Items where Division is "Chemical Engineering" and Year is 2016

Article

Abdul Wahab, Mohd. Khairul Hakimi and Jonet, Mohd. Anuar and Md. Illias, Rosli (2016) Thermostability enhancement of xylanase aspergillus fumigatus rt-1. Journal of Molecular Catalysis B: Enzymatic, 134 . pp. 154-163. ISSN 1381-1177

Emami, Sina Davazdah and Sulaiman, Siti Zubaidah and Md. Kasmani, Rafiziana and Hamid, Mahar Diana and Che Hassan, Che Rosmani (2016) Effect of pipe configurations on flame propagation of hydrocarbons-air and hydrogen-air mixtures in a constant volume. Journal of Loss Prevention in the Process Industries, 39 . pp. 141-151. ISSN 0950-4230

Abbaszadeh, Sahar and Wan Alwi, Sharifah Rafidah and Webb, Colin and Ghasemi, Nahid and Muhamad, Ida Idayu (2016) Treatment of lead-contaminated water using activated carbon adsorbent from locally available papaya peel biowaste. Journal of Cleaner Production, 118 . pp. 210-222. ISSN 0959-6526

Abd Mutalib, M. and Othman, M. H. D. and Aziz, M. and A. Rahman, M. and Jaafar, J. and Ismail, A. F. and Mohamed, M. A. (2016) The influence of PEEK as a pore former on the microstructure of brush-painted LSCF cathodes. Journal of Solid State Electrochemistry, 20 (10). pp. 2895-2905. ISSN 1432-8488

Abdollahi, Y. and Zakaria, A. and Said, S. B. M. and Sabri, M. F. B. M. and Sairi, N. A. and Rezayi, M. and Abouzari Lotf, E. and Dorraj, M. and Islam, A. (2016) Modeling of photodegradation process to remove the higher concentration of environmental pollution. Desalination and Water Treatment, 57 (1). pp. 191-201. ISSN 1944-3994

Abdul Fatah, Nor Aiza and Triwahyono, Sugeng and Abdul Jalil, Aishah (2016) Effect of support on molybdenum oxide acidity for n-heptane isomerization. Jurnal Teknologi, 78 (8-3). pp. 19-23. ISSN 0127-9696

Abdul Ghani, Siti Waqina and Abu Bakar, Aznizam and Samsudin, S. A. (2016) Mechanical and physical properties of chitosan-compatibilized montmorillonite-filled tapioca starch nanocomposite films. Journal of Plastic Film and Sheeting, 32 (2). pp. 140-162. ISSN 8756-0879

Abdul Haq, R. H. and Wahab, M. S. and Wahid, M. U. (2016) Fused deposition modeling of PCL/HA/MMT biocompatible polymer nano-composites. Advanced Structured Materials, 61 . pp. 23-32. ISSN 1869-8433

Abdul Majid, F. A. and Teh, L. C. and Yap, L. F. and Poh, S. S. and Mashudin, M. and Abdul Gani, M. (2016) Pineapple is a super fruit, but how much can it be consumed? Acta Horticulturae, 1111 . pp. 203-212. ISSN 0567-7572

Abdul Majid, Zulkifli and Mohsin, Rahmat and Nasri, Noor Shawal (2016) Effect of bioethanol on engine performance and exhaust emissions of a diesel fuel engine. International Journal of Technology, 7 (6). pp. 972-980. ISSN 2086-9614

Abdul Wahab, Mohd Khairul Hakimi and Jonet, Mohd Anuar and Md. Illias, Rosli (2016) Thermostability enhancement of xylanase aspergillus fumigatus rt-1. Journal Of Molecular Catalysis B: Enzymatic, 134 . pp. 154-163. ISSN 1381-1177

Abdullah, F. I. and Chua, L. S. and Rahmat, Z. and Samad, A. A. and Wagiran, A. (2016) Plant genomic DNA extraction for selected herbs and sequencing their internal transcribed spacer regions amplified by specific primers. Natural Product Communications, 11 (10). pp. 1491-1496. ISSN 1934-578X

Abdullah, N. and Gohari, R. J. and Yusof, N. and Ismail, Ahmad Fauzi and Juhana, J. and Lau, W. J. and Matsuura, T. (2016) Polysulfone/hydrous ferric oxide ultrafiltration mixed matrix membrane: preparation, characterization and its adsorptive removal of lead (II) from aqueous solution. Chemical Engineering Journal, 289 . pp. 28-37. ISSN 1385-8947

Abdullah, N. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. and Aziz, A. A. (2016) Preparation and characterization of self-cleaning alumina hollow fiber membrane using the phase inversion and sintering technique. Ceramics International, 42 (10). pp. 12312-12322. ISSN 0272-8842

Abdullah, N. and Rahman, M. A. and Othman, M. H. D. and Ismail, A. F. and Jaafar, J. (2016) Preparation and characterization of dual layer thin layer lanthanum strontium cobalt ferrite /alumina hollow fiber membrane using dip-coating and brush-coating techniques. Sains Malaysiana, 45 (11). pp. 1715-1721. ISSN 0126-6039

Abidin, M. N. Z. and Goh, P. S. and Ismail, A. F. and Othman, M. H. D. and Hasbullah, H. and Said, N. and Kadir, S. H. S. A. and Kamal, F. and Abdullah, M. S. and Ng, B. C. (2016) Antifouling polyethersulfone hemodialysis membranes incorporated with poly (citric acid) polymerized multi-walled carbon nanotubes. Materials Science and Engineering C, 68 . pp. 540-550.

Abouzari lotf, E. and Jacob, M. V. and Ghassemi, H. and Ahmad, A. and Nasef, M. M. and Zakeri, M. and Mehdipour Ataei, S. (2016) Enhancement of fuel cell performance with less-water dependent composite membranes having polyoxometalate anchored nanofibrous interlayer. Journal of Power Sources, 326 . pp. 482-489. ISSN 0378-7753

Adam Ali, O. M. and Ahmad Zaini, M. A. and Mohammed Danlami, J. (2016) Oxidation stability of castor oil in solvent extraction. Jurnal Teknologi, 78 (6). pp. 239-244. ISSN 0127-9696

Aditya Kiran, S. and Lukka Thuyavan, Y. and Arthanareeswaran, Gangasalam and Matsuura, Takeshi and Ismail, Ahmad Fauzi (2016) Impact of graphene oxide embedded polyethersulfone membranes for the effective treatment of distillery effluent. Chemical Engineering Journal, 286 . pp. 528-537. ISSN 1385-8947

Aftab, A. and Ismail, A. R. and Khokhar, S. and Ibupoto, Z. H. (2016) Novel zinc oxide nanoparticles deposited acrylamide composite used for enhancing the performance of water-based drilling fluids at elevated temperature conditions. Journal Of Petroleum Science And Engineering, 146 . pp. 1142-1157. ISSN 0920-4105

Ahmad, A. and Khatoon, A. and Mohd-Setapar, S. H. and Kumar, R. and Rafatullah, M. (2016) Chemically oxidized pineapple fruit peel for the biosorption of heavy metals from aqueous solutions. Desalination and Water Treatment, 57 (14). pp. 6432-6442. ISSN 1944-3994

Ahmad, S. I. and Hashim, H. and Hassim, M. H. (2016) A graphical method for assessing inherent safety during research and development phase of process design. Journal of Loss Prevention in the Process Industries, 42 . pp. 59-69. ISSN 0950-4230

Akhtar, J. and Imran, M. and Zahoor, M. K. and Amin, N. S. (2016) Granular activated carbon assisted ozonation of cephalexin antibiotic. Journal of the Chemical Society of Pakistan, 38 (6). pp. 1056-1063. ISSN 0253-5106

Ali, Esfandiari Bayat and Rajaei, Kourosh and Junin, Radzuan (2016) Assessing the effects of nanoparticle type and concentration on the stability of CO2 foams and the performance in enhanced oil recovery. Colloids and Surface A: Physicochemical and Engineering Aspects, 511 . pp. 222-231. ISSN 0927-7757

Ali, Mohamed Abbas and Mesran, Hadi and Abd. Latip, R. and Othman, Nor Hidayu and Nik Mahmood, Nik Azmi (2016) Effect of microwave heating with different exposure times on the degradation of corn oil. International Food Research Journal, 23 (2). pp. 842-848. ISSN 1985-4668

Ali Sidahmed, Heyam Mohamed and Mohd. Hashim, Najihah and Mohan, Syam Morali and Abdelwahab, Siddig Ibrahim and Taha, Manal Mohamed Elhassan and Dehghan, Firouzeh and Yahayu, Maizatulakmal Akmal and Cheng, Gwendoline Lian Ee and Loke, Mun Fai and Vadivelu, Jamuna (2016) Evidence of the gastroprotective and anti-helicobacter pylori activities of β-mangostin isolated from Cratoxylum arborescens (Vahl) blume. Drug Design, Development and Therapy, 10 . pp. 297-313. ISSN 1177-8881

Aliyu Bello, A. and Ahmad, Arshad and Ripin, Adnan and Oladokun, Olagoke (2016) Numerical estimation of moisture content in spray dried juice powder. Jurnal Teknologi, 78 (8-3). pp. 65-70. ISSN 0127-9696

Almaki, Javad Hamzehalipour and Nasiri, Rozita and Idris, Ani and Abdul Majid, Fadzilah Adibah and Salouti, Mojtaba and Wong, Tet Soon and Dabagh, Shadab and Marvibaigi, Mohsen and Amini, Neda (2016) Synthesis, characterization and in vitro evaluation of exquisite targeting SPIONs-PEG-HER in HER2+ human breast cancer cells. Nanotechnology, 27 (10). ISSN 0957-4484

Almasi, D. and Sadeghi, M. and Lau, W. J. and Roozbahani, F. and Iqbal, N. (2016) Functionally graded polymeric materials: a brif review of current fabrication methods and introduction of a novel fabrication method. Materials Science and Engineering C, 64 . pp. 102-107. ISSN 0928-4931

Altaee, A. and Ismail, A. F. and Sharif, A. and Zaragoza, G. (2016) Dual stage PRO process: impact of the membrane materials of the process performance. Desalination and Water Treatment, 57 (14). pp. 6172-6183. ISSN 1944-3994

Altaee, A. and Ismail, A. F. and Sharif, A. and Zaragoza, G. and Carvalho, P. C. (2016) Two-stage FO-BWRO/NF treatment of saline waters. Desalination and Water Treatment, 57 (11). pp. 4842-4852. ISSN 1944-3994

Arjmandi, Reza and Hassan, Azman and Mohamad Haafiz, Mohamad Kassim and Zakaria, Zainoha and Islam, Md. Saiful (2016) Effect of hydrolysed cellulose nanowhiskers on properties of montmorillonite/polylactic acid nanocomposites. International Journal of Biological Macromolecules, 82 . pp. 998-1010. ISSN 0141-8130

Arjmandi, Reza and Hassan, Azman and Mohamad Kassim, Mohamad Haafiz and Zakaria, Zainoha (2016) Biodegradability and thermal properties of hybrid montmorillonite/microcrystalline cellulose filled polylactic acid composites: effect of filler ratio. Polymers and Polymer Composites, 24 (9). pp. 741-746. ISSN 0967-3911

Asli, Umi Aisah and Nwaha, Isah and Hamid, Hazirah and Zakaria, Zainul Akmar and Sadikin, Aziatul Niza and Kamaruddin, Mohd. Johari (2016) A kinetic study of enzymatic hydrolysis of oil palm biomass for fermentable sugar using polyethylene glycol (PEG) immobilized cellulase. Jurnal Teknologi, 78 (8-3). pp. 51-57. ISSN 0127-9696

Atta, M. and Bukhari, A. and Idris, A. (2016) Enhanced lipid selective extraction from Chlorella vulgaris without cell sacrifice. Algal Research, 20 . pp. 7-15. ISSN 2211-9264

Azahar, W. N. A. W. and Jaya, R. P. and Hainin, M. R. and Bujang, M. and Ngadi, N. (2016) Chemical modification of waste cooking oil to improve the physical and rheological properties of asphalt binder. Construction and Building Materials, 126 . pp. 218-226. ISSN 0950-0618

Aziz, Z. A. A. and Mohd. Ali, S. A. and Ahmad, A. and Mohd. Setapar, S. H. (2016) Application of herbal extract and its medicinal value. Der Pharmacia Lettre, 8 (9). pp. 161-167.

Azman, Nadia Farhana and Abdeshahian, Peyman and Kadier, Abudukeremu and Nasser Al-Shorgani, Najeeb Kaid Nasser and Salih, Noura K.M. and Lananan, Izzati and Abdul Hamid, Aidil and Kalil, Mohd. Sahaid (2016) Biohydrogen production from de-oiled rice bran as sustainable feedstock in fermentative process. International Journal of Hydrogen Energy, 41 (1). pp. 145-156. ISSN 0360-3199

Azmin, S. N. H. M. and Manan, Z. A. and Alwi, S. R. W. and Chua, L. S. and Mustaffa, A. A. and Yunus, N. A. (2016) Herbal processing and extraction technologies. Separation and Purification Reviews, 45 (4). pp. 305-320. ISSN 1542-2119

Baig, U. and Gondal, M. A. and Alam, M. F. and Wani, W. A. and Younus, H. (2016) Pharmacological evaluation of poly(3-methylthiophene) and its titanium(IV)phosphate nanocomposite: DNA interaction, molecular docking, and cytotoxic activity. Journal of Photochemistry and Photobiology B: Biology, 164 . pp. 244-255. ISSN 1011-1344

Bakar, A. H. B. A. and Koay, Y. S. and Ching, Y. C. and Abdullah, L. C. and Choong, T. S. Y. and Alkhatib, M. and Mobarekeh, M. N. and Zahri, N. A. M. (2016) Removal of fluoride using quaternized palm kernel shell as adsorbents: equilibrium isotherms and kinetics studies. BioResources, 11 (2). pp. 4485-4511. ISSN 2214-7861

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2016) Selection of minimum temperature difference (dTmin) for heat exchanger network synthesis based on trade-off plot. Applied Energy, 162 . pp. 1259-1271. ISSN 0306-2619

Balaji, A. and Jaganathan, S. K. and Ismail, A. F. and Rajasekar, R. (2016) Fabrication and hemocompatibility assessment of novel polyurethane-based bio-nanofibrous dressing loaded with honey and Carica papaya extract for the management of burn injuries. International Journal of Nanomedicine, 11 . pp. 4339-4355. ISSN 1176-9114

Bayat, A. E. and Rajaei, K. and Junin, R. (2016) Assessing the effects of nanoparticle type and concentration on the stability of CO2 foams and the performance in enhanced oil recovery. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 511 . pp. 222-231. ISSN 0927-7757

Bhatti, I. and Bhutto, A. W. and Qureshi, K. and Kamarudin, K. S. N. and Bazmi, A. A. and Ahmad, F. (2016) Hydrodynamics study of the modified rotating disc contactor for CO2 absorption from natural gas using emulsion liquid membrane. Chemical Engineering Research and Design, 111 . pp. 465-478. ISSN 0263-8762

Bhatti, I. and Qureshi, K. and Kamarudin, K. S. N. and Bazmi, A. A. and Bhutto, A. W. and Ahmad, F. and Lee, M. (2016) Innovative method to prepare a stable emulsion liquid membrane for high CO2 absorption and its performance evaluation for a natural gas feed in a rotating disk contactor. Journal of Natural Gas Science and Engineering, 34 . pp. 716-732. ISSN 1875-5100

Bidsorkhi, H. C. and Riazi, H. and Emadzadeh, D. and Ghanbari, M. and Matsuura, T. and Lau, W. J. and Ismail, A. F. (2016) Preparation and characterization of a novel highly hydrophilic and antifouling polysulfone/nanoporous TiO2 nanocomposite membrane. Nanotechnology, 27 (41). ISSN 0957-4484

Bolong, N. and Saad, I. and Makinda, J. and Yaser, A. Z. and Abdullah, M. H. and Ismail, A. F. (2016) Influence of oil palm empty fruit bunch (OPEFB) agro-waste properties as filtration medium to improve urban stormwater. Jurnal Teknologi, 78 (8). pp. 39-46. ISSN 0127-9696

Borhani, T. N. G. and Afkhamipour, M. and Azarpour, A. and Akbari, V. and Emadi, S. H. and Manan, Z. A. (2016) Modeling study on CO2 and H2S simultaneous removal using MDEA solution. Journal of Industrial and Engineering Chemistry, 34 . pp. 344-355. ISSN 1226-086X

Borhani, T. N. G. and Saniedanesh, M. and Bagheri, M. and Lim, J. S. (2016) QSPR prediction of the hydroxyl radical rate constant of water contaminants. Water Research, 98 . pp. 344-353. ISSN 0043-1354

Boumehira, A .Z. and Malek, R. A. and Othman, Mohd. Nor and Ware, I. and Ramli, S. and Malek, K. and Hacene, H. and El-Enshasy, H. A. (2016) Bioprocess development for β-and γ-rubromycin production: a human telomerase inhibitors, by Streptomyces sp. ADR1. Journal of Scientific and Industrial Research, 75 (10). pp. 609-614. ISSN 0022-4456

Chaturvedi, N. D. and Manan, Z. A. and Wan Alwi, S. R. and Bandyopadhyay, S. (2016) Effect of multiple water resources in a flexible-schedule batch water network. Journal of Cleaner Production, 125 . pp. 245-252. ISSN 0959-6526

Chaturvedi, Nitin Dutt and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Bandyopadhyay, Santanu (2016) Maximising heat recovery in batch processes via product streams storage and shifting. Journal of Cleaner Production, 112 . pp. 2802-2812. ISSN 0959-6526

Che Man, Rohaida and Ismail, Ahmad Fauzi and Mohd. Fuzi, Siti Fatimah Zaharah and Ghazali, Nazlee Faisal and Md. Illias, Rosli (2016) Effects of culture conditions of immobilized recombinant Escherichia coli on cyclodextrin glucanotransferase (CGTase) excretion and cell stability. Process Biochemistry, 51 (4). pp. 474-483. ISSN 1359-5113

Che Othman, Faten Ermala and Yusof, Norhaniza and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abdullah, Norfadhilatuladha and Hasbullah, Hasrinah (2016) Adsorption of cadmium (II) ions by polyacrylonitrile-based activated carbon nanofibers/magnesium oxide as its adsorbents. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1467-1473.

Chee, Lee Pheng and Wan Alwi, Sharifah Rafidah and Lim, Jeng Shiun (2016) Production decision support system for batch processes. Journal of Advanced Research in Applied Sciences and Engineering Technology, 5 (1). pp. 7-21. ISSN 2462-1943

Cheng, Shu Ian and Stuckey, David C. (2016) Protein separation mechanisms in surfactant precipitation systems. Separation Science and Technology (Philadelphia), 51 (1). pp. 181-191. ISSN 0149-6395

Cheu, S. C. and Kong, H. and Song, S. T. and Johari, K. and Saman, N. and Che Yunus, M. A. and Mat, H. (2016) Separation of dissolved oil from aqueous solution by sorption onto acetylated lignocellulosic biomass - equilibrium, kinetics and mechanism studies. Journal of Environmental Chemical Engineering, 4 (1). pp. 864-881. ISSN 2213-3437

Chin, G. S. and Todo, H. and Kadhum, W. R. and Hamid, M. A. and Sugibayashi, K. (2016) In vitro permeation and skin retention of a-mangostin proniosome. Chemical and Pharmaceutical Bulletin, 64 (12). pp. 1666-1673. ISSN 0009-2363

Chin, Seng Lee and Mohd. Nor, Shadiah Husna and Al-Shanini, Ali and Ahmad, Arshad (2016) Operational risk analysis for undesired polymerization in overhead condenser of butadiene column. Jurnal Teknologi, 78 (8-3). pp. 43-50. ISSN 0127-9696

Chong, C. Y. and Lai, G. S. and Lau, W. J. and Yusof, N. and Goh, P. S. and Emadzadeh, D. (2016) Impacts of hydrophilic nanofillers on separation performance of thin film nanocomposite reverse osmosis membrane. Jurnal Teknologi, 78 (12). pp. 63-68. ISSN 0127-9696

Chow, Ming Fai and Yusop, Zulkifli and Teo, Fang Yenn (2016) Evaluation of stormwater runoff quality during monsoon and inter-monsoon seasons at tropical urban catchments. International Journal of River Basin Management, 14 (1). pp. 75-82. ISSN 1571-5124

Chua, L. S. (2016) Untargeted MS-based small metabolite identification from the plant leaves and stems of Impatiens balsamina. Plant Physiology and Biochemistry, 106 . pp. 16-22. ISSN 0981-9428

Chua, L. S. and Latiff, N. A. and Mohamad, M. (2016) Reflux extraction and cleanup process by column chromatography for high yield of andrographolide enriched extract. Journal of Applied Research on Medicinal and Aromatic Plants, 3 (2). pp. 64-70. ISSN 2214-7861

Chua, Lee Suan and Alias, Norma and Januari, Ristian and Mustaffa, Maizatul Nadirah and Ali, Akhtar and Ahmad Kamal, Mohamad Hidayad and Hayat, Imran (2016) Mathematical modeling for contour identification based on medicinal leaves and GIS images. Journal Teknologi, 78 (12-2). pp. 49-55. ISSN 0127-9696

Chun, W. K. and Sean, G. P. and Ismail, A. F. (2016) Effect of pmma-mwnts loading on Co2 separation performance of thin film nanocomposite membrane. Jurnal Teknologi, 78 (12). pp. 39-45. ISSN 0127-9696

Chuo, S. C. and Mohd. Setapar, S. H. and Ahmad, A. and Lokhat, D. (2016) New generation separation and identification methods for erythromycin. Der Pharmacia Lettre, 8 (19). pp. 215-222. ISSN 0975-5071

Dadashzadeh, Mohammad and Ahmad, Arshad and Khan, Faisal (2016) Dispersion modelling and analysis of hydrogen fuel gas released in an enclosed area: A CFD-based approach. Fuel, 184 . pp. 192-201. ISSN 0016-2361

Dasht Arzhandi, Masood Rezaei and Ismail, Ahmad Fauzi and Goh, Pei Sean and Wan Azelee, Ihsan and Abbasgholipourghadim, Mohammad and Ghani, Ur Rehman and Matsuura, T. (2016) Zeolite zsm5-filled pvdf hollow fiber mixed matrix membranes for efficient carbon dioxide removal via membrane contactor. Industrial and Engineering Chemistry Research, 55 (49). pp. 12632-12643. ISSN 0888-5885

Dashti, M. G. and Abdeshahian, P. (2016) Batch culture and repeated-batch culture of Cunninghamella bainieri 2A1 for lipid production as a comparative study. Saudi Journal of Biological Sciences, 23 (2). pp. 172-180. ISSN 1319-562X

Daud, S. and Ahmad Noorden, A. F. (2016) Fibre bragg grating sensor system for temperature application. Jurnal Teknologi, 78 (3). pp. 39-42. ISSN 0127-9696

De Silva, R. T. and Soheilmoghaddam, M. and Goh, K. L. and Wahit, M. U. and Bee, S. A. H. and Chai, S. P. and Pasbakhsh, P. (2016) Influence of the processing methods on the properties of poly(lactic acid)/halloysite nanocomposites. Polymer Composites, 37 (3). pp. 861-869. ISSN 0272-8397

Delavari, Saeed and Saidina Amin, Nor Aishah (2016) Photocatalytic conversion of CO2 and CH4 over immobilized titania nanoparticles coated on mesh: optimization and kinetic study. Applied Energy, 162 . pp. 1171-1185. ISSN 0306-2619

De’nan, Fatimah and Hasan, Hazwani and Osman, Mohd Hanim and Sa'ad, Sariffuddin (2016) Torsional behavior of triangular web profile (triwp) steel section by experimental study. FRONTIERS OF STRUCTURAL AND CIVIL ENGINEERING . pp. 1-11. ISSN 20952430

Dzinun, Hazlini and Othman, Mohd. Hafiz Dzarfan and Ismail, Ahmad Fauzi and Puteh, Mohd. Hafiz and A. Rahman, Mukhlis and Jaafar, Juhana (2016) Photocatalytic degradation of nonylphenol using co-extruded dual-layer hollow fibre membranes incorporated with a different ratio of TiO2/PVDF. Reactive and Functional Polymers, 99 . pp. 80-87. ISSN 1381-5148

Elbatran, A. H. A. and Yaakob, O. B. and Ahmed, Y. M. and Abdullah, F. B. (2016) Augmented diffuser for horizontal axis marine current turbine. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 235-245. ISSN 2088-8694

Emadzadeh, D. and Ghanbari, M. and Lau, W. J. and Rahbari-Sisakht, M. and Matsuura, T. and Ismail, A. F. and Kruczek, B. (2016) Solvothermal synthesis of nanoporous TiO2: the impact on thin-film composite membranes for engineered osmosis application. Nanotechnology, 27 (34). ISSN 0957-4484

Emami, Sina Davazdah and Kasmani, Rafiziana Md. and Hamid, Mahar Diana and Cha Hassan, Che Rosmani and Sulaiman, Siti Zubaidah (2016) Effect of inhibitor gases on hydrogen flame propagation in a confined tee pipe (Part I). Fuel, 165 . pp. 50-58. ISSN 0016-2361

Eteng, A. A. and Abdul Rahim, S. K. and Leow, C. Y. (2016) Numerical study on the distance-dependence of optimal loop size-ratios for inductive coupling links. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3117-3121. ISSN 1819-6608

Etesami, M. and Chandran, N. S. N. M. S. and Hussin, M. H. and Ripin, A. and Adnan, R. and Sujari, A. N. A. and Mohamed, N. (2016) Electrooxidation of nitrite ions on gold/polyaniline/carbon paste electrode. International Journal of Electrochemical Science, 11 (10). pp. 8332-8345. ISSN 1452-3981

Fallahiarezoudar, E. and Ahmadipourroudposht, M. and Idris, A. and Yusof, N. M. and Marvibaigi, M. and Irfan, M. (2016) Characterization of maghemite (γ-Fe2O3)-loaded poly-l-lactic acid/thermoplastic polyurethane electrospun mats for soft tissue engineering. Journal of Materials Science, 51 (18). pp. 8361-8381. ISSN 0022-2461

Fan, Yee Van and Lee, Chew Tin and Leow, Chee Woh and Chua, Lee Suan and Sarmidi, Mohamad Roji (2016) Physico-chemical and biological changes during co-composting of model kitchen waste, rice bran and dried leaves with different microbial inoculants. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1447-1457. ISSN 1394-2506

Farad, Sagala and Mugisa, John and Alahdal, Hussein A. and Idris, Ahmad Kamal and Kisiki, Nsamba Hussein and Kabenge, Isa (2016) Effect of wettability on oil recovery and breakthrough time for immiscible gas flooding. Petroleum Science and Technology, 34 (20). pp. 1705-1711. ISSN 1091-6466

Fatah, N. A. A and Triwahyono, S. and Jalil, A. A. and Ahmad, A. and Abdullah, T. A. T. (2016) N-Heptane isomerization over mesostructured silica nanoparticles (MSN): dissociative-adsorption of molecular hydrogen on Pt and Mo sites. Applied Catalysis A: General, 516 . pp. 135-143.

Firdaus, F. and Noor-e-Iram, Noor-e-Iram and Khan, M. S. and Baig, U. (2016) Facile synthesis, characterization and photocatalytic activity of band gap engineered cobalt selenide nanoparticles. Arabian Journal for Science and Engineering, 41 (6). pp. 2377-2384. ISSN 1319-8025

Fosi, Mohamoud Kofal and Mustafa, Azeman and Ismail, Ahmad Fauzi (2016) Development of novel surface modified poly (vinylidene fluoride ‐ co ‐ hexafluoropropylene) (PVDF ‐ HFP) membrane contactor for CO2 absorption. Journal of Scientific Research and Development, 3 (3). pp. 75-81. ISSN 1115-7569

Gabdo, H. T. and Ramli, A. T. and Saleh, M. A. and Garba, N. N. and Sanusi, M. (2016) Natural radioactivity measurements in Pahang State, Malaysia. Isotopes In Environmental And Health Studies, 52 (3). pp. 298-308. ISSN 1025-6016

Ganjali Dashti, M. and Abdeshahian, P. and Sudesh, K. and Phua, K. K. (2016) Optimization of Salmonella Typhi biofilm assay on polypropylene microtiter plates using response surface methodology. Biofouling, 32 (4). pp. 477-487. ISSN 0892-7014

Garba, Abdurrahman and Basri, Hatijah and Nasri, Noor Shawal and Ismail, Razali (2016) Synthesis and characterization of porous carbon from biomass using KOH and K2CO3 chemical activation. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1613-1617. ISSN 1819-6608

Garba, N. N. and Ramli, A. T. and Saleh, M. A. and Sanusi, M. S. and Gabdo, H. T. and Aliyu, A. S. (2016) The potential health hazards of chronic exposure to low-dose natural radioactivity in Terengganu, Malaysia. Environmental Earth Sciences, 75 (5). pp. 1-12. ISSN 1866-6280

Ghaee, A. and Shariaty-Niassar, M. and Barzin, J. and Matsuura, T. and Fauzi Ismail, A. (2016) Preparation of chitosan/cellulose acetate composite nanofiltration membrane for wastewater treatment. Desalination and Water Treatment, 57 (31). pp. 14453-14460. ISSN 1944-3994

Ghalia, Mustafa Abu and Inuwa, Ibrahim and Hassan, Azman and Dahman, Yaser (2016) Viscoelastic behavior and mechanical properties of polypropylene/nano-calcium carbonate nanocomposites modified by a coupling agent. Macromolecular Research . pp. 1-11. ISSN 1598-5032 (In Press)

Ghasemi, Mostafa and Wan Daud, Wan Ramli and Alam, Javed and Ilbeygi, Hamid and Sedighi, Mehdi and Ismail, Ahmad Fauzi and Yazdi, Mohammad H. and Aljlil, Saad A. (2016) Treatment of two different water resources in desalination and microbial fuel cell processes by poly sulfone/sulfonated poly ether ether ketone hybrid membrane. Energy, 96 . pp. 303-313. ISSN 0360-5442

Ghosh, S. and Mishra, P. and Mohamad, S. N. H. and de Santos, R. M. and Iglesias, B. D. and Elorza, P. B. (2016) Discrimination of peanuts from bulk cereals and nuts by near infrared reflectance spectroscopy. Biosystems Engineering, 151 . pp. 178-186. ISSN 1537-5110

Goh, P. S. and Matsuura, T. and Ismail, A. F. and Hilal, N. (2016) Recent trends in membranes and membrane processes for desalination. Desalination, 391 . pp. 43-60. ISSN 0011-9164

Hafizan, A. M. and Wan Alwi, S. R. and Manan, Z. A. and Klemes, J. J. (2016) Optimal heat exchanger network synthesis with operability and safety considerations. Clean Technologies and Environmental Policy, 18 (8). pp. 2381-2400. ISSN 1618-954X

Hafizan, C. and Noor, Z. Z. and Abba, A. H. and Hussein, N. (2016) An alternative aggregation method for a life cycle impact assessment using an analytical hierarchy process. Journal of Cleaner Production, 112 . pp. 3244-3255. ISSN 0959-6526

Hafizan, Che and Zainon Noor, Zainura and Abba, Ahmad Halilu and Hussein, Norelyza (2016) An alternative aggregation method for a life cycle impact assessment using an analytical hierarchy process. Journal of Cleaner Production, 112 . pp. 3244-3255.

Halim, N. A. A. and Ngadi, N. and Ibrahim, M. N. M. and Ansari, S. M. (2016) Monomeric structure characterization of different sources biomass lignin. Key Engineering Materials, 700 . pp. 42-49. ISSN 1013-9826

Hamdzah, M. and Ujang, Z. and Nasef, M. M. and Abdullah, N. and Dahalan, F. A. (2016) Removal of Ni(II), Zn(II) and Pb(II) from aqueous solutions using cation-exchange resin in fixed-bed column. Desalination and Water Treatment, 57 (40). pp. 18770-18781. ISSN 1944-3994

Hamza, U. D. and Nasri, N. S. and Amin, N. A. S. and Mohammed, J. and Zain, H. M. (2016) Microwave assisted K2CO3 palm shell activated carbon as sorbent for CO2 adsorption application. Jurnal Teknologi, 78 (8-3). pp. 127-136. ISSN 0127-9696

Hamza, Usman D. and Nasri, Noor S. and S. Amin, Nor Aishah and Mohammed, Jibril and M. Zain, Husna (2016) Characteristics of oil palm shell biochar and activated carbon prepared at different carbonization times. Desalination and Water Treatment, 57 (17). pp. 7999-8006. ISSN 1944-3994

Hamzehalipour Almaki, J. and Nasiri, R. and Tet Soon, W. and Huyop, F. Z. (2016) Identification of novel bacterial species capable of degrading dalapon using 16S rRNA sequencing. Jurnal Teknologi, 78 (6). pp. 77-82. ISSN 0127-9696

Hanifah, Mohamad Fahrul Radzi and Jaafar, Juhana and Aziz, Madzlan and Ismail, Ahmad Fauzi and Ahmad Thirmizir, Mohd. Zharif and Othman, Mohd. Hafiz Dzarfan and A. Rahman, Mukhlis and Yusof, Norhaniza (2016) Electrocatalytic study of efficient synthesized graphene nanosheets incorporated with pt nanoparticles for methanol oxidation reaction. Electroanalysis, 28 (1). pp. 222-226. ISSN 1040-0397

Harun, Z. and Yunos, M. Z. and Yusof, K. N. and Shohur, M. F. and Lau, W. J. and Salleh, W. N. W. (2016) Optimization and characterization of polysulfone membranes made of zinc oxide, polyethylene glycol and eugenol as additives. Journal of Engineering Science and Technology, 11 (7). pp. 1001-1015. ISSN 1823-4690

Hassan, N. and Idris, A. (2016) Simultaneous saccharification and fermentation of lactic acid from empty fruit bunch at high solids loading. BioResources, 11 (2). pp. 3799-3812. ISSN 1930-2126

Hassim, Mimi Haryani (2016) Comparison of methods for assessing occupational health hazards in chemical process development and design phase. Current Opinion in Chemical Engineering, 14 (2016). pp. 137-149. ISSN 2211-3398

Helmi Atta, Md. Nur and Mat, Shabudin and Perumal, Kannan (2016) Wind tunnel test of UTM sport complex. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 25 . pp. 19-30. ISSN 2289-7879

Hitam, C. N. C. and Jalil, A. A. and Triwahyono, S. and Ahmad, A. and Jaafar, N. F. and Salamun, N. and Fatah, N. A. A. and Teh, L. P. and Khusnun, N. F. and Ghazali, Z. (2016) Synergistic interactions of Cu and N on surface altered amorphous TiO2 nanoparticles for enhanced photocatalytic oxidative desulfurization of dibenzothiophene. RSC Advances, 6 (80). pp. 76259-76268. ISSN 2046-2069

Hoe, Then Kek and Sarmidi, Mohamad Roji and Syed Alwee, Sharifah Shahrul Rabiah and Zakaria, Zainul Akmar (2016) Recycling of oil palm empty fruit bunch as potential carrier for biofertilizer formulation. Jurnal Teknologi, 78 (2). pp. 165-170. ISSN 0127-9696

Hosseini, Soraya and Abdul Rashid, Suraya and Abbasi, Ali and Eghbali Babadi, Farahnaz and Abdullah, Luqman Chuah and Choong, Thomas Shean Yaw (2016) Effect of catalyst and substrate on growth characteristics of carbon nanofiber onto honeycomb monolith. Journal of the Taiwan Institute of Chemical Engineers, 59 . pp. 440-449. ISSN 1876-1070

Hubadillah, S. K. and Harun, Z. and Othman, M. H. D. and Ismail, A. F. and Salleh, W. N. W. and Basri, H. and Yunos, M. Z. and Gani, P. (2016) Preparation and characterization of low cost porous ceramic membrane support from kaolin using phase inversion/sintering technique for gas separation: effect of kaolin content and non-solvent coagulant bath. Chemical Engineering Research and Design, 112 . pp. 24-35. ISSN 0263-8762

Hubadillah, Siti Khadijah and Othman, Mohd. Hafiz Dzarfan and Harun, Zawati and Ismail, Ahmad Fauzi and Iwamoto, Yuji and Honda, Sawao and A. Rahman, Mukhlis and Jaafar, Juhana and Gani, Paran and Mohd. Sokri, Mohd. Nazri (2016) Effect of fabrication parameters on physical properties of metakaolin-based ceramic hollow fibre membrane (CHFM). Ceramics International, 42 (14). pp. 15547-15558. ISSN 0272-8842

Hun, Lee Ting and Wani, Waseem A. and Poh, Heng Yong and Baig, Umair and Tan, Eddie Ti Tjih and Nashiruddin, Noor Idayu and Ling, Yong Ee and Abdul Aziz, Ramlan (2016) Gel electrophoretic and liquid chromatographic methods for the identification and authentication of cave and house edible birds nests from common adulterants. Analytical Methods, 8 (3). pp. 526-536. ISSN 1759-9660

Husain, Abdul Rashid and Hadad, Yaser and Zainal Alam, Muhd. Nazrul Hisham (2016) Development of low-cost microcontroller-based interface for data acquisition and control of microbioreactor operation. Journal of Laboratory Automation, 21 (5). pp. 660-670. ISSN 2211-0682

Ibrahim, N. A. and Ahmad Zaini, M. A. (2016) Parametric investigation of fixed-tray, semi-continuous distillation column for ethanol separation from water. Jurnal Teknologi, 78 (11). pp. 85-92. ISSN 0127-9696

Idris, A. and Majidnia, Z. and Nor Kamarudin, K. S. B. (2016) Photocatalyst treatment for lead(II) using titanium oxide nanoparticles embedded in PVA-alginate beads. Desalination and Water Treatment, 57 (11). pp. 5035-5044. ISSN 1944-3994

Idris, Ani and Nasrudin, Md. Rahim and Ibrahim, Marini and Mohd., Zaini Ya'Cob and Hashim, Emi Fazlina and Akhtar, Junaid and Lai, Long Wee (2016) Study on composition, structural and property changes of oil palm frond biomass under different pretreatments. Cellulose Chemistry and Technology, 50 (9-10). pp. 951-959. ISSN 0576-9787

Idumah, C. I. and Hassan, A. (2016) Recently emerging trends in thermal conductivity of polymer nanocomposites. Reviews in Chemical Engineering, 32 (4). pp. 413-457. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Characterization and preparation of conductive exfoliated graphene nanoplatelets kenaf fibre hybrid polypropylene composites. Synthetic Metals, 212 . pp. 91-104. ISSN 0379-6779

Idumah, Christopher Igwe and Hassan, Azman (2016) Effect of exfoliated graphite nanoplatelets on thermal and heat deflection properties of kenaf polypropylene hybrid nanocomposites. Journal of Polymer Engineering, 36 (9). pp. 877-889. ISSN 0334-6447

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in eco-compliant, synergistic, and hybrid assembling of multifunctional polymeric bionanocomposites. Reviews in Chemical Engineering, 32 (3). pp. 305-361. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in flame retardancy of biofibers, biopolymers, biocomposites, and bionanocomposites. Reviews in Chemical Engineering, 32 (1). pp. 115-148. ISSN 0167-8299

Idumah, Christopher Igwe and Hassan, Azman (2016) Emerging trends in graphene carbon based polymer nanocomposites and applications. Reviews in Chemical Engineering, 32 (2). pp. 223-264. ISSN 0167-8299

Inuwa, I. M. and Arjmandi, R. and Ibrahim, A. N. and Haafiz, M. K. M. and Wong, S. L. and Majeed, K. and Hassan, A. (2016) Enhanced mechanical and thermal properties of hybrid graphene nanoplatelets/multiwall carbon nanotubes reinforced polyethylene terephthalate nanocomposites. Fibers and Polymers, 17 (10). pp. 1657-1666. ISSN 1229-9197

Irfan, M. and Idris, A. and Khairuddin, N. F. M. (2016) Removal of heavy metal ions from its low concentrated lake water via LiBr/PES hollow fiber membrane module system. Desalination and Water Treatment, 57 (43). pp. 20388-20400. ISSN 1944-3994

Irfan, M. and Idris, A. and Nasiri, R. and Almaki, J. H. (2016) Fabrication and evaluation of polymeric membranes for blood dialysis treatments using functionalized MWCNT based nanocomposite and sulphonated-PES. RSC Advances, 6 (103). pp. 101513-101525. ISSN 2046-2069

Isa, Khairuddin Md. and Abdullah, Tuan Amran Tuan and Ali, Umi Fazara Md. (2016) Hydrogen donor solvents in liquefaction of biomass: a review. Renewable and Sustainable Energy Reviews . ISSN 1364-0321 (In Press)

Ishak, S. A. and Hashim, H. and Ting, T. S. (2016) Eco innovation strategies for promoting cleaner cement manufacturing. Journal of Cleaner Production, 136 . pp. 133-149. ISSN 0959-6526

Ishak, Siti Aktar and Hashim, Haslenda and Ting, Tan Sie (2016) Eco innovation strategies for promoting cleaner cement manufacturing. Journal of Cleaner Production, 136 . pp. 133-149. ISSN 0959-6526

Islam, S. and Bidin, N. and Riaz, S. and Naseem, S. (2016) Structural and optical properties of surfactant assisted SiO2-TiO2 hybrid matrix for pH sensing: sol-gel approach. Jurnal Teknologi, 78 (3). pp. 211-215. ISSN 0127-9696

Ismaila, Aminu and Ahmad, Termizi Ramli and Md Kasmani, Rafiziana and Abubakar, S. Aliyu (2016) Current knowledge and research opportunities in nuclear fire safety: a technical overview on aircraft impact upon nuclear containment. Indian Journal Of Science And Technology, 9 (46). p. 107076. ISSN 09746846

Jaafar, N. R. and Littler, D. and Beddoe, T. and Rossjohn, J. and Md. Illias, R. and Mahadi, N. M. and Mackeen, M. M. and Murad, A. M. A. and Abu Bakar, F. D. (2016) Crystal structure of fuculose aldolase from the Antarctic psychrophilic yeast Glaciozyma antarctica PI12. Acta Crystallographica Section: F Structural Biology Communications, 72 (11). pp. 831-839. ISSN 2053-230X

Jaafar, Nardiah Rizwana and Littler, Dene and Beddoe, Travis and Rossjohn, Jamie and Md. Illias, Rosli and Mahadi, Nor Muhammad and Mackeen, Mukram Mohamed and Abdul Murad, Abdul Munir and Abu Bakar, Farah Diba (2016) Crystal structure of fuculose aldolase from the Antarctic psychrophilic yeast Glaciozyma antarctica PI12. Acta Crystallographica Section:F Structural Biology Communications, 72 (11). pp. 831-839. ISSN 2053-230X

Jamalludin, M. R. and Harun, Z. and Hubadillah, S. K. and Basri, H. and Ismail, A. F. and Othman, M. H. D. and Shohur, M. F. and Yunos, M. Z. (2016) Antifouling polysulfone membranes blended with green SiO2 from rice husk ash (RHA) for humic acid separation. Chemical Engineering Research and Design, 114 . pp. 268-279.

Johari, Khairiraihanna and Saman, Norasikin and Song, Shiow Tien and Cheu, Siew Chin and Kong, Helen and Mat, Hanapi (2016) Development of coconut pith chars towards high elemental mercury adsorption performance - effect of pyrolysis temperatures. Chemosphere, 156 . pp. 56-68. ISSN 0045-6535

Junoh, M. M. and Ani, F. N. (2016) A study on various design shape of commercial granular activated carbon for textile wastewater filteration. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 10836-10839. ISSN 1819-6608

Jusin, Jashiela Wani and Aziz, Madzlan and Sean, Goh Pei and Jaafar, Juhana (2016) Preparation and characterization of graphene-based magnetic hybrid nanocomposite. Malaysian Journal of Analytical Sciences, 20 (1). pp. 149-156. ISSN 1394-2506

Jusoh, Norela and Othman, Norasikin (2016) Stability of palm oil-based emulsion liquid membrane for succinic acid extraction from aqueous solution. Journal of Applied Membrane Science and Technology, 19 . pp. 1-17. ISSN 1823-366X

Jusoh, Norela and Othman, Norasikin and Nasruddin, Nur Alina (2016) Emulsion liquid membrane technology in organic acid purification. Malaysian Journal of Analytical Sciences, 20 (2). pp. 436-443. ISSN 1394-2506

Jusoh, Norela and Othman, Norasikin and Nasruddin, Nur Alina (2016) Emulsion liquid membrane technology in organic acid purification [Teknologi emulsi membran cecair dalam penulenan asid organik]. Malaysian Journal of Analytical Sciences, 20 (2). pp. 436-443. ISSN 1394-2506

Kamaruddin, Mohd Johari and Mohamad, Nurulsurusiah and Asli, Umi Aisah and Ahmad Zaini, Muhammad Abbas and Kidam, Kamarizan and Hassim, Mimi Haryani (2016) The effect of conventional and microwave heating techniques on transesterification of waste cooking oil to biodiesel. Jurnal Teknologi, 78:8?? (2016). pp. 95-100. ISSN 2180-3722

Kamarudin, N. H. N. and Jalil, A. A. and Triwahyono, S. and Timmiati, S. N. (2016) Microwave-assisted synthesis of mesoporous silica nanoparticles as a drug delivery vehicle. Malaysian Journal of Analytical Sciences, 20 (6). pp. 1382-1389. ISSN 1394-2506

Kang, Tee Zhao and Mohammad, Siti Hajar and Abd. Murad, Abdul Munir and Md. Illias, Rosli and Md. Jahim, Jamaliah (2016) Fermentative production of xylitol: a first trial on xylose bifurcation. Indian Journal of Science and Technology, 9 (21). ISSN 0974-6846

Khalil, M. A. and Ahmad, A. and Abdullah, T. A. T. and Al-Shanini, A. (2016) Failure analysis using functional model and Bayesian network. Chemical Product and Process Modeling, 11 (4). pp. 265-272. ISSN 2194-6159

Khalil, M. A. R. and Ahmad, A. and Abdullah, T. A. T. and Al Shatri, A. and Al Shanini, A. (2016) Multi-state analysis of process status using multilevel flow modelling and Bayesian network. Jurnal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Khalil, M. A. R. and Ahmad, A. and Abdullah, T. A. T. and Al-Shatri, A. and Al-Shanini, A. (2016) Multi State analysis of process status using multilevel flow modelling and Bayesian network. Jurnal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Khalil, Mohamed A. R. and Ahmad, Arshad and Tuan Abdullah, Tuan Amran and Ali Al-Shatri, Ali Hussein and Ali Al-Shanini, Ali Hasan (2016) Multi-state analysis functional models using Bayesian networks. Journal Teknologi, 78 (8-3). pp. 33-41. ISSN 0127-9696

Khani, Mojtaba and Saidina Amin, Nor Aishah and Hosseini, Seyed Nezamedin and Heidarrezaei, Mahshid (2016) Kinetics study of the photocatalytic inactivation of Escherichia coli. International Journal of Nano and Biomaterials, 6 (3-4). pp. 139-150. ISSN 1752-8933

Khusnun, N. F. and Jalil, A. A. and Triwahyono, S. and Jusoh, N. W. C. and Johari, A. and Kidam, K. (2016) Interaction between copper and carbon nanotubes triggers their mutual role in the enhanced photodegradation of: P -chloroaniline. Physical Chemistry Chemical Physics, 18 (17). pp. 12323-12331. ISSN 1463-9076

Kidam, K. and Sahak, H. A. and Hassim, M. H. and Shahlan, S. S. and Hurme, M. (2016) Inherently safer design review and their timing during chemical process development and design. Journal of Loss Prevention in the Process Industries, 42 . pp. 47-58. ISSN 0950-4230

Kofal, M. Fosi and Mustafa, A. and Ismail, Ahmad Fauzi and DashtArzhandi, M. Rezaei and Matsuura, T. (2016) PVDF/CaCO3 composite hollow fiber membrane for CO2 absorption in gas-liquid membrane contactor. Journal of Natural Gas Science and Engineering, 31 . pp. 428-436. ISSN 1875-5100

Krishnamurthy, P. H. and Yogarathinam, L. T. and Gangasalam, A. and Ismail, A. F. (2016) Influence of copper oxide nanomaterials in a poly(ether sulfone) membrane for improved humic acid and oil-water separation. Journal of Applied Polymer Science, 133 (36). ISSN 0021-8995

Krishnan, G. and Bidin, N. (2016) The effects of temperature on different laser transitions of neodymium orthovanadate crystal. Jurnal Teknologi, 78 (3). pp. 149-154. ISSN 0127-9696

Lai, G. S. and Lau, W. J. and Goh, P. S. and Ismail, A. F. and Yusof, N. and Tan, Y. H. (2016) Graphene oxide incorporated thin film nanocomposite nanofiltration membrane for enhanced salt removal performance. Desalination, 387 . pp. 14-24. ISSN 0011-9164

Lai, J. C. and Hassan, A. and Hasan, M. and Ani, F. N. and Tanjung, F. A. (2016) Heat distortion temperature and mechanical properties of agricultural wastes-reinforced phenolic composites. Journal of Polymer Engineering, 36 (6). pp. 641-647. ISSN 0334-6447

Lai, Jau Choy and Wan Abdul Rahman, Wan Aizan and Avérous, Luc and Lim, Teck Hock (2016) Study and characterisation of the post processing ageing of sago pith waste biocomposites. Sains Malaysiana, 45 (4). pp. 633-641. ISSN 0126-6039

Lai, L. W. and Idris, A. (2016) Comparison of steam-alkali-chemical and microwave-alkali pretreatment for enhancing the enzymatic saccharification of oil palm trunk. Renewable Energy, 99 . pp. 738-746. ISSN 0960-1481

Lee, C. T. and Klemes, J. J. and Hashim, H. and Ho, C. S. (2016) Mobilising the potential towards low-carbon emissions society in Asia. Clean Technologies and Environmental Policy, 18 (8). pp. 2337-2345. ISSN 1618-954X

Lee, Chew Tin and Hashim, Haslenda and Chin, Siong Ho and Klemes, Jiri Jaromir (2016) Low-carbon Asia: technical contributions to an ambitious goal for sustainability. Clean Technologies and Environmental Policy, 18 (8). pp. 2335-2336. ISSN 1618-954X

Lee, L. Z. and Ahmad Zaini, M. A. (2016) Metal chloride salts in the preparation of activated carbon and their hazardous outlook. Desalination and Water Treatment, 57 (34). pp. 16078-16085. ISSN 1944-3994

Lee, X. and Wahit, M. U. and Adrus, N. (2016) Biodegradable and temperature-responsive thermoset polyesters with renewable monomers. Journal of Applied Polymer Science, 133 (40). ISSN 0021-8995

Liew, W. H. and Hassim, M. H. and Ng, D. K. S. (2016) Systematic framework for sustainability assessment on chemical production pathway: basic engineering stage. Process Safety and Environmental Protection, 104 . pp. 161-177. ISSN 0957-5820

Liew, W.H. and Hassim, M.H. and Ng, D.K.S. (2016) Sustainability assessment framework for chemical production pathway: uncertainty analysis. Journal of Environmental Chemical Engineering, 4 (4). pp. 4878-4889. ISSN 2213-3437

Liu, W. H. and Kaliappan, K. and Alwi, S. R. W. and Lim, J. S. and Ho, W. S. (2016) power pinch analysis supply side management: strategy on purchasing and selling of electricity. Clean Technologies and Environmental Policy, 18 (8). pp. 2401-2418. ISSN 1618-954X

M. Mokhtar, Mutahharah and Taib, M. Rozainee and Hassim, Mimi H. (2016) Decision analysis of multi-pollutant control strategy for coal-fired power plant in Malaysia. Clean Technologies and Environmental Policy, 18 (5). pp. 1361-1367. ISSN 1618-954X

Mahmud, K. N. and Yahayu, M. and Sarip, S. H. Md. and Rizan, N. H. and Min, C. B. and Mustafa, N. F. and Ngadiran, S. and Ujang, S. and Zakaria, Z. A. (2016) Evaluation on efficiency of pyroligneous acid from palm kernel shell as antifungal and solid pineapple biomass as antibacterial and plant growth promoter. Sains Malaysiana, 45 (10). pp. 1423-1434. ISSN 0126-6039

Majeed, K. and Hassan, A. and Bakar, A. A. and Jawaid, M. (2016) Effect of montmorillonite (MMT) content on the mechanical, oxygen barrier, and thermal properties of rice husk/MMT hybrid filler-filled low-density polyethylene nanocomposite blown films. Journal of Thermoplastic Composite Materials, 29 (7). pp. 1003-1019. ISSN 0892-7057

Majid, F. A. A. and Teh, L. C. and Abdullah, S. H. A. S. and Ahmad, R. A. and Taher, M. and Wahid, M. E. A. (2016) Preclinical evidence of Malay traditional herbal supplement for diabetes. Acta Horticulturae, 1125 . pp. 255-262. ISSN 0567-7572

Majidnia, Z. and Idris, A. (2016) Synergistic effect of maghemite and titania nanoparticles in PVA-alginate encapsulated beads for photocatalytic reduction of Pb(II). Chemical Engineering Communications, 203 (4). pp. 425-434. ISSN 0098-6445

Manas, N. H. A. and Bakar, F. D. A. and Md. Illias, R. (2016) Computational docking, molecular dynamics simulation and subsite structure analysis of a maltogenic amylase from Bacillus lehensis G1 provide insights into substrate and product specificity. Journal of Molecular Graphics and Modelling, 67 . pp. 1-13. ISSN 1093-3263

Mansor, A.F. and Mohidem, N.A. and Wan Mohd Zawawi, W.N.I. and Othman, N.S. and Endud, S. and Mat, H. (2016) The optimization of synthesis conditions for laccase entrapment in mesoporous silica microparticles by response surface methodology. Microporous and Mesoporous Materials, 220 . pp. 308-314.

Mansur, S. and Othman, M. H. D. and Ismail, A. F. and Sheikh Abdul Kadir, S. H. and Kamal, F. and Goh, P. S. and Hasbullah, H. and Ng, B. C. and Abdullah, M. S. (2016) Investigation on the effect of spinning conditions on the properties of hollow fiber membrane for hemodialysis application. Journal of Applied Polymer Science, 133 (30). ISSN 0021-8995

Marliana, M. M. and Hassan, A. and Yuziah, M. Y. N. and Khalil, H. P. S. A. and Inuwa, I. M. and Syakir, M. I. and Haafiz, M. K. M. (2016) Flame retardancy, Thermal and mechanical properties of Kenaf fiber reinforced Unsaturated polyester/Phenolic composite. Fibers and Polymers, 17 (6). pp. 902-909. ISSN 1229-9197

Mat Desa, M. S. Z. and Hassan, A. and Arsad, A. and Arjmandi, R. and Mohammad, N. N. B. (2016) Influence of rubber content on mechanical, thermal, and morphological behavior of natural rubber toughened poly(lactic acid)-multiwalled carbon nanotube nanocomposites. Journal of Applied Polymer Science, 133 (48). ISSN 0021-8995

Mataram, A. and Ismail, A. F. and Yuliwati, E. and Matsuura, T. and Rizal, S. and Zamheri, A. (2016) Stand-alone water treatment: performance of electrospun nanofibers. Jurnal Teknologi, 78 (12). pp. 103-107. ISSN 0127-9696

Md. Arshad, S. H. and Ngadi, N. and Aziz, A. A. and Amin, N. S. and Jusoh, M. and Wong, S. (2016) Preparation of activated carbon from empty fruit bunch for hydrogen storage. Journal of Energy Storage, 8 . pp. 257-261. ISSN 2352-152X

Md. Sarip, Mohd. Sharizan and Morad, Noor Azian and Yamashita, Yoshiyuki and Tsuji, Tomoya and Che Yunus, Mohd. Azizi and Abd. Aziz, Mustafa Kamal and Lam, Hon Loong (2016) Crude palm oil (CPO) extraction using hot compressed water (HCW). Separation and Purification Technology, 169 . pp. 103-112. ISSN 1383-5866

Mienda, B. S. and Shamsir, M. S. and Md. Illias, R. (2016) Model-aided atpE gene knockout strategy in Escherichia coli for enhanced succinic acid production from glycerol. Journal of Biomolecular Structure and Dynamics, 34 (8). pp. 1705-1716. ISSN 0739-1102

Moawia, R. M. and Nasef, M. M. and Mohamed, N. H. (2016) Radiation grafted natural fibres functionalized with alkalised amine for transesterification of cottonseed oil to biodiesel. Jurnal Teknologi, 78 (8-3). pp. 89-93. ISSN 0127-9696

Moawia, R. M. and Nasef, M. M. and Mohamed, N. H. and Ripin, A. (2016) Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate. Radiation Physics and Chemistry, 122 . pp. 35-42. ISSN 0969-806X

Moawia, Rihab Musaad and Nasef, Mohamed Mahmoud and Mohamed, Nor Hasimah and Ripin, Adnan (2016) Modification of flax fibres by radiation induced emulsion graft copolymerization of glycidyl methacrylate. Radiation Physics and Chemistry, 122 . pp. 35-42. ISSN 0969-806X

Mohamad, A. and Bahadoran, M. and Daud, S. and Chaudhary, K. T. and Aziz, M. S. and Jalil, M. A. and Ali, J. and Yupapin, P. P. (2016) Analysis of temperature sensor in all-pass microring resonator. Jurnal Teknologi, 78 (3). pp. 61-65. ISSN 0127-9696

Mohamad Haafiz, M. K. and Hassan, A. and Arjmandi, R. and Marliana, M. M. and Nurul Fazita, M. R. (2016) Exploring the potentials of nanocellulose whiskers derived from oil palm empty fruit bunch on the development of polylactid acid based green nanocomposites. Polymers and Polymer Composites, 24 (9). pp. 729-734. ISSN 0967-3911

Mohamad Haafiz, M. K. and Hassan, A. and Arjmandi, R. and Zakaria, Z. and Marliana, M. M. and Syakir, M. I. and Nurul Fazita, M. R. (2016) Microcrystalline cellulose from oil palm empty fruit bunches as filler in polylactic acid. Polymers and Polymer Composites, 24 (9). pp. 675-680. ISSN 0967-3911

Mohamed, M. A. and Salleh, W. N. W. and Jaafar, J. and Mohd. Hir, Z. A. and Rosmi, M. S. and Abd. Mutalib, M. and Ismail, A. F. and Tanemura, M. (2016) Regenerated cellulose membrane as bio-template for in-situ growth of visible-light driven C-modified mesoporous titania. Carbohydrate Polymers, 146 . pp. 166-173. ISSN 0144-8617

Mohamed, Mohamad Azuwa and Wan Salleh, Wan Norharyati and Jaafar, Juhana and Ismail, Ahmad Fauzi and Abd. Mutalib, Muhazri and Abdullah Sani, Nur Aimie and M. Asri, S.E.A. and Ong, Chi Siang (2016) Physicochemical characteristic of regenerated cellulose/N-doped TiO2 nanocomposite membrane fabricated from recycled newspaper with photocatalytic activity under UV and visible light irradiation. Chemical Engineering Journal, 284 . pp. 202-215. ISSN 1385-8947

Mohamed Rashid, Norhana and Kishi, Naoki and Soga, Tetsuo (2016) Effects of nanostructures on iron oxide based dye sensitized solar cells fabricated on iron foils. Materials Research Bulletin, 77 . pp. 126-130. ISSN 0025-5408

Mohammad, Nor Nisa Balqis and Arsad, Agus and Rahmat, Abdul Razak and Abdullah Sani, Nur Syazana and Ali Mohsin, Mohammed Ehtesham (2016) Influence of compatibilizer on the structure properties of polylactic acid/natural rubber blends. Polymer Science Series A, 58 (2). pp. 177-185. ISSN 0965-545X

Mohammad Rozali, N. E. and Wan Alwi, S. R. and Ho, W. S. and Manan, Z. A. and Klemes, J. J. (2016) Integration of diesel plant into a hybrid power system using power pinch analysis. Applied Thermal Engineering, 105 . pp. 792-798. ISSN 1359-4311

Mohammed, Jibril and Nasri, Noor .S. and Ahmad Zaini, Muhammad Abbas and Hamza, Usman D. and M. Zain, Husna and Ani, Farid Nasir (2016) Optimization of microwave irradiated - coconut shell activated carbon using response surface methodology for adsorption of benzene and toluene. Desalination and Water Treatment, 57 (17). pp. 7881-7897. ISSN 1944-3994

Mohammed, Y. H. and Sakrani, S. B. and Rohani, M. S. (2016) Pressure dependent tailored attributes of silicon nanoneedles grown by VHF plasma technique. Superlattices and Microstructures, 94 . pp. 147-157. ISSN 0749-6036

Mohd Marsin, A. and Muhamad, I. I. (2016) Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film. Jurnal Teknologi, 78 (6). pp. 163-168. ISSN 0127-9696

Mohd Nawi, W. N. R. and Wan Alwi, S. R. and Manan, Z. A. and Klemeš, J. J. (2016) A systematic technique for cost-effective CO2 emission reduction in process plants. Clean Technologies and Environmental Policy, 18 (6). pp. 1769-1777. ISSN 1618-954X

Mohd. Daud, N. S. and Abang Zaidel, D. N. and Kok Song, L. and Muhamad, I. I. and Mohd Jusoh, Y. M. (2016) Antioxidant properties of rice bran oil from different varieties extracted by solvent extraction methods. Jurnal Teknologi, 78 (6-12). pp. 107-110. ISSN 0127-9696

Mohd. Kassim, A. S. and Aripin, A. M. and Ishak, N. and Zainulabidin, M. H. and Abang Zaidel, D. N. F. (2016) Oil palm leaf fibre and its suitability for paper-based products. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7364-7369. ISSN 1819-6608

Mohd. Marsin, Aishah and Muhamad, Ida Idayu (2016) Effects of kappa carrageenan and glycerol in purple sweet potato starch based edible film. Jurnal Teknologi, 78 (6). pp. 163-168. ISSN 21803722

Mohd. Marsin, Aishah and Muhamad, Ida Idayu (2016) Preparation and characterization of purple sweet potato starch-based edible film with optimized mixing temperature. Journal of Advanced Research in Materials Science, 16 (1). pp. 1-10. ISSN 2289-7992

Mohd. Nawi, W. N. R. and Wan Alwi, S. R. and Manan, Z. A. and Kleme\x9A, J. J. (2016) Pinch Analysis targeting for CO2 Total Site planning. Clean Technologies and Environmental Policy, 18 (7). pp. 2227-2240. ISSN 1618-954X

Mohd. Nawi, Wan Norlinda Roshana and Wan Alwi, Sharifah Rafidah and Abd Manan, Zainuddin and Jiri, Jaromir Klemes (2016) A systematic technique for cost-effective CO2 emission reduction in process plants. Clean Technologies and Environmental Policy, 18 (6). pp. 1769-1777. ISSN 1618-954X

Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Wan Mohamad Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Mat, Hanapi (2016) Effect of synthesis conditions on physical properties, laccase catalytic activity and stability of sol–gel laccase. Journal of Sol-Gel Science and Technology, 80 (3). pp. 587-597. ISSN 0928-0707

Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Wan Mohd Zawawi, Wan Nurul Izyani and Othman, Nurul Sakinah and Mat, Hanapi (2016) Effect of synthesis conditions on physical properties, laccase catalytic activity and stability of sol-gel laccase. Journal of Sol-Gel Science and Technology, 80 (3). pp. 587-597. ISSN 0928-0707

Moideen K, I. and Isloor, A. M. and Garudachari, B. and Ismail, A. F. (2016) The effect of glycine betaine additive on the PPSU/PSF ultrafiltration membrane performance. Desalination and Water Treatment, 57 (52). pp. 24788-24798. ISSN 1944-3994

Moideen K., I. and Isloor, A. M. and Ismail, A. F. and Obaid, A. and Fun, H. K. (2016) Fabrication and characterization of new PSF/PPSU UF blend membrane for heavy metal rejection. Desalination and Water Treatment, 57 (42). pp. 19810-19819. ISSN 1944-3994

Mokhtar, M. M. and Taib, M. R. and Hassim, M. H. (2016) Decision analysis of multi-pollutant control strategy for coal-fired power plant in Malaysia. Clean Technologies and Environmental Policy, 18 (5). pp. 1361-1367. ISSN 1618-954X

Mokhtar, N. M. and Lau, W. J. and Ismail, A. F. and Kartohardjono, S. and Lai, S. O. and Teoh, H. C. (2016) The potential of direct contact membrane distillation for industrial textile wastewater treatment using PVDF-Cloisite 15A nanocomposite membrane. Chemical Engineering Research and Design, 111 . pp. 284-293. ISSN 0263-8762

Moslehyani, A. and Mobaraki, M. and Matsuura, T. and Ismail, A. F. and Othman, M. H. D. and Chowdhury, M. N. K. (2016) Novel green hybrid processes for oily water photooxidation and purification from merchant ship. Desalination, 391 . pp. 98-104. ISSN 0011-9164

Moslehyani, Ali and Mobaraki, M. and Ismail, Ahmad Fauzi and Othman, Mohd. Hafiz Dzarfan and Mayahi, A. and Shamsaei, E. and Abdullah, Mohd. Sohaimi and Razis, M. (2016) PVDF membrane for oil-in-water separation via cross-flow ultrafiltration process. Jurnal Teknologi, 78 (1). pp. 211-216. ISSN 0127-9696

Muhamad, I. I. and Quin, C. H. and Selvakumaran, S. (2016) Preparation and evaluation of water-in-soybean oil–in-water emulsions by repeated premix membrane emulsification method using cellulose acetate membrane. Journal of Food Science and Technology, 53 (4). pp. 1845-1855. ISSN 0022-1155

Muis, Z. A. and Ho, W. S. and Hashim, H. and Lee, M. Y. and Ramli, A. F. (2016) Sustainable multi-period electricity planning for Iskandar Malaysia. Clean Technologies and Environmental Policy, 18 (8). pp. 2467-2478. ISSN 1618-954X

Mushtaq, Faisal and Mat, Ramli and Ani, Farid Nasir (2016) Fuel production from microwave assisted pyrolysis of coal with carbon surfaces. Energy Conversion and Management, 110 . pp. 142-153. ISSN 0196-8904

Mustafa, Siti M. and Chua, Lee Suan and El-Enshasy, Hesham Ali Metwally Ali and Abd. Majid, Fadzilah Adibah and Abd. Malek, Roslinda (2016) A review on fruit juice probiotication: pomegranate. Current Nutrition and Food Science, 12 (1). pp. 4-11. ISSN 1573-4013

Mustapha, M. A. and Manan, Z. A. and Wan Alwi, S. R. (2016) A new green index as an overall quantitative green performance indicator of a facility. Clean Technologies and Environmental Policy, 18 (7). pp. 2161-2171. ISSN 1618-954X

Mustapha, N. and Khairuddin, N. and Muhamad, I. I. and Hashim, S. and Siddique, M. B. M. (2016) Characterization of HEC/PANI film as a potential electroactive packaging with pH Sensor. Sains Malaysiana, 45 (7). pp. 1169-1176. ISSN 0126-6039

Mutia, Reiza and Abang Zaidel, Dayang Norulfairuz and Muhamad, Ida Idayu (2016) Optimization of cocoa butter equivalent production from formulated hard palm oil mid-fraction and canola oil blends. Jurnal Teknologi, 78 (6-12). pp. 127-134. ISSN 0127-9696

Nabgan, B. and Abdullah, T. A. T. and Nabgan, W. and Ahmad, A. and Saeh, I. and Moghadamian, K. (2016) Process simulation for removing impurities from wastewater using sour water 2-strippers system via Aspen Hysys. Chemical Product and Process Modeling, 11 (4). pp. 315-321. ISSN 2194-6159

Nabgan, W. and Abdullah, T. A. T. and Mat, R. and Nabgan, B. and Asli, U. A. and Johari, A. (2016) Hydrogen production from phenol steam reforming over Ni-Co/ZrO2 catalyst: effect of catalyst dilution. Jurnal Teknologi, 78 (8-3). pp. 77-82. ISSN 0127-9696

Nabgan, W. and Abdullah, T. A. T. and Mat, R. and Nabgan, B. and Gambo, Y. and Johari, A. (2016) Evaluation of reaction parameters of the phenol steam reforming over Ni/Co On ZrO2 using the full factorial experimental design. Applied Sciences (Switzerland), 6 (8). ISSN 2076-3417

Nabgan, W. and Mat, R. and Abdullah, T. A. T. and Nabgan, B. and Gambo, Y. and Zakaria, Z. Y. (2016) Development of a kinetic model for hydrogen production from phenol over Ni-Co/ZrO2 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4444-4452. ISSN 2213-3437

Nabgan, W. and Tuan Abdullah, T. A. and Mat, R. and Nabgan, B. and Gambo, Y. and Triwahyono, S. (2016) Influence of Ni to Co ratio supported on ZrO2 catalysts in phenol steam reforming for hydrogen production. International Journal of Hydrogen Energy, 41 (48). pp. 22922-22931. ISSN 0360-3199

Nabgan, W. and Tuan Abdullah, T. A. and Mat, R. and Nabgan, B. and Triwahyono, S. and Ripin, A. (2016) Hydrogen production from catalytic steam reforming of phenol with bimetallic nickel cobalt catalyst on various supports. Applied Catalysis A: General, 527 . 161 170. ISSN 0926-860X

Nabgan, Walid and Mat, Ramli and Tuan Abdullah, Tuan Amran and Nabgan, Bahador and Gambo, Yahya and Zakaria, Zaki Yamani (2016) Development of a kinetic model for hydrogen production from phenol over Ni-Co/ZrO2 catalyst. Journal of Environmental Chemical Engineering, 4 (4). pp. 4444-4452. ISSN 2213-3437

Najib, M. Z. M. and Salmiati, Salmiati and Ujang, Z. and Salim, M. R. and Ibrahim, Z. and Muda, K. (2016) Reduction and biofixation of carbon dioxide in palm oil mill effluent using developed microbial granules containing photosynthetic pigments. Bioresource Technology, 221 . pp. 157-164. ISSN 0960-8524

Nallappan, Madana Leela and Nasef, Mohamed Mahmoud and Ahmad, Arshad (2016) Optimization of batch conditions for the removal of boron by Amberlite IR743. Jurnal Teknologi, 78 (8-3). pp. 59-64. ISSN 0127-9696

Nasir, I. A. A. and Alis, A. and Mohamad, Z. and Man, S. H. C. and Majid, R. A. (2016) Rigid polyurethane foam from palm oil polyol-polyethylene glycol blend. Journal of Polymer Materials, 33 (4). pp. 629-637. ISSN 0973-8622

Nasiri, Mahtab and Tabrizi, Sayed Ali Hassanzadeh and Almaki, Javad Hamzehalipour and Nasiri, Rozita and Idris, Ani and Dabagh, Shadab (2016) Synthesis, functionalization, characterization, and: in vitro evaluation of robust pH-sensitive CFNs-PA-CaCO3. RSC Advances, 6 (87). pp. 84217-84230. ISSN 2046-2069

Nasiri, R. and Hamzehalipour Almaki, J. and Idris, A. B. and Abdul Majid, F. A. and Nasiri, M. and Salouti, M. and Irfan, M. and Amini, N. and Marvibaigi, M. (2016) In vitro evaluation of actively targetable superparamagnetic nanoparticles to the folate receptor positive cancer cells. Materials Science and Engineering C, 69 . pp. 1147-1158. ISSN 0928-4931

Ngadi, Norzita and Hamdan, Nur Fadzlyana and Hassan, Onn and Putra Jaya, Ramadhansyah (2016) Production of biodiesel from palm oil using egg shell waste as heterogeneous catalyst. Jurnal Teknologi, 78 (9). pp. 59-63. ISSN 0127-9696

Noah, N. F. M. and Othman, N. and Jusoh, N. (2016) Highly selective transport of palladium from electroplating wastewater using emulsion liquid membrane process. Journal of the Taiwan Institute of Chemical Engineers, 64 . pp. 134-141. ISSN 1876-1070

Noor, N. M. and Khan, A. A. and Hasham, R. and Talib, A. and Sarmidi, M. R. and Aziz, R. and Abd., A. (2016) Empty nano and micro-structured lipid carriers of virgin coconut oil for skin moisturisation. IET Nanobiotechnology, 10 (4). pp. 195-199. ISSN 1751-8741

Nor, N. A. M. and Jaafar, J. and Ismail, A. F. and Mohamed, M. A. and Rahman, M. A. and Othman, M. H. D. and Lau, W. J. and Yusof, N. (2016) Preparation and performance of PVDF-based nanocomposite membrane consisting of TiO2 nanofibers for organic pollutant decomposition in wastewater under UV irradiation. Desalination, 391 . pp. 89-97. ISSN 0011-9164

Nor Azmi, N. F. S. and Mohammed Evuti, A. and Abu Hassan, M. A. and Raja Ibrahim, R. K. (2016) Optimization of non thermal plasma reactor performance for the decomposition of xylene. Jurnal Teknologi, 78 (8). pp. 165-171. ISSN 0127-9696

Nyakuma, B. and Ahmad, A. and Johari, A. and Abdullah, T. and Oladokun, O. and Uthman, H. and Halim, M. (2016) Thermal decomposition kinetics of torrefied oil palm empty fruit bunch briquettes. Chemistry and Chemical Technology, 10 (3). pp. 325-328. ISSN 1996-4196

Nyakuma, B. B. and Ahmad, A. and Johari, A. and Abdullah, T. A. T. (2016) Thermogravimetric and kinetic analyses of oil palm empty fruit bunch (OPEFB) pellets using the distributed activation energy model. Journal of Physical Science, 27 (3). pp. 67-83. ISSN 1675-3402

Nyakuma, B. B. and Ahmad, A. and Johari, A. and Abdullah, T. A. T. and Oladokun, O. and Alkali, H. (2016) Gasification of oil palm empty fruit bunches (OPEFB) briquettes for bio-syngas production. Jurnal Teknologi, 78 (8-3). pp. 83-88. ISSN 0127-9696

Nyakuma, B. B. and Jauro, A. and Oladokun, O. and Abdullah, T. A. T. and Uthman, H. (2016) Combustion kinetics of Shankodi-Jangwa coal. Journal of Physical Science, 27 (3). pp. 1-12. ISSN 1675-3402

Oladokun, O. and Ahmad, A. and Abdullah, T. A. T. and Nyakuma, B. B. and Bello, A. A. H. and Al-Shatri, A. H. (2016) Multicomponent devolatilization kinetics and thermal conversion of imperata cylindrica. Applied Thermal Engineering, 105 . pp. 931-940. ISSN 1359-4311

Oladokun, O. and Ahmad, A. and Abdullah, T. A. T. and Nyakuma, B. B. and Kamaroddin, M. F. A. and Ahmed, M. and Alkali, H. (2016) Sensitivity analysis of biohydrogen production from Imperata cylindrica using stoichiometric equilibrium model. Jurnal Teknologi, 78 (8-3). pp. 137-142. ISSN 0127-9696

Oladokun, O. and Ahmad, A. and Abdullah, T. A. T. and Nyakuma, B. B. and Wong, S. L. (2016) Model free kinetics analysis of Imperata cylindrica (Lalang). Jurnal Teknologi, 78 (8-3). pp. 25-31. ISSN 0127-9696

Ong, Chi Siang and Goh, Pei Sean and Lau, Woei Jye and Misdan, Nurasyikin and Ismail, Ahmad Fauzi (2016) Nanomaterials for biofouling and scaling mitigation of thin film composite membrane: a review. Desalination, 393 . pp. 2-15. ISSN 0011-9164

Ooi, Zing Yi and Othman, Norasikin and Choo, Ching Li (2016) The role of internal droplet size on emulsion stability and the extraction performance of kraft lignin removal from pulping wastewater in emulsion liquid membrane process. Journal of Dispersion Science and Technology, 37 (4). pp. 544-554. ISSN 0193-2691

Ooi, Zing Yi and Othman, Norasikin and Mohamed Noah, Norul Fatiha (2016) Response surface optimization of kraft lignin recovery from pulping wastewater through emulsion liquid membrane process. Desalination and Water Treatment, 57 (17). pp. 7823-7832. ISSN 1944-3994

Othman, M. R. and Idris, R. and Hassim, M. H. and Ibrahim, W. H. W. (2016) Prioritizing HAZOP analysis using analytic hierarchy process (AHP). Clean Technologies and Environmental Policy, 18 (5). pp. 1345-1360. ISSN 1618-954X

Othman, N. and Harruddin, N. and Idris, A. and Ooi, Z. Y. and Fatiha, N. and Raja Sulaiman, R. N. (2016) Fabrication of polypropylene membrane via thermally induced phase separation as a support matrix of tridodecylamine supported liquid membrane for Red 3BS dye removal. Desalination and Water Treatment, 57 (26). pp. 12287-12301. ISSN 1944-3994

Phoon, L. Y. and Hashim, H. and Mat, R. and Mustaffa, A. A. (2016) Flash point prediction of tailor-made green diesel blends containing B5 palm oil biodiesel and alcohol. Fuel, 175 . pp. 287-293. ISSN 0016-2361

Piroozian, A. and Hemmati, M. and Ismail, I. and Manan, M. A. and Bayat, A. E. and Mohsin, R. (2016) Effect of emulsified water on the wax appearance temperature of water-in-waxy-crude-oil emulsions. Thermochimica Acta, 637 . pp. 132-142. ISSN 0040-6031

Piroozian, A. and Manan, M. A. and Ismail, I. and Mohsin, R. and Bayat, A. E. and Onuoha, M. D. U. and Hemmati, M. (2016) Mixture temperature prediction of waxy oil-water two-phase system flowing near wax appearance temperature. Chinese Journal of Chemical Engineering, 24 (6). pp. 795-802. ISSN 1004-9541

Piroozian, A. and Manan, M. A. and Ismail, I. and Mohsin, R. and Bayat, A. E. and Onuoha, M. D. U. and Hemmati, M. (2016) Mixture temperature prediction of waxy oil–water two-phase system flowing near wax appearance temperature. Chinese Journal of Chemical Engineering, 24 (6). pp. 795-802. ISSN 1004-9541

Pour, R. H. and Hassan, A. and Soheilmoghaddam, M. and Bidsorkhi, H. C. (2016) Mechanical, thermal, and morphological properties of graphene reinforced polycarbonate/acrylonitrile butadiene styrene nanocomposites. Polymer Composites, 37 (6). pp. 1633-1640. ISSN 0272-8397

Purwanto, M. and Atmaja, L. and Mohamed, M. A. and Salleh, M. T. and Jaafar, J. and Ismail, A. F. and Santoso, M. and Widiastuti, N. (2016) Biopolymer-based electrolyte membranes from chitosan incorporated with montmorillonite-crosslinked GPTMS for direct methanol fuel cells. RSC Advances, 6 (3). pp. 2314-2322. ISSN 2046-2069

Quah, Zhi Yong and Ahmad Zaini, Muhammad Abbas (2016) Adsorption of rhodamine B by palm kernel shell adsorbents. Journal of Engineering and Technology, 7 (2). pp. 1-16. ISSN 21803811

Rahim, F. L. M. and Hassim, M. H. and Mokhtar, M. M. and Kidam, K. (2016) Health risk assessment due to emissions from medical waste incinerator in Malaysia. Jurnal Teknologi, 78 (8-3). pp. 109-115. ISSN 0127-9696

Rahmani, O. and Highfield, J. and Junin, R. and Tyrer, M. and Pour, A. B. (2016) Experimental investigation and simplistic geochemical modeling of CO2 mineral carbonation using the mount tawai peridotite. Molecules, 21 (3). ISSN 1420-3049

Raja Sulaiman, Raja Norimie and Othman, Norasikin and Saidina Amin, Nor Aishah (2016) Recovery of ionized nanosilver by emulsion liquid membrane process and parameters optimization using response surface methodology. Desalination and Water Treatment, 57 (8). pp. 3339-3349. ISSN 19443994

Ramli, N. A. S. and Amin, N. A. S. (2016) Kinetic study of glucose conversion to levulinic acid over Fe/HY zeolite catalyst. Chemical Engineering Journal, 283 . pp. 150-159. ISSN 1385-8947

Rashid, N. M. and Kishi, N. and Soga, T. (2016) Fabrication of Fe2O3 nanoflakes-based electrochemical solar cells prepared by facile thermal oxidation. Modern Physics Letters B, 30 (15). ISSN 0217-9849

Rashid, N. M. and Kishi, N. and Soga, T. (2016) Effects of reduction temperature on copper nanowires growth by thermal reduction of copper oxide nanowires. Modern Physics Letters B, 30 (17).

Resdi, R. and Lim, J. S. and Kamyab, H. and Lee, C. T. and Hashim, H. and Mohamad, N. and Ho, W. S. (2016) Review of microalgae growth in palm oil mill effluent for lipid production. Clean Technologies and Environmental Policy, 18 (8). pp. 2347-2361. ISSN 1618-954X

Rezaei-Dasht Arzhandi, M. and Ismail, A. F. and Ghanbari, M. and Bakeri, G. and Hashemifard, S. A. and Matsuura, T. and Moslehyani, A. (2016) An investigation of temperature effects on the properties and CO2 absorption performance of porous PVDF/montmorillonite mixed matrix membranes. Journal of Natural Gas Science and Engineering, 31 . pp. 515-524. ISSN 1875-5100

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Mohamed, Mohamad Azuwa and Ismail, Nor Hadiani and Sazali, N. and Jaafar, Jafariah and Hasbullah, Hasrinah (2016) Electrospun nanofiber-coated membrane: a review. Jurnal Teknologi, 78 (12). pp. 83-88. ISSN 0127-9696

Rosmi, M. S. and Yaakob, Y. and Mohd. Yusop, M. Z. and Sharma, S. and Zulkifli, Z. and Supee, A. and Kalita, G. and Tanemura, M. (2016) Room temperature fabrication of 1D carbon-copper composite nanostructures directly on Cu substrate and their field emission properties. AIP Advances, 6 (9). ISSN 2158-3226

Roushenas, P. and Yusop, Z. and Majidnia, Z. and Nasrollahpour, R. (2016) Photocatalytic degradation of spilled oil in sea water using maghemite nanoparticles. Desalination and Water Treatment, 57 (13). pp. 5837-5841. ISSN 1944-3994

Sadhukhan, Jhuma and Martinez-Hernandez, Elias and Murphy, Richard J. and Ng, Denny Kok Sum and Hassim, Mimi Haryani and Ng, Kok Siew and Kin, Wan Yoke and Md. Jaye, Ida Fahani and Hang, Melissa Yuling Leung Pah and Andiappan, Viknesh (2016) Role of bioenergy, biorefinery and bioeconomy in sustainable development: strategic pathways for Malaysia. Renewable and Sustainable Energy Reviews . (In Press)

Salamun, N. and Triwahyono, S. and Jalil, A. A. and Majid, Z. A. and Ghazali, Z. and Othman, N. A. F. and Prasetyoko, D. (2016) Surface modification of banana stem fibers via radiation induced grafting of poly(methacrylic acid) as an effective cation exchanger for Hg(II). RSC Advances, 6 (41). pp. 34411-34421. ISSN 2046-2069

Saman, N. and Johari, K. and Song, S. T. and Kong, H. and Cheu, S. C. and Mat, H. (2016) High removal efficiency of Hg(II) and MeHg(II) from aqueous solution by coconut pith - Equilibrium, kinetic and mechanism analyses. Journal of Environmental Chemical Engineering, 4 (2). pp. 2487-2499. ISSN 2213-3437

Saman, Norasikin and Johari, Khairiraihanna and Song, Shiow Tien and Mat, Hanapi (2016) Surface modifications of agrowaste biomass for Hg(II) and MeHg(II) removal from aqueous solution, oilfield produced water and natural gas condensate. Environmental Earth Sciences, 75 (4). pp. 1-12. ISSN 1866-6280

Samavati, A. and Mustafa, M. K. and Ismail, A. F. and Othman, M. H. D. and Rahman, M. A. (2016) Copper-substituted cobalt ferrite nanoparticles: structural, optical and antibacterial properties. Materials Express, 6 (6). pp. 473-482. ISSN 2158-5849

Sani, N. A. A. and Lau, W. J. and Nordin, N. A. H. M. and Ismail, A. F. (2016) Influence of organic solvents and operating conditions on the performance of polyphenylsulfone (PPSU)/copper-1,3,5-benzenetricarboxylate (Cu-BTC) solvent resistant nanofiltration (SRNF) membranes. Chemical Engineering Research and Design, 115 . pp. 66-76. ISSN 0263-8762

Saranya, R. and Kumar, M. and Tamilarasan, R. and Ismail, A. F. and Arthanareeswaran, G. (2016) Functionalised activated carbon modified polyphenylsulfone composite membranes for adsorption enhanced phenol filtration. Journal of Chemical Technology and Biotechnology, 91 (3). pp. 748-761. ISSN 0268-2575

Sari, A. A. and Tachibana, S. and Muryanto, Muryanto and Hadibarata, T. (2016) Development of bioreactor systems for decolorization of Reactive Green 19 using white rot fungus. Desalination and Water Treatment, 57 (15). pp. 7029-7039. ISSN 1944-3994

Sathishkumar, P. and Preethi, J. and Vijayan, R. and Mohd. Yusoff, A. R. and Ameen, F. and Suresh, S. and Balagurunathan, R. and Palvannan, T. (2016) Anti-acne, anti-dandruff and anti-breast cancer efficacy of green synthesised silver nanoparticles using Coriandrum sativum leaf extract. Journal of Photochemistry and Photobiology B: Biology, 163 . pp. 69-76. ISSN 1011-1344

Seah, Yieng Shing and Chwan, Dominic Yee Foo and H. Hassim, Mimi (2016) Considering fugitive emissions during the conceptual design stage. Chemical Engineering, 123 (11). pp. 58-64. ISSN 0009-2460

Selvakumaran, Suguna and Muhamad, Ida Idayu and Abd. Razak, Saiful Izwan (2016) Evaluation of kappa carrageenan as potential carrier for floating drug delivery system: effect of pore forming agents. Carbohydrate Polymers, 135 . pp. 207-214. ISSN 0144-8617

Selvam, S. B. and Chelliapan, S. and Din, M. F. M. and Shahperi, R. and Aris, M. A. M. (2016) Adsorption of heavy metals from matured leachate by Gracilaria. sp extract. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 7 (3). pp. 15-20.

Sharer, Zalilah and Arsad, Agus and Mohsin, Rahmat and Abdul Majid, Zulkifli and Nasri, Noor Shawal (2016) Protective properties of multilayer coatings containing inhibitive primer. Journal of Advanced Research in Materials Science, 27 (1). pp. 11-18. ISSN 2289-7992

Sharma, R. K. and Ganesan, P. and Tyagi, V. V. and Metselaar, H. S. C. and Sandaran, S. C. (2016) Thermal properties and heat storage analysis of palmitic acid-TiO2 composite as nano-enhanced organic phase change material (NEOPCM). Applied Thermal Engineering, 99 . pp. 1254-1260. ISSN 1359-4311

Shenvi, S. S. and Isloor, A. M. and Ahmad, A. L. and Garudachari, B. and Ismail, A. F. (2016) Influence of palm oil fuel ash, an agro-industry waste on the ultrafiltration performance of cellulose acetate butyrate membrane. Desalination and Water Treatment, 57 (55). pp. 26414-26426. ISSN 1944-3994

Shim, J. and Faridh, M. and Yu, J. and Rhee, S. (2016) The weldability of dissimilar three-steel sheet using constant power control method for resistance spot welding. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (5). pp. 959-967. ISSN 1464-4207

Shreaz, S. and Shiekh, R. A. and Raja, V. and Wani, W. A. and Behbehani, J. M. (2016) Impaired ergosterol biosynthesis mediated fungicidal activity of Co(II) complex with ligand derived from cinnamaldehyde. Chemico-Biological Interactions, 247 . pp. 64-74. ISSN 0009-2797

Shukery, M. F. M. and Hashim, Haslenda and Lim, J. S. (2016) Superstructure-based synthesis and optimisation of an oil palm eco-industrial town: a case study in Iskandar Malaysia. Clean Technologies and Environmental Policy, 18 (7). pp. 2119-2129. ISSN 1618-954X

Shukor, Hafiza and Abdeshahian, Peyman and Al-Shorgani, Najeeb Kaid Nasser and Abdul Hamid, Aidil and A. Rahman, Norliza and Kalil, Mohd. Sahaid (2016) Saccharification of polysaccharide content of palm kernel cake using enzymatic catalysis for production of biobutanol in acetone-butanol-ethanol fermentation. Bioresource Technology, 202 . pp. 206-213. ISSN 0960-8524

Sidek, Akhmal and Hamzah, Umar and Samsudin, Abd. Rahim and Arifin, M. Hariri and Junin, Radzuan (2016) Deep crustal profile across NW Sabah basin: integrated potential field data and seismic reflection. ARPN Journal of Engineering and Applied Sciences, 11 (3). pp. 1401-1411. ISSN 1819-6608

Sidik, S. M. and Jalil, A. A. and Triwahyono, S. and Asli, U. A. (2016) CO2 reforming of methane over ni supported on mesostructured silica nanoparticles (NI/MSN): effect of NI loading. Jurnal Teknologi, 78 (8-3). pp. 13-18. ISSN 0127-9696

Sidik, S. M. and Triwahyono, S. and Jalil, A. A. and Aziz, M. A. A. and Fatah, N. A. A. and Teh, L. P. (2016) Tailoring the properties of electrolyzed Ni/mesostructured silica nanoparticles (MSN) via different Ni-loading methods for CO2 reforming of CH4. Journal of CO2 Utilization, 13 . pp. 71-80. ISSN 2212-9820

Sidik, S. M. and Triwahyono, S. and Jalil, A. A. and Majid, Z. A. and Salamun, N. and Talib, N. B. and Abdullah, T. A. T. (2016) CO2 reforming of CH4 over Ni-Co/MSN for syngas production: role of Co as a binder and optimization using RSM. Chemical Engineering Journal, 295 . pp. 1-10. ISSN 1385-8947

Song, S. T. and Hau, Y. F. and Saman, N. and Johari, K. and Cheu, S. C. and Kong, H. and Mat, H. (2016) Process analysis of mercury adsorption onto chemically modified rice straw in a fixed-bed adsorber. Journal of Environmental Chemical Engineering, 4 (2). pp. 1685-1697. ISSN 2213-3437

Sriram, K. and Arthanareeswaran, Gangasalam and Ismail, Ahmad Fauzi and Paul, Diby (2016) Effects of special nanoparticles on fuel cell properties of sulfonated polyethersulfone membrane. International Journal of Polymeric Materials and Polymeric Biomaterials, 65 (6). pp. 294-301. ISSN 0091-4037

Suhaimi, M. S. and Saat, A. and Wahid, M. A. and Mohd. Sies, M. (2016) Flame propagation and burning rates of methane-air mixtures using schlieren photography. Jurnal Teknologi, 78 (10-2). pp. 21-27. ISSN 0127-9696

Suhana, J. and Rashid, M. (2016) Naturally occurring radionuclides in particulate emission from a coal fired power plant: a potential contamination? Journal Of Environmental Chemical Engineering, 4 (4). pp. 4904-4910. ISSN 2213-3437

Sulaiman, S. Z. and Kasmani, R. M. and Mustafa, A. (2016) Experimental study on flame propagation in a straight pipe. Jurnal Teknologi, 78 (8-3). pp. 71-75. ISSN 0127-9696

Sultana, Naznin and Zainal, Anisah (2016) Cellulose acetate electrospun nanofibrous membrane: fabrication, characterization, drug loading and antibacterial properties. Bulletin of Materials Science, 39 (2). pp. 337-343. ISSN 0250-4707

Supee, A. and Ichimura, M. (2016) Effects of complexing agents on electrochemical deposition of FeSxOy thin films. Japanese Journal of Applied Physics, 55 (8). ISSN 0021-4922

Tahir, B. and Tahir, M. and Amin, N. A. S. (2016) Photocatalytic CO2 conversion over Au/TiO2 nanostructures for dynamic production of clean fuels in a monolith photoreactor. Clean Technologies and Environmental Policy, 18 (7). pp. 2147-2160. ISSN 1618-954X

Tahir, Beenish and Tahir, Muhammad and Saidina Amin, Nor Aishah (2016) Photocatalytic reverse water gas shift co2 reduction to co over montmorillonite supported tio2 nanocomposite. Chemical Engineering Transactions, 56 . pp. 319-324. ISSN 2283-9216

Tahir, Muhammad and Saidina Amin, Nor Aishah (2016) Performance analysis of nanostructured NiO-In2O3/TiO2 catalyst for CO2 photoreduction with H2 in a monolith photoreactor. Chemical Engineering Journal, 285 . pp. 635-649. ISSN 1385-8947

Tahir, M. and Tahir, B. (2016) Dynamic photocatalytic reduction of CO2 to CO in a honeycomb monolith reactor loaded with Cu and N doped TiO2 nanocatalysts. Applied Surface Science, 377 . pp. 244-252. ISSN 0169-4332

Tahir, M. and Tahir, B. and Amin, N. A. S. and Muhammad, A. (2016) Photocatalytic CO2 methanation over NiO/In2O3 promoted TiO2 nanocatalysts using H2O and/or H2 reductants. Energy Conversion and Management, 119 . pp. 368-378. ISSN 0196-8904

Tahir, M. and Tahir, B. and Saidina Amin, N. A. and Alias, H. (2016) Selective photocatalytic reduction of CO2 by H2O/H2 to CH4 and CH3OH over Cu-promoted In2O3/TiO2 nanocatalyst. Applied Surface Science, 389 . pp. 46-55. ISSN 0169-4332

Talebian-Kiakalaieh, Amin and Saidina Amin, Nor Aishah (2016) Theoretical and experimental evaluation of mass transfer limitation in gas phase dehydration of glycerol to acrolein over supported HSiW catalyst. Journal of the Taiwan Institute of Chemical Engineers, 59 . pp. 11-17. ISSN 18761070

Talebian-Kiakalaieh, A. and Amin, N. A. S. and Zakaria, Z. Y. (2016) Gas phase selective conversion of glycerol to acrolein over supported silicotungstic acid catalyst. Journal of Industrial and Engineering Chemistry, 34 . pp. 300-312. ISSN 1226-086X

Talib, R. and Md. Supie, H. S. and Kamsah, M. Z. and Naim, H. A. and Mohd. Yusof, S. (2016) Assessment for learning: supervisory feedback practice in higher education. Man in India, 96 (1-2). pp. 39-47. ISSN 0025-1569

Tan, A. P. and Yeak, S. H. and Sahnoun, R. (2016) Pristine study of axial tensile strain energy curve for single-walled carbon nanotube using molecular dynamics simulation. Indian Journal of Science and Technology, 9 (28). ISSN 0974-6846

Tan, L. P. and Wong, K. Y. (2016) Importance versus practice of knowledge management constructs in manufacturing companies. Business Information Review, 33 (4). pp. 232-240. ISSN 0266-3821

Tan, S. T. and Hashim, H. and Abdul Rashid, A. H. and Wong, E. K. Y. and Lim, J. S. and Ho, W. S. and Jaafar, A. B. (2016) Potential of biomass to resource as an action to mitigate transboundary haze in ASEAN country. Chemical Engineering Transactions, 52 . pp. 1165-1170. ISSN 2283-9216

Tang, J. P. and Lam, H. L. and Aziz, M. K. A. and Morad, N. A. (2016) Enhanced Biomass Characteristics Index in palm biomass calorific value estimation. Applied Thermal Engineering, 105 . pp. 941-949. ISSN 1359-4311

Tanjung, F. A. and Husseinsyah, S. and Hussin, K. and Hassan, A. (2016) Mechanical and thermal properties of organosolv lignin/sodium dodecyl sulphate binary agent-treated polypropylene/chitosan composites. Polymer Bulletin, 73 (5). pp. 1427-1445. ISSN 0170-0839

Ten, J. Y. and Hassim, M. H. and Chemmangattuvalappil, N. and Ng, D. K. S. (2016) A novel chemical product design framework with the integration of safety and health aspects. Journal of Loss Prevention in the Process Industries, 40 . pp. 67-80. ISSN 0950-4230

Tham, Weng Hong and Wahit, Mat Uzir and Abdul Kadir, Mohammed Rafiq and Wong, Tuck Whye and Hassan, Onn (2016) Polyol-based biodegradable polyesters: a short review. Reviews in Chemical Engineering, 32 (2). pp. 201-221. ISSN 0167-8299

Then, C. and Wai, O. K. and Elsayed, E. A. and Mustapha, W. Z. W. and Othman, N. Z. and Aziz, R. and Wadaan, M. and El Enshsay, H. A. (2016) Comparison between classical and statistical medium optimization approaches for high cell mass production of Azotobacter Vinelandii. Journal of Scientific and Industrial Research, 75 . pp. 231-238. ISSN 0022-4456

Theo, W. L. and Mustaffa, A. A. and Lim, J. S. (2016) Solubility modelling for phytochemicals of Misai Kucing in different solvents. Fluid Phase Equilibria, 427 . pp. 246-258. ISSN 0378-3812

Thiele, M. and Soh, J. Z. E. and Knauer, A. and Malsch, D. and Stranik, O. and Müller, R. and Csáki, A. and Henkel, T. and Köhler, J. M. and Fritzsche, W. (2016) Gold nanocubes - Direct comparison of synthesis approaches reveals the need for a microfluidic synthesis setup for a high reproducibility. Chemical Engineering Journal, 288 . pp. 432-440. ISSN 1385-8947

Thuyavan, Y. L. and Anantharaman, N. and Arthanareeswaran, G. and Ismail, A. F. (2016) Impact of solvents and process conditions on the formation of polyethersulfone membranes and its fouling behavior in lake water filtration. Journal of Chemical Technology and Biotechnology, 91 (10). pp. 2568-2581. ISSN 0268-2575

Ting, T. M. and Nasef, M. M. and Hashim, K. (2016) Evaluation of boron adsorption on new radiation grafted fibrous adsorbent containing N-methyl-D-glucamine. Journal of Chemical Technology and Biotechnology, 91 (7). pp. 2009-2017. ISSN 0268-2575

Tsuji, T. and Hoshina, T. and Hiaki, T. and Itoh, N. (2016) Adsorption and phase equilibria for hydrogen storage system based on dehydrogenation reaction of naphthenes, and its process design. Journal of the Japan Petroleum Institute, 59 (3). pp. 73-83.

Ubani, C. A. and Ibrahim, M. A. and Teridi, M. A. M. and Sopian, K. and Ali, J. and Chaudhary, K. T. (2016) Application of graphene in dye and quantum dots sensitized solar cell. Solar Energy, 137 . pp. 531-550.

Umor, Noor Azrimi and Azmi, Musfirah and Jamroo, Noor Ashiqin and Khalil, Khalilah and Syed Muhammad, Syed Anuar Fauaad and Nik Mahmood, Nik Azmi (2016) Bioconversion of oil palm frond to reducing sugar in solid state fermentation by applying water-fed strategy. Journal of Engineering and Applied Sciences, 11 (9). pp. 1916-1920. ISSN 1816-949X

Nabga, W. and Abdullah, T. A. T. and Mat, R. and Nabgan, B. and Gambo, Y. and Moghadamian, K. (2016) Acetic acid-phenol steam reforming for hydrogen production: effect of different composition of La2O3-Al2O3 support for bimetallic Ni-Co catalyst. Journal of Environmental Chemical Engineering, 4 (3). pp. 2765-2773.

Johari, K. and Saman, N. and Song, S. T. and Chin, C. S. and Kong, H. and Mat, H. (2016) Adsorption enhancement of elemental mercury by various surface modified coconut husk as eco-friendly low-cost adsorbents. International Biodeterioration and Biodegradation, 109 . pp. 45-52.

Halimoon, H. and Hussain, A. R. and Kouzani, A. and Alam, M. N. H. Z. (2016) Aerobic fermentation of saccharomeyes cerevisae in a miniature bioreactor made of low cost poly(methylmethacrylate) (PMMA) and Poly(Dimethylsiloxane) (PDMS) Polymers. Sains Malaysiana, 45 (6). pp. 969-976.

Mohamed Rashid, Norhana and Kishi, Naoki and Soga, Tetsuo (2016) Effect of pre-annealing temperature on the growth of aligned α-Fe2o3 nanowires via a two-step thermal oxidation. Surface Review and Letters, 23 (4). ISSN 0218-625X

Uzair, M. A. and Waqas, A. and Khoja, A. H. and Ahmed, N. (2016) Experimental study of catalytic degradation of polypropylene by acid-activated clay and performance of Ni as a promoter. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 38 (24). pp. 3618-3624. ISSN 15567-036

Van Fan, Y. and Lee, C. T. and Klemes, J. J. and Bong, C. P. C. and Ho, W. S. (2016) Economic assessment system towards sustainable composting quality in the developing countries. Clean Technologies and Environmental Policy, 18 (8). pp. 2479-2491. ISSN 1618-954X

Wahid, Abdul and Ahmad, Arshad (2016) Improved multi-model predictive control to reject very large disturbances on a distillation column. International Journal of Technology, 7 (6). pp. 962-971. ISSN 2086-9614

Wahidin, Suzana and Idris, Ani and Muhamad Shaleh, Sitti Raehanah (2016) Ionic liquid as a promising biobased green solvent in combination with microwave irradiation for direct biodiesel production. Bioresource Technology, 206 . pp. 150-154. ISSN 0960-8524

Wai, Lip Theo and Mustaffa, Azizul Azri and Jeng, Shiun Lim (2016) Solubility modelling for phytochemicals of Misai Kucing in different solvents. Fluid Phase Equilibria, 427 . pp. 246-258. ISSN 0378-3812

Wan Alwi, S. R. and Manan, Z. A. (2016) Simultaneous energy targeting, placement of utilities with flue gas, and design of heat recovery networks. Applied Energy, 161 . pp. 605-610. ISSN 0306-2619

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Mohamed, Azman and Ngadi, Norzita and Jayanti, Dewi Sri (2016) The potential of waste cooking oil as bio-asphalt for alternative binder – an overview. Jurnal Teknologi, 78 (4). pp. 111-116. ISSN 0127-9696

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Ngadi, Norzita and Abdullah, Mohd. Ezree and Mohamed, Abdullahi Ali (2016) A review on application of waste cooking oil as rejuvenator in porous asphalt mixture. Jurnal Teknologi, 78 (4). pp. 105-109. ISSN 0127-9696

Wan Azahar, Wan Nur Aifa and Bujang, Mastura and Putra Jaya, Ramadhansyah and Hainin, Mohd. Rosli and Ngadi, Norzita and Al Bakri Abdullah, Mohd. Mustafa (2016) Effect of antioxidant characteristic from waste cooking oil in modified asphalt binder. Key Engineering Materials, 700 . pp. 197-206. ISSN 1013-9826

Wan Azelee, N. I. and Jahim, J. M. and Ismail, A. F. and Fuzi, S. F. Z. M. and Rahman, R. A. and Ghazali, N. F. and Illias, R. M. (2016) Enzymatic hydrolysis of pretreated kenaf using a recombinant xylanase: effects of reaction conditions for optimum hemicellulose hydrolysis. American Journal of Agricultural and Biological Science, 11 (2). pp. 54-66. ISSN 1557-4989

Wan Azelee, N. I. and Jahim, J. M. and Ismail, A. F. and Fuzi, S. F. Z. M. and Rahman, R. A. and Md Illias, R. (2016) High xylooligosaccharides (XOS) production from pretreated kenaf stem by enzyme mixture hydrolysis. Industrial Crops and Products, 81 . pp. 11-19. ISSN 0926-6690

Wan Mohd. Zawawi, Wan Nurul Izyani and Mansor, Azmi Fadziyana and Othman, Nurul Sakinah and Mohidem, Nur Atikah and Nik Malek, Nik Ahmad Nizam and Mat, Hanapi (2016) Synthesis and characterization of immobilized white-rot fungus Trametes versicolor in sol–gel ceramics. Journal of Sol-Gel Science and Technology, 77 (1). pp. 28-38. ISSN 0928-0707

Wan Omar, W. N. N. and Amin, N. A. S. (2016) Multi response optimization of oil palm frond pretreatment by ozonolysis. Industrial Crops and Products, 85 . pp. 389-402. ISSN 0926-6690

Wan Omar, Wan Nor Nadyaini and Saidina Amin, Nor Aishah (2016) Multi response optimization of oil palm frond pretreatment by ozonolysis. Industrial Crops and Products, 85 . pp. 389-402. ISSN 0926-6690

Wan Sulaiman, Wan Rosli and Azza, Hashim Abbas and Jaafar, Mohd. Zaidi and Ahmad, Kamal Idris (2016) Lignin black liquor in chemical enhanced oil recovery: a review for sacrificial agent. Journal of Petroleum & Environmental Biotechnology, 7 (5). pp. 1-4. ISSN 2157-7463

Wan Tajulruddin, Wan Nurhayati and Rahmat, Abdul Razak and Abd. Majid, Rohah (2016) Synthesis of bio-based hydrogel from epoxidized palm oil catalyzed by fluoroantimonic acid hexahydrate. Malaysian Journal of Analytical Sciences, 20 (5). pp. 1129-1137. ISSN 1394-2506

Wan-Mohtar, W. A. A. Q. I. and Abd. Malek, R. and Harvey, L. M. and McNeil, B. (2016) Exopolysaccharide production by Ganoderma lucidum immobilised on polyurethane foam in a repeated-batch fermentation. Biocatalysis and Agricultural Biotechnology, 8 . pp. 24-31. ISSN 1878-8181

Ward, K. and Cheng, S. I. and Stuckey, D. C. (2016) Protein separation using non-ionic and cationic surfactant precipitation. Journal of Chemical Technology and Biotechnology, 91 (10). pp. 2563-2567. ISSN 0268-2575

Wong, Ee Ting and Chan, Kian Hwa and Irfan, Muhammad and Idris, Ani (2016) Investigation of Cu(II) removal by cobalt-doped iron oxide captured in PVA-alginate beads. Desalination and Water Treatment, 57 (5). pp. 2052-2063. ISSN 19443994

Wong, S. and Ngadi, N. and Tuan Abdullah, T. A. and Inuwa, I. M. (2016) Catalytic cracking of LDPE dissolved in benzene using nickel-impregnated zeolites. Industrial and Engineering Chemistry Research, 55 (9). pp. 2543-2555. ISSN 0888-5885

Wong, S. L. and Tuan Abdullah, T. A. and Ngadi, N. and Ahmad, A. and Inuwa, I. M. (2016) Parametric study on catalytic cracking of LDPE to liquid fuel over ZSM-5 zeolite. Energy Conversion and Management, 122 . pp. 428-438. ISSN 0196-8904

Wong, Syie Luing and Ngadi, Norzita and Amin, Nor Aishah Saidina and Tuan Abdullah, Tuan Amran and Inuwa, I. M. (2016) Pyrolysis of low density polyethylene waste in subcritical water optimized by response surface methodology. Environmental Technology (United Kingdom), 37 (2). pp. 245-254. ISSN 0959-3330

Woon, J. S. K. and Mackeen, M. M. and Mahadi, N. M. and Illias, R. M. and Abdul Murad, A. M. and Abu Bakar, F. D. (2016) Expression and characterization of a cellobiohydrolase (CBH7B) from the thermophilic fungus Thielavia terrestris in Pichia pastoris. Biotechnology and Applied Biochemistry, 63 (5). pp. 690-698. ISSN 0885-4513

Woon, J. S. K. and Mackeen, M. M. and Sudin, A. H. and Mahadi, N. M. and Illias, R. M. and Murad, A. M. A. and Bakar, F. D. A. (2016) Production of an oligosaccharide-specific cellobiohydrolase from the thermophilic fungus Thielavia terrestris. Biotechnology Letters, 38 (5). pp. 825-832. ISSN 0141-5492

Yahya, K. and Boussabaine, H. and Alzaed, A. N. (2016) Using life cycle assessment for estimating environmental impacts and eco-costs from the metal waste in the construction industry. Management of Environmental Quality, 27 (2). pp. 227-244. ISSN 1477-7835

Yahya, N. Y. and Ngadi, N. and Jusoh, M. and Halim, N. A. A. (2016) Characterization and parametric study of mesoporous calcium titanate catalyst for transesterification of waste cooking oil into biodiesel. Energy Conversion and Management, 129 . pp. 275-283. ISSN 0196-8904

Yakubu, Mahadi Lawan and Yusop, Zulkifl and Fulazzaky, Mohamad Ali (2016) The influence of rain intensity on raindrop diameter and the kinetics of tropical rainfall: case study of Skudai, Malaysia. Hydrological Sciences Journal, 61 (5). pp. 944-951. ISSN 0262-6667

Yang, X. and Borse, R. and Satvat, N. (2016) MOCUM solutions and sensitivity study for C5G7 benchmark. Annals of Nuclear Energy, 96 . pp. 242-248. ISSN 0306-4549

Yusof, N. A. and Hashim, N. H. F. and Beddoe, T. and Mahadi, N. M. and Illias, R. M. and Bakar, F. D. A. and Murad, A. M. A. (2016) Thermotolerance and molecular chaperone function of an SGT1-like protein from the psychrophilic yeast, Glaciozyma Antartica. Cell Stress and Chaperones, 21 (4). pp. 707-715. ISSN 1355-8145

Yusof, Norhaniza and Rana, Dipak and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2016) Microstructure of polyacrylonitrile-based activated carbon fibers prepared from solvent-free coagulation process. Journal of Applied Research and Technology, 14 (1). pp. 54-61. ISSN 1665-6423

Yusuf, Mohammed and Ali Khan, Moonis and Abdullah, Ezzat Chan and Elfghi, M. and Hosomi, Masaaki and Terada, Akihiko and Riya, Shohei and Ahmad, Areeba (2016) Dodecyl sulfate chain anchored mesoporous graphene: synthesis and application to sequester heavy metal ions from aqueous phase. Chemical Engineering Journal, 304 . pp. 431-439. ISSN 1385-8947

Zahan, K. A. and Pae, N. and Muhamad, I. I. (2016) An evaluation of fermentation period and discs rotation speed of rotary discs reactor for bacterial cellulose production. Sains Malaysiana, 45 (3). pp. 393-400. ISSN 0126-6039

Zahri, K. and Wong, K. C. and Goh, P. S. and Ismail, A. F. (2016) Graphene oxide/polysulfone hollow fiber mixed matrix membranes for gas separation. RSC Advances, 6 (92). pp. 89130-89139. ISSN 2046-2069

Zaine, M. Z. and Mustafa, M. F. and Ibrahim, K. A. and Ibrahim, N. and Abd. Hamid, M. K. (2016) Sustainable energy efficiency distillation columns sequence design of aromatic separation unit. Jurnal Teknologi, 78 (6-12). pp. 101-105. ISSN 0127-9696

Zaini, M. A. A. and Alias, N. and Yunus, M. A. C. (2016) Bio-polishing sludge adsorbents for dye removal. Polish Journal of Chemical Technology, 18 (4). pp. 15-21. ISSN 1509-8117

Zainol, M. M. and Asmadi, M. and Amin, N. A. S. and Ahmad, K. (2016) Carbon cryogel microsphere for ethyl levulinate production: effect of carbonization temperature and time. Journal of Engineering Science and Technology, 11 (Specia). pp. 108-121. ISSN 1823-4690

Book Section

Ahmad, M. Z. and Hashim, H. and Yunus, N. A. (2016) Solvent design for post combustion chemical absorption process. In: Computer Aided Chemical Engineering. Elsevier B.V., pp. 1683-1688. ISBN 978-044463428-3

El Enshasy, H. and Malik, K. and Malek, R. A. and Othman, N. Z. and Elsayed, E. A. and Wadaan, M. (2016) Anaerobic probiotics: the key microbes for human health. In: Advances in Biochemical Engineering/Biotechnology. Springer Science and Business Media Deutschland GmbH, pp. 397-432. ISBN 07246145

Hasan, M. and Hassan, A. and Zakaria, Z. (2016) Poly(lactic acid) hybrid green composites. In: Biodegradable Green Composites. wiley, pp. 149-166. ISBN 978-111891106-8

Zakaria, M. and Zaini, M. A. A. and Che Yunus, M. A. (2016) Sludge ash for the remediation of water laden with CU(II) and PB(II). In: Heavy Metals: Sources, Toxicity and Remediation Techniques. Nova Science Publishers, Inc., pp. 269-288. ISBN 978-163484766-7

Conference or Workshop Item

Abdul Fattah, S. S. and Mohamed, R. and Jahim, J. M. and Illias, R. M. and Abu Bakar, F. D. and Murad, A. M. A. (2016) Commercial cellulases and hemicellulase performance towards oil palm empty fruit bunch (OPEFB) hydrolysis. In: 2016 Postgraduate Colloquium of the Universiti Kebangsaan Malaysia, Faculty of Science and Technology, UKM FST 2016, 13 April 2016 through 14 April 2016, Faculty of Science and Technology, Universiti Kebangsaan MalaysiaSelangor; Malaysia.

Abdullah, Z. B. and Razani, W. A. S. S. B. W. M. and Chyang, P. J. and Hisam, R. B. H. (2016) The cytotoxicity effect of Nephelium lappaceum leaves extract on human cancer cells. In: 2016 International Conference on Applied System Innovation, IEEE ICASI 2016, 28 May 2016 through 1 June 2016, Okinawa Convention Center4-3-1 MashikiGinowan City Okinawa; Japan.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2016) An industrial case study application in synthesizing a feasible heat exchanger network. In: Regional Conference on Chemical Engineering 2016, 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abd. Manan, Zainuddin (2016) Sensitivity analysis of industrial heat exchanger network design. In: Regional Conference on Chemical Engineering 2016, 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Ahmad, M. S. and Mohamad, Z. and Ratnam, C. T. and Rudin, A. K. (2016) Tensile properties and morphology of irradiated EVA/ENR-50/sepiolite nanocomposites. In: 24th Scientific Conference of the Microscopy Society Malaysia, SCMSM 2015, 2-4 Dec 2015, Melaka, Malaysia.

Ahmad, S. I. and Hashim, H. and Hassim, M. H. and Muis, Z. A. (2016) Inherent safety assessment of biodiesel production: flammability parameter. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Ahmad Nasir, Izzah Athirah and Alis, Adilah and Mohamad, Zurina and A. Majid, Rohah (2016) Rigid polyurethane foam-based palm oil polyol/polyepropylene glycol blend. In: International of Global Network for Innovative Technology (IGNITE 2016), 27-29 Jan, 2016, Pulau Pinang, Malaysia.

Alias, N. E. and Hassan, R. and Johari, Z. (2016) Statistical variability in n-channel SOI FinFET in the presence of random discrete dopant. In: 12th IEEE International Conference on Semiconductor Electronics, ICSE 2016, 17 August 2016 through 19 August 2016, Kuala Lumpur; Malaysia.

Amran, N. A. and Jusoh, M. (2016) Effect of coolant temperature and circulation flowrate on the performance of a vertical finned crystallizer. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Asli, Umi Aisah and Sadikin, Aziatul Niza and Md. Kasmani, Rafiziana and Rasit Ali, Roshafima (2016) Impak program mobiliti terhadap pembangunan diri mahasiswa. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan (NASDEC 2016), 28-30 Nov, 2016, Johor Bahru, Malaysia.

Aziz, A. H. A. and Yunus, M. A. C. and Arsad, N. H. and Lee, N. Y. and Idham, Z. and Razak, A. Q. A. (2016) Optimization of supercritical carbon dioxide extraction of piper betel linn leaves oil and total phenolic content. In: 2nd International Conference on Chemical Engineering, ICCE 2016, 26 October 2016 through 27 October 2016, Indonesia.

Barrera-Medrano, M. E. and Newton, P. and Martinez-Botas, R. and Rajoo, S. and Tomita, I. and Ibaraki, S. (2016) Effect of exit pressure pulsation on the performance and stability limit of a turbocharger centrifugal compressor. In: ASME Turbo Expo 2016: Turbomachinery Technical Conference and Exposition, GT 2016, 13-17 June 2016, Seoul, South Korea.

Chong, K. C. and Lai, S. O. and Thiam, H. S. and Lau, W. J. (2016) The progress of polymeric membrane separation technique in O2/N2 separation. In: 2nd International Conference on Science and Engineering of Materials, ICoSEM 2015, 16-18 Nov 2015, Kuala Lumpur, Malaysia.

Chong, K. C. and Lim, C. E. and Lai, S. O. and Lau, W. J. (2016) Effect of ethylene glycol on polymeric membrane fabrication for membrane distillation. In: 2nd International Conference on Science and Engineering of Materials, ICoSEM 2015, 16-18 Nov 2015, Kuala Lumpur, Malaysia.

D. Hamza, Usman and Nasri, Noor Shawal and Muhammad, Jibril and Abdul Majid, Zulkifli (2016) Natural gas adsorption on sustainable biomass derived activated carbon: a mini-review. In: 3rd International Conference on Chemical and Biological Sciences, 23-25 Mar, 2016, Amsterdam. Netherlands.

El Enshasy, H. A. and Johari Masri, M. H. and Malek, R. A. and Othman, N. Z. and Leng, O. M. and Aziz, R. (2016) Bioprocess development for pleuran production by pleurotus ostreatus using submerged cultivation system in semi-industrial scale. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Hammuda Aluhwal, Omar Kalifa and Junin, Radzuan and Nasri, Noor Shawal (2016) Surfactant alternating carbonated water (SACW) is a new process forenhanced oil recovery. In: International Conference on Science, Engineering, Management and Social Science (ICSEMSS 2016), 2016, Skudai, Johor.

Hamza, U. D. and Nasri, N. S. and Mohammed, J. and Majid, Z. A. (2016) Natural gas adsorption on biomass derived activated carbons: A mini review. In: 3rd International Conference on Chemical and Biological Sciences, ICCBS 2016, 23 March 2016 through 25 March 2016, Netherlands.

Hanapi, S. Z. and Hatti-Kaul, R. and Aziz, R. and Othman, N. Z. and El-Enshasy, H. A. (2016) Screening for ligninolytic enzyme production by white rot fungi from Malaysia using different medium. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Hashim, F. S. and Yussof, H. W. and Zahari, M. A. K. M. and Illias, R. M. and Rahman, R. A. (2016) A factorial analysis study on enzymatic hydrolysis of fiber pressed oil palm frond for bioethanol production. In: 2nd International Conference on Advances in Renewable Energy and Technologies, ICARET 2016, 23 February 2016 through 25 February 2016, Putrajaya; Malaysia.

Hashim, Z. and Fukusaki, E. (2016) Metabolomics-based prediction models of yeast strains for screening of metabolites contributing to ethanol stress tolerance. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Hashim, Z. and Lanyau, T. A. and Farid, M. F. A. and Kassim, M. S. and Azhar, N. S. (2016) Fundamental approaches for analysis thermal hydraulic parameter for PUSPATI Research Reactor. In: 6th International Nuclear Science, Technology and Engineering Conference 2015, iNuSTEC 2015, 17-19 Aug 2015, Negeri Sembilan, Malaysia.

Ismail, A. R. and Wan Sulaiman, W. R. and Jaafar, M. Z. and Ismail, I. and Sabu Hera, E. (2016) Nanoparticles performance as fluid loss additives in water based drilling fluids. In: 4th International Conference on Nano and Materials Engineering, ICNME 2016, 7-8 April 2016, Bali Island, Indonesia.

Johari, K. and Saman, N. and Tien, S. S. and Chin, C. S. and Kong, H. and Mat, H. (2016) Removal of elemental mercury by coconut pith char adsorbents. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Junin, Radzuan and Abang Hasbollah, Dayang Zulaika (2016) CO2 storage capacity assessment of deep saline aquifers in Malaysia. In: 18th International Conference on Oil Reserves and Production, 17-18 Oct, 2016, London, United Kingdom.

Junin, Radzuan and Nasri, Noor Shawal and Hammuda Aluhwal, Omar Kalifa (2016) Effect of CO2 content, reservoir temperature and pressure of SACW on oil recovery. In: International Conference on Science, Engineering, Management and Social Science (INSEMSS 2016), 06-OCT-16, MALAYSIAUTM JB.

Lee, Ming Yang and Hashim, Haslenda and Liu, Wen Hui and Ho, Wai Shin (2016) Extended electric system cascade analysis (ESCA) for a carbon constraint energy generation system. In: The 8th International Conference on Applied Energy (CAE2016), 2016.

Liu, Wen Hui and Wan Alwi, Sharifah Rafidah and Hashim, Haslenda and Ab Muis, Zarina (2016) Optimal design and sizing of integrated centralized and decentralized energy systems. In: 8th International Conference on Applied Energy (ICAE2016), 08-11 Oct, 2016, Beijing, China.

M. Sultan Suhai Buddeen, Mumtaz and Abdul Hamid, Mariani and Md. Salleh, Liza (2016) Effect of storage temperature on face serum stability. In: 6th International Conference on Biotechnology for the Wellness Industry 2016 (ICBWI 2016), 16-17 Aug, 2016, Melaka, Malaysia.

Malek, R. A. and Malek, M. K. and Othman, N. Z. and Ramli, S. and Aziz, R. and El Enshasy, H. A. (2016) Optimization of production medium for high cell mass production and the functional characteristics study of bifidobacterium longum WICC B34. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Mazhorova, A. and Clerici, M. and Peccianti, M. and Ho, S. P. and Razzari, L. and Jestin, Y. and Pasquazi, A. and Tomasino, A. and Markov, A. and Piccoli, R. and Busacca, A. and Ali, J. and Morandotti, R. (2016) Asymmetric dual-grating micro-slit configuration for broadband solid state coherent detection of THz pulses. In: Conference on Lasers and Electro-Optics, CLEO 2016, 5 June 2016 through 10 June 2016, San Jose; United States.

Mohd., S. M. and Wan, R. W. S. and Abdul, R. I. and Mohd., Z. J. and Issham, I. (2016) Wettability alteration of dolomite rock using nanofluids for enhanced oil recovery. In: 4th International Conference on Nano and Materials Engineering, ICNME 2016, 7-8 April 2016, Bali Island, Indonesia.

Mohd. Nor, Shadiah Husna and Ahmad, Arshad (2016) A framework for risk-based assessment using loss functions. In: Conference on Emerging Energy and Process Technology, 07-8 Dec, 2016, Port Dickson, Negeri Sembilan, Malaysia.

Mohtar, Aminullah and Wai, Shin Ho and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Peng, Yen Liew (2016) Palm oil mill effluent (POME) biogas off-site utilization Malaysia specification and legislation. In: 2nd International Conference of Low Carbon Asia (ICLCA2016), 23 Nov, 2016.

Nabgan, Bahador and Tuan Abdullah, Tuan Amran and Nabgan, Walid and Tahir, Muhammad (2016) Efect of pellet size on the steam reforming of phenol-pet waste to hydrogen producton over Ni/La-promoted Al2O3 catalyst. In: 5th Conference of Energy Emerging and Process Technology 2016, 2016, Negeri Sembilan, Malaysia.

Nabgan, Bahador and Tuan Abdullah, Tuan Amran and Nabgan, Walid and Tahir, Muhammad (2016) Steam reforming of phenol-PET solution over Ni/Al2O3 catalyst for hydrogen production. In: International Conference on Catalysis 2016, 2016, Skudai, Johor.

Nabgan, Walid and Tuan Abdullah, Tuan Amran and Mat, Ramli and Nabgan, Bahador and Alir, Afizah and Gambo, Yahya (2016) Synthesis and characterizaton of a novel bimetallic Ni-Co/Zro2 nanostructure and microstructure for steam reforming of phenol. In: 5th Conference of Emerging Energy and Process Technology, 2016, Negeri Sembilan, Malaysia.

Norodin, N. S. M. and Salleh, L. M. and Hartati, Hartati and Mustafa, N. M. (2016) Supercritical carbon dioxide (SC-CO2) extraction of essential oil from Swietenia mahagoni seeds. In: 2nd International Conference on Chemical Engineering, ICCE 2016, 26 October 2016 through 27 October 2016, Indonesia.

Othman, F. E. C. and Yusof, N. and Jaafar, J. and Ismail, A. F. and Hasbullah, H. and Abdullah, N. and Ismail, M. S. (2016) Preparation and characterization of Polyacrylonitrile/ Manganese Dioxides- based Carbon Nanofibers via electrospinning proce. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Othman, N. and Noah, N. F. M. and Poh, K. W. and Yi, O. Z. (2016) High performance of chromium recovery from aqueous waste solution using mixture of palm-oil in emulsion liquid membrane. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kedah, Malaysia.

Othman, N. Z. and Ramli, S. and Malek, R. A. and Sarmidi, M. R. and Hatti-Kaul, R. and El Enshasy, H. A. (2016) Bioprocess strategies to optimize thermostable phytase production by Escherichia coli B121 (DE3) when induced with lactose. In: International Congress on Energy 2016, ICE 2016 - Topical Conference at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Rabat, N. E. and Hashim, S. and Majid, R. A. (2016) Effect of different monomers on water retention properties of slow release fertilizer hydrogel. In: 4th International Conference on Process Engineering and Advanced Materials, ICPEAM 2016, 15-17 Aug 2016, Kuala Lumpur, Malaysia.

Romainodin, Ayuni and Ebrahim, Abouzari Lotf and El-Sayed Nasef, Mohamed Mahmoud and Ahmad, Arshad and Md. Sha'rani, Saidatul Sophia (2016) Layer by layer membrane for vanadium redox battery. In: Conference on Emerging Energy and Process Technology, 07-8 Dec, 2016, Port Dickson, Negeri Sembilan, Malaysia.

Samani, Mariam and Abdul Hamid, Mariani and Abd. Rashid, Siti Nor Azlina (2016) Kinetic study of solid to solvent ratio and duration of bath and probe sonication to yield and phenolic content of phaleria macrocarpa fruit extract. In: 6th International Conference on Biotechnology for the Wellness Industry, 16-17 Aug 2016, Melaka, Malaysia.

Subramaniam, M. N. and Goh, P. S. and Ismail, A. F. and Lau, W. J. (2016) Effect of titania nanotubes on the flux and separation performance of polyethersulfone membranes. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Taher, Z. M. and Foster, T. and Gray, D. (2016) Influence of seed pre-soaking and oil body washing regime on the physical quality of the final suspension. In: Food, Pharmaceutical and Bioengineering Division 2016 - Core Programming Area at the 2016 AIChE Annual Meeting, 13-18 Nov 2016, San Francisco, United States.

Tengku Mohd, T. A. and Baco, J. and Bakar, N. F. A. and Jaafar, M. Z. (2016) Effects of particle shape and size on nanofluid properties for potential Enhanced Oil Recovery (EOR). In: 2016 5th International Conference on Chemical and Process Engineering, ICCPE 2016, 23 May 2016 through 25 May 2016, South Korea.

Tengku Mohd, T. A. and Jaafar, M. Z. and Ali Rasol, A. A. and Hamid, M. F. (2016) Measurement of streaming potential in downhole application: an insight for enhanced oil recovery monitoring. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Sarawak; Malaysia.

Weigl, J. D. and Henz, M. and Inayati, Inayati and Saidi, H. (2016) Converted battery-powered electric motorcycle and hydrogen fuel cell-powered electric motorcycle in South East Asia: development and performance test. In: 2015 Joint International Conference on Electric Vehicular Technology, ICEVT 2015 and Industrial, Mechanical, Electrical and Chemical Engineering, IMECE 2015, 4 November 2015 through 5 November 2015, Indonesia.

Yacob, Mohd. Najib and Hassim, Mimi Haryani (2016) Delphi-AHP based methodology for selecting causal factors of marine transportation accidents. In: 9th Regional Conference on Chemical Engineering (RCCHE-2016), 21-22 Nov, 2016, Kuala Lumpur, Malaysia.

Yang, X. and Borse, R. and Satvat, N. (2016) Mocum code verification and sensibility study using C5G7 benchmark. In: 2016 24th International Conference on Nuclear Engineering, ICONE 2016, 26 - 30 June 2016, Charlotte, United States.

Yang, X. and Borse, R. and Satvat, N. (2016) Mocum code verification and sensibility study using C5G7 benchmark. In: 2016 24th International Conference on Nuclear Engineering, ICONE 2016, 26 - 30 June 2016, Charlotte, United States.

Zahri, K. and Goh, P. S. and Ismail, A. F. (2016) The incorporation of graphene oxide into polysulfone mixed matrix membrane for CO2/CH4 separation. In: 5th International Conference on Chemical and Bioprocess Engineering, ICCBPE 2015, 9 December 2015 through 12 December 2015, Sabah; Malaysia.

Thesis

David, Adekoya Oluwatobi (2016) Photoreduction of carbon dioxide to methanol using copper modified carbon nitride and titanium dioxide nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Lim, Yu Han (2016) Removal of acetaminophen from aqueous solution by using activated carbon derived from spent tea leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Misbah, Maznah (2016) In vitro release of enzymes and surfaces morphology of enzyme coated pelleted goat feed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Lee, Nicholas Yow Jeng (2016) Removal of aspirin in aqueous using activated carbon derived from spent tea leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abd. Rahman, Noor Hidayah (2016) Xylitol production of recombinant escherichia coli immobilized on multi walled carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Manas, Nor Hasmaliana (2016) Reaction control and protein engineering of bacillus lehensis G1 maltogenic amylase for higher malto-oligosaccharide synthesis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abu Bakar, Norshamiza (2016) Alpha mangostin optimized extraction by supercritical carbon dioxide technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Che Man, Rohaida (2016) Improvement of cyclodextrin glucanotranferase excretion and cell viability of recombinant Escherichia Coli immobilized on hollow fiber membrane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Md. Norodin, Nur Salsabila (2016) Optimization of β-sitosterol from SWIETENIA MAHAGONI seeds extract using supercritical carbon dioxide (SC-CO2) extraction and its anti-diabetic activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ab. Hamid, Farah Hanim (2016) The performance of progressive freeze concentration for water purification using rotating cylindrical crystalliser with anti-supercooling holes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abbasi, Ali (2016) Amine-bearing electrospun nanfibrous adsorbent using radiation induced grafting for carbon dioxide capturing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Alsaheb, Ramzi Ata (2016) Optimization of medium and cultivation conditions for D-lactic acid production using cassva starch. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Halim, Khairunnisa (2016) Two-stage anaerobic process coupled with single-stage aerobic process for raw palm oil mill effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Rahman, Anis Farhana (2016) Synthesis of titanium dioxide supported on mesostructured silica nanoparticles for photocatalytic decolourization of congo red. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdul Razak, Nor Erma Shuhadah (2016) Synthesis and characterization of hydroxyl terminated epoxidized natural rubber as a binder for solid rocket propellant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Norfazliana (2016) Preparation and characterization of dual layer lanthanum strontium cobalt ferrite/alumina hollow fibre membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abu Bakar, Siti Maryam (2016) Environmental sustainability index for palm oil mill industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abubakar, Umar Isah (2016) Optimization and kinetics of green pressurized-liquid extraction for andrographolide from Andrographis Paniculata. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Mohd. Azlan (2016) Anaerobic digestion of crude glycerol for biohydrogen production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Muhammad Akmal (2016) Preparation and characterization of polylactic acid / modified rock stone / strach biocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad, Siti Halimah (2016) Structural study of co-extruded dual-layer hollow fibre for micro-tubular solid oxide fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmed, Nor Rashidah (2016) Optimization of extraction and spray drying parameters on ficus deltoidea extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Aris, Noor Fatheyah (2016) Characterization and properties of semi-biodegradable low density polyethylene/palm pressed fibre biocomposite film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ayub, Nur Farizah (2016) Novel UV led photopolymerization and characterization for polyacrylamide and poly (n-isopropylacrylamide) hydrogels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Azmi, Rabiah Assyamiah (2016) Polyvinyl alcohol-crosslinked polyvinylidene fluoride hollow fiber membrances for crude palm oil refining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Abdul Razak, Noorzilawani (2016) Mechanical, thermal, morphological and flammability properties of halloysite nanotube reinforced compatibilized poly(ethylene terephthalate) / polypropylene nanocomosities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Hassan, Che Hafizan (2016) Environmental degradation assessment of biodiesel production using life cycle analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Wan Mohd. Amil, Che Wan Nabihan (2016) Synthesis and characterization of adsorbent derived from pandan leaves for methylene blue removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dahli, Farah Nuruljannah (2016) Synthesis and mechanical properties of conductive composite polylactic acid/polyaniline scaffold for potential tissue engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Fan, Yee Van (2016) Effectiveness of microbial inoculants from tempeh and tapai in home scale composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Gan, Siaw Chin (2016) In vitro permeation and skin retention of alpha-mangostin proniosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Gharibi, Abdoullatif (2016) Development of an ultra-lightweight coconut shell-based proppant for hydraulic fracturing of subterranean formations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Jamaludin, Nurhikmah (2016) Anti-proliferative activity of crude and fractionated extract of labisia pumila on human prostate cancer cell lines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Junoh, Hazlina (2016) Fabrication of nanocomposite membrane via combined electrospinning and casting technique for direct methanol fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kadhim, Fadhil Sarhan (2016) Cementation factor and carbonate formation properties correlation from well logs data for nasiriya field. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Yun Fook (2016) Effect of design peak flow factor to the capital cost of sewerage reticulation in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Liew, Weng Hui (2016) Inherent safety health environment and economic assessment for sustainable chemical process design: Biodiesel case study. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ling, Kah Ngiek (2016) Characterization of thermoplastic sago starch/novolak and thermoplastic sago starch/novolak/polyvinyl alcohol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mamat, Siti Nur Hana (2016) Physicochemical and antibacterial properties of cotton fabric treated with chitosan-tripolyphosphate nanoparticles and lauric acid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mansor, Azmi Fadziyana (2016) In-situ entrapment of laccase in mesoporous silica microparticles for degradation of oxyteracycline. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mansur, Sumarni (2016) Preparation and characterisation of biocompatible polyethersulfone-based hollow fibre membrane for haemodialysis application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Wahi, Nurhazerin (2016) Optimization of biodegradable sago-based film formulation for food packaging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad Nor, Nor Azureen (2016) Polyvinylidene fluoride membrane coated with titanium dioxide nanofibers for photocatalytic membrane process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammadi Ashnani, Mohammad Hossein (2016) A decision support system for sustainable development of biodiesel industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Mokhtar, Mutahharah (2016) Establishment of emission characteristics, emission factors and health risk assessment from a coal-fired power plant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhidin, Fadzillah (2016) Characterization and optimization of biodegradable chitosan-sago based films for food packaging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhmed, Siti Aishah (2016) Methylene blue adsorption onto crosslinked sago starch. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mustapha, Siti Noor Hidayah (2016) Mechanical, thermal and morphological studies of epoxidized palm oil / unsaturated polyester / montmorillonite composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nor Azillah Fatimah, Nor Azillah Fatimah (2016) Preparation of radiation grafted kenaf absorbent for aluminium removal via chemical vapour deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nordin, Norsuhadat (2016) Development of ultrasonic tomographic instrumentation system monitoring flaws on pipeline. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Pagarra, Halifah (2016) Penghasilan ekso-poligalakturonase oleh aspergillus niger daripada ekstrak pektin daun nephrolepis biserrata dalam fermentasi keadaan pepejal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Paiman, Syafikah Huda (2016) Structural characterization of asymmetric yttria stabilized zirconia hollow fibre membrance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Raja Sulong, Raja Safazliana (2016) The efficiency of niosome in entrapment of Andrographis paniculata extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Salleh, Muhammad Taufiq (2016) Stability of sulfonated poly ether ether ketone nanocomposite membrane for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Saman, Norasikin (2016) Modifications of coconut pith as mercury adsorbents for industrial applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Samsuri, Shafirah (2016) Development of a spiral finned crystallizer for progressive freeze concentration process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Sanusi, Nurhasikin (2016) Properties of modified calcium carbonate/natural fiber filled polyethylene hybrid foam composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shaari, Norsalliana (2016) Synthesis and characterization of oil palm trunk hemicellulose derivatives for coagulation/flocculation removal of cationic dyes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Soib, Husnul Hanani (2016) Prostate cancer cell inhibition by ethanolic fraction of Ficus deltoidea var. kunstleri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Ying Fang (2016) Hair growth and hair tanning activities of mangosteen pericarp water extract on hair dermal papilla cells. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Then, Kek Hoe (2016) Improving banana and oil palm seedlings growth using indigenous nitrogen fixing and phospate solubilizing bacteria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Usman Aminu, Maryam (2016) Biodiesel production from oleic acid and palm fatty acid distillate/ oleic acid using sulfonated carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wan Tajulruddin, Wan Nurhayati (2016) Synthesis and characterization of epoxidized palm oil hydogel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wan Tajulruddin, Wan Nurhayati (2016) Synthesis and characterization of epoxidized palm oil hydrogel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Waziri, Jibrin (2016) Esterification of oleic acid and palm fatty acid distillate-oleic acid blend using sulfated titania-silica catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Wong, Syie Luing (2016) Cracking of low density polyethylene dissolved in benzene to liquid fuels using zeolite-based catalysts. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yusoff, Nor Aida (2016) Synthesis and characterization of waste newspaper cellulose based flocculant for water treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zaini, Nabilah (2016) Amine–functionalized kenaf as carbon dioxide adsorbent in pressure swing adsorption system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Zainol Abidin, Muhammad Nidzhom (2016) Polyethersulfone/multi-walled carbon nanotubes mixed matrix membranes for bovine serum albumin removal and biocompatibility studies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zukefli, Siti Najihah (2016) Extraction and identification of proteins from edible bird’s nest. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.