Browse by Type

Amir, N. A. and Hamzah, S. A. and Ramli, K. N. and Esa, M. (2016) 2×1 microstrip patch array antenna with harmonic suppression capability. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Mikami, O. and Fujikawa, C. (2016) 3-Beam laser Doppler velocimeter for 3-D velocity measurement. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Kuching, Sarawak; Malaysia.

Jizat, N. M. and Isa, N. M. and Sheela Francisca, J. and Rahim, S. K. A. (2016) 3-dB Branch-line coupler using coupled line radial stub with no restriction on coupling power. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Kuching, Sarawak; Malaysia.

Ismail, I. and Sunar, M. S. and Qian, H. W. and Arsad, M. A. M. (2016) 3D character motion deformation technique for motion style alteration. In: 4th International Conference on Interactive Digital Media, ICIDM 2015, 1 December 2015 through 5 December 2015, Bandung; Indonesia.

Suhaibah, A. and Uznir, U. and Rahman, A. A. and Anton, F. and Mioc, D. (2016) 3D geomarketing segmentation: a higher spatial dimension planning perspective. In: International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Sarkawi, S. and Zakaria, Z. and Balkhis, I. and Jalil, J. A. and Rahim, M. A. A. and Rahiman, M. H. F. and Mustafa, N. and Rahim, R. A. and Shaffie, Z. (2016) 3D model simulation on magnetic induction spectroscopy for fetal acidosis detection using COMSOL multiphysics. In: 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015, 21 December 2015 through 22 December 2015, Penang; Malaysia.

Suhaibah, A. and Uznir, U. and Anton, F. and Mioc, D. and Rahman, A. A. (2016) 3D nearest neighbour search using a clustered hierarchical tree structure. In: 23rd International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences Congress, ISPRS 2016, 12-19 July 2016, Prague, Czech Republic.

Siew, C. B. and Abdul Rahman, A. (2016) 3D streaming protocols for spatial data infrastructure: a brief review. In: International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Jamali, A. and Rahman, A. A. and Boguslawski, P. (2016) 3D topological indoor building modeling integrated with open street map. In: International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Azmi, N. F. M. and Sarkan, H. M. and Yahya, Y. and Chuprat, S. (2016) ABCD rules segmentation on Malignant tumor and Benign skin lesion images. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur; Malaysia.

Hashim, M. and Misbari, S. and Yahya, N. N. and Hossain, M. S. (2016) Above ground blue carbon sequestration capacity of Sungai Pulai estuary seagrass meadows - a satellite based method. In: 37th Asian Conference on Remote Sensing, ACRS 2016, 17-21 Oct 2016, Colombo, Sri Lanka.

Sahar, M. R. and Sazali, E. S. and Yusoff, N. M. (2016) Absorption features and luminescence enhancement of tellurite glass embedded with metallic nanoparticles. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Hamida, A. I. A. and Dina, A. H. M. and Khalid, N. F. and Omar, K. M. (2016) Acceleration of sea level rise over Malaysian seas from satellite altimeter. In: International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Goh, K. C. and Goh, H. H. and Omar, M. F. and Toh, T. C. and Mohd. Zin, A. A. (2016) Accidents preventive practice for high-rise construction. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Hamid, S. and Ali, M. T. and Abd Rahman, N. H. and Pasya, I. and Yamada, Y. and Michishita, N. (2016) Accuracy estimations of a negative refractive index cylindrical lens antenna designing. In: 6th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, IEEE APWC 2016, 19 September 2016 through 23 September 2016, Australia.

Fauzi, N. F. and Ali, M. T. and Abd Rahman, N. H. and Yamada, Y. (2016) Accurate feed position designing for Malaysia beam coverage. In: 6th IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications, IEEE APWC 2016, 19 September 2016 through 23 September 2016, Australia.

Abdullahi, A. M. and Mohamed, Z. and Abidin, M. S. Z. and Akmeliawati, R. and Husain, A. R. and Bature, A. A. and Alhassan, A. (2016) Adaptive input shaping for sway control of 3D crane using a pole-zero cancellation method. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Yew, H. T. and Supriyanto, E. and Satria, M. H. and Hau, Y. W. (2016) Adaptive network selection mechanism for telecardiology system in developing countries. In: 3rd IEEE EMBS International Conference on Biomedical and Health Informatics, BHI 2016, 24 February 2016 through 27 February 2016, Las Vegas; United States.

Ghazali, N. S. and Baharun, S. and Islam, A. K. M. M. and Wada, K. (2016) Adaptive tree-based routing for multi-channel wireless sensor network. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Dhaka; Bangladesh.

Okafor, H. E. and Sukirman, Y. and Gholami, R. (2016) Adsorption and wettability study of methyl ester sulphonate on precipitated asphaltene. In: 10th Curtin University Technology Science and Engineering International Conference, CUTSE 2015, 6 -8 Nov 2015, Sarawak, Malaysia.

Sanmugam, M. and Abdullah, Z. and Mohamed, H. and Aris, B. and Zaid, N. M. and Suhadi, S. M. (2016) The affiliation between student achievement and elements of gamification in learning science. In: 4th International Conference on Information and Communication Technology, ICoICT 2016, 25 May 2016 through 27 May 2016, Bandung; Indonesia.

Galankashi, M. R. and Hisjam, M. and Helmi, S. A. (2016) Agile supplier selection: a fuzzy analytic hierarchy process (FAHP) approach. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Klemm, M. and Nagel, E. and Dietzel, A. and Lai, L. K. W. and Supriyanto, E. and Schweitzer, D. (2016) Agreement between eyes in wide-field fluorescence lifetime imaging ophthalmoscopy measurements at the human retina in healthy volunteers. In: International Conference for Innovation in Biomedical Engineering and Life Sciences, ICIBEL 2015, 6-8 Dec 2015, Putrajaya, Malaysia.

Izuddin Md. Ithnan, M. and Nusyirwan, I. F. and Mohd. Rohani, J. (2016) Aircraft ground movement delay: a descriptive statistical analysis at Kuala Lumpur International Airport. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Nusyirwan, I. F. and Kung, Z. Y. (2016) Aircraft nonlinear optimal control using fuzzy gain scheduling. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Aspar, Z. and Shaikh-Husin, N. and Khalil-Hani, M. (2016) Algorithm to convert programmable logic controller Ladder Logic Diagram models to Petri Net models. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 December 2015 through 14 December 2015, Kuala Lumpur; Malaysia.

Aspar, Z. and Shaikh-Husin, N. and Khalil-Hani, M. (2016) Algorithm to convert programmable logic controller Ladder Logic Diagram models to Petri Net models. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Awal, M. R. and Jusoh, M. and Sabapathy, T. and Kamarudin, M. R. and Rahim, H. A. and Abd Malek, M. F. (2016) Analysis of a hybrid wireless power harvester for low power applications. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Davos; Switzerland.

Jian, T. C. and Amin, N. (2016) Analysis of blood flow through a catheterized stenosed artery using Mathematica. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Rohani, J. M. and Mohd. Zainal, A. and Johari, M. F. and Sirat, R. M. and Zein, R. M. and Rahman, I. A. (2016) Analysis of compensation cost related to musculoskeletal disorders (MSDs) against younger and older Malaysian manufacturing workers. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Gan, H. S. and Karim, A. H. A. and Sayuti, K. A. and Tan, T. S. and Kadir, M. R. A. (2016) Analysis of parameters' effects in semi-automated knee cartilage segmentation model: Data from the osteoarthritis initiative. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Songkhla; Thailand.

Jong, S. L. and Lam, H. Y. and D'Amico, M. and Din, J. (2016) Analysis of precipitation characteristics over Southern peninsular Malaysia for satellite propagation application. In: 2016 URSI Asia-Pacific Radio Science Conference, URSI AP-RASC 2016, 10 August 2016 through 12 August 2016, Seoul; South Korea.

Al-Nuaimi, I. T. I. and Mahmood, A. K. B. and Mustapha, E. E. and Jebur, H. H. (2016) Analysis of significant dimensions of e-service quality in Malaysian universities. In: 2015 International Symposium on Mathematical Sciences and Computing Research, iSMSC 2015, 19 May 2015 through 20 May 2015, Hotel Casuarina Bandar Meru Raya Ipoh; Malaysia.

Dedy, A. N. and Zakuan, N. and Omain, S. Z. and Rahim, K. A. and Ariff, M. S. M. and Sulaiman, Z. and Saman, M. Z. M. (2016) An analysis of the impact of total quality management on employee performance with mediating role of process innovation. In: 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2016, 19 March 2016 through 20 March 2016, Bali; Indonesia.

Awang, N. A. and Maan, N. (2016) Analysis of tumor populations and immune system interaction model. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Malik, A. and Razak, A. A. and Nawi, M. R. M. and Saharuddin, R. and Zaki, S. A. (2016) Analysis of ventilation system on respiratory symptoms at child care centers. In: 8th Asian Conference on Refrigeration and Air-Conditioning, ACRA 2016, 15-17 May 2016, Taipei, Taiwan.

Hamid, A. H. A. and Rozan, M. Z. A. and Deris, S. and Ibrahim, R. and Abdullah, W. S. W. and Rahman, A. A. and Yunus, M. N. M. (2016) Analyzing and sense making of human factors in the Malaysian radiation and nuclear emergency planning framework. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Mahad, D. A. and Ismail, Z. (2016) Ant foraging behavior for job shop problem. In: 2016 International Conference on Design Engineering and Science, ICDES 2016, 27 February 2016 through 29 February 2016, Selangor Darul Ehsan, Malaysia.

Eshaghi, S. M. S. and Afshardoost, M. and Ahmadi, M. M. (2016) Antecedents of online purchase intention: a cross-national study between Iran and Malaysia. In: 10th International Conference on e-Commerce in Developing Countries: With Focus on e-Tourism, ECDC 2016, 15 April 2016 through 16 April 2016, Isfahan; Iran.

Ashyap, A. Y.I . and Marzudi, W. N. N. W. and Abidin, Z. Z. and Dahlan, S. H. and Majid, H. A. and Kamaruddin, M. R. (2016) Antenna incorporated with Electromagnetic Bandgap (EBG) for wearable application at 2.4 GHz wireless bands. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Dewan, R. and Rahim, M. K. A. (2016) Antenna performance enhancement with Artificial Magnetic Conductor(AMC). In: IEEE International Conference on Antenna Measurements and Applications, IEEE CAMA 2015, 30 Nov - 2 Dec 2015, Chiang Mai, Thailand.

Nik Malek, N. A. N. and Azalisa, W. N. and Yieh Lin, C. C. (2016) Antibacterial activity of cetyltrimethylammonium bromide modified silver-bentonite. In: 3rd International Conference on Chemical and Biological Sciences, ICCBS 2016, 23 March 2016 through 25 March 2016, Amsterdam; Netherlands.

Sanmugam, Mageswaran and Mohamed, Hasnah and Mohd. Zaid, Norasykin and Aris, Baharuddin and Abdullah, Zaleha (2016) The application of gamification and its effects on the intrinsic motivation of rural students in Sabah, Malaysia. In: Proceedings of The International Conference on Education and Higher Order Thinking Skills (ICE-HOTS 2016), 11-13 Apr, 2016, Johor Bahru, Malaysia.

Ramli, R. M. and Arief, Y. Z. and Aziz, P. D. A. (2016) Application of LED technology into public road lighting in Malaysia for replacing the high pressure sodium vapour lighting. In: 3rd International Conference on Sustainable Energy Engineering and Application, ICSEEA 2015, 5-7 Oct 2015, Bandung, Indonesia.

Pour, A. B. and Hashim, M. and Hong, J. K. (2016) Application of multispectral satellite data for geological mapping in antarctic environments. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Pour, A. B. and Hashim, M. (2016) Application of PALSAR-2 remote sensing data for landslide hazard mapping in Kelantan river basin, peninsular Malaysia. In: 23rd International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences Congress, ISPRS 2016, 12-19 July 2016, Prague, Czech Republic.

Pour, A. B. and Hashim, M. (2016) Application of PALSAR-2 remote sensing data for structural geology and topographic mapping in Kelantan river basin, Malaysia. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Pour, A. B. and Hashim, M. (2016) Application of satellite remote sensing data for geological mapping in Antarctic Peninsula. In: 37th Asian Conference on Remote Sensing, ACRS 2016, 17-21 Oct 2016, Colombo, Sri Lanka.

Pohl, F. and Aditya, Y. N. and Pohl, C. and Supriyanto, E. (2016) Application of standing waves as audible information in hypertension therapy. In: 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering, ICICI-BME 2015, 2-3 Nov 2015, Bandung, Indonesia.

Karim, H. and Rahman, A. A. (2016) Application perspective of 2D+scale dimension. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Chan, Meng Shen and Shariff, Sya Azmeela (2016) Apply UTAUT model for understanding the teacher perceptions using frog VLE. In: POSTGRADUATE ANNUAL RESEARCH ON INFORMATICS SEMINAR (PARIS 2016), 2016, Kuala Lumpur, Malaysia.

Jiann, L. Y. and Ismail, Z. and Shafie, S. and Fitt, A. (2016) Aqueous humour dynamics in anterior chamber with the Descemet's membrane detachment. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Songkhla; Thailand.

Goudarzi, S. and Hassan, W. H. and Soleymani, S. A. and Zakaria, O. and Jivanadham, L. B. (2016) Artificial bee colony for vertical-handover in heterogeneous wireless networks. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Birowo, Birowo and Ahmad, R. and Zamzuri, H. and Priyono, A. (2016) Artificial neural network based controller for line starting performance synchronous motor of a conveyor system using field oriented self-controlled. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2015, 24 November 2015 through 25 November 2015, Kuala Lumpur; Malaysia.

Shaban, M. and Salam, M. A. and Ang, S. P. and Sidik, M. A. B. and Buntat, Z. and Voon, W. (2016) Assessing induced sheath voltage in multi-circuit cables: revising the methodology. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Othman, A. H. and Omar, K. M. and Din, A. H. M. and Som, Z. A. M. and Yahaya, N. A. Z. and Pa'Suya, M. F. (2016) Assessment of Gravity Field and Steady State Ocean Circulation Explorer (GOCE) geoid model using GPS levelling over Sabah and Sarawak. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Amoo, A. L. and Aliyu, U. O. and Bakare, G. A. and Dalila, M. S. (2016) Assessment of harmonic penetration with embedded PV in Nigerian power system. In: Clemson University Power Systems Conference, PSC 2016, 8 March 2016 through 11 March 2016, United States.

Karim, M. K. A. and Hashim, S. and Bradley, D. A. and Bahruddin, N. A. and Ang, W. C. and Salehhon, N. (2016) Assessment of knowledge and awareness among radiology personnel regarding current computed tomography technology and radiation dose. In: 13th South-East Asian Congress of Medical Physics, SEACOMP 2015, 10 - 12 Dec 2015, Yogyakarta, Indonesia.

Muftah, F. and Mohd. Sani, M. S. H. and Osman, A. R. and Razlan, M. A. and Mohammad, S. (2016) Assessment of mechanical properties of cold formed steel material at elevated temperature. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Hanipah, M. H. and Abdullah, A. H. and Sidik, N. A. C. and Yunus, R. and Yasin, M. N. A. and Muhammad Yazid, M. N. A. W. (2016) Assessment of outdoor thermal comfort and wind characteristics at three different locations in Peninsular Malaysia. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Maruti @ Ezani, Syaza Faiqah and Amerudin, Shahabuddin and Wan Kadir, Wan Hazli and Abdul Rahman, Muhammad Zulkarnain and Mohamed Yusof, Zainab and Ariffin, Azman (2016) The assessment of the proposed dams in reducing flood hazard by using hydrodynamic modelling approach. In: The 11th International Civil Engineering Post Graduate Conference - The 1st Symposium on Expertise of Engineering Design (SEPKA-ISEED 2016), 2016, Skudai, Johor.

Awal, M. R. and Jusoh, M. and Kamarudin, M. R. and Sabapathy, T. and Rahim, H. A. and Malek, M. F. A. (2016) Assessment of wireless power transfer technology for emergency power response. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Sapri, M. and Razak, S. M. A. (2016) Asset management recovery after the disater: state of knowledge. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Malaysia.

Al Qaifi, Gamal Nabil Ali and Zakaria, Rozana and Khalid, Sukeri Mohamad (2016) Association and influence of risk criteria to decision making of green building investment in higher educational campuses. In: International Symposium on Sustainable Development and Management (ISSDM) 2016, 08-09 Oct, 2016, Kuala Lumpur, Malaysia.

Mazhorova, A. and Clerici, M. and Peccianti, M. and Ho, S. P. and Razzari, L. and Jestin, Y. and Pasquazi, A. and Tomasino, A. and Markov, A. and Piccoli, R. and Busacca, A. and Ali, J. and Morandotti, R. (2016) Asymmetric dual-grating micro-slit configuration for broadband solid state coherent detection of THz pulses. In: Conference on Lasers and Electro-Optics, CLEO 2016, 5 June 2016 through 10 June 2016, San Jose; United States.

Shahroom, H. and Buntat, Z. and Sidik, M. A. B. and Nawawi, Z. and Jambak, M. I. (2016) Atmospheric electric field measurement advances in southern peninsular Malaysia. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Salleh, N. M. and Ariff, M. S. M. and Zakuan, N. and Sulaiman, Z. and Saman, M. Z. M. (2016) Attitudinal factors affecting viral advertising pass-on behaviour of online consumers in food industry. In: 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2016, 19 March 2016 through 20 March 2016, Indonesia.

Senawi, Nur Hidayah and Low, Sheau Ting (2016) Attributes to facilitate e-waste recycling behaviour. In: Matec Web of Conferences.

Lee, X. S. and Khamidi, M. F. and See, Z. S. and Lees, T. J. and Chai, C. (2016) Augmented reality for ndimensional building information modelling: contextualization, customization and curation. In: 22nd International Conference on Virtual Systems and Multimedia, VSMM 2016, 17-21 Oct 2016, Kuala Lumpur, Malaysia.

Abrar, M. and Sim, A. T. H. and Hee, J. M. (2016) Automata bases associative classification (AAC) for data mining. In: 2016 6th International Workshop on Computer Science and Engineering, WCSE 2016, 17-19 June 2016, Japan.

Kaneda, T. and Hamada, N. and Mitsukura, Y. (2016) Automatic alignment method for projection mapping on planes with depth. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Khokhar, S. and Mohd. Zin, A. A. and Mokhtar, A. S. and Bhayo, M. A. and Naderipour, A. (2016) Automatic classification of single and hybrid power quality disturbances using Wavelet Transform and Modular Probabilistic Neural Network. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Ho, Aik Hong and Sheikh, Usman Ullah (2016) Automatic detection, segmentation and classification of Abdominal Aortic Aneurysm using deep learning. In: 2016 IEEE 12th International Colloquium on Signal Processing and its Applications (CSPA 2016), 04-06 Mar, 2016, Melaka, Malaysia.

Soberi, M. S. B. M. and Zakaria, M. Z. B. and Ismail, Z. H. and Sammut, K. (2016) Autonomous ship hull inspection by omnidirectional path and view. In: 2016 Autonomous Underwater Vehicles, AUV 2016, 6 November 2016 through 9 November 2016, Japan.

Joudaki, S. and Sunar, M. S. and Kolivand, H. (2016) Background subtraction methods in video streams: a review. In: 4tInternational Conference on Interactive Digital Media, ICIDM 2015, 1 December 2015 through 5 December 2015, Bandung; Indonesia.

Badarudin, Ahmad Ezainuddin and Kamarudin, Suzilawati and Mohammad, Ali Tareq and Mohammed, Hasnoni (2016) Balanced scorecard kills innovation at hospitals: a literature review. In: Proceedings of The 13th International Conference on Innovation & Management, 28-30 Nov, 2016, Wuhan, China.

Kabo, K. S. and Yacob, A. R. and Bakar, W. A. W. A. and Buang, N. A. and Bello, A. M. and Ruskam, A. (2016) BBD optimization of K-ZnO catalyst modification process for heterogeneous transesterification of rice bran oil to biodiesel. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Langkawi; Malaysia.

Lago, H. and Jamlos, M. F. and Hamid, M. R. (2016) Beam steering printed dipole antenna on incorporate of polymeric and HIS. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Orikumhi, I. and Leow, C. Y. (2016) Beamforming and antenna selection for successive relaying with inter-relay interference. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Ariffin, W. N. M. and Salleh, S. (2016) Bi-partition approach of directed cyclic task graph onto multicolumn processors for total completion time minimization task assignment problem. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, 10 August 2016 through 12 August 2016, Songkhla; Thailand.

El Enshasy, H. A. and Johari Masri, M. H. and Malek, R. A. and Othman, N. Z. and Leng, O. M. and Aziz, R. (2016) Bioprocess development for pleuran production by pleurotus ostreatus using submerged cultivation system in semi-industrial scale. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Othman, N. Z. and Ramli, S. and Malek, R. A. and Sarmidi, M. R. and Hatti-Kaul, R. and El Enshasy, H. A. (2016) Bioprocess strategies to optimize thermostable phytase production by Escherichia coli B121 (DE3) when induced with lactose. In: International Congress on Energy 2016, ICE 2016 - Topical Conference at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Yee, K. C. and Suhaila, J. and Yusof, F. and Mean, F. H. (2016) Bivariate copula in Johor rainfall data. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Muhamad Yusoff, Muhamad Roslan and Songip, Ahmad Rahman and Ariffin, Aini Suzana and Baroto, Mas Bambang (2016) Boards engagement in strategy execution towards growth and sustainability. In: International Conference on Innovation in Business and Strategy (ICIBS2016), 2016, Kuala Lumpur, Malaysia.

Mohamad Nor, Mohamad Hafizulazwan and Ismail, Zool Hilmi and Ahmad, Mohd. Ashraf (2016) Broadcast control of multi-agent systems with instability phenomenon. In: 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications, 13-14 Dec, 2016, Pulau Pinang, Malaysia.

Baharudin, N. N. and Ayob, S. M. (2016) Brushless DC motor drive control using Single Input Fuzzy PI Controller (SIFPIC). In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Alel, Mohd. Nur Asmawisham and Mohamad, Edy Tonnizam and Abdullah, Rini Asnida and Abd. Rahman, Mohd. Mirza and Md. Arshad, Muhamad Asyraaf (2016) Building inventory for seismic risk assessment using unmanned aerial vehicle. In: 10TH International Conference on Geotechnical and Transportation Engineering (GEOTROPIKA 2016), 17-18 Feb, 2016, Kuala Lumpur, Malaysia.

Fathi, Mohamad Syazli and Zakiyudin, Mohd. Zulakhmar and Rambat, Shuib and Mohd. Tobi, Siti Uzairiah and Rajab, Nor A'ini and Abdul, Karim Mirasa and Md. Daud, Mohd. Yusof (2016) Building maintenance management in Malaysian institutions of higher education, the context-specific application for information delivery system. In: 8th International Real Estate Research Symposium (IRERS 2016), 26-28 Apr, 2016, Kuala Lumpur, Malaysia.

Bahari, Mahadi and A. Iahad, Noorminshah and Deborah, Libu Paris (2016) Business-to-customer (B2C) electronic commerce: an implementation process view. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016 - Proceedings, 15-17 Aug, 2016, Kuala Lumpur, Malaysia.

Asrokin, A. and Rahim, M. K. A. and Abidin, A. N. Z. and Hashim, N. and Azis, S. A. (2016) Cable modelling comparison for twisted-pair copper plant in Malaysia. In: 5th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2015, 27 November 2015 through 29 November 2015, Penang; Malaysia.

Permatasari, Rosyida and Mohd. Jaafar, Mohammad Nazri (2016) The carbon monoxides reduction and temperature profile of palm shell and palm fiber combustion in fluidized bed combustor. In: AIP Conference Proceedings, 2016, Indonesia.

Ulaganathen, K. and Tharek, A. R. and Islam, R. M. and Abdullah, K. (2016) Case study of rain attenuation at 26 GHz in tropical region (Malaysia) for terrestrial link. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Mohammad, S. A. and Sarmin, N. H. and Hassim, H. I. M. (2016) The central subgroup of the nonabelian tensor square of a torsion free space group. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Shahid, M. and Ibrahim, S. (2016) Change impact analysis with a software traceability approach to support software maintenance. In: 13th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2016, 12-16 Jan 2016, Pakistan.

Ramli, N. H. and Kamarudin, M. R. (2016) The channel measurement and modeling of implantable antenna at 6.0 GHz for wireless body area network. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Wooi, C. L. and Abdul Malek, Z. and Ahmad, N. A. and Mokhtari, M. (2016) Characteristic of preliminary breakdown preceding negative return stroke in Malaysia. In: 2015 IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Hamzah, A. and Johari, Z. and Ismail, R. (2016) A charge-based compact modeling of cylindrical surrounding-floating gate MOSFET (S-FGMOSFET) for memory cell application. In: 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016, 17 August 2016 through 19 August 2016, Kuala Lumpur; Malaysia.

Mei, C. Y. and Sha'Ameri, A. Z. (2016) Classification of digitally modulated signals using cross time-frequency distribution. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Mustapha, M. and Mustafa, M. W. and Khalid, S. N. and Abubakar, I. and Shareef, H. (2016) Classification of electricity load forecasting based on the factors influencing the load consumption and methods used: an-overview. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Najib, N. S. M. and Sim, A. T. H. and Hee, J. M. (2016) Cloud computing opportunities: enhancing interactive visual content usage in higher education learning. In: 20th Pacific Asia Conference on Information Systems, PACIS 2016, 27 June - 1 July 2016, Chiayi, Taiwan.

Moghaddam, F. F. and Rohani, M. B. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) Cloud computing: vision, architecture and characteristics. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Mamoon, I. A. and Islam, A. K. M. M. and Baharun, S. and Ahmed, A. and Komaki, S. (2016) Cluster based architecture and network maintenance protocol for medical priority aware cognitive radio based hospital. In: 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2016, 16 August 2016 through 20 August 2016, United States.

Khan, A. and Salim, N. and Farman, H. (2016) Clustered genetic semantic graph approach for multi-document abstractive summarization. In: International Conference on Intelligent Systems Engineering, ICISE 2016, 15 January 2016 through 17 January 2016, Pakistan.

Junin, Radzuan and Abang Hasbollah, Dayang Zulaika (2016) CO2 storage capacity assessment of deep saline aquifers in Malaysia. In: 18th International Conference on Oil Reserves and Production, 17-18 Oct, 2016, London, United Kingdom.

Wahab, A. and Ishak, D. S. M. and Jamal, M. H. (2016) Coastal vulnerability index at a RAMSAR site: a case study of Kukup mangrove island. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15 - 17 Aug 2016, Kuala Lumpur, Malaysia.

Rozali, Nurul Faizah and Mohd. Zaid, Norasykin and Md. Noor, Norah (2016) Code puzzle apps for learning actionscript 2.0 programming. In: Proceedings of The International University Carnival on E-Learning (LUCEL)2016, 20-21 Sep, 2016, UTM Johor Bahru, Malaysia.

Nifa, F. A. A. and Rahim, S. A. and Rani, W. N. M. W. M. and Ismail, M. N. (2016) Collaborative procurement for developing a sustainable campus. In: 2016 International Conference on Applied Science and Technology, ICAST 2016, 11 April 2016 through 13 April 2016, Kedah; Malaysia.

Mokhtar, M. R. and Abdullah, M. P. and Hassan, M. Y. and Hussin, F. (2016) Combination of AHP-PROMETHEE and TOPSIS for selecting the best Demand Side Management (DSM) options. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Abdul Fattah, S. S. and Mohamed, R. and Jahim, J. M. and Illias, R. M. and Abu Bakar, F. D. and Murad, A. M. A. (2016) Commercial cellulases and hemicellulase performance towards oil palm empty fruit bunch (OPEFB) hydrolysis. In: 2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016, 13 April 2016 through 14 April 2016, Faculty of Science and Technology, Universiti Kebangsaan MalaysiaSelangor; Malaysia.

Selvaraju, R. R. and Kamarudin, M. R. and Jamaluddin, M. H. and Dahri, M. H. and Low, C. Y. (2016) Compact 4-Element beam steerable printed adaptive array antenna for 5G application. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Sabran, M. I. and Rahim, S. K. A. and Yen, L. C. and Rahman, T. A. and Eteng, A. A. and Jizat, N. M. (2016) Compact filtenna with defected ground structure for wireless power transfer application. In: International Symposium on Antennas and Propagation, ISAP 2015, 9-12 Nov 2015, Hobart, Australia.

Jamaludin, A. R. and Yusof, F. and Kane, I. L. and Norrulasikin, S. M. (2016) A comparative study between conventional ARMA and Fourier ARMA in modeling and forecasting wind speed data. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Viswanathan, K. K. and Karthik, K. and Sanyasiraju, Y. V. S. S. and Aziz, Z. A. (2016) Comparative study of free vibration of anti-symmetric angle-ply laminated plates. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Sharifmuddin, N. B. and Ise, T. and Suwa, T. (2016) Comparative study of series and parallel schemes for stabilization of a microgrid integrated with a solar thermal cogeneration system using virtual synchronous generator control. In: 2016 International Energy and Sustainability Conference, IESC 2016, 30 June 2016 through 1 July 2016, Cologne; Germany.

Salam, Z. and Ramli, M. Z. and Ahmed, J. (2016) Comparative study of software and hardware solutions for partial shading in PV system. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Thanoon, T. Y. and Adnan, R. (2016) Comparison between Bayesian structural equation models with ordered categorical data. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Ngoc, C. L. and Choi, G. I. and Oh, J. T. and Mohd. Ghazali, N. (2016) The comparison of experiment results and CFD simulation in the heat pump system using thermobank and two phase ejector for heating room and cold storage. In: 4th IIR International Conference on Sustainability and the Cold Chain, 7-9 April 2016, Auckland, New Zealand.

Putri, N. T. and Sha'Ri Mohd., Y. and Irianto, D. (2016) Comparison of quality engineering practices in Malaysian and Indonesian automotive related companies. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

Qazi, S. H. and Mustafa, M. W. B. and Soomro, S. and Larik, R. M. (2016) Comparison of reference signal extraction methods for active power filter to mitigate load harmonics from wind turbine generator. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Ahmad, Muhammad 'Aasim Asyafi'ie and Harun, Mokhtar and Khalid, Puspa Inayat and Shapiai@Abd.Razak, Mohd. Ibrahim and Ibrahim, Md. Najib and Abdul Hamid, Siti Zaleha (2016) Comparison of the themes of Malaysian Friday sermons between the year 2010 and 2015. In: 2016 International Conference on Electrical, Electronic, Communication & Control Engineering, 2016, Skudai, Johor.

Gaithuru, J. N. and Bakhtiari, M. and Salleh, M. and Muteb, A. M. (2016) A comprehensive literature review of asymmetric key cryptography algorithms for establishment of the existing gap. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Nawi, I. N. M. and Ali, J. and Yupapin, P. P. (2016) A comprehensive treatment of parametric effect in a silicon microring resonator. In: A comprehensive treatment of parametric effect in a silicon microring resonator, 19 December 2015 through 20 December 2015, Malaysia.

Razavi, Meisam and Ogunbode, Ezekiel Babatunde and Mohamad Yatim, Jamaludin and Razavi, Masoud and Mizal Azzmi, Norazura (2016) Compressive properties of kenaf/vinylester composite with different fiber volume content. In: 2nd International Conference on Science, Engineering and The Social Science (ICSESS 2016), 29 May - 01 Jun, 2016, Universiti Teknologi Malaysia, Johor..

Nazar, Kashif and Kareem Sangawi, Ali Wahab and Mohamed Murid, Ali Hassan and Yeak, Su Hoe (2016) The computation of zeros of Ahlfors map for doubly connected regions. In: Aip Conference Proceedings, United States of America.

Nazar, Kashif and Mohamed Murid, Ali Hassan and Kareem Sangawi, Ali Wahab (2016) The computation of zeros of Ahlfors map for multiply connected regions. In: International Conference & Workshop on Mathematical Analysis (ICWOMA 2016), 2016.

Amir, M. A. U. and Maimun, A. and Mat, S. and Saad, M. R. (2016) Computational analysis of aerodynamic characteristics for wing in ground effect craft in lateral stability. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Yusoff, Yusliza and Mohd. Zain, Azlan and Ngadiman, Mohd. Salihin (2016) Computational approach for multi performances optimization of EDM. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 2016.

Sakri, F. M. and Ali, M. S. M. and Salim, S. A. Z. S. (2016) Computational investigations and grid refinement study of 3D transient flow in a cylindrical tank using OpenFOAM. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Mohamad Kasim, Nur Farhana and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Ikegaya, Naoki and Abd. Razak, Azli (2016) Computational study on the influence of different opening position on wind-induced natural ventilation in urban building of cubical array. In: Procedia Engineering, 30 May - 1 Jun, 2016, University Town, Nus, Singapore.

Saktioto, Toto and Farma, R. and Irawan, D. and Sufi, M. and Ismail, F. D. (2016) Computationally numerical experiment of carbon species densities for thermal plasma dynamic. In: 1st International Conference on Information Technology, Information Systems and Electrical Engineering, ICITISEE 2016, 23 August 2016 through 24 August 2016, Yogyakarta; Indonesia.

Azzeri, M. N. and Adnan, F. A. and Adi, M. and Md Zain, M. Z. (2016) A concept design of three rudders-shaped like body in columns for low-drag USV. In: 2016 International Conference on Innovative Research, ICIR 2016, 19 May 2016 through 20 May 2016, Romania.

Azmin, N. A. M. and Ismail, H. N. and Khalifah, Z. (2016) A conceptual study: muslim tourists’ perceived value in sharia compliant hotels (SCH) in Malaysia. In: 3rd International Hospitality and Tourism Conference, IHTC 2016 and 2nd International Seminar on Tourism, ISOT 2016, 10-12 Oct 2016, Bandung, Indonesia.

Sarkheyli, A. and Alias, R. A. and Carlsson, S. and Kajtazi, M. (2016) Conceptualizing knowledge risk governance as a moderator to potentially reduce the risks in knowledge sharing. In: 20th Pacific Asia Conference on Information Systems, PACIS 2016, 27 June - 1 July 2016, Chiayi, Taiwan.

Mohamed Murid, Ali Hassan and A.M. Yunus, Arif (2016) Conformal mapping of unbounded multiply connected regions onto logarithmic spiral slit with infinite straight slit. In: The 4th International Conference of Mathematical Sciences : Championing the Way in a Problem Based and Data Driven Society, ICMS 2016, 15-17 Nov, 2016, Putrajaya, Malaysia.

Mohammad, S. A. and Sarmin, N. H. and Hassim, H. I. M. (2016) Consistent polycyclic presentation of a Bieberbach group with a nonabelian point group. In: 7th SEAMS UGM International Conference on Mathematics and Its Applications: Enhancing the Role of Mathematics in Interdisciplinary Research, 18-21 Aug 2015, Yogyakarta, Indonesia.

Mohd. Zin, Nur Ariffin and Asmuni @ Hasmuni, Hishammuddin and Abdull Hamed, Haza Nuzly and Othman, Muhamad Razib and Kasim, Shahreen and Roslan, Rosfuzah (2016) Contact lens classification by using segmented lens boundary features. In: International Research Conference and Innovation Exhibition (IRCIE 2016), 18-20 Oct, 2016, Johor Bahru, Malaysia.

Naderipour, A. and Zin, A. A. M. and Habibuddin, M. H. and Moradi, M. and Khavari, A. H. (2016) Control of compensation devices by synchronous reference frame and fourier control methods to improve the power quality in a microgrid. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Ismail, M. F. and Sam, Y. M. and Sudin, S. and Aripin, M. K. (2016) A control performance analysis for MacPherson active suspension system under bounce sine sweep road profile. In: 4th International Conference on Quantitative Sciences and Its Applications, ICOQSIA 2016, 16 August 2016 through 18 August 2016, Selangor; Malaysia.

Naderipour, A. and Zin, A. A. M. and Habibuddin, M. H. and Guerrero, J. M. (2016) A control scheme to improve the power quality with the absence of dedicated compensation devices in microgrid. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Ikeda, S. (2016) Controlling of deposition time as an effective parameter on purified growth CNTs based on TCVD method. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, IC-NET 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Weigl, J. D. and Henz, M. and Inayati, Inayati and Saidi, H. (2016) Converted battery-powered electric motorcycle and hydrogen fuel cell-powered electric motorcycle in South East Asia: development and performance test. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Indonesia.

Joseph, S. B. and Loo, H. R. and Ismail, I. and Marsono, M. N. (2016) Cooperative learning for online in-network performance monitoring. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Eslahi, M. and Yousefi, M. and Naseri, M. V. and Yussof, Y. M. and Tahir, N. M. and Hashim, H. (2016) Cooperative network behaviour analysis model for mobile Botnet detection. In: 2016 IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2016, 30 May 2016 through 31 May 2016, Penang; Malaysia.

Johar, F. and Nordin, S. Z. and Potts, C. N. (2016) Coordination of production scheduling and vehicle routing problem with due dates. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Jasman, Siti Maryam and Hendrik, O. Lintang and Lee, Siew Ling and Yuliati, Leny (2016) Copper modified carbon nitride as fluorescence sensor for nitrate ions. In: 16th Asia Pacific International Symposium on Microscale and Separation And Analysis, 07-10 Nov, 2016, Johor Bahru, Malaysia.

Roslan, N. and Endud, S. and Ramli, Z. and Lintang, H. O. (2016) Copper(II) porphyrin as biomimetic catalyst for oxidation of trimethylphenol. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Khan, Samiullah and Zainul Alam, Siti Atiqah and Abdul Aziz, Nur Syifaaiyah and Jahan, Nusrat and Javed, Muhammad Arshad (2016) Correlation studies for growth and physiological parameters in upland and lowland rice varieties. In: 4th International Science Postgraduate Conference 2016, 22-24 Feb, 2016, Universiti Teknologi Malaysia, Johor.

Mat Zaid, A. F. and Yu, L. C. and Kamarudin, M. R. (2016) CPW fed WLAN monopole antenna with gain improvement. In: International Electrical Engineering Congress, iEECON 2016, 2-4 March 2016, Chiang Mai, Thailand.

Othman, N. Z. S. and Rahim, M. S. M. and Ghazali, M. and Anjomshoae, S. T. (2016) Creating 3D/Mid-air gestures. In: 4th IGNITE Conference and 2016 International Conference on Advanced Informatics: Concepts, Theory and Application, ICAICTA 2016, 16 August 2016 through 19 August 2016, Penang; Malaysia.

Othman, Nur Zuraifah Syazrah and Mohd. Rahim, Mohd. Shafry and Ghazali, Masitah and Anjomshoae, Sule T. (2016) Creating 3D/Mid-air gestures design considerations for user- centered approach. In: International Conference on Advanced Informatics: Concepts, Theory and Application (ICAICTA) 2016, 2016, Penang, Malaysia.

Ahmad, N. B. and Jumaat, N. F. B. (2016) Critical success factors to improve interactions in online social learning environment. In: 4th International Conference on Information and Communication Technology, ICoICT 2016, 25 May 2016 through 27 May 2016, Bandung; Indonesia.

Hamid, M. A. and Ali, N. M. M. and Sarmin, N. H. and Erfanian, A. (2016) The cubed commutativity degree of dihedral groups. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Aziz, Z. A. and Bahar, A. (2016) The current scenario of industrial mathematics in Malaysia. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Thailand.

Abd. Rashid, M. H. and Ahmad, F. S. and Hasanordin, R. (2016) Customer reactions to service failure and recovery in the restaurant industry: a covariance-based sem approach. In: 27th International Business Information Management Association Conference - Innovation Management and Education Excellence Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2016, 4-5 May 2016, Milan, Italy.

Abdullah, Z. B. and Razani, W. A. S. S. B. W. M. and Chyang, P. J. and Hisam, R. B. H. (2016) The cytotoxicity effect of Nephelium lappaceum leaves extract on human cancer cells. In: 2016 International Conference on Applied System Innovation, IEEE ICASI 2016, 28 May 2016 through 1 June 2016, Okinawa Convention Center4-3-1 MashikiGinowan City Okinawa; Japan.

Asadi, S. and Hussin, A. R. C. and Saedi, A. (2016) Decision makers intention for adoption of Green Information Technology. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur; Malaysia.

Al-Balushi, F. M. and Bahari, M. and Rahman, A. A. (2016) Defining e-Government integration and its objective: a systematic literature review. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur Convention Centre Kuala Lumpur; Malaysia.

Yacob, Mohd. Najib and Hassim, Mimi Haryani (2016) Delphi-AHP based methodology for selecting causal factors of marine transportation accidents. In: 9th Regional Conference on Chemical Engineering (RCCHE-2016), 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Derivation of Morison's force coefficients by three alternative forms of the method of moments. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Design and analysis of a satellite-mount array-fed parabolic antenna by electromagnetic computations. In: 21st Asia-Pacific Conference on Communications, APCC 2015, 14-16 Oct 2015, Kyoto, Japan.

Zulkifli, N. A. and Rahman, A. A. and Hassan, M. I. (2016) Design of 3D topological data structure for 3D cadastre objects. In: International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Rahman, H. A. and Rahim, S. K. A. and Abedian, M. and Najib, N. (2016) Design of a flexible antenna using printed silver loaded epoxy on PDMS/plastic substrate for wearable applications. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Ahmad, Y. A. and Nazim, N. J. and Yuhaniz, S. S. (2016) Design of a terminal node controller hardware for CubeSat tracking applications. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Othman, M. A. and Ruthrabathi, S. and Abd. Aziz, M. Z. A. and Sulaiman, H. A. and Che Pee, A. N. and Othman, M. F. I. and Kamaruddin, M. R. (2016) Design of mixed bow-tie and ice-cream cone antenna at 120 GHz for millimeter wave application. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Tengah, Z. and Ali, M. T. and Rahman, N. H. A. and Pasya, I. and Hamid, S. A. and Baba, N. H. and Yamada, Y. (2016) Design of serial feeds for a bifurcated beam of bend-array configuration. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Sulaiman, S. F. and Rahmat, M. F. and Faudzi, A. A. M. and Osman, K. (2016) Design of unconstrained and constrained model predictive control for pneumatic actuator system: Set-point tracking. In: IEEE Conference on System, Process and Control, ICSPC 2015, 19 December 2015 through 20 December 2015, Malaysia.

Abdullah, M. A. and Seman, N. (2016) Design of wideband microstrip-slot six-port complex ratio measuring unit. In: International Symposium on Antennas and Propagation, ISAP 2015, 9-12 Nov 2015, Hobart, Australia.

Sudiro, S. and Yusof, S. M. and Revino, Revino (2016) Design simulation and information dashboard for manufacturing control using systematic approach: a case study of hospital beds production. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kedah, Malaysia.

Nee, C. K. and Ibrahim, N. H. and Yahaya, N. (2016) Designing an iMLeaming apps as formulated ideal personalised social collaborative mobile learning environment. In: IEEE Conference on e-Learning, e-Management and e-Services, IC3e 2015, 24-26 Aug 2015, Melaka, Malaysia.

Azman, A. A. and Ibrahim, S. and Rahim, R. A. and Wahid, H. and Azmi, A. and Arsad, A. and Yunus, M. A. M. (2016) Detecting mechanism of planar electromagnetic sensor in cooking oil discrimination. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2015, 24 November 2015 through 25 November 2015, Kuala Lumpur; Malaysia.

Ng, H. L. and Hashim, M. and Jaw, S. W. (2016) Detection of precast concrete beam defects using finite-difference time-domain modelling. In: 3rd IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2015, 24 November 2015 through 25 November 2015, Kuala Lumpur; Malaysia.

Sofian, H. and Ming, J. T. C. and Noor, N. M. (2016) Detection of the lumen boundary in the coronary artery disease. In: IEEE International WIE Conference on Electrical and Computer Engineering, WIECON-ECE 2015, 19-20 Dec 2015, Dhaka, Bangladesh.

Bukhori, Iksan and Ismail, Zool Hilmi (2016) Detection strategy for kidnapped robot problem in Monte Carlo localization based on similarity measure of environment. In: 2016 IEEE 6TH International Conference on Underwater System Technology: Theory and Applications, 13-14 Dec, 2016, Pulau Pinang, Malaysia.

Rajendran, R. and Zainuddin, Z. M. (2016) The determining factors in prescribing anti-hypertensive drugs to first-ever ischemic stroke patients. In: 3rd International Conference on Industrial Engineering, Management Science and Applications, ICIMSA 2016, 23 May 2016 through 26 May 2016, South Korea.

Hasab, Hashim Ali and Ahmad, Anuar and Marghany, Maged Mahmoud and Ziboon, Abdul Razzak (2016) Develop algorithm for change detection of the salinity from landsat-8 images. In: 6Th IGCESH 2016, 2016, Skudai, Johor.

Mohd. Othman, Mohamad Nurfalihin and Hasan, Haswadi and Haron, Habibollah (2016) Developing reflex-based agent with unity3D game engine. In: The 3rd International Conference on Computational Science and Technology, 2016, Kota Kinabalu, Malaysia.

Gill, J. and Shariff, N. S. and Omar, K. M. and Din, A. H. M. and Amin, Z. M. (2016) Development of a time-dependent 3-parameter helmert datum transformation model: A case study for Malaysia. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Zhang, W. and An, Z. and Luo, Z. and Li, W. and Zhang, Z. and Rao, Y. and Yeong, C. F. and Duan, F. (2016) Development of a voice-control smart home environment. In: 2016 IEEE International Conference on Robotics and Biomimetics, ROBIO 2016, 3 - 7 Dec 2016, Qingdao, China.

Adiputra, D. and Mazlan, S. A. and Zamzuri, H. and Rahman, M. A. A. (2016) Development of controller for Passive Control Ankle Foot Orthoses (PICAFO) based on Electromyography (EMG) signal and angle. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Sunan HotelSurakarta; Indonesia.

Lee, L. M. and Yasuo, T. and Wei, L. C. and Yuan, L. C. (2016) Development of data acquisition system for consolidated undrained triaxial test. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Malaysia.

Ohka, M. and Nomura, R. and Yussof, H. and Zahari, N. I. (2016) Development of human-fingertip-sized three-axis tactile sensor based on image data processing. In: 9th International Conference on Sensing Technology, ICST 2015, 8-11 Dec 2015, Auckland, New Zealand.

Jurimah, A. J. and Zulkarnay, Z. and Ibrahim, B. and Shazwani, S. and Mohamad Alif, A. R. and Ruzairi, A. R. and Abdul Nasir, M. A. K. (2016) Development of magnetic induction spectroscopy system in biomedical application to detect jaundice. In: 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015, 21 December 2015 through 22 December 2015, Penang; Malaysia.

Zheng, C. Y. and Chuan, L. Y. and Sien, T. C. and Yunus, J. (2016) Development of normative human gait kinematics and kinetics database for Malaysian university students. In: 35th IEEE Region 10 Conference, TENCON 2015, 1 - 4 Nov 2015, Macau.

Shamsul Bahri, Nur Ayuni and Ahmad Azli, Naziha and A. Samah, Narina (2016) Development of Problem-Solving Process Rubric (PPR) in assessing problem solving skills. In: 6th Regional Conference on Engineering Education 2016 (RCEE 2016), 2016, Kuala Lumpur, Malaysia.

Ramli, N. and Maskin, M. and Tom, P. P. and Husain, N. and Farid, M. F. A. and Ramli, S. and Adnan, A. S. and Abidin, N. H. Z. (2016) Development of the ageing management database of PUSPATI TRIGA reactor. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Daliman, S. and Abu-Bakar, S. A. R. and Md Nor Azam, S. H. (2016) Development of young oil palm tree recognition using Haar- based rectangular windows. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Elias, N. A. and Samsuri, N. A. and Rahim, M. K. A. and Othman, N. (2016) Deviations in em radiation absorption due to mechanical deformation of dual-band dipole textile antenna. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Liew, S. S. and Khalil-Hani, M. and Bakhteri, R. (2016) Distributed B-SDLM: accelerating the training convergence of deep neural networks through parallelism. In: 14th Pacific Rim International Conference on Artificial Intelligence, PRICAI 2016, 22-26 Aug 2016, Phuket, Thailand.

Sulaiman, S. F. and Rahmat, M. F. and Faudzi, A. A. M. and Osman, K. (2016) Disturbance rejection using Model Predictive control for pneumatic actuator system. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Omar, R. S. and Wagiran, H. and Saeed, M. A. (2016) Dosimetric properties of dysprosium doped calcium magnesium borate glass subjected to Co-60 gamma ray. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Ng, C. R. and Than, J. C. M. and Noor, N. M. and Rijal, O. M. (2016) Double segmentation method for brain region using FCM and graph cut for CT scan images. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Ismail, S. N. S. and Rahim, S. K. A. and Ibrahim, A. and Sabran, M. I. and Mohamad, H. (2016) Dual band inverted h-shaped slot monopole antenna for WLAN applications. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Ayop, O. and Rahim, M. K. A. and Murad, N. A. and Samsuri, N. A. (2016) Dual resonance circular ring-shaped metamaterial absorber with wide operating angle. In: International Symposium on Antennas and Propagation, ISAP 2015, 9-12 Nov 2015, Hobart, Australia.

Suria, A. K. and Idris, R. M. (2016) Dual-axis solar tracker based on predictive control algorithms. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Zakariah, A. and Jamian, J. J. and Yunus, M. A. M. (2016) Dual-axis solar tracking system based on fuzzy logic control and Light Dependent Resistors as feedback path elements. In: 2015 IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Ayop, O. and Rahim, M. K. A. and Murad, N. A. and Samsuri, N. A. (2016) Dual-directional polarization insensitive multiband metamaterial absorber. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Oluwasola, E. A. and Hainin, M. R. and Aziz, Md. M. A. (2016) Durability assessment of dense-graded asphalt incorporating electric arc furnace steel slag and copper mine tailings. In: 8th International Conference on Maintenance and Rehabilitation of Pavements, MAIREPAV 2016, 27-29 July 2016, Singapore.

Moghaddam, F. F. and Majd, A. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) A dynamic classification index to enhance data protection procedures in cloud-based environments. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Zakaria, M. A. and Zamzuri, H. and Mazlan, S. A. (2016) Dynamic curvature steering control for autonomous vehicle: performance analysis. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

Gu, X. and Song, P. and Rao, Y. and Soo, Y. G. and Yeong, C. F. and Tan, J. T. C. and Asama, H. and Duan, F. (2016) Dynamic image stitching for moving object. In: 2016 IEEE International Conference on Robotics and Biomimetics, ROBIO 2016, 3-7 Dec 2016, Qingdao, China.

Ismail, R. and Ibrahim, A. and Hamid, H. A. and Mahmood, M. R. and Adnan, A. (2016) Dynamic mechanical behavior magnetorheological nanocomposites containing CNTs: a review. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Zareei, M. and Islam, A. K. M. M. and Mansoor, N. and Baharun, S. (2016) Dynamic spectrum allocation for cognitive radio ad hoc network. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Bangladesh.

Djauhari, M. A. and Lee, G. S. (2016) Dynamics of NYSE correlation structure during global crisis in 2008: evidence from complex network analysis. In: International Conference on Advanced Computer Science and Information Systems, ICACSIS 2015, 10-11 Oct 2015, Depok, Indonesia.

Ahmad Rosli, Shahrizal and Songip, Ahmad Rahman (2016) E-procurement and supply chain performance in TM Berhad. In: Proceedings International Conference on Innovation and Management, Malaysia 2016, 2016, Kuala Lumpur, Malaysia.

Ting, O. S. and Ariff, M. S. M. and Zakuan, N. and Sulaiman, Z. and Saman, M. Z. M. (2016) E-Service Quality, e-satisfaction and e-loyalty of online shoppers in business to consumer market, evidence form Malaysia. In: 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2016, 19 March 2016 through 20 March 2016, Indonesia.

Hussein, S. S. and Ismail, Z. and Mahrin, M. N. (2016) EA innovations in managing public sectors: issues & challenges. In: 27th International Business Information Management Association Conference - Innovation Management and Education Excellence Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2016, 4-5 May 2016, Milan, Italy.

Abdul-Kadir, N. A. and Othman, M. A. and Safri, N. M. (2016) ECG features extraction using second-order dynamic system and regeneration using hybrid recurrent network. In: 2016 IEEE International Conference on Signal Processing, Communications and Computing, ICSPCC 2016, 5 August 2016 through 8 August 2016, City University of Hong KongHong Kong; China.

See, T. A. and Wai, C. W. and Zen, I. S. (2016) Ecological footprint of research university students: a pilot case study in Universiti Teknologi Malaysia. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Ngadiron, Z. and Radzi, N. H. and Hassan, M. Y. (2016) The economic benefits of generation revenue assessment in pool-based market model for restructured electricity supply industry. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Thailand.

Zenian, S. and Ahmad, T. and Idris, A. (2016) Edge detection of flat electroencephalography image via classical and fuzzy approach. In: 2nd International Conference on Soft Computing in Data Science, SCDS 2016, 21 - 22 Sept 2016, Kuala Lumpur, Malaysia.

Nabgan, Bahador and Tuan Abdullah, Tuan Amran and Nabgan, Walid and Tahir, Muhammad (2016) Efect of pellet size on the steam reforming of phenol-pet waste to hydrogen producton over Ni/La-promoted Al2O3 catalyst. In: 5th Conference of Energy Emerging and Process Technology 2016, 2016, Negeri Sembilan, Malaysia.

Awang, A. and Ghoshal, S. K. and Sahar, M. R. and Arifin, R. (2016) Effect of Au NPs on the spectral modification of Er-doped zinc sodium tellurite glass. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Mohamad, N. and Mazlan, S. A. and Ubaidillah, Ubaidillah (2016) Effect of carbonyl iron particles composition on the physical characteristics of MR grease. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Junin, Radzuan and Nasri, Noor Shawal and Hammuda Aluhwal, Omar Kalifa (2016) Effect of CO2 content, reservoir temperature and pressure of SACW on oil recovery. In: International Conference on Science, Engineering, Management and Social Science (INSEMSS 2016), 06-OCT-16, MALAYSIAUTM JB.

Mohamed, F. and Hasbullah, H. and Jami'An, W. N. R. and Salleh, W. N. H. W. and Ibrahim, N. and Ali, R. R. (2016) Effect of coagulant bath on the gas permeation properties of cellulose acetate asymmetric membrane. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Hassan, M. I. and Rahmat, N. H. (2016) The effect of coastline changes to local community's socioeconomic. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Amran, N. A. and Jusoh, M. (2016) Effect of coolant temperature and circulation flowrate on the performance of a vertical finned crystallizer. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Manshor, H. and Ramli, A. W. and Ahmad Azhar, A. Z. and Abdullah, E. C. and Ahmad, Z. A. (2016) Effect of Cr2O3-TiO2 addition on the physical properties of zirconia toughened alumina. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Zaki, N. I. M. and Husain, M. K. A. and Shuhaimy, N. A. and Najafian, G. (2016) The effect of different methods of simulating water particle kinematics on the 100-year responses. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19 - 24 June 2016, Busan, South Korea.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Najafian, G. (2016) The effect of different methods of simulating wave induced water particle kinematics on the 100-year responses. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Rabat, N. E. and Hashim, S. and Majid, R. A. (2016) Effect of different monomers on water retention properties of slow release fertilizer hydrogel. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Munir, A. B. and Yasin, S. H. M. and Mas'ud, A. A. and Bani, N. A. (2016) Effect of diffuse radiation on the performance of a rotationally asymmetrical optical concentrator. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Wijayaningtyas, M. and Sipan, I. and Wai, C. W. (2016) Effect of environmental knowledge and concern toward attitude of green home buyers’ intention in Surabaya. In: 3rd International Conference on Management and Technology in Knowledge, Service, Tourism and Hospitality, SERVE 2015, 1 2 Aug 2015, Bandung, Indonesia.

Chong, K. C. and Lim, C. E. and Lai, S. O. and Lau, W. J. (2016) Effect of ethylene glycol on polymeric membrane fabrication for membrane distillation. In: 2nd International Conference on Science and Engineering of Materials, ICoSEM 2015, 16-18 Nov 2015, Kuala Lumpur, Malaysia.

Barrera-Medrano, M. E. and Newton, P. and Martinez-Botas, R. and Rajoo, S. and Tomita, I. and Ibaraki, S. (2016) Effect of exit pressure pulsation on the performance and stability limit of a turbocharger centrifugal compressor. In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, GT 2016, 13-17 June 2016, Seoul, South Korea.

Jusoh, M. S. M. and Yahya, M. Y. and Hussein, N. I. S. (2016) The effect of fibre layering pattern in resisting bending loads of natural fibre-based hybrid composite materials. In: 2nd International Conference on Chemical and Material Engineering, ICCME 2015, 27-28 Dec 2015, Phuket, Thailand.

Marto, A. and Tan, C. S. and Makhtar, A. M. and Pakir, F. and Chong, S. Y. (2016) Effect of fines content on critical state parameters of sand matrix soils. In: 1st International Conference on Science and Technology 2015, ICST 2015, 11 November 2015 through 13 November 2015, Indonesia.

Aryanto, D. and Ismail, A .K. and Othaman, Z. (2016) Effect of GaAs multi-atomic steps thickness on the structural and optical properties of self-assembled In0.5Ga0.5As quantum dots. In: International Symposium on Frontier of Applied Physics, ISFAP 2015, 5-7 Oct 2015, West Java, Indonesia.

Albert Alim, Emilly and Ismail, Abd. Khamim and Omar, Muhammad Firdaus (2016) Effect of methane flow rate to SiC thin films morphology deposited by VHF-PECVD. In: International Conference of The Advancement of Materials and Nanotechnology IV 2016, 09-11 Nov, 2016, Langkawi, Kedah, Malaysia.

Lau, C. P. and Abdul-Wahab, M. F. and Jaafar, J. and Chan, G. F. and Rashid, N. A. A. (2016) Effect of pH and biological media on polyvinylpyrrolidone-capped silver nanoparticles. In: 2nd International Conference on Functional Materials and Metallurgy, ICoFM 2016, 28 May 2016, Malaysia.

Teoh, C. K. and Abdullah, M. Y. C. and Haron, H. (2016) Effect of pre-processors on solution quality of university course timetabling problem. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 December 2015 through 14 December 2015, Kuala Lumpur; Malaysia.

Chiet, K. T. P. and Kassim, K. A. and Chen, K. B. and Martula, U. and Yah, C. S. and Arefnia, A. (2016) Effect of reagents concentration on biocementation of tropical residual soil. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Malaysia.

Rosnan, R. M. and Othaman, Z. and Ati, A. A. and Hussin, R. and Dabagh, S. and Zare, S. (2016) The effect of sintering temperature on the structural and magnetic properties of Ni-Mg substituted CoFe2O4 nanoparticles. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Mohammad Yusoff, Nurulhuda and Sahar, Md. Rahim (2016) Effect of sm3+ concentration on physical properties of magnesium tellurite glasses containing silver nanoparticles. In: Materials Science Forum, Switzerland.

Yusoff, N. M. and Sahar, M. R. (2016) Effect of Sm3+ concentration on physical properties of magnesium tellurite glasses containing silver nanoparticles. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25 - 27 Nov 2014, Pahang, Malaysia.

M. Sultan Suhai Buddeen, Mumtaz and Abdul Hamid, Mariani and Md. Salleh, Liza (2016) Effect of storage temperature on face serum stability. In: 6th International Conference on Biotechnology for the Wellness Industry 2016 (ICBWI 2016), 16-17 Aug, 2016, Melaka, Malaysia.

Khairi, M. H. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Ahmad, K. Z. K. and Aziz, S. A. A. and Yunus, N. A. (2016) Effect of sucrose acetate isobutyrate ester on the epoxidised natural rubber based magnetorheological elastomers. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Mazlan, N. A. and Yahya, W. J. and Ithnin, A. M. and Ahmad, M. A. (2016) The effect of tap water emulsified fuel on exhaust emission of single cylinder compression ignition engine. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Ihwani, Siti Suhaila and Muhtar, Adibah and Musa, Norhafizah and Hehsan, Aminudin and Abdul Latif, Adibah and Zetty, Nurzuliana Rashed and Ab., Halim Tamuri (2016) The effect of teacher's readiness in teaching sexual education elements in secondary school. In: International Conference on Science, Engineering, Management and Social Science (ICSEMSS2016) 2016, 06-08 Oct, 2016, Johor Bahru, Malaysia.

Ismail, S. and Musa, T. A. and Aris, W. A. W. and Gopir, G. (2016) Effect of the X5.4 class solar flare event of solar cycle 24 on the gps signal reception in Peninsular Malaysia. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Manshor, H. and Wan Sabri, W. M. I. and Ramli, A. W. and Ahmad Azhar, A. Z. and Abdullah, E. C. and Ahmad, Z. A. (2016) Effect of titania and magnesia on the physical properties of zirconia toughened alumina. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Subramaniam, M. N. and Goh, P. S. and Ismail, A. F. and Lau, W. J. (2016) Effect of titania nanotubes on the flux and separation performance of polyethersulfone membranes. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Kaviri, A. G. and Jaafar, M. N. M. (2016) Effects of air compressor pressure ratio on exergy efficiency, cost and environment of a Combined Cycle Power Plant. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Khoo, Wei How and Mohamed Sultan, Suhana and Sahdan, M. Z. (2016) The effects of gas flow rate and annealing on the morphological properties of zinc oxide nanostructures thin film using chemical vapour deposition process. In: Regional Annual Fundamental Science Symposium, 18-20 May, 2016, Kuala Lumpur, Malaysia.

Shah, S. M. A. and Latiff, M. S. A. and Riaz, T. and Chowdhry, B. S. (2016) Effects of Haze weather condition on 980nm free space optical communication in Malaysia. In: 3rd International Conference on Computing for Sustainable Global Development, INDIACom 2016, 16 March 2016 through 18 March 2016, India.

Abd. Rahim, Siti Hajar and Mohd. Rashid, Mohd. Yusof and Andenan, Nurnadia and Mohd. Rashid, Ammar (2016) The effects of newly formulated filter aids material loading on pressure drop and particle penetration. In: International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2016), 2016, South Korea.

Tengku Mohd, T. A. and Baco, J. and Bakar, N. F. A. and Jaafar, M. Z. (2016) Effects of particle shape and size on nanofluid properties for potential Enhanced Oil Recovery (EOR). In: 2016 5th International Conference on Chemical and Process Engineering, ICCPE 2016, 23 May 2016 through 25 May 2016, South Korea.

Marto, A. and Sohaei, H. and Hajihassani, M. and Makhtar, A. M. (2016) Effects of tunnel face distance on surface settlement. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Chieng, T. M. and Omar, Z. and Kadiman, S. (2016) Efficient morphological-based edge detection algorithm for computed tomography cardiac images. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Wagiman, A. and Mohidin, H. H. B. and Ismail, A. S. (2016) Elderly Care Centre. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science, AeroEarth 2015, 26 - 27 Sept 2015, Jakarta, Indonesia.

Musa, F. N. and Bashir, N. and Ahmad, M. H. (2016) Elecrical treeing performance of plasma-treated silicone rubber based nanocomposites. In: 5th IEEE International Conference on High Voltage Engineering and Application, ICHVE 2016, 19 September 2016 through 22 September 2016, China.

Bhatti, A. R. and Salam, Z. and Ashique, R. H. (2016) Electric vehicle charging using photovoltaic based microgrid for remote islands. In: Applied Energy Symposium and Submit: Renewable Energy Integration with Mini/Microgrid, REM 2016, 19 April 2016 through 21 April 2016, Maldives.

Sultan, S. M. and Pu, S. H. and Fishlock, S. J. and Wah, L. H. and Chong, H. M. H. and McBride, J. W. (2016) Electrical behavior of nanocrystalline graphite/p-Si Schottky diode. In: 16th IEEE International Conference on Nanotechnology - IEEE NANO 2016, 22 August 2016 through 25 August 2016, Japan.

Baharin, R. H. B. M. and Tuan, N. T. and Yamada, Y. and Kamardin, K. B. (2016) Electrical characteristic changes by setting conditions of Normal-Mode Helical Antenna in a phantom. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Yokoi, T. and Kobayashi, M. and Ibrahim, R. (2016) Emoticon extraction method based on eye characters and symmetric string. In: Proceedings - 2015 IEEE International Conference on Systems, Man, and Cybernetics, SMC 2015, 9 - 12 Oct 2015, Hong Kong.

Jiram, W. R. A. and Bujang, A. A. and Zarin, H. A. and Anuar, F. H. M. (2016) Empirical evaluation of Gen Y housing affordability. In: 3rd International Conference on Management and Technology in Knowledge, Service, Tourism and Hospitality, SERVE 2015, 1-2 Aug 2015, Bandung, Indonesia.

Abidin, Nur Izieadiana and Zakaria, Rozana and Mohd. Pauzi, Nurul Noraziemah and Al Qaifi, Gamal Nabil and Sahamir, Shaza Rina and Shamsuddin, Siti Mazzuana (2016) Energy efficiency initiatives in a campus building. In: 2nd International Conference of Low Carbon Asia (ICLCA2016), 23-25 Nov, 2016, Kuala Lumpur, Malaysia.

Kassim, M. N. and Maarof, M. A. and Zainal, A. and Wahab, A. A. (2016) Enhanced rules application order to stem affixation, reduplication and compounding words in malay texts. In: 14th International Workshop on Knowledge Management and Acquisition for Intelligent Systems, PKAW2016, 22-23 Aug 2016, Phuket, Thailand.

Ishak, M. K. and Ahmad, N. B. (2016) Enhancement of Learning Management System with adaptive features. In: 5th ICT International Student Project Conference, ICT-ISPC 2016, 27 May 2016 through 28 May 2016, Thailand.

Zali, A. A. B. and Sha'Ameri, A. Z. B. and Mohammed, Y. Y. and Hussin, G. . and Chee Yen, M. (2016) Enhancement of power measurement by decimation in 1/f noise. In: 2015 IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Bansal, A. and Kaiwartya, O. and Singh, R. K. and Prakash, S. (2016) Enhancing fault tolerance and reducing delay in virtual network embedding using NSGA-II. In: IEEE International Conference on Computer, Communication and Control, IC4 2015, 10 - 12 Sept 2015, Indore, India.

Abdullah, A. H. and Surif, J. and Tahir, L. M. and Ibrahim, N. H. and Zakaria, E. (2016) Enhancing students' geometrical thinking levels through Van Hiele's phase-based Geometer's Sketchpad-aided learning. In: 7th IEEE International Conference on Engineering Education, ICEED 2015, 17 November 2015 through 18 November 2015, Kanazawa; Japan.

Daut, M. A. M. and Ahmad, A. S. and Hassan, M. Y. and Abdullah, H. and Abdullah, M. P. and Husin, F. (2016) Enhancing the performance of building looad forecasting using hybrid of GLSSVM - ABC Model. In: 2016 3rd International Conference on Manufacturing and Industrial Technologies, ICMIT 2016, 25 May 2016 through 27 May 2016, Turkey.

Wan Yusoff, Wan Fauziah and Ahmad, Abdul Razak and Ismail, Kamariah (2016) Entrepreneurial ecosystem of small medium industries (SMEs): a preliminary study in Malaysia. In: Proceedings of the 27th International Business Information Management Association Conference, 04-05 May, 2016, Milan, Italy.

Megat Zakaria, Megat Aman Zahiri and Yahaya, Noraffandy and Mohd. Said, Mohd. Nihra Haruzuan and Surif, Johari and Mohd. Zaid, Norasykin and Abdullah, Abdul Halim (2016) Eproject: educational research study management system. In: 2016 Proceedings of The International University Carnival on Elearning (LUCEL)) 2016, 20-21Sep, 2016, Universiti Teknologi Malaysia, Johor.

Karim, M. K. A. and Hashim, S. and Bakar, K. A. and Muhammad, H. and Sabarudin, A. and Ang, W. C. and Bahruddin, N. A. (2016) Establishment of multi-slice computed tomography (MSCT) reference level in Johor, Malaysia. In: 13th South-East Asian Congress of Medical Physics, SEACOMP 2015, 10 - 12 Dec 2015, Yogyakarta, Indonesia.

Mohd Salleh, M. R. and Abdul Rahman, M. Z. and Abu Bakar, M. A. and Rasib, A. W. and Omar, H. (2016) Estimation of aerodynamic roughness and zero plane displacement using medium density of airborne lidar data. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Aris, W. A. W. and Musa, T. A. and Omar, K. (2016) Estimation of co- and postseismic deformation after the mw 8.6 nias-semeulue and mw 8.5 bengkulu earthquakes from continuous GPS data. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Ting, C. M. and Seghouane, A. K. and Salleh, S. H. (2016) Estimation of high-dimensional connectivity in FMRI data via subspace autoregressive models. In: 19th IEEE Statistical Signal Processing Workshop, SSP 2016, 25 June 2016 through 29 June 2016, Spain.

Yunus, M. M. and Din, J. and Lam, H. Y. and Jong, S. L. (2016) Estimation of interfade duration for Ku- and Ka-band satellite communication system in equatorial Malaysia. In: URSI Asia-Pacific Radio Science Conference, URSI AP-RASC 2016, 21 August 2016 through 25 August 2016, Seoul; South Korea.

Sahat, S. and Yusop, Z. and Askari, M. and Ziegler, A. D. (2016) Estimation of soil erosion rates in oil palm plantation with different land cover. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Malaysia.

Ismail, Z. and Abdul Khanan, M. F. and Omar, F. Z. and Abdul Rahman, M. Z. and Mohd Salleh, M. R. (2016) Evaluating error of lidar derived dem interpolation for vegetation area. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Lee, C. S. and Wong, K. Y. (2016) Evaluating knowledge management processes: a fuzzy logic approach. In: International Multiconference of Engineers and Computer Scientists 2016, IMECS 2016, 16-18 March 2016, Kowloon, Hong Kong.

Alahmadi, F. and Rahman, N. A. and Yusop, Z. and Abdul Razzak, M. J. (2016) Evaluation of diversion channel capacity using flood hydrodynamic modeling. In: International Conference on Fluvial Hydraulics, RIVER FLOW 2016, 11-14 July 2016, St. Louis, United States.

Reba, M. N. M. and Roslan, N. and Syafiuddin, A. and Hashim, M. (2016) Evaluation of empirical radar rainfall model during the massive flood in Malaysia. In: 36th IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, 10 July 2016 through 15 July 2016, China.

Jiram, W. R. A. and Bujang, A. A. and Zairuslan, I. A. and Zarin, H. A. (2016) The evaluation of physical and environmental factors in low-cost housing. In: 3rd International Conference on Management and Technology in Knowledge, Service, Tourism and Hospitality, SERVE 2015, 1-2 Aug 2015, Bandung, Indonesia.

Al-Hadi, A. A. and Rahim, M. K. A. and Samsuri, N. A. (2016) Evaluation of two-to eight-element antenna array in mobile terminal. In: International Symposium on Antennas and Propagation, ISAP 2015, 9-12 Nov 2015, Hobart, Australia.

Yusof, A. R. and Udzir, N. I. and Selamat, A. (2016) An evaluation on KNN-SVM algorithm for detection and prediction of DDoS attack. In: 29th International Conference on Industrial Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2016, 2 - 4 Aug 2016, Morioka, Japan.

Sukri, M. F. and Musa, M. N. and Senawi, M. Y. and Nasution, H. (2016) Experimental investigation of an automobile air-conditioning system using integrated brushless direct current motor rotary compressor. In: 3rd International Conference on Mechanical Engineering Research, ICMER 2015, 18 August 2015 through 19 August 2015, Pahang; Malaysia.

Mohamad, A. and Mohd Zain, A. and Mohd Yusof, N. and Najarian, F. (2016) An experimental result of surface roughness machining performance in deep hole drilling. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Thailand.

Ujang, M. I. and Mat, S. and Perumal, K. and Mohd Nasir, M. N. (2016) Experimental study of UTM-LST generic half model transport aircraft. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Yusof, Y. M. and Islam, A. K. M. M. and Baharun, S. (2016) An experimental study of WSN transmission power optimisation using MICAz motes. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Bangladesh.

Jizat, N. M. and Yusoff, Z. and Rahim, S. K. A. and Sabran, M. I. and Islam, M. T. (2016) Exploitation of the electromagnetic band gap (EBG) in 3-dB multi-layer branch-line coupler. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Agboola, Oluwagbemiga Paul and Rasidi, Mohd. Hisyam and Said, Ismail and Zakka, Solomon Dyachia and Shuaibu, Abdul-Wahab (2016) Exploration of resident's social interactions in market square and its impact on community well being. In: 6th International Graduate Conference on Engineering Science and Humanities, 15-17 Aug, 2016, Universiti Teknologi Malaysia, Johor Bahru, Malaysia.

Tarmidi, Mohammad Zakri and Mohamed Shariff, Abdul Rashid and Mahmud, Ahmad Rodzi and Ibrahim, Zelina Zaiton and Hamzah, Abd. Halim (2016) Exploratory study on marine SDI implementation in Malaysia. In: IOP Conference Series: Earth and Environmental Science, 2016.

Al-Balushi, F. M. and Bahari, M. and Rahman, A. A. (2016) Exploring factors influencing implementation process of enterprise application integration (EAI): lessons from government-to-government project in Oman. In: 2nd International Conference on Communication and Information Processing, ICCIP 2016, 26 November 2016 through 29 November 2016, Singapore; Singapore.

Khoo, Zhi Yion and Ab. Rahman, Ab. Al-Hadi (2016) Exploring the design space of HEVC inverse transforms with dataflow programming. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering, 18-19 Dec, 2016, Johor Bahru, Malaysia.

Li, Z. and Sinnott, R .O. and Choon, Y. W. and Sjaugi, M. F. and Mohammad, M. S. and Deris, S. and Napis, S. and Omatu, S. and Corchado, J. M. and Ibrahim, Z. and Yusof, Z. M. (2016) Exploring the high performance computing-enablement of a suite of gene-knockout based genetic engineering applications. In: International Conference on Practical Applications of Computational Biology and Bioinformatics PACBB, 2016, 1-3 June 2016, Sevilla, Spain.

Lee, Ming Yang and Hashim, Haslenda and Liu, Wen Hui and Ho, Wai Shin (2016) Extended electric system cascade analysis (ESCA) for a carbon constraint energy generation system. In: The 8th International Conference on Applied Energy (CAE2016), 2016.

Abu Husain, M. K. and Mohd. Zaki, N. I. and Johari, M. B. and Najafian, G. (2016) Extreme response prediction for fixed offshore structures by Monte Carlo time simulation technique. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Elsiti, Nagwa Mejid and Mohd. Yusof, Noordin and Adam, Umar Alkali (2016) Fabrication of high aspect ratio micro electrode by using EDM. In: IOP Conference Series: Materials Science and Engineering, 12-14 Nov, 2015, Kuala Lumpur, Malaysia.

Nurbaya, Z. and Wahid, M. H. and Rozana, M. D. and Annuar, I. and Alrokayan, S. A. H. and Khan, H. A. and Rusop, M. (2016) Fabrication of PVDF-TrFE based bilayered PbTiO3/PVDF-TrFE films capacitor. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Azmi, S. N. C. and Rahman, S. F. A. and Hashim, A. M. (2016) Fabrication of reduced graphene oxide-gated AlGaAs/GaAs heterojunction transistor. In: 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016, 17 August 2016 through 19 August 2016, Kuala Lumpur; Malaysia.

Jumaat, N. F. and Tasir, Z. (2016) Facebook as a platform for academic-related discussion and its impact on students success. In: 4th International Conference on Information and Communication Technology, ICoICT 2016, 25 May 2016 through 27 May 2016, Indonesia.

Ali, Mohd. Fadzli and Mohd. Tahir, Lokman and Mohd. Said, Mohd. Nihra Haruzuan (2016) Facilitating learners' online discussions in completing group assignments. In: 2016 IEEE Conference on e-Learning, e-Management and e-Services, IC3E 2016, 10 Oct, 2016, Langkawi, Kedah, Malaysia.

Hashim, F. S. and Yussof, H. W. and Zahari, M. A. K. M. and Illias, R. M. and Rahman, R. A. (2016) A factorial analysis study on enzymatic hydrolysis of fiber pressed oil palm frond for bioethanol production. In: 2nd International Conference on Advances in Renewable Energy and Technologies, ICARET 2016, 23 February 2016 through 25 February 2016, Putrajaya; Malaysia.

Abdullah, A. H. and Mokhtar, M. and Kiong, J. C. C. and Ali, M. and Ibrahim, N. H. and Surif, J. (2016) Factors preventing Malaysian teachers from using Information and Communication Technology (ICT) in teaching mathematics. In: 4th International Conference on Information and Communication Technology, ICoICT 2016, 25 May 2016 through 27 May 2016, Bandung; Indonesia.

Jannati, M. and Monadi, A. and Idris, N. R. N. (2016) Fault-tolerant control of 3-phase im drive (speed-sensor fault and open-phase fault). In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Wang, Q. and Debbarma, D. and Lo, A. and Niemegeers, I. and De Groot, S. H. (2016) Feedback bit allocation for large distributed antenna systems in indoor WLAN. In: 22nd IEEE Symposium on Communications and Vehicular Technology in the Benelux, SCVT 2015, 24 Nov 2015, Luxembourg.

Md. Nordin, Syahrul Nizam and Boon, Yusof (2016) Fenomena guru bersara awal dan kesan terhadap organisasi pendidikan. In: Kolokium Pendidikan Nusantara 2016, 2016, Skudai, Johor.

Abdullah, M. and Bidin, N. and Yasin, M. (2016) Fiber optic vibration sensor using bifurcated plastic optical fiber. In: 4th International Conference on Fundamental and Applied Sciences, ICFAS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur Convention CentreKuala Lumpur; Malaysia.

Alias, N. A. and Radzi, N. H. M. (2016) Fingerprint classification using Support Vector Machine. In: 5th ICT International Student Project Conference, ICT-ISPC 2016, 27 May 2016 through 28 May 2016, Thailand.

Jalil, Mohd. Ezwan and A. Rahim, Mohamad Kamal and Samsuri, Noor Asmawati and Dewan @ Abdul Rahman, Raimi and Kamardin, Kamilia (2016) Flexible ultra-wideband antenna with incorporated metamaterial structures- multiple notches for data encoding of chipless RFID application. In: The 7th International Conference on Metamaterials, Photonic Crystals and Plasmonics, 2016, Spain.

Mohd.Sam, Abdul Rahman and Awang, Abdullah Zawawi and Ibrahim, Izni Syahrizal and Samadi, Mostafa and Tai, Kah Mon (2016) Flexural behaviour of steel fibre reinforced concrete slabs. In: Proceedings of the 11th International Civil Engineering Postgraduate Conference - The 1st International Symposium On Expertise of Engineering Design (SEPKA-ISEED'16), 2016, Skudai, Johor.

Shahrir, Nurul Syarafina and Ahmad, Norulhusna and Ahmad, Robiah and Dziyauddin, Rudzidatul Akmam (2016) Flood disaster prediction model based on artificial neural network : a case study of Kuala Kangsar Perak. In: Conference on Flood Catastrophes in a Changing Environment (CFCCE2016), 2016, Kuala Lumpur, Malaysia.

Yusoff, Y. A. and Mohamad, F. and Sunar, M. S. and Selamat, A. (2016) Flow visualization techniques: a review. In: 29th International Conference on Industrial Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2016, 2 - 4 Aug 2016, Morioka, Japan.

Kanniah, K. D. and Najib, N. E. M. and Vu, T. T. (2016) Forest cover mapping in iskandar Malaysia using satellite data. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Tajudin, M. H. M. and Tapsir, Z. and Ismail, L. H. and Saidin, S. (2016) Formation of carbonated apatite layer in 1.5× simulated body fluid at different refreshing time. In: 6th International Conference on Key Engineering Materials, ICKEM 2016, 12 - 14 March 2016, Hong Kong.

Mahadi, Nomahaza and Dhahi Al-Nusairat, Jihad Mohammad and Farzana, Quoquab Habib and Abd. Aziz, Mohd. Faiq (2016) Fostering employee pro-environmental behaviour: does emotional intelligence and Islamic work ethics matter? In: 7th International Conferenceon Postgraduate Education, 01-Dec, 2016, Shah Alam, Malaysia.

Mohd. Fua'ad, Maryam Syuhaidah and Ahmad, Mohd. Hafizi and Arief, Yanuar Zulardiansyah and Ahmad, Noor Azlinda (2016) Fractal characteristic of electrical tree grown in silicone rubber under environmental stress. In: The International Conference on Electrical, Electronic, Communication and Control Engineering (ICEECC2016), 18-19 Dec, 2016, Universiti Teknologi Malaysia, Johor.

Mohd. Nor, Shadiah Husna and Ahmad, Arshad (2016) A framework for risk-based assessment using loss functions. In: Conference on Emerging Energy and Process Technology, 07-8 Dec, 2016, Port Dickson, Negeri Sembilan, Malaysia.

Suhairom, Nornazira and Musta'amal @ Jamal, Aede Hatib and Amin @ Mohd. Amin, Nor Fadila and Ali, Dayana Farzeeha and Techanamurthy, Umawathy (2016) A framework of culinary-specific competencies for sustainable professional development in gastronomic tourism. In: 1st International Conference on Information in Business and Technology Management (I2BM) 2016, 2016, Melaka, Malaysia.

Ngadiman, Norzila and Sulaiman, Shahida (2016) A framework to guide developers in improving attractiveness and learnability of web applications. In: Joint Postgraduate Research Workshop and Software Engineering Postgraduate Workshop, 05-SEP-16, Kuala Lumpur, Malaysia.

Rahim, M. K. A. and Hamid, M. R. and Samsuri, N. A. and Murad, N. A. and Yusoff, M. F. M. and Majid, H. A. (2016) Frequency reconfigurable antenna for future wireless communication system. In: 46th European Microwave Conference, EuMC 2016, 4-6 Oct 2016, London, United Kingdom.

Razak, A. and Rahim, M. K. A. and Majid, H. A. and Murad, N. A. (2016) Frequency reconfigurable epsilon negative metamaterial antenna based on coupled electric field resonator. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Majid, H. A. and Rahim, M. K. A. and Dewan, R. and Ismail, M. F. (2016) Frequency reconfigurable square ring slot antenna. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Jamaluddin, N. and Hamzah, A. F. and Wan Ibrahim, M. H. and Jaya, R. P. and Arshad, M. F. and Abidin, N. E. Z. and Dahalan, N. H. (2016) Fresh properties and flexural strength of self-compacting concrete integrating coal bottom ash. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Endud, S. and Basir, N. M. and Lintang, H. O. (2016) Friedel–crafts acylation of anisole over heteropoly acid supported on porous montmorillonite. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Hashim, Z. and Lanyau, T. A. and Farid, M. F. A. and Kassim, M. S. and Azhar, N. S. (2016) Fundamental approaches for analysis thermal hydraulic parameter for PUSPATI Research Reactor. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Azmi, N. and Bujang, A. A. and Jiram, W. R. A. and Zarin, H. A. (2016) The fundamental of housing affordability and affordable houses: a review. In: 3rd International Conference on Management and Technology in Knowledge, Service, Tourism and Hospitality, SERVE 2015, 1-2 Aug 2015, Bandung, Indonesia.

Nazmi, N. and Shin-Ichiroh, Y. and Rahman, M. A. A. and Ahmad, S. A. and Adiputra, D. and Zamzuri, H. and Mazlan, S. A. (2016) Fuzzy logic for walking patterns based on surface electromyography signals with different membership functions. In: 2016 6th International Workshop on Computer Science and Engineering, WCSE 2016, 17-19 June 2016, Tokyo, Japan.

Zulkefli, N. A. I. and Maan, N. and Hoe, Y. S. and Zulkefli, N. A. H. (2016) Fuzzy logistic equation by polynomial interpolation. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Rawi, N. A. and Ilias, M. R. and Isa, Z. M. and Shafie, S. (2016) G-Jitter induced mixed convection flow and heat transfer of micropolar nanofluids flow over an inclined stretching sheet. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Songkhla; Thailand.

Muhamad, W. A. W. and Ngah, R. and Jamlos, M. F. and Soh, P. J. and Lago, H. (2016) Gain enhancement of microstrip grid array antenna for 5G applications. In: 2016 URSI Asia-Pacific Radio Science Conference, URSI AP-RASC 2016, 21 August 2016 through 25 August 2016, South Korea.

Suhaimi, N. H. and Suhaila, S. (2016) Generalized additive models (GAMs) approach in modeling rainfall data over Johor area. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Rusli, H. M. and Ahmad, A. and Ibrahim, S. and Puteh, M. (2016) Generating finite state machine from WSMO choreography for testing Web services. In: 10th International Conference on Digital Information Management, ICDIM 2015, 21-23 Oct 2015, South Korea.

Oktaviandri, M. and Hassan, A. and Shaharoun, A. M. (2016) Generation of look-up tables for dynamic job shop scheduling decision support tool. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

Pour, A. B. and Hashim, M. (2016) Geological features mapping using PALSAR-2 data in Kelantan river basin, peninsular Malaysia. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Rashidan, M. H. and Musliman, I. A. and Rahman, A. A. (2016) Geopackage data format for collaborative mapping of geospatial data in limited network environments. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Izzah, L. N. and Majid, Z. and Ariff, M. A. M. and Fook, C. K. (2016) Geospatial analysis of urban land use pattern analysis for hemorrhagic fever risk ' a review. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Nasorudin, N. N. and Hassan, M. I. and Zulkifli, N. A. and Rahman, A. A. (2016) Geospatial database for strata objects based on land administration domain modeL (LADM). In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Pour, A. B. and Hashim, M. (2016) Gold mineral prospecting using Phased Array type L-band Synthetic Aperture Radar (PALSAR) satellite remote sensing data, central gold belt, Malaysia. In: 23rd International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences Congress, ISPRS 2016, 12-19 July 2016, Prague, Czech Republic.

Ghoshal, S. K. and Awang, A. and Sahar, M. R. and Arifin, R. (2016) Gold nanoparticles stimulated surface plasmon resonance effects in erbium-zinc-sodium-tellurite glass. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Tugi, A. and Din, A. H. M. and Omar, K. M. and Mardi, A. S. and Soma, Z. A. M. and Omar, A. H. and Yahaya, N. A. Z. and Yazid, N. (2016) Gravity anomaly assessment using ggms and airborne gravity data towards bathymetry estimatioN. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Sarmin, N. H. and El-Sanfaz, M. A. and Omer, S. M. S. (2016) Groups and graphs in probability theory. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Ikeda, S. (2016) Growth of well-oriented VACNTs using thermal chemical vapor deposition method. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Syed Nasruddin, Sharifah Nur Farhah and Johar, Siti Norshakilah and Wan Embong, Wan Hassan (2016) Gugatan akidah: benci kepada Islam. In: Seminar Pemantapan Akidah 2015, 16 Mei 2015, Dewan Kuliah Khadijah, Fakulti Tamadun Islam, Universiti Teknologi Malaysia. Skudai, Johor.

Jaafar, N. A. and Jamaluddin, M. H. and Nasir, J. and Noor, N. M. (2016) H-shaped Dielectric Resonator Antenna for future 5G application. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Naeem, B. and Ngah, R. and Hashim, S. Z. M. (2016) Handovers in small cell based heterogeneous networks. In: 1st International Conference on Computing, Electronic and Electrical Engineering, ICE Cube 2016, 11 April 2016 through 12 April 2016, Pakistan.

Yasiran, S. S. and Salleh, S. and Mahmud, R. (2016) Haralick texture and invariant moments features for breast cancer classification. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Dharan, S. V. and Khalil-Hani, M. K. M. and Shaikh-Husin, N. S. (2016) Hardware acceleration of a face detection system on FPGA. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Mohamed, F. and Tong, S. C. C. and Tomi, B. and Mokhtar, M. K. and Yusoff, Y. A. (2016) Heart Care Augmented Reality Mobile Simulation (heARt). In: International Conference on Interactive Digital Media, ICIDM 2015, 1 December 2015 through 5 December 2015, Indonesia.

Zin, N. A. M. and Mohamad, A. Q. and Khan, I. and Shafie, S. (2016) Heat and mass transfer of unsteady MHD free convection flow of second grade fluid with Newtonian heating. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Songkhla; Thailand.

Mohamad, A. Q. and Khan, I. and Ismail, Z. and Zin, N. A. M. and Shafie, S. (2016) Heat transfer on mixed convection flow of rotating second grade fluid with ramped wall temperature. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, 10 August 2016 through 12 August 2016, Thailand.

Zainol, Z. N. and Tap, M. M. (2016) Heat transfer through fire fighter's protective clothing exposed to thermal radiation. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 - 10 Mac 2016, Kuala Lumpur, Malaysia.

Othman, N. and Noah, N. F. M. and Poh, K. W. and Yi, O. Z. (2016) High performance of chromium recovery from aqueous waste solution using mixture of palm-oil in emulsion liquid membrane. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kedah, Malaysia.

Abd. Rahman, Muhammad Faiz and Zakaria, Rozana (2016) Highway and life cycle costing as decision-making support system model. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016), 04 Oct, 2016, Johor Bahru, Malaysia.

Aripin, Muhamad Afzamiman and Ismail, Sarimah and Hamzah, Rohana and Kamin, Kamsiah (2016) Holistic approach in correctional education training module for prison's vocational instructors. In: Persidangan Kebangsaan Ketiga Pemindahan Ilmu (NCKT16), 30 Nov - 01 Dec, 2016, Pulau Pinang, Malaysia.

Mohammad, Reza Rostami and Idris, Norbik Bashah and Ismail, Zuraini (2016) A holistic botnet detection framework independent of botnet protocols and architecture. In: 1st International Conference on Advanced Information and Communication Technology, 16 May, 2016, Chittagong, Bangladesh.

Sharizan, M. S. M. and Azian, M. N. and Yoshiyuki, Y. and Kamal, A. A. M. and Yunus, M. A. C. (2016) Hot compressed water extraction curve for palm oil and beta carotene concentration. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Arriafdi, Nurfadhilah and Zainon, Othman and Din, Usmuni and Rasib, Abd. Wahid and Mat Amin, Zulkarnaini and Othman, Rusli and Mardi, Ahmad Shahlan and Mahmud, Mohd. Razali and Sulaiman, Nazam (2016) Hulu Sungai Perak bed sediment mapping using underwater acoustic sonar. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 2016, Kuala Lumpur, Malaysia.

Sjarif, N. N. A. and Shamsuddin, S. M. (2016) Human action invarianceness for human action recognition. In: 9th International Conference on Software, Knowledge, Information Management and Applications, SKIMA 2015, 15-17 Dec 2015, Kathmandu, Nepal.

Zulkifli, Z. and Shariff, A. R. M. and Tarmidi, Z. M. (2016) Human leptospirosis distribution pattern analysis in Hulu Langat, Selangor. In: International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Berjaya Times Square Hotel Kuala Lumpur; Malaysia.

Abdul Latiff, N. M. and Malik, N. N. N. A. and Idoumghar, L. (2016) Hybrid backtracking search optimization algorithm and K-means for clustering in wireless sensor networks. In: 14th IEEE International Conference on Dependable, Autonomic and Secure Computing, DASC 2016, 8 August 2016 through 10 August 2016, Auckland; New Zealand.

Piroozfard, H. and Wong, K. Y. and Asl, A. D. (2016) A hybrid harmony search algorithm for the job shop scheduling problems. In: 8th International Conference on Advanced Software Engineering and Its Applications, ASEA 2015, 25-28 Nov 2015, Jeju Island, South Korea.

Lim, W. L. and Alias, M. A. S. and Haron, H. (2016) A hybrid metaheuristic for the generalized quadratic assignment problem. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Pour, S. H. and Shahid, S. and Chung, E. S. (2016) A hybrid model for statistical downscaling of daily rainfall. In: 12th International Conference on Hydroinformatics - Smart Water for the Future, HIC 2016, 21-26 Aug 2016, Songdo ConvensiaIncheon, South Korea.

Wahid, N .S. A. and Mohamad, M. S. and Salleh, A. H. M. and Deris, S. and Chan, W. H. and Omatu, S. and Corchado, J. M. and Sjaugi, M. F. and Ibrahim, Z. and Yusof, Z. M. (2016) A hybrid of harmony search and minimization of metabolic adjustment for optimization of succinic acid production. In: International Conference on Practical Applications of Computational Biology and Bioinformatics PACBB, 2016, 1-3 June 2016, Sevilla, Spain.

Darmawan, M. F. and Yusuf, S. M. and Rozi, M. A. and Haron, H. (2016) Hybrid PSO-ANN for sex estimation based on length of left hand bone. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Muhammad, B. and Abu-Bakar, S. A. R. (2016) A hybrid skin color detection using HSV and YCgCr color space for face detection. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Izani, S. N. H. and Ali, A. (2016) Hydromagnetic mixed convection flow over an exponentially stretching sheet with fluid-particle suspension. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Tmej, M. and Dvorak, J. and Krejcar, O. and Selamat, A. and Mashinchi, R. and Kuca, K. (2016) Idea of emergency alarm as a smart mobile application with prediction. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Pour, A. B. and Hashim, M. (2016) Identification of high potential bays for habs occurrence in Peninsular Malaysia using PALSAR remote sensing data. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Dedy, A. N. and Zakuan, N. and Bahari, A. Z. and Ariff, M. S. M. and Chin, T. A. and Saman, M. Z. M. (2016) Identifying critical success factors for TQM and employee performance in Malaysian automotive industry: a literature review. In: 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2016, 19 March 2016 through 20 March 2016, Indonesia.

Samdin, S. B. and Ting, C. M. and Salleh, S. H. and Hamedi, M. and Noor, A. M. (2016) Identifying dynamic effective connectivity states in fMRI based on time-varying vector autoregressive models. In: International Conference for Innovation in Biomedical Engineering and Life Sciences, ICIBEL 2015, 6-8 Dec 2015, Putrajaya, Malaysia.

Nurullail, F. I. B. and Pahl, C. and Supriyanto, E. (2016) Image based Transesophageal Echocardiography probe tip localization. In: 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering, ICICI-BME 2015, 2-3 Nov 2015, Bandung, Indonesia.

Yahya, R. I. and Shamsuddin, S. M. and Yahya, S. I. and Hasan, S. and Al-Salibi, B. and Al-Khafaji, G. (2016) Image segmentation using membrane computing: a literature survey. In: 11th International Conference on Bio-inspired Computing – Theories and Applications, BIC-TA 2016, 28 - 30 Oct 2016, Xian, China.

Ghazali, S. and Sulaiman, N. I. S. and Zabidi, N. Z. and Omar, M. F. and Alias, R. A. (2016) The impact of knowledge sharing through social media among academia. In: 4th International Conference on Quantitative Sciences and Its Applications, ICOQSIA 2016, 16 August 2016 through 18 August 2016, Selangor; Malaysia.

Din, A. H. M. and Abazu, I. C. and Pa'Suya, M. F. and Omar, K. M. and Hamid, A. I. A. (2016) The impact of sea level rise on geodetic vertical datum of Peninsular Malaysia. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Lau, C. Y. and Gan, C. K. and Salam, Z. and Sulaima, M. F. (2016) Impact of solar photovoltaic system on transformer tap changer in low voltage distribution networks. In: Applied Energy Symposium and Submit: Renewable Energy Integration with Mini/Microgrid, REM 2016, 19 April 2016 through 21 April 2016, Maldives.

Hosseini, S. E. and Bagheri, G. and Wahid, M. A. (2016) Impacts of inlet step on the performance of a micro-combustor. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Asli, Umi Aisah and Sadikin, Aziatul Niza and Md. Kasmani, Rafiziana and Rasit Ali, Roshafima (2016) Impak program mobiliti terhadap pembangunan diri mahasiswa. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan (NASDEC 2016), 28-30 Nov, 2016, Johor Bahru, Malaysia.

Kasmin-Bajuri, N. K. B. and Alias, N. (2016) Implementation of finite difference method based on explicit and Crank-Nicolson method to the thermomechanical ice sheet model. In: 2015 International Symposium on Mathematical Sciences and Computing Research, iSMSC 2015, 19 May 2015 through 20 May 2015, Malaysia.

Facta, M. and Hermawan, Hermawan and Umiati, N. A. K. and Salam, Z. and Buntat, Z. (2016) Implementation of photovoltaic and simple resonant power converter for high frequency discharge application. In: 2nd International Conference on Information Technology, Computer, and Electrical Engineering, ICITACEE 2015, 16-18 Oct 2015, Semarang, Indonesia.

Lee, C. H. and Orikumhi, I. and Leow, C. Y. and Malek, M. A. B. and Rahman, T. A. (2016) Implementation of relay-based emergency communication system on software defined radio. In: 21st IEEE International Conference on Parallel and Distributed Systems, ICPADS 2015, 14-17 Dec 2015, Melbourne, Australia.

Ariffin, A. and Laurens, J. M. and Mansor, S. (2016) Implementation of second generation intact stability criteria into the stability calculation software. In: 3rd International Conference on Maritime Technology and Engineering, MARTECH 2016, 4-6 July 2016, Lisbon, Portugal.

Suhadi, S. M. and Mohamed, H. and Zaid, N. M. and Abdullah, Z. and Aris, B. and Sanmugam, M. (2016) Implementation of Socratic Method in online learning to enhance creative thinking: analysis review. In: 4th International Conference on Information and Communication Technology, ICoICT 2016, 25 May 2016 through 27 May 2016, Indonesia.

Salleh, Nurulliza and Zainudin, Ainur Zaireen and Md. Yunus, Norhidayah (2016) Importance of residents associations in guarded neighbourhoods: a review. In: Asset Integration International Conference 2016, 2016, Skudai, Johor.

Naderipour, A. and Zin, A. A. M. and Habibuddin, M. H. and Khokhar, S. and Kazemi, A. (2016) Improved control of shunt active power filter using harmony search algorithm. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Monemi, A. and Ooi, C. Y. and Marsono, M. N. and Palesi, M. (2016) Improved flow control for minimal fully adaptive routing in 2D mesh NoC. In: 9th International Workshop on Network on Chip Architectures, NoCArc 2016, 15 October 2016, Taiwan.

Alsofyani, I. M. and Idris, N. R. N. and Alamri, Y. A. (2016) An improved flux regulation using a controlled hysteresis toque band for DTC of induction machines. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Alik, R. and Jusoh, A. and Shukri, N. A. (2016) An improved perturb and observe checking algorithm MPPT for photovoltaic system under partial shading condition. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Talib, D. N. N. and Shafie, S. and Hamidon, M. N. and Ahmad, F. (2016) An improved readout topology of resistive sensor array for reduced measurement error. In: IEEE International Circuits and Systems Symposium, ICSyS 2015, 2 - 4 Sept 2015, Langkawi, Malaysia.

Idris, I. and Salam, M. S. (2016) Improved speech emotion classification from spectral coefficient optimization. In: International Conference on Machine Learning and Signal Processing, MALSIP 2015, 12-14 June 2015, Melaka, Malaysia.

Rahman, N. H. A. and Ali, M. T. and Islam, M. T. and Yamada, Y. (2016) Improvement of contoured beam characteristics of a parabolic reflector antenna by asymmetrically distributed array feed. In: 4th IEEE Asia-Pacific Conference on Antennas and Propagation, APCAP 2015, 30 Jun - 3 July 2015, Indonesia.

Sakina, S. H. and Johari, Z. and Auzar, Z. and Alias, N. E. and Hamzah, A. and Yusoff, M. F. M. (2016) Improving transport properties of armchair graphene nanoribbon by warping: A first principle study. In: 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016, 17 August 2016 through 19 August 2016, Kuala Lumpur; Malaysia.

Zainuddin, N. and Selamat, A. and Ibrahim, R. (2016) Improving twitter aspect-based sentiment analysis using hybrid approach. In: 8th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2016, 14 - 16 March 2016, Vietnam.

Yahaya, N. A. Z. and Musa, T. A. and Omar, K. M. and Din, A. H. M. and Abdullah, N. M. and Othman, A. H. and Wahab, M. I. A. (2016) In search of the Malaysian extended continental shelf. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Ghazali, M. and Okamura, T. and Abdullah, T. and Sunar, M. S. and Mohamed, F. and Ismail, N. (2016) In the quest of defining smart digital city in Medini Iskandar Malaysia, Iskandar Puteri, Malaysia. In: 2nd Southeast Asia Computer Human Interaction Symposium, SEACHI 2016, 7 May 2016, United States.

Yasin, R. A. M. and Jemon, K. and Nor, N. S. M. (2016) In vivo irritation study of Melastoma malabathricum cream formulation on ICR mice. In: 2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016, 13 April 2016 through 14 April 2016, Selangor; Malaysia.

Pohl, C. and Loong, C. K. (2016) In-situ data collection for oil palm tree height determination using synthetic aperture radar. In: 9th Symposium of the International Society for Digital Earth, ISDE 2015, 5 October 2015 through 9 October 2015, Canada.

Zahri, K. and Goh, P. S. and Ismail, A. F. (2016) The incorporation of graphene oxide into polysulfone mixed matrix membrane for CO2/CH4 separation. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Fauzi, M. F. and Idris, N. H. and Din, A. H. M. and Osmana, M. J. and Idris, N. H. and Ishak, M. H. I. (2016) Indigenous community tree inventory: assessment of data quality. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2016) An industrial case study application in synthesizing a feasible heat exchanger network. In: Regional Conference on Chemical Engineering 2016, 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Ubaidillah, Ubaidillah and Raharjo, W. W. and Wibowo, A. and Harjana, H. and Mazlan, S. A. (2016) Influence of additional coupling agent on the mechanical properties of polyester-Agave cantala roxb based composites. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Hamza, M. G. and Latiff, L. A. and Alfagi, A. S. (2016) Influence of ellipsoid dust Particle Size Distribution on microwave and millimeter wave frequencies. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, Bangladesh.

Cheng, S. -Y. and Mansor, S. (2016) Influence of rear-roof spoiler on the aerodynamic performance of hatchback vehicle. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Babagana, Muhammad and Boon, Yusof and Ahmad, Jamilah and Alhaji, Mustapha Grema and Mamman, Babakura (2016) Influence of school type difference on secondary school students academic performance. In: 3rd International Education Postgraduate Seminar 2016, 2016, Skudai, Johor.

Taher, Z. M. and Foster, T. and Gray, D. (2016) Influence of seed pre-soaking and oil body washing regime on the physical quality of the final suspension. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Choon, T. T. and Sim, L. C. and Connie, T. and Nita, A. K. and Uche, A. G. and Chen, G. K. (2016) Influential factors in estimating and tendering for construction work. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Ahmad, S. I. and Hashim, H. and Hassim, M. H. and Muis, Z. A. (2016) Inherent safety assessment of biodiesel production: flammability parameter. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Fili, Alireza and Songip, Ahmad Rahman (2016) Innovation management in oil tanker vessels safety. In: Proceedings ICIM 2016 Malaysia, 28-30 Nov, 2016, Kuala Lumpur, Malaysia.

Yatim, M. H. M. and Omar, A. H. and Abdullah, N. M. and Hashim, N. M. (2016) Institutional mapping towards developing a framework for sustainable marine spatial planning. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Yousefpour, A. and Ibrahim, R. and Hamed, H. N. A. and Yokoi, T. (2016) Integrated feature selection methods using metaheuristic algorithms for sentiment analysis. In: 8th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2016, 14 - 16 March 2016, Vietnam.

Shamsuddin, Siti Mazzuana and Zakaria, Rozana (2016) Integrating life cycle costing (LCC) in industrialised building system (IBS) in Malaysian construction industry. In: International Conference on Innovation in Business and Strategy (ICIBS2016), 2016, Kuala Lumpur, Malaysia.

Mahmood, A. and Yusof, Y.M. and Othman, M.F. (2016) Integrating mathematical thinking oriented problem solving approach with blended learning open source science or math studies (BLOSSOMS) modules. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Mohd, Z. H. and Ujang, U. (2016) Integrating multiple criteria evaluation and gis in ecotourism: a review. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Jamil, A. H. A. and Fathi, M. S. (2016) The integration of lean construction and sustainable construction: a stakeholder perspective in analyzing sustainable lean construction strategies in Malaysia. In: Conference on ENTERprise Information Systems / International Conference on Project MANagement / Conference on Health and Social Care Information Systems and Technologies, CENTERIS / ProjMAN / HCist 2016, 5-7 Oct 2016, Portugal.

Mohd. Yusof, Sanitah and Atan, Noor Azean and Mokhtar, Mahani and Abdul Latif, Adibah and Hassan, Zainudin (2016) Integration of moocs as blended learning in learning research methodology course. In: IUCEL 2016 The International University On e-Learning, 20-21 Sep, 2016, Johor Bahru, Malaysia.

Ibrahim, A. O. and Shamsuddin, S. M. and Saleh, A. Y. and Abdelmaboud, A. and Ali, A. (2016) Intelligent multi-objective classifier for breast cancer diagnosis based on multilayer perceptron neural network and differential evolution. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015, 7-9 Sept 2015, Khartoum, Sudan.

Jumadi, N. and Mat Noor, N. A. and Bujang, A. A. (2016) An introspective view of sustainable Cohousing with the Malaysian housing concept. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Tamimi, A. and Naidu, D. S. and Kavianpour, S. (2016) An Intrusion Detection System Based on NSGA-II algorithm. In: 4th International Conference on Cyber Security, Cyber Warfare, and Digital Forensics, CyberSec 2015, 29 October 2015 through 31 October 2015, Indonesia.

Sulaiman, N. L. and Mahrin, M. N. and Che Mohd Yusoff, R. (2016) Investigating awareness issues with Agile practices. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Bakar, N. A. A. and Selamat, H. (2016) Investigating enterprise architecture implementation in public sector organisation: a case study of Ministry of Health Malaysia. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur; Malaysia.

Jiram, W. R. A. and Bujang, A. A. and Zarin, H. A. (2016) Investigating the required competencies of valuation surveying graduates. In: 3rd International Conference on Management and Technology in Knowledge, Service, Tourism and Hospitality, SERVE 2015, 1-2 Aug 2015, Bandung, Indonesia.

Kadir, R. S. S. A. and Murat, Z. H. and Taib, M. N. and Jalil, S. Z. A. (2016) Investigation of electromagnetics radiation for stroke patients and non-stroke participants. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Alaziaza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. and Ishak, W. M. F. (2016) Investigation of light non-aqueous phase liquid migration single and double-porosity soil using light transmission visualization method (LTV). In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Yu, L. C. and Kamarudin, M. R. (2016) Investigation of patch phase array antenna orientation at 28 GHz for 5G applications. In: International Electrical Engineering Congress, iEECON 2016, 2 - 4 March 2016, Chiang Mai, Thailand.

Shafiabady, A. and Mahrin, M. N. and Samadi, M. (2016) Investigation of software maintainability prediction models. In: 18th International Conference on Advanced Communications Technology, ICACT 2016, 31 Jan - 3 Feb 2016, South Korea.

Lim, Sin Yi and Mohamad, Mohd. Saberi and Chai, Lian En and Deris, Safaai and Chan, Weng Howe and Omatu, Sigeru and Corchado, Juan Manuel and Sjaugi, Muhammad Farhan and Zainuddin, Muhammad Mahfuz and Rajamohan, Gopinathaan and Ibrahim, Zuwairie and Md. Yusof, Zulkifli (2016) Investigation of the effects of imputation methods for gene regulatory networks modelling using dynamic bayesian networks. In: 13th International Conference on Distributed Computing and Artificial Intelligence, Advances in Intelligent Systems and Computing, 1-3 Jun, 2016, Sevilla, Spain.

Alazaiza, M. Y. D. and Ngien, S. K. and Bob, M. M. and Kamaruddin, S. A. (2016) Investigation of the influence of particle size on the migration of DNAPL in unsaturated sand. In: 3rd International Conference on Civil, offshore and Environmental Engineering, ICCOEE 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Kamardin, K. and Rahim, M. K. A. and Samsuri, N. A. and Yamada, Y. and Jalil, M. E. and Idris, I. H. and Yasin, M. N. M. (2016) Investigation of transmission performance between antennas with textile Artificial Magnetic Conductor jacket on male and female subjects. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Abdullah, N. and Jizat, N. M. and Rahim, S. K. A. and Sabran, M. I. and Zaman, M. (2016) Investigation on graphene based multilayer thin film patch antenna. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Davos; Switzerland.

Yunus, N. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Aziz, S. A. A. and Khairi, M. H. A. and Wahab, N. A. A. and Shilan, S. T. (2016) Investigation on magnetic field dependent modulus of epoxidized natural rubber based magnetorheological elastomer. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Sani, M. S. H. M. and Muftah, F. and Tan, C. S. (2016) Investigation on mechanical performance of slender cold-formed steel channel column. In: International Conference on Design, Materials and Manufacturing, ICDMM 2016, 25-27 March 2016, Kuala Lumpur, Malaysia.

Dehkordi, A. B. and Abu-Bakar, S. A. R. (2016) Iris code matching using adaptive Hamming distance. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Lee, X. S. and Yan, C. P. and See, Z. S. (2016) Irregular shaped building design optimization with Building Information Modelling. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Danfulani, B. I. and Khairul, A. M. K. (2016) The isomorphic model, designing as knowledge creation. In: Proceedings of the European Conference on Knowledge Management, ECKM, 2016.

Kiat, L. B. and Dayana Abd. Halim, N. and Ibrahim, H. B. (2016) Issues and future trends in teaching physical education: a preliminary study. In: IEEE Conference on e-Learning, e-Management and e-Services, IC3e 2015, 24-26 Aug 2015, Melaka, Malaysia.

Cuervo, F. and Schönhuber, M. and Capsoni, C. and Yin, L. H. and Jong, S. L. and Din, J. B. and Martellucci, A. (2016) Ka-band propagation campaign in Malaysia - first months of operation and site diversity analysis. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Che Yaacob, Ahmad and Yusoff, Kamaruzaman and Daut, Azizah and Ismail, Normah and Mat Dom, Syed Mazlan Syed and Ismail, Noraini and Rahim, Kamal Fahrulrazy and Yahya, Khadijah and Muhamad Don, Mohd. Ali (2016) Keperluan penubuhan permodalan baitulmal kebangsaan. In: Proceedings of the International Conference on Infaq 2016 (ICI2016), 2016, Skudai, Johor.

A. Rahman, Azlina and Mohd. Zaid, Norasykin and Aris, Baharuddin and Abdullah, Zaleha and Mohamed, Hasnah (2016) Kerangka pelaksanaan pembelajaran kaedah flipped classroom berdasarkan pembelajaran berasaskan projek melalui scaffolding dengan mengambil kira gaya pembelajaran pelajar. In: Innovative Practices in Education and Industry Exhibition (I-PEINX2016), 14 Mar, 2016, Universiti Teknologi Malaysia, Johor.

Jasmi, Kamarul Azmi (2016) Keutamaan, keistimewaan dan amalan bulan Rejab dari perspektif Islam. In: Sambutan 1 Rejab 1437H, 8 April 2016, Perkarangan Surau Ehsan, Jalan Perubatan.

Mohamed, Sarajul Fikri and Mong, S. G. and Misnan, Mohd. Saidin (2016) Key characteristics of effective building maintenance and management by local authority in Malaysia. In: International Graduate Conference on Engineering, Science and Humanities, 15-17 Aug, 2016, Johor Bahru, Malaysia.

Ayob, S. F. and Sheau Ting, L. (2016) Key determinants of waste separation intention among Students on campus. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Sapri, M. and Muin, Z. A. and Sipan, I. (2016) Key drivers of an effective facilities management practice for Malaysia state mosque. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Aghili, N. and Mohammed, A. H. B. and Sheau-Ting, L. (2016) Key practice for green building management in Malaysia. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Hotel Pullman Kuala Lumpur Bangsar Wilayah Persekutuan Kuala Lumpur; Malaysia.

Samani, Mariam and Abdul Hamid, Mariani and Abd. Rashid, Siti Nor Azlina (2016) Kinetic study of solid to solvent ratio and duration of bath and probe sonication to yield and phenolic content of phaleria macrocarpa fruit extract. In: 6th International Conference on Biotechnology for the Wellness Industry, 16-17 Aug 2016, Melaka, Malaysia.

Athirah, Nadia Nordin and Mohd. Rohani, Jafri and Zainal Abidin, Norsheila and Raemy, Md. Zein (2016) Knowledge, attitude and practice of MSD injuries from Malaysian employer perspective. In: 4th Scientific Conference on Occupational Safety and Health, 14-17 Nov, 2016, Johor Bahru, Malaysia.

Nahar, Naquiah and Safar, Jimaain (2016) Kompetensi Jawi guru pendidikan Islam: memugar kelestarian seni warisan bangsa. In: International Conference on Islamic Education and Research, 05-06 Dec, 2016, Langkawi, Kedah, Malaysia.

Pheng, H. S. and Shamsuddin, S. M. and Leng, W. Y. and Alwee, R. (2016) Kullback Leibler divergence for image quantitative evaluation. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Amusuk, D. J. and Hashim, M. and Pour, A. B. (2016) Landsat-8 satellite data for geological mapping of plateau state, North Central Nigeria. In: 37th Asian Conference on Remote Sensing, ACRS 2016, 17-21 Oct 2016, Colombo, Sri Lanka.

Bibi, T. and Gul, Y. and Abdul Rahman, A. and Riaz, M. (2016) Landslide susceptibility assessment through fuzzy logic inference system (FLIS). In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Mikami, O. and Fujikawa, C. (2016) Laser diode Doppler velocimeter with 3-beams and self-mixing effect enabling 3-dimensional velocity measurement. In: Optical Sensing and Detection IV, 3-7 April 2016, Brussels, Belgium.

Romainodin, Ayuni and Ebrahim, Abouzari Lotf and El-Sayed Nasef, Mohamed Mahmoud and Ahmad, Arshad and Md. Sha'rani, Saidatul Sophia (2016) Layer by layer membrane for vanadium redox battery. In: Conference on Emerging Energy and Process Technology, 07-8 Dec, 2016, Port Dickson, Negeri Sembilan, Malaysia.

Othman, N. A. and Piah, M. A. M. and Adzis, Z. (2016) Leakage current and trapped charge characteristics for glass insulator string under contaminated conditions. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Galankashi, M. R. and Hisjam, M. and Helmi, S. A. (2016) Lean supplier selection: a data envelopment analysis (DEA) approach. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Low, K. B. and Sheikh, U. U. (2016) Learning hierarchical representation using Siamese Convolution Neural Network for human re-identification. In: 10th International Conference on Digital Information Management, ICDIM 2015, 21-23 Oct 2015, South Korea.

Ng, Khar Thoe and Zainoldin, Mohd. Faizal and Baharum, Baharulnizam and Mat Yusof, Shamsul Azha and Wong, Lai Cheng and Ahmad, Nur Jahan and Abdul Talib, Corrienna (2016) LeSMaT: a sustainable e-platform for learning science and mathematics together in the borderless world. In: Innovative Practices in Education and Industry Exhibition (I-PEINX2016), 2016, Skudai, Johor.

Sirat, R. M. and Rohani, J. M. and Shaharoun, A. M. and Haron, H. (2016) The level of safety culture beliefs and practices amongst Safety and Health Officers (SHOS) in Malaysian manufacturing companies. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Misbari, S. and Hashim, M. (2016) Light penetration ability assessment of satellite band for seagrass detection using landsat 8 OLI satellite data. In: 16th International Conference on Computational Science and Its Applications, ICCSA 2016, 4-7 July 2016, Beijing, China.

Sunderajoo, Ganeshkumar and Wong, Min Yit and Aziz, Fatin and Abdul Jalil, Rohaya (2016) Linkages of Malaysian foreign direct real estate investment and trans- pacific partnerships agreement: a literature review. In: Asset Integration International Conference, 13-14 Dec, 2016, Universiti Teknologi Malaysia, Johor.

Mansor, S. and Nogoud, Y. A. M. and Alamin, R. (2016) Longitudinal command stability augmentation system design for unstable aircraft using flying and handling qualities specifications. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015, 7-9 Sept 2015, Khartoum, Sudan.

Orabi, H. and Shaikh-Husin, N. and Sheikh, U. U. (2016) Low cost pipelined FPGA architecture of Harris Corner Detector for real-time applications. In: 10th International Conference on Digital Information Management, ICDIM 2015, 21-23 Oct 2015, South Korea.

Omairi, Amzar and Ismail, Zool Hilmi (2016) Low power wireless temperature and humidity sensing based on CM5000 node and SHT11 sensor. In: 2016 IEEE 6TH International Conference on Underwater System Technology: Theory and Applications, 13-14 Dec, 2016, Pulau Pinang, Malaysia.

Kiu, S. S. K. and Yusup, S. and Soon, C. V. and Arpin, T. and Samion, S. (2016) Lubricant enhancement via hydrodynamic and acoustic cavitation. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Sofian, H. and Muhammad, S. and Ming, J. T. C. and Noor, N. M. (2016) Lumen coronary artery border detection using texture and Chi-square classification. In: 2015 International Conference on Image and Vision Computing New Zealand, IVCNZ 2015, 23 November 2015 through 24 November 2015, New Zealand.

Hasim, N. and Rohani, M. S. and Sahar, M. R. and Ghoshal, S. K. (2016) Luminescence of Er3+/ Nd3+ co-doped lithium niobate tellurite glass. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014;, 25-27 Nov 2014, Pahang, Malaysia.

Aziz, S. M. and Hussin, R. (2016) Luminescence properties of Eu3+ and Dy3+ doped magnesium tellurite borophosphate glass. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Zakaria, M. I. and Husain, A. R. and Mohamed, Z. and El Fezazi, N. and Shah, M. B. N. (2016) Lyapunov-Krasovskii stability condition for system with bounded delay - An application to steer-by-wire system. In: 5th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2015, 27 November 2015 through 29 November 2015, Penang; Malaysia.

Isa, S. M. and Ali, A. and Shafie, S. (2016) Magnetohydrodynamic flow of dusty fluid past a vertical stretching sheet with Hall effect. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Ubaidillah, Ubaidillah and Permata, A. N. S. and Wibowo, A. and Budiana, E. P. and Yahya, I. and Mazlan, S. A. (2016) Magnetostatic simulation on a novel design of axially multi-coiled magnetorheological brakes. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Liew, C. L. and Talib, A. R. A. and Jacobs, R. L. (2016) Malaysian aviation technologist promotion to managerial role: an empirical overview. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Mohamad @ Asmara, Ahmad Alham and Francis Nordin, Norlisa and Mohd. Yusof, Nor Fasiha (2016) Male and female designers cognitive pattern based on linkography approach. In: The First Multidisciplinary Conference on Mechanical Engineering, MCME, 2016, Skudai, Johor.

Akbarizan, Akbarizan and Lestari, F. and Ismail, K. and Hamid, A. B. A. and Azwar, B. and Nazar, H. (2016) Managing halal foods through power collaboration between supply chain actors. In: 27th International Business Information Management Association Conference - Innovation Management and Education Excellence Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2016, 4-5 May 2016, Milan, Italy.

Yusoff, H. H. M. and Razak, K. A. and Yuen, F. and Harun, A. and Talib, J. and Mohamad, Z. and Ramli, Z. and Razab, R. A. (2016) Mapping of post-event earthquake induced landslides in Sg. Mesilou using LiDAR. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Hashim, M. and Misbari, S. and Reba, N. M. and Abdul-Wahab, M. F. and Pour, A. B. and Said, M. F. M. and Omar, A. H. and Soeed, K. (2016) Mapping snow-algae in Antarctic Peninsula with multi-temporal satellite remote sensing data. In: 36th IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, 10 July 2016 through 15 July 2016, China.

Yazid, N. M. and Din, A. H. M. and Omar, K. M. and Som, Z. A. M. and Omar, A. H. and Yahaya, N. A. Z. and Tugi, A. (2016) Marine geoid undulation assessment over south China sea using global geopotential models and airborne gravity data. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Ufere, K. J. and Alias, B. and Uche, A. G. (2016) Market motivations for voluntary carbon disclosure in real estate industry. In: 4th International Conference on Geological, Geographical, Aerospace and Earth Science 2016, 4 June 2016 through 5 June 2016, Indonesia.

Abdul Majid, Zaiton and Danial, Wan Hazman and Bakar, Mohd. Bakri (2016) Marriage of graphene and cellulose for reinforced composite preparation. In: Graphene Malaysia 2016, 2016, Kuala Lumpur, Malaysia.

Yahaya, N. A. Z. and Musa, T. A. and Omar, K. M. and Din, A. H. M. and Omar, A. H. and Tugi, A. and Yazid, N. M. and Abdullah, N. M. and Wahab, M. I. A. (2016) Mean sea surface (MSS) model determination for Malaysian seas using multi-mission satellite altimeter. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Al-Nuaimi, I. T.I . and Mahmood, A. K. B. and Mustapha, E. E. and Jebur, H. H. (2016) Measurement model of e-SQ dimensions and users' satisfaction in Malaysia IHL. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur Convention Centre Kuala Lumpur; Malaysia.

Tengku Mohd, T. A. and Jaafar, M. Z. and Ali Rasol, A. A. and Hamid, M. F. (2016) Measurement of streaming potential in downhole application: an insight for enhanced oil recovery monitoring. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Sarawak; Malaysia.

Isa, M. and Bakar, M. A. and Sipan, I. and Hasim, M. S. and Hashim, A. E. and Jalil, M. K. A. (2016) Measuring instrument constructs of return factors for green office building investments variables using rasch measurement model. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Hemdi, A. R. and Mahmood, S. and Mat Saman, M. Z. and Sharif, S. (2016) Measuring product sustainability using fuzzy method. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Sudiro, S. and Yusof, S. M. (2016) Measuring production floor performance using systematic approach: a case study of hospital beds production. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Jasmi, Kamarul Azmi (2016) Memperkasakan penulisan bab dalam buku dengan standard penulisan akademik bidang Pendidikan dan Pengajian Islam. In: Bengkel Penulisan Artikel Bab dalam Buku, 5hb April 2016, Makmal Komputer, Fakulti Tamadun Islam, Universiti Teknologi Malaysia.

Ariff, N. I. and Tasir, Z. (2016) Meta-analysis of content analysis models for analysing online problem solving discussion. In: IEEE Conference on e-Learning, e-Management and e-Services, IC3e 2015, 24-26 Aug 2015, Melaka, Malaysia.

Wen, A. S. and Zaid, N. M. and Harun, J. (2016) A Meta-Analysis on Students' Social Collaborative Knowledge Construction using Flipped Classroom Model. In: 2015 IEEE Conference on e-Learning, e-Management and e-Services, IC3e 2015, 24 - 26 Aug 2015, Melaka, Malaysia.

Hashim, Z. and Fukusaki, E. (2016) Metabolomics-based prediction models of yeast strains for screening of metabolites contributing to ethanol stress tolerance. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Eteng, A. A. and Abdul Rahim, S. K. and Chee Yen, L. and Elobaid, H. A. E. (2016) Method to reduce distance-sensitivity within an operating range in HF-RFID WPT links. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Marsid, Ezzah Atikah and Sugiura, Norio and Zakaria, Zuriati and Othman, Nor'azizi and Utsumi, Motoo and Iwamoto, Koji and Goto, Masafumi and Hara, Hirofumi (2016) Microbial diversity and cyanobacteria species in disturbed and undisturbed peat swamp fores. In: Malaysia Japan Joint International Conference 2016, 2016, Kuala Lumpur, Malaysia.

Apsari, R. and Pratomo, D. A. and Hikmawati, D. and Bidin, N. (2016) Microstructure and mechanical changes induced by Q-Switched pulse laser on human enamel with aim of caries prevention. In: 5th International Conference and Workshop on Basic and Applied Sciences, ICOWOBAS 2015, 16-17 Oct 2015, Surabaya, Indonesia.

Tafti, Atefeh Ayatollahi and Idris, Jamaliah (2016) Microwave assisted hydroxyapatite deposition coating on AZ31 magnesium alloy. In: Fourth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM, 2016, United Kingdom.

Rahim, H. M. and Leow, C. Y. and Rahman, T. A. (2016) Millimeter wave propagation through foliage: comparison of models. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Izani, S. N. H. and Ali, A. (2016) Mixed convective boundary layer flow of a dusty Jeffrey fluid over an exponentially stretching sheet. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, 10 August 2016 through 12 August 2016, Thailand.

Jin, C. M. and Omar, Z. and Jaward, M. H. (2016) A mobile application of American sign language translation via image processing algorithms. In: 2016 IEEE Region 10 Symposium, TENSYMP 2016, 9 May 2016 through 11 May 2016, Indonesia.

Yang, X. and Borse, R. and Satvat, N. (2016) Mocum code verification and sensibility study using C5G7 benchmark. In: 2016 24th International Conference on Nuclear Engineering, ICONE 2016, 26 - 30 June 2016, Charlotte, United States.

Yang, X. and Borse, R. and Satvat, N. (2016) Mocum code verification and sensibility study using C5G7 benchmark. In: 2016 24th International Conference on Nuclear Engineering, ICONE 2016, 26 - 30 June 2016, Charlotte, United States.

Abd. Hamid, Suhana and Mohamad, Ahmad Marzuki and Azahar, Zairus Norsiah and Elias, Zety Azlin and Mohd. Zain, Siti Khadijah (2016) Model kepimpinan syura menurut al Quran dan al Sunnah yang mendominasi kepimpinan organisasi pendidikan. In: International Conference on Islamic Education and Research (ICER2006), 05-06 Dec, 2016, Langkawi, Kedah, Malaysia.

Khairuddin, Nurul Atasha and Kamardin, Kamilia (2016) Model of sentiment analysis for social media data. In: Postgraduate Annual Research on Informatics Seminar (PARIS 2016), 26-27 Oct 2016, Kuala Lumpur, Malaysia.

Mohd. Noor, Norhayati and Mohd. Mahdzir, Akbariah (2016) Model pengekalan perhubungan perkahwinan pasangan suami isteri di Malaysia. In: 4th Asean Comparative Education Research Network Conference, 2016, Indonesia.

Huang, W. and Samin, P. M. and Tawi, K. B. (2016) Model reference control of conceptual clutched train substituted for vehicular friction clutch. In: 3rd International Conference on Mechanical Engineering Research, ICMER 2015, 18 August 2015 through 19 August 2015, Pahang; Malaysia.

Khair, F. and Fakhriy, H. P. and Mustika, I. W. and Setiyanto, B. and Idrus, S. M. (2016) Modeling and simulation of OFDM scheme for radio over fiber (RoF). In: 2nd International Conference on Information Technology, Computer, and Electrical Engineering, ICITACEE 2015, 16-18 Oct 2015, Semarang, Indonesia.

Rahmasari, L. and Zain, A. R. M. and Hashim, A. M. (2016) Modeling of Si/Ge based two-dimensional photonic crystal nanocavity. In: 2nd International Seminar on Photonics, Optics, and Its Applications, ISPhOA 2016, 24-25 Aug 2016, Bali, Indonesia.

Bhayo, M. A. and Yatim, A. H. M. and Khokhar, S. and Aziz, M. J. A. and Idris, N. R. N. (2016) Modeling of Wind Turbine Simulator for analysis of the wind energy conversion system using MATLAB/Simulink. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Wan Mohamad, W. M. and Ahmad, T. and Ashaari, A. (2016) Modeling steam generator system of pressurized water reactor using fuzzy arithmetic. In: 2nd International Conference on Soft Computing in Data Science, SCDS 2016, 21 - 22 Sept 2016, Kuala Lumpur, Malaysia.

Mustafa, S. and Bahar, A. and Aziz, Z. A. and Suratman, S. (2016) Modeling water chemistry change and contaminant transport in riverbank filtration systems. In: 2nd International Conference on Mathematical Sciences and Statistics: Innovations Through Mathematical and Statistical Research, ICMSS 2016, 26 January 2016 through 28 January 2016, Kuala Lumpur; Malaysia.

Aamir, M. and Shabri, A. (2016) Modelling and forecasting monthly crude oil price of Pakistan: a comparative study of ARIMA, GARCH and ARIMA Kalman model. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Muhammad, Aamir and Shabri, Ani (2016) Modelling and forecasting monthly crude oil prices of Pakistan: a comparative study of ARIMA, GARCH and ARIMA Kalman model. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 - 26 November 2015, Johor Bahru, Johor, Malaysia.

Banitalebi, A. and Aziz, M. I. A. and Aziz, Z. A. and Nasir, N. (2016) Modelling and optimization for palm oil plantation management. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Hoflin, V. and Soesanto, A. M. and Andriantoro, H. and Suriyanto, E. and Haueisen, J. (2016) Modelling and simulation of blood circulation towards mitral valve replacement risk calculation. In: 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering, ICICI-BME 2015, 2-3 Nov 2015, Bandung, Indonesia.

Amer, N. H. and Zamzuri, H. and Hudha, K. and Aparow, V. R. and Kadir, Z. A. and Abidin, A. F. Z. (2016) Modelling and trajectory following of an armoured vehicle. In: 2nd SICE International Symposium on Control Systems, ISCS 2016, 7 March 2016 through 10 March 2016, Japan.

Bununu, Yakubu Aliyu and Muhamad Ludin, Ahmad Nazri and Hosni, Nafisa (2016) Modelling vegetationloss and greenhouse gas emissions in Kaduna, Nigeria. In: 10th SEATUC Symposium in Shibaura Institute of Technology, 2016, Tokyo.

Lazim, N. H. M. and Rahman, H. A. and Bahar, A. (2016) Modification of two-step method in estimating the parameters of stochastic differential equation models. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Astaraki, M. and Aslian, H. and Hamedi, M. (2016) A modified fast local region based method for image segmentation. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Hou, Kit Mun and Kok, Yeow Hou and Dimon, Mohamad Ngasri (2016) Moisture content detection based on transmission power measurement using a microstrip wide-ring sensor. In: International Conference on Manufacturing Science and Engineering (ICMSE 2015), 2015, China.

Wong, K. J. and Gong, X. J. and Aivazzadeh, S. and Tamin, M. N. (2016) Moisture effects on patch bonded composite repairs. In: International Conference on Materials Engineering and Nanotechnology, ICMEN 2016, 21 - 23 May 2016, Taipei, Taiwan.

Shafie, S. and Gul, A. and Khan, I. (2016) Molybdenum disulfide nanoparticles suspended in water-based nanofluids with mixed convection and flow inside a channel filled with saturated porous medium. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, 10 August 2016 through 12 August 2016, Thailand.

Pohl, C. and Kanniah, K. D. and Loong, C. K. (2016) Monitoring oil palm plantations in Malaysia. In: 36th IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, 10 July 2016 through 15 July 2016, China.

Koto, J. and Siow, C. L. and Guedes Soares, C. and Yasukawa, H. and Matsuda, A. and Terada, D. and Abyn, H. (2016) Motion response of round shape FLNG due to interaction with another floating structure. In: 3rd International Conference on Maritime Technology and Engineering, MARTECH 2016, 4-6 July 2016, Lisbon, Portugal.

Hamedi, M. and Salleh, S. H. and Samdin, S. B. and Noor, A. M. (2016) Motor imagery brain functional connectivity analysis via coherence. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Hamed, H. N. A. and Saleh, A. Y. and Shamsuddin, S. M. and Ibrahim, A. O. (2016) Multi-objective K-means evolving spiking neural network model based on differential evolution. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015, 7-9 Sept 2015, Khartoum, Sudan.

Kanniah, Kasturi Devi (2016) Multi-sensor satellite data for carbon storage mapping of green space in a fast growing development corridor in Malaysia. In: 37th Asian Conference on Remote Sensing, ACRS 2016, 17-21 Oct 2016, Sri Lanka.

Dewan, R. and Rahim, M. K. A. and Hamid, M. R. and Majid, H. A. (2016) Multiband reconfigurable antenna using EBG unit cells. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Majed, A. and Salam, Z. (2016) Multilevel D-STATCOM for sag and swell mitigation using modulation index control. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Rhani, N. A. and Ali, N. M. M. and Sarmin, N. H. and Erfanian, A. and Hamid, M. A. (2016) Multiplicative degree of some dihedral groups. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Ismail, A. R. and Wan Sulaiman, W. R. and Jaafar, M. Z. and Ismail, I. and Sabu Hera, E. (2016) Nanoparticles performance as fluid loss additives in water based drilling fluids. In: 4th International Conference on Nano and Materials Engineering, ICNME 2016, 7-8 April 2016, Bali Island, Indonesia.

Hamza, U. D. and Nasri, N. S. and Mohammed, J. and Majid, Z. A. (2016) Natural gas adsorption on biomass derived activated carbons: A mini review. In: 3rd International Conference on Chemical and Biological Sciences, ICCBS 2016, 23 March 2016 through 25 March 2016, Netherlands.

D. Hamza, Usman and Nasri, Noor Shawal and Muhammad, Jibril and Abdul Majid, Zulkifli (2016) Natural gas adsorption on sustainable biomass derived activated carbon: a mini-review. In: 3rd International Conference on Chemical and Biological Sciences, 23-25 Mar, 2016, Amsterdam. Netherlands.

Ismail, R. and Rahim, H. A. (2016) Near Infrared Spectroscopy (NIRs) applications in medical: Non-invasive and invasive leukemia screening. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Alnour, I. A. and Wagiran, H. and Ibrahim, N. and Hamzah, S. and Siong, W. B. and Elias, M. S. (2016) New approach to calculate the true-coincidence effect of HpGe detector. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Mohamad, M. and Selamat, A. (2016) A new hybrid rough set and soft set parameter reduction method for spam e-mail classification task. In: 14th International Workshop on Knowledge Management and Acquisition for Intelligent Systems, PKAW2016, 22-23 Aug 2016, Phuket, Thailand.

Ismai, Z. and Abu, N. and Sufahani, S. (2016) New product forecasting with limited or no data. In: 4th International Conference on Quantitative Sciences and Its Applications, ICOQSIA 2016, 16 August 2016 through 18 August 2016, Selangor; Malaysia.

Dehkordi, A. B. and Abu-Bakar, S. A. R. (2016) Noise reduction for iris recognition using adaptive fuzzy filtering. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Chin, H. C. and Tan, M. L. P. (2016) Non-ballistic Modeling Transport of Phonon Scattering in Carbon Nanotube and Silicon Nanowire Field-Effect Transistors. In: 17th UKSim-AMSS International Conference on Computer Modelling and Simulation, UKSim 2015, 25 March 2015 through 27 March 2015, United Kingdom.

Jamali, A. and Mat Darus, I. Z. and Abdulhussain, A. and Tokhi, M. O. (2016) Non-parametric modeling of double-link flexible robot manipulator based on NNARX model structure. In: 19th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2016;, 12-14 Sept 2016, London, United Kingdom.

Surakusumah, R. F. and Rizqie, M. Q. and Hidayat, D. H. P. and Supriyanto, E. and Satria, M. H. (2016) A novel design of needle aspiration biopsy monitoring instrument (NAOMI) tested on a low cost chest phantom. In: 2016 International Conference on Frontiers of Sensors Technologies, ICFST 2016, 12 March 2016 through 14 March 2016, Hong Kong.

Mansoor, Nafees and Muzahidul Islam, A. K. M. and Zareei, Mahdi and Baharun, Sabariah and Komaki, Shozo (2016) A novel on-demand routing protocol for cluster-based cognitive radio ad-hoc networkaware cognitive radio based hospital. In: IEEE Region 10 Conference, 2016 (IEEE TENCON 2016) Biology Society (EMBC), 2016, Singapore.

Liu, Z. and Chang, W. and Sheng, S. and Li, L. and Soo, Y. G. and Yeong, C. F. and Odagaki, M. and Duan, F. (2016) A novel upper limb training system based on UR5 using sEMG and IMU sensors. In: 2016 IEEE International Conference on Robotics and Biomimetics, ROBIO 2016, 3-7 Dec 2016, Qingdao, China.

Mohd. Yusof, Khairunnisa and Ngajikin, Nor Hafizah and Che Abd. Rashid, Nurfatihah (2016) NPK detection using LED based spectroscopy on soil. In: The 9th Regional Conferenceon Electrical and Electronics Engineering RCEEE 2016, 2016, China.

Razali, Mohamad Nor Hafidz Arif and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Arai, Norio (2016) A numerical analysis of wind flow within and above idealised modified terraced house canyon in Malaysia. In: 4th International Conference on Countermeasures to Urban Heat Island (UHI) 2016, 2016, Singapore.

Jiann, L. Y. and Ismail, Z. and Shafie, S. and Fitt, A. (2016) Numerical computational offluid flow through a sclera buckling. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Isa, S. N. A. B. and Aris, N. and Puzi, S. M. (2016) Numerical matrix methods in the computation of the greatest common divisor (GCD) of polynomials. In: 2nd International Conference on Mathematics, Engineering and Industrial Applications 2016, ICOMEIA 2016, 10 August 2016 through 12 August 2016, Thailand.

Yusof, Z. and Rasid, Z. A. (2016) Numerical modelling of parametric instability problem for composite plate using finite element method. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Nunoo, S. and Ngah, R. and Chude-Okonkwo, U. A. K. and Elijah, O. and Orikumhi, I. and Leow, C. Y. (2016) On the sparsity-aware partial-update NLMS algorithms for UWB channel estimation. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Lee, T. S. and Ariff, M. S. M. and Zakuan, N. and Sulaiman, Z. and Saman, M. Z. M. (2016) Online sellers' website quality influencing online buyers' purchase intention. In: 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2016, 19 March 2016 through 20 March 2016, Indonesia.

Lam, J. and Noor, Y. A. and Supriyanto, E. (2016) Ontology driven knowledge base for high risk pregnancy management. In: 4th International Conference on Instrumentation, Communications, Information Technology and Biomedical Engineering, ICICI-BME 2015, 2-3 Nov 2015, Bandung, Indonesia.

Khalid, N. F. and Din, A. H. M. and Omar, K. M. and Khanan, M. F. A. and Omar, A. H. and Hamid, A. I. A. and Pa'Suya, M. F. (2016) Open-source digital elevation model (DEMs) evaluation with gps and lidar data. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Ayat, S. O. and Khalil Hani, M. and Bakhteri, R. (2016) OpenCL-based hardware-software co-design methodology for image processing implementation on heterogeneous FPGA platform. In: 5th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2015, 27 November 2015 through 29 November 2015, Penang; Malaysia.

Liau, Q. Y. and Leow, C. Y. (2016) Opportunistic relays selection for successive relaying with inter-relay interference. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Mohamed, Habibah and Hussin, Nabihah and Ahmad, Fauzan and Ambran, Sumiaty and Wadi Harun, Sulaiman (2016) Optical based relative humidity sensor using tapered optical fiber coated with graphene oxide. In: AIP Conference Proceedings, 2016.

Yaacob, Y. and Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. (2016) Optical coupling for multi-layered optical printed wiring board using micro lens array. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Neo, Y. S. and Idrus, S. M. and Rahmat, M. F. and Kanno, A. (2016) Optical feedforward linearization system for directly modulated laser transmitter (OFFLS-DMLT). In: 6th IEEE International Conference on Communications and Electronics, IEEE ICCE 2016, 27 July 2016 through 29 July 2016, Vietnam.

Liu, Wen Hui and Wan Alwi, Sharifah Rafidah and Hashim, Haslenda and Ab Muis, Zarina (2016) Optimal design and sizing of integrated centralized and decentralized energy systems. In: 8th International Conference on Applied Energy (ICAE2016), 08-11 Oct, 2016, Beijing, China.

Rahman, H. A. and Nordin, N. D. (2016) Optimal sizing of decentralized photovoltaic generation and energy storage units for Malaysia residential household using iterative method. In: 2016 3rd International Conference on Manufacturing and Industrial Technologies, ICMIT 2016, 25 May 2016 through 27 May 2016, Turkey.

Kamaruzaman, A. F. and Mohd Zain, A. and Mohd Yusof, N. and Nadjarian, F. (2016) Optimization of machining parameters for minimization of roundness error in deep hole drilling using minimum quantity lubricant. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Thailand.

Kamaruzaman, Anis Farhan and Mohd. Zain, Azlan and Mohd. Yusof, Noordin and Najarian, Farhad (2016) Optimization of machining parameters for minimization of roundness error in deep hole drilling using minimum quantity lubricant. In: MATEC Web Of Conferences, 01-02 May, 2016, Phuket, Thailand.

Malek, R. A. and Malek, M. K. and Othman, N. Z. and Ramli, S. and Aziz, R. and El Enshasy, H. A. (2016) Optimization of production medium for high cell mass production and the functional characteristics study of bifidobacterium longum WICC B34. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Aziz, A. H. A. and Yunus, M. A. C. and Arsad, N. H. and Lee, N. Y. and Idham, Z. and Razak, A. Q. A. (2016) Optimization of supercritical carbon dioxide extraction of piper betel linn leaves oil and total phenolic content. In: 2nd International Conference on Chemical Engineering, ICCE 2016, 26 October 2016 through 27 October 2016, Indonesia.

Fauzi, N. F. and Ali, M. T. and Rahman, N. H. A. and Yamada, Y. (2016) Optimized parabolic reflector antenna for Malaysia beam coverage. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Sanni, M. L. and Hashim, A. H. A. and Hassan, W. H. and Anwar, F. and Ahmed, G. S. M. (2016) Optimized routing algorithm for mobile multicast source in wireless mesh networks. In: 11th International Conference on Innovations in Information Technology, IIT 2015, 1-3 Nov 2015, Dubai, United Arab Emirates.

Van Der Heiden, P. and Pohl, C. (2016) Organizational barriers to absorptive capacity building for international technology transfer to Malaysia. In: 36th IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, 10 July 2016 through 15 July 2016, China.

Leong, S. A. N. and Mazlan, S. A. and Mohamad, N. and Aziz, S. A. A. and Ubaidillah, Ubaidillah (2016) An overview of nanoparticles utilization in magnetorheological materials. In: 6th Nanoscience and Nanotechnology Symposium, NNS 2015, 4-5 Nov 2015, Sunan HotelSurakarta, Indonesia.

Abubakar, I. and Khalid, S. N. and Mustafa, M. W. and Shareef, H. and Mustapha, M. (2016) An overview of Nonintrusive load monitoring methodologies. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Mohtar, Aminullah and Wai, Shin Ho and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Peng, Yen Liew (2016) Palm oil mill effluent (POME) biogas off-site utilization Malaysia specification and legislation. In: 2nd International Conference of Low Carbon Asia (ICLCA2016), 23 Nov, 2016.

Pour, A. B. and Hashim, M. (2016) PALSAR-2 remote sensing data for detection of hazards zones of geological origin in Kelantan river basin, Peninsular Malaysia. In: IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, 10 July 2016 through 15 July 2016, China.

Al-Areqi, N. N. and Seman, N. and Rahman, T. A. (2016) Parallel-coupled line bandpass filter design using different substrates for fifth generation wireless communication applications. In: International Symposium on Antennas and Propagation, ISAP 2015, 9-12 Nov 2015, Hobart, Australia.

Arief, Yanuar Zulardiansyah and Ahmad, Mohd. Hafizi and Muhamad, Nor Asiah and Kurnianto, Rudi and Awang, Noor 'Aliaa and Patsch, Rainer (2016) Partial discharge characteristics of low-density polyethylene and effect of nanofiller using pulse sequence analysis. In: 10th South East Asian Technical University Consortium Symposium (SEATUC 2016), 22-24 Feb, 2016, Japan.

Aulia, A. and Arief, Y. Z. and Abdul-Malek, Z. and Muhamad, N. A. and Ahmad, M. H. and Makmud, M. Z. H. (2016) Partial discharge monitoring technique for research purpose on solid insulating material. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Ariffin, W. N. M. and Salleh, S. (2016) The partitioning technique of directed cyclic graph for task assignment problem. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Al-Samman, A. M. and Rahman, T. A. and Azmi, M. H. and Zulkefly, N. R. and Mataria, A. M. S. (2016) Path loss model for outdoor environment at 17 GHz mm-wave band. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Hatten Hotel Melaka Hatten Square, Jalan Merdeka, Bandar Hilir Melaka; Malaysia.

Ullah, F. and Abdullah, A. H. and Kaiwartya, O. and Prakash, S. (2016) Patient data dissemination in wireless body area network: a qualitative analysis. In: 2nd International Conference on Information and Communication Technology for Competitive Strategies, ICTCS 2016, 4 - 5 March 2016, Udaipur, India.

Mohamad, Ahmad Marzuki and Wan Embong, Wan Hassan and Safar, Jimaain and Kamarul, Azmi Jasni and Mohamed, Ahmad Kilani (2016) Pelaksanaan atribut perkongsian kepimpinan dalam konsep profesional learning community di sekolah menengah kebangsaan agama. In: International Conference on Islamic Education & Research, 05 Dec, 2016, Langkawi, Kedah, Malaysia.

Zainon, Othman and Nik Mahmood, Nik Hasnaa and Masrom, Maslin and Wan Zakaria, Wan Normeza and Rasheed, Mohamed Kutty and Mohd. Ali, Nor Raihana and Amerudin, Shahabuddin and Hashim, Mohamad Ghazali and Jamil, Rossilah and Bakar, Al Azmi and Abd. Khalid, Nurul Hidayah and Zulkeefly, Dana and Khor, Siew Yee and Noor Azmy, Suzanna and Amyra, Nabila Yusof and Loh, Siew Lik (2016) Pemetaan hubungan jarak perjalanan pesalah juvana dan lokasi kejadian jenayah menggunakan sistem maklumat geografi. In: International Conference on Social Innovation 16', 22-23 Nov, 2016, Kuala Lumpur, Malaysia.

Jasmi, Kamarul Azmi (2016) Pendidikan sebagai medium penerapan Islam dalam sains dan teknologi. In: Persidangan Islam dalam Sains dan Teknologi 2016 (PIST’16), 13-15 Oktober 2016, Dewan Senat, Universiti Teknologi Malaysia, Skudai Johor. (Unpublished)

Jasmi, Kamarul Azmi (2016) Penghasilan buku penyelidikan daripada tesis Pengajian Islam dan Pendidikan Islam. In: Bengkel Penulisan dan Penerbitan Akademik, 29hb Ogos 2016, Bilik Mesyuarat, Fakulti Tamadun Islam, Kampus Kuala Lumpur City, Universiti Teknologi Malaysia.

Ali @ Awang, Sumayyah and Abdullah, Abdul Hafiz (2016) Penulisan ilmiah berkaitan ilmu qiraat di Malaysia: suatu tinjauan awal. In: 3rd International Conference on Arabic Studies & Islamic Civilization, 14-MAR-16, Kuala Lumpur, Malaysia.

Ismail, H. and Yusof, Z. M. (2016) Perceptions towards non-value-adding activities during the construction process. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Ubaidillah, Ubaidillah and Harjana, Harjana and Yahya, I. and Kristiani, R. and Muqowi, E. and Mazlan, S. A. (2016) Perfect sound insulation property of reclaimed waste tire rubber. In: 4th International Conference and Exhibition on Sustainable Energy and Advanced Materials 2015, ICE-SEAM 2015, 11 - 12 Nov 2015, Solo, Indonesia.

Ibrahim, A. and Rahim, S. K. A. and Mohamad, H. (2016) Performance evaluation of RSS-based WSN indoor localization scheme using artificial neural network schemes. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Ming, J. T. C. and Noor, N. M. and Rue, N. C. and Rijal, O. M. and Kassim, R. M. and Yunus, A. (2016) Performance evaluation system for automated lung segmentation system using HRCT thorax images. In: IEEE Student Symposium in Biomedical Engineering and Sciences, ISSBES 2015, 4 Nov 2015, Selangor, Malaysia.

Dahri, M. H. and Kamarudin, M. R. and Jamaluddin, M. H. and Selvaraju, R. R. (2016) Performance investigation of reflectarray resonant elements for 5G communications. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Leong, S. A. N. and Mazlan, S. A. and Samin, P. M. and Idris, A. and Ubaidillah, Ubaidillah (2016) Performance of bidisperse magnetorheological fluids utilizing superparamagnetic maghemite nanoparticles. In: 6th Nanoscience and Nanotechnology Symposium, NNS 2015, 4-5 Nov 2015, Sunan HotelSurakarta, Indonesia.

Maziar, Reza and Kasni, Sumeru and Senawi, Mohd. Yusoff and Ani, Farid Nasir (2016) Performance of ejector refrigeration cycle for automotive air conditioning. In: Applied Mechanics and Materials, 2015.

Faris, M. A. and Abdullah, M. M. A. B. and Ismail, K. N. and Muniandy, R. and Jaya, R. P. (2016) Performance of straight steel fibres reinforced alkali activated concrete. In: 2016 International Conference on Innovative Research, ICIR 2016, 19 May 2016 through 20 May 2016, Romania.

Hamzah, A. and Ismail, R. (2016) Performance prediction of graphene nanoscroll and carbon nanotube transistors. In: 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016, 17 August 2016 through 19 August 2016, Kuala Lumpur; Malaysia.

Lintang, H. O. and Roslan, N. A. and Ramlan, N. and Shamsuddin, M. and Yuliati, L. (2016) Photocatalyst composites of luminescent trinuclear copper(I) pyrazolate complexes/titanium oxide for degradation of 2,4-dichlorophenoxyacetic acid. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Shu, Chin Lee and Hasan, Norhasnita and Lintang, Hendrik O. and Shamsuddin, Mustaffa and Yuliati, Leny (2016) Photocatalytic removal of 2,4-dichlorophenoxyacetic acid herbicide on copper oxide/titanium dioxide prepared by co-precipitation method. In: 10th Joint Conference on Chemistry, 8-9 Sept 2015, Solo, Indonesia.

Abu Samah, Khamisah and Sahar, Muhammad Rahim and Yusop, Masleeyati (2016) Physical and electrical properties of cullet-paper ash-kaolin clay ceramic. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov, 2014, Cameron Highlands, Pahang, Malaysia.

Samah, K. A. and Sahar, M. R. and Yusop, M. (2016) Physical and electrical properties of cullet-paper ash-kaolin clay ceramic. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Liau, Q. Y. and Leow, C. Y. (2016) Physical layer security in two-path successive relaying. In: 20th IEEE International Workshop on Computer Aided Modelling and Design of Communication Links and Networks, CAMAD 2015, 7-9 Sept 2015, Guildford, United Kingdom.

Yusof, N. F. M. and Bashir, N. and Muhamad, N. A. (2016) Polarization and depolarization current study in polymeric insulation containing voids. In: 5th IEEE International Conference on High Voltage Engineering and Application, ICHVE 2016, 19 September 2016 through 22 September 2016, China.

Marek, T. and Krejcar, O. and Selamat, A. (2016) Possibilities for development and use of 3D applications on the android platform. In: 8th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2016, 14 - 16 March 2016, Da Nang, Vietnam.

Kamal, S. and Ibrahim, R. and Ghani, I. (2016) Post-search ambiguous query classification method based on contextual and temporal information. In: 8th Asian Conference on Intelligent Information and Database Systems, ACIIDS 2016, 14-16 March 2016, Da Nang, Vietnam.

Shahidan, Shahiron and Aminudin, Eeydzah and Khairiyah, Mohd. Noor and Ramzi Hannan, Nurul Izzati Raihan and Saiful Bahari, Nur Amira (2016) Potential of hollow glass microsphere as cement replacement for lightweight foam concrete on thermal insulation performance. In: International Symposium on Civil and Environmental Engineering, 05-DEC-16, Melaka, Malaysia.

Ghazali, N. and Zainuddin, K. and Zainal, M. Z. and Dali, H. M. and Samad, A. M. and Mahmud, M. R. (2016) The potential of mangrove forest as a bioshield in Malaysia. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Mohamed, N. and Sam, S. M. and Ngajikin, N. H. (2016) Power fading effects in millimeter-wave radio over fiber (RoF) link. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Awal, M. R. and Jusoh, M. and Kamarudin, M. R. and Sabapathy, T. and Rahim, H. A. and Malek, M. F. A. (2016) Power harvesting using dual transformations of piezoelectricity and magnetism: a review. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Abdullah, A. C. and Ooi, C. Y. and Ismail, N. B. and Mohammad, N. B. (2016) Power-aware through-silicon-via minimization by partitioning finite state machine with datapath. In: 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, 22 May 2016 through 25 May 2016, Montreal's Sheraton CentreMontreal; Canada.

Aziz, M. A. H. and Omar, K. M. and Din, A. H. M. and Reba, M. N. M. (2016) Pre- analysis assessment of Sea Surface Temperature (SST) products in the region of Malaysian coastal water. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Basri, S. and Kama, N. and Haneem, F. and Ismail, S. A. (2016) Predicting effort for requirement changes during software development. In: 7th Symposium on Information and Communication Technology, SoICT 2016, 8 December 2016 through 9 December 2016, Vietnam.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Najafian, G. (2016) Prediction of 100-year responses of fixed offshore structures using the modified version of finite memory nonlinear system models. In: 12th ISOPE Pacific-Asia Offshore Mechanics Symposium, PACOMS 2016, 4-7 Oct 2016, Gold Coast, Australia.

Razaq, S. A. and Shahid, S. and Ismail, T. and Chung, E. S. and Mohsenipour, M. and Wang, X. J. (2016) Prediction of flow duration curve in ungauged catchments using genetic expression programming. In: 12th International Conference on Hydroinformatics - Smart Water for the Future, HIC 2016, 21-26 Aug 2016, South Korea.

Mohd. Zaki, N. I. and Abu Husain, M. K. and Mukhlas, N. A. and Najafian, G. (2016) Prediction of offshore structural response extreme values by modified finite-memory nonlinear system modeling. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Ghazali, R. and Rahim, H. A. (2016) Prediction of raw broiler shear force using visible and short wave near infrared spectroscopy. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Candra, F. and Abu-Bakar, S. A. R. (2016) Prediction of soluble solid content of starfruit using spectral imaging combined with partial least squares and support vector regression. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19 - 20 Okt 2015, Kuala Lumpur, Malaysia.

Sheau-Ting, L. and Sin-Yee, T. and Weng-Wai, C. (2016) Preferred attributes of waste separation behaviour: an empirical study. In: International Conference on Sustainable Design, Engineering and Construction, ICSDEC 2016, 18-20 May 2016, Arizona State UniversityTempe, United States.

Azhar, A. T. S. and Fazlina, M. I. S. and Aziman, M. and Fairus, Y. M. and Azman, K. and Hazreek, Z. A. M. (2016) Preliminary analysis on matric suction for barren soil. In: International Engineering Research and Innovation Symposium, IRIS 2016, 24 November 2016 through 25 November 2016, Melaka; Malaysia.

Awang, Norkhushaini and Selamat, Harihodin and Shariff, Sya Azmeela (2016) Preliminary study on ISMS ISO 27001:2013 implementation to government agencies in Malaysia. In: Postgraduate Annual Research on Informatics Seminar (PARIS 2016), 2016, Kuala Lumpur, Malaysia.

Othman, F. E. C. and Yusof, N. and Jaafar, J. and Ismail, A. F. and Hasbullah, H. and Abdullah, N. and Ismail, M. S. (2016) Preparation and characterization of Polyacrylonitrile/ Manganese Dioxides- based Carbon Nanofibers via electrospinning proce. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Abdullah, N. and Yusof, N. and Jaafar, J. and Ismail, A. and Othman, F. E. C. and Hasbullah, H. and Salleh, W. N. W. and Misdan, N. (2016) Preparation of polyacrylnitrile (PAN)/ Manganese oxide based activated carbon nanofibers (ACNFs) for adsorption of Cadmium (II) from aqueous solution. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, The Pacific Sutera HotelKota Kinabalu, Sabah; Malaysia.

Zamri, S. N. A. and Sarmin, N. H. and Omer, S. M. S. and El-Sanfaz, M. A. (2016) The probability that an element of a metacyclic 3-group of negative type fixes a set and its orbit graph. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Zamri, S. N. A. and Sarmin, N. H. and Omer, S. M. S. (2016) The probability that an element of a metacylic 3-group fixes a set of size three. In: 7th SEAMS UGM International Conference on Mathematics and Its Applications: Enhancing the Role of Mathematics in Interdisciplinary Research, 18 - 21 Aug 2015, Yogyakarta, Indonesia.

Suleiman, D. U. and Esa, M. and Malik, N. N. N. A. and Yusof, M. F. M. and Hamid, M. R. A. (2016) Process noise parameters of beamforming nodes in wireless sensor networks (WSNs). In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 December 2015 through 14 December 2015, Kuala Lumpur; Malaysia.

Suleiman, D. U. and Esa, M. and Malik, N. N. N. A. and Yusof, M. F. M. and Hamid, M. R. A. (2016) Process noise parameters of beamforming nodes in wireless sensor networks (WSNs). In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Noor, F. M. and Jamaludin, K. R. and Ahmad, S. (2016) Production of stainless steel 316L foam with different solid loading. In: Seminar on Advanced Materials haracterization Techniques in Research, Industry and Nuclear Applications, AMCT 2015, 9-10 June 2015, Selangor, Malaysia.

Chong, K. C. and Lai, S. O. and Thiam, H. S. and Lau, W. J. (2016) The progress of polymeric membrane separation technique in O2/N2 separation. In: 2nd International Conference on Science and Engineering of Materials, ICoSEM 2015, 16-18 Nov 2015, Kuala Lumpur, Malaysia.

Noordin, Muhammad Khair and Nordin, Mohd. Safarin (2016) Project-based learning (PjBL) framework in developing non-technical skills for engineering students. In: TVET International Conference 2016 (TVETIC), 18-20 Nov, 2016, Johor Bahru, Malaysia.

Aminudin, E. and Md. Din, M. F. and Hussin, M. W. and Abdullah, A. H. and Iwao, K. and Ichikawa, Y. (2016) Properties of agro-industrial aerated concrete as potential thermal insulation for building. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Faris, M. A. and Abdullah, M. M. A. B. and Ismail, K. N. and Muniandy, R. and Mahmad Nor, A. and Putra Jaya, R. and Waried Wazien, A. Z. (2016) Properties of hooked steel fibers reinforced alkali activated material concrete. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Thailand.

Shilan, S. T. and Mazlan, S. A. and Khairi, M. H. A. and Ubaidillah, Ubaidillah (2016) Properties of plate-like carbonyl iron particle for magnetorheological fluid. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Ping, T. C. and Jalil, R. A. (2016) Property types diversification strategy of Malaysian real estate investment trust (M-REITs). In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Yamada, Yoshihide and Kamardin, Kamilia and Hakimi, Shayan and Abdul Rahim, Sharul Kamal and Abd. Hamid, Salbiah and Abd. Rahman, Nurul Huda (2016) Proposal of a cylindrical lens antenna for 5G base station. In: Malaysia-Japan Joint International Conference (MJJIC2016), 2016, Kuala Lumpur, Malaysia.

Yong, Zhang and Udin, Amirmudin and Kamin, Yusri and Abdul Karim, Noriadah (2016) A proposal research framework of competitive advantage for vocational colleges in undeveloped areas of China. In: 2nd International Conference on Social Science and Development (ICSSD 2016), 2016, China.

Yusof, S. M. and Aoki, K. (2016) Proposed lean sustained factors. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8 - 10 Mac 2016, Kuala Lumpur, Malaysia.

Zakaria, N. A. and Ibrahim, S. and Mahrin, M. N. (2016) A proposed value-based software process tailoring framework. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Niknejad, N. and Ghani, I. and Hussin, A. R. C. and Saedi, A. (2016) Proposing a new framework for service oriented architecture adoption. In: 3rd International Conference on Computer and Information Sciences, ICCOINS 2016, 15 August 2016 through 17 August 2016, Kuala Lumpur; Malaysia.

Hassan, M. F. and Mat Saman, M. Z. and Sharif, S. (2016) ProSET: a decision support system for sustainability performance evaluation. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Sapri, Maimunah and Abdullah Hashim, Hariati and Low, Sheau Ting and Sipan, Ibrahim @ Atam (2016) Public private partnership benefits in delivering public facilities in Malaysia. In: The 4th International Building Control Conference 2016 (IBCC2016)- Matec Web Of Conferences, 7 - 8 Mar, 2016, Kuala Lumpur, Malaysia.

Bahar, N. D. and Marimuthu, S. and Yahya, W. J. (2016) Pulsed Nd: YAG laser drilling of aerospace materials (Ti-6Al-4V). In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Mohd. Sharif, N. and Md. Yusoff, N. and Zaki, S. A. (2016) Q-switched Thulium-doped fiber laser using nitrogen-doped graphene in linear and ring cavity. In: 6th IEEE International Conference on Photonics, ICP 2016; Kuching, Sarawak; Malaysia, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Coulibaly, Y. and Latiff, M. S. A. and Umaru, A. M. and Garcia, N. M. (2016) QoS performance analysis of non-slotted and slotted optical burst switched networks. In: 12th IEEE Malaysia International Conference on Communications, MICC 2015, 23 November 2015 through 25 November 2015, Sarawak; Malaysia.

Baharin, K. A. and Rahman, H. A. and Hassan, M. Y. and Gan, C. K. and Sulaima, M. F. (2016) Quantifying Variability for Grid-connected photovoltaics in the tropics for microgrid application. In: Applied Energy Symposium and Submit: Renewable Energy Integration with Mini/Microgrid, REM 2016, 19 April 2016 through 21 April 2016, Maldives.

Mohamed, F. and Mong, W. S. and Yusoff, Y. A. (2016) Quaternion based freehand 3D baby phantom reconstruction using 2D ultrasound probe and game controller motion and positioning sensors. In: International Conference for Innovation in Biomedical Engineering and Life Sciences, ICIBEL 2015, 6-8 Dec 2015, Putrajaya, Malaysia.

Wan Hassan, Wan Muhamad Saridan and Jusoh, Noraina Hanim (2016) Radiation dose of industrial betatron. In: PSM Symposium 2016, 2016, Skudai, Johor.

Bahruddin, N. A. and Hashim, S. and Karim, M. K. A. and Sabarudin, A. and Ang, W. C. and Salehhon, N. and Bakar, K. A. (2016) Radiation dose to physicians' eye lens during interventional radiology. In: 13th South-East Asian Congress of Medical Physics, SEACOMP 2015, 10 - 12 Dec 2015, Yogyakarta, Indonesia.

Sabapathy, T. and Jusoh, M. and Soh, P. J. and Ahmad, R. B. and Kamarudin, M. R. (2016) Radiation pattern reconfigurable antenna: The design challenges at GHz frequencies. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Abdullah, Nurul Hidayah and Shameli, Kamyar (2016) Rapid removal of copper from aqueous solution by magnetite zeolite nanocomposite as adsorbent. In: Malaysia-Japan Joint International Conference (MJJIC2016), 06-07 Sep, 2016, Kuala Lumpur, Malaysia.

Afripin, M.A.A. and Fadil, N.A. and Hamid, M.F.A. and Yoon, C.K. and Cheah, B.E. and Razak, B.B.A. and Tamin, M.N. (2016) Rate-dependent responses of electroless plated and sputtered copper layer during nanoindentation loading. In: 37th IEEE International Electronics Manufacturing Technology, IEMT 2016, 20 September 2016 through 22 September 2016, Georgetown, Penang; Malaysia.

Grepl, J. and Penhaker, M. and Kubicek, J. and Liberda, A. and Mashinchi, R. (2016) Real time signal detection and computer visualization of the patient respiration. In: 2nd International Conference on Communication and Computer Engineering, ICOCOE 2015, 9-11 June 2015, Phuket, Thailand.

Ariffin, A. and Laurens, J. M. and Mansor, S. (2016) Real-time evaluation of second generation intact stability criteria. In: International Conference on Smart Ship Technology 2016, 26-27 Jan 2016, London, United Kingdom.

Mesicek, J. and Krejcar, O. and Selamat, A. and Kuca, K. (2016) A recent study on hardware accelerated Monte Carlo modeling of light propagation in biological tissues. In: 29th International Conference on Industrial Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2016, 2-4 Aug 2016, Morioka, Japan.

Mohamad, M. and Selamat, A. (2016) Recent study on the application of hybrid rough set and soft set theories in decision analysis process. In: 29th International Conference on Industrial Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2016, 2-4 Aug 2016, Morioka, Japan.

Amusuk, D. J. and Hashim, M. and Pour, A. B. (2016) Reclamation of mosquito breeding sites using Landsat-8 remote sensing data: a case study of Birnin Kebbi, Nigeria. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Lago, H. and Jamlos, M. F. and Bahari, N. and Hamid, M. R. (2016) Reconfigurable beam pattern folded dipole antenna based on AMC structure. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Shakhirul, M. S. and Jusoh, M. and Ismail, A. H. and Kamarudin, M. R. and Rahim, H. A. and Sabapathy, T. (2016) Reconfigurable frequency with circular polarization for on-body wearable textile antenna. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Wan Marzudi, W. N. N. and Zainal Abidin, Z. and Dahlan, S. H. and Ramli, K. N. and Majid, H. A. and Kamarudin, M. R. (2016) Rectangular patch with partial ground wearable antenna for 2.4 GHz applications. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Salah, K. and Kama, N. (2016) Reducing range anxiety by unifying networks of charging stations. In: 2016 3rd International Conference on Manufacturing and Industrial Technologies, ICMIT 2016, 25 May 2016 through 27 May 2016, Turkey.

Shafiee, M. A. S. M. and Yusoff, M. F. M. and Johari, Z. and Ismail, M. K. H. and Rahim, M. K. A. (2016) Reflectarray antenna performances using combination of rectangular and jerusalem unit cells at 5.2 GHz. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Lv, P. and Pagliaroli, T. and Gong, J. and Zhang, Y. and Zawawi, F. M. (2016) Reflection of acoustic wave in real atmosphere for hypersonic boundary layer control. In: 8th AIAA Flow Control Conference, 2016, 13-17 June 2016, Washington, United States.

Noor, N. M. and Rijal, O. M. and Than, J. C. M. and Kassim, R. M. and Yunus, A. (2016) Regression as a tool to measure segmentation quality and preliminary indicator of diseased lungs. In: 7th Pacific-Rim Symposium on Image and Video Technology, PSIVT 2015, 25-27 Nov 2015, Auckland, New Zealand.

Y. M., Fadzli and Mohd. Yusof, Nor Fasiha and F. N., Norlisa (2016) Relationship between eye behaviour during conceptual stage design process and the level of creativity. In: First Multidisciplinary Conference on Mechanical Engineering (MCME2016), 29 Nov 2016, Johor, Malaysia.

Mat Sooma, E. and Abu Husain, M. K. and Mohd. Zaki, N. I. and Azman, N. U. and Najafian, G. (2016) Reliability-based design and assessment for lifetime extension of ageing offshore structures. In: ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2016, 19-24 June 2016, Busan, South Korea.

Moghaddam, F. F. and Vala, M. and Ahmadi, M. and Khodadadi, T. and Madadipouya, K. (2016) A reliable data protection model based on re-encryption concepts in cloud environments. In: 6th IEEE Control and System Graduate Research Colloquium, ICSGRC 2015, 10-11 Aug 2015, Selangor, Malaysia.

Pour, A. B. and Hashim, M. (2016) Remote sensing analysis of geological structures in Peninsular Malaysia using PALSAR data. In: 36th IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2016, 10 July 2016 through 15 July 2016, China.

Johari, K. and Saman, N. and Tien, S. S. and Chin, C. S. and Kong, H. and Mat, H. (2016) Removal of elemental mercury by coconut pith char adsorbents. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Rahman, M. M. and Saat, A. and Wahid, M. A. (2016) Renewable energy policy in Germany and Malaysia: success factors. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Lichter, Horst and Foegen, Konrad and Sunetnata, Thanwadee and Anwar, Toni (2016) Report on the 4th international workshop on quantitative approaches to software quality (QuASoQ 2016). In: Joint Proceedings of The 4th International Workshop on Quantitative Approaches to Software Quality (Quasoq 2016) and 1st International Workshop on Technical Debt Analytics (TDA 2016), 06 Dec, 2016, New Zealand.

Achimugu, P. and Selamat, A. and Ibrahim, R. (2016) ReproTizer: a fully implemented software requirements prioritization tool. In: International Conference on computer-based methods of computational collective intelligence, CCI 2016, 2016, Tel Aviv, Israel.

Kaneshiro, S. and Mitsukura, Y. and Hamada, N. (2016) Respiratory sound analysis for continuous positive airway pressure machines. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Kalu, J. U. and Aliagha, G. U. and Buang, A. (2016) A review of economic factors influencing voluntary carbon disclosure in the property sector of developing economies. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science, AeroEarth 2015, 26-27 Sept 2015, Jakarta, Indonesia.

Abdul-Malek, Z. and Khavari, A. H. and Wooi, C. L. and Moradi, M. and Naderipour, A. (2016) A review of modeling ageing behavior and condition monitoring of zinc Oxide Surge Arrester. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 December 2015 through 14 December 2015, Berjaya Times Square Hotel1 Jalan Imbi, 55100 Kuala Lumpur; Malaysia.

Cheng, L. K. and Puteh, F. and Selamat, A. and Mohamed, F. B. (2016) A review of recent usability measures in English Language Teaching (ELT) technologies. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Wee, S. Y. and Thoo, A. C. and Sulaiman, Z. and Muharam, F. M. (2016) A review of supply chain collaboration practices for small and medium-sized manufacturers. In: 4th International Conference on Manufacturing, Optimization, Industrial and Material Engineering, MOIME 2016, 19 March 2016 through 20 March 2016, Indonesia.

Mohamad, M. E. and Mahmood, A. A. and Min, A. Y. Y. and Khalid, N. H. A. (2016) A review of the mechanical properties of concrete containing biofillers. In: International Engineering Research and Innovation Symposium, IRIS 2016, 24 November 2016 through 25 November 2016, Melaka; Malaysia.

Gill, J. and Shariff, N. S. and Omar, K.M . and Din, A. H. M. and Amin, Z. M. (2016) A review on legal traceability of gnss measurements in the Malaysian cadastral practice. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Khairuddin, A. R. and Talib, M. S. and Haron, H. (2016) Review on simultaneous localization and mapping (SLAM). In: 5th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2015, 27 November 2015 through 29 November 2015, Penang; Malaysia.

Tareq, Mohammad Ali and Ihlasuddini, Habiba Nabila (2016) A review on the board of directors. In: Proceedings International Conference on Innovation and management, Malaysia 2016, 28-30 Nov, 2016, Kuala Lumpur, Malaysia.

Almaatouk, Q. and Othman, M. S. B. and Al-Khazraji, A. (2016) A review on the potential of cloud-based collaboration in construction industry. In: 3rd MEC International Conference on Big Data and Smart City, ICBDSC 2016, 15 March 2016 through 16 March 2016, Oman.

Grout, I. A. and Zaidi, M. and Sterckx, K. L. and A'Ain, A. K. (2016) RGB LED driver circuit design for an optical fiber sensor system. In: 13th International Conference on Electrical Engineering/Electronics, Computer, Telecommunications and Information Technology, ECTI-CON 2016, 28 June 2016 through 1 July 2016, Thailand.

Ahmad Nasir, Izzah Athirah and Alis, Adilah and Mohamad, Zurina and A. Majid, Rohah (2016) Rigid polyurethane foam-based palm oil polyol/polyepropylene glycol blend. In: International of Global Network for Innovative Technology (IGNITE 2016), 27-29 Jan, 2016, Pulau Pinang, Malaysia.

Eka Putranti, Vina Wahyuni and Ismail, Zool Hilmi and Namerikawa, Toru (2016) Robust-formation control of multi-autonomous underwater vehicles based on consensus algorithm. In: IEEE Conference on Control Applications (CCA) 2016, 2016, Argentina.

Yuhaniz, Mayamin and Mohd. Jusan, Mahmud (2016) The role and activities of Malay housewives and their influence on housing design preferences. In: Procedia Social and Behavioral Sciences, 25-27 Apr, 2015, Jakarta, Indonesia.

Rahim, R. A. and Mahmood, N. H. N. and Masrom, M. (2016) The role of knowledge management in facilitating innovation for sustainable SMEs performance. In: International Conference on Technology, Informatics, Management, Engineering and Environment, TIME-E 2015, 7-9 Sept 2015, Toba Lake, Indonesia.

Ayodele, S. O. and Oga, O. E. and Bundot, Y. G. and Ogbari, M. E. (2016) Role of power supply towards e-learning acceptance: VBSEM-AMOS. In: 6th International Conference on Information Communication and Management, ICICM 2016, 29 October 2016 through 31 October 2016, United Kingdom.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Roles and responsibilities of construction players in projects using building information modeling (BIM). In: 12th IFIP WG 5.1 International Conference on Product Lifecycle Management in the Era of Internet of Things, PLM 2015, 19-21 Oct 2015, Doha, Qatar.

Othman, N. and Samsuri, N. A. and Rahim, M. K. A. and Elias, N. A. (2016) SAR in the presence of conductive medical implant at 0.9, 1.8 and 2.4 GHz due to close proximity antenna. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Ali, M. K. and Alam, M. J. and Rahman, M. M. (2016) Save water to save our next generation. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Nawi, A. A. and Ali, N. M. M. and Sarmin, N. H. and Rashid, S. (2016) The Schur multiplier of pairs of groups of order p3q. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Hanapi, S. Z. and Hatti-Kaul, R. and Aziz, R. and Othman, N. Z. and El-Enshasy, H. A. (2016) Screening for ligninolytic enzyme production by white rot fungi from Malaysia using different medium. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Liau, Q. Y. and Leow, C. Y. (2016) Secrecy outage probability of two-path successive relaying in physical layer security. In: 21st IEEE International Conference on Parallel and Distributed Systems, ICPADS 2015, 14-17 Dec 2015, Melbourne, Australia.

Abdallah, A. and Salleh, M. (2016) Secret sharing scheme security and performance analysis. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015, 7-9 Sept 2015, Khartoum, Sudan.

Pour, A. B. and Hashim, M. (2016) Sediment-hosted/orogenic gold mineral systems exploration using PALSAR remote sensing data in Peninsular Malaysia. In: 8th IGRSM International Conference and Exhibition on Geospatial and Remote Sensing, IGRSM 2016, 13 April 2016 through 14 April 2016, Kuala Lumpur; Malaysia.

Jan, N. A. M. and Shabri, A. and Badyalina, B. (2016) Selecting probability distribution for regions of Peninsular Malaysia streamflow. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Ashaari, A. and Ahmad, T. and Zenian, S. and Shukor, N. A. (2016) Selection probe of EEG using dynamic graph of autocatalytic set (ACS). In: 2nd International Conference on Soft Computing in Data Science, SCDS 2016, 21-22 Sept 2016, Kuala Lumpur, Malaysia.

Yousefi, A. T. and Mahmood, M. R. and Ikeda, S. (2016) Selective aspect ratio of CNTs based on annealing temperature by TCVD method. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, IC-NET 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Nafea, M. and Abuziater, A. and Faris, O. and Kazi, S. and Ali, M. S. M. (2016) Selective wireless control of a passive thermopneumatic micromixer. In: 29th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2016, 24-28 Jan 2016, Shanghai, China.

Tuan, N. T. and Yamada, Y. and Dinh, N. Q. and Michishita, N. (2016) Self-resonant structures of normal-mode helical antennas embedded in dielectric and magnetic materials. In: 8th International Conference on Advanced Technologies for Communications, ATC 2015, 14 - 16 Okt 2015, Vietnam.

Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. (2016) Self-written waveguide (SWW) optical pin for high optical coupling in multi-layer printed wiring board. In: 6th IEEE International Conference on Photonics, ICP 2016, 14 March 2016 through 17 March 2016, Sarawak; Malaysia.

Dogon-Yaro, M. A. and Kumar, P. and Abdul Rahman, A. and Buyuksalih, G. (2016) Semi-automated approach for mapping urban trees from integrated aerial lidar point cloud and digital imagery datasets. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2016) Sensitivity analysis of industrial heat exchanger network design. In: Regional Conference on Chemical Engineering 2016, 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Ali, M. A. H. and Mailah, M. and Yussof, W. A. B. and Hamedon, Z. B. and Yussof, Z. B. and Majeed, A. P. P. (2016) Sensors fusion based online mapping and features extraction of mobile robot in the road following and roundabout. In: Joint Conference of 2nd International Manufacturing Engineering Conference, iMEC 2015 and 3rd Asia-Pacific Conference on Manufacturing Systems, APCOMS 2015, 12 - 14 Nov 2015, Kuala Lumpur, Malaysia.

Yaziz, N. S. M. and Rahim, M. K. A. and Zubir, F. and Murad, N. A. (2016) Series iteration of Fractal Koch antenna at UHF band. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Li, M. and Abu-Rub, H. and Liu, Y. and Ge, B. and Salam, Z. (2016) SiC power devices and applications in quasi-Z-source converters/inverters. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Zainal, N. A. and Kamarudin, M. R. and Yamada, Y. and Seman, N. and Khalily, M. and Jusoh, M. (2016) Sidelobe reduction of unequally spaced arrays for 5G applications. In: 10th European Conference on Antennas and Propagation, EuCAP 2016; Davos; Switzerland, 10 April 2016 through 15 April 2016, Switzerland.

Fadzil, N. M. and Hamzah, S. A. and Shire, A. M. and Ramli, K. N. and Seman, F. C. and Esa, M. and Malik, N. N. N. A. (2016) Sierpinski carpet fractal antenna with harmonic suppression capability. In: 6th International Conference on Computer and Communication Engineering, ICCCE 2016, 25 July 2016 through 27 July 2016, Kuala Lumpur; Malaysia.

Ubaidillah, Ubaidillah and Pamungkas, K. and Nizam, M. and Mazlan, S.A. (2016) Simulation and model verification of a vehicle handling dynamics. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Indonesia.

Abdullah, M. A. and Tan, C. W. and Yatim, A. H. M. (2016) A simulation comparison of PI and Linear Quadratic Regulator controllers in DC-DC converter. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Dung, D. T. and Dinh, N. Q. and Tuan, N. T. and Yamada, Y. and Michishita, N. (2016) Simulation methods of a normal-mode helical antenna in a human body condition. In: 9th International Conference on Advanced Technologies for Communications, ATC 2016, 12 October 2016 through 14 October 2016, Vietnam.

Yousefi, A. T. and Mahmood, M. R. and Miyake, M. and Ikeda, S. (2016) Simulation of CNT-AFM tip based on finite element analysis for targeted probe of the biological cell. In: International Conference on Nano-Electronic Technology Devices and Materials 2015, 27 February 2015 through 2 March 2015, Selangor; Malaysia.

Su, A. S. B. M. and Ghani, R. B. A. (2016) Simulation of DC to DC converter with embeded snubber circuit maximum power point tracking. In: 3rd International Conference on Advances in Electrical Engineering, ICAEE 2015, 17 December 2015 through 19 December 2015, Bangladesh.

Abdullah, J. and Abobaker, A. A. W. and Elijah, O. (2016) Simulation of DVB-T2 integrated receiver decoder specifications for ASEAN countries. In: 5th IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2015, 27 November 2015 through 29 November 2015, PARKROYAL Penang ResortBatu Ferringhi, Penang; Malaysia.

Lestari, F. and Ismail, K. and Hamid, A. B. A. and Supriyanto, E. and Sutupo, W. (2016) Simulation of refinery-supplier relationship. In: International Multiconference of Engineers and Computer Scientists 2016, IMECS 2016, 16-18 March 2016, Kowloon, Hong Kong.

Idris, N. and Zainuddin, Z. M. (2016) A simultaneous integrated model with multiobjective for continuous berth allocation and quay crane scheduling problem. In: 3rd International Conference on Industrial Engineering, Management Science and Applications, ICIMSA 2016, 23 May 2016 through 26 May 2016, South Korea.

Sumali, B. and Sarkan, H. and Hamada, N. and Mitsukura, Y. (2016) Single image Super Resolution by no-reference image quality index optimization in PCA subspace. In: 12th IEEE International Colloquium on Signal Processing and its Applications, CSPA 2016, 4 March 2016 through 6 March 2016, Melaka; Malaysia.

Jamaluddin, M. H. and Mohammad, N. A. and Naqiyah, S. Z. (2016) Size reduction of MIMO dielectric resonator antenna for LTE application. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Alamri, Y. A. and Idris, N. R. N. and Alsofyani, I. M. (2016) Sliding mode observer-based MRAS for direct torque control of induction motor. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Rahman, N. A. and Jamlos, M. F. and Rahim, S. K. A. (2016) Slotted log periodic antenna with first iteration Fractal Koch technique for UHF TVWS applications. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Drabek, A. and Krejcar, O. and Selamat, A. and Kuca, K. (2016) A smart Arduino alarm clock using Hypnagogia detection during night. In: 29th International Conference on Industrial Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2016, 2-4 Aug 2016, Morioka, Japan.

Idris, R. M. and Nasir, N. and Ab. Khalid, N. S. and Mustafa, M. W. and Arzeha, N. A. (2016) SMS conflict detection traffic light. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Ali, N. E. H. and Siong, H. C. (2016) Social factors influencing household solid waste minimisation. In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Chee, P. S. and Mah, C. K. and Ali, M. S. M. (2016) Soft dielectric elastomer actuator for micropump application. In: 29th IEEE International Conference on Micro Electro Mechanical Systems, MEMS 2016, 24-28 Jan 2016, Shanghai, China.

Yusof, M. F. and Setapa, A. S. and Tajudin, S. A. A. and Madun, A. and Abidin, M. H. Z. and Marto, A. (2016) The soil-water characteristic curve of unsaturated tropical residual soil. In: Soft Soil Engineering International Conference 2015, SEIC 2015, 27 October 2015 through 29 October 2015, Langkawi; Malaysia.

Nanthasurasak, P. and See, H. H. and Guijt, R. M. and Breadmore, M. C. (2016) "Solid state" electrophoresis. In: 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2016, 9-13 Oct 2016, Dublin, Ireland.

Nawi, I. N. M. and Ali, J. and Yupapin, P. P. (2016) Soliton pulse induces TPA effect in a silicon MRR all-optical switch. In: IEEE Conference on System, Process and Control, ICSPC 2015, 19 December 2015 through 20 December 2015, Malaysia.

Al-Shatri, S. H. H. and Murid, A. H. M. and Ismail, M. (2016) Solving robin problems in bounded doubly connected regions via an integral equation with the generalized neumann kernel. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Wahid, M. A. and Panomruttanarug, B. and Drouin, A. and Mora-Camino, F. (2016) Space-indexed aircraft trajectory tracking. In: 28th Chinese Control and Decision Conference, CCDC 2016, 28 May 2016 through 30 May 2016, China.

Amah, T. E. and Kamat, M. and Bakar, K. A. and Moreira, W. and Oliveira, A. and Batista, M. A. (2016) Spatial locality in pocket switched networks. In: 17th International Symposium on a World of Wireless, Mobile and Multimedia Networks, WoWMoM 2016, 21 June 2016 through 24 June 2016, Portugal.

Othman, N. and Samsuri, N. A. and Rahim, M. K. A. and Elias, N. A. (2016) Specific Absorption Rate in the human leg and testicle due to metallic coin and zip. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Muminov, Z. and Manaf, N. A. and Kuljanov, U. (2016) Spectral properties of the discrete Schrödinger operator with non-local potential. In: 2nd International Conference on Mathematical Sciences and Statistics: Innovations Through Mathematical and Statistical Research, ICMSS 2016, 26 January 2016 through 28 January 2016, Kuala Lumpur; Malaysia.

Monadi, A. and Jannati, M. and Idris, N. R. N. and Alavi, S. E. (2016) Speed estimation of faulty three-phase induction motor using model reference adaptive system. In: 2nd IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Baharudin, N. A. and Ambran, S. and Mikami, O. and Fujikawa, C. and Suzuki, A. and Taguchi, S. and Mitomi, O. (2016) Spot size converter using mask-Transfer self-written waveguide method for optical interconnection. In: 2016 IEEE CPMT Symposium Japan, ICSJ 2016; Kyoto; Japan, 7 November 2016 through 9 November 2016, Kyoto; Japan.

Norazni, S. A. and Yahya, W. J. and Ithnin, A. M. and Kadir, H. A. and Razak, I. F. A. and Bahar, N. D. and Sugeng, D. A. and Ramlan, N. A. (2016) Stability behavior of non-surfactant water-in-diesel emulsion fuel using microscopic observation. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Marto, A. and Jahidin, M. R. and Aziz, N. A. and Kasim, F. and Mohd Yunus, N. Z. (2016) Stabilization of marine clay using biomass silica-rubber chips mixture. In: International Engineering Research and Innovation Symposium, IRIS 2016, 24 November 2016 through 25 November 2016, Melaka; Malaysia.

Yao, L. W. and Aziz, J. A. and Idris, N. R. N. (2016) State-of-charge estimation for lithium-ion battery using Busse's adaptive unscented Kalman filter. In: 2015 IEEE Conference on Energy Conversion, CENCON 2015, 19 - 20 Okt 2015, Johor Bahru, Malaysia.

Alias, N. E. and Hassan, R. and Johari, Z. (2016) Statistical variability in n-channel SOI FinFET in the presence of random discrete dopant. In: 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016, 17 August 2016 through 19 August 2016, Kuala Lumpur; Malaysia.

Wahab, N. A. A. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Sharif, A. H. R. and Kamaruddin, S. (2016) Steady compression characteristics of laminated MRE isolator. In: 8th International Conference on Physics and its Applications, ICOPIA 2016, 23 August 2016 through 24 August 2016, Denpasar; Indonesia.

Shafie, N. A. M. and Said, M. F. M. and Aziz, A. A. and Latiff, Z. A. and Yamin, A. K. M. and Tamaldin, N. (2016) Steady flow and dynamic analyses comparison of an air intake breathing capacity. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Nabgan, Bahador and Tuan Abdullah, Tuan Amran and Nabgan, Walid and Tahir, Muhammad (2016) Steam reforming of phenol-PET solution over Ni/Al2O3 catalyst for hydrogen production. In: International Conference on Catalysis 2016, 2016, Skudai, Johor.

Abd. Rahman, S. F. and Sahar, M. R. (2016) The structural and conductivity characterization of P2O5-MgO-TiO2-Li2O glass ceramic embedded with nickel nanoparticles. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Abd. Rahman, Sharifah Fahsuhaizam and Sahar, Md. Rahim (2016) The structural and conductivity characterization of p2o5-mgo-tio2-li2o glass ceramic embedded with nickel nanoparticles. In: Materials Science Forum, Switzerland.

Hasim, N. and Rohani, M. S. and Sahar, M. R. (2016) Structural characteristics of er3+ and nd3+ doped lithium niobate tellurite glass. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Pour, A. B. and Hashim, M. (2016) Structural geology and topographic mapping of Kelantan river basin using PALSAR-2 remote sensing data for high risk area delination. In: 37th Asian Conference on Remote Sensing, ACRS 2016, 17-21 Oct 2016, Colombo, Sri Lanka.

Siam, F. M. and Grinfeld, M. (2016) A structurally unstable bistable system. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Zakaria, Nur Hazwani and Abdullah, Fatin Aliah Phang and Ali, Mohamad Bilal and Abu Samah, Norazrena (2016) Students' perception toward mobile computerbased physics laboratory (MCPL). In: International Graduate Conference on Engineering, Science and Humanities, 2016, Skudai, Johor.

Aziz, M. A. and Idris, K. M. and Majid, Z. and Ariff, M. F. M. and Yusoff, A. R. and Luh, L. C. and Abbas, M. A. and Chong, A. K. (2016) A study about terrestrial laser scanning for reconstruction of precast concrete to support qlassic assessment. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Khoo, W. H. and Sultan, S. M. (2016) A study of 3-D Zinc Oxide nanowire field effect transistor with defect and interface charge density. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Zainal, N. and Mohd Zain, A. and Sharif, S. (2016) A study of electrode wear ratio on EDM of Ti-6AL-4V with copper-tungsten electrode. In: 2nd International Conference on Green Design and Manufacture, IConGDM 2016, 1 May 2016 through 2 May 2016, Phuket; Thailand.

Alariki, A. A. and Manaf, A. B. A. and Khan, S. (2016) A study of touching behavior for authentication in touch screen smart devices. In: International Conference on Intelligent Systems Engineering, ICISE 2016, 15 January 2016 through 17 January 2016, Faisal Masjid Campus Islamabad; Pakistan.

Afrizal, Efi and Koto, Jaswar (2016) Study on development of ice-ship. In: Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering- Isomase, 07 Nov, 2016.

Sani, M. S. H. M. and Muftah, F. and Tan, C. S. and Tahir, M. M. (2016) Study on mechanical behaviour of cold-formed steel channel pre cut-curving beam. In: 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015, 21 December 2015 through 22 December 2015, Malaysia.

Rashid, N. A. and Yasin, M. N. M. and Kamardin, Kamilia and Ramli, N. and Jusoh, M. and Murad, S. A. Z. and Sulaiman, M. I. (2016) A study on relay effect via magnetic resonant coupling for wireless power transfer. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 2016.

Masreta, Mohd. @ Basri and Zainon, Othman and Rasib, Abd. Wahid and Majid, Zulkepli (2016) The study on the durability of submerged structure displacement due to concrete failure. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 2016, Kuala Lumpur, Malaysia.

Al-Rousan, R. and Sunar, M. S. and Kolivand, H. (2016) Stylized line drawings for shape depiction. In: 4th International Conference on Interactive Digital Media, ICIDM 2015, 1 December 2015 through 5 December 2015, Bandung; Indonesia.

Wang, Q. and Debbarma, D. and Lo, A. and Niemegeers, I. and De Groot, S. H. (2016) Sum-rates of radio-over-fiber small cell networks and massive MIMO for indoor communications. In: 22nd IEEE Symposium on Communications and Vehicular Technology in the Benelux, SCVT 2015, 24 Nov 2015, Luxembourg.

Norodin, N. S. M. and Salleh, L. M. and Hartati, Hartati and Mustafa, N. M. (2016) Supercritical carbon dioxide (SC-CO2) extraction of essential oil from Swietenia mahagoni seeds. In: 2nd International Conference on Chemical Engineering, ICCE 2016, 26 October 2016 through 27 October 2016, Indonesia.

Nasir, M. F. M. and Rahim, A. R. A. and Hamzah, H. S. (2016) Supply chain management framework development for new multiple life cycle product development. In: International Conference on Industrial Engineering and Engineering Management, IEEM 2016, 4 December 2016 through 7 December 2016, Bali; Indonesia.

Lestari, F. and Ismail, K. and Abdul Hamid, A. B. and Wan Omar, W. Z. and Wan Yusoff, W. F. (2016) Supply chain management strategy for an effective collaboration: a case study in Malaysia. In: 27th International Business Information Management Association Conference - Innovation Management and Education Excellence Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2016, 4-5 May 2016, Milan, Italy.

Hong, Liu and Mcbride, J. W. and Mohd. Yusop, Mohd. Zamri (2016) Surface characterization of a Au/CNT composite for a MEMS switching application. In: 16th International Conference on Nanotechnology - IEEE NANO 2016, 2016, Japan.

Hammuda Aluhwal, Omar Kalifa and Junin, Radzuan and Nasri, Noor Shawal (2016) Surfactant alternating carbonated water (SACW) is a new process forenhanced oil recovery. In: International Conference on Science, Engineering, Management and Social Science (ICSEMSS 2016), 2016, Skudai, Johor.

Murad, M. F. A. B. M. and Samah, M. I. B. and Ismail, Z. H. and Sammut, K. (2016) Surveillance of coral reef development using an autonomous underwater vehicle. In: 2016 Autonomous Underwater Vehicles, AUV 2016, 6 November 2016 through 9 November 2016, Japan.

Saidi, M. I. M. and Isa, M. A. and Jawawi, D. N. A. and Ong, L. F. (2016) A survey of software reliability growth model selection methods for improving reliability prediction accuracy. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Nasir, F. M. and Sunar, M. S. (2016) A survey on simulating real-time crowd simulation. In: 4th International Conference on Interactive Digital Media, ICIDM 2015, 1 December 2015 through 5 December 2015, Indonesia.

Syahid, A. and Tareq, M. A. and Zaki, S. A. (2016) Sustainability or bust: Malaysian home buyers' stated preferences for sus-tainable housing. In: 2016 3rd International Conference on Industrial Engineering and Applications, ICIEA 2016, 28 April 2016 through 30 April 2016, Hong Kong.

Ani, Farid Nasir (2016) Sustainable biofuels and other related bio-products from palm cultivations. In: 3rd International Conference on Mechanics and Mechatronics Research (ICMMR 2016), 2016.

Doulatabadi, M. and Yusof, S. M. and Wong, K. Y. (2016) Sustained quality award status in developing country: a study on the Dubai quality award recipients. In: IEOM Detroit Conference, IEOM 2016, 23-25 Sept 2016, Lawrence Technological University Southfield, United States.

Mohamad, N. and Ooi, C. Y. and Ismail, N. and Teh, J. (2016) SVA checker generator for FPGA-based verification platform. In: 2016 IEEE International Symposium on Circuits and Systems, ISCAS 2016, 22 May 2016 through 25 May 2016, Canada.

Shahadan, N. H. and Kamarudin, M. R. and Jamaluddin, M. H. and Khalily, M. and Jusoh, M. (2016) Switched parasitic dielectric resonator antenna array using capacitor loading for 5G applications. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Nabgan, Walid and Tuan Abdullah, Tuan Amran and Mat, Ramli and Nabgan, Bahador and Alir, Afizah and Gambo, Yahya (2016) Synthesis and characterizaton of a novel bimetallic Ni-Co/Zro2 nanostructure and microstructure for steam reforming of phenol. In: 5th Conference of Emerging Energy and Process Technology, 2016, Negeri Sembilan, Malaysia.

Pourdayhimi, Parisa and Pei, Wen Koh and Shamsuddin, Mustaffa and Nur, Hadi and Lee, Siew Ling (2016) Synthesis of zinc oxide immobilized mesoporous hollow silica composites without calcination for photocatalytic degradation of sodium dodecylbenzenesulfonate. In: 2nd Materials Research Society of Indonesia (MRS-ID), 2015, Bandung, Indonesia.

Ibrahim, S. N. K. A. and Harun, J. (2016) Systematic mapping studies on argumentative knowledge construction analysis frameworks towards improving students' higher order thinking skills. In: IEEE Conference on e-Learning, e-Management and e-Services, IC3e 2015, 24-26 Aug 2015, Melaka, Malaysia.

Tumari, N. F. and Jamlos, M. F. and Lago, H. and Rahim, S. K. A. (2016) T-shape slotted array antenna through via for triple band applications. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Bahrin, N. K. and Mohamad, R. (2016) TCG algorithm approach for UML sequence diagram. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Zeynivandnezhad, F. and Ismail, Z. and Yusof, Y. M. (2016) Teaching mathematical structures in differential equations using a computer algebra system to engineering students. In: 7th IEEE International Conference on Engineering Education, ICEED 2015, 17 November 2015 through 18 November 2015, Japan.

Muftah, F. and Sani, M. S. H. M. and Mohammad, S. and Ngian, S. P. and Tahir, M. M. (2016) Temperature development of cold formed steel column channel section under standard fire. In: 1st International Conference on Advanced Science, Engineering and Technology, ICASET 2015, 21 December 2015 through 22 December 2015, Penang; Malaysia.

Abdul Rahim, M. and Abdul Ghani, A. N. and Che Munaaim, M. A. and Sidik, M. A. B. and Zulkeflee, Z. (2016) The temperature effect to the concrete due to the single strike of high electric current. In: International Conference on Advanced Materials Engineering and Technology, ICAMET 2015, 4-5 Dec 2015, Kaohsiung, Taiwan.

Ahmad, M. S. and Mohamad, Z. and Ratnam, C. T. and Rudin, A. K. (2016) Tensile properties and morphology of irradiated EVA/ENR-50/sepiolite nanocomposites. In: 24th Scientific Conference of the Microscopy Society Malaysia, SCMSM 2015, 2-4 Dec 2015, Melaka, Malaysia.

Tumeng, R. and Jawawi, D. N. A. and Isa, M. A. (2016) Test case prioritization with textual comparison metrics. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Foudeh, Pouya and Khorshidtalab, Aida and Salim, Naomie (2016) Testing and analysis of the proposed data driven method on the opportunity human activity dataset. In: 2nd International Conference on Communication and Information Processing, ICCIP 2016, 26-29 Nov, 2016, Singapore, Singapore.

Majid, Z. and Lau, C. L. and Yusoff, A. R. (2016) Three-Dimensional recording of bastion middleburg monument using terrestrial laser scanner. In: 23rd International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences Congress, ISPRS 2016, 12-19 July 2016, Prague, Czech Republic.

Muzmar, M. A. R. and Abdullah, M. P. and Hassan, M. Y. and Hussin, F. (2016) Time of use pricing for residential customers case of Malaysia. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Hamedi, M. and Salleh, S. H. and Ismail, K. and Noor, A. M. and Astaraki, M. and Aslian, H. (2016) Time-frequency facial gestures EMG analysis using bilinear distribution. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19-21 Oct 2015, Kuala Lumpur, Malaysia.

Mohd. Rameli, Mohd. Rustam and Mohd. Kosnin, Azlina (2016) Tinjauan orientasi matlamat pencapaian matematik pelajar Malaysia: aplikasi pengukuran Rasch. In: 3rd International Education Postgraduate Seminar, 18-19 Dec, 2016, Universiti Teknologi Malaysia, Johor.

Ken, T. L. and Ahmad, T. B. and Mohd., M. S. B. and Ngien, S. K. and Suwa, T. and Meng, O. S. (2016) Topological properties of flat electroencephalography's state space. In: 1st Progress in Applied Mathematics in Science and Engineering, PIAMSE 2015, 29 Sept - 1 Oct 2015, Bali, Indonesia.

Fuza, Z. I. M. and Isa, S. M. and Ismail, H. N. (2016) Tour operators’ information and communication technology adoption in Malaysia. In: 3rd International Hospitality and Tourism Conference, IHTC 2016 and 2nd International Seminar on Tourism, ISOT 2016, 10-12 Oct 2016, Bandung, Indonesia.

Latiffi, A. A. and Brahim, J. and Fathi, M. S. (2016) Transformation of Malaysian construction industry with Building Information Modelling (BIM). In: 4th International Building Control Conference, IBCC 2016, 7 March 2016 through 8 March 2016, Kuala Lumpur; Malaysia.

Abdullah, M. A. and Rahim, M. K. A. and Samsuri, N. A. (2016) Transmission enhancement between textile diamond dipole antennas with a dual-band Textile Artificial Magnetic Conductor sheet. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Riverside Majestic HotelKuching, Sarawak; Malaysia.

Rahim, S. K. A. and Samingan, M. L. and Saady, B. M. (2016) Transparent Butler Matrix using Micro-metal Mesh conductive film as a conducting element. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Norazmi, Nurul Ain and Wan Ibrahim, Wan Rohaizad (2016) Travelling salesman approach for solving visiting route using simulated annealing. In: Prosiding Projek Sarjana Muda Sains, 2016, Skudai, Johor.

Ishak, M. F. and Sulaiman, F. F. and Ali, N. and Kassim, A. (2016) Tree water uptake and suction distribution on tropical residual soil slope. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science, AeroEarth 2015, 26-27 Sept 2015, Jakarta, Indonesia.

Wahab, A. A. and Salim, M. I. M. and Yunus, J. and Aziz, M. N. C. (2016) Tumor localization in breast thermography with various tissue compositions by using Artificial Neural Network. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 December 2015 through 14 December 2015, Kuala Lumpur; Malaysia.

Wahab, A. A. and Salim, M. I. M. and Yunus, J. and Aziz, M. N. C. (2016) Tumor localization in breast thermography with various tissue compositions by using Artificial Neural Network. In: IEEE Student Conference on Research and Development, SCOReD 2015, 13 - 14 Dec 2015, Kuala Lumpur, Malaysia.

Said Mahraz, Z. A. and Sahar, M. R. and Ghoshal, S. K. (2016) Tuning surface plasmon in erbium-boro-tellurite nanoglass via thermal annealing. In: 28th Regional Conference on Solid State Science and Technology, RCSSST 2014, 25-27 Nov 2014, Pahang, Malaysia.

Orakwue, S. I. and Ngah, R. and Rahman, T. A. (2016) A two dimensional beam scanning array antenna for 5G wireless communications. In: 2016 IEEE Wireless Communications and Networking Conference Workshops, WCNCW 2016, 3 April 2016 through 6 April 2016, Qatar.

Ibrahim, S. and Yunus, M. A. M. and Khairi, M. T. M. and Sidik, M. A. B. (2016) Two phase flow imaging using infra red tomography. In: 2nd International Conference on Information Technology, Computer, and Electrical Engineering, ICITACEE 2015, 16-18 Oct 2015, Semarang, Indonesia.

Trayek, F. A. A. and Tunku Ahmad, T. B. and Nordin, M. S. and Dwikat, M. A. and Abulibdeh, E. S. A. and Asmar, M. and Sawari, S. S. M. (2016) Underlying Structure of e-Learning readiness among Palestinian secondary school teachers. In: 2016 8th International Conference on Computer and Automation Engineering, ICCAE 2016, 3 March 2016 through 4 March 2016, Australia.

Som, Z. A. M. and Yazid, A. M. and Ming, T. K. and Yazid, N. M. (2016) The unified levelling network of Sarawak and its adjustment. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Leong, M. S. and Lim, M. H. (2016) Use of vibration ods for structural integrity assessment of large engineering structures. In: 23rd International Congress on Sound and Vibration, ICSV 2016, 10-14 July 2016, Greece.

Amusuk, D. J. and Hashim, M. and Pour, A. B. and Musa, S. I. (2016) Utilization of landsat-8 data for lithological mapping of basement rocks of plateau state north central Nigeria. In: 2016 International Conference on Geomatic and Geospatial Technology, GGT 2016, 3 October 2016 through 5 October 2016, Kuala Lumpur; Malaysia.

Ngah, R. and Zahedi, Y. (2016) UWB communications: present and future. In: 7th IEEE Asia-Pacific Conference on Applied Electromagnetics, APACE 2016, 11-13 Dec 2016, Kedah, Malaysia.

Abu Kassim, Siti Farah and Jahan, Nusrat and Javed, Muhammad Arshad (2016) Varietal response to ferrous toxicity at germination stage in rice. In: 4th International Science Postgraduate Conference 2016, 22-24 Feb, 2016, Universiti Teknologi Malaysia, Johor.

Anuar, L. and Amrin, A. and Mohammad, R. and Ourdjini, A. (2016) Vehicle accelerated corrosion test procedures for automotive in Malaysia. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Ibrahim, Mohd. Faisal and Adnan, Rosanita and Yahya, Saadiah and Taib, Mohd. Nasir and Kamardin, Kamilia (2016) Video adaptation algorithm for mobile learning environment. In: The International Conference on Information Systems and Technology (ICIST 2016), 2016, Kota Kinabalu, Malaysia.

Arai, N. (2016) Virtual mass of any shape of body by using general mapping function. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Sarawak; Malaysia.

Mohd. Zabidi, Nurulnajah and Ab. Rahman, Ab. Al-Hadi (2016) VLSI design of a fast pipelined 8x8 discrete cosine transform. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering, 18-19 Dec, 2016, Johor Bahru, Malaysia.

Ping, P. Y. and Ahmad, M. H. B. and Ismail, N. B. (2016) Volatility spillover effect study in U.S. dollar and gold market based on bivariate-BEKK model. In: 23rd Malaysian National Symposium of Mathematical Sciences: Advances in Industrial and Applied Mathematics, SKSM 2015, 24 November 2015 through 26 November 2015, Johor Bahru; Malaysia.

Pagliaroli, T. and Iemma, U. and Bornaccioni, A. and Camussi, R. and Lv, P. and Mohd. Zawawi, F. (2016) Wall pressure fluctuations in hypersonic boundary layer: a strategy to design passive noise control systems. In: 22nd AIAA/CEAS Aeroacoustics Conference, 2016, 30 May - 1 June 2016, Lyon, France.

Norraji, M. F. and Sunar, M. S. (2016) WARna-Mobile-based augmented reality colouring book. In: 4th International Conference on Interactive Digital Media, ICIDM 2015, 1 December 2015 through 5 December 2015, Indonesia.

Zakaria, Z. and Ahmad, N. A. and Wooi, Z. C. L. and Esa, M. R. M. and Abdul-Malek, Zulkurnain (2016) Wavelet analysis for negative return stroke and narrow bipolar pulses. In: 33rd International Conference on Lightning Protection, ICLP 2016, 25 September 2016 through 30 September 2016, Estoril, Lisboa; Portugal.

Wooi, C. L. and Abdul-Malek, Z. and Ahmad, N. A. and Esa, M. R. M. and Zakaria, Z. and Ahmad, M. R. (2016) Wavelet analysis of chaotic pulse trains prior to subsequent return strokes in Malaysia. In: 33rd International Conference on Lightning Protection, ICLP 2016, 25 September 2016 through 30 September 2016, Lisboa; Portugal.

Hadji, S. E. and Salleh, M. and Rohani, M. F. and Kamat, M. (2016) Wavelet-based performance in denoising ECG signal. In: 8th International Conference on Signal Processing Systems, ICSPS 2016, 21 November 2016 through 24 November 2016, New Zealand.

Ismail, H. and Jawawi, D. N. A. and Adham Isa, M. (2016) A weakly hard real-time tasks on global scheduling of multiprocessor systems. In: 9th Malaysian Software Engineering Conference, MySEC 2015, 16 December 2015 through 17 December 2015, Kuala Lumpur; Malaysia.

Ahmad, Nor Bahiah and Abigail, Galvano Alazhar (2016) Web-based collaborative question bank with adaptive quiz generator. In: UTM Computing Proceedings (Innovations in Computing Technology and Applications), 01-02 Dec, 2016, Johor Bahru, Malaysia.

Farrah Diana, Farrah Diana and Saiful Bahry, Saiful Bahry and Masrom, Maslin and Masrek, Mohamad Noorman (2016) Website credibility and user engagement: a theoretical integration. In: 4th International Conference on User Science and Engineering, 23-25 Aug, 2016, Melaka, Malaysia.

Mohd., S. M. and Wan, R. W. S. and Abdul, R. I. and Mohd., Z. J. and Issham, I. (2016) Wettability alteration of dolomite rock using nanofluids for enhanced oil recovery. In: 4th International Conference on Nano and Materials Engineering, ICNME 2016, 7-8 April 2016, Bali Island, Indonesia.

Danesh, S. and Kamarudin, M. R. and Rahman, T. A. and Abedian, M. and Khalily, M. (2016) A wideband frequency reconfigurable rectangular dielectric resonator antenna. In: 10th European Conference on Antennas and Propagation, EuCAP 2016, 10 April 2016 through 15 April 2016, Switzerland.

Yaziz, N. S. M. and Rahim, M. K. A. (2016) Wideband textile antenna for wearable application. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Kadir, E. A. and Shamsuddin, S. M. and Hasan, S. and Rosa, S. L. (2016) Wireless monitoring for big data center server room and equipments. In: International Conference on Science in Information Technology, ICSITech 2015, 27-28 Oct 2015, Yogyakarta, Indonesia.

Kassim, M. N. and Maarof, M. A. and Zainal, A. and Wahab, A. A. (2016) Word stemming challenges in Malay texts: a literature review. In: 4th International Conference on Information and Communication Technology, ICoICT 2016, 25 May 2016 through 27 May 2016, Indonesia.

Thinakaran, R. and Ali, R. (2016) Work in progress: an initial review in programming tutoring tools. In: 4th IEEE International Conference on Teaching, Assessment and Learning for Engineering, TALE 2015, 10 - 12 Dec 2015, Zhuhai, China.

S., Sitti Hamsina and Mohammed Bash, Faizah and Sihes, Ahmad Johari (2016) Writing strategies skill (EWSS) for Makassar students in Universiti Teknologi Malaysia. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016), 2016, Skudai, Johor.