Browse by Type

Jolyn, Soo (2005) 3D laser scanning system for hull form surface reconstruction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Azra Ayue (2005) Academician profile system for developing an ICT academic community. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Misran, Suhaimi (2005) The adaptation of ISO 9126 and ISO 17799 standard for evaluation of Golden Hope Estate Computer System 4 (GH-ECS4)-oil palm and payroll module for Golden Hope Internal Audit Department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Paraman, Norlina (2005) Address book builder for network monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chen, Weng Cheow (2005) An admission control method for IEEE 802.11e contention access mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Noor Maizura (2005) Adsorption characteristics of protein on zeolite adsorbent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ismail, Nurul Adzura (2005) Aggregation simulation model of flow and rainfall series. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarudin, Kamarul-Azhar (2005) Air staging combustion and emission from oil burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Amelia Ritahani (2005) Alternative negative selection framework of artificial immune system for classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohemad, Rosmayati (2005) Analisa pengelompokan pangkalan data kimia menggunakan teknik algoritma genetik (GA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yacob, Azliza (2005) Analisa sistem sukatan (MSA) dalam industri automotif menggunakan kaedah GR & R. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ahmad, Anuar (2005) Analisis ke atas prestasi kamera digital kompak untuk aplikasi fotogrametri jarak dekat. PhD thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Purwanto, Hery (2005) Analisis pasang surut dengan kaedah harmonik menggunakan pelarasan kuasa dua terkecil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Fauzi, Ira Fazlin (2005) Analisis perletakan kemudahan pendidikan menggunakan sistem maklumat geografi (GIS) : kajian kes : Wilayah Persekutuan Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Rahim, Shayfull Zamree (2005) Analyses of material flow in two and three - plate molds for mold design selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahyat, Abdul Kadir (2005) Analysis and design of hammerhead bridge pier using a strut and tie method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suhaimi, Azrina (2005) An analysis of fuzzy clustering algortihms for suggestion of supervisor and examiner of thesis title. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Nasir, Nurul Nisa (2005) An analysis of hierarchical clustering and neural network clustering for suggestion supervisors and examiners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Gouda Mahfouz, Hamdy Abd. El Rahman (2005) Analytical and experimental analysis on scroll compressor for automobile air conditioning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramasundram, Shemalah (2005) Analytical application of functionalized CdS and ZnS as fluorescence label for the determination of proteins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Negara Shuib, Suhardi Perwira (2005) Aplikasi GIS dan pendekatan analisis multi-kriteria dalam penilaian dan pemilihan lokasi tapak pelupusan sisa pepejal : kajian kes : Daerah Jempol, Negeri Sembilan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ting, Kee San (2005) Aplikasi pengurusan fasiliti dalam pengurusan hotel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Andalas, Ronny (2005) Application of accuracy control system in Batam shipyard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chen, Wah Sit (2005) Application of artificial neural network genetic algorithm in inferential estimation and control of a distillation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kuan, Chow Sheng (2005) The application of E-real estate websites in providing property information. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohmad Jaat, Md. Norrizam (2005) The application of exergy analysis on an educational steam power plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Memon, Irfan Ali (2005) Application of geographic information system in transportation for road network analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Era Triana, Era Triana (2005) The application of market appeal-robusticity matrix as a tool for cultural heritage and tourism management (case study : Melaka historic city). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

A. Jalil @ Zainuddin, Mohd. Hafiz (2005) Application of microwave in wood tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nge, Chee Lim (2005) Application of natural commutation technique to an improved cycloconverter type high-frequency link inverter with center-tapped transformer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Rahim, Siti Mazlinah (2005) The application of precast concrete technology in industrialised building system (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Hock Weng (2005) Application of real time optimisation for fatty acid fractionation process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Khamis, Azme (2005) Application of statistical and neural network model for oil palm yield study. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hamzah, Halim Shah (2005) Application of statistical process control (SPC) to the production system of an automotive manufacturing plant's welding shop in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahar, Arifah (2005) Application of stochastic differential equations and stochastic delay differential equations in population dynamics. PhD thesis, University of Strathclyde, Department of Statistics and Modelling Science.

Md. Ghazaly, Mariam (2005) Application of virtual instrumentation in position control system using direct digital control via PID and fuzzy logic controller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wong, Jing Tyng (2005) Applications of preconcentration methods prior to analysis of copper and lead in a chinese herbal medicine using atomic absorption spectrometry (AAS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Morshidah Yazid (2005) The art of organizational process focus (OPF) and organizational process definition (OPD) process areas in capability maturity model integration (CMMI) in Heitech Padu Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Isha, Ruzinah (2005) Artificial neural networks application in combined carbon dioxide reforming and partial oxidation of methane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Selamat, Hilmilia (2005) Aspek keselamatan jalan dan kemudahan pejalan kaki di dalam pusat bandar dari perspektif wanita : kajian kes : Jalan Tuanku Abdul Rahman, Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Te, Shu Harn (2005) Assessment of longitudinal dispersion in QUAL2E and its application for Sungai Tebrau. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

W. Ibrahim, Wan Hanisah (2005) Assessment of occupational safety and health management system based on OHSAS 18001. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ulaganathen, Kesavan (2005) Attenuation measurement on cyclotene (BCB photo resin) polymer based slab waveguide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahmi, Depriwana (2005) Bayesian estimation of reliability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ngui, Yeang Lin (2005) Behavior of beam-to-column connection in precast concrete structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Yaacob, Mohd. Muhridza (2005) The behaviour and performance of metal oxide varistor under the application of multiple lightning impulses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Amer, Yusuff (2005) Behaviour of high strength reinforced concrete beam with metakaolin under static loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Ming Kai (2005) The behaviour of pinned beam-to-column connection in precast concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ling, Tieng Kooi (2005) Behaviour of precast concrete beam-to-column connection with hidden corbel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abu Bakar, Mohd. Azmir (2005) Behaviour of reinforced concrete frame at ultimate limit state. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kong, Chak Hing (2005) The behaviour of shear walls in global skeletal frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

A. Hamid, Rahayu (2005) Bioactivity classification of anti aids compounds using neural network and and support vector machine : a comparison. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lim, Boon Han (2005) Biometric signature verification using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Esa, Mona Riza (2005) Bit error rate for private mobile radio (PMR) due to lightning electromagnetic field radiation (LEMR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahpol, Khairil Asmani (2005) Box-jenkins and genetic algorithm hybrid model for electricity forecasting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, Cher Siang (2005) Buckling analysis of compression member with trapezoidal web profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ku Ahmad Ezham, Ku Azril Ridzhie (2005) Cadangan rekabentuk rangkakerja bagi pemilihan kontraktor binaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah @ Mohd. Asmoni, Mat Naim (2005) A case study on quality management system in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Nurul Hidayati (2005) A case study on the management of UTM new hostel based on design and build arrangement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Poh Huat (2005) Case study to determine the camber of post- tensioned 'I' beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siregar, Tirena Bahnur (2005) Catalytc cracking of palm oil to gasoline using zeolite catalysts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Koh, Cheo Poh (2005) The causes of construction dispute on client organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tang, Min Keen (2005) Channel modeling and bit error rate performance simulation for fixed broadband wireless access system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sanudin, Rahmat (2005) Characterisation of ballistic carbon nanotube field-effect transistor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lau, Chen Chen (2005) Characterization of amorphous silicon-carbon alloy films (a-Si:C:H). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ibrahim, Zuhairi (2005) Characterization study of platinum-doped stannic oxide ceramics for methane sensing in air. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Chua, Lee Suan (2005) Chiral resolution of (R,S)-1-phenylethanol using immobilized lipases in batch stirred tank and recirculated packed bed reactors. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Faizal, Adly Farriz (2005) Ciri-ciri antena bowtie. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Khokhar, Arashid Hafeez (2005) Classification of stock market index based on predictive fuzzy decision tree. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kiew, Leh Yieng (2005) CliqCoNet : a visual simulation model for partitioning nodes in static ad hoc networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Huspi, Sharin Hazlin (2005) Cluster-based compound selection using fuzzy clustering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Hashim, Mohd. Hisbany (2005) Coconut fiber reinforced wall panelling system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Syed Abdul Karim Jamalullail, Syed Faizal (2005) Collaboration and knowledge sharing among UTM's institution of fellow's development : promoting knowledge management solution as a medium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Cheung, Lester Ted Kong (2005) Compact 8x8 butler matrix for ISM band. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Dahlan, Samsul Haimi (2005) Compact microwave hairpin line band pass filter using folded quarter-wave resonator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Seng Boon (2005) A comparative study of technology firms in Tsukuba Science City, Japan and Kulim Hi-Tech Park, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tea, Swee Sin (2005) A comparative study on the jet loop reactor and continuos stirred tank reactor in the selective hydrogenation of palm olein (I.V.64). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

S. Hamid, Bilal (2005) A comparison between finite element analysis code and cosmos software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shamsuddin, Siti Mazzuana (2005) A comparison between traditional pavement rehabilitation method as compared to recycling method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Ahmad Kamal, Wan Ikram Wajdee (2005) Comparison of bridge design in Malaysia between American codes and British codes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Looi, Yat Seong (2005) Comparison of fluidised bed and spouted bed for the combustion of rice husk. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Satari, Siti Zanariah (2005) Comparison of multiple outliers detection procedures using least squares and robust estimators (LMS and LTS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Godfrey, Willa Welmina P. (2005) Comparison of the effectiveness of probability model with vector space model for compound similarity searching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abu Talib, Zaihasra (2005) Compressibilty and Young's modulus of filled joint. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kathanathan, Vijaynathan (2005) Computer assisted optimisation method for Malaysian fishing boats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Jaya, Abdul Syukor (2005) Computer based training for computer numerical control turning process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saud, Muhammad Sukri (2005) Computer technology competencies perceived as needed by vocational and technical teachers in Malaysia. PhD thesis, The Ohio State University, Faculty of Industrial/Technology Education.

Mohammed Osman Saleh Bilal, Sara (2005) A computer vision system for the classification of moving object. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Shaffiar, Norhashimah (2005) Computer-aided garment pattern making-3D enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Law, Jeng Yih (2005) The concentration of sodium salicylate and conversion of sodium salicylate to salicylic acid using electrodialysis membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kumar, Madanagopal Vijaya (2005) Conductivity measurement 4 cell. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Idris, Mukram (2005) Conservation management practice for the Malaysia Heritage Trust (Badan Warisan Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Choo, Tzer Ching (2005) Construction client attributes in affecting the project performance in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yap, Sem Foh (2005) Construction labour productivity issues encountered by Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yeap, Chu Im (2005) Construction partnering : legal and contractual issue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ali, Rubiatun Adawiah (2005) Construction productivity : issues encountered by contractors in Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohsan, Nor Maslina (2005) The creep behaviour of normal strength concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mazri, Irma Azreen (2005) Critical success factors for the construction organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Romli, Awanis (2005) CSG tree : evaluation on performance between solid modelers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ashaari, Zuriati (2005) Current practice of post occupancy evaluation in facility management organization of Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ainal, Sargunan (2005) Data acquisition using USB port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sairi, Masniza (2005) The deacidification of pineapple juice using electrodialysis with monopolar ion exchange membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Zin, Nur Shaylinda (2005) Decolourisation of dye solution containing azo acid orange 7 by electricity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hilmi, Ahmad Humaizi (2005) Design and analysis of a paintball marker using boothroyd - dewhurst DFMA methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Yusof, Mohd. Rozni (2005) The design and construction of a computerised magnetic flux leakage system for electromagnetic inspection of ferromagnetic specimens. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Azizi Abdul Rakman (2005) Design and development of INTEL mechanics application (iMeeApp). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Mohideen Batcha, Mohd. Faizal (2005) Design and development of new multi-vane rotary compressor for automobile air-conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Taib, Mohd. Yusof (2005) Design and development of rotating-sleeve refrigerant compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Toh, Show Chong (2005) Design and formulating silane crosslinkable extrusion blow molded high density polythylene compound. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohamed Sidek, Zailani (2005) Design and implementation of a new multilevel security scheme for database management systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kadiran, Kamaru Adzha (2005) Design and implementation of OFDM transmitter and receiver on FPGA hardware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Yun Hau (2005) Design and tailoring of a novel heterogeneous catalyst for epoxidation of 1-octene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, Neza (2005) Design considerations, practices and problems : a survey of private consultant firm perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harith, Zuraidah (2005) Design of a circular polarization microstrip antenna at 2.4Ghz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Ghafar, Nurulrodziah (2005) Design of a compact microstrip antenna at 2.4GHZ. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Paras Ram, Anoop Sehgal (2005) Design of a recognition system for special Malaysian car plates using stroke analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Danapalasingam, Kumeresan A. (2005) Design of a simulator for elevator supevisory group controller using ordinal structure fuzzy reasoning with context adaptation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lew, Eileen Yi Lee (2005) Design of an intelligent wood recognition system for the classification of tropical wood species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamdan, Fakhrul Radzy (2005) Design of efficient implementation of II/4 DQPSK modulation for multipath fading channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yuen, Yoon Ming (2005) Design of single layer interdigital band pass filter with elliptical response. Masters thesis, Universiti Teknologi Malaysia,Faculty of Electrical Engineering.

Hassan, Siti Hafizan (2005) Design phase constructability concepts in highway projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ahnuar, Neza (2005) Designers' liability for variation order. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ng, Pui Ling (2005) Determination of optimum concentration of lime solution for soil stabilization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Rashid, Ahmad Safuan (2005) Determination of plastic limit of soil using modified cone penetration method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Yee Yun (2005) Determination of water in oil emulsion using indirect colorimetric measurement of dyes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kiew, Siaw Juie (2005) The development and assessment of organobentonite composite materials for use in the removal of organochlorine pesticides in water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Alias, Asmawati@Fatin Najihah (2005) Development and characterized of microcontroller based xenon flashlamp driver circuit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lau, Ker Chea (2005) Development and performance study of a proactive network-based intrusion detection system (NIDS) based on Kohonen's self-organizing map (KSOM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lum, Karen (2005) The development and use of GIS database for the study of migratory birds in Kuala Gula National Park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Latif, Abdul Maulud (2005) The development of a business framework and techno-financial model for biomass power plants. PhD thesis, Universiti Teknologi Malaysia, Business and Advanced Technology Centre.

Ramasamy, Devarajan (2005) Development of a compressed natural gas (CNG) mixer for a two stroke internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering : Mechanical.

Ooi, Boon Lee (2005) Development of a computer software for optimal design and retrofit of heat exchanger network in a chemical process plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohammad, Izran Sarrazin (2005) The development of a for Pejabat Harta Bina, Universiti Teknologi Malaysia : a study for the guidelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohammad, Izran Sarrazin (2005) The development of a landscape management system for Pejabat Harta Bina, Universiti Teknologi Malaysia : a study for the guidelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Gan, Leong Ming (2005) The development of a new blower assisted scavenging system for two stroke petrol engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cheok, Hou Seng (2005) Development of a pc-based tank model real-time flood forecasting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noviyarsi, Noviyarsi (2005) Development of a proposed quality engineering (QE) implementation framework for Malaysian automotive suppliers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heng, Han Yann (2005) Development of a rule-based fault diagnostic advisory system for precut fractionation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Azahari, Nor Aziawati (2005) Development of a water cooling system for Nd:YAG Laser Chamber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mugeneswaran Shanmugam, S. (2005) Development of activity - based costing (ABC) model in demanufacture cost assesments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Mohamad Rizza (2005) Development of advisory fault detection and diagnosis system using knowledge based and artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Thian, Lee Eng (2005) Development of an optical pulsing by using pockels effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sa'ude, Nasuha (2005) Development of computer aided reprocessability index (CARPI) system for rotational parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Supramani, Thayalan (2005) Development of computerised maintenance management system (CMMS) for ready mix concrete plant production facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Then, Dennis Choo Khun (2005) Development of contractor's proposal process model in design-build procurement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subhashini A/P Apana @ Apana Narayanan (2005) Development of ERD and data dictionary for reporting (ER3DR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Cheow, Kwee Siong (2005) Development of gate oxide short (GOS) model for deep submicron CMOS transistor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmed Mohamed, Mahmoud Ali (2005) Development of hybrid skinning surface method for ship hull design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Appalanidu, Kiran Babu (2005) Development of low emission oil burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azaliza Zainal (2005) Development of mediline,mix and medifile integration system (medibase) for PMCARE Sdn Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Jusoh @ Tajudin, Mohd. Taufik (2005) Development of MPLS test-bed for network traffic engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Yin Ling (2005) Development of new systematic techniques for retrofit of water network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

M. Rahuma, Fouzi Khalifa (2005) Development of ocean current turbine for power generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Neni Frimayanti, Neni Frimayanti (2005) Development of QSAR models for predicting biological activity of chemical compounds from natural products and its application in database mining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad, Rozie Nani (2005) Development of spreadsheet analysis (SAS) for DFA house methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Faizul Mustapha (2005) The development of surface mount technology data automation (SMTDA 1.0). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ng, Wei Nyap (2005) Development of ultrasonic tomography for composition determination of water and oil flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mokhtar Rudin, Haira Rizan (2005) Differential scanning calorimety (DSC) studies on two zingiber species. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Leong, Mun Hon (2005) Digital modelling test technique for mixed mode circuits. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Jamaluddin, Mohd. Haizal (2005) Direct conversion receiver for active integrated antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mahyuddin, Muhammad Nasiruddin (2005) Direct model reference adaptive control of coupled tank liquid level control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Zool Hilmi (2005) Direct torque control of induction motor drives using space vector modulation (DTC-SVM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ibrahim, Abdul Kudus (2005) Directory publishing software (NXAPEX). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abd. Hamid, Mohd. Hanifa K. (2005) Diskrepansi nilaian pampasan tanah untuk maksud awam : kajian kes : pengambilan tanah untuk tapak kampus Kolej Universiti Teknikal Kebangsaan Malaysia, Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chu, Hui Chen (2005) Dispute resolution : a comparative study of dispute review board and arbitration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohd., Rosliza (2005) Document management system for development control process to support decision making in local government. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Sitti Asmah (2005) Driver's overtaking behavior on single carriageway road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ammasi, Sriraj (2005) Dual bed catalytic reactor system for direct conversion of methane to liquid hydrocarbons. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ishak, Mohamad Hafis Izran (2005) Dynamic modelling of a two-link flexible manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Nordin, Syarifah Zyurina (2005) DyTAS : discrete event simulation model for dynamic task scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Zahariman, Nur Amalina (2005) E-event planner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lam, Yuen Siong (2005) Earthwork activities in private housing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelraheem Elhaj, Hazir Farouk (2005) Effect of adopting different dispatching rules on the mean flow time in a two machine batch-shop problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Irwan Ibrahim, Mohd. Halim (2005) The effect of buckling in frp members. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yaacob, Nurshahnawal (2005) Effect of CO2-induced platicization and membrane configuration on the performance of asymmetric polysulfone hollow fiber membrane for CO2/CH4 gas separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kormin, Faridah (2005) The effect of coating condition and aqueous phase composition on the performance of thin film composite reverse osmosis flat sheet membranes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Ali, Ahmad Zurisman (2005) The effect of eccentricity at beam support to beam stiffness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ibrahim, Suhaina (2005) Effect of experimental conditions on membrane formation and membrane system configuration for air separation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kormin, Saniah (2005) The effect of heat processing on triterpene glycosides and antioxidant activity of herbal pegaga (Centella asiatica l. Urban) drink. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Suardi, Khairmen (2005) The effect of heat treatment and chromium addition on γ-titanium aluminide resistance to hydrogen attack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Azliza (2005) Effect of impact load on the tubular steel members of offshore structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Sin, Kwan Leong (2005) The effect of incoparating swirl devices at intake port on the performance of compressed natural gas (CNG) engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Govidasamy, Jayakumaran (2005) The effect of over dosage of concrete retarder daratard 40 in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Kuan Yet (2005) Effect of PEG additives on performance of hemodialysis membrane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mohd. Said, Farhan (2005) The effect of pre-drying treatments on the viability of encapsulated lactobacillus bulgaricus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Alwarfalli, Ayman A. A. (2005) The effect of rainrate modeling for the prediction of satellite propagation in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lau, Yee Chen (2005) The effect of sample preparation parameters on magnetoresistance ratios (MR%) in CO/CU nanostructures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yeo, Lee Chin (2005) Effective gene selection techniques for classification of gene expression data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Amin Abdullah @ Abu Bakar, Md. Hanafiah (2005) The effectiveness of natural ventilation design in low cost housing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seth, Azhan (2005) The effects of delays in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Gan, Sim Keat (2005) The effects of floor diaphragms to the lateral stability of multi-storey frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Rival, Rival (2005) Electrical discharge machining of titanium alloy using copper tungsten electrode with SiC powder suspension dielectric fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Khalit, Nuraliza (2005) Electronic community portal for DBKL residental area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Baharon, Mohd. Rizuan (2005) Elliptic curve group over finite field and its application in The Diffie-Hellman key exchange. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hau, Yuan Wen (2005) An embedded cryptosystem implementing symmetric cipher and public-key crypto algorithms in hardware. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mat Jubadi, Warsuzarina (2005) Embedded TCP/IP in sensor nodes (sensornets). Masters thesis, Faculty of Electrical Engineering.

Bhatmalai, Saravanan (2005) Energy management in office complex : case study : Century Square Phase 2, Block 2250, Cyberjaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Engkamat, Adeline (2005) Enhancement of parallel thinning algorithm for handwritten characters using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science & Information Systems.

Anak Engkamat, Adeline (2005) Enhancement of parallel thnning algorithm for handwritten characters using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Khoo, Teng Cheok (2005) Enhancement of the tropicalized lead acid battery by incorporating membrane based gas separation technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kamarudin, Faizah (2005) Estimation of soil compaction parameters based on Atterberg limits. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mogindol, Spencer Hedley (2005) Evaluating interpretation services performance : a case study in Sabah Agriculture Park. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sawawi, Marini (2005) Evaluation of adhesive epoxy materials in a composite/concrete system under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ling, Tung Chai (2005) Evaluation of cracks and disintegrations using close-range digital photogrammetry and image processing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Silas Tirau, Larry (2005) Evaluation of hot mix asphalt(HMA) properties compacted at various temperatures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamran, Kamran (2005) Evaluation of inflow/infiltration and flow characteristics for design of sanitary sewers in Skudai, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Sukor, Nur Sabahiah (2005) Evaluation of laboratory compactive effort on asphaltic concrete mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Syed Mohd. Dardin, Syed Mohd. Fairuz (2005) Evaluation of Reed-Solomon (R-S) Coding performance for M-Ary modulation in AWGN and multipath fading channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusoff, Azmi (2005) The evaluation of site quality management system in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Isha, Mohd. Nasir (2005) Evaluation on current practice in work breakdown structure approach for construction schedules. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sulaiman, Junaida (2005) Experimenting the aplicability of support vector machine regression in rainfall prediction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chin, Sze Nee (2005) Extension of time : the issue of delay notification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wong, Hwee Ling (2005) Face detection using skin color and eigenface techniques for human-robot interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Cheddad, Abbas (2005) Face localization and feature extraction based on Voronoi diagram and Delaunay triangulations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ramasamy, Arulmaran (2005) Facility planning for a container port using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tamin, Callixtus (2005) Factors affecting the 'S' curve in project monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tatiana Rina Puspasari, Tatiana Rina Puspasari (2005) Factors causing the poor performance of construction project. Masters thesis, Universiti Technologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Jamalia (2005) Faedah perlaksanaan kajian pengurusan nilai dan kepentingan penglibatan pengurus fasiliti di peringkat rekabentuk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Othman, Abd. Lateh @ Abd. Latif (2005) Faktor ekonomi sebagai punca tanah terbiar di dalam bandar : kes kajian : pusat bandar Bandaraya Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Haron, Ahmad Tarmizi (2005) Faktor kejayaan kaedah reka dan bina : kajian terhadap kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Ludin, Omar (2005) Faktor kejayaan kaedah reka dan bina : kajian terhadap kontraktor kerjasama. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yahya, Norhayati (2005) Faktor-faktor kegagalan penjualan rumah kos rendah : kajian kes : di Negeri Selangor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mukhatar, Norul-Ainin (2005) Faktor-faktor utama yang mempengaruhi dalam membuat keputusan peruntukan pelaburan harta tanah dari perspektif pelabur. (Kes kajian : syarikat harta tanah di Malaysia). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Haron, Norhazlan (2005) Faktor-faktor yang mempengaruhi penjanaan trip ke tempat kerja dan kesan pelaksanaan teleworking dalam mengurangkan pencemaran udara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Tajjudin, Mazidah (2005) Fan beam optical tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mak, Weng Yee (2005) Fault detection and diagnosis using correlation coefficients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Harun, Noorlisa (2005) Fault detection and diagnosis via improved multivariate statistical process control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Heng, Han Yann (2005) Fault diagnostic advisory system for precut column using rule-based approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Omar, Monalisa (2005) FELDA document management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Daut, Norhayati (2005) Finding best coefficient and fusion of coefficients for similarity searching using neural network algorithms. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Othman, Mohamad Kharulli (2005) Fingerprint reconstruction based on improved directional image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Jeyaraman, Vadivelu (2005) Finite element analysis of reinforced concrete normal beam with web opening. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mohamad, Elmy Johana (2005) Flame imaging using laser-based transmisson tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Leong, Lai Wan (2005) Forensic analysis of alcohol in urine samples employing headspace solid phase micro extraction-gas chromatography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lim, Kie Woon (2005) An FPGA implementation of an elliptic curve processor for an embedded public-key cryptosystem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zakaria, Wan Deraman (2005) Framework for digital strata title using 3D modeling concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Ngadengon@Ngadungon, Rafidah (2005) A full order sliding mode tracking controller design for an electrohydraulic control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yusni Ahmad, Wan Fauzi (2005) Full scale fire test of school building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Razidah (2005) Fuzzy state space modeling for solving inverse problems in multivariable dynamic systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Idroas, Mohamad Yusof (2005) Gasification of paddy husk using cyclone gasifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yajid, Azlin (2005) Gender estimation based on facial image. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamed, Najihah (2005) Graph models for message transmission with time optimality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahmad Abdul Ghani, Nadiatul Adilah (2005) Groundwater study for alluvial aquifer in Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Yassin, Misron (2005) Guna tanah bandar dan proses pembandaran di Bandar Kelang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Osman Elsmani, Rusha Mohammed (2005) Heart sound analysis and statistical charactarization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainal, Faroak Faquruddin (2005) Heat transfer analysis in a semi - cylindrical duct. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shu, Kian Kok (2005) High rise building movement monitoring using RTK-GPS (case study: Menara Sarawak Enterprise). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Amrin, Astuty (2005) High-Temperature Oxidation Of Titanium Aluminides. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Chong, Voon Ping (2005) Hostel management for foreign workers: problems in non-purpose built building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Choy, Hon Nang (2005) Housing scenarios in Klang valley [some observation on factors affecting supply and demand of houses]. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Tan, Han Leng (2005) Human resource planning and human resource development in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan Ah Chik @ Mohamad, Mohd. Saberi (2005) A hybrid genetic algorithm and support vector machine classifier for feature selection and classification of gene expression. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Gan, Teck Hui (2005) A hybrid parallel genetic algorithm for solving job-shop scheduling problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wahidin, Suzana (2005) Identification of important factors that influence the production of lactic acid fermentation by immobilized 'Lactobacillus Delbrueckii' using waste as substrate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lai, Chui Yen (2005) Image matching using relational graph representation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Yunus, Mohd. Amri (2005) Imaging of solid flow in a gravity flow rig using infra-red tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Gomez, Kenneth Brian (2005) Impact analysis of fibreglass reinforced composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wamayo Ouba, Charles Warecka (2005) The impact of land administration on the overall development of Papua New Guinea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Othman, Aida Rizan (2005) Implementation of capability maturity model® integration (cmmi®) in ingenuity microsystems sdn bhd for measurement and analysis, risk management, integrated project management and integrated supplier management. Masters thesis, Universiti Teknologi Malaysia, Advanced Informatics School.

Toh, Chuen Ling (2005) Implementation of direct torque control of induction machines utilizing Digital Signal Processor (DSP) and Field Programmable Gate Arrays (FPGA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Senawi, Ahmad Sazali (2005) Implementation of DQPSK for HF communication system using TMS320VC5416. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ooi, Chia Ching (2005) Implementation of geocast-enhanced AODbis routing protocol in MANET. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Liew, Eric Cheok Fai (2005) Implementation of microsoft project to improve conventional construction reporting system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamad Saleh, Saleha (2005) Implementation of MRAC, SVMPC and PID control based on direct digital control application for dc servomotor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Leong, Lai Chen (2005) Implementation of multiple fan beam projection technique in optical fibre process tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sikh Abdul Aziz, Sheikh Jamsari (2005) Implementation of project management consultant (PMC) in government construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Azila Alya Dahalan (2005) Implementing configuration management activities in XYbase's projects(EGAG project,CIDB project and IUMIS project). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdul Wahab, Nur Ilham (2005) Implementing customer relationship management and service quality in supporting ICT services for CICT, UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shafie, Ana Salwa (2005) Improved tow-term backpropagation error function with GA-based parameter tuning for classification problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ghazali, Ima Saliza (2005) Improving bus services quality : Shah Alam towards sustainable transportation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Chong, Wei Kean (2005) Improving neural networks training using experiment design approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Maganlal, Jayesh M. Patel (2005) Improving the communication performance in synchronous collaborative application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Manshoor, Bukhari (2005) Incompressible flow simulation using S.I.M.P.L.E method on parallel computer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed, Adel Ali (2005) Indoor location tracking in integrated manet mobile IPV 6 network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Abdul Hafiizh (2005) Indoor radiowave propagation prediction and measurement for indoor geolocation system using WLAN. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Zainudin, Zaki (2005) Industrial effluent load characterization of Sungai Perembi watershed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kalesamy, Kohila Malar (2005) Industry requirement analysis for Malaysian IT graduates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Juwari, Juwari (2005) Inferential control of product composition in a distillation column. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lim, Wan Piang (2005) Inferential estimation and control of chemical processes using partial least squares based model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ismail, Mazlan (2005) The influence of intellectual capital on the performance of Telekom Malaysia. PhD thesis, Universiti Teknologi Malaysia, Business & Advanced Technology Centre.

Md. Fauadi, Muhammad Hafidz Fazli (2005) Information requirements for mould making in a job shop manufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chan, Ying Hui (2005) Integrated bimodal security access system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Noor, Norzaliha (2005) Integrated technical problem management system (ITPMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mandala, Satria (2005) Integrating security services into active network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Zadry, Hilma Raimona (2005) The integration of Total Quality Management (TQM) and Theory Of Constraints (TOC) implementation in Malaysian automotive suppliers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Termaringgam, Sashi Kumar (2005) Interactive system for course documentation auditing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lee, Seah Fang (2005) Interest group using electronic management system (i-GEMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Yeoh, Kar Kheng (2005) Intermolecular photoreactions and selectivity studies in confined space of cation-exchanged y zeolites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Saaid@Said, Suzari (2005) Internal audit information system (IAIS) for internal audit department of Golden Hope Plantation Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Badjie, Abdoulie F. (2005) Internet communication through point-to-point protocol on linux operating system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hamzah, Hammuzamer Irwan (2005) Internet data uploading and processing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Tan, Teong Hee (2005) Interpersonal communication : it's significance in affecting construction project team performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zakaria, Siti Fairus (2005) Introducing environment management system within construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik Ali, Nik Arlina (2005) Investigate the influence of the initial solution and neighborhood structure on the tabu search method in job shop scheduling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Isa, Ahmad Hishamuddin (2005) Investigation on problems, issues and challenges of project management on marine concrete repair at TNB's power plant : a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

S. Sabeyga, Saad Ali (2005) Investigative study on oil pollution in the mediterranean sea and libyan coastline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamid, Helda (2005) Iron(III)-porphyrin immobilized on mesoporous A1-MCM-41 and polymethacrylic acid as catalysts for the single-step synthesis of phenol from benzene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Taher, M. (2005) Isolation and in vitro antidiabetic properties of a proanthocyanidin from Cinnamomum zeylanicum. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abdul Air, Irdayati (2005) Kadar ketersediaan tanah untuk pembangunan perumahan di kawasan bandar menurut rancangan tempatan daerah : keberkesanannya dari perspektif pemaju. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ahzahar, Nadira (2005) Kaedah pengurusan kecacatan dan kegagalan struktur bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahzahar, Nadira (2005) Kaedah pengurusan kecacatan dan kegagalan struktur bangunan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Husain, Mohd. Najib (2005) Kajian deformasi pergerakan dinamik bagi struktur bangunan tinggi menggunakan kaedah RTK-GPS dan kaedah analisis spektral. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Wahono, Arie (2005) Kajian faktor-faktor yang mempengaruhi pencapaian subkontraktor dinamakan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abd. Razak, Abdul Syukor (2005) Kajian guna semula efluen domestik untuk siraman tumbuhan lanskap. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mustafar, Mohamad Asrul (2005) Kajian jaringan kawalan pugak bagi negeri Sarawak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Aziz, Anual (2005) Kajian ke arah merealisasikan jaringan rujukan tegak geodetik baru di negeri Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mat Nasir, Nasyairi (2005) Kajian ke atas tahap kepuasan pelanggan terhadap fasiliti ruang pembelajaran di institusi pengajian tinggi awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Hairi Saad, Mohammad Syamsyul (2005) Kajian keberkesanan penswastaan projek melalui kaedah bina-kendali-pindah (BKP) di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Judyar, Zamzarina (2005) Kajian keberkesanan peranan perunding pengurusan projek (PMC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Machap, Vasantakumar (2005) Kajian keberkesanan sistem pengurusan penyelenggaraan turf dan pengairan padang golf 'The Mines Resort & Golf Club'. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Haron, Norhazlan (2005) Kajian kecenderungan pekerja terhadap Teleworking : kajian kes : Bandaraya Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chee, Lip Chew (2005) Kajian kekonduksian ionik terhadap adunan elektrolit polimer PVC-getah asli terepoksi dan PVdF-getah asli terepoksi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md.Yusoff, Nur Izzi (2005) Kajian kelakuan pasir penyambung turapan penguncian blok konkrit pada jarak sambungan dan kecerunan yang berbeza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yaacob, Mohamad Sazali (2005) Kajian keperluan penyumberan luar kerja-kerja pengurusan harta kajian kes : unit pengurusan harta (UPH), Institut Penilaian Negara (INSPEN) Bangi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ghazali, Mimi Diana (2005) Kajian kesesuaian 'real time kinematic global positioning system' dalam kerja pemantauan jambatan : (kajian kes : Jambatan Pulau Pinang). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Arshad, Huraizah (2005) Kajian parameter pengurusan risiko fasiliti fizikal institusi pengajian tinggi : kes kajian : Fakulti Kejuruteraan Mekanikal (FKM) dan Fakulti Kejuruteraan Kimia dan Kejuruteraan Sumber Asli (FKKKSA), UTM, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdullah, Faridah (2005) Kajian pemulihan projek pembangunan kediaman terbengkalai di dalam Wilayah Persekutuan Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marpongahtun, Marpongahtun (2005) Kajian penentuan sebatian organoarsenik menggunakan pelbagai kaedah voltammetri dengan elektrod titisan raksa tergantung. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Ahmad, Wan Kamaruzaman (2005) Kajian penggunaan sedimen sungai sebagai petunjuk pencemaran aktiviti antropogenik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mahmud, Mahmud (2005) Kajian penspesiesan dan ketoksikan logam dalam sistem akuatik tasik bekas lombong bijih timah menggunakan model unjuran. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Salleh, Sophia (2005) Kajian persepsi penyewa dan pengurusan terhadap tunggakan sewa : kajian kes : Bahagian Pengurusan Harta, Majlis Perbandaran Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ab. Salam, Nasruddin (2005) Kajian ramalan kedalaman laut menggunakan anomali graviti marin daripada satelit radar altimeter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mat Sarip, Abdul Rahim (2005) Kajian secara teori dan ujikaji terhadap pemampat ram gelangsar berputar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Silviawati, Sri (2005) Kajian simulasi berbantukan komputer bagi menilai kesilauan cahaya siang melalui tingkap di dalam sebuah ruang pejabat di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Asbollah, Asra Zaliza (2005) Kajian sumberjaya landskap pelancongan di Taman Awam Lumut Waterfront. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kamarulzaman, Noorazlina (2005) Kajian tahap keberkesanan pengurusan fasiliti persekitaran pejabat dan kesannya terhadap tumpuan kerja pelanggan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kasmuri, Zamry (2005) Kajian terhadap aduan suhu di dalam bangunan : kajian kes : menara Celcom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kabis, Alex Anthony (2005) Kajian terhadap peranan PBT dalam mengawal aktiviti sektor informal (gerai dan pasar) : kajian kes : Majlis Perbandaran Johor Bahru Tengah (MPJBT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Ibrahim, Nor Adilah (2005) Kajian terhadap projek perumahan di Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaafar, Abu Almohtar (2005) Kajian terhadap sistem pengurusan penyelenggaran Jabatan Perumahan dan Pembinaan Angkatan Tentera Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sahibun, Kamarudin (2005) Keberkesanan kaedah takungan ke atas kawalan air larian perbandaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ibrahim, Alias (2005) Keberkesanan pengeluaran hakmilik kekal berdasarkan pindaan Kanun Tanah Negara 1965 (AKTA A1104). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Md. Abu Bakar, Norlinda (2005) Keberkesanan peranan Akademi Binaan Malaysia (ABM) dalam pembangunan industri binaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ismail, Noor Akmal Adillah (2005) Keberkesanan sistem anggaran kos yang dipraktikkan oleh jurukur bahan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Afgani, Yendo (2005) Kemapanan luar bandar : satu kajian ke atas pengamalan sikap dan prinsip hidup mapan pada komuniti Pasemah Kabupaten Lahat, Sumatera Selatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yusof @ Suradi, Fazilah (2005) Kepimpinan : jurutera tapak bina mewakili pengurus baris-pertama dalam pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Belayutham, Sheila (2005) Kerja pembaikpulihan bangunan makmal komputer sekolah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Wan Dagang, Wan Rosmiza Zana (2005) Kesan dedahan ultrabunyi secara in-situ dalam meningkatkan fluks bagi penuras mikro aliran silang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Jusoh, Kamal Ariffin (2005) Kesan kepada sifat-sifat elektrik akibat radiasi sinar-gamma dan neutron pada transistor kesan medan logam oksida-silikon (MOSFET). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Salleh, Che Senu (2005) Kesan ofset dan atitud bot ukur ke atas data hidrografi pemerum gema alur tunggal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ahmad Dali, Nurul Firdaus (2005) Kesan peruntukan efektif bagi pelaburan harta tanah terhadap prestasi syarikat harta tanah di bursa Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Tang, Howe Eng (2005) Kesan sistem pembelajaran berkomputer matematik berasaskan personaliti. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ishak, Mohd. Fakhrurrazi (2005) Kesesuaian ujikaji-ujikaji makmal bagi menilai kebolehrobekan in-situ Batu Pasir dan Syal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Hasan, Rozaimi (2005) Keupayaan dan keberkesanan berup radio Differential Global Navigation Satellite System (DGNSS) bagi penentududukan hidrografi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Awang, Abd. Rahim (2005) Keupayaan galas tanah liat lembut bertetulang menggunakan gabungan buluh - geotekstil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Rusli (2005) Knowledge management system architecture for organizational learning with collaborative environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yazid, Yaz Ezran (2005) Knowledge sharing portal for ICT academic community. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hassan, Mohamad Rozi (2005) Kompetensi dan keberkesanan latihan teknologi maklumat (TM) di Institusi Pengajian Tinggi Awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development .

Wong, Leong Sing (2005) Laboratory evaluation of horizontal coefficient of consolidation, Ch of fibrous peat soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gan, Ming Ong (2005) Lateral stability of high-rise building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thian, Siaw Hui (2005) Leachate treatment by floating plants in constructed wetland. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Mohd. Ezree (2005) Level of service (LOS) for multilane highway and road accident information system development of Batu Pahat area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kusuma, Iwan Permadi (2005) Load distribution in edge-stiffening beam of a simply supported bridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz, Mohamad Zoinol Abidin (2005) Low noise amplifier circuit design at 5 GHz to 6 GHz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Sungkar, Humam Nukman (2005) Maintenance management : case study : multi storey student hostel at Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yacob, Syamilah (2005) Maintenance management system through strategic planning for public school in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty Of Civil Engineering.

Meftah sufelgin, Atef Salem (2005) Manoeuvring of pusher-barge in deep and shallow water conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ling, Sok Ping (2005) Manpower needs in construction industry : foreign labour issues and implications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Norhan, Norazizone (2005) The manufacture of hip implant component using advanced manufacturing techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sim, Lee Gaik (2005) Mapping approach for examining waste management within construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Essa, Mohamed Jama (2005) Mapping of G3 system for outdoor GSM signal strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Rahman, Ana Rozaininaida (2005) Masalah hubungan sub-kontraktor (domestik) dengan kontraktor utama dalam projek pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Noor Majid, Ahmad (2005) Masalah pelaksanaan dan penyenggaraan sistem pengurusan kualiti ISO 9001. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Md. Sarif, Norhafizah (2005) Mathematical modelling for the nonlinear mechanism of Tsunami wave generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shafie, Sharidan (2005) Mathematical modelling of g-jitter induced free convection. PhD thesis, Universiti Teknologi Malaysia, Fakulti Sains.

Maan, Normah (2005) Mathematical modelling of mass transfer in a multi-stage rotating disc contactor column. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Tan, Siaw Eng (2005) Mathematical modelling of optical soliton transmission. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shamsudin, Shamsul Anuar (2005) Mechanical and thermodynamics analyses of the two-stroke swivel motion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Johari, Zuraimi (2005) Mechanical properties of high strength concrete at high temperature loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Chee Weng (2005) Mechanism-based reliability model for electronic packages. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Hasmalinda (2005) Mengadaptasikan agen pintar di adalam sistem maklumat kursus sebagai pengurus pangkalan data pengajar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Awang, Suryanti (2005) Menghasilkan pergerakan manusia 3D berjalan menggunakan rangkaian neural. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Tobi, Siti Uzairiah (2005) Mengkaji masalah pengurusan gerai sedia ada bagi cadangan untuk melaksanakan konsep khidmat luaran (OUTSOURCING). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Zakaria, Zamzarina (2005) Mengukur kepuasan pelanggan dan kakitangan organisasi dengan menggunakan model balanced scorecard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Muhamad Azmi, Mohd. Shahril (2005) Menjajarkan pengurusan harta tanah dengan strategi korporat : kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kamarudin, Khairul Hisyam (2005) Merangka strategi pembangunan mapan komuniti orang asli: suatu penilaian tahap kemapanan komuniti Temiar di Rancangan Pengumpulan Semula (RPS) Legap & Pos Kuala Mu, Daerah Kuala Kangsar, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lau, Chin Guan (2005) Mesoporous MCM-48 synthesized from rice husk ash silica : physicochemical properties and its catalytic activity in acylation reaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Soon, Ee Pheng (2005) Methane conversion to liquid hydrocarbons in single-and two-step processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Sim, Lin Lin (2005) Microbial community analysis in upflow anaerobic sludge blanket for the treatment of palm oil mill effluent. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soh, Ping Jack (2005) Microstrip antennas with different feeding method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Noorasliza (2005) Microstrip sierpinski carpet antenna design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hassan, Siti Habsah (2005) Mineralization studies on paraquat and malathion using TiO2/ZnO based photocatalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Teoh, Lay Eng (2005) Minimizing makespan and total weighted tardiness for job shop scheduling problem using shifting bottleneck heuristic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamad Bhkari, Norshariza (2005) Modal analysis of concrete bridge decks subjected to free vibration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alasso, Ahmed Omar (2005) A model for implementation of preventive maintenance management programs in construction project equipment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, Norazah (2005) Model pentaksiran pembelajaran pelajar menggunakan kaedah hibrid. PhD thesis, Universiti Kebangsaan Malaysia, Faculty of Technology and Science Information.

Abdullah, Noraliza (2005) Modeling and optimal control of two-link robot manipulator using model-reality algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Zainal, Zairulazha (2005) Modeling and vibration control of a gantry crane. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahmat, Siti Nazahiyah (2005) Modeling of non point source pollution from residental and commercial catchments in Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Kadir, Herdawatie (2005) Modelling and control of a balancing robot using digital state space approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wijaya, Moh. Lutfi (2005) Modelling and control of an intelligent antilock braking system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunus, Sabariah (2005) Modelling of acidic wastes and dispersion in Sungai Selangor saline zone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Lee, Hui Peng (2005) A modified giffler and thompson genetic algorithm on job shop scheduling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lim, Pei Yi (2005) Modular structured multilevel inverter as active power filter with unified constant-frequency integration control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rahman, Kamalesh (2005) Molecular and enzymatic studies of cyclodextrin glucanotransferase gene from Bacillus sp. TS1-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chan, Giek Far (2005) Molecular and enzymatic studies on the decolourization of azo dyes by Citrobacter freundii A1. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ong, Rui Min (2005) Molecular cloning of Cyclodextrin glucanotransferase gene from Bacillus sp. G1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chung, Eddie Chie Jin (2005) Motivational needs of civil engineers in construction sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ahmed, Syed Faiz (2005) Multiband antenna for mobile handset. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Shah, Marina (2005) Multiway in-phase sinusoidal microwave power divider. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Goh, Wei Wei (2005) Narratological framework for interactive multimedia learning environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Aashique, Mohammad Aashraful (2005) Network monitoring application for IPV6 network with IPSEC. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tea, Swee Yin (2005) A new systematic technique for simultaneous water and energy minimisation in process plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Kuan, Chin Hoay (2005) Non-contact detection of magnetic flux leakage on steel pipe using digital fluxgate magnetometer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bong, Charles Hin Joo (2005) Non-darcian hydraulic characteristics Malaysian peat soil : a laboratory investigation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Fazalul Rahiman, Mohd. Hafiz (2005) Non-invasive imaging of liquid/gas flow using ultrasonic transmission-mode tomography. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Che Husni (2005) Non-linear analysis of a symmetric flush end plate bolted beam-to-column steel connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hudha, Khisbullah (2005) Non-parametric modeling and modified hybrid skyhook groundhook control of magnetorheological dampers for automotive suspension system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Siong Wee (2005) Nonlinear finite element analysis (NLFEA) of reinforced concrete tube in tube tall building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

See, Hong Heng (2005) Novel applications of elevated temperature high performance liquid chromatography: analyses of triazole fungicides and vitamin E isomers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ahdi, Hassanazhari (2005) Numerical analysis of convective heat transfer in a triangular duct with radiation boundary conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Chun Chai (2005) A numerical analysis of fixed offshore structure subjected to environmental loading in Malaysian water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ranom, Rahifa (2005) Numerical conformal mapping for exterior regions via the Kerzman-Stein Kernel and the cauchy's integral formula. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Liew, Kuok Jew (2005) Numerical method heat transfer analysis in annular sector ducts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Badrealam, Sabariah (2005) Numerical modelling of volatile organic compounds for multiphase flow and pollutant transport in nonisothermal porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Cheng, Chin Fook (2005) Numerical study of acoustic waves in a rectangular chamber with binary gas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Adizul (2005) An observer design for active suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ishak, Azimah (2005) Office collaboration system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Ishak, Azimah (2005) Office collaboration system/ Azimah Ishak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yusof, Yuhani (2005) On 2-engel groups and their degree of abelianness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Md. Said, Junaida (2005) On the hensel lifting method of computing the GCD of two univariate polynomials over the integers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Safuan, Hamizah (2005) On the lagrange-burmann theorem and the generating relations for orthogonal polynomials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Kumar, Nadaraja Ganes (2005) On-line breakthrough volume determination of PS-DVB based adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Samsun Baharun, Mohd. Nor Haizam (2005) Online certificate injection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Raman Nair, Shobani (2005) Online helpdesk for Maybank account payable system (MAPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Khaw, Tan Cheng (2005) Opportunities of tenancy management services by FM Organisation in Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Rudrusamy, Bhuvendra (2005) Optimal input shaping for vibration control of a flexible manipulator using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohamad Samuri, Sazalina (2005) Optimisation of operating parameters for the removal of ethanol from Zingiber officinale Roscoe (ginger) oleoresin using short-path distillation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Leiw, Sook Fun (2005) Optimization of modified sol-gel method for the formation of tetragonal phase zirconia in Zr(IV)/Ce(IV) catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ossen, Dilshan Remaz (2005) Optimum overhang geometry for high rise office building energy saving in tropical climates. PhD thesis, Universiti Teknologi Malaysia.

Rafidah Ashari (2005) Outsourcing in the IT industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Harun, Mohd. Ruzi (2005) Part combination of design for assembly using Effort Flow Analysis (EFA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gan, Hock Lai (2005) Password-based authentication in wireless LAN. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Khamis, Nor Hisham (2005) Path reduction factor for microwave terrestrial links derived from the Malaysian meteorological radar data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yen, Lan Hong (2005) Pelaksanaan konsep bandar pintar (Intelligent City) ke arah perancangan bandar era revolusi teknologi maklumat (IT) : kajian kes : Cyberjaya, Kawasan Koridor Raya Multimedia (MSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Meon, Norshimah (2005) Pelaksanaan projek reka dan bina dari persepsi pihak klien, kontraktor dan perunding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Baharudin, Nur Hasimah (2005) Pelancongan kesihatan di Melaka : ciri-ciri perjalanan dan motivasi pelancongan Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sim, Kwang Thai (2005) Pelarasan jarangan kadaster menggunakan teknik kuasa dua terkecil : isu stesen kawalan dan perisian. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Ibrahim, Imran (2005) Pembangunan antena lubang alur untuk aplikasi capaian wayarles berjalur lebar tetap pada frekuensi 5725-5875mhz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Aditia, Ezra (2005) Pembangunan kiosk maklumat kawalan pembangunan berasaskan web GIS bagi perancangan dan pengurusan bandar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Md. Tarmizi, Nazirah (2005) Pembangunan pangkalan data carta nautika digital untuk kegunaan bot-bot kecil dan rekreasi di Malaysia : (kajian kes : Langkawi). Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Ishak, Mohamad Shaiful Ashrul (2005) Pembangunan pembakar berbahan api cecair dengan ciri-ciri rendah NOx. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Broh, Zainal (2005) Pembangunan perisian FiziO "Fizik Cahaya" Fizik KBSM tingkatan 4. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Razali, Saifudin (2005) Pembangunan perisian gandingan perkakasan bagi sistem pensuisan digital. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ali, Mohammad (2005) Pembangunan proses bisnes ringkasan projek kes kajian : perkhidmatan ubahsuai dan naiktaraf ruang Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mat Amin, Mat Atar (2005) Pembangunan set perlakuan dalam persekitaran kolaboratif berasaskan multi-user dimension object oriented (MOO) untuk pengajaran dan pembelajaran bahasa: kajian kes di KUSZA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali, Zanil (2005) Pembangunan sistem automasi penilaian kadaran bagi caruman membantu kadar : kajian kes : Majlis Perbandaran Kulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Kasim, Shahreen (2005) Pembangunan sistem bajet ladang untuk LKPP Corp. Sdn. Bhd. yang teragih, pelbagai aras dan pelbagai perusahaan. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Ariff, Mohd. Farid (2005) Pembangunan sistem perolehan imej fotogrametri digital jarak dekat bagi pengukuran craniofacial. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mat, Abd. Rahman (2005) Pembinaan dan keberkesanan perisian berbantukan komputer bagi penyelesaian masalah konsep MOL berdasarkan Model Konstruktivisme Saunders dan Hein. PhD thesis, Universiti Teknologi Malaysia, Faculty of Education.

Ahmad Hijazi, Mohd. Hanafi (2005) Pemodelan rekomendasi halaman web berasaskan teknik perlombongan data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sarmani, Yatimah (2005) Pendekatan kaunseling Islam : satu analisis kualitatif model kaunseling berasaskan sifat-sifat manusia oleh Imam Al-Ghazali. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Utaberta, Nangkula (2005) Pendekatan seni bina Islam berlandaskan al-Qur'an dan al-Sunnah : meneliti kesesuaian dari idea-idea reka bentuk organik Frank Lloyd Wright. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ab. Rashid, Raizul Azita (2005) Pendopan tanpa elektrod mangan dioksida elektrolitik dengan nikel dan penciriannya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Senan, Norhalina (2005) Penentuan bioaktiviti molekul terhadap aids : perbandingan antara set kasar dan rangkaian neural. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Manaf, Siti Zuraida (2005) Penentuan kawasan yang sesuai untuk perletakan tapak kemudahan rekreasi dengan menggunakan aplikasi GIS : kajian kes : kawasan pihak berkuasa Ampang Jaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Yusoff, Ummar (2005) Penentuan parameter tertentu dalam proses pemesinan kisar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mustafa, Norzamzila (2005) Pengambilan pekerja asing dalam industri pembinaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Jopely, Juliana (2005) Pengaruh kekuatan konkrit ke atas gayalaku sambungan rasuk-tiang luaran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abd. Hamid, Ahmad Ghadaffi (2005) Pengekstrakan data berasaskan pendekatan ontologi: kes data jujukan hidrologi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Nik Mustapha, Nik Hamidi (2005) Penggunaan analisis jurang (Gap Analysis) terhadap kualiti perkhidmatan fasiliti di kompleks membeli-belah : kes kajian : Plaza Angsana, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Wong, Fang Yun (2005) Penggunaan elektrod cetakan skrin gandingan karbon dan Ag/AgCI bagi penentuan logam berat dan pestisid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Yunus, Khairul Nizam (2005) Penggunaan kaca buangan sebagai agregat halus dalam turapan asfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ahmad, Fatimah Shafinaz (2005) Penggunaan sistem maklumat geografi untuk meramal keruntuhan cerun di Pulau Pinang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Chung Hwee (2005) Penggunaan sistem pengurusan maklumat fasiliti (FIMS) dalam pengurusan bangunan : kes kajian : Plaza Angsana Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Kadir, Tuty Asmawaty (2005) Penghantaran data spatial bagi sistem maklumat geografi menggunakan senibina sebelah pelanggan dan teknik pemecahan data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Shahlan, Haryati (2005) Pengkonturan garis sempadan wajah manusia menggunakan model kontur aktif. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Omar, Mohd. Nizam (2005) Pengoptimuman algoritma pengesanan batu loncatan dalam sistem pengesanan pencerobohan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Janardhanan, J. Vijay (2005) Pengubahsuaian rumah di Daerah Johor Bahru Tengah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdul Rahman, Ahmad Syayuthi (2005) Pengujian retakan kakisan tegasan dan pencirian spesimen aluminium 6063. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jallah, Nulihda (2005) Pengukuran dan penilaian kualiti hidup secara reruang menggunakan aplikasi GIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Che Wan Embong, Che Wan Mohd. Rapanah (2005) Pengupayaan komuniti dalam projek pelancongan warisan budaya melalui dimensi : satu penilaian ke atas Saung Angklung Udjo, Bandung, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mat Zin, Mohamad Alwi (2005) Pengurusan bahan buangan pembinaan : satu kajian kes projek pembinaan Jalan Simpang Pulai Lojing - Gua Musang-Kuala Berang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Fadzida (2005) Pengurusan insurans dalam industri pembinaan di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamaruzaman, Nor Zaid (2005) Pengurusan kawalan keselamatan dalam kawasan kediaman komuniti berpagar berkonsep 'Gated and Guarded Area'. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Sabarudin, Aswahida (2005) Pengurusan rantaian bekalan menggunakan MRP dan DRP di FAMA. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Hashim, Norfashiha (2005) Pengurusan sisa bahan di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ramlan, Rohaizan (2005) Penilaian kaedah laluan terpendek : rangkaian jalan raya kajian kes : Negeri Johor dan Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Pazin, Fazliana (2005) Penilaian pengalaman dan tahap puas hati pelancong terhadap program homestay : kajian kes : Kg. Desa Murni, Termerloh, Pahang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Chong, Ya Cheng (2005) Penilaian terhadap tahap kesedaran gangguan seksual di kalangan pekerja wanita : kajian kes di Kemtronics (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management and Human Resource Development.

Abdul Jalil, Rozita (2005) Penjajaran jujukan berpasangan setempat bagi protein : penentuan parameter matriks penggantian dan jurang penalti dalam pengaturcaraan dinamik Smith-Waterman. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ma'arof, Ismail (2005) Penjanaan dan pengukuran model 3D dengan perisian photomodeler. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mohd. Salleh, Marmy Roshaidah (2005) Penyarian zeaxanthin dari sayur-sayuran tempatan : perbandingan kaedah penyarian dan kesan parameter proses terhadap hasil sarian zeaxanthin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Musa, Sabariah (2005) Peramalan siri masa aliran sungai dengan kaedah arima dan pelicinan eksponen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ismail, Mohd. Maideen Mustafah (2005) Perbandingan proses pra-pembangunan tanah : kajian kes - Majlis Perbandaran Kuala Terengganu dan Majlis Daerah Marang. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science And Engineering.

Naam, Sharinatul Aziah (2005) The perception and current practice corporate real estate management in the Malaysian retail sector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Boey, Kean Hong (2005) Performance comparison and optimization methodologies between microengine C and microcode in IXP12XX environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Rahim, Erween (2005) Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Abdull Zubi (2005) Performance evaluation of wireless multicarrier modem with DQPSK modulation for HF communications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Wan Nik, Wan Mohd. Norsani (2005) Performance investigation of RBD palm oil as hydraulic fluid using bench tests and hydraulic test RIG. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Basharie, Siti Mariam (2005) Performance modelling of refrigerants in a vapor compression refrigeration cycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Purnamirza, Teddy (2005) The performance of OFDM in mobile radio channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Yap, Sze Jeat (2005) Performance of the constructed wetlands for domestic wastewater treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Mat Husin, Haliza (2005) Performance study of GPRS in mobile communications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lee, Eng Kean (2005) Performance study of IXP1200 network processor implementing stateful packet filteing firewall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rasli, Maslinda (2005) Performance study of orthogonal frequency division multiplexing (OFDM) in multipath environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mohd. Fahmi, Azlin (2005) Performance study on effect of convolutional coding in WCDMA system with different channel condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Gani, Fazlina (2005) Performance study on GSM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Muhammad Najib (2005) Performance study on high data rate modulation technique of W-CDMA in multipath fading channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Che Mustapha (2005) Permasalahan pembangunan tanah pertanian di pinggir bandar: kes kajian dusun buah-buahan Keramat Pulai, Ipoh, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Razali, Mohd. Hasmizam (2005) Physical and catalytic activity studies of nickel oxide based catalysts towards methanation rection of natural gas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ng, Sook Chuin (2005) Physical properties and photocatalytic degradation studies of chlorinated hydrocarbons using TiO2 based thin films. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Thanapalasingam, Vynavi (2005) Pollution status of the Sungai Skudai river system through heavy metals. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Rahman, Norizah (2005) Polyethylene oxide-mcm-41 and polyaniline-mcm-41 nanocomposites: physicochemical and conducting properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Shee, Yu Gang (2005) Polymer based optical waveguides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lau, Chia Sing (2005) Poor construction documentation : causes and impact on client's organizations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Mohamed, Aida (2005) A portal based knowledge management solution for an editorial department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Syed Ali, Sharifah Rahimatul-Hana (2005) Pre-talent management for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty Of Civil Engineering.

Abdalla, Saad Osman (2005) Predicting protein secondary structure using artificial neural networks and information theory. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Awang, Muhamad Khairudin (2005) Prediction of noise radiation on cylinder head. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamal, Mohamad Hidayat (2005) Prediction of sedimentation rates in a navigation channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Chan, Yen Nee (2005) Preparation and characterization of conducting polyaniline and polyaniline-titanium(iv) oxide composite blended with poly(vinyl alcohol). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Hashim, Mohd. Helmy (2005) Preparation and properties characterization of P2O5-KNO3-K2O glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Koh, Chew Leng (2005) Principles of knowledge transfer in cost estimating conceptual model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sheikh Fadzullah, Faridah Hanim (2005) Printed microwave wideband passive balun. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chowdhury, Md. Asasul Islam (2005) Priority queuing for real time services in diffserv IPv6 network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Koothayan, Yugabalan (2005) Probabilistic based design for connecting links in single point mooring system subjected to dynamic spectral fatigue line tension. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Mohd. Sham (2005) The probability that two elements commute in some 2-generator 2-groups of nilpotency class 2. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohd. Zawawi, Rusniza (2005) Production of biosurfactant by locally isolated bacteria from petrochemical waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Md. Zain, Wan Salwanis (2005) Production of cyclodextrin glucanotransferase from alkalophilic bacillus sp. Ts1-1 using fed batch culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Chai, Voon Chiet (2005) Professional liability of civil engineer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Kamarol Zaman, Norziha (2005) Project information system for Putrajaya Holdings Sdn Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Kamal, Normadiah (2005) Project management for architects the learning outcome. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Zainal Abidin, Nazatul Azleen (2005) Promoting reflective practice in UTM's teaching community with the use of information technology (IT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Arman Ali, Zainab (2005) Properties of Malaysian fired clay bricks and their evaluation with international masonry specifications - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nizar, Mohd. Ariffin (2005) The proposition of custom development model (CDM) for Account Payable (AP) in Integrated Management System (IMS) at Integrated Knowledge and Campus Management (IKCM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Md. Taujuddin, Nik Shahidah Afifi (2005) Protokol pengurusan kekunci keselamatan internet bagi algoritma penyulitan advance encryption standard (AES) dalam Internet Protocol Security (IPSEC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Leong, Jenney (2005) Prototype home loan packages selection decision support system using financial model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Aziz, Nor Hidayati (2005) Radar performance analysis in the presence of sea clutter. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Shairi, Noor Azwan (2005) Radio frequency transceiver design for wireless local area network bridge system at 5725 -5825 MHz. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmat Nor, Nor Irwan (2005) Rainfall - runoff modeling using artificial neural network method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Ahmat Nor, Nor Irwan (2005) Rainfall-runoff modelling using artificial neural network method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rana, Mohammad Azam (2005) Randomized particle cloud modeling for virtual environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Lau, Shiew Wei (2005) Reactive extraction of antibiotics : equilibrium and kinetic study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Abd. Lah Sani, Muhammad Reduan (2005) Real-time video streaming over wireless LAN (802.11b) ad hoc network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ismail, Rozana (2005) Redesigning the project monitoring process : (Case Study : Pejabat Harta Bina, UTM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Chin, Doris Chong Leng (2005) A reliability analysis of a Malaysia jacket platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kumar, Guna (2005) Reliability analysis of prestressed concrete bridge girder beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Kok Shien (2005) Reliability analysis on the stability of slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdl. Aziz, Noraisyah (2005) Reliability data analysis for inspection equipment at PUSPAKOM, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Md. Nor, Noorsuhada (2005) Remote data transfer for structural health monitoring of bridges. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abdul Basit, Kharul Anuar (2005) Rescue of construction companies in Malaysia : the effectiveness of using the existing legal frameworks particularly section 176 of the companies Act 1965 [Act 125]. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Teoh, Leong Seng (2005) Research on the significance of facilities management factors to the office building occupancy : case study : Holiday Plaza Office Tower, Johor Bahru, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Elbuni, Nureddin Mohamed (2005) Resistance analysis of pusher barge system in calm water and in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hameed, Aftab (2005) Resource-driven scheduling : barriers to implementation. Masters thesis, University Teknologi Malaysia, Faculty Of Civil Engineering.

Jamaludin, Irma Wani (2005) Riemann surface : some structure of ellipsoids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Jasril, Jasril (2005) Robot simulation software virtual reality approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Sholihah, Arif Budi (2005) The role of informal street activities in the context of conserving urban cultural entity : case study : Malioboro Street, Yogyakarta Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Siah, Bee Yong (2005) The roles of manufacturers in achieving effective ISO 14001 certification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Jasiman, Mohd. Salim (2005) Satu tinjauan ke atas sistem kutipan hasil cukai diperingkat pihak berkuasa tempatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Zainal Alam, Muhd. Nazrul Hisham (2005) Scale-up strategies in stirred and aerated bioreactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Wan Mohamed, Wan Fahimi (2005) Scene change detection method for MPEG video. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chidambaram, Nadaraj (2005) Sea clutter characterisation & small target detection in maritime surveillance radar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Chong, Chee Ming (2005) The selective catalytic reduction of nitric oxide by propylene over bimetallic CeO2-ZrO2 supported catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Monjurul Alam, S. M. (2005) Separation of organophosphorus pesticides using micellar electrokinetic chromatography. PhD thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ismail, Dzulkarnaen (2005) Services provided by project management consultant in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohamed (2005) Setinggan dan permasalahannya serta penyelesaian ke arah setinggan sifar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Zanal, Azuawati (2005) Sewerage planning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Ja'afar, Abd. Shukur (2005) Sierpinski gasket patch and monopole antenna. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad Radzi, Syafeeza (2005) Simulation of 0.18 micron MOSFET and its characterization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ng, Soon Hwa (2005) Simulation of heat transfer in microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baharudin, Zikri Abadi (2005) Simulation of low-voltage AC protection systems using electromagnetic transient program (EMTP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Othman, Norasman (2005) Simulation of saltwater intrusion in alluvial aquifer at Kg. Tekek, Tioman Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Muhammed Mansor Ben Karsa, Muftah Naji (2005) Simulation study of an advanced control strategy for a PUMA like robot manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tung, Chun Yaw (2005) Simulation study on the carbon dioxide reforming of methane using hydrogen permselective membrane reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Mondali, Mondali (2005) Single point positioning using low cost single frequency GPS receiver. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Mustahim, Suriani Sulaiman (2005) Sinkholes zones detection using lineament derived from remote sensing technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Che Rosli, Khairunnadwa (2005) Sistem analisis sokongan perancangan gunatanah bandar : kajian kes : kawasan Bukit Jalil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wang, Chih Fong (2005) Sistem bantuan keputusan penempatan dan pertukaran guru (SBKPPG) untuk pejabat pendidikan daerah (PPD). Masters thesis, Universiti Teknologi Malaysia.

Mohd. Sofi, Shakirah (2005) Sistem bantuan keputusan pengumpukan mesin di Kilang Top Empire Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Roslan, Kamsani (2005) Sistem pemantauan projek perisian di Bahagian Teknologi Maklumat, Jabatan Perkhidmatan Awam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Supangat, Ehwan (2005) Sistem pengajaran kendiri sejarah berasaskan modul teras cabang Shaharom. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdul Ghani Yolhamid, Mohd. Najib (2005) Sistem pengenalan digit. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abu Bakar, Noor Suriana (2005) Sistem penilaian kualiti e-servis di Perpustakaan Sultanah Zanariah (PSZ) UTM, Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Mohd. Mohyin, Mohd. Johari (2005) Sistem perancangan kewangan islam : SPEKIS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ab. Jalil, Haryanti (2005) Sistem permohonan lesen perniagaan dan pengurusan dokumen jabatan kesihatan dan lesen Majlis Perbandaran Johor Bahru Tengah (MBJBT) berasaskan web. Other thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Pirah, Amy (2005) Sistem sekuriti di tempat letak kereta : kajian kes : City Square Shopping Centre, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Musa, Shaharuddin (2005) Skim komuniti berpagar di Malaysia : isu-isu pembangunannya terhadap pemilikan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Choong, Lai Mun (2005) Small aperture radial waveguide slot array antenna design and development for wireless local area network application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ngali, Mohd. Zamani (2005) Solution to navier-stokes equation in stretched coordinate system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tiong, Wei King (2005) Solutions of the Kadomtsev-Petviashvili equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Yap, Siew Wooi (2005) Solving cost allocation problems using cooperative game theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Appalasamy, Sashirekha (2005) Solving job shop scheduling problem (JSSP) with different performance measures using LRNN method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Younas, Adnan (2005) Spatio-temporal object-relational model for geographical information systems (STORM-GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Harun, Mokhtar (2005) Speech intelligibility prediction model in room with reflective dome. PhD thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Oh, Chai Lian (2005) Stability of reinforced concrete structure on elastic (perfectly plastics) soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Adimulam, Vijayasingam (2005) Staffs performance in a property management company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Azmi, Mastura (2005) Static load test - a comparison of ultimate load between statnamic and maintained load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahmat, Mohd. Fadli (2005) Static security assessment on power system using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Rahman, Norashidah (2005) Static strength of tubular DT joints using LUSAS finite element software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Kong Wah (2005) The status on application of facilities information management system (FiMS) in the managing of high-rise building in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Abdul Raman, Norazmein (2005) Strategi pembuatan produk untuk permintaan dinamik di dalam baris pengeluaran bersiri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tee, Bun Pin (2005) Strengthening of concrete slab with opening using external fiber reinforced polymer (FRP) strip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Abu Bakar, Suriani (2005) The structural and optical properties of hydrogenated amorphous carbon (a-C:H) thin films deposited using a direct current-plasma enhanced chemical vapour deposition (DC-PECVD) technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Anthony Hasbi, Hasbullah (2005) Structural properties of hydrogenated amorphous silicon (A-SI:H) thin film grown via radio frequency plasma enhanced chemical vapor deposition (RF PECVD). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sandra, Nevy (2005) Strut-and-tie method : analysis and its application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Ahmad Radzi, Ahmad Safuan (2005) The study of causes and effects of change order to engineering consultant practitioners. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zaman @ Bujang, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Ismahani (2005) Study of enhanced DCF (EDCF) in multimedia application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, You Hwa (2005) A study of facilities risk management process in a public listed company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Sim, Boon Hun (2005) A study of macro economy in determining the commercial property market. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Astuti, Budi (2005) Study of optical properties of P2O5 - Sm2O3 - MnO2 glass system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Husain, Mohd. Nor (2005) The study of safety risk at construction site : employers' and employees' perpectives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Munajat, Nur Farizan (2005) Study of saturable absorber materials for Q-switching dye laser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bambang, Pramudono (2005) Study On Emulsion Stability And Chemical Demulsification Characteristics Of Crude Oil Emulsion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Nurul Azlina (2005) Study on important parameters affecting the hydro-distillation for ginger oil production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Samad, Zaiton (2005) Study on iron and manganese removal in river water for textiles industry usage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mokhtar, Anis Shahida Niza (2005) Study on loss characteristic of polymer material for optical waveguide application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abd. Ghani, Ahmad Shukri (2005) A study on project delivery systems used in the offshore oil and gas development projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Lee, Yuk Choi (2005) A study on simulated rainfall noise generation and prediction of rain noise for composite roof constructions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruddin, Mohd. Johari (2005) A study on the effect of emulsion concentration and microwave output power levels on microwave heating and separation of water-in-oil emulsions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Sulaiman, Ahmad Ziad (2005) A study on the effectiveness of in-situ high intensity ultrasonic (HIU) in increasing the rate of filtration in palm oil refining industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ponniran, Asmarashid (2005) Study on the performance of underground XLPE cables in service based on tan delta and capacitance parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdul Wahab, Maszuwita (2005) A study to ascertain customers' satisfaction on building performance and facilities provided in Polytechnic Kulim. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Manoharan, Ravichandran (2005) Subcontractor selection method using analytic hierarchy process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Khin Chung (2005) Supplier selection framework for strategic government procurement. PhD thesis, Universiti Teknologi Malaysia, Business & Advanced Technology Centre.

Masalamy @ Navaratnam, Visvan (2005) A survey of demolition works in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Kim Aik (2005) Survey on electronic procurement implementation in Malaysia construction companies. Masters thesis, University Technology Malaysia, Faculty of Civil Engineering.

Rahmat, Nor Abidah (2005) Swa-perlanggaran fabrik menggunakan gabungan pepohon-r dan lengkungan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Bahari, Haznita Rose (2005) Synthesis and characterization of ketohydrazone ligands and its complexes with aluminium (III) and zinc (II) as potential emitting material in oled. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Siregar, Sri Hilma (2005) Synthesis and methods development of adsorbents based on poly (styrene-divinylbenzene) derivatives for solid phase extraction of aromatic compounds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Taib, Nurul Izza (2005) Synthesis of poly(vinyl acetate)-silylated mesoporous Si-MCM-41 nanocomposite and its characterization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Ngai, Mun Hong (2005) Synthesis of several bisabolane sesquiterpenoids from xanthorrhizol isolated from C. Xanthorrhiza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Bahruji, Hasliza (2005) Synthesis of zeolite ferrierite from rice husk ash, characterization and activity towards friedel-crafts acylation for the formation of p-methoxypropiophenone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Mohamed, Azmi (2005) Synthesis, characterization and activity of AL-MCM-41 catalyst for hydroxyalkylation of epoxides. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sarjadi, Mohd. Sani (2005) Synthesis, characterization and application of zirconiamodified poly(styrene-divinyl benzene) adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Lee, Soon Chai (2005) Synthesis, characterization and catalytic properties of titanium containing silica aerogel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Sainal, Rahimi (2005) System integration in research project management : case study of research management center (RMC), UTM/ Rahimi Sainal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Ali, Marlina (2005) Tahap penguasaan kemahiran berfikir kritis di kalangan pelajar pendidikan fizik di Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Education.

Choo, Shinn Chei (2005) Technoeconomical analysis of a residential photovoltaic vapour compression air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Ahmad Idil (2005) Teknik-teknik mengenalpasti sela masa senyap dalam sistem pengecaman suara. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Ahmad, Rohanin (2005) Theory and implementation of gradient-based modifications of a model-reality differences algorithm for solving nonlinear optimal control problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Wan Nik, Wan Mohd. Norsani (2005) Thermal And Rheological Properties Of Palm Based Oil As Hydraulic Fluid. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Mohd. Yusof, Norfadzlia (2005) Time series modeling and designing of artifical neural network (ANN) for revenue forecasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Yunus, Rozetta (2005) Tindakan pengambil alihan projek perumahan terbengkalai kajian kes di negeri Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Shaaya, Sharifah Azwa (2005) Traffic engineering IP/GMPLS over WDM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Mustakim, Fajaruddin (2005) Treating hazardous locations at federal route 50. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Madon, Zulkifly (2005) The understanding of contract documentation in project implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goh, Bee Min (2005) The use of adsorbents in the reduction of petrol volatile organic compound (VOC) emissions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty Of Civil Engineering.

Mohamad, Musfa (2005) The use of limestone aggregate in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Manaf, Mohammed Suhaimee (2005) The use of protein from palm kernel meal in diets of seabass (lates calcarifer). Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Woo, Lai Leng (2005) Using genetic algorithm with directed mutation in solving timetabling problems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Tay, Cheng San (2005) Using micro genetic algorithm for solving scheduling problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Omer Alsaghir, Albashir Ali (2005) Utilization of synthetic aperture radar (SAR) data for ship detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kudus, Baharuddin (2005) Variation orders in transmission projects of Tenaga Nasional Berhad. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajah, Avinash (2005) Very large scale integrated circuit (VLSI) of a neurohardware processor implementing the kohonen neural network algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Rajah, Avinash (2005) VLSI Design of a neurohardware processor implementing the Kohonen Neural Network algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Tan, Yu Chai (2005) Warping behaviour of cantilever steel beam with openings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Talib @ Harun, Juhaizah (2005) Waste auditing implementation system (WAIS) version 1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering .

Thanapalasingam, Vynavi (2005) Water quality assessment of Sungai Skudai river system through the analyses of heavy metals in water, aquatic plant and sediment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

M. Masilamani, M. Poobalan (2005) Web-based assessment of information systems services quality in Malaysian government agencies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Choon, Kwai Mui (2005) Web-based unit and instructor evaluation system (UIES). Masters thesis, Universiti Teknologi Malaysia, Faculty Of Computer Science & Information Systems.

Man Singh, Harjit Kaur (2005) Zeolite-supported transition metal catalysts to enhance the ozonation of aqueous phenol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.