Universiti Teknologi Malaysia Institutional Repository

Adaptive neural network optimisation control of ICE for vehicle with continuously variable transmission

Tawi, Kamarul Baharin and Ariyono, Sugeng and Jamaluddin, Hishamuddin and Hussein, Mohamed and Supriyo, Bambang (2007) Adaptive neural network optimisation control of ICE for vehicle with continuously variable transmission. In: International Conference on Intelligent and Advanced Systems 2007. Institute of Electrical and Electronics Engineering (IEEE), pp. 257-262. ISBN 978-1-4244-1355-3

[img] PDF
Restricted to Repository staff only

487Kb

Official URL: http://dx.doi.org/10.1109/ICIAS.2007.4658386

Abstract

Continuously variable transmissions (CVT) have received great interest as viable alternative to discrete ratio transmission in passenger vehicle. It is generally accepted that CVTs have the potential to provide such desirable attributes as: a wider range ratio, good fuel economy, shifting ratio continuously and smoothly and good driveability. With the introduction of continuously variable transmission (CVT), maintaining constant engine speed based on either its optimum control line or maximum engine power characteristic could be made possible. This paper describes the simulation work in drivetrain area carried out by the Drivetrain Research Group (DRG) at the Automotive Development Centre (ADC), Universiti Teknologi Malaysia, Skudai Johor. The drivetrain model is highly non-linear; and it could not be controlled satisfactorily by common linear control strategy such as PID controller. To overcome the problem, the use of adaptive neural network optimisation control (ANNOC) is employed to indirectly control the engine speed by adjusting pulley CVT ratio. In this work, the simulation results of ANNOC into drivetrain model showed that this highly non-linear behaviour could be controlled satisfactorily

Item Type:Book Section
Uncontrolled Keywords:adaptive neural network, CVT control, electromechanical CVT, engine speed control
Subjects:T Technology > TJ Mechanical engineering and machinery
Divisions:Mechanical Engineering
ID Code:9606
Deposited By: Salasiah M Said
Deposited On:06 Jan 2010 07:57
Last Modified:02 Jun 2010 02:01

Repository Staff Only: item control page