Universiti Teknologi Malaysia Institutional Repository

Browse by Type

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Number of items: 693.

Abd. Manan, Fazilah (2006) Achieving sustainable food industries: good practices in environmental management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Crysdian, Cahyo (2006) Active firewall mechanism as a comprehensive approach towards minimizing internet threats. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chong, Wah Kiat (2006) Active integrated antenna with image reject mixer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Ghani, Nor Maniha (2006) Active steering for vehicle system using sliding mode control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jamil, Nordayanti (2006) Activities incentives tracking system (AITS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Liew, Toh Yean (2006) Adaptation of urban infill housing towards malaysian city centre revitalisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment ; Urban and Regional Planning.

Ismail, Ahmad Yusri (2006) Adaptive neuro fuzzy modelling and vibration control of flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Akhir, Norliza (2006) The aggregate degradation characteristics of stone mastic asphalt (SMA) mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Palaraman, Robiahtuladawiah (2006) Alat bantu pembentukan kurikulum institusi pengajian tinggi, kajian kes fakulti sains komputer dan sistem maklumat, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammad, Noraini (2006) Alatan audit dokumentasi jaminan kualiti IPTA di FSKSM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Narayanan Nair, Purushothaman Nair (2006) Alternative design of foundations subjected to uplift for transmission line tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Norhidayah (2006) Amalan dan prestasi dalam perolehan elektronik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdul Rahman, Fazli (2006) Analisa terhadap rekabentuk bingkai kalibrasi bagi kamera digital untuk fotogrametri jarak dekat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering; Department of Geomatic Engineering.

Mohd. Saat, Sa'adiah (2006) Analisis untuk mengenalpasti risiko kejadian lubang benam menggunakan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Rahim, Shayfull Zamree (2006) Analyses of material flow in two and three-plate molds for mold design selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alisibramulisi, Anizahyati (2006) Analysis of corrugated web beam to column extended end plate connection using LUSAS software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Hipiny, Irwandi Hipni (2006) An analytical approach for simulating aerial perspective effects on distant objects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hamzah, Norhazimi (2006) Antilock braking control using robust control approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Kahar (2006) Aplikasi epembelajaran di dalam hidrografi : interaktif multimedia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Hamidi, Nadila (2006) Aplikasi pengurusan nilai dalam pengurusan ruang : kajian kes : Unit Ubahsuai, Bahagian Harta, Pejabat Harta Bina, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Subri, Syarul Haniz (2006) Aplikasi rangkaian neural dalam pengesanan simpang bagi penterjemah lakaran pintar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shamsuddin, Kamaruddin (2006) Aplikasi sistem sokongan perancangan dalam menentukan kesesuaian perletakan guna tanah industri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Chin, Kai San (2006) Application of fiber bragg grating sensors in monitoring civil engineering structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Mohd. Zamani (2006) The application of fuzzy expert system to preliminary development planning of medium size container terminal. PhD thesis, Universiti Teknologi Malaysia, Business Advances Technology Centre.

Jamaludin, Mohad Fuad (2006) The application of Hough Transform for corner detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Fathaddin, Muhammad Taufiq (2006) The application of lattice gas automata for simulating polymer injection porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Fathaddin, Muhammad Taufiq (2006) The application of lattice gas automata for simulating polymer injection porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Yip, Desmond Teck Wing (2006) The application of mapinfo in managing material and waste at construction sites. Masters thesis, Univeriti Teknologi Malaysia, Faculty of Civil Engineering.

Kung, Teck Li (2006) The application of MI pro in the management of air quality and noise pollution at construction sites. Masters thesis, Univeriti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Kamar, Fazleen Hanim (2006) The application of package plant system in upgrading the existing sewage treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zalil, Shahly Azly (2006) Application of quality function deployment in moulded fibre packaging design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Wiyono, Sugeng (2006) Application of road deterioration simulation model for prediciting initiation and progression of cracks on road pavement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Ahmed, Mohammad Masroor (2006) Application of speech recognition for information retrieval. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wan Mohamad, Wan Nor Farhana (2006) The application of Wagner whitin algorithm in material requirements plannning : a case study at deproteinised natural rubber factory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Ahmad, Wan Basiron (2006) The architect's duty of care in respect of design to third parties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nex Betin, Timothy (2006) Assessing cumulative watershed effects by zig-zag pebble count method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kho, Sui Ju (2006) Assessment criteria in a holistic scoring scale as a pedagogical tool in teaching english language argumentative essay writing in a Malaysian secondary school. Masters thesis, Universiti Teknologi Malaysia,Faculty of Education.

Ismail, Ilyani (2006) Assessment of safety level in performing building maintenance work in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Sallehan (2006) An assessment of the refurbishment contractors' service quality to clients at public institutions of higher education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ab. Wahab, Roswanira (2006) Asymmetric synthesis using sugars as homochiral auxiliaries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Al Muharrami, Khalid Zayed Mohammad (2006) Attenuation model for free space optics using latency measurements. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khan, Mohammad Shahbaz (2006) Automated information security compliance management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdullah, Rahimah (2006) Automated vehicle navigation system for various application using nios processor and altera FPGA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamuda, Esmael Ali Ramadan (2006) Automatic coronary artery detection in cardiogram image. Masters thesis, Universiti Techonologi of Malaysia, Faculty of Electrical Engineering : Electrical-Electronics & Telecommunication.

Ong, Heng Yau (2006) Behaviour of filled joint under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Dennis Paul Leong (2006) Behaviour of pinned beam-to-column connections for precast concrete frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Anis Salwa (2006) BER performance study of orthogonal frequency division multiplexing (OFDM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Paizi @ Fauzi, Wan Fariza (2006) BER performance study of PSK-based digital modulation schemes in multipath fading environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Prasetyoko, Didik (2006) Bifunctional oxidative and acidic titanium silicalite (TS-1) catalysts for one pot synthesis of 1,2-octanediol from 1-octene. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Chee Siang (2006) Biodegradation of oil and grease in upflow anaerobic sludge blanket reactor for palm oil mill effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Khye Liat (2006) Bowtie antenna for ground penetrating radar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering ; Electrical - Electronics and Telecommunication.

Yusuf, Shubanah (2006) Cadangan pengambilalihan pengurusan penyelenggaraan harta bersama Rumah Pangsa Kos Rendah oleh pihak berkuasa tempatan : kajian kes di kawasan pihak berkuasa tempatan Majlis Perbandaran Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Hosni, Nafisa (2006) Cadangan reka bentuk subsistem maklumat perundangan bagi pengurusan kawasan tanah bencah kajian kes: Tg. Piai & Sg. Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mak, Wai Kin (2006) California bearing ratio correlation with soil index properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tee, Zhen Cong (2006) Capacitance tomography measurement with USB interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nguee, Ching Seng (2006) Case studies on forensic structural engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tg. Jaya @ Tg. Yahya, Tengku Fazli (2006) A case study of Sg. Skudai in the comparison of river water quality models in total maximum daily load assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lau, Ai Ting (2006) A case study of the language learning strategies of successful and less successful ESL learners in a suburban school in Sibu, Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Julkarnain, Abdul Aziz (2006) A case study on concrete problems in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Istadi, Istadi (2006) Catalytic conversion of methane and carbon dioxide in conventional fixed bed and dielectric barrier discharge plasma reactors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Majid, Ibnu Abbas (2006) Causes and effect of delays in Aceh construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Razita (2006) Change management framework for software application development (BPM-IT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Moin, Mohamed Idrus (2006) Characterizing the awareness of values in ISI2020 system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Ghazali, Mohd. Nazlee Faisal (2006) Chiral resolution via solid matrix formation : fundamentals and novel applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah, Nur Humara' Lau (2006) Chromium(VI) biosorption studies using non-living microorganisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Noor, Norzailawati (2006) Classification of fused data for land use mapping in local plan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Adanan, Hadiatul Aida (2006) Client satisfaction on contractors' work performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elajeb, AbuObida Hassan (2006) Clustering chemical data set using adaptive resonance theory (ART) algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Rashid, A. Hafinaz (2006) Collaborative timesheet management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Che Amat, Rohayah (2006) Colonial garden characters of hill stations : a case study of Penang Hill, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Amri, Yul (2006) Combination of geodetic and geotechnical methods for deformation modeling by using of L1 - Norm and L2 - Norm estimations. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan dan Sains Geoinformasi.

Adnan, Fadhlillah (2006) Combined heat and power: cost effectiveness, prospects and technology for Malaysian pulp and paper industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering : Power.

Tam, Wee Kong (2006) Comfort analysis in commercial vehicle's passenger seat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

King, Shyang Sien (2006) Command shaping control of a crane system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Peranggi Pohan, Ikhwan (2006) A compact S-band front-end rectenna for wireless power transfer application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Md. Nasir (2006) Comparative stiffness analysis between conventional and IBS construction method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Norliza (2006) Comparing three methods of handling multicollinearity using simulation approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wahlan, Mohammed Salem Farag (2006) Comparison and fusion of retrieval schemes based on different structures, similarity measures and weighting schemes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chan, Chee Han (2006) Comparison between BS 5950: part 1: 2000 & Eurocode 3 for the design of multi-storey braced steel frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Mohd. Redzuan (2006) Comparison between predicted and observed settlement of vertical drain treated road embankment on soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Murugun @ Arokiasamy, Michael Angelo (2006) A comparison between static load test and high strain dynamic test on bored piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aziz Memon, Naeem (2006) Comparison between superpave gyratory and Marshall laboratory compaction methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Muhd. Harris (2006) A comparison of pile performance base on static formulas and dynamic load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raman, Selvem (2006) Comparison of predicted settlement behaviour to the field measurement of stone column improved ground. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

R. Alrowaimi, Mohamed Muftah (2006) The compressibility of fill subjected to applied stress and inundation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering ; Civil-Geotechnic.

Yulindasari, Yulindasari (2006) Compressibilty characteristics of fibrous peat soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sundaraj, Chandran (2006) Computational study of turbine blade film cooling performance using anisotropic turbulence models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ting, Hua Nong (2006) Computer - based malay speech articulation - phonological assessment system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Ali, Azmi (2006) Computer aided facilities management in the tender processing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Marjuki, Mofti (2006) Computerised building cost estimating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Safri, Abdullah (2006) Computerized and clustered detection and monitoring security system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Salleh @ Mohamed Salleh, Jazlan (2006) Construction of precast segmental box girder bridge using overhead gantry - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shim, Mong Heng (2006) Construction site safety: legal issues of liability for various parties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hamood Al-Harthy, Amur Salim (2006) The consultancy fee for structural design changes of reinforced concrete buildings in Oman. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Azreena (2006) Consultant appointment system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mukhtar, Muriati (2006) A contingency framework for analysing supply chain performance. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohmad Zainordi, Zainab (2006) Contractor's liability to third party for defective works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Saat, Mohd. Shakir (2006) Control of a cart-ball system : comparison between model based and fuzzy logic controllers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ujir, Hamimah (2006) Control points selection and storage for random moving objects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Tok, Hoon Seng (2006) Cooperative learning and achievement in english language acquisition in a literature class in a secondary school. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Tan, San San (2006) Corporate social responsibility of developers in product perspective. case study: Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Hasan, Muzamir (2006) The correlations of engineering characteristics of Johor coastal clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chew, We-sen (2006) Corrosion management of steel reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Zanariah (2006) Cots software product quality evaluation : guidelines for UniKL BMI. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

King, Yeong Ching (2006) Coverage performance of 3G radio network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lam, Chee Siang (2006) Criteria of acceptance for constant rate of strain consolidation test for cohesive soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Hafizawati (2006) Crushworthiness of polymeric foam used as core composite sandwich structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yow, Soon Keong (2006) The current practice and problems of contractual arrangement in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shamsudin, Adam (2006) Customer service and maintenance system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Setyawan, Dony (2006) Damage stability of small vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anjum Iqbal, Anjum Iqbal (2006) Danger theory metaphor in artificial immune system for system call data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zamri, Ruzaidi (2006) Database for computer - aided production management (CAPM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aripin, Syahida (2006) Database management inventory system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Toh, Leong Soon (2006) A deadbeat controller for bidirectional high-frequency link inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Palaniappan, Yogeswary (2006) Degradation of phenol by a catalytic ozonation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Mohd. Zamri (2006) Design and develop 3-way loudspeaker system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Syahrom, Ardiyansyah (2006) Design and development of multistage symmetrical wobble compressor. Masters thesis, Universiti Teknologi Malaysia.

Wan Ibrahim, Wan Abd. Rahman Assyahid (2006) Design and development of thermodynamics apparatus using design for manufacture and assembly (DFMA) methodology. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Noor, Mariyatul Qibthiyah (2006) Design and modeling of on-chip planar capacitor for RF application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Tee Neng (2006) Design and optimization of the scavenging system of a multi-cylinder two-stroke scotch-yoke engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngadimon, Khairulnizam (2006) Design and simulation of hydraulic shaking table. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chong, Wen Tong (2006) The design and testing of a wind turbine for electrical power generation in Malaysian wind conditions. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Ismail, Mohd. Izuan (2006) Design of an advanced encryption standard crypto-processor core for field programmable gate array implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Chun Khai (2006) A design of precision linear z-transverse antenna positioner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ashraf, Shameed (2006) Design, fabrication and testing of a single step pressure regulation system for natural gas motorcycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Alhabeeb, Habeeb Saleh (2006) Designing security framework for computer science Faculty of Al - Qassim University. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wan Abd Rahman, Wan Eny Zarina (2006) Detemining the multi-current sources of magnetoencephalography by using fuzzy topographic topological mapping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Ali, Wan Nordiana (2006) Determination of contract by contractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tay, Lee Yong (2006) Determination of contract by employer in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Muhammad Sofian (2006) Determination of optimum concentration of lime slurry for soil stabilisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Chier Fang (2006) Determination of silica aerogels nanostructure characteristics by using small angle neutron scattering technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Baker Sharif, Omer Abdel Razag Sharif (2006) Determination of the melting layer from meteorological radar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Abdul Rahman, Wan Eny Zarina (2006) Determining the multi-current sources of magnetoencephalography by using Fuzzy Topographic Topological Mapping. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Toh, Tien Choon (2006) Developing a construction industry web-based learning system in construction management education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Questelles, Kenroy Alexander (2006) Developing a stochastic model for partial discharge detection in voids of polymeric cable insulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bayoud, Mohamed. K. (2006) Developing information security policy : case study of Biruni Remote Sensing Center (BRSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chong, Wan Siang (2006) Developing prototype application for producing bills of quantities from microsoft excel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Rahman, Muhammad Syukri (2006) Development and characterization of carbon fiber from polyacrylonitrile precursor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jaafar, Juhana (2006) Development and characterization of sulfonated poly (ether ether ketone) membrane for direct methanol fuelcell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Othman, Mohd. Hafiz Dzarfan (2006) Development and characterization of sulfonated poly (ether ether ketone)/boron orthophosphate composite membrane for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Tan, Wee Chuen (2006) Development and evaluation of a web-based learning system based on learning object design and generative learning to improve higher-order thinking skills and learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ishak, Zam Zarina (2006) Development knowledge expert repository system for IT professionals at CICT, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chuang, Kuang Hong (2006) Development of a decision support system for drinking water treatment process design (WATER-DSS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dwi Agustina, Dwi Agustina (2006) Development of a generic framework for developing a quality management system (QMS) for small manufacturing organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Ida Laila (2006) Development of a PC interfaced blood pressure meter (e-BPMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sowndappan, Prakash (2006) Development of a real-time speaker recognition system using TMS320C31. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Maliki, Mohamad Nansah (2006) Development of a recognition system for human's arms motions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Su, Eileen Lee Ming (2006) Development of a room recognition system using a catadioptric sensor and artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Darby, Norazlinda (2006) Development of a software for analyzing non-normal distrubution data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Norazana (2006) Development of active statistical process control via different correlation coefficients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jalil, Abdul Rahim (2006) Development of adsorption selective carbon membrane using cellulose acetate for separation of O2/N2 and C1-C4 hydrocarbons/N2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Cecilia, Chuah Ying Shi (2006) The development of an Ajax Frontend Webmail application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chong, Sheau Hwey (2006) Development of an evaluation matrix of occupational safety and health management system for construction companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ab. Kadir, Muhamad 'Azmi (2006) Development of ASEAN Food Security Information System for Malaysia (AFSIS-MY) : an object-oriented approach using PHP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Junus, Mazlan (2006) Development of ASEAN Food Security Information System of Malaysia (AFSIS-MY) software requirements, testing and user training. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zakaria, Zainul Akmar (2006) Development of bacterial - based remediation system for the removal of chromium (V1) from electroplating industrial effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Irawan, Sonny (2006) Development of beneficiation technique for bentonite for applications in petroleum industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Rosli, Nor Habibah (2006) Development of biological treatment system for reduction of COD from textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

R. Periasamy, Jayaselvi (2006) Development of civil and structural consultant's performance evaluation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Azhar (2006) Development of common work breakdown structure (WBS) for school project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khoo, Hui Kiang (2006) Development of creep and shrinkage prediction model for Malaysian normal strength concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Berahim @ Ibrahim, Siti Khairizan (2006) Development of database management system (DBMS) based on elemental cost analysis (ECA) methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasbullah, Hasrinah (2006) Development of defect-free mindel S-1000 asymmetric membrane for gas separation through manipulation of dope formulation and rheological factor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

A. Harris, Arief Ruhullah (2006) Development of digital fitness test system with ECG features extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tamri, Anuar (2006) Development of electricity market modeling for Malaysia electricity supply industry (MESI) : competitive electricity markets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Atan, Mastura (2006) Development of gated communities in Klang Valley. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Tajuddin, Ramlah (2006) Development of hollow fiber ultrafiltration membrane reactor for palm oil mill effluent tertiary treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Wong, Tony Chee Siang (2006) Development of land based mobile mapping system using global positioning system and close range photogrammetric techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lim, Jian Wei (2006) Development of layered silicates montmorillonite filled rubber-toughened polypropylene nanocomposites (RTPPNC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Zainudin, Norazimar (2006) Development of Malaysian ocean wave database for engineering purposes using satellite altimetry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yap, Wei Ney (2006) Development of novel galactosylation method for the expression of recombinant human transferrin in insect cell culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ishak, Maizul (2006) Development of online speed trap system (DOSTS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering : Electrical - Electrical Power Dept..

Sharum, Mohd. Yunus (2006) The development of Perl Script distribution center portal at Malaysian Genome Institute (MGI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Awang, Mazlan (2006) The development of productivity improvement framework for Malaysian Hospitals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nurlida Basir (2006) The development of trustmatrix web service (phase 1) & testing of trustmatrix business edition version 2.0 for Scan Associates Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohd. Aras, Mohd. Shahrieel (2006) Dielectric resonator antenna design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Xia Sheng (2006) Direct loss and expense relating to remoteness of damages. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Rahman, Farah Adibah (2006) "Do it yourself moves and changes" PBXoIP system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Ali, Napsiah (2006) Doc - man : an integrated document manager. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Suhaimi (2006) A document-based software traceability to support change impact analysis of object-oriented software. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd., Sofian (2006) Dynamic analysis of a 10m diameter wind turbine rotor under maximum wind load of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Rehan, Muhammad Saifuddin (2006) Dynamic analysis of tramcar suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Paunoo @ Balu, Baldeve (2006) Dynamic scene occlusion culling in architectural scenes based on dynamic bounding volume. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sulaiman, Yusran (2006) Effect of catalysts and precursors in the synthesis of carbon nanotubes by catalytic chemical vapour deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kanniah, Maiiyeaalagan (2006) Effect of chromium addition on high temperature creep behaviour of titanium aluminides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yaakob, Harisun (2006) The effect of fermentation process on the diadzin and diadzein content in fermented soybean. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chang, Siu Hua (2006) Effect of injection characteristics on the throttle body injection mixer for compressed natural gas motorcycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wan Mansor, Wan Salida (2006) Effect of magnetic fields on heavy metal and nutrient removal in leachate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Maarof, Mohd. Rashidi (2006) The effect of nodularisation parameters on the quality of ductile iron. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Benson, Yannie (2006) Effect of raw water quality on coagulant dosage and optimum pH. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Bashah, Azli Shah (2006) Effect of silica fume to the strength and permeability of high performance ground granulated blastfurnace slag concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Karim, Siti Kartina (2006) Effect of temperature and hydrogen on palm oil cracking over MCM-41/ZSM-5 composite catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Idris, Nor Jalilah (2006) Effect of work programme in extension of time entitlement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sinang, Som Cit (2006) The effectiveness of different grass types for pollutants removal in level spreader system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yeo, Kee Jiar (2006) Effectiveness of intervention on reading readiness among kindergarten children. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ling, Tuong Thai (2006) The effects of bismuth, strontium and antimony additions on the microstructure and mechanical properties of A356 aluminium casting alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Rahman, Mukhlis (2006) Effects of fabrication conditions in the solvent-free coagulation process on the structural and mechanical properties of polyacrylonitrile/acrylamide fibers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Sin, Chock Tean (2006) The effects of fast rise multiple lightning impulse on the electrical breakdown characteristics of MOV. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Ing Siong (2006) The effects of fast rise multiple lightning impulse on the physical and LC Circuit Parameters of MOV. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering ; Electrical - Power.

Chong, Elizabeth Eu Mee (2006) The effects of nominal maximum aggregate size on the properties of hot mix asphalt using gyratory compactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ooi, Keng Boon (2006) The effects of TQM on employees' affective reactions in Malaysia semiconductor sub-contracting organizations. PhD thesis, Universiti Teknologi Malaysia.

Zamri, Muhamad Najib (2006) An efficient real-time terrain data organization and visualization algorithm based on enhanced triangle-based level of detail technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hamdan, Rohaiza (2006) Electric field study of silicon rubber insulator using finite element method (SLIM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Harihodin, Hezul Hezry (2006) Electronic dictionary production system (EDIPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Indraguna, Vannebula Eka (2006) Electronic fuel injection controller for natural gas vehicle motorcycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chiam, Kok Thiam (2006) Embedded system based solid-gas mass flow rate meter using optical tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saharin, Sanisah (2006) Emissions reduction from an oil burner by air staging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

July Usman, Rien Handarwati (2006) Empirical evidence, commercial performance and extended risk analysis of Indonesian petroleum production sharing contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Hamid Nour, Abdurahman (2006) Emulsion stability and microwave demulsification of crude oil emulsion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Nasution, Henry (2006) Energy analysis of air conditioning system using PID and Fuzzy logic controllers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nasution, Henry (2006) Energy analysis of an air conditioning system using PID and fuzzy logic controllers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saaiddin, Zulkurnain (2006) Energy conservation and management a case study of kompleks bangunan getah asli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lee, Huay Kuan (2006) Enhancing global competitiveness of penang electronics and electrical small and medium industries through improving linkage programmes. PhD thesis, Universiti Teknologi Malaysia, Business & Advanced Technology Centre; Engineering Business Management.

Chia, Won Chee (2006) Enterprise information system model for Royal Malaysian Navy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science & Information System.

Wong, Yuen Hwa (2006) Equitable remedy : injunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Dolah, Rozzeta (2006) Etching performance of silicon wafers with redesigned etching drum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Anuar, Nor Asmalina (2006) Evaluating women's empowerment in rural tourism through economic and sosial dimensions : a case study of Kampung Sungai Sireh, Tanjung Karang, Selangor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Bashir Umar, Nouruddeen (2006) Evaluation of 11kv XLPE Cable. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering : Electrical - Power Dept..

Samion, Mohd. Kamarul Huda (2006) Evaluation of design criteria for inflow and infiltration in sewerage system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jhatial, Irfan Khan (2006) Evaluation of properties of cold in place recycling material : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subramaniam, Suthagaran (2006) Evaluation of the compactive effort on the stripping characteristic of hot mix asphalt (HMA) mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sukor, Hamizer (2006) An evaluation of the effectiveness of interactive multimedia to enhance divergent analytical thinking skills. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Noruzman, Ainul Haezah (2006) Evaluation of waste water as mixing water in concrete lower strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Rhasbudin Shah, Shahreena Melati (2006) Evaluation on aggregate effective specific gravity as related to Marshall volumetric properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Zanariah (2006) Evaluation on properties of tender mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salleh, Ahmad Faizal (2006) Evaluation on the effect of the support parameters and slice thickness on the prototype quality in fused deposition modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chia, Chen Ciang (2006) Experimental and numerical investigation of the wind breaking effect of syzygium campanulatum trees. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahmoud, Abdelgadir Mohamed (2006) Experimental Study On The Response Of Mistuned Bladed Disk. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Aminudin (2006) Exploitation of contract document for construction project planning and controlling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering : Construction Management.

Ongkudon, Clarence M. (2006) Expression and optimization of recombinant human transferrin in insect cells baculovirus system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Yap, Ean Mei (2006) Extended overtime and the effect to labour productivity in construction : workers perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Oon, Dennis Soon Lee (2006) Extension of time and acceleration claims. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Padlee, Siti Falindah (2006) Factors influencing international students satisfaction in choosing Malaysian private higher educational institutions as their study destination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development .

Yap, Nam Seen (2006) Factors influencing investment in shop houses from purchasers' and tenants' perspectives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Kanagaratnam, Thavaselvam (2006) Factors influencing process facilitation conducted by internal consultants in Malaysian Corporate Organisations. PhD thesis, Universiti Teknologi Malaysia, Business Advances Technology Centre.

Tufail, Muhammad Asim (2006) Factors leading to decentralization of office firms: the case of multimedia super corridor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew, Yek Ban (2006) Failure assessment of surface mount assembly under thermomechanical loading conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Nur Faizal (2006) Faktor yang dipertimbangkan sebelum membangunkan harta tanah perumahan dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohamad @ Ahmad, Khairil Azizi (2006) Faktor-faktor kejayaan perlaksanaan sistem kualiti ISO9000 di dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Idris (2006) Faktor-faktor kelewatan dalam projek pembinaan bangunan pendidikan MARA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Azhar (2006) Faktor-faktor kelewatan dalam proses pengambilan tanah bagi kegunaan awam di semenanjung Malaysia : kajian kes : di Selangor dan Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ibrahim, Fadzilah (2006) Faktor-faktor kritikal bagi pemulihan projek perumahan terbengkalai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Latif, Anizan (2006) Faktor-faktor pemindahan latihan teknologi maklumat dan hubungannya dengan kemahiran teknologi maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Nik Mohd., Nik Ahmad Ridhwan (2006) Feasibility study on improving of 5-seater helicopter forward flight speed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zafar, Muhammad Faisal (2006) Feature enhancement for extracting on-line isolated handwritten characters. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat.

Sihab, Norsabrina (2006) Feature extraction of power disturbance signal using time frequency analysis. Masters thesis, Universiti Teknologi Malaysia.

Ali, Mohd. Basri (2006) Feature recognition using rule base techniques for feature with intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Masnani (2006) Features extraction of heart sounds using timefrequency distribution and mel-frequency cepstrum coefficient. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

O. S. Ali, Abu Baker (2006) Fiber optic duplexer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jaswar, Fitri Dewi (2006) Field programmable gate array implementation of multi-frequency continuous phase frequency shift keying modulation technique for high frequency data communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chai, Chon Lung (2006) Finding kernel function for stock market prediction with support vector regression. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Yusoff, Che Som (2006) Finite element analysis on flush end plate connection using LUSAS software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Sarina (2006) Finite element modeling and analysis of sandwich dry floor slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Akbar, Nor Azliza (2006) Flood damage assessment model using cost-benefit analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Muhammad Firdaus (2006) Flow and heat transfer analysis on spiral counter flow heat recirculating burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Sabit, Hakilo (2006) Flow regime identification of particles conveying in pneumatic pipeline using electric charge tomography and neural network techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Latif, Eleena Surliana (2006) Foliar nutrient mapping and estimation of oil palm yield using multi-temporal landsat - 5 TM data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kiu, Kee Heng (2006) Forensic analysis of explosives from water samples using solid phase microextraction-gas chromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nik Mohd. Zain, Nik Nooraini (2006) The formulation of a national land policy for Malaysia with special reference to national housing policy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chen, Chan Hoong (2006) Formulation of silane crosslinkable rotational molding polyethylene compound. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abang Jawawi, Dayang Norhayati (2006) A framework for component - based reuse for autonomous mobile robot software. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Husin, Nur Hakimah (2006) Functional testing of CoRNEA Business Applications System (CoRNEA BIZ-APPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yahaya @ Jaafar, Hanani (2006) Fundamental ablation of argon - flouride excimer laser on polymethyl methacrylate by interferomety technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Mohd. Faisal (2006) Fuzzy modelling and control for a nonlinear reboiler system of a distillation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Foo, Chwan Yee (2006) Generic cascade analysis technique for setting the minimum targets for resource conservation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wai, Tai Kuan (2006) Ground plane obstacle detection for mobile robot navigation based on optical flow field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liau, Li Yun (2006) Group - like algebraic structures of fuzzy topographic topological mapping for siolving neuromagnetic inverse problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liau, Li Yun (2006) Group-like algebraic structures of fuzzy topographic topological mapping for solving neuromagnetic inverse problem. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Goh, Kai Chen (2006) A groupware system in monitoring construction project planning approval. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paniandi, Arul (2006) A hardware implementation of Rivest-Shamir-Adleman co-processor for resource constrained embedded systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Tajudin, Mohamad Hafiz (2006) The heck reactions of aryl bromides in ionic liquids medium of n-butyl-n-methylpyrrolidinium trifluoromethanesulfonate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasan, Nurulfadzilah (2006) HF messaging system with automatic link establishment (ALE) capability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Bakar, Rabieahtul (2006) High precision global positioning system data processing velocity vector determination for geodynamic application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Yong, Hong Lee (2006) Home buyers requirements for housing development within districts in Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Rasyidah (2006) Hubungan antara gaya didikan dan latar belakang sosioekonomi ibubapa dengan pencapaian akademik pelajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Aziz, Fa'iza Hilmi (2006) Human resource training management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Elia Erwani (2006) Hybrid committee artificial neural networks for classification of banana maturity level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Karim, Shakirah (2006) Hybrid encryption technology : a performance analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hussain, Ahmad (2006) Hydrodynamic and thermochemical studies of palm shell waste and coal blends in a circulating fluidised bed riser. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Fitra Darina (2006) Hyperbaric Recompression Chamber (HRC) monitoring application system development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hanafi, Dirman (2006) Identification of a quarter car passive suspension system using weighted least squares neural networks for a hammerstein model. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Zainuddin, Nurulhuda (2006) Images information retrieval using Gustafson-Kessel relevance feedback. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zakaria, Kamarul Ariffin (2006) Impact analysis of fibreglass reinforced composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad, Roslina (2006) Impact properties of cirular beam under lateral loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amir, Anuar (2006) Impak limpahan pembandaran ke atas kampung pinggir bandar di wilayah metropolitan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Sidek, Abd. Rahim (2006) Implementation and integration of HF messaging system with cryptographic features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khairuddin, Muhammad Asyraf (2006) Implementation guidelines for using walk-through and questionnaire techniques in evaluating the scrum method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamad Amran, Mohd. Fahmi (2006) Implementation of computer simulation in rubber assembly line: a case study (Rubber Research Institute Of Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science & Information System.

Ahmad @ Salleh, Noor Azurati (2006) Implementation of embedded web server for real-time interaction with mobile robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakaria, Nor Farizan (2006) Implementation of fingerprint biometric template system in embedded software design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Faudzi, Ahmad 'Athif (2006) Implementation of generalized predictive control (GPC) for a real-time process control using labview. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering; Electrical-Mechatronics and Automatic Control.

Youceff, Berreksi (2006) Implementation of ISO 9001:2000 quality management system for construction biddings procedures in construction management practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Chuan Yee (2006) The implementation of quality management system (ISO 9001) in analysing the workmanships performance in selected projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Imrani, Khurram Junaid (2006) Implementation of skill test (Web based skill assessment system) using Java 2 platform for IKRAM solutions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali Pitchay, Sakinah (2006) Implementation software testing life cycle for CoRNEA (Integrated School Management System). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lim, Pui Chung (2006) Implementation strategy for industrialised building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thalaha, Azezee (2006) Implementing information lifecycle management VIA HP storageworks enterprise Array and HP storageworks continuous access. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassim, Nurulhalim (2006) The implications of streetscape improvement on tourist behaviour at the old quarter of Melaka. Masters thesis, University Teknologi Malaysia, Faculty of Built Environment : Tourism Planning Dept..

Tiong, Hua Sang (2006) Implikasi lesen penduduk sementara terhadap pembangunan tanah untuk maksud pelancongan di Kukup, Daerah Pontian, negeri Johor Darul Ta'zim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Lee, Chee Choon (2006) The importance of feasibility study to reduce risks of project failures : case study : 17.58-acre commercial land at Kota Damansara). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdul Ghani, Norhisham (2006) The importance of preliminaries items. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Yun Rou (2006) Improved characteristics of radio frequency interdigital capacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahaya, Azizi (2006) Indeks Perlakuan Buli Di Kalangan Pelajar-pelajar Sekolah Menengah dan Rendah Di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Jabatan Asas Pendidikan.

Tay, Allan Eng Mian (2006) Industrialised building system formation scheduling for public buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik Mat, Nik Zalbiha (2006) Information security risk assessment at JHEV-ATM develop and implementation of risk assessment method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Sharif, Norrol Asikin (2006) Information system planning for Institut Kemahiran Baitulmal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Isa, Naurah (2006) Injection moulding parameters and performance of rice husk-high density polyethylene composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Md. Yusop, Azdiana (2006) Input shaping for vibration-free positioning of flexible systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liew, Kuet Fah (2006) Integrated modelling for coastal alluvium aquifer at Kg. Tekek, Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Woon, Kai Siong (2006) Integrating construactability into the design process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Safian, Mohd. Aznan Shukri (2006) Integrity assessment of corroded pipeline using in-line inspection data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pitowarno, Endra (2006) Intelligent active force control for mobile manipulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Mazita (2006) Intelligent car detecting system (ICDS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamdan, Lailatul Akmar (2006) Intelligent surveillance portray (ISPY) / Lailatul Akmar Hamdan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed, Farhan (2006) Intelligent web caching architecture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Hamid, Mariam (2006) Interactive product design portal for small-medium enterprise. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad, Mohd. Ridzuan (2006) Interpreting IEEE standards for SRS and SDD documents : intec CMS case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Marsin, Faridah (2006) Introduction of foreign metals onto unsupported and supported nickel praseodymium oxide catalyst for conversion of carbon dioxide to methane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mahiyudin, Suhaida (2006) Investigating the process of organizational knowledge creation in higher education : case study : University Technology Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Shafie, Shafini (2006) Investigation of temperature prolife in the waveguide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chan, Chee Hing (2006) Investigation of watershed cumulative effects by up scaling of model parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Hemdi, Abdul Rahman (2006) Investigation on the effect of parting lines on the vacuum casting parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Zain, Mazira (2006) An investigation on the use of computer to learn english language vocabulary: a case study of form four students in a sub-urban school in Kuching, Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Rasip, Mohd. Kamal (2006) Isu pembangunan di kawasan tanah tinggi dan berbukit ( kes kajian : Majlis Perbandaran Ampang Jaya ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mariappan, Gengatharan (2006) Isu-isu pengintegrasian pangkalan data ukur kadaster dan sistem pendaftaran tanah berkomputer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Daud, Nurshikhah (2006) Kajian analisis taman awam bandaran didalam mempengaruhi pengguna : kajian kes : Taman Tasik Cyberjaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment .

Nik Mohamed, Nik Sarulazizie (2006) Kajian ke atas penguatkuasaan pelanggaran syarat guna tanah di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Akau, Johny (2006) Kajian kepuasan pelancong terhadap perkhidmatan shuttle bus : kajian kes : City Tram, Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Mohamad Syahrizal (2006) Kajian kimia zerumbon daripada Zingiber Zerumbet, Smith. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Nor Hasniza (2006) Kajian pemikiran dan amalan refleksi di kalangan guru pelatih sains Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Harun, Norhazliana Ezreen (2006) Kajian penentuan kawasan bukit berisiko menggunakan sistem maklumat geografi (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Ali, Mohd. Nizam (2006) Kajian terhadap faktor yang mempengaruhi pembangunan tanah rezab Melayu di Lakin Jaya, Johor Bahru daripada perspektif pemilik dan penyewa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Dzulkifli, Syarizul Amri (2006) Kajian terhadap pembangunan aplikasi perniagaan elektronik secara bersepadu berasaskan RosettaNet : kajian kes Azhar Food Supplier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Yunus, Dewi Adharina (2006) Kajian terhadap perlaksanaan program local agenda 21 di peringkat pihak berkuasa tempatan kajian kes: Kampung Melayu Majidee, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Maznan, Roslinda (2006) Kajian terhadap senibina perisian mudah suai untuk sistem sejahtera. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdullah, Adnan (2006) Ke arah pembangunan sistem perancangan dan penyelenggaran infrastruktur marin di pelabuhan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohamed Akil, Azilah (2006) Kecekapan tenaga ke arah pembangunan mampan dalam sektor perumahan : kajian kes : Taman Ungku Tun Aminah, Taman Universiti dan Bandar Baru Kangkar Pulai, Johor Bahru Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hassan, Bismawaty (2006) Keenganan golongan setinggan berpindah ke perumahan kos rendah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Othman, Alwee (2006) Kelakuan pemandu ketika masa amber dalam kawasan taman perumahan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Norani (2006) Kepentingan kemahiran generik untuk pekerjaan di industri dan faktor pembangunannya dalam pendidikan vokasional di sekolah menengah teknik. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Mohamed, Hasnul (2006) Kepentingan lesen pendudukan sementara sebagai penyumbang hasil kepada pihak berkuasa negeri dan pemegangnya : (kajian kes di daerah Pekan, Pahang). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Arshad, Erwan (2006) Keperluan utama dalam mendapatkan sijil perakuan bomba bagi bangunan pejabat milik kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mokhtar, Mohd. Zaki (2006) Kerosakan dan kemerosotan struktur konkrit di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bahri, Abdul Rahman (2006) Kesan perubahan garisan pantai akibat tsunami ke atas lot tanah yang di beri milik berdasarkan imej remote sensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abd. Rahman Asa, Zainal Abidin (2006) Ketidakselarasan maklumat antara sistem hasil tanah berkomputer dan sistem pendaftaran tanah berkomputer di Pejabat Tanah Daerah Petaling Selangor, Pejabat Tanah dan Galian Wilayah Persekutuan Kuala Lumpur dan Pejabat Tanah dan Galian Wilayah Persekutuan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Nadarajan, Vimala (2006) Knowledge mangement model based on roles in problem solving process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Rashid, Roslizana (2006) Komuniti kediaman berpagar sebagai alternatif kediaman terancang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed Saeed Bawazir, Hassan (2006) Kress smoothing transformation for weakly singular Fredholm integral equation of second kind. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Azmi, Jannaltul Firdaus (2006) KTD e-library system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jusoh, Hamzah (2006) Kuala Lumpur dalam sistem jaringan bandar raya global. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment .

Kasan, Nor Azman (2006) Kualiti air sungai berdasarkan analisis kimia dan kepelbagaian alga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasit, Nazaitulshila (2006) Landfill leachate treatment using subsurface flow constructed wetlands enhanced with magnetic field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Wahab, Suhaila (2006) Laporan cadangan pemajuan : sejauhmana keperluan dan kepentingannya kepada pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Nazir, Noor Zarina (2006) Late payment problems among contractors in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahamad Nordin, Noor Ida Amalina (2006) Leachate treatment using constructed wetland with magnetic field. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarudzaman, Ain Nihla (2006) Leachate treatment using subsurface flow and free water surface constructed wetland systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Khalina (2006) Learning path tracking system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ng, Sock Hooi (2006) Legal position of the issues associated with main contractor's insolvency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment : Construction Contract Management Dept..

Mat Taib, Ismail (2006) The liability of local authority in respect of residential development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Poniran, Zalizah (2006) Life assessment of power transformer via furans analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yong, Mei Lee (2006) Liquidated and ascertained damages (LAD) and requirements of mitigation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment : Construction Contract Management Dept..

Rahman, Mohd. Mokhlesur (2006) Lithium metal oxides (metal = manganese, chromium, cobalt, or aluminium) as cathode in lithium ion batery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Te, Chei Yean (2006) Load carrying capacity of dry floor panel system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fong, Yeow Huang (2006) Load dispatch optimization of open cycle industrial gas turbine plant incorporating operational, maintenance and environmental parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Huo, John Shien Chai (2006) Location aware e-patient's medical record based on WLAN indoor geolocation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aris, Rozita (2006) Maintenance factors in building design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Ahmad Riza (2006) Maintenance management and servises (case study: PERKESO building's in penisular of Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mok, Yew Cheong (2006) Maintenance management for batching plant. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Motsa, Caleb Dumisa (2006) Managing construction disputes. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Abdul Rahiman, Nafisah (2006) Managing construction project risks; case study: contractors in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Motsa, Caleb Dumisa (2006) Managing contruction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wirabhuana, Arya (2006) Manufacturing process re-engineering design implementation using computer simulation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Hasmadi (2006) Masalah gangguan seksual di kalangan guru di empat buah negeri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad, Mohamad Rahim (2006) Masalah pembiayaan bagi membangunkan tanah-tanah wakaf kajian kes : Negeri Perak Darul Ridzuan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chan, Ching Yeng (2006) Masalah pengumpulan data di Syarikat Perumahan Negara Berhad dalam pemulihan projek perumahan terbengkalai di Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ismail, Azizee (2006) Masalah yang dihadapi dalam penyediaan perumahan Polis Diraja Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raja Ismail, Raja Mohd. Taufika (2006) Mathematical modelling of boundary layer flow and heat transfer in forced convection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, Zuhaila (2006) Mathematical modelling of non-Newtonian blood flow through a tapered stenotic artery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu-Galala, Mahmoud M. Taher (2006) Measuring service quality of IP data over UMTS network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Mazatusziha (2006) Mechanical properties of rice husk filled impact modified unplasticised poly(vinyl chloride) composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu Bakar, Aznizam (2006) Mechanical, thermal and processing properties of oil palm empty fruit bunch-filled impact modified unplasticised poly (vinyl chloride) composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed, Zulkifli (2006) Mechatronic design and development of a robotic arm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kosman, Kamarul Afizi (2006) Media penerbitan dan penyebaran idea identiti seni bina Malaysia: pengajaran daripada pergerakan arts and crafts di Britain dan Institusi Deutsche Werkbund di Jerman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Yasan, Muhamad Saffie (2006) Meningkatkan manfaat bersaing di IKS menggunakan aplikasi SERP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

A'ubid, Na'emah (2006) Methods development for separation of fungicides using micellar electrokinetic chromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. Manan, Muhammad (2006) Microscopic study of emulsion flow in porous media. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Abdel Rahman Osman, Mai (2006) Microstrip array antenna for automobile radar system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tuan Syed Dabal, Syed Shaharum (2006) MILS performance dashboard system (Initial Study). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chow, Ai Wei (2006) Model - based inferential estimation of product concentration in a fed - batch fermentation process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Mohd. Sefai (2006) Model CoCL yang berasaskan penggabungan konstruktivisme dan pembelajaran koperatif dalam pemupukan kemahiran penyelesaian masalah dan membuat ramalan dalam tajuk pecahan. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Abdullah, Salha (2006) Model for integrated feasibility study system for building project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment .

Zainul Azlan, Norsinnira (2006) Modeling and control of electrohydraulic robot manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering; Electrical-Mechatronics and Automatic Control.

Amir, Amat (2006) Modeling and control of nonlinear active suspension system using a backsteping technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishak, Norlela (2006) Modeling and control of the nonlinear quater car model for active suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Rozali, Sahazati (2006) Modeling and controller design for a coupled-tank liquid level system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Abdelaziz, Izzeldin Ibrahim (2006) Modeling and performance evaluation of self-similar behavior of MPEG-4 video traffic generators. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tee, Kok Peng (2006) The modeling and simulation of ballistic nano-scaled MOSFET. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baharum, Sabariah (2006) Modeling of a clinical waste incineration process using novel fuzzy autocatalytic : a manifestation of mathematical thinking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lau, Chin Wei (2006) Modeling of dynamic behavior of printed circuit board (PCB) subjected to mechanical shock loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Toh, Yik Fung (2006) Modeling of shear bond in composite slab using interface element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Michael Loong Peng (2006) Modeling the effect of velocity saturation in nanoscale MOSFET. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Fauzi, Fijay (2006) Modelling and simulation of magnetically suspended balance beam system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering; Electrical-Mechatronic and Automatic Control.

Ismail, Muhamad Aqmarr Norhakim (2006) Modelling of tidal effect on suspended sediment dispersion at Sungai Batu Pahat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Sharatul Izah (2006) Modern and intelligent controller for a magnetic bearing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat, Ramli (2006) Modification of zeolite Hzsm-5 for methane conversion to higher hydrocarbons. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Fadlil, Abdul Fadlil (2006) Modified approach of online handwriten text recognition and signature verification system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Abd. Mazak, Marzita (2006) Modified zeolite beta as catalysts in friedel-crafts alkylation of resorcinol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, Hashimah (2006) Motion control using voice for wheelchair application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering : Electrical - Mechatronic & Automatic Control.

Hamid, Mueiz-Eldin Adil (2006) Multi-band antenna for GSM, 3G, Bluetooth and Wireless LAN Application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering : Electrical-Electronic &Telecommunication Dept.

M. M. Owag, Abdurahman (2006) Multiband antenna for GSM and 3G Mobile System. Masters thesis, University Technology Malaysia, Faculty of Electrical Engineering.

Mohd. Yusof, Norfadzila (2006) Multilevel learning in Kohonen SOM network for classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Aziz, Mohamad Redhwan (2006) Natural convection in semi trapezoidal enclosure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Ishak, Saiddi Ali Firdaus (2006) Natural convection in semi-cylindrical cavity with heat flux boundary conditions into the system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ling, Tek Lee (2006) Natural justice in adjudication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Thomas, Moh Shan Yau (2006) Neuro fuzzy classification and detection technique for bioinformatics problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Rainah (2006) Neuro modelling and vibration control of flexible rectangular plate structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chan, Melissa Yuet Li (2006) New Engineering Contract (NEC) 1993 as radical changes to the Malaysian standard forms of contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rahim, Abd. Rahman (2006) New Product Development Framework For Engineer-Toorder Production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Teh, Yuan Ying (2006) Numerical conformal mapping via the Bergman kernel using Fourier method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Sukimin, Syahrulnizam @ Helmi (2006) Numerical modelling study for application of hydraulic structures for flood control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Boon Chong (2006) Numerical simulation of supercritical flow in open channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chew, Ai Ling (2006) Nutrient removal from leachate using horizontal subsurface constructed wetlands. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Yuslina (2006) Ontology-based metabolic pathway prediction using saccharomyces cerevisiae data from genbank, ecocyc and kegg. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Rais, Siti Sara (2006) Optical receiver bandwidth enhancement using bootstrap transimpedance amplification technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, Rohayanti (2006) Optimal path planning algorithms in virtual environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Islam, Shah Jahirul (2006) Optimization of cable and source substation's location selections of power distribution networks. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Abidin, Ummikalsom (2006) Optimization of constructal design of a microchannel heat sink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azman, Nur Aifaa (2006) Optimization of jet fuel autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

M. Ongkudon, Clarence (2006) Optimization of recombinant human transferrin expression in insect cells baculovirus system. Masters thesis, Universiti Teknologi Malaysia, Bioprocess Engineering.

Kuik, Sok Ping (2006) Optimized subtractive clustering for cluster-based compound selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Alashwal, Ali Mohammed (2006) Optimizing production line of IBS by using simulation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Kim Heok (2006) Out-of-core simplification with appearance preservation for computer game applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ishak, Saurdi (2006) Outdoor propagation prediction and measurement for WLAN application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering : Electrical-Electronics & Telecommunication Dept..

Ahmad, Md. Zarafi (2006) Overmodulation and field weakening in direct torque control of induction motor drives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rahman, Nor Farahaida (2006) Ozone applications for spawn treatment of mushroom cultivation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdull Hamed, Haza Nuzly (2006) Particle swarm optimization for neural network learning enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Gan, Hock Lai (2006) Password - based authentication in wireless LAN. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah @ Idris, Ahmad Takiyuddin (2006) Path planning for constant speed robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shafiin, Hafizi (2006) Pattern recognition of cerebral haemorrhage (CH) from computed tomography (CT) images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ang, Tony Su Sin (2006) Payment issues - the present dilemmas of malaysian construction industry. Masters thesis, Univeristi Teknologi Malaysia, Faculty of Built Environment.

Che Munaaim, Muhammad Ehsan (2006) Payment woes among Malaysian contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nazlan Oziz, Syaratul Khairiah (2006) PDA security : GAP analysis of blackberry in MYK. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Syed Yusof, Sharifah Kamilah (2006) Peak-to-average power ratio and intercarrier interference reduction techniques in MIMO-OFDM system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Elektrik.

Riry Zaimora, Riry Zaimora (2006) Pelaksanaan piawaian pembangunan fasiliti penginapan dalam kawasan hutan lindungan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tahir, Suhaidah (2006) Pemahaman konsep pecahan dalam kalangan tiga kelompok pelajar secara keratan lintang. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ab. Rahman, Faridah (2006) Pembandaran pusat bandar Kuala Lumpur dan Putrajaya dalam mempengaruhi harga tanah rizab melayu di kawasan sekitarnya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Basiran, Haspiah (2006) Pembangunan dan penilaian modul pengajaran dan pembelajaran menggunakan kalkulator grafik dalam pembelajaran persamaan kuadratik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahamad, Masrah (2006) Pembangunan dan penilaian perisian prototaip MS~GraviS berasaskan kemahiran berfikir secara kritis dalam mekanik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad, Nur Iliawani (2006) Pembangunan e-shopping berdasarkan kajian TRUST dalam aplikasi perdagangan elektronik kajian kes : kedai buku Koperasi UTM Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali, Nor Eeda (2006) Pembangunan komuniti di dalam perlaksanaan konsep bandar selamat; kajian kes : Bukit Jelutong, Seksyen U8, Shah Alam, Selangor Darul Ehsan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abbas, Mohd. Azwan (2006) Pembangunan perisian bagi perolehan data cerapan dari robotic total station (LEICA TCA) secara masa hakiki. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering; Department of Geomatic Engineering.

Wong, Kin On (2006) Pembangunan perisian dan analisis kejituan sistem penentududukan global bezaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Tengku Ali, Tengku Afrizal (2006) Pembangunan sistem bantuan navigasi di pelabuhan menggunakan data ramalan pasang surut. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Maulud, Khairul Nizam (2006) Pembangunan sistem maklumat perjalanan pelancongan berasaskan sistem maklumat geografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Tan, Meng Loon (2006) Pembangunan sistem nyah cemar kimia anggota untuk tentera darat Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, Suraya (2006) Pembangunan sistem pangkalan data bagi proses penilaian tender di dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Zainudin (2006) Pembangunan sistem pengkalan data perolehan bahan latihan di Institut Latihan Perindustrian Muar (ILP Muar). Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Md. Zain, Jasni (2006) Pembangunan tanah wakaf Majlis Agama Islam Negeri Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ismail, Adnan (2006) Pembentukan corak resipan disebabkan oleh penyusupan hujan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering : Department of Geotechnics.

Ibrahim, Nor Hasniza (2006) Pemikiran dan amalan refleksi di kalangan guru pelatih sains Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hanafiah, Khairul Anwar (2006) Pemilihan gear optimum kaedah algoritma genetik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahazir, Mashanim (2006) Pemilihan sistem perparitan sementara untuk diaplikasi di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yunos, Zuriahati (2006) Pemodelan data indeks komposit Kuala Lumpur menggunakan neurofuzzy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chan, Ching Yeng (2006) Pemulihan projek perumahan terbengkalai di Selangor dan cara mengatasinya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Abdullah, Shardy (2006) Penambahbaikan organisasi bahagian pengurusan harta tanah pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ishak, Muhamad Haitamin (2006) Pencapaian pelaksanaan sistem pendaftaran tanah berkomputer (SPTB) dalam pendaftaran urusan tanah di Pejabat Tanah dan Galian Negei Selangor, Shah Alam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Zainal Abidin, Mohd. Hazreek (2006) Pendekatan penilaian untuk analisa cerun tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar Chong, Noraini (2006) Penempatan semula untuk pembangunan pelancongan - program pembangunan infrastruktur pusat pembuatan bot Pulau Duyong. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Latif, Marhana (2006) Penentuan kestabilan cerun disebabkan oleh penyusupan hujan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Noryusliza (2006) Pengagihan kursus ke IPTA berdasarkan sistem bantuan keputusan : kajian kes : Universiti Teknologi Malaysia dan Kolej Universiti Teknologi Tun Hussein Onn. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Amin, Ismail (2006) Pengecaman wajah menggunakan kaedah graf terhubung. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ng, Cheng Guek (2006) Pengelasan dan keseragaman antara hasil pembelajaran dan soalan peperiksaan akhir kursus Fakulti Sains dan Fakulti Pendidikan di Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Low, Wee How (2006) Pengeluaran hakmilik blok selepas kelulusan serahbalik kurniasemula di negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd. Yassin, Siti Fatimah (2006) Pengembangan kreativiti pelajar luar bandar melalui projek pembangunan produk multimedia kreatif di kelas literasi komputer. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Mohd. Napiah, Asmahani (2006) Pengenalpastian risiko penggunaan 'bored pile system' serta kesan terhadap persekitaran : kajian kes : bangunan tambahan MPJBT. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Erica Dina, Erica Dina (2006) Pengesanan proses pengaratan dan perubahan PH dalam konkrit bertetulang menggunakan serabut optik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sahdan, Ahmad Yusof (2006) Penggunaan penyepadanan imej berdasarkan kawasan dalam fotogrametri jarak dekat bagi pengukuran permukaan struktur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Haiza Wahida (2006) Penggunan web gis oleh pihak berkuasa perancangan : tinjauan kandungan dan tahap perkhidmatan yang disediakan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Taib, Zakaria (2006) Pengkelasan kompetensi bidang kepakaran berasaskan rangkaian neural dalam sistem pengurusan kompetensi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kurmin, Norazrin (2006) Pengoptimuman skema logikal pangkalan data hubungan : kajian kes pangkalan data sistem maklumat hidrologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shari, Mohamad Azrul (2006) Pengurusan penyenggaraan bangunan lama kajian kes : Bangunan Sultan Ibrahim, Bukit Timbalan, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ahmad, Wan Yahya (2006) Pengurusan setinggan di atas tanah kerajaan untuk maksud pembangunan tanah : kajian kes : Merdeka Villa, Ampang, Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Mohd, Mohd. Azhar (2006) Pengurusan tenaga dalam pengurusan harta ke arah membantu pembangunan mampan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Rosli, Siti Hafsah (2006) Penilaian dan pemilihan pengurus projek. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Mohamad @ Hamza, Mohd. Azwan (2006) Penilaian esei berbantukan komputer menggunakan teknik Bayesian dan pengunduran linear berganda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Che' Man, Noordini (2006) Penilaian keberkesanan sistem kawalan pembangunan : pengalaman Jabatan Perancang Bandar, Dewan bandaraya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Karli, Mohd. Shafie (2006) Pentadbiran dan pengurusan harta tanah lebihan faraid melalui perolehan sistem pusaka di Majlis Agama Islam Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Sulaiman, Rusman (2006) Penyertaan awam di kalangan orang melayu di dalam proses penyediaan pelan tempatan, Majlis Perbandaran Seremban. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Aziz, Noorhalimatun Saadiah (2006) Peramalan banjir menggunakan model rangkaian neural beserta teknik pengoptimuman Levenberg-Marquadt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Samah, Mohamad (2006) Peranan MPOB dalam menguruskan tanah pertanian pekebun kecil sawit persendirian di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jumiran, Ar. Mohd. Hamzah (2006) Peranan perunding dalam proses pembangunan harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jamil, Mohd. Faizal (2006) Perbandingan prestasi komunikasi message passing interface dan parallel virtual machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammad Idris, Mohammad Shahrizal (2006) Perception and performance measurement in facilities management outsourcing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Khalid, Amir (2006) Performance analysis of an air conditioning system using rotary compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koslan, Md. Fuad Shah (2006) Performance analysis of ceramic recuperator for microturbines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad Said, Mohd. Farid (2006) Performance and emission tests of biodiesel fuels using a conventional diesel engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tang, Yu Cai (2006) Performance evaluation of coated carbide cutting tools when turning hardened tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Abdul Rahaman, Wan Emri (2006) Performance evaluation of coated ceramic cutting tools with T-land edge preparation when turning hardened tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vichare, Parag Shashikant (2006) Performance evaluation of grinding and lapping operations for generating aspheric surfaces on glass moulds using vertical machining centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Affandi Mohd. Zainal, Affandi (2006) Performance evaluation of wiper and conventional coated ceramic inserts when turning hardened tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Mas Ayu (2006) Performance evaluation of wire electro-discharge machining on tungsten carbide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mudiyono, Rachmat (2006) Performance of concrete block pavement on sloped road section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ong, Chee Huat (2006) Performance of concrete containging metakaolin as cement replacement material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering ; Structure.

Ibrahim, Ramzi (2006) The performance of Felda Plantations Sdn. Bhd. contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdolee, Reza (2006) Performance of MIMO space-time coded system and training based channel estimation for MIMO-OFDM system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Tuah, Piakong (2006) The performance of phenol biodegradation by Candida Tropicalis RETL-cr1 using batch and fed-batch fermentation techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Zee Sum (2006) Performance of stainless steel purlin in bending. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Yazid (2006) Performance of transmission control protocol on mobile internet protocol network during handoff. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saad, Muhamad Mokhtar (2006) Performance study of automatic transmit power control (ATPC) in point to point microwave link for rain attenuation problem in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Voon, Sze Chee (2006) Performance study of flat antenna in direct broadcast satellite (DBS) application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mansor, Maisarah Wahieda (2006) Perlaksanaan CSCW dalam QCC menggunakan metodologi ethics: kajian kes kumpulan APQ, Pejabat Harta Bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Othman, Naim (2006) Perlaksanaan ISO 9000: kajian ke atas firma kontraktor di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salim, Salmi (2006) Perlaksanaan sistem fertigasi dalam penanaman sayuran-sayuran di Malaysia : kajian kes : Melaka Tropical Fruit Farm (MTFF). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Muhamad Nor, Nur Syahriza (2006) Permeability in Malaysian hot mix asphalt mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Erisman, Afri (2006) Permintaan dan piawai kemudahan pusat aktiviti harian warga tua : kajian kes-kawasan Bandar Raya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Baharom, Badrulzaman (2006) Persekitaran keluarga Dan Kesannya Terhadap Tingkah laku Devian remaja DI Daerah Pontian, Johor. Masters thesis, Universiti Teknologi Malaysia, Jabatan Asas Pendidikan.

Mohd. Isa, Jasmilia (2006) Persepasi pengguna terhadap keberkesanan Perpustakaan kajian kes : Perpustakaan Sultanah Zanariah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ismail, Nurul Iswani (2006) Persepsi keselamatan pelancong di kawasan ekopelancongan kajian kes: Taman Negara, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sashedharan, Durga Devi (2006) Persepsi masyarakat terhadap pembangunan landskap di jalan-jalan utama : Majlis Perbandaran Johor Bahru Tengah (MPJBT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ismail, Khazani (2006) Persepsi terhadap budaya kualiti dalam organisasi perkhidmatan awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ong, Boon Thai (2006) Personal digital assistants as a mobile inspection system at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Saiyudi, Noor Khaida Wati (2006) Photocatalytic oxidation of gas phase volatile organic compounds using undoped and metal ions doped titanium dioxide thin films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science; Department of Chemistry.

Md. Ani, Sarizal (2006) Physical behaviour of powder ceramic part using cold isostatic pressing (CIP) processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adan, Daliza (2006) Physical characterisation of hydrogen sorption onto carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamil, Shajarahtunnur (2006) Phytochemical and bioactivities of Malaysian Artocarpus lowii king, A. Scortechinii king and A. Teysmanii MIQ. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Susanti, Deny (2006) Phytochemical and bioactivity studies of Melastoma Malabathricum L. and Melastoma Imbricatum Wall. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Md. Khudzari, Ahmad Zahran (2006) Polar cavity flow solution using splitting technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokhtar, Rashidah (2006) Portal pengetahuan zakat kajian kes: unit pungutan dan agihan zakat Majlis Agama Islam Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ham, Kau Fei (2006) Portal pengguna berpandukan konsep CRM kajian kes: Bahagian Penguatkuasa KPDN & HEP, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sulaiman, Mohd. Herwan (2006) Power flow and loss allocation using superposition theory method for deregulated transmission system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Naseeb Khamis, Adel Khaleef (2006) Precise geoid determination for the united arab emirates (U.A.E). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Tan, Caren Cai Loon (2006) Predicting the performance of design-bid-build projects: a neural-network based approach. Masters thesis, Universiti Teknologi Malaysia.

Wong, Charng Chen (2006) Prediction of ultimate load bearing capacity of driven piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Cheong, Wai Wan (2006) Preparation and characterization of activated carbons from bamboo for adsorption studies on the removal of surfactants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wong, Kwon Cheong (2006) Preparation and characterization of carbon molecular sieve produced from palm shell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Latif, Famiza (2006) Preparation and characterization of poly (methyl methacrylate) / 50% epoxidised natural rubber based solid electrolytes for lithium-ion secondary battery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Adil, Mohammad (2006) Preparation, modification and characterization of activated carbons for batch adsorption studies on the removal of selected metal ions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Masripan, Nor Azmmi (2006) Pressurised pyrolysis of rice husk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Siti Hawa (2006) Preventing SQL injection and cross-site scripting in web application by validating users' inputs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ng, Chu Yin (2006) Problems associated with nominated subcontractors in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Saman, Alias (2006) Processing and evaluation of high intergrity ductile iron vertical casting for automotive application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lourdesamy, Brian Sebastian (2006) Procurement arrangements and its implications on residential construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Yusof, Nor Hasanah (2006) Product management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ngo, Saik Peng (2006) Production of amorphous silica from rice husk in fluidised bed system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abu, Rozaimi (2006) Production of pullulanase from Bacillus flavothermus KWF-1 in batch culture : preliminary characterization and medium development using experimental design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Awang Morshaidi, Awang Mortaza (2006) Project communication at construction stage. Masters thesis, Universiti Teknologi Malaysia,Faculty of Civil Engineering.

Abdul Hamid, Mohd. Faisal (2006) Project monitoring systems (PMS II) - case study on the constraints and problems facing at users level. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aboharba, Ibrahim M. Abdalla (2006) Propagation measurements and prediction for indoor wlan application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdollah, Mohd. Fairus (2006) Proportional integral sliding mode control of a two-wheeled balancing robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering; Electrical-Mechatronics and Automatic Control.

Muhammad, Nazran (2006) Punca-punca dan implikasi pendudukan tak sah tanah kerajaan : kajian kes di jajahan Gua Musang Kelantan Darulnaim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Saleem, Kashif (2006) QoS provisioning for real time services in MPLS diffserv aware IPv6 network using IXP-2xxx (Intel Network Processor). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Mohd. Afzan (2006) Rain models for the prediction of fade duration at millimeter wavelengths. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ho, Chee Kean (2006) Rangka kerja peningkatan jangka hayat sistem artileri pertahanan udara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Shahid (2006) Rangka kerja peningkatan tanah pengurusan penyenggaran woksyop kenderaan Tentera darat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Daik, Sanjan (2006) Reading habits of teachers in four government-aided secondary schools (mission schools) in Kuching district. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohammed Hasan, Ammar Abdo (2006) Real time scheduling for autonomous mobile robots using genetic algorithm and constraint based reasoning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shariff, Syarul Nizam (2006) Real-time remote control car racing system (PC Version). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ghani, Imran (2006) Real-time response techniques for multi-user interaction in collaborative virtual environments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lee, Kong Weng (2006) Real-time shadow casting using fake soft shadow volume with stencil buffer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Goh, Chiew Loon (2006) Real-time solids mass flow rate measurement via ethernet based optical tomography system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, Syaiful Nizam (2006) Recovery of spent bleaching clay for reuse in water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Zakariya, Khalilah (2006) Refining tourist's place experience through placemaking : a case study on Middle East tourists in Kuala Lumpur City Centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rahman, Rahinah (2006) Refocusing of electrical safety practices in Malaysia, considering uncontrolled and controlled parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang Hamid, Dayang Tiawa (2006) Reka bentuk dan keberkesanan persisian multimedia membaca faham berasaskan gambaran visual bagi kanak-kanak prasekolah. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Idrissou, Moumouni Moussa (2006) Reliability in interpreting non-destructive testing (NDT) results of concrete structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Ibrahim, Masrullizam (2006) Removal of object's shadow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

R. H. Harisan, Alison Shreenawathi (2006) Repair index method to evaluate the condition of reinforced concrete structures exposed to reinforcement corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ahmad, Nurhafiza (2006) Resource scheduling on encyclopedia's entries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mashifari, Dhahi Bilaish Sulaiyam (2006) Reverse and reengineer the electronic human resources (EHR) for Heitech Padu Berhad (HPB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abd. Kadir, Aslila (2006) Risiko dan pengurusannya dalam pembinaan : perspektif kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sarpin, Norliana (2006) Risk assessment process of hazards in construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Johari, Nory Afzan (2006) Robotic modeling and simulation of Okura A1600 robot using Workspace5. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Raman, Ramesh (2006) The role of background knowledge in the comprehension of reading texts among upper six students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Wahit, Mat Uzir (2006) Rubber toughened polyamide 6/ polypropyamide nanocomposites : mechanical, thermal and morphological properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Rusli, Norharnila (2006) Salah urus risiko dalam projek pembangunan projek perumahan: kajian ke atas projek perumahan terbengkalai di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foong, Kok Li (2006) Scheduling on transportation for industrialized building systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fong, Shiau Ween (2006) Secondary bending moment of trapezoid web beam under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghazali, Razatulshima (2006) Security in wireless sensor network enhanced AODV routing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lau, Hui Seng (2006) The selection of construction project manager by using analytical hierarchy process (AHP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Norasikin (2006) Selective emulsion liquid membrane extraction of silver from liquid photographic wastes. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Supar, Mohd. Farizal (2006) Self evaluation system for construction project manager's performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Goh, Kia Eng (2006) Self-organizing map and multilayer perceptron for malay speech recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zawawi, Umi Adzmira (2006) Sensor technologies in monitoring of civil engineering structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Mohd. Syakirin (2006) Servomotor contol using direct digital control and state-space technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Anggraini, Vivi (2006) Shear strength improvement of peat soil due to consolidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Redzuan (2006) Significant usage of slab and wall form technique in industrialised building systems (IBS) for low cost highrise apartments construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adon, Mohamad Nazib (2006) Simulasi suis optik menggunakan teknologi MEMs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ab Ghani, Mohd. Satar (2006) Simulation and experimental analysis of a suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Mohd. Shahir (2006) Simulation and optimization of butane autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Adam, Muhamad Syafiq (2006) Simulation and optimization of ethanol autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Aziz, Farhana (2006) Simulation and optimization of gasoline autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Anjura, Cosmas (2006) Simulation and optimization of hydrogen production from autothermal reforming of ethane for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Abdul Rahman, Azmil (2006) Simulation and optimization of methanol autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Insiong, Henry (2006) Simulation and optimization of propane autothermal reformer for fuel cell applications. Other thesis, Universiti Teknologi Malaysia, Chemical Engineering Department.

Satya Nand, Rajan Ratti (2006) Simulation and performance of multiple input multiple output orthogonal frequency division multiplexing wireless local area network 802.11a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Soon Ching (2006) Simulation of industrialised building system components production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Ahmad Razani (2006) Simulation of MRAS based speed sensorless estimation techniques for induction machine drives using MATLAB/Simulink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahaya, Asiah (2006) Simultaneous phase measurement interferometry for laser interaction in air. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, Perng Cheng (2006) A single-phase hybrid active power filter with photovoltaic application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kusmiyati, Kusmiyati (2006) A single-step catalytic process for the conversion of methane to gasoline over tungsten zeolite catalysts. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli.

Ab. Wahab, Siti Fatimah Nor (2006) Sistem analisis prestasi akademik murid : Sekolah Kebangsaan Selayang Utama. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zainal, Samsuddin (2006) Sistem aplikasi kiosk pelbagaiguna (WEBTEL). Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development .

Amiruddin, Satria Gandhini (2006) Sistem bantuan keputusan bagi kawalan pembangunan di kawasan tanah tinggi dan lereng bukit. Masters thesis, Univesiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah, Aslinda (2006) Sistem kod pengurusan ruang di Institut Pengajian Tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Zaini, Zalissa (2006) Sistem maklumat geografi dalam penentuan pemeliharaan kawasan warisan; kajian kes: Bandar Taiping, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hamidi, Saidatul Rahah (2006) Sistem maklumat memori organisasi di FSKSM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mat Surin, Ely Salwana (2006) Sistem maklumat pengurusan berdasarkan kajian keberkesanan sistem maklumat kajian kes : Unit Penguatkuasa, Majlis Perbandaran Kulai (MPKu). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamad, Marlina (2006) Sistem maklumat pengurusan temujanji dan mesyuarat atas talian berdasarkan pendekatan CSCW. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Osman, Heti Aznin (2006) Sistem pembayaran saman secara MOBILE berorientasikan CRM bagi Polis Diraja Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Rahman, Azizul Rusmadi (2006) Sistem pengesanan dan diagnosa tahap kesihatan pusat kesihatan Universiti, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mahmod, Mohd. Khairi (2006) Sistem pengurusan inventori dan tempahan bersepadu berasaskan web : makmal jabatan pendidikan sains dan matematik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abd. Rahman, Mohd. Rosman (2006) Sistem pengurusan maklumat dan rawatan pergigian Pusat Kesihatan UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Ariffin, Mohd. Azreen (2006) Sistem pengurusan penyenggaraan bangunan bagi struktur konkrit bertetulang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Siti Nurbaya (2006) Sistem penilaian kenaikan pangkat pensyarah secara sistemetik berasaskan sistem bantuan keputusan berkumpulan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim, Siti Nurkhadijah Aishah (2006) Sistem penyelarasan belanjawan projek pembangunan perisian. Other thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Mohyin, Mohd. Johari (2006) Sistem perancangan kewangan islam : SPEKIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Tawyer, Hasniza (2006) Sistem perkongsian dan pengurusan sumber secara atas talian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ibrahim, Shahizam (2006) Sistem perniagaan internet : Anggunasia.com. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdurahaman Muftah, Basem Mustafa (2006) Smart surveillance using PDA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sidek, Salman Firdaus (2006) Smartcard authentication using fingerprint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wee, Aida Sze Chia (2006) Software development for water pricing model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Salam, Nurul Hazra (2006) Solving inverse kinematics using kohonen network for 3D human walking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abu Samah, Mazlan (2006) Solving the MASUM sport league scheduling problem using hybrid genetic algorithm and constraint-based reasoning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamad, Masurah (2006) Spam filtering using bayesian technique based on independent feature selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed Shabeer, Mohamed Shabeer (2006) Spectrum slicing of a broadband light source. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Yusoff, Hanis (2006) Stability of cypermethrin against a prepared high surface area magnesium oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Desa, Zairul Nor Deana (2006) Statistical approach on grading: mixture modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Osman Ali, Hassan (2006) Stress analysis and fatigue life prediction of a wobble-plate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, King Jye (2006) Stress analysis of femur and femoral stems for hip arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yaacob, Mohamad Hadzri (2006) Stripping voltammetric methods for the determination of aflatoxin compounds. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kamarudin, Khairul Sozana Nor (2006) Structural and gas adsorption characteristics of zeolite adsorbents. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Maharsi, Indra Wening (2006) Structural design and analysis of a microturbine compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Zair Asrar (2006) Structural design and analysis of a new symmetrical multi - stage wobble - plate compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Hussein, Abdel Wahab Mohamed (2006) Structure and properties of germanium phosphate based glasses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ong, Lai Mun (2006) Studies on performance of standard and non-standard configuration of Franklin Air terminals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tee, Shiau Foon (2006) The study of fluorescence enhancing and quenching effect of luminescent materials in sol gel for the detection of gases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Latif Azmi, Noraziah Azmin (2006) The study of problems faced by property management in managing the high rise condominium in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koo, Chai Hoon (2006) A study of the plastic life cycle assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kang, Lap Hoong (2006) A study on chemical precipitation and electrochemical precipitation as a pre-treatment on electroplating wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jemaat, Zulkifly (2006) A study on demulsification of stable water-in-crude oil emulsions : chemical and microwave approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ridha, Firas Noori (2006) A study on high-pressure adsorption and desorption of methane, ethane, propane and their mixtures on porous adsorbents. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdullah, Rini Asnida (2006) A study on stress-strain behaviour of granite and sandstone using closed-circuit servo-controlled testing machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chieng, Yu Yuan (2006) A study on structural and gas adsorptive characteristics of metal oxide modified zeolite adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chai, Beng Chung (2006) Submarine pipeline routing and inspection with geographical information system technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering; Hydrography.

Md. Sa'at, Siti Kamariah (2006) Subsurface flow and free water surface flow constructed wetland with magnetic field for leachate treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainuddin, Sabri (2006) The sufficiency of current training curricullum for different industries and adequacy of the minimum academic requirement for safety and health officer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Said, Ettysha (2006) Supply chain management in a packing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Technology.

Olanrewaju, Oladokun Sulaiman (2006) Sustainable maintenance of navigation channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tee, Jia Chee (2006) Synthesis and characterisation of multi-walled carbon nanotubes on supported catalysts via catalytic chemical vapour deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Eng Poh (2006) Synthesis and characterization of sulphated AIMCM-41 and its catalytic activity in dibenzoylation of biphenyl with benzoyl chloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat Zain, Norashikin (2006) Synthesis of polyethersulfone ultrafiltration membranes with different molecular weights polyethylene glycol as additives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim, Chai Heng (2006) System performance of a composite stepped-slope floating breakwater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Salim, Nurulhanah (2006) Tahap kualiti perkhidmatan fasiliti persepsi pengguna terhadap pengurusan fasiliti secara penyumber luar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Su, Chai Siik (2006) The teaching of lexical collocations and its effects on the quality of essays and knowledge of collocations among students of program persediaan Ijazah Sarjana Muda Pendidikan of Institut Perguruan Batu Lintang, Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Tan, Wooi Nee (2006) Theory of bichromatic wave groups amplitude amplification using implicit variational method. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Mohd Sa'at, Fatimah Al-Zahrah (2006) Thermal analysis of microchannel heat sink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saman, Fadhlina Izzah (2006) Three-term backpropagation algorithm for classification problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd Yusof, Norfadzlia (2006) Time series modeling and designing and artificial neural network (ANN) for revenue forecasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohamed, Adam (2006) Tingkahlaku penagihan semula punca-punca penagihan dan pemulihan kerohanian menurut perspektif Islam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Samsudin, Salbihana (2006) Tinjauan tentang faktor kesediaan pelajar dan guru serta pengaruhnya ke atas pencapaian sains pelajar di dalam PPSMI di sekolah menengah luar bandar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Sulaiman, Shaharin (2006) Towards a more managable and secure desktop systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kassim, Alisah (2006) Training management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mokhtar, Nadiah (2006) Treatment of acidic raw water using limestone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdu Samad, Norlizawaty (2006) Treatment of cyanide and phenol of corn wet milling industry effluent using sequencing batch reactor (SBR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ooi, Boon Siew (2006) Treatment of palm oil mill secondary effluent (POMSE) using fenton oxidation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussain, Rosmalah (2006) Tunggakan caj perkhidmatan perumahan strata : kajian kes : perumahan strata Dewan Bandaraya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ng, Chai Ling (2006) Tuning of learning parameters for backpropagation network using an improved genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Nadeson, Pathmanathan Chinnan (2006) An ultra wideband (UWB) microstrip patch antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Mazni (2006) Ultrasonic assisted extraction of mineral oil from spent fuller earth : a pilot scale study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Bakri, Mustafa (2006) Ultrasonic machining of ternary titanium aluminide intermetallic alloys using taguchi approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Ali, Che Fuziah (2006) University asset management system (UniAMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Samsudin, Sarimah (2006) The upgrading of Mykid intialization system for IRIS Corporation Berhad (IRIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdullah, Mohd. Yazid (2006) Urban stormwater management for property development projects in Selangor and Negeri Sembilan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Latiff, Juraimi (2006) Usaha sama pelancongan desa - penilaian prinsip faedah bertanding mampan (sustainable competitive advantages): program homestay Tanjung Piai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Salleh, Berhannudin (2006) Use of an online forum to promote use english language among engineering undergraduates. PhD thesis, Universiti Teknologi Malaysia, Fakulti Pendidikan.

Chan, Valerie Sue Lin (2006) The use of Microsoft® Powerpoint® to learn english language among UiTM pre-diploma students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Sim, Jacqueline Phek Kim (2006) The use of problem-based learning in an english for occupational purposes classroom among final semester students of Diploma in Office Management and Technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Lee, Euphrasia Chin Yan (2006) Using an adapted version of reciprocal teaching to teach reading comprehension to low english proficiency learners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Chin, Chui Vui (2006) Using geographical information system - multiple regression analysis - generated location value response surface approach to model locational factor in the prediction of residential property values. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah, Nurul Aleena Ruman (2006) Using whole word approach to teach reading to form one students with reading difficulties in a selected rural secondary school in Samarahan district of Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamed, Siti Mariam (2006) Utilization of texture analysis and fusion technique for oil spill detection using radarsat-1 SAR data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Gunasagaran, Kavitha (2006) The UTM students' perspective on cooperative learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Syed Mustaffah, Sharifah Azma (2006) Variable speed drives as energy efficient strategy in pulp and paper industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Nor Hayati (2006) Variation orders in Universiti Teknologi Malaysia (UTM) construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misha, Suhaimi (2006) Variational method in the design of an optimum solar water heater storage tank. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suriani, Nor Surayani (2006) Vessels classification. Masters thesis, Universiti Teknologi Malaysia.

Nik Jaafar, Nik Nazariah (2006) The viability of re - developing Kampung Baru within the ambit of current planning structure and matket condition from financial and social perspectives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Yow, Kah Lun (2006) Voidable and void construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Eh Rak, Aweng (2006) Water quality and shellfish related gastrointestinal disease cases in Kota Bharu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sukiman, Safura Adeela (2006) Web-based property management system. Masters thesis, Universiti Teknologi Malaysia.

Kamsir, Abdul Sukur (2006) Wire electrical discharge machining of Ti-48Al intermetalic alloys using taguchi approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Awadelkarim, Awad Mohed (2006) An XML-based model for integrating and managing label-based access control of heterogeneous legacy databases. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zubairi, Saiful Irwan (2006) The yield and biological activity (LC50) of rotenone extracted from Derris elliptica. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

This list was generated on Tue Oct 15 13:23:07 2024 +08.