Universiti Teknologi Malaysia Institutional Repository

Beam steering printed dipole antenna on incorporate of polymeric and HIS

Lago, H. and Jamlos, M. F. and Hamid, M. R. (2016) Beam steering printed dipole antenna on incorporate of polymeric and HIS. In: 6th IEEE International RF and Microwave Conference, RFM 2015, 14 December 2015 through 16 December 2015, Sarawak; Malaysia.

Full text not available from this repository.

Official URL: https://www.scopus.com/inward/record.uri?eid=2-s2....

Abstract

This report presented a beam steering dipole antenna on incorporate polymeric and High Impedance Surface (HIS). In order to achieve the reconfigurability, two radio frequency (RF) switches are implemented on the antenna. By manipulating the RF switch state, the antenna is capable of reconfiguring its beam into two different directions at 28° and -28°. The RF switch will affected the antenna gain due to the electronic losses, thus High Impedance Surface (HIS) is applied on the antenna. In order to enhance the antenna bandwidth, a polymeric material is employed. With a dimension of 27.45 × 50.7 mm, the antenna has potential to sustain the gain of 6.27 dB and 1.24 GHz of bandwidth for all states.

Item Type:Conference or Workshop Item (Paper)
Uncontrolled Keywords:HIS, Polymeric substrate, printed dipole, reconfigurable beam direction
Subjects:T Technology > TK Electrical engineering. Electronics Nuclear engineering
Divisions:Electrical Engineering
ID Code:73029
Deposited By: Muhammad Atiff Mahussain
Deposited On:22 Nov 2017 12:07
Last Modified:22 Nov 2017 12:07

Repository Staff Only: item control page