Items where Division is "Mechanical Engineering" and Year is 2008

Jamaludina, K. R. and Muhamad, N. and Ab. Rahman, M. N. and Amin, S. Y. M. and Murtadhahadi, I and Ismail, M. H. (2008) Injection molding parameter optimization using the Taguchi method for highest green strength for bimodal powder mixture with SS316L in PEG and PMMA. Advances in Powder Metallurgy & Particulate Materials 2008, 1 . pp. 186-194.

A. Rashid, Ahmad Safuan and Kassim, Khairul Anuar and Katimon, Ayob and Md. Noor, Norhazilan (2008) Determination of plastic limit of soil using modified method. Malaysian Journal of Civil Engineering, 20 (2). pp. 295-305. ISSN 1823-7843

A. Rasid, Zainudin (2008) Finite element method in the thermal buckling analysis of Anisotropic Plates. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 105-123. ISBN 978-983-52-0563-7

Abd Elaziz, Mohamed Shaheed Faisal (2008) Pitch attitude control of a satellite system using active force control with fuzzy logic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Kader , Ab. Saman and Abdul Jamal, Hamzah (2008) Development a fuzzy expert system package for development planning of a container terminal. In: Advances in Marine Technology. Penerbit UTM , Johor, pp. 19-36. ISBN 978-983-52-0548-4

Abd. Karim, Mohd. Fauzi (2008) Corrosion behavior of deformed steel for automobile parts in various environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahim, Erween and Kamdani, Kamaruddin and Sharif, Safian (2008) Performance evaluation of uncoated carbide tool in high speed drilling of Ti6Al4V. Journal of Advanced Mechanical Design, Systems and Manufacturing, 2 (4). pp. 522-531. ISSN 1881-3054

Abd. Rahman, Roslan and Tamin, Mohd. Nasir and Kurdi, Ojo (2008) Stress analysis of heavy duty truck chasis as a preliminary data for its fatigue life prediction using FEM. Jurnal Mekanikal (26). pp. 76-85. ISSN 0127-3396

Abdelrhman, Ahmed Mohammed (2008) Assessment of geometrical dimension and tolerance of FDM part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Ali, Mohd. Fawzi and Mohammad Said, Mohd. Farid and Said, Mazlan (2008) Performance and emission evaluations of a prototype stepped-piston engine using carburetor and direct fuel-injection systems. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 89-104. ISBN 978-983-52-0550-7

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Said, Mazlan (2008) Evaluation on the potential of Ethylene as fuel for internal combustion engines. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Abdul Ghani, Mohamad Pauzi and Abdul Rahim, M. N. (2008) The prediction of wake wash in the towing tank. Jurnal Mekanikal (26). pp. 129-140. ISSN 0127-3396

Abdul Ghani, Mohamad Pauzi and Julait, J. (2008) Prediction of added resistance of ship due to regular head waves. Jurnal Mekanikal (26). pp. 1-8. ISSN 0127-3396

Abdul Hamid, M. F and S., Li and Basaran, C. (2008) Thermomigration in lead-free solder joints. International Journal of Materials and Structural Integrity, 2 (1-2). pp. 11-34. ISSN 1745-0055

Abdul Jamal, Hamzah and Ahmad, Mohd. Zamani and Abd. Kader, Ab. Saman (2008) Critical issues in technology transfer on the Malaysian shipbuilding industry. In: Advances in Marine Technology. Penerbit UTM , Johor, p. 199. ISBN 978-983-52-0548-4

Abdul Kadir, Mohammed Rafiq and Haron, H. and Kamsah, N. and Nordin, N. (2008) Miniplates orientation for fracture fixation of the mandibular condyle. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 438-441. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Aminullah, M. A. (2008) Finite element study of metacarpophalangeal joint silicone implants. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 420-423. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Sabudin, H. (2008) Stability of talus component in total ankle arthroplasty. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 453-456. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and N. , Kamsah and M. , Salim (2008) Effect of metal back geometry on the stability of cementless acetabular cup. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 410-413. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Kamsah, N. and Aziz, Z. (2008) Eccentric loading on the tibial plate after knee replacement. In: IFMBE Proceedings. Springer Berlin Heidelberg, Germany, pp. 403-406. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Osman, K. and Zainuddin, A. I. (2008) The use of mechanical interlock in dental prosthesis. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 457-460. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Syahrom, A. and Yusof, M. A. R. and Kamsah, N. (2008) Micro-modelling and analysis of actual and idealised cancellous structure. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 433-437. ISBN 1680-0737

Abdul Kadir, Mohammed Rafiq and Taib, I. and Osman , K. and Abdul Hamid, M. H. (2008) Blood flow simulation of stented aneurysm model. In: IFMBE Proceedings. Springer Berlin Heidelberg, pp. 398-402. ISBN 1680-0737

Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Supriyo, Bambang and Said, Mazlan (2008) Viability study of ethylene (C2H4) as an alternative fuel for gasoline engine. Jurnal Mekanikal (26). pp. 151-161. ISSN 0127-3396

Abdul Malik, Adi Maimun and Priyanto, Agoes and Khairul Anuar, Khairul Anuar (2008) Manoeuvring control for pusher barge in restricted water. In: Advances In Marine Technology. Penerbit UTM, Johor, pp. 129-150. ISBN 978-983-52-0548-4

Abdul Rahman, Mohd. Rosdzimin (2008) Cubic interpolated pseudo particle (CIP) - lattice boltzmann scheme for the simulation of natural convection heat transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Roslan and Tamin, Mohd. Nasir and Kurdi, Ojo (2008) Effect of child model size and mesh refinement to the sub modeling techniques result accuracy in finite element analysis. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 143-158. ISBN 978-983-52-0549-1

Abdul Raman, Norazmein and Jamaludin, Khairur Rijal (2008) Implementing Toyota Production System (TPS) concept in a small automotive parts manufacturer. ICME 2008 . (Unpublished)

Abdul Salaam, Hadi (2008) A simulation study in an automotive part manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Wahid, Mazlan and Ujir, Mohd Hafis and B, Azwan (2008) Effect of inlet section on pulse combustor performance. Jurnal Teknos-2K, 8 (1). pp. 9-14. ISSN 1411-4151

Abdul Wahid, Mazlan and Mat Zin, Ahmad Faiz and Ujir, Mohd. Haffis and Bahsan, Rosnadiah (2008) Diffusive thermal instability in premixed flame. In: Advances in Mechanical Engineering. Penerbit UTM , Johor. ISBN 978-983-52-0552-1

Abdul Wahid, Mazlan and Ujir, Abdul Haffis (2008) High speed combustion of gaseous hydrocarbon fuels. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 33-74. ISBN 978-983-52-0549-1

Abdul-Kadir, Mohammed Rafiq and Ulrich, Hansen and Ralf, Klabunde and Duncan, Lucas and Andrew, Amis (2008) Finite element modelling of primary hip stem stability: The effect of interference fit. Journal of Biomechanics, 41 (Issue 3). 587-594 . ISSN 0021-9290

Abdullah, M. Y. H. and Hussein, Mohamed and Md. Zain, Mohd. Zarhamdy and Ahmad, R. and Ganesh, R. (2008) Effect of transducer mass on thin plate vibration. In: Proceedings - International Symposium on Information Technology 2008, ITSim. Institute of Electrical and Electronics Engineers, New York, 2852 -2858. ISBN 978-142442328-6

Abidin, Ummikalsom and Mohd. Ghazali, Normah (2008) Entropy generation minimization analysis of a microchannel. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Abu Bakar, Abd. Rahim and Ouyang, Huajiang (2008) A prediction methodology of disk brake squeal using complex eigenvalue analysis. International Journal of Vehicle Design, 46 (4). pp. 416-435. ISSN 0143-3369

Abu Bakar, A. R. and Ouyang, Huajiang (2008) Wear prediction of friction material and brake squeal using the finite element method. Wear, 264 (11-12). pp. 1069-1076. ISSN 0043-1648

Abu Bakar, Abd. Rahim and Ouyang, Huajiang (2008) Recent studies of car disc brake squeal. In: New Research on Acoustics. Nova Science Publishers, Inc, New York, pp. 159-196. ISBN 978-1-60456-403-7

Abu Bakar, Saiful Anuar and Jamaluddin, H. and Rahman, R. A. and Samin, P. M. and Hudha, K. (2008) Vehicle ride performance with semi-active suspension system using modified skyhook algorithm and current generator model. International Journal of Vehicle Autonomous Systems, 6 (3/4). pp. 197-221. ISSN 1471-0226

Abu Bakar, A. R. (2008) Disc brake squeal: a prediction methodology. Technical Report. Vdm Verlag Dr. Muller.

Adnan, Faizul Amri and Hironori, Yasukawa (2008) Experimental investigation of wave-induced motions of an obliquely moving ship. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Shaharoun, A. M. (2008) The evaluation methods of disassemblability for automotive components - a review and agenda for future research. Jurnal Mekanikal (26). pp. 49-62. ISSN 0127-3396

Agung Purniawan, Agung Purniawan (2008) Deposition and characterization of polycrystalline diamond coated on silicon nitride and tungsten carbide using microwave plasma assisted chemical vapour deposition technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Robiah and Jamaluddin, Hishamuddin and Hussain, Mohd. Azlan (2008) Application of memetic algorithm in modelling discrete-time multivariable dynamics systems. Mechanical Systems and Signal Processing, 22 (7). pp. 1595-1609. ISSN 0888-3270

Ahmad, A. and Md. Zain, Mohd. Zarhamdy and Abu-Bakar, Abd. Rahim and Abd. Ghani, Badri and Abdul Rahman, Roslan and As’arry, Azizan (2008) Application of input shaping control strategy for reducing chatter noise in the automotive wiper system. In: Proceedings - International Symposium on Information Technology 2008, ITSim. IEEE, New York, pp. 2681-2685. ISBN 978-142442328-6

Ahmad, Mohd. Fauzy (2008) Preliminary structural design and analysis of a microturbine combustor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Nurulnatisya (2008) Development of fast craft seakeeping design methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, R. and Che Omar, M. B. and Yaacob, Mohd. Shafik and Hussein, M. and Md. Zain, M. Z. (2008) Modeling of human motion through motion captured data. In: Proceedings - International Symposium on Information Technology 2008, ITSim. Institute of Electrical and Electronics Engineers, New York, 2070 -2076. ISBN 978-142442328-6

Ahmad, R. R. and Yaacob, Mohd Shafik and Che Omar, M. B. (2008) Kinematics modeling of human motion using system identification technique. In: Proceedings - 2nd Asia International Conference on Modelling and Simulation, AMS 2008. Institute of Electrical and Electronics Engineers, New York, 338 -343. ISBN 978-076953136-6

Ahmad @ Mohamad, Md. Fauzi (2008) Development of quality improvement framework based on Japanese practices for electrical and electronics industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Alwi, Ahmad Afzan (2008) Drilling of stainless steel AISI 630 H1075 using different type of TiAIN carbide drill. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Sabki, Ahmad Fuaad (2008) Designing for competitive advantage : the primary factor for the future of the Malaysian. In: Advances in Marine Technology. Penerbit UTM , Johor, pp. 177-198. ISBN 978-983-52-0548-4

Ali, M. and Hamzah, E. and Abbas, T. and Mohd Toff, M.R.H. and Qazi, I.A. (2008) Macrodroplet reduction and growth mechanisms in cathodic arc physical vapor deposition of TiN films. Surface Review and Letters , 15 (5). pp. 653-659. ISSN 0218625X

Ali, Md. Liakat (2008) Impact on bus superstructure due to rollover. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Nor Merlisa (2008) A study on velocity profile in pump impeller and its casing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Juliawati (2008) Biotribocorrosion performance of titanium alloy Ti-6AI-4V and stainless steel 316l under simulated body environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Almabruk Shatewi, Abdurahim (2008) Techno-economics of rainwater harvesting technology for domestic usage and cooling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ammoo, Mohd. Shariff and Mohd. Nayan, Mohd. Idham (2008) Development of UTM 4-seater helicopter plugue. In: Selected Topics in Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 133-144. ISBN 978-983-52-0542-2

Ammoo, Mohd. Shariff and Mohd. Nayan, Mohd. Idham and Hussain, Mohd. Nasir (2008) Conceptual design of UTM 4-seater helicopter. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ani, Farid Nasir and Sarif, Safuwan (2008) Continuous conversion of biomass to biocoal. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 97-106. ISBN 978-983-52-0549-1

As'arry, A. and Md. Zain, M. Z. and Hussien, M. and Mailah, Musa and Abdullah, M. Y. and Ahmad, R. and Kazi, S. (2008) Development of hand-arm model rig for tremor excitation. In: Proceedings - International Symposium on Information Technology 2008, ITSim .

Asral, Asral (2008) Flow structure downstream of a 2-D bluff body due to wind flow with the effect of underneath wavy surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Awang, I. M. and C., Y. Leong and Abu Bakar, Abd. Rahim and Abdul Ghani, Badri and Abd. Rahman, Roslan and Md. Zain, Mohd. Zarhamdy (2008) Modeling and simulation of automotive wiper noise and vibration using finite element method. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Baharin, Nor Hatini (2008) Effect of accelerometer mass on thin plate vibration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahsan, Rosnadiah (2008) Diffusive thermal instability in premixed flame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Basaran, C. and Li, S. and Abdul Hamid, M. F. (2008) Thermomigration induced degradation in solder alloys. American Institute of Physics, 103 (12). pp. 1-9. ISSN 1070-664X

Belova, Irina V. and Murch, Graeme E. and Fiedler, Thomas and Öchsner, Andreas (2008) The lattice Monte Carlo method for solving phenomenological mass and thermal diffusion problems. Defect and Diffusion Forum , 279 . pp. 13-22. ISSN 1012-0386

Cha Sidik, Nor Azwadi and Osman, Kahar and Khudzairi, Ahmad Zahran and Ngali, Zamani (2008) Numerical investigation of lid-driven cavity flow based ontwo different methods: lattice boltzmann and splitting method. Jurnal Mekanikal (25). pp. 1-8. ISSN 0127-3396

Che Kar, Suriani (2008) Pressure analysis in point contact for elastohydrodynamic lubrication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidik, Nor Azwadi and Rosdzimin, A. R. M. (2008) Simulation of natural convention heat transfer in an enclosure using lattice boltzmann method. Jurnal Mekanikal (27). pp. 42-50. ISSN 0127-3396

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2008) Simplified finite difference thermal lattice Boltzmann method. International Journal of Modern Physics B, 22 (22). pp. 3865-3876. ISSN 0217-9792

Chiew, Y. S. and Jalil, A. M. K. and Hussein, M. (2008) Kinematic modeling of driving simulator motion platform. In: Proceedings of the 2008 IEEE Conference on Innovative Technologies in Intelligent Systems and Industrial Applications, CITISIA. Institute of Electrical and Electronics Engineers, New York, 30 -34. ISBN 978-142442416-0

Da Silva, Lucas F. M. and Ochsner, Andreas (2008) Special topic issue on structural adhesive joints. International Journal of Adhesion and Adhesives, 28 (8). pp. 391-392. ISSN 0143-7496

Darus, Amer Nordin and Yap, Yip Fatt (2008) Development of secondary flow in a curved rectangular duct. Jurnal Mekanikal (27). pp. 1-22. ISSN 0127-3396

Darus, Amer Nordin (2008) An improved scheme for parabolic flow along a curved rectangular duct. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0541-5

Darus, Amer Nordin and Yap, Yitt Fatt (2008) Effect of aspect ratio (g) and curvature ratio (HD/RO) on the occurrence of dean instability for the flow along a curved rectangular duct. In: Advances in Mechanical Engineering. Penerbit UTM , Johor, pp. 185-226. ISBN 978-983-52-0552-1

Daud, Mohd. Yusof and Lucas, Margaret (2008) Estimanation of interface friction during radial ultrasonic compression using finite element modelling. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 42-61. ISBN 978-983-52-0563-7

Eldrainy, Yehia A. and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin (2008) Numerical investigation of the flow inside primary zone of tubular combustor model. Jurnal Mekanikal (26). pp. 162-176. ISSN 0127-3396

Eldrainy, Yehia A. and Muhamad Ridzwan, Johann Jeffrie and Mohd. Jaafar, Mohammad Nazri (2008) Prediction of the flow inside a micro gas turbine combustor. Jurnal Mekanikal (25). pp. 50-63. ISSN 0127-3396

Farid, Ali Akhavan (2008) Surface integrity of Inconel 718 during drilling operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fiedler, Thomas and Öchsner, Andreas (2008) On the anisotropy of adhesively bonded metallic hollow sphere structures. Scripta Materialia , 58 (8). 695 -698. ISSN 1359-6462

Fiedler, Thomas and Öchsner, Andreas and Belova, Irina V. and Murch, Graeme E. (2008) Recent advances in the prediction of the thermal properties of syntactic metallic hollow sphere structures. Advanced Engineering Materials, 10 (4). 361 -365. ISSN 1438-1656

Fiedler, Thomas and Öchsner, Andreas and Belova, Irina V. and Murch, Graeme E. (2008) Thermal conductivity enhancement of compact heat sinks using cellular metals. Diffusion In Solids And Liquids III, 273 . 222 -226. ISSN 1012-0386

Fiedler, Thomas and Solorzano, Eusebio and Ochsne, Andreas (2008) Numerical and experimental analysis of the thermal conductivity of metallic hollow sphere structures. Materials Letters , 62 (8-9). pp. 1204-1207. ISSN 0167-577X

Fiedler, T. and Ochsner, Andreas (2008) Experimental analysis of the flexural properties of sandwich panels with cellular core materials. Materials Science and Engineering Technology, 39 (2). pp. 121-124. ISSN 0933-5137

Habeed Mohd. Abd Settar, Nurudin (2008) Thermal performance of a thermoacoustic stack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Esah and Kanniah, M. and Harun, Mohamad Kamal (2008) Effect of chromium addition on microstructure and creep strength of as-cast Ti-48Al alloy. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 483-48 (1-2 C). 555 -559 . ISSN 0921-5093

Hamzah, Esah and Khoo, Chun Yong and Sudin, Izman (2008) Core drilling of hard and brittle materials with rotary ultrasonic machine. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 75-96. ISBN 978-983-52-0549-1

Hasan, Mohd. Faizal and Takanobu, Yamada (2008) Performance analysis of cogeneration system using biogas from sewage fermantation. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0541-5

Hassan, Adnan (2008) Classification of Shewhart X-bar control chart patterns using artificial neural network. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 93-108. ISBN 978-983-52-0557-4

Ho, Fu Haw (2008) Production scheduling system for job shop enterprise using ANT colony optimization approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, S. M. H. and Merkel, Markus and Augustin, Christian B. and Öchsner, Andreas (2008) Numerical prediction of the effective thermal conductivity of perforated hollow sphere structures. Defect and Diffusion Forum, 283 . 6 -12. ISSN 1012-0386

Hudha, Khisbullah and Jamaluddin, Hishammudin and Mohd. Samin, Pakharuddin (2008) Disturbance rejection control of a light armoured vehicle using stability augmentation based active suspension system. International Journal of Heavy Vehicle Systems , 15 (2-4). 152-169 . ISSN 1744-232X

Hussein, Ahmed Yussuf (2008) Development of product life-cycle cost analysis tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibn Awal, Zobair and Islam, M. Rafiqul (2008) A study on ship capsizing due to collision. Jurnal Mekanikal (26). pp. 22-36. ISSN 0127-3396

Ibrahim, Ahmad Azlan Shah and Mohd. Jaafar, Mohammad Nazri (2008) Power estimation for four seater helicopter. Jurnal Mekanikal (27). pp. 78-90. ISSN 0127-3396

Idris, Siti Rabiatull Aisha (2008) Interfacial reactions during soldering of Sn-Ag-Cu lead free solders on immersion silver and electroless nickel/ immersion gold surface finishes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Iskandar Shah and Mansor, Shuhaimi and Mat Lazim, Tholudin (2008) Experimental research on helicopter tail shake phenomenon. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ishak, Iskandar Shah and Mat Lazim, Tholudin and Mansor, Shuhaimi (2008) Wind tunnel tests on a generic eurocopter 350Z helicopter. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Ishak, Mohmad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2008) The influence of orifice insertionin radial swirling flow for low emissions combustion. Jurnal Mekanikal (26). pp. 96-106. ISSN 0127-3396

Islam, M. Rafiqul and Awal, Zobair and Maimun, Adi (2008) Development of a mathematical model for analysis on ship collision dynamics. WSEAS Transactions on Applied and Theoretical Mechanics, 9 (3). 819 - 834. ISSN 1991-8747

Islam, M. Rafiqul and Jasmi, Mohammad Naim (2008) Drift forces of FPSO in regular waves. In: Advances in Marine Technology. Penerbit UTM , Johor, pp. 51-66. ISBN 978-983-52-0548-4

Jamaluddin, Khairur Rijal and Muhamad, Norhamidi and M. Ami, Sri Yulis (2008) Metal Injection Moulding (MIM) feedstock preparation with dry and wet mixing : a rheological behaviour investigation. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 76-93. ISBN 978-983-52-0563-7

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ismail, Muhammad Hussain and Ibrahim, Murtadhahadi (2008) Particle size and injection temperature effect on the injection molding of SS316l powder. Journal of Mechanical Engineering , 5 (1). pp. 59-71. ISSN 1823-5514

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd. Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) Analisis taburan saiz partikel serbuk SS316L bagi kegunaan proses penyuntikan acuan logam. In: Seminar I - AMReG 08, 12th June 2008, Seremban, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd. Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) Kajian prestasi penyahikatan larutan dengan menggunakan kaedah taguchi. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd. Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) Pengaruh tekanan penyuntikan, suhu penyuntikan dan beban serbuk terhadap ketumpatan jasad anum: analisis varian. In: Seminar I - AMReG 08, 12 June 2008, Seremban, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd. Nizam and M. Amin, Sri Yulis and Murtadhahadi, Ibrahim (2008) Pengoptimuman parameter pengacuan bagi mengurangkan kecacatan jasad anum proses pengacuan suntikan logam (MIM). The Journal of The Institution of Engineers, Malaysia, 69 (2). pp. 40-46. ISSN 0126-513X

K., Li Wei and Mat Saman, Muhamad Zameri and L., Meng Chiao (2008) Development of green design framework for Malaysian automotive industries. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kah Poh, Alan Chan and Yuan, Cheng See and Mat Yamin, Ahmad Kamal and Jalaluddin, Ainil Jesita and Ishak, Iskandar Shah and Mansor, Shuhaimi (2008) Effect of surface roughness on drag of loggerhead carapace. Jurnal Mekanikal (26). 37 - 48. ISSN 0127-3396

Kamaruzaman, Natrah (2008) Analysis of pulse combustor for drying purpose. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamitani, S. and Nakanisi, K. and Syahrullail, S. (2008) Improvement of surface roughness of aluminum products by the micro-grooves on tool surface in cold extrusion. Keikinzoku/Journal of Japan Institute of Light Metals, 58 . pp. 111-116. ISSN 0451-5994

Kazi, Suhail and As'arry, Azizan and Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and Mat Darus, Intan Zaurah (2008) Biodynamic response of the human hand-arm models under vibration. In: ACMOS '08: Proceedings Of The 10Th Wseas International Conference On Automatic Control, Modelling And Simulation. Electrical And Computer Engineering . World Scientific And Engineering Acad And Soc, Athens, Grece, pp. 237-242. ISBN 978-960-6766-63-3

Khoo, C. Y. and Hamzah, Esah and Sudin, Izman (2008) A review on the rotary ultrasonic machining of advanced ceramics. Jurnal Mekanikal (25). pp. 9-23. ISSN 0127-3396

Krishnan, S. and Lee, Choong Won (2008) Development of a 100-n hydrogen peroxide rocket engine. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kuan, Yew Wong and Abdul Salaam, Hadi (2008) Discrete-event simulation of an automotive part manufacturing INE. In: Advances In Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 109-128. ISBN 978-983-52-0557-4

Kurdi, Ojo and Abd. Rahman, Roslan and Tamin, Mohd. Nasir (2008) Stress analysis of heavy duty truck chassis using finite element method. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Kurniawan, Denni (2008) Tool life and surface integrity when hard turning stainless steel using wiper coated carbide tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lai, J.C. and Ani, F.N. and Hassan, A. (2008) Water absorption of lignocellulosic phenolic composites. Polymers and Polymer Composites , 16 (6). pp. 379-388. ISSN 09673911

Lai, Zheng Bo and Kamsah, Nazri (2008) Deformation and stresses in electronic package due to thermal cycling. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Lazim, Azrina (2008) An optimization of tin plating process using design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Xin Yi (2008) Development and characterisation of continuous fast pyrolysis of oil palm shell for bio-oil production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lotfabadi, Amir Fereidouni (2008) Investigation on quality of hydroxyapatite adhesion on investment casting mould. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M. Saqr, Khalid and Abdul Wahid, Mazlan and Che Sidik, Nor Azwadi (2008) On the use of Boltzmann quation in the mathematical modelling of gaseous detonations. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, p. 201. ISBN 978-983-52-0549-1

Mahat, Mohamad Mazwan (2008) The effect of stents structural parameters to flow in stented aneurysms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa and Hashemi-Dehkordi, S. M. and Abu Bakar, A. R. (2008) Brake squeal control using AN active technique. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 41-58. ISBN 978-983-52-0550-7

Mailah, Musa and Lim, Boon Han (2008) Biometric signature verification. In: Advances in Mechanical Engineering Part II. Penerbit UTM , Johor, pp. 165-184. ISBN 978-983-52-0552-1

Mailah, Musa and Lim, Boon Han (2008) Biometric signature verification using pen position, time, velocity and pressure parameters. Jurnal Teknologi A (48A). pp. 35-54. ISSN 0127-9696

Mansor, Shuhaimi and Perumal, Kannan (2008) Development of a flight Dynamics Engineering Simulator (FDES) at Universiti Teknologi Malaysia : an overview. In: Selected Topics In Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 33-53. ISBN 978-983-52-0542-2

Mansour, M. Khamis and Musa, Md. Nor and Wan Hassan, Mat Nawi (2008) Thermoeconomic optimization for a finned-tube evaporator configuration of a roof-top bus air-conditioning system. International Journal of Energy Research, 4 (2). pp. 1-16. ISSN 1099-114X

Mansour, M. Khamis and Musa, Md. Nor and Wan Hassan, Mat Nawi and Saqr, Khalid M. (2008) Development of novel control strategy for multiple circuit, roof top bus air conditioning system in hot humid countries. Energy conversion and management, 49 (6). pp. 1455-1468. ISSN 0196-8904 (In Press)

Masood, Ibrahim and Hassan, Adnan (2008) Application of full factorial experiment in designing an ANN-based control chart pattern recognizer. In: Advances in Mechanical Engineering. Penerbit UTM , Johor, pp. 107-120. ISBN 978-983-52-0591-0

Mat Darus, Intan Zaurah and Mohd. Hashim, Siti Zaiton and Tokhi, M. O. (2008) Interactive framework for dynamic modelling and active vibration control of flexible structures. Jurnal Mekanikal (25). pp. 24-38. ISSN 0127-3396

Mat Junoh @ Yunus, Muhammad (2008) Development of activated carbon for textile wastewater bioremediation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, Muhamad Zameri and Blount, Gordon (2008) The DFEL value methodology: a tool for design-for-environment in automotive industry. Jurnal Mekanikal (27). pp. 23-41. ISSN 0127-3396

Mat Saman, Muhamad Zameri (2008) End-of-life vehicle directive : a new paradigm in modern vehicle design and development process. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 129-162. ISBN 978-983-52-0557-4

Mat Tokit, Ernie (2008) Design optimization of a fixed bed biomass gasifier of a two stage incinerator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Padzi, Mahfodzah (2008) Biotribocorrosion performance of high carbon and low carbon CoCrMo under simulated human body fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, M. Z. and Mailah, Musa and Priyandoko, G. (2008) Active force control with input shaping technique for a suspension system. Jurnal Mekanikal (27). pp. 91-104. ISSN 0127-3396

Mishuris, Gennady S. and Miszuris, Wiktoria and Öchsner, Andreas (2008) Evaluation of transmission conditions for thin reactive heat-conducting interphases. Defect and Diffusion Forum, 273 . 394 -399. ISSN 1012-0386

Mohamad, Ahmad Kamely (2008) Performance of cubic boron nitride and mixed ceramics tools when hard turning tool steel. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohamed Kamar, Haslinda and Senawi, Mohd. Yusoff (2008) Empirical Correlations for the Sir-Side Steady-State Performance of a cooling coil in an automotive air conditioning system. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Mohammed, Akmal Nizam (2008) Swirl flow in combustion chambers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, Normah and Satar, Nurudin (2008) Analysis of thermo acoustic stack geometry. In: Advances In Mechanical Engineering 2008 Part I. Penerbit UTM , Johor, pp. 129-142. ISBN 978-983-52-0549-1

Mohd. Jaafar, Mohammad Nazri and Kimsin, Intan Noryanah and Rahmat, Mohd. Zaki Yamani and Wahab, Mohd. Muzamil and Abdul-Latif, Ainullotfi and Wan Ali, Wan Khairuddin and Mat Yajid, Zuriana Mariati (2008) Burning rate studies on solid propellant. In: Selected Topics In Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 79-94. ISBN 978-983-52-0542-2

Mohd. Radzi, Abdul Qoiyum and Abdul Wahid, Mazlan and Osman, Kahar and Ujir, Mohd. Haffis (2008) Analysis of flow in pulse combustor tailpipe. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, n/a. ISBN 978-983-52-0541-5

Mohd. Rohani, Jafri and Mohd. Yusof, Sha'ri and Mohamad, Ismail (2008) Deriving success factors and quality and firm performance in statistical process control implementation : an Exploratory Factors Analysis (EFA) approach. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 67-92. ISBN 978-983-52-0557-4

Mohd. Sam, Abdul Rahman and Ishak, Mohd.Yunus and Abu Hassan, Shukur (2008) Fibre reinforced polymer composite in infrastructure application. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 15-30. ISBN 978-983-52-0569-9

Mohd. Sam, Abdul Rahman and Maslan, Mohammad Haidir and Ishak, Mohd. Yunus and Ismail, Yob Saed and Abu Hassan, Shukur (2008) Behaviour of carbon fibre reinforced polymer plate under tensile load. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 31-39. ISBN 978-983-52-0569-9

Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar and Hudha, Khisbullah (2008) Semi-active suspension for ride improvement using stability augmentation system control algorithm. Jurnal Mekanikal (26). pp. 86-95. ISSN 0127-3396

Mohd. Taib, Jamaludin and Lim, Pei Yin and Mohamad, Zulkepli (2008) Automated numerical control code generation using feature definition. In: Advances In Mechanical Engineering 2008. Penerbit UTM , Johor, pp. 159-174. ISBN 978-983-52-0549-1

Mohd. Yusof, Noordin and Mohd. Zainal, Affandi and Hendriko, Hendriko and Kurniawan, Denni (2008) Hard turning of cold work tool steel using wipper ceramic tool. Jurnal Mekanikal (25). pp. 92-105. ISSN 0127-3396

Mohieel El Dien Mansour Saqr, Khalid Mohammed (2008) Design and simulation of an exhaust based thermoelectric generator (TEG) for waste heat recovery in passenger vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mubarak, A. and Akhter, Parvez and Hamzah, Esah and Mohd. Toff, Mohd. Radzi and A. Qazi, Ishtiaq (2008) Effect of Coating Thickness on the Properties of TiN Coatings Deposited on Tool Steels using Cathodic ARC PVD Techique. Surface Review and Letters, 15 (4). pp. 401-410. ISSN 0218-625X

Mubarak, A. and Hamzah, E. and M. R. M., Toff (2008) Study of macrodroplet and growth mechanisms with and without ion etchings on the properties of TiN coatings deposited on HSS using cathodic arc physical vapour deposition technique. Materials Science and Engineering: A, 474 (1-2). pp. 236-242. ISSN 09215093

Muhamad, Norhamidi and Jamaludin, Khairur Rijal and M. Amin, Sri Yulis and Ab. Rahman, Mohd. Nizam (2008) Pemilihan bahan suapan bagi proses pengacuan suntikan logam berdasarkan kepada kajian sifat reologi. Jurnal Teknologi A (48A). pp. 19-34. ISSN 0127-9696

Muhamad, Norhamidi and Murtadhahadi, Murtadhahadi and Che Haron, Che Hassan and Sulong, Abu Bakar and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Mohamad Nor, Nor Hafiez (2008) Kesan suhu penyuntikan yang tidak optimum terhadap kecacatan jasad anum pada proses penyuntikan logam (MIM). In: Seminar AMREG 08, 12 Jun 2008, Seremban, Malaysia.

Muhamad, Norhamidi and Murtadhahadi, Murtadhahadi and Che Harun, Che Hassan and Sulong, Abu Bakar and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Mohamad Nor, Nor Hafiez (2008) Pembebanan serbuk yang optimum bagi bahan suapan daripada SS 316 L, PEG, PMMA dan AS bagi proses pengacuanan suntikan logam (MIM). In: Seminar I - AMReG 08, 12 June 2008, Seremban, Malaysia.

Nasir, Nazri and Olaf-Lehmann, Fritz and Bijl, Hester (2008) Forces integration and deformation modelling of the flapping wing insect : Calliphora Vicina. In: Selected Topics in Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 113-130. ISBN 978-983-52-0542-2

Ng, Teng Yong and Yeak, S. H. and Liew, Kim Meow (2008) Coupling of ab initio density functional theory and molecular dynamics for the multiscale modeling of carbon nanotubes. Nanotechnology , 19 (5). ISSN 0957-4484

Nor Azwadi, C. S. and Tanahashi, T. (2008) Development of 2-D and 3-D double-population thermal lattice boltzmann models. Matematika, 24 (1). pp. 53-66. ISSN 0127-8274

Ochsner, Andreas and Mishuris, Gennady (2008) A new finite element formulation for thin non-homogenous heat-conducting adhesive layers. Journal of Adhesion Science and Technology, 22 (13). pp. 1365-1378. ISSN 0169-4243

Oliveira, B. F. and Cunda, L. A. B. and Ochsner, Andreas and Creus, G. J. (2008) Comparison between RVE and full mesh approaches for the simulation of compression tests on cellular metals. Materials Science and Engineering Technology, 39 (2). pp. 133-142. ISSN 0933-5137

Olugu, Ezutah Udoncy and Wong, Kuan Yew (2008) Simulation study on lens manufacturing process flow. Second Asia International Conference on Modelling & Simulation . pp. 806-811. ISSN 978-0-7695-3136-6/08

Ong, Wei Rex (2008) Effects of chromium addition on fatigue crack growth behavior of titanium aluminides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Oshaghi, Safoura (2008) Study of interfacial reactions between lead-free solders and immersion silver finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osman, Kahar and Al Khaireed, Syed Muhammad Nasrul and Ariffin, Mohd. Kamal and Senawi, Mohd. Yusoff (2008) Dynamic modeling of stratification for chilled water storage tank. Energy Conversion and Management , 49 (11). 3270-3273 . ISSN 0196-8904

Osman, Saliza Azlina (2008) Intermetallic compound formation between Sn - 37Pb & Sn - Ag - Cu lead - free solders and immersion silver surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Kahar (2008) Study on basic properties of phase change material for thermal energy storage. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Othman, Muhammad Firdaus and Mat Zin, Ahmad Faiz (2008) Numerical evaluation of spiral counter flow heat tecirculating burner. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, pp. 99-104. ISBN 978-983-52-0541-5

Ourdjini, Ali and Mohamed Ariff, Hanim and Idris, Siti Rabiatul Aisha (2008) Effect of surface finish metallurgy on intermetallic compuands during soldering with tin-silver-copper solders. In: Advances in Mechanical Engineering. Penerbit UTM , Johor. ISBN 978-983-52-0552-1

Perumal, Kannan and Mansor, Shuhaimi (2008) A synthesis of an aircraft approach, landing & overrun. Jurnal Mekanikal (26). pp. 141-150. ISSN 0127-3396

Phen, Chiak See and Kuan, Yew Wong and Komarudin, Komarudin (2008) A technique for improving the max-min ant system algorithm. In: Proceedings of the International Conference on Computer and Communication Engineering 2008, ICCCE08: Global Links for Human Development. Institute of Electrical and Electronics Engineers, New York, 863-866 . ISBN 978-142441692-9

Priyandoko, Gigih and Musa, Mailah and Jamaluddin, Hishamuddin (2008) Practical implementation of skyhook and adaptive active force control to an automotive suspension system. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Priyanto, Agoes and Erwandi, Erwandi and Samudro, Samudro (2008) Surge forces of a FPSO at lee side of submerged plate in regular waves. Jurnal Mekanikal (26). pp. 63-75. ISSN 0127-3396

Priyanto, Agoes and Erwandi, Erwandi and Samudro, Samudro (2008) Surge forces of a FPSO at Lee side of submerged plate in regular waves. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Purniawan, A. and Hamzah, Esah and Mohd Toff, Mohd Radzi (2008) Surface roughness and morphology analysis using an atomic force microscopy of polycrystalline diamond coated Si3N4 deposited by microwave plasma assisted chemical vapor deposition. Diffusion and Defect Data Pt.B: Solid State Phenomena, 136 . pp. 153-160. ISSN 1012-0394

Putri, Nilda Tri and Mohd. Yusof, Sha'ri (2008) A review of quality engineering tools and techniques practices in Malaysia's and Indonesia's automotive industries and an agenda for future research. In: Proceedings of the 4th IEEE International Conference on Management of Innovation and Technology, ICMIT. Institute of Electrical and Electronics Engineers, New York, pp. 449-456. ISBN 978-142442330-9

Radwan, Ashraf Hafiz (2008) Computer integrated manufacturing systems. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, p. 241. ISBN 978-983-52-0557-4

Rahmat, Mohd. Zaki Yamani and Mohd. Jaafar, Mohammad Nazri and Abdul-Latif, Ainullotfi and Wan Ali, Wan Khairuddin and Mat Yajid, Zuriana Mariati and Kimsin, Intan Noryanah (2008) Propellant development for small rockets. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15 - 16 July 2008, Hotel Istana, Kuala Lumpur.

Raja Hamzah, Raja Ishak and Al-Balushi, Khamis R. and Mba, David U. (2008) Observations of acoustic emission under conditions of varying specific film thickness for meshing spur and helical gears. Journal of Tribology, 130 (2). pp. 1-12. ISSN 0742-4787

Raja Hamzah, Raja Ishak and Mba , D. (2008) Acoustic emission and specific film thickness (lambda) for spur gears. Insight , 50 . pp. 642-643. ISSN 1354-2575

Rajoo, Srithar and Botas, Ricardo Martinez (2008) Variable geometry mixed flow turbine for turbochargers: an experimental study. International Journal of Fluid Machinery and Systems, 1 (1). pp. 155-168. ISSN 1882-9554 online

Rajoo, Srithar and Martines-Botas, Ricardo (2008) Automotive turbocharging. In: Research on Vehicle Technologies. Penerbit UTM , Johor, pp. 1-22. ISBN 978-983-52-0550-7

Rajoo, Srithar and Martinez-Botas, Ricardo (2008) Mixed flow turbine research: a review. Journal of Turbomachinery, 130 (4). 044001-044012. ISSN 0889-504X

Ramlee, Norlaila (2008) Effect of pH, temperature and chloride concentrations on the corrosion behaviour of welded 316L stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Nabilah (2008) Identification of ground vehicle's aerodynamic derivatives using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rashiddy Wong, Freddawati (2008) Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saqr, Khalid M. and ElDrainy, Yehia A. and Musa, Md. Nor (2008) 3-D numerical study of the effect of fin discontinuity on heat transfer augmentation in pipes having internal longitudinal fins for turbulent compressible flow. Proceedings of the 1st International Meeting on Advances in Thermofluids . pp. 195-206. ISSN ISBN 978-983-9805-62-8

Saqr, Khalid M. and Musa, Md. Nor (2008) On the deployment of thermoelectric waste heat recovery in the Malaysian road transport sector. Proceedings of the 1st International Meeting on Advances in Thermofluids . pp. 234-241.

Saqr, Khalid M. and Mansour, M. Khamis and Musa, Md. Nor (2008) Thermal design of automobile exhaust based thermoelectric generators : objectives and challenges. International journal of automotive technology, 9 (2). pp. 155-160. ISSN 1229-9138

Saqr, Khalid M. and Musa, Md. Nor (2008) Simulation of a novel hot-side heat exchanger for automobile exhaust based thermoelectric generators using EFDlab. Jurnal Teknos-2K, 8 (1). pp. 17-26. ISSN 1411-4151

Sawarimuthu, Soosai and Mohd. Jaafar, Mohammad Nazri (2008) Performance of various biofuel blends on burner system. Jurnal Mekanikal (27). pp. 69-77. ISSN 0127-3396

See, Phen Chiak (2008) A hybrid ant colony algorithm for solving facility layout problems formulated as quadratic assignment problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

See, Phen Chiak and Wong, Kuan Yew (2008) Application of ant colony optimisation algorithms in solving facility layout problems formulated as quadratic assignment problems: a review. International Journal of Industrial and Systems Engineering, 3 (6). ISSN 1748-5037

Senawi, Mohd. Yusoff (2008) Numerical determination of efficiency of dry circular fin. In: Advances in Thermo-Fluids. Penerbit UTM , Johor, pp. 99-104. ISBN 978-983-52-0541-5

Shah Ishak, Iskandar and Mansor, Shuhaimi and Mat Lazim, Tholudin (2008) Helicopter tail shake phenomenon : experimental research. In: Selected Topics in Aeronautical Engineering Research. Penerbit UTM , Johor, pp. 97-110.

Shamsul, Sarip (2008) Model pepejal 3D. In: Lukisan Kejuruteraan dan Berbantu Konputer. Pearson, pp. 1-52.

Sharif, Safian and Mohruni, Amrifan Saladin and Jawaid, Ashraf (2008) Face milling of Titanium Alloy Ti-6246 using PVD-TiN coated carbide tools. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, pp. 203-208. ISBN 978-983-52-0557-4

Shidong, Li and Abdul Hamid, Mohd. F. and Basaran, Cemal (2008) Simulating damage mechanics of electromigration and thermomigration. Simulation: Transactions of The Society for Modelling and Simulation Int., 84 (8-9). pp. 391-401. ISSN 0037-5497

Shunpei, Kamitani and Kenji, Nakanishi and Syahrullail, S. (2008) Experimantal study of palm oil as lubricant in aluminum alloy forming process. In: Advances in Thermo-Fluids. Penerbit UTM , Johor. ISBN 978-983-52-0541-5

Suaib, N. M. and Sam, Y. M. (2008) Modeling and control of active suspension using pismic and SMC. Jurnal Mekanikal (26). pp. 119-128. ISSN 0127-3396

Suhasril, Andril Arafat (2008) Piston ring assembly of a new symmetrical multi-stage wobble-plate compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Muhamad Zuhairi (2008) Flow analysis of copd effects in human airways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tamin, Mohd. Nasir and Hamzah, Esah and Ong, Wei Rex (2008) Effects of chromium content on fatigue crack growth behavior of Ti-48Al-xCR alloys. In: 2nd Regional Conference on Vehicle Engineering & Technology, 15-16 Jul, 2008, Hotel Istana, Kuala Lumpur.

Tamin, M. N. and Sudin, I. and Mon, T. T. (2008) Thermal-mechanical responses of Ti-6Al-4V during orthogonal cutting process. Diffusion and Defect Data. Pt A Defect and Diffusion Forum, 273-276 . pp. 673-678. ISSN 1012-0386

Tan, Ming Jiun (2008) Effect of alumina-formers addition on the isothermal oxidation of TI-AL based intermetallics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tavakolpour, Ali Reza and Mat Darus, Intan Zaurah and Mailah, Musa (2008) Performance evaluation of finite difference and finite element methods applied to flexible thin plate for active vibration control. In: ACMOS '08: Proceedings Of The 10Th Wseas International Conference On Automatic Control, Modelling And Simulation. Electrical And Computer Engineering . World Scientific And Engineering Acad And Soc, Athens, Grece, pp. 230-236. ISBN 978-960-6766-63-3

Tawi, Kamarul Baharin (2008) Characterisation of an electromechanical clutch for continuously variable transmission (CVT) application. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Tri Putri, Nilda and Mohd. Yusof, Sha'ri (2008) A review of quality engineering tools and techniques practices in Malaysia's and Indonesia's automotive industries and an agenda for future research. In: Proceedings of the 4th IEEE International Conference on Management of Innovation and Technology, ICMIT , 21-24 Sept. 2008.

Vesenjak, Matej and Žunic, Zoran and Ren, Zoran and Öchsner, Andreas (2008) Computational study of heat transfer in honeycomb structures accounting for gaseous pore filler. Defect and Diffusion Forum, 273 . 699 -706. ISSN 1012-0386

Vesenjak, M. and Ren, Z. and Ochsner, Andreas (2008) Behaviour of cellular materials under impact loading. Materials Science and Engineering Technology, 39 (2). pp. 125-132. ISSN 0933-5137

Wan Hamid, Wan Harun and Loh, Chee Hong (2008) Development and implementation of radiofrequency identification (RFID) technology for inventory management system : a case study. Jurnal Mekanikal (27). pp. 51-68. ISSN 0127-3396

Winkler, R. and Merkel, M. and Öchsner, A. and Günter, W. (2008) On the vibration analysis of adhesively bonded hollow sphere structures. Materialwissenschaft und Werkstofftechnik , 39 (2). 139 -142. ISSN 0933-5137

Wong, Kuan Yew (2008) A theoretical model for knowledge management systems adoption in Malaysian small and medium enterprises (SMEs). Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Wong, Kuan Yew and Okfalisa, Okfalisa and Salim, Naomie (2008) A knowledge diagnostic system for product defects. International Conference on Innovative Production Machines and Systems . pp. 244-249.

Wong, Wai Peng and Wong, Kuan Yew (2008) A review on benchmarking of supply chain performance measures. Benchmarking, 15 (1). pp. 25-51. ISSN 1463-5771

Wong, Wai Peng and Wong, Kuan Yew (2008) A review on benchmarking of supply chain performance measures. Benchmarking , 15 . pp. 25-51. ISSN 1463-5771

Yaakob, Omar and Ibrahim, Zaharah and Priyanto, Agoes and Omar, Mohd. Shahir Shamir and Adnan, Faizul Amri and Hamdan, Salehuddin and Md. Salleh, Madihah and Abdul Wahap, Mohd. Arizam (2008) Biomechanics and hydrodynamics study od aquatic locomotion. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Yahya, M. Yazid and Cantwell, W. J. and Langdon, G. S. and Nurick, G. N. (2008) The blast behaviour of fiber reinforced thermoplastic laminates. Journal of Composite Materials, 42 (21). pp. 2275-2297. ISSN 1530-793X

Yeo, Eng Soon and Mohd. Ghazali, Normah (2008) Numerical simulation of a microchip cooling wth microjet array. Jurnal Mekanikal (25). pp. 39-49. ISSN 0127-3396

Yusof, Mohamad and Ani, Farid Nasir and Z.A., Zainal and Azman, M. (2008) Characterization of rice husk for cyclone gasifier. Journal of Applied Sciences, 8 (4). 622 - 628. ISSN 1996-3343