Universiti Teknologi Malaysia Institutional Repository

The influence of various inlet geometries on mixed convection flow of ethylene glycol in a backward facing step

Fathinia, F. and Heshmati, A. and Parsazadeh, M. and Wahid, M. A. and Sies, M. M. (2013) The influence of various inlet geometries on mixed convection flow of ethylene glycol in a backward facing step. In: Applied Mechanics And Materials.

Full text not available from this repository.

Official URL: http://dx.doi.org/10.4028/www.scientific.net/AMM.3...

Abstract

Numerical simulations of two dimensional laminar mixed convection flow over backward facing step with different inlet geometries in a duct is investigated by using finite volume method. The wall down downstream of the step is kept at a temperature of 330K and constant heat flux of 500W/m2, while the other walls that form the other side of the duct are thermally insulated. Ethylene glycol is used as working fluid and three types of barrier which are triangular, parallelogram and semicircle are carried out to compare with a simple entrance of backward facing step. The Reynolds number was in the range of 50Re200 and fluid temperature is 300K at the inlet of the channel. Parallelogram inlet has the highest average velocity in all sections and highest average Nusselt number over downstream. Also triangular inlet has the highest shear stress all over the downstream of the duct and cause to make a highest skin friction coefficient.

Item Type:Conference or Workshop Item (Paper)
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:51361
Deposited By: Haliza Zainal
Deposited On:27 Jan 2016 01:53
Last Modified:18 Sep 2017 01:41

Repository Staff Only: item control page