Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 287.

A

A. Aregia, Tarek Abdelhadi (2010) Computerized welding process selection and parameter determination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Hamid, Huzaimi (2010) Design, fabrication and testing of a semi-automatic welding fixture for circumferential joining cylinders using MIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. R., Ismail and M. Y. M., Yusof and N. K., Makhtar and B. M., Deros and Abd. Rani, Mat Rebi (2010) Optimization of temperature level to enhance worker performance in automotive industry. American Journal of Applied Sciences, 7 (3). 360 - 365. ISSN 1546-9239

Abd. Halim, Shahrizal (2010) Performance evaluation of nitrogen gas-assisted laser cutting on 316L austenitic stainless steel plate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Malik, Adi Maimin and Jamei, Saeed and Priyanto, Agoes and Che Sidik, Nor Azwadi (2010) Aerodynamic characteristics of wing of WIG catamaran vehicle during ground effect. WSEAS Transactions on Fluid Mechanics, 5 (3). 196 - 205. ISSN World Scientific and Engineering Academy and Society

Abd. Rahman, Muhammad Riza (2010) Numerical simulation and wind tunnel measurements of lateral aerodynamic characteristics on simplified automotive model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran (2010) Using imperialist competitive algorithm to find the optimum shape design of internally pressurized torispherical dome ends based on buckling pressure. International Journal of Engineering (IJE), 4 (5). pp. 387-398. ISSN 1985-2312 (Online)

Abdolahi, Ahmad (2010) High speed electroplating of nickel over stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdolahi , Hamed (2010) Effects of annealing on structure and magnetic properties of semiconductors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azliza (2010) Development of a ducted horizontal axis marine current turbine rotor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Ghafar, Alimi (2010) Optimizing crushing processing parameters of oil palm shell charcoal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kadir, Aini Zuhra and Xua, Xun and Hämmerle, Enrico (2010) Virtual machine tools and virtual machining-a technological review. Robotics and Computer-Integrated Manufacturing, 27 (3). pp. 494-508. ISSN 0736-5845

Abdul Kadir, Mohammed Rafiq (2010) Biomechanics of a lumbar section after disc arthroplasty. European Journal of Scientific Research, 39 (1). 22 - 28.

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Idrose, Al Hamzee (2010) Biomechanics of a lumbar section after disc arthroplasty. European Journal of Scientific Research, 39 (1). pp. 22-28.

Abdul Kadir, Mohammed Rafiq and Ochsner, Andreas and A., Syahrom (2010) Finite element analysis of idealised unit cell cancellous structure based on morphological indices of cancellous bone. Medical & Biological Engineering & Computing, 48 (5). 497 - 505. ISSN 0140-0118

Abdul Malik, Mohd. Maarif (2010) Modeling of dynamic response of desktop computer’s motherboard due to drop impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Nurul Ataillah and Ahmad, Robiah (2010) Biomechanical study and analysis on human motion using piezoelectric sensor for scavenging energy. Jurnal Mekanikal (31). pp. 30-45. ISSN 0127-3396

Abdullah, Arman Shah (2010) Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abraham, Arimokwu (2010) Numerical simulation of standing wave in an acoustic chamber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Abd. Rahim and Ouyang, Huajiang and Lee, Chiing Khaia and Abdullah, Mohd. Shahrulizam (2010) Thermal analysis of a disc brake model considering a real brake pad surface and wear. International Journal of Vehicle Structures & Systems , 2 (1). pp. 20-27. ISSN 0975-3060

Abu Bakar, Tuty Asma and Rahman, M. and Dowling, D. P. and Stokes, J. and Hashmi, M. S. J. (2010) Mechanical performance of the annealed NiTi Shape Memory Alloy coating onto 316L stainless bio-steel. Defect and Diffusion Forum, 297 . 365 - 369. ISSN 1662-9752

Adnan, Fadzilah (2010) Work improvement at an engine assembly line at car manufacturing plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adnan, Nazrul Hamizi (2010) Design and development of a portable onion peeler machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Mohamed Shaharoun, Awaluddin (2010) EDAS: software for end-of-life disassembly analysis. International Journal of Sustainable Design, 1 (3). 257 . ISSN 1743-8284 (Print); 1743-8292 (Electronic)

Afrooz, Iman Eslami (2010) Numerical investigation of composite materials with short fibers made of carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahamed, Ahmad Fauzi (2010) Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahdash, Abdelsalam I. S. (2010) Design of impressed current cathodic protection for steel immersed in freshwater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Fauzi and Hudha, Khisbullah and Imaduddin, Fitrian and Jamaluddin, Hishammudin (2010) Modelling, validation and adaptive pid control with pitch moment rejection of active suspension system for reducing unwanted vehicle motion in longitudinal direction. International Journal of Vehicle Systems Modelling and Testing (IJVSMT), 5 (4). pp. 312-345. ISSN 1745-6444

Ahmad, Md. Fauzi and Mohd. Yusof, Sha'ri (2010) Comparative study of TQM practices between Japanese and None-Japanese electrical and electronics companies in Malaysia: Survey Results. Total Quality Management & Business Excellence, 21 (1). 11 - 20.

Ahmad, Norhayati (2010) The study on the micro-pits location on the extrusion die surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Norhayati and Sueyoshi, Hidekazu (2010) Properties of Si3N4-TiN composites fabricated by spark plasma sintering by using a mixture of Si3N4 and Ti powders. Ceramics International, 36 (2). 491 -496. ISSN 0272-8842

Ahmad, Robiah and Mohd. Nor, Mohamad Fitri (2010) Parameter estimation of nonlinear discrete-time dynamic systems using genetic algorithm. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 97-120. ISBN 978-983-52-0545-3

Ahmad, Zaini and Thambiratnam, D. P. and Tan, Andy C. C. (2010) Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading. International Journal of Impact Engineering, 37 (5). 475 - 488. ISSN 0734-743X

Ahmad , Nurul Huda (2010) Finite element simulation of preforated hollow sphere composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Bakir, Azman (2010) Characteristics of motion errors of 3–Axis CNC vertical milling machines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahrari, Ayoob (2010) Application of design of experiment technique in the nickel-chromium electroplating process on WC-Co substrate prior HFCVD diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, M. and Hamzah, E. and Qazi, I. A. and Toff, M. R. M. (2010) Effect of cathodic arc PVD parameters on roughness of TiN coating on steel substrate. Current Applied Physics, 10 (2). 471 - 474.

Ali, M. and Hamzah, E. and Qazi, I. A. and Toff, M. R. M. (2010) Growth defects and surface roughness in TiN-coated tool steel at various N2 gas flow rates using cathodic arc PVD technique. Materials Science Forum, 636 (637). 965 - 970. ISSN 1662-9752

Ali, Mohd. Nizam (2010) Performance evaluation of wire electrode discharge machining (WEDM) On Inconel 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alir , Kartini (2010) The effects of musculoskeletal disorder on drivability among compact car drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alizadeh , Mina (2010) Biomechanical evaluation of spine posterior rigid fixations : a finite element study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ang, Liqi (2010) Simulation of sequencing rules in a five-similar-machine job shop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ani, Farid Nasir and Mohamad Nor, Noruzaima (2010) Energy index for palm oil processing in oil palm mills. International Journal of Quality and Innovation, 1 (2). pp. 112-123. ISSN 1756-6975 (Print); 1756-6983 (Electronic)

Anuar, Azman (2010) Investigation of laser cutting parameters on surface quality of stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arshad Adam, Salema and Ani, Farid Nasir (2010) Microwave pyrolysis of oil palm fibres. Jurnal Mekanikal : An International Journal (30). pp. 77-86. ISSN 0127-3396

Azman, Azri (2010) Performance evaluation of different process conditions when hard turning ASSAB 760. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azraie, Salahuddin (2010) Numerical simulation of heat transfer in blood vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Baharanchi , Ahmadreza Abbasi (2010) Simulation of turbulent swirling multiphase flow inside a pressure -swirl atomizer using volume of fluid model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahari, Adli (2010) Numerical solution of elastohydrodynamic lubrication with non-newtonian fluid flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behnam , Sarah (2010) Development of biomechanical risk assessment technique in patient handling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bhatti, Inamullah and Nor Kamarudin, Khairol Sozana and Qureshi, Khadija and Khalique Ansari, Qazi Abdul (2010) Polymeric membrane used in natural gas processing to separate carbon dioxide: the facing problems and solutions. Journal of Environmental Science and Engineering, 4 (1). pp. 25-32. ISSN 1934-8932

Boo, Nan Shing (2010) Interfacial reactions between lead- free solders and electroless nickel/ immersion gold (ENIG) surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Che Ani , Mohd. Norzaimi (2010) Implementations of lean production system in manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidek, Nor Azwadi and Idris, M. S. (2010) Mesoscale numerical approach to predict macroscale fluid flow problems. Journal of Applied Sciences, 10 (15). 1511 - 1524. ISSN 1812-5654

Che Sidek, Nor Azwadi and Irwan, M. A. M. (2010) Macro and mesoscale simulations of free convective heat transfer in a cavity at various aspect ratios. Journal of Applied Sciences, 10 (3). 203 -208. ISSN 1812-5654

Che Sidek, Nor Azwadi and M. S., Idris (2010) Finite different and lattice boltzmann modelling for simulation of natural convection in a square cavity. International Journal of Mechanical and Materials Engineering, 5 (1). 80 - 86. ISSN 1823-0334

Che Sidek, Nor Azwadi and Mohd. Irwan, M. A. (2010) Simplified mesoscale lattice boltzmann numerical model for prediction of natural convection in a square enclosure filled with homogeneous porous media. WSEAS Transactions on Fluid Mechanics, 5 (3). 186 - 195. ISSN 1790-5087

Che Sidek, Nor Azwadi and Mohd. Yasin, Mohd. Fairus and Samion, Syahrullail (2010) Virtual study of natural convection heat transfer in an inclined square cavity. Journal of Applied Sciences, 10 (4). 331 -336. ISSN 1812-5654

Che Sidek, Nor Azwadi and Nik Izual, N. I. (2010) Lattice boltzmann numerical scheme for the simulation of natural convection in an inclined square cavity. WSEAS Transactions on Mathematics, 9 (6). 417 - 426. ISSN 1109-2769

Che Sidik, Nor Azwadi and Mohd. Zin, Mohd. Rody (2010) Modeling of dynamics of droplet using the lattice boltzmann method. International Journal of Mechanical and Materials Engineering, 5 (2). 276 - 281. ISSN 1823-0334

Che Sidik, Nor Azwadi and Nor Hamizan, M. S. and Ammar, N. M. (2010) Assessment of lattice boltzmann simulation scheme in predicting two-phase (Solid-Fluid) flow. Jurnal Mekanikal (31). pp. 11-16. ISSN 0127-3396

Cherraghizanjani, Alireza (2010) Development of measurement and behavior classification in tremor patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chia, Chon Yue (2010) Performance evaluation of diamond cutting tools when ultra precision grinding spherical part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chong, Kuan Eng (2010) Technology entrepreneur development at graduate training in Malaysia institute of higher learning. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Chong , Ban Hwa (2010) Sustainable furniture design concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ch’Ng Emily, Huey Ling (2010) Musculoskeletal disorders among offshore-structure fabrication yard workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

E

Eldrainy, Yehia A. and Aly, Hossam S. and Saqr, Khalid M. and Mohd. Jaafar, Mohammad Nazri (2010) A multiple inlet swirler for gas turbine combustors. International Journal of Mechanical Systems Science and Engineering, 2 (2). pp. 106-109. ISSN 1307-7473

Elia, Zulkifli (2010) Performance evaluation of lightning protection design software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Esfroshani, Mahdi Ramezanzadeh (2010) Analytical method for noise reduction of tire using wave propagation approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Eslami Harandi, Shervin (2010) The effect of calcium content and forging parameters on the properties of biodegradable MG-CA alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Etminan, Payam (2010) Design and development of diamond grinding wheel for ultra precision applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

F

Fallahiarezoodar , Ali (2010) Design and kinematic analysis of high flex knee implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farahany, Saeed and Erfani, Mostafa and Karamoozian, Amir and Ourdjini, Ali and Idris, Mohd. Hasbullah (2010) Artificial neural networks to predict of liquidus temperature in hypoeutectic Al-Si cast alloys. Journal of Applied Sciences, 10 (24). 3243 - 3249. ISSN 1812-5654

Farnsworth, J. and Murch, Graeme Elliott and Belova, Irina Veniaminovna and Ochsner, Andreas and Fiedler, Thomas (2010) A lattice Monte Carlo analysis on thermal diffusion in syntactic hollow-sphere structures. Materialwissenschaft Und Werkstofftechnik, 41 (5). 283 - 286. ISSN 0933-5137

Farsadi, Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes wav. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farsadi , Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes waviness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fiedler, Thomas and Belova, Irina V. and Ochsner, Andreas and Murch, Graeme E. (2010) Review on thermal lattice Monte Carlo analysis. In: Current Trends in Chemical Engineering. Studium Press LLC, USA, pp. 105-130. ISBN 193-369-975-2

Fiedler, Thomas and Belova, Irina Veniaminovna and Ochsner, Andreas and Murch, Graeme Elliott (2010) A lattice Monte Carlo analysis of thermal transport in phase change materials. Defect and Diffusion Forum, 297-30 . 154 - 161. ISSN 1012-0386

Fiedler, Thomas and Kim, Ho Sung and Belova, Irina Veniaminovna and Sloan, Scott William and Murch, Graeme Elliott and Ochsner, Andreas (2010) Elastic finite element analysis on cross-sections of random hollow sphere structures. Materialwissenschaft Und Werkstofftechnik, 41 (5). 250 - 256. ISSN 0933-5137

Fitra Lestari, Fitra Lestari (2010) Developing system information technology on planning demand and supply. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fouladinejad, Nariman (2010) Visual database design for driving simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fouladinejad , Nima (2010) Intelligent traffic flow simulation system on a small scale environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G

Gan, Teik Kun (2010) Decision making for capacity planning in a make-to-order company using mixed integer programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghosh, Pradip and Yusop, M. Zamri and Satoh, Syunsaku and Subramanian, Munisamy and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2010) Transparent and flexible field electron emitters based on the conical nanocarbon structures. Journal of the American Chemical Society, 132 (12). pp. 4034-4035. ISSN 0002-7863

Golrang, Mehdi (2010) Design for recycling methodology for rapid manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gromada, Magdalena and Mishuris, Gennady and Ochsner, Andreas (2010) On the evaluation of mechanical properties from the axisymmetric tensile test. Archives Of Metallurgy And Materials, 55 (1). 325 -330. ISSN 1733-3490

H

Halim , Shamsul Azwan (2010) Simulation of plastic injection moulding part using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haminudin, Nor Faizah (2010) Center pressure for bio-based lubricant in elastohydrodynamic lubrication of rectangular conjuction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haque, K. M. A. and Hussain, M. S. and Alam, S. S. and Islam, S. M. S. (2010) Synthesis of nano-nickel by a wet chemical reduction method in the presence of surfactant (SDS) and a polymer (PVP). African Journal of Pure and Applied Chemistry, 4 (5). pp. 58-63. ISSN 1996-0840

Haque, K. M. A. and Hussain, Mohammad Sakhawat (2010) Synthesis of nano-sized nickel particles by a bottom-up approach in the presence of an anionic surfactant and a non-ionic polymer. Journal of Scientific Research, 2 (2). pp. 313-321. ISSN 2070-0237 (Print) ; 2070-0245 (Electronic)

Harudin , Nolia (2010) Preventive maintenance improvement at epoxy cure operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemi Dehkordi , Sayed Mahdi (2010) Friction induced vibration and its prevention using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemi-Dehkordi, Sayed-Mahdi and Mailah, Musa and Abu Bakar, Abdul Rahim (2010) Suppressing friction-induced vibration due to negative damping and mode coupling effects using active force control. Australian Journal of Basic and Applied Sciences, 4 (8). 3917 - 3933. ISSN 1991-8178

Hashemiyan, Zahra (2010) Develop single frequency in bioelectric impedance analysis device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Mohd. Hanifah (2010) Development of energy harvesting device using piezoelectric material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim , Ahmad Safwan (2010) Roll reduction device for small fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heidari , Milad (2010) Development of elbow prosthesis for total elbow arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hermawan, Hendra and Dube, D. and Mantovani, D. (2010) Degradable metallic biomaterials for cardiovascular applications. In: Metals for Biomedical Devices. Woodhead Publishing Limited, Oxford, United Kingdom, pp. 379-404. ISBN 978-1-84569-434-0

Hosseini, S. M. H. and Ochsner, Andreas and Merkel, M. and Fiedler, T. (2010) Predicting the effective thermal conductivity of Perforated Hollow Sphere Structures (PHSS). In: Current Trends in Chemical Engineering. Studium Press LLC, India, pp. 131-151. ISBN 1933699752

Hosseini, Seyed Mohammad Hossein and Ochsner, Andreas and Fiedler, Thomas (2010) Numerical prediction of the effective thermal conductivity of open- and closed-cell foam structures. Defect and Diffusion Forum, 297301 . 1210 - 1217. ISSN 1012-0386

Hosseini , Nima Babazadeh (2010) Simulation of microchannel heat sink with hotspot(s). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husain , Mohamad Fazli (2010) Microbiology influenced corrosion of carbon steel and stainless steel by bacterium, pseudomonas aeruginosa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, Fadi Faris (2010) Effect of strontium modification and and AL-TI-B grain refiner on microstructure and properties of cast LM6 alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, M. S. and Haque, K. M. A. (2010) Synthesis of nano aggregated nickel particles by a chemical process. Materials Technology: Advanced Performance Materials, 25 (5). pp. 289-291. ISSN 1066-7857

Hussain, Mohammad Sakhawat (2010) Electroforming a process for macro/nano-manufacturing. Int J of Nanomanufacturing, 14 (1/2/3/). 324 - 333.

Hussain, Mohammad Sakhawat and Anamoul Haque, Kazi Mohammad and Ghihab, Abdul Rahman (2010) Nano-sized agglomerated Ni particles synthesized by a phase transformation method. International Journal of Nanoparticles, 4 (1). 33 - 44. ISSN 1753-2507

Hussin, M. H. and Abu Bakar, A. R. and Jamaluddin, M. R. and Szlapka, R. (2010) Effects of lining thickness on squeal in drum brake assembly: experimental investigations. Int. J. Vehicle Structures & Systems, 2 (2). 69 -73. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Hussin, Norasikin (2010) Occupational safety and health improvement at casting plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

Ibrahim, Alia (2010) Elastohydrodynamic lubrication for bio-based lubricants in rectangular conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Imran (2010) Design of a curry puff making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Norfaizem (2010) Effect of tool length on plain turning performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idrus, Noriqman Hakimi (2010) Design and development of the oil expeller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Islam, M. R. and Yaakob, Omar and Abdul Malik, Adi Maimun and M. Kamal, M. Y. (2010) Computer Simulation of Current Forces on Motion of Floating Production Storage and Offloading in Irregular Waves. Scientia Iranica (International Journal of Science and Technology), 17 (1). pp. 53-60.

Islam, Moni Rafiqul and Yaakob, Omar and Maimun, A. and Kamal, M. Y. B. M. (2010) Computational simulation of current forces on floating production storage and offloading in irregular waves. Scientia Iranica Transaction B-Mechanical Engineering, 17 (1B). 53 - 60. ISSN 1026-3098

Ismail, A. R. and Haniff, M. H. M. and Deros, B. M. and Abd. Rani, Mat Rebi and Makhbul, Z. K. M. and Makhtar, N. K. (2010) The optimization of environmental factors at manual assembly worstation by using taguchi method. Journal of Applied Sciences, 10 (13). 1293 - 1299. ISSN 1812-5654

Ismail, A. R. and Yusof, M. Y. M. and Sopian, K. and Mat Rebi, Abd. Rani and Makhbul, Z. K. M. and Makhtar, N. K. (2010) Optimizing humidity level and illuminance to enhance worker performance in an automotive industry. Journal of Applied Sciences, 10 (14). 1389 -1396. ISSN 1812-5654

Ismail, Mohd. Rozaimi (2010) Effect of cutting parameters on the surface integrity of ground AISI 1148 steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

J

Jafari, Sajjad (2010) Hydroxyapatite coating on metallic biomaterials prepared by sol-gel method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jafartayari, Saman (2010) Awareness of sustainable manufacturing practices in Malaysian manufacturers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahanabadi, Hossein (2010) Intelligent active force control of a human-like arm actuated by pneumatic artificial muscles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahangiri , Amirreza (2010) Investigation on A1-Mg2Si MMC TIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahwie , Nurasyikin (2010) Study on car body kit design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaluddin, Hishamuddin and Em, Poh Ping and Hudha, Hudha (2010) Hardware-in-the-loop simulation of automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Vehicle Safety, 5 (1). 35 - 59. ISSN 1479-3105

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Rahman, M. N. A. and Murtadhahadi, Murtadhahadi and Ahmad, S. and Ibrahim, M. H. I. and Nor, N. H. M. (2010) Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction. Advanced Materials Research, 83-86 . pp. 945-952. ISSN 1022-6680

K

Kamaruddin, Aisyah Nabilah (2010) Mixed integer programming (mip) model for production scheduling in an automotive part company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kang, Boon Siang (2010) Quality improvement through implementation of poka yoke and six sigma methodology in thermal interface material coating industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kazi, Suhail and As'arry, Azizan and Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed (2010) Experimental implementation of smart glove incorporating piezoelectric actuator for hand tremor Control. WSEAS Transactions on Systems and Control, 5 (6). 443 - 453. ISSN 1991-8763

Khalid, M. Saqr and Hossam, S. Aly and Hassan, I. Kassem and Mohsin, M. Sies and Mazlan, A. Wahid (2010) Computations of shear driven vortex flow in a cylindrical cavity using a modified k-ε turbulence model. international Communications in Heat and Mass Transfer, 37 (8). 1072 - 1077.

Khoei, Mohammadreza (2010) Supply chain management information system (SCMIS) a case study in vamco (Axle Manufacturing Factory). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

King Jye, Wong and B. F., Yousif and K. O., Low (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 224 (3). pp. 139-148. ISSN 1464-4207

Koleini, Shahriar (2010) The properties of hot rolled binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Krishnan, Subramaniam and Ahn, Sang-Hee and Lee, Choong-Won (2010) Design and development of a hydrogen-peroxide rocket-engine facility. Jurnal Mekanikal : An International Journal (30). pp. 24-36. ISSN 0127-3396

Kuan, Yew Wong and Komarudin, Komarudin (2010) Applying Ant system for solving unequal area facility layout problems. European Journal of Operational Research, 202 (3). 730 - 746. ISSN 0377-2217

Kuan, Yew Wong and Phen, Chiak See (2010) A hybrid ant colony optimization algorithm for solving facility layout problems formulated as quadratic assignment problems. Engineering Computations, 27 (1). 117 - 128. ISSN 0264-4401

L

Lai, Cing Xin (2010) Transient solution to fluid flow in cavity with stretched coordinae system using constrained interpolated profile navier stokes equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lani, Norziana (2010) High speed nickel plating on difficult to plate metal(Aluminium). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Li, Hong Juang (2010) Finite element modelling for a piezoelectric ultrasonic system. Measurement: Journal of the International Measurement Confederation, 43 (10). pp. 1387-1397. ISSN 0263-2241

Li, Hong Juang (2010) X-ray chest image reconstruction by Radon transform simulation with fan-beam geometry. Measurement: Journal of the International Measurement Confederation, 43 (3). 447 - 453. ISSN 0263-2241

Li, Hong Juang and Ming, Ni Wu (2010) MRI brain lesion image detection based on color-converted K-means clustering segmentation. Measurement, 43 (7). 941 - 949. ISSN 0263-2241

Li, Hong Juang and Wu, Ming Ni (2010) Image noise reduction using Wiener filtering with pseudo-inverse. Measurement: Journal of the International Measurement Confederation, 43 (10). pp. 1649-1655. ISSN 0263-2241

Lim, Meng Hee (2010) Application of wavelet transform analysis for the diagnosis of blade faults in rotating machinery. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loghmanian, Sayed Mohammad Reza (2010) Structure optimization of dynamic system model using multi - objective genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loh, Chee Kin (2010) Simulation of natural convection heat transfer in an enclosed cavity using Constrained Interpolated Profile Navier-Stokes Equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Low, Kean O. and Lim, J. L. and Wong, King Jye (2010) An experimental study on the scratch characteristics of bamboo fibre-reinforced epoxy composite. Advanced Composites Letters, 19 (4). 140 - 145. ISSN 0963-6935

Low , Kok Wai (2010) Reliability of passive hull systems on floating production system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lv, Ya (2010) Development of simulation software for simulating the interactive control of manipulators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. S., Muhamad Zameri and A., Feri and Z., Norhayati and B. Jane, Gordon (2010) Strategic guidance model for product development in relationship with recycling aspects for automative products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063

M. S., Muhamad Zameri and M. S., Awaluddin (2010) Software for end-of-life disassembly analysis. Journal of Sustainable Design, 1 (3). 257 - 277. ISSN 1743-8284

M. Yusup, Eliza (2010) Evaluation of an active force control for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M. Zakuan, Norhayati and Mohd. Yusof, Sha'ri and Laosirihongthong, Tritos and Mohamed Shaharoun, Awaluddin (2010) Proposed relationship of TQM and organisational performance using structured equation modelling. Total Quality Management & Business Excellence, 21 (2). pp. 185-203. ISSN 1478-3363

M. Zin, Mohd. Rody and Che Sidik, Nor Azwadi (2010) An accurate numerical method to predict fluid flow in a shear driven cavity. International Review of Mechanical Engineering (IREME), 4 (6). 719 - 725. ISSN 1970-8734

Mad Saad, Shaharil and Razaly, F. and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and Yaacob, Mohd. Shafik and Musa, Akihiro R. and Abdullah, Mohd. Yunus (2010) Development of piezoelectric braille cell control system using microcontroller unit (MCU). Wseas Transactions on Circuits and Systems, 9 (6). 379 - 388. ISSN 1109-2734

Madhloom Al-Khafaji, Ali Abdulhussain (2010) System identification of flexible plate structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahmod, Hamzah (2010) Design of a low cost concrete rooftile making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa and A., Noshadi and A., Zolfagharian (2010) Active force control of 3-RRR planar parallel manipulator. In: ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings, 2010, Singapore.

Mailah, Musa and Abu Bakar, Abdul Rahim and Hashemi-Dehkordi, S. M. (2010) Intelligent active force control with piezoelectric actuators to reduce friction induced vibration due to negative damping. International Review of Electrical Engineering, 4 (6). 1294 - 1305. ISSN 1827-6660

Maimun, Adi and Setyawan, Donny and Islam, M. Rafiqul and Priyanto, Agoes and Jaswar, Jaswar (2010) Safety of a high speed passenger ferry in damaged condition. Journal of Applied Sciences, 11 . pp. 219-235. ISSN 1812-5654

Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (3). pp. 336-355. ISSN 1450-216X

Mat Darus, Intan Zaurah and Lokaman, Zainul Aman (2010) Dynamic modelling of twin rotor multi system in horizontal motion. Jurnal Mekanikal (31). pp. 17-29. ISSN 0127-3396

Mat Darus, Intan Zaurah and Mailah, Musa and Tavakolpour, Ali Reza (2010) Genetic algorithm-based identification of transfer function parameters for a rectangular flexible plate system. Engineering Application of Artificial Intelligence, 23 (8). 1388 - 1397. ISSN 0952-1976

Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Natural Frequency Analysis Of All Edges Clamped Flexible Thin Plate. International Review of Mechanical Engineering (IREME), 4 (4). 433 - 440. ISSN 1970 - 8734

Mat Dzahir, Mohd. Azwarie (2010) Remote control of hand arm robotic system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Dzahir , Mohd. Azuwan (2010) Development of assistive robotic arm for stroke rehabilitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Jusoh, Mazlan (2010) Surface integrity evaluation on titanium alloy after EDM machining using different graphite electrodes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Nuri @ Md. Din , Nur Rashid (2010) Numerical simulation of aerodynamics effect on an automotive side mirror. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Sahat, Idris (2010) A numerical analysis of two dimensional lid driven cavity flow using cubic interpolated pseudo-particle method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, Muhamad Zameri and Afrinaldi, Feri and Zakuan, Norhayati and Blount, Gordon and Goodyer, Jane and Jones , Ray and Jawaid, Ashraf (2010) Strategic guidance model for product development in relation with recycling aspects for automotive products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063 (Print);1913-9071 (Electronic)

Mat Yajid, Muhamad Azizi and Bagshaw, H. and Mobus, G. (2010) In situ and ex situ transmission electron microscopy investigation of Cu-Al-Cu-Ti reactive metallic multilayer coatings. Journal Of Materials Research, 25 (6). 1196 - 1203. ISSN 0022-2461

Mataram, Agung and Ismail, Ahmad Fauzi and Abang Mahmod, Dayang Salyani and Matsuura, Takeshi (2010) Characterization and mechanical properties of polyacrylonitrile/silica composite fibers prepared via dry-jet wet spinning process. Materials Letters, 64 (17). 1875 - 1878. ISSN 0167-577X

Md. Daud, Mohd. Yusof and Lucas, Margaret and Jamaludin, Khairur Rijal and Anis, Samsol Faizal (2010) Analysis of surface deformation under static and ultrasonic compression of aluminium. In: Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010, Pulau Pinang, Malaysia.

Md. Lazin @ Md. Lazim , Md. Norazlan (2010) Natural ventilation tropical greenhouse (nvtg) modeling and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, Mohd. Zarhamdy and As’arry, Azizan and Kazi, Suhail and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus (2010) Development of experimental-rig for human postural tremor behaviour. International Journal of Human Factors Modelling and Simulation, 1 (3). pp. 339-351. ISSN 1742-5549

Mesuan, Mohd. Ariffin (2010) Simulation of metal stamping for panel front door inner part for new automotive model development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Milani , Kaveh (2010) Operational competitivness index for Malaysian container ports. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirshahi, Mohammad (2010) The properties of hot extruded binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Ahmad Dzia’Uddin (2010) Effect of process parameters on surface roughness produced by turning boring operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Mohd. Nazri (2010) Simulation and experimental study of vibration control using smart material for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Nazari, Munira (2010) Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Sultan, Mohamed Ali (2010) Techno-economic analysis of compressed natural gas carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Adib, Mohd. Azrul Hisham (2010) Analysis of blood flow into the main artery via mitral valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Azmi, Mohd. Irwan (2010) Numerical study of convective heat transfer and fluid flow through porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Badri , Mohd. Najib (2010) Simulation of plastic injection moulding of family mould using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Isa @ Hamid, Mohd. Halimudin (2010) Performance evaluation of electrical discharge machine on titanium alloy using copper impregnated graphite electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohammad Shaiful Ashrul and Saharin, Sanisah (2010) Removal of NOx and CO from a burner system. Environmental Science & Technology, 44 (8). 3111 -3115. ISSN 0013-936X

Mohd. Jamir, Mohd. Ridzuan (2010) Experimental investigation of minimum quantity lubricant (MQL) in cold forward extrusion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Rohani, Jafri and Mohd. Yusof, Sha’ri and Mohamad, Ismail (2010) The development of a survey instrument for measuring a relationship between statistical process control success factors and performance. Jurnal Mekanikal : An International Journal (30). pp. 1-16. ISSN 0127-3396

Mohd. Salleh, Zuan Azhary (2010) Heat stress on 500-660 mm pipe workers in oil rig jackets assembly welding works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Salleh, Zuliazura (2010) Analysis on the flow and pressure distribution for actual stenosis in trachea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Samin, Pakharuddin (2010) Hybrid stability augmentation system-force control of semi-active suspension with magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohd. Samsuri, Saiful Farhan (2010) Modeling of environmental climates inside naturally ventilated tropical greenhouse. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Senusi, Shahrullizam (2010) Solar absorption thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yahya, Nur Hayati (2010) The effect of visual viewing geometry on computer monitor user. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunus, Mohd. Yusri (2010) Software development of concurrent design for manufacturing process selection of plastic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusof, Noordin and Sharif, Safian and D., Kurniawan (2010) Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Materials And Manufacturing Processes, 25 (6). 370 - 377. ISSN 1042-6914

Mohd. Yusoff, Sabariah (2010) Ergonomic assessment in an assembly plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusop, Mohd. Zamri and Ghosh, Pradip Kumar and Wang, Zhipeng and Kawagishi, M. and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2010) Direct growth of carbon nanofibers on metal mesh substrates by ion irradiation method. Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics, 28 (2). C2C9 - C2C12. ISSN 2166-2746

Mokhtar, Kamran (2010) Application of clad/unclad optical fiber in the corrosion studies of reinforced concrete rebars. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mozafari, Hamid and Abdi, Behzad and Ayob, Amran (2010) Optimization of composite plates based on imperialist competitive algorithm. International Journal on Computer Science and Engineering, 2 (9). pp. 2816-2819. ISSN 2229-5631 (Print); 0975-3397 (Online)

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Influence of thickness variation on the buckling load in plates made of functionally graded materials. European Journal of Scientific Research, 47 (3). pp. 422-435. ISSN 1450-216X

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Verification of the thermal buckling load in plates made of functional graded materials. International Journal of Engineering (IJE), 4 (5). pp. 338-356. ISSN 1985-2312 (Electronic)

Mozafari, Hamid and Hassanipour, Meysam and Ayob, Amran (2010) Investigation of thickness and thermal treatments on the deep drawing process for the aluminum plate. International Journal of Engineering Science and Technology, 2 (10). pp. 5915-5920. ISSN 0975-5462

N

Nechaev, Yu S. and Ochsner, Andreas (2010) On physical nanoscale aspects of compatibility of steels with hydrogen and natural gas. Journal Of Nanoscience and Nanotechnology, 10 (2). 1398 -1413. ISSN 1533-4880

Niakan , Ali Asghar (2010) Lost foam casting of LM6-A1-Si cast alloy under pressure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Mu’Tasim, Muhammad Ammar (2010) Simulations of solid particle in a lid-driven cavity flow using Lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noh, Shahril (2010) Quality characteristics of thin-walled plastic injection parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

O

Ochsner, Andreas (2010) Plasticity of three-dimensional foams. In: Cellular and Porous Materials in Structures and Processes. CISM International Centre for Mechanical Sciences, 521 . Springer Vienna, New York, pp. 107-166. ISBN 978-3-7091-0296-1

Ochsner, Andreas and Da Silva, Lucas Filipe Martins (2010) Experimental engineering and applications. Experimental Mechanics, 50 (5). 561 - 561. ISSN 0014-4851

Ochsner, Andreas and Hosseini, Seyed Mohammad Hossein (2010) Constitutive modeling of the mechanical behavior of trabecular bone - continuum mechanical approaches. In: Biomechanics of Hard Tissues: Modelling, Testing, and Materials. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp. 159-191. ISBN 978-352-732-431-6

Ochsner, Andreas and Hosseini, Seyed Mohammad Hossein and Merkel, Markus (2010) Numerical simulation of the mechanical properties of sintered and bonded Perforated Hollow Sphere Structures (PHSS). Journal Of Materials Science & Technology, 26 (8). 730 -736. ISSN 1005-0302

P

Poh, Ping Em and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2010) Automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Advanced Mechatronic Systems, 2 (5/6). pp. 350-368. ISSN 1756-8412 (Print); 1756-8420 (Electronic)

Prawoto, Yunan and Jern, Phye Tan and Choon, Yong Loh (2010) Effect of microstructures and material compositions on blister formation. Materials Sciences and Applications, 1 (3). pp. 158-161. ISSN 2153-117X (Print); 2153-1188 (Electronic)

R

Rafati , Mahdi Zhaleh (2010) Numerical simulation of fluid flow and heat transfer in a trapezoidal microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rajoo, S. and Martinez-Botas, R. F. (2010) Unsteady effect in a nozzled turbocharger turbine. Journal of Turbomachinery, 132 (3). 001-009. ISSN 0889-504X

Ramli, Mohd. Ridhwan (2010) Design of new interlocking bricks making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Nabilah and Jamaluddin, Hishamuddin and Mansor, Shuhaimi and Faris, Waleed Fekry (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). 59 - 71. ISSN 17456436

Ramli, Rosliza and Wan Nik, Wan Mohd. Norsani and Sudin, Izman and Prawoto, Yunan (2010) Anti-corrosive properties of natural honey on Al-Mg-Si alloy in seawater. Current Applied Physics, 10 (3). 923 - 929. ISSN 1567-1739

Ramli, Yahaya (2010) Introduction to compressed air systems. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0728–0

Rasul, Mohamad Sattar and Ismail, Mohd. Yusof and Ismail, Napsiah and Rajuddin, Muhammad Rashid and Abd. Rauf, Rose Amnah (2010) Development of employability skills assessment tool for manufacturing industry. Jurnal Mekanikal : An International Journal (30). pp. 48-61. ISSN 0127-3396

Razali, Nadlene (2010) Determination of the flow curve of necking tensile specimen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razaly, F. and Ajizan, N. H. and Saad, S. M. and Yaacob, Mohd. Shafiek and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and Abdullah, M. Y. and Musa, A. R. (2010) User friendly system for the visually impaired in learning Al-Quran. WSEAS Transactions on Systems, 9 (6). 659 -668. ISSN 1109-2777

Rosdzimin, A. R. M. and Zuhairi, S. M. and Che Sidik, Nor Azwadi (2010) Simulation of mixed convection heat transfer using lattice boltzmann method. International Journal of Automotive & Mechanical Engineering, 2 . pp. 130-143. ISSN 1985-9325 (Print); 2180-1606 (Online)

Rozali, Afzan (2010) Product design improvement through design for manufacture and assembly (DFMA) and theory of inventive problem solving (TRIZ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

S., Mansor and M., Passmore (2010) Measurement of a bluff body aerodynamic yaw moment magnification and damping using a dynamic wind tunnel facility. ACME Journal of Applied Mechanics, 78 (3). 001-006. ISSN 0021-8936

S. Aly, Hossam and Eldrainy, Yehia A. and M. Saqr, Khalid and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Nazri (2010) A mathematical model for predicting spray atomization characteristics in an Eulerian-Eulerian framework. International Communications in Heat and Mass Transfer, 37 (6). 618 - 623.

S. Alyami, Saad Rabia (2010) The effect of coconut dust addtion on the properties of green sand and investment casting moulds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saad Elmunafi, Mohamed Handawi (2010) Performance evaluation of wiper coated ceramic tool when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Saaran, Idris (2010) Effect of different pretreatment parameters on silicon nitride substrate surface roughness prior to diamond deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadir, Sahba (2010) Investigation of fluid flow through cellular structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safari, Habiballah (2010) Effect of two-step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said Ali @ Syed Ali, Sharifah Aznee (2010) Analysis of slips and falls among workers at workplace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saleh, Alireza Tavakolpour (2010) Mechatronic design of intelligent active vibration control systems for flexible structures. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Salema, Arshad Adam and Ani, Farid Nasir (2010) Microwave induced pyrolysis of oil palm biomass. Bioresource Technology, 102 (3). pp. 3388-3395. ISSN 0960-8524

Salim, Mohd. Azli and Noordin, Aminurrashid and Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abd. Rahim (2010) Dynamic analysis on noise and vibration study of flexible wiper blade system. Advanced Materials Research, 97101 . 4530 - 4536. ISSN 1022-6680

Salimnezhadghareziaeddini, Aida (2010) Information system in out-patient clinic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salimon , Norhidayah (2010) Optimum strategy for the implementation of a decentralized distribution network for industrialised building system (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samion, Syahrullail and Che Sidik, Nor Azwadi and Osman, Shahrul Azmir (2010) Lattice Boltzmann simulation of plume behavior from an eccentric annulus cylinder. International Journal of Mechanical and Materials Engineering, 5 (2). 129 - 135. ISSN 1823-0334

Samion, Syahrullail and Kamitani, S. and Nakanishi, K. (2010) Experimental evaluation of RBD palm olein as lubricant in cold metal forming. Jurnal Mekanikal (31). pp. 1-10. ISSN 0127-3396

Saqr, K. M. and Che Sidik, Nor Azwadi and Abdul Wahid, Mazlan (2010) Theoretical notes on the mathematical modelling of gaseous detonations using boltzmann equation. Journal of Applied Sciences, 10 (14). 1476 -1480. ISSN 1812-5654

Saqr, Khalid M. and Aly, Hossam S. and Sies, Mohsin M. and Abdul Wahid, Mazlan (2010) Effect of free stream turbulence on NOx and soot formation in turbulent diffusion CH4-air flames. International Communications in Heat and Mass Transfer, 37 (6). 611 - 617. ISSN 0735-1933

Sari , Mehdi Mohammadzadeh (2010) Machinablity of aisih 13 tool steel when using the edm process with carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaari, Mohd. Rosmani (2010) Effect of edge preparation when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahani , Pouria (2010) Implementation of composite bar and beam element into a commercial finite element code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahri, Norsyarizan (2010) Development of a material handling system for catheter manufacturing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsuri, Siti Rahmah (2010) The effect of soil resistivity on corrosion behaviour of coated and uncoated low carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shayganpour, Amirreza (2010) Evaluation of significant factors in aluminum lost foam casting using doe approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirazi, Arash Nasrollahi (2010) Finite element simulation of three surgical treatments of distal radius intra-articular fracture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sidik, N. A. C. and Horng, N. C. and Mussa, M. and Abdullah, S. (2010) Simulation of rarefied gas flow in slip and transitional regimes by the lattice Boltzmann method. CFD Letters, 2 (2). pp. 66-74. ISSN 2180-1363

Sivalinggam, Thibagaran (2010) Yield improvement in glass manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soleimani, Mohammad (2010) Numerical and experimental investigation of synthetic biogas pulse combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Speich, Marco and Merkel, Markus and Ochsner, Andreas (2010) Large deformation of core materials for sandwich panels. Materialwissenschaft Und Werkstofftechnik, 41 (5). 270 - 275. ISSN 1521-4052

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohammad Nazim and Low, Yik Kuan and Eng, Kean Khor (2010) Effect of pickling process on adhesion strength of ti oxide layer on titanium alloy substrate. Advanced Materials Research, 146-47 . pp. 1621-1630. ISSN 1662-8985

Suid, Asmar (2010) Investigation of the microscopic deformation behavior and surface quality of austenitic stainless steel plate during holes piercing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, O. and Abd Kader, Ab Saman and Saharuddin, A. H. and Wan Nik, W. B. and Samo, K. B. (2010) Safety and environmental risk and reliability modeling process for sustainable inland water transportation. Journal of Marine Environmental Engineering , 9 (2). pp. 145-173. ISSN 1061-026X

Sulaiman , Mohd. Hafis (2010) Numerical simulation of cold forward extrusion for aluminum A 1100. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman , Syazana (2010) Process improvement at an engine assembly production line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulong@Zakaria, Zaeime (2010) Development of computer-aided materials and manufacturing process selection software using Boothroyd-Dewhurst methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suprayogi, Dedy Triawan (2010) Savonius rotor vertical axis marine current turbine for renewable energy application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

T

Taghavisangdehi, Seyedhamed (2010) Effect of adding carbon nano tube into dielectric when edming titanium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Boon Ann (2010) The characteristics of impinging flame and its effects on the heat transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Joon Shyan (2010) Effects of interaction between strontium,antimony and titanium-boron on microstructure and properties of alumium alloy ai-11%(LM6). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, P. L. and Sharif, Safian and Sudin, Izman (2010) Roughness models for sanded wood surfaces. Wood Science and Technology, 46 (1-3). 1 -14. ISSN 0043-7719

Tavakolpour, Ali Reza and Musa, Mailah and Mat Darus, Intan Zaurah and Tokhi, Osman (2010) Self-learning active vibration control of a flexible plate structure with piezoelectric actuator. Simulation Modelling Practice and Theory, 18 (5). 516 - 532. ISSN 1569-190X

Teh , Irene Hui Lynn (2010) Combustion and emission investigations of a diesel engine operating on palm oil derived fuels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Thien, Yung Fatt (2010) Control of piezoelectric actuator on human-like hand model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tyurebekov, Yermek (2010) Experimental study of the flow forces in the hydraulic poppet valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

U

Udoncy Olugu, Ezutah and Kuan, Yew Wong and Mohamed Shaharoun, Awaludin (2010) A comprehensive approach in assessing the performance of an automobile closed-loop supply chain. Sustainability, 2 (4). pp. 871-889. ISSN 2071-1050

V

Veyhl, Christoph and Belova, Irina Veniaminovna and Murch, Graeme Elliott and Ochsner, Andreas and Fiedler, Thomas (2010) On the mesh dependence of non-linear mechanical finite element analysis. Finite Elements in Analysis and Design, 46 (5). 371 -378. ISSN 0168-874X

W

Wai, Peng Wong and Kuan, Yew Wong (2010) Intermediate measures consideration for a value chain or multistage system: an efficiency analysis using DEA approach. In: Advances in Measurement Systems. InTech, Rijeka, Croatia, 561-574 . ISBN 978-953-307-061-2

Wan Abu Seman, Sharifah Zainaf (2010) Integration of design for manufacturing and assembly (DfMA) and theory of inventive problem solving (TRIZ) for design improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Mahmud, Wan Musa (2010) An approach of rib resign for injection moulded characteristics of a hand phone casing part by using simulation of moldflow and design of experiments (doe). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Mohamad , Wan Zulfadli (2010) Recognition of cylindrical features from 2.5D and 3D prismatic model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, King Jye and Nirmal, Umar and Lim, Boon Kian (2010) Impact behavior of short and continuous fiber-reinforced polyester composites. Journal of Reinforced Plastics and Composites, 29 (23). pp. 3463-3474. ISSN 0731-6844

Wong, King Jye and Zahi, S. and Low, K. O. and Lim, C. C. (2010) Fracture characterisation of short bamboo fibre reinforced polyester composites. Materials and Design, 31 (9). 4147 - 4154. ISSN 0261-3069

Wong, Kuan Yew and Komarudin, Komarudin (2010) Solving facility layout problems using flexible bay structure representation and Ant System algorithm. Expert Systems with Applications, 37 (7). 5523 - 5527. ISSN 0957-4174

Wong, Yu Cheng (2010) A lean manufacturing implementation framework for the Malaysian electrical and electronics industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong , Ling Shuang (2010) Improvement techniques for reducing human error. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong , Yi Kang (2010) Field and laboratory vibration analysis for structural degradation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Y

Yaakob, Omar and Tawi, Kamarul Baharin and Sunanto, D. T. S. (2010) Computer simulation studies on the effect overlap ratio for savonius type vertical axis marine current turbine. International Journal of Engineering, Transactions A: Basics, 23 (1). 79 - 88. ISSN 1728-1431

Yaakob, Omar and Zainudin, Norazimar and Samian, Yahya and Abdul Malik, Adi Maimun and Palaraman, Robiahtul Adawiah (2010) Presentation and validation of remote sensing ocean wave data. International Journal of Research and Reviews in Applied Sciences (IJRRAS), 4 (4). pp. 373-379. ISSN 2076-734X

Yap, Gabriel Wei Phing (2010) Recognition of isolated prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yeong, Weng Harn (2010) Layout optimization and manning ratio improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yousif, B. F. and Nirmal, U. and Wong, King Jye (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). 4514 -4521. ISSN 0264-1275

Yu, Zheng (2010) Recognition of interacting prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusoff, Salahuddin (2010) Performance evaluation of carbide tool in end milling of medium density fiberboard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusoff , Mohd. Huzaifah (2010) Personal traits and emotions in behavioral patterns for young motorcyclist riders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Z

Zakaria, Nazri Huzaimi (2010) Elastohydrodynamics lubrication for bio-based lubricants in elliptical conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakuan, Norhayati and Mohd. Yusof, Shari and Mat Saman, Muhamad Zameri and Mohd. Shaharoun, Awaludin (2010) Confirmatory factor analysis of TQM practices in Malaysia and Thailand automotive industries. International Journal of Business and Managemen, 5 (1). pp. 160-175. ISSN 1833-3850 (Print); 1833-8119 (Electronic)

This list was generated on Fri Mar 29 04:33:05 2024 +08.