Items where Subject is "Unspecified"

Ismail, Ainaa Maya Munira (2012) Flow pattern of particle contamination in fluid flow through mitre bend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kassim, Khairul Anuar (2011) Characterization of phosphoric acid- and lime-stabilized tropical lateritic clay. Environmental Earth Sciences, 63 (5). 1057 - 1066.

Nik Yahya, Nik Fatma Arisya (2010) A study on the level of statisfaction of lecturers towards the physical environment in their office room. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Sani, Salfarina (2004) Penilaian kesesuaian modul pembelajaran kendiri daya & gerakan mata pelajaran fizik KBSM tingkatan empat. In: International Education Conference, 2004, Sarawak.

Shamsudin, Supiah (2010) Effect of storm separation time on rainfall characteristic - a case study of Johor Malaysia. European Journal of Scientific Research, 45 (2). pp. 162-167. ISSN 1450-216X

Sui Hong, Choo (2004) Multiple mobile robot communication using bluetooth tranceive. In: International Conferece on Artificial Intelligence in Engineer, 2004, n/a.

Yun Hau, Ng (2004) XRD diffractogram simulation and refinement using rietveld zeolite-p structure identification. In: International Conference On X-Rays And Related Technique , 2004, n/a.

A

A., Marto and K. A., Kassim and A. M., Makhtar and W. Z., Yaacob and Muhardi, Muhardi (2010) The performance of fly ash embankment model by means of. Journal of Construction and Building Materials .

A. A. Hmeda, Alsnose (2008) Comparison between public standard forms of construction contract used in Malaysia and Libya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

A. Abushnaf, Ahmed Mohamed (2009) Assessment of aerial triangulation using different digital photogrammetric software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

A. Ahmed, Zakria (2012) Hybrid particle swarm optimization and black stork foraging for functional neural fuzzy network learning enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Aziz, A. (2003) The development of a new generation of small two-stroke engines at university at University Teknologi Malaysia (UTM). In: CAFEO-21:21st Conference of ASEAN federation of Engineering Organization-ASEAN Engineering Network For Enhancing Asean Self Supporting Technology and Industry-Indonesia, 2003, Jogjakarta, Indonesia.

A. Hasbi, Hasbullah (2003) Infrared and raman studies of radio frequency sputtered hydrogen amorphous silicon carbide thin films. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

A. Majid, Norhayati (2003) Development of an intelligent perception system for behaviour-based mobil robot. In: International Conference On Robotics, Vision Information and Processing, 2003, Selangor.

A. Manan, Muhammad (2008) Improved oil well modelling accuracy using statistical approach. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 108 - 121. ISSN 1823-5255

A. Manan, Muhammad (2006) Microscopic study of emulsion flow in porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

A. Rahim, Mohamad Kamal (2010) Dual-band microstrip antenna array with a combination of mushroom, modified Minkowski and Sierpinski electromagnetic band gap structures. Iet Microwaves, Antennas and Propagation, 4 (11). 1756 - 1763.

A. Rahim, Norisham (2012) Persepsi tenaga pengajar dan majikan industri terhadap hubungan kerjasama antara Institut Latihan Vokasional dan industri di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

A. Rahman, Aida (2012) The roles of reading and group discussion as pre-tasks in impromptu speech on facts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Rashid, Rozeha (2008) Application of rasch- based espegs model in measuring generic skills of engineering students: a new paradigm. WSEAS Transactions on Advances in Engineering Education, 8 (5). 591 - 602. ISSN 1790-1979

A. Rashid, Rozeha (2010) A cross-layer approach in sensing and resource allocation for multimedia transmission over cognitive UWB Networks. Eurasip Journal on Wireless Communications and Networking .

A. Rashid, Rozeha and Mohamed, Ibrahim and Abdullah, Razimah and Zaharim, Azami and Masodi, Mohd. Saidfudin (2007) Outcome based education performance assessment: a computational model to measure electrical engineering subjects learning outcomes. In: 4th WSEAS/IASME International Conference On Engineering Education, 24-26 July 2007, Greece.

A. Rasid, Zainudin (2004) The general finite element formulation of the structural behaviour the shape memory alloy hybrid composite plates in the aerospace vehicle. In: National Postgraduate Colloqium School of Chemical Engineering, 2004, n/a.

A. Razak, Normala (2009) Kekuatan niat keusahawanan (entrepreneurs intention) pelatih industri automotif terhadap kerjaya usahawan era terkini. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

A. Roslan, Firra (2012) Interpretation of ultimate pile capacity based on Maintain Load Test (MLT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Talib, Hisa (2009) Pencemaran air dan aktiviti kerja tanah di Putrajaya kajian kes : Tasik Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ab Hamid, Mohd. Rashid and Mustafa, Zainol and Mohd. Suradi, Nur Riza and Abdullah, Mokhtar and Ismail , Wan Rosmanira and Mohd. Ali, Zalina and Idris, Fazli and Yaziz, Siti Roslindar and Mustofa@Ismail , Zulkhibri (2010) Value-based total performance excellence model an overview. Jurnal Teknologi Sains Sosial, 52 . 95-104 . ISSN 2180-3722

Ab Rahman, Hamidah (2004) Faktor penyumbang kepada masalah keluarga tunggal & penceraian : kajian kes di negeri Johor Darul Takzim. In: Seminar Pembangunan Keluarga Kebangsaan, 2004, n/a.

Ab Rahman, Hamidah (2003) Peranan komunikasi dalam keluarga bermasalah di Negeri Johor : satu kajian ke arah pemampatan institusi keluarga. In: Persidangan Seminar Kebangsaan Kaunseling Berspektif Islam, 2003, Kuala Lumpur.

Ab. A. Alwafi, Yusef (2012) Laser surface alloying of pure aluminium substrate with iron and copper by Q-switched Nd:Yag laser. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ab. Azis, Shazmin Shareena (2010) Keadilan dan keseragaman nilai taksiran harta tanah berbantukan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Aziz, Ab. Asmaidi (2008) Pembelajaran sepanjang hayat dalam pendidikan teknik dan vokasional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Hadi, Fairuzy (2010) Kepimpinan kerja berpasukan Ketua Jabatan dan stail kepengikutan pensyarah di Universiti Teknologi Malaysia, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Hamid, Nazihah (2011) Expression of class III endochitinase gene from trichoderma virens UKM-1 in pichia pastoris, its in silico analysis and biochemical characterization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Karim, Nur Azwani (2009) Reduction of aldehydes and ketones to alcohols and its modification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ab. Latip, Norizatul Azila (2009) Peranan bahasa dalam penyelesaian masalah Matematik bukan rutin di kalangan pelajar tingkatan 2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Muin, Zafirah (2012) Tahap kesedaran organisasi tentang kepentingan ergonomik terhadap kesihatan dan keselamatan di tempat kerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Muin , Zafirah (2010) Implikasi ketidakpatuhan perjanjian penswastaan projek pembangunan harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Nasir, Nurul Hana (2012) Predicting community of practice culture in Malaysian Polytechnics from strategic leadership practice by program head. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ab. Rahim, Nik Mohd. Zaim (2008) Permerkasaan hadith Nabi S.A.W menerusi takhrij dalam penulisan berunsur agama Di Malaysia dan Indonesia. In: Seminar Antarabangsa Budaya dan Pemikiran Islam Malaysia-Indonesia 2008, 2008, IAIN Jamiah Ar - Raniry, Banda Acheh.

Ab. Rahman, Nur Afiqah (2011) Investigating the effects of word pairs on word knowledge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Rahman, Syakir Amir (2011) Hotel room supply and demand in Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Razak, Mohd. Azman (2010) Technology acceptance and factors of management support and system quality towards e-project cost monitoring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ab. Salam, Fauziah (2000) Stress di kalangan pelajar Sekolah Menengah Agama Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Wahab, Roswanira (2010) Cloning and DNA sequence analysis of the haloalkanoic permease uptake gene from Rhizobium sp. RC1. Biotechnology, 9 (3). 319 - 325.

Ab. Wahab, Roswanira and Huyop, Fahrul Zaman and Mesri, Suhaiyla (2010) Enzymatic study of the dehalogenase involved in biodegradation of herbicide 3-chloropropionic acid (#CP) by Pseudomonas SP. B6P isolated from a rice paddy field. In: National Biotechnology Seminar, 24-26 May 2010, PWTC, Kuala Lumpur.

Abal Abas, Zuraida (2012) Enhanced advancing front techniques for mesh generation in radiative heat transfer problem. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abang Mahmod, Dayang Salyani (2011) Preparation and characterization of polyacrylonitrile fiber precusor using multi-hole spinneret. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abas, Farah Nadia (2010) Strategi ke arah meningkatkan keberkesanan penyertaan pihak swasta dalam local agenda 21 kajian kes : Sungai Sebulong. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abas, Hasfarina (2012) Tahap, amalan dan masalah pengurusan bilik darjah guru-guru Sekolah Menengah daerah Segamat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abas, Norzaida (2012) Spatial temporal modeling of rainfall process in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abbas, Cheddad (2005) Disparity map calculation through epipolar lines estimation for 3D facial reconstruction. In: International Symposium & Exhibiton on Geoinformation 2005 Geoinformation, 2005, Malaysia.

Abbasiasbagh, Amirhossein (2011) The effect of urban attributes on continuity and consistency of building facades. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abbaszadeh, Fatemeh (2011) Characterization of the physical elements of street design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abbood, Nabeel Kadhim (2010) A software for simultaneous targeting and design of a maximum heat recovery network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd Aziz, Zul Azri (2009) Enhancing the identity of historic living city through integrated social space. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd Hamid, Abu Bakar (2003) Franchising as a tool for small medium enterprises: a study on critical success factors. In: International Conference of the Asian Academy of Applied Business, 2003.

Abd Hamid, Abu Bakar (2003) Relationship marketing: barrier to progress an analysis on bus operation between large firms and small and medium enterprises. In: Asia Pacific Business Environment: Innovative Response to Region Events, 2003, Shah Alam , Selangor.

Abd Hamid, Abu Bakar (2003) A review of electronic commerce in businee - to-business: cases in Malaysia. In: Asia Pacific Seminar On e-Customer Relationship Management, 2003, Shah Alam , Selangor.

Abd Hamid, Mohd. Azhar (2003) Beberapa premis tentang Perasaan Hasad Dengki (PHD) sebagai nilai masyarakat melayu : suatu polemik? In: Seminar Za'ba Mengenai Alam Melayu, 2003, Renaissance Hotel, Kuala Lumpur.

Abd Hamid, Mohd. Azhar (2003) Manusia dan kemanusiaan dalam pembangunan. In: Persidangan Kebangsaan Pusat Pengajian Sosial, Pembangunan & Persekitaran , 2003, UKM, Bangi.

Abd Hamid, Mohd. Azhar (2004) Membangun & menyuburkan kreativiti kanak-kanak : suatu kupasan terhadap peranan ibu-bapa pada era inovasi. In: Simposium Kebangsaan Kanak-Kanak Menurut Perspektif Islam , 2004, Pulau Pinang.

Abd Hamid, Mohd. Azhar (2003) Mentaliti kritis dalam kalangan masyarakat melayu : suatu pengalaman terhadap pelbagai persoalan hidup masyarakat melayu masa kini. In: Seminar Za'ba Mengenai Alam Melayu, 2003, Renaissance Hotel, Kuala Lumpur.

Abd Hamid, Mohd. Azhar (2003) Pembangunan & pemampatan literasi kreatif dalam organisasi katalis pada era inovasi. In: Seminar Za'ba Mengenai Alam Melayu, 2003, Renaissance Hotel, Kuala Lumpur.

Abd Hamid, Mohd. Azhar (2004) Universiti bertaraf dunia : suatu pemikiran, gagasan dan wawasan pada zaman pascamoden. In: Seminar Antarabangsa Nilai Dalam Komuniti Pasca Modenisme, 2004, Langkawi, Kedah.

Abd Hamid, Mohd. Azhar (2004) Wajah moral masyarakat Melayu pascamoden : antara realiti, harapan gagasan pendidikan moral tinggi. In: Seminar Antarabangsa Nilai Dalam Komuniti Pasca Modenisme, 2004, Langkawi, Kedah.

Abd Jamal, Hamzah (2003) Boro inovasi & perundingan UTM. In: Konvensyen Melaka Sebagai Pusat Kecemerlangan, 2003, Melaka.

Abd Kadir, Hamdan (2007) Kesan latihan ketegasan terhadap tegas diri dan konsep kendiri di kalangan ibu tunggal di Johor Bahru. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Abd Latif, Muhammad Shafie (2004) The development of virtual exhibition area for implementation of motion planning. In: 2nd Conf. on Computer Graphics & Multimedia (CoGRAMM'04), 2004, n/a.

Abd Latiff, Muhammad Shafie (2004) Collision free multi agents (crowd) motion planning in complex system. In: International Conference On Work With Computing System, 2004, n/a.

Abd Latiff, Muhammad Shafie (2004) Optimal path planning algorithm in virtual environment. In: International Conference On Artificial Intelligence , 2004, n/a.

Abd Latiff, Muhammad Shafie (2004) Toward reliable virtual-surgery in virtual environments : achievement, challenge and design guidelines. In: International Conference On Computer Graphics And Multimedia , 2004, n/a.

Abd Majid, Fadzilah Adibah and Goh, Poh Chin and Hashim, Zanariah (2006) Antidiabetic effects of cashew leaves extract. In: Special Topics In Bioprocess Engineering Volume I. Penerbit UTM, Johor , 1 - 38. ISBN 978-983-52-0600-9

Abd Majid, Muhd. Zaimi (2004) A pilot study on sub-contractor selection using fuzzy logic. In: Annual Conference On Management In Construction Researcher Association, 2004, n/a.

Abd Manaf, Azizah and S. M., Abdullah and M., Zamani (2010) Capacity and quality improvement in reversible image watermarking approach. In: Proceeding - 6th International Conference on Networked Computing and Advanced Information Management, NCM 2010, 2010, Seoul, Korea.

Abd Manan, Zainuddin (2010) A review of extraction technology for carotenoids and vitamin e recovery from palm oil. Journal of Applied Sciences, 10 (12). 1187 - 1191.

Abd Manan , Zainuddin (2008) Capacity increase and waste minimization in a formaldehyde plant. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 101 - 107. ISSN 1823-5255

Abd Rahman, Alias (2010) A 3D volumetric soft geo-objects data model for dynamic streamflow generating processes. Journal of Environmental Hydrology, 18 . 1 - 14.

Abd Rahman, Asma Nabihah (2009) Keberkesanan kaedah pembelajaran konstruktivisme model needham terhadap pembelajaran Pendidikan Islam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd Rahman, Tharek (2010) A beam steering radial line slot array (RLSA) antenna with reconfigurable operating frequency. Journal of Electromagnetic Waves and Applications, 24 (8-9). 1079 - 1088.

Abd Rahman, Tharek (2010) A new rain attenuation conversion technique for tropical regions. Progress In Electromagnetics Research B, 26 . 53 - 67.

Abd Rahman, Tharek (2010) A novel of reconfigurable planar antenna array (RPAA) with beam steering control. Progress in Electromagnetics Research B (20). 125 - 146.

Abd Rashid, Rafhana (2012) Threat profiling based on vulnerability assessment and penetration testing: iphone case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd Wahab, Abas (2003) Development of indoor testing facilities for low wind speed with turbine research activities. In: Regional Conference On Energy Technology Towards a Clean Environment, 2003, Phuket, Thailand.

Abd Wahab, Abas (2003) The influence of roughness and obstacle on wind power map. In: International Symposium & Exhibition On Renewable Energy, 2003, Kuala Lumpur.

Abd. Aziz, Abdul Rahim (2012) Business valuation : the perception of valuers in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abd. Aziz, Ahmad Sazree (2010) Transmission system fault locations via impedance based tehcnique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Aziz, Azila and Jusoh, Norhana and Wong, Fui Ling (2006) Challenges in the development of amperometric glucose biosensors. In: Special Topics In Bioprocess Engineering Volume I. Penerbit UTM, Johor , 43 - 60. ISBN 978-983-52-0600-9

Abd. Aziz, Azniza (2010) Adaptive equalizer for data transmission on PCI-express bus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Aziz, Noor Syazwana (2012) Parallel computation of finite difference methods for heat conduction in duct problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Gapar, Mohd. Syamsul Bahtiar (2012) Comparative study of mechanical properties for FRP material of different classification society. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Ghani, Khalid and Omar, Mohd. Ariffin and Peli, Martalius and Putra Utama, Wahyudi (2006) Peranan quantity surveyor di dalam industri konstruksi di Malaysia. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Abd. Hamid, Nubailah (2012) Performance of hidden beam to column connection for precast concrete frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Hayat, Abd. Muizz (2010) Product quality, counter service and satisfaction on mobile broadband service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Jamil, Suria (2009) Mengenal pasti punca-punca masalah ponteng di kalangan pelajar sekolah rendah : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Kadir, Mohammed Ridha (2009) The use of electronic mail as a communication tool among Johor state government officers in light of the Johor electronic government settings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Kadir, Siti Hajar (2011) Construction safety management in Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Kadir, Siti Latifah (2010) Somatic embryo induction and detection of flavonoid compounds in Melastoma decemfidum ROXB ex. Jack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Abd. Latif, Muhammad Shafie (2008) Automatic visualizaion pipeline formation for medical on grid computing environment. International Journal of Mathematical, Physical and Engineering Science, 1 (3). 161 - 166. ISSN 1307-7465

Abd. Latif, Mukhzani (2011) Establishment of value management framework for implementation in JKR construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Majid, Mohd. Firdaus (2009) Analysis of bullet holes in glass and vechicle metal target for shooting incidence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Malik, Adi Maimin (2010) Aerodynamic characteristics of wing of WIG catamaran vehicle during ground effect. WSEAS Transactions on Fluid Mechanics, 5 (3). 196 - 205.

Abd. Manaf, Azizah (2010) Hisogram matching for color detection : a preliminary study. In: International Symposium on Information Technology 2010 (ITSim'10), 2010, Pusat Konvensyen Kuala Lumpur (KLCC), Kuala Lumpur.

Abd. Manap, Noraniza (2009) Kajian ke atas pengurusan tapak pelupusan sisa pepejal yang berkesan : kajian kes : Arau, Perlis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abd. Rahim, Johan (2000) Gaya pembelajaran pelajar berprestasi rendah di Sekolah Menengah Kebangsaan Ulu Tiram. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Rahim, Nazirah (2009) Public works procurement the European experience. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Rahim, Nurul Hanan (2011) Fabrication and characterization of polyethersulfone multi-walled carbon nanotubes mixed matrix membranes for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Abd. Rahim, Rafidah (2012) Teknik kluster dwi-peringkat untuk penambahbaikan graf gerak dalam pensintesisan pergerakan manusia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahim, Sharul Kamal (2010) 2.45 GHz and 5.8 GHz compact dual-band circularly polarized patch antenna. Journal of Electromagnetic Waves and Applications, 24 (11-12). 1473 - 1482.

Abd. Rahim, Sharul Kamal (2010) Beam forming networks using reduced size butler matrix. Wireless Personal Communications . 1 - 20.

Abd. Rahim, Surani (2000) Gas turbin cogeneration system : a study on the performance in the ceramic tile industry. Masters thesis, Universiti Teknologi Malaysia, International Business School.

Abd. Rahim , Sharul Kamal (2010) A novel design of Butler matrix using optimised size of branch-line coupler. Journal of Optoelectronics and Advanced Materials, 12 (10). 2031 - 2039.

Abd. Rahman, Ali (2010) A tabu search method for finding minimal multi-homogeneous bezout number. Journal of Mathematics and Statistics, 6 (2). 105 - 109.

Abd. Rahman, Hamidah and Omar, Rozeyta (2009) Persepsi staf sokongan pentadbiran dan teknikal terhadap program latihan di UTM. In: Amalan Latihan dan Pembangunan Sumber Manusia di Malaysia. Penerbit UTM Press, Skudai, Johor, pp. 175-200. ISBN 978-983-52-0722-8

Abd. Rahman, Mohd. Azhar (2000) Perception of industries professionals towards electrical and equipment installation technology trainees of Malaysia France Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Rahman, Mohd. Fauzi (2000) Perception of industry towards the competencies of German-Malaysian Institute Graduates in relation to their qualification for highly skilled technician. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Rahman, Muhammad Riza (2012) Numerical simulation and wind tunnel measurements of lateral aerodynamic characteristics on simplified automotive model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Rahman, Nur Fauzana (2012) Comparative study on the composting using natural and effective microorganisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Abd. Rahman, Nurulhuda (2000) Faktor yang mempengaruhi pelanggan untuk datang ke restoran makanan segera : kajian ke atas pelanggan restoren KFC (Terminal One, Seremban). Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Rahman, Rosli (2009) Kesan aktiviti pembelajaran informal terhadap kewujudan pekerja berpengetahuan dalam kalangan guru di Sekolah Menengah Kebangsaan Dato' Ali Haji Ahmad, Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abd. Rahman, Tharek (2010) Adaptive beam steering of RLSA antenna with RFID technology. Progress in Electromagnetics Research-Pier, 108 . 65 - 80.

Abd. Rahman, Tharek (2010) A novel adaptive wi-fi system with RFID technology. Progress in Electromagnetics Research-Pier, 108 . 417 - 432. ISSN 1070-4698

Abd. Rahman, Tharek (2010) A reconfigurable radial line slot array (RLSA) antenna for beam shape and broadside application. Journal of Electromagnetic Waves and Applications, 24 (8-9). 1171 - 1182.

Abd. Rashid, Nor Suhada (2012) Determining near saturated soil hydraulic properties at oil palm plantation using wooding equation and inverse solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Razak, Mohd. Zahidfullah (2011) Mechanical and rheological properties of waste polyethylene terephthalate/acrylonitrile butadiene styrene/montmorillonite nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Razak, Norhuda (2004) Artificial neural network modeling for the prediction of surface area. In: Regional Conference on Solid State Science And Technology , 2004, n/a.

Abd. Shattar, Normurniyati (2012) Predicting refinery energy losses due to fouling in heat exchangers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Wahab, Rohana (2009) Analisis kesilapan dalam penyelesaian masalah Matematik tahun 5. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Wahab @ Dul Ahad, Norhayati (2012) Simulation of slope stability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdalla Elsanusi, Omer Salih (2012) Design and simulation of a solar powered absorption refrigerator for small units. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdel Gadir El Sheikh, Mohamed Hamad (2010) Fixed channel allocation schemes exploiting cell overlap for high altitude platforms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdel Malik, Rafif Hatim Mohamed (2011) Identification suitable development site based on LEED-ND principles in Soba, Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdelaziz Mashaal, Omar Ahmad (2011) A coplanar waveguide fed two arm archimedean spiral slot antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdllah Sani, Zarifah Sofia (2011) Safety culture on construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdol Azis, Mohd Hazmil Syahidy (2012) Numerical modeling of hemodynamics in abdominal aortic aneurysm using immersed boundary method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdollah, Sofiah (2010) Applicability of force majeure clause in construction contract in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Aziz, Azhar (2003) Design and development of air compartment for supercharger. In: International Conference On Advances In Strategic Technologies , 2003, Kuala Lumpur.

Abdul Aziz, Azhar (2003) Development of a new generation of small two-stroke engines at UTM. In: Conference of ASEAN Federation of Engineering Organisation, 2003, Yogyakarta, Indonesia.

Abdul Aziz, Azhar (2003) Development of an environmental-friendly two- stage incinerator for the requirement of Malaysia's small to medium-size housing estates. In: Asia Pacific Conference On Sustainable Energy and Environmental Technologies, 2003, The Platon Hotel, Yokkaichi, Mie, Japan.

Abdul Aziz, Azhar (2004) Step pistone engine design and development. In: Malaysian science And Technology Congress selangor, 2004, n/a.

Abdul Aziz, Azunaidi (2011) Numerical simulation of liquid droplet from porous solids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Abdul Aziz, Mohd. Alwi (2003) Speaker identification based on cross match technique. In: International Conference On Robotics, Vision, Information and Processing, 2003, Pulau Pinang.

Abdul Aziz, Mohd. Ismail (2004) Optimization of nonlinear dynamically system based on model reality differences. In: Permodelan Berangka, Pengoptimunan dan Komputasi, 2004, n/a.

Abdul Aziz, Mustafa Kamal (2003) Continuous steriliser research between UTM-KGB : progress and P. In: Malaysian Palm Oil Board International Palm Oil Congress (PIPOC), 2003, Putrajaya, Selangor.

Abdul Aziz, Mustafa Kamal (2003) Evaporation and distillation red oil from palm pressed fibres in semi-continuous structured packing pilot plant : experimental an economics factors. In: Malaysian Palm Oil Board International Palm Oil Congress (PIPOC), 2003, Putrajaya, Selangor.

Abdul Aziz, Mustafa Kamal (2003) Modelling and simulation coral impacts by chemical pollutants coral atolls : application of CEMOS and WINTOX in coral reefs. In: International Freshwater Management Conference , 2003, Kuching, Sarawak.

Abdul Aziz, Mustafa Kamal (2003) Pilot plant structured packing distillation in solvent extraction carotenoids from palm fibres : determination of H.E.T.P operating conditions and carotenoids compositions. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Abdul Aziz, Mustafa Kamal (2004) To model bukit talang canal using cemos to identify the concentration of acidy characteristic : compare with actual situation. In: International conference on Managing Rivers in The 21st Century, 2004, n/a.

Abdul Aziz, Noor Azeera (2012) Embedding corporate social responsibility in information security management system as human factor solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz, Nursyahira (2012) Mengenalpasti ciri-ciri harta tanah lelong. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Aziz, Ramlan (2008) Computer-aided process design tools for debottlenecking a batch pharmaceutical production. The Journal of The Institution of Engineers, Malaysia, 69 (4). 30 - 37. ISSN 0126-513X

Abdul Aziz, Zulkhairi (2010) Kajian ke atas tahap kualiti perkhidmatan fasiliti di ibu pejabat JKR, Jalan Sultan Salahuddin, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Aziz, Zuraidah (2012) Comparing conventional to industrialised building system construction costing : a case study of school building projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz , Azila (2008) Evaluation of the potential of pelargonium radula extract in repelling aedes aegypti. Journal of Chemical and Natural Resources Engineering - Productivity Improvement Through Optimization, 2 (Sp Ed.). 1 - 19. ISSN 1823-5255

Abdul Hafiz, Abdullah and Muhammad, Azhar and Muda, Hasimah (2006) Mengimarahkan masjid melalui program-program pengajian Al-Quran : kajian di dua buah masjid jamek daerah Johor Bahru. In: n/a, 2006, n/a.

Abdul Hafiz, Abdullah and Nor Muhamad, Nasrul Hisyam and Derani, Rohayati (2006) Persepsi ibu-bapa terhadap faktor-faktor keruntuhan akhlak remaja Islam masa kini : satu tinjauan di Taman Aman Anak Bukit, Alor Setar Kedah. In: n/a, 2006, n/a.

Abdul Hamid, Abdul Rahim (2003) Hazards at construction sites. In: Asia Pacific Structural Engineering and Construction Conference, 2003, Johor Bahru, Malaysia.

Abdul hamid, Abu Bakar (2003) A reversed story: why franchising fail? an example from Malays. In: National Seminar On Managing Malaysia In The New Millenium , 2003, Melaka.

Abdul Hamid, Fauziah (1999) Guru berkualiti : satu tinjauan terhadap sahsiah dan pengajaran mengikut persepsi pelajar di Sekolah Menengah Kebangsaan Pasir Gudang(1), Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Hamid, Mariani and Sarmidi, Mohamad Roji (2010) Mangosteen (garciniamangostanal.) leaves extract increased melanogenesisin B16F1 melanoma cell line. In: The Korean Society for Biotechnology and Bioengineering Spring Meeting & International Symposium, April 15-16, 2010, Kyungwon University, South Korea.

Abdul Hodi, Azira (2012) Perlaksanaan kaedah bina kemudian jual (BKJ) bagi menangani projek perumahan terbengkalai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Jalil, Jalinawaty (2008) The uses of internet based activities in teaching subject-verb-agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Jalil, Mohamad Kassim (2003) Development of a virtual reality based driving simulator. In: Southeast Asian Ergonomics Society Conference, 2003, n/a.

Abdul Jalil, Mohd. Kassim (2004) Nurturing creativity through engineering design. In: ConferenceOn Engineering Education, 2004, Kuala Lumpur.

Abdul Jalil, Nursyuhadah (2009) Kajian hubungkait harga rumah dengan faktor kemudahan awam menggunakan sistem maklumat geografi (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Kadir, Hamdan (2004) Intervention of suicidial behaviour using counseling approach. In: Association of Psycological and Educational Counsellors of Asia Pacific Biennial International Conference, 2004, n/a.

Abdul Kadir, Hamdan (2004) Trainee teachers' perception and attitude towards guidance & counseling services in Maktab Perguruan Temenggong Ibrahim, Johor. In: Association of Psycological and Educational Counsellors of Asia Pacific Biennial International Conference, 2004, n/a.

Abdul Kadir, Mohammed Rafiq (2010) Biomechanics of a lumbar section after disc arthoplasty. European Journal of Scientific Research, 39 (1). 22 - 28.

Abdul Kadir, Mohd. Rashdan (2011) Information technology (IT) in supply chain management : supplier-manufacturer information collaboration system development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Karim, Firas A. (2011) Mercury (II) removal from aqueous solutions using oil palm empty fruit bunches (fiber and pith) as biosorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Karim, Sazali P. (2008) Protection system analysis for transmission overhead line using fault signatures. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Abdul Keyon, Aemi Syazwani (2011) Polydimethysiloxane-cyanopropyltriethoxysilane-derived sol-gel hybrid as stir bar sorptive extraction sorbent for non-steroidal anti-inflammatory drugs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Latif, Siti Suhaira (2011) Hubungan self-esteem, optimism dan perceived control dengan kesediaan menghadapi perubahan organisasi dalam kalangan Guru Penolong Kanan pentadbiran sekolah menengah daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Latiff, Mohd. Helmi (2003) Hydrogen production for fuel cell using autothermal reforming on ni-co catalysts : effect of various support. In: National Symposium On Science and Technology, 2003, UM, Kuala Lumpur.

Abdul Latiff, Zulkarnain (2011) Stratified-charge two-stroke stepped-piston engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Majid, Abdul Majid (2005) 3D hardtissue database. In: International Symposium & Exhibiton on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World, 2005, Pulau Pinang.

Abdul Majid, Fadzilah Adibah (2010) Bromelain's activity and potential as an anti-cancer agent: current evidence and perspectives. Cancer Letters, 290 (2). 148 - 156.

Abdul Majid, Fadzilah Adibah (2003) the effects of cinnamomum zeylacium extract on the growth of cultures. In: International Conference On Advances In Strategic Technologies , 2003, Kuala Lumpur.

Abdul Majid, Fadzilah Adibah (2008) Evaluating pre-treatment methods in the isolation and purification of monoclonal igg antibody. Journal of Chemical and Natural Resources Engineering - Productivity Improvement Through Optimization, 2 (Sp Ed.). 1 - 10. ISSN 1823-5255

Abdul Majid, Fadzilah Adibah (2003) The glycosylation pattern of monoclonal antibody produced by cell lines overexpressing the anti-apoptotic gene BCL-2 in different culvitation systems. In: International Conference On Chemical and Bioprocess Engineering, 2003, UMS, Kota Kinabalu, Sabah.

Abdul Majid, Fadzilah Adibah (2003) The impact of BCL-2 overexpression on product mab glycosylation hybridoma cultures. In: International Conference On Advances In Strategic Technologies , 2003, Kuala Lumpur.

Abdul Majid, Marina (2001) Faktor komunikasi dan pengiktirafan terhadap keputusan kumpulan kecil dalam organisasi : satu kajian kes di Maktab Perguruan Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdul Majid, Masidah (2007) The legal aspect of procurement system : doctrine of variation order with respect to design and build procurement system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Majid, Norazman (2004) Observing ESL preschools acquire english through kidwatching. In: Qualitative Research Seminar, 2004, Universiti Malaysia Sarawak, Sarawak.

Abdul Majid, Roshida (2010) Rekabentuk tingkap dan pemandangan dalam pembangunan perumahan teres satu tingkat. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Abdul Majid, Zulkifli (2008) Failure analysis of natural gas pipeline. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 122 - 132. ISSN 1823-5255

Abdul Majid, Zulkifli (2008) Water jetting impact on natural gas pipeline. Journal of Chemical and Natural Resources Engineering - Productivity Improvement Through Optimization, 2 (Sp Ed.). 80 - 89. ISSN 1823-5255

Abdul Majid, Zulkifli and Mohsin, Rahmat and Nordin, Nor Faizal (2006) A study on air-fuel mixing system for NGV motorcycle system. In: Advanced Gas Technology 1. Penerbit UTM, Johor , 29 - 56. ISBN 978-983-52-05989-9

Abdul Majid, Zulkifli and Yaacob, Zulkefli and Mohsin, Rahmat (2006) Emission and performance evaluation of motorcycle. In: Advanced Gas Technology 1. Penerbit UTM, Johor , 77 - 94. ISBN 978-983-52-05989-9

Abdul Manaf, Azima (2007) Pendekatan institusi dalam menghuraikan permasalahan tanah terbiar. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Abdul Manaf, Azizah (2006) Digital watermarking and data hiding techniques. In: Proc. Postgraduate Annual Research Seminar 2006 (PARS 2006) , 2006, n/a.

Abdul Manaf, Azizah (2006) A new improved data hiding technique. In: Proc. Postgraduate Annual Research Seminar 2006 (PARS 2006) , 2006, UTM.

Abdul Manan, Zainuddin (2003) New advanced in process in integration research. In: Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Abdul Manan, Zainuddin (2003) Teargetting the minimum water and energy usage in water utilisation network. In: Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Abdul Manan, Zainuddin (2003) Thermodynamic modelling of glycerine refining process. In: Symposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Abdul Mokti, Mohamad Fairuz (2010) Kepuasan pengunjung terhadap perkhidmatan fasiliti di hotel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Mukti, Mohd. Afifi (2004) Design of a high wing transport aircraft model for wind tunnel. In: Proceeding Of The National Aerospace Conference University, 2004, n/a.

Abdul Munaim, Abdul Munaim (2007) The performance of enzymatic membrane reactor in synthesizing cyclodextrins from tapioca starch. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Abdul Mutalib, Ahmad Firdauz (2011) Pembangunan pengetahuan yang diperlukan dalam bidang pengurusan fasiliti di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul rahim, Mohd. Fadzil (2004) Numerical analysis of scavenging and combustion process in stepped-pistone engine. In: JGSEE And Kyoto University Joint International Conference On Sastainable Energy And Environment , 2004, Thailand.

Abdul Rahim, Sharul Kamal (2010) Adaptive antenna on cascaded butler matrices system. Microwave and Optical Technology Letters, 52 (4). 847 - 849.

Abdul Rahman, Alias (2003) Developing web-based multi-dimensional GIS-conceptual framework. In: International Symposium & Exhibition On Geoinformation, 2003, Shah Alam , Selangor.

Abdul Rahman, Azizah (2003) Model kualiti servis sistem maklumat dalam konteks institut pengajian tinggi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Rahman, Mohd. Shahril (2011) Pemanfaatan ruang pengajaran dan pembelajaran institusi pengajian tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Rahman, Muhammad Aminullah (2011) Theoritical-operating resonant frequency for cylindrical thermoacoustic resonators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Noor Azah (2008) Comparison of bulk specific gravity by saturated surface dry method and vacuum sealing method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Nur Shamsiah (2009) Tinjauan ke atas penguasaan kemahiran teknologi maklumat di kalangan pelajar tahun akhir Fakulti Pendidikan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Rahman, Roselainy (2008) Implementing strategies to invoke student's use of mathematical thinking powers in engineering mathematics. In: International Congress on Mathematics Education, 2008, Mexican Mathematical Society , Monterrey, Mexico.

Abdul Rahman, Roslan (2003) Utilisation of numerical and experimental method in noise reduction 2-stroke cycle gasoline engine. In: Asia Pacific Vibration Conference 2003, 2003, Gold Coast, Australia.

Abdul Rahman, Siti Fatimah (2012) Development of embedded capacitive sensor for monitoring corrosion of reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Tharek (2003) Design and performance analysis of adaptive transmit power cont point-to-point microwave link for rain attention problem. In: IEEE Symposium on Computer and Communications, 2003.

Abdul Raof, A. H. (2004) The learner and the workplace: fosterng real interactions. In: Seminar Helwanis II, 2004, n/a.

Abdul Rashid, Rosmalina (2012) Destination images and key factors influencing tourists' decision making visiting Sabah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rashid , Nadia Farhana (2010) Permasalahan yang dihadapi dalam penubuhan tadika. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Rasih, Radzi (2012) Solar absoprtion thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rauf, Siti Hajar (2009) The decision making process in spin-offs formation : a case study at UTM and UPM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdul Razak, Lway Faisal (2011) Coexistence of international mobile telecommunications advanced system with fixed satellite services receiver in 3400-4200MHz frequency band. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Razak, Noor Zainab (2004) Students' motivation to learn english via internet. In: International Education Conference, 2004, Sarawak.

Abdul Satar, Shamsul Bahri (2010) Project development in Iskandar Malaysia's educity : managing infromation technology consultants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdul Talib, Norhamiza (2009) Explicit corrective feedback in writing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Wahab, Abdul Razak (2009) Laman web pendidikan alam sekitar berasaskan pendekatan kontekstual. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Wahab, Aminah (2009) Peranan pengetua sekolah pelaksana perubahan di sekolah-sekolah menengah daerah Gombak Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdul Wahab, Mohamad Ikbar (2011) Quality improvement at a precision part manufacturing company using six sigma methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Wahid, Mazlan (2010) Effect of free stream turbulence on NOx and soot formation in turbulent diffusion CH4-air flames. international Communications in Heat and Mass Transfer, 37 (6). 611 - 617.

AbdulAziz Ali Asaad, AbdulWahab (2012) Industrialized building system survey in Yemen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulaziz M. Al-hetar, Abu Sahmah M. Supa’at, A. B. Mohammad, and I. Yulianti,, (2008) Thermal analysis for ridge and buried waveguides with a metal heater. In: International RF and Microwave (RFM) Conference, 2008, UiTM Shah Alam, Selangor.

Abdulkadir, Mohamed Hagi (2012) Security awareness framework of mobile phones from user's perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulkadir, Said Jadid (2012) Three-term back propagation neural network for moisture prediction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Abdul Hadi (2008) Pengaplikasian pengajaran di kalangan guru Kemahiran Hidup Bersepadu (KHB) sekolah menengah : satu tinjauan di daerah Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdullah, Abdul Hanan (2004) A data analysis for intrusion detection using principal component. In: Conference of Telematics System, Service and Applications , 2004, n/a.

Abdullah, Abdul Hanan (2004) A data reduction for intrusion detection using principal analysis. In: ECTI Annual Conference, 2004, n/a.

Abdullah, Abdul Rahim (2011) Time-frequency analysis for power quality disturbances detection and classification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Athira (2012) The practices of corporate social responsibility among construction companies in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdullah, Azhar (2000) An analysis of Malaysia France Institute's Technical Department - industry relationship. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdullah, Che Noni (2000) Aplikasi analisis regresi berbilang (MRA) dan sistem maklumat geografi (GIS) dalam penentuan nilai harta tanah kediaman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdullah, Fadhlin (2005) Preliminary findings of the research on the profile of the quantity surveying practice in Malaysia. In: QS National convetion 2005, 2005, Kuala Lumpur.

Abdullah, Habiburrohman (2003) The effect of magnetic treatment on suspended solid aand organic removal in wastewater. In: IWA Conference On Environmental Biotechnology, 2003, Kuala Lumpur.

Abdullah, Isah Umar (2012) Heat exchanger network operating and capital costs trade-off considering individual stream temperature difference contribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Abdullah, Ismail (2010) Kajian tahap kepuasan pelanggan terhadap kualiti perkhidmatan fasiliti bangunan tempat kerja di Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdullah, Izzatul Akilin (2012) Pembelajaran berkonsepkan teori perkembangan kreativiti walls dalam persekitaran Web 2.0 dan kesannya terhadap pemupukan daya kreativiti pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdullah, Jayaram Vaithinathan @ Mohd. Jaya (2012) Performance evaluation of free space optic transmission systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Md. Said @ Mohd. Zaid (2003) Kesan pembinaan jambatan Sultan Mahmud terhadap pembangunan harta tanah di Pulau Duyong, Kuala Terengganu, Terengganu Darul Iman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdullah, Mohd. Khasri (2010) Penggunaan kaedah rundingan bagi projek pembangunan oleh agensi kerajaan : Kajian Kes : Urusan rundingan projek-projek kerajaan di Negeri Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah, Mohd. Noor (2009) Potential of electricity saving and co2 reduction from the implementation of energy-efficient refrigerator and air conditioner program for residential sector in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Mohd. Shahidan and Abd. Manaf, Azizah (2010) Multiple layer reversible image watermarking using enhancement of difference expansion techniques. In: The 2nd International Conference on 'Networked Digital Technologies' (NDT 2010), 7-9 July 2010, Charles University, Prague, Czech Republic.

Abdullah, Muhammad Hisyam Lee and Javedani, Hossein and Suhartono, Suhartono (2010) An evaluation of some classical methods for forecasting electricity usage on specific problem. In: The Regional Conference on Statistical Sciences (RCSS'10), 13-14 June 2010, New Pacific Hotel, Kota Bharu, Kelantan.

Abdullah, Muhammad Madi (2010) Linking supervisor's role in training programs and motivation to learn with job performance perceptions of UTM KL non-academic employees. In: n/a, 28-29 July 2010, Kota Kinabalu,Sabah.

Abdullah, Muhammad Syafiq Sim (2009) Tahap kompetensi pensyarah Institut Pendidikan Guru Malaysia Kampus Temenggong Ibrahim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdullah, Muhd. Zailani (2010) Hubungan di antara kecerdasan emosi (EQ) dengan stres dalam kalangan anggota unit pasukan Gerak Marin Wilayah (2), Polis Diraja Malaysia, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdullah, Noor Hazzarita (2012) Synthesis and catalytic studies of barium and strontium exchanged ETS-10 in knoevenagel condensation reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah, Nor Hafizah Hanis (2011) Empirical correlation for estimation of unsaturated soil shear strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Norhayati (2012) Development and microbial characterization of aerobic granulation using palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Abdullah, Nurol Akmal (2009) Kepimpinan transformasi bagi pengetua dan amalan sekolah berkesan di empat buah sekolah menengah di daerah Tanah Merah Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abdullah, Rahayu (2008) Liable parties for unifixed materials and goods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Redzuan (2010) Closure to determination of composite slab strength using a new elemental test method. Journal of Structural Engineering, 136 (8). 1033 - 1034.

Abdullah, Roslina (2003) Design, modeling and simulation of 5kw fuel cell on board power generation system. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Abdullah, Rusli (2004) Applying multimedia technologies to facilitate knowledge sharing facilitation in learning organization. In: National Conference on Computer Graphics & Multimedia, 2004, n/a.

Abdullah, Rusli (2004) The development of knowledge management system for public learning in collaborative environment using lotus notes sofware. In: Knowledge Management International Conference and exhibition , 2004, Pulau Pinang.

Abdullah, Sahadah (2010) A technique for balancing and smoothing multi-constraint assembly lines. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Abdullah, Siti Badariah (2010) Gaya pembelajaran dan pemilihan mod penyampaian latihan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdullah, Suhailah (2011) The characterization of titanium dioxide thin films doped with manganese dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah , Nazirah Mohamad (2010) Implementation plan for marine cadastre in peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdullah Aleidan, Fouziah Saleh (2009) A secure and enhanced high embeding capacity steganography based on pixel indicator algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdullah Arshah, Ruzaini (2012) Assessment instrument for integrated information system success in institutions of higher learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Mohammed Yayah, Abdulsalam (2012) Improving and-to-end delay of optical burst switching networks through enchanced burst-assembly and offset-time scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Sani, Ahmad and Ismail, Zulkifli (2006) Modularity concept in Traditional Malay House (TMH) in Malaysia. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Abdullah Sani, Sarah A'Fifah (2012) Finite element method for beam bending problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullahi, Mu'azu Mohammed (2011) Tree-induced deformation in unsaturated soils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdurahim, Mohd. Ezzad Iskandar (2010) Curing characteristics and tensile properties of natural rubber/expoxidized natural rubber-50 nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abg. Hasbollah, Dayang Zulaika (2012) Influence of moisture content on the strength index of shale and sandstone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abidin, Nor Hafizah (2012) Explication of urban planning problem via mass transportation theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

abidin Idid, Syed Zainol (2004) Dichotomy of urban regeneration program within conservation dustrict. In: Urban Design and Conservation Lectures and Workshop, 2004, n/a.

Abimbola, Awoyomi Oluwatoyin (2011) Landfill site selection for municipal solid waste disposal using GIS and multicriteria evaluation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abolfathi, Soroush (2011) Study of the wave run up in the swash zone by use of M5' model tree algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abron, Khatereh (2011) The effect of polypyrrole on mechanical, thermal and electrical properties of high density polyethylene/montmorillonite nanocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abu, Mohd. Yazid (2012) Performance evaluation of wire electro discharge machining on silicon carbide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Anoy (2009) Persepsi guru tentang keberkesanan program perkembangan staf (PPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abu Bakar, Azmi (2004) Pembangunan garis panduan amalan ukur kadaster berkoordinat Semenanjung Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abu Bakar, Aznizam (2010) Comparative study of the effects of chlorinated polyethylene and acrylic impact modifier on the thermal degradation of poly(vinyl chloride) compounds and poly(vinyl chloride)/(oil palm empty fruit bunch) Composites. Journal of Vinyl & Additive Technology, 16 (2). 135 - 140.

Abu Bakar, Aznizam (2010) A comparative study on the mechanical properties between acrylic and chlorinated polyethylene impact modified poly (vinyl chloride)/ oil palm empty fruit bunch composites: effect of accelerated weathering. Polymer-Plastics Technology And Engineering, 49 . 359 - 366.

Abu Bakar, Aznizam (2004) Mechanical properties and processability of oil palm empty filled unplasticised poly (vinyl chloride) composite. In: JIRCAS International Symposium, 2004, USM Pulau Pinang.

Abu Bakar, Aznizam (2004) Thermal degradation and mechanical properties of oil palm bunch-filled unplasticised poly ( vinyl chloride) composite. In: Thermal Analysis Conference , 2004, n/a.

Abu Bakar, Noraziah (2009) Tahap kompetensi guru penasihat dalam amalan pengurusan aktiviti kokurikulum (Unit Beruniform) di sekolah menengah luar bandar daerah Temerloh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abu Bakar, Rosli (2003) Analysis of scavenging process in a new two stroke scavenging engine. In: Internatinal Conference on Advances in Strategic Technologies, 2003, Kuala Lumpur.

Abu Bakar, Rosli (2004) Effect of heat transfer on cylinder wall during cooling computational fluid dynamics. In: Malaysian Science And Technology Congress, 2004, n/a.

Abu Bakar, Rosli (2003) Effect of swirl device in a Compressed Natural Gas (CNG) engine. In: International Conference on Recent Advances in Materials, Mineral Environment, 2003, Penang, Malaysia.

Abu Bakar, Rosli (2003) An investigation of the response surface methodology in calibrating the ignition control module spark timing look-up table. In: Malaysian Science and Technology Congress, 2003, Kuala Lumpur.

Abu Bakar, Rosli (2003) A practical approach using RSM for calibrating the ignition con module spark timing look-up table. In: Internatinal Conference on Advances in Strategic Technologies, 2003, Kuala Lumpur.

Abu Bakar, Rosli (2003) Swirl device characteristic analysis in intake manifold. In: International Conference on Advanced In Strategic Technologies , 2003, Kuala Lumpur.

Abu Bakar, Roslina (2009) Kajian terhadap penggunaan perisian dan perkakasan multimedia di kalangan guru dalam P & P di sekolah menengah zon Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abu Bakar, Saiful Anuar (2004) Full state feedback controller of an active suspension half car models using non linear actuator. In: National Conference On Engineering And Technology, 2004, Kuala Lumpur.

Abu Bakar, Sakhinah (2004) Message transmission model in dense graphs for ad hoc network. In: Annual Fundumental Science Seminar, 2004, UTM, Skudai.

Abu Bakar, Zaleha (2010) Hutan bandar sebagai taman rekreasi di kawasan perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Hassan, Mohd. Ariffin and J., Tan and D. K., M. Ong and Ramlan, A. A. (2006) A preliminary study on zeta potential for chemical pre-treatment of Palm Oil Mill Effluent (POME). In: 11th Apcche Congress 2006, 2006, Kuala Lumpur.

Abu Samah, Rozaimi (2004) Thermostable pullulanse from basillus flavothermal KWF-1. In: Symposium Of The Malaysian Society For Microbiology , 2004, n/a.

Abu Sin, Nuruladilah (2010) Pelaksanaan pasar tani konsep moden : kajin kes : pasar tani moden Jerantut, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Yazid, Zaidatul Nadiah (2010) Komunikasi doktor-pesakit dan kemahiran pencarian maklumat : kajian kes di Hospital Tuanku Ampuan Najihah, Kuala Pilah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abubakar, Muhammad (2012) Factors affecting conformity to residential standards in Fadaman Mada Bauchi Metropolis, Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abubakar, Sani Balarabbe (2012) The elements identification of green highways in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abubakar, Zubairu (2012) Microwave assisted pyrolysis of oil palm shell (OPS) biomas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abul Hossain, Khandoker (2004) Application of ammonia based SNCR system for nox reduction burner exhaust. In: Symposium of Malaysian Chemical Engineer, 2004, n/a.

Abul Hossain, Khandoker (2003) Promoted selective non-catalytic reduction of nox from combustion effluent. In: International Symposium On Renewable Energy: Environment Protection Energy Solution for Sustainable Develpoment, 2003, Kuala Lumpur.

Adam, Mohd. Rashdi (2008) Isu perletakan dan pengurusan terminal bas makmur : satu kajian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Adam , Siti Jaliah (2010) Pendapat pihak penghuni dan pengurusan pangsapuri terhadap pemilihan kaedah pengutipan caj perkhidmatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Adam Salih, Ashraf AbdulRahman (2010) Ultra wideband butler matrix beam forming network using multilayer technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ade, Bilau Abdulquadri (2011) The development of small and medium sized construction firms in Nigeria using absorptive capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ade Setiawan, Ade Setiawan (2010) Study about teacher certification and its influence toward teacher professionalism development at Vocational School in Batam, Riau Islands Province, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Adeli, Ali Mahdavi (2010) Application portfolio management : framework and operational tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Adi Maimun, Nurul Hana (2011) Spatiotemporal autoregressive model for Malaysian housing market analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Adil, Mohammad (2004) Factor affecting the pore development in preparing highly activated carbon from palm kernel shell and coconut shell chemical activation method. In: Simposium Kimia Analisis Malaysia , 2004, n/a.

Adiwati, Shinta (1999) Project delays recovery on construction work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Azlan (2003) Performance of zigzag base isolator using finite element modelling find the stiffness. In: Asia Pacific Structural Engineering and Construction Conference (APSEC), 2003, Johor Bahru, Malaysia.

Adnan, Azlan (2004) The suitability finite element modelling method of offshore structure analysis. In: Seminar Penyelidikan Kejuruteraan Awam , 2004, n/a.

Adnan, Mohd. Zahirin (2010) Proses pembangunan tanah di bawah seksyen 204D Kanun Tanah Negara 1965 di Pejabat Tanah daerah Tampin, Negeri Sembilan Darul Khusus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Adnan, Najwa (2008) Kajian permasalahan dalam pelaksanaan sistem e-tanah di Pentadbiran Tanah Pulau Pinang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Adnan, Ruhila (2012) Perkaitan antara kefahaman dan kesediaan guru Matematik tahun 1 dan tahun 2 terhadap pelaksanaan Pentaksiran Berasaskan Sekolah (PBS) sekolah di daerah Pasir Gudang, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Adriansyah, Andi (2007) Particle swarm fuzzy controller for behavior - based mobile robot. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Adriyansyah, Andi (2004) Designing hybrid intelligent system for motion planning of robot. In: Seminar SITIA, 2004, Surabaya.

Adwani Asmael, Ebtessam Bashir (2011) The effects of asynchronous collaborative learning networks on students' learning performance and satisfaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Adzis, Zuraimy (2012) Locating nearby cloud to ground lightning from measurements of induced voltages on overhead conductor's ends. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Afgani, Yendo (2005) Kemapanan luar bandar : satu kajian ke atas pengamalan sikap dan prinsip hidup mapan pada komuniti Pasemah Kabupaten Lahat, Sumatera Selatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Afifi Huspi, Hishammudin (2012) Pulse detonation engine performance and thrust improvement using ejector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ag. Besar @ Ismail, Ag. Musa (2010) Kepentingan dan penguasaan kemahiran generik dalam kalangan pelajar : dari perspektif pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Aghda, Majid Rafiee (2010) Wideband printed antenna design for cognitive radio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Abd Manan (2003) An artificial life simulator using cellular automata and object-oriented techniques. In: Seminar On Artificial Intelligence Applications In Industry, 2003, Kuala Lumpur.

Ahmad, Abdul Rahim (2003) Comparative study if SVM tools for data classification. In: 1st Region Malaysia-France Workshop On Image Processing In Vi System and Multimedia Communication, 2003, Kuching, Sarawak.

Ahmad, Abdullah Sani (2004) Business process for archietectural design brief. In: Management in Construction Research Association, 2004, n/a.

Ahmad, Abdullah Sani (2004) Imej dan identiti seni landskap melayu tradisi. In: Persidangan Antarabangsa Peradaban Melayu, 2004, n/a.

Ahmad, Abdullah Sani (2004) Pandangan umum terhadap proses pengurusan 'brief' dalam rekabentuk. In: Management in Construction Research Association, 2004, Langkawi.

Ahmad, Abdullah Sani (2005) Pengaruh pasu hiasan lanskap terhadap persepsi budaya Melayu. In: Seminar Za'ba Mengenai Alam Melayu II (2005), 2005, Kuala Lumpur, Malaysia.

Ahmad, Ahmad Sukri (2011) Design of multipoles wind generator for low wind speed wind turbine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Anuar (2003) Digital close range photogrammetry: calibration of different sensor using different test field and application. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Ahmad, Anuar (2004) Digital orthophoto : a potential data source for urban GIS. In: International Convention on Urban Development and Management , 2004, Langkawi.

Ahmad, Anuar (2003) Four dimensional motion tracking using low cost digital video cam. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Ahmad, Arshad (2010) 4-Lump kinetic model for vacuum gas oil hydrocracker involving hydrogen consumption. Korean Journal of Chemical Engineering, 27 (4). 1099 - 1108.

Ahmad, Arshad (2010) 6-lump kinetic model for a commercial vacuum gas oil hydrocracker. International Journal of Chemical Reactor Engineering, 8 .

Ahmad, Arshad (2008) Estimation of fatty acid composition using pls-based model. Journal of Chemical and Natural Resources Engineering - Productivity Improvement Through Optimization, 2 (Sp Ed.). 58 - 71. ISSN 1823-5255

Ahmad, Arshad (2008) Inferential estimation and control of fatty acid distillation column using artificial neural network. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 59 - 73. ISSN 1823-5255

Ahmad, Arshad (2003) Pipeline leak detection system in a palm oil fractional plan artificial neural network. In: Proceedings of International Conference on Chemical and Bioprocess Engineering, 2003, Kota Kinabalu, Sabah.

Ahmad, Azhana (2008) The exact number of conjugacy classes for 2 - generator p - groups of nilpotency class 2. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Ahmad, Azman (1999) The influence of working experiences in generating leadership skills in Malaysia France Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Azmiyantie (2012) Quality improvement of electroless nickel process used in hard disc industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Farediah (2010) Chemical constituents from tiger's betel, Piper porphyrophyllum NEBr. (Fam. Piperaceae). Natural Product Research, 24 (4). 387 - 390.

Ahmad, Fauziah (2010) The branding realization of entrepreneurs in small and medium sized enterprises. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Ahmad, Husin (2004) Laboratory studies on amodified lighting protection system laser aided ionization of air. In: International Conference on electrical and Computer Engineering, 2004, n/a.

Ahmad, Hussein (2010) Characteristics of electric and magnetic fields in the vicinity of a quadruple electric power line. International Journal of Emerging Electric Power Systems, 11 (2). ISSN 1553-779X

Ahmad, Jaardi (2009) Perkaitan antara tahap tabiat minda fleksibiliti dan adaptabiliti dengan pencapaian pelajar : kajian kes terhadap pelajar Fakulti Pendidikan Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Jamilah (2009) Kajian kes tujuh habit orang yang paling berkesan dalam kalangan guru Program Sarjana Pengurusan dan Pentadbiran Pendidikan UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Khairudin (2000) Rawatan air sisa kilang kelapa sawit menggunakan turus anaerobik terpadat dan tanpa padatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ahmad, Maizah Hura (2004) Handling multicollinearity problems in regression analysis. In: Simposium Kebangsaan Sains Matematik, 2004, n/a.

Ahmad, Mat Noh (2007) Kelewatan dalam proses pembangunan harta tanah kediaman di Langkawi : kajian kes projek perumahan Yaman Nilam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ahmad, Mohamad Rosyidi (2010) Characterization of micromaterial in the palm oil ashes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Mohd. Azlan (2003) Penyaringan dan pencirian bakteria pengurai asid 3-Kloropropion (3CP). In: Scientific Meeting of Malaysian Society for Molecular Biology and Biotechnology, 2003, Langkawi, Kedah.

Ahmad, Mohd. Fa'iz (2009) Tahap kesedaran staf UTM terhadap keselamatan pekerjaan di makmal dan bengkel kejuruteraan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Mohd. Ridzuan (2003) Multi-agent robotic system for carrying large loads. In: International Conference on Mechatronics Technology, 2003.

Ahmad, Noor Azlinda (2010) Characteristics of narrow bipolar pulses observed in Malaysia. Journal of Atmospheric and Solar-Terrestrial Physics, 72 . 534 - 540.

Ahmad, Nor Azlina (2012) Anti-tyrosinase and cytotoxicity activity of synthetic compound, 2'-hydroxy-3,4,3'4'-tetramethoxychalcone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Ahmad, Nor Farah Atiqah (2012) Field evaluation of infiltration models under oil palm plantation with reference to stemflow & througfall areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Norhayati (2009) Kecerdasan emosi (EQ) dan hubungannya dengan tahap kepuasan terhadap kerjaya dalam kalangan guru Sekolah Menengah Kebangsaan Nitar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Norhayati and Sueyoshi, Hidekazu (2010) Densification and mechanical properties of electroconductive Si3N4- based composites. In: 2nd ISESCO International Workshop and Conference on Nanotechnology Kuala Lumpur, Malaysia., 25-27 Jan 2010, Kuala Lumpur, Malaysia.

Ahmad, Norlaily (2009) Biosorption of chromium (VI) by chitosan immobilized. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad, Nurul 'Uyun (2011) Physicochemical properties of newly formulated coconut-chocolate spread and its stability study using moisture sorption isotherm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Putri Aidawati (2000) Application of signal analysis techniques for condition monitoring of a wire-bonding machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Rabi'atul Adawiyah (2011) Cinnamon extract as antihyperglycemia in diabetic rats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Rahimah (2008) Pembelajaran berasaskan konsep konstruktivisme dalam menyelesaikan masalah fizik pelajar sains di Sekolah Menengah Teknik daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Rashdi Shah (2003) Development of magnetic sensor seismic instrumentation. In: Asia Pacific Structural Engineering and Construction Conference (APSEC), 2003, Johor Bahru, Malaysia.

Ahmad, Rohaiti (2000) Keperluan analisis kerja dalam pembangunan organisasi di Kolej Islam Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ahmad, Rohanin (2003) An iterative algorithm for optimal control of a robot manipulator. In: Seminar on Artificial Intelligence Applications in Industry , 2003, Kuala Lumpur.

Ahmad, Rokiah @ Rozita (2006) One-step explicit methods for solving stiff differential equations. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Ahmad, Roslee (2011) Kesan bimbingan kelompok pendekatan Al-Ghazali dalam menangani penyelewengan tingkah laku seksual di kalangan pelajar sekolah menengah di Johor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Roslee (2004) Pendekatan kaunseling kelompok untuk menangani masalah emosi di kalangan anak-anak yatim di asrama pertubuhan anak-anak yatim Negeri Johor. In: Seminar Kebangsaan PBW ke-22, 2004, Bangi.

Ahmad, Roslee (2004) Ways to implement drug rehabilitation programme : an island mode Malaysia. In: Association of Psycological and Educational Counsellors of Asia Pacific Biennial International Conference, 2004, n/a.

Ahmad, Siti Fatimah (2009) Pengaplikasian ICT dalam pengajaran dan pembelajaran Pendidikan Islam : kajian di kalangan graduan SPI UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Tahir (2003) Duality of Fuzzy Topographic Topological Mapping. In: International Conference on Advancement in Science and Technology, 2003.

Ahmad, Tahir (2010) EEG signals during epileptic seizure as a semigroup of upper triangular matrices. American Journal of Applied Sciences, 7 (4). 540 - 544.

Ahmad, Tahir and Abu Bakar, Sumarni and Baharun, Sabariah (2010) Transition probability matrix for fuzzy autocatalytic set of fuzzy graph. Advances and Applications in Mathematical Sciences .

Ahmad, Umi Kalthom (2004) Determination of polychlorinated biphenyls in oils and sewage. In: Simposium Kimia Analisis Malaysia, 2004, n/a.

Ahmad, Umi Kalthom (2004) Development of extraction procedures for the analysis of polycy aromatic hydrocarbons and organochlorine pesticides in municipal sewage sludge. In: Seminar Resources from Sludge : Forging New Frontiers, 2004, Singapore.

Ahmad, Umi Kalthom (2003) Forensic analysis of arson accelerants in fire debris : optimization of headspace-SPME. In: Persidangan Sempena Pameran Penyelidikan dan Pembangunan IPTA, 2003, Kuala Lumpur.

Ahmad, Umi Kalthom (2003) Forensic analysis of shoe polish stains on several fabrics. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ahmad, Ummul Khair (2004) Penterjemahan ilmu peringkat tinggi dan sumbangannya dalam industri perbukuan negara. In: Program Sehari Bersama Penerbit, 2004, n/a.

Ahmad, Wan Azlina (2004) Biorecovery of Sg. Lembing tin mine by product using adapted St of acidithiobacillus ferrooxidans. In: ARRPET National Workshop, 2004, n/a.

Ahmad, Wan Azlina (2004) Biosorption of Cr(VI) by non-living acinetobacter calcoaceticus genospecies 3 and clavibacter agropyri isolated from a textile effluents. In: ARRPET National Workshop, 2004, n/a.

Ahmad, Wan Azlina (2003) A study of the biosorption of Cr(VI) using bacteria isolated F textile wastewater. In: National Biotechnology Seminar : DNA 50 Years and Beyond 2003, 2003, Selangor.

Ahmad, Yusof (2010) Bending behavior of timber beams strengthened using fiber reinforced polymer bars and plates. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Ahmad, Z. and Ujang, Z. and Yunus, S. and Damayanti, A. and Olsson, G. (2008) A novel approach for palm oil mill effluent (POME) treatment and recovery using hybrid membrane bioreactor (MBR). In: Asiawater 2008 Conference, 2008, Kuala Lumpur Covention centre.

Ahmad, Zaini (2010) Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading. international Journal of Impact Engineering, 37 (5). 475 - 488.

Ahmad, Zulkefli (2010) Perlakuan agresif dalam kalangan pelajar alaf baru dan hubungannya dengan stail kekeluargaan masa kini. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Zuraimey (2009) Stres kerja dalam kalangan guru-guru akademik di lima buah sekolah daerah Segamat Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad , Hamidah (2010) Profil pemilik dan keutamaan faktor yang mempengaruhi perpindahan pemilik daripada kediaman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad @ Mohamad, Norhani (2008) Hubungan gaya pembelajaran dengan pencapaian akademik di kalangan pelajar Sarjana Muda Pendidikan tahun pertama Sesi 2008/2009, Fakulti Pendidikan, UTM, Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad Alwi, Ahmad Afzan (2008) Drilling of stainless steel AISI 630 H1075 using different type of TiAIN carbide drill. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Fadzlilah, Nurrulhidayah (2010) Quantitative analysis of acidic sites of solid acid catalysts by pyridine pre-adsorbed FTIR spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Fauzi, Ismail and Mustaffa, Azeman and D. Kusworo, Tutuk (2006) Oxygen enrichment properties of polyethersulfone/polyimide blends-zeolite 5A mixed matrix membranes. In: Proceeding of the 20th Symposium of Malaysian Chemical Engineers 2006, 2006, Shah Alam, Selangor.

Ahmad Idris, Nurul Hazerin (2010) Kajian tahap kepuasan penghuni bangunan sakit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad Kamaroddin, Mohd. Farizal (2011) Statistical optimization of lignocellulases by locally isolated aspergillus niger EFBI in stirred tank reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Ahmad Noor, Arshad (2003) Hybrid estimator for chemical product composition. In: Artificial Intelligence Application In Industry, 2003, Kuala Lumpur.

Ahmad Nordin, Ahmad Farid (2010) Tahap amalan keselamatan buruh di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad Pua'at, Hafizah (2010) requirement on features analysis for online collegestreet portal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad Rodzo'an, Nor Shahirah (2012) Time series approach solving crosswind problem on ground vehicle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Sabri, Nur Nazrina (2012) Environmental-friendly ballpoint and highlighter ink using pigments from chromobacterium violaceum and serrtia marcescens. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Tajuddin, Aniesma Niza (2009) Tahap literasi ICT dalam kalangan guru pelatih DPLI, UTM dan kesediaan mengaplikasikan ICT dalam pengajaran dan pembelajaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad Tajuddin, Ruzaini (2009) Pengaruh motivasi terhadap pencapaian akademik pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad Tajudin, Mohamad Hafiz (2003) N-Methyl-N-Propylpyrrolidinium Tetrafluoroborate: New Solvent Heck Reaction. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ahmad Zaini, Muhammad Abbas (2010) Adsorption of heavy metals onto activated carbons derived from polyacrylonitrile fiber. Journal of Hazardous Materials, 180 (1-3). 552 - 560.

Ahmadi, Mohammad (2012) Interaction between diaphragm and shear wall for instability resistance of structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmadi, Mohammad Taghi (2010) Carbon nanotube and silicon nanowire nanoscale field effect transistor modeling. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ahmadi, Mohammad Taghi and Ismail, Razali and Yau, Wei Heong (2010) Carrier drift velocity in non parabolic band structure of carbon nanotubes. In: 2010 International Conference on Nanoscience and Nanotechnology (ICONN 2010), 22 - 26 Feb 2010, Sydney, Australia.

Ahmadianchashmi, Rouzbeh (2012) Evaluation of end milling titanium alloy Ti-6A1-4V using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmat Nor, Nor Irwan (2006) Rainfall - runoff modeling using artificial neural network method. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Ahmat Nor, Nor Irwan (2010) Sistem pengurusan kualiti sumber air kajian kes: loji air Sri Gading,SAJ Holdings SDN BHD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ahmed, Aboamama Atahar (2010) Grid mapping function for automatic resources discovery and selection for sequential and parallel visualization pipeline. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Ahmed, Adel Ali (2007) Secure real-time routing protocol for wireless sensor networks. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ahmed, Kamal (2012) Subjective and objective weighting methods in multiple criteria decision making used in water resources. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed, Mahmoud Ali (2004) Ship surface generation using nurbs with hybrid parameterization method. In: Regional Conference on Marine Technology, 2004, n/a.

Ahmed, Marwah Yousif (2011) High altitude platform station gateway links coexistence with fixed satellite service at (5850-7075) MHz. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed, Mohammad Masroor (2010) A parameteric model for the segmentation of brain magnetic resonance images. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Ahmed, Mohammad Masroor (2004) Speech recognition. In: International Conference On Computer Graphics And Multimedia , 2004, n/a.

Ahmed, Osama Mohamed Abdelsalam (2009) Configuration of street corners and its relationship with urban resident' behaviour : a case study of Melaka city. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmed Al- Hamed, Ghulam Fadel (2011) Patterns and transport pathways of aerosols in Peninsular Malaysia using MODIS aerosol data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmed Alashwal, Hany Taher (2007) Protein-protein interactions prediction using support vector machines. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Ahmed Bamaga, Saleh Omar (2010) The effects of POFA from different sources on durability of high strenght concrete in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Eldrainy, Yehia Abd. Elmonem (2012) Enhancement of palm oil blends atomization and spray using swirling flow. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Memon, Zubair (2004) Utilization of photogrammetry techniques to digitalize the construction site progress. In: Proceedings of the World IT Conference for Design and Construction, 2004, Langkawi, Kedah.

Ahmed Mustafa, Esam Mohamed (2010) New motivational scheme and organizational performance enchancement : a case study of Alnil Academy in Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ahsanpour, Mohsen (2008) Urban space : Naghsh e Jahan Square in Esfahan-Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Aigul, Zhussupova (2011) Strategic framework of open source software adoption in the ministry of oil and gas of the republic of Kazakhstan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Aini Zainal , Hafizatul (2010) Permasalahan dalam pengurusan buku daftar strata di Pejabat Tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ajdar, Mohammadali (2011) Modification of chitosan based membrane using zeolite 5A for the separation of isopropanol-water system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ajmain @Jimaain, Safar (2006) Pengurusan masjid dalam memperkasakan pembangunan modal insan : suatu pengalaman Masjid Sultan Ismail, UTM Skudai. In: n/a, 2006, n/a.

Akang, Rosnie (2010) Neutron field perturbation in large sample activation analysis using Monte Carlo code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Akhondzadeh, Hamed (2011) Eor by expanding solvent steam assisted gravity drainage in athabasca oil reservoir. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Al - Romaithi, Khalifa Mohamed Thani (2007) The development of a spatial data management centre in Abu Dhabi for implementation of National Spatial data Infrastructure in the United Arab Emirates (UAE). PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Al Amri, Abdullah Ali (2010) The performance of membrane bioreactor in treating high temperature municipal wastewater. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Al Fahmey Abdul Rahim, Mohammad Yussuf (2010) Sources of quit rent arrears. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Al- Harthy, Amur Salim Hamood (2006) The consultancy fee for structural design changes of reinforced concrete buildings in Oman. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Al-Agaga, Ameen Mahdi K. (2010) Factors that influence e-loyalty of internet banking users. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Al-Amdi, Sam Abdullah Hussein (2010) The relationship between leadership style and job satisfaction among academic in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Al-Dawamy, Aminuddin Ruskam (2004) Hiperrealiti : isu pembinaan nilai dalam pemikiran pasca moden. In: Seminar Antarabangsa Nilai Dalam Komuniti Pasca Modenisme, 2004, n/a.

Al-Hetar, Abdul Aziz Mohammed Ali (2010) Thermo-optic polymer switches based on multimode interference couplers. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Aladpoosh, Hamid (2012) The effectiveness of project management by stakeholders in enhancing project and stakeholder management. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alahdad, Rezvan (2010) Problems faced by married Iranian students at Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Alashwal, Hany Taher (2004) Predicting protein-protein interaction from primary structure support vector machines. In: International Conference on Bioinformatics , 2004, Auckland.

Alashwal, Hany Taher (2003) Reactive constraints agents and real time constraints processing algorithm for the dynamic timetabling problem. In: Seminar On Artificial Intelligence Application in Industry, 2003, Kuala Lumpur.

Alavi, Masoumeh (2011) Categories of problems among international students in a higher learning institution in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Alavi Ghahferokhi, Sayed Ehsan (2012) Indoor broadcasting using visible free space optic over broadband powerline communication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alhabieb, Omar Haitham (2012) Variable offset time for composite burst assembly with segmentation scheme in optical burst switching networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alhakimi, Wail Sultan Abdullah (2010) An investigation of market orientation in Yemen's consumer goods industry. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Ali, Abdul Salam (2009) Pengurusan kewangan guru-guru sekolah agama Kerajaan Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ali, Ahmad Hadi (2003) Diagnostic of laser plasma by using high-speed photographic tecnique and interfaced with image processing system. In: Malaysia-France Regional Workshop On Image Processing In Vision and Multimedia Communication, 2003, Sarawak, Malaysia.

Ali, Ahmad Hadi (2003) Optical breakdown and plasma formation induced by IR laser. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

Ali, Anasrudin (2011) Tinjauan kategori masalah MPCL dengan demografi pelajar-pelajar Sekolah Menengah Umum Negeri 11 Batam Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ali, Azizi Mohamad (2010) Isu dan masalah pelaksanaan kaunter ekspress di Unit Pendaftaran Pejabat Tanah kajian kes : Pentadbiran Tanah Negeri Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ali, Bayan Anwer (2012) Structural performance of cold-formed steel frame with bolted moment connections. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Irwan Shah (2011) Analysis of stack geometry effects on thermoacoustic with particle image velocimetry (PIV). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Jalil (2010) Dark soliton array generation : theory and experiment. Microwave and Optical Technology Letters, 52 (11). 2397 - 2400.

Ali, Jalil (2010) dark soliton generation using dual brillouin fiber laser in a fiber optic ring resonator. Microwave and Optical Technology Letters, 52 (4). 881 - 883.

Ali, Jalil (2010) Development of single mode fiber coupling coefficient using kinetic model. Optik - International Journal for Light and Electron Optics, 121 (24). 2240 - 2244.

Ali, Jalil (2010) An experimental investigation of multisoliton generation using an erbium-doped fiber amplifier and a fiber optic ring resonator. Microwave and Optical Technology Letters, 52 (1). 70 - 72.

Ali, Kherun Nita and Raja Mazlan, Raja Marzyani and Mustapa, Fara Diva and Aouad, Ghassan (2006) Understanding the business process of reactive maintenance projects. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Ali, Mohamad Idris (2004) Penggunaan teknik remote sensing dalam penanaman kelapa sawit : kawasan kajian Keluang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ali, Mohamad Wijayanuddin (2003) Advisory fault diagnosis system using model-based approach. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Ali, Mohamad Wijayanuddin (2003) Fault detection and diagnosis using process history based method. In: Simposium of Malaysian Chemical Engineers, 2003, Copthorne Orchid Hotel, Penang.

Ali, Mohd. Fadzli (2003) Distance education : balancing conventional learning and on-line learning. In: Malaysian Science & Technology Congress, 2003, Cititel Midvalley, Kuala Lumpur.

Ali, Mohd. Fadzli (2003) Potensi aplikasi Teknologi Virtual Reality (VR) dalam pembelajaran. In: Seminar Pendidikan, 2003, Johor Bahru.

Ali, Mohd. Fadzli (2003) Preparation amongs students of science with education programme implementing english as a medium of intruction to teach mathematics & science in schools : a study in science with education students UTM. In: International Conference on Teaching and Teacher Education, 2003, Kuala Lumpur.

Ali, Mohd. Tarmizi (2010) A reconfigurable antenna array and beam switching for 5.8 GHz point - to- multipoint applications. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ali, Nazri (2010) Bioengineering assessment on sloppy ground. American Journal of Environmental Sciences, 6 (4). pp. 357-364.

Ali, Omar (2008) Pelaksanaan pengajaran matematik dalam Bahasa Inggeris guru sekolah menengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ali, Raudhah (2010) Kompetensi dan personaliti guru kaunseling Sekolah Menengah di Bandar Raya Semenanjung Malaysia. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Ali, Rizwan (2012) Application of prevention through design concept into design process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Rusmidah (2008) Degradation studies on paraquat malathion using tio2/zno based photocatalyst. The Malaysian Journal of Analytical Sciences, 12 (1). 77 - 87. ISSN 1394-2506

Ali , Noorhalieza (2008) The usage of empty fruit bunch and palm pressed fiber as substrates for the cultivation of pleurotus ostreatus. Journal of Chemical and Natural Resources Engineering - Advances in Product Development, 2 (Sp Ed.). 60 - 66. ISSN 1823-5255

Ali Ahmed, Abdul Rahman (2012) Mobile anchor point selection in hybrid mobility management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Ahmed, Waleed (2012) Intelligent web proxy caching based on supervised machine learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Al-Rahmi, Waleed Mugahed (2012) Evaluating student's satisfaction of e-learning in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Elkali, Hana Abdulnnabi (2011) The relationship between language anxiety and self-esteem in learning a foreign language. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ali Hamood Abdullah, Al Jufaili (2008) Study on the comparison between local datum and geocentric datum with assessment using high resolution stellite data imagery for the orthophoto generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ali Mosleh, Khalid Yahya (2012) The effects of P53 on pancreatic cancer cells by apoptosis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Ali Saoud, Amer (2003) Study of eucalyptus essential oil acquired by microwave extract. In: World Congress On Medicinal and Aromatic Plants for Human Welfare, 2003, Chiang Mai, Thailand.

Ali Shah, Zuraini (2004) Component-based and web technology for bioinformatics application development. In: Malaysian Science and Technology Congress, 2004, Kuala Lumpur.

Ali Shah, Zuraini (2004) Interface definition language and object request broker for integration of distributed heterogeneous bioinformatics software. In: International Conference on Computer Graphics and Multimedia, 2004, n/a.

Alia Damayanti, Alia Damayanti (2011) Hybrid membrane bioreactor for biodegradation and biofouling reduction of palm oil mill effluent. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Amran (2004) The influence of rigid polyurethene foam as core material in automotive application. In: National Postgraduate Colloqium on Material ,Mineral And Polyurethene, 2004, Pulau Pinang.

Alias, Amran (2003) Rigidity of Foams Used As the Core of Side Dood Impact Beams. In: International Conference On Advances In Strategic Technologies, 2003.

Alias, Asmawati@Fatin Najihah (2004) Development of a programmable flshlamp circuit for optical pump. In: Regional Conference on Solid State Science And Technology , 2004, n/a.

Alias, Hajar (2003) On the rheotogy of carbon nanotubes. In: Asian Particle Technology Symposium 2003, 2003, Parkroyal Hotel & Resorts, Penang, Malaysia.

Alias, Mohd Nasir (2009) Service quality evaluation of container haulage in southern region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alias, Norma (2004) Communication issue for parallel alternating group explicit on a distributed memory archietecture. In: International Conference on Artificial Intelligence in Engineering, 2004, n/a.

Alias, Norma (2003) On some red black strategies of parabolic partial differential equation using PVM. In: Simposium Kebangsaan Sains Matematik, 2003, UMS, Sabah.

Alias, Rose Alinda (2004) Knowledge audit portal for higher learning institution. In: Knowledge Management International Conference and exhibition , 2004, Pulau Pinang.

Alias @ Che Rashid, Noor Izawati (2010) Isolation, expression and characterization of recombinant a-L-arabinofuranosidase from aspergillus niger ATCC 120120 in pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Alinaghian, Farnaz (2009) Meaning of streets perceived by users in urban centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alitabarimansor, Meisam (2011) Hydrolysis of virgin coconut oil using immobilized lipase in a batch reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Alizadehashrafi, Behnam (2012) Towards enhancing geometry textures of three-dimensional city elements. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Alkali, Salaheddin Abdunabli (2011) The use of activities in public space in Johor Bahru City Center. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alkhail Balubaid, Saeed Omer Ahmed (2012) Energy efficiency of toll plaza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Allahvirdias, Hamid (2012) Land surface temperature variation associated with Zarand earthquake observed from MODIS Terra. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Almabrouk Imrigha, Nada Abusalah (2011) Thermal fracture damage induced by diode pumped Nd: YVO4 laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Almasinia , Mohammad (2010) Determination of flow of pipeline in water distribution network using lidar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Alsadat Rahsepar, Shokouh (2012) Effect of substrate, redox mediator and aeration on biogranulation treatment of textile wastewater. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Alshehri, Dhafer Saad A. (2010) The shear behavior of steel fiber reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amat, Nurul Fauziana (2010) Impak teknostres terhadap komitmen organisasi di Perpustakaan UTM dan UTHM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Amat Mustajab, Mohd. Khairul Asyraf (2010) Nano structured metal oxide in base-catalytic transesterification of palm oil to biodiesel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ambar, Eruan Shah (2010) Tinjauan pasaran di Zon Selatan Program Ijazah Sarjana Muda Sains dan Pendidikan (Matematik) anjuran Fakulti Pendidikan, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Amin, Husni Za'iem (2012) Amalan ciri-ciri sekolah berkesan di Sekolah-sekolah Menengah Kebangsaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Amin, Khamidah (2004) Tahap kefahaman kemahiran memerhati dan membina hipotesis di kalangan pelajar tingkatan empat merentas gred sekolah. In: International Education Conference, 2004, Sarawak.

Amin, Khamidah (2003) Tahap kefahaman kemahiran memerhati membina hipotesis di kalangan pelajar tingkatan empat merentas aliran. In: International Conference on Teaching and Teacher Education, 2003, Kuala Lumpur.

Amin, Noraidura (2004) Fotodegradasi sebatian organik mudah meruap : perbandingan keberkesanan fotomakin TiO2 Dan ZnO. In: Simposium Kebangsaan Sains Matematik, 2004, n/a.

Amin, Norsarahaida (2010) A micropolar fluid model of blood flow through a tapered artery with a stenosis. Mathematical Methods in the Applied Sciences, 33 (16). 1910 - 1923.

Amiri, Iraj Sadegh (2009) The use of lidar system in determination of attenuation coefficient of transparent materials (water, glass and perspex) and range finding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Amiruddin, Roslan and Akasah, Zainal Abidin (2006) Maintenance management process model for school building : an application of IDEF modelling methodology. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Amri, Yul (2006) Combination of geodetic and geotechnical methods for deformation modeling by using of L1 - Norm and L2 - Norm estimations. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Amrin, Astuty (2004) Influence of oxidizing environment to the scale formation of the based intermetallics. In: International Material Technology , 2004, n/a.

Amrin, Astuty (2004) Oxidation behaviour of Ti-Al based intermetallics at 7000C -9000C in flowing dry air. In: National Conference on Science And Technology, 2004, Kuala Lumpur.

Amrin, Astuty (2004) Oxidation behaviour of Ti-Al based intermetallics at 900C. In: Regional Conference And Workshop On Solid State Science And Technology, 2004, n/a.

Ang, John Boon Liang (1999) Investing in the mature soya sauce market. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ang, Jun Chin (2011) Application of artificial neural network in two dimensional warranty modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Anggoro, Didi Dwi (2003) Modified oxidative coupling process of methane to liquid fuels over metal loaded ZSM-5 catalyst. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ani, Farid Nasir (2003) Application of oil palm shell phenolic resin as awood adhesives. In: National Seminar On Utilisation of Oil Palm, 2003, Hotel Nikko, Kuala Lumpur.

Ani, Farid Nasir (2004) Biomass as a renewable source of energy and value-added product. In: International Conference On Thermal engineering, 2004, n/a.

Ani, Farid Nasir (2008) Characterization of rice husk for cyclone gasifier. Journal of Applied Sciences, 8 (4). 622 - 628. ISSN 1996-3343

Ani, Farid Nasir (2004) Flow modeling to investigate the effect of riser exit the riser hydrodynamics of circulating fluidized bed. In: International Conference On Scientific And Engineering Computation, 2004, Singapore.

Ani, Farid Nasir (2003) Pyrolysis of oil palm wastes. In: Regional Conference On Energy Technology Towards A Clean Environment, 2003, Phuket, Thailand.

Ani, Farid Nasir (2004) Tribological properties of plant oils as potential industrial. In: International Conference On Thermal engineering, 2004, n/a.

Anjomshoae, Ali (2012) Assessment of musculoskeletal disorder and its association with psychosocial work factors among the bus drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Annamalai, Vasuthevan (2008) Data management of public bus operators in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Anoi, Sekam (2009) Hubungan antara tahap penglibatan dengan kaedah pembelajaran informal di Jabatan Siasatan Jenayah Narkotik Ibu Pejabat Polis Kontinjen, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ansari, Meisam (2011) The most efficient contribution of shear walls in dual structural systems in medium height buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aqlima Mat Zin, Nurul Nadia (2010) Masalah pembangunan rancangan kemajuan tanah (RKT) oleh kesedar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Arbabzadeh, Iman (2012) 3D modeling of orthogonal cutting on AISI 1045. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arif, Amin (2000) Persepsi guru dan staf sokongan terhadap gaya kepimpinan pengetua sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Arif, Noor Khairriah (2010) Profil personaliti guru cemerlang sekolah kebangsaan di daerah Kulaijaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ariff, Nurulhidayah (2009) Kajian penggunaan web 2.0 dari aspek perkongsian maklumat di Fakulti Pendidikan, Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ariffin, Jamilah (2004) The changing Malaysian family : tracing its changes through trend and research findings. In: Proceedings of the APFAM International Conference, 2004, Kuala Lumpur.

Arifin, Ahmad Jazree (2009) Tinjauan terhadap gaya pembelajaran pelajar tingkatan 4 dan 5 dan hubungannya dengan pencapaian akademik di SMK Kota Kulai, Kulaijaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Arifin, Ramli (2010) Sifat fizik, mekanik, optik dan spektroskopi kaca tellurit zink oksiklorida didopkan europium. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Aris, Azlan (2009) Perbandingan pola personaliti-persekitaran (P-E Fit) dan kongruen personaliti persekitaran (EAT) pelajar Kolej Komuniti Segamat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Aris, Mohd. Syawal (2010) Hubungan antara iklim organisasi dengan pendekatan pembelajaran di tempat kerja : kajian di kalangan Pegawai-Pegawai Tadbir dan Diplomatik gred M41 di Jabatan Perkhidmatan Awam Malaysia, Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Aris, Muhammad Farhan (2010) Built-in self-test method at register transfer level design for finite impulse response filter, infinite impulse response filter and greatest common divisor calculator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Arjmandi, Mohammadreza (2012) Damage evolution in carbon fiber-reinforced polymer (CFRP) composites under shear fatigue loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arjo, Roslaily @ Mohamad Khairi (2012) Strategies for improvement of upstream oil and gas facilities fabricator planning and scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arjunan, Satya (2003) A parallelizing interface for k-means type clustering algorithm neural network batch training. In: Seminar on Artificial Intelligence Applications in Industry , 2003, Kuala Lumpur.

Armaghani, Danial Jahed (2012) Prediction of flyrock in boulder blasting by using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arsad, Agus (2010) Compatibiliser effects on properties of polyamide-6/acrylonitrile-butadiene-styrene and polyamide-6/acrylonitrile-butadiene-styrene/short glass fibrethermoplastic composite. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Arshad, Noor Azalina (2009) Factors that influence the choice of an educational website as learning resource by teenage students. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Arumogam, Sunthar (2011) Effect of slope angle and soil properties on deformation and stability of cut slopes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arumugam, Nanthini (2012) Kefahaman, kesedaran dan amalan konsep kepelbagaian budaya di kalangan pelajar Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Asaad Zeki, Mohammad Ali (2010) Effectiveness of cathodic protection in addressing corrosion of reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asadi, Mahmood (2011) Information system for implementing Kanban. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Asadi, Mohammad Sadeq (2011) Hydrodynamic and sediment transport modelling in the Padas estuary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asadollahtehrani, Mahsa (2011) Characterization of polyaniline with nano zinc oxide as additives in epoxy coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ashenagar, Javid (2010) Comparative assessment of trip generation category analysis and regressio n modelling techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ashim, Ahmad Bazil and Majid, Zulkepli and Setan, Halim (2011) Three dimensional asset documentation using terrestrial laser scanner technology. Geoinformation Science Journal, 11 (1). pp. 51-68. ISSN 1511-9491

Ashraf, Ahmed (2010) Social segregation of gated and guarded communities : (a case study in PJS 9, Subang Jaya). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ashrafi, Sina Alizadeh (2012) Performance evaluation of drilling CFRP/METAL stacks using carbide tools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Asnawi, Syalwati (2012) Performance of controlled release-formulated mosquito repellent based on geranium oil-loaded solid lipid particles (SLP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aspar, Zulfakar (2005) Programmable Automation Controller (PAC) as a Specialized Programmable Logic Controller (PLC) application. In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Asri, Noor Shawal (2008) Comparison of catalyst activity between palladium,copper, and iron catalyst in catalytic combustion of methane. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp Ed.). 113 - 121. ISSN 1823-5255

Asri, Noor Shawal (2008) Development of computer simulation on economic analyses and project management for industrial fuel and burner conversion. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 91 - 100. ISSN 1823-5255

Asri, Noor Shawal (2008) Modeling study of the injeciton diameter efecctiveness on methane/air mixing for non-porous of catalytic combustion system. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 133 - 140. ISSN 1823-5255

Asri, Noor Shawal (2008) Modeling study on homogeneous methane-air mixture for monolith catalytic combustion application system. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 29 - 45. ISSN 1823-5255

Asri, Nor Asmadi (2012) Close range photogrammetry method in volume determination using non-metric camera and Australis software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Assadian, Mahtab (2012) The effect of surface treatment and electrophretic deposition on corrosion of biomaterials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Astuti, Budi (2003) Preparation and FTIR spectroscopy of P205-MnO2-Sm203 glasses. In: Regional Conference On Solid State Science and Technology, 2003, Swiss-Garden Resort, Damai Laut, Lumut, Perak.

Atabaki, Mehdi Mazar (2012) Partial transient liquid phase diffusion bonding of zircaloy-4, stainless steel, copper beryllium and aluminium composite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Atan, Sohaila (2009) The cognitive and metacognition reading strategies of B.Ed Tesol Foundation course students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Attarzadeh Niaki, Seyed Mohammad Reza (2011) Cubic interpolated pseudo particle method to predict dynamic behaviour of solid particles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Awang, Ahmad Fauzi (2012) Establishment of a work programme model for contractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Azmee (2004) Concurrency control in collaborative 3D protein structure visualization environment. In: International Conference on Computer Graphic and Multimedia , 2004, n/a.

Awang, Azmee (2004) Molecular surface comparison method based on vector spatial arrangement. In: International Conference on Computer Graphic and Multimedia , 2004, n/a.

Awang, Dzulkifli (2003) Industrial design curriculum in UTM. In: Malaysia Design Conference, 2003, Kuala Lumpur.

Awang, Mariyami (2003) Development of a correlation for estimating gelation in porous using bottle test measurement. In: SPE International Improved Oil Recovery Conference In Asia Pacific, 2003, Kuala Lumpur.

Awang, Mariyami (2003) Estimation of surface tension for two immiscible fluids using lattice gas automata. In: SPE International Improved Oil Recovery Conference In Asia Pacific, 2003, Kuala Lumpur.

Awang, Mariyami (2003) The simulation of polymer gel formation in porous media using lattice gas automata. In: Petroleum Engineering Group Technology Forum, 2003, Seremban, Negeri Sembilan.

Awang, Ramli (2003) Falsafah sains dan teknologi sejarah dan kesedaran semula di dunia Islam moden. In: Seminar Islam and The Challenges of Science and Technology in The 21st Century, 2003, Johor Bahru.

Awang, Ramli (2005) Perkembangan institusi pondok di nusantara-pengaruhnya Di Negeri kedah. In: Monograf Penyelidikan, 2005, Tidak Berkaitan.

Awang Hamid, Dayang Tiawa (2006) Reka bentuk dan keberkesanan persisian multimedia membaca faham berasaskan gambaran visual bagi kanak-kanak prasekolah. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Awee, Rabidin (2000) Hubungan antara gaya kepimpinan pengetua dengan kepuasan kerja guru-guru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ayinde, Folorunso Olufemi (2011) Improved data normalisation and dimensionality reduction algorithms for visualisation of pipeline sensor datasets. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ayob, Ishak (2009) Kajian perbezaan antara pengetahuan dan amalan guru pelatih KPLI pemulihan khas semasa menjalani latihan praktikum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Azahari, Nor Aziawati (2004) Development of a programmable switch mode power supply controlling water pump in solid state laser cooling system using PICI6F870 microcontroller. In: Regional Conference on Solid State Science And Technology , 2004, n/a.

Azaryoon, Arash (2012) Knowledge-based system for non-conventional machining processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azdarpour, Amin (2010) The effects of polymer concentrations on polymer enhanced foam (PEF) stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Azhari, Fahmi (2011) Sistem interaktif capaian dan pemilihan maklumat kadaster secara atas talian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Azila Abd. Aziz, (2006) Purification strategies for recombinant human transferrin expressed using baculovirus expression vector systems. In: Special Topics In Bioprocess Engineering Volume I. Penerbit UTM, Johor , pp. 171-188. ISBN 978-983-52-0600-9

Azimuhaiza, Azimuhaiza (2005) Medical diseases detector. In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Aziz, Amir (2011) Combustion characterization of ammonium perchlorate based solid rocket propellant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aziz, Baharuddin (2009) Takharuj dalam pembahagian pusaka Islam : kajian di daerah Kota Setar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Aziz, Hairul Shah (2010) Modeling of transient power distribution in a fused fiber coupler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aziz, Junaidi (2003) Analytical approach to obtain the harmonics spectra on a five level cascaded inverter with subjected to a new modulation scheme. In: International Conference On Power Electronics and Drive Systems, 2003.

Aziz, Madzlan (2008) Effects of catalyst preparation on multiwalled carbon nanotubes growth. Solid State Science and Technology Letters, 15 (2). 77 - 83. ISSN 0128-8393

Aziz, Madzlan (2008) Fabrication of carbonaceous material using home made plasma enhanced chemical vapour depostion (pecvd) system. Solid State Science and Technology Letters, 15 (1). 87 - 92. ISSN 0128-8393

Aziz, Madzlan (2004) Preparation and characterization of PVDF/ENR-50 polymer blend. In: Regional Conference on Solid State Science And Technology , 2004, n/a.

Aziz @ Abdul Aziz, Saifuldin (2009) Kekangan dalam perwarisan tanah pusaka Felda di bawah akta (kawasan penempatan berkelompok ) 1960, kajian kes di Felda Soeharto, Daerah Hulu Selangor, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Azizan, Anim Zalina (2003) Meninjau kesedaran dan komitmen pengurusan pengetahuan (KM) dengan melihat aspek penggunaan dan kepentingannya di kalangan pentadbir Universiti dan Fakulti di UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Azizan, Muhammad Akmal (2012) Vortex induced vibration on stationary cyclinder using CFD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azizan Kamal A. Nasir, N. Azlinda Kasma (2010) Kepuasan pelajar Fakulti Pendidikan UTM terhadap kualiti perkhidmatan di Pusat Kesihatan UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Azli Ali Khan, Mohd. Noor (2004) Praktis pelaporan segmen berdasarkan International Accounting Standart (IAS). In: Seminar Kebangsaan Sosio-Ekonomi Dan IT, 2004, n/a.

Azman, Mohd. Zaki (2010) Persepsi guru-guru Pendidikan Jasmani dan Kesihatan terhadap mata pelajaran Pendidikan Jasmani dan Kesihatan di sekolah menengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Azman, Qaiyum (2009) Comparative analysis of TVET modalities of 10 Southeast Asian (SEA) countries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Azman Hassan, (2006) Mechanical properties of polystyrene / linear low density polyethylee blend: effect of polystyrene- block-poly(Ethylene-co-Buthylene)-Block-Polystyrene-co-SEBS) as compatibilizer. In: Advanced In Polymer Technology I. Penerbit UTM, Johor , 1 - 37. ISBN 978-983-52-0603-0

Azman Hassan, Zurina Mohamad, (2006) Preparation and mechanical properties of high impact ABS / PC Blends. In: Advanced In Polymer Technology I. Penerbit UTM, Johor , 59 - 69. ISBN 978-983-52-0603-0

Azmi, Afisza Irfan (2009) Contractors's application of extension of time in PAM 1998. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azmi, Muhammad (2012) Framework for end-of-life vehicle recycling system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Siti Jamilah (2011) Learners' perceptions towards explicit and implicit grammar teaching of past tense verb rules. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Azmi , Azimah (2010) Penentuan nilai sewa bagi ruang niaga pasar awam milik pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Azri, Nor Suhaibah (2012) Three-dimensional primitive objects for next generation of geo-database management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

B

B. Rumpod, Justin (2000) Keberkesanan sekolah dari segi akademik dan kaitannya dengan gaya kepimpinan pengetua.Kajian di sekolah-sekolah menengah daerah Tamparuli, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baba, Mohd. Nazir (2010) Penggunaan KBKK dalam pengajaran dan pembelajaran Matematik sekolah menengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baba, Umar Muktar (2008) Synthesis and modification of aluminophosphate molecular sieve using amine as carbon dioxide adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Bachok, Ismi (2009) Penggunaan perisian pendidikan persembahan kerja berasaskan "Multiple Intelligences" oleh guru Kejuruteraan Mekanikal di Sekolah Menengah Teknik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Bachok, Zainurhuda (2011) Kajian terhadap situasi pelajar kurang upaya dalam penyediaan fasiliti di institusi pengajian tinggi (IPT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Bachok @ Daud, Siti Rafidah (2008) Persepsi pelajar terhadap keberkesanan implementasi e-pembelajaran : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Bade, Abdullah (2004) Animation of deformable objects in virtual reality. In: Conference of Telematics System, Service and Applications , 2004, n/a.

Bade, Abdullah (2004) Bounding volume approaches in collision detection : requirement advantages. In: National Conference on Computer Graphics & Multimedia, 2004, n/a.

Bade, Abdullah (2004) Collision response between deformable object in computer games. In: International Conference on Computer Graphic and Multimedia , 2004, n/a.

Bade, Abdullah (2004) A deformation object in virtual reality for medical technique and models. In: International Conference on Artificial Intelligence in Engineer, 2004, n/a.

Badri, Nor Aziah (2010) Kemahiran pengutaraan masalah Matematik dalam kalangan pelajar tingkatan dua. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Badruddin, Husna (2008) Evidence that are needed to claim for direct loss and. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Badui, Mohd. Zain (2009) Kajian perbezaan pencapaian prestasi antara kerja kursus dengan praktikum bagi pengkhususan Matematik di Institut Pendidikan Guru Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baghi, Mahsa Hassani (2011) Relationship between physical conditions of public realm and outdoor activities to create vibrant streets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bahari, Norhazilina (2010) Application of differential evolution to determine the optimal harmonic elimination pulse-width modulation angles in a three phase inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baharim, Azrina (2009) Kajian profil kes-kes kejayaan melalui program keusahawanan di daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baharim, Rohana (2009) Penilaian persekitaran e-pembelajaran di kalangan pelajar pra-siswazah Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Baharim, Rosdi (2010) Mechanical and vibration analysis of throttle body of a small natural gas vehicle engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Baharin, Noor Hamizah (2012) Self assessment green building index for residential estates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharin, Siti Nor Atika (2012) Adsorption of lead (II) from aqueous solution onto calcined volcanic ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Baharom, Mohd. Shukri (2010) Pelaksanaan sistem pembangunan tanah bersepakat (PTB) dalam menyusun semula tanah : Kajian Kes : Projek PTB Kampung Pulau Meranti Daerah Sepang,Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Baharun, Rohaizat (2004) Study of bank selection criteria & preference in Malaysia's banking services. In: National Seminar In Islamic Banking & finance (iBAF), 2004, Putrajaya, Selangor.

Baharun, Rohaizat and Abdul Hamid, Abu Bakar and Shamsuddin, Ahmad Sharifuddin and Md. Salleh, Norzafir and Zaidin, Norzaidahwati and Sulaiman, Zuraidah (2009) The market segmentation in Malaysia by using psychographic dimensions. In: The Essentials of Marketing Principles. Penerbit UTM Press, Skudai, Johor, pp. 37-58. ISBN 978-983-52-0718-1

Baharun, Rohaizat and Ali, Maimunah and Padlee, Falinda (2009) Higher education and the global marketplace from Malaysian experience. In: Contemporary Issues in Marketing. Penerbit UTM Press, Skudai, Johor, pp. 55-78. ISBN 978-983-52-0717-4

Baharun, Rohaizat and Sulaiman, Abdul Rahman and Ungku Ahmad, Ungku Norulakmar (2009) Children as consumers: consumption of carbonated drink at school. In: The Essentials of Marketing Principles. Penerbit UTM Press, Skudai, Johor, pp. 95-108. ISBN 978-983-52-0718-1

Baharun, Sabariah (2003) A unified approach in inverse problems. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

Bajuri@Mok, Norkhairul Hafiz (2003) Voluntary accounting disclosures : a study on disclosures of derivatives financial instruments and foreign activity level. In: The Asian Academy of Management Conference 2003, 2003, Seattle, USA.

Bakhary, Norhisham (2003) Improvement of bridge deck rating prediction by transforming in data for neural network. In: Asia Pacific Structural Engineering and Construction Conference (APSEC), 2003, Johor Bahru, Malaysia.

Bakri, Ahmadon and Misnan, Mohd. Saidin and Kuang, Lee Chia and Ismail, Syuhaida and Mohamad Zin, Rosli (2009) SHASSIC and SPMT: their differences. In: International Conference On Construction Inustry ii 2009, 2009, Padang Indonesia.

Bakri, Aryati (2004) The architecture of an intelligent decision support system yield prediction. In: Joint International Conference on Informatics and the International Conference on Research on Women in ICT, 2004, Kuala Lumpur.

Bakri, Aryati (2003) Sistem bantuan keputusan pembentukkan kurikulum menggunakan teknik gudang data. In: Seminar Kebangsaan Sains Pemutusan, 2003, Langkawi, Kedah.

Bakri, Mohd. Sharil (2004) Faktor individu dan kejayaan pelaksanaan Sistem Maklumat Sumber Manusia (SMSM) : satu tinjauan. In: National Human Resource Management Conference, 2004, n/a.

Bakri, Norhani (2010) Pembudayaan teknologi di kalangan pekerja sektor industri teknologi tinggi di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Bakri, Norhani and Abd. Razak, Noor Zainab and Ab. Rahman, Hamidah and Mad Shah, Ishak and Shaari, Roziana and Zaini, Fadilah (2009) Persepsi pensyarah terhadap persekitaran pengajaran dan pembelajaran mata pelajaran umum universiti di Universiti Teknologi Malaysia, Skudai, Johor Darul Takzim. In: Amalan Latihan dan Pembangunan Sumber Manusia di Malaysia. Penerbit UTM Press, Skudai, Johor, pp. 285-292. ISBN 978-983-52-0722-8

Bakti, Erman Surya (2012) Constructability database knowledge model and guidelines of industrial plant at construction stage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bala Krishnan, Malarvili (2003) ECG baseline removal using adaptivr filter. In: Music', 2003, MMU, Selangor.

Balakrishnan, Malarvili (2010) Comparative analysis of preprocessing techniques for quantification of heart rate viability. In: Proceedings of 2010 International Conference on Computer Applications and Industrial Electronics, 5-7 December 2010, Seri Pacific Hotel, Kuala Lumpur.

Balakrishnan, Sathivellu (2012) Hardware-based genetic algorithm implementation in field programmable gate arrays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Balakrishnan, Sivakkumar (2009) Kualiti pengajaran guru lepasan program PKPG dan SPACE Universiti Teknologi Malaysia dalam mata pelajaran Kemahiran Hidup Bersepadu di sekolah-sekolah menengah negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Balakrishnan, Thayalan (2011) Corrosion problem in reinforced concrete structures exposed to marine environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baldeve, Paunoo (2004) Path finding algorithm in game engine development. In: International Conference On Artificial Intelligence In Engineering, 2004, n/a.

Banihashemi Namini, Seyed Saeed (2012) An integration of industrialised building system with building information modelling to improve construction industry productivity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baradaran Rohani, Mahsa (2012) Developing a framework for deploying web 2.0 in UTM e-learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bari Razib, Hasibul (2012) Evaluation of upgradable transitional shelter desings in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Basar, Khajali (2001) Keberkesanan pemindahan teknologi pertahanan dalam Angkatan Tentera Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Basir, Rosidah (2011) Sistem integrasi pengurusan tempat kerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Basir, Siti Nora (2010) Closed loop system identification based on control input and noisy output data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Basiron, Bushrah (2005) Wanita dan kepimpinan menurut perspektif Islam. In: Seminar Wanita Profesional, 2005, FP UM, Kuala Lumpur.

Basiron, Sakdiah (2008) History, philosphy and trends in engineering -first experience of Universiti Teknologi Malaysia. In: International Conference on Engineering Education ( ICEE), 2008, Budapest Hungary.

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Basri, Nor Iwani (2008) Critical success factors for IBS adoption in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Basta, Kabagambe Mathius (2009) The global positioning system ambiguity problem resolution and validation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Bavafa, Ali Asghar (2012) Evaluation of construction time performance and waste time reduction by utilizing lean paradigm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bedu, Hashim (2008) Tahap dan punca stres di kalangan anggota Jabatan Penerangan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Bedullah, Mat Noji (2000) Perception of industry towards the tool & die and mould graduates of German-Malaysian Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Behboodian, Navid (2012) ARP poisoning detection and protection using client's ARP table monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Behnia, Arash (2012) Finite element analysis of high modal dynamic responses of composite floor due to human motion induction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Besrour, Souhaib (2012) Measuring security practices in requirements engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bhupal Kumar, Seekayapatteda (2012) Properties of gravity die casting of magnesium and aluminium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bidin, Noriah (2008) Detection of thermal deformation on artificial tooth using holographic interferometry single exposure technique. Jurnal Fizik UTM, 3 . 117 - 123. ISSN 0128-8644

Bidin, Noriah (2003) The study of point stress effect using double exposure holograph interferometry techniques. In: IPTA 2003, 2003, Kuala Lumpur.

Bimakra, Mandana and Abdul Rahmana, Russly and Taipa, Farah Saleena and Ganjloo, Ali and Md. Salleh, Liza and Selamat, Jinap and Hamid, Azizah and Zaidul, I. S. M. (2011) Comparison of different extraction methods for the extraction of major bioactive flavonoid compounds from spearmint (Mentha spicata L.) leaves. Food and Bioproducts Processing, 89 (1). 67 - 72. ISSN 0960-3085

Bisni, Norshahfariz (2010) Design and construction of a small tesla coil (2kv). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bockarie, Alfred Swaray (2008) Three dimensional modeling from survey data (case study of FKSG and surrounding). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Bohari, Asmah Alia (2009) Quantity surveyor's liability during pre tender stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bolong, N. and Ismail, A. F. and Salim, M. R. and Rana, D. and Matsuura, T. (2010) Surface characterization by x-ray photoelectron spectroscopy of polyethersulfone hollow fiber membranes modified with surface modifying macromolecules. n/a . pp. 25-33.

Bong, Winnie Chui Nyuk (2011) Implementing knowledge sharing in construction industry firms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Boon, Kok Siong (2010) Classification of universities in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Borghei, Amir Hossein (2012) Executive dashboard reports for public sector clients in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Borhanudin, Noor Hasiken (2008) Termination of contract by contractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Boroojeni, Mohsen Bakhtiari (2011) Energy efficiency in non-residential building in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bozorgi Rad, Seyed Yaser (2012) Enhancing genetic algorithms based solutions for multi source flexible multistage logistics network models. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Buang, Nor Azizah (2004) Temperature programmed reduction and desorption studies on catalyst for CO2/H2 by propylene. In: Regional Conference on Solid State Science And Technology , 2004, n/a.

Bukhairah, Abdul Jalil (2001) Persepsi terhadap persaraan dan kesannya ke atas perancangan persaraan di kalangan kakitangan Lembaga Pertubuhan Peladang Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Bun, Albert Kim Fook (2010) Dynamic voltage restorer for voltage sag mitigation in steel industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Buntat, Yahya (2010) Computer technology application and vocational education : a review of literature and research. European Journal of Social Sciences, 14 (4). 645 - 651.

Bustamam, Azlin (2012) Easing students' learning difficulty in reflection using geometer's sketchpad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

C

C. Venkatesh, V. (2003) High precision grinding of IC chips, infrared optics and optical glass. In: Conference On Precision Engineering-COPEN 2003-04, 2003, Bangalore, India.

Cahyadi, Adha Imam and Yusof, Rubiyah and Yamamoto, Yoshio (2010) Stable and transparent delayed teleoperation systems based on FDE-dissipativity. IEEE Transactions on Robotics September 8, 2010 .

Candra, Muhammad (2010) Reading habits and strategies of English teachers in Public Senior High Schools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Chai, Wai Chun (2012) Facilities management criteria that influence facilities development during construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chai, Welfred Khai Hung (2011) Motivations and barriers to the implementation of green building policy in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai Har, Chia (2003) Determination of Inorganic Cr(III) in surface waters rivers in the industrial areas of Pasir Gudang and Johor Bahru. In: Simposium Kimia Analysis Kebangsaan, 2003, Selangor.

Chan, Diana Yian Lian (2009) The influence of culture on the street space in three cities in Tamil Nadu, India : Chennai, Pondicherry and Madurai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chan, Yin Weng (2000) Improving the operating process procedure to fulfill the ISO 9001 procedures in engineering services center SIRIM Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Chan , Huey Yann (2010) Facility management services in shopping centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chan Hoong, Chen (2004) Degradation study of bimodal and cross-linked bimodal high polyethylene at varying concentration of ontioxidant. In: Scientific Conference Of EMSM, 2004, n/a.

Chang, Shuo (2010) The relationship between self-concept and career maturity in career development a study of management student in University Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chang, Soon Poh (2010) Strategi pembangunan oleh pemaju bagi mengelakkan masalah "unsold property" di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chang, Wei Lam (2000) Performance measurement instrument of highway concessionaires for the Malaysia highway authority. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Che Abas, Atirah Izzah (2010) Self-concept and communication apprehension among teaching English As a Second Language students in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Che Ali, Anuar (2012) Risk management for superior project performance in Petronas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ali, Nurul Huda (2009) Electronic commerce adoption : an emplirical study of small and medium enterprises (SMEs) in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Awang, S. (2005) Enhancement of local area DGPS accuracy: a composite approach. In: International Symposium & Exhibiton on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World, 2005, Pulau Pinang.

Che Azmi, Mohammad Azfar (2011) Effect of melt treatment of LM6 alloy on porosity using quenching and thermal analysis techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Fai, Yeong (2004) Human robot interface on enabled mobile robot using a portable device. In: International Conference on Artificial Intelligence in Engineering Technology, 2004, n/a.

Che Ghani, Anis Ayuni (2009) Roles of curriculum programmes in fostering inter group contacts among multiracial students in higher education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Che Husain, Che Huzzana (2008) Kepentingan status pemilikan di dalam pembangunan perumahan komuniti berpagar kajian kes : Alam Perdana Garden Resort. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Che Hussain, Nurzatul Iffah (2011) Pengaruh gaya pembelajaran dan kreativiti terhadap penyelesaian masalah Algebra di kalangan pelajar tingkatan empat di tiga daerah di Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Che Hussin, Ab. Razak (2010) Assessing trust in e-Commerce website based on ranking of trust attributes. WSEAS Transactions on Business and Economics, 7 (2). 104 - 113.

Che Hussin, Nor Zuhailah (2009) Personaliti dalam pemilihan kerjaya di kalangan pelajar di Pusat Perindustrian dan Pemulihan OKU (PLPP) Bangi, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Ku Abdullah, Che Ku Sufiah (2011) The reliability and effectiveness of department estimate in tender evaluation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Che Man, Rohaida (2007) Optimization of physico-chemical conditions for expression of chitinase from trichoderma virens UKM-1 in escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Che Mat @ Mohd. Shukor, Zamzarina (2004) Development of intelligent hybrid learning system using cluster knowledge based neural networks for economic forecasting : first phase. In: International Conference of Knowledge Management, 2004, UUM, Sintok, Kedah.

Che Mat @ Mohd. Shukor, Zamzarina (2004) An initial state of design and development of intelligent knowledge discovery system for stock exchange database. In: International Conference of Knowledge Management, 2004, UUM, Sintok, Kedah.

Che Nai, Mohamad (2007) Kesan pembangunan bandar baru terhadap nilai tanah : kajian kes Bandar Darulaman Utama , Kuala Ketil, Baling Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Che Omar, Abdullah (2009) Kajian tabiat minda (kolaboratif dan pembelajaran sepanjang hayat) di kalangan pelajar Fakulti Pendidikan Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Che Puan, Othman and Hainin, Mohd. Rosli (2006) Existence of dilemma zones at signalised junctions: improper design or a myth? In: SEPKA 2006- National Seminar on Civil Engineering Research- Engineering and Scientific Research Towards a Better and Sustainable Future Development, 2006, UTM Skudai, Johor.

Che Sidik, Nor Azwadi (2010) An accurate numerical method to predict fluid flow in a shear driven cavity. International Review of Mechanical Engineering (IREME), 4 (6). 719 - 725.

Che Wel, Suhaimi (2002) Kajian keperluan latihan bagi jurujahit kajian kes : puspamara sendirian berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Yaacob, Yuzlina (2009) Tahap kesediaan pelatih dan hubungannya dengan keberkesanan program latihan penulisan efektif : satu kajian di Johor Corporation, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Che Yunus, Mohd. Azizi (2008) Determination of overall mass transfer coefficent of palm kernel extraction using supercritical carbon dioxide. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp Ed.). 64 - 72. ISSN 1823-5255

Che Yunus, Mohd. Azizi (2008) Extraction and identification of compounds from parkia speciosa seeds by supercritical carbon dioxide. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp Ed.). 153 - 163. ISSN 1823-5255

Che Yunus, Mohd. Azizi and N. A., Nik Norulaini and B. Setianto, Wahyu and A. K., Mohd. Omar (2006) Supercritical carbon dioxide extraction of constituents of pithecellobin jiringan seed and their identification using time of flight gas spectrometry. In: Proceedings of the First International Conference on Natural Resources Engineering & Technology 2006, 2006, Putrajaya.

Che Yunus, Mohd. Azizi and Nik Norulaini, N. A. and Wahyu, B. S. and Mohd. Omar, A. K. (2006) Extraction of djenkolic acid from pithecellobium jiringan seeds using supercritical carbon dioxide extraction. In: Proceedings of the 11th APCChE Congress 2006, 2006, Australia.

Che Yunus, Mohd. Azizi and Z., Salman and N. A., Nik Norulaini and A. K., Mohd. Omar (2006) Gas chromatography / time of flight mass spectrometry for identification of compounds from Parkia Speciosa seeds extracted by supercritical carbon dioxide. In: Proceedings of the First International Conference on Natural Resources Engineering & Technology 2006, 2006, Putrajaya.

Che Zin, Nor Azlina (2011) Optimisation of ship berth capacity for a container port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chee Hing, Chan (2004) Modelling of storm runoff from a residential catchment. In: International conference on Managing Rivers in The 21st Century, 2004, n/a.

Chee Hing, Chan (2004) Modelling of watershed cumulative effect based on major using XPSWMM2000. In: Asian Junior scientist Workshop on Sewer Network Process And Drainage, 2004, n/a.

Chee Hing, Chan (2004) Streamflow characteristics from an oil palm catchment. In: International Conference on Water And Wastewater, 2004, Kuala Lumpur.

Chee Tiong, Ong (2005) Advanced cryptographic processor IC chip prototype for next-generation smart cards and security devices. In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Chee Tiong, Ong (2003) Approximate and numerical solution of forced nonlinear evolution equations. In: International Conference On Mathematics, 2003, Selangor.

Chelliah, Kumutha (2012) Random mutagenesis of NS1 protein of influenza a H1N1 and docking of RNA aptamers to wild type and mutant NSI proteins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chelliapan, Shreeshivadasan (2008) Antibiotics in the environment. In: Third Regional Symposiumon Environment And Natural Resources , 2008, Kuala Lumpur.

Chelliapan, Shreeshivadasan (2008) Treatment of pharmaceutical wastewater by advanced oxidation process ( AOP ). In: Asian Water 2008 Conference -An International Conference on Water & Waste water, 2008, Kuala Lumpur.

Chelliapan, Shreeshivadasan and Muhammad Yuzir, Muhamad Ali (2010) Treatment of high-strength wastewater in a sequential anaerobic? aerobic reactor system. In: 5th Annual International Symposium on Environment, 20-23 May 2010, Athens, Greece.

Chelliapan, Shreeshivadasan and Yuzir, Muhammad Ali and Mahat, Siti Baizura (2010) Treatment of high-strength pharmaceutical wastewater in a sequential anaerobic - aerobic reactor system. In: 5th Annual International Symposium on Environment, 20-23 May 2010, Athens, Greece.

Chen, Kah Eng (2001) Towards the development of precise unified geocentric reference frame for Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Chen, Tet Khuan (2008) Conceptual three dimensional topology : spatial analytical operations for geo - database management system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Chen Chen, Lau (2004) Electronic conduction processes in amorphous silicon-carbon thin films prepared by RF magnetron sputtering. In: Regional Conference And Workshop On Solid State Science And Technology, 2004, n/a.

Cheong, Sook Fen (2003) Penilaian tahap keupayaan penyelidikan dan pembangunan : kajian kes di Syarikat Kenwood Electronics,Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chermahini, Siavash Hosseinpour (2010) Decolorisation of cashew leaves extract with activated carbon in tea bag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Cheshmehgaz, Hossein Rajabalipour (2012) Polar-based multiple multi-objective evolutionary algorithms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chew, Boon Cheong (2003) Implementation differentiating and positioning strategy for market offering in Malaysian market : case study in UMW Toyota Motor Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chew, Yuen Er (2009) Pembinaan dan keberkesanan bahan pengajaran penerapan unsur Sejarah terhadap sikap pelajar dan pencapaian Matematik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Chia, Eunice Mei Ling (2009) The enforceability of liquidated and ascertained damages in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chiang, Kok Wei (2012) Easing learning difficulties in circles among fourth formers students using Van Hiele-Oriented learning instructions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Chimphlee, Witcha (2008) Hybrid fuzzy techniques for unsupervised intrusion detection system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Chin Chuan, Butt (2004) A mobile knowledge management system architecture in higher institution. In: Knowledge Management International Conference and exhibition , 2004, Pulau Pinang.

Chin Guan, Lau (2004) Highly effective cubic aluminated mesoporous catalyst in friedel-crafts acylation. In: Annual Fundamental Science seminar, 2004, UTM.

Chizari, Hassan (2012) Delaunay triangulation-based global and local coverage measurement for wireless sensor networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choi, Sang Long (2011) Relationship between human resource professionals' competencies, human resource professionals' roles and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chong, Heap Yih (2010) E-dispute resolution model on contractual variations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Kuan Eng (2010) Technology entrepreneur development at graduate training in Malaysia institute of higher learning. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Chong, Lai Ying (2012) Kemahiran proses Sains dan hubungannya dengan keberkesanan penggunaan makmal serta kemahiran manipulatif pelajar menengah atas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Chong, Nyuk Choon (2000) Persepsi guru terhadap kepimpinan pengetua di empat buah Sekolah Menengah Pantai Barat Selatan, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Chong, Woon Chan (2012) Effect of exhaust gas stream recirculation on emission from a palm oil mill boiler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Chong, Ya Cheng (2005) Penilaian terhadap tahap kesedaran gangguan seksual di kalangan pekerja wanita : kajian kes di Kemtronics (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Chong, Yee Horng (2012) Finite element analysis of corbel to beam connection under static load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choo, Kok Wah (2010) Decision making framework for an earthquake resistant building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choong, Weng Wai (2008) Conceptual model of energy awareness development process. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Chow, Ming Fai (2011) Quantification and modeling of non-point source pollution in residential, commercial and industrial catchments. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Christian Sunday, Chukwuekezie (2011) Nanocrystalline Ni-Co alloy synthesis by high speed electrodeposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Christiana, Eyetan (2009) Applicability of gis database to customary land development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chua, Clara Yian Thin (2010) Kesan pemberhentian skim penempatan semula di Sarawak kajian kes : bahagian selatan bandaraya Kuching, Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chua, Simon Soon Hua (2010) Factors contributing to satisfactory usage of school staff room and the effects of dissatisfaction. Masters thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Chuah, Seong Jin (2010) The perceptions of professionals on the traffic impact assessment (TIA) report. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chuan, Butt Chin (2003) Review on M-learning system architecture. In: International Conference On M-Learning, 2003, Kuala Lumpur.

Chuan, Tan Shuen (2004) A simple block segmentation on disconnected and unbroken digits. In: International Conference on Computer Graphics, Imaging and Visualization, 2004, Pulau Pinang.

Chun Loo, Mee (2003) Design of a computer vision system for rubber stamp insperction. In: 1st Region Malaysia-France Workshop On Image Processing in System and Multimedia Communication (IMAGE), 2003, Kuching, Sarawak.

Chung, Hui Hui (2011) Risk assessment on safety in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chwan Yee, Foo (2003) Maximising water recovery through water pinch technology: the water cascade table. In: Environmnet Conference, 2003, Pulau Pinang.

Chwan Yee, Foo (2003) A review on the state od the art of water minisation technique based on pinch technology. In: Environmnet Conference, 2003, Pulau Pinang.

Crysdian, Cahyo (2003) Access controlling firewall using bell-lapadula security model. In: Quality In Research Seminar, 2003, n/a.

Crysdian, Cahyo (2006) Active firewall mechanism as a comprehensive approach towards minimizing internet threats. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Crysdian, Cahyo (2003) Enforcing multilevel security policies for network firewall. In: International Conference Information Technology In Asia, 2003, Kuching, Sarawak.

Crysdian, Cahyo (2004) Network firewall development with multilevel security policy crysdian. In: International conference on Computer Theory And Application, 2004, n/a.

D

Dahalan, Farrah Aini (2012) Development and characterization of phototrophic aerobic granular sludge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dahalan, Nurol Huda (2012) Highway asset management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dahlan, Dahliyusmanto (2004) Detecting outlier on intrusion detection system using data set system calls. In: Internattional Conference on Information and Computer Science , 2004, n/a.

Dahlan, Nor Azina (2003) Socio-cultural impact of tourism in Malaysia : a case study of Cherating, Pahang. In: Hospitality and Tourism Educators National Conference, 2003.

Dahlan, Nor Azina (2003) Socio-cultural impact of tourism in Malaysian: a case study of Cherating Pahang. In: The 2nd Tourism and Hospitality Educators National Conference and 1st Annual General Meeting, 2003, Intekma Resort & Convention Centre, Shah Alam, Selangor.

Dahlan, Zur'aini (2004) The construction of an e-learning bilingual model for an engineering mathematics subject at Universiti Teknologi Malaysia city campus. In: Conference on Engineering Education, 2004, Kuala Lumpur.

Dahliyusmanto, Dahliyusmanto (2003) Intrusion detection using system calss based on discriminant. In: Advanced Technology Congress, 2003, Serdang, Selangor.

Dai, Qing (2011) Adjustment and deformation analysis using robust approach : Danish and PDF methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Daiman, Mukinin @ Mazlan (2000) Pengurusan panitia Bahasa Inggeris dan kaitanya dengan prestasi akademik sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Daman, Daut (2004) Shadow techniques in computer graphics for real time. In: Conference on Telematics System, Service and Applications, 2004, n/a.

Damayanti, A. and Ujang, Zaini and Salim, M. R. (2011) The influenced of PAC, zeolite, and Moringa oleifera as biofouling reducer (BFR) on hybrid membrane bioreactor of palm oil mill effluent (POME). Bioresource technology, 102 (6). pp. 4341-6. ISSN 1873-2976

Dan'azumi, Salisu (2012) Analytical probabilistic model and particle swarm optimization for urban stormwater detention pond design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daniel, Akinmade Oluwatosin (2011) Comparative analysis of stage and phase signal control of a signalised intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Danil, Nordalela (2011) Assessing e-commerce websites design using WEBQUAL 4.0. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Dargi, Ahmad (2012) Developing a framework to improve the supplier selection process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Darusman, Abu Hassan (2000) Perceptions of lecturers towards industries involvement in Malaysia France Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Darwish, Zeki Ahmed (2011) Comparison of the noise power spectrum properties of medical x-ray imaging systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Dason, Azila (2012) Stres dalam kalangan guru Kemahiran Hidup Bersepadu (KHB) sekolah menengah di Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Daud, Adib Azhari (2004) Ke arah desentralisasi hakmilik pendaftar : kajian kes : hakmilik pendaftar Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Daud, Azmani (1998) Keberkesanan pelaksanaan program perkembangan staf di sekolah kawasan bandar dan luar bandar : satu kajian perbandingan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Daud, Juniza (2010) Masalah pengurusan perumahan awam kos rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Daud, Khadijah (2010) Leadership practices of departmental heads in Malaysian public universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Daud, Zulkiflee (2010) The influence of grievance handling determinants on the selection of grievance handling styles. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Davoudinejad, Ali (2012) Performance evaluation of different edge geometry when turning hardened DF3 tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dayalan, Kavitha (2012) Upper secondary student's awareness about low carbon society from Mathematical perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

De' nan, Fatimah (2008) Lateral torsional buckling behaviour of trapezoid web profile section. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Deirram, Nayeleh (2012) Hydrolysis degradation of polycarbonate by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Demiyati, Junaida (2008) The content based instruction (CBI) on the acquisition of discourse markers in EST classroom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Demudu , Suhashini (2010) The knowledge of real estate agents towards the kinesics behaviour of property buyers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Deraman, Daut (2004) Modelling deformation for cartoon character motion. In: National Conference on Computer Graphic And Multimedia , 2004, n/a.

Deraman, Md. Taufik (2012) Amalan kepimpinan Guru Besar sebuah Sekolah Berprestasi Tinggi (SBT) di Johor Bahru, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Deria Liban, Abdilahi (2012) Inference binary search algorithm for blind timing-based attack in MYSQL injector vulnerability checker tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Deris, Farhana Diana (2009) Developing a framework for virtual learning environment to enhance the use of English. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Deris, Safaai (2010) A novel text modeling approach for structural comparison and alignment of biomolecules. WSEAS Transactions on Computers, 9 (7). 675 - 685.

Din, Jafri (2003) Microstrip log periodic antenna using circuit simulation. In: International Symposium On Antennas, Propagation and EM Theory , 2003, n/a.

Din, Jafri (2003) Studies on chracteristic of rain fade at 23 GHz for terrestrition links in Malaysia. In: Ka and Broadband Communications Conference, 2003, n/a.

Din, Sabariyah and Abd-Hamida, Zahidy and James Bryde, David (2010) ISO 9000 certification and construction project performance: the Malaysian experience. International Journal of Project Management, 29 (8). pp. 1044-1056. ISSN 0263-7863

Din, Siti Nor (2009) The acetone/water mixtures as alternative chemical for pulping of pineapple leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Djojomartono, Prijono Nugroho (2008) Pendekatan neo klasik dalam menghurai halangan penawaran tanah di bandar. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Djurdjani, Djurdjani (2008) Landowner's attitude affecting land supply constraints for redevelopment of indigenous lands. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Dolah, Mohd. Shukri (2010) Masa respons terhadap aduan pelanggan dalam kerja penyenggaraan fasiliti bangunan kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Dolati, Iran (2009) The perception of teachers in the use of visual learning aids in the language classroom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Dominic Chwan Yee, Foo (2004) Assessing the sensitivity of water reuse network to noisy using monte carlo simulation. In: Symposium of Malaysian Chemical Engineer, 2004, Perak.

Dominic Foo, Chwan Yee (2003) Syntesis of mass exchange networks for batch processes : part batch network design. In: Proceedings of International Conference on Chemical and Bioprocess Engineering, 2003, Kota Kinabalu, Sabah.

Dorasol, Noorfariha (2010) Analysis prestasi syarikat korporat harta tanah kes kajian : Johor Corporation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Dzinun, Hazlini (2012) Thermal behaviours of exterior wall of buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dzulkifli, Nurul Asyikin (2010) Pemasaran harta tanah di pihak berkuasa tempatan (PBT) kajian kes : Dewan Bandaraya Kuala Lumpur (DBKL). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

E

E-Alamaria, Abdulhakim.M.Salem. (2011) Development of sago based membrane for the pervaporation of ethanol/water system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ebrahimi, Sepideh (2011) A framework of knowledge management system for enterprise resource planning implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Eeu, Tien Yew (2010) Symbolic quantum gate simulation by maxima programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Eh Phon, Danakorn Nincarean (2011) Perisian multimedia berasaskan animasi bagi pembelajaran subtopik isihan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Eileen Su, Lee Ming (2003) Vision system design using colour images for robot localization. In: Proceedings of the International Conference on Robotics, Vision Information and Signal Processing, 2003, Pulau Pinang.

Eileen Yi Lee, Lew (2004) Design of a wood recognition system based on Grey Level Co-Matrix (GLCM) feature extraction technique And BP-based neural. In: International Conference On Artificial Intelligence and Technology, 2004, n/a.

Eisazadeh, Amin (2010) Physicochemical behaviour of lime and phosphoric acid stabilized clayey soils. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Eko, Supriyanto (2010) Development of 3D image reconstruction based on untracked 2D fetal phantom ultrasound images using VTK. Wseas Transactions on Signal Processing, 6 (4). 145 - 154.

El Sayed Nasef, Mohames Mahmoud (2010) Acid-synergized grafting of sodium styrene sulfonate onto electron beam irradiated-poly(vinylidene fluoride) films for preparation of fuel cell membrane. Journal of Applied Polymer Science, 118 (5). 2801 - 2809.

El-Enshasy, Hesham (2010) Bioprocess based and biofactory based platforms: the powerful tools for technology incubation and industrialization processes in research organization. In: Egypt The International Workshop On Industrial Biotechnology, July 3-4, 2010, Alexandria, Egypt.

El-Sayed Nasef, Mohamed Mahmoud (2003) Effect of crosslinking on the physio-chemical properties of grafted PEM fuel cell membranes. In: Proceedings of International Symposium On Renewable Energy, 2003, Kuala Lumpur.

El-Sayed Nasef, Mohamed Mahmoud (2003) New pore-filled polymer electroltye membranes by electrons induced graftig. In: Proceedings of International Sympossium on Renewable Energy, 2003, Kuala Lumpur.

El-Sayed Nasef, Mohamed Mahmoud (2003) Radiation grafted proton exchange membrane for PEM fuel cells: current status and future development In Malaysia. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Elageb Adaam, Alaadein Abdusalam (2012) Feasibility study on the implementation of medium rise industrialized building system (IBS) in Aleskan Alshaabi project in Khartoum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elia, Zulkifli (2010) Performance evaluation of lightning protection design software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elmgharan, Rania M. A. (2009) A case study : an error analysis of Arabic-speaking students' L2 writing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Elrajoubi, Akrem Mohamed (2010) Simulation of a hybrid photovoltaic/wind energy system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Embong, Abd Halim (2009) Prestasi persekitaran fizikal bilik darjah sekolah rendah dibawah piawaian JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Emran, Noor Afizah (2010) Spatial accuracy assessment of the land cover map produced from spot, quickbird and radarsat with reference to cadastral parcels for the development of GIS database system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Endud, Salasiah (2004) Comparative study of iron porphyrin supported on mesoporous and poly (methacrylic acid). In: Annual Fundamental Science seminar, 2004, UTM, Skudai.

Endud, Salasiah (2004) Iron porphyrins supported on mesoporus molecular sieve Al-MCM-4 poly (methacylic acid). In: Regional Conference And Workshop On Solid State Science And Technology, 2004, n/a.

Eng, Boon Cheng (2012) Joint orientation measurement using close range photogrammetry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Entika, Christie Lanjing (2011) Structural response spectra for different soil condition under earthquake loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Erfan, Farhang (2011) A practical approach towards sustainable renovation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esa, Abd. Rahim (2009) Faktor-faktor yang mempengaruhi pelajar di dalam kegiatan kokurikulum di Maahad Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Esa, Aini Sakinah (2011) Consolidation of layered soil using vertical drain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esa, Fahmirudin (2009) The transmission curve of a fabry perot system based on plane and spherical mirror separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Esa, Mazlina (2003) Inset fed antenna for wireless broadband network at 2.45 GHz. In: Malaysian Science and Technology Congress, 2003, Johor Bahru.

Esa, Mazlina (2003) Low profile printed antenna for dual operation. In: National Conference on Telecommunication Technology 2003, 2003, Selangor, Malaysia.

Eslami Afrooz, Aida (2009) Assessing wayfinding of users in unfamiliar large scale urban places : case study Malacca heritage zone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Esmaeili, Moosa (2011) Return mapping schemes in elasto-plastic finite element simulations for different type of hardening and ductile damage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Esnawi, Muzarpar (2009) Kesan latihan fizikal terhadap kecergasan fizikal pelajar Program Ijazah Sarjana Muda Pendidikan di Institut Perguruan Temenggong Ibrahim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Eugene, Okyere-Kwakye (2010) The influence of individual factors on knowledge sharing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Evans, Ordiah Vans (2012) Evaluation of factors affecting the deformation behaviour of braced excavation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

F

F., Denan and M. H., Osman and S. , Saad (2010) The study of lateral torsional buckling behaviour of beam with trapezoid web profile section by experimental and finite element analysis. International Journal of Research and Reviews in applied Sciences (IJRRAS) . ISSN 2076-734X

Fadhlin, Abdullah and Haron, Ismail (2006) Profile of the quantity surveying practices in Malaysia. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Fadzil Ahmad, Nor Farhana (2010) Kegagalan pelaksanaan caj pembangunan di Majlis Bandaraya dan Majlis Perbandaran di Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Fadzilah Adibah Abdul Majid, (2006) Monoclonal IGG production and its purification challenges. In: Special Topics In Bioprocess Engineering Volume I. Penerbit UTM, Johor , pp. 137-165. ISBN 978-983-52-0600-9

Faheem, Muhammad (2012) Enhancement of energy efficient cluster based data gathering protocol for wireless sensor networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fahmie Ramlee, Shah Iskandar (2009) Hubungan antara aktiviti pembelajaran informal dengan pekerja berpengetahuan di Universiti Malaysia Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Faiza, Bukenya (2012) Detecting floods using an object based change detection approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fakhar, Kamran (2010) A note on similarity solutions of navier-stokes equations. Communications in Theoretical Physics, 53 (3). 575 - 578.

Fakharazi, Hayder (2010) Flexural behavior of wire-reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Farahani, Shadi Khoshdoni (2009) Recognition of landslide hazard zonation in fasham area of tehran frovince. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Farahany, Saeed (2012) Evaluation of the effect of additives and their interactions on silicon morphology of aluminium-silicon-copper-magnesium cast alloy by thermal analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fard, Homa Edalati (2009) A social networking website based on peer learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Farid, Ali Akhavan (2012) High speed drilling of A1-Si (A383) alloy using carbide tools. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farouk, Mohamad Alhafiz (2010) Pengaruh faktor persekitaran dan kejiranan dalam keputusan pembeli rumah : (kawasan kajian : Taman Mutiara Rini, Taman Impian Emas dan Taman Sri Pulai Perdana). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Fateh, Amir (2011) Behaviour of external column wide beam joint with different bar arrangement and shear link. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fathaddin, Muhammad Taufiq (2006) The application of lattice gas automata for simulating polymer injection porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia and Zakiyudin, Mohd. Zulakhmar (2010) Mobile information system for construction programme management. In: Second International Conference on Construction in Developing Countries, ICCIDC-II, 3-5 August 2010, Cairo, Egypt.

Fauzi, Mohd. Iqram (2012) Growth of U937 cell in static and suspension culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Fauzi Ahmad, Md. Kamal (2012) Penyediaan kemudahan di stesen-stesen LRT bawah tanah satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Fazeli, Hamid Reza (2009) Integration of GIS and fuzzy logic for land fill site selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Feiz Abadi, Hediyeh Karimi (2010) Modelling of rough surface sensing layer for saw gas sensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Feri, A. (2010) A new methodology for end-of-life option determination and disassemblability analysis. In: Sustainability Science and Engineering. n/a, n/a, n/a.

Firoozabadi, Samira Fotoohi (2012) Knowledge audit for Phd information system at Faculty of Computer Science and Information system of UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Firouzabadi, Farzin (2012) Dynamic response of the pressurized laminated composite cylindrical shell subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fisal, Norsheila (2010) Ant colony inspired self-optimized routing protocol based on cross layer architecture for wireless sensor networks. WSEAS Transactions on Communications, 9 (10). 669 - 678.

Foad @ Fuad, Mohd. Faizal (2004) Kajian ke atas operasi pra-perbadanan pengurusan (Pre-MC) dalam projek perumahan penswastaan kerajaan Johor Darul Ta'zim : kes kajian : Pangsapuri Bukit Saujana, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Foo, Kian Seng (2011) Potential retrofitting of UTM existing buildings to green building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foo, Wei Yee (2009) Determination of critical factor for the scarf patch repairability of sheet molding compound water tank panel using design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Forkan, Fadni (2004) A pattern learning behaviour of BPN and kohonen network for classification problem. In: International Conference on Computer Graphic and Multimedia , 2004, n/a.

Foroozesh, Behnaz (2012) Security features identification for CISCO routers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foroutani, Saman (2011) Study on social network tools for home business. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Fu, Yek Pieng (2009) Assessment of buyer's preference of high-cost residential properties using conjoint analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Fun, Yip Onn (2009) The impact of public amenities on housing selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

G

G. Khalifa, Alsalihin (2009) Lost foam casting of aluminium - silicon (LM6) cast alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G. Linggau, Mohd. Jannes (2000) Sikap guru terhadap pengurusan kokurikulum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Gan, Bee Kean (2012) Pelaksanaan pembangunan profesional dalam meningkatkan keberkesanan sekolah di sekolah-sekolah zon bandar daerah Segamat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Gan, Kok Leong (2003) Synthesis of C-methyl flavones. In: International Seminar On Natural Product , 2003, UM, Kuala Lumpur.

Gan, Siew Lee (2012) Network topology of stocks market. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Gan, Yong Huei (2011) Capturing the sustainability issues in concurrent engineering design environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ganapathy, Kala (2009) Kajian terhadap faktor-faktor mempengaruhi penggunaan internet dalam kalangan pelajar tingkatan 6 bagi tujuan pembelajaran di daerah Kluang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Gao, Yunxia (2010) The impact of web-based Leitner box enhanced with social network on English vocabulary learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Garkoroudi, Abolghasem Zalfi (2010) Influence of road humps on speed-density relationship. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gebril, Khalil. K. (2010) Bandwidth enhancement and miniaturization of dielectric resonator antenna for 5.8 GHz WLAN applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gelungan, Cassindra (2010) Comparison between maximum likelihood, artificial neural network and decision trees technique for land cover mapping using remotely sensed data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Gerami, Parisa (2012) Least significant bit image steganography using particle swarm optimization and optical pixel adjustment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghadim, Hamed Benisi (2012) Simulation of future climate variations using global circulation model and downscaling model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghadiri, Armin (2011) Ultimate strength of post-tension hollow IBS slabs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghafghazi, Hamidreza (2011) Secure data aggregation protocol for wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ghafourian, Mitra (2012) A correlation model on flexible building design with user satisfaction in residential unit plan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ghafourian SharifHeravi, Mona (2009) Investigating the relationships between transformational and transactiona l leadership styles and turnover intention in Tehran IT SME's. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Gharib Khidhir, Halmat (2012) Indicative tests for cracked asphalt pavement sealant performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghasemzadehfahani, Siamak (2012) Disinfection of particle-associated viruses by ultraviolet. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazali, Hanipah (2012) Work improvement at an electronic company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazali, Norizan (2003) Hubungan komunikasi ke bawah pentadbiran guru dengan kepuasan kerja guru-guru. Masters thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Ghazali, Nur Syazwani (2012) Routing optimization using Chinese Postman Problem for waste collection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazanfari, Seyed Alireza (2012) Simulation of hydrodynamic coefficient of AUV during maneuvering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghodsiyeh, Danial (2012) Optimization of machining parameters while wedming titanium alloy (T16AL4V). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ghorashi, Seyed Hamid (2012) Frequent pattern algorithms for product feature extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gofar, Nurly (2004) Prediction of the collapse potential of fills. In: SEPKA, 2004, Skudai.

Goh, Kian Mau (2007) Protein engineering and reaction manipulations of recombinant cyclodextrin glucanotransferase G1 for improvement of product specificity. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Goh, Pei Sean (2012) Purification and functionalization of multiwalled carbon nanotube in mixed matrix membrane for gas separation application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Goh, Wan Yong (2011) Energy management practices for international hotels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Goudarzi, Masoud (2011) Shan-Chen model for two phase flow using latticeboltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Govindan, Pariteppan (2001) Pemindahan teknologi : satu kajian kes di Jalco Electronics (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Gray, Chrispin Alfred (2010) Usability measurement index for higher education institution websites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Gurusamy, Premaraj (2009) Language games in an ESL classroom : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

H

H., Mohamad and K., Soga (2010) Thermal strain sensing of optical cables using brillouin optical time domain reflectometry. Smart Materials and Structures .

H. S., Kang (2004) Development of a virtual driving simulator for transportation research. In: International Conference On Product Design And Development , 2004, Kota Kinabalu.

Habeeba, Fathimath (2010) Factors associate with knowledge sharing among nurses in Maldives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Habibi, Zahra (2010) The impact of movie discussion on language learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Habibuddin, Mohd. Hafiz (2003) ATC determination via multi-layer feed forward neural networks. In: Seminar Artificial Intelligence Applications In Industry, 2003, Kuala Lumpur.

Habidin, Nurul Fadly (2012) Structural analysis and tool for lean six sigma, strategic control systems and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Technology.

Hadan, Azlena (2009) Pembangunan dan penilaian perisian multimedia interaktif berasaskan model konstrukfit bagi tajuk tembikar dalam mata pelajaran Pendidikan Seni Visual tingkatan lima. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Haghighati, Razieh (2012) Modeling flow of crowd during tawaf at Masjid Al-Haram. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haiyon, Siti Patonah (2010) Penguasaan kemahiran proses sains guru-guru sains sekolah rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hakami, Mohammed Ali (2009) Simulation of solar panels effect on microclimate in arid areas using remote sensing technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Halil, Mohd. Najib (2012) Kaitan etika guru dan perspektif sosial peperiksaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Halim, Noor Azlina (2003) Development of manganese based catalyst for low temperature wat shift reaction. In: National Symposium On Science And Technology, 2003, UM, Kuala Lumpur.

Halim, Noor Azlina (2003) Development of new catalyst for low temperature water gas shift reaction. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Halim, Nur Amalina (2010) Fenomena banjir dan kesannya ke atas nilai sewa harta tanah kediaman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Halim, Shafini (2011) Red light running at fixed-time and vehicle actuated traffic signal control system in urban and sub-urban area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ham, Mei Ling (2002) Kajian elemen utama dalam pemasaran perhubungan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hamdan, Anis Nafiza (2010) Pemetaan kawasan hijau dan suhu permukaan daratan menggunakan teknik remote sensing dan GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamdan, Salehhuddin (2010) Cytoprotective activities of Polygonum minus aqueous leaf extract on ethanol-induced gastric ulcer in rats. Journal of Medicinal Plants Research, 4 (24). pp. 2658-2665. ISSN 1996-0875

Hamid, Hisham (2000) Safety and health awareness among the students studying electrical equipment and installation technology at Malaysia France Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hamid, Mohd. Naim (2012) Requirement of value management in construction sector at Malaysian Airports Holdings Berhad (MAHB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamid, Yasin (2012) Mechanical, morphological and water absorption properties of waste Eurycoma Longifolia fiber/montmorillonite reinforced poly (vinyl chloride) hybrid composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamidinezhad, Habib (2011) Structural characterization of silicon nanowires grown by a 150 MHz very high frequency plasma enhanced chemical vapor deposition. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamzah, Amran (2003) Culture heritage management and tourism: self-evaluation and mainstreaming. In: UNESCO Nordic World Heritage Foundation Workshop on Culture Heritage Management and Tourism, 2003, n/a.

Hamzah, Amran (2003) Culture heritage management in Melaka Historic City: the thorny path towards world heritage listing. In: 2nd International Conference On Science and Technology in Archeology and Conversation, 2003, Jordan.

Hamzah, Amran (2004) The evolution of the homestay programme in malaysia: performance sustainability and challenges. In: ASEAN Howmstay, 2004, n/a.

Hamzah, Amran (2003) The life an academician as a tourist consultant. In: Hospitality and Tourism Educators National Conference, 2003.

Hamzah, Amran (2003) The life of an academic as a tourism consultant. In: TEAM Conference 2003, 2003, Shah Alam, Malaysia.

Hamzah, Amran (2004) Policy and planning of the tourism industry in Malaysia: the road ahead. In: Seminar KALAM-ATMA Krisis Senibina dan Komuniti di Malaysia, 2004, Putrajaya.

Hamzah, Amran (2004) Policy and plannning of the tourism industry in Malaysia: the road ahead. In: 3rd National Tourism Educators Conference, 2004, n/a.

Hamzah, Amran (2005) Tour guiding in Malaysia: a profesional at the crossroads. In: National Tour Guides Conference: Ethics-Our Way Of Life, 2005, Shah Alam.

Hamzah, Amran (2003) Urban torism in Melaka Historic City: from theory to practice. In: 3rd International Twin City Convention, 2003, Equatorial Hotel, Melaka.

Hamzah, Amran (2003) Urban tourism in Melaka Historic city : from theory to practice. In: Proceeding of the International Seminar and Workshop on Urban Development Management for Friendly City Medan, Indonesia, 2003, Medan, Indonesia.

Hamzah, Arulhaizal Adam (2011) Reliability assessment for liquefied natural gas ship's distributed control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Esah (2010) Corrosion performance of dual-phase steel embedded in concrete. Arabian Journal For Science and Engineering, 35 (2B). 81 - 90.

Hamzah, Esah (2010) Effect of cathodic arc PVD parameters on roughness of TiN coating on steel substrate. Current Applied Physics, 10 (2). 471 - 474.

Hamzah, Esah (2003) Effect of cooling rate on the microstructure and hardness of titanium aluminide. In: International Conference On Recent Advances In Materials, Minerals Environment, 2003, Penang, Malaysia.

Hamzah, Esah (2004) High and low temperature corrosion behaviour of gamma titanium. In: Annual General Meeting Of The Electron Microscopy Society , 2004, n/a.

Hamzah, Fazlena (2012) Simultaneous saccharification and fermentation of microwave - alkali pre-treated oil palm empty fruit bunch fiber for lactic acid production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamzah, Mascilla (2008) Masalah salah laku agresif di kalangan pelajar sekolah rendah dan hubungannya dengan gaya keibubapaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hamzah, Nor Ayunny (2010) Kualiti perkhidmatan fasiliti di Hospital kerajaan - Hospital Sultanah Aminah, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamzah, Ramlan (2011) Leveraging on lesson learnt in Jabatan Kerja Raya project management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, S. Hasila (2009) Pemencilan dan pencirian bakteria dari telaga minyak tempatan untuk penghasilan asid dan pelarut organik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamzah, Shazana (2009) Amalan perkongsian pengetahuan dalam kalangan guru di lima buah sekolah rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Han Chen, Cheah (2005) Build & design honeypots for MMC-Gamuda stormwater management & road tunnel flood detection system's industry network for network intrusion detection and protection. In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Hanaffi, Siti Fairuz (2011) The provision of school bus loading zone at school area : a case study of Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hanafi, Dirman (2006) Identification of a quarter car passive suspension system using weighted least squares neural networks for a hammerstein model. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Hanafi, Dirman (2004) System identification of nonlinear model of a quarter car suspension sysem using recurrent weighted least square network (RWLSNN). In: International Conference on Artificial Intelligence in Engineer, 2004, n/a.

Hanafi, Mohd. Hanizun (2008) Teknik SIM - BOOST untuk mengukur produktiviti buruh di tapak bina bagi sistem binaan berindustri. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Hanafi, Siti Aisyah (2012) Parallel computation of finite element methods for heat conduction in duct problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hares Wady, Shakhawan (2012) Enhancement of mobile IPV6 for handover latency using robust regression model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Habibah @ Norehan (2012) Self-regulated learning strategies, concept understanding and performance in statics. PhD thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Haron, Habibollah (2008) Deriving hidden junction in solid model reconstruction using neural network. International Journal ICGST-AIML, 8 (2). 1 - 9. ISSN 1687-4846

Haron, Habibollah (2004) The development of robot simulation software : programming trend challenges. In: National Conference on Computer Graphics & Multimedia, 2004, n/a.

Haron, Habibollah (2004) A new framework in extracting feature of irregular line drawing. In: International Conference Computer Graphic , Imaging And Visualization, 2004, Pulau Pinang.

Haron, Hairunizad (2012) Pelaksanaan Sistem Pengurusan Sekolah Kualiti (SPSK) di Sekolah Rendah daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Haron, Mohamad Zhurad (2008) The role of technical and vocational education and training (TVET) in human capital development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Haron, Norreen (2004) Framework for dynamic curriculum sequencing in adaptive learning system using fuzzy logic technique. In: International Conference On Informatics , 2004, n/a.

Haron, Nur Fatihah (2012) Solving job shop scheduling problem by using tabu search method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Haron, Rahim (2008) Keserasian personaliti-persekitaran dan hubungannya dengan prestasi kerja dalam kalangan guru kaunseling sekolah menengah harian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Haroon , Siti Nor Bakyah (2010) Persepsi ke atas "servicescape" stadium dalam mempengaruhi kunjungan penonton. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Harsani, Nadia Hendrawati (2010) Learning environment and its effect on training effectiveness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Harun, Hamran (2011) Wind assisted propulsion system for fuel saving. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Harun, Noor Hafiza (2008) Kinetic study of chlorobenzene degradation by isolated microbes from wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Harun, Noorlisa (2004) Improved statistical process control, ISPC chart, via component analysis, pca for fault detection and diagnosis FDD. In: National Technical Postgraduate Symposium, 2004, n/a.

Harun, Rozman (2003) Analisis keperluan pendekatan kaunseling terhadap masalah pencen melaui satu pendekatan: kajian kes di Jabatan Islam Negeri Johor. In: Seminar Kebangsaan Kaunseling Perspektif Islam , 2003, Langkawi, Kedah.

Haryati Amzah, Nurrul Hudha (2012) The challenges in implementing incentive based contract in Jabatan Kerja Raya project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Azman (2012) Instrumen penilaian pembimbing dalam pelaksanaan pembelajaran berasaskan kerja pelajar di industri. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hasan, Nor Zurairah (2012) Development of PCR assay for detection of Candida orthopsilosis, Candida parapsilosis and Aureobasidium pullulans based on the small subunit of ribosomal RNA gene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Bioengineering.

Hasan, S. and Shamsuddin, S. M. (2011) Multistrategy self-organizing map learning for classification problems. Computational Intelligence and Neuroscience, 2011 . 11 pg..

Hasan Basari, Salawati (2011) Kesesuaian kemahiran penyelesaian masalah dan kemahiran berfikir dalam kurikulum Matematik IKM untuk memenuhi sektor perindustrian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hasan Saleh, Aayed Qasem (2010) International and local students' satisfaction of healthcare services. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hashemi, Mohammad (2012) Multi touch graphical password based on user affinity of choice for multi touch screen devices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hashemifard, Seyed Abdollatif (2011) Development and modelling of mixed matrix membranes incorporating large pore size clay for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Hashemiyan, Zahra (2010) Develop single frequency in bioelectric impedance analysis device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Abd Jalil (2010) Tahap kepuasan pekerja terhadap prestasi persekitaran fizikal dalaman pejabat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hashim, Abdul Manaf (2008) Carbonization layer obtained by acetylene reaction with silicon (100) and (111) surface using low pressure chemical vapor deposition. Journal of Applied Sciences, 8 (19). 3473 - 3478. ISSN 1812-5654

Hashim, Azmi (2010) A comparative study on grid-connected wind turbine using fuzzy logic and conventional controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Hadzeri (2011) Implementing customer service improvement plan in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Haslenda and Douglas, Peter and Elkamel, Ali and Croiset, Eric (2006) An optimal fleet-wide CO2 emission strategy for Ontario. In: Combustion Canada, 2006, Vancouver, Canada.

Hashim, Ismail (2010) Pengurusan organisasi dan perkongsian pengetahuan di Jabatan Kastam Diraja Malaysia Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hashim, Mazlan (2010) Developing adaptive algorithm for automatic detection of geological linear features using RADARSAT-1 SAR data. international Journal of the Physical Sciences, 5 (14). 2223 - 2229.

Hashim, Mazlan (2010) Different polarised topographic synthetic aperture radar (TOPSAR) bands for shoreline change mapping. international Journal of the Physical Sciences, 5 (12). 1883 - 1889.

Hashim, Mazlan and Jaw, Siow Wei (2010) An accuracy of subsurface utility mapping by ground penetrating radar imaging. In: Map Asia 2010 & International Symposium and Exhibition Geoinformation (ISG), 26-28 July 2010, Pusat Persidangan Kuala Lumpur (KLCC).

Hashim, Mazlan and Mohd. Johan Chuah, Norsheila and Marghany, Maged (2010) Vegetation water content mapping using EO-1 hyperion data using derived normalize difference water index for tropical fores. In: MRSS 6th International Remote Sending & Gis Conference and Exhibition (MRSS 2010), 28-29 April 2010, PWTC, Kuala Lumpur.

Hashim, Mazlan and Pour, Amin Beiranvnd and Marghany, Maged (2010) Characterization of ASTER data for mineral exploration. In: MRRS 6th International Remote Sensing & Gis Conference and Exhibition (MRSS 2010), 28-29 April 2010, PWTC, Kuala Lumpur.

Hashim, Mazlan and Pour, Amin Beranvnd (2010) ASTER spectral ratioing for lithological and mineral mapping. In: Map Asia 2010 & the International Symposium and Exhibition Geoinformation (ISG 2010), 26-28 July 2010, Pusat Persidangan Kuala Lumpur (KLCC).

Hashim, Mazlan and Siow, Wei Jaw and Marghany, Maged (2010) Subsurface features mapping and identification using ground penetrating radar : effects of scanning in data acquisition. In: MRRS 6th International Remote Sensing & Gis Conference and Exhibition (MRSS 2010), 28-29 April 2010, PWTC, Kuala Lumpur.

Hashim, Mohamad Ghazali and Chew, Chin Yee (2006) Permodelan hakmilik strata dengan menggunakan OOGIS. In: Inovasi Dalam Sistem Maklumat Geografi (GIS) 1. FKSG, UTM, Johor , 95 - 123. ISBN 978-983-52-0583-5

Hashim, Mohd. Hanifah (2010) Development of energy harvesting device using piezoelectric material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Mohd. Helmy (2004) Preparation and physical properties of P205-KNO3-K2OGLASS. In: Annual Fundamental Science seminar, 2004, UTM.

Hashim, Noor Baharim (2004) Baseline study of water quality in Langat River estuary. In: Seminar Penyelidikan Kejuruteraan Awam , 2004, skudai.

Hashim, Noor Baharim (2004) Baseline study of water quality in Skudai River estuary. In: Water Management For Sustainable Environment , 2004, Shah Alam.

Hashim, Noor Baharim (2004) Environmental impact assessment using a three-dimensional and transport model. In: Seminar Penyelidikan Kejuruteraan Awam , 2004, skudai.

Hashim, Nor Baizura (2011) Penilaian model rupabumi digital yang dihasilkan melalui teknik fotogrametri dan sistem penentududukan sejagat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Hashim, Nor Intan Hasalimah (2009) Sokongan organisasi di dalam pembangunan kerjaya dan hubungannya dengan kepuasan kerjaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hashim, Nurul A'zam (2004) Glkabus : pemodelan kabus bagi persekitaran 3D luaran. In: National Conference on Computer Graphics & Multimedia, 2004, n/a.

Hashim, Shahrin (2004) Gaya pemudah cara di sekolah : sejauh manakah pengetua-pengetua mengamalkan. In: Seminar Nasional Pengurusan dan Kepimpinan Pendidikan, 2004, n/a.

Hashim, Suhaizal (2008) Tahap literasi komputer di kalangan pelajar tingkatan 4 di sekolah luar bandar : satu tinjauan di tiga buah sekolah di daerah Johor Bahru, Johor Darul Takzim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hassan, Anizah (2010) Determination of optimum transfer capability in deregulated power system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, Azman (2003) Impact properties and electron microscope analysis of impact-mono PVC-U. In: Scientific Conference of Electron Micaroscopy Society of Malaysia, 2003, Langkawi, Kedah.

Hassan, Azman (2008) Impact strength of pvc-u-effect of calcium carbonate particles size. Journal of Chemical and Natural Resources Engineering - Advances in Product Development, 2 (Sp Ed.). 35 - 40. ISSN 1823-5255

Hassan, Azman (2003) Polymers in engineering curriculum of Malaysian Universities- an overview. In: Conference On Engineering Education, 2003, Madrid, Spain.

Hassan, Azman (2004) Preliminary studies on the effect of polyethylene octene alastro polypylene nanocomposite. In: Scientific Meeting, 2004, n/a.

Hassan, Azman (2010) A review on oil palm empty fruit bunch fiber-reinforced polymer composite materials. Polymer Composites, 31 (12). 2079 - 2101.

Hassan, Azman and Ismail, Atikah and Mohamad, Zurina (2010) Properties of kenaf filled polypropylene composites containing ammonium polyphosphate as flame retardant. In: 14th European Conference on Composite Materials (ECCM 14), 7-10 June 2010, Budapest, Hungary .

Hassan, Azman and Wahit, Mat Uzir and Balakrishnan, Harintharavimal (2010) Mechanical, thermal, and morphological properties of polylactic acid/linear low density polyethylene blends. Journal Oof Elastomers and Plastics, 42 (3). 223 - 239. ISSN 0095-2443

Hassan, Azman and Wahit, Mat Uzir and Balakrishnan, Harintharavimal and Yussufa, A. A. and Abdul Razak, Shamsul Bahri (2010) Novel toughened polylactic acid nanocomposite: Mechanical, thermal and morphological properties. Materials and Design, 31 (7). 3289 - 3298. ISSN 0261-3069

Hassan, Azmi (2003) Low-cost space-based environmental monitoring for ASEAN. In: National Symposium On Science and Technology, 2003, Kuala Lumpur.

Hassan, Hashim (2008) Chitosan based membranes for pervaporation separation of isopropanol - water mixtures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Hassan, Nursia (2010) Magnetic separable photocatalyst beads for chromium (VI) reduction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan, Nurul Nadia (2009) Kajian pola kepelbagaian kecerdasan, jenis personaliti dan jenis pemikiran kritis di kalangan pelajar cemerlang di sebuah institusi di Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hassan, Nurul Sahida (2012) Synthesis and catalytic activity of polyvinylpyridine supported palladium nanoparticles in sonogashira coupling reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hassan, Nurul Wahidah (2009) Kerja sepasukan dan tahap kepuasan kerja guru di tiga buah sekolah cemerlang di daerah Klang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hassan, Rosli (2007) Computerisation of royal Malaysia police land records using land information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Hassan, Zainudin (2012) Perubahan sosial dan pembangunan modal insan berkualiti dalam kalangan mahasiswa Institusi Pengajian Tinggi Awam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan , Noor Hafizah (2010) Hubungan antara kitaran hidup dan struktur perumahan kes kajian : (kakitangan awam Persekutuan Johor Bahru). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hassan @ Md. Sani, Muhammad Hafidzuddin (2010) The effect of plastics compositions and heating rates on the microwave-induced pyrolysis of mixed plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan Abdi, Abdirashid (2012) Client server application for server farm performance monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan Hamid, Mussab Mustafa (2010) A hybrid heuristic-statistical peer-to-peer traffic classifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan Mohamed Kassem, Hassan Ibrahim (2011) Eddy dissipation modeling of turbulent non-premixed combustion with radiation effect using openfoam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan Shuaibu, Abdulrahman (2012) Determining the impact of volume to capacity ratio on travel time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassanabadi, Mahmoud Shakouri (2012) Design optimization for energy consumption in residential buildings through building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassin, Suriani (2011) Laboratory rutting performance of polymer modified asphalt mix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hatta @ Antah, Fazilah (2011) Perlaksanaan pengurusan berkesan projek Sistem Binaan Berindustri (IBS) di Jabatan Kerja Raya (JKR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haur Tay, Yong (2003) Online chinese handwritten character recognition : a brief revision. In: First Region Malaysia-France Workshop on Image Processing in Vi System and multimedia Communication (IMAGE), 2003, Kuching, Sarawak.

He, Bo (2010) What factors affect university research commercialization in China? : a case study on Northeastern University. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Helou, Adam Mahamat (2011) Students perception on social networking sites influence on academic performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hendriyawan, Hendriyawan (2007) Seismic macrozonation of peninsular Malaysia and microzonation of Kuala Lumpur City Center and Putrajaya. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Heok , Tan Kim (2004) Appearance-preserving on massive datasets simplication in 3D real-time game engine development. In: National Conference on Computer Graphics and Multimedia, 2004, Selangor.

Heriansyah, Rudi (2011) Defect detection and characterization on thermal image by means of passive thermography. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Heriansyah, Rudi (2003) Neural network data Design : A PCB Defects Classification Applications. In: Seminar on Artificial Intelligence Applications in Industry , 2003, Kuala Lumpur.

Heriansyah, Rudi (2003) PCB Inspection Based On Wavelet and Morphological Image Processing Approaches. In: International Conference On Robotics, Vision, Information and Signal Processing, 2003, Pulau Pinang.

Hermawan, Dadan (2010) Chiral separation of econazole using micellar electrokinetic chromatography with hydroxypropyl-gamma-cyclodextrin. Journal of Pharmaceutical and Biomedical Analysis, 53 (5). 1244 - 1249.

Hermawan, Dadan (2008) Chiral triazole fungicides separation using micellar electrokinetic chromatography. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Hilmi, Zunairah (2010) Acoustic signal characterization of surface discharge on polymeric insulating materials under different contamination level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hitam, Ramli (2003) Carrier density and mobility of polypyrrole-cadmium sulfides nanocomposites. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

Hitam, Ramli (2003) Snthesis of electrically conductive polyaniline-poly (vinyl) composite. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ho, Chin Siong (2003) Application of Life Cycle Matrix (LCM) in energy demand analysis in residential sector. In: Seminar Proceedings The Planning of Urban Energy System-Seminar of JSPS-VCC, 2003, n/a.

Ho, Sze Phing (2008) Properties of fabricated fiber bragg grating for temperature sensing using phase mask technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ho , Nigel Ik Jung (2010) Extraction of buried pipes using ground penetrating radar images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hock Heng, Low (2003) Barriers to knowledge sharing : a study of manufacturing sector. In: International Conference of the Asian Academy of Applied Business, 2003, Kota Kinabalu, Sabah.

Hock Heng, Low (2003) A study of the ethical perception amongs Malaysian Public University. In: International Conference of the Asian Academy Applied Business, 2003, Kota Kinabalu, Sabah.

Hock Kheng, Sim (2003) Development of TPM implementation plan in switchgear & engineer company. In: International Conference on Mechanical Engineering 2003, 2003.

Hong Heng, See (2004) High performance liquid chromatographic separation of triazole fungicides using water-rich and superheated water eluent. In: Malaysian Symposium on Analytical Chemistry, 2004, n/a.

Hoo, Lai Wan (2003) The adoption of Japanese style of human resources management in small and medium size manufacturing companies in Malaysia. In: The Asian Academy of Management Conference 2003, 2003, Seattle, USA.

Hooi, Hon Mun (2011) Coordinated motion control of a pneumatic artificial muscle actuated robot arm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hooi Siang, Kang (2003) Virtual robot. In: International Conference On Advances in Strategic Technology 20, 2003.

Hooi Siang, Lim (2005) A USB device with parallel I/O and analog input. In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Hossain, Md. Golam Sorwar (2004) Analysis of transients in overhead telecommunication subscriber due to nearby ligthning return stroke. In: IEEE International Sympossium on Electromagnetic Compatibility, 2004, Colorado.

Hossein Gholizadeh, Shahaboddin (2012) An evaluation of statistical model for downscaling precipitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hossein Hosseini, Seyed Mohammad (2009) Numerical characterization of perforated metallic hollow sphere structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Behnam (2010) Human activities recognition under camera position-invariant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hosseini, Seyed Ehsan (2012) Performance evaluation of mild combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyed Hossein (2011) Comparative analysis of level of service (LOS) under varying lighting conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

How, Lay Lim (2010) Tahap kepuasan pelajar antarabangsa terhadap kemudahan fizikal Universiti Teknologi Malaysia ke arah universiti bertaraf dunia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Howe Hing, Tan (2003) Stabilization of nonholomic wheeled mobile robot through inte active force control. In: Advanced Technology Congress, 2003, Serdang, Selangor.

Huam, Hon Tat (2010) Are managerial competencies a blessing to the performance of innovative SMEs in Malaysia? International Journal of Economics and Management, 4 (1). 120 - 136.

Hudha, Khisbullah (2004) Online adaptation of fuzzy-PD controller of an active systems using gradient descent method with momentum terms. In: National Conference On Engineering And Technology , 2004, Kuala Lumpur.

Humam, Nooraini (2012) Correlations between compression index and basic soil parameters for fine grained soils in Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hung Chiew, Khor (2005) FPGA implementations of International Data Encryption Algorithm (IDEA) with Graphical User Interface (GUI). In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Husain, A. R. (2008) Asymptotic stabilization of an active magnetic bearing system using lmi-based sliding mode control. International Journal of Mechanical System Science and Engineering, 2 (1). 6 - 19. ISSN 1307-7473

Husain, A. R. and Ahmad, Mohamad Noh and Yatim, Abdul Halim Mohd. (2008) Asymptotic stabilization of an active magnetic bearing system using LMI-based sliding mode control. In: Conference of the World-Academy-of-Science-Engineering-and-Technology , 06th - 08th Feb 2008, Cairo, EGYPT.

Husaini Zakaria, Mohamad Asfa (2011) Impact of nanometer transistor on analog performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Husin, Abu Hassan (2012) Development of an enriched method for introductory physics laboratory work and its effects on students learning outcomes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Husin, Mohd. Zain (2010) Gaya pembelajaran kursus automotif berasaskan kompetensi dalam kalangan pelatih Giatmara Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Husin, Mohd. Zamri (2010) Penggunaan manual laporan cadangan pemajuan : kajian kes : JPBD Negeri Selangor, Majlis Bandaraya Shah Alam dan Perbadanan Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Husin, Siti Farhana (2012) External direct sum of fuzzy topographic topological mapping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Husna, A. N. (2004) Intercarrier Interference (ICI) analysis using correlative coding OFDM system. In: Role of Environment Science and Technology in Sustainable Development of Resources, 2004, n/a.

Hussain , Ahmad (2004) CFD modelling of an municipal solid waste combustor. In: Symposium of Malaysian Chemical Engineer, 2004, n/a.

Hussein, Abdul Halim (2012) A framework for an operational process based internet collaboration platform for interdisciplinary building design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussein, Liban Abdullahi (2010) Analysing the performance of acoustic channel for underwater wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hussein Jibril, Abdrahman (2012) Development of jamming method for policy enforcement in wireless campus environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, M. W. and Abdullah, K. and Menon, N. A. (2010) Utilization of palm oil fuel ash in aerated concrete. Mehran University Research Journal of Engineering & Technology .

Hussin, Mohd. Warid (2010) Effect of mixing constituent towards engineering properties of POFA cement-based aerated concrete. Journal of Materials in Civil Engineering, 22 (4). 287 - 295.

Huyop, Fahrul Zaman (2010) Agrobacterium tumefaciens-infection strategies for greater transgenic recovery in nicotiana tabacum ev. TAPM26. International Journal of Agricultural Research, 6 (2). 119 - 133.

Huyop, Fahrul Zaman (2003) Bioinformatic studies of different L-2 haloacid and D-2 haloacid dehalogenases from rhizobium sp. In: International Conference On Advances In Strategic Technologies , 2003, Kuala Lumpur.

Huyop, Fahrul Zaman (2010) Biolistic transformation of Citrullus vulgaris Schrad (watermelon). Biotechnology, 9 (2). 119 -130.

Huyop, Fahrul Zaman (2003) Comparative study of difference L-2 haloacid and D-2 haloacid dehalogenases from rhizobium sp. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

Huyop, Fahrul Zaman (2010) Cotyledon with hypocotyl segment as an explant for the production of transgenic citrullus vulgaris schrad (watermelon) mediated by agrobacterium tumefaciens. Biotechnology, 9 (2). 106 - 118.

Huyop, Fahrul Zaman (2010) An easy method for agrobacterium tumefaciens-mediated gene transfer to nicotiana tabacum cv. TAPM26. Journal of Biological Sciences, 10 (6). 480 - 489.

Huyop, Fahrul Zaman (2003) Expression in E.Coli and kinetic analysis of two 'rhizobial' genes encoding haloalkanoic dehalogenase of opposite stereospecificit potential use of dehd (dehalogenase d) for industrial process. In: The 13th Scientific Meeting and 14th Annual Meeting of Malaysia Society of Molecular Biology and Biotechnology, 2003, Putrajaya, Selangor.

Huyop, Fahrul Zaman (2003) Expression in E.Coli and modecular analysis of rhizobial dehalogenases E (dehE) Gene. In: National Biotechnology Seminar : DNA 50 Years and Beyond 2003, 2003, Selangor.

Hwee Ling, Wong (2004) Face detection on mobile robot for an intelligent human-robot interaction. In: International Conference on Artificial Intelligence in Engineering Technology, 2004, n/a.

Hwee Ling, Wong (2003) Skin colour detection for human -Robot Interaction (HRI) model. In: Engineering and Technology Conference, 2003, Kuching, Sarawak.

I

I. Yulianti, A.S.M. Supa’at, S.M. Idrus, A.B. Mohammad, A. Al-hetar, (2008) Beam Propagation Modelling of the Digital Response in Cosine S-bend Waveguide Branch. In: ICSE2008, 2008, Persada, Johor.

I. Yulianti, A.S.M. Supa’at, S.M. Idrus, A.B. Mohammad, A. Al-hetar, (2008) Comparison of Optical Parameters Performance of S-bend Branches for Digital Optical Switch Application. In: Proceeding of International Conference on Telecommunication (ICTel 2008), 2008, Bandung, Indonesia.

Iberahim, Zuhaida (2009) Perlaksanaan konsep 5:95 dalam sistem penyampaian perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ibnu Rasid, Elda Nurafnie (2012) Production of astaxanthin from microalgae. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Ab Latif (2003) Detection of foliar nutrients of oil palm crop using remote sensing. In: Asian Conference On Remote Sensing, 2003, Chiang Mai, Thailand.

Ibrahim, Ab. Latif and Tam, T . H . and Sa'ayou, M. S. (2010) Statictical analysis of annual rainfall distribution for water resource in Peninsular Malaysia using Satellite TRMM algorihm. In: MRSS 6th International Remote Sending & Gis Conference and Exhibiton (MRSS 2010), 28-29 April 2010, Kuala Lumpur.

Ibrahim, Abd. Jalil (2012) Time overrun in construction projects at Malaysian Palm Oil Board. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Abdul Latiff (2008) Value in the vision 2020 and Malaysian,development plan- a critical examination in respect of human resource development. In: The 1st International Conference of the south Asia Chapter of AGBA on Globalization & Change: Issues, Concerns & Impact , 2008, Islamabad, Pakistan.

Ibrahim, Fawazul Khair (2005) Keris Hulu Tajung as a hybrid of local traditional hilts. In: Int. Seminar Spirit and Form of Malay Design, 2005, Kuala Lumpur.

Ibrahim, Hafzan (2010) Gaya kognitif dan penguasaan kemahiran saintifik dalam kalangan pelajar Fizik bagi tajuk daya dan gerakan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ibrahim, Helmee (2011) Robot simulator model for robot ARM with five degrees of freedom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim, Ismail (2011) Classification algorithms for six types of defects on bare printed circuit boards. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Ismail (2000) The perception of Industrial related participants toward EEIT conducted short courses at MFI terms of knowledge and skill taught in the course content. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ibrahim, Ismail (2011) Strategic stakeholder management methodology for programme and project success in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Kamalia (2012) Keberkesanan pengurusan Panitia Pendidikan Islam dalam meningkatkan sahsiah pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ibrahim, Mohd. Haniff (2007) Polymer based multimode interference optical devices. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ibrahim, Mohd. Norazlen (2011) Amalan kuasa Pengetua dan impaknya terhadap komitmen guru kepada sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ibrahim, Mohd. Shukri (2009) Kerja sepasukan dalam pengurusan sukan di sebuah sekolah menengah kebangsaan di daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ibrahim, Mohd. Zamri (2011) Prediction of droplet dynamics on solid surface by the lattice boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mona Fatini (2010) Penyertaan awam dalam penyediaan rancangan tempatan: Kajian Kes : Rancangan Tempatan Serendah Hulu Yam 2000-2015. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate .

Ibrahim, Norkhair and Awang, Mohamad Arshad (2006) Aplikasi GIS dalam program penempatan semula setinggan. In: Inovasi Dalam Sistem Maklumat Geografi (GIS) 1. FKSG, UTM, Johor , 165 - 191. ISBN 978-983-52-0583-5

Ibrahim, Norkhair and Mahmud, Razali and Ngadirun, Alliza (2006) Perbandingan hasil perisian CARIS dan ArcView bagi paparan maklumat hidrografi 3D. In: Inovasi Dalam Sistem Maklumat Geografi (GIS) 1. FKSG, UTM, Johor , 193 - 209. ISBN 978-983-52-0583-5

Ibrahim, Sabrina (2007) Kemahiran generik di kalangan pelajar-pelajar di Fakulti Pengurusan Dan Pembangunan Sumber Manusia (FPPSM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ibrahim, Sallehuddin (2004) Real-time flow imaging using infra-red tomography. In: Industrial Electronic Seminar , 2004, n/a.

Ibrahim, Sofian (2003) Cecair ion: pelarut alternatif dalam sisntesis organic. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Ibrahim, Subariah (2003) Secure e-voting with blind signature. In: National Conference on Telecommunication Technology, 2003, Selangor, Malaysia.

Ibrahim, Suhaimi (2003) Change impact analysis for maintenance support. In: International Symposium on Information Technology, 2003, Kuala Lumpur.

Ibrahim, Suhaimi (2004) A software traceability tool to support impact analysis. In: Malaysian Science and Technology Congress, 2004, Selangor.

Ibrahim, Wan Azlina (2009) Claim due to discrepancies in contract documents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ibrahim, Zaharah (2003) Biological treatment of textile wastewater using biofilm. In: IWA Conference on Environmental Biotechnology, 2003, Kuala Lumpur.

Ibrahim, Zaharah (2010) Characteristics of developed granules containing selected decolourising bacteria for the degradation of textile wastewater. Water Science and Technology, 61 (5). 1279 - 1288.

Ibrahim, Zaharah (2008) Electrochemical study of stainless steel corrosion by marine sulphate-reducing bacteria. Sains Malaysiana, 37 (2). 155 - 160. ISSN 0126-6039

Ibrahim, Zaharah (2003) In situ bioremediation of textile effluent using biofilm. In: IWA Conference on Environmental Biotechnology, 2003, Kuala Lumpur.

Ibrahim Al-Ameen, Zohair Qays (2011) Restoring degraded astronomy images using a combination of denoising and deblurring techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim Al-Kilany, Athman Ahmed (2010) An adaptive burst size assembly technique for real-time traffics over optical burst switched networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim Elsiti, Nagwa Mejid (2011) Ergonomic study at stationary factory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idham, Zuhaili (2010) Stabilisation of anthocyanins from spray dried hibiscus sabdariffa extracts by encapsulating in different carrier agent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Idid, Syed Z. A. (2003) Asian value for asian heritage - towards reinventing formula for asian heritage charter. In: International Symposium and Workshop On Managing Heritage Environment In Asia, 2003, Shah Alam , Selangor.

Idid, Syed Z. A. (2003) Subang Jaya: an urban form beyond 2005. In: Seminar Majlis Perbandaran Subang Jaya, 2003, Subang Jaya, Selangor.

Idris, Ani (2003) Effect of bore fluid on reverse osmosis hollow fiber membranes. In: Scientific Conference of the Electron Microscopy Society Malaysia, 2003, Langkawi, Kedah.

Idris, Ani (2008) Enzymatic hydrolysis of treated palm oil empty fruit bunches fibre (efb) using combination alkali-microwave techniques. Journal of Biotechnology, 136 (Supp 1). S406. ISSN 0168-1656

Idris, Ani (2003) Lactic acid formentation from liquid pineapple using free immobilized lactobacillus delbrueckii ATTC 9649. In: IWA Conference on Environmental Biotechnology, 2003, Kuala Lumpur.

Idris, Ani and Ahmad, Iqbal and Francis Bakir, Mark (2006) Influence of formic acid/peg ratio on cellulose acetate dialysis membrane formation and urea clearance. In: Proceeding of the 20th Symposium of Malaysian Chemical Engineers 2006, 2006, Shah Alam, Selangor.

Idris, Ani and Mat Zain, Norashikin (2006) The role of different molecular weights polyethylene glycol (PEG) additives on poltethersulfone (PES) untrafiltration membranes. In: Proceedings of the National Seminar on Science & Its Application in Industry, 2006, Mahkota Hotel, Melaka.

Idris, Ani and Mat Zain, Norashikin (2006) Separation of treated palm oil mill effluent (POME) using fabricated pes ultrafiltration membrane. In: International Conference on Environment 2006, 2006, Grand Plaza Parkroyal, Penang.

Idris, Ani and N. A., Mohd. Zain (2006) Determination of effective diffusion coefficients in a PVA-alginate matrix used for the immobilization of biocatalyst. In: Proceedings KUSTEM Fifth Annual Seminar on Sustainability Science and Management, 2006, Primula Beach Resort, Terengganu.

Idris, Madihah (2010) Kajian kesesuaian Bandar Indera Mahkota sebagai pusat pentadbiran baru kerajaan Negeri Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Idris, Mardiana (2010) Using dialogue template in developing low proficiency English as a Second Language learners' oral fluency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Idris, Mohd. Hasbullah (2010) Artificial neural networks to predict of liquidus temperature in hypoeutectic Al-Si cast alloys. Journal of Applied Sciences, 10 (24). 3243 - 3249.

Idris, Mohd. Hasbullah (2010) Effect of ethanol as gasoline additive on vehicle fuel delivery system corrosion. Materials and Corrosion-Werkstoffe Und Korrosion, 61 (5). 432 - 440.

Idris, Mohd. Hasbullah (2003) Grain refinement of an investment cast magnesium based alloy used inmould and vibration techniques. In: Scientific Conference of Electron Micaroscopy Society of Malaysia, 2003, Langkawi, Kedah.

Idris, Mohd. Yazid (2008) An efficient on - line hurst parameter estimator for detecting volume - based network intrusion attacks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Idris, Noor Hidayah (2009) Differentiation of accelerants from background interference in the analysis of floor mat fire debris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Idris, Norhidayah (2009) Motivational factors that influence the learning of literature component in the English language syllabus among the form four students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Idris , Ani and Rosali, Mohammad Edziani (2006) Fabrication of cellulose acetate/chitosan blend membrane with different ratio of acetic acid/water. In: Special Topics In Bioprocess Engineering Volume I. Penerbit UTM, Johor , pp. 117-127. ISBN 978-983-52-0600-9

Idroas, Mariani and Garnett Green, Robert and Ibrahim, M. Nasir (2006) Optical tomographic instrumentation system based on charged coupled device (CCD) sensors. In: International Conference on Science & Technology: Application in Industry & Education 2006, 2006, Penang.

Idroas, Mohamad Yusof (2012) Design and performance study of an alpha V-type stirling engine converted from diesel engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ihekerenma Okpareke, Josephine (2010) Teachers perception of principals' instructional leadership functions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Imoudu, Enegbuma Wallace (2009) Extent of contractor's obligation to provide information and permitting access to his own records. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Inda Sukati, Inda Sukati (2010) Firm integration and supply chain orientation of food processing industry in South Sumatra Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Iqbal, Anjum (2004) Artificial immune system and immunoinformatic : bridging and immunology. In: International Conference on biomedical Engineering , 2004, Kuala Lumpur.

Iqbal, Anjum (2006) Danger theory metaphor in artificial immune system for system call data. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Iqbal, Anjum (2004) Distinct viewpoint in novel biologically inspired research: artificial immune system. In: International Conference on Artificial Intelligence in Engineering, 2004, n/a.

Iqbal, Anjum (2003) Towards experiencing a novel paradigm for intelligent computing artificial immune system. In: Seminar On Artificial Intelligence Applications In Industry, 2003, Kuala Lumpur.

Irandegani, Mohammad Yousef (2012) Exergy analysis on steam power plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Irhoumah, Jamal Mohamed Salih (2009) Comparison of digital photogrammetric software in the production of digital orthophoto and digital map. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Isa, Fadzlunesa (2011) Pola sahsiah diri dan faktor yang mempengaruhinya dalam kalangan penghuni perempuan Sekolah Henry Gurney Telok Mas Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Isa, Mohd. Hilmi (2012) Faktor-faktor yang mempengaruhi enrolmen pelatih di Pusat Giatmara Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Isa, Siti Hanani (2010) Analisis keperluan siswa-siswi Kolej Tuanku Canselor terhadap program dan kemudahan Surau As-Syakirin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ishak, Iryatie (2012) Characterization of purple anthocyanin as pH colour indicator and antioxidant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Ishak, Iskandar Shah (2008) Effect of surface roughness on drag of loggerhead carapace. Jurnal Mekanikal (26). 37 - 48. ISSN 0127-3396

Ishak, Iskandar Shah (2003) Experimental and Computational Fluid Dynamic (CFD) studies on half-model transport aircraft. In: International Conference On Mechanical Engineering, 2003.

Ishak, Izzuadi (2011) Qualitative risk management in Jabatan Kerja Raya (JKR) Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Natasha (2009) Penilaian kamera digital bagi pemetaan sungai menggunakan kaedah fotogrametri jarak dekat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ishaque, Kashif (2012) Deterministic particle swarm optimization method for maximum power point tracking of photovoltaic system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishiyaku Mbela, Abubakar (2012) The level of readiness in the use of e-learning in teaching among Physics teachers at Tertiary Institutions in Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Islam, M. Rafiqul (2008) Development of a mathematical model for analysis on ship collision dynamics. WSEAS Transactions on Applied and Theoretical Mechanics, 9 (3). 819 - 834. ISSN 1991-8747

Islam, Shah Jahirul (2006) Optimization of cable and source substation's location selections of power distribution networks. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ismael Khalifa Ahmed, Fath Elrahman (2012) Enhancement of data transmission for mobile multi hop relay worldwide interoperability for microwave access network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Abdul Samad (2003) Simplifying the development of collaborative courseware using j scripting language. In: Konvensyen Teknologi Pendidikan-16, 2003, Melaka.

Ismail, Afzal Umi (2012) Pola kecenderungan pemilihan bidang pengajian dalam aliran teknikal di kalangan pelajar cemerlang di Sekolah Menengah Teknik sekitar Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Ahmad Fauzi (2010) Application and challenges of membrane in surface water treatment. Journal of Applied Sciences, 10 (5). 380 - 390.

Ismail, Ahmad Fauzi (2010) Characterization and mechanical properties of polyacrylonitrile/silica composite fibers prepared via dry-jet wet spinning process. Materials Letters, 64 (17). 1875 - 1878.

Ismail, Ahmad Fauzi (2010) A comparative study on the structure and performance of porous polyvinylidene fluoride and polysulfone hollow fiber membranes for CO2 absorption. Journal of Membrane Science, 365 . 319 - 328.

Ismail, Ahmad Fauzi (2010) A developed asymmetric PVDF hollow fiber membrane structure for CO2 absorption. International Journal of Greenhouse Gas Control .

Ismail, Ahmad Fauzi (2010) Effect of additives on the structure and performance of polysulfone hollow fiber membranes for CO2 absorption. Journal of Membrane Science, 348 (12). 260 - 267.

Ismail, Ahmad Fauzi (2010) Effect of chitosan as a functionalization agent on the performance and separation properties of polyimide / multi-walled carbon nanotubes mixed matrix flat sheet membranes. Journal of Membrane Science, 364 . 309 - 317.

Ismail, Ahmad Fauzi (2010) Effect of LiCL concentration in the polymer dope on the structure and performance of hydrophobic PVDF hollow fiber membranes for CO2 absorption. Chemical Engineering Journal, 165 . 980 - 988.

Ismail, Ahmad Fauzi (2010) Effect of operating conditions on the physical and chemical CO2 absorption through the PVDF hollow fiber membrane contactor. Journal of Membrane Science, 353 (12). 192 - 200.

Ismail, Ahmad Fauzi (2010) Effect of polymer concentration on the structure and performance of polyetherimide hollow fiber membranes. Journal of Membrane Science, 36 (1 - 2). 103 - 111.

Ismail, Ahmad Fauzi (2010) Effect of raw multi-wall carbon nanotubes on morphology and separation properties of polyimide membranes. Separation Science and Technology, 45 (16). pp. 2287-2297.

Ismail, Ahmad Fauzi (2010) A mathematical analysis of hollow fiber spinning : bore and dope velocity profiles in the air gap. Journal of Membrane Science, 348 (1-2). 13 - 20.

Ismail, Ahmad Fauzi (2010) A new theoretical gas permeability model using resistance modeling for mixed matrix membrane systems. Journal of Membrane Science, 350 (1-2). 259 - 268.

Ismail, Ahmad Fauzi and A. M., Mimi Sakinah and Md. Illias, Rosli and Hassan, Osman and Zularisam, A. W. (2006) A study on the membrane cleaning and flux recovery of the fouled ultrafiltration membrane during cyclodextrins production. In: 11th Apcche Congress 2006, 2006, Kuala Lumpur.

Ismail, Ahmad Fauzi and A. M. , Mimi Sakinah and Md. Illias, Rosli and Hassan, Osman and A. W. , Zularisam (2006) The effect of cross flow velocity on the permeate flux during cyclodextrins bioseparation. In: 1st Regional Postgraduate Conference on Engineering & Science, 2006, Johor Bahru.

Ismail, Ahmad Fauzi and Zularisam, A. W. and Salim, M. R. and Mimi Sakinah, Mimi Sakinah (2006) Autopsies of fouled hollow fiber membranes in surface water treatment with immersed ultrafiltration membrane. In: Proceeding of the 20th Symposium of Malaysian Chemical Engineers 2006, 2006, Shah Alam, Selangor.

Ismail, Anarulakmal (2011) The profile of cases on injunction to performance bond. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Baba (2000) Penglibatan staf akademik Universiti Teknologi Malaysia (UTM) di dalam aktiviti penyelidikan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Dzulkifle (2010) Penggunaan komputer dikalangan guru-guru Kemahiran Hidup dalam urusan kerja di Sekolah-sekolah Kebangsaan Gred A daerah Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Farrah Syuhaida (2009) Pendekatan psikologi dalam menangani masalah disiplin pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Hairu Nazlina (2012) Measuring project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Hassan Fahmi (2011) Evaluation of selected cultivation systems for hybridoma PAP7. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail, Isnil Badril (2011) Faktor-faktor kejadian siling runtuh di bangunan kerajaan dan kaedah penambahbaikan bersesuaian dalam mengatasinya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Kelsom (2010) Aras penyoalan guru Pendidikan Islam dalam sesi pengajaran dan pembelajaran berasaskan taksonomi bloom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Khairiyah (2010) Extraction of tree structure and total above-ground biomass (TAGB) using LiDAR data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Maha Anim (2003) Kesan logam berat ke atas enzim esterase ikan tilapia hitam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohammad (2010) Compressive strength loss and reinforcement degradations of reinforced concrete structure due to long-term exposure. Construction and Building Materials, 24 (6). 898 - 902.

Ismail, Mohd. Azril (2012) The effects of job satisfaction, employee commitment and job involvement on safety performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ismail, Mohd. Khairul Hisham (2003) Resonans modes configurations for rectangular antenna based on model. In: Asia Pacific Conference On Communication 2003, 2003.

Ismail, Muhammad Faizal (2011) Frequency reconfigurable log-periodic antenna design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Munira (2007) Numerical solution of the interior Riemann - Hilbert problem on region with corners via boundary integral equation. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Ismail, Nadirah (2008) Treatment of petrochemical wastewater using bioparticles and selected bacterial consortium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, Noor Azam (2012) Kepimpinan guru mempengaruhi sikap pelajar sekolah menengah daerah Segamat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Nor Azlina (2008) The unsuccesful reasons of set-off in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Nor Ismadee (2010) Amalan asas keusahawanan oleh mekanik bumiputera luar bandar di sekitar Kulaijaya dan Benut, Pontian dalam memajukan perniagaannya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Normah (2012) The use of language learning contracts as a strategy to promote learner autonomy in language learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Nurul Adzura (2011) Statistical downscaling for climate change assessment on hydrology. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nurul Ain (2009) Maltodextrin and tapioca starch as wall material in ascorbic acid microencapsulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, R. (2004) An inverse fuzzy state space algorithm for optimization of parameters in a furnace system. In: Seinar on Passive Design consideration in the Built Environment, 2004, n/a.

Ismail, Razali (2008) Current-voltage characteristics of a silicon nanowire transistor. Microelectronics Journal, 40 (3). 547 - 549. ISSN 0026-2692

Ismail, Rodziah (2010) Kerjasama awam swasta (PPP) sebagai kaedah alternatif perolehan pembangunan fasiliti awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ismail, Shah Aruzaman (2009) Keberkesanan pemindahan latihan dikalangan pekerja di Suruhanjaya Pilihan Raya Malaysia, Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Ismail, Siti Rohana (2003) The investigation of an effect of stanum on nickel based catalyst hydrogen production in autothermal reactor system. In: International Symposium on Science and Technology, 2003, Kuala Lumpur.

Ismail, Suhana (2009) Implikasi perletakan terminal bas Klang Sentral terhadap pengguna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ismail, Suriatini and Bryan, MacGregor (2006) Hedonic modelling of B197 housing markets using geographical information system and spatial statistics : Glasgow, Scotland. In: International Real Estate Research Symposium 2006, 2006, PWTC, Kuala Lumpur.

Ismail, Syuhaida (2008) Understanding of the conceptual and phiosphical of Malaysia's version of private finance initiative (PFI) in the provision of public infrastructure. In: Management In Construction Researchers Association 7th Annual Conference( MICRA 2008), 2008, Universiti Islam Antarabangsa, Gombak, Kuala Lumpur.

Ismail, Syuhaida and Md. Yusof, Aminah (2009) Fair risk allocation in Malaysia's version of private finance initiative (PFI): a reality or a myth? In: CRIOCM 2009 International Symposium on "Advancement of Construction Management and Real Estate", 2009, Nanjing, China.

Ismail, Syuhaida and Md. Yusof, Aminah (2010) Private finance initiative in Malaysia. In: The CRIOCM 2010 15th International Symposium, 6-7 August 2010, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Ismail, Zaiton (2004) Penubuhan KUITTHO dan impaknya ke atas Pekan Parit Raja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ismail, Zuhaimy (2003) Development of goal programming model for evaluating forecaster figures in a delphi study. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

Ismail, Zuhaimy (2003) Rigorous mathematics and deductive reasoning - their adaptation Islam. In: International Seminar on Islam and the Challenges of Science and Technology in the 21st Century, 2003, Puteri Pan Pacific, Johor.

Ismail, Zuhaimy (2003) Tebu search heuristic approach for improving winter method of forecasting. In: Simposium Kebangsaan Sains Matematik, 2003, UMS, Sabah.

Ismail, Zuraini (2010) Examining information security concerns : case study of Malaysian academic setting. In: International Business Information Management Conference (14th IBIMA), 2010, Istanbul, Turkey.

Ismail, Zuraini and Masrom, Maslin and Mohamad Sidek, Zailani and Awang Mat Saaid, Ikhwan Zaini (2010) Bridging information security framework for higher learning institutions of Malaysia. In: International Conference on Information Management and Evaluation (ICIME 2010), 25-26 Mac 2010, South Africa.

Ismail , Nur Awatif (2010) Implikasi kegawatan ekonomi terhadap pemilikan harta tanah yang tertakluk kepada gadaian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail Norain, Abdelhafeez Ibrahim (2010) The importance of surfactants types and concentrations on carbon dioxide foam flooding for enhanced oil recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Isman, Sumi (2010) Faktor kepimpinan dan sistem ganjaran dalam mempengaruhi kreativiti dan inovasi pentadbiran di Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Istadi, Istadi (2003) Catalyst screening for CO2 oxidation coupling of methane to C2 hydrocarbons. In: International Conference On Chemical & Bioprocess Engineering, 2003, UMS, Kota Kinabalu, Sabah.

Ithnin, Masliana (2011) Treatability of leachate using EZ enzyme. Masters thesis, School of Graduate Studies.

J

Ja'afar, Nor Azlida (2010) Kepimpinan Pengetua yang menyumbang ke arah ilmu di sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jaafar, Juhana (2011) Development of sulfonated poly (ether ether ketone) triaminopyrimidine nanocomposite membrane for direct methanol fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Jaafar, Zuharah (2012) Application of vector autoregressive model in multiple time series. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jaapar, Jefri (2012) Biooxidation of pyrite using local isolates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jahandar, Nima (2011) Extent of road lighting impact on highway capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahanmirinezhad, Hossein (2011) Prediction of bearing capacity of bored pile socketted in limestone of varying rock quality designation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahanshaloo, Leila (2012) Simulation of contaminant removal using lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jalal, Noriah (2009) Kaedah mengajar yang berkesan dalam Pendidikan Teknik dan Vokasional (PTV). Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jalloh, Yaguba (2011) Comparative analysis between engineering survey and photogrametric techniques in plan production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Jamail, Shajarahtunnur (2003) Flavonoids from artocarpus teysmanii miq. In: International Seminar On Natural Product, 2003, UM, Kuala Lumpur.

Jamal, Noriani (2009) Hubungan tahap pengetahuan solat dan tahap amalan solat dengan pencapaian akademik di kalangan pelajar dalam Sekolah Rendah Kebangsaan Bukit Gambir, Ledang, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jamaluddin, Hishamuddin (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). 59 - 71.

Jamaludin, Azmir (2012) Removal of free fatty acid from crude palm oil using organic solvent nanofiltration (OSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaludin, Khairul Rijal (2010) Application of the Grey-Taguchi method to the optimization of Metal Injection Molding (MIM) process. Key Engineering Materials, 443 . 63 - 68.

Jamaludin, Khairul Rijal (2010) Development and characterization of titanium alloy foams. international Journal of Mechanical and Materials Engineering, 5 (2). 244 - 250.

Jamaludin, Khairur Rijal and Daud, Y. and Lucas, M. (2010) Finite element modelling of static and radial ultrasonic interface friction in compression test. In: Proc. of The 2nd Int Conference on Plant Equipment and Reliability, 2010, n/a.

Jamaludin, Khairur Rijal and Daud, Y. and Harun, M. R. and Rahman, M. N. A. and Ahmad, S. and Ibrahim, M. H. I. and Nor, N. H. M. (2010) Multiple performance optimization for the best Metal Injection Molding (MINM) green compact. In: International Conference on Plant Equipment and Reliability (ICPER2010), 2010, Kuala Lumpur, Malaysia, .

Jamaludin, Khairur Rijal and Daud, Y. and Lucas, M. (2010) Verification of interface friction of radial ultrasonic compression using FE simulation. In: International Conference on Plant Equipment and Reliability (ICPER2010), 15 - 17Jun 2010 , Kuala Lumpur, Malaysia.

Jamaludin, Khairur Rijal and Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Ariffin, Ahmad Kamal and Mohd. Ruzi, Mohd. Ruzi (2010) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. In: Proc. of The 2nd Int Conference on Plant Equipment and Reliability, 2010, n/a.

Jamaludin, Shafinaz (2010) Characterization, swelling behavior and field evaluation of oil palm empty fruit bunch based superabsorbent polymer composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamari, Nor Laili-Azua (2012) Simultaneous detection of anions and cations in post - blast explosive residues using capillary electrophoresis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamei, Saeed (2012) Aerodynamic characteristics of compound wing configuration of wing-in-ground effect vehicle. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamirun , Muhammad Kamil (2010) Remote sensing technique for crop identification and yield forecasting : a case study of pineapple crop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jamlie, Norhasni (2009) Factors that influences EDI adoption among SMEs in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Jamlos, Mohd. Faizal (2011) Switchable beam shaping antenna for wireless fidelity system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jampang, (2009) Measuring the level of pedestrian safety in Miri City. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Janarthanan, Sethu Madhavan (2011) Modeling 3D buildings of LOD2 from airborne point cloud using unsupervised classification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jani, Nor Akmalazura (2008) Chemical constituents and bioactivity of alpinia mutica and two varieties of alpinia galanga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jani, Shazali (2003) Faktor - faktor penghalang kepada penyertaan dalam program latihan di kalangan kakitangan pejabat pertubuhan keselamatan sosial Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Jantan, Sa'diah (2000) The relationship between length of teaching and industrial experienced with the level of teaching effectiveness among industrial and non-industrial experienced lecturers and instructors in teaching electrical engineering subjects in Malaysia France Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jasan Ahpandi, Nurul Amhani (2010) Hubungan antara gaya asuhan ibu bapa dengan personaliti pelajar di sebuah Sekolah Menengah Kebangsaan daerah Pontian, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jasimin, Tuti Haryati (2011) Tenants' preferences on facilities and design of apartment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jasmi, Kamarul Azmi (2004) Asas kebahagiaan rumahtangga mengikut paradigma Al-Nawawi. In: Seminar Pembangunan Keluarga Kebangsaan, 2004, n/a.

Jasmi, Kamarul Azmi (2005) Pembangunan modal insan yang sempurna menurut perspektif Al-Imam-Al-Nawawi. In: Persidangan Antarabangsa Peradaban Melayu II, 2005, Kuala Lumpur.

Jasmi, Kamarul Azmi (2004) Pembentukan tatacara kehidupan beradab : keperluan asas kanak-kanak Islam. In: Simposium Kebangsaan Kanak-kanak Menurut Perspektif Islam, 2004, Pulau Pinang.

Jasmi, Kamarul Azmi (2004) Pendidikan akhlak kepada Allah SWT : nadi penggerak pembanggunan peradapan insan. In: Seminar Antarabangsa Nilai Dalam Komuniti Pasca Modenisme, 2004, n/a.

Jasmi, Kamarul Azmi and Nor Muhamad, Nasrul Hisyam (2006) Pendekatan pengajaran & pembelajaran wuduk Rasulullah SAW dan para sahabat : satu pemerhatian kepada guru-guru pendidikan Islam. In: Wacana Pendidikan Islam Siri Ke-5, 2006, n/a.

Jaya Abdullah, Mohd. Mukhlis (2010) Measuring performance of maintenance contractors in Royal Military Air Force base in Subang, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jayabalan, Lechumanan (2009) Tabiat mencari maklumat menerusi internet dalam kalangan guru sekolah menengah di daerah Kluang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jebeli, Mehrnoosh (2012) Effects of total physical response storytelling on Iranian students' vocabulary acquisition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jeevaragam, Ponselvi (2003) Decision making in the assessment of bridge scour. In: Advanced Technology Congress, 2003, Serdang, Selangor.

Jema'on, Noor Azah (2011) Genome sequence survey of alkaliphilic bacillus lehensis GI and candidate genes involved in pH homeostasis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jemaat, Shahrudin (2009) Stres dan punca stres dengan hendak berhenti kerja di kalangan guru geografi daerah Kulai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jeong, Jinsoo (2010) Real-time noise canceling technique using FIR RLS algorithm : innovations-based inverse kepstrum. In: IEEE International Symposium on Industrial Electronics (ISIE 2010), 4-7 July 2010, Bari, Itali.

Jeong , Jinsoo (2010) Inverse kepstrum approach to FIR RLS algorithm and application to adaptive noise cancelling. In: International Conference on Industrial Technology (IEEE-ICIT 2010), 14-17 Mac 2010, Vina del Mar, Chile.

Jibril, Jibril D. (2010) Sustainable solid waste management in Universiti Teknologi Malaysia (UTM) toward making UTM a sustainable university. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jiiby Komuh @ Robert John, Jiiby Komuh @ Robert John (2000) Pengurusan bilik darjah dalam mengurangkan salahlaku disiplin pelajaran dalam kelas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jiran, Nur Syamimi (2012) Logistics strategy for implementation of industrialized building system in Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Johar, Foziah (2004) Contributions of Malaysian planning control towards sustainable development. In: 5th Int. Seminar on Sustainable Environmental Architecture , 2004, n/a.

Johar, Foziah (2003) Environmental sustainability in selected local areas. In: Seminar on Legal Regime of Sustainability Land Use and Environmental Development, 2003, Kuala Lumpur.

Johar, Foziah (2003) Keberkesanan alat kawalan perancangan dalam meningkatkan kualiti persekitaran. In: Seminar Kebangsaan Pengurusan Persekitaran 2003, 2003, Bangi, Selangor.

Johari @ Ismail, Ilawati (2012) Gaya dan ciri kepimpinan pengurus pertengahan Sekolah Menengah di Zon Bandar, daerah Segamat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Johnny, Jacinta (2011) Exploring primary students' difficulties in number sense. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Johnson, Olufemi Adebayo (2012) Extent of highway traffic shockwave velocity propagations by road humps. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jonet, Mohd. Anuar (2012) Extracellular protein secretion optimization in Escherichia coli by signal peptide mutation and additive supplementation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Joseph, Clarence (2011) Defining experiental tourism in a marketplace case study : Satok weekend market, Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Julas, Zakariyah (2001) Hubungan gaya kepimpinan pengetua dengan tekanan kerja pensyarah pensyarah di Maktab Perguruan Batu Pahat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Jumadi, Norhaslina (2009) The most significant characteristics in demoraphic factors and it's relationship in determining affordable house Johor Bahru case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jumaidin, Ridhwan (2012) Effect of heat treatment on the microstructures and mechanical properties of Fe-Ni-Cr superalloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jumat, Rahiman (2009) Sikap, konsep kendiri dan kecerdesan intelek pelajar-pelajar cemerlang dan lemah dan hubungannya dengan pencapaian akademik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Jungan, Jawan (2003) Hydrogen production from catalytic autothermal reforming of met using membrane reactor for fuel cell application. In: National Symposium On Science and Technology, 2003, UM, Kuala Lumpur.

Jusoh, Mazura (2010) The use of english as teaching medium for chemical engineering student: students' perception. In: 3rd Regional Conference on Engineering Education and Research In Higher Education, 7-9 June, 2010, Kuching, Malaysia.

Jusoh, Mazura and Mohd. Yunus, Rosli and Abu Hassan, Mohd. Ariffin (2010) Optimisation of wastewater volume reduction through dewatering using progressive freeze concentration system. In: International Conference on Process Engineering and Advanced Material in conjunction with 24th Symposium of Malaysian Chemical Engineers, 15-17 June, 2010, KLCC, Kuala Lumpur.

Jusoh, Mohd. Sefai (2006) Model CoCL yang berasaskan penggabungan konstruktivisme dan pembelajaran koperatif dalam pemupukan kemahiran penyelesaian masalah dan membuat ramalan dalam tajuk pecahan. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Jusoh, Muhamad Anuwar (2011) Stress analysis of welded ellipsoidal end-to-shell joint of a stainless steel tank. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, Naziha (2010) Pembangunan empangan Tasik Kenyir dan kesannya terhadap sosioekonomi penduduk tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Jusoh, Zainuddin (2009) Kecerdasan emosi (EQ) dan hubungannya dengan komitmen kerja dalam kalangan guru Sekolah Menengah Kebangsaan Mersing, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

K

Kabir Ahmad, Farzana (2012) Inference and synergy networks for prediction of breast cancer metastasis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kadikon, Sulaiman (2006) The Bakun Hydro Electrical Project (HEP) Sarawak, Malaysia : the manifestation of Islamic system between environment & development. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Kadikon, Sulaiman and Misnan, Mohd. Saidin (2006) The basic of Islamic system towards the balance between environment and development. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Kadir, Kartini (2010) Faktor kejayaan kritikal usahawan Melayu di negeri Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Kalantarifard, Amin (2011) Identification of the municipal solid waste characteristics and potential of plastic recovery at Bakri, Landfill, Muar Malaysia. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Kama, Mohd. Nazri (2010) Considering patterns in class interactions prediction. Advances in Software Engineering, 117 . 11 - 22.

Kamal Alavi, Seyed Vahid (2012) Analyzing and assessment of Johor Bahru urban bus routes using GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Kamal Baharin, Safiza Suhana (2002) Analisis penggunaan sistem maklumat geografi untuk pembangunan mapan Pulau Tioman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kamal Hassan, Tagrid Fouad (2009) Arab postgraduate learners' listening comprehension problems with lectures in English. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kamali, Fatemeh (2012) Imperialisme competitive algorithm for distribution problem in supply chain network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaludin, Julina (2012) Kepimpinan transformasinol Pengetua dan hubungannya dengan motivasi guru di tiga buah Sekolah Zon Labis daerah Segamat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kaman, Aini (2009) Kepimpinan situasi dalam kalangan Guru Besar daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kamaruddin, Kamsaini (2000) Faktor demografi yang mempengaruhi gaya dalam membuat keputusan di kalangan pengurus peringkat pertengahan : kajian di Universiti Teknologi Malaysia Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Kamarudin, K. S. N. (2010) Effect of PVP concentration on the formation of size and shape of gold (Au) nanoparticles for mercury adsorption. In: International Conference on Process Engineering and Advanced Materials 2010, 15 -17 June 2010, Kuala Lumpur.

Kamarudin, Khairul Hisyam (2004) Strategi pembangunan mampan masyarakat orang asli luar bandar. In: Seminar Perancangan Kebangsaan kali ke -22, 2004, UTM.

Kamarudin, Khairul Sozana Nor (2008) Absorption of co2 and ch4 on metal cation exchange zeolite. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp Ed.). 82 - 90. ISSN 1823-5255

Kamarudin, Khairul Sozana Nor (2008) Methane adsorption on structurally different zeolites spectroscopy of methane absorption on zeolites. ASM Science Journal, 2 (1). 35 - 44. ISSN 1823-6782

Kamarudin, Khairul Sozana Nor (2010) Stability of emulsion liquid membrane containing triethanolamine to separate carbon dioxide. In: International Conference on Process Engineering and Advanced Materials 2010, 15 -17 June 2010,, Kuala Lumpur.

Kamarudin, Masrul Amri (2003) Enhanced algorithm of decision tree technoques in data mining intrusion detection system. In: International Symposium On Information Technology, 2003, Kuala Lumpur.

Kamarudin, Mohd. Rashidan (2002) Penyediaan rizab kemudahan awam di pemajuan perumahan berskala kecil : kes kajian : Bandar Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kamarudin, Nornadiah (2012) Mathematical modeling of water pollutant transport. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kamarudin, Nur Hidayatul Nazirah (2011) Preparation of platinum/electrogenerated zinc supported on zeolite beta for n-pentane isomerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Kamarul Baharin, Kamariah Dzafrun (2009) Mewujudkan satu institusi pengurusan penyelesaian pembahagian harta pusaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kamarullah, Shahida Hanum (2010) Optical properties of sensitized tin dioxide thin film prepared by using sol-gel spin coating method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kamaruzaman, Nurulziha (2009) Kesesuaian pelaksanaan Program Pendidikan Khas di Politeknik Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kamarzaman, Mohd. Sukri (2010) Pulangan abnormal bagi amanah pelaburan harta tanah di Malaysia (M-REIT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Kanagaratnam, Thavaselvam (2006) Factors influencing process facilitation conducted by internal consultants in Malaysian Corporate Organisations. PhD thesis, Universiti Teknologi Malaysia, Pusat Perniagaan Teknologi Termaju.

Kandasamy, Prabaharan (2011) Priority based handoff for scanning delay reduction in voice over wireless local area network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information.

Kanniah, Kasturi Devi (2010) Preliminary of the impact of atmospheric aerosols on climate change in peninsular. In: International Society for Photogrammetry and Remote Sensing) Technical Commission VIII (Remote Sensing) Technical Commission VIII (Remote Sensing Application & Policies) Symposium, 9-12 August 2010, Kyoto International Conference Centre, Kyoto, Jepun.

Kanniah, Kasturi Devi and Jason, Beringer and Lindsay , Hutley (2010) Analysis of the spatial and temporal variability of savanna productivity in the Northern Territory, Australia using Moderate Resolution Imaging Spectro-radiometer (MODIS) data. In: International Society for Photogrammetry and (Remote Sensing) Technical Commission VIII (Remote Sensing Application & Policies) Symposium, 9-12 August 2010, Conference Centre, Kyoto, Jepun.

Karasi Manickam, Mangair (2012) Effectiveness of discretized data set on multilayer perceptron network with particle swarm optimization in classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karim, Khairul Anuar (2009) Isu penswastaan pengurusan sisi pepejal di Negeri Sembilan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Karim, Nur Aqma (2010) Study on soil loss in the Iskandar development region, Johor Bahru using remote sensing and gis technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Karimian, Hamed (2010) Accuracy assessment of airborne global positioning system data in aerial triangulation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Karpudewan, Sathiasilan (1998) Study on the prediction of ground level sulfur dioxide dispersion from a power plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Kasim, A. Bakar (2003) Mengenal pasti sebab kelewatan kelulusan proses pra-pembangunan tanah (Tukar syarat dan pecah sempadan) dan cara mengatasinya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kasim, Ahmad (2009) Kepuasan kerja dan keperluan perkhidmatan kaunseling di Bahagian Khidmat Pengurusan Lembaga Perindustrian Nanas Malaysia Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kasim, Azman (2010) Physical and optical properties of neodymium doped and neodymium/erb ium co-doped tellurite glass system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Kasim, Ishak (2009) Punca dan tahap stres dengan hendak berhenti kerja di kalangan guru di daerah Kota Tinggi, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kasiman, Erwan Hafizi (2012) Mixed formulations for Navier Stokes equations with magnetic effect in rectangular channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kasman, Mazni (2009) Penilaian Berasaskan Sekolah (PBS) dalam Kerja Kursus Geografi (KKG) dan kesannya terhadap pencapaian pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kasmoni, Abdul Hadi (2008) Kepuasan pelanggan terhadap fasiliti bilik darjah dan kesanya terhadap tingkahlaku pembelajaran pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kassim, Azman (2004) Computational of slope stability by strength reduction. In: Seminar Penyelidikan Kejuruteraan Awam , 2004, n/a.

Kassim, Khairul Anuar (2010) Analytical and numerical study of horizontal anchor plates in cohesionless soils. Electronic Journal of Geotechnical Engineering, 15 C . 1 - 12.

Kassim, Khairul Anuar (2004) Effect of vertical sand drain on the rate of consolidation. In: Seminar Penyelidikan Kejuruteraan Awam , 2004, Skudai.

Kassim, Khairul Anuar (2003) Electrokinetic processing on a tropical red soil. In: International Conference On Advances In Soft Soil Engineering a Technology, 2003.

Katimon, Ayob (2003) The irreversible hydrology of reclaimed tropical peat basin : is restoration possible? In: East-Asia Regional Seminar On River Restoration , 2003, Kuala Lumpur.

Katip, Khairulhelmi (2008) Persekitaran kampus dan hubungannya dengan pembentukkan personaliti di kalangan pelajar Universiti Teknologi Malaysia, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kaveh, Deilami (2011) Assessment of accuracy of digital elevation model generation from aster stereo images by using rational polynomial coefficients and toutin's models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Kayal, Amir (2011) The association of 1st and 2nd generation of "CPTED" in securing neighborhoods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kazemi, Mohammad Saeed (2010) Ant colony optimization-based data clustering for DNA computing readout implemented on DNA engine opticon2 system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kazi, Suhail (2011) Smart glove for active tremor control. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kazunori, Nosaka (2005) Light concentric exercise has a temporarily analgesic effect on DOMS but no effect on recovery from eccentric exercise. In: 10th Annual Congress of the ECSS, 2005, Belgrade.

Kee, Chung Hau (2008) Pola personaliti, pola pemikiran kritis serta pola kepelbagaian kecerdasan di kalangan pelajar cemerlang : satu kajian kes di Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kee, Cindy Li Lin (2010) Sustainable students lifestyle in achieving sustainable campus concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kee Jiar, Yeo (2010) Development of an effective assessment and training support system for cognitive ability for special children. Wseas Transactions on Computers, 9 (9). 1022 - 1031.

Kek, Bee Wen (2010) Macroeconomic factors affecting house prices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Kelechukwu, Ekeh Modesty (2010) Predicting paraffin wax deposition and its prevention during crude oil production in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Keng Su, Teoh (2005) Email service server by using the Simple Mail Transfer Protocol (SMTP). In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Kepal @ Nasir, Abdul Al-Razzaq (2012) User satisfaction and perception on additional requirements of computer aided facilities management in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Keshavarz, Meysam (2012) Thermal barrier coating on gamma titanium aluminide by EB-PVD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Keshavarz, Soolmaz (2011) The relationship between anxiety and reading comprehension among Iranian UTM students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Khairuddin, Uswah and Ibrahim, Zuwairie and Yusof, Rubiyah and Khalid, Marzuki (2010) Optimized feature selection for tropical wood species recognition using genetic algorithm. In: International Symposium on Robotics and Intelligent Sensors (IRIS 2010), 8-11 Mac 2010, Nagoya, Jepun.

Khakdaman, Masoud (2012) Robust optimization of tactical production planning in a MTS-MTO environment under demand, process and supply uncertainties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Marzuki (2004) Design of an intelligent wood recognition system for tropical wood species. In: Malaysian science And Technology Congress selangor, 2004, n/a.

Khalid, Marzuki and R., Yusof and R., Abdul Rahman (2010) Fault detection and diagnosis for process control rig using artificial intelligent. ICIC Express Letters, 4 (5 B). 1811 - 1812. ISSN 1881-803X

Khalifah, Zainab (2003) Tour guiding in Malaysia : professionalism, issues and challenging. In: National Tourism Educators Conference, 2003, n/a.

Khalik, Mohd. Zacaery (2012) Post-combustion analysis of remaining animal tissue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalil, Mohammed Mohammed Sayim (2010) Fingerprint verification based on statistical features of co-occurre nce matrices. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Khalili, Amelia Ahmad (2007) Cloning and expression of B-N-acetylglucosaminidase gene from trichoderma virens UKM-1 in escherichia coli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Khamis, Azme (2003) Perbandingan di Antara Regresi Bergande Komponen Utama dalam Menganggar Harga Minyak Sawit Mentah. In: Simposium Kebangsaan Sains Matematik, 2003, UMS, Sabah.

Khan, Adnan Shahid (2012) Medium access control security mechanism for mobile multihop relay WIMAX networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khan, Amjad Rehman (2010) Offline cursive handwritten character recognization using heuristics techniques. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Khan, Ilyas (2012) Exact solutions of unsteady magnetohydrodynamic flow of non-newtonian rate type fluids. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khan , Amin-ud-din H. R. (2010) An empirical investigation of structural conditions and maintenance practices of Universiti Teknologi Malaysia buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khasim, Muhammad Syukri (2011) Benchmarking JKR quality management system with industry best practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khatamirad, Mona (2011) Development of an expert system for machine maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khazali, Norizan (2007) Isu pelupusan tanah secara pemberimilikan di Negeri Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kheirandish, Somayeh (2012) Comparison of interpolation methods in prediction the pattern of basal stem rot diesease in palm oil plantation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khidzir, Suhaili (2009) Kajian kepuasan pelanggan terhadap kualiti perkhidmatan kaunter mengikut model servqual. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Khokhar, Rashid Hafeez (2003) Design and development of neural bayesian approach for unpredictable stoch exchange databases. In: International Conference On Cyberworlds, 2003, Selangor.

Khokhar, Rashid Hafeez (2003) Linguistic rules-tree for classification of fuzzy data. In: Artificial Intelligence Applications In Industry, 2003, Selangor.

Khokhar, Rashid Hafeez (2011) Traffic-aware routing and obstacles modeling in vehicular ad hoc networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Khoo, Khyou Len (2010) Online implementation of bimodal biometric system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khoo, Mei Leng (2010) Penilaian pencapaian program pembasmian kemiskinan bandar kajian kes : Majlis Perbandaran Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Khooy Yazdi, Mahsa Khosh (2011) Preparation of zinc (II) porphyrin with a mesoporous structure and its photoctalytic properties for the oxidation of aromatics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khoshraftar, Alireza (2012) Developing the customer relationship management (crm) in health care organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khosravani, Mohammad Reza (2012) Vibration analysis of modeled composite aircraft wing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khosravi, Amir (2011) Managing unexpected events in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kia Eng, Goh (2004) A 3-level endpoint detection algorithm for isolated speech and frequency-based features. In: International conference On Control, Automation And system , 2004, Thailand.

Kibirige, George William (2012) Awareness of information disclosure on social network sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kiew, Siaw Juie (2003) Organobentonite composite material for removal of pesticides in drinking water purification process. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Kimi, Melody (2012) Visible light active metal sulfides photocatalyst for hydrogen evolution in aqueous solution. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kipli, Kumalasari (2009) Discrepancies and ambiguities in contract document. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kiu, Kelvina Siu Jen (2011) Contractors' preception towards public-private partnership in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koammapat Sam Ruai, Malisa (2010) The relationship between informal workplace learning and job satisfaction among property executives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Koay, Chee Ming (2010) Equipment failure mode and effects analysis (FMEA) in Altera Corporation (M) SDN. BHD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koay, Dong Liang (2009) Investigating the role of the learner's culture in reading comprehension activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Koh, Jackline Siang Joon (2010) Factors affecting shopping complex occupancy in Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Kok, Yit Pong (2003) Rough set discretization for numeal attributes : a preprocessing stock market prediction. In: Seminar Sains Aktuari dan Matematik Kewangan , 2003, Bangi, Selangor.

Kok Boon, Tan (2005) Graphical user interface and device driver for USB controller. In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Kormin, Norjana (2012) Kreativiti dan pencapaian akademik dalam mata pelajaran Kemahiran Hidup sekolah rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kormin, Saniah (2003) Effect of heat processing on antioxidant capacity of centella a drink. In: International Conference on Chemical & Bioprocess Engineering, 2003, UMS, Kota Kinabalu, Sabah.

Kosnan, Mahidah (2009) Pelaksanaan kokurikulum oleh guru-guru di sebuah sekolah menengah dua sesi di Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Koutenaei, Darafsheh Javadian (2011) Influence of pocket park on pattern of behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Krishnan, Krishananvani (2011) Implikasi persekitaran terhadap pembangunan rohani pelajar di Institut Kemahiran MARA (IKM) Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Krishnan, Shamala (2010) The effects of thinkquest portal and project-based learning on English language learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Krishnasamy, Selvadorai (2000) Sikap pelajar-pelajar sekolah India sekolah menegah terhadap perkhidmatan bimbingan dan kaunseling (PBDK) di sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kuan, Wai Tai (2004) Development of visual based obstacle avoidance for mobile robaot optical flow. In: International Conference on Artificial Intelligence in Engineering Technology, 2004, n/a.

Kubota, Muhammad Tetsu (2004) Measurement of the wind flow in resident area of Johor Bahru metropolitan city: towards planning guidelines for energy saving city in Malaysia. In: Simposium Kebangsaan Dinamika Masyarakat Bandar ke Arah Mencapai Kualiti Hidup Mapan, 2004, Petaling Jaya.

Kuldas, Seffetullah (2011) The unconscious thinking processes of students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kumar, Vasukey Palany (2003) Proses pemerolehan teknologi pengesan banjir telemetri : satu kajian di jabatan pengairan dan saliran negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Kuppusamy, Ganesan (1999) Teaching poetry in Malaysian secondsry schools using the integrated approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Kurdir Singh, Kamaljit Singh (2010) Improvement and analysis of software for lightning protection system design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kurnia, Aztri Yuli (2012) Extent of road lighting impact on the quality of roadway service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kusirirat, Kathawut and Techitdheera, Wicharn and Ali, Jalil and Yupapin, Preccha P. (2010) Dark soliton array generation using fiber loop and ring resonators. Applied Optics, 49 (14). p. 2581. ISSN 0003-6935

Kusmiyati, Kusmiyati (2006) A single-step catalytic process for the conversion of methane to gasoline over tungsten zeolite catalysts. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Kusuma, Hamdan Hadi (2004) Relation between temperature gradient at growth interface rate in czochralski LiNbO3 examined by heat balance equation. In: Regional Conference on Solid State Science And Technology , 2004, Kota Kinabalu.

Kusuma, Hamdan Hadi (2012) Structural and optical properties of sapphire doped transition metals single crystal by Czochralski method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kusworo, Tutuk Djoko (2003) Application of response surface methodology to optimize the cat oxidation of methane to hydrogen for fuels cells system using co catalyst. In: International Conference on Advances in Strategic Technologies, 2003.

Kusworo, Tutuk Djoko (2003) Autothermal reforming of methane to hydrogen production over cobalt-nickel catalyst supported MgO solid solution. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Kusworo, Tutuk Djoko (2003) Optimization of partial oxidation of methane to hydrogen production over NiO-CoO-MgO solid solution catalyst using statistical experimental design. In: National Symposium on Science and Technology, 2003, Selangor.

Kweku, Hammah Noriss (2009) Issues of delay in the land development process by obtaining a building permit in Malaysia and Ghana. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kwong, Shuk Wah (2000) Tinjauan terhadap keberkesanan pengurusan panitia Bahasa Inggeris dan kaitannya dengan pencapaian prestasi Bahasa Inggeris di Sekolah-sekolah Menengah di Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

L

L. Ong, K. (2004) A state approach to the management of concurrent design task design of symmetrical woble plate compressor. In: International Seminar And Workshop on Engineering Design In International product Development , 2004, n/a.

Lahom, Mohd. Khairil Azley (2010) Faktor-faktor yang mempengaruhi tahap keselesaan tempat kerja dari aspek pengurusan perkhidmatan bangunan pejabat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lai, Khin Wee (2012) Foetal abnormalities detection based on three dimensional nuchal translucency. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biomedical Engineering and Health Science.

Lai, Say Aik (2009) Mechanical and morphological properties of polyamide 6/high density polyethylene nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Laile, Hamizah (2009) Preservice teachers' acceptance on the use of web 2.0 in informal learning and its relation with learning style. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lalu Mulyadi, Lalu Mulyadi (2008) Karektor dan konsep susun atur ruang bandar bersejarah Cakranegara Indonesia. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Lam, Peng Soon (2000) Some effects of tasks on group interaction in second language acquisition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lateh, Saidin (2010) Kawasan pemajuan mengikut akta perancangan bandar dan desa, 1976(bahagian VIII) sebagai kaedah penawaran tanah di kawasan bandar kajian kes : PBT di daerah Johor Bahru dan Kulaijaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Latif, Famiza (2004) Thin film electrolytes based on poly (Methy) ENR 50 blend : lithium salt effect. In: Regional Conference on Solid State Science And Technology , 2004, n/a.

Laton, Siti Zawiyah (2009) Pelaksanaan program kelas intervensi awal membaca dan menulis oleh guru di sekolah-sekolah rendah zon Majidee, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lau, Buck Hoon (2008) Analysis of parameters that impacting performance of orthogonal frequency division multiplexing transmitter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lau, Chai Wee (2009) An investigation of the learner's achievement through web-based instruction on the concept of organic chemistry mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lau, Cher Chien (2012) Construction of a digital resource information and diagnostic tool for brain diseases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Lau, Chin Guan (2003) Phase transformation of mesoporous molecular sieves: effect of hydroxide. In: Simposium Kimia Analisis Kebangsaan, 2003, Selangor.

Lau, Chui Leh (2011) Accuracy assessment of aerial triangulation using different format of aerial photographs and digital photogrammetric software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lau, Chung Haw (2010) The relevance of listed property firms' annual disclosure with stock market return. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lau, Hwee Jeen (2010) Kedudukan tuan tanah dan pembeli sebelum pendaftaran pindahmilik terhadap wang pampasan akibat daripada pengambilan balik tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lau, Ki Chuan (2000) Tinjauan amalan faktor-faktor pengurusan sekolah berkesan dalam menentukan tahap pengurusan sekolah di sebuah sekolah menengah dalam daerah Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lau, Kok Wai (2003) A study to determine the level of compliance to eudralex good manufacturing practice (GMP) guidelines for licensed pharmaceutical and over the counter product manufacturers in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Lau, Sing Hian @ Bing Hian (2008) The diffusion of homegrown technological innovations in the Malaysian construction indudstry. PhD thesis, Universiti Teknologi Malaysia, Pusat Perniagaan Teknologi Termaju.

Lawal, Musa (2011) A cost effective screening tool for carbon emission planning in buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Le Tran, Trung Kien (2012) Determination of safety inventory under uncertain conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lebayesh, Siham Mohammed (2012) The conformal mapping method for solving mixed boundary value problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Chai Eam (2000) Hubungan demografi dengan kategori masalah pelajar-pelajar universiti tahun 1 dan tahun 4 di Fakulti Pendidikan Universiti Teknologi Malaysia, Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lee, Chew Tin (2008) Application of effective microorganisms on solid and maize. Journal of Chemical and Natural Resources Engineering - Advances in Product Development, 2 (Sp Ed.). 1 - 13. ISSN 1823-5255

Lee, Chew Tin (2008) Estimating the insulin dependent glucose uptake from the translocation of glut4 using levenbergmarquardt feedfoward networks. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 1 - 17. ISSN 1823-5255

Lee, Chew Tin (2008) Estimating the Michaelis-Menten kinetics of the GLUT4 action using genetic algorithm. Journal of Chemical and Natural Resources Engineering - Modeling Inovation, 2 (Sp Ed.). 74 - 90. ISSN 1823-5255

Lee, Chew Tin (2008) Hydrolisis of palm olein to oleic acid using immobilized lipase in a recirculated packed bed batch reactor. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp Ed.). 10 - 20. ISSN 1823-5255

Lee, Chong Zen (2010) Factors affecting industrial purchase of hygiene chemical in food processing factory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Lee, Ing Chen (2003) Adaptive learning of inverse kinematics transformation for robot manipulators using chaotic neural networks. In: Seminar On Artificial Intelligence Applications In Industry, 2003, Kuala Lumpur.

Lee, Jen Loong (2010) A study on quality deviations in sewerage construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Lee, Kean Teong (2012) Numerical analysis of precast prestressed hollow core slab with concrete topping under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Kean Wah (1999) Learner training in the use of language learning strategies in learning English as a second language in a Malaysian form four classroom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lee, Khai Ling (2012) Visual arts in counselling adults with depressive disorders. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lee, Kian Keat (2008) The use of low cost zeolities for the removal of selected contaminants and combination with biological process for wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Min Lee (2008) Influence of rainfall pattern on suction distribution and slope stability. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Lee, Ming Foong (2008) Pendekatan pembelajaran berteraskan visualisasi bagi lukisan kejuruteraan dalam topik pandangan tambahan berasaskan kognitif visual. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Lee, Muhammad Hisyam (2008) Identifying factors affecting data delivery performance in mobile ad-hoe network routing using a systematic approach. Matematika, 24 (1). 43 - 51. ISSN 0127-8274

Lee, Muhammad Hisyam and Hamzah, Nor Aishah and Suhartono, Suhartono (2010) Calendar variation model based on time series regression for sales forecasts : the ramadhan effects. In: The Regional Conference on Statistical Sciences (RCSS'10), 13-14 June 2010, New Pacific Hotel, Kota Bharu, Kelantan.

Lee, Siaw Li (2012) Cocoa powder production process quality control using multivariate approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Siew Ling (2010) Effect of terminal branching on mesomorphism of a homologous series of Schiff base ethers. Scientific Research and Essays, 5 (19). pp. 3018-3026. ISSN 1992-2248

Lee, Sooi Chuen (2000) Relationship between knowledge management and information technology infrastruktur with project performance in construction consulting companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Tin Sin and Rahman, W. A. W. A. and Rahmat, A. R. and Khan, M. I. (2010) Detection of synergistic interactions of polyvinyl alcohol–cassava starch blends through DSC. Carbohydrate Polymers, 79 (1). pp. 224-226.

Lee, Ting Hun (2011) Thermal inactivation kinetics of crude peroxidase and polyphenol oxidase from pineapple and long bean. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Zhi Sam (2010) Enhanced feature selection method for illicit web content filtering. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Lee , Chow Siang (2010) Keperluan terhadap Malaysian Land Integrated Information Services (MyLIIS) bagi firma penilaian harta tanah kajian kes : Firma Penilaian di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lee Chin, Yeo (2003) Advancement of bioinformatics in Malaysia. In: Advanced Technology Congress, 2003, Serdang, Selangor.

Lee Eng, Thian (2004) Modulation of beam polarization by using pockels effect. In: Malaysian Sciences and Technology Congress, 2004, Selangor.

Lek, Hsiao Yen (2010) Perceived importance of e-journals and it's association with e-satisfaction among international postgraduate students in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Leong, M. Salman (2008) Application of vibration and oil analysis for reliability information on helicopter main rotor gearbox. Journal of System Design and Dynamics, 2 (1). 370 - 381. ISSN 0387-5024

Leong, M. Salman (2008) An experimental study of cavitation detection in a centrifugal pump using envelope analysis. Journal of System Design and Dynamics, 2 (1). 274 - 285. ISSN 0387-5024

Ler, Chun Lee (2009) Design of complementary metal -oxide - semiconductor radio frequency modules with active inductor using standard complementary metal -oxide- semiconductor process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lessanibahri, Sina (2011) A generic facility location network design for a closed-loop supply chain using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

lhedyan, Mohammed Abdulmohsen (2009) Urban change detection of Al-Khafji city Saudi Arabia using remote sensing data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Liaghat, Mahsa (2012) Site selection for costal tourism resort using geographic information system and analytical hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Liang, Teng Ching (2012) Entrepreneurial attitudes among the profession of facilities management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Liang, Teng Ching (2010) Kajian ke atas kriteria bidang pengetahuan dan kemahiran insaniah yang perlu diterapkan ke dalam program pentadbiran dan pembangunan tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Liboh, Helbin (2011) Computer-based malay speech analysis system for speech theraphy system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liew, Bernard Chau Min (2007) Causes of delay in the processing of land application for state land in Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Liew, Lee Yin (2010) Hubungan antara iklim organisasi dengan prestasi kerja di kalangan pekerja-pekerja di Leeden Sdn. Bhd. Shah Alam, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Lim, Chong Sing (2008) Kajian keberkesanan penggunaan perisian multimedia prasekolah berasaskan teori perkembangan kanak-kanak dalam pembelajaran matematik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lim, Hui Fern (2009) Keberkesanan perlaksanaan persekitaran e-pembelajaran di Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lim, Jason Say Kai (2012) Improving work motivation of first line managers in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Kah Seng (2012) Improving graphical password anti-shoulder surfing technique for mobile device using painting album mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Keat Eng (2011) Pelaksanaan rekabentuk jalan dengan menggunakan pendekatan pengurusan nilai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lim, Kee Ley (2007) Soil confinement system to prevent slope failure on clayey soil. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Lim, Mei Keng (2009) Examining the relationship between locational preferences and property prices using hedonic model : case study : Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Lim, Meng Hee (2010) Application of wavelet transform analysis for the diagnosis of blade faults in rotating machinery. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Lim, Paw Serng (2000) Quality improvement program at Broadway Pulp Packaging Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, International Business School.

Lim, S. K. and Hussin, M. W. and Ling, T. C. (2010) Strength properties of self-compacting mortar mixed with GGBFS. Construction Materials Journal, Institution of Civil Engineering .

Lim, Siet Fah (2010) Kemahiran-kemahiran yang penting terhadap kerjaya Juruteknik Bioperubatan daripada perspektif majikan dan pekerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lim, Siew Huang (2008) Students' preferences on the design of electronic teaching presentation and their learning style. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lim, Siew Kuan (2001) Kajian kes ke atas pemindahan teknologi melalui pelaburan asing langsung (FDI) & keberkesanannya di sebuah syarikat multinasional Jepun. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Lim, Wan Hong (2001) Design and construction of stepped test cell ultrasonic spectrometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lim, Wei Ming (2010) Starfruit classification using support vector method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Yong Khin (2012) Cost control system for construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Yuh Taur (2010) Perlaksanaan sistem pengeluaran sijil siap dan pematuhan dari perspektif pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lim Seng Boon, Lim (2003) An alternative method for housing needs analysis-the use of Life Cycle Matrix (LCM). In: 1st APNR Conference on Housing and Sustainable Urban Development, 2003, Mandarin Oriental Hotel, Kuala Lumpur.

Lin Lin, Sim (2004) Microbial dehalogenation of halogenated alliphatic acid. In: Annual Fundamental Science Seminar UTM Skudai, 2004, n/a.

Ling, Jen Hua (2011) Behaviour of grouted splice connections in precast concrete walls subjected to tensile, shear and flexural loads. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Linggang , Didi Amarildo (2010) Monitoring temporal distribution of tropospheric aerosol over land area of Malaysia using NOAA AVHRR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Liow, Kim Heng (2003) Problems of strata title properties in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Lo, Po Kim (2010) Excretory overexpression for recombinant cyclodextrin glucanotransferase in Eschericha coli. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Loghmanian, Sayed Mohammad Reza (2010) Structure optimization of dynamic system model using multi - objective genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loh, Hueh Yong (2012) Strategi metakognitif pelajar dalam penyelesaian soalan Algoritma dan Konseptual Kimia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Loh, Ser Lee (2011) Characterizations and techniques for the transformation of connected graphs into single-row networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Loh, Wai Hoong (2011) Framework for sustainability assessment for construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Loi, Wei Sen (2010) Numerical simulations of forced nonlinear schrondinger equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Loke, Kok Foong (2012) Effect of applied load on the stability of unreinforced and reinforced slopes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lokman, Mohamad Rahziz (2012) Hubungan kepuasan kerja dengan motivasi guru Bimbingan dan Kaunseling Sekolah Menengah Kebangsaan dalam daerah Segamat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Low, Sheau Ting (2012) Factors affecting energy conservation behaviour of students in Malaysian universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Low, Zhi Wei (2010) Bimodal recognition based on thumbprint and thumb image using bayesian classfier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lu, Xiupeng (2004) Implementation of e-readers in a high sechool level English classroom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lukman, Nurlaili (2010) Pengukuran masa perjalanan dalam menentukan kesesuaian lokasi industri berdasarkan sistem maklumat geografi (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lusiani, Santy (2009) Economic impacts on local community "an analysis on dive tourism sectors' value chain" : a case study in Aur and Dayang Island, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

M

M. Abdullah, Aminatuzuhariah (2005) The extent of environmental management system implementation in the UK construction industry. In: Conf. on Sustainable Building South East Asia (SB04 Series), 2005, UTM, Skudai, Johor.

M. Benashur, Abir Mabruk (2011) Identification and characterization of fibrinolytic enzyme producing bacteria isolated from shrimp paste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

M. Dehaam, Qusai (2009) Language learning strategies employed by Arab speaking postgraduate learners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

M. Idris, Khairulnizam (2011) Real-time data acquisition and automated analysis procedure to support geodetic industrial deformation metrology. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate .

M. Khaleel, Dastan (2012) Comparative analysis of free flow and capacity restrained traffic assignments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M. Sarkawi, Fizwani (2009) Hubungan beban tugas dengan stres di kalangan guru bimbingan dan kaunseling negeri Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

M. Thamrin, Norashikin (2005) Structured basic compiler for Programmable Logic Controller (PLC). In: MiCE Exhibition 2005, 2005, UTM, Skudai, Johor.

Ma'alip, Halimah (2004) Relationship between academic achievements with personality characteristics in career choice and learning style. In: Association of Psycological and Educational Counsellors of Asia Pacific Biennial International Conference, 2004, n/a.

Ma'aram, Azaniwati (2003) Quality assessment of hollow prototypes model in fused deposit modeling. In: International Conference On CAD/CAM, Robotics and Factories of Future, 2003.

Maarof, Mohd. Azaini (2004) An iterative estimation of data window size for anomaly using self-similar feature in network traffic. In: Conference On Telemetics System, Service And Application , 2004, n/a.

Mad Hashim, Marina (2008) Kesediaan, sokongan dan pendekatan teknologi maklumat dan komunikasi dalam pengajaran dan pembelajaran oleh guru di peringkat prasekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mad Sani, Nur Diyana (2009) Tindakan pihak berwajib di dalam usaha menyediakan tempat tinggal pekerja asing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Madia, Pengeran (2003) Develop and construct an artificial cumulonimbus cloud ang high generation. In: International Conference on Advancement in Science and Technology , 2003, Kuala Lumpur.

Madlan, Munira (2010) Faktor - faktor bukan harga yang dipertimbangkan oleh bakal pembeli rumah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Madros, N. H. (2003) Lighting pollution of indoor environment: relation of light level and eye sympton occurrence. In: Seminar of JSPS-VCC, 2003, n/a.

Madros, Nor Haliza (2004) Fostering neighbourhood spirit through children significant role playground plays. In: National Conference On Affordable Quality Housing , 2004, Sarawak.

Maftoun, Parisa (2012) Efficient exopolysaccharaide production by pleurotus ostreatus in submerged culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Magaji, Nuraddeen (2010) Optimal location and control of flexible alternating current transmission system devices for oscillations damping. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Mahal, Yussof (2011) Practical planning model for port and harbour dredging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahamod Sarkoni, Sahidatul Fariza (2011) Simplified business continuity planning guideline for Universiti Teknologi Malaysia, center for information and communication technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahgoub, Elhadi Badawi (2007) Enhancemet and analysis of a hybrid liquid desiccant based-cooling system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mahidin, Norhidayani (2012) Human comfort using passive cooler radiator in bioclimatic house. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmood Sabry, Nor Hamni (2000) Hubungan di antara tahap pengetahuan pekerja terhadap akta kerja 1955 dengan komitmen pekerja terhadap organisasi di Kilang Kimberly Clark, Kluang, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mahmoudian, Shaya (2012) Regenerated cellulose/montmorillonite and graphene nanocomposites via ionic liquids. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Ahmad Fahmi (2011) Safe welding parameter for inner hull repair works on LNG carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Marhaini (1997) Analisis penggunaan peralatan penjimatan tenaga terhadap pengurusan beban elektrik di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mahmud, Mohd. Razali (2003) The benefit of GIS for the offshore engineering. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Mahmud, Mohd. Razali (2010) Competency of hydrographic services. Hydro International, 14 (5). ISSN 1385-4569

Mahmud, Mohd. Razali (2003) The development of marina database model in Langkawi. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Mahmud, Mohd. Razali (2003) The effect of offset data and attitude of a survey boat on the single hydrographic data. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Mahmud, Mohd. Razali (2003) Electronic chart : towards enhancing the safety of marine navigation. In: National Conference on Transportation Management, 2003, Selangor, Malaysia.

Mahmud, Mohd. Razali (2003) LADGPS and WADGPS : applications, working procedures and accura hydrographic surveying. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Mahmud, Mohd. Razali (2003) The need for precision in mapping the seabed. In: International Hydrographic & Oceangraphic Industry, 2003, Kuala Lumpur.

Mahmud, Mohd. Razali (2003) Present and future of education, training and prospect of hydro surveying in Malaysia. In: International Hydrographic & Oceangraphic Industry, 2003, Kuala Lumpur.

Mahmud, Mohd. Razali (2003) Solving uncertainty in the calibration of multibeam echo sounde system. In: International Symposium and Exhibition On Geoinformation , 2003, Shah Alam , Selangor.

Mahmud, Mohd. Razali (2003) Training and competency in hydrography. In: Offshore Surveying Awareness, 2003, Kuala Lumpur.

Mahmud, Mohd. Razali and Cham, Tau Chia (2006) Dissemination of chart information using web-based GIS. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 404 - 419. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Che Hasan, Rozaimi (2006) Free broadcast DGPS service for marine users: how good is it? In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 40 - 62. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Ghazali, Noorzalianee (2006) Development of marine digital database system for navigational aid in coastal areas. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 316 - 325. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Md. Said, Najhan (2006) Development of a calibration processing tools for a multibeam echo sounding system. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 128 - 142. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Md. Tarmizi, Nazirah and Abdul Jalil, Muhammad Ariff (2006) Development of a marina database model in Langkawi. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 377 - 390. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Mohd. Yusof, Othman (2006) Automatic filtering of far outliers in multibeam echosounding dataset using robust detection algorithms. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 199 - 213. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Mohd. Yusof, Othman (2006) Far and near outliers detection and elimination in multibeam echosounding data set. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 181 - 198. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Mohd. Yusof, Othman (2006) General workflow for outliers detection and removal in multibeam echo sounding data. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 165 - 180. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Purwanto, Hery (2006) Determination of tidal characteristics in Peninsular Malaysia using µ-taps software. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 246 - 258. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Purwanto, Hery (2006) Determination of tidal constituents and prediction based on short observation period. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 231 - 245. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Salleh, Che Senu (2006) Effect of offset and attitude of a survey boat on the single beam hydrographic data. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 86 - 102. ISBN 978-983-52-0581-1

Mahmud, Mohd. Razali and Tengku Ali, Tengku Afrizal (2006) Development of safe navigation system for tidal restriction area. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 271 - 288. ISBN 978-983-52-0581-1

Mai, Muhammad Yahya (2009) Strategising facilities management to meet international students requirement in UTM, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Maidin, Nur Shidah (2011) The application of Selva's and Sakinas's cases in the context of LAD to the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mak, Sew Yin (2009) The impact of using multimedia course-ware on chemistry achievement of students with different learning styles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Malakan, Rohaidah (1997) Hubungan gaya kepimpinan dalam iklim organisasi : satu kajian kes di E.P.E. Swichtgear Corporation Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Malekian, Reza (2012) Enhanced resource reservation based on cross layer design over mobile internet protocol version 6 networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Malik, Reza Firsandaya (2011) Routing optimization scheme in wireless MESH network using particle swarm optimization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mamat, Azlida (2012) Herbal research e-centre (HREC) for Malaysian herbs researchers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mamat, Hanafi (2003) Housing affordability and price mechanism in Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mamat, Mohd. Fauzi (2011) Corrosion behavior of low carbon steel welded joint in 3.5% sodium chloride (NaC1) solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mamat, Nor Sasha Izana (2012) Silver inhibition on recombinant flavin reductase from Citrobacter freundii A1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mamat, Nuzulla (2009) Teacher professional development : ICT practices and constraints among English as a second language (ESL) teachers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mamickam, Khesavarthini (2010) The learning styles and achievement of students in science using visual, auditory and kinesthetic (VAK) modality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mamzaei, Shahryar (2011) Geostatistical approach in determining appropriate cell size for slope length (LS) factor in soil erosion modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Man, Mustafa (2012) Model integrasi pelbagai jenis pangkalan data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Manaf, Noor Zakiah (2009) Hubungan antar tret personaliti dengan tahap stres dalam kalangan pelajar sarjana pendidikan separuh masa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Manap, Rafidah (2009) Persepsi guru kelas tingkatan satu terhadap kemenjadian murid lepasan UPSR di daerah Pontian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Manap, Roslan (2010) Pengurusan skim strata kediaman dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mandala, Satria (2004) Active web caching management. In: Seminar Nasional Informatika , 2004, Indonesia.

Manoharan, Lovely Shamini (2012) Variations of palmprint patterns amongst Johore residents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mansir , Dodo (2010) Sick building syndrome in a university library. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mansor, Ahmad Fairuz (2011) Performance evaluation of wire electrical discharge machining (WEDM) on inconel 718 using response surface methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Kamarun Hizam (2002) Perumusan kaedah RK3AM serta penganggaran ralat dalam penyelesaian masalah nilai awal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mansor, Masalinda (2011) Kajian terhadap kepentingan mewujudkan meja bantuan di institusi pengajian tinggi awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mansor, Norhudayati (2009) Penilaian pelajar terhadap kaunselor dan Program Perkhidmatan Bimbingan dan Kaunseling di tiga buah sekolah daerah Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mansourizadeh, Amir (2010) Development of hollow fiber membranes for carbon dioxide absorption in gas-liquid membrane contactors. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Mar Iman, Abdul Hamid (2005) Implikasi pencemaran alam sekitar terhadap nilai harta tanah kediaman. In: First Real Estate Educators and Researchers Malaysia (REER) Seminar, 2005, UTM City Campus.

Mar Iman, Abdul Hamid (2004) Using GIS-MRA generated local errors of prediction surface location influence in the prediction of residential. In: International Real Estate Research symposium, 2004, n/a.

Marakan, Nadia Ahamad (2011) Treatment of domestic wastewater using constructed wetland and magnetic field. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Marghany, Maged Mahmoud and Hashim, Mazlan (2006) RADARSAT-1 SAR for mapping of coastal water front. In: Marine Technology 2006 , 2006, Indonesia.

Marghany, Maged Mahmoud and Wan Kadir , Wan Hazli and Hashim, Mazlan (2006) Coastal zone vegetation mapping using clustering technique of POLSAR data. In: PACRIM AIRSAR Symposium, MACRES,, 2006, Kuala Lumpur.

Marghany, Maged Mahmoud (2010) 3-D visualizations of coastal bathymetry by utilization of airborne TOPSAR polarized data. International Journal of Digital Earth, 3 (2). 187 - 206.

Marghany, Maged Mahmoud and Hashim, Mazlan (2010) A box-jenkins algorithm for retrieving sea surface salinity from modis satellite data. In: MRSS 6th International Remote Sending & Gis Conference and Exhibiton (MRSS 2010), 28-29 April 2010, PWTC, Kuala Lumpur.

Marghany, Maged Mahmoud and Hashim, Mazlan (2010) Utilization of radar interferometry to three dimensional coastlines deformation. In: MRSS 6th International Remote Sending & Gis Conference and Exhibiton (MRSS 2010), 28-29 April 2010, PWTC, Kuala Lumpur.

Marghany, Maged Mahmoud and Hashim, Mazlan and Ahmad, Mohd. Rizaludin and Anuar, Mohd. Hafiz (2010) Utilization of LIDAR and IKONOS satelite data for security hotspot analysis based on realism of 3D city model. In: The 2010 International Conference on Computational Science and Applications (ICCSA 2010), 23-26 Mac 2010, Fukuoka, Jepun.

Marghany, Maged Mahmoud and Hashim, Mazlan and Cracknell, Arthur P. (2010) Modeling sea surface salinity from modis satelite data. In: The 2010 International Conference on Computational Science and Applications (ICCSA 2010), March 23-26, 2010, University Kyushu Sangyo, Fukuoka, Japan.

Marni, Nurazmallail (2004) Carian hadis berasakan web: ke arah maklumat hadis di hujung jari. In: Seminar E-Pembelajaran Kebangsaan, 2004, n/a.

Marni, Nurazmallail (2004) Pendidikan sifat bekerja dalam kumpulan (teamworking) sebagai atribut utama graduan IPT: huraiannya menurut perpektif Islam. In: Seminar Pembanggunan Kerjaya Abad 21 , 2004, n/a.

Marto, Aminaton (2004) Bearing capacity of soft soil overlaid by granular material with bamboo at the interface. In: Malaysian science And Technology Congress selangor, 2004, n/a.

Marto, Aminaton (2003) Some correlations of engineering characteristics of residual soi design purposes. In: Asia Pacific Structural Engineering and Construction Conference, 2003, Johor Bahru, Malaysia.

Marzuki , Muhammad Akmal (2010) Determination of shoreline rate of changes using ikonos data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mashudin, Mirdawati (2012) Production of high bromelain pineapple (ananas comosus) juice by membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masiron, Asrul Azamin (2009) Hubungan antara personaliti dan penghargaan kendiri dalam kalangan pelajar cemerlang akademik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Maslan, Mohd. Nazmin (2012) Modelling and identification of piezoelectric actuators using system identification technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masood, Ibrahim (2012) A scheme for balanced monitoring and accurate diagnosis of bivariate process mean shifts. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Masrom, Maslin (2008) Computer ethnics awareness among undergraduate students in Malaysian Higher Education Institutions. In: 19th Australian Conference on Information Systems , 2008, Cristchurch , New Zealand .

Masrom, Maslin (2008) Computer security and computer ethics awareness: a compenant of management information system. In: ITSIM International Symposium On Information Technology 2008 , 2008, UKM.

Mat, Adam (2002) Tahap kepentingan kemahiran bukan teknikal graduan kejuruteraan : satu kajian terhadap graduan L&G-twintech institute of technology dan majikan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mat, Kamisan (2008) Tahap kepuasan pelanggan dari aspek audit ruang dan fasiliti fizik dalaman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mat, Nariza (2010) Tahap kepuasan pelajar terhadap pengurusan asrama di Kolej 9 Universiti Teknologi Malaysia Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mat, Ramli (2008) Catalytic studies of boron hzsm-5 zeolite for methane conversion to higher hydrocarbons. Journal of Chemical and Natural Resources Engineering - Sustainable Process for Natural Resources, 2 (Sp Ed.). 146 - 152. ISSN 1823-5255

Mat, Shabudin (2004) Design, fabricate and the testing of the pressure measurement missile. In: Proceedings of the National Aerospace Conference Universiti Sains Malaysia, 2004, Pulau Pinang.

Mat Dawi, Norazryana (2010) The relationship between organizational cultural factors and knowledge management : a case study at SAJ Holdings Sdn. Bhd. Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mat Hanafiah, Mohd. Ariff (2000) The perception of the lecturers, instructors, and the students toward the effectiveness of teaching performed in the Automated System Maintenance Technonolgy (ASMT) course in Malaysia France Institute (MFI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mat Isa, Norhafiza (2010) Persepsi kontraktor terhadap sistem binaan berindustri (IBS) kes kajian : kontraktor Negeri Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Isa, Siti Salehah (2010) Pandangan orang awam terhadap tahap profesional agen harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Lazim, Tholudin (2003) A CFD and experimental study on wing-external store aerodynamic interference of a subsonic fighter aircraft. In: International Conference on Advanced Engineering Design, 2003.

Mat Nah, Muhammad Sayuti (2011) Co-digestion of palm oil mill effluent (pome) with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Noor, Noorsidi Aizuddin (2009) Optimal life cycle costing in determinig floors materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mat Nor, Nor Syarizan (2011) Microwave induced fast pyrolysis of scrap tires. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Nor@Zakaria, Nor Ezwani (2011) Homotopy continuation method in avoiding the problem of divergence of traditional newton's method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat Radzi, Mohd. Fadzilah (2009) Kesan e-pembelajaran terhadap kefahaman konsep statistik pelajar sekolah menengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mat Said, Dalila (2012) An accurate estimation of power system harmonic impacts on transformer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Salleh, Maznida Shahila (2011) Kesedaran penyelengaraan fasiliti elektrik di sektor awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Salleh, Nurfazilah (2012) Effect of overheating of bitumen on hot mix asphalt properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Tahir, Zarani (2003) Effect of processing parameter on antioxidant activity of essen oils from zingiberacea family. In: International Conference on Chemical and Bioprocess Engineering, 2003, UMS, Kota Kinabalu, Sabah.

Mataram, Agung (2012) Synthesis, characterization and optimization of polyacrylonitrile electrospun nanofiber membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Matsuura, T. and Feng, C. and Khulbe, K. C. and Rana, D. and Singh, G. and Gopal, R. (2010) Development of novel membranes based on electro-spun nanofibers and their application in liquid filtration, membrane distillation and membrane adsorption. n/a . pp. 9-14.

Maulina Dwi Sari, Maulina Dwi Sari (2010) English language skills for school leaver employees in manufacturing industry in Batam : a targed situation analysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mavalizadeh, Seyedmehdi (2011) Finite element simulation of composite materials based on carbon nano tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mayahi, Alireza (2012) Temperature effect on sulfonatedpoly(etheretherketone)with charged surface modifying macromolecule for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Maziar, Reza (2012) Ejector refrigeration cycle for automotive air conditioning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mazlan, Mastura (2008) Tahap kesediaan jawatankuasa pengurusan bersama dalam pengurusan dan pentadbiran badan pengurusan bersama di bawah akta bangunan dan harta bersama (penyenggaraan dan pengurusan ) 2008. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mazlan, Muhammad Afiq (2012) Biodegradation of used cooking oil by indigenous bacteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mazlan, Muhammad Shahrom (2012) The construction labor shortage in Johore Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mazlan, Saiful Amri (2008) Apparent stress-strain relationships in experimentalequipment where magnetorheological fluids operate undercompression mode. In: School Of Mechanical and Manufacturing Engineering, 2008, Dublin City University, Glasnevin.

Mazlan, Saiful Amri (2008) A comparative magnetic simulation study between ANSYS and FEMM for the implementation of magnetostrictive material terfenol-D in CNG fuel injection actuation. In: The European Magnetic Symposia (JEMS), 2008, Dublin City University, Glasnevin.

Mazlan, Saiful Amri (2008) An investigation of the behavior of magnetorheological fluids in compression mode. In: School Of Mechanical and Manufacturing Engineering, 2008, Dublin City University, Glasnevin.

Mazlan, Saiful Amri (2008) Magentic circuit design for the squeeze mode experiments on magnetorheological fluids. In: School Of Mechanical and Manufacturing Engineering, 2008, Dublin City University, Glasnevin.

Mazlan , Saiful Amri and Olabi, Abdul Ghani and Ismail, Izwan (2010) Magnetic circuit simulation for magnetorheological (MR) fluids testing rig in squeeze mode. Advanced Materials Research, 123125 . 991 - 994. ISSN 1662-8985

Ma’ruf, Farid (2010) Simple pressure and density dependent constitutive model for sands. Australian Geomechanics .

Md Napis, Ishak (2009) Pengurusan dan mekanisma pemindahan bahan batu di negeri Perak Darul Ridzuan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Md. Adnan, Nurul Huda (2008) Fish habitat assessment for river rehabilitation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Amin, Kamarudin (2009) Kesediaan guru pelatih IPGM kampus Temenggong Ibrahim dalam menjalani latihan praktikum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Amin, Noraliah Aziziah (2011) Physical-based modeling of carrier mobility in graphene nanoribbon field effect transistor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Amin, Zainal Abidin (2009) Temerloh ke arah Bandar Lestari. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Md. Ayob, Shahrin (2010) A new optimum design for a single input fuzzy controller applied to DC to AC converters. Journal of Power Electronics, 10 (3). 306 - 312.

Md. Ayob, Shahrin (2010) A simple and fast PI-fuzzy controller for PWM DC/AC converters. Control and Intelligent Systems, 38 (3). 148 - 155.

Md. Azmi , Fatin Afiqah (2010) Strategi agensi kerajaan untuk memenuhi kuota bumiputera dalam projek perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Daud, Mohd. Yusof (2008) Finite element modelling of radial utrasonic compression of aluminium. In: Malaysian Sciene And Technology Congress 2008 ( MSTC) 2008 , 2008, Kuala Lumpur.

Md. Daud, Rafizah (2010) The relationship between government support and performance of herbal small and medium enterprises in Johor and Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Md. Din, Mohd. Fadhil (2004) Effect on significant COD/N ratio to poly-B-production as a common of biodegradable plastic material fed-batch mixed culture. In: Seminar Penyelidikan Kejuruteraan Awam , 2004, skudai.

Md. Din, Mohd. Fadhil (2007) Polyhydroxyalkanoates production from palm oil mill effluent using mixed microbial culture. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Awam.

Md. Din, Mohd. Fadhil and Ujang, Zaini and Muhd. Yunus, S. and Van Loosdrecht, M. C. M. (2006) Storage of Polyhydroxyalkanoates (PHA) in fed batch mixed cultures using Palm Oil Mill Effluent (POME). In: Proceedings Of The 4th Seminar On Water And Waste Management And Technologies, 2006, Johor.

Md. Din, Norashidah (2003) Development of a scheduler for quality of service support in IP networks. In: SCOReD, 2003, Selangor.

Md. Din , Ami Hassan (2010) Sea level rise estimation using satelite altimetry technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Hasnan, Syamzurina (2009) Neuro-fuzzy based power system stabilizer of a multi-machine system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Husin, Nurhafiza (2009) Pembinaan dan penilaian instrumen untuk menilai persekitaran e-pembelajaran berdasarkan perspektif pakar, pensyarah dan pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Illias, Rosli (2003) Production of Cyclodextrin Glucanotransferasa (CGTase) from bac. stearothermophilus hr1 in shake flasks. In: International Conference on Chemical and Bioprocess engineering, 2003, UMS, Kota Kinabalu, Sabah.

Md. Khair, Nurhayati (2010) Faktor - faktor fizikal dalam penempatan baru (kajian kes : PPR Taman Kempas Permai). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Khalid, Zurainah (2009) Masalah disiplin dan kaitannya dengan penghargaan kendiri dan keagamaan pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Khudzari, Ahmad Zahran (2010) CIMS balloon pump. International Journal of Artificial Organs, 33 (7). 473 - 473.

Md. Khudzari, Jauharah (2010) Determination of heavy metals in hair of sanitation workers using the method of EDXRF. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Malia, Norazima (2010) Kesan latihan kecerdasan emosi dalam kalangan pekerja awam khas Pejabat Hutan Daerah Bentong, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Md. Ngadiran, Nuraliyah Sallehah (2010) The shapley value for carbon allocation problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Ngadiran, Nurizah (2009) A comparison between Malay and American responses to compliments in English. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Ninggal, Mohd. Tajudin (2003) Darjah keserasian personaliti-persekitaran (kongruen) bidang ke pendidikan di Malaysia. In: Seminar Kebangsaan Pascasiswazah UMS, 2003, UMS, Sabah.

Md. Noor, Norhazilan (2003) The simulation-based prediction of pipeline inspection data emp the extreme value theory. In: Asia Pacific Structural Engineering and Construction Conference (APSEC), 2003, Johor Bahru, Malaysia.

Md. Nor, Khalil (2008) An exploratory study into the adoption of internet banking in a developing country: malaysia. Journal of Internet Commerce, 7 (1). 29 - 73 . ISSN 1533-2861

Md. Nor, Md. Amin (2000) Perceptions of the air conditioning and refrigeration technology graduates towards the training program at Malaysia France Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Omar, Md. Omar (2004) Kajian masalah pembahagian harta pusaka kecil dari perspektif organisasi dan prosedur kerja : kes kajian : negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Md. Palil, Md. Dan (2003) Parafin wax application for product modelling. In: Conference In Conjunction with the Public Institution of Higher Learning R & D Exposition, 2003, PWTC, Kuala Lumpur.

Md. Rasid, Madihah (2012) Intentional islanding operation strategy via power mismatch method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Reba, Mohd. Nadzri (2006) A straightforward signal-to-noise ratio estimator for elastic/Raman lidar signals. In: SPIE 12th International Symposium on Remote Sensing (Conference on Remote Sensing of Clouds), 2006, Sweden.

Md. Rofaii, Nursyamimi (2010) Kajian kemungkinan ke atas pembangunan tanah wakaf kes kajian : Menara Wakaf, Jalan Perak, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Saaim, Emrul Hamide (2004) Design of the intelligent agent for speech recognition based application. In: International Conference on Computer Graphic and Multimedia , 2004, n/a.

Md. Sahir, Yusoff (2000) The perception of trainees on the interpersonal relation of technical training officers of the Industrial Electronics Department in the German Malaysian Institute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Said, Najhan (2003) Test studies in solving uncertainty result on patch test calibration. In: International Hydrographic & Oceangraphic Industry, 2003, Kuala Lumpur.

Md. Salleh, Mohd. Syafiq (2012) Pengamalan gaya pembelajaran model DUNN and DUNN dan model Joy Reid oleh pelajar asrama dan luar asrama di sebuah sekolah harian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Sheriff, Noor Azam (2003) 3D virtual GIS architecture. In: Advance Technology Congress , 2003, Serdang, Selangor.

Md. Tahir, Mahmood (2003) Economic aspects of composite steel beam in the design of multi braces steel frames. In: Asia Pacific Structural Engineering and Construction Conference, 2003, Johor Bahru, Malaysia.

Md. Tahir, Mahmood (2004) Economic comparison between S275 and S355 steel grade of multi-storey braced steel frame using partial strength. In: Australian Conference On The Mechanics Of Structure And Material, 2004, n/a.

Md. Taib, Abdullah (2008) Pelaksanaan kursus peningkatan pengetahuan dan kemahiran di kalangan guru-guru reka cipta sekolah menengah di Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Tajuddin, Rose Sabrina (2012) Ant colony and particle swarm optimization for feature selection in intrusion detection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Wahed, Md. Najib (2009) Pandangan pengguna terhadap perkhidmatan fasiliti di taman rekreasi awam serta penambahbaikan perkhidmatan melalui kaedah penyumberan luar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Md. Yassin, Abu Azam (2008) Formation damage using palm oil ester based drilling fluid. Journal of Chemical and Natural Resources Engineering - Safer and Cleaner Technology, 2 (Sp Ed.). 92 - 100. ISSN 1823-5255

Md. Yunus, Md. Hasbi (2009) Kajian kategori masalah di kalangan pelajar tahun satu yang tinggal di Kolej Jaya dan Kolej Semarak Universiti Teknologi Malaysia, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Yunus, Mohd. Amri (2004) Optical tomography system using infra red sensor. In: International Conference On Electronic Material And packaging , 2004, n/a.

Md. Yusof, Fahmi Asyadi (2011) Mechanical, thermal and morphological properties of MICA filled polycarbonate/acrylonitrile butadiene styrene blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Yusof, Masdinah Alauyah (2003) The SAELL programme : an alternative english language learning. In: English for Business & Technology Conference E4BT International Darussalam, 2003, Brunei Darussalam.

Md. Yusof, Masdinah Alauyah (2004) Students' peer assessment : improving teaching approach. In: MELTA National Conference on Oracy, 2004, Kota Kinabalu, Sabah.

Md. Yusof, Muhamad Ridha (2009) Pemindahan latihan pengurusan kualiti 5S dan hubungannya dengan kepuasan kerja : kajian di ibupejabat FELCRA Berhad Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Md. Zahari, Azura (2009) Salah laku seksual dalam kalangan remaja sekolah-sekolah menengah daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Zain, Mohd. Zarhamdy (2010) Development of piezoelectric braille cell control system using microcontroller unit (MCU). Wseas Transactions on Circuits and Systems, 9 (6). 379 - 388.

Md. Zain, Mohd. Zarhamdy (2010) Dynamic analysis on noise and vibration study of flexible wiper blade system. Advanced Materials Research, 97101 . 4530 - 4536.

Md. Zain, Zainol Alam (2010) Determination of transformer performance index based on dissolved gas analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Zin, Hayati (2012) Structural condition assessment of reinforced concrete jetty structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Zuki, Mohd. Faridz Sunaidi (2012) Hubungan antara motivasi kerja dengan kepuasan kerja dalam kalangan guru tingkatan enam Sekolah Menengah Zon Bandar Segamat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Medugu, Idris Nasiru (2010) An assessment of afforestation programme towards combating desertifi cation in Kano and Jigawa states Negeria. PhD thesis, Universiti Teknologi Malaysia, Fakulti Alam Bina.

Megat Abdullah, Aminatuzuhariah (2004) Designing for 'green' building in hot and humid climate. In: 5th Int. Seminar on Sustainable Environmental Architecture , 2004, n/a.

Megat Abdullah, Aminatuzuhariah (2003) Thermal comfort level of double storey terrace houses with and without air-well. In: APHR Conference on Housing and Sustainable Urban Development, 2003, Mandarin Oriental, Kuala Lumpur.

Megat Abdullah, Aminatuzuhariah (2004) The use of value management system to mitigate problems in construction industry. In: MICRA 3rd Annual Conference and General Meeting, 2004, n/a.

Mehrabbegi, Sajad (2011) Lean supply chain management and its effects in automotive industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mehrabi, Nima (2012) Effect of human motion induced vibration loading on footbridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mehrdad Ghaemi, Seyed (2012) Determine the impact of road humps on travel time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Memari, Ashkan (2012) Performance evaluation of distribution network in a supply chain using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Memon, Zubair Ahmed (2007) Automated construction project progress monitoring system. PhD thesis, Universiti Teknologi Malaysia.

Meng Hee, Lim (2003) Field experiences of blade faults diagnosis in power generation turbines. In: Asia Pacific Vibration Conference 2003, 2003, Gold Coast, Australia.

Menhaj, Maryam (2012) Acculturactive stress among Iranian students in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mentaza Khan, Puteri Ameera (2010) Hubungan sosial dalam penyumberan luar (kajian kes : Pejabat Harta Bina, UTM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Meor Adam, Arfah Hanum (2009) Architect's continuing duty to review design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mhd. Nasir, Nurul Afiza (2012) Slope stability analysis due to tree induced suction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Min Keen, Tang (2004) BER performance simulation in los environment for fixed broadband wireless access in NLOS environment. In: International Symposium on Wireless Personal Multimedia Communication, 2004, n/a.

Min Keen, Tang (2004) BER performance simulation in LOS environment for fixed broadband wireless access system. In: International Conference on E-Business and Telecommunication Ne, 2004, Setubal, Portugal.

Min Keen, Tang (2004) Channel modelling at 5.8ghz for fixed wireless access. In: IFIP Internatioanl Conference on Wireless and Optical Communication Network, 2004, n/a.

Minouei, Amin (2012) Identifying clusters of information seeking behaviors in PSZ search engines based on url classification by using web usage mining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mior Shahidin, Shazatul Nadia (2011) Improving on-site construction safety. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mirbadin, Anoush (2011) Performance analysis of DCO OFDM and DCO WOFDM systems in MMF optical links. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mirbirjandian, Ehsan (2011) A simulation study on kanban control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirjalili, Seyedali (2011) Hybrid particle swarm optimization and gravitational search algorithm for multilayer perceptron learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mirzaei, Fatemeh (2012) The comparison of the effect of bilingual instruction and the use of second language on students' learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mislan, Elleyanti (2012) Kemahiran pengutaraan masalah Matematik Tambahan dalam kalangan pelajar tingkatan 4. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mislan, Nora (2010) A case study of teacher-parent collaboration in individualized education plan implementation for special education. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Misman, Muhammad Faiz (2012) A hybrid of support vector machines and smoothly clipped absolute deviation for identification of significant genes and biological pathways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misnan, Mohamad Fairdaus (2009) A study on readiness and implementation of e-training for UTM academic staff. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Misnan, Mohd. Saidin (2004) Program pendidikan dan pembangunan sumber manusia dalam industri pembinaan - kajian program latihan kemahiran dalam menyediakan tenaga kerja mahir tempatan. In: Conference on Engineering Education (CEE 2004), 2004, Kuala Lumpur.

Misnan, Mohd. Saidin and Mohamed, Abdul Hakim and Kadikon, Sulaiman and Mohd. Yusof, Zakaria and Wan Mahmood, Wan Yusoff and Bakri, Ahmadon (2006) Pembangunan budaya keselamatan dalam industri pembinaan. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Misnan, Mohd. Saidin and Mohamed, Abdul Hakim and Mohd. Yusof, Zakaria and Wan Mahmood, Wan Yusoff and Abdul Hamid, Razali and Othman, Norazam (2006) Isu-isu semasa pengurusan keselamatan & kesihatan pekerjaan dalam industri pembinaan Malaysia. In: International Conference on Construction Industry 2006, 2006, Universitas Bung Hatta, Indonesia.

Misran, Effaliza (2012) Polyvinyl alcohol-alginate ferro photo gels for photocatalytic reduction of chromium (VI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mo Dabouba, Yousaf Hassin (2009) An investigation on reading comprehension strategies among Arab English language learners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Moazeni, Nima (2011) A study of nano zinc powder filled epoxy resin/polypyrrole for anti corrosion coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Moghadam, Nima Samareh (2010) Reactions and nature of feedback in online story writing (storytube). Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Moghaddam, Siavash Ghodsi (2011) Density-based hybrid recommender system combining demographic methods and collaborative filtering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Moh. Khairudin, Moh. Khairudin (2012) Linear matrix inequality based robust control of a two-link flexible manipulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad, Ahmad Kamely (2008) Performance of cubic boron nitride and mixed ceramics tools when hard turning tool steel. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohamad, Dzulkifli (2008) Line and skew removal from Off-Line cursive handwritten words. Gomal University Journal of Research, 24 (2). 28 - 33. ISSN 1019-8180

Mohamad, Hadzmadi (2011) Maintenance management in Malaysian National Service Training Program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad, Hisham (2010) Behaviour of an old masonry tunnel due to tunnelling-induced ground settlement. Geotechnique, 60 (12). 927 - 938.

Mohamad, Khairul Anuar (2010) An evaluation of statistical model for downscaling precipitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Khairul Azmi and Othman, Nooraini (2009) Minda hadhari dalam mencapai matlamat islam hadhari. In: Ke Arah Umat Hadhari. Yayasan Ilmuwan, Kuala Lumpur, Malaysia, pp. 5-34. ISBN 978-983-44372-1-3

Mohamad, Mohamad Ibrahim (2003) Reviewing the potential of applying lean production principles malaysian construction community. In: Asia Pacific Structural Engineering and Construction Conference (APSEC), 2003, Johor Bahru, Malaysia.

Mohamad, Mohd. Saberi (2010) A three-stage method to select informative genes for cancer classification. International Journal of Innovative Computing Information and Control, 6 (1). 117 - 125.

Mohamad, Mohd. Saberi and Zainal, Anazida and Deris, Safa'ai (2009) An improved binary particle swarm optimisation for gene selection in classifying cancer classes. In: Distributed Computing, Artificial Intelligence, Bioinformatics, Soft Computing and Ambient Assisted Living. Springer, Berlin/ Heidelberg, pp. 495-502. ISBN 978-3-642-02481-8

Mohamad, Mohd. Sham (2012) Compatibility conditions and nonabelian tensor products of finite cyclic groups of p-power order. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad, Nazatul Shima (2004) Faktor-faktor yang mempengaruhi keberkesanan pelaksanaan job management system (JMS) di SAJ Holdings Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohamad, Nor Azhariah (2011) The mathematical model of El Nino and the Southern Oscillation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad, Nor Azimah (2012) Determination of road safety index for Malaysia road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Ra'alah (2005) Keserasian bahasa senibina masjid abad ke-18 melaka dengan masjid-masjid tradisional di Jawa. In: Int. Seminar Malay Architecture as Lingua France, 2005, Trisakti University Jakarta, Indonesia.

Mohamad, Roslan (2009) Amalan pengajaran sains dan pengaruhnya terhadap integrasi pelajar berbilang kaum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad, Rosli (2008) Hubungan lokus kawalan dengan tahap stres di kalangan warga kerja Pejabat-pejabat Pelajaran Daerah Negeri Johor : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad, Siti Nur Hidayah (2011) Bacterial cellulose membrane coated with pyrroline for hexavalent chromium removal in wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Mohamad , Mohd. Khairolfizal (2010) Pembangunan ekopelancongan di Tasik Bera dan kesannya kepada orang asli Semelai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad @ Aziz, Siti Khatizah (2009) Hubungan penglibatan ibu bapa dengan pencapaian akademik, kegiatan kokurikulum dan disiplin pelajar di empat buah sekolah menengah di daerah Kulaijaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad Amin, Salmiah (2010) An exploratory study on the Malaysian Human Resource professionals in the manufacturing sector. International Journal of Business and Society, 11 (1). 89 - 105.

Mohamad Hamin, Shukri (2009) Kerumitan pengeluaran sijil kelayakan menduduki (SKM) kajian kes : Taman Desa Gemilang, Sg. Pusu Daerah Gombak, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamad Havez, Nadia Fitri (2010) A web-based database system for NOAA AVHRR data from FKSG receiver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad Kamal, Mohamad Ridzuan (2012) The effect of rolling temperature on the properties of biodegradable MG-0.7CA alloy for implant application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Noh, Afnizawati (2004) Architecture of web based graphics application using java RM1. In: National Conference on Computer Graphics & Multimedia, 2004, n/a.

Mohamad Nor, Faizah (2004) Content knowledge : its influence on the use of reading strategies. In: Asia Call International Conference, 2004, n/a.

Mohamad Nor Said, (2006) Pemodelan jaringan bagi aplikasi GIS untuk bekalan air. In: Inovasi Dalam Sistem Maklumat Geografi (GIS) 1. FKSG, UTM, Johor , 49 - 74. ISBN 978-983-52-0583-5

Mohamad Nor Said, (2006) Pengaturcaraan komputer bagi penukaran kordinit WGS84 ke kordinit tempatan menggunakan ’avenue script’. In: Inovasi Dalam Sistem Maklumat Geografi (GIS) 1. FKSG, UTM, Johor , 125 - 142. ISBN 978-983-52-0583-5

Mohamad Nor Said, (2006) Pengintergrasian GIS dan mike 11 nam dalam permodelan hidrologi dan pengiraan isipadu air empangan hidroelektrik. In: Inovasi Dalam Sistem Maklumat Geografi (GIS) 1. FKSG, UTM, Johor , 1 - 22. ISBN 978-983-52-0583-5

Mohamad Ramly, Zuhaili (2009) Rescission, variation and waiver of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Rasdi, Mohamad Tajuddin (2004) Architecture education and community forces: extending the measyred drawing pedagogy. In: 2nd Architecture Education Forum, 2004, n/a.

Mohamad Razali, Shahrul Nizam (2003) IT support for design, modeing, and simulation of fuel cell powered motorcycled. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Mohamad Sahar, Amirah (2010) Effect of viscous dissipation on the mixed convection heat transfer from an exponentially stretching surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Said, Khairul Anwar (2012) Characterization of adding 2,4,6-triaminopyrimidine as additive in silver impregnated of hollow fiber and flat sheet membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resource Engineering.

Mohamad Saleh, Rahim (2009) Penyimpanan database berdigit bagi pemulihan bangunan warisan melalui kaedah terrestrial laser scanning (TLS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamad Salim, Maheza Irna (2012) Hybrid magnetoacoustic method for breast cancer detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biomedical Engineering and Health Science.

Mohamad Sharif, Johan (2012) Iconic representation techniques for ion dynamics in glass structures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Yusak , Yuswirda (2010) Pemetaan indeks prioriti lembangan sungai menggunakan data remote sensing dan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamad Yusoff, Izham (2010) Influence of geo-referencing in three-dimensional geographic inforamation system applying for dynamic rainfall-runoff modelling. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Mohamad Yusop, Muhamad Amiruddin (2010) Circular polarization microstrip antennas using single fed em coupled ring resonators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Zin, Rosli (2003) Design constructability assesstment : a neural network based applied. In: Asia Pacific Structural Engineering and Construction Conference (APSEC), 2003, Johor Bahru, Malaysia.

Mohamad Zin @ Jin, Mohd. Zazali (2009) Perlaksanaan rekabentuk pengajaran di kalangan guru di sekolah menengah daerah Kulai Jaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamaed Ariff, Mohd. Hatta (2008) Evolution and assessment of transformer failure on 132 KV substation. In: 2nd IEEE International Power And Energy Conference PECon 08) , 2008, Johor Bahru, Johor.

Mohamed, Ahmad Kilani (2005) Etika guru pendidikan Islam. In: Muzakarah Pembangunan Mahasiswa, 2005, Kedah darul Aman.

Mohamed, Ahmad Kilani (2003) Garis pemisah antara iman & kufur (huraian mengenai bahaya ajaran sesat). In: Program Penghayatan Islam anjuran Kelab Iqra' UTM, 2003, Dewan Serbaguna Kolej Meranti, UTM.

Mohamed, Ahmad Kilani (2006) Kecelaan sifat al-shuh (bakhil). In: Kolokium Ilmu, 2006, Pejabat JIM.

Mohamed, Ahmad Kilani (2005) Kepentingan pengamalan sifat amanah dalam kehidupan harian: huraiannya menurut perspektif Islam. In: Seminar Membangun Dengan Nilai-Nilai Murni, 2005, FP UM.

Mohamed, Ahmad Kilani (2005) Keutamaan amalan zikir dan doa dalam kehidupan mahasiswa dan mahasiswi muslim. In: Muzakarah Pembangunan Mahasiswa, 2005, Kedah darul Aman.

Mohamed, Ahmad Kilani (2004) Memberitahu hal yang sebenar kepada kanak-kanak kecil : huraian menurut perspektif islam. In: Simposium Kebangsaan Kanak-kanak Menurut Perspektif Islam, 2004, Pulau Pinang.

Mohamed, Ahmad Kilani (2003) Nilai hidup sederhana menurut praktis tasawuf & kepentingannya dalam kehidupan muslim. In: Seminar Tasawuf Peringkat Kebangsaan 2003, 2003, Allson Klana Resort, Negeri Sembilan Darul Khusus.

Mohamed, Ahmad Kilani (2004) Pelaksanaan sifat amanah menurut perspektif Islam. In: Program Latihan Khidmat Negara, 2004, Kolej Tun Hussein Onn, UTM.

Mohamed, Ahmad Kilani (2003) Permasalahan pengajaran nahu bahasa arab kepada pelajar Sarjana Muda Sains serta Pendidikan (Pengajian Islam) Universiti Teknologi Malaysia dan penyelesaiannya. In: International Seminar on LSP in Practice, 2003, Hotel Eden Garden, Johor Bahru.

Mohamed, Ahmad Kilani and Safar, Ajmain and Mohd. Noor, Sulaiman Shakib (2006) Etika guru pendidikan Islam. In: Muzakarah Pembangunan Mahasiswa, 2006, Hotel Helang Langkawi.

Mohamed, Azhar (2012) Numerical investigation of thermal fluid flow through porous media from a differentially heated concentric annulus cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Basat A. (2011) Generation of realistic 3D model of buildings and surface in arcsene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohamed, Faiq (2011) Microstructural influence on the corrosion behavior of dual phase steels in water and 3.5% sodium chloride solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Farhan (2004) Smart web caching with structured neural network. In: International Conference on Computer Graphic and Multimedia , 2004, n/a.

Mohamed, Maketab (2003) Urban river rehabilition - Sg Tebrau and Sg Sengget, Johor. In: Environment Conference, 2003, Pulau Pinang.

Mohamed, Mohd. Nazri (2010) Simulation and experimental study of vibration control using smart material for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Nordiyana (2010) Kaedah penilaian laluan saluran paip gas bagi maksud kadaran di Majlis Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed, Norhidayah (2012) The effect of aggregate temperature on HMA properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Norliza (2008) Milimeter-wave carrier generation system for radio overfiber. In: Seminar Kebangsaan Pendidikan Sains dan Matematik, 2008, Parkroyal Hotel, Penang.

Mohamed, Norliza (2008) Using statistical of verify the gold standard for pulmonary tuberculosis detection. In: 22nd International Congress and Exhibition on Computer Assited Radiology and Surgery, 2008, Barcelona, Sepanyol.

Mohamed, Nur Syarafina (2012) Simulation of total concentration for ellipsoidal shape drops by using foward difference explicit method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed, Rita (2011) Pengajaran kreatif jadual berkala berasaskan model kitar pembelajaran + kreativiti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamed, Sarajul Fikri and Misnan, Mohd. Saidin and Anumba, Chimay J. (2010) Innovative tool for construction site management practices. In: The CRIOCM 2010 15th International Symposium, 6-7 August 2010, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Mohamed, Siti Nor Hazanah (2012) Short-term forecast of gold price using generalized autoregressive conditional heteroscedastic models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed, Zaharuddin (2010) Dynamic modelling and characterisation of a two-link flexible robot manipulator. Journal of Low Frequency Noise Vibration and Active Control, 29 (3). 207 - 219.

Mohamed, Zalina (2002) Hubungan kemahiran pemasaran dengan demografi usahawan-usahawan industri kecil dan sederhana (IKS) di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohamed @ Mohd. Adnan, Azmi (2009) Variation works in privatization highways in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed Ali Mohammed Sultan, (2010) Techno-economic analysis of compressed natural gas carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Amin, Mohamed Afizal (2012) Development of sulfonation poly ether ether ketone membrane for microbial fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Ariff, Azmah Hanim (2007) Interfacial reaction between Sn -37Pb and Sn - 4Ag - 0.5Cu solders on different surface finishes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Bisher, Zakaryah Omar (2009) Accuracy assessment of areial triangulation based on a strip and a block of aerial photograph. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamed Dahlan, Halina (2010) Deriving priority in AHP using Evolutionary Computing approach. Wseas Transactions on information Science and Applications, 7 (5). 714 - 724.

Mohamed F.M., Mohamed (2009) Implementation of Carlson Survey 2009 software in survey engineering works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohamed Fathilullah Suhaimi, Engku Nuraisha Engku (2010) Pembangunan pembelajaran berbantukan komputer grafik bagi melihat hubungan pembelajaran berasaskan masalah dan kreativiti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamed Hirei, Hassan (2012) Development of inproved wireless client authentication mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Makhbul, Zafir Khan (2007) Perhubungan antara stesenkerja ergonomik dan stres di kalangan opertor pengeluaran dalam organisasi multinasional di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pengurusan dan Pembangunan Sumber Manusia.

Mohamed Mansour, Mohamed Khamis (2007) Development of roof-top bus air-conditioning system that responds to cooling lond variations in tropical countries. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Mohamed Murid, Ali Hassan (2011) Boundary integral equations with the generalized Neumann kernel for Laplace's equation in multiply connected regions. Applied Mathematics and Computation, 217 (9). 4710 - 4727.

Mohamed Noor, Norramlee (2010) Design and develop the Z-Source inverter for fuell cell system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Nor, Norhayati (2009) Gaya kepimpinan Ketua Jabatan Politeknik dan hubungannya dengan budaya kerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamed Omar , Mohamed Mashri (2008) Enhancement of pedestrian network system in Johor Bahru City Centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed Saat, Maisarah (2004) Kerahsiaan : tanggungjawab professional dari perspektif profesional perakaunan. In: Accounting Seminar, 2004, Kangar, Perlis.

Mohamed Saat, Maisarah (2003) Kesedaran etika dikalangan pelajar universiti. In: Accounting Seminar, 2003, Kangar, Perlis.

Mohamed Saat, Maisarah and Ashari, Hapriza and Ungku Ahmad, Ungku Norulakmar (2009) Persepsi pelajar institusi pengajian tinggi terhadap etika peperiksaan: satu tinjauan awal. In: Pembangunan Akademik: Beberapa Isu. Penerbit UTM Press, Skudai, Johor, pp. 21-32. ISBN 978-983-52-0723-5

Mohamed Salim, Maheza Irna and Tumiran, Mohammad Azizi and Makhtar, Siti Noormiza and Rosidi, Bust Anur and Ariffin, Ismail and Supriyanto, Eko (2010) Quantitative of hybrid magnetoacoustic method for detection of normal and pathological breast tissue. In: The 12th WSEAS International Conference on Automaitc Control, Modelling and Simulation (ACMOS'2010), 29-31 May 2010, Catania, Sicily, Itali.

Mohamed Shaharoun, Awaluddin (2003) Modelling approaches to the design of manufacturing information systems. In: Engineering & Technology Conference, 2003, Crowne Plaza Riverside. Kuching, Sarawak.

Mohamed Sharif Ahmed, Salaheldin Ahmed (2012) Chloride stress corrosion cracking of 316L stainless steel in sour gas service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Sultan, Al Amin (2012) Lean manufacturing implementation at automotive manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Yatim, Abd Halim (2003) Efficiency optimization of induction motor drive for air conditon compressor load. In: International Conference On Power Electronics and Drive Systems, 2003.

Mohamed Yatim, Abd Halim (2003) Efficiency optimization of induction motor drive for air conditon compressor load using neural network. In: Seminar On Artificial Intelligence Applications In Industry, 2003, Kuala Lumpur.

Mohamed Yatim, Abdul Halim (2010) Dynamic evolution control for synchronous buck DC-DC converter: Theory, model and simulation. Simulation Modelling Practice and theory, 18 (5). 663 - 676.

Mohamed Yatim, Abdul Halim (2003) Fuel cell scooter simulation using ADVISOR : approach & preliminary results. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Mohamed Yatim, Abdul Halim (2010) A novel control strategy of bidirectional DC-DC Converter for interfacing ultracapacitor to fuel cell electric vehicles system based on dynamic evolution control. International Review of Electrical Engineering-IREE, 5 (1). 64 - 69.

Mohamed Yusof, Nurfadzlin (2011) Moisture susceptibility of Malaysian hot mix asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Yusoff, Shaikh Mohamed (2003) Quality improvement using six-sigma methodology: a case study. In: International Conference on CAD/CAM, Robotics and Factories of Future, Cars & FOF 2003, 2003.

Mohamed Zabidi, Zubainun (2008) Corrosion study of erbium doped zinc tellurite glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohammad, Abu Bakar (2004) Development of 2 x 2 asymmetrical thermooptic switch. In: International Conference on electrical and Computer Engineering, 2004, n/a.

Mohammad, Abu Bakar (2004) MEMS on/off and 1 x 2 optical switch with integrated fiber aligment capability. In: IEEE Intenational Conference on Semiconductor Electronics, 2004, Kuala Lumpur.

Mohammad, Abu Bakar (2010) A new structure of MMI polymer thermooptic switch with a high refractive index contrast. Progress In Electromagnetics Research B (24). 103 - 120.

Mohammad, Gholamreza Zahedi and Parvizian, F. and Rahimi, M. R. (2010) An expert model for estimation of distillation sieve tray efficiency based on artificial neural network approach. Journal of Applied Sciences, 10 (12). 1076 - 1082.

Mohammad, Izran Sarrazin (2011) Post occupancy evaluation of building performance in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohammad, Nor Hazlin (2010) Project management maturity and performance measures of project management knowledge areas in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Azmi, Mohammad Norshazni (2011) Impacts of road safety stratagems on accident reduction in urban areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Dastgeib, Ali (2010) High voltage electric field application of pineapple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammad Hussain, Mohd. Azlan (2009) Pengaruh amalan penerapan kaedah pembelajaran aktif dalam kalangan guru MPAV terhadap pembinaan personaliti pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohammad Khanlou, Hossein (2012) The effect of pre-treatment parameters on titanium alloys prior to PVD coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Zabidi, Nadia Farhana (2009) Analisis kandungan modul pembelajaran dan huraian sukatan pelajaran menservis peralatan elektrik domestik berdasarkan aplikasi pendidikan berasaskan keterampilan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohammad Zaki, Mohd. Faiz (2012) Effect of soil nail on slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammadi, Maryam (2012) A mixed integer programming model formulation for solving the lot sizing problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammadian, Erfan (2010) Ultrasonic assisted water flooding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohammadpour, Atefeh (2008) Simulation modeling in construction industry for IBS implemention. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammadyan Yasouj, Seyed Esmaeil (2012) The influence of different types and arrangements of reinforcement on capacity of concrete wide beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Ahmad Kilani (2004) Menangani masalah remaja Muslim era pasca modenisme dan penyelesaiannya menurut perpspektif Islam. In: Seminar Antarabangsa Pemikiran Islam, 2004, n/a.

Mohammed, Ahmed N. (2009) Applying urban design in crime prevention in commercial area of Johor Bahru Central business district. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammed, Bayan Omar (2012) Macro feature-based discretization for identical twin's handwriting identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Haidar Hassan (2011) Soxhlet extraction of essential oil from Zingiber from officinale and optimization of process parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammed, Karwan Talaat (2011) The effects of plant growth regulators and herbicede dalapon on nicotiana tabaccum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Bioengineering.

Mohammed, Mohammed Mustafa (2009) Study of secure firewall filtering mechanism for network security. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammed, Zeaid T. (2009) Acceptance of information and communication technology in education among secondary schools teachers in Skudai, Johor, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohammed Al-Ahmadi, Abdullah Saad (2012) Multi-floor indoor positioning system using Bayesian graphical models. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammed Merdhah, Amer Badr (2010) Prediction and treatment of scale formation during water injection. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Mohammed Modeef, Alsofyani (2008) A web tutor for teaching Quran vocabulary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohammed Sa'arani, Adrianna (2012) Vortex formation at sluice gate as used at Department of Irrigation and Drainage Johor (JPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Saleh, Aqel (2012) Information system in accident prevention in UTM Casting Laboratory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Shaamala, Abduljabbar Hasan (2009) Enhance secure ad hoc on - demand distance vector protocol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamud Abadalla, Saeed Mohamed (2012) Social network sites and tools framework for project based learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohari, Nur Ameerah (2010) Pengurusan penyenggaraan pelabuhan perikanan kes kajian : kompleks LKIM Kuantan, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Moharnad Nordin, Nor Asikin (2008) Kajian awal penghasilan estolida berasaskan asid resinolek - oleik menggunakan mengkinasid polihetro. In: Seminar Minyak dan Lemak Kebangsaan 2008 ( SMILE 2008) , 2008, Kuantan, Pahang.

Mohd Ibrahim, Seeni Mohd. (2005) Water circulation pattern from sea surface current and chlorophyll[a deroves using satellite data in the South China Sea. In: 2nd International Hydrigraphic and Oceanographic Conference and Exhibiton, 2005, Kuala Lumpur.

Mohd Jar, Ayathull Dhalayla (2009) Spectroscopic and chromatographic technique for forensic discrimination of marker pen inks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd Miswan, Mohd Azraai (2010) Performance of vegetable oil as biodegradable oil-based drilling fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohd Rafie, Farihan (2009) Payment dilemma for sub contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd Razali Mahmud, (2006) Implementation of post-processing data thinning for multibeam echo sounding data. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 214 - 230. ISBN 978-983-52-0581-1

Mohd Razali Mahmud, (2006) LADGPS and WADGPS: applications, working procedures and accuracy for hydrographic surveying. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 63 - 85. ISBN 978-983-52-0581-1

Mohd Razali Mahmud, (2006) New challenge in automation pilotage system for stringent port navigation. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 305 - 315. ISBN 978-983-52-0581-1

Mohd Razali Mahmud, (2006) Optimisation of submarine pipeline routes using gis techniques of least cost analysis. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 344 - 352. ISBN 978-983-52-0581-1

Mohd Razali Mahmud, (2006) Optimization of hydrographic survey in ports and protected areas using multi-transducer system. In: Hydrography Survey: Current Trends, Techniques and Applications. Penerbit UTM, Johor , 114 - 127. ISBN 978-983-52-0581-1

Mohd Salleh, Khairul Anuar (2009) Evaluation of imaging performance of industrial digital radiography detector systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd Yusof, Farahwahida and Rosman, Arieff Salleh (2009) Relevansi kurikulum pendidikan tinggi Islam dengan keperluan semasa: pengalaman UTM. In: Pendidikan Tinggi Islam: Cabaran & Prospek. Pusat Penerbitan Universiti (UPENA), Shah Alam, pp. 191-204. ISBN 978-967-305-353-7

Mohd., Elyza (2012) Gas chromatography-mass spectrometric analysis of mitragynine in young and mature leaves of ketum plane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.