Items where Year is 2007

A

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Tamin, Mohd. Nasir and Lee, Faisal Abidin (2007) Interface micromotion failure simulation of cementless hip prosthesis. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Kadir, Mohammad Rafiq and Che Iberahim, Nazman and Ong, Rui Ying (2007) Finite element analysis of a total ankle arthroplasty during the stance phase of gait. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 2007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Kamsah, Nazri and Ong, Rui Ying and Salim, Muhsin (2007) Interfacial conditions of cementless acetabular cup prostheses under physiological load. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 2007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Ong, Rui Ying (2007) Mechanical behaviour of the mandible after rigid fixation of mandibular angle fractures. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammad Rafiq and Osman, Kahar and Taib, Iskhrizat (2007) Finite element of expandable intravascular stent used in treatment of aneurysm. In: 2nd European Conference On Antennas And Propagation, December 3-5, 007, Universiti Malaya, Kuala Lumpur.

Abdul Kadir, Mohammed Rafiq and Hansen, Ulrich N. (2007) The effect of physiological load configuration on interface micromotion in cementless femoral stems. Jurnal Mekanikal (23). pp. 50-61. ISSN 0127-3396

Abdul Kadir, Mohammed Rafiq and Mohd. Idris, Mohd. Norshahid and Che Ibrahim, Nazman (2007) Evaluation of load transfer characteristics of double-taper interlocking abutment for prosthetic dentistry. In: World Engineering Congress 2007, 2007, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Syahrom, Ardiyansyah and Rais Yusof, Mohd. Azrul (2007) Microstructural damage of cancellous bone under uniaxial compression. In: International Conference of Ergonomics 2007 (ICE 2007), December 3-5, 007, Universiti Malaya, Kuala Lumpur.

Abdul Malick, Sharqiyah (2007) Organic and inorganic passivation performance on electroless nickel (LP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul-Kadir, Mohammed Rafiq and Hansen, Ulrich N. (2007) Incorporation of interference fit and cyclic loading in simulation algorithm for better prediction of micromotion of femoral stems. Jurnal Teknologi, 47 (A). pp. 19-34. ISSN 0127-9696

Abu, Risal and Md. Tap, Masine (2007) Attribute based feature recognition for machining features. Jurnal Teknologi , 46 (A). pp. 87-103. ISSN 2180-3722

Abu Bakar, Abd. Rahim and Jamaluddin, Effandy and Leong, Chin Yin (2007) An experimental investigation into noise and vibration of an automotive wiper. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture, 2007, Bangi.

Abu Hassan, Shukur (2007) Mechanical performance of carbon fibre reinforced vinyl ester composite plate bonded concrete exposed to tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Senina, Alseddeg A. S. (2007) Containerization in libya : a misurata port case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, S. N. A. S. and Hashim, J. and Ghazali, M. I. (2007) Effect of porosity on tensile properties of cast particle reinforced MMC. Journal of Composite Materials, 41 (5). pp. 575-589. ISSN 0021-9983

Ahmad, Md. Fauzi and Mohd. Yusof, Sha'ri (2007) Comparative study of TQM practices Between Japanese and Non-Japanese based electrical and electronics companies in Malaysia-a survey. In: World Engineering Congress 2007, 2007, Penang.

Ahmad, Md. Fauzi and Mohd. Yusof, Sha'ri and Mohd. Yusof, Noordin (2007) Comparative study of quality practices between Japanese and non-Japanese based electrical and electronics companies in Malaysia: a survey. Jurnal Teknologi, 47 (A). pp. 75-89. ISSN 0127-9696 (Print); 2180-3722 (Electronics)

Ahmad, Robiah and Jamaluddin, Hishamuddin and Hussain, Mohd. Azlan (2007) Model structure selection for discrete-time systems using memetic algorithm. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 149-186. ISBN 978-983-52-0545-3

Ahmad @ Manap, Mohd. Rizal (2007) Simulation and experimental analysis of an active vehicle suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Fitriadhy, Ahmad Fitriadhy (2007) Seakeeping evaluation of semi-swath vessel in head-seas using time domain simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Mubarak and Hamzah, Esah and Mohd Toff, Mohd Radzi (2007) Deposition and characterization of TiN-coated steels at various N 2 gas flow rates with constant etching by using capvd technique. Surface Review and Letters, 14 (1). pp. 93-100. ISSN 0218-625X

Ali, Mubarak (2007) Influence of processing parameters on the properties of tin coatings deposited on tool steels using cathodic arc physical vapour deposition technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Amran and Ahmad Nor, Nor Azlan and Said, Mohd Radzai (2007) The behaviour of square sandwich panel Part I: under static loading. Jurnal Teknologi, 47 (A). pp. 1-18. ISSN 0127-9696

Amrin, Astuty and Hamzah, Esah and Mohd. Badri, Nurfashahidayu and Hamzah, Hafida (2007) High temperature cyclic oxidation of Ti-Al based intermetallic in static laboratory air. In: 2nd National Metallurgical Conference 2007, 26-27th November 2007, The Puteri Pan Pacific, Johor Bahru.

Aspar, Mohd. Hanip (2007) Tahap pengamalan pengurusan keselamatan dalam industri kecil dan sederhana. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Asral, Asral and Md. Sheriff , Jamaluddin and Osman, Kahar (2007) Particle image velocimetry (PIV) measurements of flow structure downstream of a 2-D bluff body with the effect of wavy surface. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 135-162. ISBN 978-983-52-0547-7

Awang, Dzulkifli (2007) Comparison between 'project-oriented' learning and problem-based learning (PBL) in design subject. In: 2nd Regional Conference on Engineering Education, 2007, Johor Bahru.

Ayob, Amran and Elbasheer, M. Kabashi (2007) Optimum autofrettage pressure in thick cylinders. Jurnal Mekanikal (24). pp. 1-14. ISSN 0127-3396

B

Basaruddin, Khairul Salleh (2007) Ratchetting of composite pipes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Belova, I. V. and Ochsner, Andreas and Muthubandara, N. and Murch, G. E. (2007) Modelling of oxygen diffusion and segregation at interfaces in Ag-MgO composites. Defect and Diffusion Forum, 266 . pp. 29-38. ISSN 1012-0386

Belova, Irini V. and Murch, Graeme E. and Fiedler, Thomas and Ochsner, Andreas (2007) The lattice Monte Carlo method for solving phenomenological mass and heat transport problem. Diffusion Fundamentals, 4 . pp. 1-23. ISSN 1862-4138

C

Che Omar, Muhammad Budiman (2007) Modeling of human motion through motion captured data using non-linear identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Omar, Muhammad Budiman (2007) Modeling of human motion through motion captured data using non-liner identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidek, Nor Azwadi and Tanahashi, T. and Noguchi, H. (2007) Simplified finite difference thermal lattice boltzman method. In: The Eighteenth International Symposium on Transport Phenomena, 27-30 Aug. 2007, Daejeon, Korea.

Che Sidik, Nor Azwadi (2007) The development of thermal lattice Boltzmann models in incompressible limit. The development of thermal lattice Boltzmann models in incompressible limit, 3 (2). pp. 193-202.

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2007) Two-phase flow simulation with lattice Boltzmann method. Jurnal Mekanikal (24). pp. 68-79. ISSN 0127-3396

Che Sidik, Nor Azwadi (2007) Numerical simulation of three dimensional natural convection heat transfer. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 103-120. ISBN 978-983-52-0547-7

Che Sidik, Nor Azwadi (2007) Coupled lattice boltzmann with convention numerical methods. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor. ISBN 978-983-52-0547-7

Che Sidik, Nor Azwadi (2007) Theory and application of lattice Boltzmann numerical method on isothermal fluid flow problem. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 25-36. ISBN 978-983-52-0547-7

Che Sidik, Nor Azwadi and Takahiko, Tanahashi (2007) Three-dimensional thermal lattice boltzman simulation of natural convection in a cubic cavity. International Journal of Modern Physics B, 21 . pp. 87-96. ISSN 0217-9792

Che Zainal Abidin, Nik Mohd Farid (2007) Incorporating design for manufacture and assembly methodologies into the design of a modified spark plug. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cheng, See Yuan and Ghazali, Mohd. Imran and Hassan, Azman and Ismail, Ahmad Fauzi (2007) Heat sealability of laminated films with LLDPE and LDPE as the sealant materials in bar sealing application. Journal of Applied Polymer Science, 104 (6). pp. 3736-3745. ISSN 0021-8995

Chiew, Y. S. and Md Zin, Mohd Zarhamdy and Tawi, K. B. and Ariyono, S. and Supriyo, B. and Ng, W. S. (2007) Performance of proportional control in CVT electro-mechanical clutch. In: The 1st International Conference on Control, Instrumentation and Mechatronics (CIM'07), 28-29 May 2007, Johor Bahru.

Chuan, Chin Wong and Ani, Farid Nasir (2007) The economic evaluation of the production of oil-palm-shell-based phenol. Jurnal Teknologi, 46 (A). pp. 43-52. ISSN 2180-3722

D

Darus, Amer Nordin (2007) Analisis dimensi & similitud dalam mekanik bendalir. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0443–2

E

Effendy, Effendy (2007) Tool wear and tool life performance of TiA1N coated carbide cutting tools when turning XW 42 hardened tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elghariani, Badreddin Giuma S. K. (2007) Transsient analysis of fluid structure interaction in straight pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elshwain, Amad Alddein (2007) A study of lapping parameters to reduce polishing time of optical glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

F

F., Nor Akmal and A., Ourdjini and M. A., Azmah Hanim and I., Siti Aisha and Y. T., Chin (2007) Effect of solder bump size on interfacial reactions during soldering between Pb-free solder and Cu and Ni/Pd/Au surface finishes. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Ferdin Ramly, Edly and Mohd. Yusof, Sha'ri and Mohd. Rohani, Jafri (2007) Manufacturing audit to improve quality performance-a conceptual framework. In: World Engineering Congress 2007, 2007, Penang.

Fiedler, T. and Ochsner, Andreas (2007) Finite element analysis of the temperature dependent conductivity of metallic hollow sphere structures. The International Journal of Multiphysics, 1 (3). pp. 283-289. ISSN 1750-9548

Fiedler, Thomas and Ochsner, Andreas (2007) On the thermal conductivity of adhesively bonded and sintered Hollow Sphere Structures (HSS). Materials Science Forum, 553 . pp. 39-44. ISSN 978-0-87849-438-5

Fiedler, Thomas and Öchsner, Andreas and Grácio, José (2007) Uniaxial elasto-plastic behavior of adhesively bonded Hollow Sphere Structures (HHS) : numerical simulations and experiments. Materials Science Forum, 539 . pp. 1874-1879. ISSN 1662-9752

Fiedler, Thomas and Öchsner, Andreas and Muthubandara, Nilindu and V. Belova, Irina and E. Murch, Graeme (2007) Calculation of the effective thermal conductivity in composites using finite element and Monte Carlo Methods. Materials Science Forum, 553 . pp. 51-56.

G

Gromada, M. and Mishuris, Gennady and Ochsner, A. (2007) Necking in the tensile test. Correction formulae and related error estimation. Archives of Metallurgy and Materials , 52 (2). pp. 231-238. ISSN 1733-3490

H

Hamdan, Zainal Abidin (2007) Enhancing the inventory system for the fleet supply depot, royal Malaysian navy. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Hamzah, E. and Izman, S. and Khoo, C. Y. and Zainal Abidin, N. N. and Tan, M. J. (2007) Effect of machining parameters on Bk-7 optical glass using conventional and rotary ultrasonic machines. In: 2nd International Symposium on Advanced Fluid/Solid Science and Technology in Experimental Mechanics, 2007, Osaka.

Hamzah, Esah and Kanniah, M. and Harun, M. (2007) Creep behavior of as-cast Ti-48Al-2Cr intermetallic alloy for aerospace and automotive applications. Materials and Manufacturing Processes, 22 (7). pp. 793-797. ISSN 1532-2475

Hamzah, Esah and Ong, W.R. and Tamin, Mohd. Nasir (2007) Microstructural, mechanical characterisation and fractography of as-cast ti-al alloy. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Hassan, Adnan and Md. Yusof, Aminah and Omar, Ismail and Tiong, Ong Chee (2007) Towards successful inculcation of generic skills: issues and strategies. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Hussein, Mohamed and Moore, Philip and Jun-Sheng, Pu and Chi-Biu, Wong (2007) Quadrature encoder signal emulation for integrated real-virtual environments and systems. In: International Conference on Intelligent and Advanced Systems 2007. Institute of Electrical and Electronics Engineering (IEEE), pp. 1135-1140. ISBN 978-1-4244-1355-3

Hussein, Mohamed and Moore, Philip and Pu, Jun Sheng and Wong, Chi Biu (2007) Quadrature encoder signal emulation for integrated real-virtual environments and systems. In: International Conference on Intelligent and Advanced Systems 2007, 2007, Kuala Lumpur.

I

Ibrahim, Kamarulzaman (2007) Numerical analysis on thermal performanace of staggered pin-fin assembly. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, A. and Mat Zain, N. and Nordin, M. Y. (2007) Synthesis, characterization and performance of asymmetric polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives. Desalination, 207 . pp. 324-339. ISSN 0011-9164

Idris, Ani and Mat Zain, Norashikin and Noordin, M. Y. (2007) Synthesis, characterization and Performance of Asymmetric Polyethersulfone (PES) ultrafiltration membranes with polyethylene glycol of different molecular weights as additives. Desalination, 207 . pp. 324-339. ISSN 0011-9164

Idris, Siti rabiatull aisha and Ourdjini, A. and Osman, Saliza (2007) Study on interfacial reaction between lead-free solders and alternative surface finishes. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Isa, Mohd. Akmal (2007) Development of ceramic cutting insert of aluminium oxide (Al2O3) and titanium carbide (TiC) for machining steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2007) Noxious emission reduction from liquid fuel burner via air staging method. Jurnal Mekanikal (24). pp. 40-46. ISSN 0127-3396

Ishak, Idris and Lim, Richard Boon Keat (2007) Introduction to basic sketching & rendering techniques. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0426–5

Ishak, Mohamad Shaiful Ashrul and Abdullah, Hayati and Mohd. Ja'afar, Mohammad Nazri (2007) The effect of staged combustion in reduction of noxious emissions for agricultural residues using a fluidized bed combustor. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Crowne Plaza Riverside Hotel, Kuching, Sarawak,.

Islam, Mohammad Rafiqul and Ibn Awal, Zobair and Hoque, Md. Mazharul (2007) Marine vehicle accident characteristics in bangladesh: study on collision type accidents. In: Proceedings of the International Conference on Mechanical Engineering 2007 (ICME 2007), December 30,2007-January 1, 2008, Dhaka, Bangladesh.

Islam, Mohammad Rafiqul and Ibn Awal, Zobair and Sadiqul Baree, M. and Maimun, Adi (2007) Development of a mathematical model for analysis on ship collision dynamics. In: Proceedings of the 7th International Conference on Mechanical Engineering (ICME 2007), 29-31 December 2007, Dhaka.

Ismail, Mohamad Hafiz (2007) A computational simulation of rotor-fuselage flow interaction in hovering and forward flight. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Mohammad and M. Noor, Norhazilan and Hamzah, Esah (2007) Corrosion behaviour of dual-phase and galvanized steel in concrete. In: The 1st International Conference of European Asian Civil Engineering Forum, 2007, Indonesia.

Izman, S. and Venkatesh, V. C. (2007) Gelling of chips during vertical surface diamond grinding of BK7 glass. Journal of Materials Processing Technology, 185 . pp. 178-183. ISSN 0924-0136

J

Jackson, M. J. and Khangar, A. and Chen, X. and Robinson, G. M. and Venkateshd, V. C. and Dahotreb, N. B. (2007) Laser cleaning and dressing of vitrified grinding wheels. Journal of Materials Processing Technology, 185 (30). pp. 17-23.

Jahan Abadi, Hossein and Kazi, Suhail and Mailah, Musa and Mohd. Zain, Mohd. Zarhamdy (2007) Robust motion control of human-like arm for precise trajectory tracking task. In: Proceedings of the International Conference on Robotics, Vision, Information and Signal Processing (ROVISP 2007), 2007, Park Royal, Penang.

Jamaluddin, H. and Samad, M. F. A. and Ahmad, R. and Yaacob, M. S. (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 221 . pp. 975-989. ISSN 0959-6518

Jamaluddin, Hishamuddin and Shahrul Ramli, Shafizan (2007) Self-turning PID Control design. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 1-30. ISBN 978-983-52-0545-3

Jamaluddin, Hishamuddin and Abd. Samad, M. F. and Ahmad, Robiah and Yaacob, M. S. (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. Journal of Systems and Control Engineering, 221 (7). pp. 975-989. ISSN 0959-6518

Jamaludin, Khairur Rijal and Abdul Talib, Hayati @ Habibah and Tan, Chiaw Hooi (2007) An improvement to the performance measurement system of the logistics operation. The Journal of The Institution of Engineers Malaysia, 68 (2). pp. 41-46. ISSN 0126-513X

Jayabalan, J. Kulasegaran (2007) Failure analysis of a submersible pump shaft. Masters thesis, Universiti Teknologi Malaysia.

Julait, Johnes (2007) Added resistance of ship due to regular head waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

K

K. Seveen, K. Muniswaran (2007) Experimental study on hard turning of hardened tool steel with coated carbide cutting tools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamarudin, Kamarul Azhar and Ani, Farid Nasir and Mohd. Jaafar, Mohammad Nazri and Raghavan, Vijay R. (2007) Pollution reduction from spray combustion of diesel fuel using air staging technique. In: 6th Asia Pasific Conference on Combustion (ASPACC 07), 2007, Nagoya Congress Center, Nagoya, Japan.

Kamely, M. A. and Noordin, M. Y. and Venkatesh, V. C. (2007) The Effect of Multiple Pass Cutting on Surface Integrity when Hard Turning of AISI D2 Cold Work Tool Steel. International Journal of Precision Technology, 1 (1). pp. 97-105. ISSN 1755-2060

Kamsah, Mohd. Nasir and Tamin, Nazri (2007) Aspect of modelling the mechanics of solder/intermetallic interface fracture process in solder interconnects. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 55-76. ISBN 978-983-52-0547-7

Khamis Mansour, M. and Musa, M. N. and Wan Hassan, M. N. (2007) Thermal and economical optimization for a finned-tube, air-cooled condenser design of a roof-top bus air-conditioning system. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221 (11). pp. 1363-1375. ISSN 0954-4062 (Print), 2041-2983 (Online)

Khamis Mansour, M. and Musa, Md. N. and Hassan, M. N. W. and Abdullah, H. and Saqr, K. M. (2007) Development of a novel control strategy for a multiple-circuit roof-top bus air-conditioning system in hot humid countries. International Journal of Mechanical and Materials Engineering, 2 . pp. 200-211. ISSN 1823-0334

Khattak, M. A. and Maslan, M. H. and Tamin, M. N. (2007) Effect of absorbed hydrogen on crack-tip ductility in the welded A516 steel. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

L

Lai, Jau Choy (2007) Mechanical and water absorption properties of lignocellulosic phenolic composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Chiing Khai and Abu Bakar, Abd. Rahim and Abdullah, Mohd. Shahrulizam (2007) Prediction of temperature distributions in a disc assembly using the finite element method. In: 5th Malaysian Friction Materials, 2007, n/a.

Lee, Ing Yi and Mohd. Yusof, Sha'ri (2007) Product quality improvement through Poka Yoke technique. Jurnal Mekanikal (23). pp. 74-82. ISSN 0127-3396

Leong, Angeline Yee Hoong (2007) Inventory rationalisation in RMAF - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Li, Lijie and Ouyang, Huajiang and Abu Bakar, Abd. Rahim (2007) Numerical analysis of car disc brake squeal considering thermal effects. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture , 2007, UKM.

Lukman, Hafizi (2007) Estimation in spot welding parameters using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. Saqr, Khalid and Musa, Md. Nor (2007) State of the art of thermoelectric generators for waste heat recovery applications. Jurnal Teknos-2k, 7 (2). pp. 1-10. ISSN 1411 - 4151

M. Yusuf, Md. Afendi (2007) The effect of micro-bubbles elimination prior resin infusion process. Jurnal Mekanikal (24). pp. 32-39. ISSN 0127-3396

Mahgoub, Elhadi Badawi (2007) Enhancemet and analysis of a hybrid liquid desiccant based-cooling system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mailah, Musa and Kazi, Suhail and Abadi, Hossein Jahan and Md. Zain, Mohd. Zarhamdy (2007) Modeling and control of a human-like arm with muscle flexibility. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Mailah , Musa and Pitowarno, Endra and Jamaluddin , Hisahamuddin (2007) A mobile manipulator with knowledge based fuzzy active force control. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 187-202. ISBN 978-983-52-0545-3

Mailah, M. and Priyandoko, G. (2007) Simulation of a suspension system with adaptive fuzzy active force control. International Journal of Simulation Modelling , 6 (1). pp. 25-36. ISSN 1726-4529

Maimun, Adi and Roslan, Kamsani (2007) Development of Malaysia maritime database. In: World Maritime Day, 2007, Kuala Lumpur.

Mansour, M. Khamis and Musa, Md. Nor and Hassan, M. N. W. and Abdullah, H. (2007) Theoretical and experimental simulation of roof-top bus multiple-circuit air-conditioning system performance. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , 221 (12). pp. 1665-1677. ISSN 0954-4062

Maslan, Mohamad Haidir (2007) Effects of absorbed hydrogen on fracture toughness of welded SA516 grade 70 steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Ali, Mohamed Sukri (2007) Autorotation performance of unmanned aerial vehicle helicopter using rectangular and quadratic blades. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Darus, Intah Zuhrah (2007) Numerical modelling of a flexible plate system. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 47-72. ISBN 978-983-52-0545-3

Mat Darus, Intan Zaurah and Mohd. Hashim, Siti Zaiton and Mohamed, Maziah and Tokhi, Osman (2007) Interactive learning framework for dynamic modeling and control of a flexible beam structure. In: 2nd Regional Conference on Engineering Education , 2007, Johor Bahru.

Mat Darus, Intan Zaurah and Tokhi, M. O. (2007) Genetic algorithm active vibration control of a flexible plate structures. In: International Society for the Systems Sciences, 2007, United Kingdom.

Mat Saad, Khairul Anuar (2007) Manoeuvring control for pusher barge in inland waterway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, M. Z. and Noordin, M. Y. and Nabi Baksh, M. S. (2007) UTM's experience in industrial engineering education. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Mat Saman, M. Z. and Ong, M. M. (2007) An integration of measurement system analysis and process capability analysis in improving quality at glass manufacturing company. In: International Engineering Convention (IntEC 07), 2007, Serdang.

Mat Saman, M. Z. and Wei, K. L. (2007) Integration of quality tool and environmental requirements in evaluating a green design concept. In: The 5th International Conference on Quality and Reliability, 2007, Chaing Mai,Thailand.

Mazlan, A. W. and Kahar, O. and Chuah, Y. C. (2007) Numerical simulation of plate-fin recuperator. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Kuching.

Md. Daud, Nazri (2007) Performance characteristic of thermoelectric module. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Sheriff, Jamaluddin and Osman, Kahar (2007) Vortex study behind a nozzle. In: Marin Science & Technology Seminar (MARSTEC 2007), 2007, Kuala Lumpur.

Md. Sheriff, Jamaluddin and Osman, Kahar and Asral, Asral (2007) The effects of wavy surface on flow structure after a bluff body. In: The 9th Asian International Conference on Fluid Machinery, 2007, Korea.

Md. Sheriff, Jamaluddin and Osman, Kahar and Asral, Asral (2007) The study of vortex formation after a bluff body due to wind velocities with the effect of underneath wavy surface. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Crowne Plaza Riverside Hotel, Kuching, Sarawak.

Md. Sirat, Rozlina and Syed Hassan, Syed Abdul Hamid and Abdul Rani, Mat Rebi and Kuan, Yew Wong (2007) Potential critical success factors (CSFs) for total safety management (TSM) in Malaysian small and medium industries (SMIs). In: Proceedings of the International Conference on Ergonomics 2007 (ICE 2007), 2007, Kuala Lumpur.

Md. Zain, Mohd. Zarhamdy (2007) Hybrid control scheme incorporating AFC. In: -, 2007.

Md. Zin, Mohd. Zarhamdy and Hussein, Mohamed and Tokhi, M. Osman (2007) Hybrid interactive learning control scheme with acceleration feedback of flexible manipulator. In: Recent Trends In Systems And Control. Penerbit UTM, Johor, pp. 73-96. ISBN 978-983-52-0545-3

Md. Zin, Mohd. Zarhamdy and Priyandoko, G. and Mailah, M. (2007) Hybrid control scheme incorporating AFC and input shaping technique for a suspension system. In: Proceedings of 8th Seminar on Intelligent and its Applications (SITIA 2007), 9-10 May 2007, Graha Sepuluh Nopember, Surabaya Indonesia.

Md.Tap, Masine and Hassan, Adnan and Ahmad, Robiah (2007) Proposed rubrics for evaluation of class project. In: 2nd Regional Conference on Engineering Education (RCEE), 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Mehimed, Doma Seleman (2007) Study on secondary flow phenomenon in a square and cirular pipe bend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Misaran @ Misran, Mohd. Suffian (2007) Design and development of a new symmetrical wobble plate compressor for air coditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Misha, Suhaimi and Darus, Amer Nordin (2007) Variational method in the design of an optimum solar water heater storage tank. Jurnal Mekanikal (23). pp. 62-73. ISSN 0127-3396

Mishuris, Gennady and Ochsner, Andreas (2007) 2D modelling of a thin elasto-plastic interphase between two different materials: Plane strain case. Composite Structures, 80 (3). pp. 361-372. ISSN 0263-8223

Moftah Saeid, Fareg Saeid (2007) Effect of material structure machining characteristics of hypereutectic al-si alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Ariff, Azmah Hanim (2007) Interfacial reaction between Sn -37Pb and Sn - 4Ag - 0.5Cu solders on different surface finishes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Sofi @ Aziz, Azfi Zaihan (2007) Parametric system identification and active vibration control of vibrational structures using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, Normah and Eng Soon, Yeo (2007) Simulation of a microjet array cooling system. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 37-54. ISBN 978-983-52-0547-7

Mohd. Ghazali, Normah and Velautham, Sanjayan and Aziz, Azhar and Sies, Mohsin (2007) UTM-international networking in open learning unit development. In: 2nd Regional Conference on Engineering Education , 2007, Persada Johor International Convention Centre, Johor Bahru Johor.

Mohd. Ghazali, Normah (2007) Vortex motion in an acoustic chamber. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 121-134. ISBN 978-983-52-0547-7

Mohd. Jaafar, Mohammad Nazri and Aly, Hossam S. and Eldrainy, Yehia (2007) Turbulence modelling: basic, capabilities and areas of needed research. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 1-24. ISBN 978-983-52-0547-7

Mohd. Rohani, Jafri and Mohd. Yusof, Sha'ri and Mohamad, Ismail (2007) Deriving a relationship between success factors and quality performance in statistical process control implementation: a hypethetical model for empirical investigations. In: 9th Islamic Countries Conference on Statistical Sciences (ICCS-IX), 2007, Shah Alam, Selangor.

Mohd. Rohani, Jafri and Mohd. Yusof, Sha'ri and Mohamad, Ismail (2007) Variability issues in manufacturing process: a perspective from industrial practitioners. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Science 2007 (ICOMS 2007), 2007, Johor.

Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar and Hudha, Khisbullah (2007) Modeling and validation of a 7-dof full car for ride quality. In: Conference On Applications and Design In Mechanical Engineering (CADME 2007), 2007, Kangar, Perlis.

Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Hudha, Khisbullah and Abu Bakar, Saiful Anuar (2007) Modeling and validation of a fifteen degree freedom full vehicle model for longitudinal stability. In: 12th Asia Pacific Vibration Conference, 2007, Japan.

Mohd. Samin , Pakharuddin and Jamaluddin , Hishamuddin and Abd. Rahman, Roslan and Hudha, Khisbullah and Abu Bakar, Saiful Anuar (2007) Modeling and validation of a fifteen degree of freedom full vehicle model for handling quality. In: 12th Asia Pacific Vibration Conference, 2007, Japan.

Mohd. Yusof, Khairiyah and Syed Hassan, Syed Ahmad Helmi and Tasir, Zaidatun (2007) A problem-based learning (PBL) model for engineering & technical courses. In: 2nd Regional Conference on Engineering Education , 2007, Skudai.

Mohd. Yusof, Noordin and Sharif, Safian and Kurniawan, Denny (2007) Evaluation on machined surface of hardened stainless steel generated by hard turning using coated carbide tools with wiper geometry. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Mohd. Yusof, Shaari and Zakuan, N. M. (2007) A comparative study of quality management practices and implementation for automotive industry between Malaysia and Thailand: a conceptual model. In: World Engineering Congress 2007, 5-9 August 2007, Penang.

Mostofa Kamal, Md. Abu Hena (2007) Seakeeping analysis of a Malaysian fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mubarak, A. and Hamzah, E. and Toff, M. R. M. and Akhtar, P. and Orfi, S. D. and Abbas, M. (2007) Influence of deposition rate on the properties of tin coatings deposited on tool steels using arc method. In: 10th International Symposium on Advanced Materials, 2007, Pakistan.

Muhaimin, Abdul Halim and Mailah, Musa and Mohamad, Masilah (2007) Experimental implementation of active force control on a vehicle suspension model. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 31-46. ISBN 978-983-52-0545-3

Musa, Ismail and Abd. Rahman, Roslan and Yusof, Mustafa (2007) Study on static and dynamics analysis of truck chassis. In: Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM3ARC 2007), 2007, Kuala Lumpur.

Musa, Md. Nor and Idris, Mohd. Hasbullah (2007) Development of fuel cell powered automotive thermal comfort and refrigeration system. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

N

Nagarajan, R. and Yaacob, Sazali and Pandian, P. and Karthigayan, M. and Amin, Shamsudin and Khalid, Marzuki (2007) A real time marking inspection scheme for semiconductor industries. The international journal of advanced manufacturing technology, 34 (9-10). pp. 926-932. ISSN 0268-3768 (Print) 1433-3015 (Online)

Namazi, H. and Sharif, S. and Akhavan, A. and Razfar, Farid M. R. (2007) Optimization of workpiece elastic deflection in machining operations using ant colony system. In: Tehran International Congress on Manufacturing Engineering (TICME 2007), 2007, Tehran.

Namazi, Hamidreza and Sharif, Safian and Farid, Ali Akhavan (2007) Heat treatment optimization of 15-5PH stainless steel using genetic algorithm. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Nawawi, Sophan Wahyudi and Ahmad, Mohamad Noh and Shah Osman, Johari Halim (2007) Development of a two wheels inverted pendulum mobile robot. In: 2nd Regional Conference on Engineering Education , 2007, Johor.

Ng, Wan Tak and Mohd. Yusof, Sha'ri (2007) Statistical quality improvement in thermoforming process. In: World Engineering Congress 2007, 2007, Penang.

Ngali, M. Z. and Sidik, N. A. C. and Osman, K. and Khudzairi, A. Z. M. (2007) Solution to navier-stokes equations for lid-driven cavity problem: comparisons between lattice boltzmann and splitting method. In: Proceeding of Computational & Experimental Mechanics (CEM 2007), 2007.

Niw, Chang Chee and Abu Bakar, Abd. Rahim (2007) Finite element modeling of arc welded joints. Jurnal Mekanikal (23). pp. 15-30. ISSN 0127-3396

Noordin, M. Y. and Venkatesh, V. C. and Sharif, Safian (2007) Dry turning of tempered martensitic stainless tool steel using coated cermet and coated carbide tools. Journal of Materials Processing Technology, 185 (1-3). pp. 83-90. ISSN 0924-0136

Noordin, M.Y. and Kurniawan, D. and Sharif, S. (2007) Hard Turning of Stainless Steel using Wiper Coated Carbide Tool. International Journal of Precision Technology, 1 (1). pp. 75-84. ISSN 1755-2060

Noordin, M. Y. and Tang, Y. C. and Kurniawan, D. (2007) The use of TiAIN coated carbide tool when finish machining hardened stainless steel. International Journal Precision Technology, 1 (1). pp. 21-29. ISSN 1755-2060

Nordin, N. N. and Zainuddin, Z. M. and Kuan, Yew Wong (2007) Metaheuristics for solving facility layout problems: concepts and trends. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Science 2007 (ICOMS 2007), 2007, Johor Bahru.

Nusyirwan, Istas F. and Bil, Cees (2007) Optimizing evader's trajectory in 6-DOF pursuit-evasion problem using parallel evolutionary programming. In: Simulation Conference and Exhibition (SimTecT 2007), 2007, Brisbane Convention Centre.

Nusyirwan, Istas F. and Bil, Cees (2007) Pursuer-evasion strategy optimisation in air combat scenarios. In: Australian JSF Advanced Technology and Innovation Conference 2007, 2007, Melbourne, Australia.

Nusyirwan, Istas Fahrurrazi and Bil, Cees (2007) Unmanned air vehicles II. In: Information, Decision and Control Conference, 2007, Adelaide, Australia.

Nusyirwan, Istas Fahrurrazi and Bil, Cees (2007) Pursuit-evasion strategy optimisation in air combat scenarios. In: Australian JSF Advanced Technology and Innovation Conference 2007, 10­ - 11 July 2007, Melbourne, Australia.

Nusyirwan, Istas Fahrurrazi and Bil, Cees (2007) Methods of aircraft trajectory optimisation in air combat. Australian and New Zealand Industrial and Applied Mathematics Journal, 47 . C649-C664. ISSN 1446-8735

O

Ochsner, Andreas and Vesenjak, Matej and Ren, Zoran (2007) Thermal post-impact behavior of closed-cell cellular structures with fillers - Part I. Materials Science Forum, 553 . pp. 196-201. ISSN 0255-5476

Ochsner, Andreas and Gracio, Jose (2007) An evaluation of the elastic properties of an adhesive layer using the tensile-butt joint test: Procedures and error estimates. International Journal of Adhesion and Adhesives, 27 (2). pp. 129-135. ISSN 0143-7496

Ochsner, Andreas and Stasiek, Michal and Mishuris, Gennady and Gracio, Jose (2007) A new evaluation procedure for the butt-joint test of adhesive technology: determination of the complete set of linear elastic constants. International Journal of Adhesion and Adhesives, 27 (8). pp. 703-711. ISSN 0143-7496

Oliveira, Branca F. de and Cunda, Luiz A. B. da and Creus, G. J. and Oschner, Andreas (2007) Finite element simulation of compression tests on cellular metals. APMTAC, Portugal . ISSN 1230-3534

Omar, Rohaizat (2007) Optimization of machine tool structure design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osman, Kahar and Lee, Tuck Kuen and Md. Sheriff, Jamaluddin (2007) Application of similarity solution to film cooling for flat plate. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Osman, Kahar and Md. Sheriff, Jamaluddin and Mohamed, Salahuddin (2007) Numerical analysis on performance of spiral coil heat exchanger. In: The 3rd International Conference on Thermal Engineering, 21st-23rd, May 2007, Amman, Jordan.

P

Pang, Hooi San (2007) Development of low coefficient of thermal expansion composite substrate for electronic packaging using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Permatasari, Rosyida and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Samsudin, Mohammad Sayuthy (2007) Flow characterization of gas-solid mixture in fluidized bed combustion. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Kuching.

Pesetskaya, Ekaterina and Fiedler, Thomas and Öchsner, Andreas (2007) Two different approaches for the effective conductivity investigation of 2D porous materials with temperature dependent material properties. Materials Science Forum, 553 . pp. 118-123. ISSN 1662-9752

Pesetskaya, Ekaterina and Öchsner, Andreas and Rogosin, Sergei (2007) The effective conductivity of 2D porous materials with temperature dependent material properties. Materials Science Forum, 553 (1). pp. 112-117.

Pitowarno, E. and Mailah, Musa (2007) Control of mobile manipulator using resolved acceleration with iterative-learning-proportional-integral active force control. International Review of Mechanical Engineering, 1 (5). pp. 549-558.

Priyandoko, Gigih and Mailah, Musa and Jamaluddin, Hishamuddin (2007) Skyhook adaptive neuro active force control for a suspension system. In: The 1st International Conference on Control, Instrumentation and Mechatronics (CIM'07), 2007, Johor Bahru.

Purniawan, A. and Hamzah, E. and Toff, M. R. M. (2007) Characterization of polycrystalline diamond coated on tungsten carbide deposited by microwave plasma assisted chemical vapor deposition. In: International Conference on Surfaces, Coatings and Nanostructured Materials, 2007, Portugal.

Purniawan, A. and Hamzah, E. and Toff, M. R. M. (2007) The formation of nanocrystalline diamond coating on WC deposited by microwave assisted plasma CVD. In: International Conference on Advancement of Materials and Nanotechnology, 2007, Langkawi, Kedah.

Purniawan, A. and Hamzah, E. and Toff, M. R. M. (2007) The quality analysis of polycrystalline diamond coated si3n4 using raman spectra: the effect of chamber pressure and microwave power. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Science 2007 (ICOMS 2007), 2007, Ibnu Sina Institute for Fundamental Science Studies.

Purniawan, A. and Hamzah, E. and Toff, M. R. M. (2007) Residual stress analysis using raman spectra on polycrystalline diamond coated on WC deposited by microwave plasma assisted chemical vapor deposition. In: 1st International Conference on Sustainable Materials 2007, 2007, Parkroyal, Penang.

R

Rahim, E. A. and Shariff, Safian (2007) Tool failure modes and wear mechanism of coated carbide tools when drilling Ti-6AI-4V. International Journal Precision Technology, 1 (1). pp. 30-39. ISSN 1755-2079 (Online) : 1755-2060 (Print)

Raja Hamzah, R. I. and Mba, D. (2007) Acoustic Emission and Specific Film Thickness for Operating Spur Gears. Journal of Tribology , 129 (4). pp. 860-867. ISSN 0742-4787

Rajoo, Srithar and Martinez-Botas, R. F. (2007) Improving energy extraction from pulsating exhaust flow by active operation of a turbocharger turbine. In: SAE 2007, 2007, Michigan, USA.

Ramli, N. and Mansor, S. and Jamaluddin, H. and Faris, W. F. (2007) Identification of aerodynamic coefficients of ground vehicles using neural network. IEEE Intelligent Vehicles Symposium, Proceedings . pp. 50-55.

S

S., Syahrullail and S., Kamitani (2007) Experimental evaluation of RBD palm olein as lubricant in cold metal forming by Plane strain extrusion. In: Malaysia-Japan International Symposium on Advanced Technology 2007, 2007, Kuala Lumpur.

S., Syahrullail and S., Kamitani and K., Nakanishi (2007) The performance of RBD palm stearin as cold metal working lubricant by plane strain extrusion test. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Crowne Plaza Riverside Hotel, Kuching, Sarawak,.

Shamsudin, Syariful Syafiq (2007) The development of autopilot system for an unmanned aerial vehicle (UAV) helicopter model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsudin, Zuraidy (2007) Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shanmugam, Bharanidharan and Idris, Norbik Bashah (2007) Improved hybrid intelligent intrusion detection system using AI technique. Neural Network World, 17 (4). pp. 351-362. ISSN 1210-0552

Sharif, Safian and Abd. Rahim, Erween (2007) Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4V. Journal of Materials Processing Technology, 185 (1-3). pp. 72-76. ISSN 09240136

Sharif, S. and Rival, Rival and M. Y., Noordin (2007) Effect of using SiC on surface integrity of titanium alloy, TI-6246 in PMD-EDM. In: World Engineering Congress 2007, 2007, Penang.

Sharif, S. and Sarizal, M. A. and Sarizal, S. A. (2007) Effect of cold isostatic press parameters and sintering temperatures on the physical behaviors of alumina powder (Al2O3). In: Malaysian Symposium On Advances In Powder Metallurgy & Particulate Materials, 2007, Selangor.

Sharif, Safian and Abd. Rahim, Erween and Mohruni, Amrifan Saladin and Jawaid, Ashraf (2007) Effect of edge geometry on PVD-TiN coated carbide tools when face milling titanium alloy, Ti-6246. In: Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), 2007, Japan.

Sharif, Safian and Mohd. Yusof, Noordin (2007) Surface defects in PMD-EDM of titanium alloy Ti-6246. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Sia, Toh Ching and Velautham, Sanjayan and Nordin, Amer (2007) Exergetic optimization of a flat plate solar collector design. International Energy Journal, 8 (2). pp. 125-130. ISSN 1513-718X

Sidik, Nor A. C. (2007) Incompressible finite difference double-population thermal lattice boltzmann model. In: Proceedings of the 1st Engineering Conference Energy and Environment (EnCon 2007), 2007, Kuching.

Soo, Say Leong and Ratnam, Mani Maran and Samad, Zahurin and Khalid, Mohd. Ashhar (2007) Automatic label removal from digitized weld radiographs. Jurnal Teknologi D . pp. 1-14. ISSN 0127-9696

Su, Massharudin (2007) Study on thermal characteristic of oscilloscope with new from factor design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suardi, Khairmen and Hamzah, E. and Ourdjini, A. and Venkatesh, V. C. (2007) Effect of heat treatment on the diffusion coefficient of hydrogen absorption in gamma-titanium aluminide. Journal of Materials Processing Technology, 185 (1-3). pp. 106-112. ISSN 0924-0136

Sudin, Izman and Mohd. Nasir, Tamin and Mon, T. T. and Venkatesh, V. C. and Mohamed Shaharoun, Awaluddin (2007) Stagnant zone formation on diamond cutting tools during machining. In: National Metallurgical Conference 2007 (NMC 2007), 2007, Johor Bahru.

Sudin, Izman and Ourdjini, Ali and Moftah, Fareg Saeid (2007) PCD turning of hypereutectic Al-18wt% Si alloy. In: National Metallurgical Conference, The Putri Pacific Hotel. Johor Bahru, Johor.

Syahrom, Ardiyansyah (2007) Design and development of multistage symmetrical wobble compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syahrullail, S. and Kamitani, S. (2007) Experimental evaluation of RBD palm stearin as cold metal by plane strain extrusion test. In: Proceeding of EnCon2007, 2007, Kuching, Sarawak.

Syed Hassan, Syed Ahmad Helmi (2007) Comparison of two algorithms for production layout improvement-the application. In: Regional Annual Fundamental Science Seminar 2007 (RAFSS 2007) and 2nd International Conference on Mathematical Science 2007 (ICOMS 2007), 2007, Johor.

T

T. C., Mah and M. G., Normah (2007) Numerical modeling of inviscid acoustic waves in a closed chamber. In: 2nd International Conference on Mathematical Sciences 2007 (ICoMS 2007), 2007, Johor Bahru.

Taib, Iskriza and Osman, Kahar and Abdul Kadir, Mohamed Rafiq and Mahat, Mohd Mazwan (2007) Numerical modelling of abdominal aortic aneurysm. In: Advances in Applied Numerical Methods. Penerbit UTM , Johor, pp. 77-102. ISBN 978-983-52-0547-7

Tamin, M. N. and Liew, Y. B. and Wagiman, A. N. R. and Loh, W. K. (2007) Solder joint fatigue in a surface mount assembly subjected to mechanical loading. IEEE Transactions on Components and Packaging Technologies, 30 . pp. 824-829. ISSN 1521-3331

Tamin, Mohd N. and M. Nor, Fethma and Wei, Keat Loh (2007) Hybrid experimental-computational approach for solder/IMC interface shear strength determination in tin-lead solder joints. In: International Conference on Advanced Computation Engineering Experimenting, 2007, Portugal.

Tamin, Mohd. Nasir and Osman, Hassan (2007) Stress analysis and fatigue life prediction of a wobble plate. In: Proceeding of Computational & Experimental Mechanics (CEM 2007), 27-28 Nov, 2007, Bangi, Selangor.

Tan, Chek Zin (2007) An experimental and field study of cavitation detection in pump. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Chi Sian (2007) Investigation of vibration characteristics of fibre-reinforced plastic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tawi, Kamarul Baharin and Ariyono, Sugeng and Jamaluddin, Hishamuddin and Hussein, Mohamed and Supriyo, Bambang (2007) Adaptive neural network optimisation control of ICE for vehicle with continuously variable transmission. In: International Conference on Intelligent and Advanced Systems 2007. Institute of Electrical and Electronics Engineering (IEEE), pp. 257-262. ISBN 978-1-4244-1355-3

Tawi, Kamarul Bahrin and Ariyono, Sugeng and Jamaluddin, Hishamuddin and Hussein, Mohamed and Supriyo, Bambang (2007) Adaptive neural network optimisation control of ICE for vehicle with continuously variable transmission. In: International Conference on Intellegence and Advance System, ICEAS’07, 25-28 November 2007, Kuala Lumpur.

Teo, Han Fui and Abd. Rahman, Roslan (2007) Statics and dynamics structural analysis of a 4.5 ton truck chassis. Jurnal Mekanikal (24). pp. 56-67. ISSN 0127-3396

Thangavelu, T. R. Anbarasan (2007) Evaluation of coolant concentration on the machiniability of carbon steel during end milling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Thet, Thet Mon (2007) Modelling of stagnant zone formation on diamond cutting tool when turning titanium alloy. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Toh, Eric Fong Chai (2007) Critical review of hydraulic transient analysis for onshore gas plant fire protection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

U

Udoncy, Olugu Ezutah (2007) Simulation study of lens manufacturing process flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

V

Venkatesh, V. C. and Izman, S. (2007) Development of a novel binderless diamond grinding wheel for machining IC chips for failure analysis. Journal of Materials Processing Technology, 185 (1-3). pp. 31-37. ISSN 0924-0136

Vesenjak, Matej and Öchsner, Andreas and Ren, Zoran (2007) Evaluation of thermal and mechanical filler gas influence on honeycomb structure behavior. Materials Science Forum, 553 . pp. 190-195.

W

Wan Harun, Wan Sharuzi (2007) Evaluation of ABS patterns produced from FDM for investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Nik, B. W. and Maleque, M. A. and Ani, Farid Nasir and Masjuki, Hassan (2007) Experimental Investigation on system performance using palm oil as hydraulic fluid. Industrial Lubrication and Tribology, 59 (5). pp. 200-208. ISSN 0036-8792

Wiwiek Fatmawati, Wiwiek Fatmawati (2007) Analysis of product disassemblability using the disassembly evaluation chart methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Wai Peng and Wong, Kuan Yew (2007) Supply chain performance measurement system using DEA modeling. Industrial Management & Data Systems, 107 (3). pp. 361-381. ISSN 0263-5577

Wong, Kuan Yew and Tham, Chien Yeh (2007) A simulation study on the manufacturing of electronic chassis. Rio's International Journal on Sciences of Industrial and Systems Engineering and Management, 1 (1). pp. 29-54. ISSN 1982-6443

Wong, Wai Hing and Mohd. Ghazali, Normah (2007) Numerical Simulation Of A Microchannel For Microelectronic Cooling. Jurnal Teknologi , 46 (A). pp. 1-16. ISSN 2128-4428

Wong, Wai Peng and Jaruphongsa, Wikrom and Lee, Loo Hay and Wong, Kuan Yew (2007) A preliminary study on using Data Envelopment Analysis (DEA) in measuring supply chain efficiency. International Journal of Applied Systemic Studies, 1 (2). pp. 188-207. ISSN 751-0589

Y

Yeong Shiong, Chiew and Abdul Jalil, Mohamad Kasim and Hussein, Mohamed (2007) Graphical simulation for motion platform design. In: Recent Trends In Systems And Control. Penerbit UTM, Johor, pp. 121-134. ISBN 978-983-52-0545-3

Z

Zubir @ Zubair, Baizura (2007) Assemblability design efficiency (ADE) analyses for design for automatic assemblies (DFAA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.