Items where Subject is "T Technology"

Article

Md Sarip, Mohd. Sharizan and Morad, Noor Azian and Mohamad Ali, Nor Azah and Mohd. Yusof, Yasmin Anum and Che Yunus, Mohd. Azizi (2014) The kinetics of extraction of the medicinal ginger bioactive compounds using hot compressed water. Separation and Purification Technology, 124 . pp. 141-147. ISSN 1383-5866

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaluddin, Khairur Rijal and Mat Nor, F. (2014) The influence of SS316l foam fabrication parameter using powder metallurgy route. Advanced Materials Research, 974 . pp. 174-178. ISSN 1022-6680

Mat Noor, Fazimah and Zain, M. I M and Jamaludin, Khairur Rijal and Hussin, R. and Kamdi, Zakiah and Ismail, Ahmad Fauzi and Ahmad, Sufizar and Mohd. Taib, Hariati (2014) Potassium bromide as space holder for titanium foam preparation. 4TH MECHNICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 465-46 . pp. 922-926. ISSN 1660-9336

Aris, Nor Ilia Anisa and Morad, Noor Azian (2014) Effect of extraction time on degradation of bioactive compounds (Zingiber officinale roscoe). Jurnal Teknologi (Sciences and Engineering), 67 (4). pp. 63-66. ISSN 2180-3722

Ab. Aziz, Nur Fadillah and Mohd. Yusof, Othman and Che Hassan, Rozaimi and Sulaiman, Saiful Aman and Said, Md. Azlan Shah (2014) An acoustic ground discrimination system to mapping sea-bed feature classes. Proceedings - 2014 5th IEEE Control and System Graduate Research Colloquium, ICSGRC 2014 . pp. 91-95.

Abas, Norzaida and Mohd. Daud, Zalina and Yusof, Fadhilah (2014) A comparative study of mixed exponential and Weibull distributions in a stochastic model replicating a tropical rainfall process. Theoretical and Applied Climatology, 118 (3). pp. 597-607. ISSN 0177-798X

Abbasi, Hossein and Mohd Daud, Salwani and Amir Sjarif, Nilam Nur and Abbasi, Morteza and Adam, Mohamad Zulkefli and Yuhaniz, Siti Sophiayati (2016) Gradual color clustering elimination for outdoor image segmentation. Opoijien International Journal of Informatics Oiji, 4 (1). pp. 25-31. ISSN 2289-2370

Abd. Aziz, Nur Suhaili and Nishiyama, Tomoya and Rusli, Nurul Izni and Mahmood, Mohamad Rusop and Yasui, Kanji and Hashim, Abdul Manaf (2014) Seedless growth of zinc oxide flower-shaped structures on multilayer graphene by electrochemical deposition. Nanoscale Research Letters, 9 . ISSN 1556-276X

Abd. Rahim, A. F. and Hashim, M. R. and Ali, N. K. and Hashim, Abdul Manaf and Rusop, M. and Abdullah, M. H. (2014) The evolution of Si-capped Ge islands on Si (100) by RF magnetron sputtering and rapid thermal processing: the role of annealing times. Microelectronic Engineering, 126 . pp. 134-142. ISSN 0167-9317

Abdul Latiff, Liza and Abu, Aminudin and Moneer, Ali Lilo (2016) Identify and classify vibration fault based on artificial intelligence techniques. Journal of Theoretical and Applied Information Technology, 94 (2). pp. 464-473. ISSN 1992-8645

Aghayan, M. and Zak, Ali Khorsand and Behdani, M. and Hashim, Abdul Manaf (2014) Sol-gel combustion synthesis of Zr-doped BaTiO3 nanopowders and ceramics: Dielectric and ferroelectric studies. Ceramics International, 40 (10). p. 16146. ISSN 0272-8842

Abdul Rachman, Mahyudin and Prasetyo, Joni (2014) Electricity from bio-waste-based gas hydrogen as a source of renewable energy biomass. 2014 International Conference on Informatics, Electronics and Vision, ICIEV 2014 .

Abdullah, Ezzat Chan and Kow, Kien Woh and Yusoff, Rozita and Abdul Raman, Abdul Aziz (2016) Determination of kinetic parameters for thermal decomposition of bamboo leaf to extract bio-silica. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 38 (21). pp. 3249-3254. ISSN 1556-7036

Abdullah, Morina and Mohamed Shaharoun, Awaluddin and Azman, Azri (2014) Review current practical skills assessment in machining course based on psychomotor domain. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 171-175.

Abdullah, S. N. H. S. and Sudin, M. N. and Prabuwono, A. S. and Mantoro, T. (2012) License plate detection and segmentation using cluster run length smoothing algorithm. Journal of Information Technology Research, 5 (3). pp. 46-70. ISSN 1938-7857

Abdulzahra, Hayfaa Atee and Ahmad, Robiah and Mohd. Noor, Norliza and Abidulkarim, Kadhim Ilijan (2017) Advanced encryption standard algorithm versus extreme learning machine based weight: a comparative study. ARPN Journal of Engineering and Applied Sciences, 12 (3). pp. 849-855. ISSN 1819-6608

Abolghasemi, Maryam and Ghafourian, Kambiz and Ismail, Syuhaida and Ali, Asghar Bavafa and Mohamed, Zainai (2017) Sustainable construction and demolition waste management in Malaysia: current issues. Jurnal Kemanusiaan, 26 (1). pp. 21-31. ISSN 1675-1930

Abu, M. and Rahim, M. K. A. (2012) Single band zig zagdipole AMC. Jurnal Teknologi, 58 . pp. 19-25. ISSN 0127-9696

Abu, Mohd. Yazid and Jamaludin, Khairur Rijal (2014) Application of Mahalanobis-Taguchi system on crankshaft as remanufacturing automotive part: a case study. Advanced Materials Research, 845 . pp. 883-888. ISSN 1022-6680

Abu, Mohd. Yazid and Jamaludin, Khairur Rijal and Abdul Sani, Amiril Sahab and Abdullah, Tajul Ariffin and Abdul Wahab, Dzuraidah (2014) An application of failure mode and effect analysis to cylinder head during dismantle of remanufacturing process: a case study. Advanced Materials Research, 845 . pp. 841-851. ISSN 1022-6680

Abu Bakar, Nooh and Jalaliyoon, Neda and Mohammadi, Hamed Taherdoost (2014) Propose a methodology to implement balanced scorecard for operational appraisal of industrial groups. 7th International Conference Interdisciplinarity in Engineering (INTER-ENG 2013), 12 . pp. 659-666. ISSN 2212-0173

Abu Hassan, Hasliza and Ooi, Chia Yee (2014) Thermal model with metal consideration for System-On-Chip testing. Journal of Low Power Electronics, 10 (3). pp. 325-333. ISSN 15461998

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Najafian, Gholamhossein (2014) Prediction of extreme values of offshore structural response by an efficient time simulation technique. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 4A .

Admon, Mohd. Ariff and Kasim, A. R. M. and Shafie, S. (2011) Unsteady free convection flow over a three-dimensional stagnation point with interl heat generation or absorption. Proceedings of World Academy of Science, Engineering and Technology, 75 . pp. 531-536. ISSN 2010-376X

Admon, Mohd. Ariff and Shafie, Sharidan and Pop, Ion (2011) Unsteady free convection near the stagnation point of a three-dimensional body. Journal of Applied Sciences, 11 (7). pp. 1441-1444. ISSN 1812-5654

Afzali, Afsaneh and Moh'd. Rashid, Moh'd. Rashid and Baharun, Sabariah and Mat, Ramli (2014) PM10 pollution: its prediction and meteorological influence in Pasir Gudang, Johor. 8th International Symposium of The Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Afzali, Afsaneh and Mohd. Yusof, Mohd. Rashid and Kusnin, Noorhafizah and Mohd. Rashid, Ammar (2014) Evaluating human exposure to emission from incineration plant using AERMOD dispersion modeling. Iranian Journal of Public Health, 43 . pp. 25-33. ISSN 0304-4556

Ahmad, Azuan and Idris, Norbik Bashah and Kama, Mohd. Nazri (2017) Cloudids: cloud intrusion detection model inspired by dendritic cell mechanism. International Journal of Communication Networks and Information Security, 9 (1). pp. 67-75. ISSN 2076-0930

Ahmad, Fauzan and Ibrahim, Mohd. Haniff and Sulaiman, Wadi Harun and Zuikafly, Siti Nur Fatin and Muhamad Apandi, Nur Hidayah (2016) Bismuth (III) Telluride (Bi2Te3) embedded in PVA as a passive saturable absorber in a 2 micron region. Photonics Letters of Poland, 8 (4). pp. 101-103. ISSN 2080-2242

Haris, Hazlihan and Sulaiman, Wadi Harun and Muhammad, Ahmad Razif and Caroline, Livan Anyi and Tan, Sin Jin and Ahmad, Fauzan and Roslan, Md. Nor and Nurul, Rozullyah Zulkepely and Arof, Hamzah (2017) Passively q-switched erbium-doped and ytterbium-doped fibre lasers with topological insulator bismuth selenide (Bi2Se3) as saturable absorber. Optics and Laser Technology, 88 . pp. 121-127. ISSN 0030-3992

Ahmad, Fauzi and Mazlan, Saiful Amri and Zamzuri, Hairi and Jamaluddin, Hishamuddin and Hudha, Khisbullah and Short, M. (2014) Modelling and validation of the vehicle longitudinal model. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 2042-2056. ISSN 2229-8649

Ahmad, Nor Lela and Mohd. Yunus, Noor Azlina and Wan Rashid, Wan Edura and Norol, Hamiza Zamzuri and Nik Mahmood, Nik Hasnaa and Shamsuddin, Shuhana (2016) Theorizing event attendees' behavior to increase the demand for sustainable events. International Business Management, 10 (17). pp. 3853-3859. ISSN 1993-5250

Ahmad, Nurul Fariha and Kanji, Yasui and Hashim, Abdul Manaf (2014) Seed/catalyst-free vertical growth of high-density electrodeposited zinc oxide nanostructures on a single-layer graphene. Nanoscale Research Letters, 9 . ISSN 1556-276X

Ahmad, Nurul Fariha and Rusli, Nurul Izni and Mahmood, Mohamad Rusop and Kanji, Yasui and Hashim, Abdul Manaf (2014) Seed/catalyst-free growth of zinc oxide nanostructures on multilayer graphene by thermal evaporation. Nanoscale Research Letters, 9 . ISSN 1556-276X

Ahmad, Robiah and Abdul Rahim, Abdul Rahman and Memari, Ashkan (2014) Production planning and inventory control in automotive supply chain networks. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8481 L (PART 1). pp. 430-439. ISSN 0302-9743

Ahmad, Robiah and M.Samsuri, Saiful Farhan and Zakaria, Mohd. Zakimi (2012) Evapotranspiration prediction using system identification and genetic algorithm. Proceedings Of The Iasted International Conference On Modelling, Identification, And Control, Mic . pp. 176-183. ISSN 1025-8973

Ahmad Azli, Naziha and Mohamad Nordin, Norjulia and Nik Idris, Nik Rumzi (2012) Direct torque control of multilevel inverterfed induction machines - a survey. Journal Of Theoretical And Applied Information Technology, 41 (2). pp. 181-191. ISSN 1992-8645

Ahmad Latiffi, Aryani and Brahim, Juliana and Fathi, Mohamad Syazli (2014) The development of building information modeling (BIM) definition. Applied Mechanics and Materials, 567 . pp. 625-630. ISSN 1660-9336

Ahmad Nazri, Muhammad Naguib and Ismail, Zool Hilmi and Yusof, Rubiyah (2016) Fault detection and diagnosis using cubature kalman filter for nonlinear process systems. Journal of Telecommunication, Electronic and Computer Engineering, 8 (11). pp. 63-67. ISSN 2180-1843

Al-Ameen, Zohair and Sulong, Ghazali and Md. Johar, Md. Gapar (2012) Reducing the gaussian blur artifact from ct medical images by employing a combination of sharpening filters and iterative deblurring algorithms. Journal of Theoretical and Applied Information Technology, 46 (1). pp. 31-36. ISSN 1992-8645

Albaham, Ammer Tawfik (2012) Quality-biased retrieval in online forums. Journal Of Theoretical And Applied Information Technology, 38 (1). pp. 55-62. ISSN 1992-8645

Alighian, R. and A. Rahman, A. B. and Ibrahim, R. B. (2011) Information and communication technology (ICT) policy; significances, challenges, issues and future research framework. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 963-969. ISSN 1991-8178

Amir, H. Tarighaleslami and Timothy, G. Walmsley and Martin, J. Atkins and Michael, R. W. Walmsley and Liew, Peng Yen and James, R. Neale (2017) A unified total site heat integration targeting method for isothermal and non-isothermal utilities. Energy, 119 . pp. 10-25. ISSN 0360-5442

Aras, M. S. M. and Mohd. Nor, A. S. and Abdullah, Shahrum Shah and Rashid M., Z. A. and Jamali, A. (2013) Development of Subsea Altimeter Sensor System (SASS) using portable sonar sensor fish finder alarm for unmanned underwater vehicles. International Journal on Recent Trends in Engineering & Technology, 8 (2). pp. 110-115. ISSN 2158-5563

Asako, Yutaka and Faghri, Mohammad (2017) Modification of simple algorithm to handle natural convection flows with zero-isothermal compressibility. International Journal of Heat and Mass Transfer, 106 . pp. 177-182. ISSN 0017-9310

Baharun, Sabariah and Mohammad Yusof, Yudariah and Abdul Rahman, Roselainy and Ismail, Zaleha (2017) Invoking and supporting engineering student mathematical thnking in informal cooperative learning classroom. Sains Humanika, 9 (1-2). pp. 33-38. ISSN 2289-6996

Batumalay, Malathy and Rahman, H. A. and Kam, Wern and Ong, Yong Sheng and Ahmad, Fauzan and Zakaria, Rozalina and Harun, Sulaiman Wadi and Ahmad, H. (2014) Evaluation of the tapered PMMA fiber sensor response due to the ionic interaction within electrolytic solutions. Journal of Modern Optics, 61 (2). pp. 154-160. ISSN 0950-0340

Bee, Soo Tuen and Hassan, Azman and Abu Bakar, Aznizam (2012) Mechanical properties of talc- and (calcium carbonate)-filled poly(vinyl chloride) hybrid composites. Journal Of Vinyl And Additive Technology, 18 (2). pp. 76-86. ISSN 1083-5601

Beheshti, Zahra and Shamsuddin, Siti Mariyam and Yuhaniz, Siti Sophiayati (2012) Binary accelerated particle swarm algorithm (BAPSA) for discrete optimization problems. Journal of Global Optimization . pp. 1-25. ISSN 0925-5001

Che Hasan, Rozaimi and Ierodiaconou, Daniel A. and Laurenson, Laurie J. B. and Schimel, Alexandre C. G. (2014) Integrating multibeam backscatter angular response, mosaic and bathymetry data for benthic habitat mapping. Plos One, 9 (5). ISSN 1932-6203

Che Mohd. Yusoff, Rasimah and Badioze Zaman, Halimah and Ahmad, Azlina (2011) Evaluation of user acceptance of mixed reality technology. Australasian Journal of Educational Technology, 27 (8). pp. 1369-1387. ISSN 1018-4864

Che Sidik, Nor Azwadi and Adamu, Isa Muhammad and Muhammad, Mahmud Jamil and R. Kefayati, G. H. and Mamat, Rizalman and Najafi, G. (2016) Recent progress on hybrid nanofluids in heat transfer applications: a comprehensive review. International Communications in Heat and Mass Transfer, 78 . pp. 68-79. ISSN 0735-1933

Chelliapan, Shreeshivadasan and Roudi, Anita Maslahati and Roudi, Amin Maslahati (2014) Quality and quantity of municipal solid waste in Mashhad. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (1). pp. 101-109. ISSN 0975-8585

Cheng, Tung Chong and Sochgreb, Simone (2012) Spray combustion characteristic of palm biodesiel. Combustion Science and Technology, 184 (7-8). ISSN 0012-2202

Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Mohamed Shaharoun, Awaluddin and Ismail, Syuhaida and Klemes, Jiri Jaromir (2014) Sustainable enterprise resource planning: imperatives and research directions. Journal of Cleaner Production, 71 . pp. 139-147. ISSN 0959-6526

Chong, Heap Yih and Preece, Christopher Nigel (2014) Improving construction procurement systems using organizational strategies. Acta Polytechnica Hungarica, 11 (1). pp. 5-20. ISSN 1785-8860

Darbanhosseiniamirkhiz, Darbanhosseiniamirkhiz and Wan Ismail, Wan Khairuzzaman (2012) Advanced manufacturing technology adoption in SMEs: an integrative model. Journal of Technology Management and Innovation, 7 (4). pp. 112-120. ISSN 0718-2724

Daud, Zawawi and Abubakar, Mahmoud Hijab and Abdul Kadir, Aeslina and Abdul Latiff, Abdul Aziz and Awang, Halizah and Abdul Halim, Azhar and Marto, Aminaton (2017) Adsorption studies of leachate on cockle shells. International Journal of Geomate, 12 (29). pp. 46-52. ISSN 2186-2990

Dolah, Rozzeta and Miyagi, Zenichi and Bergman, Bo (2014) Outliers effect in measurement data for T-peel adhesion test using Robust parameter design. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 77-81. ISSN 0127-9696

Durdyev, Serdar and Ihtiyar, Ali and Ismail, Syuhaida and Sh. Ahmad, Fauziah (2014) Productivity and service quality: factors affecting in service industry. 2nd World Conference on Business, Economics and Management, 109 . pp. 487-491. ISSN 1877-0428

Durdyev, Serdar and Omarov, Maksat and Ismail, Syuhaida (2017) Causes of delay in residential construction projects in Cambodia. Cogent Engineering, 4 (1). UNSP1291117-UNSP1291117. ISSN 2331-1916

Elfagih, Fawzi Mohamed and Amin, Nor Aishah Saidina (2014) Applying response surface methodology to assess the combined effect of process variables on the composition and octane number of reformat in the process of reducing aromatization activity in catalytic naphtha reforming. Reaction Kinetics Mechanisms and Catalysis, 111 (1). pp. 89-106. ISSN 1878-5190

Eslaminejad, Mohammadreza and Abd. Razak, Shukor and Ismail, Abdul Samad (2012) Eedars: an energy-efficient dual-sink algorithm with role switching mechanism for event-driven wireless sensor networks. KSII Transactions on Internet and Information Systems, 6 (10). pp. 2473-2492. ISSN 1976-7277

Ghaderian, Javad and Che Sidik, Nor Azwadi (2017) An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector. International Journal of Heat and Mass Transfer, 108 . pp. 972-987. ISSN 0017-9310

Ghafourian, Kambiz and Mohamed, Zainai and Ismail, Syuhaida and Malakute, Roya and Abolghasemi, Maryam (2016) The 100 most cited scientific papers in construction and demolition waste management. Research Journal of Applied Sciences, Engineering and Technology, 13 (09). pp. 741-749. ISSN 2040-7459

Ghani Al-Mashhadani, Ihsan Ali and Che Sidik, Nor Azwadi and Kamaruzaman, Natrah and Yahya, Wira Jazair and Mahian, Omid (2017) The effect of manifold zone parameters on hydrothermal performance of micro-channel heatsink: a review. International Journal of Heat and Mass Transfer, 109 . pp. 1143-1161. ISSN 0017-9310

Ghani Al-Mashhadani, Ihsan Ali and Kamaruzaman, Natrah and Che Sidik, Nor Azwadi (2017) Heat transfer augmentation in a microchannel heat sink with sinusoidal crossmark cavities and rectangular ribs. International Journal of Heat and Mass Transfer, 108 . pp. 1969-1981. ISSN 0017-9310

Goudarzi, Shidrokh and Hassan, Wan Haslina and Anisi, Mohammad Hossein and Soleymani, Seyed Ahmad (2017) Mdp-based network selection scheme by genetic algorithm and simulated annealing for vertical-handover in heterogeneous wireless networks. Wireless Personal Communications, 92 (2). pp. 399-436. ISSN 0929-6212

Habidin, Nurul Fadly and Mohd. Yusof, Sha'ri and Mohd. Fuzi, Nursyazwani (2016) Lean six sigma, strategic control systems, and organizational performance for automotive suppliers. International Journal of Lean Six Sigma, 7 (2). pp. 110-135. ISSN 2040-4166

Hafiz Fahami, Sheikh Muhammad and Zamzuri, Hairi and Mazlan, Saiful Amri and Saruchi, Sarah Atifah (2014) The variable steering ratio for vehicle steer by wire system using hyperbolic tangent method. Applied Mechanics and Materials, 575 . pp. 781-784. ISSN 1660-9336

Hajalilou, Abdollah and Mazlan, Saiful Amri and Abbasi, Mehrdad and Lavvafi, Hossein (2016) Fabrication of spherical cofe2o4 nanoparticles with a sol-gel and hydrothermal method and their magnetorheological characteristics. RSC Advances, 6 (92). pp. 89510-89522. ISSN 2046-2069

Hakim, Luqman and Alias, Ekram and Makpol, Suzana and Wan Ngah, Wan Zurinah and Morad, Noor Azian and Mohd. Yusof, Yasmin Anum (2014) Gelam honey and ginger potentiate the anti cancer effect of 5-FU against HCT 116 colorectal cancer cells. Asian Pacific Journal of Cancer Prevention, 15 (11). pp. 4651-4657. ISSN 1513-7368

Hambali, Nur Ashikyn and Yahaya, Hafizal and Mahmood, Mohamad Rusop and Terasako, Tomoaki and Hashim, Abdul Manaf (2014) Synthesis of zinc oxide nanostructures on graphene/glass substrate by electrochemical deposition: effects of current density and temperature. Nanoscale Research Letters, 9 (1). ISSN 1931-7573

Hamed Ahmed, Sharaf Eldin and Mohd. Yusof, Sha'ri (2016) Ranking critical success factors for sustaining total quality management in engineering sector in Sudan. International Journal of Applied Engineering Research, 11 (21). pp. 10708-10715. ISSN 0973-4562

Hashim, Abdul Manaf and Mustafa, Farahiyah (2014) RF-to-DC characteristics of direct irradiated on-chip gallium arsenide schottky diode and antenna for application in proximity communication system. Sensors, 14 (2). pp. 3493-3505. ISSN 1424-8220

Hashim, Mazlan and Mohd., Noor Norzailawati and Marghany, Maged Mahmoud (2011) Modeling sprawl of unauthorized development using geospatial technology: case study in Kuantan district, Malaysia. International Journal of Digital Earth, 4 (3). pp. 223-238. ISSN 1753-8947

Hassan, Mohamad Zaki and Umer, R. and Balawi, S. and Cantwell, W. J. (2014) The impact response of environmental-friendly sandwich structures. Journal of Composite Materials, 48 (25). pp. 3083-3090. ISSN 0021-9983

Hau, Yuan Wen and Ooi, Chia Yee and Shaikh Husin, Shaikh Nasir @ Nasir and Marsono, Muhammad Nadzir and Tan, Tze Hon (2014) Remote dynamically reconfigurable platform using NetFPGA. IEEE International Symposium on Circuits and Systems . pp. 1239-1242. ISSN 0271-4310

Hayfaa, Abdulzahra Atee and Ahmad, Robiah and Mohd. Noor, Norliza and S. Rahma, Abdul Monem and Aljeroudi, Yazan (2017) Extreme learning machine based optimal embedding location finder for image steganography. Plos One, 12 (2). E0170329-E0170329. ISSN 1932-6203

Hendrianto Pratomo, Awang and Prabuwono, Anton Satria and Abdullah, Saman and Nasrudin, Mohammad Faidzul and Shohaimi, Muhamad Syafiq and Mantoro, Teddy (2012) Adaptive robot soccer defence strategy via behavioural trail. Journal of Information Technology Research, 5 (3). pp. 25-45. ISSN 1938-7857

Honarpour A., Amir and Jusoh, Ahmad and Md. Nor, Khalil (2012) Knowledge management, total quality management and innovation: a new look. Journal of Technology Management and Innovation, 7 (3). pp. 22-31. ISSN 0718-2724

Hordri, Nur Farhana and Samar, Alireza and Yuhaniz, Siti Sophiayati and Shamsuddin, Siti Mariyam (2017) A systematic literature review on features of deep learning in big data analytics. International Journal of Advances in Soft Computing and its Applications, 9 (1). pp. 32-49. ISSN 2074-8523

Hui, K. H. and Hee, Lim Meng and Leong, Mohd. Salman and Abdelrhman, Ahmed M. (2014) Time-frequency signal analysis in machinery fault diagnosis: review. Advanced Materials Research, 845 . pp. 41-45. ISSN 1022-6680

Hui, K. H. and Lim, Meng Hee and Leong, M. Salman (2014) Equipment aging, aging detection, and aging management: a review. Applied Mechanics and Materials, 575 . pp. 935-938. ISSN 1660-9336

Hum, Yan Chai and Lai, Khin Wee and Tan, Tian Swee and Shaikh Salleh, Sheikh Hussain and Ariff, A. K. and Kamarulafizam, Kamarulafizam (2011) Gray-level co-occurrence matrix bone fracture detection. American Journal of Applied Sciences, 8 (1). pp. 26-32. ISSN 1546-9239

Hussein, Munirah and Yoneda, Kenichi and Othman, Nor'azizi and Zuhaida, Mohd. Zaki and Mohd. Yusof, Mohamed Hilmi (2017) Effects of number of connections and pipe length to the water losses in Melaka. Jurnal Teknologi, 79 (3). pp. 45-59. ISSN 0127-9696

Ikeda, Shoichiro and Kawasaki, Shinji and Nobumoto, Akinari and Ono, Hideo and Ono, Shinji and Mohamad, Rusop and Muhamad, Muhazli B. (2014) Preparation and applications of hydrophilic nano-carbon particles. NANOSCIENCE, NANOTECHNOLOGY AND NANOENGINEERING, 832 . pp. 767-772. ISSN 1022-6680

Islam, Shayla and Hashim, Aisha Hassan Abdalla and Habaebi, Mohamed Hadi and Hassan, Wan Haslina and Abdul Latif, Suhaimi and Mohd. Ramli, Huda Adibah and Hasan, Mohammad Kamrul (2014) Analytical evaluation of intra domain mobility approach in NEMO environment. Research Journal of Applied Sciences, Engineering and Technology, 7 (7). pp. 1139-1148. ISSN 2040-7459

Ismail, Hadibah and Abd. Wahab, Ahmad Khairi and Md. Amin, Mohd. For and Mohd. Yunus, Mohd. Zulkifli and Jaffar Sidek, Faridah and Jahromi, Bahman Esfandier (2012) A 3-tier tsunami vulnerability assessment technique for the north-west coast of Peninsular Malaysia. Natural Hazards, 63 . pp. 549-573. ISSN 0921-030X

Ismail, Issham and Illias, Rosli and Abd. Mubin, Amy Shareena and Machitin, Masseera (2012) Degrading drilling fluid filter cake using effective microorganisms. Jurnal Teknologi, 57 . pp. 1-24. ISSN 0127-9696

Ismail, Zool Hilmi and Mohd. Shah, Hairol Nizam and Esmail, Ali Alandoli and Sulaiman, Marizan and Ab. Rashid, Mohd. Zamzuri (2016) A review study on flexible link manipulators. Journal of Telecommunication, Electronic and Computer Engineering, 8 (2). pp. 93-97. ISSN 2180-1843

Izham, Mohamad Yusoff and Ujang, Muhamad Uznir and Abdul Rahman, Alias and Katimon, Ayob and Wan Ruslan, Ismail (2011) Influence of georeference for saturated excess overland flow modelling using 3D volumetric soft geo-objects. Computers and Geosciences, 37 (4). pp. 598-609. ISSN 0098-3004

Jahanshaloo, Leila and Che Sidik, Nor Azwadi and Fazeli, Alireza and Mahmoud, Pesaran Hajiabbas (2016) An overview of boundary implementation in lattice boltzmann method for computational heat and mass transfer. International Communications in Heat and Mass Transfer, 78 . pp. 1-12. ISSN 0735-1933

Jamaludin, Khairur Rijal and M. Amin, Sri Yulis and Muhamad, Norhamidi (2014) Rheological properties analysis of WC-Co injection feedstock. Materials Science Forum, 773-77 . pp. 880-886. ISSN 0255-5476

Jamei, Saeed and Abdul Malik, Adi Maimun and Mansor, Shuhaimi and Che Sidik, Nor Azwadi and Priyanto, Agoes (2016) Design parametric study of a compound wing-in-ground effect. I: aerodynamics performance. Journal of Aerospace Engineering, 29 (1). 04015022-04015022. ISSN 0893-1321

Jamei, Saeed and Hj Abdul Malik, Adi Maimun and Mansor, Shuhaimi and Che Sidik, Nor Azwadi and Priyanto, Agoes (2016) Design parametric study of a compound wing-in-ground effect. Ii: aerodynamics coefficients. Journal of Aerospace Engineering, 29 (1). pp. 1-14. ISSN 0893-1321

Jomehzadeh, Fatemeh and Nejat, Payam and John, Kaiser Calautit and Mohd. Yusof, Mohd. Badruddin and Shaikh Salim, Sheikh Ahmad Zaki and Ben, Richard Hughes and Muhammad Yazid, Muhammad Noor Afiq Witri (2017) A review on windcatcher for passive cooling and natural ventilation in buildings, part 1: indoor air quality and thermal comfort assessment. Renewable and Sustainable Energy Reviews, 70 . pp. 736-756. ISSN 1364-0321

Kar, Hoou Hui and Meng, Hee Lim and Ali Al-Obaidi, Salah Mahdi and Leong, Mohd. Salman @ Yew Mun (2017) Dempster-shafer evidence theory for multi-bearing faults diagnosis. Engineering Applications of Artificial Intelligence, 57 . pp. 160-170. ISSN 0952-1976

Kassim, Khairul Anuar and Mohammed Ahmed, Omar Babiker Elhaj (2011) Comparison of continuous dynamic probing with the standard penetration test for highly weathered limestone of Eastern Sudan. Electronic Journal of Geotechnical Engineering, 16 B . pp. 235-249. ISSN 1089-3032

Kefayatia, G. H. R. and Che Sidik, Nor Azwadi (2017) Simulation of natural convection and entropy generation of non-newtonian nanofluid in an inclined cavity using buongiorno's mathematical model (part ii, entropy generation). Powder Technology, 305 . pp. 679-703. ISSN 0032-5910

Khamis, Nor Hisham and Yahya, Azli and Khalil, Kamal and Mohamad Nor, Alif Syarafi (2016) Potential and sustainability of swiftlet industries in Malaysia. International Journal of Science and Applied Technology, 1 (1). pp. 1-7. ISSN 2528-7354

Khamsin, I. and Abdul Rahman, Muhammad Zulkarnain and Razak, Khamarrul Azahari and Rizal, S. (2014) Detection of tropical landslides using airborne lidar data and multi imagery: a case study in Genting Highland, Pahang. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Khan, A. and Sarmin, N. H. and Khan, F. M. and Davvaz, B. (2012) Regular ag-groupoids characterized by (∈, ∈ ∨ q k)-fuzzy ideals. Iranian Journal Of Science And Technology, Transaction A: Science, 36 (2). pp. 97-113. ISSN 1028-6276

Khanam, Shamsunnahar and Megat Mohd. Noor, Megat Johari (2014) A comparative static analysis of carbon tax policy and a 'Smart City-JB', Johor Bahru, Malaysia. 2014 International Conference on Informatics, Electronics and Vision, ICIEV 2014 .

Khnder, Abdolbaqi and Mamat, Rizalman and Che Sidik, Nor Azwadi and Wan Hamzah, Wan Azmi and Selvakumar, Selvakumar (2017) Experimental investigation and development of new correlations for heat transfer enhancement and friction factor of bioglycol/water based tio2 nanofluids in flat tubes. International Journal of Heat and Mass Transfer, 108 . pp. 1026-1035. ISSN 0017-9310

Khodadadi, Touraj and A. K. M., Muzahidul Islam and Baharun, Sabariah and Komaki, Shozo (2016) Evaluation of recognition-based graphical password schemes in terms of usability and security attributes. International Journal of Electrical and Computer Engineering (IJECE), 6 (6). pp. 2939-2948. ISSN 2088-8708

Khodadadi, Touraj and Islam, A. K. M. Muzahidul and Baharun, Sabariah and Shozo, Komaki (2014) Privacy issues and protection in secure data outsourcing. Jurnal Teknologi (Sciences and Engineering), 69 (6). pp. 59-61. ISSN 0127-9696

Kogiladas, Thines Raj and Mubarak, N. M. and Nizamuddin, Sabzoi and Sahu, J. N. and Abdullah, Ezzat Chan and Ganesan, P. (2017) Application potential of carbon nanomaterials in water and wastewater treatment: a review. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 116-133. ISSN 1876-1070

Komarudin, Komarudin and Wong, Kuan Yew (2012) Parameter tuning of ant system using fuzzy logic controller. International Journal Of Operational Research, 15 (2). pp. 125-135. ISSN 1745-7645

Kow, Kien-Woh and Yusoff, Rozita and Abdul Raman, Abdul Aziz and Abdullah, Ezzat Chan (2014) Thermal insulative performance of bamboo leaf aerogel opacified usingactivated carbon compared with carbon black. Advanced Materials Research, 941-94 . pp. 2482-2485. ISSN 1662-8985

Kurniawan, Denni and Mohamed Shaharoun, Awaluddin and Sudin, Izman and Hashemi, Heidar (2014) Recent developments on computer aided fixture design: case based reasoning approaches. Advances in Mechanical Engineering . ISSN 1687-8132

Kuwano, Noriyuki and Ryu, Yuki and Mitsuhara, Masatoshi and Chia, Hung Lin and Uchiyama, Shota and Maruyama, Takahiro and Suzuki, Yohei and Naritsuka, Shigeya (2014) Behavior of defects in a-plane GaN films grown by low-angle-incidence microchannel epitaxy (LAIMCE). Journal of Crystal Growth, 401 . pp. 409-413. ISSN 0022-0248

Leila, Ezzat Zadegan and Morad, Noor Azian and Yusof, Rubiyah (2016) Prediction and optimization of ethanol concentration in biofuel production using fuzzy neural network. Jurnal Teknologi, 78 (10). pp. 51-56. ISSN 0127-9696

Liew, Peng Yen and Timothy, G. Walmsley (2016) Heat pump integration for total site waste heat recovery. Chemical Engineering Transactions, 52 . pp. 817-822. ISSN 2283-9216

Lim, Meng Hee and Leong, Mohd. Salman and Hui, K. H. (2014) Analysis of residual wavelet scalogram for machinery fault diagnosis. Advanced Materials Research, 845 . pp. 113-117. ISSN 1022-6680

Lim, Meng Hee and Leong, Mohd. Salman and Hui, K. H. (2014) Blade faults classification and detection methods: review. Advanced Materials Research, 845 . pp. 123-127. ISSN 1022-6680

Lim, Meng Hee and Leong, Mohd. Salman @ Yew Mun (2014) Reconstruction of vital blade signal from unsteady casing vibration. Advances in Mechanical Engineering, 2014 . ISSN 1687-8132

Lim, Thol Yong and Yeong, Che Fai and Lee Ming, Eileen Su (2016) A review of sensor technology and sensor fusion methods for map-based localization of service robot. Jurnal Teknologi, 78 (7-5). pp. 23-30. ISSN 2180-3722

Lim, Thol Yong and Yeong, Che Fai and Su, Eileen Lee Ming and Chik, Sheng Fei and Chin, Patrick Jun Hua and Tan, Ping Hua (2016) Performance evaluation of various 2-d laser scanners for mobile robot map building and localization. Journal of Telecommunication, Electronic & Computer Engineering, 8 (11). pp. 105-109. ISSN 21801843

Liu, Wen Hui and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Liew, Peng Yen and Ho, Wai Shin (2017) Technical & economic evaluation of district cooling system as low carbon alternative in Kuala Lumpur City. Chemical Engineering Transactions, 56 . pp. 529-534. ISSN 2283-9216

M., Abdur Razzak and Taskin Bhuiyan, Wahida and Nawrin Islam, Natasha and A. K. M., Muzahidul Islam and Mohammed Amin, Muhamad Kamal (2016) Design of a grid-connected photovoltaic inverter with maximum power point tracking using perturb and observe technique. International Journal of Power Electronics and Drive Systems, 7 (4). pp. 1212-1220. ISSN 2088-8694

M. Abdelrhman, Ahmed and Lim, Meng Hee and Leong, Mohd. Salman and Al-Obaidi, Salah M. Ali (2014) Condition monitoring of blade in turbomachinery: a review. Advances in Mechanical Engineering . ISSN 1687-8132

M. Amin, Sri Yulis and Muhamad, Norhamidi and Jamaludin, Khairur Rijal (2014) Dynamic response optimization for cemented carbide injection molding. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 41-44. ISSN 0127-9696

M. Idris, Khairulnizam and Setan, Halim and Abbas, Mohd. Azwan and Chong, Albert K. and Lau, Chong Luh and Mohd. Ariff, Mohd. Farid (2013) Improvement in accuracy for threedimensional sensor (Faro Photon 120 Scanner). IJCSI International Journal of Computer Science, 10 (1). pp. 176-182. ISSN 1694-0814

M'hamed, Beriache and Che Sidik, Nor Azwadi and Muhammad Yazid, Muhammad Noor Afiq Witri and Mamat, Rizalman and Najafi, G. and R. Kefayati, G. H. (2016) A review on why researchers apply external magnetic field on nanofluids. International Communications in Heat and Mass Transfer, 78 . pp. 60-67. ISSN 0735-1933

Maan, Normah and Baharun, Sabariah and Mohd. Yusof, Mohd. Rashid and Wan Daud, Wan Asma Awatif (2014) Roles of the influential parameters in the incineration process using centrality concept of graph theory. AIP Conference Proceedings, 1602 . pp. 233-239. ISSN 0094-243X

Mahmood, Nasrul Humaimi and Ahmmad, Siti Nor Zawani and Hashim, Hazrin and Abdull Rani, Siti Nurhidayah Naqiah (2012) Ovary ultrasound image edge detection analysis: a tutorial using MATLAB. International Journal of Engineering Research and Applications (IJERA), 2 (3). pp. 1635-1642. ISSN 2248-9622

Mahmood, Nasrul Humaimi and Omar, Camallil and Tjahjadi, Tardi (2012) Multiviews reconstruction for prosthetic design. International Arab Journal Of Information Technology, 9 (1). ISSN 1683-3198

Mahmud, M. and Waqar, M. and Mirza, A. A. and Abdullah, Abdul Halim (2012) Efficient securing of iris image template by using grayscale level incremented/decremented method. Proceedings Of The 9Th International Conference On Information Technology, Itng 2012 . pp. 635-639.

Mahmud, Maqsood and Khan, Khurram and Alghathbar, Khaled and Abdullah, A. H. B. (2012) Intrinsic authentication of multimedia objects using biometric data manipulation. International Arab Journal Of Information Technology, 9 (4). ISSN 1683-3198

Malekian, R. and Omar, R. and Han, Abdullah A. (2011) The impact of information and communication technologies on developing countries. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1066-1070. ISSN 1991-8178

Malekian, Reza and Abdullah, Abdul Hanan and Saeed, Rashid A. (2011) A cross-layer for resource reservation based on multi-protocol label switching over mobile IP version6. International Journal of Physical Sciences, 6 (11). pp. 2710-2717. ISSN 1992-1950

Mallahzadeh, H. and Wang, Ya Xing and Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Najafian, Gholamhossein (2014) Accurate estimation of the 100-year responses from the probability distribution of extreme surface elevations. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 4B .

Marghany, Maged and Hashim, Mazlan (2011) 3D tsunami wave reconstruction from Quickbird data by using fuzzy B-spline. International Journal of Physical Sciences, 6 (13). pp. 3111-3115. ISSN 1992-1950

Marghany, Maged and Hashim, Mazlan (2011) Comparison between mahalanobis classification and neural network for oil spill detection using RADARSAT-1 SAR data. International Journal of the Physical Sciences, 6 (3). pp. 566-576. ISSN 1992-1950

Marghany, Maged Mahmoud and Hashim, Mazlan (2010) Lineament mapping using multispectral remote sensing satellite data. Research Journal of Applied Sciences, 5 (2). 126 - 130. ISSN 1815-932X

Marghany, Maged Mahmoud and Hashim, Mazlan and Sabu, Zarina (2010) Mapping coastal geomorphology changes using synthetic aperture radar data. International Journal of the Physical Sciences, 5 (12). 1890 - 1896. ISSN 1992-1950

Marto, Aminaton and Nor, Aidil Rosly and Choy, Soon Tan and Kasim, Fauziah and Mohd. Yunus, Nor Zurairahetty and Moradi, Razieh (2016) Bearing capacity of soft clay installd with singular and group of encased bottom ash columns. Jurnal Teknologi, 78 (7-3). pp. 105-110. ISSN 2180-3722

Marto, Aminaton and Tan, Choy Soon (2016) Properties of coal bottom ash from power plants in Malaysia and its suitability as geotechnical engineering material. Jurnal Teknologi, 78 (8-5). pp. 1-10. ISSN 2180-3722

Maruti @ Ezani, Syaza Faiqah and Amerudin, Shahabuddin and Wan Kadir, Wan Hazli and Abdul Rahman, Muhammad Zulkarnain and Mohamed Yusof, Zainab and Ariffin, Azman and Tam, Tze Huey (2016) Hydrodynamic modelling of a proposed Lebir and Galas dam for flood hazard analysis. Malaysian Journal of Civil Engineering (MJCE), 28 (3). pp. 223-239. ISSN 1823-7843

Mat Su, Ahmad Shaharuddin and Abdul Ghani, Rasli and Slamet, Slamet (2014) Modelling and simulation of boost converter with maximum power point tracking (MPPT) for photovoltaic application. Jurnal Teknologi, 71 (5). pp. 1-4. ISSN 0127-9696

Matloob, Faris A. and Sulaiman, Ahmad Bashri (2014) The impact of spatial organization on locating the friday mosques in the traditional Islamic city-the old Mosul city as a case study. Jurnal Teknologi, 71 (1). pp. 85-94. ISSN 0127-9696

Mazlan, Saiful Amri and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Ahmad Mughni, Mohd. Jamalullail and Mohd. Yazid, Izyan Iryani (2014) Simulation study of magnetorheological testing cell design by incorporating all basic operating modes. Smart Structures and Systems, 14 (5). pp. 901-916. ISSN 1738-1584

Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Loosdrecht, Mark van and Ujang, Zaini and Chelliapan, Shreeshivadasan and Zambare, Vasudeo P. (2014) Utilization of palm oil mill effluent for polyhydroxyalkanoate production and nutrient removal using statistical design. International Journal of Environmental Science and Technology, 11 (3). pp. 671-684. ISSN 1735-1472

Md. Khudzari, Ahmad Zahran and Mohd. Yakub, Mohd. Fitri and Yasuchika, Mori (2014) Recent trends for practical rehabilitation robotics, current challenges and the future. International Journal of Rehabilitation Research, 37 (1). pp. 9-21. ISSN 0342-5282

Miskon, S. and Bandara, Wasana and Gable, Guy G. and Fielt, Erwin (2012) Success factors for ICT shared services in the higher education sector. Journal of Information Technology Research, 5 (3). pp. 1-24. ISSN 1938-7857

Mohamed, Norshidah and Abdul Karim, Nor Shahriza and Hussein, Ramlah (2012) Computer use ethics among university students and staffs: the influence of gender, religious work value and organizational level. Campus-Wide Information Systems, 29 (5). pp. 328-343. ISSN 1065-0741

Mohd. Ali, Nor Raihana and Pope, Jeff (2014) The influence of religiosity on taxpayers' compliance attitudes: empirical evidence from a mixed-methods study in Malaysia. Accounting Research Journal, 27 (1). pp. 71-91. ISSN 1030-9616

Mohd. Azmi, Nurulhuda Firdaus and Mohd. Sam, Suriani and Ismail, Saiful Adli and Amir Sjarif, Nilam Nur (2017) Adaptive user profiling: experimenting on multiple interests and changing interests. International Journal of Advances in Soft Computing and its Applications, 9 (1). pp. 99-110. ISSN 2074-8523

Mohd. Isa, Mohd Halimudin and Masrom, Maslin and Salim, Kamilah Radin (2014) Review of learning models for production based education training in technical education. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 206-211.

Mohd. Rahim, Mohd. Shafry and Abdullah, Norhaida and Amin, Ismail and Zakaria, Mohammad and Man, Mustafa and Othman, Nur Zuraifah Syazrah (2012) A new approach in measuring fish length using FileDI framework. International Arab Journal Of Information Technology, 9 (2). ISSN 1683-3198

Mohd. Yakub, Mohd. Fitri and Abu, Aminudin and Mori, Yasuchika (2017) Enhancing the yaw stability and the manoeuvrability of a heavy vehicle in difficult scenarios by an emergency threat avoidance manoeuvre. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231 (5). pp. 615-637. ISSN 0954-4070

Mohd. Yusof, Mohd. Rashid and Rashid, Mariyah and Mat, Ramli and Kusnin, Noorhafizah (2014) Effect of liquid inhibitor De-dio™ on dioxin-furan emission from medical waste incineration plant. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 47-51. ISSN 2180-3722

Mohd. Yusof, Mohd. Rashid and Yunus, Sattar and Mat, Ramli and Baharun, Sabariah and Lestari, Puji (2014) PM10 black carbon and ionic species concentration of urban atmosphere in Makassar of South Sulawesi province, Indonesia. Atmospheric Pollution Research, 5 (4). pp. 610-615. ISSN 1309-1042

Mohd. Yusof, Sha'ri and Harudin, Nolia (2014) Speeding maintenance performance through time study. Applied Mechanics and Materials, 607 . pp. 860-863. ISSN 1660-9336

Moneer, Ali Lilo and Abdul Latiff, Liza and Yousif, I. Almashhadany and Abu, Aminudin (2016) Identify and classify vibration signal for steam turbine based on neural sleep fuzzy system. Research Journal in Applied Sciences, Engineering and Technology, 12 (5). pp. 589-598. ISSN 2040-7459

Morad, Noor Azian and Aris, Nor Ilia Anisa and Md. Sarip, Mohd. Sharizan and Iwai, Yoshio (2014) Temperature effects on diffusion coefficient for 6-gingerol and 6-shogaol in subcritical water extraction. Journal of Physics: Conference Series, 495 . ISSN 1742-6588

Mubarak, N. M. and Kundu, A. and Sahu, J. N. and Chan Abdullah, Ezzat and Jayakumar, N. S. (2014) Synthesis of palm oil empty fruit bunch magnetic pyrolytic char impregnating with FeCl3 by microwave heating technique. Biomass and Bioenergy, 61 . pp. 265-275. ISSN 0961-9534

Mubarak, N. M. and Sahu, J. N. and Abdullah, Ezzat Chan and Jayakumar, Natesan Subramanian (2014) Removal of heavy metals from wastewater using carbon nanotubes. Separation and Purification Reviews, 43 (4). pp. 311-338. ISSN 1542-2119

Mubarak, N. M. and Thobashinni, Manimaran and Abdullah, Ezzat Chan and Sahu, Jn (2016) Comparative kinetic study of removal of pb2+ ions and cr3+ ions from wastewater using carbon nanotubes produced using microwave heating. Journal of Carbon Research, 2 (1). p. 7. ISSN 23115629

Mubarak, Nabisab Mujawar and Thines, Raj Kogiladas and Sajuni, Noor Rosyidah and Abdullah, Ezzat Chan and Sahu, Jaya Narayan and Ganesan, Poobalan and Jayakumar, Natesan Subramanian (2014) Adsorption of chromium (VI) on functionalized and non-functionalized carbon nanotubes. Korean Journal of Chemical Engineering, 31 (9). pp. 1582-1591. ISSN 0256-1115

Muhamad Rawai, Norshakila and Abedi, Mohammad and Fathi, Mohamad Syazli (2014) The effect of project and programme reference models in Architecture, Engineering and Construction (AEC) system development. Jurnal Teknologi, 70 (7). pp. 9-14. ISSN 0127-9696

Muhamad Yusoff, Muhamad Roslan and Songip, Ahmad Rahman and Baroto, Mas Bambang and Ariffin, Aini Suzana (2016) Catalysing growth through board members engagement in strategy execution. Studia Ubb Negotia, 61 (3). pp. 117-128.

Mujawar, Mubarak N. and Sahu, Jaya Narayan and Abdullah, Ezzat Chan and Ganesan, Poobalan (2014) Single stage production of carbon nanotubes using microwave technology. Diamond and Related Materials, 48 . pp. 52-59. ISSN 0925-9635

Nasongkhla, Sirima Tongsupa and Sintusingha, Sidh (2012) Conflicting green landscape ideologies in a TAI rural town in Thailand. International Journal of Urban and Regional Research, 36 (6). pp. 1146-1165. ISSN 0309-1317

Ngadi, Norzita and Alias, Hajar and Ishak, Siti Aktar (2012) Effects of feedstock and catalyst concentration on biodiesel production. Jurnal Teknologi, 57 . pp. 23-32. ISSN 0127-9696

Ngadi, Norzita and Nosri, Aisyah (2012) Photocatalytic oxidation of methyl orange dye over titania nanocatalyst. Jurnal Teknologi, 57 . pp. 33-40. ISSN 0127-9696; 2180-3722(online)

Nilashi, Mehrbakhsh and Bagherifard, Karamollah and Ibrahim, Othman and Janahmadi, Nasim and Panjalizadeh, Bahman and Barisami, Mousa (2012) Application of K-nearest neighbour predictor for classifying trust of B2C customers. Journal Of Theoretical And Applied Information Technology, 36 (1). pp. 18-25. ISSN 1992-8645

Nor, Maria Elena and Lee, Nor Muhammad Hisyam and Hossain, Suhartono and Sadaei, Javedani and Abd. Rahman, Nur Haizum and Kasiman, Nur Arina Bazilah (2012) Fuzzy time series and Sarima Model for forecasting tourist arrivals to Bali. Technology Journal, 57 (1). pp. 69-81. ISSN 0127-9696

Olabomi, Rasaq Adekunle and Jaafar, A. Bakar and Musa, Md. Nor and Sarip, Shamsul and Ariffin, Azrin (2017) Techno-economic analysis of innovative production and application of solar thermal chilled water for agricultural soil cooling. Renewable and Sustainable Energy Reviews, 73 . pp. 215-224. ISSN 1364-0321

Omar, M. Zakaria and Hashim, Aisha-Hassan Abdalla and Hassan, Wan Haslina and Othman, Omran Khalifa and Azram, Mohammad and Goudarzi, Shidrokh and Lalitha, Bhavani Jivanadham and Zareei, Mahdi (2017) State-aware re-configuration model for multi-radio wireless mesh networks. KSII Transactions on Internet and Information Systems, 11 (1). pp. 146-170. ISSN 1976-7277

Omar, Mohamed Hanafiah and Lim, Meng Hee (2014) Ambient energy harvesting for wireless sensor nodes: a review. Advanced Materials Research, 1025-1 . pp. 1093-1098. ISSN 1022-6680

Othman, Nooraini and Mohamad, Khairul Azmi (2014) Thinking skill education and transformational progress in Malaysia. International Education Studies, 7 (4). pp. 27-32. ISSN 1913-9020

Paiz Zamri, Mohd. Iza'an and Mohd. Khairuddin, Anis Salwa and Mokhtar, Norrima and Yusof, Rubiyah (2016) Wood species recognition system based on improved basic grey level aura matrix as feature extractor. Journal of Robotics Networking and Artificial Life, 3 (3). pp. 140-143. ISSN 2352-6386

Papargyropoulou, Effie and Lozano, Rodrigo and Steinberger, Julia K. and Wright, Nigel and Ujang, Zaini (2014) The food waste hierarchy as a framework for the management of food surplus and food waste. Journal of Cleaner Production, 76 . pp. 106-115. ISSN 0959-6526

Peng, Yen Liew and Wai, Lip Theo and Wan Alwi, Sharifah Rafidah and Jeng, Shiun Lim and Abd. Manan, Zainuddin and Klemes, Jiri Jaromir and Varbanov, Petar Sabev (2017) Total site heat integration planning and design for industrial, urban and renewable systems. Renewable and Sustainable Energy Reviews, 68 . pp. 964-985. ISSN 1364-0321

Pomsathit, Auttapon and Rakluea, Paitoon and Anantrasirichai, Noppin and Benjangkaprasert, Chawalit and Wakabayashi, Toshio (2014) The design of linear and circular polarization for dual band microstrip slot antenna. IEEJ Transactions on Electrical and Electronic Engineering, 9 (2). pp. 105-112. ISSN 1931-4973

Prawoto, Yun and Idris, Roslinda and Kamsah, Nazri and Tamin, Nasir (2011) Three-dimensional modeling to compute plastic zone in front of crack in compact tension sample of multiphase material. Computational Materials Science, 50 . pp. 1499-1503. ISSN 0927-0256

Prawoto, Yunan and Jasmawati, N. and Sumeru, Kasni (2012) Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel. Journal of Materials Science and Technology, 28 (5). pp. 461-466. ISSN 1005-0302

Rahmani, R. and Othman, Mohd. Fauzi and Khalid, Noor Khafifah (2012) Solving economic dispatch problem using particle swarm optimization by an evolutionary technique for initializing particles. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 526-536. ISSN 1992-8645

Rashid, Mariyah and Jamian, Nor Ruwaida and M. M., Syahirah and N., Huda (2014) Characteristics of particulate emission from a biomass fired boiler. 2nd International Conference on Agricultural and Food Engineering (CAFE 2014) - New Trends Forward, 2 . pp. 265-271. ISSN 2210-7843

Rohayah, C. A. and Shamsuddin, Shuhana and Sulaiman, Ahmad Bashri (2014) The contribution of historic urban spaces in influencing the character of George Town UNESCO world heritage site, Malaysia. WIT Transactions on Ecology and the Environment, 179 VO . pp. 1191-1199. ISSN 1743-3541

Rosip, N. I. Mad and Ahmad, S. and Arpawi, N. L. and Jamaludin, Khairur Rijal and Noor, F. Mat (2014) The effect of sintering temperature and composition for density and porosity of SS316L foam. Applied Mechanics and Materials, 465-46 . pp. 988-992. ISSN 1660-9336

Rusop, Mohamad and Mohd. Ghazali, Norizzawati and Yasui, Kanji and Hashim, Abdul Manaf (2014) Electrochemically deposited gallium oxide nanostructures on silicon substrates. Nanoscale Research Letters, 9 . ISSN 1556-276X

Sadat Zadeh, S.M.T. and Anwar, Toni and Basirat, M. (2012) A survey on application of artificial intelligence for bus arrival time prediction. Journal of Theoretical and Applied Information Technology, 46 (1). pp. 516-525. ISSN 1992-8645

Saed, Adil A. A. and Wan Kadir, Wan Mohd. Nasir and Hamza, Hentabli and Yousif, Adil (2012) An automated support for evaluating alternative design decisions. Journal Of Theoretical And Applied Information Technology, 36 (2). pp. 234-246. ISSN 1992-8645

Saffari, Seyed Ehsan and Adnan, Robiah and Greene, William (2012) Parameter estimation on hurdle poisson regression model with censored data. Jurnal Teknologi, 57 (1). pp. 189-198. ISSN 0127-9696

Salleh, Norsaremah and Hussein, Ramlah and Mohamed, Norshidah (2012) An empirical investigation on internet privacy on social network sites among Malaysian youths. Journal of Information Technology Research, 5 (3). pp. 85-97. ISSN 1938-7857

Sari, Emelia and Shaharoun, Awaluddin Mohamed and Ma'aram, Azanizawati (2014) Preliminary framework of sustainable maintenance performance measurement systems for automotive companies. Advanced Materials Research, 845 . pp. 590-595. ISSN 1022-6680

Sattar, Y. and Mohd. Yusof, Mohd. Rashid and Mat, Ramli and Baharun, Sabariah (2014) Black carbon and elemental concentration of ambient particulate matter in Makassar Indonesia. 8th International Symposium of the Digital Earth (ISDE8), 18 (1). ISSN 1755-1315

Seyed Fadzir, Syarifah Fazlin and Ibrahim, Suhaimi and Mahrin, Mohd. Naz'ri (2016) A systematic literature review on the limitations and future directions of the existing requirement prioritization techniques. Advanced Science Letters, 22 (10). pp. 3185-3190. ISSN 1936-6612

Shabanzadeh, Parvaneh and Yusof, Rubiyah and Shameli, Kamyar (2014) Artificial neural network for modeling the size of silver nanoparticles’ prepared in montmorillonite/starch bionanocomposites. Digest Journal of Nanomaterials and Biostructures, 9 (4). pp. 1699-1711. ISSN 1842-3582

Shahabi, H. and Ahmad, Baharin (2011) Application of MODIS image satellite and GIS technique in assessment of avalanche fall in roads. World Academy of Science, Engineering and Technology, 57 . pp. 786-790. ISSN 2010-376X

Shahijan, Milad Kalantari and Rezaei, Sajad and Preece, Christopher Nigel and Wan Ismail, Wan Khairuzzaman (2014) Examining retailers’ behaviour in managing critical points in Halal meat handling: a PLS analysis. Journal of Islamic Marketing, 5 (3). pp. 446-472. ISSN 1759-0833

Shahreki, Javad and Nakanishi, Hiroshi (2016) The relationship between task technology fit and individual performance: case study in hotel industry in Malaysia. Journal of Soft Computing and Decision Support Systems, 3 (6). pp. 1-15. ISSN 2289-8603

Shahri, Norsyarizan and Abdul Rahman, Roselainy and Hussain, Noor Hamizah (2014) Student approach to learning in programming courses among industrial mechatronics engineering technology students. International Conference on Teaching and Learning in Computing and Engineering . pp. 100-105. ISSN 2377-0309

Shahril, Rosdiana and Baharun, Sabariah and Islam, A. K. M. Muzahidul and Komaki, Shozo (2014) Anisotropic contrast diffusion enhancement using variance for wireless capsule endoscopy images. 2014 International Conference on Informatics, Electronics and Vision, ICIEV 2014 .

Shahrizal, Abd Shatar and Md. Salimun, Husni Alhan and Abu Hassan, Norihan and Ba Qutayan, Shadiya Mohamed Saleh (2016) Towards the sustainable development by 2020: Malaysia perspective on economic growth and wellbeing. American Journal of Trade and Policy (AJTP), 3 (2). pp. 1-10. ISSN 2313-4755

Shaikh Salim, Sheikh Ahmad Zaki and Hagishima, Aya and Tanimoto, Jun and Mohammad, Ahmad Faiz and Abd. Razak, Azli (2014) Estimation of aerodynamic parameters of urban building arrays using wind tunnel measurements. Journal of Engineering Science and Technology, 9 (2). pp. 176-190. ISSN 1823-4690

Shamsuddin, Shuhana and Zaini, Khazainun (2014) The influence of the surveillance factors towards the residents' perceptions on safety at the shared outdoor spaces in gated community. Advanced Materials Research, 838-84 . pp. 2942-2947. ISSN 1022-6680

Sarip, Shamsul and Wan Hassan, Mat Nawi (2014) Meramal aliran udara dan keselesaan di dalam masjid Sultan Salahuddin Abdul Aziz Shah menggunakan simulasi komputer. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 39-46. ISSN 2180-3722

Shareef, Hussain and Mohamed, Azah and Abd. Khalid, Mohamed Saifunizam and Mustafa, Mohd. Wazir (2012) A method for real power transfer allocation using multivariable regression analysis. Journal Of Central South University Of Technology, 19 (1). pp. 179-186. ISSN 1005-9784

Ilangovan, Sheila and Sarmin, Nor Haniza (2012) Conjugacy class sizes for some 2-groups of nilpotency class two. Jurnal Teknologi, 1 (57). pp. 25-33. ISSN 0127-9696

Shirakashi, Masataka and Yamada, Shuichi and Kawada, Yoshitaka and Hirochi, Takero (2014) Blocking of snow/water slurry flow in pipeline caused by compression-strengthening of snow column. Sustainability, 6 (2). pp. 530-544. ISSN 2071-1050

Slamet, Slamet and Abdul Ghani, Rasli and Kobayashi, Fuminori (2014) Implementation of IncCond algorithm to optimize PI boost converter for maximum power point tracking in photovoltaic arrays. Jurnal Teknologi, 71 (5). pp. 21-24. ISSN 0127-9696

Suhot, Mohamed Azlan and Chambers, A. R. (2014) The effects of voids on the flexural properties and failure mechanisms of carbon/epoxy composites. Jurnal Teknologi, 71 (2). pp. 151-157. ISSN 0127-9696

Supriyanto, Eko and Meng Kuan, Tan and Kee Jiar, Yeo (2010) Language assessment and training support system (LATSS) for Down syndrome children under 6 years old. WSEAS Transactions on Information Science and Applications, 7 (8). 1058 - 1067. ISSN 1790-0832

Supriyanto, Eko and Wan M. Hafizah, Wan M. Hafizah and Tahir, Nurul A. and Arooj, Adeela and Syed M. Nooh, Syed M. Nooh (2012) New technique towards operator independent kidney ultrasound scanning. International Journal of Computers, 6 (1). pp. 73-82. ISSN 1998-4308

Suraja, P. V. and Yaakob, Zahira and Binitha, Narayanan N. and Triwahyono, Sugeng and Silija, P. P. (2012) CO 3O 4 doped over SBA 15: excellent adsorbent materials for the removal of methyleneblue dye pollutant. Clean Technologies and Environmental Policy . pp. 1-9. ISSN 1618-954X

Syed Abdullah, Norris and Sadiq, Shazia and Indulska, Marta (2012) A compliance management ontology: developing shared understanding through models. 24th International Conference on Advanced Information Systems Engineering, CAISE, 7328 . pp. 429-444. ISSN 0302-9743

Takahashi, Kenji and Kamimura, Naofumi and Hishiyama, Shojiro and Hara, Hirofumi and Kasai, Daisuke and Katayama, Yoshihiro and Fukuda, Masao and Kajita, Shinya and Masai, Eiji (2014) Characterization of the catabolic pathway for a phenylcoumaran-type lignin-derived biaryl in Sphingobium sp strain SYK-6. Biodegradation, 25 (5). pp. 735-745. ISSN 0923-9820

Talib, Muhamad Farihin and Nor Azli, Nor Hayati and Othman, Mohd. Fauzi (2016) Classification of machine fault using principle component analysis, general regression neural network and probabilistic neural network. Journal of Telecommunication, Electronic & Computer Engineering, 8 (11). pp. 93-98. ISSN 2180-1843

Tamura, Masayuki and Tsuji, Yukiko and Kusunose, Tatsuya and Kamimura, Naofumi and Okazawa, Atsushi and Mori, Tetsuya and Nakabayashi, Ryo and Hishiyama, Shojiro and Fukuhara, Yuki and Hara, Hirofumi and Sato-Izawa, Kanna and Muranaka, Toshiya and Saito, Kazuki and Katayama, Yoshihiro and Fukuda, Masao and Masai, Eiji and Kajita, Shinya (2014) Successful expression of a novel bacterial gene for pinoresinol reductase and its effect on lignan biosynthesis in transgenic arabidopsis thaliana. Applied Microbiology and Biotechnology, 98 (19). pp. 8165-8177. ISSN 0175-7598

Tan, Liat Choon and Hussin, Khadijah (2012) Issues on 3D property. International Journal of Scientific And Engineering Research, 3 (2). pp. 17-22. ISSN 2229-5518

Tan, Lit Ken and Ahmad, Tahir and Lee, Kee Quen and Gan, Yee Sian and Tey, Wah Yen and Wong, Wai Kit (2017) Topological basis of flat electroencephalography's state space. Asian Journal of Engineering and Technology, 5 (2). pp. 62-70. ISSN 2321-2462

Teo, Ming Ting and El-Sayed Nasef, Mohamed Mahmoud and Sithambaranathan, Paveswari (2017) Kinetic investigations of emulsion-and solvent-mediated radiation induced graft copolymerization of glycidyl methacrylate onto nylon-6 fibres. Journal of Radioanalytical and Nuclear Chemistry, 311 (1). pp. 843-857. ISSN 0236-5731

Timothy, G. Walmsley and Martin, J. Atkins and Amir, H. Tarighaleslami and Liew, Peng Yen (2016) Assisted heat transfer and shaft work targets for increased total site heat integration. Chemical Engineering Transactions, 52 . pp. 403-408. ISSN 2283-9216

Udin, Wani Sofia and Ahmad, Anuar (2012) The potential use of rotor wing unmanned aerial vehicle for large scale stream mapping. International Journal of Scientific & Engineering Research, 3 (12). pp. 1-6. ISSN 2229-5518

Vejayon, Jayaseelan and Narayana Samy, Ganthan and Maarop, Nurazean and Megat Mohd Zainuddin, Norziha and Shanmugam, Bharanidharan and Magalingam, Pritheega (2016) Adopting factors of bring your own device (BYOD) at the selected private higher learning institution in Malaysia. Journal of Advanced Research in Social and Behavioural Sciences, 2 (1). pp. 24-32. ISSN 2462-1951

Vongsack, Souphanna and Phongcharoenpanich, Chuwong and Kosulvit, Sompol and Hamamoto, Kazuhiko and Wakabayashi, Toshio (2014) Rectangular ring antenna excited by circular disc monopole for Wimax system. International Journal of Antennas and Propagation . ISSN 1687-5869

Wan Ismail, Wan Khairuzzaman and Hong, Paul Kit Chan and Buhari, Nora and Muzaini, Azlina (2012) Acceptance of smart phone in enhancing patient-caregivers relationship. Journal of Technology Management and Innovation, 7 (3). pp. 71-79. ISSN 0718-2724

Watanabe, Kazunori and Miyagi, Zenichi and Dolah, Rozzeta and Takahashi, K. (2014) Optimization of the paper permeability tester using Robust design. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 91-96. ISSN 0127-9696

Wee, L. K. and Chai, H. Y. and Supriyanto, Eko (2011) Computerized nuchal translucency three dimensional reconstruction, visualization and measurement for trisomy 21 prenatal early assessment. International Journal of Physical Sciences, 6 (19). pp. 4640-4648. ISSN 1992-1950

Yahya, Wira Jazair and Mohd. Norhisyam, Mohd. Norhisyam (2012) Utilization of waste cooking oil as diesel fuel and improvement in combustion and emission. Journal of Mechanics Engineering and Automation (JMEA), 2 . pp. 267-270. ISSN 2159-5275

Yahya, Wira Jazair and Tan, Wee Choon and Samion, Syahrullail and Hirofumi, Noge and Said, Mazlan and Mohd. Nor, Alias (2012) Utilization of waste hydraulic oil as fuel in diesel engine. Journal Advanced Materials Research, 518-23 . pp. 3263-3266. ISSN 1022-6680

Yazdani, K. and Rashvanlouei, K. Y. and Ismail, K. (2011) Ranking of technology transfer barriers in developing countries; case study of iran's biotechnology industry. IEEE International Conference on Industrial Engineering and Engineering Management . pp. 1602-1606. ISSN 2157-3611

You, Kok Yeow and Abbas, Zulkifly and Abdul Malek, Mohd. Fareq and Cheng, Ee Meng and Mun, Hou Kit (2012) Modeling of dielectric relaxation for lossy materials at microwave frequencies using polynomial approaches. Jurnal Teknologi, 58 . pp. 51-65. ISSN 0127-9696

Yousefi, Amin Termeh and Bagheri, Samira and Shinji, Kawasaki and Rouhi, Jalal and Mahmood, Mohamad Rusop and Ikeda, Shoichiro (2014) Fast synthesis of multilayer carbon nanotubes from camphor oil as an energy storage material. Biomed Research International . ISSN 2314-6133

Yousefi, Amin Termeh and Shoichiro, Ikeda and Mahmood, Mohamad Rusop and Yousefi, Haleh Termeh (2014) Simulation of nano sensor based on carbon nanostructures in order to form multifunctional delivery platforms. Nanoscience, Nanotechnology and Nanoengineering, 832 . pp. 778-782. ISSN 1022-6680

Yui, Kazuko and Itsukaichi, Yasuhiro and Kobayashi, Takuro and Tsuji, Tomoya and Fukui, Keisuke and Maeda, Kouji and Kuramochi, Hidetoshi (2017) Solid-liquid equilibria in the binary systems of saturated fatty acids or triglycerides (C12 to C18) + hexadecane. Journal of Chemical and Engineering Data, 62 (1). pp. 35-43. ISSN 0021-9568

Zainal, Nurbaya and Mahmood, Mohamad Rusop (2014) Effect of addition Pb content on lead titanate thin films for MIM capacitor. IOP Conference Series: Materials Science and Engineering, 58 (1). ISSN 1757-8981

Zainal, Nurbaya and Zulkefle, Habibah and Mahmood, Mohamad Rusop (2014) Thickness dependency on dielectric property of lead titanate thin film. Nanoscience, Nanotechnology and Nanoengineering, 832 . pp. 384-387. ISSN 1022-6680

Zak, Ali Khorsand and Hashim, Abdul Manaf and Darroudi, Majid (2014) Optical properties of ZnO/BaCO3 nanocomposites in UV and visible regions. Nanoscale Research Letters, 9 . ISSN 1556-276X

Zakaria, Noor Azura and Ibrahim, Suhaimi and Mahrin, Mohd Naz'ri (2016) An integrated approach to formulate a value-based software process tailoring framework. Jurnal Teknologi, 78 (12-3). pp. 171-180. ISSN 0127-9696

Zamani, Hadi and Mohd. Abas, Amalina and Mohammed Amin, Muhamad Kamal (2016) Eye tracking application on emotion analysis for marketing strategy. Journal of Telecommunication Electronic and Computer Engineering, 8 (11). pp. 87-91. ISSN 2180-1843

Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Mazlan, Saiful Amri and Derawi, Dafizal and Salim, Nurul Dayana (2014) Robust attitude controller for uncertain hexarotor micro aerial vehicles (MAVs). IEEE International Conference on Intelligent Robots and Systems . pp. 4776-4781. ISSN 2153-0858

Zamzuri, Hairi and Mazlan, Saiful Amri and Low, Chan Yee (2014) Simple robust road lane detection algorithm. 2014 5th International Conference on Intelligent and Advanced Systems: Technological Convergence for Sustainable Future, ICIAS 2014 - Proceedings .

Zamzuri, Hairi and Mazlan, Saiful Amri and Zulkarnain, Noraishikin (2014) Ride and handling analysis for an active anti-roll bar: case study on composite nonlinear control strategy. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 2122-2143. ISSN 2229-8649

Zareei, Mahdi and A. K. M., Muzahidul Islam and Mansoor, Nafees and Baharun, Sabariah and Ehab, Mahmoud Mohamed and Sampei, Seiichi (2016) CMCS: a cross-layer mobility-aware mac protocol for cognitive radio sensor networks. EURASIP Journal On Wireless Communications And Networking, 2016 (1). p. 160. ISSN 1687-1499

Zuikafly, Siti Nur Fatin and Anas, Abdul Latiff and Sulaiman, Wadi Harun and Ibrahim, Mohd. Haniff and Ahmad, Fauzan (2016) Dual-wavelength passively Q-switched erbium-doped fiber laser with MWCNTs slurry as a saturable absorber. Photonics Letters of Poland, 8 (4). pp. 98-100. ISSN 2080-2242

Zulkarnain, Noraishikin and Zamzuri, Hairi and Mazlan, Saiful Amri (2014) Combined CNF with LQR in improving ride and handling for ground vehicle. Applied Mechanics and Materials, 575 . pp. 749-752. ISSN 1660-9336

Zulkarnain, Noraishikin and Zamzuri, Hairi and Md. Sam, Yahaya and Mazlan, Saiful Amri and Zainal, Sheikh Muhammad Hafiz Fahamii (2014) Improving vehicle ride and handling using LQG CNF fusion control strategy for an active antiroll bar system. Abstract and Applied Analysis, 2014 . ISSN 1085-3375

Book Section

Ahmad, Robiah and Mohd. Samsuri, Saiful Farhan and Zakaria, Mohd. Zakimi (2012) Evapotranspiration prediction using system identification and genetic algorithm. In: Proceedings of the 2nd IASTED Asian Conference on Modelling, Identification, and Control, AsiaMIC 2012. ACTA Press, Calgary, Canada, pp. 176-183. ISBN 978-088986911-0

Al Shamsi, S. A. and Ahmad, Anuar and Desa, Ghazali (2011) Development of critical successful factors model for spatial data infrastructure implementation. In: Proceedings - 2011 IEEE 7th International Colloquium on Signal Processing and Its Applications, CSPA 2011. IEEE Explorer, 212 -219. ISBN 978-161284414-5

Ali, Hassan Osman and Abd. Rahman, Azizah and Hassan, Ismail Bile and Mohamed Ali, Ismail (2011) Assessing and certifying research service-learning context to achieve ICT goals. In: Innovation in Information Systems: Series 2. Penerbit UTM Press, Skudai, Johor, pp. 107-120. ISBN 978-983-52-0813-3

Babaeizadeh, Mahnoush and Maarof, Mohd. Aizaini and Bakhtiari, Majid (2016) Survey on method of encryption in cloud computing. In: Security in Computer & Networking Part ii. Penerbit UTM, pp. 107-129. ISBN 978-983-52-1151-5

Gatavi, E. and Husain, Abdul Rashid and Shirdel, A. H. and Ahmad, M. N. (2011) On the design of output feedback sliding mode control for a class of uncertain system. In: 4th International Conference on Modeling, Simulation and Applied Optimization. IEEE XPLORE, , 001-004. ISBN 978-1-4577-0003-3

Habil, Hadina (2010) Functions and strategies of email communication at the workplace. In: Handbook of Research on Discourse Behavior and Digital Communication: Language Structures and Social Interaction. IGI Global, USA, pp. 479-489. ISBN 978-161-520-774-9

Hasan, Mohamed Noor (2010) E-Pembelajaran @ UTM. In: E-Pembelajaran di IPTA Malaysia. Pusat Pembangunan Akademik Malaysia & Jabatan Pengajian Tinggi, Kementerian Pengajian Tinggi, Kuala Lumpur, pp. 129-148. ISBN 978-967-5878-21-3

Hashim, Mazlan and Marghany, Maged and Mahmud, Mohd. Rizaludin and Anuar, Mohd. Hafiz (2010) Utilization of LiDAR and IKONOS satellite data for security hotspot analysis based on realism of 3D city model. In: Computational Science and Its Applications – ICCSA 2010: International Conference, Fukuoka, Japan, March 23-26, 2010, Proceedings, Part I. Lecture Notes in Computer Science . Springer Berlin Heidelberg, Germany, pp. 331-345. ISBN 978-3-642-12155-5

Herman, Herman and Abd. Rahman, Azizah and Syahbana, Y. A. and Bakar, K. A. (2011) Nonlinearity modelling of QoE for video streaming service over wireless and mobile network. In: 2011 Second International Conference on Intelligent Systems, Modelling and Simulation (ISMS). IEEE Xplore, Red Hook, N. Y., pp. 313-317. ISBN 978-1-4244-9809-3

Idroas, Mariani and Mohd. Suhaimy, Suhanna Natalya and Ibrahim, M. Nasir (2010) Imaging of particle shape using optical tomography. In: Progress in Process Tomography & Instrumentation System Series 2. Pusat Pengurusan Penyelidikan (RMC) & Penerbit UTM Press, UTM, pp. 43-56. ISBN 978-967-354-179-9

Lashkari, Habibi and Abdul Manaf, Azizah and Masrom, Maslin and Mohd. Daud, Salwani (2011) A survey on image steganography algorithms and evaluation. In: Communications in Computer and Information Science. Springer Berlin Heidelberg, pp. 406-418. ISBN 978-364222388-4

Marghany, Maged Mahmoud and Hashim, Mazlan (2011) Comparative algorithms for oil spill detection from multi mode RADARSAT-1 SAR satellite data. In: Computational Science and Its Applications - ICCSA 2011: International Conference, Santander, Spain, June 20-23, 2011. Proceedings, Part II. Lecture Notes in Computer Science, 2 . Springer Berlin Heidelberg, London, pp. 318-329. ISBN 978-364221886-6

Mariani Idroas, Mariani and R.G., Green and Ibrahim, Muhammad Nasir (2010) Optical tomography system based on charges-coupled device linear image sensors. In: Progress in Process Tomography & Instrumentation System Series 1. Pusat Pengurusan Penyelidikan (RMC), UTM, pp. 133-150. ISBN 978-967-354-178-2

Musliman, Ivin Amri and Alizadehashrafi, Behnam and Chen, Tet-Khuan and Abdul Rahman, Alias (2010) Modeling visibility through visual landmarks in 3D navigation using geo-DBMS. In: Lecture Notes in Geoinformation and Cartography. Lecture Notes in Geoinformation and Cartography . Springer-Verlag Berlin Heidelberg, London, pp. 157-180. ISBN 978-3-642-04790-9

Ochsner, Andreas (2011) Special numerical techniques to joint design. In: Handbook of Adhesion Technology. Springer, New York, pp. 661-668. ISBN 978-3-642-01168-9

Sardadi, Maruto Masserie and Daman, Daut and Mohd. Rahim, Mohd. Shafry and Jupri, Zahabidin (2010) QuadR-tree indexing selection engine for tuning spatial database system using mobile geographical information system technology. In: New Advanced Technologies. In-Tech, Croatia, 267 - 274. ISBN 978-953-307-067-4

Shah, M. F. N. and Zainal, M. A. and Faruq, A. and Abdullah, Shahrum Shah (2011) Metamodeling approach for PID controller optimization in an evaporator process. In: 2011 Fourth International Conference on Modeling, Simulation and Applied Optimization. IEEE, New Jersey, 001-004. ISBN 978-145770005-7

Tahar, K. N. and Ahmad, Anuar (2011) Capability of low cost digital camera for production of orthophoto and volume determination. In: Proceedings - 2011 IEEE 7th International Colloquium on Signal Processing and Its Applications, CSPA 2011. IEEE Explorer, 67 -71. ISBN 978-161284414-5

Udin, W. S. and Ahmad, Anuar (2011) Calibration of high resolution digital camera using self-calibration bundle adjustment method. In: Proceedings - 2011 IEEE 7th International Colloquium on Signal Processing and Its Applications, CSPA 2011. IEEE Explorer, 137 -141. ISBN 978-161284414-5

Zainon, Othman and Wan, A. W. A. and Ahmad, Anuar (2011) Evaluating the performance of GPS survey methods for landslide monitoring at hillside residential area: Static vs rapid static. In: Proceedings - 2011 IEEE 7th International Colloquium on Signal Processing and Its Applications, CSPA 2011. IEEE Explorer, USA, pp. 453-459. ISBN 978-161284414-5

Conference or Workshop Item

Shamsuddin, Shuhana and Hussin, Natasha Azim (2013) Implementation of crime prevention through environmental design by Kuala Lumpur City Hall. In: 3rd International Conference on Civil Engineering, Architecture and Building Materials (CEABM 2013), MAY 24-26, 2013, Jinan, PEOPLES R CHINA.

Abd. Rahim, Siti Hajar and Mohd. Rashid, Mohd. Yusof and Andenan, Nurnadia and Mohd. Rashid, Ammar (2016) The effects of newly formulated filter aids material loading on pressure drop and particle penetration. In: International Conference on Mechanics, Materials and Structural Engineering (ICMMSE 2016), 2016, South Korea.

Abdul Hamid, Nurul Farhah and Ahmad, Anuar (2013) Calibration of high resolution digital camera based on different photogrammetric methods. In: 8th International Symposium on digital Earth .

Abdul Malik, Adi Maimun and Koto, J. and Rashidi, M. (2013) Tracking of ships navigation in the Strait of Malacca using automatic identification system. In: IMAM 2013, 2013.

Abdul Raman, Norazmein (2013) Modeling of cutting force and chip formation when edge-milling medium density fiberboard. In: Conference on forestry and forest products research 2013 "Forestry R, D & C: Meeting National and Global Needs", 2013.

Abdulhussean, Sanaa Abdulkarim (2013) The usage of virtual reality technologies in the provision of sophisticated industrial information technology. In: The 6th Arab International Conference on Information Technology, 2013.

Abdullah, Nurul Hidayah and Shameli, Kamyar (2016) Rapid removal of copper from aqueous solution by magnetite zeolite nanocomposite as adsorbent. In: Malaysia-Japan Joint International Conference (MJJIC2016), 06-07 Sep, 2016, Kuala Lumpur, Malaysia.

Adeyemi, Ikuesan Richard and Abd. Razak, Shukor and Zainal, Anazida and Nor Azhan, Nor Amira (2013) A digital forensic investigation model for insider misuse. In: 3rd International Conference on Computational Science, Engineering and Information Technology, CCSEIT 2013, 7 June 2013 through 9 June 2013, Konya; Turkey.

Ahmad, Anuar and Tahar, Khairul Nizam and Udin, Wani Sofia and Hashim, Khairil Afendy and Darwin, Norhadija and Mohd. Room, Mohd. Hafis and Abdul Hamid, Nurul Farhah and Mohd. Azhar, Noor Aniqah and Azmi, Shahrul Mardhiah (2013) Digital aerial imagery of unmanned aerial vehicle for various applications. In: IEEE International Conference on Systems, Control System, Computing & Engineering, 2013, 2013.

Ahmad, Anuar (2013) Digital elevation model and orthophoto production of coastal area for erosion monitoring using close range photogrammetry approach. In: Seminar on Advance Active Remote Sensing, 2013, 2013.

Ahmad, Anuar (2013) UAV based multi rotor for environmental survey based on simulation model using calibrated high resolution digital camera. In: 12th international Symposium on Geoinformation & Exhibition, 2013, 2013.

Ahmad, Anuar (2013) Unmanned aerial vehicle technology for river bed mapping. In: 12th international UMT Annual Symposium, 2013, 2013.

Ahmad, Arshad (2013) Modeling of ultrasonic assisted reboiler system. In: 2nd Conference on Emerging Energy & Process Technology 2013 (CONCEPT 2013), 9-10 Dec 2013, 2013, Desaru, Johor Bahru.

Ahmad, Baharin (2013) Application of quickbird and Unmanned Aerial Vehicle (UAV) for updating topographic map: a review. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013).

Ahmad, Muhammad 'Aasim Asyafi'ie and Harun, Mokhtar and Khalid, Puspa Inayat and Shapiai@Abd.Razak, Mohd. Ibrahim and Ibrahim, Md. Najib and Abdul Hamid, Siti Zaleha (2016) Comparison of the themes of Malaysian Friday sermons between the year 2010 and 2015. In: 2016 International Conference on Electrical, Electronic, Communication & Control Engineering, 2016, Skudai, Johor.

Ahmad Rosli, Shahrizal and Songip, Ahmad Rahman (2016) E-procurement and supply chain performance in TM Berhad. In: Proceedings International Conference on Innovation and Management, Malaysia 2016, 2016, Kuala Lumpur, Malaysia.

Ali, Noor Azman and Mahat, Fauziah and Md. Yunus, Mohd. Yuzairin (2013) Total quality preventive management module and system development in engineering maintenance. In: Second International Conference on Engineering Business Management 2013, 2013.

Alizadehashrafi, Behnam (2013) Towards Malaysian three-dimensional spatial data infrastructure. In: International Symposium and Exhibition on Geoinformation (ISG 2013), 2013.

Ariff, M. H. M. and Zamzuri, H. and Ldris, N. K. N. and Mazlan, S. A. (2013) Antilock braking system slip control modeling revisited. In: Applied Mechanics And Materials.

Asli, Umi Aisah and Sadikin, Aziatul Niza and Md. Kasmani, Rafiziana and Rasit Ali, Roshafima (2016) Impak program mobiliti terhadap pembangunan diri mahasiswa. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan (NASDEC 2016), 28-30 Nov, 2016, Johor Bahru, Malaysia.

Awang, Norkhushaini and Selamat, Harihodin and Shariff, Sya Azmeela (2016) Preliminary study on ISMS ISO 27001:2013 implementation to government agencies in Malaysia. In: Postgraduate Annual Research on Informatics Seminar (PARIS 2016), 2016, Kuala Lumpur, Malaysia.

Awang, Ramli (2013) Sains dan teknologi: wacana histriografi dalam gagasan humanisasi dan Islamisasi. In: Seminar on Islam, Science & Technology 2013, 2013.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Catalytic combustion of waste palm trunk derived biochar and biomass. In: Applied Mechanics And Materials.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Catalytic steam gasification of waste palm tree trunk derived bio-char. In: Applied Mechanics And Materials.

Azizi, N. and Kim, Y. K. and Miyawaki, J. and Mochida, I. and Yoon, S. H. (2013) Low temperature catalytic steam gasification of waste palm trunk by pottasium carbonate supported on perovskite oxide. In: Advanced Materials Research.

Badarudin, Ahmad Ezainuddin and Kamarudin, Suzilawati and Mohammad, Ali Tareq and Mohammed, Hasnoni (2016) Balanced scorecard kills innovation at hospitals: a literature review. In: Proceedings of The 13th International Conference on Innovation & Management, 28-30 Nov, 2016, Wuhan, China.

Boguslawski, Pawel and M. Gold, Christopher and Abdul Rahman, Alias (2012) CAD construction method of 3D building models for GIS analysis. In: XXII ISPRS Congress, 25 Aug – 1 Sept 2012, Melbourne, Australia.

Bukhori, Iksan and Ismail, Zool Hilmi (2016) Detection strategy for kidnapped robot problem in Monte Carlo localization based on similarity measure of environment. In: 2016 IEEE 6TH International Conference on Underwater System Technology: Theory and Applications, 13-14 Dec, 2016, Pulau Pinang, Malaysia.

Chan, Meng Shen and Shariff, Sya Azmeela (2016) Apply UTAUT model for understanding the teacher perceptions using frog VLE. In: POSTGRADUATE ANNUAL RESEARCH ON INFORMATICS SEMINAR (PARIS 2016), 2016, Kuala Lumpur, Malaysia.

Eka Putranti, Vina Wahyuni and Ismail, Zool Hilmi and Namerikawa, Toru (2016) Robust-formation control of multi-autonomous underwater vehicles based on consensus algorithm. In: IEEE Conference on Control Applications (CCA) 2016, 2016, Argentina.

Fallah, A. and Kordestani, D. and Alizadeh, A. and Endud, S. (2013) Supported palladium catalysis using a biguanide n-donor motif on mesoporous silica for suzuki-miyaura coupling reaction. In: Advanced Materials Research.

Farrah Diana, Farrah Diana and Saiful Bahry, Saiful Bahry and Masrom, Maslin and Masrek, Mohamad Noorman (2016) Website credibility and user engagement: a theoretical integration. In: 4th International Conference on User Science and Engineering, 23-25 Aug, 2016, Melaka, Malaysia.

Fathi, Mohamad Syazli and Zakiyudin, Mohd. Zulakhmar and Rambat, Shuib and Mohd. Tobi, Siti Uzairiah and Rajab, Nor A'ini and Abdul, Karim Mirasa and Md. Daud, Mohd. Yusof (2016) Building maintenance management in Malaysian institutions of higher education, the context-specific application for information delivery system. In: 8th International Real Estate Research Symposium (IRERS 2016), 26-28 Apr, 2016, Kuala Lumpur, Malaysia.

Fili, Alireza and Songip, Ahmad Rahman (2016) Innovation management in oil tanker vessels safety. In: Proceedings ICIM 2016 Malaysia, 28-30 Nov, 2016, Kuala Lumpur, Malaysia.

Fukuda, Kanao and Sugimura, Joichi (2014) The influences of a hydrogen environment on the tribological properties of pure metals. In: 5th World Tribology Congress, WTC 2013, 8-13 Sept, 2013, Italy.

Gode, Ameya and Razak, Khamarrul Azahari (2013) Characterization of forest canopy gaps caused by landslides using high density airborne laser scanning. In: International Symposium & Exhibition on Geoinformation (ISG 2013), 24-25 September 2013, Universiti Teknologi Malaysia Kuala Lumpur, Malaysia.

Ibrahim, Mohd. Faisal and Adnan, Rosanita and Yahya, Saadiah and Taib, Mohd. Nasir and Kamardin, Kamilia (2016) Video adaptation algorithm for mobile learning environment. In: The International Conference on Information Systems and Technology (ICIST 2016), 2016, Kota Kinabalu, Malaysia.

Islam, A. K. M. Muzahidul and Baharun, Sabariah and Wada, Koichi (2012) An overview on dynamic wireless sensor network architectures. In: 2012 International Conference on Informatics, Electronics & Vision (ICIEV), 18-19 May 2012, Dhaka, Bangladesh.

Jalil, Mohd. Ezwan and A. Rahim, Mohamad Kamal and Samsuri, Noor Asmawati and Dewan @ Abdul Rahman, Raimi and Kamardin, Kamilia (2016) Flexible ultra-wideband antenna with incorporated metamaterial structures- multiple notches for data encoding of chipless RFID application. In: The 7th International Conference on Metamaterials, Photonic Crystals and Plasmonics, 2016, Spain.

Jaw, S. W. and Hashim, Mazlan (2013) Urban underground pipelines mapping using ground penetrating radar. In: 8th International Symposium on Digital Earth, 2013.

Kang, Hooi Siang and Tang, Howe Hing and Lee, Kee Quen and Steven, Adelina and Yu, Xiaochuan (2017) Prediction on parametric resonance of offshore crane cable for lowering subsea structures. In: IEEE International Conference on Underwater System Technology: Theory and Applications (USYS) 2016, 2016, Penang, Malaysia.

Khairuddin, Nurul Atasha and Kamardin, Kamilia (2016) Model of sentiment analysis for social media data. In: Postgraduate Annual Research on Informatics Seminar (PARIS 2016), 26-27 Oct 2016, Kuala Lumpur, Malaysia.

Khalid, C.M.L. and Mohamed, Z. and Fathi, M. S. and Zakiyudin, M. Z. and Muhamad Rawai, N. and Abedi, M. (2013) The potential of augmented reality technology for pre-construction. In: Applied Mechanics And Materials.

Lee, Kee Quen and Abu, Aminuddin and Muhamad, Pauziah and Kato, Naomi and Sahekhaini, Asnizah and Abdullah, Hanida (2014) The effectiveness of two-versus three-start helical strakes in suppressing VIV of flexible cylinder. In: Offshore Technology Conference Asia: Meeting the Challenges for Asia's Growth, OTC ASIA 2014, 25-28 Mac, 2014, Kuala Lumpur, Malaysia.

Lee, Kee Quen and Abu, Aminudin and Muhamad, Pauziah and Sahekhaini, Asnizah and Tan, Lit Ken and Kang, Hooi Siang (2017) Prediction of vortex-induced vibration of bare cylinder and cylinder fitted with helical strakes. In: The 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), 2016, China.

Lee, Kee Quen and Tang, Howe Hing and Hooi, Siang Kang and Gang, Ma (2017) Neural-network prediction of riser top tension for vortex induced vibration suppression. In: IEEE International Conference on Underwater System Technology: Theory and Applications (USYS), 2016, Penang, Malaysia.

Lim, Meng Hee and Leong, M. S. and Keng, N. W. (2013) Vibration analysis of rub in rotating machinery. In: Applied Mechanics And Materials.

Ling, F. N. L. and Kassim, K. A. and Abdul Karim, A. T. (2013) Reaction products of lime zeolite stabilized kaolin humic acid. In: Applied Mechanics And Materials.

Ling, F. N. L. and Kassim, K. A. and Abdul Karim, A. T. and Chan, T. W. (2013) Stabilization of artificial organic soil at room temperature using blended lime zeolite. In: Advanced Materials Research.

Ling, F. N. L. and Kassim, K. A. and Karim, A. T. A. and Tiong, K. and Tan, C. K. (2013) Geochemistry properties of southern Malaysian organic soil. In: Applied Mechanics And Materials.

Mad Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Syed Abdul Hamid, Syed Hassan and Zakuan, Norhayati (2013) Exploratory analysis of ergonomics importance at workplace and safety culture amongst occupational safety and health practitioners. In: IAENG Transactions on Engineering Technologies.

Mahzan, M. I. and Muhamad, S. and Abdul Aziz, S. and Mat Ali, M. S. (2013) Composite wing flutter speed and frequency due to variable control surface deflection in low speed wind tunnel. In: Applied Mechanics And Materials.

Maizir, H. and Kassim, Khairul Anuar (2013) Neural network application in prediction of axial bearing capacity of driven piles. In: Lecture Notes In Engineering And Computer Science.

Mansoor, Nafees and Muzahidul Islam, A. K. M. and Zareei, Mahdi and Baharun, Sabariah and Komaki, Shozo (2016) A novel on-demand routing protocol for cluster-based cognitive radio ad-hoc networkaware cognitive radio based hospital. In: IEEE Region 10 Conference, 2016 (IEEE TENCON 2016) Biology Society (EMBC), 2016, Singapore.

Marsid, Ezzah Atikah and Sugiura, Norio and Zakaria, Zuriati and Othman, Nor'azizi and Utsumi, Motoo and Iwamoto, Koji and Goto, Masafumi and Hara, Hirofumi (2016) Microbial diversity and cyanobacteria species in disturbed and undisturbed peat swamp fores. In: Malaysia Japan Joint International Conference 2016, 2016, Kuala Lumpur, Malaysia.

Mohamad Kasim, Nur Farhana and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Ikegaya, Naoki and Abd. Razak, Azli (2016) Computational study on the influence of different opening position on wind-induced natural ventilation in urban building of cubical array. In: Procedia Engineering, 30 May - 1 Jun, 2016, University Town, Nus, Singapore.

Mohamad Nor, Mohamad Hafizulazwan and Ismail, Zool Hilmi and Ahmad, Mohd. Ashraf (2016) Broadcast control of multi-agent systems with instability phenomenon. In: 2016 IEEE 6th International Conference on Underwater System Technology: Theory and Applications, 13-14 Dec, 2016, Pulau Pinang, Malaysia.

Mohamed, Habibah and Hussin, Nabihah and Ahmad, Fauzan and Ambran, Sumiaty and Wadi Harun, Sulaiman (2016) Optical based relative humidity sensor using tapered optical fiber coated with graphene oxide. In: AIP Conference Proceedings, 2016.

Mohamed Saleh Baqutayan, Shadiya (2014) The psychological outcomes of talent management: the way to optimize employee performance. In: International Conference on Advanced Education and Management (ICAEM2014), 4-5 Jan, 2014, China.

Mohammad, Reza Rostami and Idris, Norbik Bashah and Ismail, Zuraini (2016) A holistic botnet detection framework independent of botnet protocols and architecture. In: 1st International Conference on Advanced Information and Communication Technology, 16 May, 2016, Chittagong, Bangladesh.

Mohd. Khan, Nor Liyana and Ibrahim, Ab. Latif and Askari, Muhamad (2012) Potential of palsar data in retrieving spatial variability of soil moisture in tropical catchment. In: The 33rd Asian Conference On Remote Sensing, 26-30 Nov, 2012, Pattaya, Thailand.

Mohd. Noor, N. and Mohd. Rijal, O. and Ming, J. T. C. and Roseli, F. A. and Ebrahimian, H. and Kassim, R. M. and Yunus, A. (2013) Segmentation of the lung anatomy for high resolution computed tomography (HRCT) thorax images. In: Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics).

Mohd. Noor, Norhayati and Mohd. Mahdzir, Akbariah (2016) Model pengekalan perhubungan perkahwinan pasangan suami isteri di Malaysia. In: 4th Asean Comparative Education Research Network Conference, 2016, Indonesia.

Mohd. Sani, Mohd. Sani and Ibrahim, Ab. Latif and Tam, Tze Huey and Abdul Rahman, Mohammad Zulkarnain (2012) Application of remote sensing and Geographical Information System (GIS) for reservoir water balance analysis. In: Conference.

Mohd. Yakub, Mohd. Fitri and Muhamad, Pauziah and Toh, Hoong Thiam and Md. Noor Rudin, Noor Fawazi and Sarip, Shamsul and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki (2017) Enhancing vehicle ride comfort through intelligent based control. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 2016, USA.

Mohd. Zabidi, Nurulnajah and Ab. Rahman, Ab. Al-Hadi (2016) VLSI design of a fast pipelined 8x8 discrete cosine transform. In: 2016 International Conference on Electrical, Electronic, Communication and Control Engineering, 18-19 Dec, 2016, Johor Bahru, Malaysia.

Mohd. Zaki, Noor Irza and Abu Husain, M. K. and Najafian, G. (2014) The accuracy of the MFMNS and FMNS models in predicting long-term distribution of the extreme values of offshore structural response. In: 33rd International Conference on Ocean, Offshore and Arctic Engineering, ASME 2014, 8-13 June, 2014, USA.

Mohtar, Aminullah and Wai, Shin Ho and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Peng, Yen Liew (2016) Palm oil mill effluent (POME) biogas off-site utilization Malaysia specification and legislation. In: 2nd International Conference of Low Carbon Asia (ICLCA2016), 23 Nov, 2016.

Muhamad Yusoff, Muhamad Roslan and Songip, Ahmad Rahman and Ariffin, Aini Suzana and Baroto, Mas Bambang (2016) Boards engagement in strategy execution towards growth and sustainability. In: International Conference on Innovation in Business and Strategy (ICIBS2016), 2016, Kuala Lumpur, Malaysia.

Muji, S. Z. M. and Sari, S. and Rahim, R. A. and Rahiman, M. H. F. (2013) Optical tomography: a new filter technique for post processing image. In: Proceedings - 2012 IEEE International Conference on Control System, Computing and Engineering, ICCSCE 2012.

Omairi, Amzar and Ismail, Zool Hilmi (2016) Low power wireless temperature and humidity sensing based on CM5000 node and SHT11 sensor. In: 2016 IEEE 6TH International Conference on Underwater System Technology: Theory and Applications, 13-14 Dec, 2016, Pulau Pinang, Malaysia.

Omidinia, Siavash and Masrom, Maslin and Selamat, Harihodin (2013) An examination of the concept of smart school: an innovation to address sustainability. In: Proceedings Of The 2nd International Conference On Advances In Computer Science And Engineering (CSE 2013).

Pakir, Faizal and Abdul Karim, Ahmad Tarmizi and N. L. Ling, Felix and Kassim, Khairul Anuar (2013) Effect of humic acid on geochemistry properties of kaolin. In: Advanced Materials Research.

Rashid, N. A. and Yasin, M. N. M. and Kamardin, Kamilia and Ramli, N. and Jusoh, M. and Murad, S. A. Z. and Sulaiman, M. I. (2016) A study on relay effect via magnetic resonant coupling for wireless power transfer. In: 2nd International Conference on Green Design and Manufacture 2016 (IConGDM 2016), 2016.

Razali, Mohamad Nor Hafidz Arif and Shaikh Salim, Sheikh Ahmad Zaki and Mat Ali, Mohamed Sukri and Arai, Norio (2016) A numerical analysis of wind flow within and above idealised modified terraced house canyon in Malaysia. In: 4th International Conference on Countermeasures to Urban Heat Island (UHI) 2016, 2016, Singapore.

Rijal, O. M. and Abdullah, N. A. and Isa, Z. M. and Noor, N. M. and Tawfiq, O. F. (2013) Shape model of the maxillary dental arch using fourier descriptors with an application in the rehabilitation for edentulous patient. In: Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS.

Romainodin, Ayuni and Ebrahim, Abouzari Lotf and El-Sayed Nasef, Mohamed Mahmoud and Ahmad, Arshad and Md. Sha'rani, Saidatul Sophia (2016) Layer by layer membrane for vanadium redox battery. In: Conference on Emerging Energy and Process Technology, 07-8 Dec, 2016, Port Dickson, Negeri Sembilan, Malaysia.

S.I.M, Aseham and Abdul Rahman, Muhammad Zulkarnain and Ab Wahid, Rasib and A., Ariffin (2013) Estimation of composite hydrodynamic roughness overland in tropical environment using airbone LiDAR: a case study in Hutan Rekreasi Ayer Keroh Melaka. In: Seminar on Advanced Active Remote Sensing (SAARS 2013), 2013, UTM Kuala Lumpur.

See, Yuen Chark and Mohd. Noor, Norliza and Calvin Tan, Y. M. (2017) Investigation of indoor positioning system using visible light communication. In: IEEE Region 10 Conference (TENCON), 2016, 2016, Singapore.

Siew, C. B. and Abdul Rahman, Alias (2013) A schema-aware encoder for Putrajaya 3D. In: Urban And Regional Data Management, UDMS Annual 2013 - Proceedings Of The Urban Data Management Society Symposium 2013.

Tahar, Khairul Nizam and Ahmad, Anuar and Wan Mohd. Akib, Wan Abdul Aziz and Wan Mohd., Wan Mohd. Naim (2012) Aerial mapping using autonomous fixed-wing unmanned aerial vehicle. In: Conference.

Tareq, Mohammad Ali and Ihlasuddini, Habiba Nabila (2016) A review on the board of directors. In: Proceedings International Conference on Innovation and management, Malaysia 2016, 28-30 Nov, 2016, Kuala Lumpur, Malaysia.

Yaakob, Omar and Mohd. Omar, Kamaludin and Wan Abdul Aziz, Wan Aminullah and Md. Din, Ami Hassan (2012) Satellite altimeter ocean wave heights data in South China Sea. In: 8th International Conference on Marine Technology (MARTEC), 2012, Terengganu, Malaysia.

Yamada, Yoshihide and Kamardin, Kamilia and Hakimi, Shayan and Abdul Rahim, Sharul Kamal and Abd. Hamid, Salbiah and Abd. Rahman, Nurul Huda (2016) Proposal of a cylindrical lens antenna for 5G base station. In: Malaysia-Japan Joint International Conference (MJJIC2016), 2016, Kuala Lumpur, Malaysia.

Zainal, Nurbaya and Zulkefle, H. and Mahmood, M. R. (2013) Dielectric and structural properties of RF magnetron sputter grown lead zirconium titanate thin film: a review. In: Advanced Materials Research.

Zakaria, Zarabizan and Ismail, Syuhaida and Md Yusof, Aminah (2013) Effectiveness of pavement management system and its effects to the closing of final account in construction project in Malaysia. In: International Conference on Science and Engineering in Mathematics, Chemistry and Physics (ScieTech), JAN 24-25, 2013, Jakarta, Indonesia.

Zakaria, Z. and Balkhis, I. and Yaacob, S. and Mansor, M. S. B. and Rahim, R. A. and Rahim, H. A. (2013) Evaluation on the sensitivity of tri-coil sensor jig for 3D image reconstruction in magnetic induction tomography. In: Proceedings - UKSim 15th International Conference on Computer Modelling and Simulation, UKSim 2013.

Book

Abd. Rashid, Kamaruzaman (Penterjemah) and Ahmad, Anuar (Penterjemah) and Mohd. Arif, Shahidah (Penterjemah) (1993) Ilmu ukur untuk jurutera edisi kedua. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–81–9

Ahmad, Anuar (Penterjemah) and Mat Amin, Zulkarnaini (Penterjemah) (1998) Unsur-unsur fotogrametri. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0124–2

Buyong, Taher (2007) Spatial data analysis for geographic information science. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0423–4

Buyong, Taher (2006) Spatial statistics for geographic information science. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0393–8

Idris, Ahmad Kamal (Penterjemah) and Ikhsan, Azman (Penterjemah) and Ismail, Issham (Penterjemah) (1997) Kejuruteraan petroleum: prinsip dan amalan (UTM – Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0091–2

Mar Iman, Abdul Hamid and Sipan, Ibrahim @ Atan and Ismail, Suriatini (2012) Geographic information system & spatial analyses in real estate. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0856–0

Md. Yassin, Abu Azam (Penterjemah) and Ismail, Abdul Razak (Penterjemah) and Othman, Ariff (Penterjemah) and Khamis, Azmi (Penterjemah) and Hashim, Ayob (Penterjemah) and Hamid, Mohd. Fauzi (Penterjemah) and Abdul Manaf, Muhammad (Penterjemah) and Shahruddin, Shahrin (Penterjemah) and Hassan, Zulkafli (Penterjemah) (1998) Kejuruteraan penggerudian telaga minyak: prinsip dan praktik. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0117–X

Mohd. Tahir, Abdul Hamid (1990) Asas fotogrametri. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–12–6

Mohd.Tahir, Abdul Hamid (1992) Fotogrametri lanjutan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–17–7

Othman, Arif (Penterjemah) and Derahman, Mohd. Nawi (Penterjemah) and Zakaria, Zainal (Penterjemah) (1998) Asas kejuruteraan reserbor. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0115–3

Thesis

A. Wahab, Nurnabila (2012) Faktor-faktor yang berkaitan dengan pemindahan latihan teknologi maklumat di Majlis Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abdul Manaf, Azizah (1985) Sistem maklumat utiliti di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdullah, Ashraf (2004) Pengkonseptualan sistem maklumat kadaster marin di Semenanjung Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Adnan, Azlina (2003) Sistem bantuan pengurusan kualiti servis sistem maklumat di IPTS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ahmad, Adnan (1999) Gaya berfikir guru terhadap pendekatan penyelesaian masalah lukisan kejuruteraan berdasarkan teori Nedd Herrmann. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Syaza Izyanni (2014) Numerical and graphical descriptive technique for inherent safety assessment in petrochemical industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Sepuan, Meor Azizi Sapawi (2004) Instituting knowledge sharing among senior officers in the prison department of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Akbary, Saeed (2013) Critical factors to assess safety requirements of manufacturing companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alwi, Aznirul Fariz (2004) Sistem carian calon kursus penilaian tahap kecekapan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Amin @ Mohd. Amin, Nor Fadila (1999) Persepsi guru terhadap cabaran pelaksanaan mata pelajaran elektif KBSM lukisan kejuruteraan di sekolah menengah atas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ayazi, Erfan (2013) Critical success factors in enterprise resource planning implementation in industrial organizations : case study (Esfahan steel company). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Aziz, Md. Ali (1994) Model penilaian prestasi organisasi sistem maklumat di sektor awam Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Bade, Abdullah (2003) Pengesanan perlanggaran menggunakan gabungan isipadu penyempadanan berjujukan dalam persekitaran maya interaktif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Bijarchian, Amir (2014) A model to assess the usability of enterprise architecture frameworks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Franklin Jeyasekhar Joseph (2002) Web-based prototype of the workscope management module portion of the refit information system for the royal Malaysian navy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ghazali, Aminuddin (1996) System identification of remotely piloted vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Goh, Seng Loong (2000) An analysis on information technology security standard on selected organisations in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Harold, Dolly Amy (2004) Exploring the notion of service assessment within the context of information system service quality (ISSQ) in the Malaysian Public Service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Hasan, Zulkhairi (1999) Penilaian kefahaman asas pengurusan di kalangan jurutera di projek pelabuhan Tanjung Pelepas, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hatami, Milad (2013) Improving productivity in a bank by using computer simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hayder, Wrya Anwar (2014) Knowledge creation community portal for research development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Hussin, Ruziah (2001) Pandangan pekerja terhadap isu-isu keselamatan dan kesihatan pekerjaan di tapak bina di Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Azlin (2013) Numerical simulation of fluid-solid interaction flow for two different cavity shapes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ja'afar, Ramlan (2000) Pembangunan sistem maklumat pengurusan sumber manusia di L&G-Twintech Institute of Technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Kader, Mokhtar (2001) Identifikasi kompetensi teknologi maklumat (IT) untuk pengurus pertengahan : kajian di institusi pengajian tinggi awam (IPTA) Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Kidam, Kamarizan (2004) Pencapaian program keselamatan dan kesihatan pekerjaan di kilang dakwat pencetak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Koh, Kok Hwee (1998) Information system planning for Maktab Perguruan Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Krishna Nair, Hema Latha (2004) The management information system for overall equipment efficiency (OEE) analysis and decision making. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Lee, Ya Ling (2001) The machine efficiency of (M/M1). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Yong Kian (2013) Computer tools in ideation process among Universiti Teknologi Malaysia industrial design students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lim, Jee Yat (2000) Construction of Kuala Lumpur Tower - a case study of technology transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lum, Kate Siew Yin (2000) Quantitative risk assessment of a petroleum tankyard facility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahjoub, Mohamed Salem (2013) The impact of employees' safety training practices on the relationship between safety climate and safety performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mansor, Mohammad Fakhri (2003) Sistem penjualan kenderaan secara online. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mapoh, Mabeni (1985) Pembangunan sistem komputer grafik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mat Rashid, Abdullah (2001) Pembinaan dan penilaian sistem pengurusan rekod stor bengkel sekolah menengah teknik berasaskan web (SISTOR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Md. Sap, Musfirah (1999) Hubungan di antara keberkesanan perlaksanaan program keselamatan dan kesihatan pekerjaan dengan keselesaan bekerja di dalam industri perkilangan : satu kajian kes di organisasi semi-konduktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Miskon, Suraya (2001) Pembangunan prototaip sistem alatbantu teknik-teknik perancangan sistem maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamad, Liana (2003) Sistem sokongan keputusan belanjawan peribadi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamad, Nor Asikin (2002) Kajian kemahiran penggunaan teknologi maklumat (IT) bagi pustakawan akademik dalam era maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohd. Husny Hamid, Herny Ramadhani (2004) OLAP (On-Line Analytical Processing) : kajian kes kawalan stok di ZFI Marketing Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohd. Salleh, Mohd. Najib (2000) Kualiti perkhidmatan sistem maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohd. Yusof, Noordin (1993) Sistem maklumat pengurusan operasi strategik dan taktikal Angkatan Tentera Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohd. Yusop, Erna Zeehana (2004) Knowledge management system for managing rosettanet implementation in Johore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Muhamad Masngot, Faradila (2004) Pembangunan sistem penilaian pengurusan strategik bagi IPTS menggunakan kaedah penggunaan pemberat : kajian kes di ITP-YPJ. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mustafa, Yusri (2003) Pelaksanaan pengurusan projek pembinaan oleh perunding pengurusan projek (PMC) di Malaysia : projek pembinaan sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Naim, Mohd. Farid (2000) A study on project management for projects with & without project manager. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik Ismail, Nik Isrozaidi (2004) Kajian pengestrakan maklumat ketinggian daripada gambarfoto bercetak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Othman, Faridah (1994) Sistem maklumat pengurusan kakitangan Jabatan Penyiaran Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ponnusamy, Yamunavathy (2004) Sistem bantuan keputusan tindakan disiplin pelajar (SBKTDP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Priasamy, Pandiyan (1999) Pemindahan teknologi : pemerolehan dan penyebaran teknologi oleh Philips Optical Storage Division (POS), Philips Singapore Private Limited dari pejabat induk, Philips Holland dan Belgium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Saad, Aslina (2003) Portal komuniti pendidikan UPSI. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Shilandari, Hooman (2013) Development of a mixed binary integer programming model for nurse-patient assignment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syed Walid Syed Omar, Al-Saggoff (2013) Human approach in analyzing slips and falls using siliconcoach software: a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Takavar, Tannaz (2014) Parental acceptance of the e-waris student information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Tan, Yee Ling @ Irene (2000) Information system for work-in-process (WIP) tracking : a case study in Altera Corp. (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tukiman, Norbaiti (2003) Sistem bestari pengurusan agensi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yaakub, Nor Asiah (2003) Sistem sokongan keputusan perancangan pembelian kenderaan secara sewa beli. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yanuar, Yerdi (1997) Sistem bantuan keputusan berasaskan model simulasi untuk sistem pengagihan simen : kajian kes di P T Semen Padang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yen , Lan Hong (2004) Pelaksanaan konsep bandar pintar (Intelligent City) ke arah perancangan bandar era revolusi teknologi maklumat (IT) : kajian kes : Cyberjaya, Kawasan Koridor Raya Multimedia (MSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yunus, Riduan (2003) Masalah ergonomik di tapak bina : kajian kes di Daerah Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Norhanim (2000) Penyediaan pelan kualiti projek untuk perunding penyelia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.