Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TH Building construction"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 550.

Article

Mohameda, Nurul Najidah and Yuan, Laisin and Lee, Siew Ling and Ho, Chin Siong and Chandren, Sheela and Hadi, Nur (2014) Preparation of hierarchical porous carbon derived from averrhoa bilimbi and its diffusion properties. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 61-64. ISSN 0127-9696

Abd. Rahman, Norhan and Kamaruddin, Samira Albati and A. Schrefler, Bernhard (2001) Numerical modelling of thermo-hydromechanical (THM) in deforming porous media for subsurface systems. Jurnal Teknologi B (34B). pp. 31-44. ISSN 0127-9696

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran (2011) Buckling behavior of general dome ends under external pressure, using finite element analysis. Key Engineering Materials, 471-47 . pp. 833-838. ISSN 1013-9826

Abdul Hamid, Abdul Rahim and Abd. Majid, Muhd Zaimi and Singh, Bachan (2008) Causes of accidents at construction sites. Malaysian Journal of Civil Engineering, 20 (2). pp. 242-259. ISSN 1823-7843

Abdullahi, Yahya and Embi, Mohamed Rashid (2015) Evolution of abstract vegetal ornaments in Islamic architecture. Archnet-IJAR, 9 (1). pp. 31-49. ISSN 1994-6961

Agboola, Oluwagbemiga Paul and Rasidi, Mohd. Hisyam and Said, Ismail (2017) The influence of open space utilization on residents' attachment with community: a case study of rural market square in southwest Nigeria. Archnet-IJAR, 11 (1). pp. 44-66. ISSN 1938-7806

Ahmed Memon, Zubair and Abd. Majid, Muhd. Zaimi and Mustaffar, Mushairry (2007) A systematic procedure for developing the 3D model to evaluate the construction project progress. Construction Innovation: Information, Process, Management, 7 (2). pp. 187-199. ISSN 1471-4175

Akinyode, Babatunde Femi and Tareef, Hayat Khan (2016) Influence of estate agents and building plan approval cost on housing affordability in developing cities. OSR Journal of Humanities and Social Science (IOSR-JHSS), 21 (9). pp. 47-55. ISSN 2279-0837

Alaraji, Khwla A. M. H. and Mohd. Jusan, Mahmud (2015) Flexible house attributes as perceived by the end-users. International Journal of Applied Engineering Research, 10 (7). pp. 18313-18324. ISSN 0973-4562

Ali, Norizan and Ho, Chin Siong (2014) Solid waste management in Asian countries: a review of solid waste minimisation (3 ' r) towards low carbon. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Alkali, Ibrahim Abubakar and Ahmad, Mohd. Hamdan and Said, Ismail (2014) The challenges of Nigerian hospital ward setting in providing for family participation. Applied Mechanics and Materials, 584-58 . pp. 142-151. ISSN 1660-9336

Amuda Yusuf, Ganiyu and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria and Mohd. Saidin, Misnan (2014) Towards developing building services standard method of measurement in Malaysia. Recent Trends in Social and Behaviour Sciences - Proceedings of the 2nd International Congress on Interdisciplinary Behavior and Social Sciences 2013, ICIBSoS 2013 . pp. 77-82.

Amuda-Yusuf, Ganiyu and Mohamed, Sarajul Fikri (2015) Essential features of a building services standard method of measurement in Malaysia. Engineering, Construction and Architectural Management, 22 (6). pp. 749-770. ISSN 0969-9988

Aris, Azmi and Sharratt, Paul N. (2007) Evaluation of photo-fenton degradation of reactive black 5 using response surface method. Malaysian Journal of Civil Engineering, 19 (1). pp. 26-41. ISSN 1823-7843

Ayob, Mohamad Haqzim and Efendi, Jon and Lai, Sin Yuan and Chandren, Sheela and Ho, Chin Siong and Nur, Hadi (2014) Synthesis and characterization of cobalt(ii) salicylaldimine complex supported on silica covered magnetite. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 21-23. ISSN 0127-9696

Azizul, Muhammad Farid Azizul and Knight-Lenihan, Stephen and Marjorie, Van Roon (2016) Sense shaping place: repositioning the role of sense of place in social-ecological systems from a bioregional planning viewpoint. The IAFOR Journal of Sustainability, Energy & the Environment, 3 (1). pp. 28-46. ISSN 2187-0632

Baharudin, Nurul 'Athiqah and Ismail, Alice Sabrina (2016) Architectural style of dawah mosque in Malaysia: from vernacular to modern structures. International Journal of Built Environment and Sustainability, 3 (2). pp. 70-78. ISSN 2289-8948

Bakhtiar, Khairul Anuar and Li, Yin Shen and Misnan, Siti Hajar (2008) A framework for comparison study on the major methods in promoting sustainable construction practice. Jurnal Alam Bina, 12 (3). pp. 55-69. ISSN 1511-1369

Bigdeli Rad, Vahid and Najafpour, Hamed and Ngah, Ibrahim and Shieh, Esmaeil and Bigdeli Rad, Hamid (2014) The systematic review on safety in urban neighborhoods. Life Science Journal, 11 (10). pp. 398-405. ISSN 1097-8135

Chau, Loon Wai and Yap, Z. C. and Chin, Siong Ho (2014) Tooling up urban planning for climate change mitigation in Malaysian cities. 8th International Symposium of The Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Cheng, Tung Chong and Hochgreb, Simone (2011) Measurements of lamir flame speeds of acetone/methane/air mixtures. Combustion and Flame, 158 . pp. 490-500. ISSN 0010-2180

Cheong Yong, Yee and Mustaffa, Nur Emma (2013) Critical success factors for Malaysian construction projects: An empirical assessment. Construction Management and Economics, 31 . pp. 1-21. ISSN 01446193

Dehdasht, Gholamreza and Zin, Rosli Mohamad and Keyvanfar, Ali (2015) Risk classification and barrier of implementing risk management in oil and gas construction companies. Jurnal Teknologi, 77 (16). pp. 161-169. ISSN 0127-9696

Dodo, Yakubu Aminu and Pontip, Stephen Nimlyat and Muhammed, Gambo Abdullahi and Kandar, Mohd.Zin (2016) A field study of thermal and visual performance of self-shading energy commission diamond building, Putrajaya, Malaysia. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Embi, Mohamed Rashid and Said, Suzana (2008) An information model for the traditional long-roof typed malay houses. Jurnal Alam Bina, 12 (3). pp. 19-54. ISSN 1511-1369

Enegbuma, Wallace Imoudu and Ali, Kherun Nita and Ologbo, Andrew Chukwuyem and Aliagha, Uche Godwin (2014) Preliminary study impact of building information modelling use in Malaysia. IFIP Advances in Information and Communication Technology, 442 . pp. 51-62. ISSN 1868-4238

Fujita, Yoshinori and Matsumoto, Hiroshi and Ho, Chin Siong (2009) Assessment of CO2 emissions and resource sustainability for housing construction in Malaysia. International Journal of Low-Carbon Technologies, 4 . pp. 1-11. ISSN 17481317

Gharakhani, Alireza and Sediadi, Eka and Khan, Tareef Hayat and Sabzevar, Hadi Bagheri (2014) Use of natural ventilation in Malaysia's future green housing. Advanced Materials Research, 935 . pp. 316-319. ISSN 1022-6680

Ghasemi, Mohammad Mir and Lamit, Hasanuddin and Shafaghat, Arezou (2014) The association between riverscape and place attachment in historical cities in Malaysia. Jurnal Teknologi, 70 (7). pp. 147-154. ISSN 0127-9696

Ghomeshi, Mohammad and Nikpour, Mansour and Mohd. Jusan, Mahmud (2012) Identifying the different aesthetic quality of building attributes from architects perspectives. International Journal of Modern Engineering Research (IJMER), 2 (3). pp. 917-919. ISSN 2249-6645

Haron, Zaiton and Oldham, David and Yahya, Khairulzan and Zakaria, Rozana (2008) A probabilistic approach for modelling of noise from construction site for sustainable environment. Malaysian Journal of Civil Engineering, 20 (1). pp. 58-72. ISSN 1823-7843

Haron, Zaiton and Mohd. Noh, Hamidun and Yahya, Khairulzan and Omar, Wahid and Abd Majid, Zaimi (2012) Assessing noise emission levels from earthwork construction equipment. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 13-28. ISSN 1823-7843

Hesham, E. O. and Said, Ismail and Rasidi, Mohd. Hisyam (2014) Residents' perception towards social interaction among Malaysian ethnic groups in urban park. Recent Trends in Social and Behaviour Sciences - Proceedings of the 2nd International Congress on Interdisciplinary Behavior and Social Sciences 2013, ICIBSoS 2013 . pp. 9-15.

Hussin, Mohd. Warid and Lim, Siong Kang and Zakaria, Fadhadli (2007) Engineering properties of high volume slag cement grout in tropical climate. Malaysian Journal of Civil Engineering, 19 (1). pp. 42-54. ISSN 1823-7843

Idris, Siti Rabiatull Aisha and Ourdjini, Ali (2012) Effect of multiple reflow on IMC formation using various surface finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410

Ismail, Fairuz Diyana and Aziz, Muhammad Safwan and Teeka, Chat and Ali, Jalil and Yupapin, Preecha Phromphan (2012) Filter design using multi-bragg reflectors. World Journal of Modelling and Simulation, 8 (3). pp. 205-210. ISSN 1746-7233

Jasimin, Tuti Haryati and Mohd. Ali, Hishamuddin (2014) The impact of sustainability on the value of commercial office buildings in Malaysia: Russian-Doll model approach. Jurnal Teknologi, 71 (4). pp. 131-143. ISSN 0127-9696

Jiun, Ch’nghui and Lim, Yong Long and Yi, Ng Xin (2014) Preliminary survey finding of the built and living environment in Camp 5, Pulau Jerejak settlement. Jurnal Teknologi, 71 (5). pp. 25-29. ISSN 0127-9696

Kamarudin, Zumahiran and Said, Ismail (2008) Visual forms of carved components in traditional timber houses of Kelantan and Terengganu. Jurnal Alam Bina, 12 (3). pp. 71-96. ISSN 1511-1369

Karimi, Narciss and Sediadi, Eka and Lim, Yaik Wah (2015) Energy saving in residential apartments by using PV shading. International Journal of Applied Engineering Research, 10 (15). pp. 36012-36015. ISSN 0973-4562

Kelvin, L. Walls (2001) Fire safety in buildings. Jurnal Teknologi B, Universiti Teknologi Malaysia, 34 (B). pp. 13-20. ISSN 0127-9696

Kubota, Tetsu and Zakaria, Mohd. Azuan and Abe, Seiji and Hooi Chyee, Doris Toe (2017) Thermal functions of internal courtyards in traditional Chinese shophouses in the hot-humid climate of Malaysia. Building and Environment, 112 . pp. 115-131. ISSN 0360-1323

Lamit, Hasanuddin and Dilshan, Remaz Ossen and Raja Shahminan, Raja Nafida and Ahmed Al-Ameri, Adeb Qaid (2016) Urban heat island and thermal comfort conditions at micro-climate scale in a tropical planned city. Energy and Buildings, 133 . pp. 577-595. ISSN 03787788

Leng, Pau Chung and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Hamid, Malsiah and Baharvand, Mohammad (2014) The effects of orientations on the room's thermal performance in the tropics. Applied Mechanics and Materials, 567 . pp. 631-636. ISSN 1660-9336

Lim, Yalk Wah and Kandar, Mohd. Zin and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Megat Abdullah, Aminatuzuhariah (2012) Building facale design for daylighting quality in typical government office building. Building and Environment, 57 . pp. 194-204. ISSN 0360-1323

Ling, Tung Chai and Siong, Kang Lim and Hussin, Mohd. Warid and Zakaria, Fadhadli (2008) GGBFS as potential filler in polyester grout : flexural strength and toughness. Construction and Building Materials . pp. 1-9.

Loh, Yun Lu and Lee, Janice Yim Mei and Al-mulali, Usama and Ahmad, Nurul Afiqah and Mohammad, Izran Sarrazin (2015) Housing bubble in Penang prediction and determinants. Jurnal Teknologi, 73 (5). pp. 65-69. ISSN 2180-3722

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Liang, Maybelle and Jaw, Siow Wei and Azimi, Mohammadamin (2016) Flexural capacity enhancement of rectangular high-strength concrete columns confined with post-tensioned steel straps: experimental investigation and analytical modelling. Structural Concrete, 17 (4). pp. 668-676. ISSN 1464-4177

Mahmud, Shahril Anwar and Ahmad, Abdullah Sani and Megat Abdullah, Aminatuzuhariah (2012) Domestic possessions and space adequacy in urban homes. International Transaction Journal of Engineering, Management and Applied Sciences and Technologies, 3 (4). pp. 439-454. ISSN 1906-9642 (Electronic) ; 2228-9860 (Online)

Majid, Mohammad Rafee and Nordin, Alia N. and Johar, Foziah and Tifwa, H. Y. (2014) Travel emission profile of Iskandar Malaysia neighbourhoods from pre-1980s to 2000s. 8th International Symposium of The Digital Earth (Isde8), 18 (1). ISSN 1755-1315

Md. Azmi, Fatin Afiqah and Mohammad, Mohammad Tahir Sabit (2015) A proposal for a single tribunal of estates distribution in Malaysia. Jurnal Teknologi, 75 (10). pp. 1-16. ISSN 0127-9696

Md. Tahir, Mahmood and Hussein, Mohd. Azman and Sulaiman, Arizu and Mohamed, Shahrin (2009) Comparison of component method with experimental tests for flush end-plate connections using hot-rolled Perwaja Steel Sections. International Journal of Steel Structures, 9 (2). pp. 161-174. ISSN 1598-2351

Megat Abdullah, Aminatuzuhariah (2009) Best practices in managing goal and strategies for multi-projects in building construction industry. Jurnal Alam Bina, 15 (1). pp. 1-20. ISSN 1511-1369

Moeinaddini, Mehdi and Asadi-Shekari, Zohreh and Shah, Muhammad Zaly (2014) The relationship between urban street networks and the number of transport fatalities at the city level. Safety Science, 62 . pp. 114-120. ISSN 0925-7535

Moghimi, Vahid and Mohd. Jusan, Mahmud and Izadpanahi, Payam and Mahdinejad, Jamaleddin (2017) Incorporating user values into housing design through indirect user participation using MEC-QFD model. Journal of Building Engineering, 9 . pp. 76-83. ISSN 2352-7102

Mohamad Nor, N. H. and Muhamad, Norhamidi and Ariffin, A. K. and Ruzi, M. and Jamaludin, Khairur R. and Sufizar, A. (2011) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. Journal of Applied Sciences, 11 (10). pp. 1833-1838. ISSN 1812-5654

Mohamad Yatim, Yahya (2008) An analysis of the effect of staircase intermediate landing floor on the evacuation time. Jurnal Alam Bina, 12 (3). pp. 1-18. ISSN 1511-1369

Mohamad Zin, Rosli and Mohamad, Mohamad Ibrahim and Mansur, Shaiful Amri and Chan Donald, Bing Tee (2008) Guidelines for the preparation and submission of work schedule for construction project. Malaysian Journal of Civil Engineering, 20 (2). pp. 145-159. ISSN 1823-7843

Mohamed, Sarajul Fikri and Yusuf, Ganiyu Amuda (2014) Standard for uniformity in building engineering services price forecast. IAENG Transactions on Engineering Sciences - Special Issue of the International MultiConference of Engineers and Computer Scientists, IMECS 2013 and World Congress on Engineering, WCE 2013 . pp. 183-192.

Mohamed Ali, Nasly and Amani, Nima and Abd. Samad, Roslida (2011) Developing a framework of economic model for building component lifecycle repair. Advanced Materials Research, 255-26 . pp. 3893-3897. ISSN 1022-6680

Mohamed Kamar, Haslinda and Kamsah, Nazri and Senawi, Mohd. Yusoff (2013) Computerized simulation of automotive air-conditioning system: a parametric study. International Journal of Computer Science Issues, 1 (1). pp. 787-794. ISSN 1694-0784

Mohd. Danuri, Mohd. Suhaimi and Mohd. Ishan, Zahira and Mustaffa, Nur Emma and Abdul Karim, Saipol Bari and Mohamed, Othman and Hanid, Mahanim (2016) Dispute avoidance procedure:formulating a workable legal system in the Malaysian construction industry. Journal of Design and Built Environment, 16 (1). pp. 37-46. ISSN 2232-1500

Mohd. Subha, Nurul Adilla and Rahmat, Mohd. Fua’ad and Ishaq, Kashif M. (2011) Controller design for a pilot-scale heating and ventilation system using fuzzy logic approach. Jurnal Teknologi (Sciences and Engineering), 54 . pp. 123-139. ISSN 0127-9696

Mohd. Yusof, Zakaria (2005) Ke arah pengurangan kebergantungan tenaga kerja asing di sektor binaan. Jurnal Alam Bina, 7 (2). pp. 71-86. ISSN 1511-1369

Mohd. Zin, Abdullah Asuhaimi and Soomro, Dur Muhammad (2011) Critical study of underfrequency load shedding schemes. International Review of Electrical Engineering (IREE), 6 (3). pp. 1287-1296. ISSN 1827-6660

Muhammad, Rafeq Razak and Johar, Foziah and Abd. Khalil, Rabiatul Adawiyah (2016) The impact of Iskandar Malaysia development on urban amenities. Planning Malaysia, 4 (4). pp. 121-134. ISSN 1675-6215

Najafpour, Hamed and Bigdeli Rad, Vahid and Lamit, Hasanuddin (2014) The systematic review on sense of security in urban neighborhoods. Life Science Journal, 11 (10). pp. 89-97. ISSN 1097-8135

Najafpour, Hamed and Bigdeli Rad, Vahid and Lamit, Hasanuddin and Rosley, Muhamad Solehin Fitry (2014) The systematic review on quality of life in urban neighborhoods. Life Science Journal, 11 (7). pp. 355-364. ISSN 1097-8135

Omar, Wahid and Noor Mohamed, Roslli (2002) The performance of pretensioned prestressed concrete beams made with lightweight concrete. Jurnal Kejuruteraan Awam, 14 (1). pp. 60-70. ISSN 0128-0147

Othman, Norazam (2004) Kandungan dokumen kontrak pembinaan: perbandingan antara teori dan amalan. Jurnal Alam Bina, 6 (1). pp. 55-65. ISSN 1511-1369

Pondi, Shafiyah and Efendi, Jon and Ho, Chin Siong and Yuan, Laisin and Chandren, Sheela and Hadi, Nur (2014) The study of albumin release from silica/albumin as a potential drug delivery carrier. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 113-117. ISSN 0127-9696

Prawoto, Yun and Moin, A. and Tadjuddin, M. and Wan Nik, W. B. (2011) Effect of microstructures on SCC of steel: field failure analysis case study and laboratory test result. Engineering Failure Analysis, 18 (7). pp. 1858-1866. ISSN 1350-6307

Rad, Vahid Bigdeli and Najafpour, Hamed and Ngah, Ibrahim and Shieh, Esmaeil and Rad, Hamid Bigdeli (2014) The systematic review on physical activity in urban neighborhoods. Life Science Journal, 11 (9). pp. 14-22. ISSN 1097-8135

Razali, Rasidah and Ho, Chin Siong and Lai, Sin Yuan and Chandren, Sheela and Nur, Hadi (2014) Some aspects of particuology in heterogeneous catalysts. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 95-101. ISSN 0127-9696

Richard, W. Bukowski and P., E. and Fsfpe, Fsfpe and Yossy, Hirano and Rackliffe, Tony (2001) Standards Linkages To A Performance-Based Regulatory Framework. Jurnal Teknologi B, Universiti Teknologi Malaysia, 34 (B). pp. 1-11. ISSN 0127-9696

Rostami, Raheleh and Lamit, Hasanuddin and Khoshnava, Seyed Meysam (2014) The role of historical persian gardens on the health status of contemporary urban residents gardens and health status of contemporary urban residents. EcoHealth, 11 (3). pp. 308-321. ISSN 1612-9202

Said, Ismail (2001) Pluralism In Terrace Housing Community Through Ethnic Garden. Jurnal Teknologi B (35B). pp. 41-53. ISSN 0127-9696

Said, Ismail and Desa, Abdul Malek and Syed Ariffin, Syed Ahmad lskandar (2008) Constructing timber architecture : merging the skills of architect, carpenter and masonry workers. Jurnal Alam Bina, 12 (3). pp. 97-108. ISSN 1511-1369

Said, Ismail and Kei, Saito and Yeo, Owen Thian Seng (2014) Quantitative study of green area for climate sensitive terraced housing area design in Malaysia. IOP Conference Series: Earth and Environmental Science, 18 (1). ISSN 1755-1315

Saleh, Abdul Latif and Aliabadi, MH (1998) Crack growth analysis in reinforced concrete using BEM. Journal of Engineering Mechanics, 124 (9). pp. 949-958. ISSN 0733-9399

Sapri, Maimunah and Muhammad, Shehu (2010) Monitoring energy performance in higher education buildings for sustainable campus. Malaysian Journal of Real Estate, 5 (1). pp. 18-25. ISSN 1823-8505

Sarkile, Abubakar Kawuwa and Ahmed, Sani Aminu and Bashir, Faizah Mohammed and Dodo, Yakubu Aminu (2016) A review of retractable vault covered housing for the Fulbe nomads of Nigeria. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 3 (1). pp. 3818-3824. ISSN 3159-0040

Sekak, S. N. A. A. and Rahmat, I. and Ahmad, N. and Junus, Y. M. (2016) The study of energy efficiency performance in refurbishment projects. Advanced Science Letters, 22 (5-6). pp. 1640-1642. ISSN 1936-6612

Shafii, Faridah and Omar, Wahid and Mohammad, Shahrin and Makhtar, Ahmad Mahir (2001) Standardisation Of Structural Design: A Shift From British Standards To Eurocodes. Jurnal Teknologi B (34B). pp. 21-30. ISSN 0127-9696

Shaikh Salim, Sheikh Ahmad Zaki and Hagishima, Aya and Tanimoto, Jun and Ikegaya, Naoki (2011) Aerodynamic parameters of urban building arrays with random geometries. Boundary-Layer Meteorology, 138 . pp. 99-120. ISSN 0006-8314

Shika, Suleiman Aliyu and Sapri, Maimunah and Sipan, Ibrahim and Abubakar, Alkali Ibrahim and Umar, Aminu and Wakawa, Usman Bukar (2013) Approach to calibrated simulation tool for improved building performance. Advanced Materials Research, 689 . pp. 22-25. ISSN 1662-8985

Shuaibu, Abdul-Wahab and Majid, Mohammad Rafee and Aliyu, Hussaini Bapetel (2015) Insights into small scale commercial water services in Nigerian urban area. Jurnal Tekonologi, 77 (14). pp. 77-84. ISSN 2180-3722

Tajul Ariffin, Hamizah Liyana and Aziz, Zeeshan and Mohd. Raslim, Faraziera and Jaafar, Mastura (2016) Identify disputes in the construction industry: the way forward for innovative procurement system in Malaysia. Research Journal of Fisheries and Hydrobiology, 11 (3). pp. 98-104. ISSN 1816-9112

Umar, Aminu and Embi, Mohamed Rashid and Muhamad Yatim, Yahya and Alkali, Ibrahim A. (2015) Experts influence on fire safety criteria ranking for factory buildings in Nigeria. Jurnal Teknologi, 77 (14). pp. 95-98. ISSN 2180-3722

Umaru, E. T. and Muhamad Ludin, Ahmad Nazri and Sabri, Soheil (2014) Spatiotemporal analysis of the spread of meningococcal meningitis in Kaduna Metropolis, 2007-2011. IOP Conference Series: Earth and Environmental Science, 18 (1). ISSN 1755-1315

Yadollahi, Mohammad Reza and Ansari, Reza and Abd. Majid, Muhd. Zaimi and Chong, Heap Yih (2015) A multi-criteria analysis for bridge sustainability assessment: a case study of Penang Second Bridge, Malaysia. Structure and Infrastructure Engineering, 11 (5). pp. 638-654. ISSN 1573-2479

Yusuf, Ganiyu Amuda and Mohamed, Sarajul Fikri and Remeli, Suhaila (2013) Factors inhibiting the adoption of a uniform pricing mechanism for building services. International Journal of Engineering Business Management, 5 . pp. 1-10. ISSN 18479790 (Submitted)

Zahari, M. A. Z. and Majid, M. R. and Ho, C. S. and Kurata, G. and Nadhirah, N. and Irina, S. Z. (2016) Relationship between land use composition and PM10 concentrations in Iskandar Malaysia. Clean Technologies and Environmental Policy, 18 (8). pp. 2429-2439. ISSN 1618-954X

Zen, Irina Safitri and Ahamad, Rahmalan and Omar, Wahid (2014) The development and measurement of conducive campus environment for Universiti Teknologi Malaysia (UTM) of campus sustainability. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 71-82. ISSN 2180-3722

Zen, Irina Safitri and Noor, Zainura Zainon and Yusuf, Rafiu Olasunkanmi (2014) The profiles of household solid waste recyclers and non-recyclers in Kuala Lumpur, Malaysia. Habitat International, 42 . pp. 83-89. ISSN 0197-3975

Book Section

Abdul Kadir, Mohd. Razif and Abdul Rahim, Ruzairi and Rahiman, Mohd. Hafiz Fazlaul and Mansor, Muhammad Saiful Badri (2011) Control door lock system via sms (short messaging system). In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 165-182. ISBN 978-967-354-185-0

Abdul Malik, Mohd. Helmi Alsykran and Abdul Rahim, Ruzairi and Yunos, Yusri and Pusppanathan, Muhammad Jaysuman and Amari, Hudabiyah Arshad (2011) Automatic door lock system. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 149-160. ISBN 978-967-354-184-3

Abdul Rahim, Ruzairi and Sahlan, Shafizhuhaza and Kazemi, Mohammad Saeed (2011) Heat, smoke detection and other indicators of a fire. In: Progress in Process Tomography & Instrumentation System: Series 3/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 23-34. ISBN 978-967-354-180-5

Abdullah, Mat Naim and Misnan, Saidin and Wan Mahmood, Wan Yusof (2008) A case study on quality management system in construction project. In: Quality Management System in Malaysian Construction Industry. Penerbit UTM, Skudai, Johor Bahru, pp. 36-63. ISBN 978-983-52-0588-0

Baba, Maizan and Abdullah, Mat Naim and Wan Mahmood, Wan Yusof and Misnan, Saidin (2008) An application model of quality management system in a construction project. In: Quality Management System in Malaysian Construction Industry. Penerbit UTM , Johor, pp. 64-84. ISBN 978-983-52-0588-0

Koo, Nyuk Kin and Abd. Rozan, Mohd. Zaidi (2011) Development of Pasir Gudang community emergency fire response framework. In: Innovation in Information Systems: Series 2. Penerbit UTM Press, Skudai, Johor, pp. 137-150. ISBN 978-983-52-0813-3

Nashirudin, Mohd. Azlan Syah and Jasmi, Kamarul Azmi (2008) Cadangan Penyediaan tempat Wuduk yang Efisien. In: Pengurusan Berkualiti Memacu Kecemerlangan Pengurusan Masjid. Penerbit UTM , Johor, pp. 124-140. ISBN 978-983-52-0508-8

Ossen, Dilshan Remaz (2008) Building simulation for energy efficient solar shading. In: Methodology in Architectural Research. Penerbit UTM , Johor, pp. 58-79. ISBN 978-983-52-0592-7

Sahlan, Shafishuhaza and Mohd. Fazli, Mohd. Faiz and Abdul Wahab, Norhaliza (2012) Automatic controlled fan. In: Process Tomography & Instrumentation -Series 9. Penerbit UTM, Skudai, Johor, pp. 169-188. ISBN 978-983-52-0816-4

Ting, Hie King and Abdullah, Mat Naim and Ayop, Mohd. Hanaffi and Sudin, Mohd. Noor (2008) ISO 9000 critical quality elements for a construction project team. In: Quality Management System in Malaysian Construction Industry. Penerbit UTM , Johor, pp. 25-35. ISBN 978-983-52-0588-0

Monograph

Abd. Hamid, Hazlan and Makhtar, Ahmad Mahir and Awang, Abdullah Zawawi and Omar, Wahid (2002) Study on the behaviour of repaired reinforced concrete (RC) concrete elements. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Ahmad Baharuddin and Rais, Ahmad Zaidon (2005) The effects of diaphragm components in resisting lateral stability of precast concrete frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Ahmad Baharuddin and Saim, Abd. Aziz and Md. Tahir, Mahmood and Mohammad, Shahrin (2001) Analytical studies of the behaviour of semi-rigid non-sway frames with tubular columns. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdullah, Arham and Sohaili, Johan and Azman, Azizul and Kassim, Mohamad Adam (2008) A methodological analysis of demolition works in Malaysia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Abdullah, Redzuan and Abd. Hamid, Hazlan (2006) An investigation on the feasibility of the use of dry floor system for low cost construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Adnan, Azlan and Meldi, Suhatril (2009) Derivation of attenuation equations for distant earthquake suitable for Malaysia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ahmad, Supian and Doris Toe, Hooi Chyee (2008) Thermal comfort in existing terraced houses in Malaysia : energy saving strategies to reduce the use of airconditioners. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Bakhteri, Jahangir and Omar, Wahid and Makhtar, Ahmad Mahir (2004) Analysis of the reinforced concrete columns concealing rain water pipe in multi-storey buildings. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Bakhteri, Jahangir and Makhtar, Ahmad Mahir (2003) Investigation of failure modes in unreinforced brick masonry walls subjected to different load combinations. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hashim, Noor Baharim and Ibrahim, Zulkiflee and Huddleston, David H. and Ng, Boon Chong (2003) Hydraulic performance of high-velocity channels in flood-prone areas. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Kassim, Khairul Anuar (2009) The effect of catalyst on soil stabilization by application of lime. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Khalid, Abd. Ghani and Abdul Hamid, Razali and Mohd. Yusof, Zakaria and Misnan, Mohd. Saidin (2006) Data-base: harga bahan dan buruh binaan. Project Report. Faculty of Built Engineering, Skudai, Johor. (Unpublished)

Khalid, Abdul Ghani and M. Yusof, Zakaria and A. Hamid, Razali and Misnan, Mohd. Saidin (2003) Penyediaan indeks kos bangunan. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Marto, Aminaton and Kasim, Fauziah (2003) Characterisation of Malaysian residual soils for geotechnical and construction engineering. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Noor, Norhazilan (2009) Statistical modelling of corrosion growth in marine environment. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Md. Nor, Hasanan and Abd. Muti, Abd. Aziz and Che Puan, Othman and Chik, Abdul Aziz and Ismail, Che Ros and Ling, Tung Chai and Mudiyono, Rachmat (2008) Development of new technologies for interlocking concrete block pavement (ICBP). Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Md. Nor, Hasanan and Ismail, Che Ros (2006) The effect of thickness and laying pattern of paver on concrete block pavement. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Tahir, Mahmood and Mohammad, Shahrin and Yahaya, Nordin and Saad, Sarifuddin and Abd. Rahman, Ahmad Baharuddin (2006) Economic aspects of the use of partial and full strength joints on multi-storey unbraced steel frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Tahir, Mahmood and Osman, Mohd. Hanim and Abd. Rahman, Ahmad Baharuddin and Mohammad, Shahrin and Saad, Sarifuddin and Omar, Noorliyana and Othman, Nor Hazimah and Tan, Cher Siang and Shek, Poi Ngian and Thong , Chin Mun (2007) Design procedure of the use of partial strength joints on multi-storey steel frames using TWP sections and Perwaja Sections. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Mohammad, Mohammad Ibrahim and Abdullah, Arham (2005) Determining the basic principles in managing project schedule for construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amin, Mohd. For and Kassim, Azman and Mohamad, Edy Tonnizam and Ong, Heng Yau (2003) Classification of filled joint based on the characteristics of its constitutive components. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Rasdi, Mohd. Tajuddin and Syed Ariffin, Syed Ahmad Iskandar (2008) The development of the modern ideas of Islamic architecture in the modern Malaysia. Project Report. Faculty of Built Enviroment, Skudai, Johor. (Unpublished)

Mohd. Yusuf, Aminah and Abd. Majid, Muhd. Zaimi and Zakaria, Rozana (2001) An effectiveness of communication in project undertaking: problems and constraints. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mustaffar, Mushairry and Ahmad, Azhar and Sa'ari, Radzuan (2005) Investigating the feasibility of photogrammetric area-based image matching technique in the measurement of three-dimensional deflections of structures. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mustaffar, Mushairry and Katimon, Ayob and Hanapi, Muhammad Nassir and Sa'ari, Radzuan (2006) Hydrological and hydraulic study of water management system study for PT Bhumireksa Nusasejati, Sumatera, Indonesia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Omar, Wahid and Awang, Abdullah Zawawi (2006) A fundamental study of improving ductility of reinforced high-strength concrete (HSC) members. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ramli, Mohd. Zamri and Ahmad, Baderul Hisham and Abdul Rahman, Azlan (2005) Theoretical assessment of bridge structural integrity from vibration signature analysis. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Syed Mahdzar, Sharifah Salwa and Wong, Zhi Zhong (2017) Flexible and adaptable public housing for youth in Malaysia. Project Report. Northumbria University Press.

Yaakup, Ahris and Muhammad Ludin, Ahmad Nazri (2008) Criteria for urban sprawl / land use expansion. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Conference or Workshop Item

A. M., Adnan and M. S., Fathi (2012) A review of value creation from procurement contracts and business models for district cooling systems in Malaysia. In: 8th Asia Pacific Structural Engineering and Construction Conference (APSEC), October 2-4, 2012, Shangri-La, Surabaya, Indonesia. (Submitted)

Ab. Rani, Nur Izzati and Preece, Christopher Nigel and Ismail, Syuhaida (2015) Globalization and liberalization in the Malaysian construction industry. In: 4th International Conference on Engineering Business Management (ICEBM 2015), 22-23 Aug, 2015, Kuala Lumpur, Malaysia.

Abd Majid, Muhd. Zaimi (2013) Future building performance factors in regional development for energy efficieint travel plan. In: Asia Future Conference 2013 (AFC13), 2013.

Abd Majid, Muhd. Zaimi (2013) Investigation on future building performance factors towards energy efficient travel plan in regional development. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

Abd. Aziz, Hazlinda and Rasidi, Mohd. Hisyam (2013) Review on methodology of modeling green space network in urban landscape planning. In: Proceeding South East Asia Symposium (SEATUC 7th), 4-6 March, 2013, Bandung, Indonesia.

Abd. Rahman, Ahmad Baharuddin and Omar, Wahid (2006) Issues and challenges in the implementation of Industrialised Building Systems in Malaysia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdul Rahman, Muhammad Zulkarnain and Razak, Khamarrul Azahari and Ishak, Nurliyana Izzati and Asmadi, Mohd Asraff (2015) Extraction and characterization of vegetation anomalies induced by landslides from airborne lidar data. In: Seminar Bencana Alam 2015 (Bencana 2015), 1-2 Dec, 2015, Sabah, Malaysia.

Abdullah, A. and Thai, O. B. (2006) Personal digital assistants as a mobile inspection system at construction site. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abedi, Mohammad and Fathi, Mohamad Syazli and Muhamad Rawai, Norshakila (2012) A review of industrialised building system in Malaysian construction industry. In: Management in Construction Research Association (MiCRA), 2012, Kuala Lumpur, Malaysia.

Agboola, Oluwagbemiga Paul and Rasidi, Mohd. Hisyam and Said, Ismail and Zakka, Solomon Dyachia and Shuaibu, Abdul-Wahab (2016) Exploration of resident's social interactions in market square and its impact on community well being. In: 6th International Graduate Conference on Engineering Science and Humanities, 15-17 Aug, 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Ahmad, Mohd. Hamdan and Ariffin, Azman and Malik, Tasaduq Abbas (2013) Visualizing the application of GIS in transformation towards a sustainable development and a low carbon society. In: International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Ahmad, Yusof and Afgani, Eusoff @ Yendo and Saad, Hamid (2014) Rural transformation: a lesson learned from agropolitan development programs in Malaysia. In: International Conference Urban and Regional Planning (ICURP) 2014, 9-11 May, 2014, Skudai, Johor.

Ahmad Latiffi, Aryani and Brahim, Juliana and Mohd., Suzila and Fathi, Mohamad Syazli (2015) Building information modeling (BIM): exploring level of development (LOD) in construction projects. In: Applied Mechanics And Materials, 1-4 Dec 2015, Batu Pahat, Johor.

Ahmed Memon, Zubair and Abd. Majid, Muhd. Zaimi and Mustaffar, Mushairry (2006) Digitalizing Construction Monitoring (DCM): an overview of Malaysian construction industry and proposing prototype software. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ali, Mohamad Azal Fikry and Saad, Hamid (2014) The function of rural service center in tourism activities. In: International Conferance on Urban and Regional Planning, 2014, 9-11 May, 2014, Skudai, Johor.

Ali, Mohamad Azal Fikry and Saad, Hamid and Johan, Muhamad Firdaus (2015) Rural service center availability in tourism facilities infrastructure at Malaysia special tourism zone. In: 6th RRPG International Conference and Field Study, 28-29 Sept, 2015, Indonesia.

Alias, Muhammad Khairol Anwar and Sabri, Soheil and Johar, Foziah and Karbassi, Zohreh and Majid, Mohd. Rafee and Muhamad Ludin, Ahmad Nazri (2014) A conceptual framework for development of public health oriented environment planning and design measures with focus on childhood obesity. In: International Conference on Urban Planning 2014: Planning in an Uncertain World, 9-11 May, 2014, Johor Bahru, Malaysia.

Aliyu, Mustapha and Muhammad Ludin, Ahmad Nazri (2014) Agricultural development in Nigeria: the constraints and potentials. In: International Planning on Urban and Regional Planning: Planning in Uncertain World, 9-11 May, 2014, Skudai, Johor.

Alkali, Ibrahim Abubakar and Ahmad, Mohd. Hamdan and Said, Ismail (2014) The challenges of Nigerian hospital ward setting in providing for family participation. In: 4th International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2014, 24-25 May, 2014, China.

Almula, Thamir A. D. M. S. and Sharifi, S. and Sharifishourabi, Gholamali and Gohari, Soheil and Ayob, Amran and Yahya, Mohd. Yazid (2013) Static analysis of stitched sandwich beams with functionally graded foam core. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28 - 29 August 2013, Malacca; Malaysia.

Amuda Yusuf, Ganiyu and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria and Misnan, Mohd. Saidin (2013) Towards developing building services standard method of measurement in Malaysia. In: 2nd International Congress on Interdisciplinary Behavior and Social Science, ICIBSoS 2013, 4-5 Nov,2013, Jakarta, Indonesia.

Bahrudin, Mohd. Zaki and Zulibrahim, Mohamad Zulikhram and Saad, Hamid (2015) Rural excellence awards as a catalyst of sustainable economic program in rural area. In: The 6th International Conference and Field Study in Indonesia 2015 - Rural Research and Planning Group (RRPG), 28-29 Sept, 2015, Indonesia.

Ch'ng, Hui Jiun and Lim, Yong Long and Ng, Xin Yi (2014) Preliminary findings for Pulau Jerejak Leper Settlement: reconstructing the built and living environment of Camp 5. In: 5th Annual Conference. International Graduate Conference on Engineering, Science and Humanities 2014 (IGCESH2014), 19-21 August, 2014, Skudai, Johor.

Choon, T. T. and Sim, L. C. and Connie, T. and Nita, A. K. and Uche, A. G. and Chen, G. K. (2016) Influential factors in estimating and tendering for construction work. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Dodo, Y. A. and Kandar, M. Z. and Ossen, D. R. and Jibril, J. D. and Bornoma, A. H. and Abubakar, A. I. (2013) Importance of a view window in rating green office buildings. In: Advanced Materials Research.

Eluwa, Stephen Enyinnaya and Ho, Chin Siong (2013) Willingness to engage in energy conservation and CO2 emissions reduction: an empirical investigation. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Enegbuma, Wallace Imoudu and Ali, Kherun Nita (2013) Hypothesis analysis of building information modelling penetration in Malaysian Construction Industry. In: Proceedings of the CIB World Building Congress 2013, 2013.

Fathi, Mohamad Syazli (2011) Major mitigation measures for delays in construction projects. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia.

Fathi, Mohamad Syazli and Abedi, Mohammad and Mirasa, Abdul Karim (2012) Construction industry experience of industralised building system in Malaysia. In: Ninth International Congress on Civil Engineering ((ICCE), Isfahan University of Technology (IUT), May 8-10, 2012, Isfahan, Iran. (Submitted)

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia (2010) An innovative mobile application for construction programme managers. In: 6th International Conference on Innovation in Architecture, Engineering & Construction (AEC), 9-11 June 2010, The Nittany Lion Inn, THe Pennsylvannia State University, USA.

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia and Zakiyudin, Mohd. Zulakhmar (2009) Real-time mobile information system for construction programme management. In: Proceeding of 2nd Construction Industry Research Achievement International Conference , 2009, Kuala Lumpur.

Fathi, Mohamad Syazli and Mirasa, Abdul Karim (2011) Establishment and development of IBS in Malaysia. In: International Building and Infrastructure Technology Conference (BITECH 2011), 7-8 Jun 2011, Penang, Malaysia.

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia (2006) Context awareness in construction management - key issues & enabling technologies. In: Proceedings of The Joint International Conference on Construction Culture, Innovation and Management (CCIM), In Mohammed Dulaimi (Eds.) , 26-29 November 2006, Dubai, UAE. (Submitted)

Ghahramanpouri, Amir and Sedaghatnia, Sepideh and Lamit, Hasanuddin and Abdullah, Ahmad Saifuddin and Rasidi, Mohd. Hisyam and Rosley, Muhamad Solehin Fitry (2015) The vitality of a pedestrian street in Johor Bahru City. In: International Joint-Conference of SENVAR-INTA-AVAN- SIA2015, 24-26 Nov, 2015, Johor Bahru, Malaysia.

Gharakhani, Alireza and Sediani, Eka and Khan, Tareef Hayat and Sabzevar, Hadi Bagheri (2013) Use of natural ventilation in Malaysia's future green housing. In: 3rd International Conference on Green Buildings Technologies and Materials, GBTM 2013, 21-22 Dec, 2013, Kuala Lumpur, Malaysia.

Ghazali, Norasraf and Hamzah, Amran (2014) Preserving the uniqueness cultural landscape in Setiu Wetlands. In: International Conference on Urban and Regional Planning (ICURP) 2014, 9-11 May, 2014, Skudai, Johor.

Heng, Christopher Y. S. and Ossen, D. R. and Lim, Y. W. (2015) Daylight performance through different types of glazing in the tropics. In: SENVAR-INTA-AVAN 2015, 24-26 Nov, 2015, Johor Bahru, Malaysia.

Hussain, Afifuddin Husairi and Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Che Ani, Adi Irfan and Mohd. Ali, Zarina (2015) Examining the Challenges for the adoption of Building Information Modelling (BIM) in Malaysia from clients’ perspective. In: 4th International Conference on Engineering Business Management, 22-23 August, 2015, Kuala Lumpur, Malaysia.

Ismail, Syuhaida and Zakaria, Zarabizan (2015) Best practices of contract management approach towards excellent service culture in construction project. In: Mesyuarat Pegawai Kanan JKR 2015, 8-10 Jun, 2015, Johor Bahru, Johor.

Leng, Pau Chung and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Hamid, Malsiah (2014) Implementation of solar chimney in orang asli settlement in Bukit Lagong Selayang. In: 5th International Graduate Conference on Engineering, Science and Humanities 2014, 19-21 August, 2015, Skudai, Johor.

Lim, Yaik Wah and Kafashian, Zahra (2015) Better daylighting to improve energy efficiency of existing buildings using building modelling case: Qazvin Construction Engineering Organization (QCEO), Iran. In: UM-COHAS International Conference 2015, 3-4 August, 2015, Kuala Lumpur, Malaysia.

Lim, Yaik Wah and Shahsavari, Fatemeh (2015) Green-bim template (GBIMT) for sustainable building massing and planning in tropical climate. In: UM-COHAS International Conference 2015, 3-4 August, 2015, Kuala Lumpur, Malaysia.

Lim, Yong Long (2015) Sungai Buloh settlement - past, present and future. In: The 1st International Symposium on the Preservation of Heritage and Collective Memories of Communities Affected by Leprosy, 14 August, 2015, Kuala Lumpur, Malaysia.

M., Abedi and M. S., Fathi and M. F. , Mohammad (2011) Major causes of construction delays under client category and contractor category. In: The First Iranian Students Scientific Conference in Malaysia, Apr 9 & 10, 2011, UPM, Malaysia. (Submitted)

M., Abedi and M. S. , Fathi and M. F., Mohammad (2011) Effects of construction delays on construction project objectives. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia. (Submitted)

Majid, M. Rafee and Jaffar, Abdul Razak and Che Man, Noordini and Vaziri, Mehdrad and Sulemana, Mohamed (2015) Mapping poverty hot spots in Peninsular Malaysia using spatial autocorrelation analysis. In: 13th International Congress of Asian Planning Schools Association (APSA), 12-14 August, 2015, Skudai, Johor.

Majid, Mohammad Rafee and Johar, Foziah and Nordin, Alia N. (2012) Neighbourhood design and Vmt: is Malaysia planning to achieve the spirit of new urbanism? In: The Association of European Schools of Planning 26th Annual Congress (AESOP 2012), 11-15 Jul 2012, Ankara, Turkey.

Majid, Mohammad Rafee and Nordin, Alia N. and Johar, Foziah and Tifwa, H. Y. (2013) Travel emission profile of Iskandar Malaysia neighbourhoods from pre-1980s to 2000s. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Mansur, Shaiful Amri and Mohamad Zin, Rosli and Sea, E. N. (2006) Impact of unplanned schedule compression on project cost. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Marsono, Abdul Kadir and Md. Tap, Masine and Ng, Soon Ching and Makhtar, Ahmad Mahir (2006) Simulation of Industrialised Building System components production. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Marsono, Abdul Kadir and Lee, Siong Wee (2006) Nonlinear finite element analysis of reinforced concrete tube in tube of tall buildings. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamad Yatim, Yahya (2012) Optimum escape routes designs and specification for high-rise buildings. In: 3rd International Conference in Construction Industry Proceeding 2012, 10-11 April, 2012, Padang, Indonesia.

Mohamed, Sarajul Fikri and Mong, S. G. and Misnan, Mohd. Saidin (2016) Key characteristics of effective building maintenance and management by local authority in Malaysia. In: International Graduate Conference on Engineering, Science and Humanities, 15-17 Aug, 2016, Johor Bahru, Malaysia.

Mohammed, Miswan @ Abdul Hakim (2012) Critical success factors on implementing life cycle cost in the construction industry. In: Conference.

Mohd. Amir, Ahmad Syahid and Tareq, Mohammad Ali (2015) Apples to oranges: harmonising home buyer preferences in Japan and Malaysia through standards comparison. In: International Conference on Sustainability Initiatives (ICSI) 2015 in Conjunction With 8th Asean Environmental Engineering Conference (AEEC), Kuala Lumpur, Malaysia, 24-25 August 2015, 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Mohd. Fuza, Zatul Iffah and Ismail, Hairul Nizam and Mohd. Isa, Sulaiha (2015) Divulging the challenges faced by urban based tour operator in Malaysia. In: 13th International Congress of Asian Association - APSA 2015: Towards an Asian Urban Agenda, 12-14 August, 2015, Johor Bahru, Malaysia.

Mohd. Nasira, Siti Rashidah and Abd. Majid, Muhd. Zaimi (2006) Project cost performance forecasting system. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Yusof, Mohd. Fadil and Ismail, Hairul Nizam (2015) The evolvement of brand identity of Langkawi Island, Malaysia. In: 13th International Congress of Asian Planning School Associations 2015 - Towards an Asian Urban Agenda, 12-14 August, 2015, Johor Bahru, Malaysia.

Mudiyono, Rachmat and Md. Nor, Hasanan and Ling, Tung Chai (2006) The effect of joint width between blocks in concrete block pavement. In: Regional Postgraduate Conference on Engineering and Science (RPCES 2006), 26th - 27th July 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Mustaffa, Nur Emma and Ali, Kherun Nita and Yong, Vee Cheong (2015) The integration of Building Information Modelling (BIM) in a relationship-based procurement method. In: Seoul International Conference on Engineering and Applied Sciences 2015, 8-10 Jan, 2015, Korea.

Ng, Weng Seng and Md. Yusof, Aminah (2006) The success factors of design and build procrement method: a literature visit. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Rafieizonooz, Mahdi and Salim, Mohd. Razman and Khankhaje, Elnaz and Hussin, Mohd. Warid and Zarebidaki, Ali and Salmiati, Salmiati (2015) Determining the causes of delay by using factor analysis in Tehran’s construction projects. In: Applied Mechanics and Material, 2015.

Rasidi, Mohd. Hisyam and Jamirsah, Nurzuliza and Said, Ismail (2012) Urban green space design affects urban residents’ social interaction. In: AicE-Bs2012 Cairo ASIA Pacific International Conference on Environment-Behaviour Studies, 31 October-2 November 2012, Mercure Le Sphinx Cairo Hotel, Giza, Egypt.

Razak, Khamarrul Azahari and Yuen, Florence Sook Kuan and Mohamad, Zakaria and Razab, Razain and Mat Yusoff, Habibah Hanan (2015) Characterisation of post earthquake induced debris flow using airborne lidar data. In: Seminar Bencana Alam 2015 (Bencana 2015), 1-2 Dec, 2015, Sabah, Malaysia.

Rilling, Dirk and Saik, Han Siang and Soh, Hui Siang (2006) Thermal behaviour of residential buildings in South-East Asia through dynamic simulation. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Sabri, Soheil and Muhamad Ludin, Ahmad Nazri and Majid, Mohammad Rafee (2013) Ubiquitous geospatial concept in evolution of the macro and micro spatial planning. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Shafii, Faridah and Arman Ali, Zainab and Othman, Mohamed Zahry (2006) Achieving sustainable construction in the developing countries Of Southeast Asia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Shahsavari, Fatemeh and Lim, Yaik Wah and Eftekhari, Ali (2015) Integration of building information modelling (BIM) with green facade retrofit design in Malaysia. In: SENVAR-INTA-AVAN 2015, 24-26 Nov, 2015, Johor Bahru, Malaysia.

Shika, Suleiman Aliyu and Sapri, Maimunah and Jibril, D. J. and Abdullah, Shahabudin and Wakawa, Usman Bukar and Umar, Aminu and Umar, Usman Aminu (2013) Post occupancy evaluation sustainability assessment framework for commercial office buildings. In: International Congress on Interdisciplinary Behavior and Social Science, 2013.

Syed Darar, Sharifah Eisyahtun and Ismail, Hairul Nizam (2015) Tripographic assessment of VFR travel in context of Malaysian domestic travelers. In: 13th International Congress of Asian Planning Schools Association 2015: Towards and Asian Urban Agenda, 12-14 August, 2015, Johor Bahru, Malaysia.

Tey, Kim Hai and Lim, Shin Yee and Md. Yusof, Aminah and Chai, Chang Sa'Ar (2015) The implementation of construction cost index (CCI) in Malaysia. In: 9Th Asia Pacific Structural Engineering and Construction Conference (APSEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Tifwa, Hassan Yerima and Majid, Mohammad Rafee and Alaci, D. S. A. and Taiwo, Ogungbenro Mathew (2014) Estimating the values of wetlands in riparian communities: a tool for decision-making in planning. In: The International Conference on Urban and Regional Planning 2014 (ICURP2014), 9-11 May, 2014, Skudai, Johor.

Wan Ibrahim, Wan Yusryzal and Muhamad Ludin, Ahmad Nazri (2014) Spatiotemporal land use change analysis using open source GIS and web based application. In: International Conference on Urban and Regional Planning 2014: Planning in an Uncertain World, 9-11 May, 2014, Skudai, Johor.

Wan Kassim, Sharifah Athirah Izyan and Majid, Mohammad Rafee (2014) Of land use mix, location and travel carbon emission: state of the relationship in neighbourhoods of Iskandar Malaysia. In: The International Conference on Urban and Regional Planning 2014 (ICURP2014), 9-11 May, 2014, Skudai, Johor.

Yuhaniz, Mayamin and Mohd. Jusan, Mahmud (2016) The role and activities of Malay housewives and their influence on housing design preferences. In: Procedia Social and Behavioral Sciences, 25-27 Apr, 2015, Jakarta, Indonesia.

Yusuf, G. A. and Mohamed, S. F. and Yusof, Z. M. and Misnan, M. S. (2013) Adoption of standard based pricing method for the procurement of mechanical and electrical engineering services in Malaysia. In: Lecture Notes In Engineering And Computer Science.

Yusuf, G. A. and Mohamed, S. F. and Yusof, Z. M. and Misnan, M. S. (2013) Role of building services quantity surveyors in managing cost of green buildings. In: Advanced Materials Research.

Zakaria, Mohd. Azuan and Kubota, Tetsu and Toe, Doris Hooi Chyee (2015) The effects of courtyards on indoor thermal conditions of chinese shophouse in Malacca. In: The 9th International Symposium on Heating, Ventilation and Air Conditioning and the 3rd International Conference on Building Energy and Environment (ISHBAC-COBEE 2015), 12-15 June, 2015, China.

Zakiyudin, Mohd. Zulakhmar and Fathi, Mohamad Syazli and Rambat, Shuib and Mohd. Tobi, Siti Uzairiah and Rajab, Nor Aini (2015) A pilot study of user-requirements for building maintenance systems in Malaysian higher education institutions. In: Applied Mechanics And Materials, 2015.

Zakiyudin, Mohd. Zulakhmar and Fathi, Mohamad Syazli and Rambat, Shuib and Tobi, Siti Uzairiah and Rajab, Nor A’ini (2015) The user requirements for building maintenance management systems in Malaysian public universities. In: The Second International Conference on Construction and Building Engineering (ICONBUILD2015), 11-13 August, 2015, Indonesia.

Book

Abdul Rashid, Rosli (1996) Pengenalan ukur kuantiti binaan 1. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0028–9

Abdullah, Fadhlin (2004) Construction industry & economic development: The Malaysian scene. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0333-4

Mohammed (Penterjemah), Abdul Hakim and Bentley, J. I. W. (1990) Penenderan dan penganggaran binaan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–07–X

Shamsuddin, Shuhana and Sulaiman, Ahmad Bashri and Lamit, Hasanuddin and Omar, Rozeyta and Abd. Aziz, Norsiah and Md. Noor, Masliyana (2007) Kompendium perancangan dan reka bentuk kampus kondusif. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0446–3

Thesis

A. Bakar @ Md. Talib, Yusof (2003) Kajian penggunaan kaedah penjadualan kerja oleh pihak klien di dalam projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Saleh, Ahmed Abubaker (2014) Common contractual issues faced by Malaysian contractors operating in Middle East using FIDIC form of contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ab Rahim, Ainul Rasyidah (2008) Implementation's issues and problems commissioner of building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ab. Wahab, Mohd. Saupi (2004) Project Success factors for design-build system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Aziz, Mohd. Azmi (1996) Analisis risiko anggaran kos bangunan perumahan diperingkat tender. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Gahni @ Abd. Ghani, Zulazhar (2013) The readiness of transit oriented development in Nusajaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Hamid, Saiful Azhar (2013) The exclusion clause in government standard form of construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Jalil, Ahmad (2014) Defects in construction and the temporary disconformity principle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Nazir, Mohd. Zhafri Jamil (2013) Meshfree formulation for inverse frequencies analysis incorporating artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Wahida (2002) Analisa kos bagi projek sekolah secara reka dan bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Ghani, Hafizan (2008) Contractor's liability under clause 18.0 of PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Ghofar, Hasfar Syazwani (2016) Defining the types of veranda uses in a tropical urban context of Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Hamid, Mohd. Fairuz (2007) The effect multiple lightning impulse on the electrical breakdown voltage insulation resistance and isolation capacitance characteristics an opto-isolator as a low voltage surge protective device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Hamid, Suziana (2011) Tendering contract : breach by the employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Jalal, Muhamad Fikri (2008) Awareness of noise hazard from construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rashid, Lina Nazihah (2010) The admissibility rules of the expert evidence given by the expert witness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rashid, Rosmalina (2012) Destination images and key factors influencing tourists' decision making visiting Sabah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Wahid, Hayati (2011) Loss and/or expense claim in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Ahmad Amzar (2012) Placeness bagi pasar besar dan bazar di Kampung Jawa Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Ar Samsiah (2014) Method of assessing concurrent delays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Ikmalzatul (2013) Effects of envelope color and heat insulation on building thermal performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Mohammad Firdaus (2012) Contractor's standard of duty for design in traditional contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abu Bakar, Abdol Fattah (2004) Peranan perunding pengurusan projek (PMC) dalam perlaksanaan projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Mohamad Noor Ropiah (2008) Punca dan impak perubahan kerja dalam projek milik UDA Holdings Berhad (UDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Norazlin Nadia (2009) Kepentingan teknologi sistem pembinaan berindustri (IBS) dalam mempertingkatkan keberkesanan projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Siroh, Nurul Hayani (2012) Payment of architects' fees on termination of services. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Adamu, Samaila (2010) The implication of express provision for termination of contract due to nonpayment by employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Adebayo, Ibrahim Hussein (2013) Adopting lean management in Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Noor Azizah (2008) Challenges for improving the quality of the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Affandi, Marwan (2004) Energy saving in an air-conditioning system using an inverter and a temperature-speed controller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahankoob, Alireza (2013) Selection of material suppliers by the contractors in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Azahar (2000) Model statistik dalam strategi menender. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Mohd. Syafei (2011) Responsibilities of contractors in engineering procurement constructions (EPC) contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad Termizi, Ezatul Sharida (2013) Estimate in formation of construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmadnia, Behzad (2010) Apartments ownership and maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Abtidon, Abdi Aziz (2014) Pivotal factors influencing the performance of construction projects in Mogadishu city, Somalia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Memon, Zubair (2000) Excusable delays in construction (A case study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al Sayem Khan, Muhammed Abdullah (2013) Indoor thermal comfort of three garment factories in Dhaka, Bangladesh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alashwal, Ali Mohammed (2006) Optimizing production line of IBS by using simulation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alerasoul, Sepehr (2013) Consultancy services in the Middle East construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Ahmad Zaki (2008) Causes and steps to minimize variations in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Bakra, Tareg Ramadan (2009) Choice and familiarity of using corridor and spill over space in urban centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ali Naji Al-Attabi, Ali Mohammed (2014) Life cycle costing of industrialized building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Zoubi, Ali Houssein (2014) Simulation of assembly of components for industrialized building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alih, Suzana C. (2014) Corporate social responsibility practices by public limited construction firms in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alwerfally, Rehab M. O (2014) Risk assessment for construction supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amin, Rasoulijavaheri (2013) The requirement for implementation of open building system in terrace houses in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amir, Ahmad Aza @ Azhar (2010) The degree of performance in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Amir Mohamed, Sharil Amran (2013) Management of variation order in Public Work Department Malaysia construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arjinan, Sangeetha (2014) Risks in the PAM 2006 standard form of contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Asmi, Ade (2008) Knowledge areas and information technology infrastructure capabilities in relation to construction project performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Asri, Afiqah Ziela (2013) Squatter houses in the area of Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ayokunle, Omoyola Tolulope (2015) The effect of balcony on thermal performance of high rise office building in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azmi, Afisza Irfan (2009) Contractor's application of extension of time in PAM 1998. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azmi, Siti Haizan (2009) Feasibility of adopting minor building works agreement in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bakhary, Nor Azmi (2003) Arbitration in construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Barakat, Elhadi Badawi Mahgoub (1998) Properties and performance characteristics of liquid desiccant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Belayutham, Sheila (2004) Kerja pembaikpulihan bangunan makmal komputer sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bokhari, Normansah (2004) Pembaikan kerosakan dalam tempoh kecacatan : kajian kes : Jabatan Kerja Raya Daerah Kota Tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bong, Shirley Hui Ching (2002) Kecuaian profesional : peranan insurans indemniti profesional dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Brahim, Juliana (2012) The profile of supplement agreement law cases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Buniya, Mohanad Kamil (2014) Reverse logistic for industrial building system construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Chang Sa'ar (2009) Dispute management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Yun Ooi (2011) Residential street width and fire engine accessibility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chan, Ching Yeng (2006) Pemulihan projek perumahan terbengkalai di Selangor dan cara mengatasinya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chan, Donald Bing Tee (2002) Garis panduan kemasukan penjadualan projek sebagai dokumen sah dalam dokumen kontrak dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Hun Beng (2000) Fire-damaged structures, rebuilt or reinstate? - factors for decision : (a case study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Nam Onn (2012) Joint venture agreement in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Nu, Nur Farahah (2008) Contractor right of action against architect or engineer for negligence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Omar, Nurul Iqlima (2016) Penilaian pencapaian piawaian perancangan bekalan air bagi perumahan terancang di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che On, Shahrul (2014) Thermal performance of potted plants in mitigating indoor temperature in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chiew , Seng Khoon (2004) Control of materials on site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chin, Kean Voon (2010) Employer's right of set-off in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chin, Kuie Too (2001) Identifying and measuring of factors affecting labour productivity for brickwork on construction site in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ching, Chen Leng (2016) Principles of assignment on accrued causes of action. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chong, Ka Fung (2008) Collaborative site monitoring system for construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Oi Siang (2011) Wrongful termination of contract in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chong , Voon Yaw (2004) A study of problems during construction stage for conventional housing project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chua, Huwi Huwi (2001) Facilities management of intelligent building : developing an application model in the management of intelligent building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chua, Soon Chiang (2001) Kajian awal tindakbalas dinamik angin ke atas bangunan tinggi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chua , Tee Khoon @ Chua Yong Peng (2004) Critical factors that influence the success of implementing value management in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chung , Keat Wei (2004) Information management to integrate cost and schedule for infrastructure projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dabo Baba, Hammad (2010) Building information modeling in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dahlan, Ahmad (1999) Implementing total quality in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Denan, Zuraini (1999) Assessment and modification of daylight prediction and estimation tools for Malaysian practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ding, James Tse Wen (2015) Interpreting contractual provision: extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

El Rahman Gouda, Hamdy Abd. (1999) Performance of structural wood column exposed to fire (Volume I : Text). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Esam, Asrul Affandi (2000) Kajian kes : penilaian terhadap kos tidak wajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Estahbanati, Seyed Reza Morsheidi (2014) Feasibility for singular sustainable building indicator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faghirinejadfard, Amir (2014) Economic comparison of industrialized building system with conventional system through cost estimation using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gan, Gilbert Siang Yang (2015) Contractor's implied duty to warn design defects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ganjbakhsh, Hamed (2010) Building performance diagnoses using post occupancy evaluation for low energy office building practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghavami Rad, Farzan (2013) Global warming potential of building demolition activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghomi, Saeid Khalili (2013) Building information modeling in planning and scheduling phase in Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Keng Chai (2003) Maintenance management problems in low-cost flats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Golizadeh, Hamed (2013) Predicting the required duration for construction activities using Artificial Neural Networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Golzarpoor, Hamed (2010) Application of BIM in sustainability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gong, Xiaoye (2010) The meaning of community cultural tourism on minority host women : a case study of Lugu-Lake, Mosuo and Dai Minority Tribes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Goodarzi, Maryam (2012) The role of pulic participation in developing the urban park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Gouda, Hamdy Abd El Rahman (1999) Performance of structural wood column exposed to fire (Volume II : Appendices). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

H. Alrawi, Fatin Faris (1998) Modern and innovative structural systems : behaviour of framed buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamidi, Behzad (2010) A green cost allocation model for office and commercial buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, Azman (2010) Standard of proof on fraud in civil proceedings and voidable construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Haron, Ahmad Tarmizi (2004) Faktor kejayaan kaedah reka dan bina : kajian terhadap kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Ayob (2002) Pengurusan asap di dalam atrium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Maizon (1999) The effects of procurement methods on performance of construction projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Mohamad Zaki (2002) A thermoeconomic analysis for home air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hedayati, Ali (2014) Identifying the barriers in the development of building information modeling in construction engineering and management of educational systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heng, Robert Wei Kiong (2009) Variation orders in design and build contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hiew, Fong Poh (2010) Pre-award interest in construction arbitration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hosseini, Mohammad Mahdi (2012) Termination of construction contracts by employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hosseinpour, Emad (2013) Flexural behavior of steel reinforced brick beam utilizing interlocking brick system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Husain, Adnan (1997) Investigation of thermal comfort in factory environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussein, Sharisa (2013) Architect's duties in relation to supervision of construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussin, Natasha Azim (2014) Factors influencing the successful implementation of crime prevention through environmental design program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hwang, Chee Leong (2002) Hazards in construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hye Mian, Md. Abdul (1998) Using numerical techniques for predicting the fire resistance of steel column, during fire. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Suhaini (2015) Hubungan jaringan antara perusahaan kecil dan sederhana industri pelancongan di Kampung Cherating Lama, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Indra, Indra (2000) Kaedah pengawalan kos projek binaan yang diamalkan oleh kontraktor di Sumatera Barat Indonesia : kes kajian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Che Mimi Suriyani (2014) Behavioural characteristics of precast beam to column connections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Kamarul Sufwatun (2010) "Reasonable skill and care" in the professional consultant's duties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Maslie Ikran (2008) The validity of determination by insolvency clause in Malaysia standard form of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Mohd. Affendi (2013) Weight age factor for Malaysia green highway assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Neza (2004) Design considerations, practices and problems : a survey of private consultant firm perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jagar Singh, Bachan Singh Besawa (1999) The procurement and management for roof maintenance at Universiti Teknologi Malaysia, Skudai, Johor : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaluddin, Nur Fateha (2013) A study on comparison between solar cooling system and conventional cooling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaludin, Khairul Saleh (2008) Perlaksanaan konsep bina-kemudian-jual (BKJ) ke arah meminimumkan bilangan projek perumahan terbengkalai di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jamil, Mas Hafizah (2010) Uberrimae fidei in construction insurance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Janardhanan, J. Vijay (2004) Pengubahsuaian rumah di Daerah Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Javidi, Behdad (2013) The relationship between the peripheral buildings and public square character in the case study of Stadthuys Square in Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jivai, Julviati (1999) Masalah sistem pengurusan projek binaan di Sumatera Barat Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kadir, Kaidir (1997) Kajian prestasi pam haba dan penjimatan tenaga sistem penyaman udara domestik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kalatehjari, Roohollah (2013) An improvised three-dimensional slope stability analysis based on limit equilibrium method by using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamaruzaman, Siti Huda (2011) Risk in construction contractual term and condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kamsah, Nazri (1988) Development of an apparatus for the measurement of thermal conductivity of building materials. Masters thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Kasim, Narimah (2000) Integrating construction sheduling and knowledge-based systems for generating material scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Keyvanfar, Ali (2013) Adaptive behavior satisfaction index analysis framework for energy efficient building assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

King, Adrain Tzee Yang (2002) Integration of sheq management system in construction field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koh, Heng Boon (2000) Kerjabata galas beban sebagai kaedah rekabentuk alternatif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kolop, Roslan (2001) The block properties and structural behaviour of loadbearing interlocking hollow cement block systems manufactured using mobile block machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ku Ismail, Ku Adenan (2004) Recovery plan strategy on the delay construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Laily Roslan, Rose Diyana (2010) Brick material for construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lau , Guan Heng (2004) Construction coordination activities in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Shiau Mei (2007) Judicial interpretations on the phrase 'regulary and diligently' in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Sze Yin (2010) Contracting out of statutory provision in Malaysian construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Teck Shin (2014) Outrigger system for interconnecting three dimensional multi-stories buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee , Chin Heng (2004) Just-in-time management of precast concrete building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Leong, Mei Wan (2010) Contractor's liability relating to defective works that are discovered after the defects liability period. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Leong, Shiang Chin (2003) Procurement method as conflict and dispute reduction mechanism for construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Li Ming (2009) Time essence and termination in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew , Eric Cheok Fai (2004) Implementation of microsoft project to improve conventional construction reporting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Kar Sing (2012) Corrosion study on X70-carbon steel material influenced by soil engineering properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Siong Kang (2008) Engineering properties of resin grout as concrete repair material. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Siong Kang (2002) Pengurusan penyelenggaraan dan pembaikpulihan struktur bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Wan Wei (2010) Construction insurance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lim , Chee Yang (2004) Coordination in construction industry : a study on factors leading to success and failure of it. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Oliver Hoon Leh (2001) Kajian kualiti alam sekitar perumahan di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loo, Choo Beng (2002) Pemeliharaan bangunan warisan : kajian kes : Bandaraya George Town, Pulau Pinang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Loo, Jenny Shih Yein (2012) The profile of construction delay cases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

M. Nor, Hadzira (2010) Consolidation of arbitral proceedings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Maidin, Noraini (2010) Status of estimates for emergency work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Malin, Rusdy (1994) Penentuan keupayaan optimum tangki simpanan sejuk untuk loji pendinginan udara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mamat, Nor'Adila (2016) De minimis principle and certificate of practical completion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Martin, Anthony (2001) Reviewing the construction process using business process reengineering philosophy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marzoughi, Foad (2010) Making a decision model in construction companies regarding to weather risk by statistical method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Maskuriy, Raihan (2014) Application of BIM in early stage design cost estimation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Hassan, Marzuani (2007) Kajian pengurusan fasiliti pangsapuri dari aspek penyelenggaran perkhidmatan : kes kajian : Pangsapuri Pan Vista, Permas Jaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mat Isa, Siti Aisah (2014) Problems associated with evaluation of extension of time (EOT) claim in government projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Salleh, Maznida Shahila (2011) Kesedaran penyelengaraan fasiliti elektrik di sektor awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mazlan, Elis Mardzianah (2004) Kecacatan bangunan perumahan : kajian punca dan penyelesaiannya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Dalib, Md. Sazali (2013) Korean company practice in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Isha, Mohd. Nasir (2004) Evaluation on current practice in work breakdown structure approach for construction schedules. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Tamami, Ahmad Zulkepli (2002) Pemantauan dan permasaalahan perkhidmatan pembersihan secara outsourcing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Michael, Alabi Muyiwa (2013) The study of claims arising from building collapse. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Misnun, Mohd. Rozlan (2014) Application of interface management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moayedi, Farzaneh (2013) Consumer behavior on energy efficient cooling devices - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moghimi, Vahid (2013) Flexible windows as a mean of achieving user satisfaction in mass housing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad, Mardiana (2016) Factors affecting the preparation of the construction work programme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Azami, Destilla (2009) The power and authority to issue VS. to approve variation order : the legal perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Nazir, Noor Jannah (2016) Problems associated with acceleration works and its solutions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed, Rafiza (2002) Analisis faktor-faktor yang mempengaruhi perbezaan harga tender. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Kharoni, Roslee (2003) Aspek pengurusan berkualiti penyenggaraan bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed Sabli, Nor Azlinda (2003) Information exchange in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Nor, Norhaziyah (2011) The viability of online dispute resolution implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammed, Abdullahi Baba (2016) Assessment of public water distribution using geographic information system in Yola, Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohandes, Saeed Reza (2014) Fastening technology in construction for sustainability through building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohayidin, Noor Amalina (2014) Variation order in lump sum contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Ali, Darmawaty (2001) Sistem keselamatan data menggunakan algoritma twofish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Ali, Nor Raihana (2000) Analisis keberkesanan sistem pengurusan penyelenggaraan bangunan dalam memenuhi kepuasan dan keselesaan penyewa : satu tinjauan di Bandar Seremban. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Khalid, Mohd. Khairul (2014) Characterization of space charge in the solid insulating materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Khalid, Rozline (2004) Tahap kepuasan dan harapan klien terhadap pengurus projek masa kini. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Nasir (2010) Challenges in coordination process for tall building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Nazali (2002) Pembangunan pelan pengurusan krisis kebakaran di bangunan tinggi : kes kajian : Bank Industri & Teknologi Malaysia Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Nordin, Ahmad Ridhuan (2002) Perbandingan tempoh masa penyiapan projek. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Raid, Maryanti (2013) Kepentingan dan sumbangan taman atas bumbung dalam penilaian green building index (GBI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Raslim, Faraziera (2008) Differing site condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Ripin, Mohd. Yusri (2008) Payment issues of architect's professional fees. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Rodzi, Rodziana (2008) Faktor penghalang perlaksanaan pengurusan kualiti menyeluruh (TQM) menurut perspektif kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohd. Roshdi, Farrah Rina (2013) Challenges of quality assessment system (QLASSIC) in construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Said, Sorfina ‘Izzati (2014) Assessment of loss and expense for extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Sarman, Asmawan (2004) Sistem kontrak reka dan bina : analisa implikasi arahan perubahan kerja ke atas kos dan masa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shah, Zulkarnain (2000) The incorporation of maintenance requirements and planning at the design and construction stages : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sharifuddin, Roqiyah Nur (2015) Mutual termination agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yunos, Mohammad Harith (2015) The prevailing practice in deciding the practical completion of construction work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yunos, Mohd. Sharil (2002) Kriteria pemilihan kontraktor bagi projek rekabentuk dan bina : kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yusop, Imran (2010) Adjudicator determines own jurisdiction : a prediction for the proposed construction industry payment and adjudication act. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yusop, Imran (2010) Adjudicator determines own jurisdiction: a prediction for the proposed construction industry payment and adjudication act. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Zainal, Ahmad Mawardi (2008) Incorporating sustainable concept to improve architectural design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zin, Nurshafeeqah (2013) Comparison of collateral warranty and indemnity in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Moravveji, Mohammad Yousef (2013) Selection of the industrialized building material supplier by analytic hierarchy process method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mostafapour, Saman (2013) Assessment of value management by using earn value technique in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mousavi, Seyed Mohammad (2013) Environmentally- sustainable affordable design elements in housing : (A case Stydy on middle-income people in the context of Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muhamad, Pauziah (2002) An exergetic analysis of a home air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhammad Yuwono, Aditya (2011) Cost control in construction phase in joint operation contractors : a case study of joint operation contractors in Sumatera Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Munisamy, Thavarajah (2000) Contractors' approaches to risk indentification at the tendering stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nading, Nadiana (2015) Domestic tourist’s perception on Sarawak ethnic native’s food. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nasr, Ali Hadian (2014) Interconnecting outriggers system in tall building structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawi, Nur Muizzah (2013) Implementation of noise management in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nayan, Roselan (2010) Valuation of interim payment : contract terms and statutes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Chee Kuang (2010) Recovery of interest / financing charges due to prolongation in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Weng Seng (2001) Analysis of factors of non-excusable delays that influence contractors' performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Ying Keng (2003) Numerical simulation of air conditioned space. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngu, Heng Hoo (2002) Improving reporting system in construction industry using IT. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nguru, Adamu Ibrahim (2010) Resilience in tourism business (a case study of Cherating Lama Village, Pahang). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nik Abdullah, Nik Abdul Hafiz (2015) Application of good faith as necessary limits in exercising the termination for convenience clause. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Omar, Hartini (1997) Analysis of energy consumtion in building using 'SHEAP' (Simplified Hourly Energy Analysis Package). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Nur Shahirah (2010) Perlaksanaan Sistem Binaan Berindustri (IBS) bagi mengatasi masalah dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ooi, Poh Poh (2010) Profile of construction payment dispute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Osman, Noor Azahar (2008) Analisis kecacatan semasa pembinaan dan kualiti bangunan di celcom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Riduan (2011) Mengenalpasti punca-punca mempengaruhi siling runtuh di peringkat pelaksanaan dan pengawasan projek di bangunan kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Othman, Nur Syaheera (2013) Motivation and barrier factors of environmental management systems implementation in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pang, Sheh Haur (2004) The implementation of design and build procurement approach in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pison, Zirwatul Hana (2007) Managing construction of telecommunication tower projects in Celcom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Prakasya, Affan (1999) Strategi syarikat pembinaan dalam perbezaan iklim ekonomi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Prayetno, Eko (2013) Wing-in-ground for rescue operation in Kepulauan Riau. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rabiee, Asmaa (2013) The influence of the discord in building distinctivness on the perception of tehran’s city identity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rachmadi, Erwando (2011) Cost planning in water resources infrastructure maintenance project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahim, Nur Hapsah (2008) Direct payment to domestic subcontractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahmani, Behzad (2013) Effects of double skin facade configurations on decreasing solar heat gains in high-rise office buildings in the tropical climate of Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahmat, Maziar Ghabel (2013) Analysis of industrialized building system block work with ETABS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raja Mohd. Yazit, Raja Nur Syaheeza (2015) 'Third place' environment in residential school design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rakhshanifar, Mansooreh (2013) Health and safety in refurbishment projects involving demolition work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Mohamad Ali (2010) Application of six sigma philosophy for quality management system in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Raiha Azene (2015) Assessing loss and expenses claim by prolongation cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rashib, Rahmat (2003) Masalah penyiasatan tapak dan kesannya terhadap perancangan projek. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasiah, Kumarason V. (2004) Budaya keselamatan dalam pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasid, Nur Farah Farhana (2012) 'Best endeavours' for granting extension of time in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rastegar, Niloufar (2013) Effective parameters on street vitality in Johor Bahru City Center. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rayeg, Olivia (2009) Contractor's rights in the event of employer's insolvency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rezaeianpakizeh, Mohammad (2012) Structural system analysis and design for safe house. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Romli, Hajaratul Azila (2015) Delay in settlement of final account. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Saad, Sharima (2000) Kajian hubungan rekabentuk, fungsi dan kos kemudahan bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadeghpour, Mehrnaz (2013) Perception and attitude of Middle East tourists towards travel in Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sadry, Somayeh Roustaei (2014) Visual representation of nature in the library. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sahibudin, Shafika (2009) Contractor's liability as an occupier of site during construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Saidin, Aminuddin (2015) Claims for additional preliminaries costs due to project prolongation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sainee, Norazean (2015) Issues associates with communicating the architect notice by means of e-mail under PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salleh, Kamarul Zaman (2004) Penilaian keperluan kelayakan tambahan perunding pengurusan projek (PPP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Hazwani (2014) Wind effects on symmetrical multiple core wall system of high-rise building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Nur Jazlianna (2014) Profile of construction contractual claims. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sanusi, Intan Safina (2015) Termination procedures of projects by the public works department (PWD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sanusi, Saiful Rizan (2004) Tuntutan pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sarlati, Sogol (2013) Acoustic quality for classrooms in Faculty of Civil Engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seliman, Mohamad Syahmi (2016) Arbitration agreement in subcontract: incorporation by reference. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Senawi, Mohd. Yusoff (1999) Development of a building energy analysis package (BEAP) and its application to the analysis of cool thermal energy storage systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Senawi, Mohd. Yusoff (1992) Software development for building energy analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Seong, Pick Choong (2003) Refurbishment project management system for commercial highrise buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sera, Mardani Ali (2000) Effect of impeller geometry of a water cooling pump on engine cooling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Setiani, Yulia (2008) Construction site security management and control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shaffee, Nursuriani (2013) Complexity of the floral pattern in ventilation panel of timber building in Kelantan and Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shanmugam, Arvindran (2004) Monitoring and control methods for construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shoubi, Mojtaba Valinejad (2013) Building performance assessment in terms of energy consumption using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siew, Sik Nguong (2013) An evaluation of effectiveness of approximate quantity method in estimating construction cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sing, Annan Vessinuk (2013) Element of warranty of IBS structural system for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siow, Soon Choy (2010) Effectiveness of retention of little clause in Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sk. Abd. Razak, Sk. Muiz (2010) Blast resistance of tall buildings structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soh , Tun Sian (2004) Aspek keselamatan dan kesihatan di tapak bina : antara amalan dan peruntukan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sonda Parningotan, Sonda Parningotan (2012) A study of claims management for irrigation construction contract : case : Amandit Irrigation Sub-Project, South Kalimantan, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sondossi, Soroush (2013) Dynamic response prediction of steel frame structure considering semi rigid connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soon, Tan Kian (2010) Dispute resolution in relation to delay of construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Speri, Sharlini (2016) Manifestasi kek lapis Sarawak dalam proses pemerkasaan psikologi pengusaha wanita di Kampung Gersik, Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sulaiman, Khairunnizam (2010) Strategies for managing delay in Mara's building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suraji, Norlia Sofa (2013) Client perspective towards application of industrialised building system in private construction projetcs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syamsuri, Efni Uslinda (2004) Pemilihan sub-kontraktor menggunakan kaedah logik fuzzi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tafahomi, Rahman (2012) Deficiencies of urban design considerations in the urban development plan of Mashhad City. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Taherkhani, Roohollah (2013) Development of a social sustainability model in industrial building system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taib, Tahrina (2010) Efficiency in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tajul Ariffin, Hamizah Liyana (2007) Letter of intent and standard form of builiding contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tan, Chee Wei (2002) Behaviour of high-rise buildings under seismic effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Swee Kok (2010) Cost effectiveness comparison of pre-fabrication with conventional construction method for RMAF ground defense bunker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tang, Wai Keong (2002) Pengurusan kemudahan dan penyenggaraan bagi bangunan tinggi komersial di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tay , Miaw Sze (2004) Penggunaan portal K-constructions dalam penghantaran dokumen secara berelektronik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tazol Arrief, Nurulain (2013) Employer's implied obligation in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Teck Shin, Lee (2014) Outrigger system for interconnecting three dimensional multi-stories buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Beng Hock (2000) Reviewing the project delivery systems used in Malaysia Construction Industry : focus on the conventional method and the design and build method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Eng Tiong (2002) Kajian terhadap amalan penentuan produktiviti kerja dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Yeong Yih (2013) Pure economic loss in Malaysia's construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tham, Lian Yu (2003) ISO 9000 : 2000 quality standard - implementation and effectiveness in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Then, Frederick (2013) Energy efficiency technology in office and commercial buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Then, Lee Lian (2010) Equitable remedy : specific performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Then, Lee Lian (2010) Equitable remedy: specific performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Thong, Jia Wen (2008) Reengineering of ISO 9001:2000 document management system compliance with construction inspection process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thoo, Hoi Hian (2002) Life cycle assessment of steel construcrtion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Titus, Olalekan Olaolu (2009) Notice of loss and/or expense claim in PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Toe, Doris Hooi Chyee (2009) Night ventilation technique for terraced houses in hot humid climate of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tuah, Mohd. Zaidi (2011) Use of discretion by contract principle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ungku Mohamed Tahir, Ungku Haslina (1997) Performance analysis of LiBr - H2O double effect gas fired absorption chiller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

W. Mohd. Shaupil, W. Mohd. Haniff (2008) Remoteness of damage in breach of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Ahmad, Wan Azlan (1996) An analysis of the commonwealth courts decisions on liabilities of construction professionals with special reference to post-completion claims. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Hamdan, Wan Samsul Zamani (2004) Design & build as project delivery system : the potential application in Bank Pembangunan & Infrastruktur Malaysia Berhad (BPIMB) factory complex's development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Mohamed Rashdi, Wan Shahrizatul Suraya (2016) The effect of building form on cooling load in hot and humid climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wong, Bi Xia (2009) Measure of damages for defective building work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wong, Chin Liang (2010) The efficiency and effectiveness of building maintenance for College Tun Hussein Onn (KTHO), Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Keng Lian (2000) Construction risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yadollahi, Mohammadreza (2013) Budget allocation management model for seismic rehabilitation of infrastructure assets. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yahya, Khairulzan (2002) Penilaian terhadap keupayaan model rangkaian neural bagi meramal permintaan rumah kos rendah kawasan bandar di Negeri Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yan, Yen Qun (2015) Aquaponic system for self-sustain living. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yap, Jeffrey Boon Hui (2003) The study of the effectiveness of design and build (D&B) procurement method in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap, Poy Yee (2010) Judicial interpretations on "error of law on the face of arbitration award". Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yatiman, Noor Ain (2014) Affordances of home-school journey as a play and learning environment for rural middle childhood children. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yazid, Nurul Amirah (2016) Domestic visitor travel perception in determining destination image of Kota Tinggi District, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yeap, Ming Keong (2003) A study on implementing total quality management (TQM) in the construction industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yusoff, Zaharah (2009) Employer's recovery of payment caused variations due to designers negligence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zainal Abidin, Mohd. Kamarul Izwan (2008) The causes and impact of poor construction documentation in construction organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainul Amri, Haidar Akma (2010) Failures of roof structures caused by wind uplift forces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Intan Bayani (2010) Arbitrator’s jurisdiction to resolve disputes relating to allegation of fraud. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zakaria, Rozana (2001) Masalah komunikasi dalam pengurusan projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Wan Zahran (2013) Executive information system for monitoring building construction work progress. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulherman, Zulherma (2012) Keberkesanan polisi kelulusan membina bangunan di Kota Padang, Sumatera Barat Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkernain, Mohamad Safwan Saifuddin (2016) The visual pattern of pedestrian connectivity to the informal eating places in Jalan Ampang, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkifli, Siti Salwa Ashikin (2016) Frustration of contract due to abnormal increase of price in Malaysia legal perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

This list was generated on Wed Nov 22 03:42:34 2017 +08.