Browse by Type

Yeo, Owen Thian Seng (2015) Effects of green spaces on urban microclimate in residential areas in hot and humid climates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

A. Rahman, Azura Hanis (2015) Polyvinyl alcohol-alginate ferro photo gels for mercury (II) removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

Md. Jedi, Muhamad Alias (2015) An efficient clustering algorithm in the presence on outlier and doubtful data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Perkasa, Muhammad Iqbal (2015) The potential of design and build procurement method implemention in the directorate of enviromental sanitation development Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kasim, Nabilah (2015) Ytterbium doped and co-doped Q-switched fiber lasers utilizing passive saturable absorbers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mahmud, Jafaru Oshiobugie (2015) Development of product design specifications for paraplegic wheelchair. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ogiri, Hassan Ibrahim (2015) Self consolidating high performance palm oil fuel ash and pulverised burnt clay blended concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Parimin, Noraziana (2015) Effect of solution treatment on high temperature oxidation of Fe-33Ni-19Cr and Fe-40Ni-24Cr alloys. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruzaman, Natrah (2015) Thermal hydraulic performance of microchannel heat sink device. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Saiful Najmee (2015) Dynamics of mather type plasma focus with step anode configuration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rizvi, Syed Zuhaib Haider (2015) Simultaneous double pulse enhanced laser induced breakdown spectroscopic detection of trace heavy metals in herbs. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Andromeda, Trias (2015) Integrated control mechanism of electrical discharge machining system for higher material removal rate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Majidnia, Zohreh (2015) Combined maghemite - titania nanoparticles embedded in polyvinyl alcohol-alginate beads for heavy metals and radioactive ions removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohammad Yusoff, Nurulhuda (2015) Physical and spectroscopic characterisation of samarium doped magnesium tellurite glass embedded silver nanoparticles. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Bakar, Mohamad Hafizi (2015) Cellular functional roles of celastrol on mitochondrial dysfunction-induced insulin resistance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Al-Tamimi, Mohammed Sabbih Hamoud (2015) Slantlet transform-based segmentation and α -shape theory-based 3D visualization and volume calculation methods for MRI brain tumour. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Razman, Nur Izzatie Hannah (2015) Physicochemical and electrochemical properties of pristine and modified ordered mesoporous carbon synthesized using SBA-15 as template. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sarafi, Sahar (2015) High speed – energy efficient successive approximation analog to digital converter using tri-level switching. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tijjani, Auwal Shehu (2015) Finite element analysis of single cell stiffness measurement using PZT-integrated buckling nanoneedle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Muttaka Na'iya (2015) Modelling of percent time spent following using spatial measurement approach for two-lane highways. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abbasabadi, Reza Hassanzadeh (2015) A modified savonius turbine with moveable blades for higher efficiency. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chew, Yen Wen (2015) 8192 bit Rivest-Shamir-Adleman data encryption hardware accelerator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Koo, Shi Qi (2015) Absorption energy of layered structures due to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Amin, Nor Amaiza (2015) Accelerated aqueous extraction and phytochemicals screening of eurycoma longifolia (Tongkat Ali) extract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aujih, Ahmad Bukhari (2015) Accuracy and quickness criterion-based driving skill metric for human adaptive mechatronics system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Kasim, Syamsul Anuar (2015) Accuracy assessment of height coordinate using unmanned aerial vehicle images based on orthometric height. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mahamad, Mohammed Nabil (2015) Activated carbon from pineapple waste biomass for the removal of methylene blue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shaharuddin, Nik Mohd. Ridzuan (2015) Active vibration control of transverse vibrating segmented marine riser. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nunoo, Solomon (2015) Adaptive channel estimation for sparse ultra wideband systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Loo, Ling Kim (2015) Adaptive online fault detection on network-on-chip based on packet logging mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Aras, Mohd. Shahrieel (2015) Adaptive simplified fuzzy logic controller for depth control of underwater remotely operated vehicle. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zulfatman, Zulfatman (2015) Adaptive sliding mode control with disturbance observer for a class of electro-hydraulic actuator system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullahi, Tijjani (2015) Adhesion of polymer coated steel wire by compression molding and extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Muhammad Azam (2015) Adopting keyword-driven testing framework in web-based product development. Masters thesis, Universiti Teknologi Malaysia.

Baghirov, Fakhri (2015) The adoption and performance of official facebook fan page (FFP) among global airline companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yadegaridehkordi, Elaheh (2015) An adoption model for cloud-based collaborative learning applications from top Malaysian universities' experience. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yadegaridehkordi, Elaheh (2015) An adoption model for cloud-based collaborative learning applications from top Malaysian universities’ experience. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sulaiman, Nur Nadira (2015) Adsorption and photocatalytic removal of dimethylarsenic acid using titania and zinc oxide thiol functionalized ZSM-5 zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Beden, Mazin Abdulhussein (2015) Adsorption and stripping of ethanol from aqueous solution using sepabeads207 adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Baba, Umar Muktar (2015) Adsorption of carbon dioxide and methane on alkali metal exchanged silicoaluminophosphate zeolite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Lye, Jimmy Wei Ping (2015) Adsorptive coagulation-flocculation removal of antibiotics in sewage treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mamat, Nor Aswani (2015) Affine-based time-scale ultra wideband wireless channel simulator for time-varying communication environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Salleh, Mohd. Shahril (2015) All optical packet routing time wavelength division multiplexing passive optical network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaharin, Mohd. Shafiq (2015) Alloying of aluminium surface with Q-switched Nd:YAG laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Wan Mamat, Wan Syahira (2015) Amalan dalam membuat keputusan pelaburan harta tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Ahmad, Jamilah (2015) Amalan kepimpinan transformasi pengetua sekolah berprestasi tinggi di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Limpo, Lita (2015) Amalan nilai pancasila dan gaya membuat keputusan dalam birokrat di Sulawesi Selatan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Chia, Lai Lai (2015) Amalan pengajaran efektif dalam kalangan guru sekolah menengah di negeri Johor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Zaharudin, Nur Zafirah (2015) Amalan perkhidmatan perunding pengurusan fasiliti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Dogara, Abdulrahman Mahmoud (2015) Amplification of partial rice florigen from Malaysian upland rice cultivar hitam and wai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ibrahim, Syahira (2015) Amylose content calibration model for the three types of selected rice grains using visible shortwave near infrared spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Doria (2015) Analysing higher education policy design towards developing a framework of international student experience in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Perdana School of Science Technology & Innovation Policy.

Rai, Nor Akmal (2015) Analysis and modelling of ultracapacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Baharum, Nurun Nabilah (2015) Analysis of Acalypha Indica extracts for antioxidant and antibacterial activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Rozbeh, Rokhsareh (2015) Analysis of aquatic worms in flocculated digested sludge and extraction of extracellular polymeric substances in wastewater treatment plants. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Elsherbeiny, Mohamed Mohamed Takeyeldein (2015) Analysis of low wind speed small hawt using blade element momentum theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Haron, Surhan Jamil (2015) Analysis of marine incidents in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shanshool, Basil Jabir (2015) Antenna array (design at 28 GHz for 5G mobile network). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Noor, Norazlin (2015) Anti-fungal activity of persicaria minor extracts toward malassezia and aspergillus niger. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Ismail, Nurul Izzati (2015) Anti-microbial and anti-inflammatory activities of crude and acidified fraction of selected Malaysian honey samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abubakar, Musa Ahmed (2015) Antibacterial activity of persicaria minor (Huds.) leaf-extracts against bacterial pathogens. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Arumugam, Gayathiri (2015) Antioxidative and antiproliferative activity of polygonum minus leaves extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hamzah, Naemah (2015) Aplikasi amalan fiqh sains rumah tangga dan kerjaya dalam kalangan akademis wanita cemerlang. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilisation.

Hamdan, Siti Norhazirah (2015) Aplikasi E-Biz JUPEM geoportal dalam pembelian produk kadaster daripada perspektif pengguna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sahib, Thaeer Mueen (2015) Application of advanced microprocessor in modern agriculture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamidi, Najaatul Farihah (2015) Application of demand side management strategies to reduce energy consumption in university buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nik Abdullah, Nik Abdul Hafiz (2015) Application of good faith as necessary limits in exercising the termination for convenience clause. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Teh, Bor Tsong (2015) The application of industrial symbiosis transforming Pasir Gudang towards green industrial park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rasid, Zawani Amirah (2015) Application of scheduling techniques on a split air conditioner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Sin Yi (2015) Application of similarity solution on gaseous pollutant problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Szue Yann (2015) The application of terrestrial laser scanning and web-based geographical information system for indoor asset management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Chua @ Chua Ching Kok, Mukhlis (2015) Application of ultrasonic guided wave for structural health monitoring of pipeline. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Azlan, Atiqah (2015) Applying model based testing approach in electric vehicle charging system : MyEV charging system case study. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Ngalim, Nurshaida (2015) Applying risk based testing methodology in mastercard regression testing activity for mastercard project. Masters thesis, Universiti Teknologi Malaysia.

Yan, Yen Qun (2015) Aquaponic system for self-sustain living. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Munir Zahari, Nor Hafizah (2015) Arithmetic logic unit design for silicon nanowire field-effect transistors logic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Hashim, Mohamad Hasruzairin (2015) ARM processor emulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusof, Nur Zulaikha (2015) Arsenic (III) removal from water using natural sedimentary rocks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamalruhanordin, Fara Lyana (2015) Arterial hemodynamics in patent ductus arteriosus stenting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sahel Ba-Karait, Nasser Omer (2015) Artificial immune system and particle swarm optimization for electroencephalogram based epileptic seizure classification. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Shukur, Osamah Basheer (2015) Artificial neural network and kalman filter approaches based on arima for daily wind speed forecasting. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ramli, Raiha Azene (2015) Assessing loss and expenses claim by prolongation cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussain, Hussain K. (2015) Assessing the moderating effects of organizational innovation on the relationship between transformational leadership and job satisfaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Lwti, Nabeel Katfan (2015) Assessment of disturbance impact of hydraulic jack in pile penetration using artificial transparent clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Wei Seong (2015) Assessment of office building energy efficiency using green building index and leadership in energy and environmental design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaf'i, Herul Azrul (2015) Assessment of onshore wind energy potential in Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Omar, Siti Shuwaibah (2015) The assessment of tailor-made optical fibre subjected to ionizing radiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Mohd. Saad, Norhashimah (2015) Automated brain lesion classification method for diffusion-weighted magnetic resonance images. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Fauzi, Mohd. Husaini (2015) Automatic application programming interface for multi hop wireless fidelity wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ho, Aik Hong (2015) Automatic detection, segmentation and classification of abdominal aortic aneurysm using deep learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahin, Mohd. Azrul Hisham (2015) Automatic wireless accelerometer monitoring system (AWAM) for slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rad, Mozafar Shokri (2015) Auxetic structures for energy absorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Bakar, Nor Amira (2015) Available transfer capability based on randomly generated probabilistic distribution function of wind speed using Monte Carlo simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Musa, Mohd. Roszaimy (2015) Awareness and understanding of government total asset management implementation strategy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Daddy, Zemnan Titus William (2015) Barriers to adoption of ISO 14001 environmental management system by the Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Oghabi, Mohsen (2015) Bearing capacity of circular footing on geocell reinforced sand deposit under cyclic loading. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Gamal Maged (2015) Behavior of self-compacting concrete incorporating recycle materials at high temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alenezi, Khaled Kh. D. Sh. O. (2015) Behaviour of cold-formed lipped C-channel with ferrocement jacket composite column under axial compression. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein, Dler Hassan (2015) Behaviour of rubberized asphalt mixture subjected to thermal loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Masnan, Mohamad Nazri (2015) Best practice for offshore platform deformation survey using global navigation satellite system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ab. Karim, Rozaliana (2015) Biochemical and morphological changes of UVB-Irradiated human skin fibroblast (HSF1184) cells on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad Zubir, Meor Mohd. Fikri (2015) Biodegradation and metabolic pathway of cresol red dye by selected fungi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Surendran Pillay, S. Sadish Kumar (2015) Biogas generation from palm oleochemical effluent for steam production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malek, Muhammad Khairuddin (2015) Bioprocessing development for anaerobic cultivation of probiotic bacteria bifidobacterium longum for high cell mass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shehu, Idris (2015) Bioprospecting for culturable psychrotrophic bacteria with extracellular hydrolytic enzymes activity from arctic lake sediments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mahmood, Aisha (2015) Blended learning environment to develop personas and themes in engineering students using mathematical oriented activities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Al-Tamimi, Ammar Sabeeh Hmoud (2015) Block mode decision in H.265 using pixel topology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ong, Chin Tong (2015) Block-based neural network mapping on graphics processor unit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yazdani, Fahimeh (2015) Blood cells sorting using cotton threads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Bioscience and Medical Engineering.

Aldin Hosseini, Seyed Jamal (2015) Bond behavior of grouted spiral and splice connection under direct axial and flexural pullout load. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aspon, Siti Zulaiha (2015) Boundary integral equation with the generalized Neumann kernel for computing green’s function for multiply connected regions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abedinpourshotorban, Hosein (2015) Branch coverage test case generation using genetic algorithm and harmony search. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sek, Wei Yee (2015) Business performance analysis for small and medium enterprises through system dynamics modelling: a case study of chemical production industry. Masters thesis, Universiti Teknologi Malaysia.

Abboud, Ayad Sami (2015) Calcium alginate caged multiwalled carbon nanotubes for the pre-concentration of polycyclic aromatic hydrocarbons from environmental water samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

P. Rajadran, Nisha (2015) Callus induction and development of suspension cell culture of Malaysian upland rice cultivar Panderas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Yusoff, Ahmad Razali (2015) Camera calibration for unmanned aerial vehicle mapping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Zakaria, Khiruddin (2015) Can bus application in smart building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ngu, Kek Siang (2015) Carbon nanotube field-effect transistor for a low noise amplifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Azizah (2015) The celebrity exposure in different media and their effects on destination awareness and purchase decision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ang, Siow Kuang (2015) Cellulases and xylanase production by 'Aspergillus fumigatus' SK1 through solid state fermentation for ethanol fermentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mortaza, Ahmad (2015) CFD modeling of flow induced vibration mechanism in sea water piping on a regasification terminal platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Nabila (2015) CFD study on aortic cannula (flow characteristics). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kurniawan, Lutfi (2015) The challenges faced by government contractors in managing the flyover projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Aris, Salimah (2015) Challenges of venture capital funding process in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Zubair, Suleiman (2015) Channel acquisition and routing system for real-time cognitive radio sensor networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Azol, Mas Elyza (2015) Characterisation of sharp edges Schottky contacts with nanostructure film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang, Abd. Rahim (2015) Characteristics of coal ash mixtures as replacement materials in ground improvement works. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Andalib, Ramin (2015) The characteristics of structural concrete using bacteria improvement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muthoovaloo, Navitra (2015) Characterization and antibacterial activity of hexadecyltrimethylammonium modified silver kaolinite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Liew, Kok Jun (2015) Characterization of extracellular proteases from Pseudomonas sp. 16D4 and Dermacoccus sp. 17D6 isolated from arctic regions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Shafei, Dianay Shafina (2015) Characterization of fiber optic sensor for liquid refractive index monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Ahmad, Mohd. Shahrulnizam (2015) Characterization of irradiated epoxidized natural rubber/polyvinyl chloride/carbon nanotubes nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Salehuddin, Siti Maizatul Farhain (2015) Characterization of polymethyl methacrylate / feather fiber / montmorillonite composites for dental post application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad Shuhaimi, Fatin Amalina (2015) Chemometrics analysis of petroleum-based accelerants in fire debris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamaludin, Rosmahaida (2015) Chemometrics and multiblock methods for quantitative structure-activity studies of artemisinin analogues and polychlorinated diphenylethers. PhD thesis, Universiti Teknologi Malaysia, Faculty of science.

Jamaludin, Rosmahaida (2015) Chemometrics and multiblock methods for quantitative structure-activity studies of artemisinin analogues and polychlorinated diphenylethers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Babiker, Amel Musa Taha (2015) Chitosan supported biosynthesized gold nanoparticles as catalyst for oxidation and reduction reactions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sadikin, Aziatul Niza (2015) Chitosan-filled filter media from lignocellulosic biomass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sadikin, Aziatul Niza (2015) Chitosan-filled filter media from lignocelulosic biomass. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Khor, Beng Hooi (2015) Chromobacterium violaceum R1-ferricyanide mediated biosensor for determination of biochemical oxygen demand. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Murugiah, Khovarthen (2015) Chronic kidney failure data management system with automatic classification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Musa, Umar (2015) Circular polarized textile antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saidin, Aminuddin (2015) Claims for additional preliminaries costs due to project prolongation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Tze Jia (2015) Classification of abnormal crowd behavior using image processing and state machines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abuhashish, Faris Amin Muflih (2015) Classification technique for human emotion in virtual reality using game-based brain computer interface. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Hasseim, Anith Adibah (2015) Classification techniques for handwriting difficulties among children in early stage of academic life. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Siddiqui, Zeeshan (2015) Cloud computing three-factor user authentication framework and protocols for telecare medical information system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ee, Poey Guan (2015) CNFET-based design ternary logic design and arithmetic circuit simulation using HSPICE. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Parvizpour, Sepideh (2015) Cold adaptations study of glycosyl hydrolase enzymes via computational methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sharifi, Mahdi (2015) Collaborative-based decision making for web service composition using service level agreement negotiation and crowdsourcing. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abd. Wahab, Nur Hidayatul Nadihah (2015) Color transformation for protanopia color vision deficiency using integration of image processing and artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kamaruddin, Siti Fatimah (2015) Combination of dried water hyacinth and oil palm empty fruit bunch biomass briquette as alternative fuel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Hamid, Hazirah (2015) Combination of low pressure steam heating and dilute acid pretreatment of palm biomass for fermentable sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Akrom, Nuramirah (2015) Combined empirical mode decomposition and dynamic regression model for forecasting electricity load demand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aznam, Siti Nur Amalina (2015) Combustion visualization and measurement in a closed vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noor, Shaista (2015) Commercialisation of academic research in higher education institutions of Pakistan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Kasgari, Mohammad Abedian (2015) Compact ultra-wideband dielectric resonator antennas. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mehdawi, Ahmed A. (2015) Comparative model for classification of forest degradation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and real estate.

Faruk Lawan, Umar (2015) Comparative study of fifty potential evapotranspiration models for urban area in tropical region. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusuf, Abdullahi Moallim (2015) Comparative study of regtangular microstrip patch antenna array design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chee, Khong Siong (2015) Comparison between predicted and actual ground settlement improved using stone columns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Teing, Chai Yoon (2015) Comparison of soil index properties value for different pre-drying conditions on clayey soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Shukri (2015) The comparison on the milestone and monthly payment of project performance in public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Nurul Bashirah (2015) The comparison study of different additives on the characteristic and performance of ficus deltoidea- loaded niosomes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Nasir, Shah (2015) A comparitive study on immobilised mycelium and spores of p. chyrisosporium in pva-alginate-sulfate beads for textile dyes effluent treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Drahman, Siti Hasyyati (2015) Composite honeycomb core sandwich plate with facesheet indentation model subjected to low-velocity impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muniyandi, Shantha Kumari (2015) Composite material production of nonmetallic printed circuit board waste with recycled high density polyethylene. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al-shanini, Ali Hassan Ali (2015) Comprehensive quantitative dynamic accident modelling framework for chemical plants. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Fu Long (2015) Computational analysis of high pressure water jetting for natural gas pipeline. Masters thesis, Universiti Teknologi Malaysia.

Narayanasamy, Menaka (2015) Computational approaches for optimal design of tailor made biofuel blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Din, Mazura (2015) Computational based automated pipeline corrosion data assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Hamid, Kazemi Esfeh (2015) A computational fluid dynamic framework for modeling and simulation of proton exchange membrane fuel cell. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Azli, Anis Athirah (2015) Computational study of turbulent unconfined swirl flames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Pandian, Santha (2015) Computer aided approach for occupationally healthier chemical assessment and selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Deba, Ahmad Aliyu (2015) Conceptual framework of service learning in technical and vocational education at the Nigerian tertiary education. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Sadeli, Salina (2015) The conceptual model of life cycle costing automation on green building energy efficient criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabri, Shaikhah (2015) Conch strombus as indicator of metal contaminations in Southern and Eastern Johor waters. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdolahi, Ahmad (2015) Conductive polymer coatings towards inhibition of microbial-induced corrosion of low carbon steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sirkunan, Jeevan (2015) Configurable version management hardware transactional memory for embedded multiprocessor field-programmable gate array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Suliman T., Alatawi Salem (2015) A conformance measurement model for quality assurance standard in e-learning: a case study in University Of Tabuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Harirchian, Ehsan (2015) Constructability comparison between IBS and conventional construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fard Jahromi, Soudabeh Sabetian (2015) Construction and analysis of protein-protein interaction network associated with human sperm-egg interaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hasan Sarkar, Md. Shamim (2015) Construction safety and management practices in Bangladesh. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Tian Fuh (2015) Construction stage analysis of a post-tensioned segmental crosshead. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kalkhouran, Abolfazl Amanollah Nejad (2015) A contingency-based framework of strategic management accounting, sophisticated budgeting and costing techniques in Malaysian small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Gan, Gilbert Siang Yang (2015) Contractor's implied duty to warn design defects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Permana, Assad Idea (2015) Contractor’s liability under unforeseen ground conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Syed Salim, Syed Najib (2015) Control of a pneumatic actuator system using enhanced nonlinear proportional integral derivative controller algorithm. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Ahmadu (2015) Control of active suspension for full car model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Majid Abdullateef (2015) Control of energy conversion in a hybrid wind and ultracapacitor energy system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Husein, Nor Ain (2015) Control of group velocity dispersion in single mode fiber based on stimulated Brillouin scattering. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Salleh, Sazilah (2015) Controller design of hydraulic actuator system using self-tuning and model reference adaptive control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Umar, Ismail Abubakar (2015) Controllers design of an active suspension system based on half car model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Ee Ting (2015) Copper (II) removal from aqueous solution using cobalt-doped iron oxide polyvinyl alcohol-alginate beads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Orojali Zadeh, Farahnaz (2015) Corporate governance, risk disclosure and cost of equity capital in the Malaysian public listed firms. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Isyaku, Usman Bature (2015) Correlative interferometry for angle of arrival estimation and signal source locating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Ahmad Ammar Luqman (2015) Cost estimation model of structural steel for superstructure of wellhead platform in oil and gas industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Kadhim, Fatimah (2015) Creep characteristics of austenitic stainless steel foils under oxidative and non-oxidative environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sun, Zhendong (2015) Critical requirements of integrated quality management system for project manager in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Afzali, Mahboubeh (2015) Cross layer routing and scheduling for multi-channel Wimax mesh networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mad Kaidi, Hazilah (2015) Cross-layer hybrid automatic repeat request error control with turbo processing for wireless system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hajmohammadi, Mohammad Sadegh (2015) Cross-lingual sentiment classification using semi-supervised learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Md. Zaini, Siti Ernee (2015) Crowd detection from aerial images. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wahidin, Suzana (2015) Cultivation of nannochloropsis sp. for biodiesel production via microwave irradiation direct transesterification using ionic liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bala, Muhammad Isa (2015) The cultural landscape values of a nupe community in Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Isah, Abubakar Danladi (2015) Culture integration and spatial morphology in public housing transformation in northern states of Nigeria. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Mohd. Zain, Nurul Hanani (2015) Customer satisfaction measurement towards improving project delivery for Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khiru Nasir, Nadhira Atiqah (2015) The cytotoxic effect of typhonium flagelliforme and clinacanthus nutans on breast cancer cell line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Zainal Abidin, Nurashikin (2015) Dam break flood inundation modelling for Klang gate dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Jing Ying (2015) Damage based reliability of smart industrialised building system for residential units. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Magira Tom, Abubakar (2015) Data disaster recovery model for the association of bureaux de change operators of Nigeria, ABCON Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ahmad Dahalan, Amira Sarayati (2015) Data sampling time scheduling based on maximum allowable loop delay for networked control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamedali Abdalla, Ahmed Abdalla (2015) Dataset generation and network intrusion detection based on flow-level information. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zarzoor, Ahmed Kadhim (2015) Defect detection in pipeline using acoustic emission. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahman, Mohammad Mahbur (2015) Deformation behaviour of self-compacting concrete containing high volume palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syed Yusoff, Sharifah Izyani (2015) Deformation studies on slope area using a digital close range photogrammetry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Romli, Hajaratul Azila (2015) Delay in settlement of final account. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Almasi, Davood (2015) Deposition of the hydroxyapatite particles on the polyether ether ketone surface for orthopaedic applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sumeru, Sumeru (2015) Design and analysis of ejector as an expansion device in a split-type air conditioner. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razak, Nor Farhah (2015) Design and characterization of narrow linewidth fiber laser for wireless communication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zakaria, Zulailah (2015) Design and control of electric vehicle charger. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Mohd. Johari @ Esa (2015) Design and development of 3-rrs parallel platforms using simmechanics. Masters thesis, Universiti Teknologi Malaysia.

Mustapa, Mohd. Shamsulizan (2015) Design and development of a flow forming machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Roozbahani, Fatemeh (2015) Design and development of an electrospun nanofiber using electrospinning technique for tissue engineering application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Zakaria, Ahmad Syazni (2015) Design and development of low-cost friction stir welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rzooki, Mustafa Ghanim (2015) Design and development of MIMO antenna for point-to-point application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sharifi, Foad (2015) Design and optimization of heat exchanger network in olefin unit of oil refinery. Masters thesis, Universiti Teknologi Malaysia, Razak Faculty of Technology and Informatics.

Zeinali, Mohammadjavad (2015) Design and optimization of innovative magnetorheological damper with low temperature. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Mat Rosid, Salmiah Jamal (2015) Design and optimization of lanthanide oxides based catalysts for carbon dioxide methanation. PhD thesis, Universiti Teknologi Malaysia, Faculty of science.

Hajmirsadeghi, Reihaneh Sadat (2015) Design factors that influence the effective use of Meydan in Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Anuar, Nuhairi (2015) Design of the streaming processor architecture for microkernel controller and ALU. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lagehr, Naglea A. E. (2015) Detection and amplification of putative hydrogenase 3 operon in Citrobacter sp. L17. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Omar, Nur Afifah (2015) Detection of cross-country fault on distance protection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusup, Amalina (2015) Detection of fluid leakage using ground penetrating radar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sarbalaei, Raheleh Hosseinian (2015) Detection of hydrocarbon level in distilled water using laser induced acoustic techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kamarudin, Rosaniza (2015) Detection of paraquat in calliphorid maggots by capillary electrophoresis for diagnosing fatal poisoning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chivatsi, Jonathan Nyoka (2015) Detection of structural deformation from 3D point clouds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hew, Li Chyi (2015) Determinants of auction success and auction price premium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Chakraborty, Ananya Raka (2015) Determinants of human resource information system actual usage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hosseini, Seyed Ali (2015) Determinants of knowledge sharing intention in e-learning. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Hussin, Noorsubha (2015) Determination of failure zone of vane shear test using artificial transparent soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Siti Sarah (2015) Determination of mass attenuation coefficients for several natural minerals in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muda, Nur Hanismahiza (2015) Determination of nutrients and metals content in liquid generated from composted food waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rashid, Fauziah (2015) Determination of precise geodetic coordinate using global navigation satellite system (GNSS) precise point positioning method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Santika, Santika (2015) The determination of the intersection of projective plane P2 (K) curves based on the bezout's theorem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Santika, Santika (2015) Determination of the intersection of projective plane P2 (K) curves based on the Bezout’s theorem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Muhammat, Nurul Nadilah (2015) Determination of unit skin friction for pile in sand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nor Hassan, Abdul Hafiz (2015) Development and analysis of pulse detonation engine (PDE) with fuel-air premixed intake system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razali, Ili Rabihah (2015) Development of a continuous microwave reactor for the production of zinc oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Pang, Tuck Seng (2015) Development of a modular photovoltaic maximum power point tracking converter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nizam, Yoosuf (2015) Development of a portable Muslim prayer time table clock. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Morsin, Mardiah (2015) Development of a relay using USRP platform for indoor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sapiaa Md. Nordin, Nik Abdul Hadi (2015) Development of asymmetric polysulfone and zeolitic imidazole framework 8 mixed matrix membrane for carbon dioxide and methane separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Omar, Ahmad Sahar (2015) Development of colour-mark sensor-based calibration system for timing devices with seven-segment liquid-crystal-display. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sabirin, Muhammad Rushidi (2015) Development of cooperative relay using universal software radio peripheral. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad @Harun, Norhamidah (2015) Development of cost driven work breakdown structure for project monitoring and controlling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhd. Radzi, Muhd. Abu Bakar (2015) Development of electrical discharge machining power generator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Suhail Najm (2015) Development of microwave sensing system to measure the sweetness and ripeness of pineapple. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainir, Rubiatul Addawiyah (2015) Development of polarization and depolarization current measurement and analysis system using labview. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Nazri, Noor Aina (2015) Development of polyacrylonitrile/polyacrylonitrile-g-poly(vinyl alcohol) hollow fiber ultrafiltration membranes with enhanced anti-fouling properties. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Olyaiy, Mahmood (2015) Development of process-based entropy measurement framework for organizations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Joohari, Ilya (2015) Development of self-compacting lightweight concrete made of palm oil clinker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zahari, Mohd. Khairulnizam (2015) The development of total quality management (TQM), work culture and employee performance relationship in Malaysia manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hashim, Khairusy Syakirin Has-Yun (2015) Development of waste minimization awareness model for university campus. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Maniam, Darmadevaindra (2015) Die defect classification using image processing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Daud, Dharmeziyana (2015) Differential extraction of DNA types in semen mixtures from multiple male contributors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Azdarpour, Amin (2015) Direct and indirect aqueous mineralization using red gypsum for carbon dioxide sequestration. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Zubir, Farid (2015) Direct integration of push-pull amplifier and aperture coupled antenna. PhD thesis, School of Electronic, Electrical & Systems Engineering.

Muhammad Salim, Muhammad Arfin (2015) Discourses of tourism in the official tourism websites in Southeast Asia. PhD thesis, Universiti Teknologi Malaysia, Language Academy.

Shahami, Nurhidayu (2015) Discrimination of different type of meats using laser induced breakdown spectroscopy and chemometric techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Idris, Zainab Ladidi (2015) Diversity of culturable psychrotrophic bacteria from arctic soil samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Nading, Nadiana (2015) Domestic tourist’s perception on Sarawak ethnic native’s food. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yakub, Nasir Abubakar (2015) Doppler method for angle of arrival estimation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saharin, Nurul Syazlin (2015) Dosimetric properties of AL2O3:C, Mg exposed to external cobalt-60 gamma irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Mhareb, Mohammad Hasan Salman (2015) Dosimetric properties of lithium magnesium borate glasses doped with dysprosium and phosphorus oxide for radiation dose measurement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. R. Ramachandran, Vinod (2015) Dynamic epileptic activity analysis based on geometric structure of electroencephalographic signals. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Noroozi, Erfaneh (2015) Dynamic hashing technique for bandwidth reduction in image transmission. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Mohd. Bahari, Zaili (2015) Dynamics characteristics and energy absorption of fibre-metal-laminate (FML) thin-walled tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alzahrani, Mohammed Ali R. (2015) An e-portfolio acceptance model from lecturers perspective in Taif University. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Rahimin, Nornikman (2015) Earhthing performance of HV/MV substation and its effect on nearby structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Taher, Taher Yaseen (2015) Economic aspects of weight saving in the design of braced steel frames using BS5950 and EC3. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M. Razali, Normasliza (2015) EEG-based emotion classification using wavelet based features and support vector machine classifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Al-Moalemi, Hafedh Ahmed Abdullah (2015) The effect of abrus precatorius methanol leaves extract in inhibiting glucose absorption in in vitro study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Yasin Al-Sheyab, Saif Al-Deen (2015) Effect of antimicrobial agent toward bacteria from skin of cantaloupe fruit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ayokunle, Omoyola Tolulope (2015) The effect of balcony on thermal performance of high rise office building in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Victor Samson, Shalinee Samson (2015) The effect of biological, chemical, and physical pre-treatment on solid pineapple waste for fermentable sugar production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Rosli, Siti Erlyane (2015) Effect of catalyst loading in direct methanol fuel cell using sulfonated-poly-ether-ether-ketone/charged surface modifying macromolecules membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Alias, Muhammad Anwar (2015) Effect of cations on microbial aggregation using brevibacillus panacihumi strain ZB1, lysinibacillus fusiformis strain ZB2 and enterococcus faecalis strain ZL. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Manap, Norhafizah (2015) The effect of coconut shells on engineering properties of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ehsani, Zahra (2015) Effect of customer perceived value on customer relationship management performance in automobile industry in Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Baloch, Abdul Hameed (2015) Effect of different machining parameters on surface roughness of aluminum alloys based on Si and Mg content. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Pakdel, Ali (2015) The effect of employee motivation, self-esteem and creativity on suggestion systems practices in Iranian automotive industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ishak, Siti Amirah (2015) The effect of fibrin extracellular matrix properties for the in vitro angiogenesis assay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Zakaria, Izzah Hazirah (2015) Effect of filler on self-healing properties of silicone rubber in electrical tree phenomena. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Choy Soon (2015) Effect of fines content and plasticity on liquefaction susceptibility of sand matrix soils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhamad, Nor Izzati (2015) The effect of flow experience and organizational perspective among academicians in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Isa, Nur Farah Ain (2015) Effect of graphene oxide (GO) in improving the performance of high voltage insulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hasbullah, Nurul Ai'zzah (2015) Effect of heat treatment on the microstructures and corrosion behaviour of quaternary mg-2.2zn-3.7re-0.5ca alloys for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Maziar, Azimzadeh Irani (2015) Effect of knowledge sharing on organizational performance through customer satisfaction in the Malaysian banking industry. PhD thesis, Universiti Teknologi Malaysia,International Business School.

Mohamed Fadzel, Raimi (2015) Effect of lighting difference in reconstruction of three dimensional dense model using close range photogrammetry. Masters thesis, Universiti Teknologi Malaysia.

Hussain, Jawad (2015) The effect of market and learning orientations on organizational performance of manufacturing small and medium sized enterprises in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Nayyerifallah, Siyamak (2015) The effect of modern Iranian family culture towards high-density vertical development housing design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lim, Chih Hoo (2015) The effect of outer surface roughness for evaporator tube in the desalination plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sith, Nurain (2015) The effect of oversized lane width and lane shoulder on heavy vehicle parking on residential streets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Meskaran, Fatemeh (2015) The effect of perceived trust, perceived security and attitude on online purchase intention in Malaysia public universities. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Jamal, Afiqah (2015) Effect of plant growth regulators in plant regeneration of Malaysian upland rice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Bahlol, Nabeel Najm (2015) Effect of post treatment parameters on corrosion resistance of Ti-13Nb- 13Zr coated with hydroxyapatite via electrophoretic deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Muhammad ‘Aasim Asyafi’ie (2015) The effect of reverberant sound level on the intelligibility of spoken Malay words. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alias, Yusliza (2015) Effect of rock mass properties on skin friction of rock socket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Ahmad Zuhdi (2015) Effect of tide on flood modelling and mapping in Kota Tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yunusa, Gambo Haruna (2015) Effect of transport layer system on suction distribution for tropical residual soil slopes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Kamsol, Naziha (2015) The effect of work-life balance and work-family conflict in determining life satisfaction and job satisfaction among employees in MPKu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Wahab, Ahmad Mubin (2015) Effective aerosol optical thickness retrieval algorithm using modis 500 metre data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abu Bakar, Noorsakinah (2015) Effective location of thyristor controlled series capacitor by sensitivity based method for congestion management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chien, Cassendra Bong Phun (2015) Effective microorganisms on organic matter with carbon and nitrogen mineralisation for empty fruit bunches composting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ali, Surayahanim (2015) The effectiveness of continuing tourism related education (CTRE) for tourist guides in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zainor Rahim, Aliff Ezwan (2015) The effectiveness of river water treatment plant in improving water quality in Sungai Kemensah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Sani, Nur Syazana (2015) Effects of compatibilizer on morphology, mechanical and thermal properties of polylactic acid/natural rubber blend. Masters thesis, Universiti Teknologi Malaysia.

Hassan, Mas Ayu (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadiq, Misbah (2015) The effects of influential behavioural factors on investors’ decision making in stock market of Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yusuf, Taliat Ola (2015) Effects of palm oil fuel ash and metakaolin blend on properties of geopolymer mortar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal Abidin, Nor Aliaa (2015) The effects of risk management practices, risk behaviour on research and development project performance in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Maya Sarah, Maya Sarah (2015) Effects of time and temperature on process and crude palm oil quality with microwave irradiation sterilization. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sidek, Nor Khairunnisa (2015) Efficiency optimization of an induction machine using constant optimal flux control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rouf, Md. Abdur (2015) Efforts and methods of Al-Imam Zafar Ahmad Al- Tahanawi in the sunnah Al- Nabawiyyah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Mohd. Sharip, Mohd. Ridhuan (2015) Electric field distribution in nanocomposites containing one-dimensional nanofiller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Kamal, Muhammad Safwan (2015) Electrical and chemical properties of thermally aged vegetable-based oils as high voltage insulating material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammad Yazid, Amirul Akmal (2015) Electrical discharge machining of hybrid material using copper electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruddin, Nadiah (2015) Electrical signatures and water absorptivity of a new insulation material for high voltage applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hambali, Nur Ashikyn (2015) Electrochemically deposited zinc oxide morphologies on graphene on insulators. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Azahar, Nur Syazana (2015) Electronic mucosa system for complex odour recognition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Che Jusoh, Nurfatehah Wahyuny (2015) Electrosynthesis of zinc oxide-copper oxide supported on mesostructured silica nanoparticles for photocatalytic decolorization of methyl orange. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Vatumalai, Sivaprakash (2015) Employee’s attitude and managerial support on lean benefits. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Banki, Mohammed Bala (2015) Empowering family owned tourism business in Obudu Mountain Resort. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed Noah, Norul Fatiha (2015) Emulsion liquid membrane extraction of palladium from simulated electroplating wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ishak, Mohd. Hafizal (2015) Energy consumption behaviour assessment model for student accommodations in Malaysian public uniiversities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and real estate.

Tie, Siang Fui (2015) Energy management of multiple sources for electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Alzubaidi, Mohammed Abdullah Omar (2015) Enhanced analysis of kippo-honeypot in cloud. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Al-Maimani, Maqbool Ramdhan Ibrahim (2015) Enhanced aspect level opinion mining knowledge extraction and representation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Farouk, Abbas Umar (2015) Enhanced exponentially weighted moving average (EWMA) control chart performance with autocorrelation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sharifara, Ali (2015) Enhanced face detection framework based on skin color and false alarm rejection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ameen, Mohammad Hazim (2015) Enhanced facial expression using oxygenation absorption of facial skin. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamed, Ashara Banu (2015) Enhanced framework for alert processing using clustering approach based on artificial immune system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yusof, Ahmad Fadhil (2015) Enhanced information systems continuance model for mobile wellness applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdolvahab, Ehsani Rad (2015) Enhanced level set segmentation method for dental caries detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdul Hamza, Taha Mahdi (2015) Enhanced separation of azeotropic mixtures by ultrasound-assisted distillation process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Adzhar, Noraziah (2015) An enhanced simulated annealing approach for cylindrical, rectangular mesh, and semi-diagonal torus network topologies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohammed Hasan, Sabah (2015) Enhancement of digital grayscale image watermarking using sparse matrix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Heng, Hui Xian (2015) Enhancement of genetic algorithm for diabetic patient diet planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ali Akhbar, Mohd. Faizal (2015) Enhancement of heat transfer coefficient in an automobile radiator by using nanocoolant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Hashim, Nur Zafirah (2015) Enhancement of information security management system by embedding corporate ethical virtue as ethical issues solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Balash, Farhad (2015) Enhancement of junior academics professionalism through research and development activities in an Iranian Medical University. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Salemi, Samin (2015) Enhancement of natural language processing approach for automated generation of object constraint language. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohamed Ramlee, Mohd. Fazril (2015) Enhancement of quality of working life among site officers at Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Razak, Siti Noraiza (2015) The enhancement of residual electric field in water electrolysis by green laser irradiation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Omar Khalaf, Omar Tahseen (2015) Enhancement of voltage stability and power losses for distribution system with distributed generation using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Elengoe, Asita (2015) Enhancing human breast cancer cells destruction using combination of adenovirus expressing P53 and hyperthermia treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Elengoe, Asita (2015) Enhancing human breast cancer cells destruction using combination of adenovirus P53 and hyperthermia treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Chong, Chung Keong (2015) Enhancing SRAM performance of common gate FinFET by using controllable independent double gate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Josiah, Kekere Temitope (2015) Ensemble methods in intrusion detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Nor Shah, Mohd. Badril (2015) Error handling and controller design for controller area network-based networked control system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shahid, Pezhman (2015) Estimating the environmental impacts of carbon emissions from fuel consumption during construction activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Mazlan, Anum Syahirah (2015) Estimation of base capacity for bored pile embedded in hard stratum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kareem, Jamal Ahmed Hama (2015) Ethical and psychological factors in 5S and total productive maintenance on production line effectiveness. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Tahir, Mohd. Rafizal (2015) Evaluating the control of vehicles confiscation and forfeiture by Royal Malaysian Customs, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

R. Anthony, Santhanamary (2015) Evaluating the development of leadership self-efficacy among the aspiring school leaders. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Saeed, Khurram (2015) Evaluating the renewable energy sources in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ruslan, Nur Fathin (2015) Evaluation of Acalypha indica extracts for antioxidant and antibacterial activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Md. Noor, Mohd. Amirul Hakim (2015) Evaluation of compactive effort and time available for compaction on hot mix asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mirnazari, Javad (2015) Evaluation of different techniques for generating landslide susceptibility map. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Widodo, Widodo (2015) Evaluation of hole quality on micro drilling AISI 304 austenitic stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmadi, Mohammad (2015) Evaluation of multistory buildings using performance-based seismic in life safety level. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saputri, Reny (2015) Evaluation of rain cell models using Indonesian meteorological radar data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahmud, Nur Azri (2015) An evaluation of the business support services rendered by university-based incubator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ibrahim, Mohammad Izazi (2015) Evaluation of various milling strategies in supporting advanced CAD/CAM environment for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Ali, Mohamad Faizul (2015) Evaluation of waterflooding using carbonated water for oil recovery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Goh, Alfred Pui Teck (2015) Evaluation on Malaysia safety and health induction course for construction worker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lee, Bee Yoke (2015) Examining the relationship between emotional intelligence, job satisfaction and perceived job performance among school teachers in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Malano, Elfianingsih (2015) The expectation and perception of international student for delivery service quality in International Student Centre (ISC) in public universities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hosen, Nadzirah (2015) The experience of self-drive international tourists in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ghazali, Ahmad Dairobi (2015) Experimental analysis of pulse detonation engine fuelled by biogas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khaleghi, Mostafa (2015) Experimental and computational thermal analysis of vortex flame in meso-scale combustor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali A., Header (2015) Experimental study of acoustic emission technique for concrete defect detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Thamer Rashid (2015) Experimental study of heat transfer in asphalt solar collector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Ghanbari, Mohammad Ghanbari (2015) Exploring the potential of nanofillers for advanced thin film nanocomposite forward osmosis membranes fabrication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum & Renewable Energy Engineering.

Chan, Kian Hwa (2015) Fabrication of polyethersulfone membrane by polyethyleneglycol coated cobalt-doped iron oxide for copper (II) removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmed Shoani, Mohamed Tahir (2015) Face-recognition based security robot incorporating omnidirectional vision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Shoani, Mohamed Tahir (2015) Face-recognition based security robot incorporating omnidirectional vision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Karno, Md. Razib (2015) Facilitating resource allocation decision through bibliomining: the case of UTM's library. Masters thesis, Universiti Teknologi Mara, Faculty of Management.

Naaif, Ibrahim (2015) Factors affecting the information security awareness in maldives customs service. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Alrahman Jawad, Lamyaa Abd. (2015) Factors effecting the acoustic properties of date palm fiber. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Al-Wardi, Ahmed Hamood Mohammed (2015) Factors impeding the development of Oman spatial data infrastructure. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and real estate.

Ahmadi, Hossein (2015) Factors influencing adoption of hospital information system framework in Malaysian public hospitals. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Najafpour, Hamed (2015) Factors influencing sense of security in residential neighbourhood in Johor Bahru. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tenku Izham, Tenku Nur Shahrul Izami (2015) Factors influencing the project success from the contractors' perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahman, Mohammad Obaidur (2015) Failure of Ohm’s law and circuit design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Hisham, Mohamad Aliff Zaquan (2015) Faktor dan piawaian dalam penyediaan laporan kajian kemungkinan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Nooradzhar, Fathin Shahiera (2015) Faktor kejayaan kritikal (CSF) bagi pelaksanaan sistem pengurusan kualiti (QMS) di organisasi pengurusan fasiliti (FM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformatiom and Real Estate.

Badrol Hisham, Mohd. Nazirol Syafiq (2015) Faktor persekitaran fizikal dalaman pejabat terhadap kepuasan pekerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Burtah, Muhamad Aswad (2015) Faktor-faktor membuat keputusan untuk penyumberan luar bagi perkhidmatan penyelenggaraan Institusi Pengajian Tinggi Awam di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abubakar, Alkali Ibrahim (2015) Familial caregiving architectural provision in Nigerian hospital wards. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Othman, Mohammad Faizi (2015) Fault modeling of chirality variation for carbon nanotube field effect transistor and its effect on circuits performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Kamil, Siti 'Aishah (2015) Fear of crime within non-gated residential communities in the urban context. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Sobri, Sobrina (2015) Feasibility study implementation of a micro-grid in the hotel building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Omar, Mohd. Saifulizan (2015) Feasibility study of hybrid PV/diesel energy system at Institut Kemahiran Mara Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jalaluddin, Nur Ayuni (2015) Feasibility study of hybrid system for resident area in Pulau Perhentian Kecil, Terengganu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Thamadharan, Kavitha (2015) Feasibility study of the acceptance of e-assessment by lecturers from security perspective. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Hassan, Hafiza Aini (2015) Features of discussion skills of high English as a second language performers among pre-university students. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohammad Arif, Hatamullah (2015) Features of effective E-commerce web accessibility for the partially blind users. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Yusof, Zulkifli (2015) Field programmable gate array architecture of proportional-integral-derivative controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Cheah, Hui Fuen (2015) Finfet based design of XOR and XNOR using HSPICE. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Chia Wui (2015) Finite-difference-time-domain simulation of insulated monopole in brain tumor hyperthermia treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Shaharudin (2015) A first principle approach for the strength analysis of a semi-swath vessel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hock, Cheong Jun Quan (2015) Fitting soil-water characteristic curve by using unimodal and bimodal soil physical properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mallum, Isa (2015) Flexural performance of steel fiber reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Cheong, Lip Sing (2015) Flexural strength of fibre reinforced concrete under elevated temperature. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rawi, Nor Hayati (2015) Flood flow reduction via optimization of outlet control structure at Setapak Jaya pond. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Masri, Mohd. Irsyam Noorfawana (2015) Flood mapping for Sungai Bunus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Zahri, Azura (2015) Flood mapping using geographic information system (GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainuddin, Mohamad Aiman (2015) Forecasting revenue passenger enplanements using wavelet-support vector machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sudar, Noorazliza (2015) Forensic investigation using ground penetrating radar (GPR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Najib, Nazarin Ezzaty (2015) Forest cover change in Peninsular Malaysia using satellite remote sensing data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Zin, Mohd. Hayyi (2015) Forest encroachment mapping in Cameron Highlands, using cadastral parcel and remote sensing datasets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Talaiekhozani, Amirreza (2015) Formaldehyde removal from synthetic contaminated air using a biotrickling filter reactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Noor Mala (2015) Forms and communicative intent of metadiscourse in Malaysian and British undergraduate engineering lectures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Abd. Rahim, Siti Hajar (2015) Formulation of a new filter aids material for fabric filtration system. Masters thesis, Malaysia-Japan International Institute of Technology.

Ishak, Muhamad Safwan (2015) Fourier transform technique for analytical solution of diffusion equation of concentration spherical drops in rotating disc contactor column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Latiff, Norliza (2015) Fractionation and characterization of polyphenols rich extract from labisia pumila leaves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bandi, Shamsulhadi (2015) Framework development of bills of quantities accuracy in construction organisation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Dawot, Nur Intan (2015) A framework for evaluating viral marketing effectiveness using social media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zakaria, Siti Aminah (2015) Framework of computer-aided sustainable integrated process design and control for reactor systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Awang @ Muda, Mohd. Aswarudin (2015) Framework of measurement engineer workload at Public Work Department district of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subri, Siti Sunaidah Sukma (2015) A frequency controller using fuzzy in isolated microgrid system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Jelani, Azliza (2015) Frequency estimator using artificial neural network for electrical power system dynamics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gajibo, Mohammed Mustapha (2015) Frequency reconfigurable metamaterial resonant antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Harun, Nor Farida (2015) Fuel composition transients in solid oxide fuel cell gas turbine hybrid systems for polygeneration applications. PhD thesis, McMaster University, School of Graduate Studies in Partial Fulfilment of the Requirements.

Hemdi, Abdul Rahman (2015) Fuzzy based sustainability indicator for product design and development process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shumran, Alshammari Fahad (2015) Fuzzy sliding mode controller for cascaded multilevel inverter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Ghazali, Norizzawati (2015) Gallium nitride nanowire by nitridation of electrochemically grown gallium oxide on silicon. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Rohmad (Rahmad), Siti Haniah (2015) Garis panduan dan etika e-Dagang bagi produk fizikal menurut perspektif syariah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Sulaiman, Siti Zubaidah (2015) Gas explosion characteristics in confined straight and 90 degree bend pipes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Kiakalaieh, Amin Talebian (2015) Gas phase glycerol dehydration to acrolein over supported silicotungstic acid catalyst. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zhang, Ye (2015) Gender preferences and Instagram hashtag usage on #Malaysianfood. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ullah Khan, Hidayat (2015) Generalised interval-valued fuzzy ideals and filters in ordered semigroups. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sobhanmanesh, Ali (2015) Geometrical effect on the behavior of embankment on soft ground. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sobhanmanesh, Ali (2015) Geometrical effect on the behaviour of embankment on soft ground. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelhakim, Mesloub (2015) Glazing design for bilateral daylighting in public school classrooms in northern part of Algeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Merapan, Kirubaharan (2015) Glycerine pitch from glycerine concentration process as alternative fuel for boiler operations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zainuddin, Azmirawahida (2015) Gold nanoparticles assisted structural and optical modifications of samarium doped sodium-lithium tellurite glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ong, Wen Jian (2015) A graphics processing unit based network intrusion detection system with bloom filter pattern matching algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zulkurnain, Ahmad Uways (2015) Graphics processing unit based parallel copy move image forgery detection scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Md. Abas, Mohd. Hafizullah (2015) Haiwan dalam Al-Quran menurut tafsir ilmi kajian terhadap lebah semut dan labah-labah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilization.

Wong, Xue Yuan (2015) Hardware acceleration of 2D convolution using systolic array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Noordin, Mohamad Amin (2015) Hardware core of pipelined thinning algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Teo, Hong Yap (2015) Hardware/software system-on-chip co-verification platform based on logic-based environment for application programming interfacing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishak, Mohamad Shaiful Ashrul (2015) Hasil pembakaran emisi rendah dengan menggunakan bahan api biodiesel berbantukan aliran berpusar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Kamarulafizam (2015) Heart murmur detection and analysis using multipoint auscultation system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sadegh, Omidreza (2015) Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Siew Chiao (2015) Heavy metal tolerance of lysinibacillus fusiformis ZB2 isolated from textile effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Mohd. Yani, Mohammad Safwan (2015) Heavy metals removal from landfill leachate using vertiveria zizanioides and artificial roots. Masters thesis, Universiti Teknologi Malaysia.

Kori, Mohamad Ikhwan (2015) Hemodynamic effect of Patent Ductus Asteriosus (PDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Asral, Asral (2015) High amplitude wave liner effects on journal bearing performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ugochukwu, Ijeomah Geoffrey (2015) High field transport in carbon nanotube. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaffie, Siti Munirah (2015) High resolution digital elevation model generation by semi global matching approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abdul Razak, Muhammad Nizam (2015) High resolution impulse analysing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kassim, Ahmad Tarmimi (2015) High resolution impulse analysing system - hardware and software implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tang, Hing Kwong (2015) High strength green concrete by using biomass aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fu, Yu (2015) Homer analysis of wind energy for China. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullahi, Auwal (2015) House price estimation using multiple regression analysis approach for mass appraisal model in Kaduna North, Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment and Surveying.

Md. Rahani, Zawanah (2015) Hubungan antara faktor tekanan dengan kesan tekanan dan prestasi kerja guru di sekolah menengah daerah Kota Tinggi, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mat Rashid, Norul Huda (2015) Hubungan antara ganjaran dan etika kerja Islam dengan komitmen dalam kalangan pekerja di Jabatan Pembangunan Persekutuan Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Sedik, Siti Salmah (2015) Hubungan antara konflik interpersonal dengan kesejahteraan psikologi organisi dalam kalangan pegawai Imigresen Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Social Sciences and Humanities - School of Human Resources Development & Psychology.

Satriadi, Satriadi (2015) Hubungan etika kerja islam terhadap prestasi kerja guru di SD Negeri Kecamatan Tanjung Pinang Timur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ibrahim, Suhaini (2015) Hubungan jaringan antara perusahaan kecil dan sederhana industri pelancongan di Kampung Cherating Lama, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Nasseri, Mahsa (2015) Human epithelial type 2 cell classification based on concatenated features and machine learning algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Md. Said, Mohd. Sollehudin (2015) Human head phantom material characterization for microwave imaging system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Malik, Muhammad Noman (2015) Human values identification and assessment tool development for TQM context. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Abdul Sukur, Muhammad Ishak (2015) Hybrid dielectric resonator antenna for ultra high frequency band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Syafrullah, Mohammad (2015) Hybrid fuzzy multi-objective particle swarm optimization for taxonomy extraction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ruzan, Iza'in Nurfateha (2015) A hybrid genetic algorithm with mapreduce technique for cloud computing energy efficiency. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Makhtar, Nooraini (2015) Hybrid intelligent system for demand forecasting in die-casting industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Nor Syahidatul Nadiah (2015) Hybrid medium access control using token approach in wireless sensor network for high traffic applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sadi, Mohammadali Kazerooni (2015) A hybrid model for assessing the quality performance of demolition contractors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Munap, Daing Hanum Farhana (2015) Hydrocarbon concentration measurement by using fiber optic displacement sensor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad, Ahmad Fahrulrazie (2015) Identification of attack/misuse with email header forensic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alsarhan, Ali Ata Zidan (2015) Identification of commonly used medicinal plants in Kangkar Pulai and their therapeutic evaluation as anti-diabetic. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Zainal, S. Hasimah Wati (2015) Identification of gaps and adoption of communication strategies by second language modest speaker in group discussions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohsenizadeh, Saeid (2015) Impact characteristic and energy absorption of auxetic foam-filled square tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elhabib, Mohamed A. Ateia (2015) The impact of board competency and ownership structure on firm performance. PhD thesis, Universiti Teknologi Malaysia,International Business School.

Dhiraj Singh, Navinder Kaur (2015) The impact of extensive reading on English language proficiency and motivation to read. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad, Siti Fairus (2015) The impact of global financial crisis on the performance of Malaysian listed property companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Okpa, Obaji Nkem (2015) The impact of government policy on the relationship between critical success factors and incubation contributions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Zainol, Zanariah (2015) The impact of PV location on voltage profile and line losses. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al-Rahmi, Waleed Mugahed Ali (2015) The impact of social media use in collaborative learning towards learning performance among research students. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Feng, Shu Fang (2015) The impact of supply chain management practices on supply chain management performance in Chinese manufacturing industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Othman, Nurul Izzaida (2015) The impact of value management on project success in felda projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Banu A., Ruksana (2015) The impact of work-life balance policies and work-life balance issues on employee’s satisfaction in Oman. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Cheong, Wei Wei (2015) Implementation of unmanned aerial vehicle moving object detection algorithm on intel atom embedded system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammed Mona, Jammel Mohammed Ali (2015) Implementing smoke test technique on online application. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Almaktar, Mohamed A. M. (2015) An improved algorithm for photovoltaic module temperature prediction and its techno- economic impact on energy yield. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hasan, Haswadi (2015) Improved clustering approach for junction detection of multiple edges with modified freeman chain code. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ali, Derakhshanasl (2015) Improved covariance matrix evolution strategy algorithm for stochastic dynamic unequal area facility layouts in an open area. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Arman (2015) Improved design solution for motion resistance problem through integration of robust design and theory of inventive principle (TRIZ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alsayyh, Moh’Dali Moustafa (2015) Improved image compression scheme using hybrid of discrete fourier, wavelets and cosine transformation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abu Bakar, Nur Najihah (2015) An improved method for university building’s energy efficiency index using cluster approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Elssied Hamed, Nadir Omer Fadl (2015) Improved scheme of e-mail spam classification using meta-heuristics feature selection and support vector machine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Chew, Kew Hong (2015) Improved total site heat integration incorporating pressure drop and process modifications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamad Ameen, Abdulqader Othman (2015) Improved two-phase solution strategy for multiobjective fuzzy stochastic linear programming problems with uncertain probability distribution. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Masoud Eid, Ahmad Mustafa (2015) Improvement of anti-inflammation of swietenia macrophylla self nanoemulsion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Alipour, Ameneh (2015) Improvement of power quality using UPFC in a multi bus distribution system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Bukar, Abba Lawan (2015) An improvement of voltage quality in low voltage distribution system using dynamic voltage restorer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shahroom, Hamizah (2015) Improvement on system and components of a rotating electric field mill for atmospheric electric field measurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ul Haq, Mohammad Asif (2015) Improving energy saving evaluation in lighting using daylight utilization with area segregation technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Siao Yen (2015) Improving social responsiveness of children with autism spectrum disorder through neuro-physical exercise. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohamad Ali, Nurhasyimah (2015) Improving water meter reading operations using optimization techniques for Syarikat Air Johor. Masters thesis, Universiti Teknologi Malaysia.

Sea, Lillian Shun Yi (2015) In silico analysis and truncation studies of the c terminal alpha amylase from anoxybacillus species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Paul, Alvin (2015) In vitro antiviral activity of polygonum minus extracts against herpes simplex virus 1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Elnehrawy, Naema Yousri Fatthallah (2015) In vitro study of polygonum minus extract effect on skin cells healing capacity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdul Rahim, Mohamad Ashrulnizam (2015) Incentivising knowledge sharing behavior among JKR profesional. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suhaimi, Aminuddin (2015) Inclined link as shear reinforcement in reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subramanian, Priyavahani (2015) Incorporating K-MAP into KM-oriented BPR: a case study at industrial training management of UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Dahrawi Edrus, Sakinah (2015) Increasing the adoption of project management best practices in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lagiman, Norizam (2015) Indikator kesejahteraan perancangan bandar Islam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Aman Nor, Nor Farahiyah (2015) Influence of churning and thawing temperatures on yield and quality of virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lim, Ai Ling (2015) The influence of e-participation as antecedent on behavioural intention to use among Sarawak e-filers. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Yaacob, Mardhiah (2015) The influence of emotional intelligence and occupational stress towards job satisfaction among teachers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Wong, Mikkay Ei Leen (2015) The influence of employee perceptions of training on affective commitment and turnover intentions in SME. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Dambatta, Murtala Sule (2015) Influence of heat treatment and severe plastic deformation (SPD) ON Zn-3Mg alloy properties for bio-implant application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lu, Xi (2015) Influence of psychological, internet use and demographic factors on pathological internet use among university students. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohammed Na’aim, Mohd. Zahirudin (2015) Influence of real-time kinematic network in cadastral surveying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohd. Saidi, Mohd. Syamsul Affendy (2015) Influence of silver nanoparticles concentration on spectroscopic characteristics of samarium doped zinc tellurite glass. Masters thesis, Universiti Teknologi Malaysia.

Abdullah Bajunaid, Mohamed Abobakar (2015) The influence of social and cultural capital of students in private higher education institution on students' satisfaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Zaki, Wan Ahmad Faiz (2015) The influence of success factors toward software development project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ya’Acob, Nurulfara (2015) Influence of suction induced by grass root. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Arman Shah (2015) Influence of ultrasonic vibration on TiN coated biomedical TI-13Zr-13Nb alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amran, Dayang Nur Fatthanah (2015) Influence of work team effectiveness on project delivery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Farizul Nizam (2015) Influences of groundwater, rainfall, and tides on beach profiles changes at Desaru beach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Manulang, Muammar Rosyadi (2015) The influences of islamic work ethics toward organizational commitment in Hidayatullah Islamic Boarding School Batam, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Ridza, Badrul Hisham (2015) Influencing factors in non-landed residential property facilities for management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed Khazin, Mohamed Zul Hazmi (2015) Information security awareness model in social networking for teenagers. Masters thesis, Universiti Teknologi Malaysia.

Nik Abd. Aziz, Nik Norashikin (2015) Inherent occupational health assessment for chemical batch processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yaacob, Mohamad Syahrul Syazwan (2015) Inhibition of sulphate reducing bacteria to enhance methane yield in anaerobic digester. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Raman, Syazwani (2015) Innovation and research and development in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aghajari, Nezal (2015) Innovative operation strategies and performance outcomes of Malaysia manufacturing small and medium enterprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Maghsoudi, Mohammad Javad (2015) Input shaping-based control schemes for a three dimensional gantry crane. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, How Hwan (2015) Integrated circuit design based on charge-modulated field effect transistor for deoxyribonucleic acid biosensing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shaaban Binsilm, Salma Abdullah (2015) Integrated nanoneedle-microfluidic system for single cell intracellular temperature measurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Aziz, Ezah (2015) An integrated pinch analysis framework for low carbon industrial site planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Amran, Nur Aireen (2015) Integrated system of automatic identification system (AIS) and radar fot port traffic management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shariati, Omid (2015) An integrated under frequency load shedding protection based on hybrid intelligent system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Benferdia, Youcef (2015) Integrating cooperative users to develop framework for an effective mobile physiotherapy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Saganuwan, Mohammed Umar (2015) Integrating technostress creators and inhibitors in using accounting information system to improve job satisfaction and task performance. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Misman, Nor’Aqilah (2015) Integration of median filter and oriented field estimation for fingerprint identification system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yap, Yoon Loy (2015) Intelligent neural network for modelling and control of an automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muneer, Saqib (2015) An interaction between financial practices and firm performance with moderating effect of agency cost in Pakistani corporate sector. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Baharudin, Siti Mastura (2015) Interaksi dalam pembelajaran berasaskan masalah secara kolaboratif menerusi talian dan kesannya terhadap pemikiran kritis pelajar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Syahruna, Alham R. (2015) Interaksi dinamika budaya dan ekonomi dalam amalan pertanian di Sulawesi Selatan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Sadir, Sahba (2015) Interfacial wicking flow through hierarchical structure of natural cellulose fibers for biomedical microfluidic devices. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ding, James Tse Wen (2015) Interpreting contractual provision: extension of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmad Fauzi, Muhammad Nazirul (2015) Inventory for knowledge management in construction organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Kent Hoo (2015) Investigation of excitation coils configuration and particle swarm optimization of coil’s diameter in magnetic nanoparticles imaging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Hasanudin, Muhammad Akmal (2015) Investigation on morphology and structural properties of 2D carbon nanostructure grown via 150 MHz PECVD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khoo, Hui Xian (2015) Irrational beliefs as mediator in the relationship between activating event and stress among secondary school teachers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Chum, Zhi Xian (2015) Isogeometric analysis of plane stress structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alias, Elme (2015) Isolation and characterisation of mitochondrial protein from Orthosiphon stamenius in normal and copper stress conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Low, Jiun Hor (2015) Isolation, characterization and preparation of spent coffee ground tannin as eco-friendly wood adhesives. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Selamat, Nur Zalina (2015) Isothermal crystallization study and mechanical properties of polypropylene/polystyrene/styrene-ethylenebutadiene- styrene blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sainee, Norazean (2015) Issues associates with communicating the architect notice by means of e-mail under PAM 2006. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Hamid, Noorhayati (2015) Jabatan Kerja Raya project delivery excellence through effective project communication management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Ghafar, Aimi Syamimi (2015) Joint relay selection and bandwidth allocation for cooperative relay network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rachmawaty, Rachmawaty (2015) Judicial interpretation of consequential loss in construction contract. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Jaafar, Suraya Hani (2015) Kajian keberkesanan kualiti pangkalan data ukur kadaster berdigit kebangsaan (NDCDB) mengikut perspektif pengguna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformatiom and Real Estate.

Abu Hanifah, Noor Zati Hani (2015) Kajian radiologi alam sekitar di Iskandar Malaysia, Johor, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mallanti, Andi (2015) Keberkesanan modul nilai keusahawanan holistik dalam kalangan pelajar Sekolah Menengah Vokasional di Batam, Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Rohaizad, Nor Aizal Akmal (2015) Keberkesanan modul pengajaran dan pembelajaran dalam perkembangan kecerdasan emosi murid-murid prasekolah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Dasmawati, Dasmawati (2015) Kemampuan kaunselor sekolah menengah atas negeri di Kota Makassar menghadapi perubahan organisasi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ismail, Azril Khairol (2015) Kemampuan memiliki rumah oleh golongan belia bumiputera (kajian kes : Gelang Patah). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ismail, Azizah (2015) Kemampuan pembiayaan perumahan untuk golongan bumiputera. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Anwar, Haerul (2015) Kenabian dalam pandangan Fazlur Rahman. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Shariff, Siti Suraya (2015) Keperluan latihan berasaskan kompetensi kakitangan barisan hadapan hotel bajet, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abdul Kadir, Sukwan (2015) Kepimpinan transformasi guru besar di daerah Bulukumba Sulawesi Selatan Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ishari, Muhammad Alham (2015) Kepuasan dan kesetiaan pelanggan kajian untuk industri hotel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Johar, Siti Sarawati (2015) Kesan pengaruh kecerdasan emosi, personaliti dan estim kendiri ke atas komitmen terhadap organisasi. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Samsudin, Suhana (2015) Kesan persekitaran fizikal pejabat terhadap stres di tempat kerja. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Misni, Mirra Natasha (2015) Kesan politik organisasi ke atas hubungan di antara gaya kepimpinan transformasi dan komitmen terhadap organisasi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hashim, Suhaizal (2015) Kesan sistem pembelajaran pentaksiran portfolio kolaboratif terhadap proses pentaksiran dan pembinaan pengetahuan pelajar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hanapi, Zaliza (2015) Kesepadanan latihan terhadap pekerjaan dalam kalangan graduan kejuruteraan elektrik di kolej komuniti. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ghazali, Norasraf (2015) Kesesuaian "international union for conservation of nature" dalam pemeliharaan keunikan landskap budaya yang terdapat di tanah bencah Setiu. Masters thesis, Universiti Teknologi Malaysia.

Ghazali, Razatulshima (2015) Knowledge integration mechanism as mediator between leadership styles and enterprise systems success. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Haron, Zulkiflee (2015) Konsep Al-Shifa' dalam Al-Quran : kajian terhadap metode rawatan Ibn Qayyim Al-Jawziyyah. PhD thesis, Universiti Malaya, Faculty of Islamic Civilization.

Khayrurrijal, Khayrurrijal (2015) Kritikan Syed Muhammad Naquib Al-Attas terhadap falsafah bahasa barat moden dan pascamoden. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Lai, Long Wee (2015) Lactic acid production from microwave-alkali pretreated oil palm trunk biomass using simultaneous saccharification and fermentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abu. Samaan, Noor Fazura (2015) Land acquisition issues for Jabatan Kerja Raya's road work project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Izni Izzati (2015) Landfill site suitability using geographic information system and analytical hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elsayed, Ashraf Osman Ibrahim (2015) Learning enhancement of three-term backpropagation network based on elitist multi-objective evolutionary algorithms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sulaiman, Nuraini Hidayah (2015) Learning software user interface design model for children with cerebral palsy. Masters thesis, Universiti Teknologi Malaysia.

Devadas, Kumuthamalar (2015) Level of awareness of risk management within it group : case study TM Berhad. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

W. Zulkiffle, Wan Zuliyana (2015) Life cycle assessment of global warming potential in precast building component. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arputhasamy, Saravana Kumar (2015) Lightning as a new renewable energy source. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abu Hassan, Nur Rasyiqah (2015) Liveable city from the resident‘s perception of urban design quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Husain, Arastu Sajjad (2015) LNG/Dual fuel powered fishing boats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Ismadi (2015) Load distribution mesh routing for wireless mesh network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Soysa, Ranga Dayan (2015) Local community perspective of tourism in world heritage sites, case study of Galle Fort, Sri Lanka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ghasemi, Moslem (2015) Local community’s perception of the appropriateness and success of tourism development models in lower Kinabatangan region, Sabah, East Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Albshir Budiea, Ahmed Mokhtar (2015) Long term prediction of pipeline corrosion under tropical seabed sediment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Roshafima Rasit (2015) Low density polyethylene tapioca starch degradable biofilms with palm oil based processing aid for blown film extrusion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mahamad Hakimi, Ismail (2015) Machinability study of uncoated and coated carbide tools when drilling CFRP/metal stacks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Li, Zheyu (2015) Macroeconomic factors effect on housing price index in China. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Md. Salleh, Mohammad Annuar (2015) Maintenance management assessment in a local manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mazenan, Mohd. Nizam (2015) Malay articulation system for early screening diagnostic using hidden markov model and genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Lau, Chee Yong (2015) Malay statistical parametric speech synthesis with intelligibility improvement using artificial intelligence. PhD thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Awang, Nor Hazilawati (2015) Managing software evolution through midleware and policy-based software adaptation framework. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Algarni, Abdullah Mohammed M. (2015) Market orientation in higher education and innovativeness as a mediating variable. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Chofreh, Abdoulmohammad Gholamzadeh (2015) A master plan for the implementation of sustainable enterprise resource planning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yahya, Mohd. Salehuddin (2015) Mathematical model of lead transfer in human body. Masters thesis, Universiti Teknologi Malaysia.

Admon, Mohd. Ariff (2015) Mathematical modeling and simulation in an individual cancer cell associated with invadopodia formation. PhD thesis, Osaka University, Faculty of Science.

Zergani, Sara (2015) Mathematical modeling for tsunami waves using lattice boltzmann method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Idris, Nor Amirah (2015) Mathematical modelling of unsteady biomagnetic fluid flow and heat transfer with gravitational acceleration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khamis, Nur Syahidah (2015) Matroid structure of dynamic graph model of evaporation process in a boiler system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Bakar, Suhaira (2015) Mckeen matrix application portfolio: a case study in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohd. Pauzi, Nurul Noraziemah (2015) Measurement of building energy intensity towards potential of building retrofit for M50, Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shafie, Mohd. Hafiz (2015) The measurement of compaction through field density test (FDT) in the embankment strata. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shafie, Mohd. Hafiz (2015) The measurement of compaction through field density test in the embankment pit strata. Masters thesis, Universiti Teknologi Malaysia.

Barau, Aliyu Salisu (2015) Measurement of rapid landscape fragmentation in Iskandar Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Moradi, Amir Hosein Deluyi (2015) Measuring efficiency of automotive parts suppliers from entrepreneurial orientation by using data envelopment analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abdussalam, Mamoon (2015) Mechanical properties of HFCVD microcrystaline diamond coated on seeded WC substrate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Nur Azmyra (2015) Mechanical, thermal and characterization of chitosan, nano precipitated calcium carbonate single and hybrid filler/ poly (vinyl chloride) composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Hakim, Nur Wahidah (2015) Mechanical, thermal and physical properties of chitosan and chitin filled compatibilized polyamide-6/polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jamshidy, Majid (2015) The mediating effect of board of directors functions on the relationship between intellectual capital and firm performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Moqbel Ali, Fahmi Fadhl (2015) The mediating effect of corporate social responsibility and spirituality on balanced scorecard in Yemen’s private universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Tahsildari, Hamed (2015) The mediating effect of innovative behavior and entrepreneurial passion on the relationship between transformational leadership and organizational effectiveness in Islamic Banks. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Illyas Tan, Mohd. Iskandar (2015) A mediating effect of knowledge creation on the relationship between social capital and research and development performance in Malaysian research universities. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Alshammari, Abdulsattar Mathqal (2015) The mediating role of organisational innovation in the relationship between strategic planning process and organisational performance in nonprofit organisations in the Kingdom of Saudi Arabia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Bagheri, Mahdi Mohammad (2015) The mediating role of supply chain integration and agility on SMEs performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Kwok, See Ying (2015) The mediation effect of value on experience and service quality toward satisfaction in Malaysian tourism industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ibrahim, Abdul Fatah (2015) Membangunkan sistem perolehan data berintegrasi kos rendah untuk pemantauan struktur kejuruteraan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Razak, Mohd. Hafizuddin (2015) Membrane bioreactor for the tertiary treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohd. Mokhtar, Nadzirah (2015) Membrane distillation for textile wastewater treatment using polyvinylidene fluoride cloisite 15A hollow fiber composite membranes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohammad Sipellizan, Salina (2015) Mengenalpasti pilihan cenderamata oleh pelancong antarabangsa di Melaka Bandaraya Bersejarah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jusoh, Rohayu (2015) Mesostructured silica nanoparticles supported electrosynthesized goethite in cationic surfactant for photodegradation of 2–chlorophenol. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lotepi, Nor'ain (2015) Metal oxide surge arrester trending and analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Imani, Aliakbar (2015) Metaphor analysis of Dr. Mahathir’s business speeches. PhD thesis, Universiti Teknologi Malaysia, Language Academy.

Airij, Awais Gul (2015) Microcontroller-based human stress detection system using fuzzy logic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohammad Diab, Nateg (2015) Microstructure and mechanical properties of Al-Alloy with rare earth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tok, Hong Yuan (2015) Microstructures and corrosion behavior of biodegradable Mg–Ca–xBi AND Mg–Ca–Zn–xBi alloys for biomedical implant application. Masters thesis, Universiti Teknologi Malaysia.

Mushtaq, Faisal (2015) Microwave-assisted pyrolysis and co-pyrolysis of coal and oil palm shell with coconut shell activated carbon as microwave absorber. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mustafa, Abu Bakr Mohamed Ali (2015) Millimeter-wave grid array antenna for 5G mobile communication networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Azmi, Aizat (2015) Miniaturized planar capacitance tomography system using fan beam projection technique for stagnant samples visualization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shapiai, Mohd. Faiz (2015) Minimizing conflicts during construction stage by using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Nor Adibah (2015) Mitigating inter-carrier interference in orthogonal frequency division multiplexing system using scaled alpha pulse shaping technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Naghshbandi, Reza (2015) Mitigation methods of progressive collapse for a 10-story reinforced concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hassan @Wan Hussein, Wan Najihah (2015) Mitochondrial dysfunction of 3t3-l1 adipocytes induced by oligomycin and antimycin a. Masters thesis, Universiti Teknologi Malaysia.

D'Cruz, Ryan (2015) Mixed-income housing as an alternative to the ‘Projek Perumahan Rakyat’ in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mas’ood, Najlaa Nazihah (2015) Model development of estimating oil discharge for sustainable green port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirabolghasemi, Marva (2015) A model for enhancing performance in using social network sites for breast cancer patients. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ungku Mohd. Zakaria, Ungku Aminah (2015) Model kompetensi pembantu hal ehwal islam gred S17 di Jabatan Agama Islam Negeri Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abdul Rahman, Mohd. Shahril (2015) Model pelaksanaan pemanfaatan ruang akademik bagi universiti awam di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and real estate.

Farag Elhagari, Usama Tharwat (2015) A model-based testing framework for trusted platform module. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zaudi, Nur Qamarina (2015) Modeling and control of ventilation and heating system using neuro-fuzzy inference system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chin, Ee Mei (2015) Modeling and simulation of graphene three branch junction using verilog-A. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kareem, Hayder Jasim (2015) Modeling and simulation of hybrid system for electricity generation in rural area (microturbine, biodiesel, solar photovoltaic and battery/MTBDSPB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhammad, Bashir Bala (2015) Modeling and vibration control of piezoelectric actuator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Pabli, Fathin Asila (2015) Modeling of electric double layer capacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Isa, Ibrahim (2015) Modeling of image processing algorithms for hardware-software co-simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nelson, Okello (2015) Modeling of landslide occurrence in the hilly areas of Bududa District, Eastern Uganda. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Azniza (2015) Modeling of water tree degradation in underground polymeric power cable using time domain reflectometry method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Obaid, Hussein Abed (2015) Modeling sewer overflow of Karbala city with large floating population. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chin, Huei Chaeng (2015) Modeling the effects of phonon scattering in carbon nanotube and silicon nanowire field-effect transistors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Puah, Lih Chii (2015) Modeling water quality parameter bod in johor river and muar river. Masters thesis, Universiti Teknologi Malaysia.

Mustafar, Izni (2015) Modeling, simulation and design of an improved high power factor bridgeless sepic converter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Geak Kun (2015) Modelling and active vibration control of flexible manipulator structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zhou, Kaiqing (2015) Modelling and reasoning of large scale fuzzy petri net using inference path and bidirectional methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ahmad, Ismail (2015) Modelling and simulation of PWM switched autotransformer for voltage SAG mitigation using MATLAB/SIMULINK. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Napishah (2015) Modelling of crude oil prices using hybrid arima-garch model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Othman, Siti Rabe’Ah (2015) Modelling of external corrosion growth of steel pipeline in soil for tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yakubu, Mahadi Lawan (2015) Modelling of road surface pollution buildup and washoff using rainfall simulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yakubu, Mahadi Lawan (2015) Modelling of road surface pollution buildup and washoff using rainfall simulator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Memon, Abdulmanan (2015) Modelling single grounding electrode using COMSOL. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Katimin, Muhammad Farihin (2015) Moderating effects of perceived supports for creativity on the relationship between individual factors and creativity among Malaysian research officers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Emami, Maryam (2015) Moderating effects of social environment on the relationship between individual components of creativity and creativity. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Kamarudin, Nur Hidayatul Nazirah (2015) Modification of mesoporous silica nanoparticles for ibuprofen loading and release in drug delivery. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abdulkadir, Musa (2015) A modified particle swarm optimization based maximum power point tracking for photovoltaic converter system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Szali Januddi, Mohd. Al-Fatihhi (2015) Monotonic and cyclic behaviour of trabecular bone under uniaxial and multiaxial loading. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhd. Yusof, Muhd. Firdaus (2015) Moving ship detection for unmanned aerial vehicle using atom processor for camera vision. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saleh, Abdulrazak Yahya (2015) Multi-objective evolutionary algorithms of spiking neural networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Razmara, Pegah (2015) Multi-round divisible real-time scheduling algorithm on multiprocessor platforms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Hassan Khalaf, Sarah (2015) Multiband MIMO antenna for wireless devices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Seng Poh (2015) Multiple 2D self organising map network for surface reconstruction of 3D unstructured data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Roslan, Siti Fairuz (2015) Multiple input multiple output dielectric resonator antenna for long term evolution applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Goh, Lyn Dee (2015) Multistage artificial neural network in structural damage detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sajjadi, Seyed Mahdi (2015) Multivariate optimization of highway alignment using multi-criteria evaluation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sharifuddin, Roqiyah Nur (2015) Mutual termination agreement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yong, Tze Mi (2015) Nanocrystalline diamond deposited on tungsten carbidecobalt substrates using hot filament chemical vapour deposition technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aini, Syamsi (2015) Nanozarah titanium-karbon terkurung dalam silika mesoliang sebagai mangkin untuk pengoksidaan stirena. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Aziz, Fazli (2015) Network reconfiguration and distributed generation sizing in radial distribution network using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Chee Wei (2015) Network-on-chip floorplanning and application mapping using cross-entropy method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hor, Win Han (2015) Neuro-network modelling and control of flexibly mounted cylindrical riser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Movahed, Zohreh (2015) A new analytical method for characterization of fractured reservoirs. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ahsan, Amin Mohamed (2015) New descriptor for object detection using an improved ensemble-based technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chude-Olisah, Chollette Chiazor (2015) New face recognition descriptor based on edge information for surgically-altered faces in uncontrolled environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Amir Sjarif, Nilam Nur (2015) New human action recognition scheme with geometrical feature representation and invariant discretization for video surveillance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Teo, Chee Loong (2015) New microwave based transesterification techniques for biodiesel production from cultivated microalgae. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Teo, Chee Loong (2015) new microwave based transesterification techniques for biodiesel production from cultivated microalgae. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ahmad, Hasnita (2015) The new payment clauses in the PWD 203/203A (REV. 1/2010) conditions of contract in aligning to CIPAA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Al-Hasan, Waleed S. Hasan (2015) A new steganography technique using magic square matrix and affine cipher. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Noor, Hafidah (2015) A new streamer discharge chamber for nox removal from heavy vehicles: a simulation study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Roudini, Azizallah (2015) New venture resources, international entrepreneurial capability and performance of Malaysian Halal international new ventures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ahmad, Nor Azimah (2015) Nickel removal from electroless wastewater by using coagulation flocculation and ion exchange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Wan Ismail, Wan Nor Zuriatina (2015) Non profit oriented entrepreneurs: sase study of non governmental organisation and social entrepreneurship in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hassan, Zulhilman (2015) Non-intrusive electrical energy monitoring based on intelligent system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Usman, Sahnius (2015) Non-invasive discrimination between diabetic states (HBA1C<8% and HBA1C>10%) using photoplethysmography. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Imaduddin, Fitrian (2015) A novel magnetorheological valve with meandering flow path structure. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Jehad, Dhafir Giyath (2015) Numerical investigation of turbulent nanofluid flow effect on enhancing heat transfer in straight channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jeman, Mimi Sulastrie (2015) Numerical simulation in foundation due to settlement problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Porman, Jumari (2015) Numerical simulation of vortex combustion for various air-fuel configurations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad, Ahmad Faiz (2015) Numerical simulation of wind pressure distribution in urban buildings of random staggered arrays. Masters thesis, Malaysia-Japan International Institute of Technology.

Bakhtiarinejad, Marjan (2015) Numerical study on the influence of various nanofluids on the efficiency of flat-plate solar collectors (FPSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fong, Soon Fei (2015) Object classification using deep learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahim, Falah Jabar (2015) Object tracking from unmanned aerial vehicle using Kanade-Lucas-Tomasi tracker and speeded up robust features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Said, Kamilah (2015) Occupational noise exposure amongst road construction workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Siaw Yee (2015) Omega algebra model of clinical waste incineration process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rahibulsadri, Rasheila (2015) On the establishment of the lowest astronomical tide for marine parcel commencement in peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Muda, Nor Wajihan (2015) One step activation using potassium hydroxide on prepared activated carbon for base transesterification reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Rabu, Siti Nazleen (2015) Online instructor scaffolding in enhancing undergraduate students' critical thinking. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Mohd. Hamka, Nurhamizah (2015) Ontology evaluation approach for semantic web documents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yunianta, Arda (2015) Ontology-based semantic heterogeneous data integration framework for learning environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Said Dawaud, Raghda Saifeddin (2015) Optical and thermoluminescence properties of samarium or dysprosium doped lithium borate glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Noorden, Ahmad Fakhrurrazi (2015) Optical bistability in mobius microring resonator. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ramli, Liyana (2015) Optimal composite nonlinear feedback control with multi objective algorithms for active front steering system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Muhammd, Faiz (2015) Optimal design of passive power filters using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hafizan, Ainur Munirah (2015) Optimal heat exchanger network synthesis with operability and safety consideration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Hanafi, Mohd. Zainolarifin (2015) Optimal heat sink based on heat transfer model and particle swarm optimization method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rosli, Rashidah (2015) Optimal heat transfer of heat sink design based on electronic package thermal distribution using COMSOL package software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mamat, Nasirah (2015) Optimal placement and sizing of distributed generation unit by loading margin approach for voltage stability enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Hassan, Wan Zakaria (2015) Optimal proportional integral derivative controller for automatic voltage regulator system using particle swarm optimization algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nasrollahpourniazi, Fatemeh (2015) An optimization model for blocks allocation to service vessels in a port container terminal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakwoi, Iliya Solomon (2015) Optimization of a linearly polarized radial line slot array antenna design for direct broadcast satellite services. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ganeson, Theivanan (2015) Optimization of areca catechu seed oil extracted by supercritical carbon dioxide (scco2) using principle component analysis (PCA). Masters thesis, Universiti Teknologi Malaysia.

Abdul Latif, Azuan (2015) Optimization of biomass production of pseudomonas fluorescens in a stirred tank bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical & Energy Engineering.

A. Hamid, Khairedza Rahmi (2015) Optimization of cultivation medium for levan production using bacillus subtilis in semi-industrial scale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Chen, Siew Chin (2015) Optimization of formulation and process condition for downsizing of labisia pumila and ficus deltoidea loaded niosome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chua, Yong Ping (2015) Optimization of laser cutting parameter of acrylic by using DMAIC approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Noorilyana (2015) An optimization of mixing process parameters for soy sauce production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aliyu, Abubakar Kabir (2015) Optimization of power quality monitors in transmission system network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Goh, Shee Yin (2015) Optimizing agrobacterium-mediated transformation parameters of melastoma decemfidum ROXB EX JACK. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdullah, Jaharatul Dini Karen Lee (2015) Optimum utilization of quarry dust as partial replacement of sand in green concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samidi, Zuryatie (2015) Organizational justice perception as predictor of job satisfaction and organization commitment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Yuniarto, Adhi (2015) Palm oil mill effluent treatment using aerobic submerged membrane bioreactor coupled with biofouling reducers. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dadum, Hamza Usman (2015) Palm-polyetheretherketone porous carbons as sorbents for gas adsorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dadum, Hamza Usman (2015) Palm-polyetheretherketone porous carbons as sorbents for gas adsorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Che Abd. Ghani, Asnida (2015) The parallelization of helmholtz equation related to breast cancer growth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Rosli, Ruzaini (2015) Parameter identification for fault detection of power transformer using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nasruddin, Fakhrizal Azmy (2015) Parametric study on a conceptual badminton racket using finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Mohd. Zawawi, Wan Akmal ‘Izzati (2015) Partial discharge behaviour of cross-linked polyethylene - natural rubber blends nanocomposites as electrical insulating material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang, Noor'Aliaa (2015) Partial discharge characteristics on epoxy-boron nitride nanocomposite due to ageing time under high voltage stress. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mousa, Layth Fouad (2015) Partial discharge characteristics on palm-based for transformer oil application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rahman, Amirah (2015) Partial stroke testing for emergency shutdown valve using integrated PLC control design and human-machine interface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Manap, Nurasyidah (2015) Particle bombardment-mediated transformation of Malaysian rice MR 232 callus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Ahmad Shah, Fathihah (2015) Passive design approach towards energy efficient building envelope for individual residential. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashim, Mega Suria (2015) Pattern of wayfinding and spatial cognition for effective spatial planning of theme park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Razak, Arrauzah (2015) Pattern reconfigurable antenna for radar applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Badroldin, Mohd. Khairul Anas (2015) Payment culture in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hassan, Wan Hasmida (2015) Peat soil stabilization using Magnesium Chloride. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kaharuddin, Kaharuddin (2015) Pelaksanaan pendidikan percuma untuk sekolah menengah atas di Sulawesi Selatan Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Saliman, Fadzleen Norsyahira (2015) Pelaksanaan sistem pengurusan kualiti di dalam projek pembinaan (PQMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Tarmizi, Nurul Izzati (2015) Pelarasan garis panduan dalam prosedur penyerahan lombong kuari. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abbas, Kasmawati (2015) Pembangunan profesionalisme guru seni budaya sekolah menengah pertama di bandar Makassar Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Wan Harun, Mohammad Amir (2015) Pembinaan model pelan pemakanan berdasarkan prinsip Halalan Tayyiban. PhD thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilisation.

Mohd. Room, Mohd. Hafis (2015) Pemetaan sungai berskala besar menggunakan fotogrametri jarak dekat dan sistem pesawat udara tanpa pemandu. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wirman, Metsra (2015) Pemikiran tasawuf Sunan Bonang (1450-1525 M) berdasarkan naskah suluk wujil. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Rais, Sitti Hamsina (2015) Pendekatan pembelajaran inkuiri dalam kemahiran menulis bahasa Inggeris di madrasah negeri Makassar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ernawati, Andi (2015) Pengajaran holistik guru Sekolah Menengah Negeri Bandar Makassar, Sulawesi Selatan, Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Salim, Kalbin (2015) Pengajaran matematik berasaskan animasi untuk meningkatkan kefahaman pelajar pada topik dimensi 3 di sekolah menengah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Hartati, Hartati (2015) Pengekstrakan Swietenia mahagoni menggunakan karbon dioksida lampau genting dan potensi ekstrak sebagai penyembuh luka. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasan, Hamzah (2015) Penggunaan GPS dalam kerja-kerja semakan garis dasar EDM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abidin, Zauwiah (2015) Penggunaan huruf Ya’ dalam sintaksis bahasa arab dalam kalangan pelajar Madrasah Alsagoff Al-Arabiah, Singapura. Masters thesis, Universiti Teknologi Malaysia, Faculty of Islamic Civilisation.

Mohd. Razak, Nurhafizatul Haswani (2015) Penglibatan sektor awam dan swasta dalam pengurusan sisa pepejal melalui pendekatan pengurangan, guna semula dan kitar semula (3R). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Che Amat, Muhamad Firdaus (2015) Penilaian potensi perisian sumber terbuka dalam pengendalian data geospatial di pejabat tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mukhtar, Norazimah (2015) Peranan ciri-ciri destinasi dan kepuasan pelancong kepada lawatan ulangan ke Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Liew, Jan Fui (2015) Perceived image of Chinese tourists on Malacca world heritage sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rashid, Wirya Najm (2015) Perceived leadership styles, entrepreneuiral orientation and commercialization of university research. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Rashid, Wirya Najm (2015) Perceived leadership styles, entrepreneurial orientation and commercialization of university research. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abd. Rahim, Shayfull Zamree (2015) Performance evaluation of conformal and straight cooling channels on injection moulded part. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suboh, Siti Fatimah (2015) Performance evaluation of multistage adsorber design for mercury removal from produced water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Rahman, Siti Saimah (2015) Performance of bearing capacity for eco-friendly raft pile foundation system (ERP System) in soft soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Hamid, Abdul Rahim (2015) Performance of cold in place recycle method for different stabilization agents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suleiman, Abubakar Abdullkareem (2015) Performance of dielectric properties due to the presence of moisture in vegetable insulation oils and kraft paper immersed in the oils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Amaludin, Adriana Erica (2015) Performance of geothermal energy piles under thermo-axial loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohd. Arif (2015) Performance of improved savonius vertical axis marine current turbine rotor design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yiak, Siw Chien (2015) Performance of piecewise gamma baseline hazard function in Bayesian survival analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah Sani, Nur Aimie (2015) Performance of polyphenylsulfone/copper benzenetricarboxylate framework nanofiltration membrane for organic solvents separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Gholami, Mehran (2015) Performance of steel sections strengthened with carbon fibre reinforced polymer plate under tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Usman, Jamilu (2015) Performance of ternary blended cement mortar containing palm oil fuel ash and metakaolin. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zolfeghari Far, Sayyed Yaghoub (2015) Performance of unpaved laterite road treated with chemical additives and waste tire. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teh, Zhi Huan (2015) Performance prediction of prefabricated vertical drain in soft soil using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad, Abubakar (2015) Photocatalytic degradation of methyl orange using TiO2 impregnated activated carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Nor, Nur Umisyuhada (2015) Photocatalytic oxidation of phenol, cyclohexanol and hexanol by titania dispersed on mesoporous silica MCM-41. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ebadi, Hadi (2015) Physical attributes on place attachment in Malaysian urban parks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lim, Li Yee (2015) Physicochemical and microbial profile of oil palm empty fruit bunches compost treated with effective microorgnisms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lee, Ween Shin (2015) Physics instructional context and learners’ epistemological beliefs. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Elias, Siti Hanna (2015) Phytoremediation system for treating metals in ceramic industry wastewater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ariff, Mohd. Afendi (2015) Piles performances behavior of marine structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Song Hok (2015) Pinch-based targeting for production planning for small and medium enterprise. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Mohamad Nor, Alif Syarafi (2015) Planar electromagnetic sensors array for nitrate and sulphate detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gubran Alabidi, Ebrahim Sailan (2015) Planar monopole antennas with reflection plane for human body centric communication. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Yusof, Nur Farhana (2015) Polarization and depolarization current study in polymeric insulation containing voids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Noor Maizura (2015) Polyethersulfone/cloisite 15A mixed matrx membranes for gas separation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Kwon Chong (2015) Porosity architecture in ecological design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shika, Suleiman Aliyu (2015) Post occupancy evaluation for sustainability assessment framework of retrofitting commercial office building. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Hamid, Noraziah (2015) Potensi pembangunan tanah wakaf melalui sumbangan tanggungjawab sosial korporat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Muhammad Iqbal, Muhammad Iqbal (2015) The potential of design and build procurement method implementation in the directorate of enviromental sanitation development Indonesia. Masters thesis, Universiti Teknologi Malaysia.

Kakar, Faridullah (2015) Power quality improvement by dynamic voltage restorer and unified power quality conditioner using fuzzy logic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Pazheri, Faisal Rahiman (2015) Power system scheduling in presence of renewable energy and energy storage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdull Rani, Siti Nurhidayah Naqiah (2015) Prediction of free fatty acid in crude palm oil using near infrared spectroscopy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Munir, Yasin (2015) Predictors and outcome of organizational cynicism and the moderated mediating effect of perceived organizational support among nurses in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Munir, Yasin (2015) Predictors and outcome of organizational cynicism and themoderated mediating effect of perceived organizational support among nurses in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Bagaber, Salem Salah Abdullah (2015) Preliminary study on bricks drying process using microwave technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suradi, Nur Liyana (2015) Preparation and characterisation of kenaf bast fibre reinforced recycled polypropylene/recycled polyamide 6 composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ting, Teo Ming (2015) Preparation and characterization of radiation grafted fibrous adsorbent containing N-methyl-D-glucamine for boron removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Aziz, Farhana (2015) Preparation and characterization of ternary blend polymer solar cells using solvent and thermal annealing treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Aziz, Farhana (2015) Preparation and characterization of ternary blend polymer solar cells using solvent and thermal annealing treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohd. Alias, Adib Zulhilmi (2015) Pressure drop prediction for stratified oil-water flow in horizontal pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunos, Mohammad Harith (2015) The prevailing practice in deciding the practical completion of construction work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Husain, Affandi (2015) Printed document forgery detection using text reordering and mixing of matrices in zero watermarking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sheikh Ali, Sheikh Imranudin (2015) Probiotic microbe activity for application as anti- fungal and feed intake rate of ruminants. Masters thesis, Universiti Teknologi Malaysia.

Senawi, Shahrizan (2015) Problems and implication in water supply management system in Kedah. Masters thesis, Universiti Teknologi Malaysia.

Mutia, Reiza (2015) Production and characterisation of cocoa butter equivalent from formulated hard palm oil midfraction and canola oil blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Leong, Pei Pei (2015) Production and optimization of indole-3-actic acid by rhodopseudomonas palustris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ishak, Amir Fuhaira (2015) Production of selenium enriched saccharomyces boulardii in pilot scale bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Siwayanan, Parthiban (2015) Production, characterization and pre-commercialization of laundry detergent powders incorporated with palm C16 methyl ester sulphonates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Ong, Leng Hui (2015) Production, partial purification and characterization of amylase from sphingomonas sp. isolated from artic soil Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Parnon, Afif Aimaduddin (2015) Productivity improvements using lean practices at Japanese electrical and electronics manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Idris, Nurmawaddah (2015) Professional personality profiling for purpose of project success in Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chakim, Muhammad Luckmanul (2015) The profile of disputes in water resources projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Salau, Rasaq Bolakale (2015) Profiling of mineral contents of typical Malaysian muslim foods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, Mohd. Faizu (2015) Project management skills for new engineers in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saadan, Mohd. Zul Halmy (2015) Properties and characterization of degradable low density polyethylene/rice bran composite films. Masters thesis, Universiti Teknologi Malaysia.

Jeffry, Siti Nur Amiera (2015) Properties of asphaltic concrete AC14 containing coconut shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal, Mohd. Sazlan (2015) Proportional-integral-derivative control algorithm with delay compensation for steer-by-wire under network controlled system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Djajadi, Muhammad (2015) Proses pembelajaran berterusan dalam peningkatan kompetensi guru fizik di Makassar Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ojobo, Henry (2015) Psycho-physiological benefits of mountain landscape environment as stimulus for directed attention restoration and stress mitigation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chan, Samuel Hsin Chlen (2015) Psychological stresses among divorced professional women. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Sarvarzadeh, Seyed Koorosh (2015) Public perspective as a framework to manage urban heritage in the city of Shiraz, Iran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Siow, Gyen Win (2015) Purpose and satisfaction of foreign participants in Malaysia my second home programme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Siow, Gyen Win (2015) Purpose and satisfaction of foreign participants in Malaysia my second home programme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Real Estate.

Ismail, Natra (2015) PWM PIC16F877A dimming electronic ballast for HPS lamp. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Taib, Nur Athirah (2015) Q-switching of neodymium yttrium aluminium garnet laser via active and passive techniques. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Valipour, Alireza (2015) Quantitative risk allocation approach in public-private partnership projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Wahab, Nur Amira (2015) Radon and thoron study in areas of elevated background radiation in Palong, Segamat, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Nur Rashidah (2015) Rainfall runoff modelling using geographic information system. Masters thesis, Universiti Teknologi Malaysia.

Oyediran, Titiloye Stephen (2015) Range estimation using phase difference of arrival technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rezaei, Seyedeh Vahideh (2015) Ranking multiple intelligence of people with epilepsy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chai, Hui Chung (2015) A rasch model analysis of critical thinking problem solving test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tay, Ching En Marcus (2015) Ratiometric method for ozone absorption cross section measurement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khoshtinat Nikoo, Maryam (2015) Reactant dilution effects and reaction kinetics of methane dry reforming in dielectric barrier discharge reactor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bagheri, Arash (2015) Real coded GA for tuning of semi-active railway vehicle suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ithnin, Ahmad Muhsin (2015) Real-time water-in-diesel emulsion fuel production system for diesel electric generator. PhD thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Ismail, Ramli (2015) Recovery of head office overheads due to prolongation of time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ooi, Zing Yi (2015) Recovery of kraft lignin from pulping wastewater using emulsion liquid membrane process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Buhari, Junaidah (2015) Recovery of palladium from aqueous solution using surfactant mediated precipitation process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Jibril, Jibril Danazimi (2015) Reduce reuse recycle behavioural intention model in higher education institution accommodation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and real estate.

Daud, Mohd. Nor Siza (2015) Rehabilitating sewerage line system in congested urban area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syamsir, Hendri Novia (2015) Rekabentuk pengelog data harmonik dan suhu berbilang saluran untuk pemantauan pengubah. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Amzee Zamri, Siti Norziahidayu (2015) A relation between tudung saji weaving patterns and group theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

M., Syahruddin (2015) The relationship between bullying type, bullying effect, social support and safe school among bully victims. PhD thesis, Universiti Teknologi Malaysia.

Dong, Yao (2015) The relationship between communication practices and perception about performance within the team. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Rezaei, Ghasem (2015) Relationship between culture of excellence and organizational performance with knowledge sharing as mediating role. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabir, Mohammed Nawzad (2015) The relationship between entrepreneurship characteristics and attitude towards knowledge commercialization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Jahangiri, Mohammad (2015) The relationship between facilitative language learning and oral performance among Iranian learners. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Cheong, Chew Yee (2015) The relationship between HRD strategies, career success and employee retention. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Mohd. Rohani, Jafri (2015) Relationship between statistical process control critical success factors and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Batumalai, Kavitah (2015) The relationship between survivor syndromes and job satisfaction and employees’ performance during mergers in RHB Asset Management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Hummad, Saleha (2015) The relationship of personality and knowledge sharing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Shanmugam, Rames Kumar (2015) Reliability of safety performance indicator: compliance and effectiveness of safety programs in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yunus, Farizah (2015) Reliable multimedia transmission over wireless sensor network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Tze Ho (2015) Remote dynamically reconfigurable network processing middlebox. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sharuddin, Siti Shilatul Najwa (2015) Removal of ammonium through adsorptive coagulation- flocculation process in drinking water treatment. Masters thesis, Universiti Teknologi Malaysia.

Wirasnita, Riry (2015) Removal of bisphenol a from aqueous solution by adsorbing onto an activated carbon of the agricultural waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Nurul Sakinah (2015) Removal of dyes by silica nanoparticles with immobilized laccase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Salim, Nur Atikah (2015) Removal of phosphorus from domestic wastewater using discontinuous aerobic anoxic reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Nur Aainaa Syahirah (2015) Renewable levulinic acid production catalyzed by iron modified by zeolite and functionalized ionic liquid. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammed Salih, Haval (2015) Residential housing development in Kurdistan region government of Iraqi federal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Mohd. Shafiq (2015) Residents’ perception of community based sport tourism related activities in Sarawak. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jaafar, Fatimah Amirah (2015) Resistance reduction through air layer formation beneath a vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wai, Yin Ling (2015) Resistive humidity sensor made from palm-oil-derived graphene film. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Katiran, Norshidah (2015) Resource allocation in coordinated multipoint long term evolution – advanced networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Umar, Sarehati (2015) Response surface methodology for damage detection using frequency and mode shapes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wakawa, Usman Bukar (2015) Restorativeness of play milieu affordance in a paediatric ward in Nigerian hospital. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mustafa, Mohd. Faris (2015) Retrofitting direct sequence distillation columns using driving force method. Masters thesis, Universiti Teknologi Malaysia.

Mughal, Moazzam Ali (2015) Rheological properties of styrene-butadiene-rubber modified bitumen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adamu, Isah Abdurrahman (2015) Rhizomucor miehei lipase supported on chitosan-graphene oxide beads for the production of geraniol propionate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Adiputra, Mohamad Fariz (2015) Risk control enhancement using safety climate factors for HIRARC method in steel product industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Salleh, Mazlina (2015) Risk management procedures for physical development projects in the Ministry of Education. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Low, Wen Pei (2015) River treatment using biofilm growth on coconut and oil palm cellulosic fibres. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmoud Farouq, Murtala (2015) Road maintenance management in Kano State: case study at Kano Metropolitan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aghabababaeyan, Reza (2015) A robust against rotation attack watermarking technique based on wavelet transform. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Yeoh, Wei Cherng (2015) Robust electronic brake force distribution in hybrid electric vehicles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mousavi, Seyed Mojtaba Khorzoughi (2015) Robust watermarking for magnetic resonance images with automatic region of interest detection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Raja Shoib, Raja Shahrom Nizam Shah (2015) Rock shaft resistance of bored piles socketed into decomposed Malaysia granite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ho, Peng Han (2015) The role of customer brand engagement in Facebook fan page. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Kirmani, Syeda Shabana (2015) The role of employee motivation in the relationship between personality traits and employee job performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Al-Obeidy, Musaab Sami Yunus (2015) The role of physical and functional characteristics of nineveh street, mosul city centre, Iraq, as the sense of place. Masters thesis, Universiti Teknologi Malaysia.

Samsudin, Suraya (2015) Rooftop mapping and information system for rainwater harvesting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ahmad Fuad, Ahmad Faizal (2015) Safety assessment model of coastal passenger vessel in the perspective of life jacket compatibility. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rakidin, Faridah (2015) Safety improvement on arm forces construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Karim, Nurul Izzati (2015) Scale fees information application for mobile user. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Abba, Mustapha (2015) Screening and characterization of cellulolytic bacteria isolated from arctic soil and sediment samples. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Jahanzeb, Agha (2015) Sector analysis on determinants of capital structure and human capital among non-financial listed firms in Pakistan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Brohi, Sarfraz Nawaz (2015) Secure cloud storage model to preserve confidentiality and integrity. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Dawi Saifuddin, Munirah (2015) Sedimentation analysis at Sarawak Kanan River. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Nurul Fariha (2015) Seedless and catalyst-free growth of zinc oxide nanostructures on graphene by thermal evaporation. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Faridmehr, Iman (2015) Seismic and progressive collapse assessment of new proposed steel connection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Qotrunnada (2015) Seismic behaviour of low-ductile moment resistance frame under far field earthquake excitations considering soft-storey phenomenon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baloo, Lavania (2015) Semi-closed circulation integrated multi-trophic aquaculture treatment system using aquatic organisms as biofilters to improve shrimp effluent quality. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yamin, Ahmad Hafizal (2015) Semiactive suspension system using sky hook controller with particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunus, Azrul Azim (2015) Sequences and cubes of finite vertices of fuzzy topograpffic topological mapping. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yunus, Azrul Azim (2015) Sequences and cubes of finite vertices of fuzzy topographic topological mapping. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yahyazadeh, Sayyed Ali (2015) Service marketing mix and customer satisfaction of hotel in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Herman, Herman (2015) Service quality optimisation scheme of mobile video stream service. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Braim, Krekar Saber (2015) Settlement of strip footing on sandy soil due to eccentricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Norlizawati (2015) Shear strength parameters of improved organic soil by calcium base stabilizer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Samad, Noraini (2015) Signal interference to electroencephalogram and electrocardiogram signal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Saeidiasl, Leila (2015) Simulated electroencephalography (EEG) source localization using integrated meromorphic approximation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Teh, Khean Siang (2015) Simulation of brick masonry wall behaviour under cyclic lateral loading using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Puteh, Rosnizam (2015) Simulation of exhaust waste energy recovery potentials using electric turbo compound in a turbocharged gasoline engine. Masters thesis, Universiti Teknologi Malaysia.

Nadzif, Nor Farina (2015) Simulation of LNAPL migration and remedition at a petroleum refinery site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Arif Farhan (2015) Simulation of space charge in electric double layer capacitor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Salleh, ‘Ali Syari’Ati (2015) Simulation of the ankle foot orthoses with prevention design for pronation and supination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Mahmood, Wan Nurul Aiman (2015) Single station localised lightning locating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rasli, Fateen Nabilla (2015) Site suitability analysis of parks in Iskandar Malaysia using GIS and analytical hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mat Kiah, Missjuliana (2015) Six sigma for scrap cost reduction in remanufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ayop, Razman (2015) Sizing of energy storage based on loss of load probability of standalone photovoltaic systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sultan, Ahmad Rizal (2015) Skim kegagalan bumi unit penjana-pengubah menggunakan komponen simetri dan jelmaan wavelet-rangkaian neural buatan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Elfartas, Hesham Omran (2015) Small town community social interaction in public spaces. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ripin, Erlina (2015) Smart power saver using PID control based on PLC application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zulkifli, Nur Hidayah (2015) Social impact of volunteer tourism towards host community in Perhentian Island, Terengganu. Masters thesis, Universiti Teknologi Malaysia.

Kandar, Mohd. Za’i (2015) A social network analysis of international tourist movement patterns for green and landscape spaces in Penang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mahmud, Yuzi (2015) Social network site appropriation processes based on family types. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Sow, Ling Ling (2015) Social sustainability of urban high-rise community. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Boon Chiang (2015) Soft computing based controllers for automotive air conditioning system with variable speed compressor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mesbah, Rashid (2015) Software dynamic pricing by an optimization deterministic model with presence of piracy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Ilias (2015) Soil improvement for taxiway and apron due to soft ground problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Siti Saidatul Azween (2015) Soil moisture variation due to grass water uptake in shallow slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ruzlan, Nur Nabihah (2015) Solid phase extraction and characterization of rutin from Labisia pumila var. Alata. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Ismail, Ahmad Ramdan (2015) Solubility of swietenia mahagoni seed in supercritical carbon dioxide extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abu Bakar, Nurul Ain (2015) Solution of diffusion equation of total concentration in spherical shape drops using laplace transform. Masters thesis, Universiti Teknologi Malaysia.

Aghaeibookheili, Mohsen (2015) Solving dirichlet and neumann problems with discontinuous coefficients on bounded simply and multiply connected regions. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Amin, Muhammad Husni (2015) Some aspects in Banu Musa's philosophy of technology with special reference to their Kitab Al-Hiyal. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Ali Albshayreh, Ali Otman (2015) Spam detection in email body using hybrid of artificial neural network and evolutionary algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Baharim, Nor Bakhiah (2015) Spatial and temporal distributions of water physicochemical, sediment quality and sedimentation in Sembrong Reservoir. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Ibrahim (2015) Spatial and temporal modeling of regional groundwater level in context of climate change. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Nazirah (2015) Specific absorption rate in the presence of conductive metallic objects with close proximity radiating source. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Nur Alia Fauzia (2015) Spectroscopic studies of samarium-doped sodium tellurite glass containing silver nanoparticles. Masters thesis, Universiti Teknologi Malaysia.

Othman, Nur Fatehah (2015) Spectrum sensing prototype using software using software defined radio USRP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Oh, Eng Wei (2015) Speed enhancement on a matrix inversion hardware architecture based on Gauss-Jordan Elimination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ghani, Muhamad Fadli (2015) Stability analysis of a small scale remotely operated underwater glider. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Kadir, Norasman (2015) Stability analysis of fill slope at Sekolah Menengah Kebangsaan Song no.2's project using SLOPE/W. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shittu, Umar (2015) Statistical analysis of human tuberculosis microarray gene expression data in the bioconductor R package. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abdul Kadir, Nur Fasihah (2015) Statistical byte frequency analysis for identifying JPEG file segments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Wongso, Jonny (2015) Strategi pemeliharaan bandar pusaka berdasarkan kebijaksanaan tempatan Minangkabau. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Amechi, Uti Charles (2015) Strategic partner role as mediator in the relationship between human resource competencies and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ahamad, Abdul Hadi (2015) Strategies to enhance application of SIRIM eco-label products in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yong, Pei Chei (2015) Stray cats management in Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ngo, Wai Loon (2015) Stream processor architecture – streaming memory system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Fauzi, Nurihan (2015) Strength characterisation of shale using Mohr-Coulomb and Hoek-Brown criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Teck Jung (2015) Strength properties of 10 mm timber clinker aggregate concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Nurulfarhana (2015) Structural analysis of platelet-derived growth factor receptor alpha by protein homology modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Peh, Ly Tat (2015) Structural and electrical conductivity measurement of zinc oxide thin film prepared by sol-gel dip coating method. Masters thesis, Universiti Teknologi Malaysia.

Pang, Xie Guan (2015) Structural and luminescence properties of antimony, lead, bismuth zinc borophosphate glasses doped iron and titanium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Nizar, Nurfarahin (2015) Structural and luminescence properties of barium orthosilicate doped with europium and samarium ions. Masters thesis, Universiti Teknologi Malaysia, Faculty of science.

Leong, Pau Ming (2015) Structural and luminescence properties of europium oxide and dysprosium oxide codoped strontium borophosphate ceramics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bohari, Nur Zu Ira (2015) Structural and luminescence properties of magnesium boro-tellurite doped europium and dysprosium ion ceramic. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Subari, Noor Fariza (2015) Structural and optical properties of carbon nanowalls by plasma-enhanced chemical vapor deposition method. Masters thesis, Universiti Teknologi Malaysia.

Ong, Wai Kit (2015) Structural and optical properties of diamond like carbon films using direct current plasma enhanced chemical vapor deposition. Masters thesis, Universiti Teknologi Malaysia.

Zainal Abidin Sham, Nurul Wahidah (2015) The structural and optical properties of neodymium doped lithium niobate and yttrium aluminum garnet single crystals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Leow, Ting Qiao (2015) Structural and optical properties of pekovite and maleevite phosphor for white led applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan, Ming Hua (2015) Structural and optical properties of undoped and manganese doped calcium zinc borophosphate glasses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abd. Mutalib, Muhazri (2015) Structural characteristics of pore former assisted cathode layer in micro-tubular solid oxide fuel cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Tan, Sie Ting (2015) Structural optimisation approach and indicators for integrated municipal solid waste management. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Eltwati, Ahmed Salama (2015) Structural performance of asphalt blocks pavement as related to thickness, binder types, and joint width. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad Lawan, Mustapha (2015) Structural performance of cold-formed steel with self-compacting concrete in a composite beam system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jailani, Noor Atiqah (2015) Structure characterization and surface morphology of low sintering temperature synthesized calcium titanate ceramics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jagarajan, Rehmaashini (2015) A structured critical success factors model for the implementation of green retrofit projects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Linggu, Jacquelin S. (2015) Students’ self-regulation and critical thinking in learning e-commerce through social networking site. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Suhaim, Noorhamizah (2015) Studies on the effect of different bioprocess parameters on pectinase production by aspergillus niger. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamad Sahini, Mohd. Nawawi (2015) A study and analysis of cooking oil quality determiner based on planar electromagnetic sensor array. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nik Abd. Malik, Nik Nawwar Nadia (2015) Study of capacitated vehicle routing problem based on particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia.

Abdullah, Haryani (2015) The study of controlled release propagating substrate (CRPS) and NPK-Organo-Zeolite on the growth of Clinacanthus Nutans. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Tan, Lay Yen (2015) A study of generation Y travel behaviour in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Madahi, Abdolrazagh (2015) A study of Malaysian consumers’ channel switching behavior using an extended decomposed theory of planned behavior. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mak, Kam Wong (2015) Study of micro pits on billet experimental surface in extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamar, Adeebah (2015) A study of network characteristics in diffusion-based molecular communication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Bakri, Nur Azimah (2015) A study of the relationship between cognitive diversity and decision making outcomes, and the role of task conflict as the moderator of the relationship. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abu Bakar, Khairul Asraf (2015) The study of training needs analysis (TNA) practice in manufacturing companies in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Ali, Faizan (2015) A study on holistic customer experience in China’s related hotel and resorts. PhD thesis, Universiti Teknologi Malaysia, International Business School.

Mohd. Ali, Mohd. Hafiz (2015) Study on the influence of head of project team role throughout JKR project life cycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsubaha, Muhammad Fauzi (2015) Study on the performance of biodiesel blend Jathropa oil in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Salleh, Mohd. Naqiuddin (2015) Study on the performance of envo diesel in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Musthafa, Anas Basri (2015) Study on the performance of palm methyl ester in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Govindasamy, Yuvabalan (2015) A study to enhance risk management practice in Jabatan Kerja Raya projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ong, Chi Siang (2015) Submerged membrane photocatalytic reactor using polyvinylidene fluoride-polyvinylpyrrolidonetitanium dioxide for oily wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Danlami, Jibrin Mohammed (2015) Supercritical carbon dioxide extraction of castor oil seed. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yasak, Mohd. Fuad (2015) Sustainable assessment in manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Izni Husna (2015) Switchable and tunable multiband slot dipole antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Musa, Mohammed Salisu (2015) Synthesis and application of microporous carbon spheres for solid phase membrane tip extraction of nitrosamines from water samples. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

A. Ati, Ali (2015) Synthesis and characterization of cobalt based ferrite. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hanifah, Mohamad Fahrul Radzi (2015) Synthesis and characterization of graphene nanosheets supported platinum nanocomposite as catalyst for methanol oxidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Sohaimi, Khairunissa Syairah (2015) Synthesis and characterization of textile sludge biochar for oil adsorption. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Saadon, Nurafiqah (2015) Synthesis and characterization of zinc porphyrin complex heterogenized in functionalized sba-15 for liquid phase epoxidation of limonene. Masters thesis, Universiti Teknologi Malaysia.

Saadon, Nurafiqah (2015) Synthesis and characterization of zinc porphyrin complex heterogenized in functionalized SBA-15 for liquid phase epoxidation of limosine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sabran, Nurul Husna (2015) Synthesis and luminescent properties of bimetallic gold(I) and silver(I) pyrazolate complexes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Karim, Ainul Hakimah (2015) Synthesis of carbon nanotubes-mesostructured silica nanoparticles composites for adsorption of methylene blue. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Suk Ming (2015) Synthesis of heterocyclic chalcones and their novel pyrazoline derivatives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamidon, Nurul Hanisah (2015) Synthesis, characterization and antibacterial activity of colloidal silver nanoparticles encapsulated in low generation poly(amido)amine dendrimers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Baharvand, Afrouz (2015) Synthesis, characterization and application of hollow titania microspheres containing silver and gold nanoparticles in the photodegradation of pesticides. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hassan, Nur Hafizah (2015) Synthesis, characterization and catalytic activity of palladium(ii) aroylhydrazone complexes in mizoroki-heck reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Johari, Khairiraihanna (2015) Synthesis, characterization and performance of adsorbents for mercury vapor removal. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chegeni, Ali (2015) A system dynamic model for decision support system in lean construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Aziz, Nurul Hazirah (2015) System identification and control of the horizontal motion of a twin rotor multi-input multi-output system (TRMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Mohd. Firdaus (2015) System identification and intelligent control of automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Sadeq, Taha Mohammed (2015) System identification and position control of pneumatic actuator using embedded system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Lazim, Noor Hanis Izzuddin (2015) System identification model and predictive functional control of an electro-hydraulic actuator system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Awang, Nor Fauzana (2015) Tabu search method for solving multiobjective job shop scheduling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kassim, Nor Akashah (2015) Tahap keberkesanan media interpretasi personal dan grafik di Taman Negara Tanjung Piai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd. Razif, Farhana (2015) Tahap penerimaan semasa pengguna terhadap penebat haba bumbung rumah teres di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hasan, Hasan (2015) Teacher professionalism and professional development practices in South Sulawesi Indonesia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Bandarrigi, Amir Ahmad Yahyazadeh (2015) Techno-economic evaluation of off-grid renewable energy for a remote area electrification in Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Attaran, Seyed Ahmad (2015) Tensile, barrier, and degradation properties of low density polyethylene/epoxidized natural rubber nanocomposite films. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shikh Zadeh, Khadija Morad (2015) Tensile, thermal and flammability properties of date palm fiber filled recycled ternary blends and composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sanusi, Intan Safina (2015) Termination procedures of projects by the public works department (PWD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

As’Sahra, Nur Fatimah (2015) Test case prioritization technique using sequence diagram and labeled transition systems in regression testing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zainol, Zuraida (2015) Testing of metal oxide surge arrester monitoring (MOSAM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sim, Wan Jie (2015) The theoretical development of opacity entrepreneurship in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Abubakar, Abubakar Kamal (2015) Thermal and area optimization for component placement on PCB design using inverse genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Vahedi, Abdolhamid (2015) Thermal and mechanical properties of prepacked concrete containing palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zalani, Rahmah (2015) Thermal behaviour of mixed blended ashes aerated concrete. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

Zahmatkesh, Farshad (2015) Thermal performance of axially restrained steel beams with slant end-plate connections. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suhiri, Farahdatul Sahuda (2015) Thermodynamic cycle analysis of Pulse Detonation Engine (PDE) by biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Kar Chun (2015) Thin film nanocomposite membrane incorporated with polymethyl metharcylate grafted multi-walled carbon nanotubes for gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Raja Mohd. Yazit, Raja Nur Syaheeza (2015) 'Third place' environment in residential school design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Hussain, Nor Hayati (2015) Thoughts on Malaysian architecture identity and design principles of Malayan architects co-partnership. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Goh, Kam Meng (2015) Three dimensional information estimation and tracking for moving objects detection using two cameras framework. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Nur Sabrina (2015) Three-dimensional model database for space utilization and planning using terrestrial laser scanner data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Loo, Khee Hui (2015) Timber clinker as partial replacement of 20mm natural coarse aggregate in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salimi, Behnam (2015) Time difference of arrival-based three-station lightning locating system in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Idris, Nur Aini (2015) Tindakan pihak berkuasa negeri dan pihak berkuasa tempatan terhadap kes pelanggaran syarat guna tanah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mohamed, Mohamad Azuwa (2015) Titanium dioxide nanorods in regenerated cellulose membrane for photocatalytic degradation of phenol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Ramli, Mohd. Khairul Naim (2015) Tomographic instrumentation system based on ultrasonic sensor for monitoring irregularities in pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Mohammad Ali, Ashraf Alzubir (2015) Topology preservation and control approach for interference aware non-overlapping channel assignment in wireless mesh networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Zakaria, Nooraini (2015) Total phenolic content of polygonum minus, centella asiatica, cosmos caudatus and allium sativum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Sivaraj, Pushpalatha (2015) Total phenolic content, antioxidant and cytotoxic activities of citrus hystrix leaf extracts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Bakri, Adnan (2015) Total productive maintenance framework for automotive companies in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mt. Radzi, Rosmariati (2015) Tourists’ preferences and satisfaction towards Mersing as a gateway to Johor islands. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Adam, Sami Abbas Nagar (2015) Traffic matrix estimation with enhanced origin destination generator algorithm using simulation of real network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chong, Tin Fook (2015) Transaction-based industrial real estate price indices for Iskandar Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Puad, Khalidah (2015) Transesterification of croton megalocarpus oil over tungsten trioxide loaded on silica mesoporous-macroparticles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Thian Lim, Gary Soh (2015) Transformer performance model under power quality environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Al Gizi, Abdullah Jubair Halboos (2015) Transient voltage stability enhancement using genetic neural proportional integral derivative fine-tuned by fuzzy controller. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamzah, Norhilawati (2015) Treatment of starch-processing wastewater in sequencing batch reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Abd. Wahab, Muhammad Syimir (2015) Trend of parking demand at Machap Northbound Rest Area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roustasekehravani, Alireza (2015) Trust, commitment and satisfaction in the relationship between brand loyalty and satisfaction in the mobile phone industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Bamiah, Mervat Adib (2015) Trusted cloud computing framework in critical industrial application. PhD thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Kumarasamy, Inbanathan (2015) Tugas-tugas utama pengurusan harta pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformatiom and Real Estate.

Armaghani, Danial Jahed (2015) Tunnel boring machine performance prediction in tropically weathered granite through empirical and computational methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Mohd. Hakimi (2015) Two dimensional direct current resistivity mapping for subsurface investigation using computational intlligence techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hatami, Somaieh (2015) Ultimate behaviour of reinforced concrete shear walls with octagonal openings. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lazim, Zulfaqih (2015) Ultimate strength analysis of ships plate due to corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adam, Ahmad 'Akif (2015) Ultrasonic instrumentation system for detecting liquefied petroleum gas level in 14 kilogram cylinders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Petroleum and Renewable Energy Engineering.

Tan, Sui Hong (2015) Understanding women managers’ competence acquisition. PhD thesis, Universiti Teknologi Malaysia, Faculty of Management.

Lim, Jee Wen (2015) Undrained shear strength of overconsolidated cohesive soil using modified rowe cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Borhannuddin, Muhammad Syafiq (2015) Ungku Aziz's ideas on development. Masters thesis, Universiti Teknologi Malaysia, School of Graduate Studies.

M. Nemer, Tareq H. (2015) Use of estidama rating tool to assess existing building in hot dry climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Miron, Nurfatin Aqeela (2015) Utilization of coconut shell as fine aggregate in asphaltic concrete AC14. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Khalid, Mohd. Afiq (2015) Utilizing Managed Pressure Drilling (MPD) technology to mitigate drilling problems in HPHT exploration wells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Chemical & Energy Engineering.

Rahmatyo, Bayu Dwi (2015) Variation in the standard form of contract in Malaysia and Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Rahmatyo, Bayu Dwi (2015) Variation in the standard from of contract in Malaysia and Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Anah, Syafwan (2015) Vessel traffic simulation at container port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahman, Md. Habibur (2015) Vibrating nanoneedle and lab-on-chip microfluidics system for single cell mechanics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed Aris, Khairani (2015) Virtual team challenges towards project success in IT projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Civil Engineering.

Ishak, Mohd. Hafiz (2015) Voltage stability enhancement in distribution networks with distributed generations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Morni, Azy Yanti (2015) Walkability as key strategy in improving weld quay legibility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Abdul Aziz, Wan Aminullah (2015) Wave height and wave energy mapping in Malaysian seas using satellite altimetry data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Mutalib, Norhayati (2015) Wearable embroidered antenna design for body worn application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jalil, Noraini (2015) A web-based teleprenatology platform for antenatal care management in remote areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Kootiani, Reza Cheraghi (2015) Wellbore pressure prediction after pipe connection operation in underbalanced drilling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Nasidi Ibrahim (2015) Wideband band-notched antenna using electromagnetic band-gap structure with dual 5G bands. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sabri, Muataz Watheq Sabri (2015) Wideband coupler for butler matrix antenna beamforming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Memon, Mehran (2015) Wireless power transfer in near-field communication using a current-controlled multi loops with a loaded capacitance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Noh, Izyan Nadzirah (2015) Women empowerment in organizing homestay program case study: Homestay Sinaran Baru, Senai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azman, Famizah Asyikin (2015) Work-to-life conflict and job stress among nurses at Hospital Enche' Besar Hajjah Kalsom, Kluang, Johor : examining the role of social support as moderator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Azman, Famizah Asyikin (2015) Work-to-life conflict and job stress among nurses at Hospital Enche' Besar Hajjah Kalsom, Kluang, Johor: examining the role of social support as moderator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Shahraki, Shahrokh (2015) Workforce fatigue model and its relationship with workforce productivity. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lau, Pik Suan (2015) Wound healing in diabetic rat by 808 NM laser diode. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.