Universiti Teknologi Malaysia Institutional Repository

Effect of pH and chloride concentration on the corrosion of duplex stainless steel

Prawoto, Yunan and Ibrahim, K. and Wan Nik, Wan Mohd. Norsani (2009) Effect of pH and chloride concentration on the corrosion of duplex stainless steel. Arabian Journal For Science and Engineering , 34 (2C). 115 - 127. ISSN 1319-8025

Full text not available from this repository.

Official URL: https://www.researchgate.net/publication/238739911...

Abstract

Stainless steels are widely used as structural materials even in aggressive environments due to their good mechanical and corrosion properties. In particular, duplex (austenitic-ferritic) stainless steels are becoming common materials for oil and gas applications, specifically facilities that were built after the 1970s. This expansion in the utilization of such materials can be attributed to their excellent combination of properties, such as higher strength, good resistance to stress corrosion cracking, and comparable cost to conventional austenitic stainless steels. This research is mainly concerned about the corrosion performance of a duplex stainless steel alloy under several conditions using various pH and chloride concentrations at different temperatures. Corrosion rates and pitting morphology of the selected duplex stainless steel were systematically evaluated during this study. The effects of pH and chloride concentrations on the corrosion behavior of duplex stainless steel were carried out in accordance with UNS S32205. The effect of pH was has been determined by using different test solutions at different test temperatures. The duration of immersion tests were set in accordance to the ASTM G48 standard. However, the effect of chloride concentrations on the corrosion of the selected alloy is determined by pitting corrosion measurements using simple metallography and software analysis as well as PREN (Pitting Resistance Equivalent Number).

Item Type:Article
Uncontrolled Keywords:Chloride concentration; Corrosion; Duplex stainless steel; pH
Subjects:Unspecified
Divisions:Mechanical Engineering
ID Code:25124
Deposited By: Kamariah Mohamed Jong
Deposited On:14 Jun 2017 06:54
Last Modified:14 Jun 2017 06:54

Repository Staff Only: item control page