Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TH Building construction"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 948.

A

Aminudin, Nurul Huda (2011) The study on the implementation of design and build projects in DID. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

A. Bakar @ Md. Talib, Yusof (2003) Kajian penggunaan kaedah penjadualan kerja oleh pihak klien di dalam projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. M., Adnan and M. S., Fathi (2012) A review of value creation from procurement contracts and business models for district cooling systems in Malaysia. In: 8th Asia Pacific Structural Engineering and Construction Conference (APSEC), October 2-4, 2012, Shangri-La, Surabaya, Indonesia. (Submitted)

A. Saleh, Ahmed Abubaker (2014) Common contractual issues faced by Malaysian contractors operating in Middle East using FIDIC form of contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ab Rahim, Ainul Rasyidah (2008) Implementation's issues and problems commissioner of building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ab. Azis, Shazmin Shareena and Sipan, Ibrahim and Sapri, Maimunah (2015) Malaysian awareness and willingness towards retrofitted green buildings: community. In: 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015, 7 May 2015 - 8 May 2015, Amsterdam, Netherlands.

Ab. Rahim, Nor Hayati (2009) Persepsi pemaju terhadap penggunaan IBS (Industrialised Building System). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ab. Rahman, Nur Hannani and Ab. Azis, Shazmin Shareena and Zulkifli, Nur Amira Aina and Baskaran, Shastitharran and Aziz, Nursyuhaida and Mat Salleh, Kamarulzaman (2023) COVID-19 standard operating procedure advancement for office building using indoor environmental quality elements. Planning Malaysia, 21 (3). pp. 347-368. ISSN 1675-6215

Ab. Rani, Nur Izzati and Preece, Christopher Nigel and Ismail, Syuhaida (2015) Globalization and liberalization in the Malaysian construction industry. In: 4th International Conference on Engineering Business Management (ICEBM 2015), 22-23 Aug, 2015, Kuala Lumpur, Malaysia.

Ab. Wahab, Mohd. Saupi (2004) Project Success factors for design-build system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abbas @ Ahmad, S. Zulifahalila (2004) Magnitud beban kerugian pemaju dalam pembangunan rumah kos rendah dan sederhana rendah : kajian kes : kawasan Majlis Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abd Jamil, Ahmad Huzaimi (2020) A building information modelling based on contractual framework for construction of building projects. PhD thesis, Universiti Teknologi Malaysia.

Abd Majid, Muhd. Zaimi (2013) Future building performance factors in regional development for energy efficieint travel plan. In: Asia Future Conference 2013 (AFC13), 2013.

Abd Majid, Muhd. Zaimi (2013) Investigation on future building performance factors towards energy efficient travel plan in regional development. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

Abd. Aziz, Hazlinda and Rasidi, Mohd. Hisyam (2013) Review on methodology of modeling green space network in urban landscape planning. In: Proceeding South East Asia Symposium (SEATUC 7th), 4-6 March, 2013, Bandung, Indonesia.

Abd. Aziz, Mohd. Azmi (1996) Analisis risiko anggaran kos bangunan perumahan diperingkat tender. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Gahni @ Abd. Ghani, Zulazhar (2013) The readiness of transit oriented development in Nusajaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Ghafar, Nor Hayati (2003) Sustainable housing : LFEA of precast frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Ghani, Azizul (2007) Perbandingan pembangunan perumahan berkonsepkan gated and guarded community mendatar dan menegak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Hamid, Saiful Azhar (2013) The exclusion clause in government standard form of construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Hamid, Hazlan and Makhtar, Ahmad Mahir and Awang, Abdullah Zawawi and Omar, Wahid (2002) Study on the behaviour of repaired reinforced concrete (RC) concrete elements. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Jalil, Ahmad (2014) Defects in construction and the temporary disconformity principle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Jamil, Ahmad Huzaimi and Fathi, Mohamad Syazli (2017) An overview of contract documents for building information modelling (BIM) construction projects. Journal of Advanced Research in Business and Management Studies, 7 (2). pp. 68-72. ISSN 2462-1935

Abd. Nazir, Mohd. Zhafri Jamil (2013) Meshfree formulation for inverse frequencies analysis incorporating artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Ahmad Baharuddin and Omar, Wahid (2006) Issues and challenges in the implementation of Industrialised Building Systems in Malaysia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abd. Rahman, Ahmad Baharuddin and Rais, Ahmad Zaidon (2005) The effects of diaphragm components in resisting lateral stability of precast concrete frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Ahmad Baharuddin and Saim, Abd. Aziz and Md. Tahir, Mahmood and Mohammad, Shahrin (2001) Analytical studies of the behaviour of semi-rigid non-sway frames with tubular columns. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Norhan and Kamaruddin, Samira Albati and A. Schrefler, Bernhard (2001) Numerical modelling of thermo-hydromechanical (THM) in deforming porous media for subsurface systems. Jurnal Teknologi B (34B). pp. 31-44. ISSN 0127-9696

Abd. Rahman, Wahida (2002) Analisa kos bagi projek sekolah secara reka dan bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Razak, Janatul Aziera and Rambat, Shuib and Che Ros, Faizah and Shi, Zhongchao and Mazlan, Saiful Amri (2021) Seismic vulnerability assessment in Ranau, Sabah, using two different models. ISPRS International Journal of Geo-Information, 10 (5). pp. 1-25. ISSN 2220-9964

Abd. Samat, Roslida (2008) The effectiveness of various structural system in reducing tall building response due to wind. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelhakim, Mesloub (2015) Glazing design for bilateral daylighting in public school classrooms in northern part of Algeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdelhakim, Mesloub (2019) Performance of office building integrated photovoltaic for windows under semi-arid climate in Algeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran (2011) Buckling behavior of general dome ends under external pressure, using finite element analysis. Key Engineering Materials, 471-47 . pp. 833-838. ISSN 1013-9826

Abdul Aziz, Zuraidah (2012) Comparing conventional to industrialised building system construction costing : a case study of school building projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Ghani, Hafizan (2008) Contractor's liability under clause 18.0 of PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Ghofar, Hasfar Syazwani (2016) Defining the types of veranda uses in a tropical urban context of Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Hadi, Aliff Azize (2022) Challenges in rescue project towards procurement method. Masters thesis, Universiti Teknologi Malaysia.

Abdul Hamid, Abdul Rahim and Abd. Majid, Muhd Zaimi and Singh, Bachan (2008) Causes of accidents at construction sites. Malaysian Journal of Civil Engineering, 20 (2). pp. 242-259. ISSN 1823-7843

Abdul Hamid, Hamdi and Abdullah @ Mohd. Asmoni, Mat Naim and Lokman, Muhamad Amir Afiq and Shaari, Nursyamimi (2015) An overview of the management commitment to safety elements for mitigating accidents in the construction industry. Jurnal Teknologi, 74 (2). pp. 1-8. ISSN 0127-9696

Abdul Hamid, Mohd. Fairuz (2007) The effect multiple lightning impulse on the electrical breakdown voltage insulation resistance and isolation capacitance characteristics an opto-isolator as a low voltage surge protective device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Hamid, Suziana (2011) Tendering contract : breach by the employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Jalal, Muhamad Fikri (2008) Awareness of noise hazard from construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Kadir, Mohd. Razif and Abdul Rahim, Ruzairi and Rahiman, Mohd. Hafiz Fazlaul and Mansor, Muhammad Saiful Badri (2011) Control door lock system via sms (short messaging system). In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 165-182. ISBN 978-967-354-185-0

Abdul Kadir, Munirah (2018) Framework to reduce variation processing time in public projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Latif, Abdul Hafiz (2022) Profiling of extension of time cases in Malaysian construction projects. Masters thesis, Universiti Teknologi Malaysia.

Abdul Latif, Muhammad Razif Shah and Samsudin, Salfarina (2022) Retirement villages development business model in Malaysia. International Journal of Academic Research in Business and Social Sciences, 12 (11). pp. 1399-1406. ISSN 2222-6990

Abdul Majid, Roshida and Leng, Pau Chung and Sanusi, Sani Maimagani (2022) Thermal performance of classroom block: a comparison of hobo datalogger and design-builder. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 224-237. ISSN 0128-1666

Abdul Majid, Roshida and Obinna, Cyril and Inikpi, Achoba Mercy (2022) Relationship between office factors and window view factors in shared room and open-plan offices. Journal Of Tourism, Hospitality And Environment Management, 7 (27). pp. 438-449. ISSN 0128-178X

Abdul Majid, Roshida and S. Alzahrani, Mohammed Abdullah and Karban, Abdullah Saeed (2022) Thermal performance of vertical shafts in buildings: an overview of efficient design parameters. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 218-223. ISSN 0128-1666

Abdul Malik, Mohd. Helmi Alsykran and Abdul Rahim, Ruzairi and Yunos, Yusri and Pusppanathan, Muhammad Jaysuman and Amari, Hudabiyah Arshad (2011) Automatic door lock system. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 149-160. ISBN 978-967-354-184-3

Abdul Rahim, Mlysha Nurshyla (2018) Indicators for transit oriented development (TOD) readiness in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rahim, Ruzairi and Sahlan, Shafizhuhaza and Kazemi, Mohammad Saeed (2011) Heat, smoke detection and other indicators of a fire. In: Progress in Process Tomography & Instrumentation System: Series 3/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 23-34. ISBN 978-967-354-180-5

Abdul Rahman, Mohd. Shahril and Adeyemi, Ifeoluwa Adedoyin and Adeyemi, Adegbenga (2022) Maintenance analytics for building decision-making: a literature review. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 127-138. ISSN 0128-1666

Abdul Rahman, Muhammad Zulkarnain and Razak, Khamarrul Azahari and Ishak, Nurliyana Izzati and Asmadi, Mohd Asraff (2015) Extraction and characterization of vegetation anomalies induced by landslides from airborne lidar data. In: Seminar Bencana Alam 2015 (Bencana 2015), 1-2 Dec, 2015, Sabah, Malaysia.

Abdul Rahman, Redzuan (2006) Significant usage of slab and wall form technique in industrialised building systems (IBS) for low cost highrise apartments construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rashid, Lina Nazihah (2010) The admissibility rules of the expert evidence given by the expert witness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rashid, Rosli (1996) Pengenalan ukur kuantiti binaan 1. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0028–9

Abdul Rashid, Rosmalina (2012) Destination images and key factors influencing tourists' decision making visiting Sabah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Razzaq, Abdul Rasid (2014) Pengupayaan komuniti dan kelestarian pembangunan pelancongan di Miso Walai Homestay Kinabatangan, Sabah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Wahid, Hayati (2011) Loss and/or expense claim in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, A. and Thai, O. B. (2006) Personal digital assistants as a mobile inspection system at construction site. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdullah, Arham and Sohaili, Johan and Azman, Azizul and Kassim, Mohamad Adam (2008) A methodological analysis of demolition works in Malaysia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Abdullah, Ahmad Amzar (2012) Placeness bagi pasar besar dan bazar di Kampung Jawa Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Ar Samsiah (2014) Method of assessing concurrent delays. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Fadhlin (2004) Construction industry & economic development: The Malaysian scene. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0333-4

Abdullah, Ikmalzatul (2013) Effects of envelope color and heat insulation on building thermal performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Mat Naim and Misnan, Saidin and Wan Mahmood, Wan Yusof (2008) A case study on quality management system in construction project. In: Quality Management System in Malaysian Construction Industry. Penerbit UTM, Skudai, Johor Bahru, pp. 36-63. ISBN 978-983-52-0588-0

Abdullah, Mohammad Firdaus (2012) Contractor's standard of duty for design in traditional contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah @ Mohd. Asmoni, Mat Naim and Mohammed, Abdul Hakim and Lee, Janice Yim Mei and Low, Sheau Ting (2015) Critical success factors of project quality management system for Malaysian construction industry. Jurnal Teknologi, 74 (2). pp. 123-131. ISSN 1279-696

Abdullah, Redzuan and Abd. Hamid, Hazlan (2006) An investigation on the feasibility of the use of dry floor system for low cost construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdullahi, Yahya and Embi, Mohamed Rashid (2015) Evolution of abstract vegetal ornaments in Islamic architecture. Archnet-IJAR, 9 (1). pp. 31-49. ISSN 1994-6961

Abdulrahman, Hamdi and Muhamad, Rahimah and Azim, Muhammad Fikril (2020) Tension stiffening behavior of ordinary Portland and geopolymer concrete: a review. In: 4th International Conference on the Science and Engineering of Materials, ICoSEM 2019, 26 August 2019 - 28 August 2019, Kuala Lumpur, Malaysia.

Abedi, Mohammad and Fathi, Mohamad Syazli and Muhamad Rawai, Norshakila (2012) A review of industrialised building system in Malaysian construction industry. In: Management in Construction Research Association (MiCRA), 2012, Kuala Lumpur, Malaysia.

Abidin, Asniah (2007) The profile of construction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abidin, N. Z. and Shahminan, R. N. R. and Ibrahim, F. K. (2017) Architectural influences of Istana Lama Seri Menanti, Negeri Sembilan. Planning Malaysia, 15 (1). pp. 151-162. ISSN 1675-6215

Abu Bakar, Abdol Fattah (2004) Peranan perunding pengurusan projek (PMC) dalam perlaksanaan projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Aniza (2008) Local labour : Prospects and challenges in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Mohamad Noor Ropiah (2008) Punca dan impak perubahan kerja dalam projek milik UDA Holdings Berhad (UDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Norazlin Nadia (2009) Kepentingan teknologi sistem pembinaan berindustri (IBS) dalam mempertingkatkan keberkesanan projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Norazreen (2011) Level of understanding the contract requirements of PWD 203A (Rev.2007) standard form of contract among the construction professional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abu Bakar, Nur Fatin Syazwani and Ismail, Syuhaida and Che Amat, Rohayah (2019) The long road to sustainable tunnelling works in the Malaysian construction industry: the past, present and future. TEST Engineering & Management, 81 (NA). pp. 867-875. ISSN 0193-4120

Abu Bakar, Siti Hawa and Muhammad Sukki, Firdaus and Freier, Daria and Ramirez Iniguez, Roberto and Mallick, Tapas Kumar and Munir, Abu Bakar and Mohd. Yasin, Siti Hajar and Abubakar Mas'ud, Abdullahi and Md. Yunus, Norhidayah (2015) Performance analysis of a novel rotationally asymmetrical compound parabolic concentrator. Applied Energy, 154 . pp. 221-231. ISSN 0306-2619

Abu Bakar, Zaradiah (2008) Challenges face by Malaysian contractors in international ventures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Naim, Zalina (2019) Impak pembangunan ekonomi terhadap komuniti tanah bencah Setiu, Terengganu. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abu Siroh, Nurul Hayani (2012) Payment of architects' fees on termination of services. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abubakar, Muhammad Jamil and Bandi, Shamsulhadi and Mohd., NorHazren Izatie (2021) Latent factors manifesting sustainable construction understanding. International Journal of Advanced Research in Engineering and Technology (IJARET), 12 (1). pp. 1029-1042. ISSN 0976-6480

Abubakar Ibrahim, Alkali and Ahmad, Mohd. Hamdan and Said, Ismail and Umar, Aminu Mahmoud (2015) Configuring a family friendly inpatient setting. Jurnal Teknologi, 77 (14). pp. 1-6. ISSN 1279-696

Adamu, Samaila (2010) The implication of express provision for termination of contract due to nonpayment by employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Adamu, Samaila (2017) Improving project delivery process using lean construction approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Adanan, Hadiatul Aida (2006) Client satisfaction on contractors' work performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adebayo, Ibrahim Hussein (2013) Adopting lean management in Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adeyemi, Ifeoluwa Adedoyin and Abdul Rahman, Mohd. Sharil (2020) A case for the inclusion of value management to building refurbishment projects. International Journal of Scientific and Technology Research, 9 (2). pp. 4738-4742. ISSN 2277-8616

Adi Maimun, Nurul Hana and Sapri, Maimunah and Ab. Azis, Shazmin Shareena and Mohd. Yusoff, Nurul Syakima (2020) Green buildings: a hype? In: 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019, 20 - 22 August 2019, Langkawi, Malaysia.

Adnan, Azlan and Meldi, Suhatril (2009) Derivation of attenuation equations for distant earthquake suitable for Malaysia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Adnan, Noor Azizah (2008) Challenges for improving the quality of the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Affandi, Marwan (2004) Energy saving in an air-conditioning system using an inverter and a temperature-speed controller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afrane, Ebenezer and Jaafar, Mohd. Nadzri and Ismail, Azizah (2023) Analysis of stakeholders' perspectives on barriers to affordable public housing implementation in Ghana. International Journal Of Academic Research In Business And Social Sciences, 13 (12). pp. 2713-2727. ISSN 2222-6990

Agboola, Oluwagbemiga Paul and Rasidi, Mohd. Hisyam and Said, Ismail (2017) The influence of open space utilization on residents' attachment with community: a case study of rural market square in southwest Nigeria. Archnet-IJAR, 11 (1). pp. 44-66. ISSN 1938-7806

Agboola, Oluwagbemiga Paul and Rasidi, Mohd. Hisyam and Said, Ismail and Zakka, Solomon Dyachia and Shuaibu, Abdul-Wahab (2016) Exploration of resident's social interactions in market square and its impact on community well being. In: 6th International Graduate Conference on Engineering Science and Humanities, 15-17 Aug, 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Aghaabbasi, M. and Moeinaddini, M. and Zaly Shah, M. and Asadi-Shekari, Z. (2017) A new assessment model to evaluate the microscale sidewalk design factors at the neighbourhood level. Journal of Transport and Health, 5 . pp. 97-112. ISSN 2214-1405

Ahankoob, Alireza (2013) Selection of material suppliers by the contractors in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Azahar (2000) Model statistik dalam strategi menender. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Imran and Abdullah, Norhayati and Koji, Iwamoto and Mohamad, Shaza Eva and Al-Dailami, Anas and Yuzir, Ali (2022) Role of algae in built environment and green cities: a holistic approach towards sustainability. International Journal of Built Environment and Sustainability, 9 (2-3). pp. 69-80. ISSN 2289-8948

Ahmad, Mohd. Hamdan (2020) Low carbon society blueprints and primitive attempts of green buildings of existing buildings. In: 3rd International Conference on Sustainability in Architectural Design and Urbanism, ICSADU 2019, 29-30 August 2019, Surakarta, Indonesia.

Ahmad, Mohd. Hamdan and Ariffin, Azman and Malik, Tasaduq Abbas (2013) Visualizing the application of GIS in transformation towards a sustainable development and a low carbon society. In: International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Ahmad, Mohd. Syafei (2011) Responsibilities of contractors in engineering procurement constructions (EPC) contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Supian and Doris Toe, Hooi Chyee (2008) Thermal comfort in existing terraced houses in Malaysia : energy saving strategies to reduce the use of airconditioners. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Ahmad, Yusof and Afgani, Eusoff @ Yendo and Saad, Hamid (2014) Rural transformation: a lesson learned from agropolitan development programs in Malaysia. In: International Conference Urban and Regional Planning (ICURP) 2014, 9-11 May, 2014, Skudai, Johor.

Ahmad Aljamal, Ahmad Jalal (2020) Building information modelling adoption in Jordanian architectural practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Ahmad Fauzi, Ahmad Faiz Azizi and Ali, Kherun Nita and Amirudin, Roslan (2019) Evaluating students readiness, expectancy, acceptance and effectiveness of augmented reality based construction technology education. International Journal of Built Environment and Sustainability, 6 (1). pp. 7-13. ISSN 2289-8948

Ahmad Fauzi, Ahmad Faiz Azizi and Ali, Kherun Nita and Mohd., Norhazren Izatie and Shukery, Nurshikin and Mat Dzahir, Mohd. Azwarie and Bandi, Shamsulhadi and Sunar, Mohd. Shahrizal (2022) CMAR: A conceptual framework for designing mobile augmented reality learning module for construction measurement. In: 13th EAI International Conference on Intelligent Technologies for Interactive Entertainment, INTETAIN 2021, 3 - 4 December 2021, Virtual, Online.

Ahmad Latiffi, Aryani and Brahim, Juliana and Mohd., Suzila and Fathi, Mohamad Syazli (2015) Building information modeling (BIM): exploring level of development (LOD) in construction projects. In: Applied Mechanics And Materials, 1-4 Dec 2015, Batu Pahat, Johor.

Ahmad Radzi, Ahmad Safuan (2005) The study of causes and effects of change order to engineering consultant practitioners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Termizi, Ezatul Sharida (2013) Estimate in formation of construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad Zaki, Shazwani and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria (2012) Construction skilled labour shortage the challenges in Malaysian construction sector. OIDA International Journal of Sustainable Development, 4 (5). pp. 100-108. ISSN 1923-6654

Ahmadnia, Behzad (2010) Apartments ownership and maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed, H. E. and Ahmed, M. I. and Yusoff, M. Z. (2012) Heat transfer enhancement of laminar nanofluids flow in a triangular duct using vortex generator. Superlattices and Microstructures, 52 (3). pp. 398-415. ISSN 0749-6036

Ahmed Abtidon, Abdi Aziz (2014) Pivotal factors influencing the performance of construction projects in Mogadishu city, Somalia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Memon, Zubair (2000) Excusable delays in construction (A case study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Memon, Zubair and Abd. Majid, Muhd. Zaimi and Mustaffar, Mushairry (2006) Digitalizing Construction Monitoring (DCM): an overview of Malaysian construction industry and proposing prototype software. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ahmed Memon, Zubair and Abd. Majid, Muhd. Zaimi and Mustaffar, Mushairry (2007) A systematic procedure for developing the 3D model to evaluate the construction project progress. Construction Innovation: Information, Process, Management, 7 (2). pp. 187-199. ISSN 1471-4175

Akinyode, Babatunde Femi and Khan, Tareef Hayat (2017) Consumers housing attributes in the context of their socio-economic background in ibadan urban centres. Journal of Applied Sciences & Environmental Sustainability, 3 (7). pp. 36-56. ISSN 2360-8013

Akinyode, Babatunde Femi and Khan, Tareef Hayat and Ahmad, Abdullah Sani (2015) Consumer decision making process model for housing demand. Jurnal Teknologi, 77 (14). pp. 59-69. ISSN 0127-9696

Akinyode, Babatunde Femi and Tareef, Hayat Khan (2016) Influence of estate agents and building plan approval cost on housing affordability in developing cities. OSR Journal of Humanities and Social Science (IOSR-JHSS), 21 (9). pp. 47-55. ISSN 2279-0837

Al Hafiz Mohd. Jamil, Mohd. Nur Iman (2012) Termination of contract : abandonment of work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Al Kalbani, Khalid and Abdul Rahman, Alias (2021) Appropriateness of Using CityGML standard version 2.0 for developing 3D city model in Oman. In: 5th International Conference on Smart City Applications, SCA 2020, 7 - 9 October 2020, Karabuk, Türkiye.

Al Sayem Khan, Muhammed Abdullah (2013) Indoor thermal comfort of three garment factories in Dhaka, Bangladesh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Al Sayem Khan, Muhammed Abdullah and Ahmad, Mohd. Hamdan and Hayat Khan, Tareef (2011) Indoor thermal condition of factory building in Bangladesh. DIMENSI - Journal of Architecture and Built Environment, 38 (2). pp. 55-62. ISSN 0126-219X

Alabi, Olumuyiwa Michael and Mustaffa, Nur Emma and Aminuddin, Farrah Azwanee (2023) A review on error-induced-building collapse at the construction stage in Lagos, Nigeria. In: International Graduate Conference of Built Environment and Surveying 2023, GBES 2023, 17 September 2023 - 18 September 2023, Hybrid, Johor Bahru, Johor, Malaysia.

Alaraji, Khwla A. M. H. and Mohd. Jusan, Mahmud (2015) Flexible house attributes as perceived by the end-users. International Journal of Applied Engineering Research, 10 (7). pp. 18313-18324. ISSN 0973-4562

Alashwal, Ali Mohammed (2006) Optimizing production line of IBS by using simulation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alerasoul, Sepehr (2013) Consultancy services in the Middle East construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alhaji Saba, Liman (2018) Sustainable construction materials and assemblies for Nigerian low cost housing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ali, Ahmad Zaki (2008) Causes and steps to minimize variations in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Faris Hyder and Bandi, Shamsulhadi (2021) Key dimensions of effort for building information modelling data creation. International Journal of Advanced Research in Engineering and Technology (IJARET), 12 (2). pp. 454-463. ISSN 0976-6480

Ali, Mohamad Azal Fikry and Saad, Hamid (2014) The function of rural service center in tourism activities. In: International Conferance on Urban and Regional Planning, 2014, 9-11 May, 2014, Skudai, Johor.

Ali, Mohamad Azal Fikry and Saad, Hamid and Johan, Muhamad Firdaus (2015) Rural service center availability in tourism facilities infrastructure at Malaysia special tourism zone. In: 6th RRPG International Conference and Field Study, 28-29 Sept, 2015, Indonesia.

Ali, Norizan and Ho, Chin Siong (2014) Solid waste management in Asian countries: a review of solid waste minimisation (3 ' r) towards low carbon. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Ali Bakra, Tareg Ramadan (2009) Choice and familiarity of using corridor and spill over space in urban centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ali Naji Al-Attabi, Ali Mohammed (2014) Life cycle costing of industrialized building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Zoubi, Ali Houssein (2014) Simulation of assembly of components for industrialized building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Idris (2006) Faktor-faktor kelewatan dalam projek pembinaan bangunan pendidikan MARA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Muhammad Khairol Anwar and Sabri, Soheil and Johar, Foziah and Karbassi, Zohreh and Majid, Mohd. Rafee and Muhamad Ludin, Ahmad Nazri (2014) A conceptual framework for development of public health oriented environment planning and design measures with focus on childhood obesity. In: International Conference on Urban Planning 2014: Planning in an Uncertain World, 9-11 May, 2014, Johor Bahru, Malaysia.

Alih, Suzana C. (2014) Corporate social responsibility practices by public limited construction firms in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Aliman, Izzah Zahin (2016) Doctrine of separability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Aliyu, Aisha Abdulkarim and Ismail, Alice Sabrina (2023) Influence of Islamic architecture on residential structures in the Hausa community. Journal of Islamic Thought and Civilization, 13 (2). pp. 48-69. ISSN 2075-0943

Aliyu, Mustapha and Muhammad Ludin, Ahmad Nazri (2014) Agricultural development in Nigeria: the constraints and potentials. In: International Planning on Urban and Regional Planning: Planning in Uncertain World, 9-11 May, 2014, Skudai, Johor.

Alizadeh, M. and Hashim, M. and Alizadeh, E. and Shahabi, H. and Karami, M. R. and Pour, A. B. and Pradhan, B. and Zabihi, H. (2018) Multi-criteria decision making (MCDM) model for seismic vulnerability assessment (SVA) of urban residential buildings. ISPRS International Journal of Geo-Information, 7 (11). ISSN 2220-9964

Alkali, Ibrahim Abubakar and Ahmad, Mohd. Hamdan and Said, Ismail (2014) The challenges of Nigerian hospital ward setting in providing for family participation. In: 4th International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2014, 24-25 May, 2014, China.

Alkali, Ibrahim Abubakar and Ahmad, Mohd. Hamdan and Said, Ismail (2014) The challenges of Nigerian hospital ward setting in providing for family participation. Applied Mechanics and Materials, 584-58 . pp. 142-151. ISSN 1660-9336

Almula, Thamir A. D. M. S. and Sharifi, S. and Sharifishourabi, Gholamali and Gohari, Soheil and Ayob, Amran and Yahya, Mohd. Yazid (2013) Static analysis of stitched sandwich beams with functionally graded foam core. In: International Conference on Advances in Mechanical Engineering 2013, ICAME 2013, 28 - 29 August 2013, Malacca; Malaysia.

Alsharafi, Amatalraof Abdullah Abdulwahed (2019) Biomimetics for passive air conditioned design for buildings in the hot arid regions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Alwerfally, Rehab M. O (2014) Risk assessment for construction supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amin, Rasoulijavaheri (2013) The requirement for implementation of open building system in terrace houses in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amir, Ahmad Aza @ Azhar (2010) The degree of performance in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Amir Mohamed, Sharil Amran (2013) Management of variation order in Public Work Department Malaysia construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amuda Yusuf, Ganiyu and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria and Misnan, Mohd. Saidin (2013) Towards developing building services standard method of measurement in Malaysia. In: 2nd International Congress on Interdisciplinary Behavior and Social Science, ICIBSoS 2013, 4-5 Nov,2013, Jakarta, Indonesia.

Amuda Yusuf, Ganiyu and Mohamed, Sarajul Fikri and Mohd. Yusof, Zakaria and Mohd. Saidin, Misnan (2014) Towards developing building services standard method of measurement in Malaysia. Recent Trends in Social and Behaviour Sciences - Proceedings of the 2nd International Congress on Interdisciplinary Behavior and Social Sciences 2013, ICIBSoS 2013 . pp. 77-82.

Amuda-Yusuf, Ganiyu and Mohamed, Sarajul Fikri (2015) Essential features of a building services standard method of measurement in Malaysia. Engineering, Construction and Architectural Management, 22 (6). pp. 749-770. ISSN 0969-9988

Ardianto, Didik (2011) Cost-benefit analysis of sediment management in Sutami Dam, East Java, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ariff, S. A. M. and Azri, S. and Ujang, U. and Nasir, A. A. M. and Ahmad Fuad, N. and Karim, H. (2020) Exploratory study of 3D point cloud triangulation for smart city modelling and visualization. In: 5th International Conference on Smart City Applications, SCA 2020, 7 - 8 October 2020, Safranbolu, Turkey.

Aris, Azmi and Sharratt, Paul N. (2007) Evaluation of photo-fenton degradation of reactive black 5 using response surface method. Malaysian Journal of Civil Engineering, 19 (1). pp. 26-41. ISSN 1823-7843

Arjinan, Sangeetha (2014) Risks in the PAM 2006 standard form of contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Arvin, Yashar (2010) Improvement of structural stability for multi – storey building by using composite column and cable connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asmi, Ade (2008) Knowledge areas and information technology infrastructure capabilities in relation to construction project performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Asri, Afiqah Ziela (2013) Squatter houses in the area of Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Astuti, B. and Tanikawa, M. and Rahman, S. F. A. and Yasui, K. and Hashim, A. M. (2012) Graphene as a buffer layer for silicon carbide-on-insulator structures. Materials, 5 (11). pp. 2270-2279. ISSN 1996-1944

Ayob, Mohamad Haqzim and Efendi, Jon and Lai, Sin Yuan and Chandren, Sheela and Ho, Chin Siong and Nur, Hadi (2014) Synthesis and characterization of cobalt(ii) salicylaldimine complex supported on silica covered magnetite. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 21-23. ISSN 0127-9696

Ayokunle, Omoyola Tolulope (2015) The effect of balcony on thermal performance of high rise office building in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ayoosu, Moses Iorakaa and Lim, Yaik Wah and Leng, Pau Chung and Idowu, Olusegun Moses (2021) Daylighting evaluation and optimisation of window to wall ratio for lecture theatre in the tropical climate. Journal of Daylighting, 8 (1). pp. 20-35. ISSN 2383-8701

Azizul, Muhammad Farid Azizul and Knight-Lenihan, Stephen and Marjorie, Van Roon (2016) Sense shaping place: repositioning the role of sense of place in social-ecological systems from a bioregional planning viewpoint. The IAFOR Journal of Sustainability, Energy & the Environment, 3 (1). pp. 28-46. ISSN 2187-0632

Azmi, Afisza Irfan (2009) Contractor's application of extension of time in PAM 1998. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azmi, Siti Haizan (2009) Feasibility of adopting minor building works agreement in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azwi, M. K. and Mustapa, M. and Mustapa, F. D. (2020) Malaysian Bumiputera contractors' supply chain: A preliminary appraisal. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

B

Baba, Maizan and Abdullah, Mat Naim and Wan Mahmood, Wan Yusof and Misnan, Saidin (2008) An application model of quality management system in a construction project. In: Quality Management System in Malaysian Construction Industry. Penerbit UTM , Johor, pp. 64-84. ISBN 978-983-52-0588-0

Bahari, Noraini (2019) Tree species composition and configuration based on squirrel behaviour pattern in selected Malaysian urban parks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Baharin, Noor Hamizah (2012) Self assessment green building index for residential estates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharudin, Nurul 'Athiqah and Ismail, Alice Sabrina (2016) Architectural style of dawah mosque in Malaysia: from vernacular to modern structures. International Journal of Built Environment and Sustainability, 3 (2). pp. 70-78. ISSN 2289-8948

Bahrudin, Mohd. Zaki and Zulibrahim, Mohamad Zulikhram and Saad, Hamid (2015) Rural excellence awards as a catalyst of sustainable economic program in rural area. In: The 6th International Conference and Field Study in Indonesia 2015 - Rural Research and Planning Group (RRPG), 28-29 Sept, 2015, Indonesia.

Bakhary, Nor Azmi (2003) Arbitration in construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakhteri, Jahangir and Omar, Wahid and Makhtar, Ahmad Mahir (2004) Analysis of the reinforced concrete columns concealing rain water pipe in multi-storey buildings. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Bakhteri, Jahangir and Makhtar, Ahmad Mahir (2003) Investigation of failure modes in unreinforced brick masonry walls subjected to different load combinations. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Bakhtiar, Khairul Anuar and Li, Yin Shen and Misnan, Siti Hajar (2008) A framework for comparison study on the major methods in promoting sustainable construction practice. Jurnal Alam Bina, 12 (3). pp. 55-69. ISSN 1511-1369

Bakti, Erman Surya (2012) Constructability database knowledge model and guidelines of industrial plant at construction stage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Barakat, Elhadi Badawi Mahgoub (1998) Properties and performance characteristics of liquid desiccant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Barau, Aliyu Salisu and Ahmad Nazri, Muhammad Ludin (2012) Intersection of landscape, anthropocene and fourth paradigm. Living Reviews in Landscape Research, 6 (1). pp. 1-30. ISSN 1863-7329

Barrie, Alusine and Mohd. Rohani, Jafri and Kidam, Kamarizan and Ismail, Mohammad and Sarbini, Noor Nabilah and Kamarden, Hanafiah and Ali, Kherun Nita and Tajul Ariffin, Hamizah Liyana and Mohd., Norhazren Izatie and Mustaffa, Nur Emma and Abdullah, Samsiah and M. Fetri, Muhammad Syaiful Ahdat and Ramuseren, Ramuseren and Mat Ali, Nazruddin (2020) Risk assessment of design components of building construction. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, Putrajaya, Malaysia.

Bava Mohidin, Hazrina and Ismail, Alice Sabrina (2014) Historical development of administration architecture in Malaysia (15th-21st century). 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Belayutham, Sheila (2004) Kerja pembaikpulihan bangunan makmal komputer sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bigdeli Rad, Vahid and Najafpour, Hamed and Ngah, Ibrahim and Shieh, Esmaeil and Bigdeli Rad, Hamid (2014) The systematic review on safety in urban neighborhoods. Life Science Journal, 11 (10). pp. 398-405. ISSN 1097-8135

Bokhari, Normansah (2004) Pembaikan kerosakan dalam tempoh kecacatan : kajian kes : Jabatan Kerja Raya Daerah Kota Tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bong, Shirley Hui Ching (2002) Keberkesanan sistem kalis air untuk bangunan dalam cuaca tropika. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bouguerra, Khalid and Lim, Yaik Wah and Ali, Kherun Nita (2020) An investigation of the challenges and the best practices of BIM implementation in the Algerian AEC industry. International Journal of Advanced Science and Technology, 29 (2). pp. 287-300. ISSN 2005-4238

Brahim, Juliana (2012) The profile of supplement agreement law cases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bujang, Ahmad Ariffian and Anthony Jiram, Wilson Rangga and Abu Zarin, Hasmah and Md. Anuar, Farah Hanan (2015) Measuring the gen Y housing affordability problem. International Journal of Trade, Economics and Finance, 6 (1). pp. 22-26. ISSN 2010-023X

Bulus, Markus and Hamid, Malsiah and Lim, Yaik Wah (2017) Courtyard as a passive cooling strategy in buildings. International Journal of Built Environment and Sustainability, 4 (1). pp. 48-55. ISSN 2289-8948

Bulus, Markus and Hamid, Malsiah and Lim, Yaik Wah (2017) Microclimatic performance of courtyards in residential buildings in Kafanchan-Nigeria. International Journal of Built Environment and Sustainability, 4 (3). pp. 220-226. ISSN 2289-8948

Buniya, Mohanad Kamil (2014) Reverse logistic for industrial building system construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bununu, Yakubu Aliyu and Muhamad Ludin, Ahmad Nazri and Hosni, Nafisa (2016) Modelling vegetationloss and greenhouse gas emissions in Kaduna, Nigeria. In: 10th SEATUC Symposium in Shibaura Institute of Technology, 2016, Tokyo.

Burhanudin, Noor Ainy (2011) Adaptation of gateway™ as JKR process review to ensure project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

C

Ch'ng, Hui Jiun and Lim, Yong Long and Ng, Xin Yi (2014) Preliminary findings for Pulau Jerejak Leper Settlement: reconstructing the built and living environment of Camp 5. In: 5th Annual Conference. International Graduate Conference on Engineering, Science and Humanities 2014 (IGCESH2014), 19-21 August, 2014, Skudai, Johor.

Chai, Chang Sa'ar (2009) Dispute management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Siaw Hiong (2012) Construing contract clause : the literal rule. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chai, Yun Ooi (2011) Residential street width and fire engine accessibility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chan, Ching Yeng (2006) Pemulihan projek perumahan terbengkalai di Selangor dan cara mengatasinya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chan, Donald Bing Tee (2002) Garis panduan kemasukan penjadualan projek sebagai dokumen sah dalam dokumen kontrak dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Hun Beng (2000) Fire-damaged structures, rebuilt or reinstate? - factors for decision : (a case study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Nam Onn (2012) Joint venture agreement in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Charehjoo, Farzin and Ho, Chin Siong (2013) Applying quantitative techniques to evaluate the level of sustainability for physical dimension of urban form in Sanandaj City, Iran. International Journal of Sustainable Development and Planning, 8 (3). pp. 275-287. ISSN 1743-7601

Charistin, Ohueri Chukwuka (2016) Framework of motivation factors on labour productivity in Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chau, Loon Wai and Yap, Z. C. and Chin, Siong Ho (2014) Tooling up urban planning for climate change mitigation in Malaysian cities. 8th International Symposium of The Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Che Nu, Nur Farahah (2008) Contractor right of action against architect or engineer for negligence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Omar, Nurul Iqlima (2016) Penilaian pencapaian piawaian perancangan bekalan air bagi perumahan terancang di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che On, Shahrul (2014) Thermal performance of potted plants in mitigating indoor temperature in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Pa, Mariana (2017) Legislative measures in protecting the environment for future project developments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Cheah, Siok Teng (2019) The effectiveness of the implementation of CIPAA 2012 in alleviating the payment ills of Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Cheng, Tung Chong and Hochgreb, Simone (2011) Measurements of lamir flame speeds of acetone/methane/air mixtures. Combustion and Flame, 158 . pp. 490-500. ISSN 0010-2180

Cheng, Yew Leong (2010) Integrating green initiatives into existing commerical buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chenya, Liao and Aminudin, Eeydzah and Mohd., Suzila and Yap, Loh Seng (2022) Intelligent risk management in construction projects: Systematic literature review. IEEE Access, 10 (NA). pp. 72936-72954. ISSN 2169-3536

Cheong Yong, Yee and Mustaffa, Nur Emma (2013) Critical success factors for Malaysian construction projects: An empirical assessment. Construction Management and Economics, 31 . pp. 1-21. ISSN 01446193

Chia, Gin Jiah (2016) Chinese opera cultural center as a medium of expressing the cultural identity in Chinatown, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chia, Sok Ling (2008) Minimizing solar insolation in high-rise buildings through self-shaded form. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chiew , Seng Khoon (2004) Control of materials on site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chin, Kean Voon (2010) Employer's right of set-off in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chin, Kuie Too (2001) Identifying and measuring of factors affecting labour productivity for brickwork on construction site in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ching, Chen Leng (2016) Principles of assignment on accrued causes of action. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chiong, Hoe Sieng (2017) The visual pattern of integrated spaces for Chow Kit AIDS/HIV community. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chong, Alan Sze Hsyung (2022) Retention sum in construction contracts. Masters thesis, Universiti Teknologi Malaysia.

Chong, Ka Fung (2008) Collaborative site monitoring system for construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Kean Yee (2007) Finite element analysis on the defected reinforced concrete column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Oi Siang (2011) Wrongful termination of contract in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chong , Voon Yaw (2004) A study of problems during construction stage for conventional housing project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choon, T. T. and Sim, L. C. and Connie, T. and Nita, A. K. and Uche, A. G. and Chen, G. K. (2016) Influential factors in estimating and tendering for construction work. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Chua, Huwi Huwi (2001) Facilities management of intelligent building : developing an application model in the management of intelligent building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chua, Soon Chiang (2001) Kajian awal tindakbalas dinamik angin ke atas bangunan tinggi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chua , Tee Khoon @ Chua Yong Peng (2004) Critical factors that influence the success of implementing value management in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chung, Leng Pau and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Hamid, Malsiah (2014) Application of CFD in prediction of indoor building thermal performance as an effective pre-design tool towards sustainability. World Applied Sciences Journal, 30 (30 A). pp. 269-279. ISSN 1991-6426

Chung , Keat Wei (2004) Information management to integrate cost and schedule for infrastructure projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

D

Dabo Baba, Hammad (2010) Building information modeling in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dahlan, Ahmad (1999) Implementing total quality in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Danial, Norhana and Misnan, Mohd. Saidin (2022) Possession of site: another layer of complexity in road construction. Sustainability, 14 (11). pp. 1-20. ISSN 2071-1050

Dehdasht, Gholamreza and Zin, Rosli Mohamad and Keyvanfar, Ali (2015) Risk classification and barrier of implementing risk management in oil and gas construction companies. Jurnal Teknologi, 77 (16). pp. 161-169. ISSN 0127-9696

Denan, Zuraini (1999) Assessment and modification of daylight prediction and estimation tools for Malaysian practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ding, James Tse Wen (2015) Interpreting contractual provision: extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Dodo, Y. A. and Kandar, M. Z. and Ossen, D. R. and Jibril, J. D. and Bornoma, A. H. and Abubakar, A. I. (2013) Importance of a view window in rating green office buildings. In: Advanced Materials Research.

Dodo, Yakubu Aminu and Nafida, Raja and Zakari, Amamata and Elnafaty, Abbas S. and Nyakuma, Bemgba Bevan and Bashir, Faizah Mohammed (2015) Attaining points for certification of green building through choice of paint. Chemical Engineering Transactions, 45 . pp. 1879-1884. ISSN 2283-9216

Dodo, Yakubu Aminu and Pontip, Stephen Nimlyat and Muhammed, Gambo Abdullahi and Kandar, Mohd.Zin (2016) A field study of thermal and visual performance of self-shading energy commission diamond building, Putrajaya, Malaysia. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Dwi Prasetyo, Agung Nugroho (2011) A comparative study on Indonesia and Malaysia contractor selection practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

E

El Rahman Gouda, Hamdy Abd. (1999) Performance of structural wood column exposed to fire (Volume I : Text). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

El-Nafaty, Abbas Sa’id (2018) Environmental performance of naturally ventilated library buildings in Bauchi, Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Eluwa, Stephen Enyinnaya and Ho, Chin Siong (2013) Willingness to engage in energy conservation and CO2 emissions reduction: an empirical investigation. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Embi, Mohamed Rashid and Said, Suzana (2008) An information model for the traditional long-roof typed malay houses. Jurnal Alam Bina, 12 (3). pp. 19-54. ISSN 1511-1369

Enegbuma, W. I. and Dodo, Y. A. and Ali, Kherun Nita (2014) Building information modelling penetration factors in Malaysia. International Journal of Advances in Applied Sciences, 3 (1). pp. 47-56. ISSN 2252-8814

Enegbuma, Wallace Imoudu and Ali, Kherun Nita (2013) Hypothesis analysis of building information modelling penetration in Malaysian Construction Industry. In: Proceedings of the CIB World Building Congress 2013, 2013.

Enegbuma, Wallace Imoudu and Ali, Kherun Nita and Ologbo, Andrew Chukwuyem and Aliagha, Uche Godwin (2014) Preliminary study impact of building information modelling use in Malaysia. IFIP Advances in Information and Communication Technology, 442 . pp. 51-62. ISSN 1868-4238

Engkamat, Frauline (2009) The superintending officer’s duties under JKR Sarawak form of contract PWD 75 (Ver. 2006). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Esam, Asrul Affandi (2000) Kajian kes : penilaian terhadap kos tidak wajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Estahbanati, Seyed Reza Morsheidi (2014) Feasibility for singular sustainable building indicator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

F

Faghirinejadfard, Amir (2014) Economic comparison of industrialized building system with conventional system through cost estimation using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faizal, Fazleen (2009) Pembangunan perumahan Iskandar Malaysia dan faedahnya kepada rakyat tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Farea, Tareq Gaber (2014) Configuration of horizontal voids and lightwell to improve natural ventilation in high-rise residential buildings in hot humid climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Fathi, Mohamad Syazli (2011) Major mitigation measures for delays in construction projects. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia.

Fathi, Mohamad Syazli and Abedi, Mohammad and Mirasa, Abdul Karim (2012) Construction industry experience of industralised building system in Malaysia. In: Ninth International Congress on Civil Engineering ((ICCE), Isfahan University of Technology (IUT), May 8-10, 2012, Isfahan, Iran. (Submitted)

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia (2010) An innovative mobile application for construction programme managers. In: 6th International Conference on Innovation in Architecture, Engineering & Construction (AEC), 9-11 June 2010, The Nittany Lion Inn, THe Pennsylvannia State University, USA.

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia and Zakiyudin, Mohd. Zulakhmar (2009) Real-time mobile information system for construction programme management. In: Proceeding of 2nd Construction Industry Research Achievement International Conference , 2009, Kuala Lumpur.

Fathi, Mohamad Syazli and Mirasa, Abdul Karim (2011) Establishment and development of IBS in Malaysia. In: International Building and Infrastructure Technology Conference (BITECH 2011), 7-8 Jun 2011, Penang, Malaysia.

Fathi, Mohamad Syazli and Anumba, Chimay and Carrillo, Patricia (2006) Context awareness in construction management - key issues & enabling technologies. In: Proceedings of The Joint International Conference on Construction Culture, Innovation and Management (CCIM), In Mohammed Dulaimi (Eds.) , 26-29 November 2006, Dubai, UAE. (Submitted)

Femi, Akinyode Babatunde (2017) Factors of affordability in housing in the city of Ibadan, Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Foong, Kok Li (2006) Scheduling on transportation for industrialized building systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fujita, Yoshinori and Matsumoto, Hiroshi and Ho, Chin Siong (2009) Assessment of CO2 emissions and resource sustainability for housing construction in Malaysia. International Journal of Low-Carbon Technologies, 4 . pp. 1-11. ISSN 17481317

Fuza, Z. I. M. and Isa, S. M. and Ismail, H. N. (2016) Tour operators’ information and communication technology adoption in Malaysia. In: 3rd International Hospitality and Tourism Conference, IHTC 2016 and 2nd International Seminar on Tourism, ISOT 2016, 10-12 Oct 2016, Bandung, Indonesia.

G

Gabriel, Ling Hoh Teck and Jia, Chyi Pung (2019) An urban governance approach in the development of commercial brownfield: a case study of Iskandar Malaysia. International Journal of Built Environment and Sustainability, 6 (1). pp. 31-38. ISSN 2289-8948

Gan, Gilbert Siang Yang (2015) Contractor's implied duty to warn design defects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Gan, Ming Ong (2005) Lateral stability of high-rise building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ganjbakhsh, Hamed (2010) Building performance diagnoses using post occupancy evaluation for low energy office building practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghahramanpouri, Amir and Sedaghatnia, Sepideh and Lamit, Hasanuddin and Abdullah, Ahmad Saifuddin and Rasidi, Mohd. Hisyam and Rosley, Muhamad Solehin Fitry (2015) The vitality of a pedestrian street in Johor Bahru City. In: International Joint-Conference of SENVAR-INTA-AVAN- SIA2015, 24-26 Nov, 2015, Johor Bahru, Malaysia.

Gharakhani, Alireza and Sediadi, Eka and Khan, Tareef Hayat and Sabzevar, Hadi Bagheri (2014) Use of natural ventilation in Malaysia's future green housing. Advanced Materials Research, 935 . pp. 316-319. ISSN 1022-6680

Gharakhani, Alireza and Sediani, Eka and Khan, Tareef Hayat and Sabzevar, Hadi Bagheri (2013) Use of natural ventilation in Malaysia's future green housing. In: 3rd International Conference on Green Buildings Technologies and Materials, GBTM 2013, 21-22 Dec, 2013, Kuala Lumpur, Malaysia.

Ghasemi, Mohammad Mir and Lamit, Hasanuddin and Shafaghat, Arezou (2014) The association between riverscape and place attachment in historical cities in Malaysia. Jurnal Teknologi, 70 (7). pp. 147-154. ISSN 0127-9696

Ghavami Rad, Farzan (2013) Global warming potential of building demolition activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghazali, Khairil Akhtar (2021) Keberkesanan pembangunan Bandar Mesra Belia di Tanjong Malim, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Ghazali, Norasraf and Hamzah, Amran (2014) Preserving the uniqueness cultural landscape in Setiu Wetlands. In: International Conference on Urban and Regional Planning (ICURP) 2014, 9-11 May, 2014, Skudai, Johor.

Ghods, Mohsen and Najafpour, Hamed and Lamit, Hasanuddin and Abdolahi, Naghmeh and Rosley, Muhamad Solehin Fitry (2014) Evaluation of the effective factors on online internet usage in organizations. Life Science Journal, 11 (1). pp. 58-63. ISSN 1097-8135

Ghomeshi, Mohammad and Nikpour, Mansour and Mohd. Jusan, Mahmud (2012) Evaluation of conceptual properties by layperson in residential façade design. Art and Design Studies, 3 . pp. 13-18. ISSN 2225-059X (Electronic); 2224-6061 (Print)

Ghomeshi, Mohammad and Nikpour, Mansour and Mohd. Jusan, Mahmud (2012) Identifying the different aesthetic quality of building attributes from architects perspectives. International Journal of Modern Engineering Research (IJMER), 2 (3). pp. 917-919. ISSN 2249-6645

Ghomi, Saeid Khalili (2013) Building information modeling in planning and scheduling phase in Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Keng Chai (2003) Maintenance management problems in low-cost flats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Goh, Zhen Ting and Low, Sheau Ting and Choong, Weng Wai and Wee, Siaw Chui (2022) Do green features increase housing value in Malaysia? International Journal of Housing Markets and Analysis, 15 (5). pp. 1296-1312. ISSN 1753-8270

Golizadeh, Hamed (2013) Predicting the required duration for construction activities using Artificial Neural Networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Golzarpoor, Hamed (2010) Application of BIM in sustainability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gong, Xiaoye (2010) The meaning of community cultural tourism on minority host women : a case study of Lugu-Lake, Mosuo and Dai Minority Tribes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Goodarzi, Maryam (2012) The role of pulic participation in developing the urban park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Gouda, Hamdy Abd El Rahman (1999) Performance of structural wood column exposed to fire (Volume II : Appendices). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gul, Y. and Sultan, Z. and Jokhio, G. A. (2018) The association between the perception of crime and walking in gated and non-gated neighbourhoods of Asian developing countries. Heliyon, 4 (8). ISSN 2405-8440

H

Hidzir, Nur 'Izzati (2014) Application of estoppel and waiver in the non-fulfillment of condition precedent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

H. Alrawi, Fatin Faris (1998) Modern and innovative structural systems : behaviour of framed buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hajijan, Hilmi (2011) Termination of contractor when time is of the essence in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hamidi, Behzad (2010) A green cost allocation model for office and commercial buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamood Al-Harthy, Amur Salim (2006) The consultancy fee for structural design changes of reinforced concrete buildings in Oman. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamza, Samaila and Musta'amal@Jamal, Aede Hatib and Kamin, Yusri and Galadima, Muhammed and Angulu, Haruna (2017) Diffusing green skills in building construction trade: a key to social sustainability. ATBU, Journal of Science, Technology & Education (JOSTE), 5 (3). pp. 50-59. ISSN 2277-0011

Hamzah, Abd. Halim and Roslan, Nuraini (2022) Ownership and access on beach: a case study on Avani Sepang Gold Coast, Selangor, Malaysia. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 198-210. ISSN 0128-178X

Hamzah, Azman (2010) Standard of proof on fraud in civil proceedings and voidable construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hamzani, Norfatiha (2008) The eco-labeling on sustainable roof materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Han, Siew Hee (2011) Global claims for damages in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Haron, Zaiton and Oldham, David and Yahya, Khairulzan and Zakaria, Rozana (2008) A probabilistic approach for modelling of noise from construction site for sustainable environment. Malaysian Journal of Civil Engineering, 20 (1). pp. 58-72. ISSN 1823-7843

Haron, Ahmad Tarmizi (2004) Faktor kejayaan kaedah reka dan bina : kajian terhadap kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Zaiton and Mohd. Noh, Hamidun and Yahya, Khairulzan and Omar, Wahid and Abd Majid, Zaimi (2012) Assessing noise emission levels from earthwork construction equipment. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 13-28. ISSN 1823-7843

Hashim, Ayob (2002) Pengurusan asap di dalam atrium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Maizon (1999) The effects of procurement methods on performance of construction projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Noor Baharim and Ibrahim, Zulkiflee and Huddleston, David H. and Ng, Boon Chong (2003) Hydraulic performance of high-velocity channels in flood-prone areas. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hashim, Norhaibati (2011) Diminution in value of works due to deffects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hassan, Mohamad Zaki (2002) A thermoeconomic analysis for home air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hedayati, Ali (2014) Identifying the barriers in the development of building information modeling in construction engineering and management of educational systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hendrino, Hendrino (2017) Kandungan tenaga dan emissi karbon dalam bahan binaan rumah kediaman di Sumatera Barat, Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Heng, Christopher Y. S. and Ossen, D. R. and Lim, Y. W. (2015) Daylight performance through different types of glazing in the tropics. In: SENVAR-INTA-AVAN 2015, 24-26 Nov, 2015, Johor Bahru, Malaysia.

Heng, Christopher Yii Sern (2017) Performance of horizontal light pipe for daylighting in high-rise office building in tropical region. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Heng, Robert Wei Kiong (2009) Variation orders in design and build contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hesham, E. O. and Said, Ismail and Rasidi, Mohd. Hisyam (2014) Residents' perception towards social interaction among Malaysian ethnic groups in urban park. Recent Trends in Social and Behaviour Sciences - Proceedings of the 2nd International Congress on Interdisciplinary Behavior and Social Sciences 2013, ICIBSoS 2013 . pp. 9-15.

Hidayat, Muhammad Syarif (2004) Pembangunan program tropic untuk simulasi pembolehubah bumbung terhadap keselesaan dalaman di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hiew, Fong Poh (2010) Pre-award interest in construction arbitration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hosseini, Mohammad Mahdi (2012) Termination of construction contracts by employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hosseinian, Seyyed Shahab (2012) Safety considerations during the design process in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hosseinpour, Emad (2013) Flexural behavior of steel reinforced brick beam utilizing interlocking brick system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Husain, Adnan (1997) Investigation of thermal comfort in factory environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husni, Zul Hazran and Ahmad Shatiry, M. Sahir and Harun, Firdaus and Sarip, Shamsul and Abd. Rahim, Zulhasni (2023) Critical success factors (CSFs) in brownfield construction project. In: 11th International Conference on Applied Science and Technology 2022, ICAST 2022, 13 June 2022 - 14 June 2022, Putrajaya, Malaysia - Hybrid.

Hussain, Afifuddin Husairi and Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Che Ani, Adi Irfan and Mohd. Ali, Zarina (2015) Examining the Challenges for the adoption of Building Information Modelling (BIM) in Malaysia from clients’ perspective. In: 4th International Conference on Engineering Business Management, 22-23 August, 2015, Kuala Lumpur, Malaysia.

Hussain, Noriah (2012) Keberkesanan fungsi bandar penawar sebagai bandar perkhidmatan pelancongan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussain, S. Yasmin Sofia and Said, Ismail (2015) Knowledge integration between planning and landscape architecture in contributing to a better open space. In: Asian Conference on Environment-Behaviour Studies Chung-Ang University, 25 - 27 August 2014, Seoul, South Korea.

Hussein, Sharisa (2013) Architect's duties in relation to supervision of construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussin, Mohd. Warid and Bhutta, Muhammad Aamer Rafique and Mohd. Azreen, Mohd. Azreen and Ramadhansyah, Putra Jaya and Mirza, Jahangir (2015) Performance of blended ash geopolymer concrete at elevated temperatures. Materials And Structures, 48 (3). pp. 709-720. ISSN 1359-5997

Hussin, Mohd. Warid and Lim, Siong Kang and Zakaria, Fadhadli (2007) Engineering properties of high volume slag cement grout in tropical climate. Malaysian Journal of Civil Engineering, 19 (1). pp. 42-54. ISSN 1823-7843

Hussin, Mohd. Warid and Muthusamy, Khairunisa and Zakaria, Fadhadli (2010) Effect of mixing constituent toward engineering properties of pofa cement-based aerated concrete. Journal of Materials in Civil Engineering, 22 (4). 287 - 295. ISSN 0899-1561

Hussin, Natasha Azim (2014) Factors influencing the successful implementation of crime prevention through environmental design program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hwang, Chee Leong (2002) Hazards in construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hye Mian, Md. Abdul (1998) Using numerical techniques for predicting the fire resistance of steel column, during fire. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

Ibrahim, Fadzilah (2006) Faktor-faktor kritikal bagi pemulihan projek perumahan terbengkalai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Fawazul Khair (2012) Tipologi hulu keris tradisi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ibrahim, Suhaini (2015) Hubungan jaringan antara perusahaan kecil dan sederhana industri pelancongan di Kampung Cherating Lama, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Idi, D. B. and Khaidzir, K. A. M. (2017) Design problem-solving: understanding the significance of iterative-behaviour in design. Planning Malaysia, 15 (1). pp. 129-138. ISSN 1675-6215

Idris, Katun M. and Ali, Kherun Nita and Aliagha, Godwin Uche and Keyvanfar A., Ali (2015) Effect of environmental factors on knowledge sharing in construction organization. Jurnal Teknologi, 74 (4). pp. 99-104. ISSN 0127-9696

Idris, Nor Jalilah (2006) Effect of work programme in extension of time entitlement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Idris, Siti Rabiatull Aisha and Ourdjini, Ali (2012) Effect of multiple reflow on IMC formation using various surface finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410

Indra, Indra (2000) Kaedah pengawalan kos projek binaan yang diamalkan oleh kontraktor di Sumatera Barat Indonesia : kes kajian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Isa, Abdul Anakobe and Mohd. Jusan, Mahmud (2012) End-users participation approach towards effective housing occupancy in Malaysia: a review. British Journal of Arts and Social Sciences, 8 (2). pp. 183-197. ISSN 2046-9578

Isah, Abubakar Danladi and Khan, Tareef Hayat and Ahmad, Abdullah Sani (2014) Exploring socio-economic design implications of public housing transformation; the Nigerian experience. Applied Mechanics and Materials, 584-58 . pp. 211-216. ISSN 1660-9336

Isiaka Adeyemi, Abdul-Azeez (2012) The development and application of Malaysian University Campus Emission Tool (MUCET) towards creating sustainable campus. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Islam, Md. Rashidul (2018) Integration of building maintenance cost model into the design stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Alice Sabrina and Masridin, Mohd. Hanif (2022) Deconstructivism approach towards the future of Malaysia architecture designs. Malaysian Journal of Sustainable Environment, 9 (2). pp. 171-194. ISSN 0128-326X

Ismail, Che Mimi Suriyani (2014) Behavioural characteristics of precast beam to column connections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Fairuz Diyana and Aziz, Muhammad Safwan and Teeka, Chat and Ali, Jalil and Yupapin, Preecha Phromphan (2012) Filter design using multi-bragg reflectors. World Journal of Modelling and Simulation, 8 (3). pp. 205-210. ISSN 1746-7233

Ismail, H. and Yusof, Z. M. (2016) Perceptions towards non-value-adding activities during the construction process. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Ismail, Iziq Eafifi (2018) Spatial evolution of Sama-Bajau houses in coastal area of Sabah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Kamarul Sufwatun (2010) "Reasonable skill and care" in the professional consultant's duties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Maslie Ikran (2008) The validity of determination by insolvency clause in Malaysia standard form of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Mohamed A. and Budiea, Ahmad M. A. and Hussin, Mohd. Warid and Muthusamy, Khairunisa (2010) Effect of POFA fineness on durability of high strength concrete. The Indian Concrete Journal, 84 (11). pp. 21-28. ISSN 0019-4565

Ismail, Mohd. Affendi (2013) Weight age factor for Malaysia green highway assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nazaitul Hazira (2022) Variation and its valuation in design-build contract with regard to the public sector of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Ismail, Neza (2004) Design considerations, practices and problems : a survey of private consultant firm perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Syuhaida and Zakaria, Zarabizan (2015) Best practices of contract management approach towards excellent service culture in construction project. In: Mesyuarat Pegawai Kanan JKR 2015, 8-10 Jun, 2015, Johor Bahru, Johor.

J

Ja’afar, Nor Haslina (2014) Karakter fizikal jalan tradisional, kajian kes di Melaka, Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jagar Singh, Bachan Singh Besawa (1999) The procurement and management for roof maintenance at Universiti Teknologi Malaysia, Skudai, Johor : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaluddin, Nur Fateha (2013) A study on comparison between solar cooling system and conventional cooling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaludin, Adilah (2019) An evaluation of planning appeal system of selected states in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jamaludin, Khairul Saleh (2008) Perlaksanaan konsep bina-kemudian-jual (BKJ) ke arah meminimumkan bilangan projek perumahan terbengkalai di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jambol, Awang Muhamad (2011) Mutual termination of contract in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jamil, Mas Hafizah (2010) Uberrimae fidei in construction insurance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jamil, Norlila (2021) Penentuan pampasan munasabah bagi pengambilan tanah yang telah mempunyai kelulusan pembangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Jamil Khair, Nur Amni (2022) Ambiguities in standard form of contract. Masters thesis, Universiti Teknologi Malaysia.

Janardhanan, J. Vijay (2004) Pengubahsuaian rumah di Daerah Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jasimin, Tuti Haryati and Mohd. Ali, Hishamuddin (2014) The impact of sustainability on the value of commercial office buildings in Malaysia: Russian-Doll model approach. Jurnal Teknologi, 71 (4). pp. 131-143. ISSN 0127-9696

Jasri, Siti Aishah Aqilah (2011) Disputes in design and build construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Javidi, Behdad (2013) The relationship between the peripheral buildings and public square character in the case study of Stadthuys Square in Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jiun, Ch’nghui and Lim, Yong Long and Yi, Ng Xin (2014) Preliminary survey finding of the built and living environment in Camp 5, Pulau Jerejak settlement. Jurnal Teknologi, 71 (5). pp. 25-29. ISSN 0127-9696

Jivai, Julviati (1999) Masalah sistem pengurusan projek binaan di Sumatera Barat Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

K

Kamarul Zaman, N. A. F. and Kanniah, K. D. and Kaskaoutis, D. G. and Latif, M. T. (2021) Evaluation of machine learning models for estimating pm2.5 concentrations across Malaysia. Applied Sciences (Switzerland), 11 (16). ISSN 2076-3417

Kadir, Kaidir (1997) Kajian prestasi pam haba dan penjimatan tenaga sistem penyaman udara domestik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kalatehjari, Roohollah (2013) An improvised three-dimensional slope stability analysis based on limit equilibrium method by using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamaludin, Nurhidayah (2012) Architect's liability in making decision during construction stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kamani-Fard, Asal and Ahmad, Mohammad Hamdan and Dilshan Remaz, Ossen (2012) The sense of place in the new homes of post-Bam earthquake reconstruction. International Journal of Disaster Resilience in the Built Environment, 3 (3). pp. 220-236. ISSN 1759-5908

Kamaruddin, Tantish and Adul Hamid, R. and Abd. Ghani, S. (2020) Social aspect implementation in sustainable construction. In: 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019, 20 August 2019 - 22 August 2019, Langkawi, Kedah, Malaysia.

Kamaruddin, Tantish and Adul Hamid, R. and Rohaizam, N. A. S. (2020) A situational study on sustainable housing features in Johor. In: 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019, 20 August 2019 - 22 August 2019, Adya Hotel, Langkawi, Malaysia.

Kamarudin, Zumahiran and Said, Ismail (2008) Visual forms of carved components in traditional timber houses of Kelantan and Terengganu. Jurnal Alam Bina, 12 (3). pp. 71-96. ISSN 1511-1369

Kamaruzaman, Siti Huda (2011) Risk in construction contractual term and condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kamsah, Nazri (1988) Development of an apparatus for the measurement of thermal conductivity of building materials. Masters thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Kan, Fock Kui (2016) A model for assessing procurement irregularities in decision making process at the tendering stage of construction projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Karim, Hairi and Abdul Rahman, Alias and Azri, Suhaibah and Halim, Zurairah (2022) The development of multi-scale data management for CityGML-based 3D buildings. Geomatics and Environmental Engineering, 16 (1). pp. 71-94. ISSN 1898-1135

Karimi, Narciss and Sediadi, Eka and Lim, Yaik Wah (2015) Energy saving in residential apartments by using PV shading. International Journal of Applied Engineering Research, 10 (15). pp. 36012-36015. ISSN 0973-4562

Kasim, Narimah (2000) Integrating construction sheduling and knowledge-based systems for generating material scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kasimu, M. A. and Amiruddin, Roslan and Abdullah, Fadhlin (2013) The application of knowledge management in construction organization in Nigeria. Asian Journal of Information Technology, 12 (5). pp. 147-153. ISSN 1682-3915

Kassim, Khairul Anuar (2009) The effect of catalyst on soil stabilization by application of lime. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Kelvin, L. Walls (2001) Fire safety in buildings. Jurnal Teknologi B, Universiti Teknologi Malaysia, 34 (B). pp. 13-20. ISSN 0127-9696

Kerk, Chia Cun (2017) Contemporaneous records in construction claim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Keyvanfar, Ali (2013) Adaptive behavior satisfaction index analysis framework for energy efficient building assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Abd. Ghani and Abdul Hamid, Razali and Mohd. Yusof, Zakaria and Misnan, Mohd. Saidin (2006) Data-base: harga bahan dan buruh binaan. Project Report. Faculty of Built Engineering, Skudai, Johor. (Unpublished)

Khalid, Abdul Ghani and M. Yusof, Zakaria and A. Hamid, Razali and Misnan, Mohd. Saidin (2003) Penyediaan indeks kos bangunan. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Khatibi, Mahsa and Khaidzir, Khairul Anwar Mohamed (2022) Utoward a value-driven framework for built environment sustainability: investigating the recent developments through the design paradigm. International Journal of Design Management and Professional Practice, 16 (1). pp. 19-35. ISSN 2325-162X

Khiyon, Noor Azeyah (2011) Issues relating to contract administrator's instruction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

King, Adrain Tzee Yang (2002) Integration of sheq management system in construction field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koh, Heng Boon (2000) Kerjabata galas beban sebagai kaedah rekabentuk alternatif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kok, Wing Yan (2017) Interference: dispute associated with determination of own employment by contractor in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Kolop, Roslan (2001) The block properties and structural behaviour of loadbearing interlocking hollow cement block systems manufactured using mobile block machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koo, Nyuk Kin and Abd. Rozan, Mohd. Zaidi (2011) Development of Pasir Gudang community emergency fire response framework. In: Innovation in Information Systems: Series 2. Penerbit UTM Press, Skudai, Johor, pp. 137-150. ISBN 978-983-52-0813-3

Koo, Zhong Yee (2022) Force majeure events in construction industry. Masters thesis, Universiti Teknologi Malaysia.

Ku Ismail, Ku Adenan (2004) Recovery plan strategy on the delay construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kubota, Tetsu and Zakaria, Mohd. Azuan and Abe, Seiji and Hooi Chyee, Doris Toe (2017) Thermal functions of internal courtyards in traditional Chinese shophouses in the hot-humid climate of Malaysia. Building and Environment, 112 . pp. 115-131. ISSN 0360-1323

Kurniawan, Lutfi (2015) The challenges faced by government contractors in managing the flyover projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

L

Leong, Chun Yen (2016) Third party funding for arbitration in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Laily Roslan, Rose Diyana (2010) Brick material for construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lam, Tian Sui (2020) Profiling of valid available grounds to claim extension of time in construction industry. Masters thesis, Universiti Teknologi Malaysia.

Lamit, Hasanuddin and Dilshan, Remaz Ossen and Raja Shahminan, Raja Nafida and Ahmed Al-Ameri, Adeb Qaid (2016) Urban heat island and thermal comfort conditions at micro-climate scale in a tropical planned city. Energy and Buildings, 133 . pp. 577-595. ISSN 03787788

Laton, Mohd. Fathel (2012) Application for stay of proceedings and unconditional appearance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lau, Siew Soon (2017) Termination for convenience by employer in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lau , Guan Heng (2004) Construction coordination activities in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Chew Tin and Hashim, Haslenda and Chin, Siong Ho and Klemes, Jiri Jaromir (2016) Low-carbon Asia: technical contributions to an ambitious goal for sustainability. Clean Technologies and Environmental Policy, 18 (8). pp. 2335-2336. ISSN 1618-954X

Lee, Le Ming (2019) Modelling of ground penetrating radar backscatter for water pipeline leakage detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Lee, Shiau Mei (2007) Judicial interpretations on the phrase 'regulary and diligently' in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Sze Yin (2010) Contracting out of statutory provision in Malaysian construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Teck Shin (2014) Outrigger system for interconnecting three dimensional multi-stories buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Xia Sheng (2006) Direct loss and expense relating to remoteness of damages. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee , Chin Heng (2004) Just-in-time management of precast concrete building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Leje, Mohammed Isah and Shamsulhadi, Bandi and Fadhlin, Abdullah (2022) Professional perceptions on the roles of skilled workers in performance of the construction industry. International Journal of Public Sector Performance Management, 10 (2-3). pp. 271-282. ISSN 1741-1041

Leng, Pau Chung (2017) Natural ventilation performance of air welled single storey terrace house. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Leng, Pau Chung and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Hamid, Malsiah (2014) Implementation of solar chimney in orang asli settlement in Bukit Lagong Selayang. In: 5th International Graduate Conference on Engineering, Science and Humanities 2014, 19-21 August, 2015, Skudai, Johor.

Leng, Pau Chung and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Hamid, Malsiah and Baharvand, Mohammad (2014) The effects of orientations on the room's thermal performance in the tropics. Applied Mechanics and Materials, 567 . pp. 631-636. ISSN 1660-9336

Leng, Pau Chung and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Ling, Gabriel H. T. and Abdullah, Samsiah and Aminudin, Eeydzah and Liew, Wai Loan and Chan, Weng Howe (2019) The impact of air well geometry in a Malaysian single storey terraced house. Sustainability (Switzerland)11, 11 (20). p. 5730. ISSN 2071-1050

Leng, Pau Chung and Ling, Gabriel Hoh Teck and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Aminudin, Eeydzah and Chan, Weng Howe and Tawasil, Dg. Normaswanna (2021) Thermal performance of single-story air-welled terraced house in malaysia: A field measurement approach. Sustainability (Switzerland), 13 (1). pp. 1-23. ISSN 2071-1050

Leong, Mei Wan (2010) Contractor's liability relating to defective works that are discovered after the defects liability period. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Leong, Shiang Chin (2003) Procurement method as conflict and dispute reduction mechanism for construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lesado, Makama (2012) The effect of long term exposure on thermal performance of roofing materials in Malaysian climatic condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Li, Xiaojuan and Wang, Chen and A. Kassem, Mukhtar and Liu, Yishu and Ali, Kherun Nita (2022) Study on green building promotion incentive strategy based on evolutionary game between government and construction unit. Sustainability, 14 (16). pp. 1-15. ISSN 2071-1050

Liew, Li Ming (2009) Time essence and termination in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew , Eric Cheok Fai (2004) Implementation of microsoft project to improve conventional construction reporting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Jing Jing and Lim, Yong Long (2017) The dawn of humane leprosy segregation: transforming leprosarium into home. International Journal of Built Environment and Sustainability, 4 (1). pp. 1-9. ISSN 2289-8948

Lim, Kar Sing (2012) Corrosion study on X70-carbon steel material influenced by soil engineering properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Pui Chung (2006) Implementation strategy for industrialised building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Siong Kang (2008) Engineering properties of resin grout as concrete repair material. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Siong Kang (2002) Pengurusan penyelenggaraan dan pembaikpulihan struktur bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Tze Shwan (2011) Contractor's liabilities towards employer's defective building work claims during defect liability period. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lim, Victor Aik Jin (2008) Lean construction : knowledge and barriers in implementing into Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Wan Wei (2010) Construction insurance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lim, Yaik Wah and Kafashian, Zahra (2015) Better daylighting to improve energy efficiency of existing buildings using building modelling case: Qazvin Construction Engineering Organization (QCEO), Iran. In: UM-COHAS International Conference 2015, 3-4 August, 2015, Kuala Lumpur, Malaysia.

Lim, Yaik Wah and Seghier, Taki Eddine and Ahmad, Mohd. Hamdan and Leng, Pau Chung and Mat Yasir, Azari and Abdul Rahman, Noraslinda and Chan, Wai Lai and Syed Mahdzar, Sharifah Salwa (2021) Green building design and assessment with computational BIM: The workflow and case study. In: 4th International Conference on Building Information Modelling (BIM) in Design, Construction and Operations, BIM 2021, 8 - 10 September 2021, Santiago de Compostela, Spain.

Lim, Yaik Wah and Shahsavari, Fatemeh (2015) Green-bim template (GBIMT) for sustainable building massing and planning in tropical climate. In: UM-COHAS International Conference 2015, 3-4 August, 2015, Kuala Lumpur, Malaysia.

Lim, Yalk Wah and Kandar, Mohd. Zin and Ahmad, Mohd. Hamdan and Ossen, Dilshan Remaz and Megat Abdullah, Aminatuzuhariah (2012) Building facale design for daylighting quality in typical government office building. Building and Environment, 57 . pp. 194-204. ISSN 0360-1323

Lim, Yong Long (2015) Sungai Buloh settlement - past, present and future. In: The 1st International Symposium on the Preservation of Heritage and Collective Memories of Communities Affected by Leprosy, 14 August, 2015, Kuala Lumpur, Malaysia.

Lim , Chee Yang (2004) Coordination in construction industry : a study on factors leading to success and failure of it. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Limana, Aminu and Ngah, Ibrahim (2017) Evaluation of impact of electricity industry of Nigeria on rural electrification in Adamawa State of Nigeria. Page 1 International Journal of Scientific Engineering and Applied Science (IJSEAS), 3 (8). pp. 1-12. ISSN 2395-3470

Lin, Mazuan (2016) Limitation period in latent defects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ling, Tung Chai and Siong, Kang Lim and Hussin, Mohd. Warid and Zakaria, Fadhadli (2008) GGBFS as potential filler in polyester grout : flexural strength and toughness. Construction and Building Materials . pp. 1-9.

Ling, Oliver Hoon Leh (2001) Kajian kualiti alam sekitar perumahan di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loh, Yun Lu and Lee, Janice Yim Mei and Al-mulali, Usama and Ahmad, Nurul Afiqah and Mohammad, Izran Sarrazin (2015) Housing bubble in Penang prediction and determinants. Jurnal Teknologi, 73 (5). pp. 65-69. ISSN 2180-3722

Lokman, Muhamad Amir Afiq (2019) Model berstruktur kompetensi bagi pengurus projek bangunan hijau di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Loo, Choo Beng (2002) Pemeliharaan bangunan warisan : kajian kes : Bandaraya George Town, Pulau Pinang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Loo, Jenny Shih Yein (2012) The profile of construction delay cases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Loo, Shih Nie @ Nancy Loo (2012) Profile of set-off cases in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

M

Mohameda, Nurul Najidah and Yuan, Laisin and Lee, Siew Ling and Ho, Chin Siong and Chandren, Sheela and Hadi, Nur (2014) Preparation of hierarchical porous carbon derived from averrhoa bilimbi and its diffusion properties. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 61-64. ISSN 0127-9696

M., Abedi and M. S., Fathi and M. F. , Mohammad (2011) Major causes of construction delays under client category and contractor category. In: The First Iranian Students Scientific Conference in Malaysia, Apr 9 & 10, 2011, UPM, Malaysia. (Submitted)

M., Abedi and M. S. , Fathi and M. F., Mohammad (2011) Effects of construction delays on construction project objectives. In: The First Iranian Students Scientific Conference in Malaysia, April 9-10, 2011, UPM, Malaysia. (Submitted)

M. Majrashi, Abdulrahman Abdulaziz (2017) Development-induced displacement of informal settlements in Makkah, Saudi Arabia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

M. Nor, Hadzira (2010) Consolidation of arbitral proceedings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Liang, Maybelle and Jaw, Siow Wei and Azimi, Mohammadamin (2016) Flexural capacity enhancement of rectangular high-strength concrete columns confined with post-tensioned steel straps: experimental investigation and analytical modelling. Structural Concrete, 17 (4). pp. 668-676. ISSN 1464-4177

Mahamood, Siti Zati Hanani and Fathi, Mohamad Syazli (2022) Seismic building design work process using building information modeling (BIM) technology for Malaysian Government projects. International Journal of Disaster Resilience in the Built Environment, 13 (2). pp. 211-232. ISSN 1759-5908

Mahmoud, Abubakar Sadiq and Ahmad, Mohd. Hamdan and Mohd. Yatim, Yahya and Dodo, Yakubu Aminu (2020) Key performance indicators (KPIs) to promote building developers safety performance in the construction industry. Journal of Industrial Engineering and Management, 13 (2). pp. 371-401. ISSN 20138423

Mahmoud Nasef, Mohamed and Faris, Waleed Fekry (2010) Teaching engineering ethics: a necessary measure for engineering capacity building in Arab countries. International Journal of Arab Culture, Management and Sustainable Development, 1 (4). pp. 318-325. ISSN 1753-9412 (Print); 1753-9420 (Electronic)

Mahmud, Shahril Anwar and Ahmad, Abdullah Sani and Megat Abdullah, Aminatuzuhariah (2012) Domestic possessions and space adequacy in urban homes. International Transaction Journal of Engineering, Management and Applied Sciences and Technologies, 3 (4). pp. 439-454. ISSN 1906-9642 (Electronic) ; 2228-9860 (Online)

Mahmud, Syamsul Hendra and Amirudin, Roslan (2015) Theoretical review of safety climate in Malaysian construction industry. Australian Journal of Basic and Applied Sciences, 9 (22). pp. 114-122. ISSN 1991-8178

Mai Mai, M. M. and Shamsuddin, S. (2007) Housing transformation's delivery potential in developing economies. In: ASEAN Post Graduate Seminar in Built Environment, 3-5 Dec. 2007, University of Malaya.

Maidin, Noraini (2010) Status of estimates for emergency work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Majelan, Nur Amira and Rangga, Wilson Anthony Jiram and Ismail, Azizah and Bujang, Ahmad Ariffian (2019) Efficiency of housing delivery system for affordable homeownership in Malaysia a review of literature. Jurnal Kemanusiaan, 18 (1). pp. 20-24. ISSN 2600-755X

Majid, M. Rafee and Jaffar, Abdul Razak and Che Man, Noordini and Vaziri, Mehdrad and Sulemana, Mohamed (2015) Mapping poverty hot spots in Peninsular Malaysia using spatial autocorrelation analysis. In: 13th International Congress of Asian Planning Schools Association (APSA), 12-14 August, 2015, Skudai, Johor.

Majid, Mohammad Rafee and Johar, Foziah and Nordin, Alia N. (2012) Neighbourhood design and Vmt: is Malaysia planning to achieve the spirit of new urbanism? In: The Association of European Schools of Planning 26th Annual Congress (AESOP 2012), 11-15 Jul 2012, Ankara, Turkey.

Majid, Mohammad Rafee and Moeinzadeh, S. N. and Tifwa, H. Y. (2014) Income-carbon footprint relationships for urban and rural households of Iskandar Malaysia. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Majid, Mohammad Rafee and Nordin, Alia N. and Johar, Foziah and Tifwa, H. Y. (2014) Travel emission profile of Iskandar Malaysia neighbourhoods from pre-1980s to 2000s. 8th International Symposium of The Digital Earth (Isde8), 18 (1). ISSN 1755-1315

Majid, Mohammad Rafee and Nordin, Alia N. and Johar, Foziah and Tifwa, H. Y. (2013) Travel emission profile of Iskandar Malaysia neighbourhoods from pre-1980s to 2000s. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug, 2013, Kuching, Sarawak, Malaysia.

Majid, Sherzad Qadir (2012) High performance industrialised buiding system multi-layers slim beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Malin, Rusdy (1994) Penentuan keupayaan optimum tangki simpanan sejuk untuk loji pendinginan udara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mamat, Nor'Adila (2016) De minimis principle and certificate of practical completion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mamat, Normaisharah and Yakub, Fitri and Sheikh Salim, Sheikh Ahmad Zaki (2019) Analysis of controllers in suppressing the structural building vibration. Malaysian Journal of Fundamental and Applied Sciences, 15 (1). pp. 112-116. ISSN 2289-5981

Manivannan, Govin Kumar (2022) Contractors apprehension of doctrine of frustration and Force Majeure clause in construction contracts. Masters thesis, Universiti Teknologi Malaysia.

Mansor, Lydiana (2022) An approach to manage termination due to national interest in clause 52.0 OF public work department form 203A (REV.1/2010). Masters thesis, Universiti Teknologi Malaysia.

Mansor, Nur Syaimasyaza (2011) Notice condition precedent to claim liquidated ascertained damages (LAD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mansor, R. and Low, S. T. (2020) Criteria for occupant well-being: a qualitative study of Malaysian office buildings. Building and Environment, 186 .

Mansur, Shaiful Amri and Mohamad Zin, Rosli and Sea, E. N. (2006) Impact of unplanned schedule compression on project cost. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Marjuki, Mofti (2006) Computerised building cost estimating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marsin, J. M. and Syed Ariffin, Syed Ahmed Iskandar and Raja Shahminan, Raja Nafida (2014) Comparison of legislation concerning people with disability and heritage environment in Malaysia and developed countries. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Marsono, Abdul Kadir and Md. Tap, Masine and Ng, Soon Ching and Makhtar, Ahmad Mahir (2006) Simulation of Industrialised Building System components production. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Marsono, Abdul Kadir and Lee, Siong Wee (2006) Nonlinear finite element analysis of reinforced concrete tube in tube of tall buildings. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Martin, Anthony (2001) Reviewing the construction process using business process reengineering philosophy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marto, Aminaton and Kasim, Fauziah (2003) Characterisation of Malaysian residual soils for geotechnical and construction engineering. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Maruti@Ezani, Syaza Faiqah (2019) Assessment of proposed dams in reducing flood hazard in Kelantan River basin using hydrodynamic model and geospatial techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Marzoughi, Foad (2010) Making a decision model in construction companies regarding to weather risk by statistical method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Maskuriy, Raihan (2014) Application of BIM in early stage design cost estimation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Maskuriy, Raihan and Selamat, Ali and Ali, Kherun Nita and Mahdzir, Akbariah and Maresova, Petra and Krejcar, Ondrej (2021) University spin-off: effective solution on technology transfer in AEC industry for intelligent city transformation. In: 19th International Scientific Conference on Hradec Economic Days, 25 March 2021 - 26 March 2021, Hradec Kralove, Czech Republic.

Masran, Siti Aisyah (2019) Privacy factors of house frontages in Malaysian terrace houses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mat Hassan, Marzuani (2007) Kajian pengurusan fasiliti pangsapuri dari aspek penyelenggaran perkhidmatan : kes kajian : Pangsapuri Pan Vista, Permas Jaya, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mat Isa, Siti Aisah (2014) Problems associated with evaluation of extension of time (EOT) claim in government projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Jusoh, Zairra (2011) Quantum meruit in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Salleh, Maznida Shahila (2011) Kesedaran penyelengaraan fasiliti elektrik di sektor awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mazlan, Elis Mardzianah (2004) Kecacatan bangunan perumahan : kajian punca dan penyelesaiannya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mazloomi, Seyed Maziar and Syed Ariffin, Syed Ahmad Iskandar and Raja Shahminan, Raja Nafida (2014) A comparative analysis of perceptual and demographic predictors of sense of place dimensions in the State Mosques of Malaysia. Asian Journal of Social Psychology, 17 (2). pp. 128-140. ISSN 1367-2223

Md. Azmi, Fatin Afiqah and Mohammad, Mohammad Tahir Sabit (2015) A proposal for a single tribunal of estates distribution in Malaysia. Jurnal Teknologi, 75 (10). pp. 1-16. ISSN 0127-9696

Md. Dalib, Md. Sazali (2013) Korean company practice in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Isha, Mohd. Nasir (2004) Evaluation on current practice in work breakdown structure approach for construction schedules. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Mahdzir, Afwan Hakim (2013) Effectiveness of defensive driving among commercial truck drivers: a case study at MISC integrated Logistics Sdn. Bhd. (MILS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Noor, Norhazilan (2009) Statistical modelling of corrosion growth in marine environment. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Md. Nor, Hasanan and Abd. Muti, Abd. Aziz and Che Puan, Othman and Chik, Abdul Aziz and Ismail, Che Ros and Ling, Tung Chai and Mudiyono, Rachmat (2008) Development of new technologies for interlocking concrete block pavement (ICBP). Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Md. Nor, Hasanan and Ismail, Che Ros (2006) The effect of thickness and laying pattern of paver on concrete block pavement. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Tahir, Mahmood and Mohammad, Shahrin and Yahaya, Nordin and Saad, Sarifuddin and Abd. Rahman, Ahmad Baharuddin (2006) Economic aspects of the use of partial and full strength joints on multi-storey unbraced steel frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Tahir, Mahmood and Osman, Mohd. Hanim and Abd. Rahman, Ahmad Baharuddin and Mohammad, Shahrin and Saad, Sarifuddin and Omar, Noorliyana and Othman, Nor Hazimah and Tan, Cher Siang and Shek, Poi Ngian and Thong , Chin Mun (2007) Design procedure of the use of partial strength joints on multi-storey steel frames using TWP sections and Perwaja Sections. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Md. Tahir, Mahmood and Hussein, Mohd. Azman and Sulaiman, Arizu and Mohamed, Shahrin (2009) Comparison of component method with experimental tests for flush end-plate connections using hot-rolled Perwaja Steel Sections. International Journal of Steel Structures, 9 (2). pp. 161-174. ISSN 1598-2351

Md. Tamami, Ahmad Zulkepli (2002) Pemantauan dan permasaalahan perkhidmatan pembersihan secara outsourcing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Medugu, Idris Nasiru and Majid, Mohammad Rafee and Filho, Walter Leal (2014) Assessing the vulnerability of farmers, fishermen and herdsmen to climate change: a case study from Nigeria. International Journal of Global Warming, 6 (1). pp. 11-4. ISSN 1758-2083

Megat Abdullah, Aminatuzuhariah (2009) Best practices in managing goal and strategies for multi-projects in building construction industry. Jurnal Alam Bina, 15 (1). pp. 1-20. ISSN 1511-1369

Michael, Alabi Muyiwa (2013) The study of claims arising from building collapse. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mintorogo, Danny Santoso and Ahmad, Mohd. Hamdan (2011) Achieving Pakis’s thermal conductivity as architectural building thermal resistant by guarded steady-state hotbox method: part 1. DIMENSI - Journal of Architecture and Built Environment, 38 (2). pp. 73-78. ISSN 0126-219X

Misnan, Mohd. Saidin (2009) Model membangunkan budaya keselamatan dalam firma pembinaan di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Misnun, Mohd. Rozlan (2014) Application of interface management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moayedi, Farzaneh (2013) Consumer behavior on energy efficient cooling devices - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Modu, Mala Ali and Sapri, Maimunah and Ab. Muin, Zafirah (2023) Outsourcing as an approach for facilities management service delivery in social housing within a semi-arid climate. International Journal of Research and Innovation in Social Science (IJRISS), NA (NA). pp. 1164-1180. ISSN 2454-6186

Moeinaddini, Mehdi and Asadi-Shekari, Zohreh and Shah, Muhammad Zaly (2014) Analysing the relationship between park-and-ride facilities and private motorised trips indicators. Arabian Journal For Science and Engineering, 39 (5). pp. 3481-3488. ISSN 1319-8025

Moeinaddini, Mehdi and Asadi-Shekari, Zohreh and Shah, Muhammad Zaly (2014) The relationship between urban street networks and the number of transport fatalities at the city level. Safety Science, 62 . pp. 114-120. ISSN 0925-7535

Moghimi, Vahid (2013) Flexible windows as a mean of achieving user satisfaction in mass housing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Moghimi, Vahid and Mohd. Jusan, Mahmud and Izadpanahi, Payam and Mahdinejad, Jamaleddin (2017) Incorporating user values into housing design through indirect user participation using MEC-QFD model. Journal of Building Engineering, 9 . pp. 76-83. ISSN 2352-7102

Mohamad, Mardiana (2016) Factors affecting the preparation of the construction work programme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad @ Ahmad, Khairil Azizi (2006) Faktor-faktor kejayaan perlaksanaan sistem kualiti ISO9000 di dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Azami, Destilla (2009) The power and authority to issue VS. to approve variation order : the legal perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Nazir, Noor Jannah (2016) Problems associated with acceleration works and its solutions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Nor, N. H. and Muhamad, Norhamidi and Ariffin, A. K. and Ruzi, M. and Jamaludin, Khairur R. and Sufizar, A. (2011) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for multiple performance using grey relational analysis. Journal of Applied Sciences, 11 (10). pp. 1833-1838. ISSN 1812-5654

Mohamad Ramly, Zuhaili and Mohd. Yusof, Zakaria and Mohamad Shukery, Nurshikin and Ismail, Fuziah (2016) Meminimumkan sisa bahan binaan di tapak bina. In: Pengurusan Logistik di Tapak Bina. Penerbit UTM Press, pp. 59-78. ISBN 9789835213656

Mohamad Rasdi, Noor Hajar (2020) Forseeability of damages in negligence related to construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mohamad Shukery, Nurshikin (2017) Flexible multi-criteria integrated performance-based decision model for contractor selection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Yatim, Yahya (2008) An analysis of the effect of staircase intermediate landing floor on the evacuation time. Jurnal Alam Bina, 12 (3). pp. 1-18. ISSN 1511-1369

Mohamad Yatim, Yahya (2012) Optimum escape routes designs and specification for high-rise buildings. In: 3rd International Conference in Construction Industry Proceeding 2012, 10-11 April, 2012, Padang, Indonesia.

Mohamad Zin, Rosli and Mohamad, Mohamad Ibrahim and Mansur, Shaiful Amri and Chan Donald, Bing Tee (2008) Guidelines for the preparation and submission of work schedule for construction project. Malaysian Journal of Civil Engineering, 20 (2). pp. 145-159. ISSN 1823-7843

Mohamed, Abdeliazim Mustafa (2011) Project management consultant (PMC) in Sudanese construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Mohd Sukry and Sagitaningrum, Fathiyah Hakim and Kamaruddin, Samira Albati (2019) Optimization of soil-nailed wall design using SLOPE/W software. Open International Journal of Informatics, 7 . pp. 74-83. ISSN 2289-2370

Mohamed, Rafiza (2002) Analisis faktor-faktor yang mempengaruhi perbezaan harga tender. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Sarajul Fikri and Mong, S. G. and Misnan, Mohd. Saidin (2016) Key characteristics of effective building maintenance and management by local authority in Malaysia. In: International Graduate Conference on Engineering, Science and Humanities, 15-17 Aug, 2016, Johor Bahru, Malaysia.

Mohamed, Sarajul Fikri and Yahaya, Sabiu Baffa and Misnan, Mohd. Saidin and Wan Mahmood, Wan Yusoff (2022) Essential strategies for value management adoption and implementation in Nigerian construction industry. Journal Of Information System And Technology Management (JISTM), 7 (25). pp. 205-217. ISSN 0128-1666

Mohamed, Sarajul Fikri and Yusuf, Ganiyu Amuda (2014) Standard for uniformity in building engineering services price forecast. IAENG Transactions on Engineering Sciences - Special Issue of the International MultiConference of Engineers and Computer Scientists, IMECS 2013 and World Congress on Engineering, WCE 2013 . pp. 183-192.

Mohamed @ Mohd. Adnan, Azmi (2018) Project viability framework for privatized highway projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed Ali, Nasly and Amani, Nima and Abd. Samad, Roslida (2011) Developing a framework of economic model for building component lifecycle repair. Advanced Materials Research, 255-26 . pp. 3893-3897. ISSN 1022-6680

Mohamed Kamar, Haslinda and Kamsah, Nazri and Senawi, Mohd. Yusoff (2013) Computerized simulation of automotive air-conditioning system: a parametric study. International Journal of Computer Science Issues, 1 (1). pp. 787-794. ISSN 1694-0784

Mohamed Khaidzir, Khairul Anwar and Lawson, Bryan (2013) The cognitive construct of design conversation. Research in Engineering Design, 24 (4). pp. 1-17. ISSN 0934-9839

Mohamed Kharoni, Roslee (2003) Aspek pengurusan berkualiti penyenggaraan bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed Sabli, Nor Azlinda (2003) Information exchange in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Nor, Norhaziyah (2011) The viability of online dispute resolution implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammad Soltani, Mohammad Soltani (2020) Households energy consumption and carbon dioxide emissions of Mahabad City, Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mohammad, Mohammad Ibrahim and Abdullah, Arham (2005) Determining the basic principles in managing project schedule for construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohammadi, Mohammad Soleiman (2011) Sustainable housing design in Shiraz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammed, Abdullahi Baba (2016) Assessment of public water distribution using geographic information system in Yola, Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohammed, Miswan @ Abdul Hakim (2012) Critical success factors on implementing life cycle cost in the construction industry. In: Conference.

Mohammed (Penterjemah), Abdul Hakim and Bentley, J. I. W. (1990) Penenderan dan penganggaran binaan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–07–X

Mohandes, Saeed Reza (2014) Fastening technology in construction for sustainability through building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohayidin, Noor Amalina (2014) Variation order in lump sum contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd., Norhazren Izatie and Ali, Kherun Nita (2014) Addressing the needs of gaming approach in hazard identification training. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 212-215.

Mohd., Norhazren Izatie and Ali, Kherun Nita and Bandi, Shamsulhadi and Ismail, Fuziah (2019) Exploring gamification approach in hazard identification training for Malaysian construction industry. International Journal of Built Environment and Sustainability, 6 (1). pp. 51-57. ISSN 2289-8948

Mohd., Norhazren Izatie and Tajul Ariffin, Hamizah Liyana and Abdul Hamid, Muhammad Hamka and Kidam, Kamarizan and Mohammad Ismail, Mohammad Ismail and Ali, Kherun Nita and Mustaffa, Nur Emma and Mohd. Rohani, Jafri and Sabrini, Noor Nabilah and Abdullah, Samsiah (2020) Occupational safety and health construction industry management (OSHCIM): current practice in Malaysia. In: 4th International Conference on Construction and Building Engineering and 12th Regional Conference in Civil Engineering, ICONBUILD and RCCE 2019, 20 - 22 August 2019, Langkawi, Malaysia.

Mohd. Adnan, Yasmin and Mohd. Arif, Nor Adibah and Razali, Muhammad Najib (2022) Exploring green office building choices by corporate tenants in Malaysia. Sustainability, 14 (21). pp. 1-23. ISSN 2071-1050

Mohd. Ali, Darmawaty (2001) Sistem keselamatan data menggunakan algoritma twofish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Ali, Nor Raihana (2000) Analisis keberkesanan sistem pengurusan penyelenggaraan bangunan dalam memenuhi kepuasan dan keselesaan penyewa : satu tinjauan di Bandar Seremban. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Amin, Mohd. For and Kassim, Azman and Mohamad, Edy Tonnizam and Ong, Heng Yau (2003) Classification of filled joint based on the characteristics of its constitutive components. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amir, Ahmad Syahid and Tareq, Mohammad Ali (2015) Apples to oranges: harmonising home buyer preferences in Japan and Malaysia through standards comparison. In: International Conference on Sustainability Initiatives (ICSI) 2015 in Conjunction With 8th Asean Environmental Engineering Conference (AEEC), Kuala Lumpur, Malaysia, 24-25 August 2015, 24-25 Aug, 2015, Kuala Lumpur, Malaysia.

Mohd. Ariffin, Mohd. Azreen (2006) Sistem pengurusan penyenggaraan bangunan bagi struktur konkrit bertetulang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Azmin, Nurul Azhani (2020) Muslim tourists' perceived value, satisfaction, religiousity and behavioural intention in patronizing Muslim friendly hotels. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mohd. Bashah, Imee Nurshafinaz (2016) Interpretation dilemma: payment response in CIPAA 2012. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Danuri, Mohd. Suhaimi and Mohd. Ishan, Zahira and Mustaffa, Nur Emma and Abdul Karim, Saipol Bari and Mohamed, Othman and Hanid, Mahanim (2016) Dispute avoidance procedure:formulating a workable legal system in the Malaysian construction industry. Journal of Design and Built Environment, 16 (1). pp. 37-46. ISSN 2232-1500

Mohd. Fuza, Zatul Iffah and Ismail, Hairul Nizam and Mohd. Isa, Sulaiha (2015) Divulging the challenges faced by urban based tour operator in Malaysia. In: 13th International Congress of Asian Association - APSA 2015: Towards an Asian Urban Agenda, 12-14 August, 2015, Johor Bahru, Malaysia.

Mohd. Ibrahim, Mohd. Shukhairi (2020) Keperluan sistem penuaian air hujan sebagai syarat kelulusan pelan bangunan pihak berkuasa tempatan Negeri Perak. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Isa, Norliza and Zakaria, Adila (2022) Thematic review on Islamic design quality in hospital design in Malaysia. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 417-429. ISSN 0128-178X

Mohd. Jusan, Mahmud and Alaraji, Khwla (2014) Assessment of perceived flexibility in house design using conjoint analysis(CA). International Journal of Applied Engineering Research, 9 (14). pp. 2473-2486. ISSN 0973-9769

Mohd. Kamal, Nur Haafizhah and Mat Amin, Zulkarnaini and Mohamad, Nurafifah (2020) The effect of ground penetrating radar (GPR) image reflection on different pipes and soil. In: 10th IGRSM International Conference and Exhibition on Geospatial and Remote, IGRSM 2020, 20 October 2020 - 21 October 2020, Kuala Lumpur, Virtual.

Mohd. Khalid, Mohd. Khairul (2014) Characterization of space charge in the solid insulating materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Khalid, Rozline (2004) Tahap kepuasan dan harapan klien terhadap pengurus projek masa kini. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nasira, Siti Rashidah and Abd. Majid, Muhd. Zaimi (2006) Project cost performance forecasting system. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Noor, Mohd. Nasir (2010) Challenges in coordination process for tall building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Nazali (2002) Pembangunan pelan pengurusan krisis kebakaran di bangunan tinggi : kes kajian : Bank Industri & Teknologi Malaysia Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Noor, Nurul Izza (2016) Perkembangan gaya rupa mukaan senibina Masjid Bandar dan Masjid Jajahan di Kelantan Darul Naim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Nordin, Ahmad Ridhuan (2002) Perbandingan tempoh masa penyiapan projek. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Raid, Maryanti (2013) Kepentingan dan sumbangan taman atas bumbung dalam penilaian green building index (GBI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Rasdi, Mohd. Tajuddin and Syed Ariffin, Syed Ahmad Iskandar (2008) The development of the modern ideas of Islamic architecture in the modern Malaysia. Project Report. Faculty of Built Enviroment, Skudai, Johor. (Unpublished)

Mohd. Raslim, Faraziera (2008) Differing site condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Ripin, Mohd. Yusri (2008) Payment issues of architect's professional fees. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Rodzi, Rodziana (2008) Faktor penghalang perlaksanaan pengurusan kualiti menyeluruh (TQM) menurut perspektif kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohd. Roshdi, Farrah Rina (2013) Challenges of quality assessment system (QLASSIC) in construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Said, Naqiyatul Amirah and Tajul Ariffin, Hamizah Liyana and Mustaffa, Nur Emma (2020) Compelling outgrowth of engineering, procurement and construction contract in Malaysian oil and gas industry. Malaysian Construction Research Journal (MCRJ), SI9 (1). pp. 94-102. ISSN 1985-3807

Mohd. Said, Sorfina ‘Izzati (2014) Assessment of loss and expense for extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Salleh, Syahiirah (2020) Three dimensional compact abstract cell complexes topological data structure for buildings in CityGML. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Mohd. Sarman, Asmawan (2004) Sistem kontrak reka dan bina : analisa implikasi arahan perubahan kerja ke atas kos dan masa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shah, Zulkarnain (2000) The incorporation of maintenance requirements and planning at the design and construction stages : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sharifuddin, Roqiyah Nur (2015) Mutual termination agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Subha, Nurul Adilla and Rahmat, Mohd. Fua’ad and Ishaq, Kashif M. (2011) Controller design for a pilot-scale heating and ventilation system using fuzzy logic approach. Jurnal Teknologi (Sciences and Engineering), 54 . pp. 123-139. ISSN 0127-9696

Mohd. Yunos, Mohammad Harith (2015) The prevailing practice in deciding the practical completion of construction work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yunos, Mohd. Sharil (2002) Kriteria pemilihan kontraktor bagi projek rekabentuk dan bina : kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yusof, Mohd. Fadil and Ismail, Hairul Nizam (2015) The evolvement of brand identity of Langkawi Island, Malaysia. In: 13th International Congress of Asian Planning School Associations 2015 - Towards an Asian Urban Agenda, 12-14 August, 2015, Johor Bahru, Malaysia.

Mohd. Yusof, Zakaria (2005) Ke arah pengurangan kebergantungan tenaga kerja asing di sektor binaan. Jurnal Alam Bina, 7 (2). pp. 71-86. ISSN 1511-1369

Mohd. Yusop, Imran (2010) Adjudicator determines own jurisdiction : a prediction for the proposed construction industry payment and adjudication act. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yusop, Imran (2010) Adjudicator determines own jurisdiction: a prediction for the proposed construction industry payment and adjudication act. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Yusuf, Aminah and Abd. Majid, Muhd. Zaimi and Zakaria, Rozana (2001) An effectiveness of communication in project undertaking: problems and constraints. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Zainal, Ahmad Mawardi (2008) Incorporating sustainable concept to improve architectural design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zaki, Noor Irza and Fathi, Mohamad Syazli (2014) Implementing green building procedures for the construction of residential buildings in Abu Dhabi. International Journal Of Interdisciplinary Research And Innovations, 2 (2). pp. 1-29. ISSN 2348-1218

Mohd. Zin, Abdullah Asuhaimi and Soomro, Dur Muhammad (2011) Critical study of underfrequency load shedding schemes. International Review of Electrical Engineering (IREE), 6 (3). pp. 1287-1296. ISSN 1827-6660

Mohd. Zin, Hamim (2013) Delay and extension of time: the real issue in conflicts between time-bar provisions and prevention principle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Zin, Nurshafeeqah (2013) Comparison of collateral warranty and indemnity in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohmad Zainordi, Zainab (2006) Contractor's liability to third party for defective works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohsin, Aminah and Berahim, Nur and Firdaus, Nasrul Faiz (2022) Punca pembangunan plot-plot kediaman tanpa kebenaran dan implikasi terhadap agensi kerajaan. Sains Humanika, 14 (1). pp. 26-34. ISSN 2289-6996

Mokhtar, Noor Halwani (2012) Extension of time in commencement of arbitration proceedings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Moradi, Behrang and Ahmad, Mohd. Hamdan and Dokoushkani, Farimah (2014) Islamic thoughts and individuals' actions in the built environment. Global Journal Al-Thaqafah, 4 (2). pp. 59-68. ISSN 2232-0474

Moravveji, Mohammad Yousef (2013) Selection of the industrialized building material supplier by analytic hierarchy process method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Morshidi, Mohammad and Muhammad Hussein, Muhammad Zaly (2020) The effect of parenting style on adolescent’s perception towards road safety. International Journal of Built Environment and Sustainability, 7 (1). pp. 11-20. ISSN 2289-8948

Mostafapour, Saman (2013) Assessment of value management by using earn value technique in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Motsa, Caleb Dumisa (2006) Managing contruction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mousavi, Seyed Mohammad (2013) Environmentally- sustainable affordable design elements in housing : (A case Stydy on middle-income people in the context of Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mudiyono, Rachmat and Md. Nor, Hasanan and Ling, Tung Chai (2006) The effect of joint width between blocks in concrete block pavement. In: Regional Postgraduate Conference on Engineering and Science (RPCES 2006), 26th - 27th July 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Muhamad, Pauziah (2002) An exergetic analysis of a home air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad Rawai, Norshakila (2020) Project management information system implementation framework for building construction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Muhammad, M. Z. and Mustapa, M. (2020) A review of facilities information requirements towards enhancing building information modelling (BIM) for facilities management (FM). In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Muhammad, Rafeq Razak and Johar, Foziah and Abd. Khalil, Rabiatul Adawiyah (2016) The impact of Iskandar Malaysia development on urban amenities. Planning Malaysia, 4 (4). pp. 121-134. ISSN 1675-6215

Muhammad, Z. and Johar, F. (2017) A conceptual framework for evaluating the success of public-private partnership (PPP) projects. Advanced Science Letters, 23 (9). pp. 9130-9134. ISSN 1936-6612

Muhammad Lawan, Mustapha and Md. Tahir, Mahmood (2015) Strength capacity of bolted shear connectors with cold-formed steel section integrated as composite beam in self-compacting concrete. Jurnal Teknologi, 77 (16). pp. 105-112. ISSN 0127-9696

Muhammad Sudin, Mazlin (2022) Anti-suit injunction in the context of arbitration agreement. Masters thesis, Universiti Teknologi Malaysia.

Muhammad Yuwono, Aditya (2011) Cost control in construction phase in joint operation contractors : a case study of joint operation contractors in Sumatera Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Muksain, Marni Ainin Syahirah and Nasir, Nasyairi Mat and Mohd. Nordin, Rumaizah and Mohd., Suzila and Brahim, Juliana (2023) Malaysian construction industry crisis revolution: The contributing factors. In: 3rd International Conference on the Built Environment and Engineering: Fostering a Transpicuous Construction Industry, IConBEE 2022, 17 October 2022 - 19 October 2022, Putrajaya, Malaysia.

Munisamy, Thavarajah (2000) Contractors' approaches to risk indentification at the tendering stage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustaffa, Nur Emma and Ali, Kherun Nita and Yong, Vee Cheong (2015) The integration of Building Information Modelling (BIM) in a relationship-based procurement method. In: Seoul International Conference on Engineering and Applied Sciences 2015, 8-10 Jan, 2015, Korea.

Mustaffa, Nur Emma and Tajul Ariffin, Hamizah Liyana and Othman, Norazam and Shamsudin, Shahida Shaima (2019) Application of direct payment clause 30A.0 of the Asian International Arbitration Centre (AIAC) standard form of contract (with quantities). International Journal of Built Environment and Sustainability, 6 (1). pp. 44-50. ISSN 2289-8948

Mustaffa, Nur Emma and Xiong, Shaun Kok Zhen and Mustapa, Muzani and Tajul Ariffin, Hamizah Liyana and Ismail, Fuziah (2020) Management of contractual risks in a BIM-enabled project. In: 2020 International Conference on Construction Digitalisation for Sustainable Development: Transformation Through Innovation, CDSD 2020, 24 - 25 November 2020, Hanoi, Vietnam.

Mustaffar, Mushairry and Ahmad, Azhar and Sa'ari, Radzuan (2005) Investigating the feasibility of photogrammetric area-based image matching technique in the measurement of three-dimensional deflections of structures. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mustaffar, Mushairry and Katimon, Ayob and Hanapi, Muhammad Nassir and Sa'ari, Radzuan (2006) Hydrological and hydraulic study of water management system study for PT Bhumireksa Nusasejati, Sumatera, Indonesia. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Mustapha, Bawa (2011) Comparison between the standard forms of building contract used in Nigeria and Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

N

Nading, Nadiana (2015) Domestic tourist’s perception on Sarawak ethnic native’s food. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nahid, Syed Farhan (2022) Suitability of fidic contract over the Public Procurement ACT (PPA) 2006 for local public projects in Bangladesh. Masters thesis, Universiti Teknologi Malaysia.

Najafpour, Hamed (2015) Factors influencing sense of security in residential neighbourhood in Johor Bahru. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Najafpour, Hamed and Bigdeli Rad, Vahid and Lamit, Hasanuddin (2014) The systematic review on sense of security in urban neighborhoods. Life Science Journal, 11 (10). pp. 89-97. ISSN 1097-8135

Najafpour, Hamed and Bigdeli Rad, Vahid and Lamit, Hasanuddin and Rosley, Muhamad Solehin Fitry (2014) The systematic review on quality of life in urban neighborhoods. Life Science Journal, 11 (7). pp. 355-364. ISSN 1097-8135

Nashirudin, Mohd. Azlan Syah and Jasmi, Kamarul Azmi (2008) Cadangan Penyediaan tempat Wuduk yang Efisien. In: Pengurusan Berkualiti Memacu Kecemerlangan Pengurusan Masjid. Penerbit UTM , Johor, pp. 124-140. ISBN 978-983-52-0508-8

Nasid Masrom, Md. Asrul (2007) Nature of delay in nominated subcontracting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nasr, Ali Hadian (2014) Interconnecting outriggers system in tall building structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawi, Nur Muizzah (2013) Implementation of noise management in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nayan, Roselan (2010) Valuation of interim payment : contract terms and statutes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nayan, Roselan and Mustaffa, Nur Emma and Judi, Siti Suhana (2017) Valuation of interim payment: issues encountered by the parties involved in relation to interim payment. Journal of Built Environment, Technology and Engineering, 2 . pp. 133-141. ISSN 0128-1003

Ng, Chee Kuang (2010) Recovery of interest / financing charges due to prolongation in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Wai Tuck (2021) Effectiveness of passive cooling strategies of indoor thermal conditions for terrace house under hot and humid climate. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Ng, Weng Seng (2001) Analysis of factors of non-excusable delays that influence contractors' performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Weng Seng and Md. Yusof, Aminah (2006) The success factors of design and build procrement method: a literature visit. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ng, Ying Keng (2003) Numerical simulation of air conditioned space. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngadiman, Norshafadila and Samsudin, Salfarina and Mohsin, Aminah and Hussin, Khadijah and Mohammad, Nur Khairiyah (2023) Elements of alteration in the application and ownership process of the affordable housing policy in Johor. International Journal of Academic Research in Business and Social Sciences, 13 (11). pp. 885-895. ISSN 2222-6990

Ngah, Ibrahim and Zulkifli, A. S. (2014) Participatory approach in planning for low carbon and eco-village: a case of Felda Taib Andak. 8th International Symposium of The Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Ngu, Heng Hoo (2002) Improving reporting system in construction industry using IT. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nguru, Adamu Ibrahim (2010) Resilience in tourism business (a case study of Cherating Lama Village, Pahang). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nik Abdullah, Nik Abdul Hafiz (2015) Application of good faith as necessary limits in exercising the termination for convenience clause. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nikpour, M. and Kandar, Mohd. Zin and Ghomeshi, M. and Moeinzadeh, N. and Ghasemi, M. (2011) Investigating the effectiveness of self-shading strategy on overall thermal transfer value and window size in high rise buildings. World Academy of Science, Engineering and Technology, 74 . pp. 165-170. ISSN 2010-376X

Nikpour, Mansour and Kandar, Mohd. Zin and Ghasemi, Mohsen and Fallah, Hossein (2011) Study of the effectiveness of solar heat gain and day light factors on minimizing electricity use in high rise buildings. International Journal of Civil and Environmental Engineering, 5 (1). pp. 21-25. ISSN 2010-376X

Nikpour, Mansour and Kandar, Mohd. Zin and Ghasemi, Mohsen and Ghomeshi, Mohammad and Safizadeh, Mohammad Reza (2012) Heat transfer reduction using self shading strategy in energy commission building in Malaysia. Journal Of Applied Sciences, 12 (9). pp. 897-901. ISSN 1812-5654

O

Obed, Gingerlla (2014) Utilizing pretty typology in local community participation in homestay development: a case study of homestay Parit Penghulu Sungai Rambai, Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Oluwole, Alejo Ayodele (2012) Comparative study of defect liability period practices between Malaysia and Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Buit Environment.

Omar, Hartini (1997) Analysis of energy consumtion in building using 'SHEAP' (Simplified Hourly Energy Analysis Package). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Nur Shahirah (2010) Perlaksanaan Sistem Binaan Berindustri (IBS) bagi mengatasi masalah dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Omar, Wahid and Noor Mohamed, Roslli (2002) The performance of pretensioned prestressed concrete beams made with lightweight concrete. Jurnal Kejuruteraan Awam, 14 (1). pp. 60-70. ISSN 0128-0147

Omar, Wahid and Awang, Abdullah Zawawi (2006) A fundamental study of improving ductility of reinforced high-strength concrete (HSC) members. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ooi, Poh Poh (2010) Profile of construction payment dispute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Opeyemi, Samuel Williams and Adul Hamid, Razali and Misnan, Mohd. Saidin (2019) Causes of building construction related accident in the south-western states of Nigeria. International Journal of Built Environment and Sustainability, 6 (1). pp. 14-22. ISSN 2289-8948

Osman, Noor Azahar (2008) Analisis kecacatan semasa pembinaan dan kualiti bangunan di celcom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Riduan (2011) Mengenalpasti punca-punca mempengaruhi siling runtuh di peringkat pelaksanaan dan pengawasan projek di bangunan kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ossen, Dilshan Remaz (2008) Building simulation for energy efficient solar shading. In: Methodology in Architectural Research. Penerbit UTM , Johor, pp. 58-79. ISBN 978-983-52-0592-7

Othman, Nur Syaheera (2013) Motivation and barrier factors of environmental management systems implementation in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Norazam (2004) Kandungan dokumen kontrak pembinaan: perbandingan antara teori dan amalan. Jurnal Alam Bina, 6 (1). pp. 55-65. ISSN 1511-1369

P

Panahi, Babak and Preece, Christopher Nigel and Wan Zakaria, Wan Normeza and Rogers, John and Moezzi, Elena (2014) Review and conceptualization of value congruence toward construction industry in Malaysia. International Journal of Academic Research in Business and Social Sciences, 4 (10). pp. 611-630. ISSN 2308-3816

Pang, Sheh Haur (2003) The implementation of design and build procurement approach in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pang, Sheh Haur (2004) The implementation of design and build procurement approach in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Papargyropoulou, E. and William Padfield, Rory and Harrison, O. and Preece, Christopher Nigel (2012) The rise of sustainability services for the built environment in Malaysia. Sustainable Cities and Society, 5 (1). pp. 44-51. ISSN 2210-6707

Pau, Chung Leng and Abdul Majid, Roshida and Abdul Rahman, Noraslinda and Ossen, Dilshan Remaz and Mohd. Razif, Farhana (2019) Field investigation of indoor thermal performance in Malaysia air-welled terraced house. International Journal of Built Environment and Sustainability, 6 (3). pp. 33-41. ISSN 2289-8948

Paydar, Mohammad and Said, Ismail (2012) Commuters' perception of legibility and complexity with respect to path choice in central business district of Kuala Lumpur. International Transaction Journal of Engineering, Management & Applied Sceinces & Technology, 3 (3). pp. 345-362. ISSN 2228-9860

Permana, A. S. and Ludin, A. N. M. and Majid, M. R. (2017) The interplay of spatial policy, travel behaviour and air quality in Iskandar Malaysia. Planning Malaysia, 15 (3). pp. 1-12. ISSN 1675-6215

Permana, Assad Idea (2015) Contractor’s liability under unforeseen ground conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Pison, Zirwatul Hana (2007) Managing construction of telecommunication tower projects in Celcom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Pondi, Shafiyah and Efendi, Jon and Ho, Chin Siong and Yuan, Laisin and Chandren, Sheela and Hadi, Nur (2014) The study of albumin release from silica/albumin as a potential drug delivery carrier. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 113-117. ISSN 0127-9696

Prakasya, Affan (1999) Strategi syarikat pembinaan dalam perbezaan iklim ekonomi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Prawoto, Yun and Moin, A. and Tadjuddin, M. and Wan Nik, W. B. (2011) Effect of microstructures on SCC of steel: field failure analysis case study and laboratory test result. Engineering Failure Analysis, 18 (7). pp. 1858-1866. ISSN 1350-6307

Prayetno, Eko (2013) Wing-in-ground for rescue operation in Kepulauan Riau. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Putro, Anggoro (2012) The cost overruns in green building development : case study Ministry of Public Works new green building project Republic of Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Puzi, M. A. M. and Ismail, H. N. (2017) Critical review on the existence of transgenerational entrepreneurship in tourism businesses: current trend and interest. Planning Malaysia, 15 (3). pp. 105-114. ISSN 1675-6215

Q

Quah, Lee Hui (2012) A multi-criteria generic process model for selecting fire protection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Qureshi, Salman and Ho, Chin Siong (2014) From digital earth to digital neighbourhood: a study of subjective measures of walkability attributes in objectively assessed digital neighbourhood. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

R

Rabiee, Asmaa (2013) The influence of the discord in building distinctivness on the perception of tehran’s city identity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rachmadi, Erwando (2011) Cost planning in water resources infrastructure maintenance project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rad, Vahid Bigdeli and Najafpour, Hamed and Ngah, Ibrahim and Shieh, Esmaeil and Rad, Hamid Bigdeli (2014) The systematic review on physical activity in urban neighborhoods. Life Science Journal, 11 (9). pp. 14-22. ISSN 1097-8135

Rafieizonooz, Mahdi and Salim, Mohd. Razman and Khankhaje, Elnaz and Hussin, Mohd. Warid and Zarebidaki, Ali and Salmiati, Salmiati (2015) Determining the causes of delay by using factor analysis in Tehran’s construction projects. In: Applied Mechanics and Material, 2015.

Rahim, Nur Hapsah (2008) Direct payment to domestic subcontractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahman, Shafique and Lim, Yaik Wah and Nargis, Nabilah (2023) A study of vernacular building materials in Bangladesh based on embodied energy and environmental performance. In: International Graduate Conference of Built Environment and Surveying 2023, GBES 2023, 17 September 2023 - 18 September 2023, Hybrid, Johor Bahru, Johor, Malaysia.

Rahmani, Behzad (2013) Effects of double skin facade configurations on decreasing solar heat gains in high-rise office buildings in the tropical climate of Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahmat, Maziar Ghabel (2013) Analysis of industrialized building system block work with ETABS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raja Mohd. Yazit, Raja Nur Syaheeza (2015) 'Third place' environment in residential school design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rakhshanifar, Mansooreh (2013) Health and safety in refurbishment projects involving demolition work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raman, Rajandran Suppiah (2011) Defects and improving the maintainability of buildings at the advance technical training centres. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Rameli, Alias and Johar, Foziah and Ho, Chin Siong (2007) A framework for the measurement of the effectiveness of planning system in managing housing supply. In: ASEAN Post Graduate Seminar in Built Environment, 3rd-5th Dec. 2007, University of Malaya.

Ramli, Mohamad Ali (2010) Application of six sigma philosophy for quality management system in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Mohd. Zamri and Ahmad, Baderul Hisham and Abdul Rahman, Azlan (2005) Theoretical assessment of bridge structural integrity from vibration signature analysis. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ramli, Raiha Azene (2015) Assessing loss and expenses claim by prolongation cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ramly, N. and Ghafar, M. and Alel, Mohd. Nur Asmawisham and Adnan, Azlan (2014) Rapid visual screening method for seismic vulnerability assessment of existing buildings in Bukit Tinggi, Pahang, Malaysia. International Journal of Structural Analysis & Design, 1 (2). pp. 10-13. ISSN 2372-4102

Rashib, Rahmat (2003) Masalah penyiasatan tapak dan kesannya terhadap perancangan projek. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasiah, Kumarason V. (2004) Budaya keselamatan dalam pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasid, Nur Farah Farhana (2012) 'Best endeavours' for granting extension of time in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rasid, Nur Farah Farhana (2012) Best endeavours' for granting extension of time in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rasidi, Daniel Iskandar Sulaiman (2022) Factors and strategies to overcome low adoption of adjudication in Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Rasidi, Mohd. Hisyam and Jamirsah, Nurzuliza and Said, Ismail (2012) Urban green space design affects urban residents’ social interaction. In: AicE-Bs2012 Cairo ASIA Pacific International Conference on Environment-Behaviour Studies, 31 October-2 November 2012, Mercure Le Sphinx Cairo Hotel, Giza, Egypt.

Rastegar, Niloufar (2013) Effective parameters on street vitality in Johor Bahru City Center. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ratih Kusumawati, Ratih Kusumawati (2012) Issues in implementing electronic tendering in Indonesian’s construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rayeg, Olivia (2009) Contractor's rights in the event of employer's insolvency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Razack, N. T. A. A. and Muhamad Ludin, Ahmad Nazri (2014) Ecological footprint and food consumption in Minna, Nigeria. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). pp. 1-5. ISSN 1755-1315

Razak, Khamarrul Azahari and Yuen, Florence Sook Kuan and Mohamad, Zakaria and Razab, Razain and Mat Yusoff, Habibah Hanan (2015) Characterisation of post earthquake induced debris flow using airborne lidar data. In: Seminar Bencana Alam 2015 (Bencana 2015), 1-2 Dec, 2015, Sabah, Malaysia.

Razali, Ahmad Firdaus and Mohd. Ariff, Mohd. Farid and Majid, Zulkepli and Darwin, Norhadija and Aspuri, Anuar and Mohd. Salleh, Mohd. Faizi (2020) Three-dimensional (3D) as-built reconstruction from laser scanning dataset. In: 10th IEEE International Conference on System Engineering and Technology, ICSET2020, 9 November 2020, Shah Alam, Malaysia.

Razali, Muhammad Najib and Mohd. Adnan, Yasmin (2012) Transparency in Malaysian property companies. Property Management, 30 (5). pp. 398-415. ISSN 0263-7472

Razali, Rasidah and Ho, Chin Siong and Lai, Sin Yuan and Chandren, Sheela and Nur, Hadi (2014) Some aspects of particuology in heterogeneous catalysts. Jurnal Teknologi (Sciences and Engineering), 69 (5). pp. 95-101. ISSN 0127-9696

Razalli, Ziyan (2017) Redefining reading spaces typology for street children of Chow Kit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ren, Khew Kai and Mohd., Norhazren Izatie and Ali, Kherun Nita and Bandi, Shamsulhadi and Ismail, Fuziah (2022) Design phase of gamification framework for hazard identification training in construction industry. International Journal of Interactive Mobile TechnologiesVolume , Issue , Pages -, 16 (2). pp. 113-128. ISSN 1865-7923

Rezaeianpakizeh, Mohammad (2012) Structural system analysis and design for safe house. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Richard, W. Bukowski and P., E. and Fsfpe, Fsfpe and Yossy, Hirano and Rackliffe, Tony (2001) Standards Linkages To A Performance-Based Regulatory Framework. Jurnal Teknologi B, Universiti Teknologi Malaysia, 34 (B). pp. 1-11. ISSN 0127-9696

Ridzuan, Nurfairunnajiha and Ujang, Uznir (2023) Investigating the influence of 3D building models on pedestrian wind comfort through wind computational fluid dynamics analysis. In: International Graduate Conference of Built Environment and Surveying 2023, GBES 2023, 17 September 2023 - 18 September 2023, Hybrid, Johor Bahru, Johor, Malaysia.

Rilling, Dirk and Saik, Han Siang and Soh, Hui Siang (2006) Thermal behaviour of residential buildings in South-East Asia through dynamic simulation. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Rizal, Shah and Syed Ariffin, Syed Ahmad Iskandar (2019) Aksesibiliti surau di dalam pusat membeli-belah sebagai sebuah pusat ibadat Islam. Journal of Social Science and Humanities, 16 (1). pp. 1-19. ISSN 1823-884x

Romli, Hajaratul Azila (2015) Delay in settlement of final account. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Roshan, Mohsen and Kandar, Mohd. Zin and Najafpour, Hamed and Ossen, Dilshan Remaz and Ghasemi, Mohsen and Gharakhani, Alireza and Torabi, Mahdi (2014) Analysis of Anidolic daylighting system parameters in tropical climate. Life Science Journal, 11 (8). pp. 171-176. ISSN 1097-8135

Rostami, Raheleh (2012) Public perceptions and preferences of historical Persian Gardens in contemporary urban context. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rostami, Raheleh and Khoshnava, Seyed Meysam and Lamit, Hasanuddin (2014) Heritage contribution in sustainable city. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Rostami, Raheleh and Lamit, Hasanuddin and Khoshnava, Seyed Meysam (2013) Application of soft-wares in green and sustainable construction: a case study in Malaysia. Asian Journal of Microbiology, Biotechnology and Environmental Sciences, 15 (2). pp. 425-432. ISSN 0972-3005

Rostami, Raheleh and Lamit, Hasanuddin and Khoshnava, Seyed Meysam (2014) The role of historical persian gardens on the health status of contemporary urban residents gardens and health status of contemporary urban residents. EcoHealth, 11 (3). pp. 308-321. ISSN 1612-9202

Rozamurtina, Dewi (2011) Negotiation for disputes settlement in construction claim : a case study on Air Lakitan sub-project-stage 1, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rozana, Mohamed Salleh and Nur Emma, Mustaffa and Nafisah, Abdul Rahiman (2020) The adoption of building information modelling and intelligent contract to payment process in Malaysian conventional contract. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 1378-1387. ISSN 1546-1955

Rui, Yin and Yaik Wah, Lim and Cher Siang, Tan (2021) Construction project management based on building information modeling (BIM). Civil Engineering and Architecture, 9 (6). pp. 2055-2061. ISSN 2332-1091

Rusli, Noradila and Majid, M. Rafee (2014) Monitoring and mapping leaf area index of rubber and oil palm in small watershed area. IOP Conference Series: Earth and Environmental Science, 18 (1). ISSN 1755-1315

Rusli, Noradila and Majid, Mohammad Rafee and Md. Din, Ami Hassan (2014) Google Earth's derived digital elevation model: a comparative assessment with Aster and SRTM data. IOP Conference Series: Earth and Environmental Science, 18 (1). ISSN 1755-1315

S

Sahimi, Nurul Nadiah (2016) Adapting bronfenbrenner bioecological model at the preschool within the double storey residential building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Saad, Sharima (2000) Kajian hubungan rekabentuk, fungsi dan kos kemudahan bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saad, Sk Sakif and Khan, Tareef Hayat (2017) A structural solution for vertical expansion of single story terrace row houses in Malaysian context. Journal of Civil and Construction Engineering, 3 (1). pp. 1-6. ISSN 2457-001X

Sabiu, Baffa Y. and Mohamed, Sarajul Fikri and W. Mahmood, Yusoff (2020) Towards a readiness assessment model for value management in construction industry. In: Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, Putrajaya, Malaysia.

Sabri, Soheil and Muhamad Ludin, Ahmad Nazri and Majid, Mohammad Rafee (2013) Ubiquitous geospatial concept in evolution of the macro and micro spatial planning. In: 8th International Symposium of the Digital Earth, ISDE 2014, 26-29 Aug,2013, Kuching, Sarawak, Malaysia.

Sadeghpour, Mehrnaz (2013) Perception and attitude of Middle East tourists towards travel in Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sadry, Somayeh Roustaei (2014) Visual representation of nature in the library. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sahibudin, Shafika (2009) Contractor's liability as an occupier of site during construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sahlan, Shafishuhaza and Mohd. Fazli, Mohd. Faiz and Abdul Wahab, Norhaliza (2012) Automatic controlled fan. In: Process Tomography & Instrumentation -Series 9. Penerbit UTM, Skudai, Johor, pp. 169-188. ISBN 978-983-52-0816-4

Said, Ismail (2001) Pluralism In Terrace Housing Community Through Ethnic Garden. Jurnal Teknologi B (35B). pp. 41-53. ISSN 0127-9696

Said, Ismail and Desa, Abdul Malek and Syed Ariffin, Syed Ahmad lskandar (2008) Constructing timber architecture : merging the skills of architect, carpenter and masonry workers. Jurnal Alam Bina, 12 (3). pp. 97-108. ISSN 1511-1369

Said, Ismail and Kei, Saito and Yeo, Owen Thian Seng (2014) Quantitative study of green area for climate sensitive terraced housing area design in Malaysia. IOP Conference Series: Earth and Environmental Science, 18 (1). ISSN 1755-1315

Saidin, Aminuddin (2015) Claims for additional preliminaries costs due to project prolongation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sainee, Norazean (2015) Issues associates with communicating the architect notice by means of e-mail under PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salcedo, Larika Kay Baldestamon (2017) Reservation of rights in construction claims. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Saleh, Abdul Latif and Aliabadi, MH (1998) Crack growth analysis in reinforced concrete using BEM. Journal of Engineering Mechanics, 124 (9). pp. 949-958. ISSN 0733-9399

Salleh, Kamarul Zaman (2004) Penilaian keperluan kelayakan tambahan perunding pengurusan projek (PPP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Hazwani (2014) Wind effects on symmetrical multiple core wall system of high-rise building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Nur Jazlianna (2014) Profile of construction contractual claims. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Samuel, Williams Opeyemi (2019) Accident prevention model for the building construction industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sanni, Afeez Olalekan and Hashim, Maizon (2014) Building infrastructure through public private partnerships in sub-Saharan Africa: lessons from South Africa. 3rd Cyprus International Conference on Educational Research (CY-ICER 2014), 143 . pp. 133-138. ISSN 1877-0428

Sanusi, Intan Safina (2015) Termination procedures of projects by the public works department (PWD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sanusi, Saiful Rizan (2004) Tuntutan pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sapeciay, Zukfli (2007) Summary judgement in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sapian, Abdul Razak (2004) Possibilities of using void to improve natural cross ventilation in high-rise low-cost residential building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sapri, Maimunah and Muhammad, Shehu (2010) Monitoring energy performance in higher education buildings for sustainable campus. Malaysian Journal of Real Estate, 5 (1). pp. 18-25. ISSN 1823-8505

Sarkile, Abubakar Kawuwa and Ahmed, Sani Aminu and Bashir, Faizah Mohammed and Dodo, Yakubu Aminu (2016) A review of retractable vault covered housing for the Fulbe nomads of Nigeria. Journal of Multidisciplinary Engineering Science and Technology (JMEST), 3 (1). pp. 3818-3824. ISSN 3159-0040

Sarlati, Sogol (2013) Acoustic quality for classrooms in Faculty of Civil Engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seghier, Taki Eddine and Khosakitchalert, Chavanont and Lim, Yaik-Wah (2022) A BIM-based method to automate material and resources assessment for the Green Building Index (GBI) criteria. In: 4th International Conference on Civil Engineering and Architecture, ICCEA 2021, 10 - 12 July 2021, Virtual, Online.

Seghier, Taki Eddine and Lim, Yaik Wah and Ahmad, Mohd. Hamdan and Samuel, Williams Opeyemi (2017) Building envelope thermal performance assessment using visual programming and BIM, based on ETTV requirement of green mark and GreenRE. International Journal of Built Environment and Sustainability, 4 (3). pp. 227-235. ISSN 2289-8948

Seghier, Taki Eddine and Lim, Yaik-Wah and Harun, Muhamad Farhin and Ahmad, Mohd. Hamdan and A. Samah, Azurah and Abdul Majid, Hairudin (2022) BIM-based retrofit method (RBIM) for building envelope thermal performance optimization. Energy and Buildings, 256 (NA). pp. 1-20. ISSN 0378-7788

Sekak, S. N. A. A. and Rahmat, I. and Ahmad, N. and Junus, Y. M. (2016) The study of energy efficiency performance in refurbishment projects. Advanced Science Letters, 22 (5-6). pp. 1640-1642. ISSN 1936-6612

Seliman, Mohamad Syahmi (2016) Arbitration agreement in subcontract: incorporation by reference. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Senawi, Mohd. Yusoff (1999) Development of a building energy analysis package (BEAP) and its application to the analysis of cool thermal energy storage systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Senawi, Mohd. Yusoff (1992) Software development for building energy analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Seng, Hansen (2012) Study on the management of engineering procurement and construction (EPC) project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Senin, Zamri and Mohamad Yatim, Yahya and Zolkefly, Siti Asmah and Mahpot, Noor Laila and Md. Isa @ Mansor, M. Ruhaifi (2022) Fire safety awareness among Malaysian Public Hospital. Specialusis Ugdymas Special Education, 1 (43). pp. 922-940. ISSN 1392-5369

Seong, Pick Choong (2003) Refurbishment project management system for commercial highrise buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sera, Mardani Ali (2000) Effect of impeller geometry of a water cooling pump on engine cooling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Setiani, Yulia (2008) Construction site security management and control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Setyowiyoto, Jarot and Samsuri, Ariffin (2009) Characterization, pressure and temperature influence on the compressional and shear wave velocity in carbonate rock. International Journal of Engineering & Technology IJET, 9 (10). pp. 80-93. ISSN 95510-9393

Shabak, Maryam and Norouzi, Nima and Megat Abdullah, Aminatuzuhariah and Khan, Tareef Hayat (2014) An analytical review of visual research method in environmental perception studies. Life Science Journal, 11 (10). pp. 474-488. ISSN 1097-8135

Shabak, Maryam and Norouzi, Nima and Megat Abdullah, Aminatuzuhariah and Khan, Tareef Hayat (2014) Evaluating common spaces in residential communities: an examination of the relationship between perceived environmental quality of place and residents' satisfaction. Life Science Journal, 11 (11). pp. 127-131. ISSN 1097-8135

Shaffee, Nursuriani (2013) Complexity of the floral pattern in ventilation panel of timber building in Kelantan and Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shafii, Faridah and Omar, Wahid and Mohammad, Shahrin and Makhtar, Ahmad Mahir (2001) Standardisation Of Structural Design: A Shift From British Standards To Eurocodes. Jurnal Teknologi B (34B). pp. 21-30. ISSN 0127-9696

Shafii, Faridah and Arman Ali, Zainab and Othman, Mohamed Zahry (2006) Achieving sustainable construction in the developing countries Of Southeast Asia. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Shahabudin, Norliza (2012) Amalan housekeeping di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahrim, M. F. and Che Ros, Faizah (2020) Dam break analysis of Temenggor Dam using HEC-RAS. In: th AUN/SEED-Net Regional Conference On Natural Disaster 2019, RCND 2019, 25 November 2019 - 26 November 2019, Zenith Hotel. Putrajaya, Malaysia.

Shahsavari, Fatemeh and Lim, Yaik Wah and Eftekhari, Ali (2015) Integration of building information modelling (BIM) with green facade retrofit design in Malaysia. In: SENVAR-INTA-AVAN 2015, 24-26 Nov, 2015, Johor Bahru, Malaysia.

Shaikh Salim, Sheikh Ahmad Zaki and Hagishima, Aya and Tanimoto, Jun and Ikegaya, Naoki (2011) Aerodynamic parameters of urban building arrays with random geometries. Boundary-Layer Meteorology, 138 . pp. 99-120. ISSN 0006-8314

Shamsuddin, Shuhana and Sulaiman, Ahmad Bashri and Lamit, Hasanuddin and Omar, Rozeyta and Abd. Aziz, Norsiah and Md. Noor, Masliyana (2007) Kompendium perancangan dan reka bentuk kampus kondusif. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0446–3

Shanmugam, Arvindran (2004) Monitoring and control methods for construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shari, Mohamad Azrul (2006) Pengurusan penyenggaraan bangunan lama kajian kes : Bangunan Sultan Ibrahim, Bukit Timbalan, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Shehab, A. M. and Kandar, M. Z. (2017) Environmental challenges to sustainable development in housing sector at Gaza strip. Advanced Science Letters, 23 (9). pp. 8851-8856. ISSN 1936-6612

Shehab, Abdalrahim M. A. (2018) Influences of socio-cultural values to community housing design in the Gaza Strip Palestine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sheikh Ahmad Zaki, Sheikh Ahmad Zaki and Shuhaimi, Saidatul Sharin and Mohammad, Ahmad Faiz and Mat Ali, Mohamed Sukri and Jamaludin, Khairur Rijal and Ahmad, Mardiana Idayu (2022) Development of a prediction model of the pedestrian mean velocity based on LES of random building arrays. Buildings, 12 (9). pp. 1-14. ISSN 2075-5309

Shika, Suleiman Aliyu and Sapri, Maimunah and Jibril, D. J. and Abdullah, Shahabudin and Wakawa, Usman Bukar and Umar, Aminu and Umar, Usman Aminu (2013) Post occupancy evaluation sustainability assessment framework for commercial office buildings. In: International Congress on Interdisciplinary Behavior and Social Science, 2013.

Shika, Suleiman Aliyu and Sapri, Maimunah and Sipan, Ibrahim and Abubakar, Alkali Ibrahim and Umar, Aminu and Wakawa, Usman Bukar (2013) Approach to calibrated simulation tool for improved building performance. Advanced Materials Research, 689 . pp. 22-25. ISSN 1662-8985

Shokri, Nurhazimah Husna and Mat Amin, Zulkarnaini and Ak Seli, Vanessa (2020) Non-destruction method for detecting corroded underground pipe using ground penetrating radar. In: 10th IGRSM International Conference and Exhibition on Geospatial and Remote, IGRSM 2020, 20 October 2020 - 21 October 2020, Kuala Lumpur, Virtual, Malaysia.

Shoubi, Mojtaba Valinejad (2013) Building performance assessment in terms of energy consumption using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shuaibu, Abdul-Wahab and Majid, Mohammad Rafee and Aliyu, Hussaini Bapetel (2015) Insights into small scale commercial water services in Nigerian urban area. Jurnal Tekonologi, 77 (14). pp. 77-84. ISSN 2180-3722

Siew, Sik Nguong (2013) An evaluation of effectiveness of approximate quantity method in estimating construction cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Silviawati, Sri (2005) Kajian simulasi berbantukan komputer bagi menilai kesilauan cahaya siang melalui tingkap di dalam sebuah ruang pejabat di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sing, Annan Vessinuk (2013) Element of warranty of IBS structural system for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siow, Soon Choy (2010) Effectiveness of retention of little clause in Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sk. Abd. Razak, Sk. Muiz (2010) Blast resistance of tall buildings structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soewendo, Adi Argo (2011) Comparison between construction contract used for governmnet projects in Indonesia and Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Soh , Tun Sian (2004) Aspek keselamatan dan kesihatan di tapak bina : antara amalan dan peruntukan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sonda Parningotan, Sonda Parningotan (2012) A study of claims management for irrigation construction contract : case : Amandit Irrigation Sub-Project, South Kalimantan, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sondossi, Soroush (2013) Dynamic response prediction of steel frame structure considering semi rigid connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soon, Tan Kian (2010) Dispute resolution in relation to delay of construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sotoudeh, Hesamaddin (2014) Aesthetic fitness of new architectural design in urban historical context in the city of Shiraz. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Speri, Sharlini (2016) Manifestasi kek lapis Sarawak dalam proses pemerkasaan psikologi pengusaha wanita di Kampung Gersik, Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sudirman, Ahmad Farihan (2008) The influence of daylight on number of patronage to shopping complex. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sulaiman, Khairunnizam (2010) Strategies for managing delay in Mara's building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulong, Akmal Wani (2009) Cost of compliance with safety and health requirements in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suraji, Norlia Sofa (2013) Client perspective towards application of industrialised building system in private construction projetcs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suratman, Robiah and Mohd. Raid, Maryanti and Nadzri, Muhammad Izuan and Samsudin, Salfarina and Mohammad, Nur Khairiyah (2020) The implementation of standard approach for open space planning in Kuala Lumpur. Planning Malaysia, 18 (4). pp. 452-464. ISSN 16756215

Suwarlan, Stivani Ayuning and Lai, Lee Yoke and Said, Ismail (2023) Social norms framework of Suku Laut in traditional coastal settlement of mainland Batam. International Journal of Sustainable Development and Planning, 18 (3). pp. 703-713. ISSN 1743-7601

Suziana, M. Y. and Ibrahim, N. and Siti Rahyla, R. and Razlini, M. R. (2017) The local people perceptions on the economic impacts of Indonesian workers in rural areas: a case study at rural Johor. Pertanika Journal of Social Sciences and Humanities, 25 (1). pp. 485-502. ISSN 0128-7702

Syamsuri, Efni Uslinda (2004) Pemilihan sub-kontraktor menggunakan kaedah logik fuzzi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syed Darar, Sharifah Eisyahtun and Ismail, Hairul Nizam (2015) Tripographic assessment of VFR travel in context of Malaysian domestic travelers. In: 13th International Congress of Asian Planning Schools Association 2015: Towards and Asian Urban Agenda, 12-14 August, 2015, Johor Bahru, Malaysia.

Syed Mahdzar, S. S. and Jaberolansar, S. and Jamil, A. H. (2019) The effect of spatial configuration on sense of safety through street legibility. In: 12th International Space Syntax Symposium, SSS 2019, 8-13 July 2019, Beijing Jiaotong UniversityBeijing; China.

Syed Mahdzar, Sharifah Salwa and Wong, Zhi Zhong (2017) Flexible and adaptable public housing for youth in Malaysia. Project Report. Northumbria University Press.

T

Tafahomi, Rahman (2012) Deficiencies of urban design considerations in the urban development plan of Mashhad City. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Taherkhani, Roohollah (2013) Development of a social sustainability model in industrial building system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tahir, Zurinah and Hussin, Khadijah (2012) Security aspects of gated community housing and the concept of save townships. Chinese Business Review (2). pp. 242-250. ISSN 1537-1506

Taib, Tahrina (2010) Efficiency in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tajul Ariffin, Hamizah Liyana (2007) Letter of intent and standard form of builiding contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tajul Ariffin, Hamizah Liyana and Aziz, Zeeshan and Mohd. Raslim, Faraziera and Jaafar, Mastura (2016) Identify disputes in the construction industry: the way forward for innovative procurement system in Malaysia. Research Journal of Fisheries and Hydrobiology, 11 (3). pp. 98-104. ISSN 1816-9112

Tajul Ariffin, Hamizah Liyana and Mohd., Norhazren Izatie and Mustaffa, Nur Emma and Bandi, Shamsulhadi and Cecelia, Ho Mei Chee (2019) Perspectives on issues and the application of the innovative procurement approaches for the Industrialised Building System (IBS). International Journal of Built Environment and Sustainability, 6 (1). pp. 39-43. ISSN 2289-8948

Taki, Eddine Seghier and Ahmad, Mohd. Hamdan and Lim, Yaik-Wah (2019) Automation of Concrete Usage Index (CUI) assessment using computational BIM. International Journal of Built Environment and Sustainability, 6 (1). pp. 23-30. ISSN 2289-8948

Talib, Rozilah (2011) Dispute review boards in the context of Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tan, Chee Wei (2002) Behaviour of high-rise buildings under seismic effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Pei Ling (2007) Employer's rights and contractor's liabilities in relation to construction defects after final certificate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tan, San San (2006) Corporate social responsibility of developers in product perspective. case study: Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Tan, Swee Kok (2010) Cost effectiveness comparison of pre-fabrication with conventional construction method for RMAF ground defense bunker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tang, Wai Keong (2002) Pengurusan kemudahan dan penyenggaraan bagi bangunan tinggi komersial di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tari, Laleh Khalili (2012) Film induced tourism: a study on the potential of film induced tourism to motivate travelers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tarmidi, Mohammad Zakri and Rizal, Nurfarhani (2022) Sustainability assessment of affordable housing in Kuala Lumpur and Selangor. Journal Of Tourism, Hospitality And Environment Management (JTHEM), 7 (27). pp. 342-352. ISSN 0128-178X

Tasnim, Sutapa (2019) User behaviour experiences of Dhaka’s public open space and design features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Taufik, Mohamad (2012) A study on identifying factors affecting project performance on road construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tay, Allan Eng Mian (2006) Industrialised building system formation scheduling for public buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tay , Miaw Sze (2004) Penggunaan portal K-constructions dalam penghantaran dokumen secara berelektronik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tayo, Abubakar-Kamar Aisha and Rashidi, Mohd. Hisyam and Said, Ismail (2020) Assessment of behaviour and attachment of children to public space usage in Nigeria. International Journal of Scientific and Technology Research, 9 (3). pp. 6008-6015. ISSN 2277-8616

Tazol Arrief, Nurulain (2013) Employer's implied obligation in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Teck Shin, Lee (2014) Outrigger system for interconnecting three dimensional multi-stories buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Beng Hock (2000) Reviewing the project delivery systems used in Malaysia Construction Industry : focus on the conventional method and the design and build method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Eng Tiong (2002) Kajian terhadap amalan penentuan produktiviti kerja dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Yeong Yih (2013) Pure economic loss in Malaysia's construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Teh, Bor Tsong and Ho, Chin Siong and Matsuoka, Yuzuru and Chau, Loon Wai and Gomi, K. (2014) Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Tengku Asmara, T. A. and Muhamad Ludin, Ahmad Nazri (2014) Mapping perception of community preparedness towards flood in Muar River, Johor Malaysia. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Tey, Kim Hai and Lim, Shin Yee and Md. Yusof, Aminah and Chai, Chang Sa'Ar (2015) The implementation of construction cost index (CCI) in Malaysia. In: 9Th Asia Pacific Structural Engineering and Construction Conference (APSEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Tham, Lian Yu (2003) ISO 9000 : 2000 quality standard - implementation and effectiveness in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thangathulai, Christie (2019) Profiling of summary judgement in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Then, Frederick (2013) Energy efficiency technology in office and commercial buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Then, Lee Lian (2010) Equitable remedy : specific performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Then, Lee Lian (2010) Equitable remedy: specific performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Thong, Jia Wen (2019) Life cycle assessment of energy and CO2 emissions from cast in-situ and industrialised building systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Thong, Jia Wen (2008) Reengineering of ISO 9001:2000 document management system compliance with construction inspection process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thoo, Hoi Hian (2002) Life cycle assessment of steel construcrtion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tiew, Syen Youngs (2012) Petition for winding up under section 218 of Companies Act 1965. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tifwa, Hassan Yerima and Majid, Mohammad Rafee and Alaci, D. S. A. and Taiwo, Ogungbenro Mathew (2014) Estimating the values of wetlands in riparian communities: a tool for decision-making in planning. In: The International Conference on Urban and Regional Planning 2014 (ICURP2014), 9-11 May, 2014, Skudai, Johor.

Ting, Hie Ching (2012) Conflict of laws in arbitration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ting, Hie King and Abdullah, Mat Naim and Ayop, Mohd. Hanaffi and Sudin, Mohd. Noor (2008) ISO 9000 critical quality elements for a construction project team. In: Quality Management System in Malaysian Construction Industry. Penerbit UTM , Johor, pp. 25-35. ISBN 978-983-52-0588-0

Titus, Olalekan Olaolu (2009) Notice of loss and/or expense claim in PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Titus, Olalekan Olaolu and Tajul Ariffin, Hamizah Liyana and Ali, Kherun Nita (2023) Construction dispute and contract incompleteness in Nigeria construction industry. Ain Shams Engineering Journal, 14 (10). pp. 1-15. ISSN 2090-4479

Toe, Doris Hooi Chyee (2009) Night ventilation technique for terraced houses in hot humid climate of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Toh, Ka Bean and Mustapa, Fara Diva and Mustapa, Muzani (2022) Transaction cost analysis in building information modelling adoption procurement: an initial study. International Journal of Public Sector Performance Management, 10 (2-3). pp. 258-270. ISSN 1741-1041

Torghabeh, Zahra Jabbarani (2012) Ergonomics in building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Towolioe, Sherly (2018) Perception of the community on the local government failure factors on sustainable solid waste management in a developing country. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tuah, Mohd. Zaidi (2011) Use of discretion by contract principle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

U

Umar, Aminu and Embi, Mohamed Rashid and Muhamad Yatim, Yahya and Alkali, Ibrahim A. (2015) Experts influence on fire safety criteria ranking for factory buildings in Nigeria. Jurnal Teknologi, 77 (14). pp. 95-98. ISSN 2180-3722

Umaru, E. T. and Muhamad Ludin, Ahmad Nazri and Sabri, Soheil (2014) Spatiotemporal analysis of the spread of meningococcal meningitis in Kaduna Metropolis, 2007-2011. IOP Conference Series: Earth and Environmental Science, 18 (1). ISSN 1755-1315

Ungku Mohamed Tahir, Ungku Haslina (1997) Performance analysis of LiBr - H2O double effect gas fired absorption chiller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

V

Vijayan, Vickram Thevar and Embi, Mohamed Rashid (2019) Probing phenomenological experiences through electroencephalography brainwave signals in neuroarchitecture study. International Journal of Built Environment and Sustainability, 6 (3). pp. 11-20. ISSN 2289-8948

W

W. Mohd. Shaupil, W. Mohd. Haniff (2008) Remoteness of damage in breach of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wahi, Noraziah (2008) Minimising construction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wahid, Norlizan (2007) Frame analysis of reinforced concrete shear walls with openings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wakawa, Usman Bukar (2015) Restorativeness of play milieu affordance in a paediatric ward in Nigerian hospital. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Abdul Basir, Wan Nor Fa’aizah and Ujang, Uznir and Majid, Zulkepli and Azri, Suhaibah (2021) Data interoperability of building information modeling and geographic information system in construction industry. In: 16th 3D GeoInfo Conference 2021, 11 October 2021 - 14 October 2021, New York City, USA.

Wan Ahmad, Wan Azlan (1996) An analysis of the commonwealth courts decisions on liabilities of construction professionals with special reference to post-completion claims. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Hamdan, Wan Samsul Zamani (2004) Design & build as project delivery system : the potential application in Bank Pembangunan & Infrastruktur Malaysia Berhad (BPIMB) factory complex's development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Ibrahim, Wan Mohd. Izzuddin (2011) Service of notice for determination in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Ibrahim, Wan Yusryzal and Muhamad Ludin, Ahmad Nazri (2014) Spatiotemporal land use change analysis using open source GIS and web based application. In: International Conference on Urban and Regional Planning 2014: Planning in an Uncertain World, 9-11 May, 2014, Skudai, Johor.

Wan Kassim, Sharifah Athirah Izyan and Majid, Mohammad Rafee (2014) Of land use mix, location and travel carbon emission: state of the relationship in neighbourhoods of Iskandar Malaysia. In: The International Conference on Urban and Regional Planning 2014 (ICURP2014), 9-11 May, 2014, Skudai, Johor.

Wan Mohamed Rashdi, Wan Shahrizatul Suraya (2016) The effect of building form on cooling load in hot and humid climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wang, Tze Wee (2017) Carbon and energy use reporting for government office buildings in Putrajaya. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Weng, Yong Kum and Ahmad, Abdullah Sani (2015) The liability of certifier under the relevant laws, housing sale and purchase agreement and building contract. In: 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015, 7 May 2015 - 8 May 2015, Amsterdam, Netherlands.

Wi, K. and Lee, H. S. and Lim, S. and Ismail, M. A. and Hussin, M. W. (2018) Effect of using micropalm oil fuel ash as partial replacement of cement on the properties of cement mortar. Advances in Materials Science and Engineering, 2018 (516403). ISSN 1687-8434

Wibowo Soeharto, Mochamad Anugrah (2012) A study of contractor's procurement performance case: PT. Waskita Karya (Persero), Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wong, Bi Xia (2009) Measure of damages for defective building work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wong, Charng Chen (2006) Prediction of ultimate load bearing capacity of driven piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Chin Liang (2010) The efficiency and effectiveness of building maintenance for College Tun Hussein Onn (KTHO), Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Foo Yeu (2017) Law of restitution in Malaysian construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wong, Keng Lian (2000) Construction risk management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Kenvy Chee Vui (2022) Can the contract be renegotiated due to covid-19 pandemic? Masters thesis, Universiti Teknologi Malaysia.

Wongso, Jonny (2015) Strategi pemeliharaan bandar pusaka berdasarkan kebijaksanaan tempatan Minangkabau. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Woon, Kai Siong (2006) Integrating construactability into the design process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Woyowarsito, Dodi Ardianto (2011) Analysis of factors affecting the accuracy of early cost estimate in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

X

Xiong, Lanping (2019) Post contract risk analysis for chinese contractors in malaysia under one belt one road initiative. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Y

Yaakup, Ahris and Muhammad Ludin, Ahmad Nazri (2008) Criteria for urban sprawl / land use expansion. Project Report. Faculty of Built Environment, Skudai, Johor. (Unpublished)

Yadollahi, Mohammad Reza and Ansari, Reza and Abd. Majid, Muhd. Zaimi and Chong, Heap Yih (2015) A multi-criteria analysis for bridge sustainability assessment: a case study of Penang Second Bridge, Malaysia. Structure and Infrastructure Engineering, 11 (5). pp. 638-654. ISSN 1573-2479

Yadollahi, Mohammadreza (2013) Budget allocation management model for seismic rehabilitation of infrastructure assets. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yahya, A. S and Ahmad, M. H. and Golam Hassan @ Mohammad, Asan Ali (2022) Discovering pattern of space layouts from low-income housing: a discussion of the new normal preparedness after the Covid-19 pandemic. In: International Conference on Architectural Research and Design, ARDC 2021 and the 21st Sustainable Environment and Architecture, SENVAR 2021, 2 November 2021 - 3 November 2021, Virtual, Online.

Yahya, A. S. and Hassan, A. A. G. and Ahmad, M. H. and Chung, L. P. (2021) Social definition of spatial design from policymaker for low income group’s housing in Malaysia. Akademika, 91 (2). pp. 117-128. ISSN 0126-5008 (Unpublished)

Yahya, Ahmad Shuib and Hassan, Asan Ali Golam and Ahmad, Mohd. Hamdan and Leng, Pau Chung (2021) Pentakrifan sosial daripada pembuat dasar dalam rekabentuk ruangan untuk perumahan golongan berpendapatan rendah di Malaysia. Akademika, 91 (2). pp. 117-128. ISSN 0126-5008

Yahya, Khairulzan (2002) Penilaian terhadap keupayaan model rangkaian neural bagi meramal permintaan rumah kos rendah kawasan bandar di Negeri Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yan, Yen Qun (2015) Aquaponic system for self-sustain living. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yao, Zhang and Ismail, Alice Sabrina (2023) The ideology of confucianism Zhu Xi: an application in the design of Huizhou residential buildings in China. Migration Letters, 20 (S3). pp. 159-173. ISSN 1741-8984

Yap, Jeffrey Boon Hui (2003) The study of the effectiveness of design and build (D&B) procurement method in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap, Poy Yee (2010) Judicial interpretations on "error of law on the face of arbitration award". Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yatiman, Noor Ain (2014) Affordances of home-school journey as a play and learning environment for rural middle childhood children. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yazdi, Mohammad Farid Alvansaz and Zakaria, Rozana and Mustaffar, Mushairry and Abd. Majid, Muhd. Zaimi and Mohamad Zin, Rosli and Ismail, Mohammad and Yahya, Khairulzan (2014) Bio-composite materials potential in enhancing sustainable construction. Desalination and Water Treatment, 52 (19-21). pp. 3631-3636. ISSN 1944-3986

Yazid, Nurul Amirah (2016) Domestic visitor travel perception in determining destination image of Kota Tinggi District, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yeap, Ming Keong (2003) A study on implementing total quality management (TQM) in the construction industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yi, Chong Jia and Zaki, Sheikh Ahmad and Tuck, Ng Wai and Rijal, Homs Bahadur (2023) Simulation of roof retrofitting strategies to mitigate attic overheating issues of the terrace house under hot and humid climate. In: 11th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, IAQVE C2023, 20 May 2023 - 23 May 2023, Tokyo, Japan.

Yong, Kum Weng (2012) Strategies for preventing the premature and fault certification of housing development project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yong, Yee Cheong and Mustaffa, Nur Emma (2017) Critical success factors for Malaysian construction projects: an investigative review. International Journal of Built Environment and Sustainability, 4 (2). ISSN 2289-8948

Yousif, Yousif and Misnan, Mohd. Saidin and Ismail, Mohamad Zahierruden (2023) The influence of labelled green building materials on the performance of green construction projects. In: International Graduate Conference of Built Environment and Surveying 2023, GBES 2023, 17 September 2023 - 18 September 2023, Hybrid, Johor Bahru, Johor, Malaysia.

Yow, Kah Lun (2006) Voidable and void construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yuhaniz, Mayamin and Mohd. Jusan, Mahmud (2016) The role and activities of Malay housewives and their influence on housing design preferences. In: Procedia Social and Behavioral Sciences, 25-27 Apr, 2015, Jakarta, Indonesia.

Yunus, Rozetta (2005) Tindakan pengambil alihan projek perumahan terbengkalai kajian kes di negeri Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yunus, Siti Radiah (2007) Earthquake analysis of IBS for single storey housing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Norhakim and Idris, Nurul Hazrina and Darwin, Norhadija and Kanniah, Kasturi Devi and Kumar, Nimit and Levy, Gad (2022) Interactive distance learning for virtual capacity building development intra-pandemic experiences: A case of Mooc UTM-PORSEC. In: 2022 IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2022, 17 - 22 July 2022, Kuala Lumpur, Malaysia.

Yusoff, Zaharah (2009) Employer's recovery of payment caused variations due to designers negligence. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yusuf, Badiru Yunusa and Ali, Kherun Nita and Embi, Muhammad Rashid (2015) Building information modeling (BIM): a potential for effective building industry practice in Malaysia. Jurnal Teknologi, 77 (15). pp. 55-61. ISSN 0127-9696

Yusuf, G. A. and Mohamed, S. F. and Yusof, Z. M. and Misnan, M. S. (2013) Adoption of standard based pricing method for the procurement of mechanical and electrical engineering services in Malaysia. In: Lecture Notes In Engineering And Computer Science.

Yusuf, G. A. and Mohamed, S. F. and Yusof, Z. M. and Misnan, M. S. (2013) Role of building services quantity surveyors in managing cost of green buildings. In: Advanced Materials Research.

Yusuf, Ganiyu Amuda and Mohamed, Sarajul Fikri and Remeli, Suhaila (2013) Factors inhibiting the adoption of a uniform pricing mechanism for building services. International Journal of Engineering Business Management, 5 . pp. 1-10. ISSN 18479790 (Submitted)

Yusuf, Sitiayu Zubaidah and Hussin, Khadijah and Azali, Nur Husna (2015) Child safety policy in high-rise building as preventive measures of child falls – a review. Jurnal Teknologi, 73 (5). pp. 79-84. ISSN 0127-9696

Z

Zahari, M. A. Z. and Majid, M. R. and Ho, C. S. and Kurata, G. and Nadhirah, N. and Irina, S. Z. (2016) Relationship between land use composition and PM10 concentrations in Iskandar Malaysia. Clean Technologies and Environmental Policy, 18 (8). pp. 2429-2439. ISSN 1618-954X

Zainal Abidin, Mohd. Kamarul Izwan (2008) The causes and impact of poor construction documentation in construction organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal Abidin@Md. Taib, Ahmad Razin (2007) Simulation of industrialised building system formation for housing construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainudin, Zulhilmi (2017) Recovery of damages beyond the limit of unenforceable liquidated damages clause. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zainul Amri, Haidar Akma (2010) Failures of roof structures caused by wind uplift forces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Intan Bayani (2010) Arbitrator’s jurisdiction to resolve disputes relating to allegation of fraud. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zakaria, Mohd. Azuan and Kubota, Tetsu and Toe, Doris Hooi Chyee (2015) The effects of courtyards on indoor thermal conditions of chinese shophouse in Malacca. In: The 9th International Symposium on Heating, Ventilation and Air Conditioning and the 3rd International Conference on Building Energy and Environment (ISHBAC-COBEE 2015), 12-15 June, 2015, China.

Zakaria, Rozana (2001) Masalah komunikasi dalam pengurusan projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Wan Zahran (2013) Executive information system for monitoring building construction work progress. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakiyudin, Mohd. Zulakhmar and Fathi, Mohamad Syazli and Rambat, Shuib and Mohd. Tobi, Siti Uzairiah and Rajab, Nor Aini (2015) A pilot study of user-requirements for building maintenance systems in Malaysian higher education institutions. In: Applied Mechanics And Materials, 2015.

Zakiyudin, Mohd. Zulakhmar and Fathi, Mohamad Syazli and Rambat, Shuib and Tobi, Siti Uzairiah and Rajab, Nor A’ini (2015) The user requirements for building maintenance management systems in Malaysian public universities. In: The Second International Conference on Construction and Building Engineering (ICONBUILD2015), 11-13 August, 2015, Indonesia.

Zakiyudin, Mohd. Zulalchmar and Fathi, Mohamad Syazli and Rambat, Shuib and Tobi, Siti Uzairiah and Rejab, Noraini (2015) Building maintenance management in Malaysia: an overview. In: 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015, 7 May 2015 - 8 May 2015, Amsterdam.

Zakka, S. D. and Permana, A. S. and Majid, M. R. (2017) Urban spatial pattern and carbon emission interconnectivity in a sub-Saharan City, Nigeria. Planning Malaysia, 15 (3). pp. 51-62. ISSN 1675-6215

Zamri, Mohd. Amirul Hakim and Rasidi, Mohd. Hisyam and Abdul Majid, Roshida (2023) The contextual design criteria of infill building façade in Malaysian urban historic districts: a systematic review. International Journal of Sustainable Development and Planning, 18 (5). pp. 1467-1475. ISSN 1743-7601

Zango, Modi Sule (2020) Fully enclosed vegetated courtyard in hot humid tropics. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Zanudin, Khalid and Wikantiyoso, Respati and Bidin, Zafikha Aida and Rashid, Mohamad Fadhli (2023) Strategic collaborative planning for urban liveability: a comparative review of metropolitan area case studies. International Journal of Sustainable Construction Engineering and Technology, 14 (5). pp. 37-48. ISSN 2180-3242

Zen, Irina Safitri and Ahamad, Rahmalan and Omar, Wahid (2014) The development and measurement of conducive campus environment for Universiti Teknologi Malaysia (UTM) of campus sustainability. Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 71-82. ISSN 2180-3722

Zen, Irina Safitri and Noor, Zainura Zainon and Yusuf, Rafiu Olasunkanmi (2014) The profiles of household solid waste recyclers and non-recyclers in Kuala Lumpur, Malaysia. Habitat International, 42 . pp. 83-89. ISSN 0197-3975

Zulherman, Zulherma (2012) Keberkesanan polisi kelulusan membina bangunan di Kota Padang, Sumatera Barat Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkepli, Masitah (2020) A market driven framework for green affordable housing criteria in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment & Surveying.

Zulkepli, Mohd. Afiq (2012) Negligence by quantity surveyors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkernain, Mohamad Safwan Saifuddin (2016) The visual pattern of pedestrian connectivity to the informal eating places in Jalan Ampang, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zulkifli, Siti Salwa Ashikin (2016) Frustration of contract due to abnormal increase of price in Malaysia legal perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

This list was generated on Thu Oct 10 21:30:23 2024 +08.