Items where Division is "Mechanical Engineering" and Year is 2009

A

A. Asmael, Mohammed Bsher (2009) Lost foam casting of LM6-Al-Si cast alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ab Wahid, Mastura and Wan Ali, Wan Khairuddin (2009) Design and fabrication of a 200N thrust rocket motor based on NH4ClO4 + Al + HTPB as solid propellant. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009, 2009, Taman Safari, Bogor, Indonesia.

Ab. Adzis, Azri Hamim (2009) Development of a method to investigate the wash of recreational craft in inland waterways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Samad, Faisal Ikram (2009) Performance of catenary mooring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Samad @ Mahmood, Md. Fahmi (2009) Evolutionary computation for model structure selection in system identification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Wahid, Mazlan (2009) Biofuel pulse combustion characteristics. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Aziz, Anis Fauzi (2009) Parametric modeling of twin rotor multi input multi output system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Hamid, Mohd. Kamiel and Stachowiak, G. W. (2009) Effect of hard particle grift size on friction coefficents and embedment of automotive braking system. Jurnal Mekanikal (29). pp. 1-18. ISSN 0127-3396

Abdul Hamid, Shamsul Effendy (2009) Fuzzy expert system package for the assessment of marine technology training programs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Haq, Reazul Haq (2009) Performance evaluation of different types of graphite electrodes on titanium (Ti-6AI-4V). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri (2009) The effect of bone properties due to skeletal diseases on stability of cementless hip stems. American Journal of Applied Sciences, 6 (12). pp. 1988-1994. ISSN 1546-9239

Abdul Latif, Nur Hidayah and Nasir Ani, Farid and Hamdan, Halimaton (2009) The performance of a bench scale liquefaction of carbon dioxide. Jurnal Mekanikal (29). pp. 84-99. ISSN 0127-3396

Abdul Malik, Asmawi (2009) Legal framework governing the carriage of liquified natural gas (LNG) within coastal water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Munir, Fudhail (2009) Development of an efficient Lattice Boltzmann numerical scheme for simulation of shear driven cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Roslan and Yusof, Mustafa and Tamin, Mohd. Nasir (2009) Development of a truck chassis. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Rani, Mat Rebi and Ismail, A. R. and Makhbul, Z. K. M. and Md. Deros, Baba (2009) Assessment of thermal comfort and optimization of environmental factors at automotive industry. European Journal of Scientific Research , 31 (3). pp. 409-423. ISSN 1450-202X

Abdul-Kadir, Mohammed Rafiq and Kamsah, Nazri (2009) Interface micromotion of cementless hip stems in simulated hip arthroplasty. American Journal of Applied Sciences . pp. 1682-1689. ISSN 1546-9239

Abdullah, Abdul Halim (2009) Effects of prosthesis stem lengths and tapers on stress distribution in cemented hip arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdulrazak, Lway Faisal and Abdul Rahim, S. K. and Abd. Rahman, Tharek (2009) New algorithm to improve the coexistence between IMT-advanced mobile users and fixed satellite service. In: Proceedings of 2009 International Conference On Machine Learning and Computing (IACSIT ICMLC 2009). World Acad Union-World Acad Press, England, pp. 294-301. ISBN 978-1-84626-018-6

Abu Bakar, Abd. Rahim and Abdul Rahman, Roslan and Md. Zain, Mohd. Zarhamdy and Abd. Ghani, Badri (2009) Evaluation of an automotive wiper noise & vibration characteristics using numerical approach. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abu Bakar, Saiful Anuar (2009) Modelling and control of magnetorheological damper in semi-active suspension system of passenger vehicle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Hassan, Shukur and Ismail, Yob Saed and Mohd. Sam, Abd. Rahman (2009) Load sustained rig for bond durability study. Jurnal Mekanikal (28). pp. 16-27. ISSN 0127-3396

Abu Hassan, Nurfazlin (2009) Study of interfacial reaction during reflow soldering of Sn-Ag-Cu lead-free solders on bare coppper and immersion silver surface finishes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Othman, Nor Liawati (2009) Inventory management and control at an in-flight catering company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu-Bakar, Abd. Rahim and Buang, Mohd. Reaza and Abdul Rashid, Mohd. Zam and Abdul Rahman, Roslan (2009) Suppression of drum brake squeal through structural modifications using finite element method. International Journal of Vehicle Design , 51 (1-2). 3 -20. ISSN 0143-3369

Abubakar, M. and Muthuraja, A. and Rajak, D. K. and Ahmad, N. and Pruncu, C. I. and Lamberti, L. and Kumar, A. (2009) Influence of firing temperature on the physical, thermal and microstructural properties of kankara kaolin clay: a preliminary investigation. Materials, 13 (8). ISSN 1996-1944

Afrinaldi, Feri (2009) Software for integration of end-of-life option determination, disassemblability evaluation and disassembly sequencing optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Fauzi and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2009) Gain scheduling PID control with pitch moment rejection for reducing vehicle dive and squat. International Journal of Vehicle Safety, 4 (1). pp. 45-83. ISSN 1479-3105

Ahmad, Kamal (2009) Finite element analysis of welding deformation in aluminium T-Joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, S. and Muchtar, A. and Muhamad, N. and Sahari, J. and Jamaludin, K. R. and Ibrahim, M. H. I. (2009) Optimising of processing parameters of Titanium alloy foams using Taguchi method for improved electrical conductivity. In: Proceedings of the Graduate Publication Workshop 2009, 30-31 Mac 2009, The Residence Hotel, UNITEN.

Ahmad, S. and Muhamad, N. and Muchtar, A. and Sahari, J. and Jamaludin, Khairur Rijal and Ibrahim, Mohd. Halim Irwan and Mohamad Nor, N. H. (2009) Taguchi method for the determination of optimised sintering parameters of titanium alloy foams. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Ahmad, Shaharudin and Maimun, Adi and H. P., Yupiter and Rahmad, Junaidah and Effendy, Rizal and A Bakar, Hamzah and Omar, Rohani (2009) Finite element analysis of a semi-small water-plane area twin hull (SWATH) structure. In: Conference on Scientific and Social Research CSSR2009A', 2009, Famosa Resort, Melaka.

Ahmad, Z. and Thambiratnam, D. P. (2009) Application of foam-filled conical tubes in enhancing the crashworthiness performance of vehicle protective structures. International Journal of Crashworthiness, 14 (4). pp. 349-363. ISSN 1358-8265

Ahmad Zaini, Muhammad Abbas and Okayama, Reiko and Machida, Motoi (2009) Adsorption of aqueous metal ions on cattle-manure-compost based activated carbons. Journal of Hazardous Materials, 170 (2-3). pp. 1119-1124. ISSN 03043894

Ahmed Eldrainy, Yehia Abdel Morem and S. Aly, Hassam and M. Saqr, Khalid and Mohd. Jaafar, Mohammad Nazri (2009) A multiple inlet swirler for gas turbine combustor. In: International Conference on Fluid Mechanics, Heat Transfer and Thermodynamics (FMHT 2009), 2009, Tokyo, Jepun.

Al-Mola, Mohammed Hussin Ahmed (2009) Robust intelligent active force controller for a wagner brake model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alhauwari, Kamal Farag Khalifa (2009) Evaluation of shear angle values in fully orthogonal cutting using QSD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Mohamed Assnousi (2009) Corrosion behaviour of ductile cast iron. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Mubarak L. and Hamzah, Esah and Ali, Nouman (2009) Adhesion strength of tin coatings at various ion etching deposited on tool steels using cathodic ARC PVD technique. Surface Review and Letters , 16 (1). pp. 29-35. ISSN 0218625X

Amil, Mohd Azril (2009) Supplier performance assessment tool in automotive industry using multivariate analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ani, Farid Nasir and Jais, Mohd. Fadzli (2009) Biodiesel from non-edible Malaysian fruits. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Annamalai Gurunathan, Balamurugan (2009) Energy absorption of impact damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anwar, Mahmood (2009) Theoretical and operating resonance frequency for an applied thermoacoustic refrigerator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anwar, Mahmood and Mohd. Ghazali, Normah (2009) Counter-top thermoacoustic refrigerator - an experimental investigation. In: The 10th Asian International Conference on Fluid Machinery Conference (10th AICFM), 2009, Berjaya Times Square Hotel & Convention Centre, Kuala Lumpur.

Ariyono, Sugeng (2009) Intellingent electromechanical continuously variable transmission ratio controller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

As’Arry, Azizan (2009) Experimental design, analysis and simulation of human-like hand tremor behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Assylkhanov, Zhandos (2009) Solar water heating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Awang Sh'ri, Dayangku Noorfazidah (2009) Effect of surface pretreatments on the deposition of polycrystalline diamond on silicon nitride substrates using hot filament chemical vapor deposition method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ayob, A. B. and Tamin, M. N. and Elbasheer, M. Kabashi (2009) Pressure limits of thick-walled cylinders. In: IMECS 2009: International Multi-Conference Of Engineers And Computer Scientists, Vols I And II. Lecture Notes in Engineering and Computer Science . Int Assoc Engineers-IAENG, China, pp. 1649-1654. ISBN 978-988-17012-2-0

B

Badreddin, Giuma S. K. and Kahar, Osman and Abdul Kadir, Mohamed Rafiq (2009) Numerical modeling of fusiform aneurysm with high and normal blood pressure. In: Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. Institute of Electrical and Electronics Engineers, New York, pp. 270-275. ISBN 978-076953648-4

Baharin, Nor Hatini and Abdul Rahman, Roslan (2009) Effect of accelerometer mass on thin plate vibration. Jurnal Mekanikal (29). pp. 100-111. ISSN 0127-3396

Baharudin, Bakhtiar Ariff (2009) Further validations of the hydrodynamic force coefficients for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bero, Anuar (2009) Performance prediction for high speed craft. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bodaghi, Behnam (2009) Six degrees of freedom motions of a spar platform in irregular waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Che Puan, Othman and Roshandeh, Arash Moradkhani and Joshani, Majid (2009) Artificial neural network model of traffic operations at signalized junction in Johor Bahru, Malaysia. In: Proceedings of the 13th WSEAS International Conference on Circuits - Held as part of the 13th WSEAS CSCC Multiconference. World Scientific And Engineering Acad And Soc, Athens, Greece, pp. 219-223. ISBN 978-960474096-3

Che Sidik, Nor Azwadi (2009) A 3D lattice bgk scheme for simulation of thermal flow in cubic cavity. European Journal of Scientific Research, 37 (1). pp. 49-57. ISSN 1450-216X

Che Sidik, Nor Azwadi (2009) Lattice boltzmann simulation of natural convection and fluid flow around a heated cylinder in an enclosed square. Journal of Materials Sciences and Engineering, 3 (8). pp. 44-48. ISSN 1934-8959

Che Sidik, Nor Azwadi (2009) Prediction of natural convection in a square cavity with partially heated from below and symmetrical cooling from sides by the finite difference lattice Boltzmann method. European Journal of Scientific Research, 35 (3). pp. 347-354. ISSN 1450-202X

Che Sidik, Nor Azwadi and Abdul Munir, Fudhail (2009) Efficient mesh for driven square cavity. In: Taman Safari, Bogor, Indonesia, 2009, The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009.

Che Sidik, Nor Azwadi and Ng, Chee Horng (2009) Lattice boltzmann modelling of microchannel flow. Journal of Materials Science and Engineering, 3 (12).

Che Sidik, Nor Azwadi and Nik Mu'tasim, Muhammad Ammar (2009) A study of transient flow in a lid-driven square cavity. In: The 2nd International Meeting on Advances in Thermo-Fluids (IMAT) 2009, 2009, Taman Safari, Bogor, Indonesia.

Che Sidik, Nor Azwadi and Osman, Shahrul Azmir (2009) An initial study of coupled finite element Lattice Boltzmann Simulation Scheme. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Che Sidik, Nor Azwadi and Samion, Syahrullail (2009) Lattice Boltzman numerical prediction of flow behavior downstream of cylinder blockage at various Reynolds numbers. World Academy of Science, Engineering and Technology, 26 . pp. 7-11. ISSN 2010-376X (Prints); 2010-3778 (Electronic)

Che Wan Othman, Che Wan Mohd. Noor (2009) Manoeuvring prediction of offshore supply vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cheah, Chee Pei (2009) A comparison study of the commercial solar systems materials and its applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chee, Ailing (2009) Facility layout improvement using systematic layout planning (SLP) and arena. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chew, Li Ling (2009) Process improvement using six sigma methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chiew, Y. S. and Abdul Jalil, M. K. and Hussein, M. (2009) Motion cues visualisation of a motion base for driving simulator. In: 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008. Institute of Electrical and Electronics Engineers, New York, 1497 -1502. ISBN 978-142442679-9

Chiew, Yeong Shiong (2009) Design of a six degree of freedom motion platform for vehicle driving simulator application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

D

Dahalan, Md. Nizam and Su, Vin Cent and Ammoo, Mohd. Shariff (2009) Control of vibrational power input to semi-infinite anisotropic beam. Jurnal Mekanikal (28). pp. 28-43. ISSN 0127-3396

Dahalan, Md. Nizam and Su, Vin Cent and Ammoo, Mohd. Shar (2009) Development of a computer program for rocket aerodynmic coefficients estimation. Jurnal Mekanikal, 28 . pp. 28-43. ISSN 0127-3396

Delgado Hernandez, David Joaquin and Kuan, Yew Wong and Rivera, Sonia De La Torre and Tellez, Nelly Rigaud and Velarde, Jesus Ismael Sanchez and Gaxiola, Daniela Martinez and Gutierrez, Jesus Mario Castro and Aguilera, Efren Ordonez and Mendiola, Jessica Fabiola (2009) A case study on knowledge management adoption in Mexico. In: 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009. IEEE, New York, USA, pp. 313-316. ISBN 978-0-7695-3653-8

E

El Dien Mansour Saqr, Khalid Mohammed Mohieel and Sies, Mohsin M. and Abd Wahid, Mazlan (2009) Analyzing the effect of free stream turbulence on gaseous non-premixed flames. In: Asian International Conference on Fluid Machinery (10th AICFM), 2009, Hotel Berjaya Times Square & Convention Centre, KL.

Elbasheer, Mohammed Kabashi (2009) Influence of autofrettage on pressure limits and fatigue life of pressurized thick - walled cylinders. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elfiano, Eddy (2009) The effect of chamber length and hot air temperature on pulse drying characteristic of aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elita Amrina, Elita Amrina (2009) Manufacturing performance measurement tool for small and medium-sized enterprises. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

F

Farid, Ali Akhavan and Sharif, Safian and Namazi, Hamidreza (2009) Effect of machining parameters and cutting edge on surface integrity when driling and hole making in Inconel 718. SAE International Journal of Materials and Manufacturing, 2 (1). pp. 564-569. ISSN 1946-3979

Fiedler, T. and Belova, I. V. and Öchsner, A. and Murc, G. E. (2009) Non-linear calculations of transient thermal conduction in composite materials. Computational Materials Science, 45 (2). 434 -438. ISSN 0927-0256

Fiedler, Thomas and Löffler, Ralf B. and Bernthaler, Timo and Winkler, R. and Belova, Irina V. and Murch, Graeme E. and Öchsner, Andreas (2009) Numerical analyses of the thermal conductivity of random hollow sphere structures. Materials Letters, 63 (13-14). 1125 -1127. ISSN 0167-577X

Fiedler, Thomas and Solórzano, Eusebio and Garcia-Moreno, Francisco and Öchsner, Andreas and Belova, Irina V. and E. Murch, Graeme (2009) Lattice Monte Carlo and experimental analyses of the thermal conductivity of random-shaped cellular aluminum. Advanced Engineering Materials, 11 (10). pp. 843-847. ISSN 1438-1656

Fon, Chew Wei (2009) Solving equal size facility layout problems using bees algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G

G. Khalifa, Alsalihin (2009) Lost foam casting of aluminium - silicon (LM6) cast alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Guai, Yeu Kae (2009) Turbine blade crack detection using vibration testing methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

H

Hamzah, E. and Kanniah, M. and Harun, M. (2009) Effect of beta phase on room to high temperature mechanical properties of as-cast gamma titanium aluminide. Mechanics of Advanced Materials and Structures, 16 (5). pp. 384-389. ISSN 1537-6494

Haron, Habibah and Mohd. Shaharoun, Awaluddin and Harun, Hafizah (2009) The learning issues in engineering statics. The International Journal of Science in Society, 1 (2). pp. 121-136. ISSN 1836-6236

Haron, Habibah @ Norehan and Mohd. Shaharoun, Awaluddin (2009) The pedagogical issues in engineering statics. In: International Conference on Engineering and Education in the 21St Century (ICEE 2009), 23-25 March 2009, Hotel River Majestic, Kuching, Sarawak.

Harun, Mohd. Ruzi and Muhamad, Norhamidi and S., Abu Bakar and Jamaludin, Khairur Rijal and M. N., Nor Hafiez and Ahmad, Sufizar and Ibrahim, Mohd. Halim I. and Murtadhahadi, Murtadhahadi (2009) A review of workability of wrought magnesium alloys. In: Advanced Manufacturing Research Group Seminar, July 2009, Kajang, Selangor.

Harun, Mokhtar N. and Wang, F. C. and Jin, Z. M. and Fisher, J. (2009) Long-term contact-coupled wear prediction for metal-on-metal total hip joint replacement. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (7). 993 -1001. ISSN 1350-6501

Harun, W. S. W. and Safian, S. and Idris, Mohd. Hanafi (2009) Evaluation of ABS patterns produced from FDM for investment casting process. In: Computational Methods and Experiments in Materials Characterisation IV. WIT Press, pp. 319-328. ISBN 978-184564189-4

Hasan, Mohd. Faizal (2009) Physical and combustion characteristics of densified palm biomass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemi-Dehkordi, S. M. and Mailah, Musa and Abu Bakar, Abd. Rahim (2009) Implementation of active force control to disc brake for noise-free performance. International Review of Mechanical Engineering, 3 (4). pp. 481-488. ISSN 1970-8734 (print) ; 1970-8742 (online)

Hashemi-Dehkordi, Sayed-Mahdi and Mailah, Musa and Abu Bakar, Abd Rahim (2009) An active control method to reduce friction induced vibration caused by negative damping. Jurnal Mekanikal (29). pp. 19-34. ISSN 0127-3396

Hassan, Mohd. Firdaus (2009) Vibration suppression of handheld tool using intelligent active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hossein Hosseini, Seyed Mohammad (2009) Numerical characterization of perforated metallic hollow sphere structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyed Mohammad Hossein and Ochsner, Andreas (2009) A comparative numerical study of the stress states in flat and cylindrical lap joints. Journal of Adhesion Science and Technology, 23 (10-11). pp. 1369-1382. ISSN 0169-4243

Huajiang, Ouyang and Abu Bakar, Abd. Rahim and Li, Lijie (2009) A combined analysis of heat conduction, contact pressure and transient vibration of a disk brake. 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009. (Article no. 5169364), 51 (1&2). pp. 190-206.

Husaini, Mohd. Zamri (2009) The develpment of a computer-based-information system of sustainable legal requirement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husein, Abdul Chalid (2009) Model for mixed sea and inland port. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husin, Norafifah (2009) Application of design of experiment techniques in the two step pretreatment proses for diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussein, Ahmed Yussuf (2009) Development of product life - cycle cost analysis tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussein, M. and As'arry, A. and Md. Zain, M. Z. and Mailah, M. and Abdullah, M. Y. (2009) Experimental study of human hand-arm model response. In: 2009 6th International Symposium on Mechatronics and its Applications. Article number 5164823 . IEEE, pp. 1-6. ISBN 978-142443481-7

Hussein, Mohamed and Md. Zain, Mohd. Zarhamdy and Ahmad, Robiah and Abdullah, Mohd. Yunus (2009) Real-time machine controller verification and simulation using control signals emulation. In: 2009 6th International Symposium on Mechatronics and its Applications, ISMA 2009. Institute of Electrical and Electronics Engineers, New York, pp. 1-6. ISBN 978-142443481-7

I

Ibrahim, Mohd. Halim Irwan and Muhamad, Norhamidi and Sulong, A. B. and Jamaludin, Khairur Rijal and Mohamad Nor, Nor Hafiez and Ahmad, Sufizar (2009) Rheological characterization of water atomised stainless steel powder for micro metal injection molding. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Ismail, A. R. and Rani, M. R. A. and Makhbul, Z. K. M. and Sopian, K. and Tahir, M. M. and Ghani, J. A. and Meier, C. (2009) Optimization of environmental factors: a study at Malaysian automotive industry. European Journal of Scientific Research, 27 (4). 500 -509. ISSN 1450-202X

Ismail, A. R. and Rani, M. R. A. and Makhbul, Z. K. M. and Sopian, Kamaruzzaman and Md. Deros, Baba (2009) Thermal comfort assessment and optimization of environmental factors by using taguchi method. American Journal of Applied Sciences, 6 (9). 1731 -1741. ISSN 1546-9239

Ismail, Asmawi (2009) Risk factors for supply chain management of fast container shipping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Azman (2009) Small boat identification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Siti Haida (2009) Application of ergonomics in reducing product quality problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

J

Jafari, Arash (2009) Optimization of a circular microchannel heat sink using entropy generation minimization method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahanabadi, Hossein and Mailah, Musa and Md. Zain, Mohd. Zarhamdy (2009) Active control of a robotic arm with pneumatic artificial muscle actuator. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Jamal, Siti Khalijah (2009) Wire electro-discharge machining of titanium alloy (TI6AL4V) using brass and zinc coated brass wires. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaluddin, Hishamuddin (2009) Design and development of a magnetorheological shock absorber for automotive applications. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Jamaludin, K. R. and Muhamad, N. and Ab. Rahman, M. N. and M. Amin, S. Y. and Ahmad, S. and Ibrahim, M. H. I. (2009) Sintering parameter optimisation of the SS316L Metal Injection Molding (MIM) compacts for final density using taguchi method. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Jamaludin, Khairur Rijal (2009) Kesan saiz dan bentuk partikel serbuk SS316l terhadap parameter pengacuanan suntikan logam menggunakan rekabentuk eksperimen. PhD thesis, Universiti Kebangsaan Malaysia, Fakulti Kejuruteraan dan Alam Bina.

Jamaludin, Khairur Rijal (2009) Sintering parameter optimization with quality engineering technique : best flexure strength. In: 3rd Powder Metallurgy Symposium & Exhibition 2009, 12-13 August 2009, Kuala Lumpur, Malaysia. (Unpublished)

Jamaludin, Khairur Rijal and Muhamad, N. and Ab. Rahman, M. N. and Amin, S. Y. M. and Ahmad, S. and Ibrahim, M. H. I (2009) Taguchi method for optimising the sintering parameter of the Metal Injection Moulding (MIM) compacts. In: International Conference on Flexible Automation and Intelligent Manufacturing, 6-8 July 2009, University of Teeside, Middlesbrough, United Kingdom.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd. Nizam and Ahmad, Sufizar and Irwan Ibrahim, Mohd. Halim and Mohamad Nor, Nor Hafiez (2009) Orthogonal array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 Oktober 2009, Kuala Lumpur, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Abolhasani, Hooman and Murtadhahadi, Murtadhahadi and Ab. Rahman, Mohd. Nizam (2009) An influence of a binder system to the rheological behavior of the SS16l metal injection molding (MIM) feedstock. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Jaswadi, Farizana (2009) Experimental and finite element investigation of dynamic behavior of chassis-PCB assembly of electronic products. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Johari, Anwar and Hashim, H. and Rozainee, M. (2009) Geometrical design of stand pipe air distributors for the combustion of municipal solid waste in a fluidised bed. Jurnal Teknologi, 50 (F). pp. 79-88. ISSN 2180-3722

K

Karimian, Majid and Ourdjini, Ai and Idris, Mohd. Hasbullah and A. Asmael, Mohammed Bsher (2009) Effect of pouring temperature and melt treatment of AL-Si LM6 alloy (LFC) on microstructure. In: International Conference on Advanced in Materials and Processes Technologies (AMPT 2009), 2009, Hotel Legend, Kuala Lumpur.

Khalid, Khairul Azli (2009) Numerical solution to the incompressible navier stokes equations utilizing a spectral method in a stretched coordinate system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khattak, Muhammad Adil (2009) Effects of absorbed hydrogen and thermal exposure on mechanical properties, crack opening and fatigue crack propagation of welded steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khoo, Chun Yong (2009) Ultrasonic machining, lapping and polishing of neodymium doped yttrium aluminum garnet laser crystal rod. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koh, Ching Hao (2009) An architecture for client-server based control chart patterns recognition system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Koloor, Seyed Saeid Rahimian (2009) Damage mechanics of composite laminates subjected to cyclic flexual load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Komarudin, Komarudin (2009) An improved ant system algorithm for unequal area facility layout problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kuah, Chuen Tse (2009) Lean manufacturing through value stream mapping and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

L

Lai, Zheng Bo (2009) Classical and damage mechanics-based models for lead-free solder interconnects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lo, Teck Yin (2009) Temperature distribution and displacement analysis of fillet joint by using FEA software and experimental technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Loghmanian, S. Mohammad Reza and Ahmad, Robiah and Jamaluddin , Hishamuddin (2009) Multi-objective optimization of NARX model for system identification using genetic algorithm. In: 2009 1st International Conference on Computational Intelligence, Communication Systems and Networks, CICSYN 2009. Institute of Electrical and Electronics Engineers, New York, 196 -201. ISBN 978-076953743-6

Luhat, Marya (2009) Lean manufacturing aplication and implementation in a composite manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. Nor, Fethma (2009) Mechanics of solder joints and solder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M. Samsuri, Saiful Farhan and Ahmad, Robiah and Hussein, Mohamed and Abdul Rahim, Abd. Rahman (2009) Wireless system for monitoring environmental variables of rain shelter house (RSH). In: 2009 First International Conference on Computational Intelligence, Communication Systems and Networks. Institute of Electrical and Electronics Engineers, New York, pp. 119-124. ISBN 978-0-7695-3743-6

M. Saqr, Khalid and S. Aly, Hossam and A. Wahid, Mazlan and M. Sies, Mohsin (2009) Numerical simulation of confined vortex flow using a modified k-£ turbulence model. CFD Letters, 1 (2). pp. 87-94. ISSN 2180-1363

M. Saqr , Khalid and C. Sidik , Nor Azwadi and Aly , Hossam S. and A. ElDrain, Yehia (2009) Uncharacteristic phenomenon in the nonisothermal taylor-couette flow. In: 2009 International Conference on Signal Processing Systems, ICSPS 2009. Institute of Electrical and Electronics Engineers, New York, 879 -883. ISBN 978-076953654-5

Mahat, M. Mazwan and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Taib, Ishkrizat (2009) Study on the effect of stenting to aneurysms deformation. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Mahjuddin, Mohd. Mursyid (2009) Prediction of an added resistance and speed loses for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, M. and Jahanabadi, H. and Zain, M. Z. M. and Priyandoko, G. (2009) Modelling and control of a human-like arm incorporating muscle models. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 223 (7). pp. 1569-1577. ISSN 0954-4062

Mailah, Musa and Hashemi-Dehkord, Sayed Mahdi and Abu-Bakar, Abd. Rahim (2009) A robust active control method to reduce brake noise. In: 2008 IEEE International Conference on Robotics and Biomimetics, ROBIO 2008, 21st - 26th Feb 2009, Bangkok, Thailand.

Mailah, Musa and Hashemi-Dehkordi, Sayed Mahdi and Bakar, Adnall R. A. (2009) An active control method to reduce the effect of negative damping in disk brake system. In: 2009 Innovative Technologies in Intelligent Systems and Industrial Applications, CITISIA 2009. Article number 5224246 . Elsevier, pp. 34-39. ISBN 978-142442887-8

Mailah, Musa and Jahanabad, Hossein and Md. Zain, Mohd. Zarhamdy (2009) Active force control of a fluidic muscle system using fuzzy logic. In: IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM. Article number 5229778 . Elsevier, pp. 1970-1975. ISBN 8-142442853-3

Mailah, Musa and Md. Zain, Mohd. Zarhamdy and Jahanabadi, Hossein and Abdul Rahim, Mohammad Akmal Baharain (2009) Mathematical modelling and simulatrion of the human arm for control purpose. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mak, Weng Yee and Asri Ibrahim, Kamarul (2009) Fault detection and diagnosis using correlation coefficients between variables. Jurnal Teknologi Siri, 50 (F). pp. 1-13. ISSN 2180-3722

Mansor, Muhammad Hatifi (2009) Intelligent active force control method applied to precise machining operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Muhammad Nasuha (2009) Initial investigation of ship resistance at river mouth area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Darus, Intan Zaurah and Mailah, Musa and A. R., Tavakolpour (2009) Active vibration control of a rectangular flexible plate structure using high gain feedback regulator. International Review of Mechanical Engineering (I.R.E.M.E), 3 (5). pp. 579-587. ISSN 1970-8734

Memary, Reza (2009) Development of a model for integration of assembly and disassembly in life cycle management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Misson, Mailin and Haron, Roslindawati and Ahmad Kamaroddin, Mohd. Fadhzir and Saidina Amin, Nor Aishah (2009) Pretreatment of empty palm fruit bunch for lignin degradation. Jurnal Teknologi, 50 (F). pp. 89-98. ISSN 2180-3722

Moh. Elatari, Duw Mabrouk Ali (2009) Evaluation of shear angle value using quick stop device and established formula. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Nor, N. H. and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan (2009) Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Mohamad Nor, Nor Hafiez and M., Norhamidi and Ahmad, Sufizar and Ibrahim, Mohd. Halim I. and Murtadhahadi, Murtadhahadi and Jamaludin, Khairur Rijal (2009) Feedstock characterisation of titanium alloy mix with palm stearin binder system for metal injection moulding. In: Advanced Manufacturing Research Group Seminar, 2009, Kajang, Selangor.

Mohamad Zin, Mohd Rody (2009) The simulation of droplet motion by using lattice boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Ghazali, Mohamed Haryzul (2009) The improvement of ride comfort performance in passenger road vehicles using active suspension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Kamar, Haslinda (2009) Computerised simulation of automotive air conditioning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Samsuddin, Norzilawaty (2009) Application of quality function deployment in multimedia integrated telephone kiosk design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri and Abdul Mookmin, Muhamad Shukri and Samat, Ismail (2009) Emission reduction from burner system by varying swirler blade angle. Jurnal Teknologi F (51F). pp. 121-130. ISSN 0127-9696

Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin and Dahalan, Md. Nizam and Mamat, Rizalman (2009) Propelan pepejal kalium nitrat difabrikasi kaedah pengacuanan mampat. Jurnal Teknologi, 50 (F). pp. 41-51. ISSN 2180-3722

Mohd. Muzamir Mahat (2009) Interfacial reactions between lead-free solders and electroless nickel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Nasir, Mohd. Nazri and Fritz, Olaf-Lehman and Stanislav, Gorb (2009) Force and deformation modeling of the flapping wing: Calliphora Vicina. Jurnal Mekanikal (28). pp. 57-84. ISSN 0127-3396

Mohd. Ramli, Mohd. Hanif (2009) Modelling and simulation of a microrobotic system with active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Salleh, Farrahshaida (2009) CAD and document of inspection jig for an automotive part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Shawal, Mohd. Syahar (2009) Schlieren imaging technique for high speed combustion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohmad Zakwan @ Zakuan, Norhayati (2009) Structural analysis of total quality management, ISO/TS16949 and organizational performance in Malaysian and Thailand automotive industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokri, Kamarul Nasser (2009) Development of a web-based design and database for traditional fishing boats in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhalim, Noor Muhammad Feizal and Krishnan, Subramanian and Mohd. Jaafar, Mohammad Nazri and Wan Ali, Wan Khairuddin (2009) Design and theoretical performance prediction of hydrogen peroxide hybrid thruster. In: Conference on Aerospace Technology of the XXI Century (AEROTECH2009), 2009, Novotel Kuala Lumpur City Center.

Mukhtar, Zaimi Zainal (2009) A comparison of fatigue levels among Malaysian seafarers of different maritime sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Musa, Ismail (2009) Static and dynamic analysis of a ladder frame truck chassis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustaffa Kamal, Iwan Zamil (2009) Further development of ship added resistances in head waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

N

Nassirnia, Parisma (2009) Evaluation of strategies to achive labor flexibility by using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Chee Horng (2009) Lattice boltzmann method on flow in microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Poh Lay (2009) Model for throughput performance measures and monitoring system in semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngali, Mohd. Zamani and Osman, Kahar and Padzillah, Muhamad Hasbullah (2009) Accuracy and efficiency improvements of the navier stokes equation using modified splitting method. In: European Modelling Symposium 2009 (EMS 2009), 2009, Athens, Greece.

Nik Ibrahim, Nik Mohd. Izual (2009) Development of isotropic free energy latice boltzmann scheme for multiphase simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

O

Ong, Cheow Hong (2009) Design improvement of existing product using life cycle assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Oschner, Andreas and Nechaev, Yu S. and Alexeeva, O. K. (2009) Analytical review on the hydrogen multilayer intercalation in carbonaceous nanostructures : relevance for development of super-adsorbents for m fuel-cell-powered vehicles. Journal of Nanoscience and Nanotechnology, 9 (6). pp. 3949-3958. ISSN 15334880

Osman, Hassan and Tamin, Mohd. Nasir (2009) Creep response of austenitic stainless steel foils for advanced recuperator applications. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

Osman, Shahrul Azmir and Che Sidik, Nor Azwadi (2009) UTOPIA finite different lattice boltzmann method for simulation natural convection heat transfer from a heated concentric annulus cylinder. European Journal of Scientific Research, 38 (1). pp. 63-71. ISSN 1450-216X

Osman, Sharul Azmir (2009) Development of finite difference lattice boltzmann scheme for the computation of natural convection heat transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

P

Padzillah, Muhammad Hasbullah (2009) Engineering analysis on the conceptual design of portable hand truck for staircase. In: 2nd International Meeting of Advances in Thermofluids - IMAT 2009, 2009, Universitas Indonesia.

Pang, Yong Jia (2009) The effect of heat treatment on the mechanical properties of copper - management alloys for marine applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Poobalan, Prakash (2009) Equipment and process performance improvement using automated monitoring system. Masters thesis, Universiti Teknologi Malaysia.

Prawoto, Yunan and Ibrahim, K. and Wan Nik, Wan Mohd. Norsani (2009) Effect of pH and chloride concentration on the corrosion of duplex stainless steel. Arabian Journal For Science and Engineering, 34 (2C). 115 - 127. ISSN 1319-8025

Priyandoko, Gigih (2009) Intelligent active force control of a vehicle suspension system. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

R

Rahim, Erween A. and Sharif, Safian (2009) Evaluation of tool wear mechanism of TiAlN coated tools when drilling Ti-6Al-4V. International Journal of Manufacturing Technology and Management, 17 (4). p. 327. ISSN 1368-2148

Rahmayanti, Dina (2009) Effect of level of difficulties on job performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Raja Hamzah, Raja Ishak and M. B. A., D. (2009) The influence of operating condition on acoustic emission (AE) generation during meshing of helical and spur gear. Tribology International, 42 (1). pp. 3-14. ISSN 0301679X

Ramanathan, Geeva Raj (2009) Total Quality Management (TQM) at an original device manufacturer (ODM) a case study : failure analysis depertment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramlee , Faizir (2009) Development of web based e-drawing and product data sharing system in electronic industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Muhamad (2009) Alternative strip method for a laterally drifting ship in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Roslee, Ahmad Azmeer (2009) Productivity measurement in Malaysia shipbuilding industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

S. Aly, Hossam and M. Lazim, Tholudin and A. Eldrainy, Yehia and Mohd. Jaafar, Mohammad Nazri (2009) Mathematical modelling of droplet atomization using the population balance equation. In: 2009 International Conference on Signal Processing Systems, ICSPS 2009. Institute of Electrical and Electronics Engineers, New York, 955 -959. ISBN 978-076953654-5

Saeed Ahmed, Radwan Ahmed (2009) Performance and evaluation of graphite when machining hardened steel ASSAB 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safizadeh, Mohammadreza (2009) Optimal placement of sensor and actuator for active vibration control of flexible structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salim, M. A. and Md. Zain, M. Z. and Abu-Bakar, A. R. and Noordin, A. (2009) Simulation of an input shaping scheme technique to investigate unwanted noise and vibration in wiper blade. Journal of Mechanical Engineering and Technology, 1 (1). pp. 1-13. ISSN 2180-1053

Salim, Mohd. Azli (2009) Input shaping controller for flexible wiper system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samion, Syahrullail and Che Sidik, Nor Azwadi and Ridzuan, M. J. M and Seah, W. B. (2009) The effect of lubricant viscosity in cold forward plane strain extrusion test. European Journal of Scientific Research, 38 (4). pp. 545-555. ISSN 1450-216X

Saqr, Khalid M. and Musa, Md. Nor (2009) Critical review of thermoelectrics in modern power generation applications. Thermal Science, 13 (3). 165 -174. ISSN 0354-9836

Sarip, Rohana (2009) Effect of tool path generation when machining mold-cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saw, Chun Lin and Abu Bakar, Abd. Rahim and Wan Harujan, Wan Mohd. Musyris and Abd. Ghani, Badri and Jamaluddin, Mohd. Rahimi (2009) Suppressing disc brake squeal through structural modifications. Jurnal Mekanikal (29). pp. 67-83. ISSN 0127-3396

Saw, Chun Lin (2009) Squeal suppression approaches of a disc brake assembly. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Seth, Aminuddin (2009) A comparison study between a new developed manufacturing module reclaim process and current module reclaim process towards a sustainable manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Seyedmahmoud, Seyedrasoul (2009) Mechanical properties of hydroxyapatite coating in biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaharuzaman, Mohd. Adrinata (2009) An experimental study of steering wheel vibration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shakir, Noor Adila Aluwi (2009) Application of design of experiment technique in the single step pretreatment process for diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sharif, Safian and Kurniawan, Denni and Mohd, Hisyam and Orady, Elsayed (2009) Performance evaluation of vegetable oil as an alternative cutting lubricant when end milling stainless steel using tiain coated carbide tools. In: Transactions of the North American Manufacturing Research Institute of SME. Society of Manufacturing Engineers, Canada, 9 -14. ISBN 978-087263862-4

Sharif, Safian and Mohd. Yusof, Noordin and Idris, Mohd. Hasbullah and Ahmad, Zainal Abidin and Sudin, Izman and Ripin, Adnan and Mat Zin, Azrul Hisyam (2009) Feasibility study of using vegetable oil as a cutting lubricant through the use of minimum quantity lubricant during machining. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Sharmugham, Thinesh Kumar (2009) Refined numerical simulation of the mechanical behaviour of hollow sphere structures. Masters thesis, Universiti Teknologi Malaysia.

Shiong, Chiew Yeong and Abdul Jalil, Mohamad Kasim and Hussein, Mohamed (2009) Motion visualisation and control of a driving simulator motion platform. In: 2009 6th International Symposium on Mechatronics and its Applications, ISMA 2009. Institute of Electrical and Electronics Engineers, New York, 470 -474. ISBN 978-142443481-7

Shirazitabar, Seyed Ahmad Ali (2009) Entropy analysis of a thermoacoustic stack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sim, Bee Moi (2009) Manufacturing lead time improvement through lean kaizen event. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soh, Wen Hann (2009) Effect of oil palm fibre addition on the mechanical properties of shell mould investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soh, Wen Hann (2009) Effect oil palm fibre addition on the mechanical properties of shell mould investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Speich, Marco and Rimkus, Wolfgang and Merkel, Markus and Öchsner, Andreas (2009) Large deformation of metallic hollow spheres. In: Materials Science Forum. Trans Tech Publications Ltd., pp. 105-117. ISBN 978-087849320-3

Sujatmoko, Agus (2009) An accurate constrained interpolated Ppofile or solving BGK Boltzmann equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syahrullail, Samion and Kamitani, Shunpei and Nakanishi, K. (2009) Investigation of frictional constraint effect of RBD palm stearin as lubricant by plane strain extrusion. European Journal of Scientific Research, 35 (4). 534 -542. ISSN 1450-202X

Syahrullail, Samion and Sidik, C. S. C. and Seah, W. B. (2009) Plasticity analysis of pure aluminium extruded with an RBD palm olein lubricant. Journal of Applied Sciences, 9 (19). 3581 -3586. ISSN 1812-5654

T

Tamin, Mohd. Nasir and Bo, Lai Zheng and Keat, Loh Wei (2009) Damage mechanics of solder/IMC interface fracture in pb-free solder interconnects. In: 11th Electronics Packaging Technology Conferenre (EPTC 2009), 2009, Hotel Shangri-La, Singapura.

Tan, Hai Hong (2009) Computer simulation and design of composite fire door under elevated temperature using MSC nastran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Soon Lam (2009) Design improvement using life cycle costing methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tavakolpour, Ali Reza and Mat Darus, Intan Z. and Mailah, Musa (2009) Modeling and simulation of an active vibration control system for a flexible structure using finite difference method. In: Proceedings - 2009 3rd Asia International Conference on Modelling and Simulation, AMS 2009. Institute of Electrical and Electronics Engineers, New York, 448 -453. ISBN 978-076953648-4

Tavakolpour, Alireza Reza and Mat Darus, Intan Zaurah and Mailah, Musa (2009) Numerical simulation of a flexible plate system for vibration control. WSEAS Transactions on Systems and Control, 4 (3). 119 -128. ISSN 1991-8763

Tham, Sook Chan and Yusof, Sha’ri M. (2009) Quality improvement using taguchi method in a manufacturing company. Jurnal Mekanikal (28). pp. 44-56. ISSN 0127-3396

Tharazi, Izdihar (2009) The effect of Ti-6AL-4V surface integrity using zinc coated wire in WEDM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tuan Abdullah, Tuan Amran (2009) Hydrogen production from catalytic ethanol reforming in supercritical water. PhD thesis, University of Waterloo.

U

Ujir, Mohd. Haffis (2009) Pulse combustion studies of propane and natural gas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

V

Vesenjak, M. and Ren, Z. and Fiedler, T. and Ochsner, A. (2009) Impact behavior of composite hollow sphere structures. Journal of Composite Materials, 43 (22). pp. 2491-2505. ISSN 0021-9983

Vesenjak, Matej and Ren, Zoran and Ochsner, Andreas (2009) Dynamic behaviour of regular closed-cell porous metals - computational study. International Journal of Materials Engineering Innovation, 1 (2). p. 175. ISSN 1757-2754

W

Wan Abd. Rahman, Wan Latif (2009) Application of lean manufacturing concept in service sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Winkler, R. and Merkel, M. and Öchsner, A. (2009) Experimental and numerical analyses of diffusion bonded hollow sphere structures. Materialwissenschaft und Werkstofftechnik, 40 (3). pp. 133-138. ISSN 09335137

Wong, Kuan Yew and Memary, Reza (2009) An investigation of the expectancy theory elements for motivating employees. In: 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009. Article number 5169359 . Elsevier, Singapore, pp. 286-290. ISBN 978-076953653-8

Wong, Kuan Yew and See, Phen Chiak (2009) A new minimum pheromone threshold strategy (MPTS) for max-min ant system. Applied Soft Computing, 9 (3). pp. 882-888. ISSN 1568-4946

Wong, Yu Cheng and Wong, Kuan Yew and Ali , Anwar (2009) Key practice areas of lean manufacturing. In: 2009 International Association of Computer Science and Information Technology - Spring Conference, IACSIT-SC 2009. Institute of Electrical and Electronics Engineers, New York, 267 -271. ISBN 978-076953653-8

Wong, Yun Hong (2009) Metal filling characteristics of aluminium lost foam casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Y

Y. M. Ragab, Salih (2009) Design and fabrication of ball-mill machine for producing active carbon powder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, I. M. and Farid, N. A. and Zainal, Z. A. and Horizon, G. B. and Azman, M. (2009) Preliminary investigation of a converted four-stroke diesel to alpha v-shaped stirling engine. Asian Journal of Applied Sciences, 2 (2). pp. 101-114. ISSN 1996-3443

Yusof, I. M. and Farid, N. A. and Zainal, Z. A. and Horizon, G. B. and Noriman, K. and Miskam, A. (2009) Design, fabrication and testing of a swirl burner for alpha v-shaped stirling engine. Asian Journal of Applied Sciences, 2 (6). pp. 475-485. ISSN 1996-3343

Z

Zakaria, Samsol Azhar (2009) Kite ship: perliminary investigation on power generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Samsol Azhar (2009) Kite ship: preliminary investigation on power generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakuan, N. M. and Saman, M. Z. M. (2009) Lean manufacturing concept: The main factor in improving manufacturing performance - a case study. International Journal of Manufacturing Technology and Management, 17 (4). 353 -363. ISSN 1368-2148

Zaman, Hainol Akbar (2009) Effect of tool path strategies of CAD/CAM operation in CNC milling of mold core component. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zamrah, Zarak Shaifuddin (2009) Cost analysis software development for injection moulding in the concurrent engineering environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ö

Öchsner, Andreas (2009) Guest editorial : Materials Letters special issue on hollow sphere structures. Materials Letters, 63 (13-14). pp. 1107-1108. ISSN 0167577X

Öchsner, Andreas (2009) On some conceptual considerations for the finite element simulation of the oxygen out-diffusion in Ag-MgO composites. Defect and Diffusion Forum, 283 . 1 -5. ISSN 1012-0386

Öchsner, Andreas and Hosseini, Seyed Mohammad Hossein and Merkel, Markus (2009) Numerical simulation of perforated hollow sphere structures (PHSS) to investigate mechanical properties. Eco-Materials Processing and Design X, 620 . pp. 275-278. ISSN 0255-5476

Öchsner, Andreas and Hosseini, Seyed Mohammad Hossein and Merkel, Markus (2009) Numerical simulation of thermal and mechanical properties of sintered perforated hollow sphere structures (PHSS). In: Iaeng Transactions On Engineering Technologies, Vol 3. AIP Conference Proceedings, 1174 . American Institute of Physics, USA, pp. 16-30. ISBN 978-0-7354-0713-8

Öchsner, Andreas and Mishuris, Gennady (2009) Modelling of the multiaxial elasto-plastic behaviour of porous metals with internal gas pressure. Finite Elements in Analysis and Design, 45 (2). pp. 104-112. ISSN 0168-874X