Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

Article

A., Norhayati and Wira, J. Y. and Mohd. Zin, H. and Syahrullail, Syahrul (2012) A new method to maintain lubricant layer in extrusion process. AIP Conference Proceedings, 1440 . pp. 894-899. ISSN 0094-243X

Abd. Fatah, Abdul Yasser and Mazlan, Saiful Amri and Koga, Tsuyoshi and Zamzuri, Hairi and Zeinali, Mohammad Javad and Imaduddin, Fitrian (2015) A review of design and modeling of magnetorheological valve. International Journal of Modern Physics B, 29 (4). ISSN 0217-9792

Abdalhadi, Abdualrhman and Wahid, Herman and Burhanuddin, Dirman Hanafi (2022) An optimal proportional integral derivative tuning for a magnetic levitation system using metamodeling approach. Indonesian Journal of Electrical Engineering and Computer Science, 25 (3). pp. 1356-1366. ISSN 2502-4752

Abdul Aziz, Azhar and Sumeru, Kasni and Muhammad Said, Mohd. Farid and Mohd. Perang, Mohd. Rozi and Nasution, Henry (2016) Single-cylinder 125 cc stepped-piston engine for mobility and portable power generation applications. International Journal of Technology, 7 (2). pp. 352-361. ISSN 2086-9614

Abdul Majid, Zulkifli and Mohsin, Rahmat and Omar, Fadhli (2008) Erosive wear of natural gas pipeline. Jurnal Teknologi F (49F). pp. 341-356. ISSN 0127-9696

Abu Bakar, A R. and Hamid, M K A and Zakaria, K (2005) Simulasi tekanan sentuhan dinamik bagi brek cakera menggunakan kaedah unsur terhingga.". Proceedings of Computational & Experimental Mechanics . pp. 287-296.

Abu Bakar, A R. and Li, L and James, S and Ouyang, H and Siegel, J E (2006) Wear simulation and its effect on contact pressure distribution and squeal of a disc brake. Proceedings of the International Conference on Vehicle Braking Technology . pp. 233-242. ISSN 0 85316 245X

Abu Bakar, A. R. and Ouyang, H. and Titeica, D. and Hamid, M. K. A. (2005) Modelling and Simulation of Disc Brake Contact Analysis and Squeal. Seminar on Advances in Malaysian Noise Vibration and Comfort (NVC 2005) .

Abu Bakar, Abd. Rahim and Abdul Hamid, Mohd Kameil and Ouyang, Huajiang (2006) A new prediction methodology for dynamic contact pressure distributions in a disc brake. Jurnal Teknologi A (45A). pp. 1-11. ISSN 0127-9696

Abu Bakar, Saiful Anuar and Jamaluddin, H. and Rahman, R. A. and Samin, P. M. and Hudha, K. (2008) Vehicle ride performance with semi-active suspension system using modified skyhook algorithm and current generator model. International Journal of Vehicle Autonomous Systems, 6 (3/4). pp. 197-221. ISSN 1471-0226

Abu Kassim, Khairil Anwar and Johari, Mohd. Hafiz and Wahi, Najihah and Ahmad, Yahaya and Mohd. Jawi, Zulhaidi and Yahya, Wira Jazair (2021) The intention to purchase safer car in Singapore: an application of theory of planned behaviour. Journal of Advanced Vehicle System, 11 (1). pp. 32-37. ISSN 2550-2212

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Shaharoun, A. M. (2008) The evaluation methods of disassemblability for automotive components - a review and agenda for future research. Jurnal Mekanikal (26). pp. 49-62. ISSN 0127-3396

Ahmad, Roazam and Mohd. Ja'afar, Mohammad Nazri (2000) Membangunkan pemusar udara untuk kegunaan ke atas pembakar berbahan api cecair. Jurnal Mekanikal, 1 (9). pp. 23-42. ISSN 0127-3396

Ahmad Noorden, A. F. and Daud, S. and Haider Rizvi, S. Z. and Ali, J. and Yupapin, P. P. (2016) Monitoring of traffic using unmanned aerial vehicle in Malaysia landscape perspective. Jurnal Teknologi, 78 (3). pp. 225-230. ISSN 0127-9696

Al-Abbas, M. H. (2012) Recycling used palm oil and used engine oil to produce white bio oil, bio petroleum diesel and heavy fuel. AIP Conference Proceedings, 1482 . pp. 205-209. ISSN 0094-243X

Ammar, N. M. M. (2012) Particle movement in shear cavity flow for different stokes number using Lattice Boltzmann Method. AIP Conference Proceedings, 1440 (1). ISSN 0094-243X

Anua, N. Najwa and Ahmed, Rashid and Saeed, Mohammad Alam and Shaari, Amiruddin and Ul Haq, Bakhtiar (2012) DFT investigations of structural and electronic properties of gallium arsenide (GAAS). AIP Conference Proceedings, 1482 . pp. 64-68. ISSN 0094-243X

Aparow, Vimal Rau and Hudha, Khisbullah and Megat Ahmad, Megat Mohamad Hamdan and Jamaluddin, Hishamuddin (2016) Development and verification of a 9-DOF armored vehicle model in the lateral and longitudinal directions. Jurnal Teknologi, 78 (6). pp. 117-137. ISSN 0127-9696

Dahalan, Md. Nizam and Lee, Boon Peng (2001) Software development for aerodynamic characteristics estimation of wing-body combination of aircraft at cubsonic speeds. Jurnal Mekanikal (12). pp. 23-33. ISSN 0127-3396

Damirchi, H. and Najafi, G. and Alizadehnia, S. and Mamat, R. and Nor Azwadi, C. S. and Azmi, W. H. and Noor, M. M. (2016) Micro Combined Heat and Power to provide heat and electrical power using biomass and Gamma-type Stirling engine. Applied Thermal Engineering, 103 . pp. 1460-1469. ISSN 1359-4311

Daud, Z. H. C. and Chrenko, D. and Dos Santos, F. and Aglzim, E. and Keromnes, A. and Le Moyne, L. (2016) 3D electro-thermal modelling and experimental validation of lithium polymer-based batteries for automotive applications. International Journal of Energy Research, 40 (8). pp. 1144-1154.

El-Fawal, M. H. and Mohd. Ghazali, Normah (2012) Optimized heat exchanger unit in a thermoacoustic refrigerator. AIP Conference Proceedings, 1440 . pp. 1300-1308. ISSN 0094-243X

Fakhar, K. and Joseph, B. Z. H. (2012) Symmetry reductions and some exact solutions for rotating flows of an oldroyd-b fluid with hall currents. AIP Conference Proceedings, 1493 . pp. 345-349. ISSN 0094-243X

Feiz Abadi, Hediyeh Karimi and Webb, J. F. and Ahmadi, Mohammad Taghi and M. Rahmani, Amir and Saeidmanesh, Mehdi and Khalid, M. and Ismail, Razidah (2012) Dna sensor model based on a carbon nanotube network in the degenerate limit. AIP Conference Proceedings, 1499 . pp. 283-286. ISSN 0094-243X

Ganjehkaviri, Abdolsaeid and Mohd. Jaafar, Mohammad Nazri and Hosseini, Seyed Ehsan and Musthafa, Anas Basri (2016) Performance evaluation of palm oil-based biodiesel combustion in an oil burner. Energies, 9 (2). pp. 1-10. ISSN 1996-1073

H., Azmi and C. S., Nor Azwadi (2012) Numerical analysis of natural convection in porous media using constrained interpolated profile method. AIP Conference Proceedings, 1440 (1). pp. 716-731. ISSN 0094-243X

Habidin, N. F. and Yusof, S. M. (2012) Relationship between lean six sigma, environmental management systems, and organizational performance in the malaysian automotive industry. International Journal of Automotive Technology, 13 (7). pp. 1119-1125. ISSN 1229-9138

Haider, Bilal and Mansor, Shuhaimi and Mat, Shabudin and Nasir, Nazri (2022) Review of uncertainty of the flow over low sweep lambda wing unmanned combat air vehicles (UCAV). Journal of Aeronautics Astronautics and Aviation, 54 (1). pp. 25-48. ISSN 1990-7710

Haq, B. U. and Ahmed, R. (2012) Structural and electronic properties of ni-doped zno in zinc-blende phase: a DFT investigations. AIP Conference Proceedings, 1482 . pp. 54-57. ISSN 0094-243X

Huang, Wei and Mohd. Samin, Pakharuddin and Tawi, Kamarul Baharin (2016) Feasibility investigation on novel concept of clutched train system to substitute for vehicular friction clutch. Journal of Advanced Mechanical Design, Systems and Manufacturing, 10 (1). ISSN 1881-3054

Ibrahim, Ahmad Azlan Shah and Mohd. Jaafar, Mohammad Nazri (2008) Power estimation for four seater helicopter. Jurnal Mekanikal (27). pp. 78-90. ISSN 0127-3396

Imran, Mohd. Salleh and Sarip, Shamsul and Muhtazaruddin, Mohd. Nabil and Hassan, Mohamad Zaki and Md. Daud, Mohd. Yusof and Abdul Aziz, Sa'ardin (2016) Structural health monitoring (SHM) on high stress loading of wing bracket. Journal of Advanced Research in Applied Mechanics, 27 (1). pp. 16-22. ISSN 2289-7895

Jailani, Mohd. Anuar and Mohd. Jaafar, Mohammad Nazri (1999) Emisi ekzos dari kenderaan bermotor, kesannya ke atas atmosfera dan kaedah pengurangannya : satu kajian. Jurnal Mekanikal (8). ISSN 0127-3396

Jamei, S. and Maimun, Adi and Mansor, Shuhaimi and Che Sidik, Nor Azwadi and Priyanto, Agoes (2012) Numerical investigation on aerodynamic characteristics of a compound wing-in-ground effect. Journal of Aircraft, 49 (5). pp. 1297-1305. ISSN 0021-8669

Johari, Nasrul Hadi and Mhd. Nor, Wan Mohd Basri and Osman, Kahar and Mohd. Salleh, Zuliazura and Helmi, Mohd. Haris and Abdul Kadir, Mohammed Rafiq (2012) Effect of tracheal stenosis at different locations on airflow in the trachea and main bronchi. AIP Conference Proceedings, 1440 . pp. 1325-1332. ISSN 0094-243X

Kobayashi, Akira (2013) Measurements of ablation phenomena on coaxial pulsed plasma thruster with separated propellant. Frontier of Applied Plasma Technology, 6 (2). pp. 51-56. ISSN 1883-5589

Laili, Muhamad Fareez and Abu Kassim, Khairil Anwar and Johari, Mohd. Hafiz and Ahmad, Yahaya and Yahya, Wira Jazair (2021) Development of Tata super ace finite element model. Journal of Advanced Vehicle System, 11 (1). pp. 13-31. ISSN 2550-2212

Nikmat Leong, Siti Asma and Mohd. Samin, Pakharuddin and Idris, Ani and Mazlan, Saiful Amri and A. Rahman, Azura Hanis (2016) Synthesis, characterization and magnetorheological properties of carbonyl iron suspension with superparamagnetic nanoparticles as an additive. Smart Materials and Structures, 25 (2). ISSN 0964-1726

M. Saqr, Khalid and S. Aly, Hossam and A. Wahid, Mazlan and M. Sies, Mohsin (2009) Numerical simulation of confined vortex flow using a modified k-£ turbulence model. CFD Letters, 1 (2). pp. 87-94. ISSN 2180-1363

Mansor, Shuhaimi and Ishak, Iskandar Shah and Ong, Meng Wei and Fahrurazi, Istas (2000) Development of a dynamic wind tunnel rig for aircraft pure pitching motion. Jurnal Mekanikal, 2 (10). pp. 46-57. ISSN 0127-3396

Marghany, Maged and Hashim, Mazlan (2010) Utilization of MODIS satellite data for modelling chlorophyll concentrations along Malaysian coastal waters. American Journal of Scientific Research (8). pp. 5-11. ISSN 1450-223X

Mat Sahat, Idris and Che Sidik, Nor Azwadi and Nik Mutasim, Muhammad Ammar (2012) Cubic interpolation profile Navier-Stokes numerical scheme for particle flow behaviour in triangular lid driven cavity. AIP Conference Proceedings, 1440 . pp. 209-215. ISSN 0094-243X

Md. Sam, Yahaya and Hudha, Khisbullah and Osman, Johari Halim Shah (2007) Proportional-integral sliding mode control of a hydraulically actuated active suspension system: force tracking and disturbance rejection control on non-linear quarter car model. International journal of vehicle systems modelling and testing (IJVSMT), 2 (4). pp. 391-410.

Mohd. Azmi, Mohd. Irwan and Che Sidik, Nor Azwadi and Abd. Munir, Fudhail and Misha, Suhaimi and Md. Daud, Nazri and Razali, Nadlene and Mat Sahat, Idris (2012) Free convection in square cavity driven by discrete three source-sink pairs on one sidewall. AIP Conference Proceedings, 1440 . pp. 242-246. ISSN 0094-243X

Mohd. Jaafar, Mohammad Nazri (1996) The application of fuel staging on reducing NOx emissions from gas burner. Jurnal Mekanikal (2). pp. 1-15. ISSN 0127-3396

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamed Shukri (2003) Mengkaji keberkesanan aplikasi pemusar udara ram bilah rata dalam mengurangkan emisi dari pembakar berbahan api cecair. Jurnal Teknologi F (39F). pp. 11-22. ISSN 0127-9696

Mohd. Jaafar, Mohammad Nazri and Abdul Mookmin, Muhamad Shukri and Samat, Ismail (2009) Emission reduction from burner system by varying swirler blade angle. Jurnal Teknologi F (51F). pp. 121-130. ISSN 0127-9696

Mohsin, Rahmat and Ramly @ Hassan, Noor Shafine and Abd. Majid, Zulkifli (2008) Performance curve in domestic gas meter calibration system. Jurnal Teknologi (49F). pp. 323-339. ISSN 0127-9696

Mohsin, Rahmat and Yaacob, Zulkefli and Chang, Yvonne (2008) Computational fluid dynamics analysis of an injection mixer for CNG engines simulation. Jurnal Teknologi (49F). pp. 297-310. ISSN 0127-9696

Mokhtar, Nur Hazwani and Yaakob, M. S. and Osman, K. and Abdul Kadir, Mohammed Rafiq and W. Abdullah, W. K. and Haron, J. (2012) Flow modeling of actual human nasal cavity for various breathing conditions. AIP Conference Proceedings, 1440 . pp. 692-699. ISSN 0094-243X

Mokhtar, Safizahanin and Muhammad Hussein, Muhammad Zaly Shah and Abd. Gahni @ Abd. Ghani, Zulazhar (2022) A review on sustainable transport policy in Malaysia. Journal Of Tourism, Hospitality And Environment Management, 7 (27). pp. 259-271. ISSN 0128-178X

Namma, Haydar Aboud and Wagiran, Husin and Hussin, Rosli and Ariwahjoedi, Bambang and Hossain, Imam and Abbas, Saad Saber and Aziz, Madzlan (2012) Effect of co-doped sno2 nanoparticles on photoluminescence of cu-doped potassium lithium borate glass. AIP Conference Proceedings, 1482 . pp. 664-666. ISSN 0094-243X

Norhaniza, R. and Mazlan, S. A. and Aziz, S. A. A. and Ubaidillah, Ubaidillah and Nordin, N. A. and Muhazeli, N. S. (2020) Relationship between the response of microscopic and magnetic properties with highly uniform dispersion of carbonyl iron particles in magnetorheological polyurethane foam. Smart Materials and Structures, 29 (11). ISSN 0964-1726

Omar, Zamri and Mailah, Musa (2003) A preliminary study into the application of active force control strategy to an automotive suspension system. Jurnal Mekanikal (15). pp. 42-57. ISSN 0127-3396

Othman, Zainon and Kamaruddin, A. and Othman, Nor' Azizi (2014) Preliminary study on current process of bus component inspection among public bus transport in Malaysia. Journal of Transport System Engineering, 1 (1). pp. 74-80. ISSN 2289-9790

Rahman, Md. Mujibur and Yahya, Wira Jazair and Abd. Kadir, Hasannuddin and Ithnin, Ahmad Muhsin and Mohd. Tamam, Qayyum and Abdul Rahman, Hasbullah (2022) Comparison of diesel engine performance between a mechanical pump and a common rail fuel injection system equipped with real-time non-surfactant emulsion fuel supply system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 91 (2). pp. 41-50. ISSN 2289-7879

Rasmana, Susijanto Tri and Adiputra, Dimas and Yahya, Wira Jazair and Abdul Rahman, Mohd. Azizi and Dwijotomo, Abdurahman and Mohammed Ariff, Mohd. Hatta and Abu Husain, Nurulakmar (2021) A systematic review on the autonomous emergency steering assessments and tests methodology in ASEAN. Journal of the Society of Automotive Engineers Malaysia (JSAEM), 5 (2). pp. 185-193. ISSN 2600-8092

Ridzuan, M.J.M. and Hafis, S. M. and Saifullah, K. N. and Syahrullail, S. (2012) A study of minimum quantity lubricant of refined bleached deodorized palm stearin in plane strain extrusion. AIP Conference Proceedings, 1440 . pp. 900-904. ISSN 0094-243X

Saeidmanesh, Mehdi and Webb, Jeffrey and Ahmadi, Mohammad Taghi and Feiz Abadi, H.K and Rahmani, Meisam and Ismail, Risana and Karimi, Hediyeh (2012) Carrier concentration modeling of bilayer graphene. AIP Conference Proceedings, 1499 . pp. 280-282. ISSN 0094-243X

Saqr, Khalid M. and Musa, Md. Nor (2008) On the deployment of thermoelectric waste heat recovery in the Malaysian road transport sector. Proceedings of the 1st International Meeting on Advances in Thermofluids . pp. 234-241.

Saqr, Khalid M. and Mansour, M. Khamis and Musa, Md. Nor (2008) Thermal design of automobile exhaust based thermoelectric generators : objectives and challenges. International journal of automotive technology, 9 (2). pp. 155-160. ISSN 1229-9138

Sarip, Shamsul (2013) Design development of lightweight disc brake for regenerative braking - finite element analysis. International Journal of Applied Physics and Mathematics, 3 (1). pp. 52-58. ISSN 2010-362

Shamsudin, Zainul Rashid and Mohd. Jaafar, Mohammad Nazri (1999) Pembangunan perisian (VORLATTE) menggunakan kaedah kekisi vorteks bagi menentukan ciri aerodinamik sayap sembarangan. Jurnal Mekanikal, 1 (7). pp. 36-55. ISSN 0127-3396

Shi, She and Ong, Choon Hee (2023) Determinants and consequence on perception of new energy vehicles: a conceptual study. International Journal of Academic Research in Business and Social Sciences, 13 (7). pp. 874-885. ISSN 2222-6990

Sulaiman, Mohd. Hafis and Mohd. Jamir, Mohd. Ridzuan and Wan Nordin, Imaduddin Helmi and Samion, Syahrullail (2012) Effect of extrusion ratio on paraffinic mineral oil lubricant in cold forward extrusion. AIP Conference Proceedings, 1440 . pp. 556-561. ISSN 0094-243X

van der Heiden, P. and Pohl, C. and Mansor, S. and van Genderen, J. (2016) Necessitated absorptive capacity and metaroutines in international technology transfer: a new model. Journal of Engineering and Technology Management - JET-M, 41 . pp. 65-78. ISSN 0923-4748

Wan Hassan, Wan Anuar and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Wan Abdullah, Wan Ahmad Kamil and Haron, Juhara and Ngali, Mohd. Zamani (2012) Effect of anastomosis angle on hemodynamic of side-to-end radiocephalic arteriovenous fistula (RCAVF). AIP Conference Proceedings, 1440 . pp. 665-670. ISSN 0094-243X

Wiriadidjaja, Surjatin and Hasim, Fadilah and Mansor, Shuhaimi and Asrar, Waqar and Mohd. Rafie, Azmin Shakrine and Abdullah, Ermira Junita (2012) Subsonic wind tunnels in Malaysia: a review. Applied Mechanics and Materials, 225 . pp. 566-571. ISSN 1660-9336

Ya'aini, Nazlina and Amin, Nor Aishah Saidina (2012) Catalytic performance of hybrid nanocatalyst for levulinic acid production from glucose. AIP Conference Proceedings, 1502 (1). pp. 442-453. ISSN 0094-243X

Yaacob, Zulkefli and Mohsin, Rahmat and Abd Majid, Zulkifli and Teh, Irene Hui Lynn and Baharim, Rosdi (2008) Finite element stress analysis on natural gas motorcycle intake manifold. Jurnal Teknologi, F (49). pp. 311-322. ISSN 0127-9696

Yakub, F. and Lee, S. and Mori, Y. (2016) Comparative study of MPC and LQC with disturbance rejection control for heavy vehicle rollover prevention in an inclement environment. Journal of Mechanical Science and Technology, 30 (8). pp. 3835-3845. ISSN 1738-494X

Yusof, I. M. and Farid, N. A. and Zainal, Z. A. and Horizon, G. B. and Azman, M. (2009) Preliminary investigation of a converted four-stroke diesel to alpha v-shaped stirling engine. Asian Journal of Applied Sciences, 2 (2). pp. 101-114. ISSN 1996-3443

Yusof, I. M. and Farid, N. A. and Zainal, Z. A. and Horizon, G. B. and Noriman, K. and Miskam, A. (2009) Design, fabrication and testing of a swirl burner for alpha v-shaped stirling engine. Asian Journal of Applied Sciences, 2 (6). pp. 475-485. ISSN 1996-3343

Book Section

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Ali, Mohd. Fawzi and Mohammad Said, Mohd. Farid and Said, Mazlan (2008) Performance and emission evaluations of a prototype stepped-piston engine using carburetor and direct fuel-injection systems. In: Research On Vehicle Technologies. Penerbit UTM , Johor, pp. 89-104. ISBN 978-983-52-0550-7

Abdul Rahim, Herlina and Ibrahim, Syahira (2011) Monitoring heart beat in intelligent safety car system. In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 95-108. ISBN 978-967-354-185-0

Abdul Rahim, Ruzairi and Mohd. Khairuddin, Ismail and Zainal Abodin, Amar Faiz and Amanpour, Saied and Ganji, Elham and Mansor, Muhammad Saiful Badri (2011) Inspect operational aircraft for stress cracks. In: Progress in Process Tomography & Instrumentation System: Series 7. Penerbit UTM Press, Skudai, Johor, pp. 1-14. ISBN 978-967-354-185-0

Fahami, S. M. H. and Zamzuri, Hairi and Mazlan, Saiful Amri and Zakaria, M. A. (2012) Modeling and simulation of vehicle steer by wire system. In: SHUSER 2012 - 2012 IEEE Symposium on Humanities, Science and Engineering Research. IEEE, New York, USA, pp. 765-770. ISBN 978-146731310-0

Mailah, Musa and Gigih Priyandoko, Gigih Priyandoko and Jamaluddin, Hishamuddin (2008) Identification of vehicle suspension system using particle swarm optimization with neural network. In: Research on Vehicle Technologies. Penerbit UTM , Johor, p. 121. ISBN 978-983-52-0550-7

Md. Sam, Yahaya and Ishak, Nor Khomar and Othman, Radiah S. E. R. A. and Ahmad, A. and Basari, Amat Amir (2009) An observer design of nonlinear quarter car model for active suspension system by using backstepping controller. In: Proceedings of 2009 5th International Colloquium on Signal Processing and Its Applications, CSPA 2009. Article number 5069208 . Institute of Electrical and Electronics Engineers, New York, pp. 160-165. ISBN 978-142444150-1

Mohamad, Mazita and Abdul Rahim, Ruzairi and Rahiman, Mohd. Hafiz Fazalul and Mansur, Saiful Badri and Nor Ayob, Noor Muzakkir and Zakaria, Zulkarnay (2011) Intelligent car detecting system (ICDS). In: Progress in Process Tomography & Instrumentation System: Series 6. Penerbit UTM Press, Skudai, Johor, pp. 171-188. ISBN 978-967-354-184-3

Mohd. Yusof, Sha'ri and Nilda, Tri Putri (2009) Critical success factors for implementing quality engineering tools and techniques in Malaysian's and Indonesian's automotive industries : an exploratory study. In: IMECS 2009 : International Multi-Conference of Engineers and Computer Scientists. Lecture Notes in Engineering and Computer Science, 1-2 . Int Assoc Engineers-Iaeng, Hong Kong, pp. 1736-1741. ISBN 978-988-17012-2-0

Munoz-Rojas, Pablo A. and Carniel, Thiago A. and Silva, Emilio C. N. and Ochsner, Andreas (2011) Optmization of a unit periodic cell in lattice block materials aimed at thermo-mechanical applications. In: Heat Transfer in Multi-Phase Materials. Springer, New York, pp. 301-345. ISBN 978-3-642-04402-1

Shamsul, Sarip (2008) Model pepejal 3D. In: Lukisan Kejuruteraan dan Berbantu Konputer. Pearson, pp. 1-52.

Monograph

Abd. Rahman, Roslan and Kamsah, Nazri and Abd. Latif, Zulkarnain (2005) Utilisation of noise suppression techniques in the development of two-stroke, stratified-charge, lean-burn gasoline engines. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Aziz, Azhar and Suhadi, Mohd. Sairaji and Mohd. Noor, Alias and Abdullah, Abu Hassan and Tawi, Kamarul Baharin and Abu Bakar, Rosli (2005) The design and development of a new twostroke (125 Cc) stratified-charge, lean-burn air-cooled engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Dahalan, Md. Nizam and Mohd Jaafar, Mohd Nazri and Wan Ali, Wan Khairuddin and Mamat, Rizalman and Abd. Ghani, Mohd Shaiful Azman (2003) Determining Potassium Nitrate performance as solid rocket propellant for rocket engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Daud, Mohd. Fadzil and Hanafiah, Khairul Anwar and Wan Hussin, Wan Nazdah (2003) Mechanical design and fabrication of a prototype motorized tricycle for the disable. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Marghany, Maged Mahmoud (2008) Development of doppler shift algorithm for modelling sea surface current movements from radar remote sensing data. Project Report. Faculty of Geoinformation Science and Engineering, Skudai, Johor. (Unpublished)

Marghany, Maged Mahmoud (2008) Satellite synthetic aperture radar (SAR) coastal water backcatter study. Project Report. Faculty of Geoinformation Science and Engineering, Skudai, Johor. (Unpublished)

Mat, Hanapi and Zakaria, Zainal and Mohd. Norddin, Mohd. Noorul Anam and Tan, Siu Ming and Terry, George Paou (2000) The development of adsorbent based natural gas storage for vehicle application. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Noor, Alias and Abu Bakar, Rosli and Abdul Aziz, Azhar and Abdul Latif, Zulkarnain and Mohd. Rohani, Jafri and Saat, Aminuddin (2005) Design and development of auxiliary components for a new two-stroke, stratified-charge, lean-burn gasoline engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Nusyirwan, Istas Fahrurrazi and Dahalan, Md. Nizam (2003) Using composite materials To fabrication UAV wing. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Rajoo, Srithar and Mohd. Noor, Alias and Abdul Aziz, Azhar (2003) Performance analysis of turbocharger effect on engine in local cars. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yaacob, Zulkefli and Abdul Majid, Zulkifli (1998) Natural gas motorcycle. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yaakob, Omar and Abdul Malik, Adi Maimun and Samian, Yahya and Fitriadhy, Ahmad (2006) Development Of A Semi-Swath Craft For Malaysian Waters. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yusof, Mustafa and Abdul Rahman, Roslan (2004) Development of an automotive seat for ride comfort. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Conference or Workshop Item

Ab. Wahab, Abas and Mamat, Rosbi and Shamsudin, Syariful Syafiq (2006) Control system design for an autonomous helicopter model in hovering using pole placement method. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Abd. Baki, Tisiyanah and Noordin, Badriyah and Mohamed, Norliza and Idrus, Sevia Mahdaliza and Abd. Rasid, Siti Zaleha (2022) Digitalization of airside operations process to improve airport operations for the case of Malaysia airports. In: 4th International Conference on Smart Sensors and Application, ICSSA 2022, 26 July 2022 - 28 July 2022, Kuala Lumpur, Malaysia.

Abd. Kader, Ab. Saman (2015) River restroration for inland waterways transportation system. In: The 1st International Conference on Maritime Development, 4-6 Sept, 2015, Indonesia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan (2015) Optimization of fuel consumption rate for tugboat in relation to port operations. In: The 1st International Conference on Maritime Development, 4-6 Sept, 2015, Indonesia.

Abdul Aziz, Azhar and Ali, Mas Fawzi (2006) Conceptual development of a pressure-swirl injector for a two-stroke GDI engine. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Abdul Aziz, A. and Abdul Latiff, Z. and Mohd. Ali, M. Fawzi and Mohammad Said, M. Farid and Said, M. (2006) Enhancing the performance of a 125 cc single-cylinder, aircooled, gasoline two-stroke engine. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Abdul Aziz, Azhar and Sumeru, Kasni and Muhamad Said, Mohd. Farid and Mohd. Perang, Mohd. Rozi and Nasution, Henry (2015) Single-cylinder 125 cc stepped piston engine for mobility and portable power generation applications. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Abu Bakar, Nooh and Abdul Rahim, Zulhasni (2015) Innovative case of patent circumvention application in automotive industry. In: International Conference on Innovation and Management (1CIM 2015), 17-20 Nov, 2015, China.

Adnan, Azlan (2012) Nonlinear time history and pushover analyses for seismic performance evaluation of tall airport traffic control towers. In: ASEA-SEC-1, 28 Nov-2 Dec, 2012, Perth, Australia.

Ahmad Zainuri, Mohamad Ihsan and Abdul Latiff, Zulkarnain and Muhamad Said, Mohd. Farid and Abdul Aziz, Azhar and Mohd. Perang, Mohd. Rozi (2015) The effect of bio-based additives on engine performance and emissions of petrol and diesel engine. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Ammoo, Mohd. Shariff and Dahalan, Md. Nizam (2006) Micro Air Vehicle: Technology Review and Design Study. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ariffin, Aini Suzana (2015) The relationship between national automotive policy and innovation : an investigation to Malaysian automotive parts companies in the automotive global value chain business. In: International Conference on Business Economic, Social Science & Humanities (BESSH-2015), 9-10 Nov, 2015, Kuala Lumpur, Malaysia.

Ariyono, Sugeng and Tawi, Kamarul Baharin and Jamaluddin, Hishamuddin and Supriyo, Bambang (2006) Engine speed control using artificial neutral network for vehicle equipped with electromechanical CVT. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Attaran, A. and Majid, D. L. and Basri, S. and Mohd. Rafie, A. S. (2006) Structural Optimization of an Aeroelastically Tailored Composite Flat Plate Made of Woven Fiberglass/Epoxy. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Cheng, S. -Y. and Mansor, S. (2016) Influence of rear-roof spoiler on the aerodynamic performance of hatchback vehicle. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Darsivan, Fadly Jashi and Martono, Wahyudi (2006) Engine Mounting Characteristic for Vibration Isolation and Active Vibration Control Strategies. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ghazirah, Ghazirah and Basuno, B. and Razali, Radzuan (2006) On The Use of Non uniform inflow Model for Aerodynamics Analysis Helicopter Rotor Blade in the Forward Flight. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ghazirah, Ghazirah and Basuno, B. and Razali, Radzuan (2006) The Application of Combined Momentum – Blade Element Theory for Aerodynamics Analysis Helicopter Rotor Blade in the Forward Flight. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Gunsalam, Henry and Mohd. Yusof, Illyia (2006) Solid Propellant Motor Design: Comparison of Theoretical and Experimental Data. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Hamzah, N. and Nordin, N. M. and Isahak, W. N. R. W. and Kassim, M. B. and Yarmo, M. A. (2013) Study on effect recyclability of ru/bentonite-tio2 catalysts in glycerol hydrogenolysis reaction using x-ray photoelectron spectroscopy (XPS). In: Advanced Materials Research.

Hanafi, Dirman and Zakaria, Mohamad Fauzi and Omar, Rosli and M. Than, M. Nor and Rahmat, M. Fua'ad and Ghazai, Rozaimi (2015) Neuro model approach for a quarter car passive suspension systems. In: Applied Mechanics and Materials, 3 Apr, 2015, Switzerland.

Huang, W. and Samin, P. M. and Tawi, K. B. (2016) Model reference control of conceptual clutched train substituted for vehicular friction clutch. In: 3rd International Conference on Mechanical Engineering Research, ICMER 2015, 18 August 2015 through 19 August 2015, Pahang; Malaysia.

Ibrahim, Abdul Rahman and Shamsuddin, Siti Mariyam and Mansor, Shuhaimi (2007) Surface reconstruction of solar car aerodynamics with PSO-NURBS hybrid parameterization. In: Postgraduate Annual Research Seminar (PARS’ 07), 2007, UTM, Johor Bahru.

Isa, Mohamad Dali and Abu Bakar, Abu Zaid (2006) Technical, Safety and Economical Aspects of Considering Repair to Aircraft Structures. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ishak, Iskandar Shah (2006) Computational fluid dynamics simulation and wind tunnel testing on microlight model. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri (2006) Noxious emission reduction from liquid fuel burner via air staging method. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ishak, Iskandar Shah and Mat, Shabudin and Mat Lazim, Tholudin and Muhammad, Mohd. Khir and Mansor, Shuhaimi and Awang, Mohd. Zailani (2006) Experimental and simulation Studies of a Two Seater Light Aircraft. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Iyas, M. M. and Sallehuddin, M. and Sukri, M. A. M. and Shuhaimi, M. M. (2013) Wind tunnel testing of composite wing flutter speed due to control surface excitation. In: Applied Mechanics And Materials.

Izuddin Md. Ithnan, M. and Nusyirwan, I. F. and Mohd. Rohani, J. (2016) Aircraft ground movement delay: a descriptive statistical analysis at Kuala Lumpur International Airport. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 Mac 2016, Kuala Lumpur, Malaysia.

Jamali, A. and Mat Darus, I. Z. and Abdulhussain, A. and Tokhi, M. O. (2016) Non-parametric modeling of double-link flexible robot manipulator based on NNARX model structure. In: 19th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, CLAWAR 2016;, 12-14 Sept 2016, London, United Kingdom.

Kasava, Nithia Kuar and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2015) Low carbon emissions review in aviation engine technology for Asean airspace: a proposal. In: International Conference of Low Carbon Asia (ICLCA 2015), 11-12 Okt, 2015, Johor Bahru, Johor.

Kobayashi, Akira and Shun, Takenaka and Naoto, Kobayashi and Hideyuki, Horisawa (2015) Characteristics of a micro-multi-plasmajet-array thruster. In: Advances in Applied Plasma Science /ISAPS 2015, 31 Aug-4 Sept, 2015, Japan.

Koto, J. and Siow, C. L. and Guedes Soares, C. and Yasukawa, H. and Matsuda, A. and Terada, D. and Abyn, H. (2016) Motion response of round shape FLNG due to interaction with another floating structure. In: 3rd International Conference on Maritime Technology and Engineering, MARTECH 2016, 4-6 July 2016, Lisbon, Portugal.

Mahamad, Firdaus and Koto, Jaswar and Ishak, Iskandar Shah and Ammoo, Mohd. Shariff (2015) Performance characteristics of generic bell 206b helicopter tail rotor blade using empirical numerical method. In: The 2nd International Conference on Ocean, Mechanical and Aerospace., 21-22 Oct, 2015, Indonesia.

Mahmod, Muhamad Ibrahim and Munisamy, Kannan M. (2006) Experimental Analysis of Ventilated Brake Disc with Different Blade Configuration. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Mansor, S. and Nogoud, Y. A. M. and Alamin, R. (2016) Longitudinal command stability augmentation system design for unstable aircraft using flying and handling qualities specifications. In: 1st International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering, ICCNEEE 2015, 7-9 Sept 2015, Khartoum, Sudan.

Mat Saman, Muhamad Zameri and Zakuan, Norhayati (2006) End-of-Life Vehicle Directive: A Key Element to the Vehicle Design Process. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Mohamed Suffian, Mohd. Harridon (2006) Structural Analysis via Cellular Automata: Parameters of Wings of Boeing 737. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Mohamed Yatim, Abdul Halim and Mohd., Mohd. Syaifuddin and Abu Bakar, Mohd Noor (2003) Fuel cell scooter simulation using ADVISOR : approach & preliminary results. In: Seminar Penghasilan Sel Bahan Api Malaysia, 2003, Negeri Sembilan.

Mohd. Rafie, A. S. and Attaran, A. and Majid, D. L. and Basri, S. (2006) Design and Development of an Experimental Aeroelastic Test Rig. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Mohd. Yusof, I. and Chuang, K. L. and Basuno, B. and Mohd. Dahlan, S. F. (2006) Development of a Versatile UAV Platform for Agricultural Applications. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Muhamad, Sallehuddin (2006) Simulation of the Tanjung Kupang Air Crash. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Muhamad, Sallehuddin and Hamid, Khairul Azura (2003) A four-seat light airplane design. In: 10th Australian International Aerospace Congress incorporating the 14th National Space Engineering Symposium 2003, 29 July – 1 August 2003, Brisbane, Queensland, Australia.

Muhamad Said, Mohd. Farid and N. W. M., N. W. M. and Zulikfli, Zulikfli and Edilan, M. M. and Kalam, M. A. and Ghazali, N. N. N. (2015) Effect of valve timing events on the performance of compressed natural gas direct injection (CNGDI) engine using simulation. In: International Conference on Mechanical Engineering and Advanced Material 2015, 3-4 Dec, 2015, Sabah, Malaysia.

Nahvi, Hassan and Mohd. Nor, Mohd. Jailani and Fouladi, Mohammad Hosseini and Abdullah, Shahrum (2006) Evaluating Automobile Road Vibrations Using BS 6841 and ISO 2631 Comfort Criteria. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Nawawi, S. W. and Ahmad, M. N. and Osman, J. H. S. and Husain, A. R. (2006) Controller design for two-wheels inverted pendulum vehicle using PISMC. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Ng, H. K. and Shayler, P. J. (2006) CFD Investigation of the Effects of Split Main Fuel Injection Parameters on Combustion and Emissions in a Light-Duty Diesel Engine. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Nik Mohd., Nik Ahmad Ridhwan and Wahab, A. A. (2006) Feasibility Study on Improving of Helicopter Forward Flight Speed via Modification of the Blade Dimension and Engine Performance. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Nik Mohdi, Nik Ahmad Ridhwan and Ab. Wahabii, Abas (2006) Numerical Analysis of an Isolated Main Helicopter Rotor in Hovering and Forward Flight. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Nusyirwan, I. F. and Kung, Z. Y. (2016) Aircraft nonlinear optimal control using fuzzy gain scheduling. In: 6th Innovation in Aerospace Engineering and Technology, AEROTECH 2016, 8 November 2016 through 9 November 2016, Kuala Lumpur; Malaysia.

Nusyirwan, Istas F. and Bil, Cees (2006) Optimal Real Time Evasion against High Speed Pursuer Using Evolutionary Programming. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Omar, Ashraf A. and Ismail, Ahmad Firdaus and Zakaria, Muhammad and Yusof, Youshafidi (2006) Design, Fabrication of IIUM Unmanned Air Vehicle. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Rosmin, Norzanah and Abdul Rahman, Norhazwani and Musta'amal @ Jamal, Aede Hativ (2015) A performance comparison of three micro-sized blade rotor designs for Malaysia wind speed condition. In: Applied Mechanics and Materials, 18-19 Mar, 2015, Melaka, Malaysia.

Sahari, Barkawi and Ahmad, Mohd. Fauzy and Chelliah, V. (2006) Development of Waja Based CNGDI Passenger Vehicle Rear Platform Component. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Sahari, Barkawi and Ali, Yusoff and Ahmadun, Fakhru’l-Razi and Abdullah, Shahrir and Hassan, Masjuki and Aris, Ishak and Abdullah, Muhamad Adlan and Ahmad, Mohd. Fauzy and Chelliah, V. and Taha, Zahari and Aziz, Abd. Rashid and Musa, Md. Nor and Chuah, T. G. and Mariun, Norman and Ku Hamid, Ku Halim and Radhakrishnan, V. R. (2006) Compressed Natural Gas Passenger Vehicle Development – Issues and Challenges. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Serevina, Vina and Sumeru, Sumeru and Abdul Aziz, Azhar and Nasution, Henry (2015) Performance comparison of automotive air conditioner using various refrigerants. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Shafie, N. A. M. and Said, M. F. M. and Aziz, A. A. and Latiff, Z. A. and Yamin, A. K. M. and Tamaldin, N. (2016) Steady flow and dynamic analyses comparison of an air intake breathing capacity. In: 2nd International Conference on Automotive Innovation and Green Vehicle, AiGEV 2016, 2 August 2016 through 3 August 2016, Selangor; Malaysia.

Shamsudeen, A. and Abdullah, S. and Ariffin, A. K. (2006) Finite Element Simulation of a Steady-State Stress Distribution in a Four Stroke Compressed Natural Gas-Direct Injection Engine Cylinder Head. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Sirat, Waris and Harun, Zulkefli (2006) Aircraft Maintenance Management - Role of Licence Aircraft Maintenance Engineer by Complying to Aviation Regulations to ensure a High Standard of Maintenance. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Supriyo, Bambang and Tawi, Kamarul Baharin and Jamaluddin, Hishamuddin and Ariyono, Sugeng (2006) DC motor position control for pulley axial movement of an electromechanical dual acting pulley (EMDAP) CVT system. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Wahab, A. A. and M. Ali, M. S. (2006) Numerical Study on the Transition Performance of a Scale Model Helicopter from Hovering to Vertical Autorotation. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Wahab, A. A. and M. Ali, M. S. (2006) Preliminary Experimental Investigation on Autorotation Performance of Scale Model Helicopter in Vertical Manoeuvre. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Wahab, A. A. and Ismail, M. Hafiz (2006) Estimating vertical drag on helicopter fuselage during hovering. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Wahab, A. A. and Mamat, Rosbi and Shamsudin, Syariful Syafiq (2006) The Development of Autopilot System for an Autonomous UAV Helicopter Model. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Wahid, M. A. and Panomruttanarug, B. and Drouin, A. and Mora-Camino, F. (2016) Space-indexed aircraft trajectory tracking. In: 28th Chinese Control and Decision Conference, CCDC 2016, 28 May 2016 through 30 May 2016, China.

Wong, Prisillia Yuean Ning and Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Mohd. Perang, Mohd. Rozi (2015) The effect of decontaminants on vehicle cooling system. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Yeung, W. W. H. (2006) Lift Enhancement on Unconventional Airfoils. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Zaman @ Bujang, Izzuddin and Abd. Rahman, Roslan (2006) Application Of Dynamic Correlation Technique And Model Updating On Truck Chassis. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Zamzuri, H. and Zolotas, A. C. and Goodall, R. M. (2007) LQG and fuzzy correction mechanism in tilting railway vehicle control design. In: 3rd IFAC workshop on Advanced Fuzzy and Neural Network (AFNC07), 29-30 Oct. 2007, Valenciennes, France.

Thesis

Abdullah, Nor Arymaswati (2009) An application of observer for position sensorless stepper motor drives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdulwafi, Fouad D. S. (2013) Geographical analysis of Libyan airports and their potential as a hub of air transportation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Aghaabbasi, Mahdi (2013) Critical analysis on the role of buses during disaster : a case study of Katrina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Adizul (2005) An observer design for active suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Ahmad Hisham (2008) Pilots perception toward KLIA air traffic control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad, Nasarudin (1999) Optimal control of active suspension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Mukred, Jameel Abdulla (1999) Petri net-based modelling and simulation of a designed automated work cell for electric motor assembly. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alvi, Omair Ali (2013) Mathematical modeling using Matlab to evaluate fuel ferrying strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amil, Mohd Azril (2009) Supplier performance assessment tool in automotive industry using multivariate analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Hasan, Mohd. Hanif (2013) An active front steering control based on composite nonlinear feedback for vehicle yaw stability system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chee, Kai Chuen (1997) Concurrent programming using ada task construct for air traffic control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Dahalan, Md. Nizam (1994) Anggaran aerodinamik terhadap badan dan sayap peluru berpandu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Darus, Rosheila (2008) Modeling and control of active suspension for a full car model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Huong, Yu Saint (2001) Wing-external store aerodynamic interferences of a subsonic aircraft. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Syahrim Azhan (2014) Magnetic attitude control for nano-satellites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Indraguna, Vannebula Eka (2006) Electronic fuel injection controller for natural gas vehicle motorcycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Irawan, Bambang (2000) On heuristic methods for the single depot multi vehicle routing problem with and without time windows. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamei, Saeed (2012) Aerodynamic characteristics of compound wing configuration of wing-in-ground effect vehicle. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamil, Mudhafar Salah (2014) Robust yaw stability control of hybrid electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khademi, Shahab (2014) Mechatronic and instrumentation of automotive air conditioning test rig. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khodori, Ahmad Faidzal (2014) The study of limitations of several vehicles handling models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Liew, Taik Hwa (2002) New apparatus for skid testing : assessment for dusty surfaces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M. Yusuf, Md. Afendi (1999) Paraffin wax application in automotive medelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahmood, Nasrul Humaimi (2001) Cableless battery charger using electromagnetic induction tecnique for electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mamat, Rizalman (2002) Ciri-ciri propelan roket pepejal berasaskan kalium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masoomzadeh, Ahmad (2020) Organizational innovation factors, capabilities and organizational performance in Iranian automotive industry. PhD thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology & Informatics.

Md. Sam, Yahaya (2004) Modeling and control of active suspension system using proportional integral sliding mode control. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Kamar, Haslinda (1997) Kajian ke atas ciri-ciri angin lintang di lebuhraya Malaysia : lokasi KM212 Ayer Keroh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Rehan, Muhammad Saifuddin (2006) Dynamic analysis of tramcar suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Pauzi, Nurul Norhamizah (2012) Response of air traffic control tower with pendulum tuned mass damper under earthquake loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Salleh, Mohd. Naqiuddin (2015) Study on the performance of envo diesel in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yaseen, Yasir Amzad Ali (2009) Developing PLC based gantry robot using positioning servo drive with profibus – dp communication protocol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mokhtar, Mohd. Khalid (2013) Adaptive coherent hierarchical culling algorithm for UTM car driving simulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Muhamad, Sallehuddin (1994) Subsonic transport aircraft flying profile in abnormal flight conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Naderian, Kasra (2013) Kinematic and dynamic analysis of passive suspension using pneumatic and flexible tire. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Ismail, Nik Nur Amiza (2014) On the solution of a blasius equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nutranta, Ruli (1998) Deformation behaviour of car roof in somersault condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Amin Shah (2002) Environmentally conscious design for car air-conditioning compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Zamri (2002) Modelling and simulation of an active suspension system using active force control strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Priyandoko, Gigih (2009) Intelligent active force control of a vehicle suspension system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Radin Salim, Kamilah (1992) Flight stability and control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rajan, Sargeswara (2014) Pid controller for semi-active suspension system using magneto-rheological (MR) damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rizvi, Syed Mustijab Haider (2013) Finite element analysis of aircraft coreless spoiler structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saat, Norazila (1998) Mangkin berasaskan oksida mangan bagi rawatan emisi gas toksik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sangkeetha, Subramaniam (2012) Vehicle type classification based on frontal profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saude, Md. Yusof (2009) The effect of applying defensive driving techniques in reducing truck accidents in Mox-Linde Gases Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sheikh Salim, Sheikh Ahmad Zaki (2002) Determination of drag coefficient of a passenger car by computer simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sunarsih, Sunarsih (2013) Profiling and ranking of marine propulsion plant based on fuzzy multi criteria decision making method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Chee Wei (2009) Modeling and control of an engine fuel injection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Umar, Ismail Abubakar (2015) Controllers design of an active suspension system based on half car model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Uthman Hassan, Aveen (2014) Controller gain tuning for road vehicle following in a convoy system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yahya, Nurul Nadiah (2012) Mapping of sea bottom features using high resolution satellite data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yengejeh, Sadegh Imani (2013) Dynamic analysis of aircraft landing gear. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yeoh, Wei Cherng (2015) Robust electronic brake force distribution in hybrid electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yiow, Chong Lyat (2000) Vibro-acoustic analysis of car body structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zulfatman, Zulfatman (2008) Identification of test rig for a quarter car active suspension systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.