Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: ' | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items at this level: 3100.

'

'Ainullotfi, A. A. and Ibrahim, Ab. Latif and Masron, T. (2014) A study on integrated community based flood management with remote sensing technique in Kelantan. In: 34Th Asian Conference on Remote Sensing 2014, 2014.

A

Abd. Rashid, Nor Suhada and Askari, Muhamad and Tanaka, Tadashi and Simunek, Jirka and van Genuchten, Martinus Th (2015) Inverse estimation of soil hydraulic properties under oil palm trees. Geoderma, 241-42 . pp. 306-312. ISSN 0016-7061

A Kadir, Abd Majid and Tan, Say Kee (1995) Analisis Kaedah Kinematik GPS Dalam Penentududukan. Buletin Ukur, 6 (2). pp. 113-124. ISSN 0128-4274

A Rashid, Ahmad Safuan (2013) Quantifying pavement interface bond strength trought different approaches : a compiliation of testing device. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

A Rashid, Ahmad Safuan (2013) Relationship between liquidity index and strength of stabilised laterite. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

A., Faridah and A., Abdullah Sani and R., Ismail (2004) Bridging the Gap: Architecture and Structural Engineering. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

A., Marto and A., Adnan and Hendriyawan, Hendriyawan and M., Irsyam (2010) Microzonation maps for Kuala Lumpur and Putrajaya. Malaysian Journal of Civil Engineering, 23 (1). pp. 63-85. ISSN 1823-7843

A. A Elkaseh, Alaa (2009) Simulation of supply chain management for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Abdullah, Rini and Murphy, William and J. Fowell, Robert (2012) Discrete element study of a complex block-flexural toppling failure in a rock slope. In: ISRM Regional Symposium - 7th Asian Rock Mechanics Symposium, 15-19 Oct 2012, Seoul, Korea.

A. Aziz, Md. Maniruzzaman and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Md Nor, Hasanan and Che` Mat, Nurulain and Che Wan, Che Norazman (2014) Properties of asphaltic concrete containing sasobit®. Jurnal Teknologi, 71 (3). pp. 27-31. ISSN 0127-9696

A. Aziz, Md. Maniruzzaman and Rahman, Md. Tareq and Haininl, Mohd. Rosli and Wan Abu Bakar, Wan Azelee (2016) Alternative binders for flexible pavement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11868-11871. ISSN 1819-6608

A. H., Nur Hidayah and Md. Nor, Hasanan and Putra Jaya, Ramadhansyah (2016) Effect of open-graded coarse aggregate on concrete paving blocks properties for pavement. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11836-11839. ISSN 1819-6608

A. K., Abd. Majid (1996) Pelarasan ukur lanjutan. Documentation. Fakulti Kejuruteraan & Sains Geoinformasi, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

A. K., Abd. Majid and Hisham, Abdullah (2006) Prinsip dan Amalan Sistem Maklumat Tanah. Other. Fakulti Kejuruteraan & Sains Geoinformasi, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

A. K., Abd. Majid and Hisham, Abdullah (2005) Sistem maklumat geografi II. Other. Fakulti Kejuruteraan & Sains Geoinformasi, Universiti Teknologi Malaysia.

A. K., Abd. Majid and Kit Meng, Yip and Musa, Tajul A. (1997) The adjustment and analysis of dam monitoring networks. Buletin Geoinformasi, 1 (3). pp. 119-133. ISSN 1394-7702

A. K., Abd. Majid and Ses, Sahrum and Hisham, Abdullah and Abu, Samad (2002) Current and future geodetic activities in Malaysia. In: GNSS Forum, 17-18 May 2002, Hong Kong.

A. K., Abd. Majid and Ses, Sahrum and Mohd Omar, Kamaludin and Omar, Abdullah Hisham and Abu, Samad and Nordin, Soeb (2003) Geocentric Datum GDM2000 for Malaysia: implementation and implications. In: Seminar on GDM2000, 28 August 2003, Department of Surveying & Mapping Malaysia, Kuala Lumpur.

A. K., Abd. Majid and Sharif, Ayob and Omar, Abdullah Hisam (2000) Ukur GPS. Documentation. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

A. Kadir, Abd. Majid and Desa, Ghazali and Omar, Abdullah Hisam (2002) The development of computer package for the teaching and learning of space technology applications in surveying and natural resource management. Project Report. Universiti Teknologi Malaysia, Malaysia.

A. Kadir, Abd. Majid and Desa, Ghazali and Omar, Abdullah Hisam (2004) Geospatial data infrastructure: concepts and applications. In: Spatial Data Infrastructure Research Group, February,19th, 2004,, MaCGDI, Kuala Lumpur. (Unpublished)

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2005) Coordinated cadastral system for Peninsular Malaysia : from concept to reality. In: International Seminar on Geoinformation 2005, September, 27-29, 2005, Park Royal Hotel, Penang.

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2003) Methodology for the Development of National Digital Cadastral Database. In: Kursus Coordinated Cadastral System (CSS), October, 21st, 2003, Institut Tanah & Ukur Negara Behrang, Perak. (Unpublished)

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2004) Methodology for the Development of National Digital Cadastral Database(NDCDB). In: Kursus Coordinated Cadastral System (CSS), July, 2004, Institut Tanah & Ukur Negara Behrang, Perak. (Unpublished)

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2003) Pangkalan Data Ukur Kadaster(PDUK). In: Kursus Penilaian Tahap Kecekapan untuk Jurukur Gred J54 di bawah Sistem Saraan Malaysia, 19 Ogos 2003, INTEKMA Resort & Convention Centre, Shah Alam, Selangor. (Unpublished)

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2002) Pilot project coordinated cadastral system. In: Kursus Coordinated Cadastral System (CSS), June, 10th-12th,2002, Institut Tanah & Ukur Negara ,Behrang, Perak. (Unpublished)

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2006) Prinsip dan amalan sistem maklumat tanah. Technical Report. Universiti Teknologi Malaysia, Malaysia.

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2005) Sistem maklumat geografi II. Other. Universiti Teknologi Malaysia, Malaysia.

A. Kadir, Abd. Majid and Omar, Abdullah Hisam (2006) Integration of land records and satellite derived data for the development of modern cadastre in Malaysia. Project Report. Universiti Teknologi Malaysia, Malaysia.

A. Kadir, Abd. Majid and Ses, Sahrum and Desa, Ghazali and Omar, Kamaludin and Omar, Abdullah Hisam (2002) Studies toward the development of implementation plan of coordinated cadastral system for Peninsular Malaysia. In: International Symposium and Exhibition on Geoinformation Global Trends: Geoinformation For The New Economy, October, 22nd-24th, 2002, Nikko Hotel. (Unpublished)

A. Kadir, Abd. Majid and Ses, Shahrum and Omar, Kamaludin and Omar, Abdullah Hisam (2003) Development of geodetic GPS infrastructure and its applications:the Malaysia experience. In: Seminar On GPS, July, 22nd, 2003, Dubai, United Arab Emirates. (Unpublished)

A. Kadir, Abd. Majid and Ses, Shahrum and Teng, Chee Boo and Tan, Seng Huat (1998) Recovery of Bearings and Distances for Internal Lots From Cadastral Perimeter Survey Data: Case Studies in Several States of Peninsular Malaysia. Buletin Geoinformasi, 2 (3). ISSN 1394-7702

A. Kadir, Abd. Majid (2006) Undang-undang hak milik tanah dan peraturan-peraturan untuk pelajar kejuruteraan geomatik. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

A. Kadir, Abd. Majid and Ses, Sharum and Subramaniam, Mohan (1998) Ukur utiliti bawah tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

A. Khalid, Nur Hafizah and Hussin, Mohd. Wand and Ismail, Mohammad and Basar, Norazah and Ismail, Mohamed A. and Lee, Han-Seung and Mohamed, Azman (2015) Evaluation of effectiveness of methyl methacrylate as retarder additive in polymer concrete. Construction and Building Materials, 93 . pp. 449-456. ISSN 0950-0618

A. Malek, Marlinda and Shamsuddin, Mariyam and Harun, Sobri (2010) Restoration of hydrological data in the presence of missing data via kohonen self organizing maps. In: New Trends in Technologies. InTech, Croatia, pp. 223-242. ISBN 978-953-7619-62-6

A. Rahim, Mohamad Kamal and Danjuma Bala, Bashir and Murad, N. A. (2012) Bandwidth enhanced microstrip patch antenna using metamaterials. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11-13 Dec 2012, Avillion Legacy Melaka, Melaka.

A. Rashid, Ahmad Safuan and Kassim, Khairul Anuar and Katimon, Ayob and Md. Noor, Norhazilan (2008) Determination of plastic limit of soil using modified method. Malaysian Journal of Civil Engineering, 20 (2). pp. 295-305. ISSN 1823-7843

A. Rashid, Ahmad Safuan (2013) A comparative study on three-dimensional and two-dimensional slope stability analysis in calculating the value of factor of safety. In: GEOCON International Conference 2013, Johor Malaysia, 28-30 October 2013 , 2013.

A. Rashid, Ahmad Safuan (2012) Determination of failure surface pattern due to strip footing. In: Conference.

A. Rashid, Ahmad Safuan (2013) Influence of transport layer slope under rainfall infiltration. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013).

A. Rashid, Ahmad Safuan (2015) Settlement of strip footing on sandy soil due to eccentricity. In: First International Conference on Science, Engineering and Environment, 19-21 Nov, 2015, Japan.

A. Rashid, Ahmad Safuan and Md. Noor, Norhazilan and Yaacob, Haryati and Lim, Kar Sing and Kalatehjari, Roohollah and Moayedi, Hossein (2014) Relationship between liquidity index and stabilized strength of local subgrade materials in a tropical area. Measurement, 55 . pp. 231-237. ISSN 0263-2241

A. Rashid, Ahmad Safuan and Yaacob, Haryati and Md. Noor, Norhazilan and Bunawan, Aliff Ridzuan and Awg Shahminan, Dyg Nur Intan Afzan (2014) Relationship between strength and liquidity index of cement stabilized laterite for subgrade application. International Journal of Soil Science, 9 (1). pp. 16-21. ISSN 1816-4978

A. Rashid , Ahmad Safuan (2013) Bearing capacity of soil reinforced with soil-cement columns formed by the deep mixing method. In: Third International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, Nov. 13-15, 2013, ISBN: 978-4-9905958-2-1 C3051.

A. Rashid , Ahmad Safuan (2013) Coupling effect of scution variation on riversidebank stability. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013).

A. Rasid, Zainudin and Amran, Ayob and Zahari, Rizal and Mustapha, Faizal and Majid, Dalila and Varatharajoo, Renuganth (2011) Buckling and post buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 . pp. 530-535. ISSN 1013-9826

A. Rasid, Zainudin and Ayob, Amran and Zahari, Rizal and Mustafa, Faizal and Majid, Dalila and Varatharajoo, Renuganth (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 . pp. 536-541. ISSN 1013-9826

A. Rasid, Zainudin and Zahari, R. and Ayob, Amran (2014) The instability improvement of the shape memory alloy composite plates subjected to in-plane parabolic temperature distribution. Applied Mechanics and Materials, 554 . pp. 32-36. ISSN 1660-9336

A. Rasid, Zainudin and Zahari, Rizal and Ayob, Amran (2014) The instability improvement of the symmetric angle-ply and cross-ply composite plates with shape memory alloy using finite element method. Advances in Mechanical Engineering, 2014 . pp. 1-11. ISSN 1687-8132

A.M.Mahroug, Elhusain (2009) Evaluation of methods to determine bitumen content of hot mix asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A.Rahman @ A.Rahim, Nor Hidayah (2013) Design of mechanically stabilized earth wall-reinforced earth wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab Halim, M. H. and Nor Anuar, A. and Abdul Jamal, N. S. and Azmi, S. I. and Ujang, Z. and Bob, M. M. (2016) Influence of high temperature on the performance of aerobic granular sludge in biological treatment of wastewater. Journal of Environmental Management, 184 . pp. 271-280. ISSN 0301-4797

Ab Rahman, Rosdi (1995) Industrial and Business Park Development and Prospects. Buletin Ukur, 6 (1). pp. 1-6. ISSN 0128-4274

Ab. Razak, M. Z. and Saleh, Z. S. and Ahmad, F. and Anyi, C. L. and Harun, S. W. and Arof, H. (2016) High-power Q-switched erbium-ytterbium codoped fiber laser using multiwalled carbon nanotubes saturable absorber. Optical Engineering, 55 (10). ISSN 0091-3286

Ab. Aziz, Salsabila (2009) The interpretation of full scale instrumented load testing and the prediction of settlement for single bored pile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Halim, Mohd. Hakim and Anuar, Aznah Nor and Azmi, Siti Izaidah and Jamal, Nur Syahida Abdul and Wahab, Norhaliza Abdul and Ujang, Zaini and Shraim, Amjad and Bob, Mustafa M. (2015) Aerobic sludge granulation at high temperatures for domestic wastewater treatment. Bioresource Technology, 185 . pp. 445-449. ISSN 0960-8524

Ab. Halim, Mohd. Hakim and Azmi, Siti Izaidah and Abdul Jamal, Nur Syahida and Anuar, Aznah Nor and M. Bob, Mustafa and Ujang, Zaini (2014) Aerobic sludge granulation at high temperature-low humidity for domestic wastewater treatment. In: The Seventh Annual Conference on the Challenges in Environmental Science & Engineering (CESE 2014), 12-16 Oct, 2014, Johor Bahru, Malaysia.

Ab. Halim, Mohd. Hakim and Azmi, Siti Izaidah and Abdul Jamal, Nur Syahida and Anuar, Aznah Nor and M. Bob, Mustafa and Ujang, Zaini (2014) Cultivation and characteristics of aerobic granular sludge for simultaneous organics and nutrients removal performances at high temperature. In: National Seminar on Civil Engineering Research (SEPKA 2014), 9-10, April 2014, Skudai, Johor.

Ab. Kadir, Mariyana Aida and Abdul Awal, A. S. M. (2014) Finite element modelling of reinforced concrete slab at elevated temperature using ABAQUS. In: Applied Mechanics and Materials, 20-21 Dec, 2014, Korea.

Ab. Kadir, Mariyana Aida and Abdul Awal, A. S. M. and Md. Tahir, Mahmood (2015) Finite element modelling of compartment fire using ABAQUS. Jurnal Teknologi, 74 (4). pp. 33-38. ISSN 2180-3722

Ab. Kadir, Mariyana Aida (2013) Modelling of heat tranfer analysis of the roorkee frame. In: The 9th International Conference on Geotechnical and Transportation Engineering (GEOTROPIKA 2013) and Construction The 1st Conference on Construction and Building Engineering (ICONBUILD 2013), 2013.

Ab. Latif, Amminudin (2009) Relationship between international roughness index (IRI) and present serviceability index (PSI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Rahim, Razani (2002) Pengenalan kepada undang-undang tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Ab. Rahim, Razani (2006) Pengenalan kepada undang-undang tuan tanah dan penyewa. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Ab. Rahim, Razani (2001) Undang-undang torts kecuaian. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Ab. Rahim , Hairol (2010) Effective project delivery-strategies for successful implementation of projects under 10th Malaysia plan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Rahman, Rosnita (2009) Modelling of trip generation based on school attraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abas, Darul Nafis (2016) The motivation factors in the provision of green criteria in green building development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abas, Nor Haslinda (2009) Safety cost in scaffolding works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abas, Shahrul Izam (2004) Faktor utama motivasi jurutera dan juruteknik dalam Firma Berorientasikan teknologi Tinggi : Kajian Kes Di Syarikat ABC. Masters thesis, Universiti Teknologi Malaysia, FPPSM.

Abbas, Hajer Satih (2013) Parametric analysis of corrugated plate by using ANSYS finite element software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abbas, K. N. and Bidin, N. and Al-Azawi, M. A. and Al-Asedy, H. J. (2016) Nanostructural and optical properties of hierarchical ZnO grown via hydrothermal method. Jurnal Teknologi, 78 (3). pp. 1-5. ISSN 0127-9696

Abbas, Mohd. Azwan and Setan, Halim (2005) Software development for real time data capturing and least square estimation analysis. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29/9/05, Pulau Pinang.

Abbas, Mohd. Azwan and Setan, Halim and Hashim, Khairil Afendy (2006) RETIME software for real time data acquisition using LEICA TCA series. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Abbas, Mohd. Azwan and Setan, Halim and Majid, Zulkepli and Chong, Albert K. and Lau, Chong Luh and Mohd. Ariff, Mohd. Farid and M. Idris, Khairulnizam (2013) Improvement in accuracy for three-dimensional sensor (faro photon 120 scanner). IJCSI International Journal of Computer Science, 10 (1). pp. 176-182. ISSN 1694-0814

Abbaszadehfallah, Iman and Esmaeeli, Hamed and Che Puan, Othman and Hosseini, Seyed Hossein (2012) Merging gap acceptance at midblock u-turn facility (a case study on multilane divided highway in Malaysia). In: 2012 International Conference on Civil Engineering and Transportation, 2012.

Abd Majid, Muhd Zaimi (2013) Energy efficiency for existing toll plazas. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

Abd Majid, Muhd Zaimi (2013) Establishment of criteria for design and construction activities of green highway development. In: 1st International Conference on Construction and Building Engineering (ICONBUILD) GEOCON2013 ,28th-30th OCTOBER 2013, Johor Bahru Malaysia.

Abd Rahman, Norhan (2013) Impact of urban development on groundwater quality in Madinah City, Saudi Arabia. In: 6th International Perspective on Water Resources & The Environment , 2013.

Abd Rahman , Norhan (2013) Adopting mitigation measure for ecology and ecosystem of highway. In: International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), 2013.

Abd. Aziz, Mohd. Farid and Chek, Desmond Chang Yih and Arora, Vijay K. (2012) Device and circuit modeling of nano-cmos. In: Computational Nanotechnology: Modeling and Applications With MATLAB. Penerbit UTM, Skudai, Johor, pp. 21-29. ISBN 978-967-354-189-8

Abd. Aziz, Mohd. Farid and Othman, Mohd. Fauzi (2012) Designing sensor system for detecting chicken movement and behavior. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 75-94. ISBN 978-967-354-187-4

Abd. Ghafar, Nor Hayati (2004) Sustainable housing : LFEA of precast frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Halim, Fazzarieyyah (2014) Choice of alternative dispute resolutions in construction disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Halim, Nur Hidayah and Md. Nor, Hasanan and Putra Jaya, Ramadhansyah (2015) Permeability and strength of porous concrete paving blocks with different sizes of coarse aggregate. In: International Conference on Green Chemical Engineering Technology, 24-25 Nov, 2015, Melaka, Malaysia.

Abd. Halim, Shahliza (1999) Feature extraction and clustering of trademark images : a comparison between geometric moment invariant and zernike moment invariant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abd. Hamid, Abdul Murad (2013) Pembangunan dan penilaian komik penceritaan digital dalam persekitaran pembelajaran berasaskan teori konstruktivisme bagi pembelajaran Bahasa Melayu pelajar Pendidikan Khas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Hamid, Mohd. Harith (2007) The internal rate of return method (I.R.R) in estimating returns from property investments. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Abd. Hamid, Noorhayati (2015) Jabatan Kerja Raya project delivery excellence through effective project communication management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Hamid, Hazlan and Makhtar, Ahmad Mahir and Awang, Abdullah Zawawi and Omar, Wahid (2002) Study on the behaviour of repaired reinforced concrete (RC) concrete elements. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Kadir, Aeslina (2005) Leachate treatibility study in subsurface flow constructed wetlands. In: Proceedings Of National Civil Engineering Conference (NACEC)2005, Johor, 2005, Johor.

Abd. Kadir, Siti Hajar (2011) Construction safety management in Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Karim, Zaini (2013) Influence of flaky aggregate on marshall properties for asphaltic concrete AC20 mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Khalid, Harith Fadzilah and Abdul Rahman, Alias (2007) Data structuring for 3D spatial objects. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Abd. Khalid, Nur Hafizah and Hussin, Mohd. Warid and Mirza, Jahangir and Ariffin, Nur Farhayu and A. Ismail, Mohamed and Lee, Han Seung and Mohamed, Azman and Putra Jaya, Ramadhansyah (2016) Palm oil fuel ash as potential green micro-filler in polymer concrete. Construction and Building Materials, 102 . ISSN 0950-0618

Abd. Khalid, Nur Hafizah and Hussin, Mohd. Warid and Mohamad Yatim, Jamaludin and Rafique Bhutta, Muhammad Aamer and Ismail, Mohammad and Mohamed, Azman (2014) Tensile behaviour of kenaf fiber reinforced polymer composites. Jurnal Teknologi (Sciences and Engineering), 69 (3). pp. 11-15. ISSN 0127-9696

Abd. Latef, Mohd. Zukhairi and Mahmud, Mohd. Razali (2006) GIS application in oil and gas exploration & production activities based on past experience. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Abd. Majid, Zakiah and Setan, Halim and Majid, Zulkepli and Chong, Albert K. and Ahmad, Anuar (2004) Texture mapping for 3D craniofacial surface model: preliminary results. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Abd. Majid, A. K. and Desa, Ghazali and Musa, Tajul A. (1997) Pergau Reservoir Information System (PRIS) for mapping and sedimentaion studies: A study on the development of the reservoir database. In: The 18th Asian Conference on Remote Sensing (ACRS) 1997, 10 Nov 1997, The Nikko Hotel, Kuala Lumpur.

Abd. Majid, A. K. and Subramaniam, Mohan (1999) Pemetaan Padang Golf dengan Menggunakan Teknik Kinematik GPS ( ON-THE-FLY ). Buletin Geoinformasi, 3 (1). pp. 1-12. ISSN 1394-7702

Abd. Majid, Muhd. Zaimi and Azmi, Ade (2006) Knowledge management and project performance in Malaysian construction consulting companies. In: International Conference on Computing and Decision Making in Civil and Builiding Engineeering, 2006.

Abd. Majid, Muhd. Zaimi and Fulazzaky, Mohamad Ali and Talaiekhozani, Amirreza and Ponraj, Mohanadoss (2014) Removal of formaldehyde from polluted air in a biotrickling filter reactor. Desalination and Water Treatment, 52 (19-21). pp. 3663-3671. ISSN 1944-3986

Abd. Majid, Muhd. Zaimi and M. S., Jamiah (2004) Engineering doctorate (EngD) programme at Universiti Teknologi Malaysia. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abd. Rahim, A. F. and Hashim, M. R. and Ali, N. K. (2011) Characterization of ge nanostructures embedded inside porous silicon for photonics application. Sains Malaysiana, 40 (1). pp. 5-8. ISSN 0126-6039

Abd. Rahim, Mashkurah and Wan Ibrahim, Wan Aini and Ramli, Zainab and Sanagi, Mohd. Marsin and Aboul Enein, Hassan Y. (2016) New sol-gel hybrid material in solid phase extraction combined with liquid chromatography for the determination of non-steroidal anti-inflammatory drugs in water samples. Chromatographia, 79 (7-8). pp. 421-429.

Abd. Rahim , Nurzalisa (2010) Sistem perolehan reka dan bina bagi projek Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Fazli and Setan, Halim and Chong, Albert K. and Majid, Zulkepli and Ahmad, Anuar (2004) Comparison of camera calibration parameters using Photomodeler and Australis. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Abd. Rahman, Norhan and Abu Hassan, Shukur (2008) Investigation of the hydraulic characteristics for portable rubbish & sediment trap. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Abd. Rahman, Ahmad Baharuddin and Chan, Dennis Paul Leong and Saim, A. Aziz and Osman, Mohd. Hanim (2006) Hybrid beam-to-column connections for precast concrete frames. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abd. Rahman, Ahmad Baharuddin and Ghazali, Abdul Rahim and Abd. Hamid, Zuhairi (2008) Comparative study of monolithic and precast concrete beam-to-column connections. Malaysian Construction Research Journal, 2 (1). pp. 42-55. ISSN 1985-3807

Abd. Rahman, Ahmad Baharuddin and Goh, Hiang Miang and Ahmad, Yusof (2015) Grouted pipe with double spirals for precast concrete connections. In: 6th International Conference on Manufacturing Science and Technology (ICMST 2015), 1-2 Jun, 2015, Brunei Darussalam.

Abd. Rahman, Ahmad Baharuddin and Ling, Jen Hua and Ibrahim, Izni Syahrizal and Abd. Hamid, Zuhairi (2010) Investigating the performance of grouted sleeve connectors under tensile load. Malaysian Construction Research Journal, 6 . pp. 39-55. ISSN 1985-3807

Abd. Rahman, Ahmad Baharuddin and Mohammed, Nuria S. (2015) Behaviour of polymer grouted splices under increasing tensile load. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Abd. Rahman, Ahmad Baharuddin and Rais, Ahmad Zaidon (2005) The effects of diaphragm components in resisting lateral stability of precast concrete frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Ahmad Baharuddin and Saim, Abd. Aziz and Md. Tahir, Mahmood and Mohammad, Shahrin (2001) Analytical studies of the behaviour of semi-rigid non-sway frames with tubular columns. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rahman, Ahmad Baharuddin and Tan, Kee Hong and Ibrahim, Izni Syahrizal and Mohamed, Roslli Noor (2015) Influence of rectangular steel splice-sleeve for precast concrete connection. Jurnal Teknologi, 77 (12). pp. 45-54. ISSN 2180-3722

Abd. Rahman, Ana Rozaininaida (2004) Masalah hubungan sub-kontraktor (domestik) dengan kontraktor utama dalam projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Azlan (2013) Modal parameters and their influential factors in a prestressed concrete panel. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), 2013.

Abd. Rahman, Ismail (2007) Correlation of cone resistance with undrained shear strength for clay soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Mohd. Shahrizan (2013) Project information collaboration using P6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Muhammad Faiz and Zakaria, Rozana (2016) Highway and life cycle costing as decision-making support system model. In: International Conference on Science, Engineering, Management and Social Sciences (ICSEMSS 2016), 04 Oct, 2016, Johor Bahru, Malaysia.

Abd. Rahman, Muhammad Zulkarnain and Ibrahim, Ab. Latif and Wan Kadir, Wan Hazli and Alkema, Dinand (2007) Flood hazard simulation for development plans in urban environment: a case study in Naga City, the Philippines. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre, Johor Bahru, Johor.

Abd. Rahman, Norhan (2005) Evaluation study of infiltration in sewerage system. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd. Rahman, Norhan (2005) Groundwater study for alluvial aquifer in tioman island. In: Prosiding Seminar Kebangsaan Penyelidikan Kejuruteraan Awam (SEPKA 2005), 2005, Johor.

Abd. Rahman, Norhan and Su, Kong Ngien and Ahmad, Kamarudin and Lewis, Roland W. (2012) Double-porosity in soil. In: Conference.

Abd. Rahman, Norhan and Mohd. Kassim, Amir Hashim (2000) Numerical modelling of multiphase flow, heat flow and pollutant transport in deforming porous media for subsurface systems. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abd. Rashid, Nor Suhada (2012) Determining near saturated soil hydraulic properties at oil palm plantation using wooding equation and inverse solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rasid, Kamaruzaman (2006) Ilmu ukur dan pemetaan. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Abd. Rasid, Kamaruzaman (2003) Ukur kadaster untuk pentadbir tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Abd. Rasid, Kamaruzaman and Daud, Adib Azhari (2003) Pengenalan hak milik strata. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Abd. Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan and Yahya, Mohd. Yazid (2012) Electrically conductive nanocomposites of epoxy/polyaniline nanowires doped with formic acid: effect of loading on the conduction and mechanical properties. Nano, 7 (5). ISSN 1793-2920

Abd. Samad @ Mahmood, Md. Fahmi (2001) Management of punching oil study for stamping process efficiency increment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Samal, Roslinda and Mohd. Ali, Nasty and Marsono , Abdul Kadir (2008) The optimum location of outrigger in reducing the along-wind and across-wind responses. Malaysian Journal of Civil Engineering, 20 (2). pp. 223-241. ISSN 1823-7843

Abd. Samat, Roslida and Chua, Fong Teng and Mohd. Mustakim, Nur Akmal Hayati and Anuar, Fatin Izzaidah and Sa'ad, Sariffuddin (2016) Framework for evaluating lateral resistance of diagrid with base column. Malaysian Journal of Civil Engineering, 28 (2). pp. 130-139. ISSN 18237843

Abd. Wahab, A. K. and Said, M. S. M. and Ishak, D. S. M. and Jamal, M. H. and Hasan, R. C. (2015) Application of region growing segmentation method for mangrove zonation at Pulau Kukup, Johor. In: The 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov, 2015, Kedah, Malaysia.

Abd. Wahab, Ahmad Khairi (1996) Coastal hydraulics modeling: model set up and data collection. Jurnal Kejuruteraan Awam, 9 (2). pp. 59-77. ISSN 0128-0147

Abd. Wahab, Ahmad Khairi and Othman, Norasman and Jamal, Mohamad Hidayat (2012) The effect of beach groundwater table on swash zone sediment transport: a review. In: 2nd International Conference on Water Resources (ICWR 2012), 5-6 Nov 2012, Bayview Hotel, Langkawi, Kedah.

Abd. Wahab, Muhammad Syimir (2015) Trend of parking demand at Machap Northbound Rest Area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdalhadi, Mohammed R. M. (2013) Comparative study of georefference technique using photogrammtric and geographical information system softwares. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdelalim, A. M. K. and Abdelaziz, G. E. and Fawzy, Y. A. (2006) Effectiveness and mechanism of corrosion inhibiting admixtures. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5 - 6 September 2006, Kuala Lumpur, Malaysia.

Abdelaziz, G. E. (2006) Effect of application time of water-based curing compound on strength, hardness, sorptivity and porosity of blending concretes. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdelgalil, A. and Md. Nor, Hasanan (2014) The influence of block thickness on the performance of asphalt paving blocks. Research Journal of Applied Sciences, Engineering and Technology, 7 (10). pp. 2129-2134. ISSN 2040-7467

Abdelgalil, Ahmed S. A. (2010) Comparative assessment of signalized and unsignalized roadway intersections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelrahim Musa Mahgoub Hamadelnil, (2014) Optimum analysis of offshore structures lifting padeyes using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelrhman, Ahmed Mohammed and Leong, Mohd. Salman @ Yew Mun and Lim, Meng Hee and Ngui, Wai Keng (2015) A comparative study of reassigned conventional wavelet transform for machinery faults detection. In: Applied Mechanics and Materials, 1-4 Dec, 2015, Batu Pahat, Johor.

Abdul Awal, A. S. M. (1998) A study of strength and durability performances of concrete containing palm oil fuel ash. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Awal, A. S. M. and Hussin, M. W. (2009) Strength modulus of elasticity and shrinkage behaviour of POFA concrete. Malaysian Journal of Civil Engineering, 21 (2). pp. 125-134. ISSN 1823-7843

Abdul Awal, A. S. M. and Mariyana, A. A. K. and Hossain, M. Z. (2015) Some aspects of physical and mechanical properties of sawdust concrete. In: Proceedings of The 5th International Conference on Geotechnique, Construction Materials and Environment (GEOMATE), 16-18 Nov, 2015, Osaka, Japan.

Abdul Awal, A. S. M. and Rahman, M. M. (2015) Deformation behaviour of self-compacting concrete containing high volume palm oil fuel ash. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Abdul Awal, A.S. M. and Hussin, M. Warid (2010) Influence of palm oil fuel ash in reducing heat of hydration of concrete. Journal of Civil Engineering (IEB), 38 (2). pp. 153-157. ISSN 1993-8128

Abdul Awal, A.S.M. and Mohammad, Shahrin and Mazlan, Dianah (2013) The role of expanding admixture in the development of strength of prepacked concrete. In: Proceedings of The Thirteenth East Asia Pacific Conference on Structural Engineering and Construction (Easec-2013), 2013.

Abdul Awal, Abu S. M. and Mohammadhosseini, Hossein and Hossain, Md. Zakaria (2015) Strength, modulus of elasticity and shrinkage behaviour of concrete containing waste carpet fiber. International Journal of GEOMATE, 9 (1). pp. 1441-1446. ISSN 2186-2982

Abdul Aziz, Azmahani (2012) Developing a structural model to assess students’ knowledge- attitudes towards sustainability. In: International Conference on Teaching and Learning in Higher Education (ICTLHE 2012) in conjunction with RCEE & RHED 2012, 10-12 April 2012.

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) Development of students’ knowledge-behavioural changes in relation to sustainability through a case study. In: 6th International Forum on Engineering Education (IFEE 2012).

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) A longitudinal study on the impact of cooperative problem-based learning in inculcating sustainable development. In: The 4th International Research Symposium on Problem-Based Learning (IRSPBL) 2013, 2013.

Abdul Aziz, Mohd. Sakirin and Mohd. Jamail, Nor Akmal and Muhamad, Nor Asiah (2013) Effect of surface tracking on lldpe-nr/tio2 nanocomposite conductivity using PDC technique. World Academy of Science, Engineering and Technology, 77 . pp. 688-692. ISSN 2010-3778

Abdul Aziz, Noor Azeera (2012) Embedding corporate social responsibility in information security management system as human factor solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz, Roseni and James, Adeyemi Ademola and Abdul Kadir, Aini Zuhra and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2015) Effect of working posture on back pain occurrence among electronic workers in Malaysia. In: Procedia Manufacturing, 4-6 Feb, 2015, Indonesia.

Abdul Aziz, Sa'ardin (2002) Numerical study of flow in an internally ribbed channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Sue Alina (2009) Effects of mortar towards the NDT reading equipment a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz, Zainal and Salah, Faisal and Ching, Dennis Ling Chuan (2012) Exact solution for Rayleigh-Stokes problems of an Oldroyd-b fluid in a porous medium and rotating frame. Journal of Porous Media, 15 (10). pp. 901-908. ISSN 1934-0508

Abdul Aziz , Mohd. Azizi (2010) Performance of stone mastic asphalt using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Gafoor, Mohamed Saakhee (2013) Simulation of blast-induced failure of case study structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Ghani, Juliana (2014) The effect of compaction pressure and addition of silica on microstructure, thermal property and mechanical strength of polyurethane-silica RHA composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Halim, Nur Hidayah and Md. Nor, Hasanan and Putra Jaya, Ramadhansyah (2014) Porous concrete paving blocks using coarse aggregate. Applied Mechanics and Materials, 554 . pp. 111-115. ISSN 1660-9336

Abdul Hamid, Abdul Rahim (2012) An efficient method for the calculation of eigenvector design sensitivities. In: Conference.

Abdul Hamid, Abdul Rahim (2015) Performance of cold in place recycle method for different stabilization agents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Hamid, Abdul Rahim and A. Kadir, Muhamad Firdauz (2014) Safety climate among contractor organizations. In: National Seminar on Civil Engineering Research SEPKA 2014, 14-15 April, 2014, Skudai, Johor.

Abdul Hamid, Abdul Rahim and Abd Majid, Muhd. Zaimi and Singh, Bachan (2008) An overview of construction accidents in Malaysia. In: Issues In Construction Industry. Penerbit UTM , Johor, pp. 110-123. ISBN 978-983-52-0568-2

Abdul Hamid, Abdul Rahim and Afshar, Raheleh Heydari (2014) The prevalence of stress among project manager at construction sites. In: National Seminar on Civil Engineering Research SEPKA 2014, 14-15 April, 2014, Skudai, Johor.

Abdul Hamid, Abdul Rahim and Besawa Jagar Singh, Bachan Singh and Mazlan, Muhammad Shahrom (2013) The construction labour shortage in Johor Bahru, Malaysia. IJRET: International Journal of Research in Engineering and Technology, 2 (10). pp. 508-512. ISSN 2319-1163

Abdul Hamid, Abdul Rahim and Hisammuddin, Mohd. Izzuddin (2014) Work related stress among contractor management team at construction site. In: National Seminar on Civil Engineering Research SEPKA 2014, 14-15 April, 2014, Skudai, Johor.

Abdul Hamid, Abdul Rahim and Singh, Bachan and Abdullah, Athira (2013) The practices of corporate social responsibility among construction companies in Malaysia. In: The 9th International Conference of Geotechnical & Transportation Engineering (Geotropika) and The 1st International Conference on Construction and Building Engineering (ICONBUILD 2013), 2013.

Abdul Hamid, Abdul Rahim and Singh, Bachan and Arzmi, Azlinda (2014) Construction project manager ways to cope with stress at workplace. In: National Seminar on Civil Engineering Research SEPKA 2014, 14-15 April, 2014, Skudai, Johor.

Abdul Hamid, Abdul Rahim and Singh, Bachan and Mohd. Salleh, Ahmad Suhaimi (2014) Cost of compliance with health and safety management system among contractor in construction industry. In: National Seminar on Civil Engineering Research SEPKA 2014, 14-15 April, 2014, Skudai, Johor.

Abdul Hamid, Abdul Rahim and Wan Yusuf, Wan Zulkifli and Besawa Jagar Singh, Bachan Singh (2003) Hazards at Construction Sites. In: Proceedings of the 5th Asia-Pacific Structural Engineering and Construction Conference , 26-28 August 2003, Johor Bahru, Malaysia.

Abdul Hamid , Atikah (2010) Proposal for the enhancement of JKR matrix organization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Harnid, Abdul Rahim and Singh, Bachan and Wan Yusof, Wan Zulkifli and King, Andrain Tzee Yang (2004) Integration of safety, health, environment and quality (SHEQ) management system in construction : a review. Jurnal Kejuruteraan Awam, 16 (1). pp. 24-37. ISSN 0128-0147

Abdul Hassan, Norhidayah (2013) Microstructural study of reclaimed asphalt specimen preparation using x-ray computed tomography. In: International Conference On Asphalt Materials, 2013.

Abdul Hassan, Norhidayah (2013) Microstructure study of asphalt specimen preparation using X-Ray tomography images. In: International Conference On Advanced Material Research, 2013.

Abdul Hassan, Norhidayah (2013) A review of waste oil application in pavement materials. In: 9th International Conference of Geo-Technical & Transportation Engineering(GEOTROPIKA), 2013.

Abdul Hassan, Norhidayah and Airey, Gordon and Putra Jaya, Ramadhansyah and Mahmud, Mohd. Zul Hanif and Mashros, Nordiana (2015) Use of imaging techniques for viewing the internal structure of rubberised asphalt mixtures. In: Applied Mechanics and Materials, 15-16 Sept, 2015, Kuala Lumpur, Malaysia.

Abdul Hassan, Norhidayah and Hainin, Mohd. Rosli and Mohd. Kamaruddin, Nurul Hidayah and Abdullah, Mohd. Ezree (2014) Rutting evaluation of aged binder containing waste engine oil. Advanced Materials Research, 911 . pp. 405-409. ISSN 1022-6680

Abdul Hassan, Norhidayah and Hainin, Mohd. Rosli and Yaacob, Haryati (2008) Performance of hot mix asphalt using fine crumber. In: Highway Materials and Construction. Penerbit UTM , Johor, pp. 93-106. ISBN 978-983-52-0574-3

Abdul Hassan, Norhidayah and Hainin, Mohd. Rosli and Yaacob, Haryati and Mashros, Nordiana (2008) Performance of hot mix asphalt using fine crumb rubber. Geotechnical & Highway Engineering .

Abdul Hassan, Norhidayah and Mahmud, Mohd Zul Hanif and Ahmad, Kabiru Abdullahi and Hainin, Mohd. Rosli and Putra Jaya, Ramadhansyah and Mashros, Nordiana (2016) Air voids characterisation and permeability of porous asphalt gradations used in different countries. ARPN Journal of Engineering and Applied Sciences, 11 (24). pp. 14043-14047. ISSN 1819-6608

Abdul Hassan, Norhidayah and Mahmud, Mohd. Zul Hanif and Adi, Nurainaa and Rahmat, Noraziela and Hainin, Mohd. Rosli and Putra Jaya, Ramadhansyah (2016) Effects of air voids content on the performance of porous asphalt mixtures. ARPN Journal of Engineering and Applied Sciences, 11 (20). pp. 11884-11887. ISSN 1819-6608

Abdul Hassan, Norhidayah and Mohamed Abdullah, Nor Asniza and Mohd. Shukry, Nurul Athma and Mahmud, Mohd. Zul Hanif and Mohd. Yunus, Nur Zurairahetty and Putrajaya, Ramadhansyah and Hainin, Mohd. Rosli and Yaacob, Haryati (2015) Laboratory evaluation on the effect of clogging on permeability of porous asphalt mixtures. Jurnal Teknologi, 76 (14). pp. 77-84. ISSN 2180-3722

Abdul Hassan, Norhidayah and Samsuri, Nur Shahira and Mohd. Kamaruddin, Nurul Hidayah and Hainin, Mohd. Rosli and Abdullah, Mohd. Ezree and Putra Jaya, Ramadhansyah (2015) Properties of asphalt binder blended with waste engine oil and aged binder. In: International Conference on Green Chemical Engineering Technology, 24-25 Nov, 2015, Melaka, Malaysia.

Abdul Jalil, Nurhafenah and Fisal, Norsheila (2008) Development of a node for wireless image sensor network. In: Development of WSN and Optical Applications. Penerbit UTM , Johor, pp. 16-22. ISBN 978-983-52-0641-2

Abdul Jamal, Nur Syahida and Ab. Halim, Mohd. Hakim and Azmi, Siti Izaidah and Anuar, Aznah Nor and M. Bob, Mustafa and Ujang, Zaini (2014) Characteristics and performance of aerobic granular sludge for domestic wastewater treatment at 30°C. In: National Seminar on Civil Engineering Research (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Abdul Kadir, Abdul Majid and Sin, Sing Tiek and Desa, Ghazali (1994) Analisis Pengukuran GPS Untuk Penubuhan Titik Kawalan Ukur Kadestra. Buletin Ukur, 5 (3). pp. 155-168. ISSN 0128-4274

Abdul Karim (Penterjemah), Khairuddin (1998) Geologi untuk jurutera awam. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0122–6

Abdul Khalil, H. P. S. and Bhat, Irshad Ul Haq and Jawaid, Mohammad and Zaidon, Ashaari and Hermawan, Dede and Hadi, Yusuf Sudo (2012) Bamboo fibre reinforced biocomposites: a review. Materials and Design, 42 . pp. 353-368. ISSN 0261-3069

Abdul Majid, Zakiah and Setan, Halim and Majid, Zulkepli and Chong, Albert K. and Ahmad, Anuar (2005) 3D hardtissue database. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Abdul Malek, Marlinda (2008) Rainfall data in - filling model with expectation maximization and artificial neural network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abdul Malik, Adi Maimun (2013) Observation of the 3D flow around a propeller in confined water. In: The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013), 2013.

Abdul Malik, Ahmad Kamel (2008) Determination of periodic pavement rehabilitation treatment using Pavement Condition Assessment (PCA). In: Highway Materials and Construction. Penerbit UTM , Johor, pp. 37-48. ISBN 978-983-52-0574-3

Abdul Mukti, Mohamad Afifi and Mohd. Noor, Fatimah (2004) Engineering education - the hidden agenda. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Abdul Mulok, Sabri (2011) Flood hazard map for urbanised area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahim, Ajibah (2014) Verification of suitable height data acquisition method for three-dimensional national digital cadastral database. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Rahim, Herlina and Ibrahim, Syahira (2011) Safety system using heart beat monitoring. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 239-251. ISBN 978-967-354-184-3

Abdul Rahim, Mohamad Ashrulnizam (2015) Incentivising knowledge sharing behavior among JKR profesional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahim, Ruzairi (2011) T-safe system. In: Progress in Process Tomography & Instrumentation System: Series 4/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 1-11. ISBN 978-967-354-181-2

Abdul Rahim, Ruzairi and Abdul Waduth, Mohamed Faisal and Jaafar, Haziq Izzuan and Nor Ayob, Nor Muzakkir and Leow, Pei Ling (2012) Current trend of tactile sensor in advanced applications. Sensors & Transducers, 143 (8). pp. 32-43. ISSN 1726-5479

Abdul Rahim, Ruzairi and Pang, Jon Fea and Chan, Kok San and Leong, Lai Chean (2005) Real-time image reconstruction for various flow regimes using an optical tomography sensor in a gravity flow conveyor. Advanced Powder Technology, 16 (4). pp. 399-411. ISSN 0921-8831

Abdul Rahim, Ruzairi and Zakaria, Zulkarnay and Ibrahim, Maliki and Mansor, Muhammad Saiful Badri and Mohd. Muji, Siti Zarina and Nor Ayub, Nor Muzakkir (2012) Dielectric measurement techniques of biological tissue: a review on electrodes perspective. Sensors And Transducers, 137 (2). pp. 245-253. ISSN 1726-5479

Abdul Rahim, Siti Mazlinah (2004) The application of precast concrete technology in industrialised building system (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Azlan and Ahmad, Baderul Hisham and Bakri, Ahmadon and Yong, Chou Yu (2009) Theoretical model for damage and vibration response in concrete bridges. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Abdul Rahman, Alias (1994) ILWIS version 1.3 ....an Interesting and Affordable Tool. Buletin Ukur, 5 (3). pp. 238-241. ISSN 0128-4274

Abdul Rahman, Alias (1996) Spatial Information from Images. Buletin Ukur, 7 (2). ISSN 0128-4274

Abdul Rahman, Alias and Desa, Ghazali and Bull, Luta (1996) Gunapakai Modul NETWORK Arc/Info Untuk Analisis Jaringan. Buletin Ukur, 7 (2). pp. 132-140. ISSN 0128-4274

Abdul Rahman, Alias and Piloux, Marakot (1993) TIN Generation from Digitized Contour Lines. Buletin Ukur, 4 (2). pp. 52-55. ISSN 0128-4274

Abdul Rahman, Alias and Zlatanova, Sisi and Coors, Volker and Gold, Chris (2007) 3D Geo Information System - where are we? In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Abdul Rahman, Alias and Desa, Ghazali (1994) Introduction to Integrated Geo-Information Management. Buletin Ukur, 5 (3). pp. 236-237. ISSN 0128-4274

Abdul Rahman, Azra Ayue and Zainon, Siti Zubaidah (2015) The relationship between self-efficacy and academic performance among engineering students in Universiti Teknologi Malaysia. In: International Conference on Human Resource Development (ICHRD 2015), 5-7 Apr, 2015, Johor Bahru, Johor.

Abdul Rahman, Farahiyah and A. Aziz, Md. Maniruzzaman and Rahman, Saidur and Wan Abu Bakar, Wan Azelee and Hainin, Mohd. Rosli and Ramadhansyah, Putra Jaya and Abdul Hassan, Norhidayah (2017) Pollution to solution: capture and sequestration of carbon dioxide (CO2) and its utilization as a renewable energy source for a sustainable future. Renewable and Sustainable Energy Reviews, 71 . pp. 112-126. ISSN 13640321

Abdul Rahman, Farahiyah (2014) Effect of aggregate gradation on porous asphalt properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Norazmein and Norazmein Abdul Rahman, Norazmein and Safian Sharif , Norazmein and L . H. Tan, Norazmein and P. L. Tan, Norazmein and Izman Sudin, Norazmein (2013) Development of roughness models for sanded durian wood surfaces. In: The 1st International Materials, Industrial and Manufacturing Engineering Conference (MIMEC 2013), 2013.

Abdul Rahman, Norhan (2012) Migration of non-aqueous phase liquids in double-porosity soil: numerical and experimental analysis. In: 2nd International Conference on Water Resources (ICWR 2012), 5-9 Nov 2012, Bayview Hotel, Langkawi, Kedah.

Abdul Rahman, Qotrunnada (2015) Seismic behaviour of low-ductile moment resistance frame under far field earthquake excitations considering soft-storey phenomenon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Roselainy and Ismail, Zaleha and Baharun, Sabariah and Mohammad Yusof, Yudariah (2015) Invoking students thinking in engineering mathematics through informal cooperative learning. In: 8th IMA Conference on Mathematical Education of Engineers, 20 April, 2015, United Kingdom.

Abdul Rahman, Roslan (1996) A study of vibrational power flow in fibre-reinforced plastic material. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Rahman, Sabariah (2009) Effect of temperature on submerged membrane activated sludge reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Siti Fatimah (2012) Development of embedded capacitive sensor for monitoring corrosion of reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Siti Saimah (2015) Performance of bearing capacity for eco-friendly raft pile foundation system (ERP System) in soft soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Alias (2007) Spatial data modelling for 3D GIS. Springer Berlin Heidelberg. ISBN 978-3-540-74166-4 (Print) 978-3-540-74167-1 (Online)

Abdul Rahman, Alias and Hashim, Mohamad Ghazali and Mat Amin, Zulkarnaini and Saad, Mohd.Zahran (1995) Analisis Rupabumi Menggunakan Data Pendigitan Garis Kontur dan GPS. Buletin Ukur, 6 (1). pp. 25-33. ISSN 0128-4274

Abdul Rahman, Alias (1995) How to Lie with Maps. Buletin Ukur, 6 (1). pp. 73-74. ISSN 0128-4274

Abdul Rahman, Alias and Buyong, Taher (1995) NAllS '94 Symposium and Exposition. Buletin Ukur, 6 (1). pp. 69-70. ISSN 0128-4274

Abdul Rahman, Alias and Tan, Lye Siang (1994) Visualization of 2-D and 2.5-D spatial data in arc/info environment. Buletin Ukur, 5 (3). pp. 226-232. ISSN 0128-4274

Abdul Raman, Syazwani (2015) Innovation and research and development in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rashid, Ahmad Safuan and Md. Noor, Norhazilan (2012) Estimation of wall friction of chamber box using consolidation characteristic. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 2137-2141. ISBN 978-303785423-5

Abdul Razak, Noorazlinda (2009) Application of geographic information system in water quality study on a road construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Razak, Zawiyah (2013) Telecommunication towers assessment system in consideration of earthquakes effects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Razak, Zawiyah and Abdullah, Arham and Adnan, Azlan and Bayat, Behzad and Khalil, Zubair (2013) Seismic mapping for telecommunication towers in Malaysia. Malaysian Journal of Civil Engineering, 25 (1). pp. 58-71. ISSN 1823-7843

Abdul Shaib, M. Fadzli and Abdul Rahim, Ruzairi and M. Muji, Siti Zarina and Leow, Pei Ling and Abdul Jamil, M. Mahadi (2012) A study on optical sensors orientation for tomography system development. Sensors And Transducers, 14 (5). pp. 45-52. ISSN 1726-5479

Abdul Shukor, Syaimak (2001) Assessment of CAD to RP translation-unigraphics to quickslice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Shukor Lim, Abdul Haslim (2009) Determination of equilibrium beach profile for a nourished beach with a pressure equalization module (PEM) system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Shukor Lim, Nor Hasanah and Hussin, Mohd. Warid and Sam, Abdulrahman and Samadi, Mostafa and Ismail, Mohamed A. and Ariffin, Nur Farhayu and Abd. Khalid, Nur Hafizah (2015) The effect of oil palm kernel shell in producing different types of POFA based mortar. Jurnal Teknologi, 77 (12). pp. 55-60. ISSN 0127-9696

Abdul Sukor, Nur Sabahiah and Basri, Nur Khairiyah and Hassan, S. A. (2015) Travel behaviour modification technique – A framework for awareness on carbon footprint towards adolescents in developing country. Jurnal Teknologi, 76 (14). pp. 43-48. ISSN 0127-9696

Abdul-Talib, Suhaimi and Ujang, Zaini and Vollertsen, Jes and Hvitved-Jacobsen, Thorkild (2005) Model concept for nitrate and nitrite utilization during anoxic transformation in the bulk water phase of municipal wastewater under sewer conditions. Water Science and Technology, 52 . pp. 181-189. ISSN 02731223

Abdulaziz, Hassan and Johar, Foziah and Majid, Mohammad Rafee and Medugu, Nasiru Idris (2015) Protected area management in Nigeria: a review. Jurnal Teknologi, 77 (15). pp. 31-40. ISSN 0127-9696

Abdullah, K. and Hussin, M. W. and Zakaria, F. and Muhamad, R. and Abdul Hamid, Z. (2006) POFA : a potential partial cement replacement material in aerated concrete. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Abdullah, Khairul Anuar (1995) Height determination using GPS data, local geoid and global geopotential models. In: Seminar Penyelidikan Fakulti Ukur Dan Harta Tanah, UTM, 26 Julai 1995, Hyatt Regency Hotel, Johor Bahru.

Abdullah, Redzuan and Easterling, W. Samuel (2007) Determination of composite slab strength using a new elemental test method. Journal of Structural Engineering, 133 (9). pp. 1268-1277. ISSN 1943-541X

Abdullah, Arham and Saeed, Reza Mohandes and Tabatabaee, Sanaz and Aidin, Nobahar Sadeghifam and Mahdiyar, Amir (2016) Probabilistic private cost-benefit analysis for green roof installation: a Monte Carlo simulation approach. Urban Forestry & Urban Greening, 20 . pp. 317-327. ISSN 1618-8667

Abdullah, Ashraf and Mat Arof, Zakaria and Omar, Abdullah Hisam and Mohd. Abdullah, Nazirah and Chee, Hua Teng and Keat, Lim Chan and Jamil, Hassan (2015) Marine cadastre legal framework for Malaysia. In: WCS-CE - The World Cadastre Summit, Congress & Exhibition, 20-24 April, 2015, Turkey.

Abdullah, Azeana (2009) Performance of modified cold dense graded asphalt mix using oil palm fruit ash (OPFAsh). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Farizul Nizam (2015) Influences of groundwater, rainfall, and tides on beach profiles changes at Desaru beach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Ilias (2015) Soil improvement for taxiway and apron due to soft ground problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Jaharatul Dini Karen Lee (2015) Optimum utilization of quarry dust as partial replacement of sand in green concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Khairul Anuar and Musa, Tajul A. (1995) Penentudukan Titik dan Ketinggian Ortometrik Menggunakan Data GPS: Integrasi Perisian GPPS dan L3D-HEIGHT. Buletin Ukur, 6 (2). pp. 125-133. ISSN 0128-4274

Abdullah, Khairunisa and Hussin, Mohd. Warid (2010) Fire resistance properties of palm oil fuel ash cement based aerated concrete. Concrete Research Letters, 1 (3). pp. 107-114. ISSN 2180-1371

Abdullah, M. E. and Hainin, M. R. and Yusoff, N. I. Md. and Zamhari, K. A. and Hassan, N. (2016) Laboratory evaluation on the characteristics and pollutant emissions of nanoclay and chemical warm mix asphalt modified binders. Construction and Building Materials, 113 . pp. 488-497. ISSN 0950-0618

Abdullah, M. E. and Zamhari, K. A. and Shamshudin, M. K. and Hainin, M. R. and Satar, M. K. I. M. (2013) Rheological properties of asphalt binder modified with chemical warm asphalt additive. In: Advanced Materials Research.

Abdullah, Mohd. Ezree and Zamhari, Kemas Ahmad and Buhari, Rosnawati and Abu Bakar, Siti Khatijah and Mohd. Kamaruddin, Nurul Hidayah and Nayan, Nafarizal and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Hassan, Sitti Asmah and Md. Yusoff, Nur Izzi (2014) Warm mix asphalt technology: a review. Jurnal Teknologi, 71 (3). pp. 39-52. ISSN 0127-9696

Abdullah, Mohd. Ezree and Zamhari, Kemas Ahmad and Buhari, Rosnawati and Mohd. Kamaruddin, Nurul Hidayah and Nayan, Nafarizal and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Putra Jaya, Ramadhansyah and Md. Yusoff, Nur Izzi (2015) A review on the exploration of nanomaterials application in pavement engineering. Jurnal Teknologi, 73 (4). pp. 69-76. ISSN 1279-0696

Abdullah, Mohd. Yunus (1996) Vibrations and stress analysis of piping system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, N. and Fulazzaky, M. A. and Yong, E. L. and Yuzir, A. and Sallis, P. (2016) Assessing the treatment of acetaminophen-contaminated brewery wastewater by an anaerobic packed-bed reactor. Journal of Environmental Management, 168 . pp. 273-279.

Abdullah, Redzuan (2013) Parametric study of concrete load bearing wall with opening for double storey houses. In: The International Graduate Conference on Engineering, Science and Humanities (IGCEISH2013), 2013, Universiti Teknologi Malaysia (UTM), Johor, Malaysia.

Abdullah, Redzuan and Easterling, W. S. (2011) Elemental bending test and modeling of shear bond in composite slabs. In: Composite Construction in Steel and Concrete VI - Proceedings of the 2008 Composite Construction in Steel and Concrete Conference. American Society of Civil Engineers, Virginia, USA, pp. 138-150. ISBN 978-078441142-1

Abdullah, Redzuan and Easterling, W. Samuel (2009) New evaluation and modeling procedure for horizontal shear bond in composite slabs. Journal of Constructional Steel Research, 65 (4). pp. 891-899.

Abdullah, Redzuan and Poton-Cole, Vidal P. and Samuelm Easterling, W. (2007) Quasi-static analysis of composite slab. Malaysian Journal of Civil Engineering, 19 (2). pp. 91-103. ISSN 1823-7843

Abdullah, Rini Asnida and Mohd. Amin, Mohd. For and A. Rashid, Ahmad Safuan (2013) Discrete element modelling in rock slope stability analysis. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

Abdullah, Rini Asnida and Rosie, Qalam Azad and Mohammed Al-Bared, Mohammed Ali and Haron, Nor Hazwani and Tajuddin, Mohamad Nor and Kamal, Shamsul and Mohamad Hazizi, Mohamad Hazizi and Ghazali, Qisti (2015) Stability assessment of rock slope at Pangsapuri Intan, Cheras. In: International Conference on Slopes, Malaysia 2015, 14-16 Sep, 2015, Kuala Lumpur, Malaysia.

Abdullah @ Muthusamy, Khairunisa (2003) Pembaziran bahan di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Ismail, Shawnm (2014) Synthesis of the anti-oxidant eugenol benzoate using Candida rugosa lipase immobilized onto multi walled carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah Thawaba, Bakeel Hassan (2007) Safety in pre-cast construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Khairul Anuar (1997) Improving Geoidal Height Estimates from Global Geopotential Model Using Regression Model and GPS Data. Buletin Geoinformasi, 1 (3). pp. 112-118. ISSN 1394-7702

Abdullah, Khairul Anuar (1995) Improving The Heights Derived From Geoid Models Using A Regression Model. Buletin Ukur, 6 (1). pp. 15-24. ISSN 0128-4274

Abdullah, Khairul Anuar (1994) Taking the Spirit Out of Levelling. Buletin Ukur, 5 (3). pp. 185-195. ISSN 0128-4274

Abdullah, Khairul Anuar (1995) The 1st. Turkish International Symposium on Deformations. Buletin Ukur, 6 (1). pp. 71-72. ISSN 0128-4274

Abdullah, Khairul Anuar (1994) Unsur-unsur matematik untuk jurukur tanah. Documentation. Fakulti Kejuruteraan & Sains Geoinformasi, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

Abdullah, Khairul Anuar and Din , Usmuni and Phan, Nyuk Fah (1998) Penghasilan Isipadu Korekan Dan Pelan Batimetri Menggunakan Perisian Volcomp. Buletin Geoinformasi, 2 (1). pp. 194-200. ISSN 1394-7702

Abdullah, Khairul Anuar and Idris, Abdul Wahid (1994) Geodesi geometrik. Documentation. Fakulti Kejuruteraan & Sains Geoinformasi, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

Abdullah, Redzuan and Abd. Hamid, Hazlan (2006) An investigation on the feasibility of the use of dry floor system for low cost construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdullahi, Mu'azu M. and Ali, Nazri and Ahmed, Kamarudin B. (2010) Bioengineering assessment on sloppy ground. American Journal of Environmental Sciences, 6 (4). pp. 357-364. ISSN 1553-345X

Abdulrahman, A. S. and Ismail, Mohammad and Hussain, Mohammad Sakhawat (2011) Inhibition of corrosion of mild steel in hydrochloric acid by bambusa arundinacea. International Review of Mechanical Engineering (IREME), 5 (1). pp. 59-63. ISSN 1970-8734

Abdulrazaq, Salaudeen (2016) Streamflow prediction in ungauged river basin using gene expression programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulrazaq, Salaudeen and Ismail, Tarmizi and Heryansyah, Arien and Umar, Faruk Lawan and Sahar, Hadi Pour and Md., Mahiuddin Alamgir (2016) Streamflow prediction in ungauged catchments in the east coast of peninsular Malaysia using multivariate statistical techniques. Jurnal Teknologi, 78 (6-12). pp. 43-49. ISSN 0127-9696

Abdurrahman, Usman Tasiu and Che Puan, Othman and Ibrahim, Muttaka Na’iya (2014) Comparison of free flow speed estimation models. In: National Seminar On Civil Engineering Research (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Abed Shakir, Ali (2014) The effect of aging treatment on the microstructure and thermodynamic parameters of CuA1Ni-Mn shape memory alloys (SMAs). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abideen , Muzaffar Zainal (2013) Improving the coagulation process in drinking water treatment using response surface method jar test. In: International Conference on Innovation Challenges in Multidisciplinary Research & Practice 2013.

Abidin, Mastura Shafiz Zail and Hashim, A. M. and Sharifabad, M. E. and Abd. Rahman, S. F. and Sadoh, T. (2011) Open-gated PH sensor fabricated on an undoped-algan/gan hemt structure. Sensors, 11 . pp. 3067-3077. ISSN 1424-8220

Abidin, Nur Izieadiana and Zakaria, Rozana and Mohd. Pauzi, Nurul Noraziemah and Al Qaifi, Gamal Nabil and Sahamir, Shaza Rina and Shamsuddin, Siti Mazzuana (2016) Energy efficiency initiatives in a campus building. In: 2nd International Conference of Low Carbon Asia (ICLCA2016), 23-25 Nov, 2016, Kuala Lumpur, Malaysia.

Abo Sabah, Saddam Hussein Ali (2013) Finite element modeling of laminated composite plates with locally delaminated interface subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abolghasemi, Maryam and Ghafourian, Kambiz and Ismail, Syuhaida and Ali, Asghar Bavafa and Mohamed, Zainai (2017) Sustainable construction and demolition waste management in Malaysia: current issues. Jurnal Kemanusiaan, 26 (1). pp. 21-31. ISSN 1675-1930

Abu, Aminudin and Oh, Jae-Eung and Lee, Jung Youn (2008) A characteristic of crankshaft behavior at the initial firing stage. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 18-41. ISBN 978-983-52-0563-7

Abu, Samad and A. Kadir, Abd. Majid and Ses, Shahrum (1997) Preliminary Analysis of Precise Levelling Network for The Southern Peninsular Malaysia. Buletin Geoinformasi, 1 (1). ISSN 1394-7702

Abu, Samad (2002) Determination of Malaysian geodetic GPS network in the ITRF2000. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Bakar, Suhaimi and Saleh, Abd Latif and Mohamed, Zainai (2004) Factors affecting ultimate strength of solid and glulam timber beams. Jurnal Kejuruteraan Awam, 16 (1). pp. 38-47. ISSN 0128-0147

Abu Bakar, Amyrhul (2013) Hydrodynamic modeling of Malacca Straits using EFDC. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Azinoor Azida and Baki, Aminuddin and Atan, Ismail and Ali, Fozi and Yusop, Zulkifli and Khalil, Muhammad Khairudin (2012) Annual interception loss estimation with a simple equation. In: SHUSER 2012 - 2012 IEEE Symposium on Humanities, Science and Engineering Research. IEEE, New York, USA, pp. 1477-1482. ISBN 978-146731310-0

Abu Bakar, Aznizam and Abdul Ghani, Siti Waqina and Kee, Wee Cheng (2012) Flexural and impact properties of poly (vinyl chloride) and acrylic-impact modified poly (vinyl chloride) composite filled with poly (methyl methacrylate) grafted to oil palm empty fruit bunches. International Journal Of Polymeric Materials, 61 . pp. 263-275. ISSN 0091-4037

Abu Bakar, Hazri (2007) Assessment of reinforced concrete beam subjected to fire. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Rabieahtul and Mohamad Lehan, Nur Fadzlina Aini and Razak, Khamarrul Azahari (2014) Space technology in the Royal Belum: bridging the tranquility for future geo-sustainability. In: National Conference on Royal Belum 2014, 9-10 Dec, 2014, Perak, Malaysia.

Abu Bakar, Suhaimi (1996) A study of stress distribution in orthotropic beam by boundary element technique. Jurnal Kejuruteraan Awam, 9 (2). pp. 14-24. ISSN 0128-0147

Abu Bakar, Suhaimi and Gan, Chiew Leng (2008) Behaviour prediction of glued laminated timber beam made of different hardwood laminations using transformed section. In: Mechanical Properties And Bending Strength Theory For Malaysian Structural Timber. Penerbit UTM , Johor, pp. 83-93. ISBN 978-983-52-0567-5

Abu Bakar, Suhaimi and Mohamed, Zainai and Saleh, Abd. Latif (2008) Idealization of structural timber as a perfectly elasto-plastic material. In: Mechanical Properties and Bending Strength Theory for Malaysian Structural Timber. Penerbit UTM , Johor, pp. 24-35. ISBN 978-983-52-0567-5

Abu Bakar, Suhaimi and Mohamed, Zainai and Saleh, Abd. Latif (2008) An improved strain incremental formulation in boundary element method applied to a timber beam at the moment of failure. In: Mechanical Properties And Bending Strength Theory For Malaysian Structural Timber. Penerbit UTM , Johor, pp. 107-119. ISBN 978-983-52-0567-5

Abu Bakar, Suhaimi and Saleh, Abd. Latif (2008) Verification of weibull's theory of brittle fracture for local timber loaded in tension parallel to grain. In: Mechanical Properties And Bending Strength Theory For Malaysian Structural Timber. Penerbit UTM, Johor, pp. 1-10. ISBN 978-983-52-0567-5

Abu Bakar, Suhaimi and Saleh, Abd. Latif and Mohamed, Zainai (2008) An improvement of tresca’s yield criterion for the analysis of timber structure. In: Mechanical Properties And Bending Strength Theory For Malaysian Structural Timber. Penerbit UTM , Johor, pp. 94-106. ISBN 978-983-52-0567-5

Abu Bakar, Akrima (2010) Indirect tension test of hot mix asphalt as related to temperature changes and binder types. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Abu Bakar @ Md. Ramli, Suhaimi (1994) Analisis tegasan menggunakan kaedah unsur sempadan bagi rasuk kayu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar @ Md. Ramli, Suhaimi (2002) Ramalan kekuatan muktamad bagi rasuk kayu padu dan rasuk glulam : penggunaan teori elastik-plastik. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Suhaimi and Saleh, Abd Latif (2005) Verification of weibull's theory of brittle fracture to meranti's timber loaded in tension parallel to the grain. Jurnal Teknologi B (43B). pp. 27-34. ISSN 0127-9696

Abu Hassan, Mohd. Ariffin and Puteh, Mohd. Hafiz (2007) Pre-treatment of palm oil mill effluent (POME) : a comparison study using chitisan and alum. Malaysian Journal of Civil Engineering, 19 (2). pp. 128-141. ISSN 1823-7843

Abu Hassan, Suhaimi and Saleh, Abd. Latif and Mohamed, Zainai (2003) Ultimate load prediction for timber beam - elasto-plastic theory approach. In: Proceedings of the 5th Asia-Pacific Structural Engineering and Construction Conference , 26-28 August 2003, Johor Bahru, Malaysia.

Abu Hujair, Taysir Salim Salman (1998) Efficiency analysis of operational performance of Johor Port container terminal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Najafian, G. (2013) Comparison of extreme responses from wheeler and vertical stretching methods. In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, 9-14 Jun 2013, Nantes, France.

Abu Kassim, Naseem Asllah (2009) Impacts of landuse to water quality, mangrove forest and seagrass meadow at Sungai Pulai estuary. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Samah , Rosiah (2010) Proposal for evaluation methodology of competency based project management training. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Talib, Zaihasra and Kassim, Azman and Yunusa, Gambo Haruna (2015) Influence of relict joints on permeability of residual soil. In: Soft Soil Engineering International Conference 2015 (SEIC 2015), 27-29 Oct, 2015, Langkawi, Malaysia.

Abu. Samaan, Noor Fazura (2015) Land acquisition issues for Jabatan Kerja Raya's road work project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abubakar, Mu'Azu and Tamin, Mohd. Nasir and Ahmad, Norhayati (2015) A three parameter weibull of flexural strength variation of porous sintered clay. In: World Scientific and Engineering Academy and Society Conference, 27-29 June, 2015, Italy.

Achara , Bitrus Emmanuel (2010) Behavior of lightweight concrete containing palm oil shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adam, Mohamad Zulkefli (1999) Motion detection in stereoscopic vision system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Adamu, Musa (2014) The use of scrap tyre as fine and coarse aggregate in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adham, Md. Ibrahim and Shirazi, Sharif Moniruzzaman and Othman, Faridah and Yusop, Zulkifli and Hassan, Noorul (2015) Soil erodibility and surface runoff potentiality for water pollution management of Melaka Tengah watersheds in Malaysia. In: The 2nd IWA Malaysia Young Water Professionals Conference, 17-20 Mac, 2015, Kuala Lumpur, Malaysia.

Adham, Md. Ibrahim and Shirazi, Sharif Moniruzzaman and Othman, Faridah A. and Zardari, Noorul Hassan and Yusop, Zulkifli and Ismail, Zubaidah (2015) Soil erodibility for water pollution management of Melaka watershed in Peninsular Malaysia. EnvironmentAsia, 8 (2). pp. 63-69. ISSN 1906-1714

Adn, A. and Tiong, P. L. Y. and Suryat, J. and Ghazali, M. Z. M. and Malek, K. A. (2011) Seismic base isolation of steel frame structure by hollow rubber bearings. Gazi University Journal of Science, 24 (4). pp. 841-853. ISSN 1303-9709

Adnan, Azlan and Hendriyawan, Hendriyawan and Masyhur Irsyam, Masyhur Irsyam (2002) The effect of the latest Sumatra earthquake to Malaysian Peninsular. Jurnal Kejuruteraan Awam, 14 (2). pp. 12-25. ISSN 0128-0147 (Submitted)

Adnan, Robiah and Mohamad, Mohd Nor and Setan, Halim (2003) Multiple outliers detection procedures in linear regression. Matematika, 19 (1). pp. 29-45. ISSN 0127-8274

Adnan, Azlan (2012) Dominate frequency tailing embankment interface to bridge by 3D finite element method. In: Conference.

Adnan, Azlan (2013) Dynamic soil-pile interaction under earthquake events. In: AWAM International Conference on Civil Engineering & Geohazard Information Zonation, 28-30 Aug 2012, Batu Ferringhi, Penang.

Adnan, Azlan and Abd. Rahman, Ahmad Baharuddin and Vafaei, Mohammad Reza (2014) Seismic performance evaluation of an airport traffic control tower through linear and nonlinear analysis. Structure and Infrastructure Engineering, 10 (8). pp. 963-975. ISSN 1744-8980

Adnan, Azlan and Baharudin, Noor Hasnida and Kasa, Anuar and Chik, Zamri and Taha , Mohd. Raihan (2011) Preparation of residual soil samples by using modified method. In: Advanced Materials Research. Elsevier, Guangzhou, pp. 4470-4473. ISBN 978-087849206-0

Adnan, Azlan and Hendriyawan, Hendriyawan and Marto, Aminaton and Irsyam, Masyhur (2006) Development of synthetic time histories at bedrock for Kuala Lumpur. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Adnan, Azlan and Hendriyawan, Hendriyawan and Selvanayagam, B. and Marto, Aminaton (2008) Development of seismic hazard maps of East Malaysia. In: Advances in Earthquake Engineering Application. Penerbit UTM , Johor, pp. 1-18. ISBN 978-983-52-0571-2

Adnan, Azlan and Ismail, Rozaina (2008) Database system and digital earthquake evaluation of buildings. In: Advances in Earthquake Engineering Application. Penerbit UTM , Johor, pp. 127-144. ISBN 978-983-52-0571-2

Adnan, Azlan and Suhatril, Meldi and M. Taib, Ismail (2010) The mechanical properties of high strength concrete for box girder bridge deck in Malaysia. Concrete Research Letters, 1 (1). pp. 35-44. ISSN 2180-1371

Adnan, Azlan and Sunaryati, Jati (2006) Mechanical characteristics of circular elastomeric hollow rubber bearing. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Adnan, Azlan and Suradi, Suhana and Selvanayagam, P. N. and Darus, Zamri (2006) Vulnerability of public buildings subjected to earthquake by finite element modelling. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Adnan, Azlan and Tiong, P. L. Y and Rahman, A. B. A (2012) Ductility factor of RC building frames with different infill wall configurations under low intensity far field earthquake effects. In: Conference.

Adnan, Azlan and Vafaei, Mohammadreza and Yadollahi, Mohammadreza (2011) Seismic damage detection using pushover analysis. In: Advanced Materials Research. Trans Tech Publications, Kunming, pp. 2496-2499. ISBN 978-303785139-5

Adnan, Norliyana (2009) Effects of landuse changes to water quality and green mussels (Perna viridis) due to development along Danga-Pendas coastal area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Robiah and Setan, Halim and Mohammad, Mohd. Nor (2001) Identifying multiple outliers in linear regression : Robust fit and clustering approach. In: The 10th FIG International Symposium on Deformation Measurements, 19 - 22 March 2001, Orange,,California,USA.

Adnan, Suraya Hani (2002) Pemantapan cerun menggunakan geotekstil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Azlan and Mohd. Ghazali, Mohd. Zulkifli (1999) Concrete-steel composite action performance in steel girder bridges under earthquake loading. In: Our World of in Concrete and Structure, 1999, Singapore.

Affam, A. C. and Chaudhuri, M. and Kutty, S. R. M. and Muda, K. (2016) Degradation of chlorpyrifos, cypermethrin and chlorothalonil pesticides in aqueous solution by FeGAC/H2O2 process. Desalination and Water Treatment, 57 (11). pp. 5146-5154. ISSN 1944-3994

Affam, Augustine Chioma and Chaudhuri, Malay and Mohamed Kutty, Shamsul Rahman and Muda, Khalida (2016) Combination of FeGAC/H2O2 advanced oxidation process and sequencing batch reactor for treatment pesticide wastewater. Environmental Earth Sciences, 75 (4). pp. 1-9. ISSN 1866-6280

Affam, Augustine Chioma and Chaudhuri, Malay and Mohamed Kutty, Shamsul Rahman and Muda, Khalida (2014) UV Fenton and sequencing batch reactor treatment of chlorpyrifos, cypermethrin and chlorothalonil pesticide wastewater. International Biodeterioration and Biodegradation, 93 . pp. 195-201. ISSN 0964-8305

Afrooz, Iman Eslami and Ochsner, Andreas and Rahmandoust, Moones (2012) Effects of the carbon nanotube distribution on the macroscopic stiffness. Computational Materials Science, 51 (1). pp. 422-429. ISSN 0927-0256

Aghlara, Reza (2010) Application of 2-dimensional digital image correlation for mapping bond strain and stress distribution in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahamad, Abdul Hadi (2015) Strategies to enhance application of SIRIM eco-label products in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Kamarudin and Aris, Azmi (2009) Migration characteristics of metal contaminants through a peat soil. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ahmad, Kamarudin and Kassim, Khairul Anuar and Taha, Mohd. Raihan (2006) Electroosmotic flows and electromigrations during electrokonetic processing of tropical residual soil. Malaysian Journal of Civil Engineering, 18 (2). pp. 74-88. ISSN 1823-7843

Ahmad, Robiah and Jamaluddin , Hishamuddin and Hussain, Mohd. Azlan (2004) Model structure selection for a discrete-time non-linear system using genetic algorithm. Proc. Instn Mech. Engrs, J. Systems and Control Engineering, 218 (12). pp. 85-98.

Ahmad, Afham Zulhusmi (2013) Utilizing silica fume for development of concrete strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Anees (2011) Influence of staffing practices on effective project management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Anuar (2004) Architectural photogrammetry for conservation and restoration of historical building : an experience with MPS-2 system. Buletin Ukur, 5 (3). pp. 216-225. ISSN 0128-4274

Ahmad, Anuar (1990) Remote 3-Dimensional Measurement System by Theodolite Intersection. Buletin Ukur (1). pp. 12-27.

Ahmad, Anuar and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2006) Appropriate type of digital camera for craniofacial data acquisition system. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Ahmad, Anuar and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2004) Calibration of digital camera for medical photogrammetry. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Ahmad, Anuar and Yaakub, Ibrahim and Md. Som, Zainal Abidin (1995) Kajian penggunaan kaedah fotogrametri terrestrial dalam pengawasan Empangan Klang Gate. In: Seminar Penyelidikan Fakulti Ukur Dan Harta Tanah, UTM (1995), 26 Julai 1995, Hyatt Regency Hotel, Johor Bahru.

Ahmad, Baharin and Ab. Khadir, Mohd. Nasir (1997) Automasi dalam ukur topografi. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Ahmad, Dzulkarnain and Mohd. Yassin, Airil Yasreen and Kueh, Ahmad Beng Hong (2012) Element free galerkin formulation of composite beams with longitudinal and transverse partial interactions. In: 2nd International Conference on Civil Engineering, Architecture and Building Materials. Trans Tech Publications, Switzerland, pp. 3237-3240. ISBN 978-303785421-1

Ahmad, Dzulkarnain (2002) Kajian sistem kerangka keluli dan teras konkrit bertetulang bangunan tinggi : analisis unsur terhingga tidak lelurus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Fauzan and Raja Rosdin, Raja Zaimas and Mohamad Ali, Norfizah and Arof, Hamzah and Harun, Sulaiman Wadi B. (2014) Q-switched Er-doped fiber laser with low pumping threshold using graphene saturable absorber. Chinese Optics Letters, 12 (9). ISSN 1671-7694

Ahmad, Hazrina (2004) The creep behaviour of high strength concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Juraidah and Abdul Rahman, Mohd. Yusof and Hosasain, Mustaque and Hainin, Mohd. Rosli (2008) Evaluation of Malaysian asphaltic concrete mixture using superpave and marshall mix design method. In: Highway Materials and Construction. Penerbit UTM , Johor, pp. 49-62. ISBN 978-983-52-0574-3

Ahmad, Kamaruddin and Kassim, Khairul Anuar and Taha, Mohd. Raihan (2008) Geotechnical behaviour of electronically treated residual soils. In: Ground Improvement & Stabilization. Penerbit UTM , Johor, pp. 71-88. ISBN 978-983-52-0573-6

Ahmad, Kamarudin and Kassim, Khairul Anuar and Taha, Mohd. Raihan (2005) Influence of electrokinetic processing of a tropical soil on the PHs of the electrolytes. Jurnal Kejuruteraan Awam, 17 (1). pp. 39-48. ISSN 0128-0147

Ahmad, Muhammad Fiaz (2008) Horizontal shear stress contour mapping of composite slab by photostress method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Nor Farah Atiqah (2012) Field evaluation of infiltration models under oil palm plantation with reference to stemflow & througfall areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Samsudin (1999) Penilaian keupayaan data stereo spot untuk menerbitkan maklumat rupabumi dan pra-pemprosesan & kalibrasi radiometri data radar bukaan sintetik satelit ers-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad, Siti Thalisah (2007) Design optimization of curve profile retaining wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Yusof (2001) Mekanik bahan dan struktur. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0239-7

Ahmad, Yusof (1998) Mekanik dinamik. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0112–9

Ahmad, Yusof (1999) Mekanik statik. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0057–2

Ahmad, Yusof (2004) Teori struktur. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0326–1

Ahmad, Yusof and Hussin, Mohd. Warid and Ali, Shettima Umara (2015) Influence of high temperature on strength and microstructure properties of concrete containing iron ore tailings. In: 9th Asia Pacific Structural Engineering & Construction Conference (APSEC 2015) and 8th Asean Civil Engineering Conference (ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Ahmad, Yusof (2011) Ductility of timber beams strengthened using glass fiber reinforced polymer bars. In: The 3rd International Conference Of European Asian Civil Engineering Forum (Eacef).

Ahmad, Z. and Thambiratnam, D. (2009) Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading. Computers & Structures, 87 (3-4). pp. 186-197. ISSN 00457949

Ahmad , Yusof (2013) Determination of poisson's ratio for local timber. In: n/a, 2013.

Ahmad Fauzi, Muhammad Nazirul (2015) Inventory for knowledge management in construction organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Kailani, Nor Hafizah (2014) The application of finite element method in 2d heat distribution problems for irregular geometry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Lutpi, Nur Anis and Muhammad Yuzir, Muhamad Ali and Yong, Eeling and Salim, Mohd. Razman and Yusop, Zulkifli and Salmiati, Salmiati (2015) The effect of water quality on removal of acetaminophen in surface water by ozonation process. Jurnal Teknologi, 74 (11). pp. 1-7. ISSN 0127-9696

Ahmad Mustafa, Ahmad Mudzakkir and Zamzuri, Hairi and Mohammed Ariff, Mohd. Hatta and Mohamad Nordin, Muhammad Afandi and Mazlan, Saiful Amri (2015) Wheel slip control based on composite nonlinear feedback. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7753-7758. ISSN 1819-6608

Ahmad Nasruddin, Mohd. Hasif and Abdul Rahman, Alias (2007) Registration of 3D Spatial Objects for 3D Cadastre. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Ahmad Nizar, Nurul Kharmila (2014) Dust reduction in an electronic industry through TRIZ methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Puzi, Marliana Azura (2002) Kajian kerosakan jalan kampung berturap di Batu Pahat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Rodzuan, Nor Sarwani (2010) Kesan teknik peredaan lalu lintas terhadap pengurangan laju kenderaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Salleh, Mazlina (2015) Risk management procedures for physical development projects in the Ministry of Education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Shah, Fathihah (2015) Passive design approach towards energy efficient building envelope for individual residential. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Shakri, Md Rajuna and Mohd Said, Mohd Ismid and Zakaria, Rozana and Munikanan, Vikneswaran (2011) Sustainable neighbourhood elements model (SNES model). In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Ahmad Sharmi Abdullah, (2013) Vinyl-silica-titania material derived through sol-gel for optical waveguide device. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Tajudin, Saiful Azhar and Marto, Aminaton and Mohammad Azmi, Mohamad Azim and Madun, Aziman and Zainal Abidin, Mohd. Hazreek (2015) Utilization of sugarcane BagAsse ash for stabilization/solidification of lead-contaminated soils. Jurnal Teknologi, 77 (11). pp. 119-125. ISSN 0127-9696

Ahmad Tarmuzi, Nadhir (2013) The effect of aggregate’s angularity on engineering properties and performance of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Zahidi, Mohd. Hafiz (2010) Kajian olahan air larut lesap menggunakan tumbuhan sensevieria trifasciat a di dalam sistem tanah bencah buatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Zaini, Ashraf (2016) Evaluation of crack relief layer for airport runways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Zubir, Meor Mohd. Fikri (2015) Biodegradation and metabolic pathway of cresol red dye by selected fungi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Anuar (1995) Sistem-Sistem Fotogrametri Kos Rendah: Satu Perbandingan. Buletin Ukur, 6 (2). pp. 134-142. ISSN 0128-4274

Ahmad, Anuar and Yaakub, Ibrahim (1996) Architectural Photogrammetry in Malaysia: An Experience. Buletin Ukur, 7 (2). pp. 100-109. ISSN 0128-4274

Ahmad, Baharin (2007) Assessment and correction SRTM DEM with reference to geo-hazard identification in the Cameron Highlands, Malaysia. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Ahmad, Baharin (1999) EDM pengukuran jarak elektronik. Documentation. Faculty of Geoinformation Science & Engineering, Universiti Teknologi Malaysia.

Ahmad, Baharin (2001) Ukur kejuruteraan 1. Documentation. Faculty of Geoinformation Science & Engineering, Universiti Teknologi Malaysia.

Ahmad, Baharin (2001) Ukur kejuruteraan 3 (Automasi Ukur). Documentation. Faculty of Geoinformation Science & Engineering, Universiti Teknologi Malaysia.

Ahmadi, Mohammad (2015) Evaluation of multistory buildings using performance-based seismic in life safety level. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmadi, Mohammad and Abu Bakar, Suhaimi (2014) Assessment of structural performance by using different beam size through PBSD method. In: International Graduate Conference on Engineering, Science and Humanities 2014 (IGCESH2014), 19-21 August, 2014, Skudai, Johor. (In Press)

Ahmadi, Mohammad and Abu Bakar, Suhaimi (2014) Shear wall effect on material consumption based on seismic design. Gradevinar, 66 (1). pp. 1-9. ISSN 0350-2465

Ahmadi, Mohammad and Abu Bakar, Suhaimi (2015) A simple algorithm to assess structural performance by PBSD method. In: Applied Mechanics and Materials, 1 Jan-3 Feb, 2015, Switzerland.

Ahmadnia, Behzad (2010) Apartments ownership and maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmat Nor, Nor Irwan (2005) Rainfall - runoff modeling using artificial neural network method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Ahmed, Adeb Qaid and Ossen, Dilshan Remaz and Jamei, Elmira and Abd. Manaf, Norhashima and Said, Ismail and Ahmad, Mohd. Hamdan (2015) Urban surface temperature behaviour and heat island effect in a tropical planned city. Theoretical and Applied Climatology . pp. 1-22. ISSN 0177-798X

Ahmed, Ishtiaque and Sithey, Gyambo (2013) Pedestrian day experience in Thimphu, Bhutan. Transport and Communications Bulletin for Asia and the Pacific, 82 (n/a). pp. 61-71. ISSN 0252-4392

Ahmed, Ishtiaque (2013) A comparative review of preliminary police crash report forms of selected agencies. In: Road Safety International Conference, 2013.

Ahmed, Kamal and Shahid, Shamsudin and Harun, Sobri (2014) Spatial interpolation of climatic variables in a predominantly arid region with complex topography. Environment Systems and Decisions, 34 (4). pp. 555-563. ISSN 2194-5403

Ahmed, Mohammed Taher and Zakaria, Rozana and Mohamad Zin, Rosli and Hussien Ahmed, Rania (2014) Sustainability indicators for concrete formwork system. Applied Mechanics and Materials, 525 (2014). pp. 504-508. ISSN 1660-9336

Ahmed Abuassal, Ali Mohamed (2012) Flow regime identification of particles conveying in pneumatic pipeline using electric charge tomography and neural network techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Bamaga, Saleh Omar (2013) Structural behaviour of composite beams with cold formed steel section. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Memon, Zubair and Abd. Majid, Muhd Zaimi and Mustaffar, Mushairry (2006) The use of photogrammetry techniques to evaluate the construction project progress. Jurnal Teknologi B (44B). pp. 1-15. ISSN 0127-9696

Ahmed Nasroulla, Nazaneen (2014) Relationship between cone penetration test and undrained shear strength of soft soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Nasroulla, Nazaneen and A. Rashid, Ahmad Safuan and Kalatehjari, Roohollah and Kassim, Khairul Anuar and Md. Noor, Norhazilan and Horpibulsuk, Suksun (2016) Determination of liquid limit of a low swelling clay using different cone angles. Applied Clay Science, 132 . pp. 748-752. ISSN 0169-1317

Ahmed Shourav, Md. Sabbir and Mohsenipour, Morteza and Alamgir, Mahiuddin and Pour, Sahar Hadi and Ismail, Tarmizi (2016) Historical trends and future projection of climate at Dhaka city of Bangladesh. Jurnal Teknologi, 78 (6-12). pp. 69-75. ISSN 0127-9696

Ahzahar, Nadira (2005) Kaedah pengurusan kecacatan dan kegagalan struktur bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Akasah, Z. A. and Amirudin, Roslan and Alias, M. (2010) Maintenance management process model for school buildings: an application of IDEF0 modelling methodology. Australian Journal of Civil Engineering, 8 (1). pp. 1-12. ISSN 1448-8353

Akbar, Ibrisam (2001) Finite element analysis of standard T-section bridge prestressed concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Akinyode, Babatunde Femi and Tareef, Hayat Khan (2016) Influence of estate agents and building plan approval cost on housing affordability in developing cities. OSR Journal of Humanities and Social Science (IOSR-JHSS), 21 (9). pp. 47-55. ISSN 2279-0837

Al Abadi, Alaa M. Atiaa and Shahid, Shamsuddin (2015) A comparison between index of entropy and catastrophe theory methods for mapping groundwater potential in an arid region. Environmental Monitoring and Assessment, 187 (9). pp. 1-21. ISSN 0167-6369

Al Amri, Abdullah Ali (2010) The performance of membrane bioreactor in treating high temperature municipal wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Al Hassan, Altoum Alagab Al Amin (2008) The behavior of reinforce concrete beam with construction joint near the support. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al Qaifi, Gamal Nabil Ali and Zakaria, Rozana and Khalid, Sukeri Mohamad (2016) Association and influence of risk criteria to decision making of green building investment in higher educational campuses. In: International Symposium on Sustainable Development and Management (ISSDM) 2016, 08-09 Oct, 2016, Kuala Lumpur, Malaysia.

Al-Attabi, Ali Mohammed Ali Naji (2014) Life cycle costing of industrialized building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al-Khafaji, Hamza M. R. and Ngah, Razali and Aljunid, Syed Alwee and Abd Rahman, Tharek (2015) A new two-code keying scheme for SAC-OCDMA systems enabling bipolar encoding. Journal of Modern Optics, 62 (5). pp. 327-335. ISSN 0950-0340

Al-Obeidy, Musaab Sami and Shamsuddin, Shuhana (2014) The role of functional characteristics of commercial streets ininfluencing sense of place in Mosul City Centre. In: 2nd International Science Postgraduate Conference 2014, 10-12 Mac, 2014, Skudai, Johor.

Al-Shakarji, Khalid Ismail (1998) Modern and innovative structures : finite element modelling of special shaped structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alamgir, Mahiuddin and Pour, Sahar Hadi and Mohsenipour, Morteza and Hasan, M. Mehedi and Ismail, Tarmizi (2016) Predictors and their domain for statistical downscaling of climate in Bangladesh. Jurnal Teknologi, 78 (6-12). pp. 51-56. ISSN 0127-9696

Alashwal, Mohammed Taher (2008) Safety cost in pre-cast concrete construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Alashwal, Ali Mohammed (2006) Optimizing production line of IBS by using simulation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alavi Nezhad Khalil Abad, Seyed Vahid and Yilmaz, Murat and Jahed Armaghani, Danial and Tugrul, Atiye (2016) Prediction of the durability of limestone aggregates using computational techniques. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press)

Alazaiza, Motasem Y D and Ngien, Su Kong and Wan Ishak, Wan Mohd Faizal and Kamaruddin, Samira Albati (2015) A review of light reflection and transmission methods in monitoring non-aqueous phase liquid migration in porous media. In: The 9th Malaysian Technical Universities Conference On Engineering And Technology 2015 (Mucet 2015), 11-13 DEC, 2015, Johor Bahru, Johor.

Alazaiza, Motasem Y. D. and Ngien, Su Kong and Bob, Mustafa M. and Kamaruddin, Samira Albati and Ishak, Wan Mohd. Faizal (2015) Investigation of light non-aqueous phase liquid migration in single and double-porosity soil using light transmission visualization method (LTV). In: The 3rd International Conference on Civil and Environmental Engineering for Sustainability (Iconcees 2015), 1-2 Dec, 2015, Melaka, Malaysia.

Albrka Ali, Shaban Imael and Ismail, Amiruddin and Md. Yusoff, Nur Izzi and Abdul Hassan, Norhidayah and Ibrahim, Ahmad Nazrul Hakimi (2016) Characterization of the performance of aluminum oxide nanoparticles modified asphalt binder. Jurnal Teknologi, 78 (4). pp. 91-96. ISSN 0127-9696

Albshir Budiea, Ahmed Mokhtar (2015) Long term prediction of pipeline corrosion under tropical seabed sediment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Albshir Budiea, Ahmed Mokhtar (2008) Study on durability of high strength palm oil fuel ash pofa a concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aldaw Idrees, F. and Sakrani, S. and Othaman, Z. (2013) The atomic force microscope study of self-assembled silicon nanodots growth using magnetron sputtering system. In: Advanced Materials Research.

Aldin Hosseini, Seyed Jamal (2015) Bond behavior of grouted spiral and splice connection under direct axial and flexural pullout load. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alel, Mohd. Nur Asmawisham and Ghafar, M. and Ramly, N. and Adnan, A. (2013) Preliminary seismic vulnerability assessment of Kundasang, Sabah, Malaysia. In: Conference Geotropika & Icon Build 2013 (GEOCON2013) - Paper 1, 2013.

Alel, Mohd. Nur Asmawisham and Mohamad, Edy Tonnizam and Abdullah, Rini Asnida and Abd. Rahman, Mohd. Mirza and Md. Arshad, Muhamad Asyraaf (2016) Building inventory for seismic risk assessment using unmanned aerial vehicle. In: 10TH International Conference on Geotechnical and Transportation Engineering (GEOTROPIKA 2016), 17-18 Feb, 2016, Kuala Lumpur, Malaysia.

Alel, Mohd. Nur Asmawisham and Ramly, N. and Ghafar, M. and Adnan, A. (2013) Estimation of life casualties for seismic vulnerability assessment in Bukit Tinggi, Pahang, Malaysia. In: Conference Geotropika & Icon Build 2013 (GEOCON2013) - Paper 2, 2013.

Alel, Mohd. Nur Asmawisham (2002) Performance of low and medium-rise steel frames under low intensity earthquake. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alenezi, K. K. and Md. Tahir, Mahmood Md. and Alhajri, T. M. and Badr, M. R. K. and Mirza, Jahangir and Lawana, M. M. and Hosseinpour, Emad (2015) Push-out tests of innovative shear connectors between cold-formed steel section integrated with ferrocement jacket. Jurnal Teknologi, 74 (4). pp. 67-72. ISSN 0127-9696

Algaifi, Hassan Amer Ali (2013) Development of finite element formulation for plate buckling structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alham, Hishamuddin (2000) Development and verification of mathematical models for reinforced concrete encased wide-flanged steel columns exposed to fire. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alhamali, Dhawo Ibrahim and Wu, Jiantao and Liu, Quan and Abdul Hassan, Norhidayah and Md. Yusoff, Nur Izzi and Albrka Ali, Shaban Ismael (2016) Physical and rheological characteristics of polymer modified bitumen with nanosilica particles. Arabian Journal for Science and Engineering, 41 (4). pp. 1521-1530. ISSN 1319-8025

Alhashimi, Mohammed Noori Hussein (2014) Performance of blended cement concrete by using palm oil shells as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alhassan, Hashim Mohammed and Mashros, Nordiana (2015) Modelling of pedestrian speed-density and volume-density relationships in outdoor walkways. Jurnal Teknologi, 73 (4). pp. 91-97. ISSN 2180-3722

Ali, Nazri and Rees, S. W. (2008) The influence of tree-induced suctions on slope stability. In: The International Conference in Geotechnical and Highway Engineering, Geotropika 2008. Universiti Teknologi Malaysia. ISBN 978-983-42613-4-4

Ali, Abdul Razak (2009) Settlement of road embankment on prefabricated vertical drain treated soft ground. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Alaa Yousif (2014) Properties of self compacting concrete containing unground palm oil fuel ash as partial sand replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Bayan Anwer and Saad, Sariffuddin and Osman, Mohd. Hanim (2010) Cold-formed steel frame with bolted moment connections. International Journal of Civil and Structural Engineering, 1 (3). pp. 534-544. ISSN 0976-4399 (Online)

Ali, M. I. and Hashim, Mazlan and Zin, H. S. M. (2013) Assessing water availability over peninsular Malaysia using public domain satellite data products. In: 8th International Symposium of Digital Earth, 2013.

Ali, M. K. F. B. M. and Noor, N. M. and Yahaya, N. and Bakar, A. A. and Abdullah, A. and Masuri, M. A. and Ismail, M. (2016) Application of ultraviolet radiation to control microbiologically influenced corrosion: a case study on soil sample from mangrove. Journal of Engineering Science and Technology, 11 (12). pp. 1695-1704. ISSN 1823-4690

Ali, Md. Hazrat (2008) Conveyance efficiencies for different reservoir releases with and without existing river flow. In: Modeling Techniques of Rainfall and River Flow and Groundwater Contamination. Penerbit UTM , Johor, p. 107.

Ali, Mohd. Fadzli and Joyes, Gordon and Ellison, Linda (2015) Proposing the third generation of an aligned activity system as a theoretical framework in blended learning research. Jurnal Teknologi, 75 (3). pp. 61-66. ISSN 0127-9696

Ali, N. B. M. and Amani, N. and Abd. Samat, Roslida (2011) Developing a framework of economic model for building component lifecycle repair. In: Advanced Materials Research. Trans Tech Publications, Switzerland, 3893 -3897. ISBN 978-303785139-5

Ali, Nazri (2008) Ground stabilization by tree induced suction. In: Ground Improvement & Stabilization. Penerbit UTM , Johor, pp. 89-105. ISBN 978-983-52-0573-6

Ali, Nazri and Mohammed Abdullahi, Mu'azu (2012) Lateral stress induced due root-water-uptake in unsaturated soils. In: 2nd International Conference on Geotechnique, Construction Materials and Environment, Nov.14-16, 2012, Kuala Lumpur, Malaysia.

Ali, Nazri and Rees, S. W. (2009) Linear root water uptake by vegetation. Malaysian Journal of Civil Engineering, 21 (2). pp. 110-124. ISSN 1823-7843

Ali, Nazri (2002) Kajian semula analisis cerucuk pendek dalam pasir terhadap beban mendatar dengan kaedah unsur terhingga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Shettima Umara and Hussin, Mohd. Warid and Ahmad, Yusof and Yau, Mohammed (2015) Effect of sulphuric acid on concrete with iron ore tailings. In: International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr, 2015, Kuala Lumpur, Malaysia.

Ali, Tasnim Yakath (2014) Numerical modelling of contact element for concrete-to-concrete bond. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali , Nazri (2013) Soil suction profile due to tree induce suction. In: GEOCON International Conference 2013, Johor Malaysia, 28-30 October 2013 , 2013, Johor Malaysia.

Ali Agwila, Abdalla (2007) The coefficient of consolidation of cohesive soil by using constant rate strain method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Al-Rahmi, Waleed Mugahed (2012) Evaluating student's satisfaction of e-learning in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Hussein, Abdel Wahab Mohamed (2006) Structure and properties of germanium phosphate based glasses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aliabadi, MH and Saleh, Abdul Latif (2002) Fracture mechanics analysis of cracking in plain and reinforced concrete using the boundary element method. Engineering Fracture Mechanics, 69 (2). pp. 267-280.

Alias, Mohamad Ashari (1999) Pengesanan kedudukan nombor plat kereta menggunakan pendekatan pekali variasi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alias, Muhammad Anwar (2015) Effect of cations on microbial aggregation using brevibacillus panacihumi strain ZB1, lysinibacillus fusiformis strain ZB2 and enterococcus faecalis strain ZL. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, N. and Goonetilleke, A. and Egodawatta, P. (2015) Investigation on parameters influence first flush occurrence in urban residential catchment. In: The 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Alias, N. and Suhari, N. N. Y. and Teh, C. R. C. (2016) Numerical analysis of spray-dic modeling for fruit concentration drying process into powder based on computational fluid dynamic. Jurnal Teknologi, 78 (42464). pp. 25-30. ISSN 0127-9696

Alias, Nor Eliza (2010) An experinmental study of tsunami run-up on a vegetated coastal slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Noraliani and Liu, An and Goonetilleke, Ashantha and Egodawatta, Prasanna (2014) Time as the critical factor in the investigation of the relationship between pollutant wash-off and rainfall characteristics. Ecological Engineering, 64 . pp. 301-305. ISSN 0925-8574

Alias, Noraliani and Liu, An and Prasanna, Egodawatta and Goonetilleke, Ashantha (2014) Sectional analysis of the pollutant wash-off process based on runoff hydrograph. Journal of Environmental Management, 134 . pp. 63-69. ISSN 0301-4797

Alias, Noraliani (2013) First flush analysis in urban catchments. In: 16th International Conference on diffuse Pollution and Eutrophication.

Alias, Yusliza (2015) Effect of rock mass properties on skin friction of rock socket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alih, Sophia C. (2007) The application of artificial neural network in nondestructive testing for concrete bridge inspection rating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alimohammadi, Payman (2014) Behaviour of expanded piles in clay under uplift and compressive loading. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alimohammadi, Payman and Kassim, Khairul Anuar and Nazir, Ramli (2016) Behaviour of expanded piles under upward loading due to radial preloading in soft clay. Arabian Journal of Geosciences, 9 (2). pp. 1-12. ISSN 1866-7511

Alkarimiah, Rosnani (2009) Operational start up and performance of anaerobic stage reactor treating glucose synthetic wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alkhail Balubaid, Saeed Omer Ahmed (2012) Energy efficiency of toll plaza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alkhaly, Yulius Rief (2008) Development of lightweight concrete using hollow spheres. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Almhab, Ayoub and Busu, Ibrahim and Ibrahim, Nourkhair (2007) Estimating of regional evapotranspiration for arid areas using LANDSAT thematic mapper images data : a case study for grape plantation. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Alobaidi, Khaled Ali and Abdul Rahim, Abdrahman and Mohammed, Abdelgadir and Baqutayan, Shadiya Mohamed Saleh (2015) Sustainability achievement and estidama green building regulations in Abu Dhabi vision 2030. Mediterranean Journal of Social Sciences, 8 (4S2). pp. 509-518. ISSN 2039-9340

Altieb Ahmed, Zohair Ahmed (2016) Modification of asphalt binder with various percentages of crumb rubber in flexible pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alwafi, Y. A. and Bidin, Noriah and Gustiono, Dwi and Harun, Sulaiman Wadi (2012) Alloying aluminum with Fe using laser induced plasma technique. Laser Physics, 22 (8). pp. 1364-1367. ISSN 1054-660X

Aly, Amgad Ahmed and Hashim, Abdul Manaf (2015) Evolution of zinc oxide nanostructures grown on graphene by ultrasonic spray pyrolysis and its statistical growth modelling. Nanoscale Research Letters, 10 (1). pp. 1-13. ISSN 1931-7573

Amaludin, Adriana Erica (2015) Performance of geothermal energy piles under thermo-axial loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amani, Nima and Mohamed Ali, Nasly and Mohammed, Abdul Hakim and Abd Samat, Roslida (2012) A survey on the implementation of facilities maintenance management system of building in Iran. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 85-95. ISSN 1823-7843

Amari, Hudabiyah Arshad and Abdul Rahim, Ruzairi and Rahiman, Mohd. Hafiz Fazalul and Abdul Rahim, Herlina and Pusppanathan, Muhammad Jaysuman (2011) Hardware development of an ultrasonic tomography measurement system. Sensors and Transducers, 124 (1). pp. 56-63. ISSN 1726-5479

Aminudin, E. and Md. Din, M. F. and Hussin, M. W. and Abdullah, A. H. and Iwao, K. and Ichikawa, Y. (2016) Properties of agro-industrial aerated concrete as potential thermal insulation for building. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Amiri, I. S. and D., Gifany and Ali, Jalil (2013) Long distance communication using localized optical soliton via entangled photon. IOSR Journal of Applied Physics (IOSR-JAP), 3 (1). pp. 32-39. ISSN 2278-4861

Amirrudin, Siti Nurulhuda (2010) Construction duration for various healthcare facility projects for public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amran, Dayang Nur Fatthanah (2015) Influence of work team effectiveness on project delivery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amri, Yul (2000) Aplikasi pelarasan L1-norm untuk mengesan selisih kasar cerapan ukur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Anang, Rosli (1995) Sifat bata campuran tanah liat dengan abu terbang arang batu, abu kelapa sawit dan abu sekam padi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anang Masuri, Mohd. Rayme (2009) Formulation of key performance indicators through implementation of private finance initiatives (PFI) in student hostel privatisation at Universiti Teknikal Malaysia Teknikal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Andalib, R. and Abd. Majid, M. Z. and Hussin, M. W. and Ponraj, M. and Keyvanfar, A. and Mirza, J. and Lee, H. S. (2016) Optimum concentration of Bacillus megaterium for strengthening structural concrete. Construction and Building Materials, 118 . pp. 180-193. ISSN 0950-0618

Andalib, Ramin (2015) The characteristics of structural concrete using bacteria improvement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Andalibizadeh, Behrouz and Marsono, Abdul Kadir (2013) Using constractability for commercialization of new academic ideas to improve and redesign sustainable construction by SMEs. Engineering Science and Technology: an International Journal (ESTIJ), 3 (6). pp. 762-768. ISSN 2250-3498

Ang, Boon Hui (2012) 2-D DWT system architecture for image compression. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ang, Ting Guan (2008) The influence of the anchorage of independent bent-up bar on its shear capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ang, Tune Hoe (1999) Satu kajian kesuaian penggunaan gps dalam ukur kadaster di semenanjung Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Anis, S. and Md. Tahir, Mahmood and Sulaiman, Arizu and Shek, Poi Ngian and Tan, Cher Sian and Beng Hong, Ahmad Kueh (2011) Behaviour of composite beam with trapezoid web profiled steel section in sub-assemblage frame. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1271-1274. ISBN 978-303785127-2

Anis, Samsol Faizal (2002) Fault detection by experimental vibration analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anthony, Santhanamary and Said, Hamdan and Mohamad, Ismail and Mokhtar, Mahani (2015) Self-efficacy belief as a practical and parsimonious evaluation criterion in school leadership training. Mediterranean Journal of Social Sciences, 6 (1S1). pp. 20-29. ISSN 2039-9340

Anuar, Aznah Nor (2013) The effect of cycle time on the characteristics and perFormance of aerobic granular sludge treating high strength wastewater. In: 5th IWA-ASPIRE Conference & Exhibition, 2013.

Anuar, Aznah Nor (2013) Performance of aerobic granular sludge sequencing batch reactor treating rubber wastewater at different hydraculis retention time. In: 5th IWA-ASPIRE Conference & Exhibition, 08 - 12 September 2013, Daejeon, Korea.

Anuar, Aznah Nor (2013) A review on the development and application of aerobic granular sludge for wastewater treatment. In: Water Malaysia 2014, 2013.

Anuar, Aznah Nor (2013) Treatment of rubber wastewater using aerobic granular sludge in a sequential batch reactor. In: 4th International Graduate Conference on Engineering, Science and Humanities 2013 (IGECESH 2013), 2013.

Anuar, Aznah Nor and Farrah Aini Dahalan, Aznah Nor and Aznah Nor anuar, Aznah Nor (2013) Distribution of bacteriachlorophyll in aerobic granular sludge with diurnal cycle. In: Symposium on Algae Research, 2013, 2013.

Anuar, Aznan Nor and Abd. Azizi, Azri Hizami and Mohamed, Mohd. Firdaus (2010) Enhanced aerobic sludge granulation in cyclic aerobic granular sludge bioreactor (CAgSBio) by Mg2+ augmentation. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Arabshahi, Zohreh and Kashani, Jamal and Rahimian Koloor, Seyed Saeid and Abdul Kadir, Mohammed Rafiq and Azari, Abbas (2012) Design analysis of TMJ implant under physiological loading condition. Advanced Materials Research, 488-48 . pp. 996-1000. ISSN 1022-6680

Ardianshah, Mohd. Shahrul Nizam (2014) Meshfree formulation of geometric composite beam with partial interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arefnia, Ali and Kassim, Khairul Anuar and Sohaei, Houman and Ahmad, Kamarudin and A. Rashid, Ahmad Safuan (2015) Numerical and physical modelling of Kaolin as backfill material for polymer concrete retaining wall. Jurnal Teknologi, 76 (2). pp. 17-22. ISSN 2180-3722

Ariff, Mohd. Afendi (2015) Piles performances behavior of marine structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ariffin, Aqbal Hafeez and Solah, Mohd. Syazwan and Hamzah, Azhar and Md. Isa, Mohd. Hafzi and Mohd. Jawi, Zulhaidi and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2016) Exploratory study on airbag suitability for low engine capacity motorcycles. Jurnal Teknologi, 78 (4). pp. 65-69. ISSN 0127-9696

Ariffin, Nur Farhayu (2012) Durability of geopolymer mortars using agro-industrial waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ariffin, Nur Farhayu and Hussin, Mohd. Warid and Mohd. Sam, Abdul Rahman and Han, Seung Lee and A. Khalid, Nur Hafizah and Abdul Shukor Lim, Hasanah and Samadi, Mostafa (2015) Mechanical properties and self-healing mechanism of epoxy mortar. Jurnal Teknologi, 77 (12). pp. 37-44. ISSN 2180-3722

Ariffin, Nur Farhayu and Hussin, Mohd. Warid and Mohd. Sam, Abdul Rahman and Han, Seung Lee and Ismail, Mohamed A. (2015) Effect on compressive strength of epoxy-modified mortar with further dry-curing. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Ariffin, Nur Farhayu and Hussin, Mohd. Warid and Mohd. Sam, Abdulrahman and Bhutta, Muhammad Aamer Rafique and Abd. Khalid, Nur Hafizah and Mirza, Jahangir (2015) Strength properties and molecular composition of epoxy-modified mortars. Construction and Building Materials, 94 . pp. 315-322. ISSN 0950-0618

Ariffin, Nur Farhayu and Hussin, Mohd. Warid and Rafique Bhutta, Muhammad Aamer and Abdul Shukor Lim, Nor Hasanah and Fahim, Ghassan (2014) Properties of polymer modified mortars. In: Seminar Penyelidikan Kejuruteraan Awam (SEPKA 2014), 9-10, April 2014, Skudai, Johor.

Ariffin, Saparudin (1992) Application of control theory in inventory and order based production control system (IOBPCS. Jurnal Teknologi, 20 . pp. 20-32. ISSN 2180-3722

Ariffin , Rohizat (2010) Allowable interface slip of composite slab to achive full interaction behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aris, Azmi and Ooi, Boon Siew and Kon, Suh Kee and Ujang, Zaini (2008) Tertiary treatment palm oil mill effluent using fenton oxidation. Malaysian Journal of Civil Engineering, 20 (1). pp. 12-25. ISSN 1823-7843

Aris, Amer Faizal (2009) Strength, threat and cultural differences : a case study of Malaysian contractor in Indonesian construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aris, Azmi (2008) An overview of fenton oxidation process in water and wastewater treatment. In: Advances in Water and Wastewater Treatment Technologies. Penerbit UTM , Johor, p. 80. ISBN 978-983-52-0580-4

Aris, Azmi and Mokhtar, N. and Ujang, Zaini and A. Majid, Z. (2007) Treatment of acidic water from Bekok River using open limestone channel. Water Science and Technology: Water Supply, 7 (4). pp. 65-71. ISSN 1606-9749

Aris, Azmi and Salim, Razman and Sanagi, Marsin (1999) Treatment of textile finishing wastewater using fenton's reagent. Jurnal Kejuruteraan Awam, 11 (2). pp. 35-45. ISSN 0128-0147

Aris, Azmi and Sharratt, Paul N. (2005) Decolourisation of reactive dyestuff using Fenton's reagent. Jurnal Kejuruteraan Awam, 17 (2). pp. 1-17. ISSN 0128-0147

Aris, Azmi (2013) Enhancement of hydroxyl radical formation in hydrodynamic cavitation using multiple orifice plates. In: International Conference on Innovation Challenges in Multidisciplinary Research & Practice (ICMRP),.

Aris, Noor Fatheyah and A. Majid, Rohah and Mohamad Darus, Mohana Hasniza and Wan Hassan, Wan Hasamuddin (2014) The effects of fibre contents on the tensile strength and surface morphology of high density polyethylene/palm pressed fibre biocomposite film. In: Applied Mechanics and Materials/ World Virtual Conference on Advanced Research in Materials and Engineering Application (WVCARMEA2014), 2014.

Armaghani, D. J. and Mahdiyar, A. and Hasanipanah, M. and Faradonbeh, R. S. and Khandelwal, M. and Amnieh, H. B. (2016) Risk assessment and prediction of flyrock distance by combined multiple regression analysis and Monte Carlo simulation of quarry blasting. Rock Mechanics and Rock Engineering, 49 (9). pp. 3631-3641. ISSN 0723-2632

Armaghani, Danial Jahed and Faradonbeh, Roohollah Shirani and Rezaei, Hossein and A. Rashid, Ahmad Safuan and Amnieh, Hassan Bakhshandeh (2016) Settlement prediction of the rock-socketed piles through a new technique based on gene expression programming. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press)

Armaghani, Danial Jahed and Hajihassani, Mohsen and Marto, Aminaton and Faradonbeh, Roohollah Shirani and Mohamad, Edy Tonnizam (2015) Prediction of blast-induced air overpressure: a hybrid AI-based predictive model. Environmental Monitoring and Assessment, 187 (11). p. 666. ISSN 0167-6369

Armaghani, Danial Jahed and Hasanipanah, Mahdi and Amnieh, Hassan Bakhshandeh and Mohamad, Edy Tonnizam (2016) Feasibility of ICA in approximating ground vibration resulting from mine blasting. Neural Computing and Applications . pp. 1-9. ISSN 0941-0643 (In Press)

Armaghani, Danial Jahed and Mohamad, Edy Tonnizam and Hajihassani, Mohsen and Yagiz, Saffet and Motaghedi, Hossein (2016) Application of several non-linear prediction tools for estimating uniaxial compressive strength of granitic rocks and comparison of their performances. Engineering with Computers, 32 (2). pp. 189-206.

Arowosegbe, Augustine Ajayi and Mohamed, Sarajul Fikri (2015) Impact assessment of change management capability maturity level of contractors on time performance of building projects in Nigeria. In: Proceeding, ICRIL International Conference of Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Arreshvhina, N. and Fadhadli, Z. and Mohd Warid, H. and Zuhairy, A. H. and Roswadi, Roswadi (2006) Microstructural behavior of aerated concrete containing high volume of GGBFS. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Arsad, Agus and Rahmat, Abdul Razak and Hassan, Azman and Iskandar, Shaipul Nizam (2011) Mechanical and rheological characterization of PA6 and ABS blends-with and without short glass fiber. Journal of Applied Sciences, 11 (13). pp. 2313-2319. ISSN 1812-5654

Arsad, Azamuddin (2009) Development of river restoration plan for upstream tributary of Sungai Pulai based on water quality and land used activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arshad Amari, Hudabiyah and Abdul Rahim, Ruzairi and Fazalul Rahiman, Mohd. Hafiz and Pusppanathan, Jaysuman (2011) Front-end design of an ultrasonic tomography measurement system. Jurnal Teknologi, 54 (1). pp. 289-298. ISSN 0127–9696 (Print); 2180-3722 (Online)

Asgari, Hamid (2013) Simulation of non-point sources of pollution in a heterogeneous media by using 2D regional groundwater flow model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ashenagar, Javid (2010) Comparative assessment of trip generation category analysis and regression modelling techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asif, Mohd. Azmi (2010) Cadangan Perjanjian Aras Perkhidmatan (SLA) untuk aktiviti di antara sektor bisnes dan sektor pakar di JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Askari, Muhamad and Yusop, Z. and Katimon, A. and Aris, A. and Mohd Yusoff,, A. R. and Said, M. N. and Mohd Nasir, K. A. and Hanapi, M. N. and Harun, S. and Musta, B. and Arman, N. Z. and Kambari, K. (2012) Conjuctive-use of surface and groundwater resources for FELDA Sahabat in Lahad Datu Sabah Malaysia. In: The 2nd International Conference on Water Resources (ICWR2012) , 5-9 Nov, 2012, Kedah, Malaysia.

Asmi, Ade and Rasli, Amran and Abdul Majid, Muhd. Zaimi and Abdul Rahman, Ismail (2009) Malaysian practitioners perception on knowledge management in construction consulting companies. The Journal of Modern Applied Science, 3 (7). pp. 103-114. ISSN 1913-1844 (Prints); 1913-1852 (Electronic)

Asof, Marwan and Gofar, Nurly and Rahmatullah, Rahmatullah (2008) Response of clay shale to the variation of moisture content. Geotechnical & Highway Engineering .

Asof, Marwan and Gofar, Nurly (2010) Block model approach for analysis of rock bench stability in open pit mines. Malaysian Journal of Civil Engineering , 22 (1). pp. 119-132. ISSN 1823-7843

Asri, Z and Singh, Bachan and Abdul Hamid, A.R (2013) Squatter houses in the area of Johor Bahru id 227. In: Proceeding GEOCON 2013, 28th-30th October 2013, Persada Johor International Convention Centre, Johor Bahru, Johor.

Assadian, Mahtab and Idris, Mohd. Hasbullah and Mehraban, Saleh and Jafari, Sajjad and Abdul Kadir, Mohammed Rafiq (2012) Effect of HF concentration on corrosion resistance of biomedical implants. Advanced Materials Research, 463-46 . pp. 837-840. ISSN 1022-6680

Assadsangabi, Babak and Mohamed Ali, Mohamed Sultan Sultan and Takahata, Kenichi (2012) Bidirectional actuation of ferrofluid using micropatterned planar coils assisted by bias magnetic fields. Sensors And Actuators, A: Physical, 173 (1). pp. 219-226. ISSN 0924-4247

Astana, Dorina (2009) The effect of epoxy bitumen modification on hot mix asphalt properties and rut resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asyran, Muhammad and Setan, Halim and Mat Amin, Zulkarnaini (2004) Analysis on GPS-RTK techniques for continuous stuctural monitoring. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Atan, Hasni @ Ihsan (2000) Flexural behaviour of trapezoid web plate girder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Attaran, Seyed Mohammad and Yusof, Rubiyah (2015) Enhancement of control’s parameter of decoupled HVAC system via adaptive controller through the system identification tool box. Jurnal Teknologi, 76 (1). ISSN 2180-3722

Attau, Jaimey (2014) Effectiveness of safety programs in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aung, Lwin Moe and Abd. Aziz, Ahmad Aizuddin and Abu, Aminudin and Sulaiman, Shamsuddin (2015) Analysis of complex plastics shell injection molding processes by mold-flow insight. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hong Kong.

Awal, A. S. M. A. and Majid, M. Z. A. and Shirazi, S. M. and Yuan, K. Y. (2014) Deformation behaviour of glass fibre reinforced concrete containing palm oil fuel ash. In: Applied Mechanics and Materials, 29-30 Nov, 2014, Indonesia.

Awang, Abd. Rahim (2015) Characteristics of coal ash mixtures as replacement materials in ground improvement works. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun (2013) Effects of eccentricity on SSTT-confined HSC columns. International Journal of Scientific & Engineering Research (IJSER), 4 (10). pp. 1694-1696. ISSN 2229-5518

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) Design of short SSTT-confined HSC columns. International Journal of Research in Engineering and Technology (IJRET), 2 (8). pp. 331-336. ISSN 2319-1163

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) The design of short sstt-confined circular HSC columns. International Journal of Research in Engineering and Technology, 2 (8). pp. 331-336. ISSN 2319-1163

Awang, Ahmad Fauzi (2012) Establishment of a work programme model for contractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Haryati (2000) Uniaxial deformation of unfilled and filled joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Mariyami and Kristanto, Dedy (2003) Estimation of surface tension for two immiscible fluids using lattice gas automata. In: SPE International Improved Oil Recovery Conference In Asia Pacific, 2003, Kuala Lumpur.

Awang, Mohd. Noor (2003) Car parking provision analysis based on the land use types for Malaysian towns. Project Report. UTM. (Unpublished)

Awang @ Muda, Mohd. Aswarudin (2015) Framework of measurement engineer workload at Public Work Department district of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Abdullah Zawawi and Rais, Ahmad Zaidon and Abd. Hamid, Hazlan and Yassin, Mohamad Salleh (2002) Feasibility study on replacement of steel signboard post with prestressed concrete post. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ayop, Sallehuddin Syah and Mohamad Zin, Rosli and Ismail, Mohammad (2006) Condition assessment of marine structures using functional condition index approach. Malaysian Journal of Civil Engineering, 18 (2). pp. 129-138. ISSN 1823-7843

Ayop, Zalilah (2013) Post-tension column for IBS blockwork building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azam Rana, Mohammad and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2007) Algorithm for calculation of cephalometric soft tissue facial traits. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Azdarpour, Amin and Asadullah, Mohammad and Mohammadian, Erfan and Hamidi, Hossein and Junin, Radzuan and Karaei, Mohammad Afkhami (2015) A review on carbon dioxide mineral carbonation through pH-swing process. Chemical Engineering Journal, 279 . pp. 615-630. ISSN 1385-8947

Azimi, Mohammad Amin and Adnan, Azlan and Md. Tahir, Mahmood and Sam, Abdul Rahman (2015) Seismic performance of ductility classes medium RC beam-column connections with continuous rectangular spiral transverse reinforcements. Latin American Journal of Solids and Structures, 12 (4). pp. 787-807. ISSN 1679-7817

Azimi, Mohammad Amin and Ponraj, Mohanadoss and Bagherpourhamedani, Asma and Md. Tahir, Mahmood and Abd. Razak, Sk. Muiz Sk. and Pheng, Ong Peng (2015) Shear capacity evaluation of reinforced concrete beams: finite element simulation. Jurnal Teknologi, 77 (16). pp. 59-66. ISSN 0127-9696

Aziz, Amir and Mamat, Rizalman and Amin, Makeen and Wan Ali, Wan Khairuddin (2012) Effect of propellant composition to the temperature sensitivity of composite propellant. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Aziz, Farha (2010) CO2 and surface temperature reduction on building surface using green walls. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aziz, Farhana (2015) Preparation and characterization of ternary blend polymer solar cells using solvent and thermal annealing treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Aziz, Nur Aimi Syaqilah (2013) Hydrophobic, structural and optical properties of zinc silica thin films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aziz, Nur Liyana (2014) Effect of moisture content to the bonding performance of timber-concrete composite beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azizan, N. A. and Kamaruddin, S. A. and Chelliapan, S. (2016) Simulation of dense non-aqueous phase liquid remediation through steam-enhanced extraction. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3731-3739. ISSN 1819-6608

Azizan, Nor Asni and Kamaruddin, Samira Albati and Chelliapan, Shreeshivadasan (2016) Simulation of dense non-aqueous phase liquid remediation through steam-enhanced extraction. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3731-3739. ISSN 1819-6608

Azizan, Nor Asni and Kamaruddin, Samira Albati and Chelliapan, Shreeshivadasan (2015) Steam-enhanced extraction experiments, simulations and field studies for dense non-aqueous phase liquid removal: a review. In: The 3rd International Conference on Civil and Environmental Engineering for Sustainability (Iconcees 2015), 1-2 Dec, 2015, Melaka, Malaysia.

Azman, Shamila (2012) Application of Biological Water Quality Index (BWQI) in assessing pollution level of Melana River, Johor. In: International Seminar of Analytical Sciences 2012, 12-14 November, 2012, Indonesia.

Azman, Shamila (2011) Watering of landscape plants using wastewater treated with terminalia. In: 4th IWA Aspire Conference And Exhibition.

Azmi, Anita (2002) Ciri-ciri bahan elektro-optik yang sesuai untuk pensuisan optik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Azmi, Azharie Effenddy (2008) The properties and flexural behaviour of self compacting concrete using palm oil fuel ash and admixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azmi, Nurdiana (2008) The development of matrix measurement guideline of collaborative teamwork environment in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azmi, Siti Izaidah and Ab. Halim, Mohd. Hakim and Abdul Jamal, Nur Syahida and Nor Anuar, Aznah and M. Bob, Mustafa and Ujang, Zaini (2014) Development and characteristics of aerobic granular sludge at 40°C. In: National Seminar on Civil Engineering Research (SEPKA 2014), 9-10, April 2014, Skudai, Johor.

Abdul Majid, Hairudin and Wulandhari, Lili Ayu and A. Samah, Azzurah and Chin, Ang Jun (2012) A framework in determining extended warranty by using two dimensional delay time model. Advanced Materials Research, 433-44 . pp. 2997-3002. ISSN 1022-6680

Ahmadi, Mohammad Taghi and Johari, Zaharah and Amin, N. Aziziah and Ismail, Razali (2012) Band energy effect on carrier velocity limit in graphene nanoribbon. Journal Of Experimental Nanoscience, 7 (1). pp. 62-73. ISSN 1745-8080

Ahmad, Yusof (2011) Ductility of timber beams strengthened using carbon fiber reinforced polymer plates. In: International Conference On Structural Engineering, Construction And Managemant (Icsecm).

B

Ba-Karait, Nasser Omer and Shamsuddin, Siti Mariyam and Sudirman, Rubita (2012) EEG signals classification using a hybrid method based on negative selection and particle swarm optimization. Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics), 7376 L . pp. 427-438.

Babashamsi, Peyman and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli (2016) The effect of preservation maintenance activities in asphalt concrete pavement sustainability. Jurnal Teknologi, 78 (4). pp. 117-124. ISSN 0127-9696

Bachok, Mohd. Fairuz and Shamsudin, Supiah and Zainal Abidin, Roslan (2015) Effectiveness of windstorm-producing thunderstorms early warning issues in Peninsular Malaysia. In: 6th International Conference on Information Management and Engineering (ICIME 2014), 6-7 Dis, 2015, Paris, France.

Badli, Mohamad Iqbal (2013) Non-linear Meshfree formulation of anchored reinforcing bar with bond slip effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Badri Hamid, Ahmed Ali (2013) Factors affecting the success of a construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Badrul Hisham, Amirah Aisha and Elnimair, Mohamed Omar and Abdul Rahim, Ruzairi and Mohd. Fadzil, Naizatul Shima and Leow, Pei Ling (2012) A review of using ultrasonic sensors in obstacle detection. In: Process Tomography & Instrumentation -Series 9. Penerbit UTM, Skudai, Johor, pp. 207-222. ISBN 978-983-52-0816-4

Bahadoran, Mahdi and Ahmad Noorden, Ahmad Fakhrurrazi and Mohajer, Faeze Sadat and Abd. Mubin, Mohamad Helmi and Chaudhary, Kashif and Jalil, Muhammad Arif and Ali, Jalil and Yupapin, Preecha (2016) Detection of Salmonella bacterium in drinking water using microring resonator. Artificial Cells Nanomedicine and Biotechnology, 44 (1). pp. 315-321. ISSN 2169-1401

Bahari, Nurul Anis (2010) Penggunaan abu terbang arang batu sebagai bahan pengisi dalam campuran panas konkrit berasfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharim, Nor Bakhiah (2015) Spatial and temporal distributions of water physicochemical, sediment quality and sedimentation in Sembrong Reservoir. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharudin, Khairul Salleh (1996) Ultimate strength of glued-laminated timber beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakar, Norazmi (2009) Kerangka penghasilan parameter penilaian selepas dihuni di bangunan pejabat kerajaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Bakhary, Norhisham (2006) Vibration-based damage detection of slab structure using artificial neural network. Jurnal Teknologi B (44B). pp. 17-30. ISSN 0127-9696

Bakhary, Norhisham and Yahya, Khairulzan and Ng Chin, Nam (2004) Univariate Artificial Neural Network In Forcasting Demand Of Low Cost House In Petaling Jaya. Jurnal Teknologi B (40B). pp. 67-75. ISSN 0127-9696

Bakhary, Norhisham (2009) Structural condition monitoring and damage identification with artificial neural network. PhD thesis, University of Western Australia.

Bakhary, Norhisham and Abdul Rahman, Azlan and Ahmad, Baderul Hisham and Goh, Lyn Dee (2014) Probabilistic approach in assessing structural damage using multistage artificial neural network using static and dynamic data. Proceedings of ISMA 2014 - International Conference on Noise and Vibration Engineering and USD 2014 - International Conference on Uncertainty in Structural Dynamics . pp. 3777-3788. ISSN 9789073802919

Bakhary, NorHisham and Hao, Hong and Deeks, Andrew J. (2010) Structure damage detection using neural network with multi-stage substructuring. Advances in Structural Engineering, 13 (1). pp. 1-16. ISSN 1369-4332

Bakhary , Norhisham (2013) Prediction of unmeasured modal data using statistical multi-stage ann fordamage detection: an experimental verification. In: 15th Asia Pacific Vibration Conference, 2013.

Bakhsheshi Rad, Hamid Reza (2013) Enhancement of corrosion resistance of magnesium by alloying, fluoride treatment and nano-hydroxyapatite coating for biomedical applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bakhshi, Mohammad and Othman, Norazli and Wahab, Mohammad Hussaini (2015) Green campus in promoting green open spaces in University Technology Malaysia Kuala Lumpur campus. In: Proceedings of International Joint Conference Senvar-Inta-Van 2015, 24-26 Nov, 2015, Johor Bahru, Johor.

Bakhteri, Jahangir (2003) Generator loads study of a hydro-electric power house structure. Jurnal Teknologi B (39B). pp. 29-46. ISSN 0127-9696

Bakhteri, Jahangir and Omar, Wahid and Makhtar, Ahmad Mahir (2002) A critical review of the reinforced concrete columns and walls concealing rain water pipe in multistorey buildings. Jurnal Kejuruteraan Awam, 14 (2). pp. 39-52. ISSN 1823-7843

Bakhteri, Jahangir and Omar, Wahid and Makhtar, Ahmad Mahir (2004) Analysis of the reinforced concrete columns concealing rain water pipe in multi-storey buildings. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Bakhteri, Jahangir and Makhtar, Ahmad Mahir (2003) Investigation of failure modes in unreinforced brick masonry walls subjected to different load combinations. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Bakhtiar, Nur Wahida (2014) The application of braced and unbraced frames in reinforced concrete structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakri, Ahmadon and Mohd. Zin, Rosli and Misnan, Mohd. Saidin and Mohammed, Abdul Hakim (2006) Occupational Safety and Health (OSH) management systems: towards development of safety and health culture. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Balakrishnan, Malarvili and Ting, Chee Ming and Shaikh Salleh, Sheikh Hussain (2009) New learning algorithm based on Hidden Markov Model (HMM) as stochastic modelling for pattern calssification. Project Report. Faculty of Biomedical Engineering and Health Science, Skudai, Johor. (Unpublished)

Balakrishnan, Balamohan and Abdul Awal, A. S. M. (2016) Mechanical properties and thermal resistance of high volume fly ash concrete for energy efficiency in building construction. Key Engineering Materials, 678 . pp. 99-108. ISSN 1013-9826

Balakrishnan, Harintharavimal and Masoumi, Iman and A. Yussuf, Abdirahman and Imran, Muhammad and Hassan, Azman and Wahit, Mat Uzir (2012) Ethylene copolymer toughened polylactic acid nanocomposites. Polymer-Plastics Technology And Engineering, 51 (1). pp. 19-27. ISSN 0360-2559

Balarabe, Abubakar Sadeeq (2016) Level of service analysis of selected walkways corridors in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir (2013) Life cycle assessment of brick and timber house and effects on climate change in Malaysia. Journal of Basic and Applied Scientific Research, 3 (9). pp. 305-310. ISSN 2090-4304

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Yahya, Khairulzan (2013) Life cycle assessment of two different IBS of recipe endpoint (E) LCIA method. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013).

Balasbaneh , Ali Tighnavard (2010) Hot climate air flow study and affect of stack ventilation in residential building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Balogun, Abdul-Lateef (2009) Three dimensional visualization of water pipelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Baloo, Lavania (2009) Impact of fertilizer application at UTM farm on water quality of a catchment area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bamaga, Saleh and Ismail, Mohamed A. and Hussin, Mohd. Warid (2010) Chloride resistance of concrete containing palm oil fuel ash. Concrete Research Letters, 1 (4). pp. 158-166. ISSN 2180-1371

Bandi, Shamsul Hadi (2008) Collaborative usage of ICT DBMS in construction cost control : the post contract perspectives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Banki, Mohammed Bala and Ismail, Hairul Nizam (2015) Understanding the characteristics of family owned tourism micro businesses in mountain destinations in developing countries: evidence from Nigeria. Tourism Management Perspectives, 13 . pp. 18-32. ISSN 2211-9736

Baradaran Rohani, Mahsa (2012) Developing a framework for deploying web 2.0 in UTM e-learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Barati, Reza (2013) Evaluation on benefits and problems of conventional and BIM based documentation through comparison method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Barau, Aliyu Salisu and Maconachie, Roy A. and Muhamad Ludin, Ahmad Nazri and Abdulhamid, Adnan (2015) Urban morphology dynamics and environmental change in Kano, Nigeria. Land Use Policy, 42 . pp. 307-317. ISSN 0264-8377

Bari Razib, Hasibul (2012) Evaluation of upgradable transitional shelter desings in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Barnes, P. and Clark, S. M. and Hausermann, D. and Fentiman, C. and Muhamad, M. N. and Rashid, S. (1992) Time-resolved studies of the early hydration of cements using synchrontron energy-dispersive diffraction. Phase Transitions, 39 (124). pp. 117-128.

Baruddin, Hassim and Ses, Sahrum (2005) Accuracy analysis of polynomial rectification for Quickbird imagery. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Batumalay, Malathy and Ahmad, Fauzan and Lokman, Asiah and Jasim, A. A. and Harun, Sulaiman Wadi and Ahmad, H. (2014) Tapered plastic optical fiber coated with single wall carbon nanotubes polyethylene oxide composite for measurement of uric acid concentration. Sensor Review, 34 (1). pp. 75-79. ISSN 0260-2288

Batumalay, Malathy and Harun, Sulaiman Wadi and Ahmad, Fauzan and Md. Nor, Roslan and R. Zulkepely, Nurul and Ahmad, Harith (2014) Tapered plastic optical fiber coated with graphene for uric acid detection. IEEE Sensors Journal, 14 (5). pp. 1704-1709. ISSN 1530-437X

Batumalay, Malathy and Harun, Sulaiman Wadi and Ahmad, Fauzan and Md. Nor, Roslan and Zulkepely, Nurul Rozullyah and Ahmad, Harith (2014) Study of a fiber optic humidity sensor based on agarose gel. Journak of Modern Optics, 61 (3). pp. 244-248. ISSN 0950-0340

Bavafa, Ali Asghar (2012) Evaluation of construction time performance and waste time reduction by utilizing lean paradigm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bazyar, Mohsen and Sudirma, Rubita (2015) A new MPEG layer III steganography technique by changing quantized spectrum values. International Journal of Applied Engineering Research, 10 (4). pp. 8913-8920. ISSN 0973-4562

Bazyar, Mohsen and Sudirman, Rubita (2015) A new method to increase the capacity of audio steganography based on the LSB algorithm. Jurnal Teknologi, 74 (6). pp. 49-53. ISSN 0127-9696

Behbahani, Fatemeh (2013) Tuning of controller gains for vehicle following system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Behbahani, Hamid Pesaran and Adnan, Azlan and Vafaei, Mohammadreza and Ong, Peng Pheng and Shad, Hossein (2017) Effects of TLCD with maneuverable flaps on vibration control of a SDOF structure. Meccanica, 52 (6). pp. 1247-1256. ISSN 0025-6455

Behnia, Arash (2012) Finite element analysis of high modal dynamic responses of composite floor due to human motion induction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Behrouz, Gordan and Adnan, Azlan and A. Kadir, Mariyana Aida (2014) Soil saturated simulation in embankment during strong earthquake by effect of elasticity modulus. Modelling and Simulation in Engineering, 2014 . ISSN 0168-7559

Bejarbaneh, Behnam Yazdani and Bejarbaneh, Elham Yazdani and Amin, Mohd. For Mohd. and Fahimifar, Ahmad and Jahed Armaghani, Danial and Majid, Muhd. Zaimi Abd. (2016) Intelligent modelling of sandstone deformation behaviour using fuzzy logic and neural network systems. Bulletin of Engineering Geology and the Environment . pp. 1-17. ISSN 1435-9529 (In Press)

Ben-Edigbe, Johnnie and Ghaemi, Syed Mehrdad and Mashros, Nordiana (2013) Prevalence of traffic kinematic wave at priority junction with entry hump. Malaysian Journal of Civil Engineering, 25 (2). pp. 169-176. ISSN 1823-7843

Benferdia, Youcef (2015) Integrating cooperative users to develop framework for an effective mobile physiotherapy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Benny, Chan and Mohd. Sani, Mohd. Syahrul Hisyam and Cher, Siang Tan and Yeong, Huei Lee and Mohammad, Shahrin and Osman, Mohd. Hanim (2015) Experimental investigation on flexural behaviour with cold-formed steel cut-curved channel. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Beringer, J. and Hutley, L. B. and McHugh, I. and Arndt, S. K. and Campbell, D. and Cleugh, H. A. and Cleverly, J. and De Dios, V. R. and Eamus, D. and Evans, B. and Ewenz, C. and Grace, P. and Griebel, A. and Haverd, V. and Hinko Najera, N. and Huete, A. and Isaac, P. and Kanniah, K. and Leuning, R. and Liddell, M. J. and MacFarlane, C. and Meyer, W. and Moore, C. and Pendall, E. and Phillips, A. and Phillips, R. L. and Prober, S. M. and Restrepo Coupe, N. and Rutledge, S. and Schroder, I. and Silberstein, R. and Southall, P. and Sun Yee, M. and Tapper, N. J. and Van Gorsel, E. and Vote, C. and Walker, J. and Wardlaw, T. (2016) An introduction to the Australian and New Zealand flux tower network OzFlux. Biogeosciences, 13 (21). 5895 5916. ISSN 1726-4170

Besawa Jagar Singh, Bachan Singh and Abdul Hamid, Abdul Rahim and Yahya, Erlina Ubaizah (2014) Selection of contractors for minor works by quotation. In: SEPKA 2014 Seminar on Civil Engineering Research, 14 - 15 April 2014, Skudai, Johor.

Besawa Jagar Singh, Bachan Singh and Rad, Kiyanoosh Golchin and Abdul Hamid, Abdul Rahim and Morshedi. E., S. Reza (2014) Assessing the level of understanding of contractors regarding the workers' productivity in construction industry. In: National Seminar on Civil Engineering Research (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Bhutta, M. Aamer Rafique and Tsuruta, K. and Mirza, Jahangir (2012) Evaluation of high-performance porous concrete properties. Construction and Building Materials, 31 . pp. 67-73. ISSN 0950-0618

Bhutta, Muhammad Aamer Rafique (2011) Air permeability of hardener-free epoxy-modified mortars using NDT. Concrete Research Letters, 2 (2). pp. 241-248. ISSN 2180-1371

Bhutta, Muhammad Aamer Rafique and Mohd. Warid, Hussin and Mohd. Ariffin, Mohd. Azreen and Mohd. Tahir, Mahmood (2014) Sulphate resistance of geopolymer concrete prepared from blended waste fuel ash. Journal of Materials in Civil Engineering, 26 (11). ISSN 0899-1561

Bhutta, Muhammad Aamer Rafique and Radin Sumadi, Salihuddin and Hussin, Mohd. Warid (2013) Properties of multi-blended cement mortars using agro-industrial wastes. Malaysian Journal of Civil Engineering, 25 (1). pp. 10-19. ISSN 1823-7843

Bibi, Tayyaba and Mirza, Jahangir and Khan, Saba and Hamid, Humna and Fida, Zanib and Md. Tahir, Mahmood (2015) Resistance of concrete protective coatings in different chemical environments. Jurnal Teknologi, 74 (4). pp. 183-189. ISSN 0127-9696

Bibi Farouk, Abdulwarith Ibrahim and Abdul Hassan, Norhidayah and Mahmud, Mohd Zul Hanif and Mirza, Jahangir and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Yaacob, Haryati and Md. Yusoff, Nur Izzi (2017) Effects of mixture design variables on rubber bitumen interaction properties of dry mixed rubberized asphalt mixture. Materials and Structures, 50 (1). pp. 1-12. ISSN 1359-5997

Bidin, Noriah (1995) Studies on laser induced cavitation erosion and mechanism of cavitation damage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bidin, Noriah (1995) Studies on laser induced cavitation erosion and mechanism of cavitation damage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bidin, Noriah and Ab. Razak, Siti Noraiza (2011) Effect of multipulses exposure on excimer laser annealed polycrystalline silicon thin films. Enabling Science and Nanotechnology, 1341 . pp. 100-103. ISSN 1022-0038

Bidin, Noriah and Krishnan, Ganesan (2011) Characterization of 0.5 at % nd doped YVO4 pumped by diode laser. AIP Conference Proceedings, 1341 . pp. 272-274. ISSN 0094-243X

Blockley, David (2008) A special publication of the institution of civil engineers with the institution of structural engineers. Institution of Civil Engineers .

Bob, Mustafa and Azmi, Siti Izaidah and Abdul Jamal, Nur Syahida and Ab. Halim, Mohd Hakim and Nur Anuar, Aznah and Ujang, Zaini (2015) Laboratory investigation of aerobic granular sludge performance at high temperature. In: Eighteenth International Water Technology Conference (IWTC18), 12-14 March, 2015, Egypt.

Bolong, Nurmin and Ismail, Ahmad Fauzi and Salim, M. R. and Rana, D. and Matsuura, Takeshi (2009) Modification of polyethersulfone hollow fiber membranes by novel charged surface modifying macromolecule (cSMM) blends for water application. In: Nanoscience And Nanotechnology. AIP Conference Proceedings, 1136 . Amer Inst Physics, USA, pp. 84-88. ISBN 978-0-7354-0673-5

Borghei, Amir Hossein (2012) Executive dashboard reports for public sector clients in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Borghei, Seyed Nima (2013) Determination of the influence of interface delamination on the elastic properties of fiber reinforced composite materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Boujarian, Sima, (2013) An enhanced chaotic encryption method for fragile watermarking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Bozorgi, M. and Maarof, M. A. and Sam, L. Z. (2011) Multi-classifier scheme with low-level visual feature for adult image classification. Communications in Computer and Information Science, 181 (3). pp. 793-802. ISSN 1865-0929

Braim, Krekar Saber (2015) Settlement of strip footing on sandy soil due to eccentricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Brown, E. R. and Hainin, M. R. and Cooley, L. A. (2005) Determining minimum lift thickness for hot mix asphalt (HMA) mixtures. Journal of the Association of Asphalt Paving Technologists, 74 . 23 -66. ISSN 0270-2932

Buang, Nor Aziah and Fadil, Fatirah and Abd. Majid, Zaiton and Sahhir, Shafinaz (2012) Characteristic of mild acid functionalized multiwalled carbon nanotubes towards high dispersion with low structural defects. Digest Journal of Nanomaterials and Biostructures, 7 (1). pp. 33-39. ISSN 1842-3582

Budiea, A. and Hussin, Mohd. Warid and Muthusamy, K. and Ismail, M. E. (2010) Performance of high strength POFA concrete in acidic environment. Concrete Research Letters, 1 (1). pp. 14-18. ISSN 2180-1371

Bujang, Ahmad Ariffian and Abu Zarin, Hasmah (2007) Harta tanah SGP 2113. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Bunawan, Aliff Ridzuan and Mahin, Mohd. Azrul Hisham and Hezmi, Muhammad Azril and Kassim, Azman and A. Rashid, Ahmad Safuan (2016) Development of slope monitoring device using accelerometer. Jurnal Teknologi, 78 (8-5). pp. 59-65. ISSN 0127-9696

Busu, Ibrahim (2006) Pengenalan kepada mekanisma cerapan penderia remote sensing. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Buyong, Taher (1995) GIS For Local Authorities. Buletin Ukur, 6 (1). pp. 61-68. ISSN 0128-4274

Buyong, Taher and Bong, Thai Kwong (1995) Penyarian data pelan akui melalui pengimbasan. In: Seminar Penyelidikan Fakulti Ukur Dan Harta Tanah, UTM (1995), 26 Julai 1995, Hyatt Regency Hotel, Johor Bahru.

Buyong, Taher and Tang, Chuoon Mun (1995) Computer software for generating digital cadastral databases. In: Seminar Penyelidikan 1995 Fakulti Ukur Dan Harta Tanah, UTM, 26 Julai 1995, Hyatt Regency Hotel, Johor Bahru.

Bhaskar Reddy, Ambavaram Vijaya and Yusop, Zulkifli and Jaafar, Jafariah and Aris, Azmi and Abdul Majid, Zaiton (2017) Simulation of a conventional water treatment plant for the minimization of new emerging pollutants in drinking water sources: process optimization using response surface methodology. RSC Advances, 7 (19). pp. 11550-11560. ISSN 2046-2069

C

Chae, Tyng Feng (2014) Developing a spreadsheet program in analysing continuous prestressed segmental box girders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Chang Sa'ar (2009) Dispute management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Teck Jung (2015) Strength properties of 10 mm timber clinker aggregate concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Chee Sin (2007) The effectiveness of construction equipment write - off policy in the royal engineer regiment (RER). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Hoe Cheong (2002) Flexural behaviour of reinforced concrete beams strengthened with CFRP plates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Kok Weng (2009) Effect of layeringon slope instability induced by rainfall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Kuen Ming (2003) Performance evaluation of licensed land surveyors in land administration in West Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Chan, Sook Huei (2009) Rippability assessment of quartzite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan , Zhi Han (2004) 3D simulation of extended end plate wind-moment connection of beam to unstiffened column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chandren, Sheela and Nur, Hadi and Mohamed, Nurul Najidah (2015) Synthesis of hierarchical porous Tio2/ averrhoa bilimbi catalyst for catalytic oxidation of styrene. In: 9th South East Asian Technical University Consortium (SEATUC) Symposium, 26-31 Jul, 2015, Thailand.

Chang, Chee Wei (1994) Stress-strain relationship for light red meranti glued layered timber short columns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chang, Hui Chung and Sun, Tao and Sultana, Naznin and Lim, Mim Mim and Khan, Tareef Hayat and Ismail, Ahmad Fauzi (2016) Conductive PEDOT:PSS coated polylactide (PLA) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) electrospun membranes: fabrication and characterization. Materials Science And Engineering C, 61 . pp. 396-410.

Chau, Khun Ma and Awang, Abdullah Zawawi and Omar, Wahid (2014) Slenderness effect and upper-bound slenderness limit of SSTT-confined HSC column. International Journal of Structural Engineering, 5 (3). pp. 279-286. ISSN 1758-7328

Chau, Kok Foo (2009) Reviewing the approval process flow of housing development in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ali, Mukhtar (2010) Development of quantitative quality cost matrix for Malaysian construction quality management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ali, Mukhtar and Md. Zin, Rosli and Abd Hamid, Zuhairi and Ayub, Abdul Rahman (2010) Quality cost in the construction industry-preliminary findings in Malaysia. The Journal of The Design and Build Environment , 6 . pp. 29-43. ISSN 1823-4208

Che Awang, M. Saupi and Subari, Mustafa Din (2005) Enhancement of local area DGPS accuracy: a composite approach. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Che Awang, Mohamad Saupi (1994) Kaedah Perhitungan Waktu Solat: Satu Tinjauan. Buletin Ukur, 5 (3). pp. 169-184. ISSN 0128-4274

Che Awang, Mohamad Saupi (2006) Prinsip-prinsip Astronomi lapangan. Documentation. Fakulti Ukur Dan Harta Tanah, Fakulti Ukur Dan Harta Tanah.

Che Awang, Mohamad Saupi and Kamarudin, Md. Nor (2007) Astronomy education in geomatics. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Che Hassan, Rozaimi and Mahmud, Razali (2005) Free broadcast DGPS service in marine: how good is it? In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 – 29.9.05., Pulau Pinang.

Che Mat, Nurulain and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah (2015) Performance of macro-clay on the porous asphalt mixture properties. In: International Conference on Green Chemical Engineering Technology, 24-25 Nov, 2015, Melaka, Malaysia.

Che Mohd. Zain, Nurul Hanani (2015) Customer satisfaction measurement towards improving project delivery for Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Norazman, Che Wan and Putra Jaya, Ramadhansyah and Dewi, Sri Jayanti and Abu Bakar, Badorul Hisham and Fadzil, M. A. (2014) Strength of concrete containing rice husk ash subjected to sodium sulfate solution via wetting and drying cyclic. Applied Mechanics and Materials, 534 . pp. 3-8. ISSN 1660-9336

Che Puan, Othman (2004) Driver's car following headway on single carriageway roads. Jurnal Kejuruteraan Awam, 16 (2). pp. 15-27. ISSN 0128-0147

Che Puan, Othman and Hainin, Mohd. Rosli (2008) Existence of dilemma zones at signalised intersections. In: Sustainable Transportation Systems and Seaport Operations. Penerbit UTM , Johor, pp. 18-31. ISBN 978-983-52-0572-9

Che Puan, Othman and Halim, Shafini and Ibrahim, Muttaka Na’iya (2015) Empirical evaluation of drivers’ operating speeds along curvatures on single carriageway roads. Jurnal Teknologi, 73 (4). ISSN 127-9696

Che Puan, Othman and Ibrahim, Muttaka Na’iya and Muhammad Nor, Nur Syahriza and Triana, Era (2014) Drivers decision model at an onset of amber period at signalised intersections. In: AFAP Conference on Current and Emerging Trends in Science and Engineering (ACCETSE 2014/5), 13 Sept, 2014, Surabaya, Indonesia.

Che Puan, Othman and Ismail, Che Ros (2010) Dilemma zone conflicts at isolated intersections controlled with fixed-time and vehicle actuated traffic signal systems. International Journal of Civil & Environmental Engineering, 10 (3). pp. 19-25. ISSN 2227-2763 (Print); 2077-1258 (Electronic)

Che Puan, Othman and Ismail, Che Ros and Hainin, Mohd. Rosli and Minhans, Anil and Muhamad Nor, Nur Syahriza (2015) Midblock U–turn facilities on multilane divided highways: an assessment of driver’s merging gap and stop delays. Jurnal Teknologi, 76 (14). pp. 1-8. ISSN 2180-3722

Che Puan, Othman and Muhamad Nor, Nur Syahriza and Bujang, Zamri (2014) Speed–flow–geometry relationships and capacity for two–lane single carriageway roads. Jurnal Teknologi, 70 (4). pp. 57-63. ISSN 0127-9696

Che Puan, Othman and Mustaffar, Mushairry and Ling, Tung Chai (2007) Automated pavement imaging program (APIP) for pavement cracks classification and quantification. Malaysian Journal of Civil Engineering, 19 (1). pp. 1-16. ISSN 1823-7843

Che Puan, Othman (Penterjemah) and Abd. Hamid, Ahmad Hilmy (Penterjemah) (1995) Pengenalan perancangan pengangkutan edisi ketiga. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0025–4

Che Puan, Othman and Hainin, Mohd. Rosli and Chik, Abdul Aziz and Ismail, Che Ros (2002) Driver's car following headway on single carriageway roads. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Che Razali, Mashitah and Rahmat, Mohd. Fua'ad and Abd. Wahab, Norhaliza (2012) Offline continuous measurement of particle size using electrostatic sensor. In: Process Tomography & Instrumentation -Series 9. CRC Press, pp. 409-447. ISBN 978-1-4398-6635-1

Che Sidik, Nor Azwadi and Safdari, Arman (2012) Comments on 'Lattice Boltzmann simulation of alumina-water nanofluid in a square cavity'. Nanoscale Research Letters, 7 (648). ISSN 1931-7573

Cheddad, Abbas and Setan, Halim and Majid, Zulkepli (2005) Disparity map calculation through epipolar lines estimation for 3D facial reconstruction. In: International Symposium & Exhibition on Geoinformation 2005, 27-29 Sept 2005, Penang, Malaysia.

Chee, Khoon Ng and Soon, Wah Loo and Yan, Phing Bong (2006) Reinforced concrete beams at ultimate flexural limit state: comparison of BS 8110 and Eurocode 2. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Chee, P. S. and Arsat, R. and He, X. and Kalantar-Zadeh, K. and Arsat, M. and Wlodarski, W. (2011) Polyvinylpyrrolidone/multiwall carbon nanotube composite based 36â°yx litao 3 surface acoustic wave for hydrogen gas sensing applications. AIP Conference Proceedings, 1341 . pp. 410-414. ISSN 0094-243X

Chek Jusoh, Chek Zainuddin (1997) Kajian ketetapan untuk pemetaan topografi dan pemilihan laluan menggunakan data stereo satelit spot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chelladurai, Leena (2008) Comparison of guidelines on forensic engineering practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chelliapan, Shreeshivadasan and Sallis, Paul (2008) Treatment of pharmaceutical wastewater by advanced oxidation process (AOP). In: Asian Water 2008 Conference -An International Conference on Water & Waste water, 2008, Kuala Lumpur, Malaysia.

Chelliapan, Shreeshivadasan and Wilby, Thomas and Sallis, Paul (2010) Treatment of pharmaceutical wastewater containing tylosin in an anaerobic-anaerobic reactor system. Water Practice and Technology, 5 (1). pp. 1-16. ISSN 1751-231X

Chen, Tet Khuan and Abdul Rahman, Alias (2006) 0D Feature In 3D Planar Polygon Testing For 38 Spatial Analysis. Geoinformation Science Journal , 6 (1). pp. 84-92. ISSN 1511-9491

Chen, Tet Khuan and Abdul Rahman, Alias (2007) 3D spatial operations in geo DBMS environment for 3D GIS. In: Computational Science and Its Applications – ICCSA 2007. Springer Berlin / Heidelberg, pp. 151-163. ISBN 978-3-540-74468-9

Chen, Tet Khuan and Abdul Rahman, Alias (2007) 3D solid buffering for 3D GIS. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor International Convention Centre,Johor Bahru, Johor.

Chen, Tet Khuan and Abdul Rahman, Alias (2007) 3D solids and their management in DBMS. In: Advances in 3D Geoinformation Systems. Springer, pp. 279-311.

Cheong, Lip Sing (2015) Flexural strength of fibre reinforced concrete under elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Cher, Siang Tan and Yee, Ling Lee and Mohammad, Shahrin and Siong, Kang Lim and Yeong, Huei Lee and Jee, Hock Lim (2015) Flexural behaviour of reinforced slab panel system with embedded cold-formed steel frames as reinforcement. Jurnal Teknolgi, 74 (4). pp. 39-44. ISSN 2180-3722

Chik, Abdul Aziz and Che Puan, Othman and Chai, Ming Jing (2004) Entry and circulating flow relationship at a roundabout. Jurnal Kejuruteraan Awam, 16 (1). pp. 48-60. ISSN 0128-0147

Chik, Abdul Aziz and Shankar, Ravi (1999) Estimating The Pass-By and Diverted Trips for Shopping Typed Land Use. Jurnal Kejuruteraan Awam, 11 (2). pp. 59-71. ISSN 0128-0147

Chin, Hong Neoh and Pui, Yi Yung and Zainon Noor, Zainura and Razak, Mohd. Hafizuddin and Aris, Azmi and Md. Din, Mohd. Fadhil and Ibrahim, Zaharah (2017) Correlation between microbial community structure and performances of membrane bioreactor for treatment of palm oil mill effluent. Chemical Engineering Journal, 308 . pp. 656-663. ISSN 1385-8947

Chiu, Chee Kwong (2003) Steel structure management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chizari, Hassan (2012) Delaunay triangulation-based global and local coverage measurement for wireless sensor networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Cho, Jian Yin (2011) Modification of Kahang clay soil with palm oil fuel ash (POFA) as potential landfill liner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choi, Sang Long and Wan Ismail, Wan Khairuzzaman (2011) Usage of HR technology: a future trend for HR professionals. International Journal of Physical Sciences, 5 (8). pp. 990-994. ISSN 1991-8178

Chong, Albert K. and Majid, Zulkepli and Setan, Halim and Ahmad, Anuar (2006) Advances in photogrammetry for digital hand surface capture in swimming performance study. In: International Symposium and Exhibition on Geoinformation 2006, 19-21 Sept 2006, Shah Alam, Selangor.

Chong, A. K. and Croft, Hayden and Majid, Zulkepli and Setan, Halim and Ahmad, Anuar (2005) A new technique for 3D measurment using 3D producer. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27-29.Sept. 2005, Pulau Pinang.

Chong, June Seng (2000) A design of a computerised aided tool for preventive maintenance modelling and validation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Chong, Ken Huat (2003) 3D interactive design system in construction industry from concurrent engineering prospective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Tun Yen (2009) Static lateral bracing to tall building structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Yee Horng (2012) Finite element analysis of corbel to beam connection under static load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choo, H. Pei and Juliza, J. and Abdul Rahim, Ruzairi and Mohd. Fadzil, Naizatul Shima and Md. Yunus, Yusri (2012) Wireless temperature sensors. In: Process Tomography & Instrumentation -Series 9. Penerbit UTM, Skudai, Johor, pp. 63-70. ISBN 978-967-354-189-8

Chow, Ming Fai (2011) Quantification and modeling of non-point source pollution in residential, commercial and industrial catchments. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Choy, Soon Tan and Marto, Aminaton and Makhtar, Ahmad Mahir and Siaw, Yah Chong and Pakir, Faizal (2015) Liquefaction resistance of sand matrix soils. Jurnal Teknologi, 77 (11). pp. 67-72. ISSN 2180-3722

Christophe, Theys and Theo E., Notteboom and Athanasios A., Pallis and Peter W., De Langen (2010) The economics behind the awarding of terminals in seaports: Towards a research agenda. Research in Transportation Economics, 27 . pp. 37-50. ISSN ISSN: 0739-8859

Chua , Jerry Kuo Sheng (2004) Classification of hard materials for contract documentation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chuan, Shuen Chuan and Setan, Halim and Majid, Zulkepli (2006) Three-dimensional craniofacial surface measurement: linear distance, angle and area computation. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Chuan, T. S. and Setan, Halim and Majid, Zulkepli (2004) Human face detection from color images: preliminary result. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Chum, Zhi Xian (2015) Isogeometric analysis of plane stress structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chuo, S. C. and Mohd. Setapar, S. H. and Ahmad, A. and Lokhat, D. (2016) New generation separation and identification methods for erythromycin. Der Pharmacia Lettre, 8 (19). pp. 215-222. ISSN 0975-5071

Colenbrander, S. and Gouldson, A. and Sudmant, A. H. and Papargyropoulou, E. and Chau, L. W. and Ho, C. S. (2016) Exploring the economic case for early investment in climate change mitigation in middle-income countries: a case study of Johor Bahru, Malaysia. Climate and Development, 8 (4). pp. 351-364. ISSN 1756-5529

Craig, R. F. and Marto, Aminaton (Penterjemah) and Mohd. Noor, Fatimah (Penterjemah) and Kasim, Fauziah (Penterjemah) (1993) Mekanik tanah edisi keempat. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–87–8

Crysdian, Cahyo (2001) Region-based digital image segmentation using pixel caste-mark and pixel discrimination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

D

D., Dwirianti-Hadiwinoto and Salim, M. R. and Ujang, Z. (2004) Polymerase chain reaction for identification of sulfate reducing bacteria species in membrane bioreactor. In: Environmental Biotechnology, Water and Environmental Management Series. IWA Publishing, London, pp. 173-184. ISBN 1843395037

Dabo Baba, Hammad (2010) Building information modeling in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daddy, Zemnan Titus William (2015) Barriers to adoption of ISO 14001 environmental management system by the Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dahrawi Edrus, Sakinah (2015) Increasing the adoption of project management best practices in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dalhatu, Saddiq Abubakar (2013) First principle DFT calculation for structural and electronic properties of magnesium indium sulphide and cadmium indium sulphide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Damayanti, A. and Salim, Mohd. Razman and Ujang, Zaini (2009) Finding of coefficients and oxidizable nitrogen from palm oil mill effluent (POME) for activated sludge models(ASMs). Malaysian Journal of Civil Engineering, 21 (1). pp. 32-41. ISSN 1823-7843

Damayanti, Alia and Salim, Mohd. Razman and Ujang, Zaini (2008) COD fractionation and yield coefficient determination from palm oil mill effluent for activated sludge models. In: Advances in Water and Wastewater Treatment Technologies. Penerbit UTM , Johor, pp. 148-159. ISBN 978-983-52-0580-4

Danial, O. and Salim, M. R. and Salmiati, Salmiati (2016) Nutrient removal of grey water from wet market using sequencing batch reactor [Penyingkiran nutrien air basuhan dari pasar basah mengguna reaktor kelompok urutan]. Malaysian Journal Of Analytical Sciences, 20 (1). pp. 142-148. ISSN 1394-2506

Danial, Omar and Salim, Mohd. Razman and Salmiati, Salmiati (2014) Nutrient removal in grey water from wet market using sequencing batch reactor. In: 27th Regional Symposium of Malaysia Analytical Sciences (SKAM), 8-10 Dec, 2014, Johor Bahru, Malaysia.

Darain, Kh. Mahfuz Ud and Jumaat, Mohd. Zamin Amin and Nazimuddin, S. M. and Ahsan, Amimul K. and Muhammad Rashid, Raizal Saifulnaz and A. Aziz, Md. Maniruzzaman and Obaydullah, M. and Saiful Islam, A. B. M. (2015) A review of the corrosion behavior of metallic heritage structures and artifacts. Jurnal Teknologi, 77 (1). pp. 95-100. ISSN 0127-9696

Darmansyah, Darmansyah (1999) Perbandingan penggunaan struktur keluli dan konkrit tetulang dalam pembinaan bangunan tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Darus, Rosheila and Md. Sam, Yahaya (2009) Modeling and control active suspension system for a full car model. In: Proceedings of 2009 5th International Colloquium on Signal Processing and Its Applications, CSPA 2009. Institute of Electrical and Electronics Engineers, New York, 13 -18. ISBN 978-142444150-1

Darwin, Norhadija and Abdul Hamid, Nurul Farhah and Udin, Wani Sofia and Mohd. Azhar, Noor Aniqah and Ahmad, Anuar (2015) Light weight rotary wing UAV for large scale mapping applications. In: Geospatial World Magazine, 24-28 Sept, 2015, Kuala Lumpur, Malaysia.

Darwish, Mohamad and Aris, Azmi and Puteh, Mohd. Hafiz and Abideen, Muzaffar Zainal and Othman, Mohd. Nor (2016) Ammonium-nitrogen recovery from wastewater by struvite crystallization technology. Separation and Purification Reviews, 45 (4). pp. 261-274.

Daryani, Khalil Effati and Mohamad, Hisham (2014) Reliability-based design of cantilever retaining walls embedded in granular soils. Numerical Methods in Geotechnical Engineering - Proceedings of the 8th European Conference on Numerical Methods in Geotechnical Engineering, NUMGE 2014, 1 . pp. 453-458.

Daud, Abdullah (1997) An implementation of the conjugate gradient method for cadastral survey adjustment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Daud, Kamaludin (2002) Kesesuaian ujian tanpa musnah untuk menilai kekuatan struktur konkrit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daud, Mohd. Effendi (1999) Strategi pemprosesan GPS berkejituan tinggi menggunakan perisian bernese versi 4.0 : kes kajian di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Daud, Mohd. Nor Siza (2015) Rehabilitating sewerage line system in congested urban area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Daud, Yusof and Lucas, Margaret and Jamaludin, Khairur Rijal (2012) Finite element modelling in ultrasonic sheet metal forming. Advanced Materials Research, 445 . pp. 1-8. ISSN 1022-6680

Daud, Abdullah (1990) The 3D Suite Computer Program. Buletin Ukur (1). pp. 55-56.

Daud, Dzulkarnian @ Dzulkarnain and Ahmad, Dzulkefli (2006) Prinsip-prinsip asas ejensi harta tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Daulay, Hasan and Abd. Rahman, Norhan and Mohd. Nasir, Kamarul Azlan (2000) Aquifer simulation model in Tioman Island. Jurnal Kejuruteraan Awam, 12 (2). pp. 33-46. ISSN 0128-0147

Daulay, Hasan Basyri and Abd. Rahman, Norhan and Mohd. Kassim, Amir Hashim and Mohd. Nasir, Kamarul Azlan (2001) Study On Water Resources In Tioman Island. Jurnal Teknologi F (34F). pp. 51-64. ISSN 0127-9696

Davide, Lo Presti and Abdul Hassan, Norhidayah and Airey, Gordon D. and Collop, Andrew (2013) Fundamental characterisation of reclaimed asphalts: the importance of testing homogeneous specimens. In: European Asphalt Technology Association Conference.

Davoudinejad, Ali and Ashrafi, Sina Alizadeh and Raja Hamzah, Raja Ishak and Niazi, Abdolkarim (2012) Experimental analysis of wear mechanism and tool life in dry drilling of AL2024. Advanced Materials Research, 566 . pp. 217-221. ISSN 1022-6680

Dawi, Stephanie Stella (2013) Occupational noise exposure among construction workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dawi Saifuddin, Munirah (2015) Sedimentation analysis at Sarawak Kanan River. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dehghani, Alireza (2012) Mechanical and thermal properties of Montmorillonite filled date palm leaf fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehghani, Mohammadreza (2013) Optimal design of water recovery network with improved operability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Demun, Amat Sairin (1994) Computerised calculations for water level and velocity variations in the surge tank system. Jurnal Kejuruteraan Awam, 7 (1). pp. 9-18. ISSN 0128-0147  

Demun, Amat Sairin (1994) Development of a computer programme for the design of municipal wastewater treatment facilities - Part 1 : the incoming conduit and screening faculty. Jurnal Kejuruteraan Awam, 7 (2). 1 - 11. ISSN 0128-0147

Demun, Amat Sairin (1995) Development of a computer programme for the design of municipal wastewater treatment facilities - Part 3: primary sedimentation. Jurnal Kejuruteraan Awam, 8 (2). pp. 16-25. ISSN 0128-0147

Demun, Amat Sairin (1996) Development of a computer programme for the design of municipal wastewater treatment facilities Part 5: secondary clarifier. Jurnal Kejuruteraan Awam, 9 (2). pp. 1-13. ISSN 0128-0147

Demun, Amat Sairin (1997) Development of a computer programme for the design of municipal wastewater treatment facilities Part 6: sludge thickening and blending facility. Jurnal Kejuruteraan Awam, 10 (1). pp. 26-41. ISSN 0128-0147

Demun, Amat Sairin (1997) Hidraulik saluran terbuka: dengan penggunaan komputer. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0066–1

Denan, F. and Osman, Mohd. Hanim and Saad, Sariffudin (2010) The study of lateral torsional buckling behavior of beam with trapezoid web steel section by experimental and finite element analysis. International Journal of Recent Research and Applied Studies (IJRRAS), 2 (3). pp. 232-240. ISSN 2349 - 4891

Denan, Fatimah and Osman, Mohd. Hanim and Saad, Sariffuddin (2010) The study of lateral torsional buckling behaviour of beam with trapezoid web steel section by experimental and finite element analysis. International Journal of Research and Reviews in Applied Sciences (IJRRAS), 2 (3). pp. 233-240. ISSN 2076-734X (Print); 2076-7366 (Online)

Denjkolaei, Ahmad Rahimi (2013) Improving modeling fault tolerance based on aspect-oriented design. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Dharam Singh, Ranjit Singh (1999) Pelarasan dan analisis jaringan pengawasan untuk pengesanan deformasi secara geometri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Dimon, Mohamad Ngasri (2002) Normal incidence sound transmission coefficient prediction of circular perforated panel using sound intensity technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Din , Usmuni (1999) Ukur kejuruteraan & hidrografi (Edisi 2). Documentation. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

Djati Utomo, Handojo (2008) Reducing copper toxicity by drinking coffee. In: WIT Transactions on Ecology and the Environment. WIT Press, United Kingdom, 199 -207. ISBN 978-184564114-6

Dodo, Joe D. and Kamarudin, Md. Nor (2007) The implementation of the global navigation satellite system (GNSS) in Nigeria: the challenges. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on GPS/GNSS 2007, 5-7 November 2007, Persada Johor International Convention Centre, Johor Bahru, Johor.

Dodo, Joe D. and Kamarudin, Mohd. Nor (2007) The iinfluence of different global tropospheric models on baseline precision in a local GPS network: case of the Malaysian Johor RTKnet. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Drahman, Siti Hasyyati (2015) Composite honeycomb core sandwich plate with facesheet indentation model subjected to low-velocity impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Drahman, Siti Hasyyati and Beng, Ahmad Hong Kueh and Zainal Abidin, Ahmad Razin (2015) Low-velocity impact of composite sandwich plate with facesheet indentation description. Jurnal Teknologi, 77 (16). pp. 1-7. ISSN 2180-3722

Draman @ Muda, Azah Kamilah (1999) Pengekstrakan ciri dan perangkaian aksara taip pelbagai variasi : kajian perbandingan antara teknik momen geometric tak varian, momen regular dan momen legendre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Dzinun, Hazlini and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Puteh, Mohd. Hafiz and A. Rahman, Mukhlis and Jaafar, Juhana (2017) Performance evaluation of co-extruded microporous dual-layer hollow fiber membranes using a hybrid membrane photoreactor. Desalination, 403 (SI). pp. 46-52. ISSN 0011-9164

E

Ebrahimi, Ali (2013) JPEG image tampering detection based on blocking artifacts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ebrahimi, Ebrahim and Monjezi, Masoud and Khalesi, Mohammad Reza and Armaghani, Danial Jahed (2016) Prediction and optimization of back-break and rock fragmentation using an artificial neural network and a bee colony algorithm. Bulletin of Engineering Geology and the Environment, 75 (1). pp. 27-36. ISSN 1435-9529

Ee , Lee Chuan (2010) Knowledge management in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Egba, E. I. and Bakhary, N. and Ismail, M. (2016) Influence of natural climate curing treatment on corrosion activity of reinforced concrete. Indian Journal of Science and Technology, 9 (46). ISSN 0974-6846

Ehsan, Abdul Haq (2014) Properties of self-compacting concrete incorporating palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eisazadeh, Amin E. (2015) Thermal characteristics of lime- and phosphoric acid-stabilized montmorillonitic and kaolinitic soils. Journal Of Thermal Analysis And Calorimetry, 121 (3). pp. 1239-1246. ISSN 1388-6150

Eissa, Tameem and Abd. Razak, Shukor and Ngadi, Mohd. Asri (2012) A novel lightweight authentication scheme for mobile ad hoc networks. Arabian Journal of Science and Engineering, 37 (8). pp. 2179-2192. ISSN 1319-8025

El Majri, Mustafa Musbah and Rahmat, Mohd. Fua'ad and Ibrahim, Sallehuddin (2012) Optical & electrodynamic sensors for dual modality tomography system. In: Process Tomography & Instrumentation -Series 9. Penerbit UTM, Skudai, Johor, pp. 147-154. ISBN 978-967-354-189-8

El-Fadil, Mohamed El-Byhagi and Gofar, Nurly (2008) Stability analysis of unsaturated slopes subjected to rainfall infiltration. Geotechnical & Highway Engineering .

El-Gelany Ismail, Mohamed Abdelkader (2009) Study on the properties of palm oil fiber. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

El-Hassan, Ahmed El-Tayeb Ahmed (2002) Realistic analysis and design of partially prestressed concrete beams using a non-linear approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

El-Jelani, Barkah Ali (2008) Water resources management in Libya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elageb Adaam, Alaadein Abdusalam (2012) Feasibility study on the implementation of medium rise industrialized building system (IBS) in Aleskan Alshaabi project in Khartoum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elfadil, Mohamed Elbyhagi (2007) Effect of soil permeability on the stability of slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elfghi, F. M. (2016) A hybrid statistical approach for modeling and optimization of RON: a comparative study and combined application of response surface methodology (RSM) and artificial neural network (ANN) based on design of experiment (DOE). Chemical Engineering Research and Design, 113 . pp. 264-272. ISSN 0263-8762

Elkhilani, Mohamed. E. Salem (2008) Global positioning system and geographic information system interation in the application of cadastre survey. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Elshiekh Omer, Mohamed Omer (2009) Properties of mortar with palm oil empty fruit bunch fibre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eltwati, Ahmed Salama (2015) Structural performance of asphalt blocks pavement as related to thickness, binder types, and joint width. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Embong , Samri (2010) Faktor-faktor kritikal yang mempengaruhi tempoh penyiapan projek-projek Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Endot, Ernyza and Setan, Halim and Md. Som, Z. A. (2004) Development of a low-cost software for 2D deformation detection in geodetic network. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Endud, Salasiah and Mohd. Nesfu, Nadirah Zawani (2012) Bimetallic basic catalyst comprising niobium and cesium supported on MCM-48 for the Claisen-Schmidt condensation. Advanced Materials Research, 545 . pp. 379-384. ISSN 1022-6680

Engkamat, Frauline (2009) The superintending officer's duties under JKR Sarawak form of contract PWD 75 (Ver.2006). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Eslaminejad, Mohammadreza and Abdul Razak, Shairah (2012) Fundamental lifetime mechanisms in routing protocols for wireless sensor networks: a survey and open issues. Sensors (Switzerland), 12 (10). pp. 13508-13544. ISSN 1424-8220

Evans, Ordiah Vans (2012) Evaluation of factors affecting the deformation behaviour of braced excavation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

F

Faiza, Bukenya (2012) Detecting floods using an object based change detection approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faizi, Koohyar and Armaghani, Danial Jahed and Momeni, Ehsan and Nazir, Ramli and Mohamad, Edy Tonnizam (2014) Uplift resistance of buried pipelines enhanced by geogrid. Soil Mechanics and Foundation Engineering, 51 (4). p. 195. ISSN 0038-0741

Fakharazi , Mohammad Faazil (2010) Kelewatan proses pengambilan tanah - kesan terhadap kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fallah, Iman Abbaszadeh (2010) Design consideration for motorist at urban four-arm signalize intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faradonbeh, R. S. and Armaghani, D. J. and Monjezi, M. and Mohamad, E. T. (2016) Genetic programming and gene expression programming for flyrock assessment due to mine blasting. International Journal of Rock Mechanics and Mining Sciences, 88 . pp. 254-264. ISSN 1365-1609

Faradonbeh, R. S. and Jahed Armaghani, D. and Monjezi, M. (2016) Development of a new model for predicting flyrock distance in quarry blasting: a genetic programming technique. Bulletin of Engineering Geology and the Environment, 75 (3). pp. 993-1006. ISSN 1435-9529

Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Amnieh, Hassan Bakhshandeh and Mohamad, Edy Tonnizam (2016) Prediction and minimization of blast-induced flyrock using gene expression programming and firefly algorithm. Neural Computing and Applications . pp. 1-13. ISSN 0941-0643 (In Press)

Fard, Khalil Mashalpour (2013) Mitigation of progressive collapse in concrete structure incorporating the GSA linear static procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faridmehr, Iman (2015) Seismic and progressive collapse assessment of new proposed steel connection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faridmehr, Iman and Ahmad, Yusof and Md. Tahir, Mahmood and Osman, Mohd. Hanim (2016) Cyclic and explosive evaluation of new proposed steel joint. Advances in Civil Engineering, 2016 . pp. 1-11. ISSN 16878-086

Faridmehr, Iman and Osman, Mohd. Hanim and Md. Tahir, Mahmood and Nejad, Ali Farokhi and Hodjati, Reza (2015) Seismic and progressive collapse assessment of sideplate moment connection system. Structural Engineering and Mechanics, 54 (1). pp. 35-54. ISSN 1225-4568

Faridmehr, Iman and Osman, Mohd. Hanim and Md. Tahir, Mahmood and Nejad, Ali Farokhi and Hodjati, Reza (2015) Severe loading assessment of modern and new proposed beam to column connections. Latin American Journal of Solids and Structures, 12 (7). pp. 1202-1223. ISSN 1679-7817

Faridmehr, Iman and Osman, Mohd. Hanim and Md. Tahir, Mahmood and Nejad, Ali Farokhi and Hodjati, Reza (2015) Severe loading assessment of modern and new proposed beam to column connections. Latin American Journal of Solids and Structures, 12 (7). pp. 1202-1223. ISSN 1679-7817

Faridmehr, Iman and Osman, Mohd. Hanim and Tahir, Mahmood Md. and Razavykia, Abbas and Nejad, Ali Farokhi (2016) Effect of web holes and bearing stiffeners on flexural-shear interaction strength of steel cold-formed C-channel sections. Latin American Journal of Solids and Structures, 13 (6). pp. 1152-1166. ISSN 1679-7817

Faried, M. and Shameli, K. and Miyake, M. and Hajalilou, A. and Kalantari, K. and Zakaria, Z. and Hara, H. and Khairudin, N. B. A. (2016) Synthesis of silver nanoparticles via green method using ultrasound irradiation in seaweed Kappaphycus alvarezii media. Research on Chemical Intermediates, 42 (12). pp. 7991-8004. ISSN 0922-6168

Farsangi, Ehsan Noroozinejad (2010) Seismic vulnerability analysis of various types of dams with finite element methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Farshchi, Iman (2009) Soil-root interaction and effect on slope stabilization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faruk Lawan, Umar (2015) Comparative study of fifty potential evapotranspiration models for urban area in tropical region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fashir, Hassan Hashim and A. Kadir, Abd. Majid (1998) Gravity Prediction from Anomaly Degree Variances. Buletin Geoinformasi, 2 (2). pp. 230-240. ISSN 1394-7702

Fatah, N. A. A and Triwahyono, S. and Jalil, A. A. and Ahmad, A. and Abdullah, T. A. T. (2016) N-Heptane isomerization over mesostructured silica nanoparticles (MSN): dissociative-adsorption of molecular hydrogen on Pt and Mo sites. Applied Catalysis A: General, 516 . pp. 135-143.

Fathaddin, Muhammad Taufiq and Awang, Mariyamni and Ardjani, Karnata (2008) A numerical study of pressure changes in dead-end pores. Vodohospodarsky Casopis/Journal of Hydrology and Hydromechanics, 56 (1). 23 -33. ISSN 0042-790X

Fathi, Mohamad Syazli (2000) The behaviour of interlocking loadbearing concrete block wall subject to concentric loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fathi, Mohamad Syazli and Abedi, Mohammad and Rambat, Shuib and Rawai, Shakila and Zakiyudin, Mohd. Zulakhmar (2012) Context-aware cloud computing for construction collaboration. Journal of Cloud Computing, 2012 . pp. 1-11. ISSN 2330-7889

Fathullah, M. and Abd. Rahim, Shayfull Zamree and Sharif, Safian and Shuaib, N. A. and Mat Saad, Mohd. Nasir (2011) A study on two plate and three plate mold of ultra thin plates in minimizing warpage issue. International Review of Mechanical Engineering (IREME), 5 (7). pp. 1189-1195. ISSN 1970-8734

Fazalul Rahiman, Mohd. Hafiz and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina (2011) Gas hold-up profiles measurement using ultrasonic sensor. IEEE Sensors Journal, 11 (2). pp. 460-461. ISSN 1530-437X

Fazli, Mohd. Kamil and Setan, Halim and Majid, Zulkepli (2007) Craniofacial Anthropometry : the comparison of accuracy between laser scanning and photogrammetry techniques. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Fazli, Mohd. Kamil and Setan, Halim and Majid, Zulkepli (2006) Craniofacial anthropometry: measurement comparison between contact and non-contact method. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Feiz Abadi, H. Karimi and Yusof, R. and Eshrati, S. Maryam and Naghib, S. D. and Rahmani, M. and Ghadiri, M. and Akbari, E. and Ahmadi, M. T. (2013) Current–voltage modeling of graphene-based DNA sensor. Neural Computing and Applications, 24 . pp. 85-89. ISSN 0941-0643

Feizabadi, Shahab Moeini (2014) Performance of sasobit modified asphalt binder in warm-mix asphalt technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fiedler, T. and Belova, I. V. and Ochsner, A. and Murch, G. E. (2011) Lattice Monte Carlo analysis of thermal diffusion in multi-phase materials. Advanced Structured Materials, 2 . pp. 275-300. ISSN 1869-8433

Firmawan, Ferry and Othman, Fadil and Yahya, Khairulzan and Haron, Zaiton (2016) The green construction site index (GCSI): a quantitative tool used to assess an ongoing project to meet the green construction concept. International Journal of Technology, 7 (4). pp. 530-543. ISSN 2086-9614

Firoozfar, Alireza Reza and Sajjadi, Seyed Mahdi and Mohd. Yunus, Mohd. Zulkifli and Beheshti, Seyed Amir Hossein and Mehmannavaz, Taha (2014) Pozzolanic materials role in enhancement of mechanical parameters of the dune sand. REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 44 (4). pp. 347-353. ISSN 1583-3186

Firouzi, Morteza and Shamsudin, Supiah and Nekooie, Mohammad Ali and Abd. Rahis, Abdul Jamil and Taherkhani, R. and Mohamad, Mohamad Ibrahim (2012) Pervious concrete texture analysis for infiltration rate evaluation. Advanced Science Letters, 13 (1). pp. 877-878. ISSN 1936-6612

Foroozesh, Behnaz (2012) Security features identification for CISCO routers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foroughi-Sabzevar, Mohsen (2009) Status of e-business implementation in the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foroutan, Amir (2013) Indentation study of honeycomb sandwich composite materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Foroutan, Maziar (2013) Coupling effect of suction variation on riverbank stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Forth, J. P. and Brooks, J. J. and Tapsir, Siti Hamisah (2000) The effect of unit water absorption on long-term movements of masonry. Cement and concrete composites , 22 (4). pp. 273-280. ISSN 0958-9465

Freier, D. and Muhammad Sukki, F. and Abu Bakar, S. H. and Ramirez Iniguez, R. and Abubakar MasUd, A. and Albarracín Sánchez, Ricardo and Ardila Rey, J. A. and Munir, A. B. and Mohd. Yasin, S. H. and Bani, N. A. (2016) Software simulation and experimental characterisation of a rotationally asymmetrical concentrator under direct and diffuse solar radiation. Energy Conversion and Management, 122 . pp. 223-238. ISSN 0196-8904

Fudhail, Abdul Munir and Azmi, M. I. M. and Mohamad Zin, Mohd. Rody and Salim, Mohd. Azli and Che Sidik, Nor Azwadi (2011) Application of lattice boltzmann method for lid driven cavity flow. International Review of Mechanical Engineering (IREME), 5 (5). pp. 856-861. ISSN 1970-8734

Fulazzaky, M. A. and Abdullah, S. and Salim, M. R. (2016) Supporting data for identification of biosurfactant-producing bacteria isolated from agro-food industrial effluent. Data in Brief, 7 . pp. 834-838. ISSN 2352-3409

Fulazzaky, Mohamad Ali (2012) Assessing the suitability of stream water for five different uses and its aquatic environment. Environmental Monitoring And Assessment . pp. 1-13. ISSN 0167-6369

Fulazzaky, Mohamad Ali and Abdul Salim, Nur Atikah and Abdullah, Noorul Hudai and Mohd. Yusoff, Abdull Rahim and Paul, Etienne (2014) Precipitation of iron-hydroxy-phosphate of added ferric iron from domestic wastewater by an alternating aerobic-anoxic process. Chemical Engineering Journal, 253 . pp. 291-297. ISSN 1385-8947

Fulazzaky, Muhamad Ali and Khamidun, Mohd. Hairul and Omar, Roslan (2013) Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models. Chemical Engineering Journal, 228 (n/a). pp. 1023-1029. ISSN 1385-8947

Fung, Wen Pui (2009) Load bearing autoclaved aerated concrete wall in industrialised building systems construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

G

Gan, Seng Kian (2002) The role of standard in controlling and rectifying problems : a study on UTM's stormwater management facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gan, Song Chiew (2013) Learning tool of image segmentation techniques for new learners. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ganiyu, Abideen Adekunle and A. Rashid, Ahmad Safuan and Osman, Mohd. Hanim (2016) Model test on the axial capacity of displacement ribbed piles. Jurnal Teknologi, 78 (8-5). pp. 39-45. ISSN 0127-9696

Ganiyu, Abideen Adekunle and A. Rashid, Ahmad Safuan and Osman, Mohd. Hanim (2016) Utilisation of transparent synthetic soil surrogates in geotechnical physical models: a review. Journal of Rock Mechanics and Geotechnical Engineering, 8 (4). pp. 568-576. ISSN 1674-7755

Ganjbakhsh, Hamed (2010) Building performance diagnoses using post occupancy evaluation for low energy office building practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

George, K. P. and Yusuf, Mohd. Zain (1981) Tunnel liner subjected to excavation loading. Jurnal Teknologi, 2 . pp. 41-50. ISSN 2180-3722 (electronic)

Gerusu, Geoffery James and Yusop, Zulkifli (2005) Bed load transport from a regenerated forest catchment in Sarawak. Jurnal Kejuruteraan Awam, 17 (2). pp. 69-72. ISSN 0128-0147

Gey, Eng Keat (2013) The effects of broadleaf carpet grasses (axonopus compressus) on shallow slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghalia, Mustafa Abu and Inuwa, Ibrahim and Hassan, Azman and Dahman, Yaser (2016) Viscoelastic behavior and mechanical properties of polypropylene/nano-calcium carbonate nanocomposites modified by a coupling agent. Macromolecular Research . pp. 1-11. ISSN 1598-5032 (In Press)

Ghanbari, Sasan Vosough (2013) Enhancement of the mechanical properties of stainless steel 316L for bio-medical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghanbaripanah, Afsaneh and Mustaffa, Mohamed Sharif and Ahmad, Roslee (2013) Structural analysis of family dynamics across family life cycle in Iran. In: 3rd World Conference On Psychology, Counseling And Guidance, WCPCG-2012.

Ghandvar, Hamidreza (2013) The wettability enhancement of SIC particles in cast aluminium A356 matrix composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghandvar, Hamidreza (2013) The wettability enhancement of SiC particles in cast aluminum a356 matrix composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghasan, Fahim Huseien and Mirza, Jahangir and Ismail, Mohammad and Hussin, Mohd Warid (2016) Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm oil fuel ash. Construction and Building Materials, 125 . pp. 1229-1240. ISSN 0950-0618

Ghavamian, Ali and Rahmandoust, Moones and Öchsner, Andreas (2012) A numerical evaluation of the influence of defects on the elastic modulus of single and multi-walled carbon nanotubes. Computational Materials Science, 62 . ISSN 0927-0256

Ghazali, Mohd. Izaan (2014) Mechanical properties of hybrid fibre reinforced composite concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gholami, M. and Mohd Sam, A. R. and Marsono, A. K. and Tahir, M. M. and Faridmehr, I. (2016) Performance of steel beams strengthened with pultruded CFRP plate under various exposures. Steel and Composite Structures, 20 (5). pp. 999-1022. ISSN 1229-9367

Gholami, Mehran and Mohd.Sam, Abdul Rahman and Mohamad Yatim, Jamaludin (2012) Assessment of bridge management system in Iran. In: Conference.

Ghosh, Pradip and Mohd. Yusop, Mohd. Zamri and Ghosh, Debasish and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2011) Direct fabrication of aligned metal composite carbon nanofibers on copper substrate at room temperature and their field emission property. Chemical Communications, 47 (16). pp. 4820-4822. ISSN 1359-7345

Ghoshal, Sib Krishna and Sahar, M. Rahim and Dousti, M. Reza and Arifin, Ramli and Rohani, M. Supar and Hamzah, Khaidzirh (2012) A model for enhanced up-conversion luminescence in erbium-doped tellurite glass containing silver nanoparticles. Advanced Materials Research, 501 . pp. 61-65. ISSN 1022-6680

Ghoshal, Sib Krishna and Sahar, Md. Rahim and Rohani, M. S. (2012) Excitonic contribution of nanosilicon on light emitting properties. Advanced Materials Research, 364 . pp. 308-312. ISSN 1022-6680

Giwangkara, Grawira Ganjur (2010) A study on marine sand as a jointing material for concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gofar, Nurly and Lee, Min Lee and Asof, Marwan (2006) Transient seepage and slope stability analysis for rainfall induced landslide: a case study. Malaysian Journal of Civil Engineering, 18 (1). pp. 1-13. ISSN 1823-7843

Gofar, Nurly and Lee, Min Lee and Kassim, Azman (2006) Effect of surface boundary condition on rainfall infiltration. Jurnal Teknologi B (44B). pp. 63-70. ISSN 0127-9696

Gofar, Nurly (2008) Geosynthetic reinforced soil structure. In: Ground Improvement & Stabilization. Penerbit UTM , Johor, pp. 106-134. ISBN 978-983-52-0573-6

Gofar, Nurly (2008) The study on the development of saturation profile in soil slope. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Gofar, Nurly and Lee, Lee Min (2009) PERISI: a computer program for preliminary evaluation of rainfall-induced slope instability. Malaysian Journal of Civil Engineering, 21 (2). pp. 235-240. ISSN 1823-7843

Gofar, Nurly and Lee, Min Lee and Kassim, Azman (2009) Extreme rainfall analysis for slope stability evaluation. In: Prediction and Simulation Methods for Geohazard Mitigation. CRC Press, Boca Raton, Florida, pp. 499-506. ISBN 978-041-58-0482-0

Gofar, Nurly and Mohamed, Rosdi (2008) Ground improvement by preloading and vertical drain. In: Ground Improvement & Stabilization. Penerbit UTM , Johor, pp. 53-70. ISBN 978-983-52-0573-6

Gofar, Nurly and Sutejo, Yulindasari (2007) Long term compression behavior of fibrous peat. Malaysian Journal of Civil Engineering, 19 (2). pp. 104-116. ISSN 1823-7843

Gofar, Nurly and Kassim, Khairul Anuar (2005) Study of compressibility characteristics of peat soil using large strain consolidometer. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Gofar, Nurly and Kassim, Khairul Anuar (2006) Determination of coefficient of rate of horizontal consolidation of peat soil. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Goh, Chun Seng and Shaikh Salleh, Sheikh Hussain and Jamaludin, Mohd. Najeb and Ismail, Kamarulafizam and Hamedi, Mahyar and Md. Noor, Alias (2012) Design and development of standalone DSP prototype for QT intercal processing and monitoring. Scientific Research and Essays, 7 (18). pp. 1813-1829. ISSN 1992-2248

Goh, Hweh Tze (2016) Null and void, inoperative or incapable of being performed of an arbitration agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Goh, Jessie Grace Poh Ling (2009) The use of contingent valuation method (willingness to pay) in an environmental assessment of a dredging project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Kee Keong (2002) Performance test on composite beam with trapezoid web profile (TWP) steel section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Kee Keong and Osman, Mohd. Hanim (2008) Performance test on simply supported composite beam with TWP steel section. In: Analysis, Design and Performance of Steel Section With Trapezoid Web. Penerbit UTM , Johor, pp. 56-67. ISBN 978-983-52-0575-0

Goh, Lee Hian (2002) Behaviour of columns on semi-rigid joint for unbraced frame bending on major axis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Lyn Dee (2015) Multistage artificial neural network in structural damage detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Lyn Dee and Bakhary, Norhisham and Abd. Rahman, Azlan and Ahmad, Baderul Hisham (2011) A comparison of artificial neural network learning algorithms for vibration-based damage detection. In: Advances in Structures. Trans Tech Publications, Switzerland, pp. 2756-2760. ISBN 978-087849206-0

Goh, Shu Wei (2003) Problems faced by local sub-contractor in public works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, W. I. and Mohamad, N. and Abdullah, R. (2013) Development of precast lightweight foamed concrete sandwich panel (PLFP) with double shear truss connector: an overview. In: Advanced Materials Research.

Goh, Yee Cai (2011) Method for determining optimum rain gauge network in a tropical urban catchment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goharian, Amirhossein and Rashidi, Ahmad Ramli and Abdul Kadir, Mohammed Rafiq and Abdullah, R. A. and Wahit, Mat Uzir (2011) Development of novel polymer composite beam using ultrasonic welding process for acetabular cup prosthesis. Key Engineering Materials, 471-47 . pp. 945-950. ISSN 1013-9826

Golzarpoor, Hamed (2010) Application of BIM in sustainability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gopalan, Thanath (2010) Performance prediction of prefabricated vertical drains beneath embankment on soft ground by finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gordan, Meisam (2014) Experimental investigation of passive tuned mass damper and fluid viscous damper on a slender two dimensional steel frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Govindasamy, Yuvabalan (2015) A study to enhance risk management practice in Jabatan Kerja Raya projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gu, Haosheng and Itoh, Yoshito (2006) Ageing effects on high damping bridge rubber bearing. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Gui, Hun Chuen (2007) Quality performance of ISO 9000/2001 certified contractors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gul, Aaiza and Gul, Taza and Khan, Ilyas and Islam, Saeed and Shafie, Sharidan (2015) Unsteady flow of a second grade fluid between two oscillating vertical plates. In: 3rd International Science Postgraduate Conference 2015 (ISPC 2015), 24-26 Feb, 2015, Johor Bahru, johor.

Guntor, Nickholas Anting and Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Iwao, Kenzo (2014) Thermal performance of developed coating material as cool pavement material for tropical regions. Journal of Materials in Civil Engineering, 26 (4). pp. 755-760. ISSN 0899-1561

Gurmukh Singh, Lakhbir Singh (2007) The delay at pre-tendering stage of projects in Accommodation and Works Directorate Ministry of Defense Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

H

H. Alrawi, Fatin Faris and Mohd. Ghazali, Mohd. Zulkifli and Mirasa, Abdul Karim (1999) Performance of tubular shape tall building. In: The 1999 International Conference on Tall Building and Urban Habitat, 1999, Kuala Lumpur.

Haddadiasl, Ahmad (2014) Effect of passive tuned mass damper and viscous damper in a slender two dimensional frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hadibarata, Tony and Kristanti, Risky Ayu and Toyama, Tadashi and Tanaka, Yasuhiro and Mori, Kazuhiro (2014) Sustainable removal of nitrophenols by rhizoremediation using four strains of bacteria and giant duckweed (Spirodela polyrhiza). Water, Air, and Soil Pollution, 225 (4). ISSN 1573-2932

Haikhal, T. Niki (2009) Comparison between marshall strength properties and rutting potential. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hailuddin, Huda Mastura (2012) Construction foreign labour skill drain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hainin, Mohd. Rosli (2000) Evaluation of indicator tests for identification of segregation in flexible pavements : a case study. Jurnal Kejuruteraan Awam, 12 (2). pp. 1-12. ISSN 0128-0147

Hainin, Mohd. Rosli and Brown, E. Ray (2006) Determination of maximum in place air void for impermeable hot mix asphaly pavement. Malaysian Journal of Civil Engineering, 18 (1). pp. 46-58. ISSN 1823-7843

Hainin, Mohd. Rosli (2007) The effects of temperature on the resilient modulus of flexible road pavement. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Hainin, Mohd. Rosli (2013) Steel slag utilization: prospects and challenges. In: GECON 2013, 2013.

Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and Adnan, Abbas Mukhtar and Abdul Hassan, Norhidayah and Jaya, Ramadhansyah Putra and Liu, Hong Y. (2013) A review on the performance of modified asphalt binder with tire rubber powder. In: A Joint Conference of International Conference in Geotechnical and Transportation Engineering (9th GEOTROPIKA) and International Conference of Innovative Construction and Buildings (1st ICONBUILD), 2013.

Hainin, Mohd. Rosli and Abdullah, Mohd. Ezree and Zamhari, Kemas Ahmad and Buhari, Rosnawati and Nayan, Mohd Nafarizal (2014) Short term and long term aging effects of asphalt binder modified with montmorillonite. Key Engineering Materials, 594-59 . pp. 996-1002. ISSN 1013-9826

Hainin, Mohd. Rosli and Ahmed, Ishtiaque and Ahmed, Bayes (2014) Road traffic accident characteristics in Dhaka, Bangladesh. Jurnal Teknologi, 71 (3). pp. 75-82. ISSN 0127-9696

Hainin, Mohd. Rosli and Oluwasola, Ebenezer and Brown, E. Ray (2016) Density profile of hot mix asphalt layer during compaction with various types of rollers and lift thickness. Construction and Building Materials, 121 . pp. 265-277. ISSN 0950-0618

Hainin, Mohd. Rosli and Oluwasola, Ebenezer Akin and A. Aziz, Md. Maniruzzaman and Yeroc, Suleiman Arafat (2016) Effect of moisture damage on gap-graded asphalt mixture incorporating electric arc furnace steel slag and copper mine tailings. Jurnal Teknologi, 78 (42554). pp. 1-9. ISSN 0127-9696

Hainin, Mohd. Rosli and Rusbintardjo, Gatot and Hameed, Mohd. Anwar Sahul and Abdul Hassan, Norhidayah and Md. Yusoff, Nur Izzi (2014) Utilisation of steel slag as an aggregate replacement in porous asphalt mixtures. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 67-73. ISSN 2180-3722

Hainin, Rosli and Niroumand, Hamed and Kassim, Khairul Anuar and Nazir, Rashid (2012) Fly ash as a sustainable and waste: material. Electronic Journal of Geotechnical Engineering, 17 HR . pp. 39-47. ISSN 1089-3032

Hajalilou, A. and Mazlan, S. A. (2016) A review on preparation techniques for synthesis of nanocrystalline soft magnetic ferrites and investigation on the effects of microstructure features on magnetic properties. Applied Physics A: Materials Science and Processing, 122 (7). ISSN 0947-8396

Hajihasani, N. and Bakhary, Norhisham (2011) Detection of concrete spalling using changes in modal flexibility. In: Advanced Materials Research. Trans Tech Publications, Switzerland, 2598 -2602. ISBN 978-087849206-0

Hajihasani, Nadia (2010) Detection of spalling using vibration data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hajihassani, Mohsen and Jahed Armaghani, Danial and Sohaei, Houman and Mohamad, Edy Tonnizam and Marto, Aminaton (2014) Prediction of airblast-overpressure induced by blasting using a hybrid artificial neural network and particle swarm optimization. Applied Acoustics, 80 . pp. 57-67. ISSN 0003-682X

Halipah, Hazwani (2014) Ergonomics awareness in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamad, Ahmed Wsoo (2014) Determination of rheological properties of cellulose oil palm fiber modified asphalt binder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamdi, Mohd. Maiziz Fishol (2007) Finite element investigation on the strength of semi-rigid extended end plate steel connection using Lusas software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamid, Roszilah and Mohamed, Ramizi and Mohd. Nayan, Khairul Anuar and Osman, Siti Aminah and Mohd. Yusof, Kamarudin (2006) Automatic mapping of concrete strength in structural element. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Hamidi, Behzad (2010) A green cost allocation model for office and commercial buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamidinezhad, Habib and Abdul-Malek, Zulkurnain and Wahab, Yussof (2012) Effects of gas pressure on the synthesis and photoluminescence properties of Si nanowires in VHF-PECVH method. Applied Physics A: Materials Science and Processing, 108 (3). pp. 739-744. ISSN 0947-8396

Hamidon, Nuramidah and Harun, Sobri and Abdul Malek, Marlinda and Ismail, Tarmizi and Alias, Noraliani (2015) Prediction of paddy irrigation requirements by using statistical downscaling and cropwat models: a case study from the Kerian irrigation scheme in Malaysia. Jurnal Teknologi, 76 (1). pp. 281-288. ISSN 0127-9696

Hamood Al Amri, Saif Sulaiman (2007) AFLAJ management in the Sultanate of Oman : case study of Falaj Al Khatmain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamood Alshameri, Badee Abdulqawi (2010) Engineering properties of older alluvium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, A. F. and Ibrahim, M. H. W. and Jamaluddin, N. and Jaya, R. P. and Arshad, M. F. and Zainal Abidin, N. E. and Manan, E. A. and Omar, N. A. (2016) Nomograph of self-compacting concrete mix design incorporating coal bottom ash as partial replacement of fine aggregates. Journal Of Engineering And Applied Sciences, 11 (7). pp. 1671-1675. ISSN 1816-949X

Hamzah, Ahmad Farhan and Wan Ibrahim, Mohd. Haziman and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Zainal Abidin, Norul Ernida (2015) Fresh properties of self-compacting concrete integrating coal bottom ash as a replacement of fine aggregates. In: 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Bali, Indonesia.

Hamzah, Harizah (2009) The potential of roof runoff as a solution for water scarcity problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamzah, Meor Othman and Omranian, Seyed Reza and Golchin, Babak and Hainin, Mohd. Rosli (2015) Evaluation of effects of extended short-term aging on the rheological properties of asphalt binders at intermediate temperatures using respond surface method. Jurnal Teknologi, 73 (4). pp. 133-139. ISSN 2180-3722

Hanapei, Md. Hisam (1998) Pemerhatian sifat dinamik dan kesan kerosakan oleh penguncupan gelembung peronggaan berhampiran sempadan pepejal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hani, Mohamed Khalil and Vishnu, P. Nambiar and Arif, Irwansyah (2009) An AES tightly coupled hardware accelerator in an FPGA-based Embedded processor core. In: Proceedings - 2009 International Conference on Computer Engineering and Technology, ICCET 2009. Article number 4769658, 2 . IEEE Explore, Singapore, pp. 521-525. ISBN 978-076953521-0

Haque, M. Nozibul and Keramat, Mumnunul and Shahid, Shamsuddin (2015) Groundwater resource evaluation in the western part of Kushtia district of Bangladesh using vertical electrical sounding technique. ISH Journal of Hydraulic Engineering, 21 (1). pp. 97-110. ISSN 0971-5010

Harahap, Mohamad Irwan Pandapotan (2004) Remedial works for a slope failure at the Faculty of mechanical Engineering, Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hares Wady, Shakhawan (2012) Enhancement of mobile IPV6 for handover latency using robust regression model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harirchian, Ehsan (2015) Constructability comparison between IBS and conventional construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Zaiton and Oldham, David and Yahya, Khairulzan and Zakaria, Rozana (2008) Application of A 2D Markovian approach to the modelling of sound propagation in streets. Malaysian Journal of Civil Engineering, 20 (2). 175 -187. ISSN 1823-7843

Haron, Alias (1993) Properties of laterised mortar and concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Nuryazmeen Farhan (2009) Hydrodynamic and salinity transport model in an estuarine system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Zaiton (1993) Design of one way reinforced concrete element to resist the effects of an accidental explosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Zaiton and Darus, Nadirah and Lim, Ming Han and Jahya, Zanariah and Abdul Hamid, Mohamad Fauzi and Yahya, Khairulzan and Lee, Yee Ling and Poi, Ngian Shek (2015) A preliminary study of occupational noise exposure among leaf blower and grass cutter workers in public university. Jurnal Teknologi, 77 (16). pp. 153-159. ISSN 0127-9696

Haron, Zaiton and Lim, Ming Han and Darus, Nadirah and Yee, Ling Lee and Jahya, Zanariah and Abdul Hamid, Mohamad Fauzi and Yahya, Khairulzan and Poi, Ngian Shek (2015) A preliminary study of environmental noise in public university. Jurnal Teknologi, 77 (16). pp. 145-151. ISSN 2180–3722

Haron, Zaiton and Oldham, David (2010) A markovian approach to the modeling of sound propagation in urban streets. Jurnal Teknologi, 52 . pp. 61-75. ISSN 2180-3722

Haron, Zaiton and Oldham, David and Yahya, Khairulzan and Zakaria, Rozana (2009) Modeling of sound propagation in urban streets containing trees using Markovian technique. Malaysian Journal of Civil Engineering, 21 (1). pp. 55-68. ISSN 1823-7843

Haron, Zaiton and Yahya, Khairulzan and Mohamad, Mohamad Ibrahim (2009) Probability approach for prediction of construction site noise. Journal of Asian Architecture and Building Engineering, 8 (2). pp. 571-577. ISSN 1346-7581

Haron, Zaiton and Yahya, Khairulzan and Oldham, David (2008) Construction site noise modelling using stochastic techniques. In: Issues in Construction Industry. Penerbit UTM , Johor, pp. 51-67. ISBN 978-983-52-0568-2

Harun, Sobri and Ahmat Nor, Nor Irwan and Mohd. Kassim, Amir Hashim (2002) Artificial Neural Network Model For Rainfall-Runoff Relationship. Jurnal Teknologi B (37B). pp. 1-12. ISSN 0127-9696

Harun, Sobri and Ahmat Nor, Nor Irwan and Mohd. Kassim, Amir Hashim (2001) Rainfall-runoff modelling using artificial neural network. Jurnal Kejuruteraan Awam, 13 (1). pp. 37-50. ISSN 1823-7843

Harun, Hasnida and Nor Anuar, Aznah (2014) Development and utilization of aerobic granules for the soy sauce wastewater treatment : optimization by response surface methodology. Jurnal Teknologi (Sciences and Engineering) . pp. 31-37.

Harun, Mohd. Hamidi (2014) Meshfree formulation of buckling of composite beam with slip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harun, Sobri (2007) An application of MLP neural nets for streamflow estimation. In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 2007, Riverside Kuching, Sarawak.

Harun, Sobri (2007) An assessment of changes in precipitation statistical characteristics on global climate change projections using statistical downscaling approaches. In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 6-8 June, 2007, Riverside Kuching, Sarawak.

Harun, Sobri (2007) Impact of climate change on precipation variability for Malaysia water resources and agriculture planning in 21st century. In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 2007, Riverside Kuching, Sarawak.

Harun, Sobri (2007) Optimization of tank model's parameters using global optimization methods (GOMs). In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 2007, Riverside Kuching, Sarawak.

Harun, Sobri (2007) Statistical downscalling of daily precipitation by regression method. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Harun, Sobri (2012) Urban drainage flood forecasting system. In: Proceedings 2nd International Conference On Water Resources (ICWR2012), 2012.

Harun, Sobri and Masimin, Masimin (2008) Extreme rainfall frequency analyses over the Banda Aceh Region. In: Stochastic Methods in Design Storm Estimations. Penerbit UTM , Johor, pp. 61-72. ISBN 978-983-52-0576-7

Hasan, M. A. F. M. R. and Keramat, M. M. and Shahid, S. and Yasmin, R. and Mohsenipour, M. and Sattar, G. S. (2016) Evaluation of subsurface lithologic units for groundwater exploration in the Barind Tract of Bangladesh. Geotechnical and Geological Engineering, 34 (5). pp. 1395-1411. ISSN 0960-3182

Hasan, Muhamad Khair (2010) Improving time estimation in JKR project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Muzamir and Abdullah, Amizatulhani and Marto, Aminaton (2010) The correlations and soil properties analysis of Temerloh, Pahang. Journal of Engineering and Technology, 1 (1). pp. 63-74. ISSN 2180-3811

Hasan, Muzamir and Marto, Aminaton and Hyodo, Masayuki and Makhtar, Ahmad Mahir (2011) The strength of soft clay reinforced with singular and group bottom ash columns. Electronic Journal of Geotechnical Engineering, 16 N . pp. 1215-1227. ISSN 1089-3032

Hasan, Salar Qader (2014) Detection of water leakage location by utilizing optical time domain reflectometery (OTDR) technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hasan, Siti Norazela (2010) Simulation of river embankment stability : a case study on failure and remedial method at Muar River, Panchor, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan Rhaif, Suhad (2014) Experimental investigation on partial discharge characteristics of epoxy-nanocomposite as hight voltage insulation material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hasan Sarkar, Md. Shamim (2015) Construction safety and management practices in Bangladesh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasanipanah, M. and Jahed Armaghani, D. and Khamesi, H. and Bakhshandeh Amnieh, H. and Ghoraba, S. (2016) Several non-linear models in estimating air-overpressure resulting from mine blasting. Engineering with Computers, 32 (3). pp. 441-455. ISSN 0177-0667

Hasanipanah, Mahdi and Jahed Armaghani, Danial and Bakhshandeh Amnieh, Hassan and Majid, Muhd. Zaimi Abd. and Tahir, Mahmood Md. (2016) Application of PSO to develop a powerful equation for prediction of flyrock due to blasting. Neural Computing and Applications . pp. 1-8. ISSN 0941-0643 (In Press)

Hasen, Rabee Abdaljaleel (2013) Properties of asphalt concrete incorporating grumb rubber produced through dry process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashemifard, S. A. and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2011) Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNT) as filler for gas separation: experimental. Journal of Colloid and Interface Science, 359 (2). pp. 359-370. ISSN 0021-9797

Hashemifard, S. A. and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2011) Mixed matrix membrane incorporated with large pore size halloysite nanotubes (HNTs) as filler for gas separation: morphological diagram. Chemical Engineering Journal, 172 . pp. 581-590. ISSN 1385-8947

Hashim, Abdul Manaf and Kasai, Seiya and Hashizume, Tamotsu and Hasegawa, Hideki (2005) Large modulation of conductance in Interdigital-Gated HEMT devices due to surface plasma wave interactions. Japanese Journal of Applied Physics, 44 . 2729-2734 . ISSN 00214922

Hashim, Halimmi (2007) The problems in the application of the micropile foundation system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, K. A. and Setan, Halim and Ahmad, Anuar and Maarof, Ismail (2005) 3D object modeling using AUSTRALIS and RHINOCEROS software. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Hashim, Maizon (2012) Contractor's standard of duty for design in traditional procurement system. In: The International 3rd Conference on Construction Industry, 2012.

Hashim, Noor Baharim (2007) Nearshore wave modelling for estuary of Sungai Batu Pahat. In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 2007, Riverside Kuching, Sarawak.

Hashim, Noor Baharim (2007) Sediment transport modeling of Sungai Pulai estuary. In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 2007, Riverside Kuching, Sarawak.

Hashim, Noor Baharim (1994) Short-term salinity predictions in back bay of biloxi, mississippi. Jurnal Kejuruteraan Awam, 7 (2). pp. 61-79. ISSN 0128-0147

Hashim, Noor Baharim (2007) Water quality modeling in Skudai River estuary: to ascertain the impact of sewage. In: International Conference On Water Management and Technology Applications In Developing Countries, 2007.

Hashim, Noor Baharim and Ismail, Maznah and Ying, Lee Tuan (2007) Hydrodynamic modeling of Sungai Johor estuary using EFDC. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Hashim, Noor Baharim and Shindala, Adnan and Zitta, Victor L (1999) Predicting elevations of water surface in a tidal water system. Jurnal Kejuruteraan Awam, 11 (1). pp. 80-95. ISSN 0128-0147

Hashim, Noor Baharim and Ibrahim, Zulkiflee and Huddleston, David H. and Ng, Boon Chong (2003) Hydraulic performance of high-velocity channels in flood-prone areas. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hashim, Wardati and Hainin, Mohd. Rosli and Ismail, Norfarah Nadia and Md. Yusoff, Nur Izzi and Abdullah, Mohd. Ezree and Abdul Hassan, Norhidayah (2016) Evaluating the cooling rate of hot mix asphalt in tropical climate. Jurnal Teknologi, 78 (4). pp. 97-104. ISSN 0127-9696

Hashim, Mazlan (1996) Image Classification with Higher-Dimension Watershed Classifier: A Test to Malaysian National Land Use Classification Scheme. Buletin Ukur, 7 (2). pp. 141-148. ISSN 0128-4274

Hashim, Mazlan (1988) A method for multi-dimensional image segmentation. In: 1988 ACSM-ASPRS Annual Convention, , 13-18March 1988, Saint Louis, MO; UNITED STATES.

Hashim, Mazlan and Abdullah, A'dell and Rasib, Abd Wahid (1997) Integration of Remote Sensing-GIS Techniques for Mapping and Monitoring Seagrass and Ocean Colour off Malaysian Coasts. Buletin Geoinformasi, 1 (3). pp. 134-138. ISSN 1394-7702

Hashim, Mazlan and Abdullah, Adeli and Rasib, Abd Wahid (1997) Integration of remote sensing-GIS Techniques for mapping Seagrass and Ocean Colour off Malaysian Coasts. Proceedings of Asian Conference on Remote Sensing 1997 .

Hashim, Mazlan and Abu Bakar, Abd Razak and Chek Jusoh, Chek Zainuddin and Ahmad, Samsudin (1992) Topographical Mapping from Stereo Satellite Data - Preliminary Findings. Proceeding of Asian Conference on Remote Sensing 1992 .

Hashim, Mazlan and Ahmad, Samsudin (1989) Consiraints and refinement of radiative transfer model for bathymetric mapping from satellite remotely sensed data. Proceedings of Asian Conference on Remote Sensing .

Hashir, Adilah (2010) Claim issues in structural failure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasim, Melani (2009) Effect of various types of traffic signal on red light running. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Adnan and Md. Yusof, Aminah and Omar, Ismail and Ong, Chee Tiong and Md. Nor, Norhazilan and Yahaya, Nordin (2007) Inspection data analysis for the assessment of corroded pipelines. In: Marine Science and Technology Seminar 2007, 2007, Hotel Istana, Kuala Lumpur Malaysia.

Hassan, Ahmad Raad (2014) Determination of rheological properties of modified asphalt binder incorporating with sasobit additive. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Azman and Imran, Muhammad and Wahit, Mat Uzir and Balakrishn, Harintharavimal (2011) Recent developments in PA6/PP nanocomposites. Key Engineering Materials, 471-47 . pp. 7-19. ISSN 1013-9826

Hassan, Azman and Mohd. Yusoff, Noor Izyan Syazana and Abu Bakar, Aznizam (2012) Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites. Journal of Polymer Engineering, 32 . pp. 275-282. ISSN 0334-6447

Hassan, Azmi (1999) GPS goes to Hollywood. Buletin Geoinformasi, 3 (1). pp. 80-81. ISSN 1394-7702

Hassan, I. O. and Ismail, M. and Noruzman, A. H. and Yusuf, T. O. and Mehmannavaz, T. and Usman, J. (2013) Characterization of some key industrial waste products for sustainable concrete production. In: Material Design, Processing And Applications, Parts 1-4.

Hassan, Ibrahim (2015) Spatial and temporal modeling of regional groundwater level in context of climate change. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Ismail (1993) Analisis plastik dan teori garis alah. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–84–3

Hassan, Norhasmi (2009) Recovery and recycling processes of scheduled waste in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Norlizawati (2015) Shear strength parameters of improved organic soil by calcium base stabilizer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Sitti Asmah and Wong, Lavine and Mashros, Nordiana and Mohammed Alhassan, Hashim and Abdul Sukor, Nur Sabahiah and Rohani, Munzilah and Minhans, Anil (2016) Operating speed of vehicles during rainfall at night: case study in Pontian, Johor. Jurnal Teknologi, 78 (7-2). pp. 9-18. ISSN 0127-9696

Hassan, Zulkarnain (2012) Climate change impact on precipitation and streamflow in a humid tropical watershed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Zulkarnain and Harun, Sobri (2012) Application of statistical downscaling model for long lead rainfall prediction in Kurau River catchment of Malaysia. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 1-12. ISSN 1823-7843

Hassan Mohamad, Azrinda and Kamarudin, Md. Nor (2005) Flood plain simulation model by integration of surveying packages and GIS. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World, 27-29 September2005, Pulau Pinang.

Hassan Shuaibu, Abdulrahman (2012) Determining the impact of volume to capacity ratio on travel time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Azmi (1991) Pembentukan Pustaka Rutin Pemprosesan Imej Digital. Buletin Ukur, 2 (2). pp. 56-61. ISSN 0128-4274

Hassan, Azmi (1998) Pseudo Randomized Search Strategy (PRSS*) of the ambiguity function mapping. Buletin Geoinformasi, 2 (2). pp. 241-248. ISSN 1394-7702

Hassanabadi, Mahmoud Shakouri (2012) Design optimization for energy consumption in residential buildings through building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassani, Mohsen and Armaghani, Danial Jahed and Marto, Aminaton and Mohamad, Edy Tonnizam (2015) Ground vibration prediction in quarry blasting through an artificial neural network optimized by imperialist competitive algorithm. Bulletin of Engineering Geology and the Environment, 74 (3). pp. 873-886. ISSN 1435-9529

Hassani, Mohsen and Marto, Aminaton and Khezri, Nima and Kalatehjari, Roohollah (2015) Indirect measure of thermal conductivity of rocks through adaptive neuro-fuzzy inference system and multivariate regression analysis. Measurement: Journal of the International Measurement Confederation, 67 . pp. 71-77. ISSN 0263-2241

Hatami, Somaieh (2015) Ultimate behaviour of reinforced concrete shear walls with octagonal openings. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heidari, M. and Abdul Kadir, M. R. and Fallahiarezoodar, A. and Alizadeh, M. (2011) Stress distribution analysis on semi constrained elbow prosthesis during flexion and extension motion. IFMBE Proceedings, 35 . pp. 215-218. ISSN 1680-0737

Hekmat, Ali and Mohd. Yassin, Airil Yasreen and Yusop, Zulkifli and Kashefizadeh, Mohammad Hossein (2015) Weak imposition of essential boundary conditions in isogeometric analysis of depth averaged advection dispersion equation. Journal of Applied Sciences, 15 (2). pp. 184-194. ISSN 1812-5654

Hendriyawan, Hendriyawan (2007) Seismic macrozonation of peninsular Malaysia and microzonation of Kuala Lumpur City Center and Putrajaya. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Hermanto, Budi (2010) Schedule risk analysis in offshore development project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heryansyah, Arien and Askari, Muhamad and Harun, Sobri and Yusop, Zulkifli and Syafiuddin, Achmad and Setiawan, Budi Indra and Mohd. Dom, Norlida and Rudiyanto, Rudiyanto and Zainal Abidin, Mohamed Roseli (2015) Numerical simulation of potential cumulative infiltration in tropical soils with macropore. In: International Seminar on Science of Complex Natural Systems (ISS-CNS), 9-10 Oct, 2015, Indonesia.

Hezmi, Muhammad Azril and Sa'ari, Radzuan and Mustaffar, Mushairry and Ismail, Che Ros and Mohd. Amin, Mohd. For and Hanapi, Muhammad Nassir and Yahya, Khairulzan and Ahmad, Yusof and Mohamed, Azman and Mohd. Yunus, Nor Zurairahetty and Minghat, Asnul Dahar and Jusoh, Siti Norafida and Ishak, Mohd. Yunus and Mohd. Yunus, Mohd. Zulkifli (2015) Implementation of project based learning for civil engineering students at Universiti Teknologi Malaysia. In: Proceedings of 9th Asia Pacific Structural Engineering and Construction Conference (APSEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Hezmi, Muhammad Azril and Sa'ari, Radzuan and Mustaffar, Mushairry and Ismail, Che Ros and Mohd. Amin, Mohd. For and Hanapi, Muhammad Nassir and Yahya, Khairulzan and Ahmad, Yusof and Mohamed, Azman and Mohd. Yunus, Nor Zurairahetty and Minghat, Asnul Dahar and Jusoh, Siti Norafida and Ishak, Mohd. Yunus and Mohd. Yunus, Mohd. Zulkifli (2015) Implementation of project based learning for first year civil engineering student at Universiti Teknologi Malaysia. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Hezmi, Muhammad Azril and Zahari, Mohd. Zakri and Sa’ari, Radzuan (2013) Preliminary study on water retention behaviour of compacted koalin. In: The 9th International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), 2013.

Hezmi, Muhammad Azril (2002) Keupayaan galas lapisan tanah distabil kapur melapisi lapisan tanah lembut. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hidayah, Nurul and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Abdullah, Mohd. Ezree (2013) A short review of waste oil application in pavement materials. In: A Joint Conference of International Conference in Geotechnical and Transportation Engineering (9th GEOTROPIKA) and International Conference of Innovative Construction and Buildings (1st ICONBUILD), 2013.

Hiew, Thong Yap and Su, Kong Ngien and Othman, Norasman and Ahmad Abdul Ghani, Nadiatul Adilah and Abd. Rahman, Norhan (2017) Parametric investigation in Malaysian separate sewer systems. Municipal Engineer, 170 (2). pp. 90-96. ISSN 0965-0903

Hii, How Nguong (2007) Influence of concrete strength on the behavior of external reinforced concrete beam-column joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hii , Jing Song (2004) Nonlinear finite element analysis of the precast concrete beam-to-column connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hirman, Hasnita (2009) Performance of full scale embankment of soft clay reinforced with bamboo geotextile composite at the interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hisam Omar, Abdullah and Jamil, Hasan and Mohamed Zin, Ahmad (2007) Multipurpose cadastre: effectiveness and upgrading of GIS layer management system (GLMS). In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Hisham, Abdullah and Bachok, Amran (2005) Intelligence based cadastral database selection and visualization system: concepts and prototype. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Hisham, Mohamad and Soga, Kenichi and Amatya, Binod L. (2014) Thermal strain sensing of concrete piles using brillouin optical time domain reflectometry. Geotechnical Testing Journal, 37 (2). ISSN 0149-6115

Ho, C. S. L. and Horiuchi, T. and Taniguchi, H. and Umetsu, A. and Hagisawa, K. and Iwaya, K. and Nakai, K. and Azmi, A. and Zulaziz, N. and Azhim, A. and Shinomiya, N. and Morimoto, Y. (2016) Fluorescence multispectral imaging-based diagnostic system for atherosclerosis. BioMedical Engineering Online, 15 (1). ISSN 1475-925X

Ho, Jin How and Abdul Rahman, Azlan (2004) Life cycle cost analysis case study on corrosion remedial measures for concrete structures. Jurnal Teknologi B (40B). pp. 15-26. ISSN 0127-9696

Ho, Lih Sun (1998) Corrosion protection reinforcement in concrete using galvanized steel bar and blended cements. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hock, Cheong Jun Quan (2015) Fitting soil-water characteristic curve by using unimodal and bimodal soil physical properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Honesti, Leli and Abd. Majid, Muhd. Zaimi and Djali, Nazwar and Muchlian, Meli (2015) Modeling the potential risk of building vulnerability towards tsunami hazard in Ulak Karang and Pasir Jambak sub-district, Padang. Jurnal Teknologi, 72 (4). pp. 41-47. ISSN 2180-3722

Hong, Ahmad Kueh Beng and Md Tahir, Mahmood and Mohammad, Shahrin and Ngian, Shek Poi and Siang, Tan Cher (2011) Experimental investigation on locally produced cold- formed steel sections for root truss system. In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Hong, Kai Sze and Shaikh Salleh, Sheikh Hussain (2004) Design of educational software for automatic speech recognition (asr) techniques. Jurnal Teknologi (40D). pp. 133-144. ISSN 2180-3722

Hossain, M. Z. and Sakai, T. (2006) Flexural behavior of carbon fiber cement composites. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5 – 6 September 2006, Kuala Lumpur, Malaysia. (Submitted)

Hossain, M. Z. and Sakai, T. (2006) Flexural behavior of carbon fiber cement composites. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Hossain, Imam and Shekaili, N. K. and Wagiran, Husin (2015) Thermoluminescence Response of Copper-Doped Potassium Borate Glass Subjected to 6 Megavolt X-Ray Irradiation. Journal of Applied Spectroscopy, 82 (1). pp. 149-152. ISSN 2189-9510

Hossain, M. Bellal and Abdul Awal, A. S. M. (2012) Mechanical properties and durability of some selected timber species. Malaysian Journal of Civil Engineering, 24 (1). pp. 67-84. ISSN 1823-7843

Hossain, M. Z. and Abdul Awal, A. S. M. (2010) A study on flexural modulus and ductility of laminated cementitious composites. Malaysian Journal of Civil Engineering, 22 (2). pp. 216-226. ISSN 1823-7843

Hossein, Aslani (2013) Influence of chemical and mineral admixtures on shrinkage and creep of prepacked aggregate concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hossein, Imam and Sharip, N. and Viswanathan, K. K. (2012) Efficiency and resolution of HPGE and NAI(TI) detectors using gamma-ray spectroscopy. Scientific Research and Essays, 7 (1). pp. 86-89. ISSN 1992-2248

Hosseini, P. and Mohamad, M. I. and Nekooie, M. A. and Taherkhani, R. and Booshehrian, A. (2011) Toward green revolution in concrete industry: the role of nanotechnology (a review). Australian Journal of Basic and Applied Sciences, 5 (12). pp. 2768-2782. ISSN 1991-8178

Hosseini, Seyed Jamal Aldin and Abd. Rahman, Ahmad Baharuddin (2016) Effects of spiral confinement to the bond behavior of deformed reinforcement bars subjected to axial tension. Engineering Structures, 112 . pp. 1-13. ISSN 0141-0296

Hosseini, Seyed Jamal Aldin and Koushfar, Kiarash and Abdul Rahman, Ahmad Baharuddin and Razavi, Meisam (2014) The bond behaviour in reinforced concrete, state of the art. Cement Wapno Beton, 19 (2). 93-+. ISSN 1425-8129

Hosseinian, Seyyed Shahab and Jabbrani Torghabeh, Zahra and Ressang, Aziruddin (2013) Relative importance of factors affecting construction hazards in the design phase. In: Applied Mechanics and Materials (Volume 330).

Huan, Tuong Ying (2002) Flexural capacity of corrugated web girders with H-section flange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Gani, Paran (2016) Effect of kaolin particle size and loading on the characteristics of kaolin ceramic support prepared via phase inversion technique. Journal of Asian Ceramic Societies, 4 (2). pp. 164-177. ISSN 2187-0764

Huseien, G. F. and Mirza, J. and Ismail, M. and Hussin, M. W. (2016) Influence of different curing temperatures and alkali activators on properties of GBFS geopolymer mortars containing fly ash and palm oil fuel ash. Construction and Building Materials, 125 . pp. 1229-1240. ISSN 0950-0618 (In Press)

Huseien, G. F. and Mirza, J. and Ismail, M. and Hussin, M. W. and Ariffin, M. A. M. (2016) Potential use coconut milk as alternative to alkali solution for geopolymer production. Jurnal Teknologi, 78 (11). pp. 133-139. ISSN 0127-9696

Huseien, Ghasan Fahim and Mirza, Jahangir and Ariffin, Nur Farhayu and Hussin, Mohd. Warid (2015) Synthesis and characterization of shelf-healing mortar with modified strength. Jurnal Teknologi, 76 (1). pp. 195-200. ISSN 0127-9696

Huseien, Ghasan Fahim and Mirza, Jahangir and Ismail, Mohammad and Ghoshal, Sib Krishna and Ariffin, Mohd. Azreen Mohd. (2016) Effect of metakaolin replaced granulated blast furnace slag on fresh and early strength properties of geopolymer mortar. Ain Shams Engineering Journal . ISSN 2090-4479 (In Press)

Husin, Khairul Anwar and Md. Nor, Hasanan (2002) Kajian terhadap penguncian turapan blok konkrit. Jurnal Kejuruteraan Awam, 14 (2). pp. 53-65. ISSN 1823-7843

Hussein, Dler Hassan (2015) Behaviour of rubberized asphalt mixture subjected to thermal loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein, Shwan Hassan and Mohamed Murid, Ali Hassan and Ismail, Munira and Muminov, Mukhiddin I. (2015) Solving Robin problems in bounded doubly connected regions via an integral equation with the eneralized Neumann Kernel. In: Simposium Kebangsaan Sains Matematik ke-23, 22-24 Feb, 2015, Johor Bahru, Johor.

Hussein Amran, Mugahed Yahya (2013) The mechanism of failure of structural lightweight concrete infill of IBS blocks subjected to flexural. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein Jibril, Abdrahman (2012) Development of jamming method for policy enforcement in wireless campus environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Md. Azman (2001) Prestasi sambungan pada paksi major menggunakan keratan keluli tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Mohd. Warid (2007) High strength and high performance blended cement concrete (keynote address). In: 1st Construction Industry Research Achievement International Conference (CIRAIC 2007), 2007, PWTC,KL.

Hussin, Mohd. Warid and A. Khalid, Nur Hafizah and Ismail, Mohammad and A. Ismail, Mohamed and Mohamed, Azman and A. Rashid, Ahmad Safuan and Ariffin, Nur Farhayu and Abdul Shukor Lim, Nor Hasanah and Samadi, Mostafa (2015) Polymer concrete to normal concrete bond strength: Mohr-Coulomb theory. Jurnal Teknologi, 77 (16). pp. 27-32. ISSN 2180–3722

Hussin, Mohd. Warid and Abdul Shukor Lim, Nor Hasanah and Mohd. Sam, Abdul Rahman and Ismail, Mohamed A. and Samadi, Mostafa and Ariffin, Nur Farhayu and Abd. Khalid, Nur Hafizah (2015) Long term studies on compressive strength of high volume ultrafine palm oil fuel ash mortar mixes. In: 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Hussin, Mohd. Warid and Abdul Shukor Lim, Nor Hasanah and Mohd. Sam, Abdul Rahman and Samadi, Mostafa and Ismail, Mohamed A. and Ariffin, Nur Farhayu and Khalid, Nur Hafizah A. and Abd. Majid, Muhd. Zaimi and Mirza, Jahangir and Lateef, Habeeb (2015) Long term studies on compressive strength of high volume nano palm oil fuel ash mortar mixes. Jurnal Teknologi, 77 (16). pp. 15-20. ISSN 2180-3722

Hussin, Mohd. Warid and Abdullah, Khairunnisa (2009) Properties of palm oil fuel ash cement based aerated concrete panel subjected to different curing regimes. Malaysia Journal of Civil Engineering, 21 (1). pp. 17-31. ISSN 1823-7843

Hussin, Mohd. Warid and Bhutta, Muhammad Aamer Rafique (2011) Mix design and compressive strength of geopolymer concrete containing blended ash from agro-industrial wastes. In: Advanced Manufacturing Systems. Advanced Materials Research, 339 . Trans Tech Publications, Switzerland, pp. 452-457. ISBN 978-303785249-1

Hussin, Mohd. Warid and Khalid, Nur Hafizah A. and Ismail, Mohammad and Ismail, Mohamed A. and Mohamed, Azman and Ariffin, Nur Farhayu and Abdul Shukor Lim, Nor Hasanah and Samadi, Mostafa (2015) Normal concrete to polymer concrete bond strength: mohr-coulomb theory. In: 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Hussin, Mohd. Warid and Mohd. Ariffin, Mohd. Azreen (2012) Chloride resistance of blended ash geopolymer concrete (chloride resistance & microstructural analysis). In: Conference.

Hussin, Mohd. Warid (2007) Blended cement concrete - potential without misuse. In: Syarahan Perdana Profesor - Siri 30, 2007, Johor Bahru.

Hussin, Mohd. Warid (Penterjemah) and Zakaria, Fadhadli (Penterjemah) and Salleh, Othaman (Penterjemah) and Mohamad, Mohd. Sazali (Penterjemah) (2000) Rencam bersimen bertetulang gentian. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0183–8

Hussin, Noorsubha (2015) Determination of failure zone of vane shear test using artificial transparent soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

I

Ibrahim, Zulkiflee and Abdul Latiff, Ab. Aziz and Ab. Halim, Azrul Hanif and Abu Bakar, Norlela and Subramaniam, Sivadas (2008) Experimental studies on mixing salt wedge estuary. Malaysian Journal of Civil Engineering, 20 (2). pp. 188-199. ISSN 1823-7843

Ibrahim, Ab. Latif and Masron, Tarmiji and Abdul Majid, Aziz and Mohd. Hassan, Aida Hayati and Abdullah @ Ishak, Nor Adina and P. Ramli, Mohd. Hilmi and Abd. Rahman, Mohd. Zulkarnain (2005) Penggunaan Data Satelit NOAA-AVHRR Dalam Mengukur Ketinggian Suhu Bandar-bandar Utama Di Malaysia. Jurnal Perniagaan & Sains Sosial (11). ISSN 1394-4547

Ibrahim, Abd. Latif and Hashim, Mazlan and Ali, Mohamad Idris and Rasib, Abd. Wahid and Wan Kadir, Wan Hazli and Sumari, Mohd. Razif and Haron, Khalid (2003) Detecting malaysian jurnal of real estateand mapping nutrients concentration in oil palm plantation using remote sensing and geographic information system. In: Proceedings of Agriculture Conference, 24-28 August 2003, Putrajaya Marriott Hotel.

Ibrahim, Faizah (2010) Improving the process of capturing clients’ needs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, I. S. and Elliott, K. S. and Abdullah, R. and Kueh, A. B. H. and Sarbini, N. N. (2016) Experimental study on the shear behaviour of precast concrete hollow core slabs with concrete topping. Engineering Structures, 125 . pp. 80-90. ISSN 0141-0296

Ibrahim, Izni S. and Kim, S. Elliott and Copeland, Simon (2008) Bending capacity of precast prestressed hollow core slabs with concrete toppings. Malaysian Journal of Civil Engineering, 20 (2). pp. 260-283. ISSN 1823-7843

Ibrahim, Izni Syahrizal and Osman, Mohd. Hanim and Usman, Fathoni (2008) Buckling analysis of plate girder with trapezoid web subjected to shear loading. In: Analysis, Design and Performance of Steel Section With Trapezoid Web. Penerbit UTM , Johor, pp. 1-11. ISBN 978-983-52-0575-0

Ibrahim, Izni Syahrizal and Saim, A. Aziz and Abd. Rahman, Ahmad Baharuddin and Sarbini, Noor Nabilah and Harun, Nur Farhana and Hasbullah, Nurul Nadia (2014) Shear capacity of composite slab reinforced with steel fibre to that of fabric reinforcement in concrete topping. Materials Research Innovations, 18 . S6236-S6240. ISSN 1432-8917

Ibrahim, Izni Syahrizal and Wan Jusoh, Wan Amizah and Mohd. Sam, Abdul Rahman and Mustapa, Nur Ain and Sk. Abd. Razak, Sk. Muiz (2015) The mechanical properties of steel-polypropylene fibre composites concrete (HyFRCC). In: International Integrated Engineering Summit (IIES) 2014, 1-4 Dec 2015, Batu Pahat, Johor.

Ibrahim, Md. Zin (2002) Analisa spektrum kejutan terhadap papan gelugur sebagai bahan pengkusyenan pembungkus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mohamud Abdirahman (2013) Finite element modeling of composite plates with total imperfect interface subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Mohd. Sharuddin and Setan, Halim (2007) Digital stereo close range videogrammetry for high accuracy 3D measurement motion tracking system. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor International Convention Centre,Johor Bahru, Johor.

Ibrahim, Mohd. Sharuddin and Setan, Halim (2004) Procedure for deformation detection using visual metrology. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Ibrahim, Mohd. Sharuddin and Setan, Halim and Chong, Albert K. (2006) A review: digital stereo close range videogrammetry for three dimensional measurements. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Ibrahim, Mohd. Sharuddin and Setan, Halim and Majid, Zulkepli (2005) Fast 3D modelling and precise measurement of soft tissue for craniofacial reconstruction using laser scanning. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Ibrahim, Muhammad Khairil and Ab. Rahman, Azlan and Ahmad, Baderul Hisham and Mohamad Abas, Fairul Zahri (2015) Prediction model to determine natural frequency for integral abutment bridge: a simplified method. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Ibrahim, Muhammad Khairil and Ab. Rahman, Azlan and Ahmad, Baderul Hisham and Mohamad Abas, Fairul Zahri (2015) Theoretical modal characteristics of integral abutment bridge with bored piles foundation. In: The Second International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Ibrahim, Mustafa Khaleel and Idris, Jamaliah (2015) Microstructure and mechanical properties of aluminum-silicon carbide composite fabricated by powder metallurgy. In: 3rd International Science Postgraduate Conference, 24-26 Feb,2015, Johor Bahru, Johor.

Ibrahim, Muttaka Na'iya and Che Puan, Othman (2014) Approximation of time headway on two-lane highways using test car approach. In: 8th SEATUC Symposium, 4-5 March, 2014, Skudai, Johor.

Ibrahim, Muttaka Na’iya and Che Puan, Othman (2014) Estimation of distance headway on two-lane highways using video recording technique. In: National Seminar on Civil Engineering Research (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Ibrahim, Nurul Ain (2016) Mud flood as a suitable material for subgrade layer of low traffic volume. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Nurul Farahen and Noorul, Hassan Zardari and Sharif, Moniruzzaman Shirazi and Mohd. Haniffah, Mohd. Ridza and Mat Taib, Shazwin and Yusop, Zulkifli and Mohd. Yusoff, Siti Mariam Akilah (2017) Identification of vulnerable areas to floods in kelantan river sub- basins by using flood vulnerability index. International Journal of Geomate, 12 (29). pp. 107-114. ISSN 2186-2982

Ibrahim, Sallehuddin and Zahidin, Nor Syahirah and Elmajri, Mustafa Musbah (2011) Preliminary investigation into the use of an ultrasonic sensing system for detecting mechanical deformation of surfaces. In: Progress in Process Tomography & Instrumentation System: Series 5/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 89-103. ISBN 978-967-354-182-9

Ibrahim, Suaib Suraiya (1990) Investigation of flexural cracking and stresses in reinforced concrete beams Suaib Suraiya Ibrahim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Zaharah and Baldwin Thomas, Pamela and Shahir, Shafinaz (2008) Degradation of styrene-rich petrochemical wastewater using Pseudomonas sp. In: Advances in Biosciences and Bioengineering. Penerbit UTM , Johor, pp. 52-59. ISBN 978-983-52-0554-5

Ibrahim, Zulkiflee (2012) Flood flow haracterstic in non-vegetated meandering channel: a flume simulation. In: International Conference On Water Resources (ICWR 2012), 5-9 November 2012, Langkawi, Malaysia.

Ibrahim, Zulkiflee and Abdul Latiff, Ab. Aziz and Subramaniam, Sivadas and Abu Bakar, Norlela and Ab. Halim, Hanif (2008) Flow experimental studies on mixing in a Salt Wedge Estuary. In: Problem Solving Through Experimental Hydraulics. Penerbit UTM , Johor, pp. 1-17.

Ibrahim, Zulkiflee and Abdul Latiff, Ab. Aziz and Subramaniam, Sivadas and Omar, Syahida and Mohamed Arshad, Nurul Shafawati (2007) An experimental study on the effect of resisting structures along the river banks to mixing in saline-wedge estuary. In: The 2nd International Conference on Managing Rivers in The 21st Century: Solutions Towards Sustainable River Basins (RIVER 2007), 6-8 June, 2007, Riverside Kuching, Sarawak.

Ibrahim, Zulkiflee and Abdul Latiff, Abd. Aziz and Hashim, Noor Baharim and Halim, Herni and Mokhtar Kamal, Nurul Hana and Haron, Nuryazmeen Farhan (2009) Experimental investigation on behaviour of cross-flow thermal effluent discharge in free surface flow. Malaysian Journal of Civil Engineering, 21 (1). pp. 82-97. ISSN 1823-7843

Ibrahim, Zulkiflee and Hashim, Noor Baharim and Abdul Latiff, Abd. Aziz and Halim, Herni and Mokhtar Kamal, Nurul Hana and Haron, Nuryazmeen Farhan (2008) Experimental investigation on the behaviour of thermal effluent in free surface flow. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ibrahim, Zulkiflee and Hashim, Noor Baharim and Romli, Eddi Zaimee and Omar, Syahida and Mohamed Arshad, Nurul Syafawati (2007) Intratidal study on salinity characteristics of Pulai River Estuary, Johor. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Ibrahim , Izni Syahrizal (2013) The mechanical properties of hybrid fibre reinforced composite concrete. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 2013.

Ibrahim Shaaban, Zyad Mohammed (1996) Algorithms for off-line upper-case hand-written text recognition and its associated processes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Idham, M. K. and Hainin, M. R. and Yaacob, H. and Warid, M. N. M. and Abdullah, M. E. (2013) Effect of aging on resilient modulus of hot mix asphalt mixtures. In: Advanced Materials Research.

Idham, Mohd. Khairul and Hainin, Mohd. Rosli and M. Warid, M. Naqiuddin and Abdul Raman, Noor Azah and Mamat, Rosmawati (2015) Evaluation on the performance of aged asphalt binder and mixture under various aging methods. Jurnal Teknologi, 77 (23). pp. 7-12. ISSN 2180-3722

Idris, Khairulnizam M. and Setan, Halim (2006) Robotic total station performance in industrial deformation solution. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Idris, Mohd. Hanafi and Jafari, Hassan and Harandi, Shervin Eslami and Mirshahi, Milad and Koleyni, S. (2012) Characteristics of as-cast and forged biodegradable Mg-Ca binary alloy immersed in Kokubo simulated body fluid. Advanced Materials Research, 445 . pp. 301-306. ISSN 1022-6680

Idris, Abd. Wahid and Tajul Rahim, Fakri (1991) Sistem Koordinat Satah Semenanjung Malaysia. Buletin Ukur, 2 (2). pp. 42-55. ISSN 0128-4274

Idris, Nurul Hazrina and Ahmad, Samsudin (2005) Evaluation of quickbird data for topographic detail mapping. In: Malaysian Remote Sensing and GIS conference & Exhibition 2005, 2005, Shah Alam, Selangor.

Ima Rashidah Ismail, (2012) The study of digital preservation in Malaysian cultural institution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Imran, Iswandi and Mujiman, Mujiman (2006) Shear strengthening of R/C beams using AFRP sheet with anchored ends. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ishag Adam, Elwalid Adam (2013) Finite element analysis of prestressed pretension concrete T-Beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Izzuadi (2011) Qualitative risk management in Jabatan Kerja Raya (JKR) Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, M. F. and Sulaiman, F. F. and Ali, N. and Kassim, A. (2016) Tree water uptake and suction distribution on tropical residual soil slope. In: 3rd International Conference on Geological, Geographical, Aerospace and Earth Science, AeroEarth 2015, 26-27 Sept 2015, Jakarta, Indonesia.

Ishak, M. F. and Ali, N. and Kassim, Azman (2013) The effect of tree induce suction on slope stabilization analysis. International Journal of Civil Engineering & Geo-Environment, 4 (n/a). n/a. ISSN 2180-2742

Ishak, Mohd Yunus and Mohd. Sam, A. R. and Abu Hassan, S. (2007) Shear behaviour of reinforced concrete beams stregthened with bonded carbon fibre reinforced polymer fabric. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Ishak, Shukri (2015) The comparison on the milestone and monthly payment of project performance in public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak , Nurlaili (2010) Shear behaviour of wire reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohammad and Erica Dina, Erica Dina and Abdul Rahman, Rosly and Ikhsan, Sabirin (2005) Observation of corrosion process of reinforcing steel. Jurnal Kejuruteraan Awam, 17 (1). pp. 13-22. ISSN 0128-0147

Ismail, Mohammad and Siaw, Wai San (2000) Kesan kebakaran ke atas kekuatan mampatan konkrit. Jurnal Kejuruteraan Awam, 12 (2). pp. 13-32. ISSN 0128-0147

Ismail, Mohammad and Yahaya, Nordin (2001) A review on effects of using electrochemical extraction technique in corrosion treatment of reinforced concrete. Jurnal Kejuruteraan Awam, 13 (1). pp. 1-10. ISSN 1823-7843

Ismail, Nurul Adzura and Harun, Sobri and Yusop, Zulkifli (2004) Synthetic simulation of streamflow and rainfall data using disaggregation models. Jurnal Kejuruteraan Awam, 16 (2). pp. 56-65. ISSN 0128-0147

Ismail, Zulhilmi and Harun, Sobri and Ibrahim, Zulkiflee (2009) Determination of flow characteristics in the vegetated compound channels. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ismail, Ahmad Azizi (2010) Penjadualan projek untuk pembinaan jalan di kawasan tanah berpaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Ahmad Fauzi and Bolong, Nurmin and Salim, Mohd. Razman and Matsuura, T. (2009) A review of the effects of emerging contaminants in wastewater and options for their removal. Desalination, 238 (1-3). pp. 229-246. ISSN 00119164

Ismail, Ahmad Fauzi and Salim, Mohd. Razman (2007) Fouling in law pressure UF membrane filtration by natural organic matter (NOM). In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Johor Bahru.

Ismail, Ahmad Fauzi and Salim, Mohd. Razman (2007) Role of natural organic matter (NOM) in fouling of membrane surface water treatment. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Ismail, Ahmad Shahrir (1994) Experimental study on timber space truss. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Ahmad Zuhdi (2015) Effect of tide on flood modelling and mapping in Kota Tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Asmadi (2009) Schedulling simulation for high-rise building comparison on time impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Asmadi and Mohamad, Mohamad Ibrahim and Yahya, Muhamad Azani (2010) Time impact of scheduling simulation for high rise building. International Journal of Sustainable Construction Engineering & Technology, 1 (2). pp. 55-63. ISSN 2180-3242

Ismail, Fauzilah (2002) Excavatability of hard materials based on laboratory and field assessments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Hadibah (Penterjemah) (1995) Mekanik bendalir untuk jurutera awam. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0015–7

Ismail, Hatta (2001) Kefahaman instrumental dan kefahaman relasional pelajar dalam topik lukisan ortografik dan pandangan keratan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Hina Muhammad (2013) Large deforamation of thin-walled tubular structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, I. and Azizi, Che Yunus M. and Ismail, A. S. and Ibrahim, A. A. (2011) The use of lignosulfote from empty fruit bunches as corrosion inhibitor. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 101-112. ISSN 0127-9696

Ismail, I. and Kamis, A. and Mamat, N. S. (2011) Reducing friction during drilling in water-based mud using glass beads. Jurnal Teknologi, 55 . pp. 39-52. ISSN 0127-9696

Ismail, Idawati and Saim, A. Aziz and Saleh, Abd. Latif (2003) Properties of hardened concrete bricks containing expanded polystyrene beads. In: Proceedings of the 5th Asia-Pacific Structural Engineering and Construction Conference , 26-28 August 2003, Johor Bahru, Malaysia.

Ismail, Idawati (2002) Properties of hardened concrete brick containing expanded polystyrene beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Issham and Mamat, Nur Suriani and Mamat, Mohd Baihaqi and Ismail, Ahmad Shamsulizwan and Kamis, Azmi and Ikhsan, Azman (2013) Improving gas bubbles’ half life in foam drilling fluid. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 103-110. ISSN E-ISSN 2180 3722

Ismail, M. and Raja, P. B. and Salawu, A. A. (2015) Developing deeper understanding of green inhibitors for corrosion of reinforcing steel in concrete. In: Handbook of Research on Recent Developments in Materials Science and Corrosion Engineering Education. IGI Global, pp. 118-145. ISBN 978-146668184-2

Ismail, M. and Yusuf, T. O. and Noruzman, A. H. and Hassan, I. O. (2013) Early strength characteristics of palm oil fuel ash and metakaolin blended geopolymer mortar. In: Material Design, Processing And Applications, Parts 1-4.

Ismail, Maznah and Hashim, Noor Baharim and Kazemi, Ziba (2016) Estimating dissolved oxygen depletion in inner western Johor strait, Malaysia using a three dimensional water quality model. Malaysian Journal of Civil Engineering, 28 (3). pp. 240-251. ISSN 1823-7843

Ismail, Mohamad (Penterjemah) (1992) Amalan kerja konkrit. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–74–6

Ismail, Mohamed A. and Hussin, Mohd. Warid and Ismail, Mohammad (2010) Palm oil fuel ash as the future supplementary cementitious material in concrete. Concrete Plant International (3). pp. 38-45. ISSN 1437-9023

Ismail, Mohamed ElGelany and Ismail, Mohamed Amri and Ohtsu, M. (2008) Non-destructive evaluation of corrosion activity in reinforced concrete slab. In: Proceedings of the 4th International Structural Engineering and Construction Conference, ISEC-4 - Innovations in Structural Engineering and Construction. Taylor & Francis Ltd, England, 1135 -1141. ISBN 978-041545755-2

Ismail, Mohammad and Ismail, Mohamed E. (2007) Solar energy as an alternative option in cathiodic protection system for sustainable structure in Malaysia. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Ismail, Mohammad and Mohamad Zin, Rosli and Ismail, Mohamed A. and Mohd. Yatim, Jamaluddin and Omar, Wahid (2008) Awareness among professionals in malaysian construction industries on reinforcement corrosion prevention and protection. Malaysian Journal of Civil Engineering, 20 (1). pp. 200-210. ISSN 1823-7843

Ismail, Mohammad and Muhammad, Bala and Yusuf, Abdirahman Ali and Majid, Zaiton and Ismail, Mohamed ElGelany (2011) Mechanical capabilities and fire endurance of rural rubber latex modified concrete. Canadian Journal of Civil Engineering, 38 (6). pp. 661-668. ISSN 0315-1468

Ismail, Mohammad and Noruzman, Ainul Haezah and Bhutta, Muhammad Aamer Rafique and Yusuf, Taliat Ola and Ogiri, Ibrahim Hassan (2016) Effect of vinyl acetate effluent in reducing heat of hydration of concrete. Ksce Journal of Civil Engineering, 20 (1). pp. 145-151. ISSN 1226-7988

Ismail, Mohammad and Siti Fatimah, A. R. and Muhammad, Bala and Md. Noor, Norhazilan and Bakhtiar, Hazri (2011) Embedded sensor for detecting corrosion of reinforcement in concrete. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1118-1123. ISBN 978-303785127-2

Ismail, Mohammad and Siti Fatimah, A. R. and Muhammad, Bala and Bakhtiar, Hazri (2011) Embedded sensor for detecting corrosion of reinforcement in concrete. Advanced Materials Research, 250-25 (-). pp. 1118-1123. ISSN 1022-6680

Ismail, Mohd. Faizu (2015) Project management skills for new engineers in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nadirah and Abdul Majid, Zaiton and Aris, Azmi and Ibrahim, Zaharah (2013) Reactive black 5 sorption by ananas comosus leaf powder. In: 26th Regional Symposium of Malaysia analytical Sciences (SKAM 26), 2013., 4-5 December 2013, Kuching, Sarawak.

Ismail, Neza and Mohamad, Mohamad Ibrahim (2015) Application of multi dimensional diagnosis system or P diagram in building design. In: Malaysia-Japan Joint International Conference 2015 (MJJIC2015), 13-15 Nov, 2015, Japan.

Ismail, Neza and Mohamad, Mohamad Ibrahim (2015) Factors in building design that improve building maintainability in Malaysia. In: 31st Annual Association of Researchers in Construction Management (ARCOM) Conference, 7-9 Sept, 2015, United Kingdom.

Ismail, Neza and Mohamad, Mohamad Ibrahim (2015) Maintainability factors for robust maintainance integrated design (R-MInD) in building design. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Ismail, Noor Ismaniza (2010) Kajian kualiti air bekalan di Jitra,Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nur Mala (2010) Strategies to enhance the usage of Cad Based Measurement Software (CBMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Rozaina (2008) The application of artificial neural network in seismic evaluation of buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Siti Saidatul Azween (2015) Soil moisture variation due to grass water uptake in shallow slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Syuhaida and Md. Yusof, Aminah (2009) Benchmarking the performance of Malaysia's construction industry. Management Research and Practice, 1 (1). pp. 1-13. ISSN 2067-2462

Ismail, Syuhaida (2011) Key performance indicators for public infrastructure project in Malaysia. In: The 12Th International Conference On Qir (Quality In Research) 2011.

Ismail, Syuhaida (2011) Procurement of relational contract in Malaysia: problems and challenges. In: 29th Conference Of The Asean Federation Of Engineering Organisations (CAFEO 29).

Ismail, Tarmizi (1994) Analysis of an urban water supply by linear programming. Jurnal Kejuruteraan Awam, 7 (2). pp. 51-60. ISSN 0128-0147

Ismail, Tarmizi and Alang Othman, Mazlina and Fadzil, Abu Bakar and Harun, Sobri and Zainuddin, Zaitul Marlizawati (2010) Deposition of sediments in detention pond. Malaysian Journal of Civil Engineering, 22 (1). pp. 95-118. ISSN 1823-7843

Ismail, Tarmizi and Harun, Sobri and Zainuddin, Zaitul Marlizawati (2012) Impacts of climate change on multi-source reservoir optimal operation. In: Proceedings 2nd International Conference On Water Resources (ICWR2012), 2012.

Ismail, Zaleha and Kasmin, Mohd. Khalid (2007) Developing flexible multiple-choice item quiz questions for learning mathematics on moodle. In: Prosiding Kebangsaan Awam '07, 2007, Langkawi.

Ismail, Zuhaila and Jiann, Lim Yeou and Ahmad, Huda Salmi and Shafie, Sharidan and Fitt, Alistair David (2015) Fluid mechanics of the descemet's membrane detachment with spontaneous reattachment. In: 7th International Conference on Research and Education in Mathematics (ICREM7), 25-27 Aug, 2015, Kuala Lumpur, Malaysia.

Ismail, Zulhilmi and Jamal, Mohamad Hidayat (2012) Modelling wave propagation and run-up on impermeable slope. In: International Conference Water Resources 2012, 2012.

Ismail, Zulhilmi and Shiono, Koji (2008) Flow rate and sediment transport characteristics compound meandering channels with vegetated floodplain. In: Problem Solving Through Experimental Hydraulics. Penerbit UTM , Johor, p. 91.

Ismail, Zulhilmi and Jumain, Mazlin and Jaffar Sidek, Faridah and Abd. Wahab, Ahmad Khairi and Ibrahim, Zulkiflee and Jamal, Mohamad Hidayat (2013) Scour investigation around single and two piers in side by side arrangement. International Journal of Research in Engineering and Technology, 2 (10). pp. 459-465. ISSN 2319-1163

Ismail , Nazirah (2010) Contractor's time performance in affordable housing program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohamed A. and Soleymani, Hamid and Ohtsu, Masayasu (2006) Early detection of corrosion activity in reinforced concrete slab by AE technique. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Ismail (Penterjemah), Mohamad (1992) Pengenalan kepada konkrit. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–73–8

Ismail, Che Ros and Hainin, Mohd. Rosli and Chik, Abdul Aziz (2005) Evaluation of fundamental properties of compacted mixes used as patching materials for low volume roads. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ismail, Mohamad and Mansur, Shaiful Amri and Mohd. Ghazali, Mohd. Zulkifli (1993) Corrosion of reinforced concrete bridges. In: Seminar Penyelidikan Fakulti Kejuruteraan Awam, 1993, Johor Bahru, Johor.

Iswandi, Aifi Andrice Izhar (2013) External cost of noise effect on construction workers using impact pathway approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Izman, Sudin and Ghodsiyeh, Danial and Hamed, T. and R. Rosliza, R. Rosliza and Rezazadeh, Mohammadali (2012) Effects of adding multiwalled carbon nanotube into dielectric when edming titanium alloy. Advanced Materials Research, 463-46 . pp. 1445-1449. ISSN 1022-6680

Izman, Sudin and Hassan, M. A. and Abdul Kadir, Mohammed Rafiq and Abdullah, M. R. and Anwar, Mahmood and Shah, A. and Daud, Rosdi (2012) Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy. Advanced Materials Research, 399-40 . pp. 1564-1567. ISSN 1022-6680

Izman, Sudin and Shah, A. and Abdul Kadir, Mohammed Rafiq and Engku Abu Bakar, Engku Mohammad Nazim and Anwar, Mahmood and Hassan, Mas Ayu and Safari, Habib (2012) Effect of thermal oxidation temperature on rutile structure formation of biomedical TIZRNB alloy. Advanced Materials Research, 393-39 . pp. 704-708. ISSN 1022-6680

Izman, Sudin and Shayganpour, A. and Idris, Mohd. Hasbullah (2011) Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design of experiments. Advanced Materials Research, 377 . pp. 422-424. ISSN 1022-6680

J

Jaadil, Jamilah (1991) Kelakuan ubah bentuk lempung lembut Kelang dalam ujian pengkukuhan 1-dimensi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jaafar, Juhana and Ismail, Ahmad Fauzi (2012) Contribution of nanoclays to the barrier properties of speek/ cloisite15a® nanocomposite membrane for DMFC application. In: Sustainable Membrane Technology for Energy, Water and Environment. Penerbit UTM, Skudai, Johor, pp. 67-92. ISBN 978-967-354-186-7

Jaafar, Juhana and Ismail, Ahmad Fauzi and Matsuura, T. J. (2012) Effect of dispersion state of cloisite15a (r) on the performance of speek/cloisite15a nanocomposite membrane for DMFC application. Journal Of Applied Polymer Science, 124 (2). pp. 969-977. ISSN 0021-8995

Jaafar, Mohd. Nadzri (1997) Pengambilan balik tanah (akta pengambilan balik tanah 1960). Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Jaafar, Mohd. Nadzri (1998) Pengukuran keupayaan projek pembangunan. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Jaafar, Redzuan (2010) Collaboration and communication of project team in PWD web based project monitoring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaafar Sidek, Faridah and Abdul Wahab, Muhammad Al-Jeffry (2007) The effect of porosity of submerged break water structured on non-breaking wave transformation. Malaysian Journal of Civil Engineering, 19 (1). pp. 17-25. ISSN 1823-7843

Jabbarani Torghabeh, Zahra and Hosseinian, Seyyed Shahab. and Ressang, Aziruddin (2013) Risk assessment of ergonomic risk factors at construction sites. In: Applied Mechanics and Materials (Volume 330).

Jabbarani Torghabeh, Zahra and Hosseinian, Seyyed Shahab and Ressang, Aziruddin (2013) Relative importance of hazards at construction sites. In: Applied Mechanics and Materials (Volume 330) June 2013, Zurich.

Jafari, Hasan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Bakhsheshi Rad, Hamid Reza and Ardestani, Seyed Sadegh Khayat and Ahmadshoar, Vali (2011) Effect of mould runner and coating on graphite nodule characteristics and hardness of thin wall ductile iron. Advanced Materials Research, 264-26 . pp. 266-271. ISSN 1022-6680

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Rahimi, Hadi and Ghobadian, Barat (2011) EIS study of corrosion behavior of metallic materials in ethanol blended gasoline containing water as a contaminant. Fuel, 90 (3). pp. 1181-1187. ISSN 0016-2361

Jafari, Sajjad and Taheri, Mohammad Mahdi and Idris, Jamaliah (2012) Bioactive coating on stainless steel 316L through sol-gel method. Advanced Materials Research, 383-39 . pp. 3944-3948. ISSN 1022-6680

Jaffar Sidek, F. and Abd. Wahab, A. K. and Mohd. Noh, N. H. and Ishak, D. S. M. (2015) Determining coral diversity around engineered artificial reefs in Teluk Kalong Besar, Pulau Redang using CPCE. In: The 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Jahed Armaghani, D. and Hasanipanah, M. and Mahdiyar, A. and Abd. Majid, M. Z. and Bakhshandeh Amnieh, H. and Tahir, M. M. D. (2016) Airblast prediction through a hybrid genetic algorithm-ANN model. Neural Computing and Applications . pp. 1-11. ISSN 0941-0643 (In Press)

Jahidin, Mohammed Ridzuan (2010) Slope stability analysis of critical slope along North South Highway (Southern Region) using limit equilibrium method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jajarm, Arash Izadi (2014) Behavior of composite sandwich panel under quasi-static indentation load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jajarmizadeh, Milad (2013) Streamflow modeling of a large arid catchment using semi-distributed hydrological model and modular neural network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jalil, M. A. and Abdolkarim, Afroozeh and Saktioto, Toto and Ong, C. T. and Yupapin, Preecha P. (2012) Generation of THz frequency using panda ring resonator for THz imaging. International Journal Of Nanomedicine, 7 . pp. 773-779. ISSN 1176-9114

Jamali, Salina (2003) Lateral torsional buckling of trapezoid corrugated web section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaluddin, N. and Hamzah, A. F. and Wan Ibrahim, M. H. and Jaya, R. P. and Arshad, M. F. and Abidin, N. E. Z. and Dahalan, N. H. (2016) Fresh properties and flexural strength of self-compacting concrete integrating coal bottom ash. In: 3rd International Conference on Civil and Environmental Engineering for Sustainability, IConCEES 2015, 1-2 Dec 2015, Melaka, Malaysia.

Jamaluddin, Norwati (2002) Penilaian prestasi rasuk rencam konkrit-keluli menggunakan keratan keluli tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaludin, Nurul Ain and Hassan, Azman and Othman, Norhayani (2015) Morphology and chemical resistance of poly(ethylene terephthalate)/ polycarbonate blends: effect of blend compositions. In: Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Jamaludin, Khairur Rijal and Adenan, Mohd. Shahriman and Md. Daud, Mohd. Yusof and Abd. Raman, Norazmein (2012) Delaminating control on drilling the medium density fiber board with robust optimization. Jurnal Teknologi, 59 . pp. 95-98. ISSN 0127–9696 (Print) ; 2180-3722 (Electronic)

Jameran, Aminuddin and Ibrahim, Izni Syahrizal and Sarbini, Noor Nabilah (2015) Toughness properties of steel-polypropylene fibre reinforced concrete under elevated temperature. In: 9th Asia Pacific Structural Engineering & Construction Conference (APSEC) & 8th Asean Civil Engineering Conference (ACEC), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Jarial, Rini and Shard, A. and Thakur, Sveta and Sakinah, Abdul Munaim and Zularisam, Abd. Wahid and Rezania, Shahabaldin and Kanwar, Shamsher Singh and Singh, Lakhveer (2016) Characterization of flavonoids from fern Cheilanthes tenuifolia and evaluation of antioxidant, antimicrobial and anticancer activities. Journal of King Saud University - Science . ISSN 1018-3647 (In Press)

Jarkasi, Mohd. Daud (2013) Influence of aggregate flakiness on marshall properties for asphaltic concrete (AC14) mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaryani, Farhang and Omidvar, Ghasem and Daruis, Rusni and Nasab, Samaneh Salehi and Zafarghandi, Somaye Fattahi and Ibrahim, Suhaimi (2011) Variables affecting the isage of e-portfolios by project managers in construction industry. In: 3rd International Conference On Software Technology And Engineering (ICSTE 2011).

Jasmin , Lenny Sheryme (2007) Physical properties and durability of multi-blended cement mortars. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jasmis, Jamaluddin and Ibrahim, Suhaimi and Anom, Raja Baharuddin and Mohd. Hassan, Ahmad Efendi and Elias, Shamsul Jamel (2013) Im-decrud prototype- a tool to support engineering tasks for requirements and design crosscutting concerns. ARPN Journal of Systems And Software, 3 (1). pp. 1-6. ISSN 2222-9833

Jaya, R. P. and Muhamad Nor, M. A. A. and Ahmad, Z. A. and Mohd. Amin, Z. (2013) Properties of mortar containing rice husk ash at different temperature and exposed to aggressive environment. In: Advanced X-Ray Characterization Techniques.

Jayakumaran, Raguraman (2007) Correlation between N-Value from standard penetration test and allowable bearing capacity of soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jayanti, D. S. and Mirza, J. and Jaya, R. P. and Abu Bakar, B. H. and Hassan, N. A. and Hainin, M. R. (2016) Chloride penetration of RHA concrete under marine environment. Proceedings of the Institution of Civil Engineers: Maritime Engineering, 169 (2). pp. 76-85. ISSN 1741-7597

Jeffry, Siti Nur Amiera (2015) Properties of asphaltic concrete AC14 containing coconut shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jelod, Jetoony @ Gerald Jetony (2008) Implications of river sand extraction in Sungai Tuaran Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Jeman, Mimi Sulastrie (2015) Numerical simulation in foundation due to settlement problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jidin, Auzani (2004) Sliding mode varable structure control design principles and application to DC drives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik E. (2011) An optimized switching strategy for quick dynamic torque control in dtc-hystresis-based induction machines. IEEE Transactions on Industrial Electronics, 58 (8). pp. 3391-3400. ISSN 0278-0046

Jitno, Hendra and Gofar, Nurly (2005) Stability and deformation analysis of failed embankments founded on soft clays. Jurnal Kejuruteraan Awam, 17 (1). pp. 1-12. ISSN 0128-0147

John Sitin, Colline (2009) Delay in issuance of certificate of fitness for occupation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Johnny Kong, Jak Kan (2014) Software and hardware co-simulation platform for image processing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Johnson, Olufemi Adebayo (2012) Extent of highway traffic shockwave velocity propagations by road humps. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jomehzadeh, Fatemeh and Nejat, Payam and John, Kaiser Calautit and Mohd. Yusof, Mohd. Badruddin and Shaikh Salim, Sheikh Ahmad Zaki and Ben, Richard Hughes and Muhammad Yazid, Muhammad Noor Afiq Witri (2017) A review on windcatcher for passive cooling and natural ventilation in buildings, part 1: indoor air quality and thermal comfort assessment. Renewable and Sustainable Energy Reviews, 70 . pp. 736-756. ISSN 1364-0321

Jorat, Mohammad Ehsan (2010) Strength and compressibility charactrisitcs of kaolin mixed with bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Joshani, M. and Koloor, S. S. R. and Abdullah, Redzuan (2012) Damage mechanics model for fracture process of steel-concrete composite slabs. In: Regional Conference on Automotive Research, ReCAR 2011. Trans Tech Publications, Switzerland, pp. 339-345. ISBN 978-303785413-6

Judi, Siti Suhana (2007) The contractor's right actions against late or non payment by the employer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Juhari, Mohd. Al Jeffrie (2010) Effect of seismic loading in slope stability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Juki, Mohd. Irwan (2000) Prestasi sambungan keratan keluli tempatan pada paksi minor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jumain, Mazlin and Ibrahim, Zulkiflee and Ismail, Zulhilmi and Harun, Sobri and Makhtar, Md. Ridzuan and Abd. Rahman, Mohd. Suhaimi and Zaini, Nur Atiah and Samsudin, Mohd. Fuad and Tajol Anuar, Muhd. Zubair (2014) Flume investigation on bed load transport and bedforms in simple channels. In: Seminar Penyelidikan Kejuruteraan Awam (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Jumain, Mazlin and Ismail, Zulhilmi and Ibrahim, Zulkiflee and Zaini, Nur Atiah (2013) Sediment transport rate and bed formation in straight compound channels. Global Journal of Environmental Research, 7 (3). pp. 40-44. ISSN 1990-925X

Junoh, Hazlina and Jaafar, Juhana and Mohd. Norddin, Muhammad Noorul Anam and Ismail, Ahmad Fauzi and Othman, Mohd. Hafiz Dzarfan and Rahman, Mukhlis A. and Yusof, Norhaniza and Wan Salleh, Wan Norhayati and Ilbeygi, Hamid (2015) A review on the fabrication of electrospun polymer electrolyte membrane for direct methanol fuel cell. Journal of Nanomaterials, 2015 . ISSN 1687-4110

Juremi, N. R. Md. and Mustafa, U. and Agam, M. A. and Nur, H. (2011) Nanosphere lithography: fabrication of periodic arrays of nanoholes. AIP Conference Proceedings, 1341 . pp. 296-300. ISSN 0094-243X

Jusli, Euniza and Md. Nor, Hasanan and Jaya, Ramadhansyah Putra and Haron, Zaiton (2015) Strength and microstructure properties of double layered concrete paving blocks containing waste tyre rubber granules. Jurnal Teknologi, 73 (4). pp. 85-90. ISSN 0127-9696

Jusli, Euniza and Md. Nor, Hasanan and Ramadhansyah, P. J. and Haron, Zaiton (2015) Effect of rubber tyre granules on concrete strength and the microstructure characteristics of rubberized concrete. In: Applied Mechanics and Materials, 18-20 May, 2015, Kuala Lumpur, Malaysia.

Jusoh, Muhammad Noor Hazwan (2009) Utilization of optical satellite data for measuring carbon dioxide at Felda Maokil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jusoh, Nawawi (1992) Prediksi Kawasan Mineralisasi Emas Dengan Kaedah Pemprosesan Imej Berdigit. Buletin Ukur, 3 (1). pp. 49-58.

Jusoh, Nawawi and Mohd. Said, Shaharuddin and Suki, Halimah (1996) Panduan umum perlaksanaan projek sarjana muda (ukur tanah). Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Jusoh, Siti Norafida and Mohamad, Hisham and Marto, Aminaton and Mohd. Yunus, Nor Zurairahetty and Kasim, F. and Namazi, Eshagh and Sohaei, H. (2015) Precast concrete tunnel segments: a review on current research. In: International Conference and Exhibition on Tunnelling and Underground Space (ICETUS2015), 3-5 March, 2015, Kuala Lumpur, Malaysia.

Jusoh, Siti Norafida and Mohamad, Hisham and Marto, Aminaton and Mohd. Yunus, Nor Zurairahetty and Kasim, Fauziah (2015) Segment’s joint in precast tunnel lining design. Jurnal Teknologi, 77 (11). pp. 91-98. ISSN 0127-9696

Jusoh, Nawawi (2006) Kajian alam sekitar. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

K

K.Mandal, Nirmal and Abd.Rahman, Roslan and Leong, M.Salman (2005) Experimental investigation of vibration power flow in thin technical orthotropic plates by the method of vibration intensity. Journal of Sound and Vibration, 285 . pp. 669-695. ISSN 0022-460X

Kadir, Norasman (2015) Stability analysis of fill slope at Sekolah Menengah Kebangsaan Song no.2's project using SLOPE/W. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kadirin , Noraisah (2010) The potential adoption of relational contracting in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kaini, Iman (2013) Implementation of Integrated Project Delivery (IPD) and Building Information Modelling (BIM) in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kakepoto, Inayatullah and Said, Hamdan and Habil, Hadina and Umrani, Aamir Iqbal (2013) Industrial advancements and emerging between industry and engineering universities of Pakistan. European Journal of Business and Management, 5 (3). pp. 200-206. ISSN 2222-1905

Kakh, Samira and Abd. Rashid, Ahmad Safuan and Kalatehjari, Roohollah and Ali, Nazri and Mansor, Fara Wan and Rezanejad, Atefeh (2014) Writing critical literature review in geotechnical engineering. Electronic Journal of Geotechnical Engineering, 19 K . pp. 2429-2436. ISSN 1089-3032

Kalatehjari, R. and Ali, Nazri and Hajihassani, M. and Kholghi Fard, M. (2012) The application of particle swarm optimization in slope stability analysis of homogeneous soil slopes. International Review on Modelling and Simulations, 5 (1). pp. 458-465. ISSN 1974-9821

Kalatehjari, R. and Ali, Nazri and Kholghifard, M. and Hajihassani, M. (2014) The effects of method of generating circular slip surfaces on determining the critical slip surface by particle swarm optimization. Arabian Journal of Geosciences, 7 (4). pp. 1529-1539. ISSN 1866-7511

Kalatehjari, Roohollah (2013) An improvised three-dimensional slope stability analysis based on limit equilibrium method by using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kalatehjari, Roohollah and A. Rashid, Ahmad Safuan and Ali, Nazri and Hassani, Mohsen (2014) The contribution of particle swarm optimization to three-dimensional slope stability analysis. Scientific World Journal . ISSN 1537-744X

Kam, Cheezhou and Beng Hong, Ahmad Kueh and Low, K. B. and Wang, X. Y. and Shek, Poingian (2014) Uniaxial compressive stability of laminated composite plate with localised interfacial degeneration. Materials Research Innovations, 18 . S6109-S6116. ISSN 1432-8917

Kamal, Nurshafeena (2016) Determining emergency evacuation aid for flood disaster preparedness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamal Abood, Ahmad Mohammad (2001) Determination of calibration constants for in-situ stress measurement in concrete structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarol Zaki, Mohd. Nasir (2009) Splice system in extending the precast prestressed concrete beam span. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarrudin, Nadia and Ali, Mohamed Wijayanuddin and Kamsah, Mohd. Zaki and Hassim, Mimi Haryani and Kidam, Kamarizan (2009) Computer-based safety training for semiconductor industry. Jurnal Teknologi F (51F). pp. 131-141. ISSN 0127-9696

Kamaruddin, Tantish (2000) Penggunaan surety bond di dalam industri binaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarudin, Khairul Hisyam and Abd. Wahid, Siti Nurhuda (2014) Indicators of sustainable community based rural tourism: a review. In: International Conference on Urban and Regional Planning 2014, 9-11 May, 2014, Skudai, Johor.

Kamarudin, Khairul Hisyam and Ngah, Ibrahim and Abd. Wahid, Siti Nurhuda (2014) Framework considerations for a sustainable eco-culture tourism (ECT) development for Orang Asli of Royal Belum-Temenggor Forest Complex, Perak. In: National Conference on Royal Belum (NCRB2014), 9-10 Dec, 2014, Perak, Malaysia.

Kamarudin, Khairul Hisyam and Ngah, Ibrahim and Mohammad Omar, Amiradiha (2014) Sustainable eco-culture tourism in Royal Belum-Temenggor: emerging prospects and challenges for Orang Asli. In: National Conference on Royal Belum (NCRB2014), 9-10 Dec, 2014, Perak, Malaysia.

Kamarudin, Khairul Hisyam and Ngah, Ibrahim and Razak, Khamarrul Azahari (2015) Local economic development – assessment of local attitudes towards conservation and tourism around Royal Belum Temengor forest complex, Perak, Malaysia. In: International Conference on Development and Socio-Spatial Inequalities 2015, 18-20 August, 2015, Penang, Malaysia.

Kamarudin, Khairul Hisyam and Razak, Khamarrul Azahari and Omar, Siti Rohana and Robani, Anidah (2014) Business practices among tour boat operators of Royal Belum-Temenggor, Gerik. In: National Conference on Royal Belum 2014, 9-10 Dec, 2014, Perak, Malaysia.

Kamarudin, Md. Nor and Khoo, Ernest Hock Don (1999) Perkembangan Dalam Penentuan Model Geoid Masa Kini. Buletin Geoinformasi, 3 (1). pp. 22-36. ISSN 1394-7702

Kamarudin, Md. Nor and Mohd. Bukari, Saifullizan and Zainon, Othman (1999) Panduan penggunaan gravimeter. Manual. Fakulti Kejuruteraan & Sains Geoinformasi, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

Kamarudin, Md. Nor and Ong, Hui Poh (2006) Calculation in estimating total electron content GPS. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Kamarudin, Mohamad Hasanol Naim and Abdul Rahim, Ruzairi (2012) Landslide detection using optical sensor. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, p. 41275. ISBN 978-967-354-186-7

Kamarudin, Mohamad Hasanol Naim and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Rahiman, Mohd. Hafiz Fazalul and Bunyamin, Salinda (2012) Techniques used for landslide monitoring by using fiber optic sensors. In: Process Tomography & Instrumentation -Series 8. InTech, pp. 587-605. ISBN 978-953-51-0091

Kamarudin, Md. Nor (2006) Perhitungan dalam Astronomi lapangan. Documentation. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia.

Kamarulafizam, I. and Salleh, Sh-Hussain and Harris, Arief A. and Yusoff, K. and Hamedi, M. and Jamil, A. A. (2013) Heart sound feature representation using extended modified b-distribution. Transactions of Japanese Society for Medical and Biological Engineering, 51 . R-204. ISSN 1881-4379

Kamaruzaman, Dalila (2007) The behaviour of glulam beam strengthened using fibre reinforced polymer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamis, Azmaliza and Setan, Halim (2007) The applications of surveying techniques in Kuala Lumpur Smart Tunnel Project. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor International Convention Centre, Johor Bahru, Johor.

Kamyab, H. and Din, M. F. M. and Hosseini, S. E. and Ghoshal, S. K. and Ashokkumar, V. and Keyvanfar, A. and Shafaghat, A. and Lee, C. T. and Bavafa, A. and Majid, M. Z. A. (2016) Optimum lipid production using agro-industrial wastewater treated microalgae as biofuel substrate. Clean Technologies and Environmental Policy, 18 (8). pp. 2513-2523. ISSN 1618-954X

Kamyab, H. and Din, M. F. M. and Ghoshal, S. K. and Lee, C. T. and Keyvanfar, A. and Bavafa, A. A. and Rezania, S. and Lim, J. S. (2016) Chlorella pyrenoidosa mediated lipid production using Malaysian agricultural wastewater: effects of photon and carbon. Waste and Biomass Valorization, 7 (4). pp. 779-788. ISSN 1877-2641

Kamyab, Hesam and Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Talaiekhozani, Amirreza and Lim, Jeng Shiun and Keyvanfar, Ali and Abd. Majid, Muhd. Zaimi and Nordin, Siti Noor Azuwa (2015) Phytoremediation of palm oil mill effluent (POME) by using Lemna minor and Chlamydomonas for organic fertilizer. In: The 6th IWA-ASPIRE Conference & Exhibition, 20-24 Sept, 2015, China.

Kang , Seng Yiak (2004) Analysis of curved 2-D structures-application of structural morphology ideas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kanniah, Kasturi Devi and Ng, Su Wai and Lau, Alvin Meng Shin and Rasib, Abd. Wahid (2007) Per-pixel and sub-pixel classifications of high-resolution satellite data for mangrove species mapping. Applied GIS, 3 (8). ISSN 1832-5505

Kanniah, Kasturi Devi and Ng, Su Wai and Lau, Alvin Meng Shin and Rasib, Abd. Wahid (2005) Linear mixture modelling applied to ikonos data for mangrove mapping. In: Proceedings of the 26th Asian Conference on Remote Sensing, ACRS 2005, 7-11 November 2005, Hanoi, Vietnam.

Kanniah, Kasturi (2006) Remote sensing untuk pengurusan sumber bumi (bahagian i). Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Karasi Manickam, Mangair (2012) Effectiveness of discretized data set on multilayer perceptron network with particle swarm optimization in classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karis, Mohd. Safirin and Mohomed, Mutaz and Elsawi, Elhassan and Najafzadeh, Nazila and Sulaiman, Siti Fatimah and Abdul Rahim, Ruzairi and Leow, Pei Ling (2011) Detect large moving objects underwater and distinguish between natural and artificial objects. In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 135-142. ISBN 978-967-354-185-0

Kasim, Fauziah and Marto, Aminaton and Yusof, Mohd. Zain and Marwah, Mohd. Khatta (2002) Penentuan ketinggian kegagalan tambakan cubaan Muar. Jurnal Kejuruteraan Awam, 14 (2). pp. 1-13. ISSN 0128-0147

Kasim, Fauziah (2008) Compaction parameters’ estimation for ground improvement. In: Ground Improvement & Stabilization. Penerbit UTM , Johor, pp. 1-26. ISBN 978-983-52-0573-6

Kasim, Fauziah (2007) Parametric study on seepage flow in unsaturated and saturated zones in earthfill dam. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Skudai.

Kasim, Fauziah and Marto, Aminaton and Abdul Rahman, Nur Amalina and Choy, Soon Tan (2015) Unconfined compressive strength and microstructure of clay soil stabilised with biomass silica. Jurnal Teknologi, 77 (11). pp. 9-15. ISSN 0127-9696

Kasim, Fauziah and Wong, Sou Fei (2002) Numerical parametric simulations for seepage flow behaviour through an earthfill dam. Jurnal Kejuruteraan Awam, 14 (1). pp. 18-35. ISSN 0128-0147

Kasim, Fauziah and Marto, Aminaton (2003) Performance characteristics of embankment on soft ground. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Kasraei, Mohammadreza (2010) Energy life cycle cost analyzing (ELCCA) in residential building to energy efficiency approach in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kassim, Azman and Gofar, Nurly and Lee, Min Lee (2008) Numerical simulation of infiltration through unsaturated layered soil column. Malaysian Journal of Civil Engineering, 20 (2). pp. 211-222. ISSN 1823-7843

Kassim, Azrnan and Kasim, Fauziah (2003) A simulation study of slope stability affected by construction of new buildings at Universiti Teknologi Malaysia, Skudai. Jurnal Kejuruteraan Awam, 15 (1). pp. 49-61. ISSN 0128-0147

Kassim, Khairul Anuar (2009) The nanostructure study on the mechanism of lime stabilize soil. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Kassim, Khairul Anuar and Chem, Kok Kai (2004) Lime stabilized Malaysian cohesive soils. Jurnal Kejuruteraan Awam, 16 (1). pp. 13-23. ISSN 0128-0147

Kassim, Khairul Anuar and Chow, Shiao Huey (2000) Consolidation characteristics of lime stabilised soil. Jurnal Kejuruteraan Awam, 12 (1). pp. 31-42. ISSN 0128-0147

Kassim, Mohd. Azraai and Hanapi, Muhammad Nassir and Abdullah, Mohd. Harun (2000) A non-instrumental method to determine hydraulic heads on low-lying coastal aquifer. Jurnal Kejuruteraan Awam, 12 (1). pp. 1-8. ISSN 0128-0147

Kassim, Mohd. Azraai and Lee, Jen Loong (2002) A Study On Variations In Sewerage Construction Projects. Jurnal Teknologi B (37B). pp. 13-26. ISSN 0127-9696

Kassim, Azman and N., Gofar and Lee, M. L. (2006) A Study of infiltration on unsaturated layered soil column. In: SEPKA 2006- National Seminar on Civil Engineering Research- Engineering and Scientific Research Towards a Better and Sustainable Future Development, 2006, UTM Skudai, Johor.

Kassim, Azman and Mohd. Amin, Mohd. For and Mohamad, Edy Tonnizam and Sa'afar, Nurul Azean and Abu Bakar, Mohd. Najid (2005) Laboratory Studies Weathered Granites for Excavation Purposes. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Kassim, Khairul Anuar (1999) Embankment stabilisation using lime and ash: an option for safer slopes. Jurnal Kejuruteraan Awam, 11 (2). pp. 47-58. ISSN 0128-0147

Kassim, Khairul Anuar and A. Rashid, Ahmad Safuan and Kueh, Ahmad Beng Hong and Yah, Chong Siaw and Siang, Lam Chee (2016) Criteria of acceptance for constant rate of strain consolidation test for tropical cohesive soil. Geotechnical and Geological Engineering, 34 (4). pp. 931-947. ISSN 0960-3182

Kassim, Khairul Anuar and Hamir, R. B. and Kok, K. C. (2005) Modification and stabilization of Malaysian cohesive soils with lime. Geotechnical Engineering, 36 (2). 123 -132. ISSN 0046-5828

Kassim, Khairul Anuar and Niroumand, Hamed (2014) Square plates as symmetrical anchor plates under uplift test in loose sand. Geomechanics and Engineering, 6 (6). pp. 593-612. ISSN 2092-6219

Kassim, Mohd Azraii and Othman, Mohd. Nor (1999) Palm oil mill effluent treatment using rotating biological contactor. Jurnal Kejuruteraan Awam, 11 (1). pp. 1-6. ISSN 0128-0147

Kassim, Mohd. Azraai and Mohd. Ghazali, Mohd. Zulkifli (1995) Development of a civil engineering curriculum and its impact on the quality of civil engineers. In: ASAIHL 1995 National Conference Malaysia, 30 May 1995, Dewan Jumaah, UTM, Johor.

Kassim, Mohd. Azraai (Penterjemah) and Salim, Mohd. Razman (Penterjemah) and Othman (Penterjemah), Mohd. Noor (Penterjemah) (1994) Rawatan kumbahan dalam iklim panas. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0003–3

Kassim, Khairul Anuar and Shamshuddin, Mustafa Kamal (1999) Lime stabilization for marginal sub-grade as capping layer for road construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Kasypi, M. and Abd. Kader, Ab. Saman and Amir, W. M. and Shah, M. Z. and Zailani, A. and Raqib, A. G. and Harom, N. M. A. and S., R. Chan (2015) Window analysis: a container terminal. In: International Conference on Integrated and Sustainable Transportaion, 15-17 Dec, 2015, Melaka, Malaysia.

Katimon, Ayob (2004) Water Table Management For Upland Crops: A Theoretical Modelling Investigation. Jurnal Teknologi B (40B). pp. 1-14. ISSN 0127-9696

Katimon, Ayob and Abd. Wahab, Ahmad Khairi (2003) Hydrological Analysis Of A Drained Peat Basin Using Time Series Correlation And Crosscorrelation Functions. Jurnal Teknologi B (39B). pp. 63-74. ISSN 0127-9696

Katimon, Ayob and Mohd. Yunos, Mohd. Zulkifli (2003) Flood potential estimation of two small vegetated watersheds. Jurnal Kejuruteraan Awam, 15 (1). pp. 1-15. ISSN 0128-0147

Katimon, Ayob (1997) Steady state open drainage system for minimizing fire hazard on peat areas. Jurnal Kejuruteraan Awam, 10 (2). pp. 12-19. ISSN 0128-0147

Katimon, Ayob and Abd. Wahab, Ahmad Khairi (2003) Hydrologic characteristics of a drained tropical peat catchment : runoff coefficients, water table and flow duration curves. Jurnal Teknologi B (38B). pp. 39-54. ISSN 0127-9696

Katimon, Ayob and Lulie, Melling (2007) Moisture retension curve of tropical sapric and hemic peat. Malaysian Journal of Civil Engineering, 19 (1). pp. 84-90. ISSN 1823-7843

Katimon, Ayob and Mat Hassan, Abd Mutallib (1997) Field hydraulic conducfivity of some malaysian peat. Jurnal Kejuruteraan Awam, 10 (1). pp. 14-20. ISSN 0128-0147

Katimon, Ayob and Demun, Amat Sairin (2005) A study of flow theory towards the different degree of tropical peat decomposition. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Katiran, Norshidah and Fisal, Norsheila and Syed Yusof, Sharifah Kamilah and Mohamad Maharum, Siti Marwangi and Ab. Ghafar, Aimi Syamimi and Saparudin, Faiz Asraf (2011) Inter-cell interference mitigation and coordination in comp systems. Communications in Computer and Information Science, 253 (PART 3). pp. 654-665. ISSN 1865-0929

Kebria, D. Y. and Taghizadeh, M. and Camacho, J. V. and Latifi, N. (2016) Remediation of PCE contaminated clay soil by coupling electrokinetics with zero-valent iron permeable reactive barrier. Environmental Earth Sciences, 75 (8). ISSN 1866-6280

Kermani, Emad Pouryazdanpanah (2013) Simulation of fluid-solid flow using lattice Boltzman method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Keyvanfar, Ali and Shafaghat, Arezou and Abd. Majid, Muhd. Zaimi and Lamit, Hasanuddin and Hussin, Mohd. Warid and Ali, Kherun Nita and Dhafer Saad, Alshahri (2014) User satisfaction adaptive behaviors for assessing energy efficient building indoor cooling and lighting environment. Renewable and Sustainable Energy Reviews, 39 . pp. 277-295. ISSN 1364-0321

Khademi, Tayebeh and Ismail, Kamariah and Chew, Tin Lee and Shafaghat, Arezou (2015) Enhancing commercialization level of academic research outputs in research university. Jurnal Teknologi, 74 (4). pp. 141-151. ISSN 2180-3722

Khalajmasoumi, Mohammad (2013) Computational modelling of hard polyethylene precast panel for temporary supporting of tunnel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Nazifa (2010) A study on electronic waste (e-waste) in high educational institution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Nor Ikhwan (2010) Adhesion on different rate of binder and aggregate for chip seal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalil Abad, Seyed Vahid Alavi Nezhad and Mohamad, Edy Tonnizam and Komoo, Ibrahim and Kalatehjari, Roohollah (2015) A typical weathering profile of granitic rock in Johor, Malaysia based on joint characterization. Arabian Journal of Geosciences, 8 (4). pp. 2191-2201. ISSN 1866-6280

Khamidun, Mohd. Hairul and Mohamad Ali, Fulazzaky and Md. Din, Mohd. Fadhil and Mohd. Yusoff, Abdull Rahim (2014) Resistance of mass transfer, kinetic and isotherm study of ammonium removal by using a Hybrid Plug-Flow Column Reactor (HPFCR). Environment, Energy and Sustainable Development - Proceedings of the 2013 International Conference on Frontier of Energy and Environment Engineering, ICFEEE 2013, 1 . pp. 555-559.

Khan, Ilyas and Ali, Farhad and Shafie, Sharidan (2013) Stokes' second problem for magnetohydrodynamics flow in a burgers' fluid: the cases γ= λ2/4 and γ> λ2/4. PLOS One, 8 (5). pp. 1-18. ISSN 1932-6203

Khan, M. M. H. and Guong Wei, L. and Deepak, T. J. and Nair, S. (2016) Use of oil palm shell as replacement of coarse aggregate for investigating properties of concrete. International Journal of Applied Engineering Research, 11 (4). pp. 2379-2383. ISSN 0973-4562

Khan, S. R. M. and Noozaei, J. and Kadir, M. R. A. and Waleed, A. M. T. and Jaafar, M. S. (2007) UPV method for strength detection of high performance concrete. Structural Survey, 25 (1). pp. 61-73. ISSN 0263-080X

Khandelwal, Manoj and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Majid, Muhd Zaimi Abd. and Monjezi, Masoud (2016) Function finding for indirect determination of rock brittleness based on genetic programming and non-linear multiple regression models. Engineering with Computers . pp. 1-9. ISSN 0177-0667 (In Press)

Khanjanzadeh, Arman (2010) Assessment of pedestrian and motorized traffic-mix in town. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khankhaje, E. and Salim, M. R. and Mirza, J. and Hussin, M. W. and Rafieizonooz, M. (2016) Properties of sustainable lightweight pervious concrete containing oil palm kernel shell as coarse aggregate. Construction and Building Materials, 126 . pp. 1054-1065. ISSN 0950-0618

Khankhaje, Elnaz and Hussin, Mohd. Warid and Mirza, Jahangir and Rafieizonooz, Mandi and Salim, Mohd. Razman and Siong, Ho Chin and Mohd. Warid, Muhammad Naqiuddin (2016) On blended cement and geopolymer concretes containing palm oil fuel ash. Materials & Design, 89 . pp. 385-398. ISSN 0264-1275

Khari, Mahdy and Kassim, Khairul Anuar and Adnan, Azlan (2014) Sand samples’ preparation using mobile pluviator. Arabian Journal for Science and Engineering, 39 (10). pp. 6825-6834. ISSN 1319-8025

Khatib, Anwar (2000) Keupayaan galas model asas rakit berusuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kheimeh Sari, Hirbod Maleki (2014) Evaluating the surface properties of HA coating on Co-Cr based alloy substrate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khezri, N. and Mohamad, H. and Fatahi, B. (2016) Stability assessment of tunnel face in a layered soil using upper bound theorem of limit analysis. Geomechanics and Engineering, 11 (4). pp. 471-492. ISSN 2005-307X

Khezri, Nima and Mohamad, Hisham and HajiHassani, Mohsen and Fatahi, Behz (2015) The stability of shallow circular tunnels in soil considering variations in cohesion with depth. Tunnelling and Underground Space Technology, 49 . pp. 230-240. ISSN 8858-977

Khin, Maung Zaw and Mohamed, Zainai and Saleh, Abd. Latif and Abu Bakar, Suhaimi (2005) A modified stress model to predict the ultimate bending strength of solid timber beams using plastic approach. Jurnal Kejuruteraan Awam, 17 (2). pp. 30-45. ISSN 0128-0147

Khin, Maung Zaw (2002) An evaluation of ultimate strength and the performance of timber beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khodadadi, Touraj and Alizadeh, Mojtaba and Gholizadeh, Somayyeh and Zamani, Mazdak and Darvishi, Mahdi (2015) Security analysis method of recognition-based graphical password. Jurnal Teknologi, 72 (5). pp. 57-62. ISSN 0127-9696

Khoshnava, Seyed Meysam and Rostami, Raheleh and Ismail, Mohammad and Valipour, Alireza (2014) The using fungi treatment as green and environmentally process for surface modification of natural fibres. Applied Mechanics and Materials, 554 . pp. 116-122. ISSN 1660-9336

Khoshnava, Seyed Meysam and Rostami, Raheleh and lsmail, Mohammad (2015) Steering green and sustainability through life cycle assessment software's in construction industry. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Khoshnoud, H. R. and Marsono, Abdul Kadir (2011) Assessment of performance of buildings with high importance factor through non-linear static and dynamic procedure. International Journal on Recent Trends in Engineering and Technology, 5 (3). pp. 17-22. ISSN 2158-5563

Khoshraftar, Alireza (2012) Developing the customer relationship management (crm) in health care organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khudhair, Ameer Badr and Tony, Hadibarata and Mohd. Yusoff, Abdull Rahim and Zee, Chuang Teh and Adnan, Liyana Amalina and Kamyab, Hesam (2015) Pyrene metabolism by new species isolated from soil rhizoctonia zeae SOL3. Water, Air, and Soil Pollution, 226 (6). p. 186. ISSN 0049-6979

Kibria, Mahmud Arman and Rahman, Saidur and Al-Sulaiman, Fahad A. and A. Aziz, Md. Maniruzzaman (2016) Development of a thermal model for a hybrid photovoltaic module and phase change materials storage integrated in buildings. Solar Energy, 124 . pp. 114-123. ISSN 0038-092X

Kidam, Kamarizan and Hurme, Markku (2012) Analysis of equipment failures as contributors to chemical process accidents. Process Safety And Environmental Protection, 91 . pp. 61-78. ISSN 0957-5820

Kikuchi, Akira and Hakim, Luhcman and Heryansyah, Arien and Romaidi, Romaidi (2010) Significance of the easy-to-use water quality checker for participative environmental monitoring and experience based learning. International Journal of Tropical Life, 1 (1). pp. 17-21. ISSN 2087-5517

Kim, S. J. and Kim, J. H. J. and Yi, S. T. and Md. Noor, N. B. and Kim, S. C. (2016) Structural performance evaluation of a precast PSC curved girder bridge constructed using multi-tasking formwork. International Journal of Concrete Structures and Materials, 10 . ISSN 2234-1315

Kirby, P. A. and Nethercot, D. A. and Mohammed Ali, Nasly (Penterjemah) (1993) Reka bentuk untuk kestabilan struktur. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–88–6

Kling, Sohaimi (2007) Determination of domestic wastewater chracteristics and its relation to the type and size of developments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koay, Chee Ming (2010) Equipment failure mode and effects analysis (FMEA) in Altera Corporation (M) SDN. BHD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koay, Michael (2003) Stress concentration factors for tubular joints using LUSAS software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kobarajah, Liknaswaran (2007) Load transfer behaviour of bored piles in old alluvium formation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kobayashi, Akira and Coyle, W. T. and Mostaghimi, J. and Yuguswaran, S. (2015) Influence of transferred arc plasma processing parameters on transferred arc plasma processing parameters on mullite-zirconia composite formation. In: Advances In Applied Plasma Science /Isaps 2015, 21 Aug - 4 Sept, 2015.

Kok, Kai Chern (2001) Physical, geochemistry and mineralogy studies on the strength development of lime stabilised cohesive soils. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koloor, S. S. R. and Abdul-Latif, A. and Tamin, Mohd. Nasir (2011) Mechanics of composite delamition under flexural loading. Key Engineering Materials, 462-46 . pp. 726-731. ISSN 1013-9826

Kong, Ling Kai (2008) Performance of mechanical coupler for connection of precsast concrete wall panels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kong, Weng Hoong (2009) Finite element analysis of beam to column end plate connections on major axis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koo, Shi Qi (2015) Absorption energy of layered structures due to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Koo, Wee Seng (2002) Strengthening of reinforced concrete column using CFRP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Krishnan, Santhana and Singh, Lakhveer and Mimi Sakinah, Mimi Sakinah and Thakur, Sveta and A. Wahid, Zularisam and Sohaili, Johan (2016) Effect of organic loading rate on hydrogen (H2) and methane (CH4) production in two-stage fermentation under thermophilic conditions using palm oil mill effluent (POME). Energy for Sustainable Development, 34 . pp. 130-138. ISSN 0973-0826

Ku Sulaiman, Ku Safirah (2010) Seismic behaviour of tunnels with different soil types and depths. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kueh, A. B. H. and Tan, C. S. and Tahir, M. M. and Shek, Poi Ngian (2011) Experimental investigation of end-plate connection with cruciform column section. In: International Conference On Civil Engineering, Architecture And Building Materials (CEABM).

Kueh, Ahmad and Tan, Cher Siang and Md Tahir, Mahmood and Shek, Poi Ngian and Mohammad, Shahrin (2011) Structural behavior of combined flange-cleat and gusset plate connection for cold -formed steel double channel sections. In: 2nd International Symposium On Mechanical Science And Technology (ISMST 2011).

Kueh, Ahmad Beng Hong (2012) Fitting-free hyperelastic strain energy formulation for triaxial weave fabric composites. Mechanics Of Materials, 47 . pp. 1-23. ISSN 0167-6636

Kueh, Ahmad Beng Hong (2014) Size-influenced mechanical isotropy of singly-plied triaxially woven fabric composites. Composites Part A-Applied Science and Manufacturing, 57 . pp. 76-87. ISSN 1359-835X

Kueh, Ahmad Beng Hong and Shek, Poi Ngian and Tan, Cher Siang and Md. Tahir, Mahmood (2011) Maximum local thermal effects carpet plot for symmetric laminated composite plates. In: Advanced Building Materials. Advanced Materials Research, 250-25 . Trans Tech Publications, Switzerland, pp. 3748-3751. ISBN 978-303785127-2

Kumar, Ravinder and Lakhveer, Singh and Abdul Wahid, Zularisam and Md. Din, Mohd. Fadhil (2015) Exoelectrogens in microbial fuel cells toward bioelectricity generation: a review. International Journal of Energy Research, 39 (8). pp. 1048-1067. ISSN 0363-907X

Kumaresan, Sivakumar (2008) A process engineering approach to the standardization of eurycomanone in eurycoma longifolia water extract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kuok, King Kuok (2010) Parameter optimization methods for calibrating tank model and neural network for rainfall-runoff modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kurniawan, Denni and Kim, Byungsun and Lee, Hoyong and Lim, Joongyeon (2015) Towards improving mechanical properties of basalt fiber/polylactic acid composites by fiber surface treatments. Composite Interfaces, 22 (7). pp. 553-562. ISSN 0927-6440

L

Lai, Khin Wee and Hum, Yan Chai and Supriyanto, Eko (2011) An object-oriented approach of generic diffusion computing for three dimensional ultrasound volumetric images. International Journal of Physical Sciences, 6 (30). pp. 6995-7006. ISSN 1992-1950

Lai, Shien Nang (2001) An investigation on the performance of unburnt brick. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lai, Tze Khai (2007) Determination of earthquake design criteria for fixed offshore structures located in Malaysia region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lai, Tze Wee (2010) Verification of boundary integral equation for conformal mapping of doubly connected regions onto a disk with a slit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lai, Yoke Chin (2000) Laboratory study of static and dynamic condition monitoring for structural integrity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Laily Roslan, Rose Diyana (2010) Brick material for construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lamide, J. A. and Mohamed, R. N. and Abd. Rahman, A. B. (2016) Experimental results on the shear behaviour of steel fibre self-compacting concrete (SFSCC) beams. Jurnal Teknologi, 78 (11). pp. 103-111. ISSN 0127-9696

Lamide, Juli Asni and Mohamed, Roslli Noor (2015) Fresh properties and mechanical properties of steel fibre self-compacting concrete. In: Asia Pacific Structural Engineering & Construction Conference 2015, 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Latifi, N. and Marto, A. and Eisazadeh, A. (2016) Experimental investigations on behaviour of strip footing placed on chemically stabilised backfills and flexible retaining walls. Arabian Journal for Science and Engineering, 41 (10). pp. 4115-4126. ISSN 1319-8025

Latifi, N. and Meehan, C. L. and Majid, M. Z. A. and Horpibulsuk, S. (2016) Strengthening montmorillonitic and kaolinitic clays using a calcium based non traditional additive: a micro level study. Applied Clay Science, 132-32 . pp. 182-193. ISSN 0169-1317

Latifi, N. and Rashid, A. S. A. and Siddiqua, S. and Majid, M. Z. A. (2016) Strength measurement and textural characteristics of tropical residual soil stabilised with liquid polymer. Measurement: Journal of the International Measurement Confederation, 91 . pp. 46-54. ISSN 0263-2241

Latifi, Nima and A. Rashid, Ahmad Safuan and Marto, Aminaton and Md. Tahir, Mahmood (2016) Effect of magnesium chloride solution on the physico-chemical characteristics of tropical peat. Environmental Earth Sciences, 75 (3). pp. 1-9. ISSN 1866-6280

Latifi, Nima and Eisazadeh, Amin and Marto, Aminaton (2014) Strength behavior and microstructural characteristics of tropical laterite soil treated with sodium silicate-based liquid stabilizer. Environmental Earth Sciences, 72 (1). pp. 91-98. ISSN 1866-6299

Lau, Hui Hie (2013) Economic aspect of square hollow section (SHS) in the design of multi-storey unbraced steel frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lau, Woei Jye and Gray, Stephen and Matsuura, T. and Emadzadeh, Daryoush and Chen, J. Paul and Ismail, Ahmad Fauzi (2015) A review on polyamide thin film nanocomposite (TFN) membranes: history, applications, challenges and approaches. Water Research, 80 . pp. 306-324. ISSN 0043-1354

Lau , Bok Lih (2004) Development of operational procedures for the integration of mapping and cadastral data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lau , Chia Sing (2004) Poor construction documentation : causes and impact on client's organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Law, Kim Hing (2008) Performance of multi-propped deep excavation in Kenny Hill formation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lawan, Mustapha Muhammad and Md. Tahir, Mahmood (2015) Strength capacity of bolted shear connectors with cold-formed steel section integrated as composite beam in self-compacting concrete. Jurnal Teknologi, 77 (16). pp. 105-112. ISSN 0127-9696

Lawan, Mustapha Muhammad and Md. Tahir, Mahmood and Mirza, Jahangir (2016) Bolted shear connectors performance in self-compacting concrete integrated with cold-formed steel section. Latin American Journal of Solids and Structures, 13 (4). pp. 731-749. ISSN 1679-7817

Lawan, Mustapha Muhammad and Md. Tahir, Mahmood and Shek, Poingian and Sulaiman, Arizu (2015) Structural performance of cold-formed steel section in composite structures: a review. Jurnal Teknologi, 74 (4). pp. 165-175. ISSN 0127-9696

Lazim, Z. M. and Hadibarata, T. (2016) Ligninolytic fungus Polyporus sp. S133 mediated metabolic degradation of fluorene. Brazilian Journal of Microbiology, 47 (3). pp. 610-616. ISSN 1517-8382

Lazim, Zainab Mat and Hadibarata, Tony and Puteh, Mohd. Hafiz and Yusop, Zulkifli (2015) Adsorption characteristics of bisphenol a onto low-cost modified phyto-waste material in aqueous solution. Water, Air, and Soil Pollution, 226 (3). p. 34. ISSN 0049-6979

Lee, Yee Ling and Tan, Chersiang and Lee, Yeonghuei and Mohammad, Shahrin and Tahir, Mahmood Md Md and Shek, Poingian (2013) Effective steel area of fully embedded cold-formed steel frame in composite slab system under pure bending. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012, 2 November 2012 through 6 November 2012, Kaohsiung; Taiwan.

Lee, Cen Ying (2007) Principles of implied terms in construction contracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Choon Siang (2003) Behaviour of columns with semi-rigid end restraints in non-sway frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Foo Wei (2009) Cable stayed bridge construction : case study of Sungai Johor cable stayed bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, H. P. and Awang, A. Z. and Omar, W. (2016) Short term durability of steel-strap confined concrete. Jurnal Teknologi, 78 (7). pp. 99-106. ISSN 0127-9696

Lee, Hong Yong (2009) Finite element analysis on beam to column minor axis bolted end plate connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Hoong Pin and Awang, Abdullah Zawawi and Omar, Wahid (2013) Behaviour of Steel Strapping Tensioning Technique (SSTT) confined high-strength concrete with different lateral pre-tensioning stresses. In: The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013) , 16th - 17th April 2013, UTM Skudai, Johor, Johor Bahru.

Lee, Hoong Pin and Awang, Abdullah Zawawi and Omar, Wahid (2015) Behaviour of steel straps confined concrete column with lateral pre-tensioning stresses under uniaxial cyclic compression. In: APSEC 2015, 2-5 Nov, 2015, Kuala Lumpur, Malaysia.

Lee, Hoong Pin and Awang, Abdullah Zawawi and Omar, Wahid (2016) Short term durability of SSTT confined high strength concrete. Jurnal Teknologi, 78 (7). pp. 99-106. ISSN 0127-9696

Lee, Hoong-Pin and Awang, Abdullah Zawawi and Omar, Wahid (2014) Steel strap confined high strength concrete under uniaxial cyclic compression. Construction and Building Materials, 72 . pp. 48-55. ISSN 0950-0618

Lee, Hoong-Pin and Awang, Abdullah Zawawi and Omar, Wahid (2014) Strength and ductility of high-strength concrete cylinders externally confined with steel strapping tensioning technique (SSTT). Jurnal Teknologi (Sciences and Engineering), 68 (1). pp. 109-118. ISSN 2180-3722

Lee, Lee Min and Gofar, Nurly and Rahardjo, Harianto (2009) A simple model for preliminary evaluation of rainfall-induced slope instability. Engineering Geology , 108 (3-4). pp. 272-285. ISSN 00137952

Lee, Lin Jye (2009) The superintendent officer's roles and authorities in contributing towards better environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Lip Voon (2010) Effects of land use on river and estuarine water quality at Johor straits and its subsequent effects on green mussels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Yee Hwai and Hashim, Mazlan and Arshad, Ahmad Sabirin (2007) Vicarious Calibration Site Selection For Razaksat™ Medium-Sized Aperture Camera (Mac). In: International Workshop on Earth Observation Small Satellites for Remote Sensing Applications (EOSS2007), 20-23 November 2007, Berjaya Times Square Hotel and Convention Centre, KL.

Lee, Yee Loon (1999) Strength development and water permeability of timber industrial ash concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Yeong Huei and Tan, Cher Siang and Mohammad, Shahrin and Lee, Yee Ling (2015) Mechanical properties prediction for cold-formed steel angle connection with various flange cleat thickness. Jurnal Teknologi, 74 (4). pp. 52-59. ISSN 2180-3722

Lee, Yeonghuei and Tan, Chersiang and Lee, Yee Ling and Tahir, Mahmood Md Md and Mohammad, Shahrin and Shek, Poingian (2013) Numerical modelling of stiffness and strength behaviour of top-seat flange-cleat connection for cold-formed double channel section. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012;, 2 November 2012 through 6 November 2012, Kaohsiung; Taiwan.

Leow, Pei Ling and Lee, Johnathan Swee Tian (2011) Microscale fluid flow in honeycomb micromixer. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 85-99. ISBN 978-967-354-184-3

Liang, Maybelle and Mohamad, Edy Tonnizam and Komoo, Ibrahim and Ma, Chau-Khun (2015) Excavation assessment in wet tropically sedimentary rock. Jurnal Teknologi, 76 (2). pp. 81-87. ISSN 2180-3722

Liang, Maybelle and Mohamad, Edy Tonnizam and Ma, Chau Khun and Alel, Mohd. Nur Asmawisham (2015) Estimating uniaxial compressive strength of tropically weathered sedimentary rock using indirect tests. Jurnal Teknologi, 73 (2). pp. 49-58. ISSN 2180-3722

Liew, Daniel Yu Chuan and Abdullah, Redzuan and Bakar, Khairul Bariyah (2008) Behaviour and load bearing capacity of composite slab enhanced with shear screws. Malaysian Journal of Civil Engineering, 20 (2). pp. 284-294. ISSN 1823-7843

Liew, Lee Ping (2009) Contract administrators as independent and impartial certifiers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew, Taik Hwa (2002) New apparatus for skid testing : assessment for dusty surfaces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Tian Fuh (2015) Construction stage analysis of a post-tensioned segmental crosshead. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Vui Jen (2008) Analysis of extendable IBS steel truss. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Samsung and Rizos, Chris and Musa, Tajul A (2008) Application of Running Average Function to Non-Dispersive Errors of Network-Based Real-Time Kinematic Positioning. Journal of Global Positioning Systems (2006), 7 (2). pp. 148-155. ISSN 1446-3156

Lim, Gim Loon (2002) Non-linear finite element analysis (NLFEA) of circular slab for aqueous liquid retaining structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, H. S. and Wee, T. H. and Mansur, M. A. and Kong, K. H. (2006) Flexural behavior of reinforced lightweight aggregate concrete beams. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Lim, Jee Wen (2015) Undrained shear strength of overconsolidated cohesive soil using modified rowe cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Jit Kheng (2000) Soil classification comparison between dry and wet sieving on cohesive soils using BSCS and USCS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Ming Han and Haron, Zaiton and Jahya, Zanariah and Darus, Nadirah and Abdul Hamid, Mohamad Fauzi (2015) A prototyping model of intelligent hearing protection device. Jurnal Teknologi, 74 (4). pp. 1-6. ISSN 0127-9696

Lim, Ming Han and Haron, Zaiton and Yahya, Khairulzan and Abu Bakar, Suhaimi and Dimon, Mohamad Ngasri (2015) A stochastic simulation framework for the prediction of strategic noise mapping and occupational noise exposure using the random walk approach. Plos One, 10 (4). ISSN 1932-6203

Lim, S. K. and Zakaria, F. and Hussin, M. W. and Muhamad, R. (2006) Effect of GGBFS as filler in polyester grout on strength development and flowability. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Lim, S. K. and Zakaria, F. and Hussin, M. W. and Muhamad, R. (2006) Effect of slag content to cement grout on the compressive strength development in tropical weather environment. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Lim, Siong Kang and Hussin, Mohd. Warid (2008) Effect of filler on strength development of epoxy grout. Malaysian Journal of Civil Engineering, 20 (1). pp. 38-46. ISSN 1823-7843

Lim, Siong Kang and Hussin, Mohd. Warid and Zakaria, Fadhadli and Ling, Tung Chai (2009) GGBFS as potential filler in polyester grout : flexural strength and toughness. Construction and Building Materials, 23 (5). pp. 2007-2015. ISSN 09500618

Lim, Siongkang and Tan, Chersiang and Zhao, Xiao and Ling, Tung Chai (2014) Strength and toughness of lightweight foamed concrete with different sand grading. KSCE Journal of Civil Engineering, 19 (7). pp. 2191-2197. ISSN 1226-7988

Lim , Wai Shien (2004) Application of EFCO E-form panel system RC shear wall design in Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim , Wey Heng (2004) Precast construction database management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Jen Hua and Abd. Rahman, Ahmad Baharuddin and Mirasa, Abdul Karim and Abd. Hamid, Zuhairi (2008) Performance of cs-sleeve under direct tensile load: part 1: failure modes. Malaysian Journal of Civil Engineering, 20 (1). pp. 89-106. ISSN 1823-7843

Ling, Jeng Hua and Abd. Rahman, Ahmad Baharudin and Mirasa, Abdul Karim and Abd. Hamid, Zuhairi (2008) Performance of cs-sleeve under direct tensile load: part II: structural performance. Malaysian Journal of Civil Engineering, 20 (1). pp. 107-127. ISSN 1823-7843

Ling, Tung Chai and Md. Nor, Hasanan (2006) Plant trial production process and monitoring of crumb rubber concrete paver. In: National Seminar on Civil Engineering Research (SEPKA 2006), 19th - 20th December 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Ling, Tung Chai and Md. Nor, Hasanan (2007) Properties of crumb rubber concrete paving blocks with and without facing layer. In: Persidangan Kebangsaan AWAM 2007, 29th - 31st May 2007, Hotel Helang, Pulau Langkawi, Kedah Darul Aman.

Ling, Tung Chai and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Chik, Abdul Aziz (2008) Laboratory performance of crumb rubber concrete block pavement. International Journal of Pavement Engineering . ISSN 1029-8436

Ling, Tung Chai and Md. Nor, Hasanan and Ming, Fai Chow (2007) Highway accelerated loading instrument (HALI) testing on permanent deformation for concrete block pavement. In: 7th Malaysia Road Conference 2007, 17th - 19th July 2007, Kuala Lumpur, Malaysia.

Ling, Tung Chai and Md. Nor, Hasanan and Ming, Fai Chow (2008) Permanent deformation of concrete block pavements under highway accelerated loading. Road Engineering Association of Asia and Australia (REAAA) Journal, 15 (1). pp. 1-8.

Ling, Tung Chai and Siong, Kang Lim and Hussin, Mohd. Warid and Zakaria, Fadhadli (2008) GGBFS as potential filler in polyester grout : flexural strength and toughness. Construction and Building Materials . pp. 1-9.

Ling, Tung Chai and Md. Nor, Hasanan and Hainin, Mohd. Rosli (2008) Properties of crumb rubber concrete paving blocks with SBR latex. Road Materials and Pavements Design . pp. 1-10.

Ling, J. H. and Abd. Rahman, A. B. and Ibrahim, I. S. and Abdul Hamid, Z. (2016) Tensile capacity of grouted splice sleeves. Engineering Structures, 111 . pp. 285-296. ISSN 0141-0296

Ling, Jen Hua (2011) Behaviour of grouted splice connections in precast concrete walls subjected to tensile, shear and flexural loads. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Jen Hua and Abd. Rahman, Ahmad Baharuddin and Ibrahim, Izni Syahrizal and Abdul Hamid, Zuhairi (2012) Behaviour of grouted pipe splice under incremental tensile load. Construction and Building Materials, 33 . pp. 90-98. ISSN 0950-0618

Ling, L. and Yusop, Z. (2016) Mean, median or something else. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9706-9711. ISSN 1819-6608

Ling, Peter Chuan Chang (2007) Bonding behaviour between CFRP and steel plates to concrete prisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Tung Chai and Hainin, Mohd. Rosli and Ming, Fai Chow (2006) Highway accelerated loading instrument (HALI) for concrete block pavement. In: National Seminar on Civil Engineering Research (SEPKA 2006), 19th - 20th December 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Ling, Tung Chai and Md. Nor, Hasanan (2007) Effect of curing conditions on the compressive strength of crumb rubber concrete paving blocks. In: World Engineering Congress 2007, 5-9 August 2007, Penang, Malaysia.

Ling, Tung Chai and Mudiyono, Rachmat (2006) The effect of cement and water cement ratio on concrete paving block. In: Regional Postgraduate Conference on Engineering and Science (RPCES 2006), 26th - 27th July 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Liua, Zhijun and Kingerya, William L. and Huddlestonb, David H. and Hossain, Faisal and Hashim, Noor Baharim and Kieffer, Janna M. (2008) Assessment of water quality conditions in the St Louis Bay watershed. Journal Of Environmental Science And Health Part A-Toxic/Hazardous Substances & Environmental Engineering , 43 . 468 -477. ISSN 1093-4529

Lo Presti, Davide and Abdul Hassan, Norhidayah and Khan, Rawid and Airey, Gordon D. (2015) Reclaimed asphalt test specimen preparation assisted by image analysis. Journal of Materials in Civil Engineering, 27 (8). ISSN 0899-1561

Loh, Hsi Yoon (2008) Development of grouted splice sleeve and its performance under axial tension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loh, Wee Loon (2010) Performance of pullout resistance of anchored earth system by field pullout test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lok, Siew Chin (2014) The practice of time management in construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lok, Siew Chin and Abdul Hamid, Abdul Rahim (2015) The practice of time management on construction project. In: The 5th Euro Asia Civil Engineering Forum Conference (EACEF5), 15-18 Sept, 2015, Indonesia.

Loo, Chang Soon (2009) Flexural performance of rice husk - high density polyethylene (HDPE) bio - composites profile deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loo, Khee Hui (2015) Timber clinker as partial replacement of 20mm natural coarse aggregate in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lotf, Ebrahim Abouzari and Romainodin, Ayuni and El-Sayed Nasef, Mohamed Mahmoud and Ahmad, Arshad and Mohan, V. Jacob and Abdollahi, Yadollah and Bazaka, Kateryna (2015) Electrospinning of high performance polymers for application in proton exchange membrane fuel cell. In: 4th Conference on Emerging Energy and Process Technology (CONCEPT2015), 12 Jun, 2015, Italy.

Low, Tian Hock (2010) Vibration based damage detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Low, Wen Pei (2015) River treatment using biofilm growth on coconut and oil palm cellulosic fibres. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lwti, Nabeel Katfan (2015) Assessment of disturbance impact of hydraulic jack in pile penetration using artificial transparent clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M

M. Arif, M. Farid and Setan, Halim and Chong, Albert K. (2006) An overview: NIR imaging system for medical photogrammetry applications. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

M. Ariff, M. Farid and Setan, Halim and Ahmad, Anuar and Majid, Zulkepli and Chong, Albert K. (2005) Measurement of the human face using close-range digital photogrammetry technique. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

M. Ashaari, Norul Izzati (2007) Electronic document management system in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M. Aziz, NurAznim and Hashim, Mazlan (2007) Mapping of urban above-ground biomass with high resolution remote sensing data. In: The 28th Asian Conference on Remote Sensing 2007, 12-16 November 2007, PWTC, Kuala Lumpur, Malaysia.

M. Idris, Khairulnizam and Setan, Halim (2007) Automatic data gathering dan processing software solution for industrial deformation analysis. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor International Convention Centre,Johor Bahru, Johor.

M. K., Aisyah and Viswanathan, Kodakkal Kannan and Abdul Aziz, Zainal and Javed, Saira (2015) Free vibration of symmetric angly-plane layered truncated conical shells under classical theory. In: Global Academic Network Conference, 12-15 Feb, 2015, United Kingdom.

Ma, C. K. and Awang, A. Z. and Garcia, R. and Omar, W. and Pilakoutas, K. (2016) Behaviour of over-reinforced high-strength concrete beams confined with post-tensioned steel straps - an experimental investigation. Structural Concrete, 17 (5). pp. 768-777. ISSN 1464-4177

Ma, C. K. and Awang, A. Z. and Garcia, R. and Omar, W. and Pilakoutas, K. and Azimi, M. (2016) Nominal curvature design of circular HSC columns confined with post-tensioned steel straps. Structures, 7 . pp. 25-32. ISSN 2352-0124

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2016) Flexural ductility design of confined high-strength concrete columns: theoretical modelling. Measurement: Journal of the International Measurement Confederation, 78 . pp. 42-48. ISSN 0263-2241

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2015) Load-deformation behaviour of eccentrically loaded SSTT-confined high strength concrete columns. Jurnal Teknologi, 74 (4). pp. 45-50. ISSN 2180-3722

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid (2014) Slenderness limit for SSTT-confined HSC column. Structural Engineering and Mechanics, 50 (2). pp. 201-214. ISSN 1225-4568

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Liang, Maybelle and Jaw, Siow Wei and Azimi, Mohammadamin (2016) Flexural capacity enhancement of rectangular high-strength concrete columns confined with post-tensioned steel straps: experimental investigation and analytical modelling. Structural Concrete, 17 (4). pp. 668-676. ISSN 1464-4177

Ma, Chau Khun and Awang, Abdullah Zawawi and Omar, Wahid and Pilakoutas, Kypros and Mohd. Tahir, Mahmood and Garcia, Reyes (2015) Elastic design of slender high-strength RC circular columns confined with external tensioned steel straps. Advances in Structural Engineering, 18 (9). pp. 1487-1499. ISSN 2048-4011

Ma, Chau Khun and Mohd. Apandi, Nazirah and Siew Yung, Sofrie Chin and Ng, Jen Hau and Lo, Wen Haur and Awang, Abdullah Zawawi and Omar, Wahid (2017) Repair and rehabilitation of concrete structures using confinement: a review. Construction and Building Materials, 133 . pp. 502-515. ISSN 0950-0618

Ma, Chow Khun and Awang, Abdullah Zawawi and Omar, Wahid (2013) Eccentrically loaded externally confined HSC columns. In: GEOCON 2013, 2013.

Maarof, Ismail and Setan, Halim (2005) 3D modeling and photogrammetric measurement procedure for architecture and industrial applications. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Maarof, Saleha (2014) Structural, luminescence and electrical conductivity of strontium titanate thin films prepared by dip coating method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Maarof, Saleha and Deraman, Karim and Wan Shamsuri, Wan Nurulhuda and Ismail, Bakar and Mat, S.Asiah (2013) Microstructure studies of strontium titanate thin films prepared by so-gel dip-coating method. Malaysian Journal of Fundamental and Applied Sciences, 9 (3). pp. 134-138. ISSN 1823-626X

Mad. Rosni, Nurul Najihah (2016) Effect of fineness coconut shell charcoal ash on the rheological properties of bitumen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Madi, Nassir Bsher (2009) Groundwater study for shallow alluvium aquifer at Kota Bharu, Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Maghsoudi, Mohammad Javad and Ibrahim, Zuwairie and Buyamin, Salinda and Rahmat, Mohd. Fua’ad (2012) Data clustering for the DNA computing readout method implemented on lightcycler and based on particle swarm optimization. Arabian Journal of Science and Engineering, 37 (3). pp. 697-707. ISSN 1319-8025

Mahad, Farah Diana and M. Supa’at, Abu Sahmah and Idrus, Sevia Mahdaliza and Forsyth, David (2012) Analyses of semiconductor optical amplifier (SOA) four-wave mixing (FWM) for future all-optical wavelength conversion. Optik . ISSN 0030-4026

Mahamod Sarkoni, Sahidatul Fariza (2011) Simplified business continuity planning guideline for Universiti Teknologi Malaysia, center for information and communication technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahamud, Rosadah (2006) Ekonomi perbandaran. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mahamud, Rosadah (1999) Teknologi bangunan. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mahdiyar, Amir and Abdullah, Arham and Tabatabaee, Sanaz and Mahdiyar, Leily and Mohandes, Saeed Reza (2015) Investigating the environmental impacts of green roof installation. Jurnal Tekonologi, 76 (1). pp. 265-273. ISSN 2180-3722

Mahgoub Hamadelnil, Abdelrahim Musa (2014) Optimum analysis of offshore structures lifting padeyes using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahin, Mohd. Azrul Hisham (2015) Automatic wireless accelerometer monitoring system (AWAM) for slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahjoub, Reza and Mohamad Yatim, Jamaludin and Mohd. Sam, Abdul Rahman and Hashemi, Sayed Hamid (2014) Tensile properties of kenaf fiber due to various conditions of chemical fiber surface modifications. Construction and Building Materials, 55 . pp. 103-113. ISSN 0950-0618

Mahmood, Md. Tahir and Mirasa, Karim and Osman, Mohd.Hanim (1998) Limiting sway for unnbraced steel frame with column bending on minor axis. Jurnal Teknologi (29). pp. 7-21. ISSN 0127-9696

Mahmoud Farouq, Murtala (2015) Road maintenance management in Kano State: case study at Kano Metropolitan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmoudian, Peyman (2009) Properties of acrylic polymer modified concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Razali and Ghazali, Noorzalianee (2006) The new challenge in automation pilotage system for stringent port navigation. In: International Symposium and Exhibition on Geoinformation 2006, 19-21 Sept 2006, Shah Alam, Selangor.

Mahmud, Ahmad Fahmi (2011) Safe welding parameter for inner hull repair works on LNG carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Mahadzer (Penterjemah) (1993) Masalah kajidaya tanah dan kejuruteraan asas peringkat ijazah. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–78–0

Mahmud, Mohd. Razali (1994) Report: Special Training on Hydrographic Surveying in Canada 4 June -16 September, 1994. Buletin Ukur, 5 (3). pp. 233-235. ISSN 0128-4274

Mahmud, Mohd. Razali and Cham, Tau Chia (2005) Dissemination of chart information using web-based GIS. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Mahmud, Mohd. Razali and Ghazali, Noorzalianee (2005) Development of marine digital database system for navigational aid at coastal area. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Mahmud, Mohd. Razali and M. D. E. K., Gunathilaka (2007) Effects of inadequate surface sound speed measurements in multibeam echosounder systems. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Mahmud, Mohd. Razali and M. D. E. K., Gunathilaka and Tang, Kelvin Kang Wee (2007) An Appraisal of Multibeam Echosounder Calibration. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor International Convention Centre, Johor Bahru, Johor.

Mahmud, Mohd. Razali and Mohd. Yusof, Othman (2005) Automatic filtering of far outliers in multibeam echo sounding dataset using robust detection algorithms. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Mahmud, Mohd. Razali and Mohd. Yusof, Othman (2006) The implementation of post-processing data thinning for multibeam echo sounding data. In: International Symposium and Exhibition on Geoinformation 2006, 19-21 Sept 2006, Shah Alam, Selangor.

Mahmud, Mohd. Razali and Othman, Rusli and Din, Usmuni (2008) Application of real time tidal acquisition and processing system for hydrographic survey and dredging operations. Project Report. Faculty of Geoinformation Science and Engineering, Skudai, Johor. (Unpublished)

Mahmud, Mohd. Razali and Othman, Rusli and Din, Usmuni and Mardi, Ahmad ShahIan (1995) The studies on the rate of sedimentation at Bekok Dam using hydrographic technique. In: Seminar Penyelidikan Fakulti Ukur Dan Harta Tanah, UTM (1995), 26 Julai 1995, Hyatt Regency Hotel, Johor Bahru.

Mahmud, Mohd. Razali and Othman, Rusli and Mardi, A. Shahlan and Din, Usmuni (1996) Hidrografi asas. Documentation. Faculty of Geoinformation Science & Engineering, Universiti Teknologi Malaysia.

Mahmud, Mohd. Razali and Purwanto, Hery (2005) Teori pasang surut. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mahmud, Mohd. Razali and Tan, Tai Hung (2006) Tides during monsoon season in Peninsular Malaysia. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept. 2006, Subang Jaya, Selangor, Malaysia.

Mahmud, Mohd. Razali and Tengku Ali, Tengku Afrizal (2006) Development of safe navigation system for tidal restriction area. In: International Symposium and Exhibition on Geoinformation 2006, 19-21 Sept 2006, Shah Alam, Selangor.

Mahmud, Mohd. Razali and Tengku Ali, Tengku Afrizal (2005) Navigational aid system with dynamic tide. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Mahmud, Mohd. Zul Hanif (2013) Influence of flaky aggregate towards creep and resilient modulus on asphalt concrete 20. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Razali and Chai, Beng Chung (2006) GIS: The key to success in submarine pipeline routing. In: International Symposium and Exhibition on Geoinformation 2006, 19-21 Sept 2006, Shah Alam, Selangor.

Mahmud, Mohd Razali (1995) Calibration Tests For Underwater Acoustic Transponders Using Kalman Filter. Buletin Ukur, 6 (1). pp. 39-60. ISSN 0128-4274

Mahrami, M. and Rahmani, R. and Seyedmahmoudian, M. and Mashayekhi, R. and Karimi, H. and Hosseini, E. (2016) A hybrid metaheuritic technique developed for hourly load forecasting. Complexity, 21 . pp. 521-532. ISSN 1076-2787

Maiye, Olumorin Michael (2014) The effect of tropical weathering on the strength and anisotropy index of weathered shale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Majid, Zulkepli and Chong, A and Setan, Halim and Ahmad, Anuar and Rajion, Zainul (2006) Natural Features Technique for Non-Contact Three Dimensional Craniofacial Anthropometry Using Stereophotogrammetry. Archives of Orofacial Sciences, 1 . pp. 42-50.

Majid, Zulkepli and Chong, Albert K and Ahmad, Anuar and Setan, Halim and Samsudin, Abdul Rani (2005) Photogrammetry and 3D laser scanning as spatial data capture techniques for a national craniofacial database. The Photogrammetric Record, 20 (109). pp. 48-68.

Majid, Zulkepli and Chong, Albert K. and Setan, Halim and Ahmad, Anuar (2005) Three dimensional craniofacial anthropometry using stereophotogrammetry: validation of the technique. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Majid, Mohamad Zaki (2010) Beam-to-column connection using hollow steel section for precast concrete frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Majid, Z. A. and Mohsin, R. and Yusof, M. Z. (2011) Experimental and computational failure analysis of natural gas pipe. Engineering Failure Analysis, 19 . pp. 32-42. ISSN 1350-6307

Majid, Zulkepli (2008) Design and calibration of multi-modal imaging system for craniofacial soft tissue mapping. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Majid, Zulkepli and Mat Lela, Mohamed Said (1995) Rekabentuk peta tematik dengan perisian CorelDRAW. In: Seminar Penyelidikan Fakulti Ukur Dan Harta Tanah, UTM (1995), 26 Julai 1995, Hyatt Regency Hotel, Johor Bahru.

Majid, Zulkepli and Setan, Halim and Chong, Albert K. (2006) Alignment of 3D laser scanner point clouds using photogrammetric targets. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Majid, Zulkepli (1997) Penentuan Koordinat Bumi (X,Y,Z) Dengan Teknik Transformasi Kaedah Langsung(DLT) Untuk Aplikasi Fotogrametri Jarak Dekat. Buletin Geoinformasi, 1 (3). pp. 139-147. ISSN 1394-7702

Majidnia, Z. and Fulazzaky, M. A. (2016) Photoreduction of Pb(II) ions from aqueous solution by titania polyvinylalcohol–alginate beads. Journal of the Taiwan Institute of Chemical Engineers, 66 . pp. 88-96. ISSN 1876-1070

Makhtar, Ahmad Mahir (1996) Engineering properties of polymer mortar composites in hot humid environment. Jurnal Kejuruteraan Awam, 9 (2). pp. 25-33. ISSN 0128-0147

Makhtar, Ahmad Mahir (1999) The influence of environmental conditions on creep behaviour of polymer mortars. Jurnal Kejuruteraan Awam, 11 (1). pp. 34-20. ISSN 0128-0147

Makhtar, Ahmad Mahir and Jusoh, Siti Norafida and Marto, Aminaton and Tan, Choy Soon (2015) Undrained behaviour of Johor sand in cyclic triaxial test. In: Fifth International Conference on Geotechnique, Construction Materials And Environment, Osaka, Japan, 16-18 Nov, 2015, Japan.

Maleka, Abdulmalik Musa (2013) Effect of palm oil fuel ash (POFA) fineness on the properties of asphaltic concrete AC14. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Maleka, Abdulmalik Musa and Alkali, Ibrahim Abubakar and Putra Jaya, Ramadhansyah (2014) The indirect tensile strength of Palm Oil Fuel Ash (POFA) modified asphaltic concrete. Applied Mechanics and Materials, 587-58 . pp. 1270-1275. ISSN 1660-9336

Maleka, Abdulmalik Musa and Alkali, Ibrahim Abubakar and Putra Jaya, Ramadhansyah (2014) The indirect tensile strength of Palm Oil fuel ash (POFA) modified asphaltic concrete. In: 4th International Conference on Civil Engineering, Architecture and Building Materials, CEABM 2014, 24-25 May, 2014, Haikou, China.

Maleka, Abdulmalik Musa and Hamad, Ahmed Wsoo and Putra Jaya, Ramadhansyah (2015) Effect of palm oil fuel ash (Pofa) on the durability of asphaltic concrete. In: Tenth TheIIER International Conference, 12 Feb, 2015, Kuala Lumpur, Malaysia.

Malekian, Reza and Abdullah, A. H. (2011) A mathematical model to determine the maximum end-to-end delay bound on label switched path for real time applications over mobile IPV6. International Journal of Physical Sciences, 6 (12). pp. 2958-2964. ISSN 1992-1950

Mallum, Isa (2015) Flexural performance of steel fiber reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mamat, Rosmawati and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Abdul Rahman, Noor Azah and Mohd. Warid, Muhammad Naqiuddin and Idham, Mohd. Khairul (2015) A review of performance asphalt mixtures using bio binder as alternative binder. Jurnal Teknologi, 77 (23). pp. 17-20. ISSN 0127-9696

Manap, Norhafizah (2015) The effect of coconut shells on engineering properties of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mandal, Nirmal Kumar (1998) The study of structure-borne vibration power flow in orthotropic plates by the method of structural intensity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Maniruzzaman, M. A. A. and Rahman, M. T. and Rosli Haininl, M. and Abu, W. A. W. B. (2016) Alternative binders for flexible pavement. ARPN Journal Of Engineering and Applied Sciences, 11 (20). pp. 11868-11871.

Mansor, Nur Fatiha Nadia (2016) Modelling of reinforced concrete beam by using plasticity approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansor, Shariwati and Mohamed, Roslli Noor (2015) Shear behaviour of permanent precast formwork beams. In: Asia Pacific Structural Conference & Construction Conference 2015, 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mansour, F. R. and Parniani, S. and Ibrahim, Izni Syahrizal (2011) Experimental study on effects of steel fiber volume on mechanical properties of SFRC. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 144-148. ISBN 978-303785063-3

Mansour, Farnoud Rahimi (2010) Flexural behavior of precast concrete slab with steel fibre concrete topping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansour, Farnoud Rahimi and Abu Bakar, Suhaimi and Ibrahim, Izni Syahrizal and Marsono, Abdul Kadir and Marabi, Bahram (2015) Flexural performance of a precast concrete slab with steel fiber concrete topping. Construction and Building Materials, 75 . pp. 112-120. ISSN 0950-0618

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2011) CO2 stripping from water through porous PVDF follow fiber membrane contactor. Desalination, 273 . pp. 386-390. ISSN 0011-9164

Mansur, M. A. and Tan, King Hwee and Weng, W. (2006) Analysis of concrete beams with circular web openings using strut and tie models. Malaysian Journal of Civil Engineering, 18 (2). pp. 89-98. ISSN 1823-7843

Mansur, M. A. (2006) Design of reinforced concrete beams with web openings. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mansur, Mohammad A. and Maalej, Mohamed Amine and Ismail, Mohamed Amri (2008) Study on corrosion durability of ferrocement. ACI Materials Journal, 105 (1). 28 -34. ISSN 0889-325X

Mansur, Shaiful Amri (1999) Identifying the worker's philosophy in. construction firms by using the mcgregor's assumptions. Jurnal Kejuruteraan Awam, 11 (1). pp. 122-130. ISSN 0128-0147

Mansur, Shaiful Amri and Che Wan Putra, C. W. F. and Mohamed, A. H. (2003) Productivity Assessment and Schedule Compression Index (PASCI) for project planning. In: Proceedings of the 5th Asia-Pacific Structural Engineering and Construction Conference , 26-28 August 2003, Johor Bahru, Johor, Malaysia.

Mansur, Shaiful Amri and Md. Ali, Kamarudin and Mohamad Zin, Rosli (2007) Jenis dan punca keretakan pada struktur bangunan. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, UTM.

Mansur, Shaiful Amri and Mohamad, Mohamad Ibrahim and Mohamad Zin, Rosli and Chooi, Chee Kong (2008) Knowledge transferring process in earthwork contracting firms. Malaysian Journal of Civil Engineering, 20 (1). pp. 30-39. ISSN 1823-7843

Manzari, M.T and Morgan, K (1999) A compressible turbulent flow solver for complex 3d configurations. Jurnal Kejuruteraan Awam, 11 (2). pp. 1-13. ISSN 0128-0147

Manzur, Tanvir and Ahmed Noor, Munaz (2006) Displacement based fragility curves for R.C.C. frame structures in context of Dhaka, Bangladesh. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mar Iman, Abdul Hamid (1999) GIS-MRA Techniques in Property Valuation: A Framework for Implementation. Buletin Geoinformasi, 3 (1). pp. 63-79. ISSN 1394-7702

Mar Iman, Abdul Hamid (2007) An introduction to property marketing first edition. Manual. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mar Iman, Abdul Hamid (1998) Kaedah penyelidikan untuk pelajar harta tanah edisi pertama. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mar Iman, Abdul Hamid (2007) Penilaian harta tanah hutan edisi pertama. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Marghany, Maged (2012) DEM reconstruction of coastal geomorphology from Dinsar. Lecture Notes In Computer Science (Including Subseries Lecture Notes In Artificial Intelligence And Lecture Notes In Bioinformatics), 7335 L (PART 3). pp. 435-446.

Marghany, Maged (2011) Modelling shoreline rate of changes using holographic interferometry. International Journal of Physical Sciences, 6 (34). pp. 7694-7698. ISSN 1992-1950

Marghany, Maged and Hashim, Mazlan (2007) Fuzzy algorithm for 3D coastal gemorphology mapping by DInSAR. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor International Convention Centre,Johor Bahru, Johor.

Marghany, Maged and Hashim, Mazlan and Cracknell, Arthur P. (2007) Quasi linear algorithm for modelling shoreline change from AIRSAR/POLSAR polarized data. In: International Workshop on Earth Observation Small Satellites for Remote Sensing Applications (EOSS2007), 20-23 November 2007, Berjaya Times Square Hotel and Convention Centre, KL.

Marghany, Maged and Hashim, Mazlan and Cracknell, Arthur P. (2007) Utilization of TiungSAT-1 data for modelling sea surface current. In: International Workshop on Earth Observation Small Satellites for Remote Sensing Applications (EOSS2007), 20-23 November 2007, Berjaya Times Square Hotel and Convention Centre, KL.

Marghany, Maged and Hashim, Mazlan and Moradi, Farideh (2011) Object recognitions in radarsat-1 sar data using fuzzy classification. International Journal of Physical Sciences, 6 (16). pp. 4038-4043. ISSN 1992-1950

Marghany, Maged Mahmoud and Hashim, Mazlan (2012) Automatic detection algorithms for oil spill from multisar data. In: Progress in Electromagnetics Research Symposium (PIERS 2012), 27-30 Mar 2012, Kuala Lumpur, Malaysia.

Marghany, Maged and Hashim, Mazlan and Cracknell, Arthur P. (2007) Modeling sea surface current circulation from satellite altimetry data by using first order volterra model. In: International Workshop on Earth Observation Small Satellites for Remote Sensing Applications (EOSS2007), 20-23 November 2007, Berjaya Times Square Hotel and Convention Centre, KL.

Marghany , Maged and Hashim, Mazlan (2006) Interferometry for coastal spit geomorphology mapping. Proceedings of the 27th Asian Conference on Remote Sensing, Ulanbator, Mongolia . 11pp.

Marghany , Maged and Hashim, Mazlan (2006) Simulation of Tsunami Wave Spectra on Sri-Lanka and Indonesia. Proceedings of the 27th Asian Conference on Remote Sensing, Ulanbator, Mongolia . 6pp.

Marsid, Ezzah Atikah and Sugiura, Norio and Zakaria, Zuriati and Othman, Nor’Azizi and Utsumi, Motoo and Iwamoto, Koji and Goto, Masafumi and Hara, Hirofumi (2015) Microbial diversity in disturbed and undisturbed peat swamp forest and isolation of cyanobacteria. In: International Conference on Sustainability Initiatives (ICSI 2015) in conjunction with 8th ASEAN Environmental Engineering Conference (AEEC), 24-25 August, 2015, Kuala Lumpur, Malaysia.

Marsono, A. K. and Hatami, S. (2016) Analysis of reinforced concrete shear walls with single band of octagonal openings. KSCE Journal of Civil Engineering, 20 (5). pp. 1887-1894.

Marto, Aminaton and Kasim, Fauziah and Yusof, Mohd. Fairus (2004) Ciri-ciri kejuruteraan tanah baki granit di Semenanjung Malaysia. Jurnal Kejuruteraan Awam, 16 (2). pp. 1-14. ISSN 0128-0147

Marto, Aminaton (1996) Critical state of keuper marl silt. Jurnal Kejuruteraan Awam, 9 (2). pp. 34-58. ISSN 0128-0147

Marto, Aminaton (1999) Pore pressure response of undrained two-way cyclic loading of silt. Jurnal Kejuruteraan Awam, 11 (1). pp. 35-62. ISSN 0128-0147

Marto, Aminaton and Abdullah, Mohamad Hafeezi and Ahir Makhtar, Ahmad Mahir and Sohaei, Houman and Choy, Soon Tan (2015) Surface settlement induced by tunneling in greenfield condition through physical modelling. Jurnal Teknologi, 76 (2). pp. 1-7. ISSN 0127-9696

Marto, Aminaton and Aziz, Norazirah and Jahidin, Mohammed Ridzuan and Mohd. Yunus, Nor Zurairahetty and Kasim, Fauziah and Choy, Soon Tan (2015) Soft soil improvement using chemical-rubber chips mixture. Jurnal Teknologi, 76 (2). pp. 103-108. ISSN 0127-9696

Marto, Aminaton and Boss, Sanjay and Ahir Makhtar, Ahmad Mahir and Latifi, Nima (2015) Strength characteristic of brown kaolin treated with liquid polymer additives. Jurnal Teknologi, 76 (2). pp. 89-94. ISSN 0127-9696

Marto, Aminaton and Latifi, Nima and Janbaz, Masoud and Kholghifard, Mehrdad and Khari, Mahdy and Alimohammadi, Payman and Banadaki, Arash Dehghan (2012) Foundation size effect on modulus of subgrade reaction on sandy soils. Electronic Journal of Geotechnical Engineering, 17 S . pp. 2523-2530. ISSN 1089-3032

Marto, Aminaton and Makhtar, Ahmad Mahir and Masayuki, Hyodo and Hasan, Muzamir (2014) Shear strength parameters and consolidation of clay reinforced with single and group bottom ash columns. Arabian Journal for Science and Engineering, 39 (4). pp. 2641-2654. ISSN 1319-8025

Marto, Aminaton and Mohd Yunus, Nor Zurairahetty and Pakir, Faizal and Latifi, Nima and Mat Nor, Ahmad Hakimi and Tan, Choy Soon (2015) Stabilization of marine clay by biomass silica (non-traditional) stabilizers. In: Applied Mechanics and Materials, 2015.

Marto, Aminaton and Nor, Aidil Rosly and Choy, Soon Tan and Kasim, Fauziah and Mohd. Yunus, Nor Zurairahetty and Moradi, Razieh (2016) Bearing capacity of soft clay installd with singular and group of encased bottom ash columns. Jurnal Teknologi, 78 (7-3). pp. 105-110. ISSN 2180-3722

Marto, Aminaton and Oghabi, Mohsen and Mohd. Yunus, Norzurairahetty (2014) Effect of depth placement of geocell reinforcement in sand: a review. In: National Seminar on Civil Engineering Research (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Marto, Aminaton and Othman, Bakhtiar Affandy and Kasim, Fauziah and Bakar, Ismail (2012) Comparison of field performance between bamboo-geotextile composite embankment and high strength geotextile embankment. Advanced Materials Research, 587 . pp. 77-80. ISSN 1022-6680

Marto, Aminaton and Tan, Choy Soon and Kasim, Fauziah (2012) Liquefaction potential of soils at Iskandar Malaysia Region. In: AWAM International Conference on Civil Engineering (AICCE'12) and Geohazard Information Zonation (GIZ'12).

Marto, Aminaton and Tan, Choy Soon and Makhtar, Ahmad Mahir and Jusoh, Siti Norafida (2016) Cyclic behaviour of Johor sand. International Journal of Geomate, 10 (3). pp. 1891-1898. ISSN 21862-982

Marto, Aminaton and Choy, Soon and Makhtar, Ahmad Mahir and Mohd. Yunus, Nor Zurairahetty and Amaludin, Adriana (2013) Undrained shear strength of sand with plastic fines mixtures. Malaysian Journal of Civil Engineering, 25 (2). pp. 189-199. ISSN 1823-7843

Marto, Aminaton and Kasim, Fauziah (2003) Characterisation of Malaysian residual soils for geotechnical and construction engineering. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Maruti @ Ezani, Syaza Faiqah and Amerudin, Shahabuddin and Wan Kadir, Wan Hazli and Abdul Rahman, Muhammad Zulkarnain and Mohamed Yusof, Zainab and Ariffin, Azman (2016) The assessment of the proposed dams in reducing flood hazard by using hydrodynamic modelling approach. In: The 11th International Civil Engineering Post Graduate Conference - The 1st Symposium on Expertise of Engineering Design (SEPKA-ISEED 2016), 2016, Skudai, Johor.

Maruti @ Ezani, Syaza Faiqah and Amerudin, Shahabuddin and Wan Kadir, Wan Hazli and Abdul Rahman, Muhammad Zulkarnain and Mohamed Yusof, Zainab and Ariffin, Azman and Tam, Tze Huey (2016) Hydrodynamic modelling of a proposed Lebir and Galas dam for flood hazard analysis. Malaysian Journal of Civil Engineering (MJCE), 28 (3). pp. 223-239. ISSN 1823-7843

Marwah, Mohd. Khatta (2004) Ciri-ciri kejuruteraan dan simulasi kelakuan tanah liat lembut di bawah tambakan cubaan Muar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marziah, Z. and Mahdzir, A. and Musa, M. N. and Jaafar, A. B. and Azhim, A. and Hara, H. (2016) Abundance of sulfur-degrading bacteria in a benthic bacterial community of shallow sea sediment in the off-Terengganu coast of the South China Sea. MicrobiologyOpen, 5 (6). pp. 967-978. ISSN 2045-8827

Mashros, Nordiana and Rahman, Raha and Johnnie, B. E. (2012) Exploring the extent of critical gap acceptance caused by rainfall in Malaysia. ARPN Journal of Engineering and Applied Sciences, 7 (12). pp. 1664-1668. ISSN 1819-6608

Masimin, Masimin and Harun, Sobri (2008) Analysis for annual maximum precipitation series for state of selangor using probability weighted moments. In: Stochastic Methods in Design Storm Estimations. Penerbit UTM , Johor, pp. 31-60. ISBN 978-983-52-0576-7

Masri, Mohd. Irsyam Noorfawana (2015) Flood mapping for Sungai Bunus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Amin, Zulkarnaini and David R., Twigg (2001) A technique to reduce correlated errors in continuous monitoring applications. In: ION-GPS 2001, 11 - 14 September 2001, Salt Palace Convention Center, Salt Lake City, Utah.

Mat Amin, Zulkarnaini and Kamaruddin, Md. Nor and Wan Mohd. Akib, Wan Abdul Aziz (2003) Pengesanan selisih berbilang laluan gps melalui cerapan pelbagai antena. In: Malaysian Science and Technology Congress 2003 (MSTC 2003), 23-25 September 2003, Cititel, Midvalley, Kuala Lumpur.

Mat Amin, Zulkarnaini and Wan Mohd. Akib, Wan Abd. Aziz and Setan, Halim (2003) Experimental works on the use of kinematic GPS positioning in continuous monitoring applications. Geoinformation Science Journal .

Mat Amin, Zulkarnaini and Wan Mohd. Akib, Wan Abd. Aziz and Tan, Han Yeong and Nordin, Zuhaidah (2005) The impact of radome on the GPS observation. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World, 27-29 September 2005, Pulau Pinang.

Mat Amin, Zulkarnaini and Wan Mohd. Akib, Wan Abdul Aziz (2003) Experimental detection of the Penang bridge vibration with real time kinematic gps. In: International Symposium And Exhibition On Geoinformation 2003, 13 - 14 Oktober 2003, Hotel Grand Blue Wave, Shah Alam, Selangor.

Mat Amin, Zulkarnaini and Wan Mohd. Akib, Wan Abdul Aziz (2002) The time series analysis in GPS structural monitoring schemes. In: Map Asia 2002 , 07 - 09 Ogos 2002, Bangkok, Thailand.

Mat Amin, Zulkarnaini (2007) Automasi ukur prosidur dan perlaksanaan menggunakan perisian CDS dan AutoCAD. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi. (Unpublished)

Mat Amin, Zulkarnaini (1996) Digital map update using carrier phase handheld GPS. Buletin Ukur, 7 (2). pp. 110-118. ISSN 0128-4274

Mat Amin, Zulkarnaini (2005) Field to finish : prosidur dan perlaksanaan menggunakan perisian CDS dan AutoCad. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi. (Unpublished)

Mat Ariff, Shahidah (2007) Pengaturcaraan Fortran untuk jurukur. Documentation. FKSG, UTM Skudai, FKSG.

Mat Darus, Intan Zaurah and Zahidi Rahman, Tuan A. and Mailah, Musa (2011) Experimental evaluation of active force vibration control of a flexible structure using smart material. International Review of Mechanical Engineering (IREME), 5 (6). pp. 1088-1094. ISSN 1970-8734

Mat Desa, Mohd Shaiful Zaidi and Hassan, Azman and Arsad, Agus (2013) The effect of natural rubber toughening on mechanical properties of poly(lactic acid)/ multiwalled carbon nanotube nanocomposite. In: Advanced Materials Research (Volume 747).

Mat Din, Mazura and Md. Nor, Norhazilan and Ngadi, Md. Asri and Abd. Razak, Khadijah and Md. Siraj, Maheyzah (2011) Automated matching systems and correctional method for improved inspection data quality. International Journal of Computer Theory and Engineering, 3 (2). pp. 248-254. ISSN 1793-8201

Mat Jan, Nur Amalina (2014) Estimating distribution parameters of extreme event using TL-moment method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mat Kiah, M. H. and M. Kasmani, R. (2013) Experimental study on premixed flame acceleration in closed pipe. Jurnal Teknologi (Science & Engineering), 62 (1). pp. 45-51. ISSN E-ISSN 2180-3722

Mat Lazim, Zainab and Elina Mazuin, Elina Mazuin and Hadibarata, Tony and Yusop, Zulkifli (2015) The removal of Methylene Blue and Remazol Brilliant Blue R dyes by using orange peel and spent tea leaves. Jurnal Teknologi, 74 (11). pp. 129-135. ISSN 0127-9696

Mat Lazim, Zainab and Hadibarata, Tony and Puteh, Mohd. Hafiz and Yusop, Zulkifli and Wirasnita, Riry and Mohd. Nor, Nurafifah (2015) Utilization of durian peel as potential adsorbent for bisphenol a removal in aquoeus solution. Jurnal Teknologi, 74 (11). pp. 109-115. ISSN 0127-9696

Mat Lazim, Zainab and Zulkifli, Nur Syazlin and Hadibarata, Tony and Yusop, Zulkifli (2015) Removal of cresol red and reactive black 5 dyes by using spent tea leaves and sugarcane baggase powder. Jurnal Teknologi, 74 (11). pp. 147-151. ISSN 0127-9696

Mat Lazin, Nor Ain (2014) Erodable dam breaching patterns due to overtopping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Lela, Mohamed Said (1993) Forest Inventory Using Satellite Optical and Radar Remote Sensing with Ancillary Data. Buletin Ukur, 4 (2). pp. 56-64. ISSN 0128-4274

Mat Raffei, Anis Farihan (2013) Reflection removal and feature extraction techniques in non-cooperative visible eye images for iris recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mat Rejab, Mohd. Ruzaimi (2004) Polymeric foam as core of side-door impact beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Salleh, Nurfazilah (2012) Effect of overheating of bitumen on hot mix asphalt properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Saman, M. Z. and Abdul Halim, S. A. (2007) Development of a computer based training for recycling and dismantling information system. In: Prosiding Kebangsaan Awam '07, 2007, Langkawi.

Mat Tahir, Mohd. Narowi (2009) The establishment of a selection guideline for construction of reinforced earth wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Yahaya, Fadzil (2003) Pengaruh abu terbang kelapa sawit terhadap kekuatan mampatan dan ketahanlasakan konkrit berudara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Yusof, Nur 'Ain (2016) Empirical strenqth envelope for shale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Yusoff, Norhan (2000) Pengesanan perubahan litupan tanah dan hutan bakau dengan kaedah remote sensing berdigit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Yusop, Norwahida Azwani (2010) Calibration of soil moisture accounting (SMA) parameters in Sungai Johor river basin using hydrologic model HEC-HMS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Matlan, Siti Jahara (2009) Backanalysis of rainfall induced landslide in Sabah by Perisi Model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Matori, Mohd. Yazip (2013) Factors influencing the strength of foamed bitumen stabilised mix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Matthew Lee, Hsien Loong (2014) Temperature sensor placement for multiple fault detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Maulana, Dimas (2011) The study on impact of project delay to construction cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mazlan, Dianah and Abdul Awal, A. S. M (2012) Properties of cement based composites containing oil palm stem as fiber reinforcement. Malaysian Journal of Civil Engineering (MJCE), 24 (2). pp. 107-117. ISSN 1823-7843

Mazlan, Erita Mazwin (2009) A critical investigation on the incorporation of IBS knowledge into the Polytechnic academic curriculum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mazlan, Saifu Amri and Abu, Ainudin and Md. Daud, Mohd. Yusop and Zamzuri, Hairi (2010) Study on the conformational behaviour of magnetorheological fluid in squeeze mode. Project Report. Razak School of Engineering and Advanced Technology, Skudai, Johor. (Unpublished)

Mazlan, Saiful Amri (2011) Experimental characterization of magnetorheological fluid in squeeze mode. In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Md Tahir, Mahmood (1997) Wind-moment design for unbraced frames with bending about both column axes. Jurnal Kejuruteraan Awam, 10 (1). pp. 42-60. ISSN 0128-0147

Md. Ali, Kamaruddin (Translator) (1993) Kuantiti kejuruteraan awam. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-9585-89-4

Md. Amin, Md. Azman (1993) Engineering characteristics of cement treated Malaysian black soil. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Aripin, Mohd. Akhmal (2014) Plastic analysis of concrete beam structure using LUSAS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Ayob, Shahrin (2011) Field programmable gate array (FPGA) based fuzzy logic controller for boost converter. Project Report. Fakulti Kejuruteraan Elektrik, Skudai, Johor. (Unpublished)

Md. Din, M. F. and Ujang, Zaini and Van Loosdrecht, M. C. M. and Ahmad, A. and Sairan, M. F. (2006) Optimization of nitrogen and phosphorus limitation for better biodegradable plastic production and organic removal using single fed-batch mixed cultures and renewable resources. Water Science and Technology, 53 (6). pp. 15-20. ISSN 0273-1223

Md. Din, Mohd. Fadhli and Ujang, Zaini and Loosdrecht, Mark Van and Mohd. Yunus, Salmiati and Ahmad, Mohd. Azlan (2006) Polyhydroxyalkanoates (PHAs) production from aerobicmixed cultures. Malaysian Journal of Civil Engineering, 18 (2). pp. 109-128. ISSN 1823-7843

Md. Din, Mohd. Fadhil and Aris, Azmi and Salim, Mohd. Razman and Abu Bakar, Wan Azlee (2005) Heterogeneous photodegradation of orange G under the influence of added oxidising agents using TiO2 thin film. Jurnal Kejuruteraan Awam, 17 (2). pp. 60-68. ISSN 0128-0147

Md. Din, Mohd. Fadhil and Chek Rani, Siti Haryani (2007) Respirometric analysis in palm oil mill effluent (POME). In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Low, Wen Pei and Fulazzaky, Mohamad Ali and Iwao, Kenzo and Songip, Ahmad Rahman and Chelliapan, Shreeshivadasan and Ismail, Zulhilmi and Jamal, Mohamad Hidayat (2016) Removal rate of organic matter using natural cellulose via adsorption isotherm and kinetic studies. Water Environment Research, 88 (2). pp. 118-130. ISSN 1061-4303

Md. Din, Mohd. Fadhil and Zainon Noor, Zainura and Mohd. Yusof, Mohd. Badruddin (2007) Solid waste management system using mobile incinerator in small community. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Md. Hassan, Ruhaidah and Pung, Astley and Salim, Razma and Salledh, Zulkhairin and Ide, Hisao (2006) Application of hipolka KM as a bio-remediation in Bandara Seri Alam oxidation pond. The Ingenieur, 28 . pp. 58-61. ISSN 0128-4347

Md. Hussin, Mohd. Bakery and Setan, Halim and Majid, Zulkepli and Suwardhi, Deni (2005) Statistical shape analysis for computer aided facial deformity detection. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Md. Hussin, Mohd. Bakery and Setan, Halim and Majid, Zulkepli and Suwardhi, Deni (2006) Statistical shape analysis using landmark for craniofacial classification. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Md. Isa, Mohamed Fauzi (2011) Effects of moisture content on the strength of weathered granite in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Lani, Ruzaini and Setan, Halim and Chong, Albert K. and Majid, Zulkepli (2006) Cephalometric measurements: comparison between analog X-Ray film and digital cephalometric image. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Md. Lani, Ruzaini and Setan, Halim and Majid, Zulkepli and Chong, A. K. (2005) Precision of landmark identification using scanned cephalometric image. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Md. Noor, Mohd. Amirul Hakim (2015) Evaluation of compactive effort and time available for compaction on hot mix asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Noor, Norhazilan (2008) Corrosion resistant steel bar. In: Corrosion of Steel in Concrete. Penerbit UTM , Johor, pp. 154-176.

Md. Noor, Norhazilan (2008) Electrochemical method. In: Corrosion of Steel in Concrete. Penerbit UTM , Johor, pp. 1-21. ISBN 978-983-52-0570-5.

Md. Noor, Norhazilan (2007) Optimising the use pigging data in pipeline reliability assessment. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, UTM.

Md. Noor, Norhazilan and Ismail, Mohammad (2007) A semi probabilistic prediction of remaining strength of corroded steel pipelines using DNC RP-F101. In: World Engineering Congress 2007-The 3rd Frontiers of Engineering Global Challenges and Issues, 2007, Penang.

Md. Noor, Norhazilan and Nor Ozman, Nor Apaziah and Yahaya, Nordin (2011) Deterministic prediction of corroding pipeline remaining strength in marine environment using DNV RP -F101 (Part A). Journal of Sustainability Science and Management, 6 (1). pp. 69-78. ISSN 1823-8556

Md. Noor, Norhazilan and Nor Ozman, Nor Apaziah and Yahaya, Nordin and Mohd. Ali Napiah, Mohd. Nazmi and Abdullah, Zaabah (2010) PICA: pipeline integrated corrosion assessment tool for structure integrity. Malaysian Journal of Civil Engineering, 22 (2). pp. 246-263. ISSN 1823-7843

Md. Noor, Norhazilan and Sing, L. K. and Yahaya, Nordin and Abdullah, A. (2011) Corrosion study on X70-carbon steel material influenced by soil engineering properties. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 875-880. ISBN 978-303785214-9

Md. Noor, Norhazilan and Smith, George H. and Yahaya, Nordin (2007) The weibull time-dependent growth model of marine corrosion in seawater ballast tank. Malaysian Journal of Civil Engineering, 19 (2). pp. 142-155. ISSN 1823-7843

Md. Noor, Norhazilan and Smith, George H. and Yahaya, Nordin (2007) The weibull time-dependent growth model of marine corrosion in seawater ballast tank. In: Prosiding Kebangsaan Awam'07, 29th - 31st May 2007, Langkawi, Malaysia.

Md. Noor, Norhazilan and Yahaya, Nordin (2007) Projecting the likehood of corrosion pit distribution in seawater ballast tank using weibull model. In: International Conference On Engineering Technology (ICET 2007), 2007, Universiti Kuala Lumpur, Kula Lumpur Malaysia.

Md. Noor, Norhazilan and Yahaya, Nordin (2006) Statistical analysis of seawater ballast tank corrosion data. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Md. Noor, Norhazilan and Yahaya, Nordin and Mat Din, Mazura and Nor Ozman, Nor Apaziah (2009) Prediction of corroding pipeline remaining life-time using semi-probabilistic approach. Malaysian Journal of Civil Engineering, 21 (2). pp. 204-218. ISSN 1823-7843

Md. Noor, Norhazilan and Yahaya, Nordin and Sarvari, Hadi and Valipour, Alireza (2014) Risk ranking of Malaysian public private partnership projects. Applied Mechanics and Materials, 567 . pp. 613-618. ISSN 1660-9336

Md. Noor, Norhazilan (2002) Reliability-based assessment of offshore pipeline subjected to internal corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Nor, Hasanan and Ismail, Che Ros (2006) The effect of thickness and laying pattern of paver on concrete block pavement. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Nujid, Masyitah (2007) Deformation and stability analysis of a cut slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Rabani , Norman (2010) Improving safety control of PWD project through the inclusion of safety requirement in the bill of quantity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Rozali, S. and Rahmat, Mohd. Fua'ad and Husain, Abdul Rashid (2012) Backstepping design for position tracking control of nonlinear system. In: 2012 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2012).

Md. Saad, Nor Syafawani Sarah and Nik Malek, Nik Ahmad Nizam and Chong, Chun Shiong (2016) Antimicrobial activity of copper kaolinite and surfactant modified copper kaolinite against gram positive and gram negative bacteria. Jurnal Teknologi, 78 (3-2). pp. 127-132. ISSN 0127-9696

Md. Said, Mohd. Ismid (2012) Determination of heavy metals and Polycyclic Aromatic hydrocarbons (PAH) contents using the lichen dirinaria picta in Universiti Kebangsaan Malaysia. In: Conference.

Md. Said, Mohd. Ismid and Arman, Nor Zaiha and Azman, Shamila and Mohd. Safeai, Shahrul Azri (2012) Benthic macroinvertebrate as an alternative tool for biological monitoring in assessing river water quality. In: Conference.

Md. Said, Najhan (2004) Prosedur, teknik dan hitungan bagi kalibrasi ujian tindihan terhadap sistem pemerum gema berbilang alur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Salleh, Salihatun (2002) Kajian getaran ke atas rasuk dan pengurangannya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Sawari, Siti Salwa and Ghazali, Mohd. Al’Ikhsan Ikhsan and Ibrahim, Mohd. Burhan and Mustapha, Nurul Izzah (2015) Evidence based review on the effect of Islamic dietary law towards human development. Mediterranean Journal of Social Sciences, 6 (3). pp. 136-141. ISSN 2039-9340

Md. Shukri, D'yia Sarah (2013) Image enhancement and unified segmentation approach in motion-blurred image for iris recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Md. Som, Zainal Abidin (2005) The implementation of variance component estimation (vce) using MINQE approach into an adjustment of height networks. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Md. Som, Zainal Abidin (1996) Penentuan komponen varians bagi cerapan jaringan deformasi menggunakan kaedah minimum norm quadratic estimation - minqe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Som, Zainal Abidin (1999) SGU 3203 ukur kejuruteraan industri (Bahagian 1). Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Md. Som, Zainal Abidin (2000) SGU 3203 ukur kejuruteraan industri (Bahagian 2). Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Md. Som, Zainal Abidin and Aziz, Anual (2006) The adjustment of regional levelling network using in-house developed software. In: International Symposium & Exhibition on Geoinformation 2006 (ISG2006), 19-21 Sept 2006, Subang Jaya, Selangor, Malaysia.

Md. Som, Zainal Abidin (2003) Pengenalan instrumentasi dan pengukuran EDM. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Md. Tahir, Mahmood and Sulaiman, Arizu (2008) Standardisation of partial strength connections of extended end-plate connections for trapezoid web profiled steel sections. Malaysian Construction Research Journal, 2 (1). pp. 14-41. ISSN 1985-3807

Md. Tahir, Mahmood and Tan, Cher Siang and Thong, Chin Mun (2005) Application of partial strength connection in the design of multi-storey braced steel frame using trapezoidal web profiled section. Jurnal Kejuruteraan Awam, 17 (1). pp. 23-38. ISSN 0128-0147

Md. Tahir, Mahmood (2007) Ultimated axial load of cruciform column using universal beam section. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Md. Tahir, Mahmood and Juki, Irwan and Ishak, Mohd. Yunus and Mohammad, Shahrin and Z. Awang, Abdullah (2012) Application of component method on partial strength connections connected by thick plate between column flanges. In: Conference.

Md. Tahir, Mahmood and Mohamad, Sahrin and Osman, Mohd. Hanim and Ismail, Mohamad and Saad, Sarifuddin and Saim, A. Aziz and Ahmad, Yusof and Mohd. Yassin, Airil Yasreen (2010) Steelwork design guide to BS5950-1:2000. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0730–3

Md. Tahir, Mahmood and Mohammad, Shahrin and Yahaya, Nordin and Saad, Sarifuddin and Abd. Rahman, Ahmad Baharuddin (2006) Economic aspects of the use of partial and full strength joints on multi-storey unbraced steel frames. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Md. Tahir, Mahmood and Shek, Poi Ngian (2005) Performance of cruciform column using universal beam sections under axial compression load. Jurnal Teknologi B, 43 (B). pp. 51-66. ISSN 0127-9696

Md. Tahir, Mahmood and Shek, Poi Ngian and Tan, Cher Siang (2009) Push-off tests on pin-connected shear studs with composite steel-concrete beams. Construction and Building Materials, 23 (9). 3024 -3033. ISSN 0950-0618

Md. Tahir, Mahmood and Sulaiman, Arizu (2007) The economic comparison of multi-storey unbraced steel frames design in semi continuous construction. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Md. Tahir, Mahmood and Sulaiman, Arizu (2007) Experimental test on beam to column of partial strength composite connections using trapezoid web profiled steel sections. In: 1st Construction Industry Research Achievement International Conference (CIRAIC 2007), 2007, PWTC, KL.

Md. Tahir, Mahmood and Sulaiman, Arizu (2008) Standardisation of partial strength connections of extended end–plate connections for trapezoid web profiled steel sections. Malaysian Construction Research Journal, 2 (1). pp. 30-44. ISSN 1985-3807

Md. Tahir, Mahmood and Sulaiman, Arizu and Bakri, Ahmadon and Tan , Cher Siang and Shek, Poi Ngian and Wong, Kah Leong (2008) New concept of construction method for foundations system using cold-formed steel section. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Md. Tahir, Mahmood and Sulaiman, Arizu and Mohammad, Shahrin (2007) Standardisation of partial strength connection between extended and flush end-plate connections with trapezoid web profilled steel sections. In: 1st Construction Industry Research Achievement International Conference (CIRAIC 2007), 2007, PWTC, Kuala Lumpur.

Md. Tahir, Mahmood and Sulaiman, Arizu and Tan, Cher Siang and Shek, Poi Ngian (2007) Economic aspects of partial strength connection in the design of braced steel frame using trapezoidal web profiled steel sections. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Md. Tahir, Mahmood and Tan, Cher Siang and Shek, Poi Ngian (2006) Typical tests on cold-formed steel structures. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Md. Tahir, Mahmood and Hussein, Mohd. Azman and Sulaiman, Arizu and Mohamed, Shahrin (2009) Comparison of component method with experimental tests for flush end-plate connections using hot-rolled Perwaja Steel Sections. International Journal of Steel Structures, 9 (2). pp. 161-174. ISSN 1598-2351

Md. Yatim, Mohd. Yazmil (2008) Finite element investigation of strength of semi - rigid steel joints. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Yusof, Aminah (2007) What actually buyers paid for a house in Malaysia: an analysis of price variation. In: 6th Hawaii International Conference On Social Sciences 2007, 2007, Waikiki Beach Marriott Resort & Spa, Honolulu Hawaii.

Md. Yusof, Aminah and Salami, Bahman (2012) Build Operate and Transfer (BOT) in power plant projects in Iran. In: Conference.

Md. Yusof, Puteri Juieta Salwanni (2010) Investigation on crack problems of precast box culverts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Yusoff, Nelidya and Mohd. Sharif, Nurhanis and Sulaiman, Abdul Hadi and Mahdi, Mohd. Adzir (2015) Investigation on the signal performances of pre-, post- and inline compensation of l-band dispersion compensator using Chirped Fiber Bragg grating. In: 1st International Conference on Telematics and Future Generation Networks, TAFGEN 2015, 26-28 May, 2015, Kuala Lumpur, Malaysia.

Md. Yusoff, Nur Izzi and Ginoux, Marc-Stephane and Airey, Gordon Dan and Hainin, Mohd. Rosli (2010) Modelling the linear viscoelastic rheological properties of base bitumens. Malaysian Journal of Civil Engineering, 22 (1). pp. 22-37. ISSN 1823-7843

Md. Zahri, Azura (2015) Flood mapping using geographic information system (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Megat Jaafar, Megat Zahari (2009) Semi top down bottom up construction work in deep basement of tall building in Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mehrabi, Nima (2012) Effect of human motion induced vibration loading on footbridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mehrdad Ghaemi, Seyed (2012) Determine the impact of road humps on travel time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Melling, Lulie and Katimon, Ayob and Goh, Kah Joo and Hatano, Ryusuke (2007) Hydraulic conductivity and moisture characteristics of tropical peatland-preliminary investigation. In: Proceedings of Soils Science Conference of Malaysia 2007, 2007, Sarawak.

Memon, Noor Ahmed and Radin Sumadi, Salihuddin and Ramli, Mahyuddin (2006) Strength and behaviour of lightweight ferrocement-aerated concrete sandwich blocks. Malaysian Journal of Civil Engineering, 18 (2). pp. 99-108. ISSN 1823-7843

Memon, Amjad Hussain (1999) The use of pulverized fuel ash, ground granulated blast furnace slag and silica fume in high performance concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Memon, Noor Ahmed (2007) Charateristics of ferrocement encased aerated concrete sandwich wall elements. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Memon, Noor Ahmed and Sumadi, Salihuddin Radin and Ramli, Mahyuddin (2007) Ferrocement encased lightweight aerated concrete : a novel approach to produce sandwich composite. Materials Letters, 61 (19-20). pp. 4035-4038. ISSN 0167-577X

Memon, Noor Ahmed and Sumadi, Salihuddin Radin and Ramli, Mahyuddin (2007) Performance of high wokability slag-cement mortar for ferrocement. Building and Environment, 42 (7). pp. 2710-2717. ISSN 0360-1323

Memon, Ruhal Pervez (2016) Mechanical and thermal properties of sawdust concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Memon, Zubair Ahmed (2007) Automated construction project progress monitoring system. PhD thesis, Universiti Teknologi Malaysia.

Mesir, Baharin and Alel, Mohd. Nur Asmawisham and Mohd. Yunus, Mohd. Zulkifli and Ramli, Mohd. Zamri (2004) Perkembangan silibus teknologi maklumat didalam sistem akademik fakulti kejuruteraan awam, Universiti Teknologi Malaysia. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur .

Millard, S. G. and Al-Qadi, I. L. and Shaw, M. R. and Riad, S. M. and Shaari, A. and Bungey, J. H. (2001) Coaxial transmission lines: development test of procedures for concrete. Journal of Materials in Civil Engineering, 13 (3). pp. 202-208. ISSN 0899-1561

Millard, S. G. and Shaari, A. and Bungey, J. H. (2002) Field pattern characteristics of GPR antennas. NDT & E International, 35 (7). 473­-482. ISSN 0963-8695

Ming, Fai Chow and Yusop, Zulkifli (2014) Sizing first flush pollutant loading of stormwater runoff in tropical urban catchments. Environmental Earth Sciences, 72 (10). p. 4058. ISSN 1866-6280

Minhans, Anil (2010) Formulation of traffic management strategies in disasters. Institute of Town Planners, India Journal, 7 (2). pp. 85-97. ISSN 0537-9679

Minjal, Marwan Nafea and Mohd. Noor, Khairul Azwa and Abdul Rahim, Ruzairi and Mohd. Fadzil, Naizatul Shima and Rahiman, Mohd. Hafiz Fazatul and Abbas, Khairul Hamimah (2012) Collision avoidance using ultrasonic sensors. In: Process Tomography & Instrumentation -Series 9. Penerbit UTM, Skudai, Johor, pp. 15-28. ISBN 978-967-354-186-7

Mior Mohd. Tahir, Siti Nor Fariza and Md. Noor, Norhazilan and Yahaya, Nordin and Lim, Kar Sing (2015) Relationship between in-situ measurement of soil parameters and metal loss volume of X70 carbon steel coupon. Asian Journal of Scientific Research, 8 (2). pp. 205-211. ISSN 1992-1454

Mior Mohd. Tahir, Siti Nor Fariza and Yahaya, N. and Md. Noor, Norhazilan and Lim, Kar Sing and Abdul Rahman, Azlan (2015) Underground corrosion model of steel pipelines using in situ parameters of soil. Journal of Pressure Vessel Technology, Transactions of the ASME, 137 (5). ISSN 0094-9930

Mirasa, Abdul Karim and Hussein, Ahmad Fikri (2002) Steelwork design guide using locally produced steel sections second edition. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0247-8

Mirasa, Abdul Karim and Juki, Mohd. Irwan (1999) Kesan penggunaan RHA terhadap kekuatan dan kebolehtelapan gunite. Jurnal Kejuruteraan Awam, 11 (2). pp. 16-33. ISSN 0128-0147

Mirasa, Abdul Karim and Sapari, Noor Adli and Yusuf, Mohd. Zain and Nazir, Ramli (2001) Design guide for piles using locally produced steel H–section. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0222-2

Mirasa, Abdul Karim and Tapsir, Siti Hamisah and Hussein, Ahmad Fikri (2001) Design of structural steelwork for medium rise building. Penerbit UTM, Skudai, Johor Bahru. ISBN 983-52-0220-6

Miron, Nurfatin Aqeela (2015) Utilization of coconut shell as fine aggregate in asphaltic concrete AC14. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mirshekari, Mostafa (2013) Dynamic simulation of columns considering geometric nonlinearity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Miryousefi Ata, Seyedeh Sara (2013) Foreign workers in Middle East construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mirza, Jahangir and Abd. Khalid, Nur Hafizah and Hussin, Mohd. Warid and Ismail, Mohammad and Ismail, Mohamed A. and Md. Tahir, Mahmood and Mohamed, Azman and Ariffin, Farhayu (2015) Effectiveness of palm oil fuel ash as micro-filler in polymer concrete. In: 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Mirza, Jahangir and Durand, Benoit and Bhutta, Muhammad Aamer Rafique and Md. Tahir, Mahmood (2014) Preferred test methods to select suitable surface repair materials in severe climates. Construction and Building Materials, 50 . pp. 692-698. ISSN 0950-0618

Misbah, Nurfarahin (2013) Extent of roadway capacity shif resulting from midblock U-turn facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moazeni, Nima and Mohamad, Zurina and Dehbari, Nazila (2015) Study of silane treatment on poly-lactic acid( PLA) /sepiolite nanocomposite thin films. Journal of Applied Polymer Science, 132 (6). ISSN 0021-8995

Mofarrahi, Maryam (2013) Development of a dynamic simulation model for inventory level optimization through supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mofreh Gubran, Mohammed Mansoor (2014) Influence of flaky aggregate on stone mastic asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moghadasi, Mostafa (2013) Nonlinear behaviour of beam-to-column connection in reinforced concrete industrialised building system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moghimi, Vahid and Mohd. Jusan, Mahmud (2015) Priority of structural housing attribute preferences: identifying customer perception. International Journal of Housing Markets and Analysis, 8 (1). pp. 36-52. ISSN 1753-8270

Mohamad, A. and Roslan, Muhammad Sufi and Saktioto, Toto and Ali, Jalil (2012) Electro-optic tuneable of direct current voltage in ring resonator. Advanced Materials Research, 403-40 . pp. 4174-4178. ISSN 1022-6680

Mohamad, Ahmad Nasir (1990) Evaluation of cost-plus contract at Universiti Teknologi Malaysia, Skudai, Johore. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, E. Tonnizam and Armaghani, D. Jahed and Momeni, E. and Yazdavar, A. H. and Ebrahimi, M. (2016) Rock strength estimation: a PSO-based BP approach. Neural Computing and Applications . pp. 1-12. ISSN 0941-0643 (In Press)

Mohamad, Edy Tonnizam and Faradonbeh, Roohollah Shirani and Armaghani, Danial Jahed and Monjezi, Masoud and Majid, Muhd. Zaimi Abd. (2016) An optimized ANN model based on genetic algorithm for predicting ripping production. Neural Computing and Applications . pp. 1-14. ISSN 0941-0643 (In Press)

Mohamad, Edy Tonnizam and Gofar, Nurly and Mohd. Amin, Mohd. For and Mohd. Isa, Mohamed Fauzi (2011) Field assessment of rock strength by impact load test. Malaysian Journal of Civil Engineering, 23 (1). pp. 105-110. ISSN 1823-7843

Mohamad, Edy Tonnizam and Kassim, Khairul Anuar (2007) Use of the Schmidt hammer for testing weak rock. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Mohamad, Edy Tonnizam and Kassim, Khairul Anuar and Komoo, Ibrahim (2005) An overview of existing rock excavatability assessment techniques. Jurnal Kejuruteraan Awam, 17 (2). pp. 46-59. ISSN 0128-0147

Mohamad, Edy Tonnizam and Komoo, Ibrahim and Kassim, Khairul Anuar and Gofar, Nurly (2008) Influence of moisture content on the strength of weathered sandstone. Malaysian Journal of Civil Engineering, 20 (1). pp. 137-144. ISSN 1823-7843

Mohamad, Edy Tonnizam and Komoo, Ibrahim and Kassim, Khairul Anuar and Md. Noor, Muhazian (2010) Effectual excavation of weathered rocks using geological features. In: Quarries and Quarrying - Sustainable Development, Green Technology and Best Practices. Institute of Quarrying Malaysia, Selangor Malaysia, pp. 124-134. ISBN 978-967-10029-0-2

Mohamad, Edy Tonnizam and Latifi, Nima and Arefnia, Ali and Md. Isa, Mohamed Fauzi (2016) Effects of moisture content on the strength of tropically weathered granite from Malaysia. Bulletin of Engineering Geology and the Environment, 75 (1). pp. 369-390. ISSN 1435-9529

Mohamad, Edy Tonnizam and M. Noor, M. and Saad, R. (2010) Potential effects of quarry operations on workforce safety. In: Quarries and Quarrying - Sustainable Development, Green Technology and Best Practices, Institute of Quarrying Malaysia. Institute of Quarrying Malaysia, Selangor Malaysia, pp. 312-336. ISBN 978-967-10029-0-2

Mohamad, Edy Tonnizam and Murlidhar, Bhatawdekar Ramesh and Armaghani, Danial Jahed and Saad, Rosli and Yi, Chang Shiang (2016) Effect of geological structure and blasting practice in fly rock accident at Johor, Malaysia. Jurnal Teknologi, 78 (8-6). pp. 15-21. ISSN 0127-9696

Mohamad, Edy Tonnizam and Saad, Rosli and Hamzah, Nor Nazrin and Mohd. Akip Tan, Siti Norsalkini and Liang, Maybelle (2012) Assessment on abrasiveness of rock material on the wear and tear of drilling tool. Electronic Journal of Geotechnical Engineering, 17 A . pp. 91-100. ISSN 1089-3032

Mohamad, Hisham (2012) Temperature and strain sensing techniques using brillouin optical time domain reflectometry. In: Smart Sensor Phenomena, Technology, Networks, and Systems Integration 2012. SPIE, Bellingham, USA, pp. 1-13. ISBN 978-081949003-2

Mohamad, Hisham and Bun, Pin Tee (2015) Instrumented pile load testing with distributed optical fibre strain sensor. Jurnal Teknologi, 77 (1). pp. 1-7. ISSN 2180-3722

Mohamad, Izni Izzati (2015) Landfill site suitability using geographic information system and analytical hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Izni Izzati and Mohd. Yunus, Mohd. Zulkifli and Ahmad, Fatimah Shafinaz (2016) Landfill site selection by integrating analytical hierarchy process and geographic information system. Malaysian Journal Of Civil Engineering - MJCE, 28 (SINO.3). pp. 180-191. ISSN 1823-7843

Mohamad, Khairul Anuar (2010) An evaluation of statistical model for downscaling precipitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, M. I. and Nekooie, M. A. and Ismail, Z. B. and Taherkhani, R. (2013) Amphibious urbanization as a sustainable flood mitigation strategy in South-East Asia. In: Advanced Materials Research.

Mohamad, Madzura (2010) Kajian perbandingan kualiti efluen domestik antara sistem rawatan hi-kleen dan sistem IMHOFF. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Mazizah Ezdiani (2010) Tensile strength and behaviour of grouted splices integrated with flexible aluminium duct. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Mazizah Ezdiani and Ibrahim, Izni Syahrizal (2015) Interface shear strength of concrete-to concrete bond with and without projecting steel reinforcement. Jurnal Teknologi, 75 (1). pp. 169-172. ISSN 2180-3722

Mohamad, Mazizah Ezdiani and Ibrahim, Izni Syahrizal and Abdullah, Redzuan (2015) Finite element modelling of interface shear strength at concrete-to-concrete bond. In: 9th Asia Pacific Structural Engineering and Construction Conference (APSEC) & 8th Asean Civil Engineering Conference (ACEC), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mohamad, Mazmira E. and Ibrahim, Izni Syahrizal and Abdullah, Redzuan and Abd. Rahman, Ahmad Baharuddin and Kueh, Ahmad and Usman, Jamilu (2015) Friction and cohesion coefficients of composite concrete-to-concrete bond. Cement and Concrete Composites, 56 . pp. 1-4. ISSN 0958-9465

Mohamad, Mohamad Ibrahim (2012) Amphibious urbanization as a sustainable flood mitigation strategy in south-east asia. In: Conference.

Mohamad, Mohamad Ibrahim and Madon, Zulkifli (2006) Understanding contract documentation. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamad, Mohamad Ibrahim and Madon, Zulkifli and Zin, Rosli and Mansur, Shaiful Amri (2008) Clarity and improving level of understanding of contract documentation. Malaysian Journal of Civil Engineering, 20 (1). pp. 128-136. ISSN 1823-7843

Mohamad, Mohamad Ibrahim and Nekooie, Mohammad Ali and Mahdinezhad, Mahyar and Hosseini, Payam and Taherkhani, Roohollah and Saleh, Abd. Latif (2012) Selecting of cementing material in green lightweight concrete with Oil Palm Shell (OPS). Research Journal of Applied Sciences, Engineering and Technology, 4 (12). pp. 1729-1739. ISSN 2040-7459

Mohamad, Mohamad Ibrahim and Yahya, Khairulzan (2008) Applying CE to construction. In: Issues In Construction Industry. Penerbit UTM , Johor, pp. 1-16. ISBN 978-983-52-0568-2

Mohamad, Mohamad Ibrahim and Zawawi, Mardhiah and Nekooie, M. A. (2009) Implementing industrialised building system (IBS) in Malaysia: acceptance and awareness level, problems and strategies. Malaysian Journal of Civil Engineering, 21 (2). pp. 219-234. ISSN 1823-7843

Mohamad, Mohd Saberi and Omatu, Sigeru and Deris, Safaai and Mohd Hashim, Siti Zaiton (2007) A model for gene selection and classification of gene expression data. Artificial Life and Robotics, 11 (2). pp. 219-222. ISSN 1614-7456

Mohamad, N. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Choi, S. B. and Nordin, M. F. M. (2016) The Field-Dependent Rheological Properties of Magnetorheological Grease Based on Carbonyl-Iron-Particles. Smart Materials and Structures, 25 (9). ISSN 0964-1726

Mohamad, Noor Asiah (2010) River mouth stability of Sungai Papar, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Noridah and Wan, Inn Goh and Abdullah, Redzuan and Ahmad, Ismail and Samsuddin, S. and Abd. Rahman, Mohd. Hadi (2013) Ultimate load carrying capacity of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with double shear truss connectors under axial and eccentric loading. In: International Civil and Infrastructure Engineering Conference 2013, 2013.

Mohamad, Siti Suhaila (2014) Potential reuse of recovered nonmetallic printed circuit board waste as sand replacement in construction materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Syahrul Hisham and Abd. Rahman, Mohd. Shaiful and Ibrahim, Sallehuddin and Mohd. Yunus, Mohd. Amri (2012) A review of sensors for agro-environmental monitoring. In: Process Tomography & Instrumentation -Series 10. Penerbit UTM, Skudai, Johor, pp. 91-97. ISBN 978-967-354-189-8

Mohamad Diah, Abu Bakar and Hamir, Rosli and Kamarulzaman, Kamarul Badlishah and Mohd. Ridzuan, Ahmad Ruslan (2000) Kesan pengawetan stim terhadap kekuatan konkrit. Jurnal Kejuruteraan Awam, 12 (2). pp. 63-70. ISSN 0128-0147

Mohamad Noor, Siti Baizura (2009) Provisional liquidated damages (PLD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Sabri, Mohd. Fahmi (2010) Performance of asphaltic concrete using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Yatim, Jamaludin and Wan Abdul Rahman, Wan Aizan and Mohd. Sam, Abdul Rahman (2009) Characterisation and effects of the Effective Micro-organics (EM) and Industrial Waste (IW) materials as a partial mixture in concrete. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Mohamad Yatim, Yahya (1999) Bahaya kebakaran dan tindakan pencegahan kebakaran pada bangunan tinggi. Jurnal alam bina, 2 (1). pp. 33-40. ISSN 1511-1369

Mohamad Yatim, Jamaludin (1993) Kajian mengenai pelembutan konkrit : teori dan ujikaji. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Yatim, Jamaludin and Ho, Shu Feng and Tapsir, Siti Hamisah (2008) Effect of fibre orientations on single-lap bolted joint of pultruded GFRP plates under tensile loading. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 85-99. ISBN 978-983-52-0569-9

Mohamad Yatim, Jamaludin and Mohamed, Zainai and Tapsir, Siti Hamisah (2008) Behaviour of pultuded GFRP composites under tensile and compressive loading. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 40-57. ISBN 978-983-52-0569-9

Mohamad Yatim, Jamaludin and Mohamed, Zainai and Tapsir, Siti Hamisah (2008) Environmental effects on mechanical properties of GFRP Composites : an overview. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 100-124. ISBN 978-983-52-0569-9

Mohamad Yatim, Jamaludin and Tapsir, Siti Hamisah and Mohamed, Zainai (2006) Effects of tropical weather on the compression properties of pultruded gfrp composites. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamad Yusoff, Izham and Abdul Rahman, Alias and Katimon, Ayob (2007) GIS Based hydrologic modelling for infiltration excess overland flow. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Mohamad Zin, Rosli and Abd. Majid, Muhd Zaimi and Che Wan Putra, Che Wan Fadhil and Mohammed, Abdul Hakim (2004) Neural Network Model For Design Constructability Assessment. Jurnal Teknologi B (40B). pp. 27-40. ISSN 0127-9696

Mohamad Zin, Rosli and Tan, Caren Cai Loon (2008) A neural model for predicting the time performance of traditional general contract (TGC) project. Malaysian Journal of Civil Engineering, 20 (1). pp. 26-37. ISSN 1823-7843

Mohamad Zin, Rosli (2008) Construcability in construction. In: Issues in Construction Industry. Penerbit UTM , Johor, pp. 17-34. ISBN 978-983-52-0568-2

Mohamad Zin, Rosli (2007) Construction contract clarity: Conceptual process flow modeling. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007.

Mohamad Zin, Rosli (2011) Incremental rapid visual screening method for seismic vulnerability assessment of existing buildings. In: International Conference On Earthquake Engineering And Disaster Mitigation Ii 2011.

Mohamad Zin, Rosli and Che Ali, Mukhtar (2007) Development of quality cost matrix in quality management system for construction project. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Johor.

Mohamad Zin, Rosli and Mansur, S. A. and Bakri, A. and Tan, Caren Cai Loon (2006) Predicting the performance of traditional general contract projects: A neural network based approach. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohamad Zin, Rosli and M., Yadollahi (2011) Development of analytical hierarchy process (AHP) method for rehabilition project ranking before disaster. In: 2nd International Conference On Disaster Management And Human (Disaster Mangement 2011).

Mohamad Zin, Rosli and Mohammadreza, Vafaei and Mohammadreza, Yadollahi (2011) A model for seismic vulnerability score assignment of road infrastructure using linear regression technique. In: 2011 International Conference On Civil Engineering And Building Materials (CEBM 2011).

Mohamad Zulkifli, Siti Nur Awanis and Abdul Rahman, Alias (2007) Managing 3D spatial objects using geoDBMS and microstation bentley map. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Mohamed, Rosdi and Zakaria, Fadhadli and Gofar, Nurly (2008) Performance of ground improvement by precompression and vertical drain. Geotechnical & Highway Engineering .

Mohamed, A. Hamid (1994) An overview of ARC/INFO a tool box approached GIS. Jurnal Kejuruteraan Awam, 7 (2). pp. 19-36. ISSN 0128-0147

Mohamed, Ab. Hamid (2000) Asas ukur kejuruteraan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0199–4

Mohamed, Abdallatef A. M. (2013) Development of geodetic deformation analysis software based on iterative weighted similarity transformation technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed, Azhari (2003) An investigation or the vertical control network of Peninsular Malaysia using a combination of levelling, gravity, GPS and tidal data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed, Azman and A.Khalid, Nur Hafizah and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Jaya, Ramadhansyah Putra and Mohd. Sam, Abdul Rahman and Ismail, Che Ros (2016) Determination of groove and mechanical properties of underside shaped concrete paver. Jurnal Teknologi, 78 (4). pp. 79-83. ISSN 0127-9696

Mohamed, Elfadil A/Alla (2001) Computer-based data collection and analysis techniques for maintenance modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamed, Gamal Maged (2015) Behavior of self-compacting concrete incorporating recycle materials at high temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Mohhar (2000) Sifat-sifat kejuruteraan grut terhadap struktur rasuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Nur Syahida (2013) Finite difference method and finite volume method for solving navier-stokes equation in sea water movement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed, Yusuf Abdinasir (2010) Slenderness study of composite slabs modeled by explicit dynamic procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Zalina (2010) Design verification on bored pile within Kenny Hill formation via static load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Zaulkafli (1998) Penyenggaraan peralatan ukur di Jabatan Kejuruteraan Awam Politeknik Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamed, Khalid Ahmed (2010) Sustainable development factors for land development in UTM Johor Bahru campus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Ali, Nasly and Abu Azam, Haniisah (2010) Structured programming: using C++ in simple steps with engineering applications. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0754–9

Mohamed Ali, Nasly (Penterjemah) and Ahmad, Yusof (Penterjemah) and Mohammad, Shahrin (Penterjemah) and Md. Nurdin, Dinar (Penterjemah) (1999) Analisis struktur edisi ketiga. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0160–9

Mohamed Ali, Nasly (Penterjemah) and Abd. Samat, Roslida (Penterjemah) and Saleh, Abd. Latif (Penterjemah) and Ahmad, Yusof (Penterjemah) and Abd. Hamid, Hazlan (Penterjemah) (1996) Dinamik struktur: teori dan pengiraan edisi ketiga. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0062–9

Mohamed Ali, Nasly (Penterjemah) and Abdullah, Redzuan (Penterjemah) and Mansur, Shaiful Amri (Penterjemah) (1997) Dinamik struktur: suatu pengenalan kepada kaedah berkomputer. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0077–7

Mohamed Bazin, Maisarah and Abubakar, Mu'Azu and Ahmad, Norhayati (2015) A comparative study of porous support from Sayong and Kankara clay. In: 3rd International Conference on Water Resources (ICWR 2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Mohamed Hirei, Hassan (2012) Development of inproved wireless client authentication mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Ibrahim, Nor Iza Iffazun (2009) Comparative analysis of optimised static and multi-timed fixed traffic signal timings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Isa, Mohd. Fairuz (2000) Model studies on the effect of deep excavation on pore water pressure and settlement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Murid, Ali Hassan and Abdullah, Mohd. Shahril Nizam and Sabari, Nor Liyana (2015) Performance study of reduced graphene oxide speek for direct methanol application. In: 9th South East Asian Technical University Consortium (SEATUC) Symposium, 26-31 Jul, 2015, Thailand.

Mohamed Najib, Mohamed Zuhaili (2009) Development of biogranules and their application in treating synthetic textile wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Najib, Mohamed Zuhaili and Salmiati, Salmiati and Ujang, Zaini and Salim, Mohd. Razman (2015) Formation and characteristics of microbial granules containing photosynthetic bacteria using palm oil mill effluent (POME). In: The 2nd IWA Malaysia Young Water Professionals Conference 2015, 17-20 Mac, 2015, Kuala Lumpur, Malaysia.

Mohamed Najib, Mohamed Zuhaili and Salmiati, Salmiati and Ujang, Zaini and Salim, Mohd. Razman (2014) Photosynthetic microbial granules developed from palm oil mill effluent (POME). In: The Seventh Annual Conference on the Challanges in Environmental Science and Engineering (CESE2014), 12-16 Oct, 2014, Johor Bahru, Malaysia.

Mohamed Nazri, Fadzli and Putra Jaya, Ramadhansyah and Abu Bakar, Badorul Hisham and Ahmadi, Raudhah (2017) Fire resistance of ultra-high performance fibre reinforced concrete due to heating and cooling. In: The 9th International Unimas Stem Engineering Conference (ENCON 2016) “Innovative Solutions for Engineering and Technology Challenges, 2016.

Mohamed Omer, Joma Hamed (2013) Analytical and numerical modeling of flush end-plate connection system with built-up hybrid beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Ramlee, Mohd. Fazril (2015) Enhancement of quality of working life among site officers at Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Saad, Mohamad Zaidi (2007) The effect to the termination of letter of intent in construction contract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Saaid, Muhammad Faiz and Ibrahim, Ismail and Sudin, Shahdan and Mohamad, Mohd. Saberi and Md. Yusof, Zulkifli and Ahmed Mukred, Jameel Abdulla and Khalil, Kamal and Ibrahim, Zuwairie and Watada, Junzo (2012) Automation of DNA computing readout method based on real-time PCR implemented on DNA engine opticon 2 system. International Journal of Innovative Computing, Information and Control, 8 (3 A). pp. 1907-1916. ISSN 1349-4198

Mohamed Salim, Ferwati and Shafaghat, Arezou (2015) Pragmatic probe: preference and satisfaction with built environment. Jurnal Teknologi, 74 (4). pp. 125-134. ISSN 0127-9696

Mohamed Touhid, Roslina (2004) Kajian kesan selisih ionosfera terhadap garis dasar dari rangkaian GPS tetap Malaysia (MASS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed Yusof, Zainab and Abd. Rahman, Norhan (2003) Numerical model of the migration of toluene in porous media. Jurnal Kejuruteraan Awam, 15 (1). pp. 34-48. ISSN 0128-0147

Mohamed Yusof, Nurfadzlin (2011) Moisture susceptibility of Malaysian hot mix asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Zainudi, Mohamad Shukri and Abas, Kharul Hamimah (2012) Rat trap using ultrasonic sensor - prototype. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Penerbit UTM, Skudai, Johor, pp. 47-65. ISBN 978-967-354-188-1

Mohamed Zainudi, Mohd. Shukri and Saleh, Siti Syahirah and Mohd. Nor, Azri Asyraf and Abas, Khairul Hamimah (2012) Rat trap using ultrasonic sensor. In: Process Tomography & Instrumentation -Series 10. Taylor & Francis Group, pp. 166-186. ISBN 978-1-4398-5488-4

Mohamed, Sarajul Fikri (2002) Artificial intelligence (AI) support for knowledge management in construction. Masters thesis, Loughborough University, Department of Civil and Building Engineering.

Mohammad, Edy Tonizam and Kassim, Khairul Anuar and Mohd. Amin, Mohd. For (2007) To rip or to blast in rock excavation. In: Proceedings of the 16th South East Asian Geotechnical Conference, 2007, Sheraton, Subang Jaya, Malaysia.

Mohammad, Hairuddin (2009) Quality and satisfaction of house owners for industrialised building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad, Nor Nisa Balqis and Arsad, Agus and Rahmat, Abdul Razak and Mat Desa, Mohd. Shaiful Zaidi and Abdullah Sani, Nur Syazana (2015) Effect of carbon nanotube on the mechanical properties of compatibilized polylactic acid/natural rubber blend. In: World Virtual Conference on Advanced Research in Materials and Engineering Applications, 2015.

Mohammad, Shahrin (2013) Quick installation composite slab system for pre-fabricated structures. In: Proceedings on sustainable built environment, March,2013, 2013, Hanoi.

Mohammad, Shahrin and Md. Nor, Hasanan and Omar, Wahid and Mohamed, Danial (2004) Enhancing teaching and learning through the incorporation of generic skills for civil engineering undergraduates. In: Conference On Engineering Education (CEE 2004), 14 - 15 December 2004, Kuala Lumpur.

Mohammad, Shahrin and Puteh, Marlia and Wan Adnan, Wan Nur Asyura and Abdul Malek, Norazmah Suhailah (2015) A tool to measure engineering students' design strategies and abilities. In: I-Phex 2015, 6 Aug, 2015, Kuala Lumpur, Malaysia.

Mohammad, Shahrul Nizam and Zakaria, Rozana and Omar, Wahid and Abd. Majid, Muhd. Zaimi and Saleh, Abd. Latif and Mustaffar, Mushairry and Mohamad Zin, Rosli and Jainudin, Noor Azland (2014) Potential of solar farm development at UTM campus for generating green energy. APPLIED SCIENCE AND PRECISION ENGINEERING INNOVATION, PTS 1 AND 2, 479-48 . pp. 553-558. ISSN 1660-9336

Mohammad, Shahrul Nizam (2013) Potential of solar farm development at UTM campus for generating green energy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad, Soheilmoghaddam (2013) Regenerated cellulose/halloysite nanotube nanocomposite films prepared with an ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammad, T. A. and Mohd Noor, M. J. M. and Ghazali, A. H. (2016) Assessment of using synthetic polymers in dewatering of sewage sludge. Desalination and Water Treatment, 57 (48-49). pp. 23308-23317. ISSN 1944-3994

Mohammad, Z. and Othman, N. A. and Abu Bakar, N. and Hara, H. and Zakaria, Z. and Sugiura, N. (2016) Innovation in agricultural support on sustainability for fresh fruit bunch (FFB) of elais guineesis in Malaysia using artificial domestic pollination system (ADOPSY™). Jurnal Teknologi, 78 (8). pp. 125-132. ISSN 0127-9696

Mohammad Hussain, Wail Asim and Osman, Mohd. Hanim and Saleh, A. Latif and Ibrahim, Izni Shahrizal (2014) The application of drillability properties in measuring the strength of hardened concrete. International Journal of Applied Engineering Research, 9 (11). pp. 1765-1786. ISSN 0973-9769

Mohammad Ismail, Mohammad Ismail and S. Sergi, George (2008) Electrochemical chloride extraction treatment on chloride contaminated concrete. In: Corrosion of Steel in Concrete. Penerbit UTM , Johor, pp. 128-153.

Mohammad Joshani, Mohammad Joshani (2010) Nonlinear finite element analysis of steel-concrete composite slabs using explicit dynamics procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Sulanah, Nina Imelda (2004) The effect of opening on the strength of corrugated web plate girder subjected to shear. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Zaki, Mohd. Faiz (2012) Effect of soil nail on slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad, Mohammad Ibrahim and Abdullah, Arham (2005) Determining the basic principles in managing project schedule for construction. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohammadhosseini, H. and Abdul Awal, A. S. M. and Sam, A. R. M. (2016) Mechanical and thermal properties of prepacked aggregate concrete incorporating palm oil fuel ash. Sadhana - Academy Proceedings in Engineering Sciences, 41 (10). pp. 1235-1244. ISSN 0256-2499

Mohammadhosseini, Hossein (2014) Physical and mechanical properties of concrete containing fibers from industrial carpet waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammadhosseini, Hossein and A. S. M., Abdul Awal and Mohamad Yatim, Jamaludin (2017) The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres. Construction and Building Materials, 143 . pp. 147-157. ISSN 0950-0618

Mohammadhosseini, Hossein and Abdul Awal, A. S. M. and Ab. Kadir, Mariyana Aida (2015) Influence of polypropylene waste carpet fiber on deformation characteristics of concrete. In: 2nd International Conference on Advanced Materials, Structures and Mechanical Engineering (ICAMSME 2015), 29-31 May, 2015, Korea.

Mohammadhosseini, Hossein and Abdul Awal, A. S. M. and Vahedi, Abdulhamid (2015) Influence of palm oil fuel ash on physico-mechanical properties of prepacked aggregate concrete. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th ASEAN Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mohammadhosseini, Hossein and Mohamad Yatim, Jamaludin and Mohd. Sam, Abdul Rahman and A. S. M., Abdul Awal (2017) Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash. Journal of Cleaner Production, 144 . pp. 448-458. ISSN 0959-6526

Mohammadi, Farahbod (2009) Building maintenance in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammadi Bazargan, Hossein (2014) Analysis of concrete-corrugated-steel slab based on modified transformed section method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Bashar Hassen (2014) Post-tensioned infills effect on lateral resistance of industrialized building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Nurul Izma (2009) Development of air quality profile by using gaussian plume dispersion model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Abali, Aliyu (2013) Framework for incident response process in Nigerian Postal Service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohammed Abdullahi, Muazu and Ali, Nazri and Ahmed, Kamarudin (2010) Elapse time factor on induced vegetative moisture uptake in an unsaturated soil. American Journal of Engineering and Applied Sciences, 3 (4). pp. 597-603. ISSN 1941-7020 (Print); 1941-7039 (Electronic)

Mohammed Ahmed, Omar Babiker Elhaj (2010) Comparison of continuous dynamics probing with the standard penetration test for highly weathered limestone of eastern Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Al-Bared, Mohammed Ali and Abdullah, Rini Asnida and Mohd. Yunus, Nor Zurairahetty and Mohd. Amin, Mohd. For and Awang, Haryati (2015) Rock slope assessment using kinematic and numerical analyses. Jurnal Teknologi, 77 (11). pp. 59-66. ISSN 0127-9696

Mohammed Ali, Almuashi (2013) Recognition of partially occluded objects in 2D images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohammed Ali, Nasly and Bell, Brian J. (1991) Teori struktur lanjutan. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–28–2

Mohammed Ashmila, Fathi (2009) Compression characteristics stabilized cohesive soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Mohammed, Basheer Abdul Wareth (2009) Simulation of tasks in bridge construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Salah, Faisal Mohammed (2016) Performance of asphaltic concrete incorporating SBR subjected to aging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Salih, Haval (2015) Residential housing development in Kurdistan region government of Iraqi federal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd , Mohd Ibrahim Seeni and Hashim, Mazlan (1997) Undergraduate and Postgraduate Programmes in Remote Sensing at Universiti Teknologi Malaysia. Buletin Geoinformasi, 1 (3). pp. 148-152. ISSN 1394-7702

Mohd Badroldin, Mohd Khairul Anas and Abdul Hamid, Abdul Rahim and Abdul Raman, Syazwani and Zakaria, Rozana and Saeed, Reza Mohandes (2016) Late payment practices in the malaysian construction industry. Malaysian Journal Of Civil Engineering (MJCE), 28 (3). pp. 149-162. ISSN 1823-7843

Mohd Hashim, Mohd. H. and Mohd Sam, Abdul R. and Hussin, Mohd W. (2016) Experimental investigation on the effect of natural tropical weather on interfacial bonding performance of CFRP-concrete bonding system. Journal of Engineering Science and Technology, 11 (4). pp. 584-604. ISSN 1823-4690

Mohd Noor, R. and Ahmad, S. W. and Adnan, A. and Nazir, R. (2016) Attenuation function relationship of subduction mechanism and far field earthquake. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2597-2601.

Mohd Yassin, Airil Y. and Nethercot, David A. (2007) Cross-sectional properties of complex composite beams. Engineering Structures, 29 (2). pp. 195-212.

Mohd Yunus, Mohd Zulkilli (1999) The technology of gis for civil engineering profession. Jurnal Kejuruteraan Awam, 11 (1). pp. 96-107. ISSN 0128-0147

Mohd Yusof, Aminah and Mahat, M. N. and Omar, N. and Wood, A. K. H. (2001) Water quality studies in an aquatic environment of disused tin-mining pools and in drinking water. Ecological engineering, 16 (3). pp. 405-414.

Mohd Zain , Muhammad Fauzi and Islam, Md Nazrul and Salihudin, Radin Sumadi and Yap, S. G. (2004) Cement-based solidification for the safe disposal of blasted. Cement and Concrete Composites , 26 (7). pp. 845-851. ISSN 09589465

Mohd. Addi, Mitra and Muhammad Razif, Muhammad Rusydi and Che Harun, Fauzan Khairi (2015) Development of a graphical user interface using labview as a medical imaging learning tool. In: Innovative Practices in Higher Education Expo 2015, 6 Aug, 2015, Johor Bahru, Johor.

Mohd. Affendi, I. and Rozana, Z. and Sani, B. A. and Foo, K. S. and Ain Naadia, M. and Yazlin Salfiza, Y. and Rosli, M. Z. and Mushairry, M. and Hasrul Haidar, I. and Norhaliza, H. and Nurfatimah, M. and Muhd. Zaimi, A. M. (2013) Fundamental elements of Malaysia green highway. In: Applied Mechanics And Materials.

Mohd. Ali, Hishamuddin and Lee, Janice Yim Mei (2007) Property as an investment. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mohd. Ali, Mohd. Hafiz (2015) Study on the influence of head of project team role throughout JKR project life cycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ali, Muhammad Khairool Fahmy and Yahaya, Nordin and Abu Bakar, Akrima and Ismail, Mardhiah and Zardasti, Libriati and Md. Noor, Norhazilan (2016) Corrosion of x-70 carbon steel pipeline subject to sulfate reducing bacteria. ARPN Journal of Engineering and Applied Sciences, 11 (21). pp. 12643-12652. ISSN 1819-6608

Mohd. Ali, Muhammad Khairool Fahmy and Yahaya, Nordin and Abu Bakar, Akrima and Ismail, Mardhiah and Zardasti, Libriati and Md. Noor, Norhazilan (2016) Corrosion of x-70 carbon steel pipeline subject to sulfate reducing bacteria. ARPN Journal of Engineering and Applied Sciences, 11 (21). pp. 12643-12652. ISSN 1819-6608

Mohd. Amin, Mohd. For and Chua, Jerry Kuo Sheng and Ismail, Fauzilah and Mohamad, Edy Tonnizam (2005) Classification and rippability of duricrusts. Jurnal Kejuruteraan Awam, 17 (2). pp. 18-29. ISSN 0128-0147

Mohd. Amin, Mohd. For and Mustaffar, Mushairry (2001) An approach to joint roughness measurement in Rock-A comparative study. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amin, Md. Khairi (1994) Engineering characteristics of quicklime treated slime from ex-mining road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Amin, Mohd. For (2007) Cemented sediments-method of excavation with regard to their properties. In: 1st Construction Industry Research Achievement International Conference (CIRAIC 2007), 2007, PWTC, Kuala Lumpur.

Mohd. Amin, Mohd. For and Chan, Sook Huei and Jamaluddin, Tajul Anwar (2007) Classification and properties of duricrusts for excavation purpose. Malaysian Journal of Civil Engineering, 19 (2). pp. 117-127. ISSN 1823-7843

Mohd. Amin, Mohd. For and Chan, Sook Huei and Md Rafik, Abdul Ghani (2009) Rippability classification for quartzite based on specific energy and field production rate. Malaysian Journal of Civil Engineering, 21 (1). pp. 42-54.

Mohd. Amin, Mohd. For and Kassim, Azman and Mohamad, Edy Tonnizam and Ong, Heng Yau (2003) Classification of filled joint based on the characteristics of its constitutive components. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amin, Mohd. For and Khoo, Kai Siang and Chai, Hui Chon (2004) Reinforcement mechanisms of rock bolt : a laboratory investigation. Jurnal Kejuruteraan Awam, 16 (1). pp. 1-12. ISSN 0128-0147

Mohd. Amin, Mohd. For and Mat Yusof, Nur‘Ain and Abdullah, Rini Asnida (2016) Empirical strength envelope for shale. Jurnal Teknologi, 78 (42554). pp. 129-137. ISSN 0127-9696

Mohd. Anuar, Norzana and Jaffar Sidek, Faridah (2010) The use of perforated pile beakwaters to attenuate waves. Malaysian Journal of Civil Engineering, 22 (1). pp. 152-170. ISSN 152-170

Mohd. Anuar, Norzana and Jaffar Sidek, Faridah (2012) Wave characteristics around perforated piles in a two rows arrangement. Malaysian Journal of Civil Engineering, 24 (1). pp. 48-66. ISSN 1823-7843

Mohd. Aziz, Hidayah and Masrom, Noor Idayu and Sulaiman, Nur Fatin and Amat Mustajab, Mohd. Khairul Asyraf and Yacob, Abdul Rahim (2012) Effect of hydration-dehydration activation on the basic strength of nano structured alkaline earth metal calcium oxide. Advanced Materials Research, 383-39 . pp. 3835-3839. ISSN 1022-6680

Mohd. Aziz, Mohd. Azwan Sayuti (2007) Effective management of coastal and maritime engineering projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Badroldin, Mohd. Khairul Anas (2015) Payment culture in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Daud, Nur Firdaus (2009) Overcoming pressure deficiency in Sungai Rengit water distribution system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Fadhil, Md. Din and Lee, Yeeyong and Mohanadoss, Ponraj and Ossen, Dilshan Remaz and Iwao, Kenzo and Chelliapan, Shreeshivadasan (2014) Thermal comfort of various building layouts with a proposed discomfort index range for tropical climate. Journal of Thermal Biology, 41 (1). pp. 6-15. ISSN 0306-4565

Mohd. Faizal Ali Akhbar, (2015) Enhancement of heat transfer coefficient in an automobile radiator by using nanocoolant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Faudzi, Ahmad Athif (2013) 3-D finite-element analysis of fiber-reinforced soft bending actuator for finger flexion. In: 2013 IEEE/ASME International Conference On Advanced Intelligent Mechatronics: Mechatronics For Human Wellbeing, AIM 2013.

Mohd. Fauzi, Nurihan (2015) Strength characterisation of shale using Mohr-Coulomb and Hoek-Brown criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ghazali, Mohd. Zulkifli and Hassan, Maslin and Mirasa, Abdul Karim (1991) Investigation techniques into the state of stress of reinforced concrete buildings. In: Seminar Kebangsaan Menilai Pencapaian Penyelidikan IRPA Dalam Rancangan Malaysia Ke-5 Sektor Perindustrian, 20-24 Dec. 1991, Universiti Utara Malaysia, Kedah Darul Aman.

Mohd. Ghazali, Mohd. Zulkifli (1995) Concept and issues in engineering education. In: ASAIHL 1995 National Conference Malaysia, 30 May 1995, Dewan Jumaah, UTM, Johor.

Mohd. Ghazali, Mohd. Zulkifli (1995) What industry can do to make engineering education relevant to their own operations? In: SEAMEO Colloquium on Engineering and Technology Education, 9-11 Jan. 1995, Jakarta, Indonesia.

Mohd. Ghazali, Mohd. Zulkifli and Kassim, Mohd. Azraai (1993) How to reduce wastes and save materials. In: Leadership seminar on environmental and urban management, 10th - 12th August 1993, UTM, Sekudai.

Mohd. Hafiz, Mohd. Hafizan (2009) Sewage sludge land application for the growth of edible plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hanif, Mohd. Ikhmil Faevwasz (2011) Problems and dilemmas of class F contractors' participation in large projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hanipiah, Mohd. Zulkifli (2009) Performance of full scale embankment on soft clay reinforced with high streght geotextile at the interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hashim, Mohd. Hisbany and Mohd.Sam, Abdul Rahman and Husin, Mohd.Warid and Abu Hassan, Shukur (2008) Performance of externally bonded reinforced concrete structures using carbon fibre reinforced polymer in tropical climate. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 73-84. ISBN 978-983-52-0569-9

Mohd. Hashim, Siti zaiton and Tokhi, Mohammad Osman (2004) ANFIS active vibration control of flexible beam structures. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis (ESDA2004). ASME, pp. 747-752. ISBN 0-7918-4173-1

Mohd. Idris, Nurmawaddah (2015) Professional personality profiling for purpose of project success in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ismail, Kamsiah (1988) Flexural and tensile behaviour of polypropylene-reinforced cement thin sheets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ismail, Kamsiah and Mohd. Nordin, Dinar (2003) Study of light weight concrete, behavior. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Mohd. Ismail, Kamsiah (Penterjemah) and Ahmad, Yusof (Penterjemah) and Arman, Zainab (Penterjemah) (1997) Analisis struktur pertengahan (UTM–Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0080–7

Mohd. Jaafar, Mohammad Nazri and Eldrainy, Yehia A. and Mat Ali, Muhammad Faiser and Wan Omar, W. Z. and Mohd. Hizam, Mohd. Faizi Arif (2012) Combustion performance evaluation of air staging of palm oil blends. Environmental Science & Technology, 46 (4). pp. 2445-2450. ISSN 0013-936X

Mohd. Jakarni, Fauzan and Md. Yusoff, Nur Izzi and Wu, Jiantao and Aziz, Md. Maniruzzaman (2015) Utilization of sewage sludge molten slag as aggregate substitute in asphalt mixtures. Jurnal Teknologi, 73 (4). pp. 105-110. ISSN 0127-9696

Mohd. Kamarol Bahari, Mohd. Aiman (2014) Peranan jurukur tanah dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Kamarol Bahari, Mohd. Aiman (2014) Peranan juruukur tanah dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Kassim, Amir Hashim and Fatt, Choi Lim (1995) Identification and selection of best fitting candidate distribution for rainfall frequency analysis in Cameron Highlands. Jurnal Kejuruteraan Awam, 8 (2). pp. 1-14. ISSN 0128-0147

Mohd. Muhayidin, Shahabuddin (2007) Finite element modelling and analysis of dry floor SLAB. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd. Hafiz Fazalul and Yunus, Yusry and Zakaria, Zulkarnay and Nor Ayob, Nor Muzakkir (2012) Development of parallel and fan-shaped beam mixed-projection optical tomography. Sensors And Transducers, 14 (5). pp. 36-44. ISSN 1726-5479

Mohd. Nasir, Kamarul Azlan (2010) Development soil parameters for hydrologic modelling in upper Sungai Muar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Fatimah and Jaffar Sidek, Faridah and Goh, Guit Keau (1991) Mekanik bendalir: untuk kejuruteraan awam. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–9585–20–7

Mohd. Noor, Fatimah (Penterjemah) (1994) Hidraulik kejuruteraan awam: teori, masalah dan penyelesaian. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0007–6

Mohd. Noor, Mohd. Al-Akhbar (2013) Meshfree formulation of free vibration of composite beam with partial interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Nasir (2010) Challenges in coordination process for tall building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Norziaty (2007) Correlations between compressibility characteristics and physical properties of cohesive soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nor, Nurafifah and Hadibarata, Tony and Yusop, Zulkifli and Lazim, Zainab Mat (2015) Removal of brilliant green and procionred dyes from aqueous solutionby adsorption using selected agricultural wastes. Jurnal Teknologi, 74 (11). pp. 117-122. ISSN 0127-9696

Mohd. Nor, Shadiah Husna (2011) Probabilistic-based corrosion modelling using inspection data of ballast and LPG stell tanks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Odli, Zaity Syazwani (2009) Application of geographic information system (GIS) in air quality monitoring of a road construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Pauzi, Nurul Noraziemah (2015) Measurement of building energy intensity towards potential of building retrofit for M50, Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Radzuan, Nor Amin (2008) The challenges in international construction project with regard to safety compliance and cross cultural management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ridzuan, Ahmad Ruslan (1994) Finite element modelling of reinforced concrete beam using COSMOS/M. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Saat, Sa’adiah and Setan, Halim and Matori, Abd. Nasir (2005) Sinkhole risk modeling in residential area using GIS technique. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Mohd. Said, Kamilah (2015) Occupational noise exposure amongst road construction workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Said, Mohd. Ismid and Abdul Razak, Abdul Syukur and Ibrahim, Zaharah and Salim, Mohd. Razman and Anuar, Aznah Nor and Sulaiman, Suryati (2008) Application of Treated Sewage Effluent for Watering of Public Park and Landscape Garden. In: Advances in Water and Wastewater Treatment Technologies. Penerbit UTM , Johor, p. 70. ISBN 978-983-52-0580-4

Mohd. Said, Mohd. Ismid and Abdul Razak, Abdul Syukur and Ibrahim, Zaharah and Salim, Mohd. Razman and Nor Anuar, Aznah and Sulaiman, Suryati (2008) Microbial assessment of landscape garden watering using treated sewage effluent. In: Advances in water and wastewater treatment technologies. Penerbit Universiti Teknologi Malaysia, pp. 1-15. ISBN 978-983-52-0580-4

Mohd. Said, Mohd. Ismid and Hashim, Normala and Aziz, Ahmad Faisal and Miskam, Laila Helwa (1997) Comparison of domestic wastewater treatment using water hyacinth (eichhornia crassipes) and water convolvulus (ipomoea aquatlca). Jurnal Kejuruteraan Awam, 10 (1). pp. 21-25. ISSN 0128-0147

Mohd. Said, Mohd. Ismid and Lakshamanan, Seethadevi (1997) Performance of aerated floating aquatic plant system in wastewater treatment. Jurnal Kejuruteraan Awam, 10 (2). pp. 20-24. ISSN 0128-0147

Mohd. Salim, Noornadia Zharif (2009) Influence of unsignalized road junction spacing on traffic flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Salim, Nurul Ainain (2009) Effect of small scale discontinuities on rock strengths. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sam, Abdul Rahman and Abu Hassan, Shukur and Tan, Sim Thyd (2003) Glass fibre reinforce polymer structural selection as concrete beam reinforcement. Jurnal Kejuruteraan Awam, 15 (1). pp. 16-23. ISSN 0128-0147

Mohd. Sam, Abd. Rahman and Abu Hassan, Shukur and Abd. Hamid, Zuhairi and Muhammad, Roswadi (2007) Glass fibre reinforced polymer in Malaysian construction industry. In: 1st Construction Industry Research Achievement International Conference (CIRAIC 2007), 2007, PWTC, KL.

Mohd. Sam, Abdul Rahman (1993) High-strength concrete : Mix design procedures and laboratory testings on strength properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sam, Abdul Rahman and Ariffin, Nur Farhayu and Hussin, Mohd Warid and Han, Seung Lee and Ismail, Mohamed A. and Abdul Shukor Lim, Nor Hasanah and Khalid, Nur Hafizah A. and Samadi, Mostafa and Mirza, Jahangir and Abd. Majid, Muhd Zaimi (2015) Performance of epoxy resin as self-healing agent. In: The 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Mohd. Sam, Abdul Rahman and Hussin, Mohd. Warid and Han, Seung Lee and Ismail, Mohamed A. and Samadi, Mostafa and Abdul Shukor Lim, Nor Hasanah and Ariffin, Nur Farhayu and Abd. Khalid, Nur Hafizah (2015) Incorporation of homogenous ceramic tile waste to enhance mechanical properties of mortar. In: 2nd International Conference on Construction and Building Engineering (ICONBUILD 2015), 11-13 August, 2015, Indonesia.

Mohd. Sam, Abdul Rahman and Ishak, M. Y. and Abu Hassan, S. (2006) Advanced composites in Malaysian construction industry. In: 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5-6 September 2006, Kuala Lumpur, Malaysia.

Mohd. Sam, Abdul Rahman and Samadi, Mostafa and Hussin, Mohd. Warid and Han, Seung Leed and Ismail, Mohamed A. and Abdul Shukor Lim, Nor Hasanah and Ariffin, Nur Farhayu and A. Khalid, Nur Hafizah and Abd. Majid, Muhd. Zaimi and Mirza, Jahangir (2015) Incorporation of homogenous ceramic tile waste to enhance mechanical properties of mortar. Jurnal Teknologi, 77 (16). pp. 21-25. ISSN 2180-3722

Mohd. Samian, Mohd. Firhan (2012) Secure e-letter enterprise management framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sani, Mohd. Syahrul Hisyam and Muftah, Fadhluhartini and Muda, Mohd. Fakri and Tan, Cher Siang (2016) Resistance of built-up cold-formed steel channel columns filled with concrete. Jurnal Teknologi, 78 (5-2). pp. 99-104. ISSN 0127-9696

Mohd. Sani, Mohd. Syahrul Hisyam and Muftah, Fadhluhartini and Tan, Cher Siang and Md. Tahir, Mahmood (2016) Strengthening method and structural performance of cold-formed cut-curved steel under compression. Jurnal Teknologi, 78 (5-3). pp. 91-96. ISSN 0127-9696

Mohd. Sanip, Suhaila and Ismail, Ahmad Fauzi and Aziz, Madzlan and Soga, Tetsuo (2009) Functionalized carbon nanotubes for mixed matrix membrane. IEICE Transactions on Electronics, E92-C (12). pp. 1427-1431. ISSN 0916-8524

Mohd. Satar, Mohd. Khairul Idham (2009) Development of software for rigid pavement thickness design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Satar, Mohd. Khairul Idham (2016) Repeatability of reclaimed asphalt pavement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Shariff, Noor Suryati (2011) A network-based real-time kinematic positioning system for Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Shukri, Farah Syazwani (2013) Free vibrations of laminated symmetric angle-ply annular circular plates using spline function. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Sofi , Nursyazwani (2010) Critical competencies for effective services in private finance initiativ e (PFI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Syaifu, Mohd. Murad (2013) Properties of crushed recycled fine aggregate in concrete mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Tahir, Siti Fariza Mior (2013) Prediction model of underground corrosion on steel pipeline using in-situ parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Taib, Nur Athirah and Bidin, Noriah and Haris, Hazlihan and Adnan, Nurul Nadia and Ahmad, M. (2016) Multi-walled carbon nanotubes saturable absorber in Q-switching flashlamp pumped Nd:YAG laser. Optics and Laser Technology, 79 . pp. 193-197. ISSN 0030-3992

Mohd. Warid, Muhammad Naqiuddin and Hainin, Mohd. Rosli and Yaacob, Haryati and A. Aziz, Md. Maniruzzaman Aziz and Mohd. Satar, Mohd. Khairul Idham (2014) Thin cold-mix stone mastic asphalt pavement overlay for roads and highways. Materials Research Innovations, 18 . S6303-S6306. ISSN 1432-8917

Mohd. Yassin, Airil Yasreen (2002) Composite action of stiffened composite beam and the performance of headed stud in half-slab system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yazid, Yazlin Salfiza (2014) Development of framework for green highway implementation in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yunus, Mohd. Zulkifli (1992) Modern Geographic Information Systems. Buletin Ukur, 3 (1). pp. 63-70.

Mohd. Yunus, Mohd. Zulkifli (1997) The potential of slimpac as a management information system sofiware - an overview. Jurnal Kejuruteraan Awam, 10 (2). pp. 1-10. ISSN 0128-0147

Mohd. Yunus, Mohd. Zulkifli and Ahmad, Fatimah Shafinaz (2015) GIS technology as a tools to predict landslide. In: The 9th Malaysian Technical Universities Conference on Engineering and Technology 2015 (MUCET 2015), 11-13 Oct, 2015, Johor Bahru, Johor.

Mohd. Yunus, Mohd. Zulkifli and Che Puan, Othman and Sajjadi, Seyed Mahdi (2015) A multivariate methodology for determining the optimal highway alignment candidate based on geographic. Jurnal Teknologi, 76 (14). pp. 127-141. ISSN 0127-9696

Mohd. Yunus, Mohd. Zulkifli and Che Puan, Othman and Sajjadi, Seyed Mahdi and Navaz, Taha Mehman (2015) Assessment of air polution cost for highway alignment optimization. In: Proceedings of 1st Icril-International Conference on Innovation in Science and Technology (IICIST 2015), 20 Apr, 2015, Kuala Lumpur, Malaysia.

Mohd. Yunus, Mohd. Zulkifli and Omar, C. M. and Ismail, Zulhilmi (2016) GIS-Based assessment of mangrove response to shoreline change along the Coast of Kukup Island, Johor. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3747-3754. ISSN 1819-6608

Mohd. Yunus, Mohd. Zulkifli (Penterjemah and Mat Amin, Zulkarnaini (Penterjemah (1996) Ukur kejuruteraan lanjutan : masalah dan penyelesaian. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0050–5

Mohd. Yunus, Nor Zuraihetty (2007) Stabilization of organic clay usinglime-added salt. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Mohd. Yunus, Nor Zurairahetty and Wanatowski, Dariusz and Stace, Rod and Marto, Aminaton and Kassim, Fuad and Abdul Hassan, Norhidayah (2014) Undrained & drained behavior of lime-treated organic clay with calcium chloride (CaCl2). Electronic Journal of Geotechnical Engineering, 19 . pp. 1595-1610. ISSN 1089-3032

Mohd. Yunus, Nor Zurairahetty and Wanatowski, Dariusz and Stace, L. R. (2013) The influence of chloride salts on compressibility behaviour of lime-treated organic clay. International Journal of Geotechnics, constructions, materials & environment (GEOMATE), 5 (1). pp. 640-646. ISSN 2186-2990

Mohd. Yunus, Nor Zurairahetty and Yong, Chin Yung and Abdullah @ Aziz, Norliana (2013) Stabilization of laterite soil by canlite. In: 9th International Conference of Geo-Technical & Transportation Engineering (Geotropika) and 1st International Conference on Construction and Building Engineering (Iconbuild) (Geocon), 2013.

Mohd. Yusak, Mohd. Ibrahim and Jaya, Ramadhansyah Putra and Hainin, Mohd. Rosli and Ismail, Che Ros and Wan Ibrahim, M. H. (2015) Strength of porous concrete pavement at different curing methods. Jurnal Teknologi, 76 (14). pp. 99-103. ISSN 0127-9696

Mohd. Yusak, Mohd. Ibrahim and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Wan Ibrahim, Mohd. Haziman and Ismai, Che Ros (2015) Effect of nano silica on the physical property of porous concrete pavement. In: International Conference on Green Chemical Engineering Technology, 24-25 Nov, 2015, Melaka, Malaysia.

Mohd. Yusof, Abdul Halim (2010) Preparation and characterization of antibacterial silver-dispersed polymer membranes. Project Report. CHEMICAL ENGINEERING, SKUDAI,JOHOR. (Unpublished)

Mohd. Yusof, Khairul Nizar (2002) Mineralogi, mikrosstruktur dan komposisi kimia tanah baki granit di Semenanjung Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yusof, Mohd. Badruddin and Othman, Fadil (2008) Factors affecting municipal solid waste generation : a case study in Southern Peninsula of Malaysia. In: Waste Book. Penerbit UTM , Johor.

Mohd. Yusof, Mohd. Badruddin and Othman, Fadil and Mohd. Din, Fadhil and Azman, Shamila (2006) Air pollution levels in Pasir Gudang commercial, residential, and industrial areas. In: SEPKA 2006- National Seminar on Civil Engineering Research- Engineering and Scientific Research Towards a Better and Sustainable Future Development, 2006, UTM Skudai, Johor.

Mohd. Yusof, Noordin and Aluwi Shakir, Noor Adila and Sudin, Izman and Kurniawan, Denni (2012) Acid pretreatment of WC-Co prior to CVD diamond coating. Advanced Materials Research, 576 . pp. 626-629. ISSN 1022-6680

Mohd. Yusof, Othman and Mahmud, Mohd. Razali (2007) The establishment of automatic detection procedures for far and near outliers in multibeam echo sounding dataset. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Mohd. Yusof, Sha'ri and Nabi Baksh, Mohamed Shariff and Hassan, Adnan and Sharif, Safian (2007) Development of a postgraduate program in industrial engineering-process and lessons learned. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Mohd. Yusof, Sha'ri and Nilda, Tri Putri (2009) Critical success factors for implementing quality engineering tools and techniques in Malaysian's and Indonesian's automotive industries : an exploratory study. In: IMECS 2009 : International Multi-Conference of Engineers and Computer Scientists. Lecture Notes in Engineering and Computer Science, 1-2 . Int Assoc Engineers-Iaeng, Hong Kong, pp. 1736-1741. ISBN 978-988-17012-2-0

Mohd. Yusoff, Abd. Razak (1999) Prinsip asas Remote Sensing. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Mohd. Yusuf, Aminah and Abd. Majid, Muhd. Zaimi and Zakaria, Rozana (2001) An effectiveness of communication in project undertaking: problems and constraints. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Yusuf, Aminah and Omar, Ismail and Mustaffa, Nur Emma and Mohd. Hassan, Wan Hasitinaziah (2001) Aanalisis kitaran ekonomi dan industri pembinaan di Malaysia. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Mohd. Zaki, Mohd. Zahlan and Kamarudin, Md. Nor (2005) Tropospheric delay effects on relative GPS height determination. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27-29 September 2005, Pulau Pinang.

Mohd. Zaki, Wan Ahmad Faiz (2015) The influence of success factors toward software development project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zin, Nor Athirah and Khan, Ilyas and Shafie, Sharidan (2015) Thermal radiation in unsteady MHD free convection flow of Jeffrey fluid with ramped wall temperature. In: Simposium Kebangsaan Sains Matematik Ke-23, 24-26 Nov,2015, Johor Bahru, johor.

Mohd. Zin, Zainiah (2008) A stochastic approach to designing stormwater detention pond. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zul, S. and Surugau, N. (2016) Effects of ascorbic acid and ferum ions concentration on the hydrolysis of glucosinolate and myrosinase activity in the watercress (Nasturtium officinale sp.). Jurnal Teknologi, 78 (8). pp. 133-138. ISSN 0127-9696

Mohd.Sam, Abdul Rahman and Swamy, R. Narayan (2005) Flexural behaviour of concrete beams reinforced with glass fibre reinforced polymer bars. Jurnal Kejuruteraan Awam, 17 (1). pp. 49-57. ISSN 0128-0147

Mohd.Sam, Abdul Rahman and Awang, Abdullah Zawawi and Ibrahim, Izni Syahrizal and Samadi, Mostafa and Tai, Kah Mon (2016) Flexural behaviour of steel fibre reinforced concrete slabs. In: Proceedings of the 11th International Civil Engineering Postgraduate Conference - The 1st International Symposium On Expertise of Engineering Design (SEPKA-ISEED'16), 2016, Skudai, Johor.

Mohd.Sam, Abdul Rahman and Gholami, Mehran and Mohamad Yatim, Jamaludin and Abu Hassan, Shukur (2015) Performance of carbon fibre reinforced polymer plate bonding system under various environmental conditions. In: 9th Asia Pacific Structural Engineering and Construction Conference and 8th Asean Civil Engineering Conference, 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mohmad Lehan, Nur Fadzlina Aini and Abu Bakar, Rabieahtul and Razak, Khamarrul Azahari (2014) Weathering satellite system in Royal Belum: a methodological framework and challenges. In: National Conference on Royal Belum 2014, 9-10 Dec, 2014, Perak, Malaysia.

Mohsenipour, Morteza and Asgari, Hamid and Shahid, Shamsuddin and Hadipuor, Sahar and Roushenas, Peiman (2015) Two-dimensional simulation of nitrate transport in an agriculture-intensive region. Asian Journal of Water, Environment and Pollution, 12 (1). pp. 45-52. ISSN 0972-9860

Mohy Eldin, Mohamed S. and El Enshasy, Hesham and Hassan, Enas A. and M. Haroun, Bakry and Hassan, Mohamed (2012) Covalent immobilization of penicillin G acylase onto amine-functionalized PVC membranes for 6-APA production from penicillin hydrolysis process. Ii. Enzyme immobilization and characterization. Journal Of Applied Polymer Science, 125 (5). pp. 3820-3828. ISSN 0021-8995

Moideen, S. N. F. and Md. Din, M. F. and Ponraj, M. and Mohd. Yusof, M. B. and Ismail, Z. and Songip, A. R. and Chelliapan, S. (2016) Wasted cockle shell (Anadara granosa) as a natural adsorbent for treating polluted river water in the fabricated column model (FCM). Desalination and Water Treatment, 57 (35). pp. 16395-16403. ISSN 1944-3994

Mok, Hun Yew (2007) The optimization of shear buckling resistance of trapezoidal web plate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mokhatar , Shahrul Niza (2009) Finite element simulation of reinforced concrete slabs under impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mokhtar, Kasypi and Che Puan, Othman and Abd. Hamid, Saharuddin (2008) Containerisation and intermodality : a case of Malaysian Port. In: Sustainable Transportation Systems and Seaport Operations. Penerbit UTM , Johor, p. 162. ISBN 978-983-52-0572-9

Mokhtar, Nor Aieni and Kassim, Azman and Gofar, Nurly (2004) Combining design methodologies for the development of a practical and effective approach to erosion control systems. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mokhtar, Noraieni (1992) Development and studies on laser-doppler velocimetry method of measuring water flow in small ducts. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mokhtar, Rafidah (2002) Angkatap bahan-bahan binaan bagi rumah pejabat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Molkaraie, Pouya (2013) Evaluation of bearing capacity due to radial expansion using expanding piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Momeni, Ehsan and Nazir, Ramli and Armaghani, Danial Jahed Ahed and Mohd. Amin, Mohd. For Mohd. and Mohamad, Edy Tonnizam Onnizam (2015) Prediction of unconfined compressive strength of rocks: a review paper. Jurnal Teknologi, 77 (11). pp. 43-50. ISSN 0127-9696

Momeni, Ehsan and Nazir, Ramli and Jahed Armaghani, Danial and Maizir, Harnedi (2014) Prediction of pile bearing capacity using a hybrid genetic algorithm-based ANN. Measurement: Journal of the International Measurement Confederation, 57 . pp. 122-131. ISSN 0263-2241

Monjezi, M. and Baghestani, M. and Shirani Faradonbeh, R. and Pourghasemi Saghand, M. and Jahed Armaghani, D. (2016) Modification and prediction of blast-induced ground vibrations based on both empirical and computational techniques. Engineering with Computers, 32 (4). pp. 717-728. ISSN 0177-0667

Moradi, Marjan and Rezazadeh, Javad and Ismail, Abdul Samad (2012) A reverse localization scheme for underwater acoustic sensor networks. Sensors, 12 (4). pp. 4352-4380. ISSN 1424-8220

Moravej, Hossein (2014) Non-linear dynamic and push-over analysis of an Air Traffic Control tower. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moravej, Hossein and Vafaei, Mohammadreza and Abu Bakar, Suhaimi (2016) Seismic performance of a wall-frame air traffic control tower. Earthquake and Structures, 10 (2). pp. 463-482. ISSN 2092-7614

Moravveji, Mohammad Yousef (2013) Selection of the industrilized building material supplier by analytic hierarchy process method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Morshed, T. and Kai, Y. and Matsumura, R. and Park, J. H. and Chikita, H. and Sadoh, T. and Hashim, A. M. (2016) Formation of large-grain crystalline germanium on single layer graphene on insulator by rapid melting growth. Materials Letters, 178 . pp. 147-150. ISSN 0167-577X

Mosa, Ahmed Mancy and Ismail, Norfarah Nadia and Md. Yusoff, Nur Izzi and Mubaraki, Muhammad Ali and Memon, Naeem Aziz and Taha, Mohd. Raihan and Hainin, Mohd. Rosli (2015) An expert system to remedy concrete imperfections and their effects on rigid pavements. Jurnal Teknologi, 76 (14). pp. 105-119. ISSN 2180–3722

Mosavat, Masoumeh (2009) Change order causes and control in the oil and gas construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mosmin, Zairulakmar (2008) Self assessment tool for chemical health risks in the work environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Movassaghi, Mohammad (2010) A study on rock throw phenomena in boulder controlled blasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mu'azu, Mohammed Abdullahi and Ali, Nazri and Ahmed, Kamarudin (2010) Rainfall evaluation of root water uptake induced deformation. ARPN Journal of Engineering and Applied Sciences, 5 (8). pp. 32-41. ISSN 1819-6608

Mubarak-Ali, Al-Fahim and Sulaiman, Shahida (2015) Enhancing a hybrid pre-processing and transformation process for code clone detection in .Net application. Jurnal Teknologi, 77 (9). pp. 165-172. ISSN 2180-3722

Muda, Mohd. Fakri (2009) The properties and flexural behaviour of self compacting concrete using rice husk ash and admixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muda, Nur Hanismahiza (2015) Determination of nutrients and metals content in liquid generated from composted food waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mudiyono, Rachmat and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Ling, Tung Chai (2007) Performance of concrete block pavement on sloped road section. International Journal of Pavement (IJP), 6 (1-2-3). pp. 1-10. ISSN 1676-2797

Mudiyono, Rachmat and Md. Nor, Hasanan and Ling, Tung Chai (2006) The effect of joint width between blocks in concrete block pavement. In: Regional Postgraduate Conference on Engineering and Science (RPCES 2006), 26th - 27th July 2006, Universiti Teknologi Malaysia, Skudai, Malaysia.

Muftah, Fadhluhartini and Mohd. Sani, Mohd. Syahrul Hisyam and Mohammad, Shahrin and Md. Tahir, Mahmood (2014) Ultimate load of built-up cold formed steel column. ARPN Journal of Engineering and Applied Sciences, 9 (11). pp. 2095-2101. ISSN 1819-6608

Muftah, Fadhluhartini and Mohd. Sani, Mohd. Syahrul Hisyam and Mohammad, Shahrin and Ngian, Shek Poi and Md. Tahir, Mahmood (2016) Temperature rise of cold-formed steel built-up back-to-back column under standard fire. Jurnal Teknologi, 78 (5-4). pp. 1-6. ISSN 0127-9696

Muftah, Fadhluhartini and Muda, Mohd. Fakri and Mohd. Sani, Mohd. Syahrul Hisyam and Tan, Cher Siang (2013) Investigation on stress profile of double bolted cold-formed steel channel beam. International Journal of Engineering and Technology, 5 (4). pp. 466-468. ISSN 1793-8236

Mughal, Moazzam Ali (2015) Rheological properties of styrene-butadiene-rubber modified bitumen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhamad, Diana (2008) Accuracy of digital elevation model derived from non- metric images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Muhamad, M. S. and Salim, M. R. and Lau, W. J. and Hadibarata, T. and Yusop, Z. (2016) Removal of bisphenol A by adsorption mechanism using PES-SiO2 composite membranes. Environmental Technology (United Kingdom), 37 (15). pp. 1959-1969. ISSN 0959-3330

Muhamad, M. S. and Salim, M. R. and Lau, W. J. and Yusop, Z. and Hadibarata, T. (2016) The removal of bisphenol a in water treatment plant using ultrafiltration membrane system. Water, Air, and Soil Pollution, 227 (7). ISSN 0049-6979

Muhamad, Mimi Suliza and Salim, Mohd. Razman and Lau, Woei-Jye (2015) Surface modification of SiO2 nanoparticles and its impact on the properties of PES-based hollow fiber membrane. RSC Advances, 5 (72). pp. 58644-58654. ISSN 2046-2069

Muhamad, Rahimah (2003) Analisis terperinci kaedah unsur terhingga tidak lelurus untuk rasuk bertetulang tunggal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhamad Askari, Muhamad Askari and Heryansyah, Arien and Yusop, Zulkifli and Harun, Sobri and Syafiuddin, Achmed and Zainal Abidin, Mohamed Roseli and Setiawan, Budi Indra and Mohd. Dom, Norlida and Rudiyanto, Rudiyanto (2015) Modeling water flow through loamy soil containing an artificial macropore: effects of macropores dimensions and initial water content. In: Unesco International Workshop: South-South Cooperation for Modelling and Managing Hydro-Hazards, 31 Aug-1 Sept, 2015, Indonesia.

Muhamad Nor, Nur Syahriza and Othman, Che Puan and Mashros, Nordiana (2015) An alternative method of estimating space-mean speed. Jurnal Teknologi, 76 (14). pp. 29-35. ISSN 2180–3722

Muhamad Zin, Rosli and Kai Siong, Woon (2007) Integrating constructability input into the design process. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Muhamad, M. N. and Barnes, P. and Fentiman, C. H. and Hausermann, D. and Pollmann, H. and Rashid, S. (1993) A time-resolved synchrotron energy dispersive diffraction study of the dynamic aspects of the synthesis of ettringite during minepacking. Cement and concrete research , 23 . pp. 267-272. ISSN 0008-8846

Muhamed Yunus, Ahmad Jailani and Nakagoshi, Nobukazu and Ibrahim, Abd. Latif (2003) Application of GIS and remote sensing for measuring and evaluating land-use change and its impact on water quality in the Pinang River Watershed. Ecology and Civil Engineering, 6 (1). pp. 97-110.

Muhammad, Akilu and Abdullah, Redzuan and Yassin, Mohd. Salleh (2014) Effect of creep on time-dependent behaviour of prestressed concrete integral abutment bridge. In: National Seminar on Civil Engineering Research (SEPKA 2014), 14-15 April, 2014, Skudai, Johor.

Muhammad, Akilu and Ahmad, Yusof and Abdullah, Redzuan (2012) A review on the finite element modelling of integral abutment bridges. In: Joint Conference APSEC-ICCER 2012, Surabaya, Indonesia, 2-4 Oct 2012.

Muhammad, Bala (2009) Impact of natural rubber latex on engineering properties of concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad, Bala and Ismail, Mohammad and Ali Yussuf, Abdirahman and Muhammad, A. R. B. (2011) Elastomeric influence of rural rubber latex on cement mortar at high temperatures using thermal degradation analysis. Construction and Building Materials, 25 (5). pp. 2223-2227. ISSN 0950-0618

Muhammad, Bala and Ismail, Mohammad and Haron, Zaiton and A. Yussuf, Abdirahman (2012) Elastomeric effect of natural rubber latex on compressive strength of concrete at high temperatures. Journal Of Materials In Civil Engineering, 23 (12). pp. 1697-1702. ISSN 0899-1561

Muhammad @ Munir, Samikhah (2009) Performance of hot mix asphalt gradation using bailey method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad Abdul Haq Shahib, Shahhul Hameed Shahib (2007) Document management model for collaborative construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad Nor Hafidzi Mahat, (2013) Buckling analyses of triaxial weave fabric composites under thermal and mechanical loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhd Yunus, Salmiati (2011) Respirometry of palm oil mill effluent (POME) using cod-fractionation at different substrates as carbon sources. In: The 4th Iwa-Aspire Conference & Exhibition.

Muhd. Yunus, Salmiati (2002) Analisis kimia dan penggunaan jermang keluli relau arka elektrik (EAF) sebagai agregat dalam mortar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mukhlas, Nurul ‘Azizah and Mashros, Nordiana and Che Puan, Othman and Hassan, Sitti Asmah and Abdul Hassan, Norhidayah and Abdullah, Rini Asnida and Rahman, Raha (2016) Effect of rainfall on traffic flow characteristics during night time. Jurnal Teknologi, 78 (42553). pp. 1-7. ISSN 0127-9696

Munajat, Yusof (1997) High speed optical studies of laser induced acoustic wave and phase measurement interferometry system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muniandy, Josilva M. and Yusop, Zulkifli and Askari, Muhamad (2014) Nutrient and sediment transport from two different agriculture land uses. In: 1st National Conference on Nonpoint Sources Pollution (NPS 2014), 14-15 May, 2014, Kuala Lumpur, Malaysia.

Munikanan, Vikneswaran (2011) Sustainable neighbourhood elements for urban neighbourhood planning and design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muniyandi, S. K. and Sohaili, J. and Hassan, A. (2016) Accelerated weathering properties of compatibilized composites made from recycled HDPE and nonmetallic printed circuit board waste. Journal of Applied Polymer Science, 133 (11). ISSN 0021-8995

Muniyandi, Shantha Kumari (2015) Composite material production of nonmetallic printed circuit board waste with recycled high density polyethylene. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Munthoub, D. I. and Rahman, W. A. W. A. (2011) Tensile and water absorption properties of biodegradable composites derived from cassava skin/poly vinyl alcohol with glycerol as plasticizer. Sains Malaysiana, 40 (7). pp. 713-718. ISSN 0126-6039

Murlidhar, B. R. and Mohamad, E. T. and Armaghani, D. J. (2016) Potential alkali silica reactivity of various rock types in an aggregate granite quarry. Measurement: Journal of the International Measurement Confederation, 81 . pp. 221-231. ISSN 0263-2241

Musa, Tajul A and Lim, Samsung and Rizos, Chris (2006) Network-based RTK Positioning: Impact of Separating Dispersive and Non-dispersive Components on User-side Processing Strategy. GPS Solutions . ISSN 1080-5370 (print version) 1521-1886 (electronic version) (Submitted)

Musa, Tajul A and Lim, Samsung and Yan, Thomas and Rizos, Chris (2006) Mitigation of Distance-Dependent Errors for GPS Network Positioning. International Global Navigation Satellite Systems Society (IGNSS), Australia .

Musa, Tajul A and Wang, Jinling and Rizos, Chris and Lee, Young-Jin and Mohamed, Azhari (2005) Mitigating Residual Tropospheric Delay to Improve User’s Network-Based Positioning. Journal of Global Positioning Systems, 3 (1-2). pp. 322-330.

Musa, Tajul A and Wang, Jinling and Rizos, Chris and Satirapod, Chalemchorn (2003) Stochastic modelling for network-based GPS positioning. Proceedings of the 6th International Symposium on Satellite Navigation Technology Including Mobile Positioning & Location Services, Melbourne, Australia . ISSN 0-646-42494-7 (ISBN)

Musa, Fazilah (2010) Factors associated with communication performance in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musa, Sabariah and Zakaria, Nor Azazi and Sai, Hin Lai and Tjahjanto, Dwi (2010) The drainage exchange of stormwater potential in flat area problems. Journal of Environmental Science and Engineering, 4 (10). pp. 1-8. ISSN 1934-8932

Musa, Tajul A. and Lim, Samsung and Rizos, Chris (2005) GPS network-based approach to mitigate residual tropospheric delay in low latitude areas. In: Proceedings of 18th Int. Tech. Meeting of the Satellite Division of the Inst. of Navigation, 13-15 Sept 2005, Long Beach, California, USA.

Musa, Tajul A. and Lim, Samsung and Rizos, Chris (2005) Low latitude troposphere: a preliminary study using GPS CORS data in South East Asia. In: United States Institute of Navigation National Tech. Meeting, 24-26 Jan 2005, San Diego, California.

Musa, Tajul A. and Lim, Samsung and Rizos, Chris (2005) Modelling of dispersive and non-dispersive effects on network-based positioning. In: Dynamic Planet 2005, 22-26 Aug 2005, Cairns, Australia.

Musa, Tajul A. and Wang, Jinling and Rizos, Chris and Lee, Young-Jin and Mohamed, Azhari (2004) Mitigating Residual Tropospheric Delay to Improve User’s Network-Based Positioning. In: GNSS 2004, 6-8 Dec 2004, The University of New South Wales, Sydney, Australia.

Musa, Zalili (2003) Sistem pengesanan kerosakan pada jalinan tekstil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Muslim, Shukri (2011) Indeks insuran banjir ekstrim kawasan tropika separa bandar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musta, Baba and Kassim, Khairul Anuar and Rajeev Kumar, Prasannan Pillai (2010) Effect of lime on stabilization of mining waste from Sabah, Malaysia. Malaysian Journal of Civil Engineering, 22 (2). pp. 202-216. ISSN 1823-7843

Musta, Baba and Kassim, , Khairul Anuar and Salim, Mohd. Razman (2008) Engineering properties of lime stabilised mining waste from Sabah, Malaysia. In: Waste Book. Penerbit UTM , Johor.

Mustafa, Khairul Hafiz (2016) Evaluation of crack relief layer for roads and highways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustafa, Mohd. Kamarulzaki (2000) Pencirian gelembung peronggaan dan kajian kerosakan oleh mekanisma gelombang kejutan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mustaffa Kamal, Mohd. Firdaus (2009) Reduce, reuse, recycle and recovery technique in sustainable construction waste management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustaffar, Mushairry and Saari, Radzuan and Abu Bakar, Suhami and Moghadasi, Mostafa and Marsono, Kadir (2012) The measurement of full scale structural beam-column connection deformation using digital close range photogrammetry technique. Malaysian Journal of Civil Engineering (MJCE), 24 (2). pp. 148-160. ISSN 1823-7843

Mustaffar, Mushairry and Ahmad, Azhar and Sa'ari, Radzuan (2005) Investigating the feasibility of photogrammetric area-based image matching technique in the measurement of three-dimensional deflections of structures. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mustapha, Amir Hamzah (2009) Ultimate unit skin resistance evaluation using global strain extensometer for cast in situ pile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustapha, N. and Khairuddin, N. and Muhamad, I. I. and Hashim, S. and Siddique, M. B. M. (2016) Characterization of HEC/PANI film as a potential electroactive packaging with pH Sensor. Sains Malaysiana, 45 (7). pp. 1169-1176. ISSN 0126-6039

Mustapha, Shahabudin (Penterjemah) (1999) Garis panduan kualiti air minum: kawalan kualiti bekalan air minum untuk komuniti kecil. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0141–2

Mustapha, Shahabudin (Penterjemah) and Talib @ Alias, Hashimah (Penterjemah) and Mohd., Mohd. Asri (Penterjemah) (1996) Garis panduan kualiti air minum jilid 1. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0064–5

Musu, Masturianeh (2009) Framework for stormwater asset management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muttashar, H. L. and Hussin, M. W. and Mirza, J. and Hasanah, N. and Huseien, G. F. (2016) Engineering properties of high volume biomass waste mortar. Jurnal Teknologi, 78 (8). pp. 101-108. ISSN 0127-9696

Muyideen Oladimeji, Abdulkareem (2010) Relationship between outrigger position and external columns size in minimizing building response to wind. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

My, Amyra and Othman, Nor'azizi and Sarip, Shamsul and Ikegami, Yasuyuki and Tambi Chik, Mohd. Alshafiq and Othman, Norazli H. and Yacob, Ridzuan and Hara, Hirofumi and Zakaria, Zuriati (2015) Simulation study on enhancing hydrogen production in an ocean thermal energy (OTEC) system utilizing a solar collector. Jurnal Teknologi, 77 (1). pp. 25-31. ISSN 0127-9696

Md. Yusoff, Nelidya and Abas, Ahmad Fauzi and Hitam, Salasiah and Mahdi, Mohd. Adzir (2012) Dual-stage l-band erbium-doped fiber amplified with distributed pumping from single pump laser. Optics Communications, 28 (6). p. 1383. ISSN 0030-4018

N

Nazir, Ramli and Abd. Rahman, Ismail (2015) SICEAS-45 development of cone bearing factor for Malaysian clay. In: Seoul International Conference on Engineering and Applied Sciences, 8-10 Jan 2015, Korea.

Nabeel Najm Bahlol, (2015) Effect post treatment parameters on corrosion resistance of Ti-13Nb- 13Zr coated with hydroxyapatite via electrophoretic deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nadzif, Nor Farina (2015) Simulation of LNAPL migration and remedition at a petroleum refinery site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Naeeni, S. T. O. and Narayanan, R. (2005) Influence of plane bed on the force exerted on a cylinder oscillating in still water. Ocean Engineering, 32 . pp. 2217-2230. ISSN 00298018

Naghani, Siamak Fereidooni (2013) A one-dimensional implementation of a coupled elasto-plastic model for ductile damage based on the Gurson approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Naghshbandi, Reza (2015) Mitigation methods of progressive collapse for a 10-story reinforced concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Najafabadi, Sayed Hossein Mousavian (2010) Experimental study of reinforced concrete columns with embedded pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Naji, Aseel Shakir (2013) Features selection techniques for off-line handwritten isolated Arabic characters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Namazi, E. and Mohamad, Hisham (2012) Assessment of building damage induced by excavation using plate analogy. In: Geotechnical Aspects of Underground Construction in Soft Ground - Proceedings of the 7th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground. Taylor & Francis Group, London, pp. 455-461. ISBN 978-041568367-8

Namazi, Eshagh and Mohamad, Hisham and Beng Hong, Ahmad Kueh and Yassin, A. Y. M. (2014) Twist deformation of buildings from ground movements due to skewed-tunnel excavation. Geotechnical Aspects of Underground Construction in Soft Ground - Proceedings of the 8th Int. Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, TC204 ISSMGE - IS-SEOUL 2014 . pp. 281-286.

Namazi, Eshagh and Mohamad, Hisham and Kueh, Ahmad Beng Hong and Yassin, A. Y. M. (2014) Twist deformation of buildings from ground movements due to skewed-tunnel excavation. In: 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground, TC204 ISSMGE - IS-SEOUL 2014, 25-27 Aug,2014, Seoul, South Korea.

Nasef, M. M. and Alinezhad, S. S. and Mat, R. and Shabanzadeh, P. and Yusof, R. and Zakeri, M. and Farag, H. (2016) Preparation of alkaline polymer catalyst by radiation induced grafting for transesterification of triacetin under neural network optimized conditions. Journal of Macromolecular Science, Part A: Pure and Applied Chemistry, 53 (9). pp. 557-565. ISSN 1060-1325

Nasly, M. A. and Besar, Jusoh and Khaled, Md. S. (1997) Dynamic measurement techniques for pile capacity prediction. Jurnal Kejuruteraan Awam, 10 (2). pp. 25-31. ISSN 0128-0147

Nasri, Azzuana (2012) Elastic analysis of torsional buckling for portal frame structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nasri, Noor Shawal and Hamza, Usman Dadum and Adilah, Abdul K. and Murtala, Ahmed M. (2012) Featuring functional component groups of sustainable solid waste material on carbon dioxide capture. Advanced Materials Research, 550-55 . pp. 2065-2071. ISSN 1022-6680

Nasrollahpour, R. and Jamal, M. H. and Ismail, Z. and Rusli, N. M. (2016) Experiments on the dynamics of density currents. Jurnal Teknologi, 78 (9-4). pp. 71-76. ISSN 0127-9696

Nasrollahpour, Reza and Jamal, Mohamad Hidayat and Ghomeshi, M. and Roushenas, Peiman (2014) Experiments on density currents dynamics over conic roughness elements. In: 5th International Graduate Conference on Engineering Science and Humanity, 19-21 August, 2014, Johor Bahru, Malaysia.

Nasrollahpour, Reza and Jamal, Mohamad Hidayat and Ghomeshi, Mehdi and Roushenas, Peiman (2014) Experimental investigation on density currents propagating over smooth and rough beds. In: Seminar Penyelidikan Kejuruteraan Awam (SEPKA2014), 9-10, April 2014, Johor Bahru, Malaysia.

Nasrollahpour, Reza and Jamal, Mohamad Hidayat and Ghomesi, Mehdi and Ismail, Zulhilmi and Roushenas, Peiman (2015) Density currents dynamics over rough beds. In: Applied Mechanics and Materials, 25 Feb, 2015, Kuala Lumpur, Malaysia.

Nasution, Henry and Sumeru, Sumeru and Aziz, Azhar Abdul and Dahlan, Afiq Aiman and Zulkifli, Amirah Haziqah (2015) Potential of a variable speed compressor in achieving efficient and green train air-conditioning system. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7723-7728. ISSN 1819-6608

Nateghi, Fatemeh (2009) Construction site noise control : a case study for UTM's project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Naubi, I. B. and Zardari, N. H. and Shirazi, S. M. and Shazwin, M. T. (2015) Water quality index for the Skudai River and its tributaries for identifying the problematic areas for better watershed management. In: The 3rd International Conference on Water Resources (ICWR2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Naubi, Irena and Zardari, Noorul Hassan and Shirazi, Sharif Moniruzzaman and Ibrahim, Nurul Farahen and Baloo, Lavania (2016) Effectiveness of water quality index for monitoring Malaysian river water quality. Polish Journal of Environmental Studies, 25 (1). pp. 231-239. ISSN 1230-1485

Nawawi , Amir Azmi (2010) Time compression using fast track approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawaz, N. and Harun, S. and Othman, R. and Heryansyah, A. (2016) Application of radial basis function neural networks for modeling rainfall-runoff processes: a case study of Semenyih River catchment, Malaysia. Chiang Mai Journal of Science, 43 (6Speci). pp. 1358-1367.

Nawaz, Nadeem and Harun, Sobri and Talei, Amin (2014) Rainfall runoff modelling in a large tropical catchment by ANFIS. In: International Graduate Conference on Engineering, Science and Humanities IGCESH2014, 19-21 August, 2015, Skudai, Johor.

Nazahiyah, R. and Yusop, Zulkifli and Abustan, I. (2007) Stormwater quality and pollution loading from an urban residential catchment in Johor, Malaysia. Water Science and Technology, 56 (7). pp. 1-9. ISSN 0273-122384

Nazar, Muhammad Salman (2013) Mechanical properties of sawdust concrete incorporating palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nazir, R. and Ghareh, S. and Mosallanezhad, M. and Moayedi, H. (2016) The influence of rainfall intensity on soil loss mass from cellular confined slopes. Measurement: Journal of the International Measurement Confederation, 81 . pp. 13-25. ISSN 0263-2241

Nazir, Ramli (1994) Centrifugal modelling : a remedy of scaling error effect in geotechnical modelling? Jurnal Kejuruteraan Awam, 7 (1). 36 - 47. ISSN 0128-0147

Nazir, Ramli and El Hussein, Osman (2012) Assesment of low strain wave attenuation for piles cast in very dense granular soil. In: Conference.

Nazir, Ramli and Moayedi, Hossein and Mohd. Noor, Rozaimi and Ghareh, Soheil (2016) Development of new attenuation equation for subduction mechanisms in Malaysia water. Arabian Journal of Geosciences, 9 (20). pp. 1-6. ISSN 1866-7511

Nazir, Ramli and Moayedi, Hossein and Pratikso, A. and Mosallanezhad, Mansour (2015) The uplift load capacity of an enlarged base pier embedded in dry sand. Arabian Journal of Geosciences, 8 (9). pp. 7285-7296. ISSN 1866-7511

Nazir, Ramli and Momeni, Ehsan and Marsono, Abdul Kadir (2015) Prediction of bearing capacity for thin-wall spread foundations using ICA-ANN predictive model. In: International Conference on Civil, Structural and Transportation Engineering, 4-5 May, 2015, Canada.

Nazir, Ramli and Syam, Affiz and Razak, A. and Mansor, M. (2013) A case history of ground improvement work for Kuala Lumpur International Airport 2. In: Foundation and Soft Ground Engineering Conference, Thu Dau Mot University ICTDMU-1, Binh Duong, , 5-6 June 2013, Binh Duong, Vietnam.

Nazir, Ramli and Mohd. Ghazali, Mohd. Zulkifli (1997) Postgraduate education through university-industry link : The young engineers training programme. In: Regional seminar on postgraduate education 97 (RESPEC' 97) , 3-4 Sept. 1997, Holiday Inn Crown Plaza, Johor Bahru, Johor.

Nejat, P. and Calautit, J. K. and Abd. Majid, M. Z. and Hughes, B. R. and Zeynali, I. and Jomehzadeh, F. (2016) Wind tunnel and numerical data on the ventilation performance of windcatcher with wing wall. Data in Brief, 9 . pp. 448-452. ISSN 2352-3409

Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Jomehzadeh, F. (2016) Anti-short-circuit device: a new solution for short-circuiting in windcatcher and improvement of natural ventilation performance. Building and Environment, 105 . pp. 24-39. ISSN 0360-1323

Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Jomehzadeh, F. (2016) Data on the natural ventilation performance of windcatcher with anti-short-circuit device (ASCD). Data in Brief, 9 . pp. 252-256. ISSN 2352-3409

Nejat, P. and Calautit, J. K. and Majid, M. Z. A. and Hughes, B. R. and Zeynali, I. and Jomehzadeh, F. (2016) Evaluation of a two-sided windcatcher integrated with wing wall (as a new design) and comparison with a conventional windcatcher. Energy and Buildings, 126 . pp. 287-300. ISSN 0378-7788

Nejat, Payam and Jomehzadeh, Fatemeh and Taheri, Mohammad Mahdi and Gohari, Mohammad and Abd. Majid, Muhd. Zaimi (2015) A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries). Renewable and Sustainable Energy Reviews, 43 . pp. 843-862. ISSN 1364-0321

Nekooie, Mohammad Ali (2013) Reliability and stability of amphibious house for floodplain areas in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nekooie, Mohammad Ali and Goodall, Harvey and Mohamad, Ibrahim (2015) Selection of sustainable materials for lightweight concrete. Proceedings of the Institution of Civil Engineers: Engineering Sustainability, 168 (4). pp. 159-172. ISSN 1478-4629

Nelson, Okello (2015) Modeling of landslide occurrence in the hilly areas of Bududa District, Eastern Uganda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nelson, Okello and Kassim, Azman and Yunus, Gambo Haruna and Abu Talib, Zaihasra (2015) Modelling the effect of wind forces on landslide occurrence in Bududa district, Uganda. Jurnal Teknologi, 77 (11). pp. 35-42. ISSN 2180-3722

Nesheli, Mahmood Mahmoodi (2009) Evaluation of effect of traffic signal coordination system on congestion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nezhad Khalil Abad, Seyed Vahid Alavi (2010) Assessment on blasting-induced rock slope instability at Bandar Seri Alam, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nezhad Khalil Abad, Seyed Vahid Alavi and Tugrul, Atiye and Gokceoglu, Candan and Jahed Armaghani, Danial (2016) Characteristics of weathering zones of granitic rocks in Malaysia for geotechnical engineering design. Engineering Geology, 200 . pp. 94-103. ISSN 0013-7952

Ng, B. K. and Kanagasundram, T. and Wong, C. Y. and Chandran, V. G. R. (2016) Innovation for inclusive development in Southeast Asia: the roles of regional coordination mechanisms. Pacific Review, 29 (4). pp. 573-602. ISSN 0951-2748

Ng, Huat Hoe (2007) Numerical modeling of diaphragm wall in Kuala Lumpur limestone formation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Pei Feng (2007) Color removal from wastewater sample using electrical process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Pek Shi (2012) Crowdsourcing approach to the development of community based volunteering system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Ping Chew (2008) Comparison of creep and shrinkage using different code of practice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Teck Wei (2014) Comparison between canlite stabilized laterite and probase stabilized laterite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Zee Leong (2002) Local flange buckling of sections with trapezoidal web profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng , Sook Jen (2004) Nonlinear finite element analysis (NLFEA) of reinforcement concrete tube in tube tall building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng Yian, Ching and Abdullah, Khairul Anuar (2004) Evaluation of the UTM GPS Reference Station in Relation to JUPEM's MASS Stations. Discussion Paper. FKSG, UTM.

Ngadimin , Noor Wahyu (2010) Factors influencing to the selection of sewage treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngah, Ibrahim (2015) Inclusive regional development and the pathways for addressing socio-spatial inequality. In: International Conference on Development and Socio-Spatial Inequalities 2015, 18-20 August, 2015, Penang, Malaysia.

Ngah Samad @ Abdullah, Amizatulhani (2007) Back analysis of failed slope and the remedial measures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngang, Shue Ming (2003) The role of consulting engineer in project development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngien, S. K. and Abd Rahman, Norhan and Lewis, R. W. and Ahmad, K. (2011) Numerical modelling of multiphase immiscible flow in double-porosity featured groundwater systems. International Journal for Numerical and Analytical Methods in Geomechanics, 36 (10). pp. 1330-1349. ISSN 0363-9061

Ngien, Su Kong (2012) Experimental and numerical analysis of non-aqueous phase liquids migration in double-porosity subsurface systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngu, Siaw Ling (2012) Effect of soil nailing on the stability of a rectified slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ni'am, Moh Faiqun and Othman, Fadhil and Sohaili, Johan and Fauzia, Zulfa (2007) Removal of COD and turbidity to improve wastewater quality using electrocoagulant technique. The Malaysian Journal of Analytical Sciences, 11 (1). pp. 198-205. ISSN 1394-2506

Ni'am, Moh Faiqun and Othman, Fadil and Sohaili, Johan and Fauzia, Aulfa (2008) Electrocoagulation technique for removal of COD and turbidity to improve wastewater quality. Ultrapure Water, 25 (3). pp. 36-43. ISSN 0747-8291

Niaraki, Seyed Ali Mousavi (2010) Six sigma approach to real time cast in-situ slab concreting process improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik Azizan, Nik Zainab (2010) Building performance with different bedrock response spectrum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik Hisham, Nik Ashbil (2004) Development of a GPS buoy system for precise sea level measurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Nik Omar, Nik Nurhazirah (2008) Invalid contract administrator's instructions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nikolic, V. and Petkovic, D. and Por, L. Y. and Shamshirband, S. and Zamani, M. (2016) Potential of neuro-fuzzy methodology to estimate noise level of wind turbines. Mechanical Systems and Signal Processing, 66-67 . pp. 715-722. ISSN 0888-3270

Nilashi, Mehrbakhsh and Zakaria, Rozana and Ibrahim, Othman and Abd. Majid, Muhd. Zaimi and Mohamad Zin, Rosli and Chugtai, Muhammad Waseem and Zainal Abidin, Nur Izieadiana and Sahamir, Shaza Rina and Dodo, Yakubu Aminu (2015) A knowledge-based expert system for assessing the performance level of green buildings. Knowledge-Based Systems, 86 . pp. 194-209. ISSN 0950-7051

Nimlyat, Pontip Stephen and Kandar, Mohd. Zin and Sediadi, Eka (2015) Empirical investigation of indoor environmental quality (IEQ) performance in hospital buildings in Nigeria. Jurnal Teknologi, 77 (14). ISSN 0127-9696

Niroumand, H. and A. Kassim, Kh. and Nazir, Ramli (2011) History of horizontal anchor plates based on experimental works in cohesion less soil. In: Fifth International Symposium On Deformation Characteristics Of Geomaterials.

Niroumand, H. and A. Kassim, Kh. and Nazir, Ramli (2011) Different theories & numerical analysis of anchor plates in sand. In: Fifth International Symposium On Deformation Characteristics Of Geomaterials.

Niroumand, Hamed and Kassim, Khairul Anuar (2010) Comparison of compressive strength in mud bricks with shred tires and concrete particles as sustainable materials. Electronic Journal of Geotechnical Engineering (EJGE), 15 . pp. 1151-1158.

Niroumand, Hamed and Kassim, Khairul Anuar (2014) Uplift of symmetrical anchor plates by using grid-fixed reinforced reinforcement in cohesionless soil. China Ocean Engineering, 28 (1). pp. 115-126. ISSN 0890-5487

Niroumand, Hamed and Kassim, Khairul Anuar (2014) Uplift response of circular plates as symmetrical anchor plates in loose sand. Geomechanics and Engineering, 6 (4). pp. 321-340. ISSN 2005-307X

Niroumand, Hamed and Kassim, Khairul Anuar (2014) Uplift response of irregular shape anchor in sand. Soil Mechanics and Foundation Engineering, 51 (1). pp. 23-28. ISSN 0038-0741

Niroumand, Hamed and Kassim, Khairul Anuar (2014) Uplift response of irregular-shaped anchor in cohesionless soil. Arabian Journal for Science And Engineering, 39 (5). pp. 3511-3524. ISSN 1319-8025

Niroumand, Hamed and Kassim, Khairul Anuar (2014) Uplift response of symmetrical anchor plates in reinforced cohesionless soil. Arabian Journal of Geosciences, 7 (9). pp. 3755-3766. ISSN 1866-7511

Niroumand, Hamed and Kassim, Khairul Anuar and Ghafooripour, Amin and Nazir, Ramli (2012) Uplift capacity of enlarged base piles in sand. Electronic Journal of Geotechnical Engineering, 17 . pp. 2721-2737. ISSN 1089-3032

Niroumand, Hamed and Kassim, Khairul Anuar and Nazir, Ramli and Faizi, Koohyar (2012) Experimental behavior of circular anchor plates under uplift test in cohesive soils. Electronic Journal of Geotechnical Engineering, 17 HR . pp. 1-8. ISSN 1089-3032

Niroumand, Hamed (2010) Performance of horizontal soil hook system in sand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noor, N. M. and Mohd. Sam, S. and Mohd. Azmi, N. F. and Mohd. Yusoff, R. C. and Mohd. Zainuddin, N. M. (2016) RFID-based electronic fare toll collection system for multi-lane free flow - a case study towards Malaysia toll system improvement. Journal of Telecommunication, Electronic and Computer Engineering, 8 (4). pp. 71-76. ISSN 2180-1843

Noor, Norhazilan Md. and Yahaya, Nordin and Nor Ozman, Nor Apaziah and Othman, S. R. (2010) The forecasting residual life of corroding pipeline based on semi-probabilistic method. UNIMAS e- Journal Civil , 1 (2). pp. 1-6. ISSN 1985-3874

Noor Azlan, Noor Azida and Abdul Rahim, Ruzairi and Rahiman, Mohd. Hafiz Fazalul and Pusppanathan, Muhammad Jaysuman (2011) Overheating online detection system. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 21-38. ISBN 978-967-354-184-3

Noor Mohamed, Roslli (2001) The performance of prestressed lightweight concrete beams using palm oil clinker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noordin, Mohd. Yusof and Davoudinejad, Ali and Shaari, Mohd. Rosmaini (2012) Effect of tool edge geometry on cutting force and surface roughness when hard turning tool steel. Advanced Materials Research, 505 . pp. 15-19. ISSN 1022-6680

Nor, Nor Irwan Ahmat and Harun, Sobri and Mohd. Kassim, Amir Hashim (2007) Radial basis function modeling of hourly streamflow hydrograph. Journal Of Hydrologic Engineering, 12 (1). pp. 113-123. ISSN 1084-0699

Nor Ayob, Nor Muzakkir and Fazalul Rahiman, Mohd. Hafiz and Zakaria, Zulkarnay and Abdul Rahim, Ruzairi and Yaacob, Sazali (2011) Eminent pixel reconstruction algorithm for ultrasonic tomography. Jurnal Teknologi, 55 (2). pp. 15-22. ISSN 0127–9696

Nor Ozman, Nor Apaziah (2012) Development of an integrated assessment tool for corroding pipeline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noraini, M. N. and Abdullah, E. C. and Othman, R. and Mubarak, N. M. (2016) Single-route synthesis of magnetic biochar from sugarcane bagasse by microwave-assisted pyrolysis. Materials Letters, 184 . pp. 315-319. ISSN 0167-577X

Nordin, Khairol Azhar and Adamu, Musa and Forouzani, Parham and Ismail, Mohammad (2013) Performance of waste tyre and palm oil fuel ash concrete. Malaysian Journal of Civil Engineering, 25 (2). pp. 178-188. ISSN 1823-7843

Nordin, Noorida Haswardani (2009) Tender evaluation using "cut-off" method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nordin, Zuhaidah and Yahya, Mohd. Hafiz and Wan Mohd. Akib, Wan Aziz and Mat Amin, Zulkarnaini (2008) The utilization of RTK-GPS for real-time structural health detection. In: International Conference on Civil Engineering (ICCE 2008), 12-14 May 2008, Hyatt Regency Hotel, Kuantan, Pahang, Malaysia.

Noruzman, A. H. and Ismail, M. and Bhutta, M. A. R. and Yusuf, T. O. and Shehu, I. A. and Hassan, I. O. (2013) Strength and durability characteristics of polymer modified concrete incorporating vinyl acetate effluent. In: Material Design, Processing And Applications, Parts 1-4.

Norzailan, Z. and Othman, R. B. and Ishizaki, H. (2016) Strategic leadership competencies: what is it and how to develop it? Industrial and Commercial Training, 48 (8). pp. 394-399. ISSN 0019-7858

Nour Moussa, Ahmed (2012) Digital forensics readiness implementation framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nourbakhsh, Mehdi (2010) Mobile application prototype for on-site information management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nourbakhsh, Mehdi and Mohamad Zin, Rosli and Irizarry, Javier and Zolfagharian, Samaneh and Gheisari, Masoud (2012) Comparing information technology adoption between developing and developed countries. In: Construction Research Congress 2012: Construction Challenges in a Flat World, Proceedings of the 2012 Construction Research Congress. American Society of Civil Engineers, Reston, USA, pp. 650-657. ISBN 978-078441232-9

Nourbakhsh, Mehdi and Mydin, Shaik Hussein and Mohamad Zin, Rosli and Zolfagharian, Samaneh and Irizarry, Javier and Zahidi, Mardiyah (2012) A conceptual model to assess the buildability of building structure at design stage in Malaysia. Advanced Materials Research, 446-44 . pp. 3879-3884. ISSN 1022-6680

Nourbakhsh, Mehdi and Zolfagharian, Samaneh and Rosli, Mohamad Zin and Nekooie, Mohammad Ali and Taherkhani, Reza and Sajoudi, Masoud Navazandeh and Kasraei, Mohammadreza (2012) An integrated model to design earthquake resistant structures. Advanced Materials Research, 446-44 . pp. 890-893. ISSN 1022-6680

Nugdalla, Mohamed Abdulla (2016) Housing development for residence in Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nuid, Maria (2010) Structural behaviour of a single tendon end block. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nursidin, Nursidin (2000) Kelakuan kelesuan pada konkrit berkekuatan tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nurul Akidah Adnan, (2013) The application of finite element method in burgers' equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nusyirwan, Istas Fahrurrazi (1998) Finite element models for columns during fire. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nyat, Samsudin (2009) Sistem Pemantauan Pengurusan Projek Teknologi Maklumat ( PROMIS ) Pusat Teknologi Maklumat Dan Komunikasi. Masters thesis, Universiti Teknologi Malaysia, Fakulti Sains Komputer dan Sistem Maklumat .

Nyomek, Lydia (2010) The integration of quality management system in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

O

O'Brien, Paul Edmond and Colomb, Robert M. (2005) Generic context driven situation detection and management. In: Proceedings of the IASTED International Conference on Internet and Multimedia Systems and Applications, EuroIMSA. Elsevier, pp. 101-106. ISBN 0889864861

Ogunbode, Ezekiel Babatunde and Mohamad Yatim, Jamaludin and Ishak, Mohd. Yunus and Abdul Hamid, Hazlan and Abdul Aziz, Azmahani and Razavi, Masoud (2016) Compressive creep of kenaf bio-fibrous concrete composite under one dimensional stressing. Malaysian Journal of Civil Engineering (MJCE), 28 (3). pp. 279-289. ISSN 1823-7843

Ogunbode, Ezekiel Babatunde and Mohamad Yatim, Jamaludin and Ishak, Mohd. Yunus and Masoud, Razavi and Meisam, Razavi (2015) Potentials of kenaf fibre in bio-composite production: a review. Jurnal Teknologi, 77 (12). pp. 23-30. ISSN 0127-9696

Oh, Jol Dih (2007) Behaviour of skybridge adjoins RC building towers under wind effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Oh, Teck Yee (2009) The effect of surface roughness and curing condition on the ultimate shear capacity of composite slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Oluwasola, E. A. and Hainin, M. R. (2016) Evaluation of performance characteristics of stone mastic asphalt incorporating industrial waste. Journal of Materials in Civil Engineering, 28 (12). ISSN 0899-1561

Oluwasola, Ebenezer and Hainin, Mohd. Rosli and Aziz, M. M. A. and M. Warid, M. Naqiuddin (2013) Potentials of steel slag and copper mine tailings as construction materials: a review. In: 1st International Conference on the Science & Engineering of Materials (ICoSEM 2013), 2013.

Oluwasola, Ebenezer Akin and Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman (2015) Evaluation of rutting potential and skid resistance of hot mix asphalt incorporating electric arc furnace steel slag and copper mine tailing. Indian Journal of Engineering and Materials Sciences, 22 (5). pp. 550-558. ISSN 0971-4588

Oluwasola, Ebenezer Akin and Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and Mohd. Warid, Muhammad Naqiuddin (2016) Volumetric properties and leaching effect of asphalt mixes with electric arc furnace steel slag and copper mine tailings. Sains Malaysiana, 45 (2). pp. 279-287. ISSN 0126-6039

Oluwasola, Ebenezer Akin and Hainin, Mohd. Rosli and Aziz, Md. Maniruzzaman A. A. (2015) Evaluation of asphalt mixtures incorporating electric arc furnace steel slag and copper mine tailings for road construction. Transportation Geotechnics, 2 . pp. 47-55. ISSN 2214-3912

Oluwasola, Ebenezer Akin and Hainin, Mohd. Rosli and Md. Maniruzzaman, A. Aziz and Yaacob, Haryati and Mohd. Warid, Muhammad Naqiuddin (2014) Potentials of steel slag and copper mine tailings as construction materials. Materials Research Innovations, 18 . S6250-S6254. ISSN 1432-8917

Olyazadeh, Roya (2010) Two dimensional network adjustment and deformation analysis via MATLAB. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Omar, Abdullah Hisam (2007) The development of cadastral database selection application to support modern cadastral and Malaysia spatial data infrastructure. Project Report. Universiti Teknologi Malaysia, Malaysia.

Omar, Abdullah Hisam and Ismail, Norazman and Majeed, Zainal A. (2007) Site selection for new memorial park using GIS: muslim memorial park. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on GPS/GNSS 2007, 5-7 November 2007, Persada Johor International Convention Centre, Johor Bahru, Johor.

Omar, Abdullah Hisam and Mahmud, Razali and Othman, Rusli and Din, Usmuni (2002) Laporan penyelidikan pemetaan dasar laut menggunakan imej mentah sonar imbas sisi (seabed mapping from raw side scan sonar images). Project Report. Universiti Teknologi Malaysia, Malaysia.

Omar, Wahid and Makhtar, Ahmad Mahir and Tan, Pui Lai and Omar, Roslina and Ng, Ming Kwong (2008) Creep, shrinkage and elastic modulus data of Malaysian concrete. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Omar, Abdullah Hisam (2001) Kearah pembentukan pangkalan data kadastra berdigit kebangsaan : Sistem penukaran pangkalan data automatik. In: Seminar Geoinformasi, 2001, Pulau Pinang.

Omar, Abdullah Hisam (1999) Pengkajian dan penilaian integrasi GPS+GLONASS menggunakan ashtech GG24 surveyor di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Omar, Abdullah Hisam and A. K., Abd. Majid and Keling, Noraidah (2005) Development of Cadastral Control Information System (CCIS) online. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Omar, Abdullah Hisam and A. Kadir, Abd. Majid and Ses, Sahrum (2003) The development of georeferencing technique for conversion of existing topographic data to new geocentric-based datum. Project Report. Universiti Teknologi Malaysia, Malaysia.

Omar, Abdullah Hisam and Abd. Mukhshin, Ruzaimi (2005) Near-real-time GIS database updating system using GPS and telecommunication technologies. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Omar, Kamaludin and Ses, Sahrum and Naeije, Marc and Mustafar, Mohd. Asrul (2005) Study of sea level variation of exclusive economic zone of Malaysia. In: APEC/MRC/OMISAR The 15th workshop on Ocean Model and Information System (WOM-15), 27th-29th Sept. 2005, Jakarta, Indonesia.

Omar, Mohd. Fairuz (2009) The effect of creep on prestressed simply supported and integral bridge beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar, Mohd. Faizan Marwah and Sharif, S. and Ibrahim, M. and Hehsan, Haffidzudin and M. Busar, M. N. and Hafsa, M. N. (2012) Evaluation of direct rapid prototyping pattern for investment casting. Advanced Materials Research, 463-46 . pp. 226-233. ISSN 1022-6680

Omar, Noorliyana (2004) Aplikasi teknik pemprosesan imej digital untuk penilaian retak jalan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar, Wahid and Mohamad, Noridah and Abdullah, Redzuan (2011) Precast lightweight foamed concrete sandwich panel (PLFP) tested under axial load: preliminary results. In: Advanced Materials Research. Elsevier, Haikou, pp. 1153-1162. ISBN 978-303785127-2

Omar, Wahid and Mohammad, Shahrin (2007) Development of local design values in structural concrete design. In: 1st Construction Industry Research Achievement International Conference (CIRAIC 2007), 2007, PWTC, Kuala Lumpur.

Omar, Wahid and Tan, Pui Lai and Lee, Poh Huat and Omar, Roslina (2008) Improved prediction of pre-camber of post-tensioned prestressed I-beam. The Journal of the Institution of Engineers, Malaysia, 69 (1). pp. 32-37. ISSN 0126-513X

Omar, Wahid (Penterjemah) and Awang, Abdullah Zawawi (Penterjemah) and Hurst, M. K. (1997) Reka bentuk konkrit prategasan (UTM–Renong). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0075–0

Omar, Abdullah Hisam and A. Kadir, Abd. Majid (2006) The development of GIS online based cadastral control infrastructure. Project Report. Universiti Teknologi Malaysia, Malaysia.

Omar, Ismail (2004) Skrip jawapan terbaik. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Human resource management: an insight. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Natural resource management (NAREM)- an insight. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Pentaksiran pelaburan dan pembangunan harta tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Polisi dan pengurusan tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Teori dan amalan urus bicara harta tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Teori pembangunan harta tanah merujuk kepada halangan penawaran tanah. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Ismail (2007) Teori, polisi & amalan perumahan. Documentation. Fakulti Kejuruteraan Dan Sains Geoinformasi, Fakulti Kejuruteraan Dan Sains Geoinformasi.

Omar, Kamaluddin and Subari, Mustafa Din and Tan, Eng Liang (1998) Rekabentuk Dan Pembangunan Almanak Berdasarkan Epok J2000.0. Buletin Geoinformasi, 2 (2). pp. 267-271. ISSN 1394-7702

Omar, Wahid and Awang, Abdullah Zawawi (2006) A fundamental study of improving ductility of reinforced high-strength concrete (HSC) members. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Omid, M. H. and Varaki, M. Esmaeeli and Narayanan, R. (2007) Gradually expanding hydraulic jump in a trapezoidal channel. Journal of Hydraulic Research, 45 (4). pp. 512-518.

Ong, Boon Sheng (2002) Pembangunan perisian bagi penentuan koordinat dan bentuk geometri untuk ukur industri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ong, Choon Kian (2014) Simulation of linear and non-linear soil water deficit due to tree water uptake. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Choon Kian and Ali, Nazri (2015) Simulation of linear and non-linear soil water deficit due to tree water uptake. Jurnal Teknologi, 76 (2). pp. 51-57. ISSN 0127-9696

Ong, Eng Guan (2009) Construction waste generated in conventional method of housing construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Hock Chye (2009) Delays at unsignalised junction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ooi, Soon Lee and Salim, Mohd. Razman and Ismail, Mohammad and Ali, Md. Imtiaj (2001) Reusing treated effluent in concrete technology. Jurnal Teknologi F (34F). pp. 1-10. ISSN 0127-9696

Ooi, Wei Hong (2014) Physical and mechanical properties of concrete using fly ash and recycled concrete aggregates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Mohd. Hanim and Md. Tahir, Mahmood and Saad, Sarifuddin (2000) Fatigue shear strength of slender web plate girders. Jurnal Kejuruteraan Awam, 12 (1). pp. 9-19. ISSN 0128-0147

Osman, Azlina Saliza and Ourdjini, Ali and Idris, Siti Rabiatull Aisha and Azmah Hanim, Mohd. Ariff (2012) Effect of different aging temperatures on interfacial reaction between SAC305 and enepig surface finish. Advanced Materials Research, 415-41 . pp. 1181-1185. ISSN 1022-6680

Osman, Mohd. Hanim and Kasim, Fauziah and Saim, A. Aziz (2008) Field capacity of steel pile with corrugated web surface. In: Advanced Composite Materials Properties and Applications. Penerbit UTM , Johor, pp. 82-98. ISBN 978-983-52-0575-0

Osman, Mohd. Hanim and Kasim, Fauziah and Saim, A. Aziz (2007) Performance of load bearing pile with trapezoid web profile. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Osman, Mohd. Hanim and Kirasa, Abdul Karim and Abd. Rahman, Ahmad Baharuddin (2008) Solution to problems in structural steel design to BS 5950:Part 1: 2000. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0482–1

Osman, Mohd. Hanim and Saad, Sarifuddin and Saim, A. Aziz and Goh, Kee Keong (2007) Structural performance of composite beam with trapezoid web steel section. Malaysian Journal of Civil Engineering, 19 (2). pp. 170-185. ISSN 1823-7843

Osman, Mohd. Hanim and Saim, A Aziz and Md. Tahir, Mahmood (1999) Design and performance of tubular steel scaffolding. Jurnal Kejuruteraan Awam, 11 (1). pp. 64-79. ISSN 0128-0147

Osman, Mohd. Hanim and Saleh, Abd. Latif and Saim, A. Aziz and Ween, Fong Shiaw (2008) Analytical study on secondary bending moment in trapezoid web beam. In: Analysis, Design and Performance of Steel Section With Trapezoid Web. Penerbit UTM , Johor, pp. 26-42. ISBN 978-983-52-0575-0

Osman, Mohd. Hanim and Tan, Cher Siang and Salleh, Abd. Latif (2008) Buckling analysis of column with trapezoid web. In: Analysis, Design and Performance of Steel Section With Trapezoid Web. Penerbit UTM , Johor, pp. 43-55. ISBN 978-983-52-0575-0

Osman Dawlad, Abdirizak (2014) Evaluation of abrasion loss of asphaltic concrete subjected to ageing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Otaghsaraei, Amin Eisazadeh and Kassim, Khairul Anuar and Nur, Hadi (2011) Cation exchange capacity of a quartz-rich soil in an acidic and basic environment. In: Advanced Materials Research. Trans Tech Publications, Switzerland, 2766 -2770. ISBN 978-303785139-5

Othman, Rusli and Setan, Halim (2004) Development of a computer software for the monitoring of subsidence. In: International Symposium and Exhibition on Geoinformation (ISG) 2004, 21-23 Sept 2004, Kuala Lumpur, Malaysia.

Othman, Rusli and Setan, Halim (2005) Subsidence monitoring of offshore platforms in Malaysian waters using GPS technique. In: South East Asia Survey Congress 2005, 21-25 Nov 2005, Bandar Seri Begawan, Brunei Darussalam.

Othman, Adanan (2002) Perbandingan kaedah ujian tanpa musnah untuk kerja penilaian struktur konkrit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Che Puan and Arash Moradkhani, Roshandeh (2009) Assessment of impact of variable message signs on traffic surveillance in Kuala Lumpur. In: 2009 IEEE International Conference on Intelligence and Security Informatics, ISI 2009. Article number 5137309 . Institute of Electrical and Electronics Engineers, New York, pp. 223-225. ISBN 978-142444173-0

Othman, Fadil (2008) Adsorption process using carbon made of oil palm agricultural waste. In: Waste Book. Penerbit UTM , Johor, n/a. ISBN n/a

Othman, Fadil (2007) Application of electroprocess for water and wastewater quality improvement. In: National Seminar on Civil Engineering Research (SEPKA 2007), 11 – 12 December 2007, GoodHope Hotel, Skudai, Johor, Malaysia.

Othman, Fadil (2007) Kepentingan modal insan dalam penggurusan masyarakat. In: Persidangan Kebangsaan Pembangunan Persekitaran dan Masyarakat 2007, 17 & 18 Januari 2007, Universiti Sains Malaysia, Penang.

Othman, Fadil (2007) Kepentingan modal insan dalam pengurusan alam sekitar. In: Persidangan Kebangsaan Pembangunan Persekitaran dan Masyarakat 2007, 2007, Tanjung Bungah, Penang.

Othman, Fadil and Firmawan, Ferry and Yahya, Khairulzan (2012) Improving project performance and waste reduction in construction projects: a case study of a government institutional building project. International Journal of Technology (IjTech), 3 (2). pp. 182-192. ISSN 2086-9614

Othman, Fadil and Ni'am, M. Faiqun (2008) Electrocoagulation for wastewater. In: Advances in Water and Wastewater Treatment Technologies. Penerbit UTM , Johor, p. 103. ISBN 978-983-52-0580-4

Othman, Fadil and Salim, Mohd. Razman and Ahmad, Rahmalan (1997) Penggunaan tempurung kelapa sawit terubahsuai sebagai bahan penjerap logam berat dalam sampel airsisa. Jurnal Kejuruteraan Awam, 10 (1). pp. 1-13. ISSN 0128-0147

Othman, Fadil and Sohaili, Johan (2007) Wastewater treatment using electrocoagulation technique in enhancing sedimentation of suspended particles. In: The 3rd International Conference City Marketing, Heritage and Identity, 2007, Soegijapranata Catholic University, Indonesia.

Othman, Faezah Asmahani (2014) The mechanical properties and structural performance of hybrid fibre reinforced concrete composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Ilya Khairanis and Matteo, Postacchini and Maurizio, Brocchini and Tom, E. Baldock (2014) Sediment transport and morphodynamics generated by a dam-break swash uprush: coupled vs uncoupled modeling. Coastal Engineering, 89 . pp. 99-105. ISSN 0378-3839

Othman, Mohamad Farijal (2010) Establishing the norm of organisational structure for public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Mohamed Zahry and Shafii, Faridah (1999) The effects of electrolytes on the liquid limit of clay. Jurnal Kejuruteraan Awam, 11 (1). pp. 7-19. ISSN 0128-0147

Othman, Mohd. Hanifi and Haron, Zaiton and Hainin, Mohd. Rosli and Yahya, Khairulzan and Yaacob, Haryati and Sanik, Mohd. Erwan (2015) Malaysian transverse rumble strips: a review and recommendations for practice. Jurnal Teknologi, 73 (4). pp. 117-123. ISSN 2180-3722

Othman, Mohd. Hanifi and Haron, Zaiton and Mohd. Yusof, Mohd. Badruddin and Hainin, Mohd. Rosli and Yahya, Khairulzan and Yaacob, Haryati (2012) Evaluation of external noise produced by transverse rumble strips on rural roadways. Advanced Materials Research, 446-44 . pp. 2617-2623. ISSN 1022-6680

Othman, Muhammad Lutfi (2009) The effect of temperature on prestressed integral bridge beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Nor Hazurina (2003) Analisis dan ujikaji kelakunan rasuk komposit keluli-konkrit menggunakan keratan web berkerut. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Nor' Azizi (2002) Kajian ciri-ciri getaran kayu golf. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Norasman and Abd. Wahab, Ahmad Khairi and Jamal, Mohamad Hidayat and Samat, Shairul Rohaziawati (2015) Field investigation of seasonal variations impact on flow depths and velocities in the swash zone. In: 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Othman, Norazli and Ahmad Basri, Noor Ezlin and Muhd. Noor, M. Y. and Mohammad, Roslina (2015) Integrated solid waste management: a life cycle assessment. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6558-6561. ISSN 1819-6608

Othman, Norazli and Ahmad Basri, Nor Ezlin and Muhd. Yunus, Muhd. Noor and Mohd. Sidek, Lariyah and Othman, Nor Azizi (2009) Potential of electronic plastic waste as a source of raw material and energy recovery. Sains Malaysiana, 38 (5). 707 -715. ISSN 0126-6039

Othman, Norazli and Mohammad, Roslina and Kamaruddin, Samira Albati (2015) Prediction of electronic waste disposals from residential areas in Malaysia. Jurnal Teknologi, 74 (10). pp. 1-6. ISSN 0127-9696

Othman, Nurul Izzaida (2015) The impact of value management on project success in felda projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Rebaz Abdulghafoor (2013) Finite element analysis of prestressed concrete box girder bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Rusli (1999) Pembangunan perisian untuk analisis deformasi bagi pengesanan mendapan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Othman, Siti Nadzirah (2013) Life cycle assessment of an integrated solid waste management system in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Othman, Siti Rabe’Ah (2015) Modelling of external corrosion growth of steel pipeline in soil for tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Rusli and Setan, Halim (2005) Towards the development of subsidence monitoring strategies for offshore platforms in Malaysian waters using GPS technique. In: Dynamic Planet 2005, 22-26 Aug 2005, Cairns, Australia. (Unpublished)

Osman, Saliza Azlina and Ourdjini, Ali and Idris, Siti Rabiatull Aisha (2012) Effect of nickel doping on interfacial reaction between lead-free solder and ni-p substrate. Advanced Materials Research, 488-48 . pp. 1375-1379. ISSN 1022-6680

P

Padfield, R. and Tham, M. H. and Costes, S. and Smith, L. (2016) Uneven development and the commercialisation of public utilities: a political ecology analysis of water reforms in Malaysia. Utilities Policy, 40 . pp. 152-161. ISSN 0957-1787

Padfield, Rory and Richards, Cameron and Yusop, Zulkifli and Parkey, Jeffrey Randall and Harrison, Oliver and Christopher, Nigel Preece (2013) Tackling wicked problems in the Malaysian Water Industry: a framework for university-industry research partnerships. Journal of Governance and Development , n/a (n/a). n/a. ISSN 2289-2311

Padil, Khairul Hazman and Bakhary, Norhisham and Hao, Hong (2017) The use of a non-probabilistic artificial neural network to consider uncertainties in vibration-based-damage detection. Mechanical Systems and Signal Processing, 83 . pp. 194-209. ISSN 0888-3270

Pakizeh, Mohammad Rezaeian and Marsono, Abdul Kadir and Tap, Masine M. (2014) Structural system of safe house against tornado and earthquakes. Advanced Materials Engineering and Technology II, 594-59 . pp. 449-454. ISSN 1013-9826

Pakshir, Amir Hossein (2010) Comparative assessment of road network trip distribution using growth factor and gravity modeling techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pamela, Adeline Lo (2013) The effects of tapered sleeve in improving the achorage bond of reinforcement bar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pannert, Wolfram and Merkel, Markus and Ochsner, Andreas (2012) Acoustical properties of cellular materials. In: Mechanics and Properties of Composed Materials and Structures. Penerbit UTM, Skudai, Johor, pp. 155-168. ISBN 978-983-52-0816-4

Parapari, Danial Monsefi and Taslim, Shima and Shafaghat, Arezou (2015) Feasibility assessment of the implementation of solar and wind energy technologies in the current context of Iran-case study: Kerman. Jurnal Teknologi, 74 (4). pp. 177-181. ISSN 2180-3722

Paringga, Lanang Ardi (2010) Construction safety in Jakarta, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Parniani, S. and Hussin, Mohd. Warid and Mansour, F. R. (2011) Compressive strength of high volume slag cement concrete in high temperature curing. In: Advanced Materials Research. Trans Tech Publications, Switzerland, p. 3. ISBN 978-303785192-0

Parniani , Sasan (2010) Strength properties of high volume slag cement concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paton-Cole, Vidal Patrick (2007) Determination of slenderness limit of composite slabs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Patrick , Albert Vivian Thomas (2010) Interface shear stress distrubution of composite slab for partial interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Payam Nazari, (2013) Plastic analysis of steel frame with rigid and semi rigid connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paydar, Ali (2010) Assessment of multi-timed urban road network under cluster condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pei, Song Chee and Pei, Ling Leow and Abdul Manaf, Mohomad Shukri (2011) Auto pan tilt motion surveillance system. Jurnal Teknologi 54 (Sains & Kejuruteraan), 54 . pp. 94-108. ISSN 0127–9696

Pesaran Behbahani, Hamid (2010) Flexural behavior of steel fiber reinforced concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pezeshkzadeh, Seied Abolfazl (2012) Cost-benefit analysis of potential photovoltaic technology implementation for institutional buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Phang, Fatin Aliah and Mohd. Yusof, Khairiyah (2013) Taking the "guess-work" out of engineering education: establishing the virtuous cycle of research. Procedia - Social and Behavioral Sciences, 102 . pp. 212-220. ISSN 1877-0428

Phang, Seng Boon and Setan, Halim (2007) 3D coordinate transformation using molodensky badekas transformation model: MBT07. In: Joint International Symposium and Exhibition on Geoinformation and International Symposium and Exhibition on Gps/Gnss 2007, 5-7 November 2007, Persada Johor INternational Convention Centre,Johor Bahru, Johor.

Poi, Ngian Shek and Tan, Cher Siang and Md. Tahir, Mahmood and Sulaiman, Arizu (2011) Experimental investigation on sub-assemblage frame with cruciform column section. In: The 6Th International Symposium On Steel Structures (Isss-2011).

Ponraj, Mohanadoss and Talaiekhozani, Amirreza and Mohamad Zin, Rosli and Ismail, Mohammad and Abd. Majid, Muhd Zaimi and Keyvanfar, Ali and Kamyab, Hesam (2015) Bioconcrete strength, durability, permeability, recycling and effects on human health: a review. In: Third International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2015, 26-27 May, 2015, United Kingdom.

Poor Sabet, Pejman Ghasemi (2013) Necessary competencies of construction managers in a developing country. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Porhemmat, Mojtaba (2012) Daily stream flow forecasting using artificial neural networks (case study: the upper Bernam River basin). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pour, Amin Beiranvand and Hashim, Mazlan (2015) Palsar remote sensing data for structural geology mapping in tropical environments. In: ICONSPACE 2015, 10-12 August, 2015, Kedah, Malaysia.

Pour, Amin Beiranvand and Hashim, Mazlan (2015) Regional hydrothermal alteration mapping using landsat-8 data. In: ICONSPACE 2015, 10-12 August, 2015, Istanbul, Turkey.

Pour, Amin Beiranvand and Hashim, Mazlan and Aslami, Alireza and Ghader, Majid and Rajendran, Sankaran (2015) Intergration of aster and landsat tm satellite data for lithological mapping and chromite prospecting. In: ICONSPACE 2015, 10-12 August, 2015, Kedah, Malaysia.

Pourmohammadi, Samaneh (2010) Slope stability analyze during rapid drawdown in earth dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Prawoto, Yunan and Dillon, Barry (2012) Failure analysis and life assessment of coating: the use of mixed mode stress intensity factors in coating and other surface engineering life assessment. Jornal of Failure Analysis and Prevention, 12 (2). pp. 190-197. ISSN 1547-7029

Prawoto, Yunan and Djuansjah, Joy Rizki Pangestu and Wan Nik, W. B. and Enemuoh, Emmanuel (2012) Critical view on the usage of C-ring specimen for stress corrosion crack (SCC) test on orthopedic implant : experimental, numerical and analytical approaches. Materials Science and Engineering C, 32 . pp. 1271-1279. ISSN 0928-4931

Prawoto, Yunan and Fanone, M. and Shahedi, Saeid and Ismail, M. S. and Wan Nik, Wan Sani (2012) Computational approach using Johnson-Cook model on dual phase steel. Computational Materials Science, 54 . pp. 48-55. ISSN 0927-0256

Prayitno, Dody (2002) Growth kinetics,microstructure and mechanical properties of aluminium - silicon bar produced by near net shape casting process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Preece, Christopher Nigel and Chong, Heap Yih and Golizadeh, Hamed and Rogers, John D. (2015) A review of customer relationship implications: benefits and challenges in construction organizations. International Journal of Civil Engineering, 13 (3). pp. 362-371. ISSN 1735-0522

Preece, Christopher Nigel and Mat Isa, Che Maznah and Mohd. Saman, Hamidah and Che Ibrahim, Che Khairil (2016) Development of entry location, entry timing and entry mode decision model for construction firms in international markets. Construction Management and Economics, 34 (4-5). pp. 236-257. ISSN 0144-6193

Proyitno, Dody and Hamzah, Esah and Mohd. Ghazali, Mohd. Zulkifli (1999) Proposed formula to predict dendrite arm spacing in metal casting. In: World Engineering Congress 1999, 19-22 July 1999, Kuala Lumpur.

Puen, Thiam Seang (2002) Fire resistance of fibre reinforced plastic products. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Puteh, Marlia and Mohd. Ismail, Kamsiah (2011) Quality assurance through innovation policy: the pedagogical implications on engineering education. International Journal of Quality Assurance in Engineering and Technology Education, 1 (1). pp. 66-74. ISSN 2155-496X

Puteh, Mohd. Hafiz (2007) Pretreatment of palm oil mill effluent - a comparison study using chitosan and alum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Putra Jaya, Ramadhansyah and Abu Bakar, Badorul Hisham and Megat Johari, Megat Azmi and Wan Ibrahim, Mohd. Haziman and Hainin, Mohd. Rosli and Jayanti, Dewi Sri (2014) Strength and microstructure analysis of concrete containing rice husk ash under seawater attack by wetting and drying cycles. Advances in Cement Research, 26 (3). pp. 145-154. ISSN 0951-7197

Putra Jaya, Ramadhansyah and Md. Nor, Hasanan and Abd. Halim, Nur Hidayah (2015) Sound absorption and morphology characteristic of porous concrete paving blocks at different sizes of coarse aggregate. In: International Conference on Green Chemical Engineering Technology, 24-25 Nov, 2015, Melaka, Malaysia.

Putra Jaya, Ramadhansyah and Miron, Nurfatin Aqeela and Jeffry, Siti Nur Amiera and Manap, Norhafizah and Abdul Hassan, Norhidayah and Sri Jayanti, Dewi (2015) Use of coconut shell from agriculture waste as fine aggregate in asphaltic concrete. In: International Engineering Research and Innovation Symposium 2015, 12-13 Sept, 2015, Kuala Lumpur, Malaysia.

Putra Jaya, Ramadhansyah and Mohd. Ibrahim, Mohd. Yusak and Hainin, Mohd. Rosli and Mohd. Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd. Haziman (2014) Porous concrete pavement containing nano-silica: pre-review. Advanced Materials Research, 911 . pp. 454-458. ISSN 1022-6680

Putra Jaya, Ramadhansyah and Tan, Huan Chan and Abdul Hassan, Norhidayah and Hainin, Mohd. Rosli and Jayanti, Dewi Sri (2015) The impact of multiple blended binders on the properties and performance of concrete pavement. In: International Conference on Green Chemical Engineering Technology, 24-25 March, 2015, Melaka, Malaysia.

Q

Qader Mustafa, Hewa (2014) Post tensioning effect in column to beams by bolts of Industrialized Building System (IBS) for school buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Quah, Boon Aik (1999) Microstructures and mechanical properties of low carbon dual phase steels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

R

R., Nazahiyah and Z., Yusop and I., Abustan (2007) Urban stormwater quality and load estimation from urban residential area in Skudai, Johor. In: International Conference On Water Management and Technology Applications In Developing Countries, 2007.

Radin Sumadi, Salihuddin and Lee, Yee Loon (2008) Development of blended cements for water proofing application. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Submitted)

Radin Sumadi, Salihuddin and Ramli, Mahyuddin (2008) Development of lightweight ferrocement sandwich panels for modular housing and industralized building system. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Rafieizonooz, M. and Mirza, J. and Salim, M. R. and Hussin, M. W. and Khankhaje, E. (2016) Investigation of coal bottom ash and fly ash in concrete as replacement for sand and cement. Construction and Building Materials, 116 . pp. 15-24. ISSN 0950-0618

Rahiman, Mohd. Hafiz Fazalul and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina (2011) Image reconstruction algorithms for ultrasonic tomography. Jurnal Teknologi, 54 (1). pp. 319-329. ISSN 0127–9696 (Print); 2180-3722 (Online)

Rahiman, Mohd. Hafiz Fazalul and Abdul Rahim, Ruzairi and Krishnan, Thuraga Dewi and Mohd. Yunus, Zuraiha (2011) Infrared source for fruit maturity identification. In: Progress in Process Tomography & Instrumentation System: Series 4/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 93-100. ISBN 978-967-354-181-2

Rahmalan, Muhammad Taufiq (2009) Electrocoagulation for suspended solid removal in domestic wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahman, Mohammad Mahbur (2015) Deformation behaviour of self-compacting concrete containing high volume palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahman, R. and Johnnie, Ben Edigbe (2015) Impact of multilane median openings zone on travel speed. Jurnal Teknologi, 73 (4). pp. 15-20. ISSN 2180-3722

Rahmandoust, Moones (2012) Computational mechanics modelling of carbon nanotube-based nanocomposites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahmandoust, Moones and Öchsner, Andreas (2012) Buckling behaviour and natural frequency of zigzag and armchair single-walled carbon nanotubes. Journal Of Nano Research, 16 . pp. 153-160. ISSN 1662-5250

Rahmat, Mohd. Fua'ad and Isa, Mohd. Daud and S. Raja Hussin, Tengku Ahmad (2012) A new image reconstruction method for electrical charge tomography system. Arabian Journal of Science and Engineering, 37 (6). pp. 1625-1643. ISSN 1319-8025

Rahmat, Mohd. Fua'ad and Yaw, Wee Lee (2004) Electrostatic sensor for real-time mass flow rate measurement of particle conveying in pneumatic pipeline. Jurnal Teknologi (41D). pp. 91-104. ISSN 0127-9696

Rahmat, Mohd. fua’ad and Hakilo, Ahmed sabit (2004) Flow regime identification using neural network based electrodynamic tomography system. Jurnal Teknologi, 40 . pp. 109-118.

Rahmat, Siti Nazahiyah and Yusop, Zulkifli and Abustan, Ismail (2007) First flush loading of pollutants from urban storm runoff in Skudai, Johor. In: Prosiding Kebangsaan Awam'07, 2007, Langkawi.

Rahnamaye Aliabad, H. A. and Ghazanfari, M. and Ahmad, Iftikhar and Saeed, M. A. (2012) Ab initio calculations of structural, optical and thermoelectric properties for CoSb 3 and ACo 4Sb 12(A = La, Tl and Y) compounds. Computational Materials Science, 65 . pp. 509-519. ISSN 0927-0256

Raja Muhd. Rooshdi, Raja Rafidah and Abd. Majid, Muhd. Zaimi and Sahamir, Shaza Rina (2015) Sustainable design and construction elements in green highway. Jurnal Teknologi, 77 (16). pp. 113-118. ISSN 0127-9696

Raja Shoib, Raja Shahrom Nizam Shah (2015) Rock shaft resistance of bored piles socketed into decomposed Malaysia granite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajabi, Masoud Dehkhoda (2013) Dynamic response prediction of steel frame structure considering semi-rigid connection by applying damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajappan, Rajakumaran (2010) Structural assessment and conditional monitoring of light rail transit (LRT) line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajion, Zainul and Suwardhi, Deni and Setan, Halim and Chong, Albert K. and Majid, Zulkepli and Ahmad, Anuar and Samsudin, A. R. and Aziz, I. A. and Wan Harun, W. A. R. (2005) Coordinate systems integration for development of Malaysian craniofacial database. In: Proceedings of the 2005 IEEE, Engineering in Medicine and Biology 27th Annual Conference, 1-4 September 2005, Shanghai, China.

Rakidin, Faridah (2015) Safety improvement on arm forces construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramesh, S. and Tan, C. Y. and Peralta, C. L. and Teng, W. D. (2007) The effect of manganese oxide on the sinterability of hydroxyapatite. Science and Technology of Advanced Materials, 8 (4). pp. 257-263.

Ramlan, N. A. and Yahya, W. J. and Ithnin, A. M. and Hasannuddin, A. K. and Norazni, S. A. and Mazlan, N. A. and Sugeng, D. A. and Bahar, N. D. and Koga, T. (2016) Performance and emissions of light-duty diesel vehicle fuelled with non-surfactant low grade diesel emulsion compared with a high grade diesel in Malaysia. Energy Conversion and Management, 130 . pp. 192-199. ISSN 0196-8904

Ramli, A. and Idrus, Sevia Mahdaliza and Green, R. J. and Mohd. Supa'at, Abu Sahmah (2012) Gain flattening technique for optical wireless front-end receiver considering various large window photodetectors. Optik, 123 (24). pp. 2218-2221. ISSN 0030-4026

Ramli, Izzul (2013) Effect of fine aggregate angularity on rutting resistance of asphalt concrete AC10. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Mohd. Zamri (2007) Vulnerability study of public buildings subjected to earthquake by ATC-21, ATC-22 and finite element modeling. In: Advances in Earthquake Engineering Application. Penerbit UTM, Johor, pp. 35-48.

Ramli, Mohd. Zamri and Adnan, Azlan (2008) Analysis of prestress concrete highway bridges with and without rubber bearing. In: Advances in Earthquake Engineering Application. Penerbit UTM , Johor, pp. 93-110. ISBN 978-983-52-0571-2

Ramli, Mohd. Zamri and Adnan, Azlan (2004) Earthquake engineering education plan for low intensity earthquake region. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Ramli, Mohd. Zamri and Tay, Tzer Yong (2008) Buildings classification using applied technology council (ATC – 21). In: Advances in Earthquake Engineering Application. Penerbit UTM , Johor, pp. 49-60. ISBN 978-983-52-0571-2

Rana, Mohammad Azam and Setan, Halim and Chong, Albert K. (2005) Computer-based modeling of soft tissues for medical and gis applications. In: International Symposium & Exhibition on Geoinformation 2005 Geospatial Solutions for Managing the Borderless World,, 27 - 29 September 2005, Pulau Pinang.

Rana, Mohammad Azam and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2006) Computer assisted surgical planner for craniofacial reconstruction - imaging techniques. In: Proceedings of the Geometric Modeling and Imaging -- New Trends (GMAI'06), 5-7 July 2006, London.

Rana, Mohammad Azam and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2006) Craniofacial surgery simulation using volumetric object representations. In: Proceeding of 2 nd International Symposium on Biomedical Engineering (ISBME) 2006, 8-10 Nov 2006, Bangkok, Thailand.

Rana, Mohammad Azam and Setan, Halim and Majid, Zulkepli and Chong, Albert K. (2006) Soft tissue reconstruction for craniofacial surgery planning. In: International Symposium and Exhibition on Geoinformation 2006, 19-21 Sept 2006, Shah Alam, Selangor.

Rashid, Samad and Sarmin, N. H. and Erfanian, A. and Ali, N. M. M. (2011) On the nanobelian tensor square and capability of groups of order P2Q. Archiv der Mathematik, 97 . pp. 299-306. ISSN 0003-889X

Rashid, Samad and Sarmin, Nor Haniza and Erfanian, Ahmad and Mohd. Ali, Nor Muhainiah (2011) The nanobelian tensor square (GXG) of symplectic groups and projective symplectic groups. Scientific Research and Essays, 6 (24). pp. 5261-5264. ISSN 1992-2448

Rashvand, Pooria (2009) Energy and CO2 emission evaluation of concrete waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasiah, R. and Al-Amin, A. Q. and Ahmed, A. and Filho, W. L. and Calvo, E. (2016) Climate mitigation roadmap: assessing low carbon scenarios for Malaysia. Journal of Cleaner Production, 133 . pp. 272-283. ISSN 0959-6526

Rasib, Abd. Wahid and Omar, Abdullah Hisam and Amir Tan, Adhwa (2007) Geometric rectification technique for high resolution satellite data imagery using new geocentric-based datum. Project Report. Universiti Teknologi Malaysia, Malaysia.

Rasib, Abd. Wahid and Hashim, Mazlan (1997) Mapping seagrass from satellite remote sensing data. Proceedings of Asian Conference on Remote Sensing 1997 .

Rasin, N. and Kueh, A. B. H. and Mahat, M. N. H. and Yassin, A. Y. M. (2016) Stability of triaxially woven fabric composites employing geometrically nonlinear plate model with volume segmentation ABD constitution. Journal of Composite Materials, 50 (19). pp. 2719-2735. ISSN 0021-9983

Rasin, Norhidayah (2013) Stability of triaxial weave fabric composites employing finite element model with homogenized constitutive relation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Raupit, Freccy and Saggaff, Anis and Tan, Cher Siang and Lee, Yee Ling and Md. Tahir, Mahmood (2017) Splitting tensile strength of lightweight foamed concrete with polypropylene fiber. International Journal on Advanced Science, Engineering and Information Technology, 7 (2). pp. 424-430. ISSN 2088-5334

Rawi, Nor Hayati (2015) Flood flow reduction via optimization of outlet control structure at Setapak Jaya pond. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rawi, Noraihan Afiqah and Mohd. Zin, Nor Athirah and Mohd. Kasim, Abdul Rahman and Shafie, Sharidan (2015) G-Jitter induced MHD mixed convection flow of nanofluids past a vertical stretching sheet. In: Simposium Kebangsaan Sains Matematik ke-23, 24-26 Nov,2015, Johor Bahru, johor.

Razak, A. A. and Fohimi, N. A. M. and Zaki, S. A. and Noordin, N. H. (2016) Temperature influence on total volatile compounds (TVOCs) inside the car cabin of visible light transmittance. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8629-8634. ISSN 1819-6608

Razak, Khamarrul Azahari and Mohamad, Zakaria (2015) Landslide hazard and risk mapping: a multi-scale lidar technological approach. In: 4th International Conference on Slopes Malaysia 2015, 14-16 Sept, 2015, Kuala Lumpur, Malaysia.

Razak, Khamarrul Azahari and Mohamad, Zakaria and Ramli, Zamri and Abu Bakar, Rabieahtul and Roslee, Rodeano and Abd. Latif, Zulkiflee and Mohamed, Zainab (2015) An integrated multi-hazard risk assessment: outlining an emerging field of research and practice in Malaysia. In: Proceeding of the 4th International Conference on Slopes, Malaysia 2015, 14-16 Sep, 2015, Kuala Lumpur, Malaysia.

Razak, Khamarrul Azahari (2004) Analisa deformasi tanah runtuh menggunakan teknologi GPS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Razali, Fadilah (2007) Roles, Skills and personal characteristics of project manager in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razavi, Masoud (2013) Performance of Kenaf fiber reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razavi, Meisam and Ogunbode, Ezekiel Babatunde and Mohamad Yatim, Jamaludin and Razavi, Masoud and Mizal Azzmi, Norazura (2016) Compressive properties of kenaf/vinylester composite with different fiber volume content. In: 2nd International Conference on Science, Engineering and The Social Science (ICSESS 2016), 29 May - 01 Jun, 2016, Universiti Teknologi Malaysia, Johor..

Razman, Mohd. and Hadiwinot, Dewi Dwirianti and Ujang, Zaini (2008) Identification of sulphate reducing bacteria in membrane bioreactor treating high-sulphate wastewater. In: Advances in Water and Wastewater Treatment Technologies. Penerbit UTM , Johor, p. 146. ISBN 978-983-52-0580-4

Reddy, A. V. B. and Yusop, Z. and Jaafar, J. and Reddy, Y. V. M. and Aris, A. B. and Majid, Z. A. and Talib, J. and Madhavi, G. (2016) Recent progress on Fe-based nanoparticles: synthesis, properties, characterization and environmental applications. Journal of Environmental Chemical Engineering, 4 (3). pp. 3537-3553. ISSN 2213-3437

Rehman, Amjad and Saba, Tanzila (2012) Features extraction for soccer video semantic analysis: current achievements and remaining issues. Artificial Intelligence Review . pp. 1-11. ISSN 0269-2821

Rezania, S. and Md. Din, M. F. and Kamaruddin, S. F. and Taib, S. M. and Singh, L. and Yong, E. L. and Dahalan, F. A. (2016) Evaluation of water hyacinth (Eichhornia crassipes) as a potential raw material source for briquette production. Energy, 111 . pp. 768-773. ISSN 0360-5442

Rezania, Shahabaldin and Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Md. Sairan, Fadzlin and Kamaruddin, Siti Fatimah (2013) Nutrient uptake and wastewater purification by water hyacinth and its effect on plant growth in a batch system. Journal of Environmental Treatment Techniques, 1 (2). pp. 81-85. ISSN 2309-1185

Ridhwan, J. and Hamzah, Esah and Effendy, H. and Selamat, M. Z. and Zulfattah, Z. (2013) Effect of cooling rate on the microstructures and hardness of fe-ni-cr superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180-1053

Rijal, Zuraida Zaini and Abd. Rahman, Ahmad Baharuddin and Mohamed, Roslli Noor and Ibrahim, Izni Syahrizal and Sooria, Sherliza Zaini (2015) Comparison of bond stresses of deformed steel bars embedded in two different concrete mixes. In: 9th Asia Pacific Structural Engineering & Construction Conference (APSEC) & 8th Asean Civil Engineering Conference (ACEC), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Rijal , Zuraida Zaini (2010) Productivity rate of roof works for JKR school project scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rinaldy, Ida Syuryanti (1999) Kaedah pembayaran keatas projek pembinaan di Sumatera Barat Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rismana, Eriawan (2010) Synthesis, characterization and dielectric properties of cadmium sulfide polymer nanocomposites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rizal Yahya, Mohd. Syah (2010) Assessment of the potential benefits of four-dimensional planning and scheduling software in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rizos, Chris and Yan, Thomas and Omar, Samir and Musa, Tajul A and Kinlyside, D (2003) Implementing network-RTK: the SydNET CORS infrastructure. Proceedings of the 6th International Symposium on Satellite Navigation Technology Including Mobile Positioning & Location Services . ISSN 0-646-42494-7 (ISBN)

Roshandeh, Arash Moradkhani and Joshani, Majid and Othman, Che Puan (2009) Fuzzy logic system for variable message signs in Kuala Lumpur. In: Computing and Computational Intelligence, Proceedings. Electrical and Computer Engineering Series . World Scientific And Engineering ACAD And SOC, pp. 209-214. ISBN 978-960-474-088-8

Roshandeh, Arash Moradkhani and Nesheli, Mahmood Mahmoodi and Che Puan, Othman (2009) Evaluation of traffic characteristics: a case study. International Journal of Recent Trends in Engineering (Civil Engineering), 1 (6). pp. 62-68. ISSN 1797-9617

Roslan, Nurul Hidayah (2014) Effect of steel slag and steel sludge on concrete properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roslan, Nurul Hidayah and Ismail, Mohammad and Abdul Majid, Zaiton and Ghoreishiamiri, Seyedmojtaba and Muhammad, Bala (2016) Performance of steel slag and steel sludge in concrete. Construction and Building Materials, 104 . pp. 16-24. ISSN 0950-0618

Roslan, Siti Amni Husna and Hassan, Mohamad Zaki and Rasid, Zainudin A. and Shaikh Salim, Sheikh Ahmad Zaki and Md.Daud, Mohd. Yusof and Abdul Aziz, Sa'ardin and Sarip, Shamsul and Ismail, Z. (2015) Mechanical properties of bamboo reinforced epoxy sandwich structure composites. In: 3rd International Conference on Mechanical Engineering Research, 8-9 Aug, 2015, Pahang, Malaysia.

Roslan, Syaiful Marzuki (2012) Effect of changing suction on shear strength of unsaturated soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roslan, Syaridatul Akmar (2013) Characterization of lithium-magnesium-tellurite doped with erbium and neodymium glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rosli, Muhammad Firdaus (2013) Study of stress distribution in a cylinder using photo-elasticity method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rosli, N. S. and Markom, A. M. and Harun, S. W. and Hamzah, A. (2016) Performance analysis on double pass amplification using ZR-EDF and broadband fiber mirror (BFM). ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3313-3315. ISSN 1819-6608

Rosliza, R. and Wan Nik, W. B. and Izman, Sudin (2011) Efficiency comparison of some rural products on corrosion inhibition of al-mg-si alloy. Advanced Materials Research, 328-30 . pp. 1206-1209. ISSN 1022-6680

Roushenas, Peiman (2013) Analysis of spill oil on TiO2 and magnetic PVA : alginate beads involving chemical degradation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rubiyatno, Rubiyatno (2014) Decolorization and biodegradation of mordant orange-1 by newly isolated trichoderma harzianum RY 36 and acremonium spinosum RY 42. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rusbintardjo, Gatot and Hainin, Mohd. Rosli and Md. Yusoff, Nur Izzi (2015) Improvement in properties of expansive clay by stabilizing with Buton Rock Asphalt. Jurnal Teknologi, 73 (4). pp. 111-116. ISSN 2180-3722

Rusli, Mohd. Qamarul Arifin and Sahlan, Shafishuhaza and Abdul Rahim, Herlina (2011) Automated controlled CPU cooling system using IM35 temperature sensor. In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 267-278. ISBN 978-967-354-184-3

Rusli, Nursalasawati and Kueh, Ahmad Beng Hong and Kasiman, Erwan Hafizi (2013) The effect of magnetisation and lorentz forces in a two-dimensional biomagnetic channel flow. In: Aip Conference Proceedings.

S

Saad, Rosli and Mohamad, Edy Tonnizam and M. M., Nordiana and I. N., Azwin and Mohd. Akip Tan, Norsalkini (2013) Assessment of quarry volume using 2-D resistivity imaging method. In: AIP Conference Proceedings.

Saad, Rosli (2007) Geophysical surveys for excavatability assessment. In: The 4th International Conference on Disaster Prevention and Rehabitation, Indonesia, 2007, Diponegoro University, Indonesia.

Saad, Sarifuddin and Md. Tahir, Mahmood and Sulaiman, Arizu (2007) Finite element analysis on th estrength of flush endplate connection with trapezoid web profile beam using lusas software. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, UTM.

Saadatkhah, N. and Tehrani, M. H. and Mansor, S. and Khuzaimah, Z. and Kassim, A. and Saadatkhah, R. (2016) Impact assessment of land cover changes on the runoff changes on the extreme flood events in the Kelantan River basin. Arabian Journal of Geosciences, 9 (17). ISSN 1866-7511

Saadatkhah, Nader and Kassim, Azman and Lee, Min Lee (2015) Hulu Kelang, Malaysia regional mapping of rainfall-induced landslides using TRIGRS model. Arabian Journal of Geosciences, 8 (5). pp. 3183-3194. ISSN 1866-7511

Saadatkhah, Nader and Kassim, Azman and Lee, Min Lee (2014) Spatial patterns of precipitation, altitude and monsoon directions in Hulu Kelang area, Malaysia. Electronic Journal of Geotechnical Engineering, 19 C . pp. 521-534. ISSN 1089-3032

Saadatkhah, Nader and Kassim, Azman and Lee, Min Lee and Yunusa, Gambo Haruna (2015) Quantitative hazard analysis for landslides in Hulu Kelang area, Malaysia. Jurnal Teknologi, 73 (1). pp. 111-121. ISSN 0127-9696

Saadatkhah, Nader and Kassim, Azman and Lee, Minlee (2014) Qualitative and quantitative landslide susceptibility assessments in Hulu Kelang area, Malaysia. Electronic Journal of Geotechnical Engineering, 19 C . pp. 545-563. ISSN 1089-3032

Saadatkhah, Nader and Kassim, Azman and Lee, Minlee (2015) Susceptibility assessment of shallow landslides in Hulu Kelang area, Kuala Lumpur, Malaysia using analytical hierarchy process and frequency ratio. Geotechnical and Geological Engineering, 33 (1). pp. 43-57. ISSN 0960-3182

Saadatkhah, Nader and Kassim, Azman and Lee, Minlee and Rahnamarad, Jafar (2015) Spatiotemporal regional modeling of rainfall-induced slope failure in Hulu Kelang, Malaysia. Environmental Earth Sciences, 73 (12). pp. 8425-8441. ISSN 1866-6280

Saadon, Syaiful Akhmal and Salmiati, Salmiati and Mohd. Yusoff, Abdull Rahim and Azman, Shamila and Uy, Davin and Sathishkumar, Palanivel and Yusop, Zulkifli and Aris, Azmi and Salim, Mohd Razman and Chanveasna, Huy (2015) Heat-treated laterite as an efficient and low-cost adsorbent for the removal of arsenic. In: Water Resources in Cambodia and Southeast Asia: Challenges, Research and Impact, 30 Nov-1 Dec, 2015, Cambodia.

Saadon, Syaiful Akhmal and Salmlati, Salmlati and Mohd. Yusoff, Abdull Rahim and Azman, Shamila and Sathishkumar, Palanivel and Yusop, Zulkifli and Huy, Chanveasna and Uy, Davin (2015) Development of household arsenic removal system using local adsorbent. In: Water Resources in Cambodia and Southeast Asia: Challenges, Research and Impact, 29 Nov-1 Dec, 2015, Cambodia.

Saand, A. and Ismail, M. and Sumadi, Salihuddin Radin (2007) Influence of prepackaged polymer-modified mortar as a modifier on strength of concrete. Journal of Applied Sciences, 7 (24). pp. 4023-4027. ISSN 1812-5654

Saand, Abdullah (2007) Characteristics and performance of concrete modified with prepackaged polymer-modified mortar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saari, Syahmi (2014) Overtime in minimizing construction delay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saberi, Iman (2012) Encryption implementation enhancement of AES-CCMP in 802.111. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabri, Shaikhah (2015) Conch strombus as indicator of metal contaminations in Southern and Eastern Johor waters. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabri, Shaikhah (2009) Impact of water quality on seagrass meadow at Tanjung Kupang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabtu, Zamzillah (2008) The liability of contract administrator for wrongful certification to employer and contractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sabtu @ Othman, Hilyati (2009) Life cycle cost analysis for the repair of a ferry terminal jetty structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadeghi, Faraz and Beng, Ahmad Hong Kueh (2015) Serviceability assessment of composite footbridge under human walking and running loads. Jurnal Teknologi, 74 (4). pp. 73-77. ISSN 0127-9696

Sadeghi, Faraz (2013) Dynamic analyses of composite footbridges excited by pedestrian induced loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadeghifam, A. N. and Marsono, A. K. and Kiani, I. and Isikdag, U. and Bavafa, A. A. and Tabatabaee, S. (2016) Energy analysis of wall materials using building information modeling (BIM) of public buildings in the tropical climate countries. Jurnal Teknologi, 78 (10). pp. 35-41. ISSN 0127-9696

Sadeli, Salina (2015) The conceptual model of life cycle costing automation on green building energy efficient criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadi, Mohammadali Kazerooni (2015) A hybrid model for assessing the quality performance of demolition contractors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadi , Mohammadali Kazerooni (2010) Practical guide for demolishing reinforced concrete chimney. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadrolhosseini, A. R. and Abdul Rashid, S. and Zakaria, A. and Shameli, K. (2016) Green fabrication of copper nanoparticles dispersed in walnut oil using laser ablation technique. Journal of Nanomaterials, 2016 . ISSN 1687-4110

Saed, Katayon and Megat Mohd Noora, Megat Johari and Liew Abdullah, Abdul Ghani and Salim, Mohd Razman and Nagaokad, Hiroshi and Ayad, Hidenori (2004) Pilot scale microfiltration - coagulation for treatment of retention pond water. Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, 39 (8). pp. 2129-2142. ISSN 10934529

Saeed, Khitam Abdulhussein and Kassim, K. A. and Nur, Hadi and Mohd. Yunus, Nor Zurairahetty (2015) Strength of lime-cement stabilized tropical lateritic clay contaminated by heavy metals. KSCE Journal of Civil Engineering, 19 (4). pp. 887-892. ISSN 1226-7988

Saeedfar, S. and Abd. Wahab, A. K. (2015) An evaluation of the depth of similarity between linear and non-linear wave theories. In: The 3rd International Conference on Water Resources (ICWR-2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Saggaff, A. and Tahir, M. M. and Shek, P. N. (2013) Flexural behavior of steel reinforced brick beam utilizing interlocking brick system. In: Advanced Materials Research.

Saggaff, Anis (2007) Behaviour of composite partial strength connections with built - up steel sections. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saggaff, Anis and Alhajri, Talal and Md. Tahir, Mahmood and Alenezi, Khaled and Cher, Siang Tan and Sulaiman, Arizu and Muhammad Lawan, Mustapha and Mohamad Ragaee, Mohamad Ragaee (2014) Experimental and analytical study of various shear connectors used for cold-formed steel-ferrocement composite beam. In: International Conference on Advanced Material Engineering & Technology 2014, 5-6 Dec, 2014, Vietnam.

Saggaff, Anis and Md. Tahir, Mahmood and Sulaiman, Arizu and Shek, Poingian and Mirza, Jahangir (2015) Standardization of composite connections for trapezoid web profiled steel sections. Structural Engineering and Mechanics, 55 (4). pp. 765-784. ISSN 1225-4568

Saggaff, Anis and Md.Tahir, Mahmood and Sulaiman, Arizu and Poi, Ngian Shek and Cher, Siang Tan and Beng, Ahmad Hong Kueh (2011) Behaviour of composite beam with trapezoid web profiled steel section in sub-assemblage frame. Advanced Materials Research, 250-25 . pp. 1271-1274. ISSN 1022-6680

Sagun, Aysu and J. Anumba, Chimay and Bouchlaghem, Dino (2006) Coping with extreme events in the built environment: ICT for disaster mitigation and collaboration. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Sahak, Haslinda A. and Ali, M. Wijayanuddin and Kidam, Kamarizan and Haron, Saharudin and Hassim, Mimi H. and Othman, Norasikin and Ripin, Adnan and Zakaria, Zaki Yamani and Asri, Hairozie and Ahmad, Azman and Mat Ali, Nazruddin and Syed Hassan, Syed Abdul Hamid and Sulaiman, Zulkifly and Masri, Mohamad Fazli (2014) Survey on employers commitment towards OSH and its implementation in the metalworking industry. In: 3rd Scientific Conference on Occupational Safety and Health- Sci-Cosh 2014, 15-16 Oct, 2014, Johor Bahru, Malaysia.

Sahir, Zalilah Sharer and Sykes, John Malcolm (2011) Investigation of blister formed on coated mild steel using scanning Kelvin Probe. Jurnal Teknologi (Sciences and Engineering), 56 (1). pp. 139-154. ISSN 0127-9696

Sahlan, Shafishuhaza and Rusli, Mohd. Qamarul Ariffin and Leow, Pei Ling (2011) Proposed application of temperature sensor LM35 on a portable automatic controlled CPU cooling system. In: Progress in Process Tomography & Instrumentation System: Series 4/ 2011. Penerbit UTM Press, Skudai, Johor, pp. 129-135. ISBN 978-967-354-181-2

Sahraei, Mohammad Ali and Che Puan, Othman (2014) Determination of gap acceptance at priority intersections. In: 8th SEATUC Symposium, 4-5 March, 2014, Skudai, Johor.

Sahrani, Fathul Karim and Aziz, Madzlan and Ibrahim, Zaharah and Yahya, Adibah (2008) Surface analysis of marine sulphate-reducing bacteria exopolymers on steel during biocrrosion using x-ray photoelectron spectoscopy. Sains Malaysiana, 37 (2). pp. 131-135. ISSN 0126-6039

Sahul Hameed , Mohd. Anwar (2010) Performance of porous asphalt using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Said, Zulkifli (2007) Leachibility study of acid sulphate soil in Sg. Bekok catchment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Said, Mohamad Nor and Desa, Ghazali (1993) Digitising - Time Estimation Using A Linear Regression Model. Buletin Ukur, 4 (2). pp. 65-74. ISSN 0128-4274

Saidin, N. and Zen, D. I. M. and Ahmad, F. and Haris, H. and Ahmad, H. and Dimyati, K. and Harun, S. W. and Halder, A. and Paul, M. C. and Pal, M. and Bhadra, S. K. (2016) Q-switched 2 μm thulium bismuth co-doped fiber laser with multi-walled carbon nanotubes saturable absorber. Optics and Laser Technology, 83 . pp. 89-93. ISSN 0030-3992

Saili, Roziah Rohayah (2014) Establishing an ergonomics program in hard disc industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saim, A. Aziz and Anderson, D (1999) Direct design to horizontal sway, limitation for unbraced steel frames. Jurnal Kejuruteraan Awam, 11 (1). pp. 108-121. ISSN 0128-0147

Sajjadi, Seyed Mahdi (2015) Multivariate optimization of highway alignment using multi-criteria evaluation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sajoudi, Masoud Navazandeh (2010) Evaluation of construction equipment acquisition methods in Malayisan construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sakti, M. R. P. and Syahid, A. and Tareq, M. A. and Mohd. Mahdzir, A. (2016) Shari’ah issues, challenges, and prospects for Islamic derivatives: a qualitative study. Qualitative Research in Financial Markets, 8 (2). pp. 168-190. ISSN 1755-4179

Saktioto, Toto and Ali, Jalil (2012) Non linear optic in fiber bragg grating. In: Optical Fiber Technology. Springer, pp. 83-101. ISBN 978-3-642-31496-4

Salahi, Arsalan and Niroumand, Hamed and Kassim, Khairul Anuar (2015) Evaluation of stone columns versus liquefaction phenomenon. Scientific World Journal, 20 . pp. 739-759. ISSN 2356-6140

Salahuddin, Siti Nur Hafizeanie (2010) Factors influence construction time performance for IBS in Malaysia Construction Industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salamon, Hussin and Ebrahimi, Mansoureh and Yusoff, Kamaruzaman (2015) Speculation: the Islamic perspective; a study on Al-Maisir (gambling). Mediterranean Journal of Social Sciences, 6 (1S1). pp. 371-378. ISSN 2039-9340

Saleh, Abdul Latif and Aliabadi, MH (1998) Crack growth analysis in reinforced concrete using BEM. Journal of Engineering Mechanics, 124 (9). pp. 949-958. ISSN 0733-9399

Saleh, Abd . Latif (1997) An introduction of boundary element method to the analysis of crack propagat ion in concrete. Jurnal Kejuruteraan Awam, 10 (2). pp. 44-62. ISSN 0128-0147

Saleh, Abd. Latif and Abu Bakar, Suhaimi and Mohamed, Zainai and Khin, Maung Zaw (2006) Ultimate strength prediction of DRM timber beams by plastic approach: Experimental results and discussions. In: 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006, Kuala Lumpur, Malaysia.

Saleh, Abd. Latif and Mohd. Sam, Abdul Rahman and Zakaria, Rozana and Mustaffar, Mushairry and Oritola, Sikiru Folahan (2015) Strength characteristics of iron ore tailing concrete. In: 9th Asia Pacific Structural Engineering and Construction Conference & 8th Asean Civil Engineering Conference (APSEC-ACEC 2015), 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Saleh, AliReza Tavakolpour and Mailah, Musa (2012) Control of resonance phenomenon in flexible structures via active support. Journal Of Sound And Vibration, 331 (15). pp. 3451-3465. ISSN 0022-460X

Saleh, Norharyati (2014) Performance of cement grout incorporating ceramic waste as filler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saleh, Siti Syahirah and Abas, Khairul Hamimah (2012) Smart guide of ultrasonic parking system (SGUPS). In: Process Tomography & Instrumentation -Series 10. Penerbit UTM, Skudai, Johor, pp. 105-113. ISBN 978-967-354-189-8

Saleh, Siti Syahirah and Mohamed Zainudi, Mohd. Shukri and Mohd. Nor, Azri Asyraf and Abas, Khairul Hamimah (2012) Smart guide of ultrasonic parking system (SGUPS)- prototype. In: Mechatronics, Robotics, Instrumentation and Control Exhibition Day 2012 - Series 1. Wiley, pp. 181-189. ISBN 978-1-1180-2549-1

Salih, Asmaa and Kassim, Khairul Anuar (2012) Effective shear strength parameters of remoulded residual soil. Electronic Journal of Geotechnical Engineering, 17 C . pp. 243-253. ISSN 1089-3032

Salih, Asmaa Gheyath (2010) Effective shear strength parameters of remoulded residual soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salim, Idayani (2007) The influence of concrete strengths on the behaviour of external beam-column joints. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salim, Mohd. Razman and Ab. Wahid, Zularisam and Ismail, Ahmad Fauzi (2008) Effects of membrane cleaning techniques on NOM fouling and flux recovery. In: Advances in Water and Wastewater Treatment Technologies. Penerbit UTM , Johor, p. 42. ISBN 978-983-52-0580-4

Salim, Mohd. Razman and Aris, Azmi (2007) The performance of membrane bioreactor treating high temperature wastewater. In: National Seminar on Civil Engineering Research (SEPKA 2007), 2007, Good Hope Hotel, Skudai.

Salim, Mohd. Razman and Aris, Azmi and