problems, advantages and lactic acid bacteria green approach. In: World Congress on Engineering (WCE 2013), JUL 03-05, 2013, Imperial Coll London, London, ENGLAND.

Abdul Rahman, Abdul Halim (2013) A simple method of designing low temperature freezer using double stage refrigeration system for small capacity. In: 12th International Conference on Sustainable Energy Technologies, 2013.

A. Rashid, Rozeha and Sayuti, Hamdan and Abdul Latiff, Nurul Mu'azzah and Fisal, Norsheila and Sarijari, Mohd. Adib and Abdul Hamid, Abdul Hadi Fikri and Abd. Rahim, Rozaini (2013) Simple scheduling scheme for smart home and ambient assisted living. In: The Second International Conference on Informatics Engineering & Information Science (ICIEIS2013), 2013.

Abu , Aminudin (2013) Simulation and optimization studies of front and rear upright in a suspension system under static load conditions. In: MJIIT-JUC Joint International Symposium, 2013.

Mohd Ibthisham, A. and Rajoo, S. and Nordin, A. and Wahid, M.A. and Sies, M. M. and Saat, Aminuddin (2013) Simulation of corrected mass flow and non-adiabatic efficiency on a turbocharger. In: 5th International Meeting on Advances of Thermofluids, NOV 12-13, 2012, Bintan Island, INDONESIA.

Abdul Majid, Hairudin and Lau, Kee Wah (2013) Simulation of time response taken by medical responder during radiological and nuclear emergency using DES. In: The Second ICT International Student Project Conference (ICT-ISP) IEEE, 2013, 2013.

Ismail, Razali and Hamid, Fatimah (2013) Simulation of trigate fet with semi-cylindrical channel to reduce corner effect. In: UKSIM-AMSS 15Th International Conference On Computer Modelling And Simulation (UKSIM 2013), 10-12 April 2013, Cambridge, United Kingdom.

Addawiyah, Z. R. and Asiah, M. N. and Rafei, I. I. and Jamail-Nor, M. A. (2013) Simulation panel on conductivity for polarization and depolarization current (PDC) measurement of offline monitoring using labview. In: Applied Mechanics And Materials.

Al-Gailani, Samir A. and Mohammad, Abu Bakar and Shaddad, Redhwan Q. and Jamaludin, Mohd. Y. (2013) Single and multiple transceiver simulation modules for free-space optical channel in tropical Malaysian weather. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium.

Ahmad Khalili, Amelia and Mohd. Basri, Mohd. Ariffanan and Ahmad, Mohd. Ridzuan (2013) Single cell trapping in microfluidic channel via hydrodynamic manipulation. In: 2013 IEEE International Conference on Control System, Computing and Engineering, 2013, Melbourne, Australia.

Has, Z. and Rahmat, M. F. and Husain, A. R. and Ghazali, R. (2013) Sliding mode control with switching-gain adaptation based-disturbance observer applied to an electro-hydraulic actuator system. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Reafee, Waleed and Salim, Naomie (2013) The social network role in improving recommendation performance of collaborative filtering. In: 1st International Conference on Advanced Data and Information Engineering (DaEng 2013), 16-18 December 2013, Kuala Lumpur, Malaysia.

Hassan, Hanita (2013) Social semiotics: realizing destination image by means of cultural representations. In: 2nd International Conference on Humanity, Culture and Society ICHCS 2013, 2013.

Ahmed, J. and Salam, Z. (2013) A soft computing MPPT for PV system based on cuckoo search algorithm. In: International Conference On Power Engineering, Energy And Electrical Drives.

Kamaludeen, Rahma A. and Cheah, Yu N. and Sulaiman, Shahida (2013) Software Maintenance Expert Base Decision Support (SoXDeS) framework. In: 2nd International Conference on Advanced Computer Science Applications and Technologies (ACSAT 2013), 2013.

Ali , Nazri (2013) Soil suction profile due to tree induce suction. In: GEOCON International Conference 2013, Johor Malaysia, 28-30 October 2013 , 2013, Johor Malaysia.

Abdul Rahman, Rosly (2013) Sol-gel based single and multilayer nanoparticle thin films on low temperature substrate PMMA for optical applications. In: International Conference on Solid State Physic, 2013.

Ani, Farid Nasir (2013) Solid waste generation in Malaysia. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 2013.

Al-Hatemi, Samer A. and Mohamed Murid, Ali Hassan and Nasser, Mohamed M. S. (2013) Solving a mixed boundary value problem via an integral equation with adjoint generalized neumann kernel in bounded multiply connected regions. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B.

Selvarajoo, Mathuri and Fong, Wan Heng and Sarmin, Nor Haniza and Turaev, Sherzod (2013) Some characteristics of probabilistic one-sided splicing systems. In: Proceedings Of The 20th National Symposium On Mathematical Sciences (SKSM20): Research In Mathematical Sciences: A Catalyst For Creativity And Innovation, PTS A And B, 18 December 2012 through 20 December 2012, Putrajaya; Malaysia.

Abdullah, Shahabudin and Sipan, Ibrahim and Mohd. Ali, Hishamuddin and Jibril, Dan Jibril and Shika, Suleiman Aliyu (2013) Space management conceptual framework for Higher Education Institute. In: International Congress on Interdisciplinary Behavior and Social Sciences 2013 , 2013.

Ariffin, Azman and Mukhelas, Haziq Kamal and Mar Iman, Abd. Hamid and Mohammad, Izran Sarrazin (2013) Spatial-based sustainability assessment of urban neighbourhoods: a case study of Johor Bahru City Council, Malaysia. In: International Symposium & Exhibition on Geoinformation (ISG 2013), 2013.

Sarmin, N. H. and Barakat, Y. (2013) Specific automorphisms on a 2-generated p-group of class two. In: AIP Conference Proceedings.

Masroom, Mohd. Nasir (2013) Spiritual dimensions in mental health: a preliminary from Islamic overview. In: Fourty International Conference on Social Development and Enviroment Studies 2013, 2013, Selangor, Malaysia.

Mantari, M. H. A. R. and Eldrainy, Y. A. and Jaafar, M. N. M. (2013) Spray characterization of palm olein/diesel blends under various injection pressures. In: Advanced Materials Research.

Cheng, Tung Chong and Hochgreb, Simone (2013) Spray flame study using a model gas turbine swirl burner. In: Applied Mechanics and Materials (Volumes 316-317).

Asri, Z and Singh, Bachan and Abdul Hamid, A.R (2013) Squatter houses in the area of Johor Bahru id 227. In: Proceeding GEOCON 2013, 28th-30th October 2013, Persada Johor International Convention Centre, Johor Bahru, Johor.

Abdul Malik, Adi Maimun (2013) Stability of a compound wing configuration during ground effect. In: The International Conference on Marine Safety and Environment, 2013, Johor Bahru, Malaysia (IMSE 2013), 2013, Johor Bahru, Malaysia.

Ling, F. N. L. and Kassim, K. A. and Abdul Karim, A. T. and Chan, T. W. (2013) Stabilization of artificial organic soil at room temperature using blended lime zeolite. In: Advanced Materials Research.

Mohd. Yunus, Nor Zurairahetty and Yong, Chin Yung and Abdullah @ Aziz, Norliana (2013) Stabilization of laterite soil by canlite. In: 9th International Conference of Geo-Technical & Transportation Engineering (Geotropika) and 1st International Conference on Construction and Building Engineering (Iconbuild) (Geocon), 2013.

Rosmin, N. and Watson, S. J. and Musta'Amal, A. H. (2013) Stall-regulated variable-speed wind turbine simulink model. In: Proceedings of the 2013 IEEE 7th International Power Engineering and Optimization Conference, PEOCO 2013.

Khoo, Li Peng and Adnan, Robiah and Ahmad, Maizah Hura (2013) Standard errors estimation in the presence of high leverage point and heteroscedastic errors in multiple linear regression. In: (ICOWOBAS - RAFSS 2013) 4th International Conference & Workshop on Basic & Applied Science, 2013.

Rezaie, Vahideh and Ahmad, Tahir and Maan, Normah and Awang, Siti Rahmah and Khanmohammadi, Masumeh (2013) State space modeling of a reheater system in power generation plant. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 2013.

Almula, Thamir A. D. M. S. and Sharifi, S. and Sharifishourabi, Gholamali and Gohari, Soheil and Ayob, Amran and Yahya, Mohd. Yazid (2013) Static analysis of stitched sandwich beams with functionally graded foam core. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28 - 29 August 2013, Malacca; Malaysia.

Jabbar, Alaa A. and Sahib, Shahrin and Zamani, Mazdak (2013) Statistical steganalysis of four photo themes before embedding. In: International Conference on Advanced Computer Science Applications and Technologies, ACSAT 2013, 23-24 Dec, 2013, Kuching, Sawarak.

Hainin, Mohd. Rosli (2013) Steel slag utilization: prospects and challenges. In: GECON 2013, 2013.

Samadi, M. and Othman, M. F. and Amin, S. H. M. (2013) Stereo vision based robots: fast and robust obstacle detection method. In: 2013 9th Asian Control Conference, ASCC 2013.

Tan, M. L. and Latif, A. B. and Poh, C. and Duan, Z. (2013) Streamflow modelling by remote sensing: a contribution to digital earth. In: The 8Th International Symposium on Digital Earth, 2013.

Noruzman, A. H. and Ismail, M. and Bhutta, M. A. R. and Yusuf, T. O. and Shehu, I. A. and Hassan, I. O. (2013) Strength and durability characteristics of polymer modified concrete incorporating vinyl acetate effluent. In: Material Design, Processing And Applications, Parts 1-4.

Ghanbaripanah, Afsaneh and Mustaffa, Mohamed Sharif and Ahmad, Roslee (2013) Structural analysis of family dynamics across family life cycle in Iran. In: 3rd World Conference On Psychology, Counseling And Guidance, WCPCG-2012.

Islam, Shumaila and Riaz, Saira and Abdul Rahman, Rosly and Naseem, Shahzad and Ottoman, Zulkafli (2013) Structural and dielectric properties of boron doped and un-doped mullite thin films. In: International Conference on Solid State Physics, 2013.

Wan Shamsuri, Wan Nurulhuda and Hussin, Rosli (2013) Structural and luminescence study of antimony-zinc borophosphate glass doped with iron. In: 2012 National Physics Conference (PERFIK 2012).

Leow, T. Q. and Eeu, T. Y. and Leong, P. M. and Pang, X. G. and Hussin, R. (2013) Structural and luminescence study on titanium doped lead manganese borophosphate glass. In: 2012 National Physics Conference (PERFIK 2012).

Eeu, T. Y. and Leong, P. M. and Pang, X. G. and Ibrahim, Z. and Hussin, R. (2013) Structural study of cadmium lead borophosphate glass. In: 2012 National Physics Conference (PERFIK 2012).

Hua, W. M. and Sum, W. P. and Hussin, R. and Ibrahim, Z. (2013) Structural study on lithium-barium borophosphate glasses using infrared and raman spectroscopy. In: Advanced Materials Research.

Ismail, Sarimah and Zakaria, Wan Zulkhairi and Mohd. Amin, Nor Fadila (2013) Struktur kurikulum program diploma pendidikan lepasan ijazah Pendidikan Teknikal dan Vokasional. In: 2nd International Seminar on Quality & Affordable Education 2013, 2013.

A. Iahad , Noorminshah (2013) Students perceptions on internet services & its role In academic performance. In: Students Perceptions on Internet Services & Its Role In Academic Performance, 2013.

Ali, Rosmah and Salim, Kamilah Radin and Hussain, Noor Hamizah and Haron, Habibah Norehan (2013) Students' ICT conceptions and the challenges in acquiring ICT skills for engineering learning. In: Proceedings of the Research in Engineering Education Symposium 2013, 2013.

Sim, Winnie Siew Li and Arshad, Mohammad Yusof (2013) Students' questions in inquiry- based chemistry classrooms. In: IJER. Vol.2, No.1, Juni 2016..

Mat Lazim, Ahmad Razimi and Abu Bakar, Abd. Rahim and Kchaou, Mohamed (2013) The study of disc brake noise on three different types of friction Materials. In: The 2nd International Conference on Recent Advances In Automotive Engineering & Mobility Research (Recar 2013)Materials, 2013.

M. Zahari, M. Shahrir and Ismail, Shahrul and Ibrahim, Mohd. Zamri and Su, Shiung Lam and Mat, R. (2013) Study of enhanced reactive extraction process using ultrasonication for Jatropha curcas seed. In: Applied Mechanics and Materials, 30-31 Oct, 2013, Melaka, Malaysia.

Ali Khan , Mohd. Noor Azli (2013) A study of financial statement presentation and language usage in Malaysian Annual Report. In: Conference on Management, Enterpreneurship and Technology (COMET) 2013, 2013.

Ibrahim, Zuwairie and Ibrahim, Ismail and Mat Jusof, Mohd. Falfazli and Naim, Faradila and Mohd. Tumari, Mohd. Zaidi and Saealal, Muhammad Salihin and Arshad, Nurul Wahidah and Ghazali, Kamarul Hawari and Md. Yusof, Zulkifli and Khalil, Kamal and Abdul Rahim, Muhammad Arif and Abdul Wahab, Norhaliza and Nawawi, Sophan Wahyudi (2013) A study of the contribution of nearest-neighbour thermodynamic parameters to the DNA sequences generated by ant colony optimisation. In: The 5th International Conference on Modelling, Identification and Control (ICMIC 2013), 2013.

Ibrahim, Z. and Ibrahim, I. and Jusof, M. F. M. and Naim, F. and Tumari, M. Z. M. and Saealal, M. S. and Arshad, N. W. B. and Ghazali, K. H. and Yusof, Z. M. and Khalil, K. and Rahim, M. A. A. and Wahab, N. A. and Nawawi, S. W. (2013) A study of the contribution of nearest-neighbour thermodynamic parameters to the DNA sequences generated by ant colony optimisation. In: 2013 Proceedings Of International Conference On Modelling, Identification And Control, Icmic 2013.

Ali Khan , Mohd. Noor Azli (2013) A study of various aspects of internet financial reporting: a case of Malaysian Auditors. In: International Conference on Education and Information Management (ICEIM) 2013, 2013.

Rosli, S. E. and Mohd-Norddin, M. N. A. and Jaafar, J. and Sudirman, R. (2013) Study on catalyst loading using speek/CSMM membrane in DMFC. In: Proceedings Of The 2013 IEEE 7th International Power Engineering And Optimization Conference (PEOCO2013).

Samsudin, S. I. and Rahmat, M. F. and Wahab, N. A. and Razali, M. C. and Gaya, M. S. (2013) A study on controller design strategies for tito plant. In: Proceedings of the 2013 IEEE 8th Conference on Industrial Electronics and Applications, ICIEA 2013.

Arsad, Agus (2013) A study on crystallization kinetics and morphology of different size of short carbon fiber reinforced polypropylene SCF/PP composites. In: 13th National Symposium on Polymeric Materials 2013 - Innovative Polymer: Materials, Processes and Products, 2013.

Hamzah, N. and Nordin, N. M. and Isahak, W. N. R. W. and Kassim, M. B. and Yarmo, M. A. (2013) Study on effect recyclability of ru/bentonite-tio2 catalysts in glycerol hydrogenolysis reaction using x-ray photoelectron spectroscopy (XPS). In: Advanced Materials Research.

Ahmad, Norhayati and Yuzo, Nakamura and Kamibayasi, Hiroki and Mohamed Bazin, Maisarah (2013) Study on fabrication of ceramic membrane from shirasu balloon for waste water filtration. In: Green Technologies For Sustainable & Innovation In Materials.

Ainullotfi, Asim Abdullah and Ibrahim, Ab. Latif and Masron, Tarmiji (2013) A study on integrated community based flood mitigation with remote sensing technique in Kota Bharu, Kelantan. In: Regional Conference on Local Knowledge 2013, 12-13 Oct, 2013, Kuching, Sawarak.

Muhamad, Nor Asiah (2013) Study on moisture absorption level of palm oil-based carotino oil as transformer insulator. In: ICECECE 2013: International Conference on Electrical, Computer, Electronics and Communication Engineering, 2013.

Yahya, Wira Jazair and Paramasivam, Kishokanna and Rajoo, Srithar (2013) Study on noise generation in a high speed centrifugal fan. In: Advanced Materials Research.

Muhamad, Nor Asiah and Amran, Aliff Ali and Suleiman, A. A. and Jamail, N. A. M. (2013) Study on palm-oil based insulation oils conductivity using PDC measurement technique. In: ICECECE 2013: International Conference on Electrical, Computer, Electronics and Communication Engineering, 2013.

Bahraeian, Sobhan and Abron, Khatereh and Pourjafarian, Fatemeh and A. Majid, Rohah (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: Advanced Materials Research, 26-27 March 2013, Penang, Malaysia.

Bahraeian, Sobhan and Abron, Khatereh and Pourjafarian, Fatemeh and Abd. Majid, Rohah (2013) Study on synthesis of polypyrrole via chemical polymerization method. In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 November 2012, Penang, Malaysia.

Abdullah, Hayati and Ariffin, A. (2013) A study on the effect of exhaust gases on the indoor air quality onboard ships. In: Applied Mechanics And Materials.

Yuliwati, E. and Ismail, Ahmad Fauzi (2013) Submerged ultrafiltration for minimizing energy process of refinery wastewater treatment. In: Advanced Materials Research.

Fallah, A. and Kordestani, D. and Alizadeh, A. and Endud, S. (2013) Supported palladium catalysis using a biguanide n-donor motif on mesoporous silica for suzuki-miyaura coupling reaction. In: Advanced Materials Research.

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Abdul Manaf, Azizah and M. Abdullah, Shahidan and Lyastani, Sanam Ghorbani and Araghi, Agheb Kohpayeh (2013) A survey for prevention of black hole attacks in wireless mobile adhoc networks using cryptographic techniques. In: 12th WSEAS International Conference on Applied Computer and Applied Computational Science (ACACOS '13), 2013.

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Abdul Manaf, Azizah and Abdullah, Shahidan M. (2013) A survey for prevention of black hole attacks in wireless mobile adhoc networks using IDS agents. In: 12th WSEAS International Conference on Applied Computer and Applied Computational Science (ACACOS '13), 2013.

Araghi, Tanya Koohpayeh and Zamani, Mazdak and Abdul Manaf, Azizah and M. Abdullah, Shahidan and Lyastani, Sanam Ghorbani and Araghi, Sagheb Kohpayeh (2013) A survey for prevention of black hole attacks in wireless mobile adhoc networks using trusted neighbor nodes. In: 12th WSEAS International Conference on Applied Computer and Applied Computational Science (ACACOS '13), 2013.

Mandala, Satria and Abdullah, Abdul Hanan and Ismail, Abdul Samad (2013) Survey of e-learning security. In: Proceedings - International Conference on ICT for Smart Society 2013: "Think Ecosystem Act Convergence", ICISS 2013, 2013.

Mandala, Satria and Abdullah, A. H. and Ismail, A. S. (2013) A survey of e-learning security. In: Proceedings - International Conference on ICT for Smart Society 2013: "Think Ecosystem Act Convergence", ICISS 2013.

Davani, Zavosh Abdollahzadeh and Abdul Manaf, Azizah (2013) A survey on key management of zigbee network. In: International Conf on E-Business Technologies on Web, BangkokEBW 2013, 2013.

Hermawan, Hendra and Mantovani, D. (2013) Susceptibility to stress corrosion cracking of fe-35mn alloy under a pseudo-physiological condition. In: Applied Mechanics And Materials.

Abdul Rahman , Hasimah (2013) Sustainable energy management practices and its effect on EEI: a study on university building. In: Global Engineering Science and Technology Conference, 2013.

Abd Manan, Zainuddin (2013) Sustainable Green Management System (SGMS). In: Proceedings of the 6th International Conference on Process Systems Engineering (PSE ASIA), 2013.

Jafri, Syed Khurram Ali and Ismail, Kamariah and Khurram, Wafa and Soehod, Khairiah and Sofian, Saudah (2013) Sustainable growth in women owned technoprises: a conceptual framework. In: Proceedings Of The 2013 International Conference On Information, Business And Education Technology (ICIBET 2013).

Abu Mansor, Nur Naha (2013) Sustainance of community engagement -is it a feasible feat? In: ICIMR 2013, 2013.

Hajmohammadi, M. S. and Ibrahim, R. (2013) A svm-based method for sentiment analysis in Persian language. In: Proceedings Of SPIE - The International Society For Optical Engineering.

Gustiono, D. and Wibowo, E. and Othaman, Z. (2013) Synthesis and characterization of InGaAS nanowires grown by MOCVD. In: 2013 International Conference On Science & Engineering In Mathematics, Chemistry And Physics (SCIETECH 2013).

Zeimaran, Ehsan and Bahraeian, Sobhan and Ghanbari, Taravat and Pourshahrestani, Sara and Mohd. Nor, Hussin (2013) Synthesis and characterization of supramolecular elastomers from polyacids composed of vegetable oils. In: Advanced Materials Research.

Yusop, A. H. and Hermawan, Hendra (2013) Synthesis and development of polymers-infiltrated porous iron for temporary medical implants: a preliminary result. In: Green Technologies For Sustainable & Innovation In Materials.

Abdul Rahman, Rosly (2013) Synthesis and simulation of sol-gel based dielectric antireflection coatings. In: International Conference on Solid State Physics, 2013.

Nordin, N. A. M. and Hamzah, N. and Adnan, N. F. and Isahak, W. N. R. W. and Yusof, M. Z. M. and Salimon, J. and Yarmo, M. A. (2013) Synthesis characterisation and catalytic activity of sol-gel derived silica-mineral acids. In: Advanced Materials Research.

Abd. Jalil, Aishah (2013) Synthesis of ?-feooh nanoparticles in ionic liquid for enhanced 2-chlorophenol degradation: insight into photokinetic analysis. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), Desaru, Johor Bahru, 9-10th December 2013, 2013, Desaru, Johor Bahru.

Abdul Aziz, Nur Azmyra and Abu Bakar, Aznizam and Hassan, Azman and Azmi, Nurulhusna (2013) Synthesis of chitosan-grafted-poly (Methyl Methacrylate) with fenton's reagent (FE2+ - H2O2) as a redox initiator. In: Malaysia International Polymer Conference 2013, 2013.

Abu Bakar, Aznizam (2013) Synthesis of chitosan-grafted-poly(methyl methacrylate) with fenton's reagents as a redox initiator. In: Malaysian Polymer International Conference, 2013.

Shaharuddin, Nik Mohd Ridzuan and Intan Zaurah, Mat Darus (2013) System identification of flexibly mounted cylindrical pipe due to vortex induced vibration. In: IEEE Symposium on Computers and Informatics, ISCI 2013, 7 April 2013 - 9 April 2013, Langkawi, Malaysia.

Mohd. Shamsuddin, Norazizi and Aminudin, B. A. and Zetty, M.I. (2013) Systematic fea study of vehicle exhaust system hanger location using Addofd Method. In: Applied Mechanics And Materials.

Asmuni @ Hasmuni , Hishammuddin (2013) Tackling University timetabling problems using hybridization of swarm based approach. In: 6th Multidisciplinary International Scheduling Conference (MISTA 2013), 2013.

Ali, Marlina (2013) Tahap kefahaman konsep daya dan gerakan dalam kalangan pelajar tahun akhir program Pendidikan Fizik, UTM. In: 4th International Seminar on Quality & Affordable Education (ISQAE 2013), 2013.

Abdulhussean, Sanaa Abdulkarim (2013) The talent recruitment strategies for administration and economic opportunities in the knowledge society. In: The Second international Conference The Managerial and Economic Opportunities in Business Environment,, 2013.

Nordin, Syarifah Zyurina and Caccetta, Lou (2013) Task rescheduling model for resource disruption problem in unrelated parallel processor system. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, 6-8 Nov, 2013, Penang, Malaysia.

Sadeghian, Amirmohammad and Zamani, Mazdak and Abdul Manaf, Azizah (2013) A taxonomy of SQL injection detection and prevention techniques. In: international Conference on informatics and Creative Multimedia 2013 (ICICM2013). September 3-6, 2013, 2013, Kuala Lumpur.

Abu, Mohd. Salleh (2013) Teachers' perception on language proficiency of secondary school students and factors contributing to proficiency. In: 4th Malaysian Education Deans' Council (MEDC) Seminar 2013, 23-25 September, 2013.

Andwari, Amin Mahmoudzadeh (2013) A technique of minimizing low-load misfiring occurrence in two-stroke cycle engine. In: The 6th International Meeting On Advanced Thermofluids (IMAT2013), 2013.

Tan, Owee Kowang and Tan, Mei Yee and Choi, Sang Long and Mohd. Rasli, Amran and Abu Bakar, Fairul Anwar (2013) Technology management: developing an innovation model for research universities in Malaysia. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Abu Hassan , Shukur (2013) Tensile and quasi-static flexural properties of recycled glass fibre reinforced polyester composite. In: International Conference on The Science and Engineering of Materials (ICoSEM2013), 2013.

Ardhyananta, Hosta and Abdul, Fakhreza and Widyastuti, Widyastuti and Sulistijono, Sulistijono and Hassan, Azman and Kurniawan, Denni (2013) Tensile and thermal properties of Bambusa arundinacea and Dendrocalamus asper culm fibers. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Ho, S. P. and Shalaby, M. and Peccianti, M. and Clerici, M. and Pasquazi, A. and Ozturk, Y. and Ali, J. and Morandotti, R. (2013) Terahertz characterization via an all-optical, ultra-thin-knife-edge technique. In: CLEO: QELS_Fundamental Science, CLEO:QELS FS 2013.

Kamardin, K. and Rahim, M. K. A. and Hall, P. S. and Samsuri, N. A. and Jalil, M. E. and Ayop, O. (2013) Textile artificial magnetic conductor waveguide sheet with monopole antennas for body centric communication. In: 2013 7th European Conference on Antennas and Propagation, EuCAP 2013.

Hang, See Pheng and Shamsuddin, Siti Mariyam (2013) Texture classification of lung computed tomography images. In: International Conference on Graphic and Image Processing (ICGIP 2012), October 05, 2012, Singapore.

Ahmad, Arshad (2013) Themogravimetric analysis of char from empty fruit bunch briquette gasification in classification in a fixed bed tubular reactor. In: 2nd Conference on Emerging Energy and Process Technology (CONCEPT2013), 2013.

Chen, LiSha and Sun, YiFan and Md Rasli, Amran (2013) A theoretical framework for the impact of urbanization on labor cost in China. In: 2013 20th International Conference on Management Science and Engineering, ICMSE 2013, 17 - 19 July 2013, Harbin; China.

Yusof, Ahmad Fadhil and A. Iahad, Noorminshah (2013) Theoretical model for continuance use of mobile phone wellness application. In: 3rd International Conference on Research and Innovation in Information Systems, 2013 (ICRIIS13), 2013.

Nawi, I. N. M. and Bahadoran, M. and Ali, J. and Yupapin, P. (2013) A theoretical model of all-optical switching induced by a soliton pulse in nano-waveguide ring resonator. In: Journal Of Physics: Conference Series.

Abdullah Binslem, Salma and Ahmad, Mohd. Ridzuan (2013) Thermistor based nano-needle for single cell thermal characterization. In: 2013 IEEE International Conference on Control System, Computing and Engineering, 2013.

Sumeru, Kasni and Nasution, Henry and Ani, Farid Nasir (2013) Thermodynamic analysis of ejector as an expansion device on split-type air conditioner using R410A as working fluid. In: International Conference on Mechanical Engineering, ICOME 2013, 19-21 Sep,2013, Mataram, Lombok, Indonesia.

Refaei, Azadeh and Husin, Wagiran and Saeed, Mohammad Alam (2013) Thermoluminescence properties of optical fibers doped with RE+3 (RE=Sm, Nd) ions subjected to X-ray irradiation. In: 1st International Materials, Industrial and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Ghomeishi, Mostafa and Mahdiraji, Ghafour Amouzad and Adikan, Faisal Rafiq Mahamd and Hashim, Suhairul (2013) The thermoluminescence response of undoped silica pcf for dosimetry application. In: 10th Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR), JUN 30-JUL 04, 2013, Kyoto, Japan.

Richards, Cameron (2013) Thinking globally and acting locally in Mindanao: supporting the delicate balance of future sustainability in South-East Asian wilderness as well as rural areas. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Marghany, Maged Mahmoud (2013) Three dimensional coastline deformation from insar envisat satellite data. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Abujiya, M. R. and Lee, M. H. (2013) The three statistical control charts using ranked set sampling. In: 2013 5th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2013.

Lee, S. Y. and Yee, S. X. and Majid, Zulkepli and Setan, Halim (2013) Three-dimensional GIS approach for management of assets. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Ramlee, Muhammad Hanif Anif and Abdul Kadir, Mohammed Rafiq and Harun, Habibollah (2013) Three-dimensional modelling and finite element analysis of an ankle external fixator. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Afrouzi, Hadi Nabipour and Abdul Malek, Zulkurnain and Mashak, Saeed Vahabi and Naderipour, Amirreza Reza (2013) Three-dimensional potential and electric field distributions in HV cable insulation containing multiple cavities. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Asrah, N. M. and Djauhari, M. A. (2013) Time series behaviour of the number of Air Asia passengers: a distributional approach. In: AIP Conference Proceedings.

Hui, K. H. and Hee, Lim Meng and Leong, Mohd. Salman and Abdelrhman, Ahmed M. (2013) Time-frequency signal analysis in machinery fault diagnosis: review. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Sanhoury, Ibrahim M. H. and Mohd. Amin, Shamsudin and Husain, Abdel Rashid (2013) Time-varying formation control for nonholonomic wheeled mobile robots via synchronization. In: 2013 9th Asian Control Conference (ASCC), 23-26 June 2013, Istanbul, Turkey.

Mohd. Puzi, Shazirawati and Salleh, Shaharuddin and Olariu, Stephan (2013) Timeslot mechanism in neighborhood discovery for wireless sensor networks. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, 6-8 Nov, 2013, Penang, Malaysia.

Chau, L. W. and Yap, Z. C. and Ho, C. S. (2013) Tooling up planning for climate change mitigation in Malaysia. In: The 8th international symposium on digital Earth, 26-29 August 2013, 2013, Borneo Convention Center.

Aris, Nor'aini (2013) Toric varieties in the construction of bézout matrix. In: Proceedings of the 2013 International Conference on Computer Science and Computational Mathematics (ICCSCM 2013), 2013.

Misbari, S. and Hashim, Mazlan (2013) Total aboveground biomass (TAGB) estimation using IFSAR and speckle noises effect on TAGB in tropical. In: 8th International Symposium on Digital Earth, 2013.

Ali, Noor Azman and Mahat, Fauziah and Md. Yunus, Mohd. Yuzairin (2013) Total quality preventive management module and system development in engineering maintenance. In: Second International Conference on Engineering Business Management 2013, 2013.

Abdul Rahman , Alias (2013) Towards crowd control solution for hajj. In: 5th Seminar of Hajj Best Practices, 27-28th August 2013., 2013, Equatorial Hotel, Penang.

Amuda Yusuf, Ganiyu and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria and Misnan, Mohd. Saidin (2013) Towards developing building services standard method of measurement in Malaysia. In: 2nd International Congress on Interdisciplinary Behavior and Social Science, ICIBSoS 2013, 4-5 Nov,2013, Jakarta, Indonesia.

Bamaga, S. O. and Tahir, M. M. (2013) Towards light-weight composite construction: innovative shear connector for composite beams. In: Applied Mechanics And Materials.

Alizadehashrafi, Behnam (2013) Towards Malaysian three-dimensional spatial data infrastructure. In: International Symposium and Exhibition on Geoinformation (ISG 2013), 2013.

Abdul Malik, Adi Maimun and Koto, J. and Rashidi, M. (2013) Tracking of ships navigation in the Strait of Malacca using automatic identification system. In: IMAM 2013, 2013.

Salim, S. N. S. and Ismail, Z. H. and Rahmat, M. F. and Faudzi, A. A. M. and Sunar, N. H. and Samsudin, S. I. (2013) Tracking performance and disturbance rejection of pneumatic actuator system. In: 2013 9th Asian Control Conference, ASCC 2013.

Mad, Ramli and Samsudin, Rubyatul Adawiyah and Mohamed, Mahadhir and Johari, Anwar M. and Kamaruddin, Mohd. Johari and Ali, Asmadi H. (2013) Trans-esterification of triglycerides with methanol on sulfated zirconia prepared with different concentration of sulfuric acid. In: International Conference on Mechanical Engineering, ICOME 2013, 19-21 Sep, 2013, Mataram, Lombok, Indonesia.

Ruskam, Aminuddin and Jandra, Mifedwill and Abdullah, Akmaliza (2013) Transformasi pengajian tinggi: pembudayaan sains inovasi. In: Seminar on Islam, Science and Technology 2013, 2013.

Ramachandiran, V. and Muhamad, N. A. and Talib, M. A. (2013) Transformer faults classification based on polarization and depolarization current (PDC) measurement test data on mineral oil samples. In: Applied Mechanics And Materials.

Salam, Z. and Facta, M. and Amjad, M. (2013) Transformerless power supply based on single switch resonant inverter for ozone generation. In: 2013 Twenty-Eighth Annual Ieee Applied Power Electronics Conference And Exposition (APEC 2013).

Azini, A. S. and Kamarudin, M. R. and Rahman, T. A. and Rahim, S. K. A. and Rani, M. S. A. (2013) Transparent antenna design for wireless access point application. In: Progress In Electromagnetics Research Symposium.

Majid, Mohammad Rafee and Nordin, Alia N. and Johar, Foziah and Tifwa, H. Y. (2013) Travel emission profile of Iskandar Malaysia neighbourhoods from pre-1980s to 2000s. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Anuar, Aznah Nor (2013) Treatment of rubber wastewater using aerobic granular sludge in a sequential batch reactor. In: 4th International Graduate Conference on Engineering, Science and Humanities 2013 (IGECESH 2013), 2013.

Osman, Ahmed Hamza and Salim, Naomie and Elhadi, Ammar Ahmed E (2013) A tree-based conceptual matching for plagiarism detection. In: 2013 International Conference on Computer, Electrical and Electronics Engineering: 'Research Makes a Difference', ICCEEE 2013, 2013, Sudan.

Musdholifah, Aina and Mohd Hashim, Siti Zaiton (2013) Triangular kernel nearest-neighbor-based clustering algorithm for discovering true clusters. In: PAKDD 2012 International Workshops: 3rd Data Mining for Healthcare Management, DMHM 2012, Multi-View Data, High-Dimensionality, External Knowledge: Striving for a Unified Approach to Clustering, 3Clust 2012, GeoDoc 2012 and 2nd DSDM 2012, 29 May 2012 through 1 June 2012, Kuala Lumpur, Malaysia.

Iddi, H. U. and Kamarudin, M. R. and Rahman, T. A. and Abdurahman, A. Y. and Dewan, R. and Azini, A. S. (2013) Triple band planar monopole antenna for mimo application. In: Progress In Electromagnetics Research Symposium.

Hashim, Mazlan and Pour, Amin Beiranvand and Chong, K. W. (2013) Tropical forest degradation monitoring using ETM+ and MODIS remote sensing data in the Peninsular Malaysia. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Ahmad, Anuar (2013) UAV based multi rotor for environmental survey based on simulation model using calibrated high resolution digital camera. In: 12th international Symposium on Geoinformation & Exhibition, 2013, 2013.

Sabri, Soheil and Muhamad Ludin, Ahmad Nazri and Majid, Mohammad Rafee (2013) Ubiquitous geospatial concept in evolution of the macro and micro spatial planning. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Mohamad, Noridah and Wan, Inn Goh and Abdullah, Redzuan and Ahmad, Ismail and Samsuddin, S. and Abd. Rahman, Mohd. Hadi (2013) Ultimate load carrying capacity of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with double shear truss connectors under axial and eccentric loading. In: International Civil and Infrastructure Engineering Conference 2013, 2013.

Danesh, Shadi and Abdul Rahim, Sharul Kamal and Khalily, Mohsen and Kamarudin, M. R. (2013) Ultra wideband dielectric resonator antenna design. In: IEEE 2013 APS, 2013.

Mahdi, Taha and Ahmad, Arshad and Ripin, Adnan and El Sayed Nasef, Mohamed Mahmoud (2013) Ultrasonic enhancement of separation azeotropic mixtures via single distillation column. In: 2nd Conference on Emerging Energy & Process technology 2013 (CONCEPT 2013), 9-10 Dec 2013, 2013, Desaru.

Abbaszadeh, J. and Rahim, H. A. and Rahim, R. A. and Sarafi, S. (2013) Ultrasonic tomography system: optimizing the frequency in a metal pipe conveyor. In: Applied Mechanics And Materials.

Ahmad Anuar, Melati (2013) Understanding customer toward the sustainability of Malaysian real estate investment trust. In: UNSPECIFIED, 2013.

Keng Yik, Jackie Chen and Deraman, Karim and Ong, Wai Kit and Wan Shamsuri, Wan Nurulhuda and Hussin, Rosli (2013) Undoped diamond-like carbon thin films grown by direct current-plasma enhanced chemical vapour deposition: structural and electrical properties. In: 1st International Conference on Science and Engineering of Materials, ICoSEM 2013, 13-14 Nov, 2013, Kuala Lumpur, Malaysia.

Othman, Aniza and Abdul Kohar, Umar Haiyat (2013) University-industry technology commercialization in Malaysia: opportunities and challenges. In: Conference Proceedings LCMRP 2013, 2013.

Ahmad, Anuar (2013) Unmanned aerial vehicle technology for river bed mapping. In: 12th international UMT Annual Symposium, 2013, 2013.

Jaw, S. W. and Hashim, Mazlan (2013) Urban underground pipelines mapping using ground penetrating radar. In: 8th International Symposium on Digital Earth, 2013.

Abd Majid, Muhd. Zaimi (2013) Urban walkability index assessment model incorporating public cancer prevention and control. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, 2013, Johor Bahru Malaysia.

Abdulhussean, Sanaa Abdulkarim (2013) The usage of virtual reality technologies in the provision of sophisticated industrial information technology. In: The 6th Arab International Conference on Information Technology, 2013.

Gharakhani, Alireza and Sediani, Eka and Khan, Tareef Hayat and Sabzevar, Hadi Bagheri (2013) Use of natural ventilation in Malaysia's future green housing. In: 3rd International Conference on Green Buildings Technologies and Materials, GBTM 2013, 21-22 Dec, 2013, Kuala Lumpur, Malaysia.

Azdarpou, Amin and Rahmani, Omeid and Junin, Radzuan and Yeop, Mohammad Ashrafunnur (2013) Use of olivine for carbon dioxide mineral sequestration. In: BEIAC 2013 - 2013 IEEE Business Engineering and Industrial Applications Colloquium, 7-9 April 2013, Langkawi, Malaysia.

Amirrudin, Nurul Ain and Syed Ariffin, Sharifah Hafizah and Nik Abd. Malik, Nik Noordini and Ghazali, Nurzal Effiyana (2013) User’s mobility history-based mobility prediction in LTE femtocells network. In: IEEE International RF and Microwave Conference (RFM 2013), 2013.

Yee, Wen Choon and Mohamad, Mohd. Saberi and Deris, Safaai and Md. Illias, Rosli and Lian, En Chai and Chuii, Khim Chong (2013) Using bees hill flux balance analysis (BHFBA) for in silico microbial strain optimization. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Ali, Mohd. Fadzli and Joyes, Gordon and Ellison, Linda (2013) Using blended learning to enhance students' cognitive presence. In: International Conference on Informatics and Creative Multimedia 2013 (ICICM 13), 2013.

Rahim, H. A. and Ibrahim, S. (2013) Using near-infrared spectroscopy to investigate the amylose content in rice. In: Measurement Technology And Its Application, Pts 1 And 2.

Ali, Nor Liza (2013) Utilisation language management theory in framing interview questions. In: Language Management Symposium, 2013, Charles University, Praha, Republik Czech.

Johari, Khairiraihanna and Saman, Norasikin and Shiow, Tien Song and Mat, Hanapi and Stuckey, David C. (2013) Utilization of coconut milk processing waste as a low-cost mercury sorbent. In: Industrial And Engineering Chemistry Research.

Abd. Jalil, Aishah (2013) Utilization of greenhouse gases in carbon dioxide reforming of methane over Ni/Mcm-41 catalyst. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), 9-10th December 2013, 2013, Desaru, Johor Bahru.

Abd. Jalil, Aishah (2013) Utilization of microwave for the synthesis of mesoporous silica nanoparticles as ibuprofen drug delivery vehicles. In: 2nd Conference on Emerging Energy & Process Technology (CONCEPT2013), Desaru, Johor Bahru, 9-10th December 2013, 2013, Desaru, Johor Bahru.

Anshar, Muhammad and Abd. Kader, Ab. Saman and Ani, Farid Nasir (2013) The utilization potential of rice husk as an alternative energy source for power plants in Indonesia. In: 1st International Materials, Industrial and Manufacturing Engineering Conference, 2013.

Anshar, Muhammad and Abd. Kader, Ab. Saman and Ani, Farid Nasir (2013) The utilization potential of rice husk as an alternative energy source for power plants in Indonesia. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Hashim, Mazlan and Nadzri, M. I. (2013) Validation of MODIS data for localized spatio-temporal evapotranspiration mapping. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Pesiridis, Apostolos and Rajoo, Srithar (2013) Variable geometry turbocharger active control strategies for enhanced energy recovery. In: 17th Asia Pacific Automotive Engineering Conference, APAC 2013, 1 April 2013 through 3 April 2013, Bangkok; Thailand.

Hamzah, N. and Aripin, M. K. and M. Sam, Y. and Selamat, H. and Ismail, M. F. (2013) Vehicle stability enhancement based on second order sliding mode control. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Ibrahim, Roliana and Khaidzir, K. A. M. and Zaeri, F. (2013) Viable system model in capturing iterative features within architectural design processes. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Leong, Mohd. Salman and Abdelrhman, Ahmed M. and Hee, Limmeng and Hui, K. H. (2013) Vibration analysis of multi stages rotor for blade faults diagnosis. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference, MIMEC 2013, 4-6 Dec, 2013, Johor Bahru, Malaysia.

Lim, Meng Hee and Leong, M. S. and Keng, N. W. (2013) Vibration analysis of rub in rotating machinery. In: Applied Mechanics And Materials.

Ho, T. S. and How, G. C. and Fai, Y. C. and Kang, T. W. and Ming, E. S. L. (2013) Vision recognition on line pattern following behavior on pob-bot. In: Applied Mechanics And Materials.

Ahmad, Mohd. Hamdan and Ariffin, Azman and Malik, Tasaduq Abbas (2013) Visualizing the application of GIS in transformation towards a sustainable development and a low carbon society. In: International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Abd. Rahim, Shayfull Zamree and Sharif, Safian and Mohd. Zain, Azlan and Mohd. Saad, Rozaimi and Fairuz, M. A. (2013) Warpage analysis with straight drilled and conformal cooling channels on front panel housing by using Taguchi method. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2013, 28-29 Nov,2013, Bandung, Indonesia.

Mohamad Jan, Nurhidaya and Fong, Wan Heng and Sarmin, Nor Haniza and Turaev, Sherzod (2013) Watson-Crick Petri net languages with finite sets of final markings. In: 3rd International Conference on Mathematical Sciences, ICMS 2013, 17-19 Dec, 2013, Kuala Lumpur, Malaysia.

Fong, Wan Heng and Mohamad Jan, Nurhidaya and Sarmin, Nor Haniza and Turaev, Sherzod (2013) Watson-Crick Petri net languages: the effect of labeling strategies. In: 21st National Symposium on Mathematical Sciences: Germination of Mathematical Sciences Education and Research Towards Global Sustainability, SKSM 21, 6-8 Nov, 2013, Penang, Malaysia.

Esa, M. R. M. and Ahmad, M. R. and Cooray, V. (2013) Wavelet analysis of the first pulse of initial breakdown process in lightning discharges. In: Progress In Electromagnetics Research Symposium.

Syahrullail, S. and Ani, F. N. and Golshokouh, I. (2013) Wear resistance characteristic of vegetable oil. In: 2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS (ICOSM 2013), MAR 26-27, 2013, Penang, Malaysia.

Sahar, Md. Rahim and Daud, M. R. Sahar Y. and Tamuri, A. R. (2013) The pumping parameters for Er-doped tellurite glass. In: 4th International Conference on Solid State Science and Technology, ICSSST 2012, 18-20 Dec, 2013, Melaka, Malaysia.

Md. Ariff, Mohd. Shoki and Yan, Ng Sze and Zakuan, Norhayati and Bahari, Ahamad Zaidi and Jusoh, Ahmad (2013) Web-based factors affecting online purchasing behaviour. In: 2013 International Conference On Manufacturing, Optimization, Industrial And Material Engineering (MOIME 2013).

Ahmad, M. A. B. and Iahad, N. A. (2013) Websites usability instrument validation using think-aloud method. In: 2013 International Conference of Information and Communication Technology, ICoICT 2013.

Abu Mansor, Nur Naha (2013) Why a systems approach for community challenge. In: University Community Engagement Conference 2013, 2013.

Mohd Ibrahim, Imran and Abdul Rahman, Tharek and Sabran, Mursyidul Idzam and Kesavan, Ulaganathen and Purnamirza, Teddy (2013) Wide band open ended air gap RLSA antenna at 26ghz frequency band. In: Progress In Electromagnetics Research Symposium.

Eluwa, Stephen Enyinnaya and Ho, Chin Siong (2013) Willingness to engage in energy conservation and CO2 emissions reduction: an empirical investigation. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Iyas, M. M. and Sallehuddin, M. and Sukri, M. A. M. and Shuhaimi, M. M. (2013) Wind tunnel testing of composite wing flutter speed due to control surface excitation. In: Applied Mechanics And Materials.

Chen, X. and Song, L. and Assadsangabi, B. and Fang, J. and Mohamed Ali, M. S. and Takahata, K. (2013) Wirelessly addressable heater array for centrifugal microfluidics and escherichia coli sterilization. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS.

Hamzah, Esah and Tze, Mi Yong and Chee, Kevin Mun Fai (2013) XRD studies on residual stress of the diamond films grown using hot filament chemical vapour deposition technique on silicon nitride and tungsten carbide substrates. In: Advanced Materials Research (Volume 686).

Aripin, M. Khairi and Md. Sam, Yahaya and Danapalasingam, Kumeresan A. and Peng, Kemao and Che Hasan, Mohd. Hanif and Ismail, Muhamad Fahezal (2013) A yaw rate tracking control of active front steering system using composite nonlinear feedback. In: 13th International Conference on Systems Simulation, Singapore, November 6-8, 2013. , 2013.

Hematian, Amirshahram and Chuprat, Suriayati and Abdul Manaf, Azizah and Parsazadeh, Nadia (2013) Zero-delay FPGA-based odd-even sorting network. In: IEEE Symposium on Computer And informatics, 2013.

Hematian, Amirshahram and Chuprat, Suriayati and Manaf, Azizah Abdul and Parsazadeh, Nadia (2013) Zero-delay FPGA-based odd-even sorting network. In: 9th International Conference on Computing and Information Technology, IC2IT 2013, 9 May 2013 through 10 May 2013, Bangkok, Thailand.