Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 400.

A

A. Aregia, Tarek Abdelhadi (2010) Computerized welding process selection and parameter determination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Hamid, Huzaimi (2010) Design, fabrication and testing of a semi-automatic welding fixture for circumferential joining cylinders using MIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd Aziz, Azhar and Mohd. Ghazali, Normah and E. M., Tokit (2010) Wood combustion behaviour in a fixed bed combustor. In: AIP Conference Proceedings, 2010, Kuala Lumpur, Malaysia.

Abd Kadir, Mohammed Rafiq and M. Y., Baharuddin (2010) Finite element study on the micromotion of cementless total hip arthroplasty. In: IFMBE Proceedings, 2010, Singapore.

Abd Kadir, Mohammed Rafiq and M. Y., Baharuddin (2010) Finite element study on the stability of cementless acetabular cup. In: IFMBE Proceedings, 2010, Singapore.

Abd Rani, Mat Rebi and A. R., Ismail and M. H. M., Haniff and B. M., Deros and Z. K. M., Makhbul and N. K., Makhtar (2010) The optimization of environmental factors at manual assembly worstation by using taguchi method. Journal of Applied Sciences, 10 (13). 1293 - 1299. ISSN 1812-5654

Abd. Halim, Shahrizal (2010) Performance evaluation of nitrogen gas-assisted laser cutting on 316L austenitic stainless steel plate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Latif, Ainullotfi and Tamin, Mohd. Nasir and Koloor, S. S. R. (2010) Mechanics of composite delamination under flexural loading. In: 8th International Confernec on Fracture and Strength of Solids, 7-9 June 2010, Kuala Lumpur.

Abd. Malik, Adi Maimin (2010) Aerodynamic characteristics of wing of WIG catamaran vehicle during ground effect. WSEAS Transactions on Fluid Mechanics, 5 (3). 196 - 205.

Abd. Malik, Adi Maimun and Jameei, Saeed and Priyanto, A. and Sidik, N. A. C. (2010) Influence of twin hull geometry  on aerodynamics characteristics of WIG Catamaran duing ground effect. In: WSEAS, Application of Computer engineering, 23-25 March. 2010, Pulau Pinang.

Abd. Malik, Adi Maimun and Priyanto, Agoes and Scully, C. S. (2010) Effect of fins on manoeuvrability of A LNG vessel. In: The 5th Asia Pacific Workshop on Marine Hydrodynamics (APHydro 2010), 1-4 July 2010, Osaka Prefecture University, Osaka, Jepun.

Abd. Rahman, Muhammad Riza (2010) Numerical simulation and wind tunnel measurements of lateral aerodynamic characteristics on simplified automotive model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rani, Mat Rebi and A. R., Ismail and M. Y. M., Yusof and K., Sopian and Z. K. M., Makhbul and N. K., Makhtar (2010) Optimizing humidity level and illuminance to enhance worker performance in an automotive industry. Journal of Applied Sciences, 10 (14). 1389 -1396. ISSN 1812-5654

Abd. Rani, Mat Rebi and A. R., Ismail and M. Y. M., Yusof and N. K., Makhtar and B. M., Deros (2010) Optimization of temperature level to enhance worker performance in automotive industry. American Journal of Applied Sciences, 7 (3). 360 - 365. ISSN 1546-9239

Abdolahi, Ahmad (2010) High speed electroplating of nickel over stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdolahi , Hamed (2010) Effects of annealing on structure and magnetic properties of semiconductors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azliza (2010) Development of a ducted horizontal axis marine current turbine rotor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Ghafar, Alimi (2010) Optimizing crushing processing parameters of oil palm shell charcoal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Kadir, Aini Zuhra and Xua, Xun and Hämmerle, Enrico (2010) Virtual machine tools and virtual machining-a technological review. Robotics and Computer-Integrated Manufacturing, 27 (3). pp. 494-508. ISSN 0736-5845

Abdul Kadir, Mohammed Rafiq (2010) Biomechanics of a lumbar section after disc arthoplasty. European Journal of Scientific Research, 39 (1). 22 - 28.

Abdul Kadir, Mohammed Rafiq and Abd. Aziz, Azian and Arezoodar, Ali Fallahi and Hussain, Fitriyah and Zulkifly, Ahmad Hafiz and Sa'at, Azlin (2010) Preliminary study on the design of high flexion knee implant for total knee arthroplasty for Malaysian population. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Alizadeh, Mina and Salanha, Saturnino and Baharudin, Azmi and Abdul Razak, Mohammad (2010) Biomechanical simulation of burst fracture of l1 with thoracolumbar rods and screws. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor.

Abdul Kadir, Mohammed Rafiq and Hussain, Fitdriyah and Zulkifly, Ahmad Hafiz and Sa'at, Azlin and Abd. Aziz, Azian (2010) Anthropometric measure of the development of implants for total knee arthroplasty. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor Bahru.

Abdul Kadir, Mohammed Rafiq and Kamsah, Nazri and Idrose, Al Hamzee (2010) Biomechanics of a lumbar section after disc arthroplasty. European Journal of Scientific Research, 39 (1). 22-28.

Abdul Kadir, Mohammed Rafiq and Ochsner, Andreas and A., Syahrom (2010) Finite element analysis of idealised unit cell cancellous structure based on morphological indices of cancellous bone. Medical & Biological Engineering & Computing, 48 (5). 497 - 505. ISSN 0140-0118

Abdul Kadir, Mohammed Rafiq and Raja Izaham, Raja Mohd. Aizat and Abdul Rashid, Abdul Halim (2010) Stability evaluation of wedge plate and tomofix plate for open wedge high tibial osteotomy. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor.

Abdul Kadir, Mohammed Rafiq and Raja Izaham, Raja Mohd. Aizat and Al-Jefri Muslim, Darhaysham (2010) Biomechanical analysis of locking compression plate (lcp) for fracture fixation of tibial oblique fracture. In: 40th Malaysian Orthopaedic Association AGM / Annual Scientific Meeting, 20-22 May 2010, The Zone Regency Hotel, Johor.

Abdul Malik, Mohd. Maarif (2010) Modeling of dynamic response of desktop computer’s motherboard due to drop impact. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Nurul Ataillah and Ahmad, Robiah (2010) Biomechanical study and analysis on human motion using piezoelectric sensor for scavenging energy. Jurnal Mekanikal (31). pp. 30-45. ISSN 0127-3396

Abdul Wahid, Mazlan (2010) Effect of free stream turbulence on NOx and soot formation in turbulent diffusion CH4-air flames. international Communications in Heat and Mass Transfer, 37 (6). 611 - 617.

Abdul Wahid, Mazlan and Ardani, Mohd. Ibthisham (2010) Characteristics of impinging reacting jet flow on flat surface. In: AIP Conference Proceedings, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and M. Z., Ahmad Faiz and M. Saqr, Khalid and U., Haffis (2010) Single pulse detonation study of natural gas. In: Fluids Mechanics and Heat & Mass Transfer 2010, 22-27 July 2010, Corfu Island, Greece.

Abdul Wahid, Mazlan and M. Z. A., Faiz (2010) Swirling lean-premixed reacting flow. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and M. Z. A., Faiz and B., Rosnadiah (2010) The cellular structure of LPG reacting fluid. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and M. Z. A., Faiz and M., Norzawani (2010) Stabilization of reacting fluid by bluff body. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Mohd. Sies, Mohsin (2010) Experiments on combustion kernel growth in gaseous explosions. In: 10th Asian International Conference On Fluid Machinery, 21–23 October 2009, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and M. H., Ujir and H., Afifi (2010) Suitability of using the accelerometer for impulse measurement of a pulse combustion tube. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Abdul Wahid, Mazlan and Saqr, Khalid M. and Faiz, Ahmed and Kassem, Hassan and Sies, Mohsin (2010) Transient characteristics of C3H8/O2 turbulent mixing in a hypersonic pulse detonation engine. In: The 9th WSEAS International Conference on Applications of Computer Engineering (ACE 10), 23-25 Mac 2010, Bayview Beach Resort, Pulau Pinang.

Abdullah, Arman Shah (2010) Effect of pretreatment parameters on cobalt removal and surface roughness of tungsten carbide prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abraham, Arimokwu (2010) Numerical simulation of standing wave in an acoustic chamber. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Abd Rahim (2010) Analysis of a simple dics brake model using eigenvalue approach. In: 3rd Regional Conference on Noise, Vibration and CVomfort (NVC), 2010, 28-30 June 2010.

Abu Bakar, Abd Rahim and Romain , Szlapka and Azman, Mohd. Nurfairuz and Effandy, Effandy (2010) Experimental investigation of drum brake sequal. In: 3rd Regional Conference in Noise, Vibration and Comfort (NVC) 2010, 26-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Harujan, W. M. M. W. and Abd. Ghani, B. and Saw, C. L. (2010) Suppression of disc brake squeal through structural modifications : numerical approach. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010, 28-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Ishak, M. R. and Mohd. Taib, J. (2010) Theoretical investigation of vehicle rollaway. In: International Conference On Sustainable Mobility 2010, 1-3 Dec 2010, Kuala Lumpur.

Abu Bakar, Abd. Rahim and Jamaludin, M. R. and Rahman, R. A. (2010) Suppression of disc brake squeal through structural modifications : experimental approach. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010, 28-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Md. Zain, Mohd Zarhamdy and Dehkordi, S. M. H. and Md. Yusop, N. (2010) Stability analysis of a simple disc brake model using eigenvalue approach. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC ) 2010, 28-30 June 2010, Putrajaya.

Abu Bakar, Abd. Rahim and Ouyang, Huajiang and Chiing Khaia, Lee and Abdullah, Mohd. Shahrulizam (2010) Thermal analysis of a disc brake model considering a real brake pad surface and wear. International Journal of Vehicle Structures & Systems , 2 (1). pp. 20-27. ISSN 0975-3060

Abu Bakar, Tuty Asma and Rahman, M. and Dowling, D. P. and Stokes, J. and Hashmi, M. S. J. (2010) Mechanical performance of the annealed NiTi Shape Memory Alloy coating onto 316L stainless bio-steel. Defect and Diffusion Forum, 297 . 365 - 369. ISSN 1662-9752

Adnan, Fadzilah (2010) Work improvement at an engine assembly line at car manufacturing plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adnan, Nazrul Hamizi (2010) Design and development of a portable onion peeler machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afrinaldi, Feri and Mat Saman, Muhamad Zameri and Mohamed Shaharoun, Awaluddin (2010) EDAS: software for end-of-life disassembly analysis. International Journal of Sustainable Design, 1 (3). 257 . ISSN 1743-8284 (Print); 1743-8292 (Electronic)

Afrooz, Iman Eslami (2010) Numerical investigation of composite materials with short fibers made of carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahamed, Ahmad Fauzi (2010) Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahdash, Abdelsalam I. S. (2010) Design of impressed current cathodic protection for steel immersed in freshwater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Fauzi and Hudha, Khisbullah and Imaduddin, Fitrian and Jamaluddin, Hishammudin (2010) Modelling, validation and adaptive pid control with pitch moment rejection of active suspension system for reducing unwanted vehicle motion in longitudinal direction. International Journal of Vehicle Systems Modelling and Testing (IJVSMT), 5 (4). pp. 312-345. ISSN 1745-6444

Ahmad, Norhayati (2010) The study on the micro-pits location on the extrusion die surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Norhayati and H., Sueyoshi (2010) Properties of Si3N4-TiN composites fabricated by spark plasma sintering by using a mixture of Si3N4 and Ti powders. Ceramics International, 36 (2). 491 -496. ISSN 0272-8842

Ahmad, Norhayati and Sueyoshi, Hidekazu (2010) Densification and mechanical properties of electroconductive Si3N4- based composites. In: 2nd ISESCO International Workshop and Conference on Nanotechnology Kuala Lumpur, Malaysia., 25-27 Jan 2010, Kuala Lumpur, Malaysia.

Ahmad, Robiah (2010) Development of nutrient solution mixing process on time-based drip fertigation system. In: 4th Asia Modelling Symposium, AMS2010, 26-28 May 2010, Kota Kinabalu, Malaysia.

Ahmad, Robiah and Abd. Rahim, Abd. Rahman and Hussein, Mohamed and M. Samsuri, Saiful Farhan (2010) Identification and modeling of environment climates inside naturally ventilated tropical greenhouse. In: Asia Modelling Symposium 2010 (AMS 2010), 2-6 May 2010, Kota Kinabalu, Sabah.

Ahmad, Robiah and Mohd. Nor, Mohamad Fitri (2010) Parameter estimation of nonlinear discrete-time dynamic systems using genetic algorithm. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 97-120. ISBN 978-983-52-0545-3

Ahmad, Zaini (2010) Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading. international Journal of Impact Engineering, 37 (5). 475 - 488.

Ahmad , Nurul Huda (2010) Finite element simulation of preforated hollow sphere composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Bakir, Azman (2010) Characteristics of motion errors of 3–Axis CNC vertical milling machines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahrari, Ayoob (2010) Application of design of experiment technique in the nickel-chromium electroplating process on WC-Co substrate prior HFCVD diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Mohd. Nizam (2010) Performance evaluation of wire electrode discharge machining (WEDM) On Inconel 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alir , Kartini (2010) The effects of musculoskeletal disorder on drivability among compact car drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alizadeh , Mina (2010) Biomechanical evaluation of spine posterior rigid fixations : a finite element study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ang, Liqi (2010) Simulation of sequencing rules in a five-similar-machine job shop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ani, Farid Nasir and Mohamad Nor, Noruzaima (2010) Energy index for palm oil processing in oil palm mills. International Journal of Quality and Innovation, 1 (2). pp. 112-123. ISSN 1756-6975 (Print); 1756-6983 (Electronic)

Anuar, Azman (2010) Investigation of laser cutting parameters on surface quality of stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arshad Adam, Salema and Ani, Farid Nasir (2010) Microwave pyrolysis of oil palm fibres. Jurnal Mekanikal : An International Journal (30). pp. 77-86. ISSN 0127-3396

As’arry, Azizan and Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus and Kazi, Suhail (2010) Development of experimental rig for human hand tremor in postural condition. International Journal of Human Factors Modelling and Simulation, Inderscience .

Azman, Azri (2010) Performance evaluation of different process conditions when hard turning ASSAB 760. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azraie, Salahuddin (2010) Numerical simulation of heat transfer in blood vessels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Baharanchi , Ahmadreza Abbasi (2010) Simulation of turbulent swirling multiphase flow inside a pressure -swirl atomizer using volume of fluid model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bahari, Adli (2010) Numerical solution of elastohydrodynamic lubrication with non-newtonian fluid flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behnam , Sarah (2010) Development of biomechanical risk assessment technique in patient handling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Boo, Nan Shing (2010) Interfacial reactions between lead- free solders and electroless nickel/ immersion gold (ENIG) surface finish. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Che Ani , Mohd. Norzaimi (2010) Implementations of lean production system in manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidek, Nor Azwadi (2010) Virtual investigation of plume behavior from a heated eccentric annulus cylinder. In: Recent Advances And Applications Of Computer Engineering - Proceedings Of The 9Th Wseas International Conference (ACE 10) , 2010, Penang, Malaysia.

Che Sidek, Nor Azwadi and A. R. M., Rosdzimin and S. M., Zuhairi (2010) Study of plume behaviour two heated cylinders at high Rayleigh number using lattice Boltzmann method. In: AIP Conference Proceedings, 2010, Kuala Lumpur, Malaysia.

Che Sidek, Nor Azwadi and Idris, M. S. (2010) Mesoscale numerical approach to predict macroscale fluid flow problems. Journal of Applied Sciences, 10 (15). 1511 - 1524. ISSN 1812-5654

Che Sidek, Nor Azwadi and Irwan, M. A. M. (2010) Macro and mesoscale simulations of free convective heat transfer in a cavity at various aspect ratios. Journal of Applied Sciences, 10 (3). 203 -208. ISSN 1812-5654

Che Sidek, Nor Azwadi and M. A. M., Irwan (2010) Simplified mesoscale lattice boltzmann numerical model for prediction of natural convection in a square enclosure filled with homogeneous porous media. WSEAS Transactions on Fluid Mechanics, 5 (3). 186 - 195. ISSN 1790-5087

Che Sidek, Nor Azwadi and M. S., Idris (2010) Finite different and lattice boltzmann modelling for simulation of natural convection in a square cavity. International Journal of Mechanical and Materials Engineering, 5 (1). 80 - 86. ISSN 1823-0334

Che Sidek, Nor Azwadi and Mohd. Yasin, Mohd. Fairus and Samion, Syahrullail (2010) Virtual study of natural convection heat transfer in an inclined square cavity. Journal of Applied Sciences, 10 (4). 331 -336. ISSN 1812-5654

Che Sidek, Nor Azwadi and Nik Izual, N. I. (2010) Lattice boltzmann numerical scheme for the simulation of natural convection in an inclined square cavity. WSEAS Transactions on Mathematics, 9 (6). 417 - 426. ISSN 1109-2769

Che Sidek, Nor Azwadi and S. A., Osman (2010) Lattice BGK computational method for solving natural convection heat transfer from a heated non-concentric annulus cylinder. In: 2010 2nd International Conference on Computer Engineering and Applications, ICCEA 2010, 19-21 March 2010, Bali Island, Indonesia.

Che Sidek , Nor Azwadi and M. A., Mussa and S., Abdullah and N., Muhamad (2010) Cubic-interpolated-pseudo-particle lattice Boltzmann method for simulation of natural convection heat transfer in an enclosure with different aspect ratios. In: 2010 The 2nd International Conference on Computer and Automation Engineering, 2010, Singapore.

Che Sidik, Nor Azwadi (2010) An accurate numerical method to predict fluid flow in a shear driven cavity. International Review of Mechanical Engineering (IREME), 4 (6). 719 - 725.

Che Sidik, Nor Azwadi (2010) LB numerical prediction of natural convection heat transfer in an inclined square enclosure. In: Proceeding, 19th International Conference on the Discrete Simulation of Fluid Dynamics (DSFD 2010), 5-9 July 2010, Rome, Italy.

Che Sidik, Nor Azwadi (2010) Numerical study of droplet dynamics on solid surface. In: International Conference Applied physics and Mathematics (Peringkat Antarabangsa), 7-10 May, 2010, Kuala Lumpur.

Che Sidik, Nor Azwadi (2010) Simplified mesoscale porous media model for natural convective heat transfer in a square geometry. In: International Conference on Applications of Computer Engineering (ACE ’10) (Peringkat Antarabangsa), 23-25 March 2010, Pulau Pinang.

Che Sidik, Nor Azwadi and Abdul Wahid, Mazlan and K. M., Saqr (2010) Theoretical notes on the mathematical modelling of gaseous detonations using boltzmann equation. Journal of Applied Sciences, 10 (14). 1476 -1480. ISSN 1812-5654

Che Sidik, Nor Azwadi and Fudhail, M. (2010) Numerical Simulation of shear driven square cavity using enhanced meshing system. In: Proceeding, Malaysian Technical Universities Conference on Engineering and Technology, 26 May, 2010, Kuantan, Malaysia.

Che Sidik, Nor Azwadi and Fudhail, M. and Rody, M. (2010) Modeling of droplet motion on horizontal plane by using lattice boltzmann numerical scheme. In: roceeding, International Conference on Fundamental and Applied Sciences, 15-16 June 2010, Kuala Lumpur.

Che Sidik, Nor Azwadi and Ibrahim, N. I. N. (2010) Mesoscale simulation of natural convection in an inclined square enclosure. In: Proceeding, WSEAS, Application of Computer engineering, 23-25 March. 2010, Pulau Pinang.

Che Sidik, Nor Azwadi and Ibrahim, N. I. N. (2010) Mixed convection in a 2-d enclosure with sinusoidal side wall temperature. In: Proceeding, 19th International Conference on the Discrete Simulation of Fluid Dynamics (DSFD 2010), 5-9 July 2010, Rome, Italy.

Che Sidik, Nor Azwadi and Idris, M. S. (2010) Numerical investigation of 2D lid-driven cavity flow by the non-uniform finite different method. In: Proceeding, National Conference in Mechanical Engineering for Research and Postgraduate Studies, 26 May, 2010, Kuantan.

Che Sidik, Nor Azwadi and Mohd. Zin, Mohd. Rody (2010) Modeling of dynamics of droplet using the lattice boltzmann method. International Journal of Mechanical and Materials Engineering, 5 (2). 276 - 281. ISSN 1823-0334

Che Sidik, Nor Azwadi and Munir, M. F. and Zahir, H. M. and Musthafah, M. T. and Rody, M. (2010) Numerical simulation of shear driven square and triangular cavity by using lattice Boltzmann scheme. In: Proceeding, World Academy of Science, Engineering and Technology,, September 2010, Holland.

Che Sidik, Nor Azwadi and Nik Ibrahim, Nik Izual (2010) Numerical simulation of natural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Che Sidik, Nor Azwadi and Nor Hamizan, M. S. and Ammar, N. M. (2010) Assessment of lattice boltzmann simulation scheme in predicting two-phase (Solid-Fluid) flow. Jurnal Mekanikal (31). pp. 11-16. ISSN 0127-3396

Che Sidik, Nor Azwadi and Rody, M. (2010) Modelling of droplet spreading falling by using lattice Boltzmann method. In: Proceeding, World Engineering Congress, 2-9 August 2010, Kuching, Sarawak.

Che Sidik, Nor Azwadi and Sujatmoko, Agus (2010) Mesoscale computational approach for shear driven cavity flow. In: The 2nd International Conference on Computer Engineering and Applications (ICCEA 2010), 19 -21 June 2010, Bali, Indonesia.

Cherraghizanjani, Alireza (2010) Development of measurement and behavior classification in tremor patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chia, Chon Yue (2010) Performance evaluation of diamond cutting tools when ultra precision grinding spherical part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chong, Kuan Eng (2010) Technology entrepreneur development at graduate training in Malaysia institute of higher learning. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Chong , Ban Hwa (2010) Sustainable furniture design concept. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ch’Ng Emily, Huey Ling (2010) Musculoskeletal disorders among offshore-structure fabrication yard workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

D

Darus, Amer Nordin and Y. Y., Fatt (2010) Secondary flows in curved rectangular ducts with diminishing cross section. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

E

Elia, Zulkifli (2010) Performance evaluation of lightning protection design software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Esfroshani, Mahdi Ramezanzadeh (2010) Analytical method for noise reduction of tire using wave propagation approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Eslami Harandi, Shervin (2010) The effect of calcium content and forging parameters on the properties of biodegradable MG-CA alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Etminan, Payam (2010) Design and development of diamond grinding wheel for ultra precision applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

F

Fallahiarezoodar , Ali (2010) Design and kinematic analysis of high flex knee implant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farsadi, Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes wav. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farsadi , Morteza (2010) Numerical investigation of composite materials reinforced with carbon nanotubes waviness. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fitra Lestari, Fitra Lestari (2010) Developing system information technology on planning demand and supply. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fouladinejad, Nariman (2010) Visual database design for driving simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fouladinejad , Nima (2010) Intelligent traffic flow simulation system on a small scale environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G

Gan, Teik Kun (2010) Decision making for capacity planning in a make-to-order company using mixed integer programming. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghosh, Pradip and Yusop, M. Zamri and Satoh, Syunsaku and Subramanian, Munisamy and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2010) Transparent and flexible field electron emitters based on the conical nanocarbon structures. Journal of the American Chemical Society, 132 (12). pp. 4034-4035. ISSN 0002-7863

Golrang, Mehdi (2010) Design for recycling methodology for rapid manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

H

Halim , Shamsul Azwan (2010) Simulation of plastic injection moulding part using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haminudin, Nor Faizah (2010) Center pressure for bio-based lubricant in elastohydrodynamic lubrication of rectangular conjuction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Esah (2010) Effect of cathodic arc PVD parameters on roughness of TiN coating on steel substrate. Current Applied Physics, 10 (2). 471 - 474.

Hamzah, Esah and M., Ali and I. A., Qazi and M. R. M., Toff (2010) Growth defects and surface roughness in TiN-coated tool steel at various N2 gas flow rates using cathodic arc PVD technique. Materials Science Forum, 636 (637). 965 - 970. ISSN 1662-9752

Haque, K. M. A. and Hussain, M. S. and Alam, S. S. and Islam, S. M. S. (2010) Synthesis of nano-nickel by a wet chemical reduction method in the presence of surfactant (SDS) and a polymer (PVP). African Journal of Pure and Applied Chemistry, 4 (5). pp. 58-63. ISSN 1996-0840

Harudin , Nolia (2010) Preventive maintenance improvement at epoxy cure operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemi Dehkordi , Sayed Mahdi (2010) Friction induced vibration and its prevention using active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashemiyan, Zahra (2010) Develop single frequency in bioelectric impedance analysis device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Hashim, Mohd. Hanifah (2010) Development of energy harvesting device using piezoelectric material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim , Ahmad Safwan (2010) Roll reduction device for small fishing vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heidari , Milad (2010) Development of elbow prosthesis for total elbow arthroplasty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hermawan, Hendra and D., Dube and D., Mantovani (2010) Degradable metallic biomaterials for cardiovascular applications. In: Metals for Biomedical Devices. Woodhead Publishing Limited, Oxford, United Kingdom, pp. 379-404. ISBN 978-1-84569-434-0

Hosseini, S. M. H. and Ochsner, Andreas and M., Merkel and T., Fiedler (2010) Predicting the effective thermal conductivity of Perforated Hollow Sphere Structures (PHSS). In: Current Trends in Chemical Engineering. Studium Press LLC, India, pp. 131-151. ISBN 1933699752

Hosseini , Nima Babazadeh (2010) Simulation of microchannel heat sink with hotspot(s). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husain , Mohamad Fazli (2010) Microbiology influenced corrosion of carbon steel and stainless steel by bacterium, pseudomonas aeruginosa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, Fadi Faris (2010) Effect of strontium modification and and AL-TI-B grain refiner on microstructure and properties of cast LM6 alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, M. S. and Haque, K. M. A. (2010) Synthesis of nanoaggregated nickel particles by a chemical process. Materials Technology: Advanced Performance Materials, 25 (5). pp. 289-291. ISSN 1066-7857

Hussain, Mohammad Sakhawat (2010) Electroforming a process for macro/nano-manufacturing. Int J of Nanomanufacturing, 14 (1/2/3/). 324 - 333.

Hussain, Mohammad Sakhawat (2010) Nano-mechanical characterization of nanocrystalline ni directly plated on aluminium. In: Nanotech Malaysia 2010, International Conference on Enabling Science & Technology , 1-3 December 2010, KLCC, Kuala Lumpur, Malaysia.

Hussain, Mohammad Sakhawat (2010) Syntheis of nano-crystalline semi-conductor materials by bottom-up and top-down approaches. In: Bangladesh Chemical Congress 2010, 33rd Chemical Conference of Bangladesh Chemical Society, 10 -12 Decemeber 2010.

Hussain, Mohammad Sakhawat (2010) Synthesis and characterization of aggregated nano-cobalt particles by a bottom up approach. In: Nanotech Malaysia 2010, International Conference on Enabling Science & Technology , 1-3 December 2010.

Hussain, Mohammad Sakhawat (2010) Synthesis of advanced Ni-Cr alloys by high temperature diffusion heat treatment. In: MS&T Annual Meeting (Materials Science and Technology) , 17-22 October 2010.

Hussain, Mohammad Sakhawat and Anamoul Haque, Kaz Mohammad and Ghihab, Abdul Rahman (2010) Nano-sized agglomerated Ni particles synthesized by a phase transformation method. International Journal of Nanoparticles, 4 (1). 33 - 44. ISSN 1753-2507

Hussain, Mohammad Sakhawat and Hezaveh, Hadi and Fazali, Alireza and Esmaeli, Elahe (2010) Experimental invstigation on rheology of nano-partcles dispersed in paraffin. In: Nanotech Malaysia 2010, International Conference on Enabling Science & Technology , 1-3 December 2010, KLCC, Kuala Lumpur, Malaysia.

Hussain, Mohammad Sakhawat and Haque, K. M. A. (2010) Synthesis of nano-sized nickel particles by a bottom-up approach in the presence of an anionic surfactant and a non-ionic polymer. Journal of Scientific Research, 2 (2). pp. 313-321. ISSN 2070-0237 (Print) ; 2070-0245 (Electronic)

Hussein, Mohamed (2010) Modelling and control of a worm-like micro robot with active force control capability. In: World Congress on Engineering 2010, 30 June-2 July 2010 , London, United Kingdom.

Hussein, Mohamed and Che Kob, Mohd. Salman and Tawi, Kamarul Baharin and Supriyo, Bambang and Ariyono, Sugeng (2010) Electro-Mechanical Friction Clutch (EMFC) controller development for automotive application. In: World Congress on Engineering 2010, 30 June-2 July 2010 , London, United Kingdom.

Hussin, M. H. and Abu Bakar, A. R. and Jamaluddin, M. R. and Szlapka, R. (2010) Effects of lining thickness on squeal in drum brake assembly: experimental investigations. Int. J. Vehicle Structures & Systems, 2 (2). 69 -73. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Hussin, Norasikin (2010) Occupational safety and health improvement at casting plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

Ibrahim, Alia (2010) Elastohydrodynamic lubrication for bio-based lubricants in rectangular conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Imran (2010) Design of a curry puff making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Norfaizem (2010) Effect of tool length on plain turning performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Mohd. Hasbullah (2010) Artificial neural networks to predict of liquidus temperature in hypoeutectic Al-Si cast alloys. Journal of Applied Sciences, 10 (24). 3243 - 3249.

Idris, Mohd. Hasbullah and R., Ahmad and M. Y., Hashim (2010) Design sensitivity analysis of squeeze casting process. In: 2010 The 2nd International Conference on Computer and Automation Engineering, ICCAE 2010, 2010, Singapore.

Idrus, Noriqman Hakimi (2010) Design and development of the oil expeller. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Mohd. Rozaimi (2010) Effect of cutting parameters on the surface integrity of ground AISI 1148 steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

J

Jafari, Sajjad (2010) Hydroxyapatite coating on metallic biomaterials prepared by sol-gel method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jafartayari, Saman (2010) Awareness of sustainable manufacturing practices in Malaysian manufacturers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahanabadi, Hossein (2010) Intelligent active force control of a human-like arm actuated by pneumatic artificial muscles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahangiri , Amirreza (2010) Investigation on A1-Mg2Si MMC TIG welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahwie , Nurasyikin (2010) Study on car body kit design in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaluddin, Hishamuddin (2010) Aerodynamic derivatives identification for ground vehicles in crosswind using neural network and PCA. International Journal of Vehicle Systems Modelling and Testing, 5 (1). 59 - 71.

Jamaluddin, Hishamuddin and Em, Poh Ping and Hudha, Hudha (2010) Hardware-in-the-loop simulation of automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Vehicle Safety, 5 (1). 35 - 59. ISSN 1479-3105

Jamaludin, Khairur Rijal and Muhamad, Norhamidi (2010) Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction. Advanced Materials Research, 83-86 . pp. 945-952. ISSN 1022-6680

Jaswadi, Farizana (2010) Experimental and finite element investigation of dynamic behavior of chassis-PCB assembly of electronic products. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

K

Kamaruddin, Aisyah Nabilah (2010) Mixed integer programming (mip) model for production scheduling in an automotive part company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kang, Boon Siang (2010) Quality improvement through implementation of poka yoke and six sigma methodology in thermal interface material coating industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khoei, Mohammadreza (2010) Supply chain management information system (SCMIS) a case study in vamco (Axle Manufacturing Factory). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

King Jye, Wong and B. F., Yousif and K. O., Low (2010) The effects of alkali treatment on the interfacial adhesion of bamboo fibres. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 224 (3). pp. 139-148. ISSN 1464-4207

King Jye, Wong and K. O., Low (2010) Influence of ball burnishing on surface quality and tribological characteristics of polymers under dry sliding conditions. Tribology International, 44 (2). 144–153. ISSN 0301-679X

Koleini, Shahriar (2010) The properties of hot rolled binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Krishnan, Subramaniam and Ahn, Sang-Hee and Lee, Choong-Won (2010) Design and development of a hydrogen-peroxide rocket-engine facility. Jurnal Mekanikal : An International Journal (30). pp. 24-36. ISSN 0127-3396

Kuan, Yew Wong and Behrouzi, Farzad and Chuen, Tse Kuah (2010) Supplier selection based on leagility : using fuzzy membership value. In: ICISE 2010 : International Conference on Industrial and Systems Engineering, 25-27 August 2010 , Singapore.

Kuan, Yew Wong and Chuen, Tse Kuah and Behrouzi, Farzad (2010) Application of data envelopment analysis to assess quality management efficiency. In: ICISE 2010 : International Conference on Industrial and Systems Engineering, 25-27 August 2010, Singapura.

Kuan, Yew Wong and Chuen, Tse Kuah and Behrouzi, Farzad (2010) A fuzzy-based model to measure supplier performance with lean attributes. In: Asia Modeling Syposium 2010 (AMS 2010), 26-28 Mei 2010, Kota Kinabalu, Sabah.

Kuan, Yew Wong and Chuen, Tse Kuah and Behrouzi, Farzad (2010) A review on Data Envelopment Analysis (DEA). In: AMS2010: Asia Modelling Symposium 2010 - 4th International Conference on Mathematical Modelling and Computer Simulation, 26-28 May 2010, Kota Kinabalu, Malaysia.

Kuan, Yew Wong and Wai, Peng Wong and Delgado-Hernandez, David Joaquin (2010) An investigation of knowledge management in an adhesive manufacturing company. In: 14th International Business Information Management Association (IBIMA) Conference, 23-24 June 2010, Istanbul, Turkey.

Kuan Yew, Wong and Komarudin, Komarudin (2010) Solving facility layout problems using flexible bay structure representation and Ant System algorithm. Expert Systems with Applications, 37 (7). 5523 - 5527. ISSN 0957-4174

Kuan Yew, Wong and U., Nirmal and B. K., Lim (2010) Impact behavior of short and continuous fiber-reinforced polyester composites. Journal Of Reinforced Plastics And Composites, 29 (23). 3463 - 3474. ISSN 0731-6844

L

Lai, Cing Xin (2010) Transient solution to fluid flow in cavity with stretched coordinae system using constrained interpolated profile navier stokes equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lani, Norziana (2010) High speed nickel plating on difficult to plate metal(Aluminium). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Li, Hong Juang (2010) Finite element modelling for a piezoelectric ultrasonic system. Measurement: Journal of the International Measurement Confederation, 43 (10). pp. 1387-1397. ISSN 0263-2241

Li, Hong Juang (2010) X-ray chest image reconstruction by Radon transform simulation with fan-beam geometry. Measurement, 43 (3). 447 - 453. ISSN 0263-2241

Li, Hong Juang and Ming, Ni Wu (2010) MRI brain lesion image detection based on color-converted K-means clustering segmentation. Measurement, 43 (7). 941 - 949. ISSN 0263-2241

Li, Hong Juang and Wu, Ming Ni (2010) Image noise reduction using Wiener filtering with pseudo-inverse. Measurement: Journal of the International Measurement Confederation, 43 (10). pp. 1649-1655. ISSN 0263-2241

Lim, Meng Hee (2010) Application of wavelet transform analysis for the diagnosis of blade faults in rotating machinery. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loghmanian, Sayed Mohammad Reza (2010) Structure optimization of dynamic system model using multi - objective genetic algorithm. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Loh, Chee Kin (2010) Simulation of natural convection heat transfer in an enclosed cavity using Constrained Interpolated Profile Navier-Stokes Equation (CIPNSE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical.

Low , Kok Wai (2010) Reliability of passive hull systems on floating production system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lv, Ya (2010) Development of simulation software for simulating the interactive control of manipulators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. S., Muhamad Zameri and A., Feri and Z., Norhayati and B. Jane, Gordon (2010) Strategic guidance model for product development in relationship with recycling aspects for automative products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063

M. S., Muhamad Zameri and M. S., Awaluddin (2010) Software for end-of-life disassembly analysis. Journal of Sustainable Design, 1 (3). 257 - 277. ISSN 1743-8284

M. Yusup, Eliza (2010) Evaluation of an active force control for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Madhloom Al-Khafaji, Ali Abdulhussain (2010) System identification of flexible plate structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahmod, Hamzah (2010) Design of a low cost concrete rooftile making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa and A., Noshadi and A., Zolfagharian (2010) Active force control of 3-RRR planar parallel manipulator. In: ICMET 2010 - 2010 International Conference on Mechanical and Electrical Technology, Proceedings, 2010, Singapore.

Mailah, Musa and Abu Bakar, Abdul Rahim and Hashemi-Dehkordi, S. M. (2010) Intelligent active force control with piezoelectric actuators to reduce friction induced vibration due to negative damping. International Review of Electrical Engineering , 4 (6). 1294 - 1305. ISSN 1827-6660

Mailah, Musa and Abu Bakar, Abdul Rahim and Hashemi-Dehkordi, S. M. (2010) Suppressing friction-induced vibration due to negative damping and mode coupling effects using active force control. Australian Journal of Basic and Applied Sciences, 4 (8). 3917 - 3933.

Mailah, Musa and Mat Darus, Intan Zaurah and A. R., Tavakolpour and O., Tokhi (2010) Self-learning active vibration control of a flexible plate structure with piezoelectric actuator. Simulation Modelling Practice and Theory, 18 (5). 516 - 532. ISSN 1569-190X

Mailah, Musa and Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Optimal placement of piezoelectric actuator for active vibration control of flexible plate. In: Asia Modelling Symposium 2010 : 4th Asia International Conference on Mathematical Modelling and Computer Simulation , 15-17 Jun 2010, KLCC, Kuala Lumpur.

Mailah, Musa and Mat Darus, Intan Zaurah and Safizadeh, Mohammad Reza (2010) Calculating the frequency modes of flexible square plate using finite element and finite difference methods. In: Asia Modelling Symposium 2010 : 4th Asia International Conference on Mathematical Modelling and Computer Simulation , 15-17 Jun 2010, KLCC, Kuala Lumpur.

Mailah, Musa and Md. Zain, Zarhamdy and Kazi, Suhail and As'arry, A. and Mailah, Musa and Hussain, M. (2010) Performance evaluation of smart glove applied to experimental rig to control human hand tremor for parkinson disease. In: World Scientific and Engineering Academy and Society (WSEAS), 23-25 Mac 2010, Bayview Beach Resort, Pulau Pinang.

Mailah, Musa and Varatharajoo, Renuganth and C. T., Wooi (2010) Two degree-of-freedom spacecraft attitude controller. Advances in Space Research, 47 (4). pp. 685-689. ISSN 0273-1177

Maimun, Adi and Setyawan, Donny and Islam, M. Rafiqul and Priyanto, Agoes and Jaswar, Jaswar (2010) Safety of a high speed passenger ferry in damaged condition. Journal of Applied Sciences, 11 . pp. 219-235. ISSN 1812-5654

Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (3). pp. 336-355. ISSN 1450-216X

Mat Darus, Intan Zaurah and Al-Khafaji, A. A. M. and Jamid, M. F. (2010) Neuro modelling of flexible plate structure rig for development of active vibration control algorithm. In: Asia Modeling Symposium 2010 : 4th Asia International Conferende on Mathematical Modelling & Computer Simulation, 26-28 May 2010, Borneo Island, Kota Kinabalu, Sabah.

Mat Darus, Intan Zaurah and Jamid, M. F. (2010) Development of a flexible plate structure rig for implementation of active vibration control algorithm. In: Proc. Of the asia Modelling Symposium 2010, (AMS2010), 26-28 May 2010, Kota Kinabalu, Sabah.

Mat Darus, Intan Zaurah and Jamid, M. F. and Tavakolpour, A. R. (2010) Vibration analysis of rectangular flexible thin plate. In: The 3rd International Conference on Intelligent and Advanced Systems (ICLAS 2010), 15-17 jun 2010, KLCC, Kuala Lumpur.

Mat Darus, Intan Zaurah and Lokaman, Zainul Aman (2010) Dynamic modelling of twin rotor multi system in horizontal motion. Jurnal Mekanikal (31). pp. 17-29. ISSN 0127-3396

Mat Darus, Intan Zaurah and Mailah, Musa and Tavakolpour, Ali Reza (2010) Genetic algorithm-based identification of transfer function parameters for a rectangular flexible plate system. Engineering Application of Artificial Intelligence, 23 (8). 1388 - 1397. ISSN 0952-1976

Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Natural Frequency Analysis Of All Edges Clamped Flexible Thin Plate. International Review of Mechanical Engineering (IREME), 4 (4). 433 - 440. ISSN 1970 - 8734

Mat Darus, Intan Zaurah and Safizadeh, M. R. (2010) Optimal location of sensor for active vibration control of flexible square plate. In: Proc. Of the 10th International Conference on Information Sciences, Signal Processing and their Applications (ISSPA2010), 10-13 May 2010, Kuala Lumpur, Malaysia.

Mat Dzahir, Mohd. Azwarie (2010) Remote control of hand arm robotic system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Dzahir , Mohd. Azuwan (2010) Development of assistive robotic arm for stroke rehabilitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Jusoh, Mazlan (2010) Surface integrity evaluation on titanium alloy after EDM machining using different graphite electrodes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Nuri @ Md. Din , Nur Rashid (2010) Numerical simulation of aerodynamics effect on an automotive side mirror. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Sahat, Idris (2010) A numerical analysis of two dimensional lid driven cavity flow using cubic interpolated pseudo-particle method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, Muhamad Zameri and Afrinaldi, Feri and Zakuan, Norhayati and Blount, Gordon and Goodyer, Jane and Jones , Ray and Jawaid, Ashraf (2010) Strategic guidance model for product development in relation with recycling aspects for automotive products. Journal of Sustainable Development, 3 (1). pp. 142-158. ISSN 1913-9063 (Print);1913-9071 (Electronic)

Mat Yajid, Muhamad Azizi and Bagshaw, H. and Mobus, G. (2010) In situ and ex situ transmission electron microscopy investigation of Cu-Al-Cu-Ti reactive metallic multilayer coatings. Journal Of Materials Research, 25 (6). 1196 - 1203. ISSN 0022-2461

Md. Daud, Mohd. Yusof and Lucas, Margaret and Jamaludin, Khairur Rijal and Anis, Samsol Faizal (2010) Analysis of surface deformation under static and ultrasonic compression of aluminium. In: Malaysian Powder Metallurgy & Malaysian Metallurgical Conference 2010, 22-23 November 2010, Pulau Pinang, Malaysia.

Md. Lazin @ Md. Lazim , Md. Norazlan (2010) Natural ventilation tropical greenhouse (nvtg) modeling and simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, Mohd. Zarhamdy (2010) Development of piezoelectric braille cell control system using microcontroller unit (MCU). Wseas Transactions on Circuits and Systems, 9 (6). 379 - 388.

Md. Zain, Mohd. Zarhamdy (2010) Dynamic analysis on noise and vibration study of flexible wiper blade system. Advanced Materials Research, 97101 . 4530 - 4536.

Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abd. Rahim and Md. Yusop, N. (2010) Stability analysis of simple disc brake model using analytical approach. In: The 4th World Engineering Congress 2010 : Engineering & Technology for Global Stability and Security, 2-5 August 2010, Kuching, Sarawak.

Md. Zain, Mohd. Zarhamdy and As’arry, Azizan and Kazi, Suhail and Mailah, Musa and Hussein, Mohamed and Abdullah, Mohd. Yunus (2010) Development of experimental-rig for human postural tremor behaviour. International Journal of Human Factors Modelling and Simulation, 1 (3). pp. 339-351. ISSN 1742-5549

Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and S., Kazi and A., As'arry (2010) Experimental implementation of smart glove incorporating piezoelectric actuator for hand tremor Control. WSEAS Transactions on Systems and Control, 5 (6). 443 - 453. ISSN 1991-8763

Md. Zain, Mohd. Zarhamdy and Yaacob, Mohd. Shafiek and Hussein, Mohamed and Abdullah, Mohd. Yunus and Musa, Abd. Rahman and Razaly, F. and Ajizan, N. H. (2010) Application of PIC microcontroller for controlling piezoelectric braille cell. In: The 9th WSEAS International Conference on Applications of Computer Engineering (ACE '10), 23-25 March 2010, Bayview Beach Resort, Pulau Pinang.

Mesuan, Mohd. Ariffin (2010) Simulation of metal stamping for panel front door inner part for new automotive model development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Milani , Kaveh (2010) Operational competitivness index for Malaysian container ports. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirshahi, Mohammad (2010) The properties of hot extruded binary magnesium calcium alloy for use as a biodegradable material within bone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Ahmad Dzia’Uddin (2010) Effect of process parameters on surface roughness produced by turning boring operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Mohd. Nazri (2010) Simulation and experimental study of vibration control using smart material for flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Ali Mohammed Sultan, (2010) Techno-economic analysis of compressed natural gas carrier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Nazari, Munira (2010) Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Jaafar, Mohammad Nazri and M. I., Rahim and M. H. B., Asril and R., Mantari (2010) Development of a small gas turbine combustor. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Wilayah Persekutuan, Malaysia .

Mohd Salleh, Zuan Azhary (2010) Heat stress on 500-660 mm pipe workers in oil rig jackets assembly welding works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Salleh, Zuliazura (2010) Analysis on the flow and pressure distribution for actual stenosis in trachea. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Zain, Azlan and Haron, Habibollah and Sharif, Safian (2010) Application of GA to optimize cutting conditions for minimizing surface roughness in end milling machining process. Expert Systems with Applications, 37 (6). pp. 4650-4659. ISSN 09574174

Mohd. Adib, Mohd. Azrul Hisham (2010) Analysis of blood flow into the main artery via mitral valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Azmi, Mohd. Irwan (2010) Numerical study of convective heat transfer and fluid flow through porous media. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Badri , Mohd. Najib (2010) Simulation of plastic injection moulding of family mould using moldflow and design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, Normah and Yaacob , Mohd. Shafiek and Darus, Amer Nordin and M. H., El-Fawal (2010) Thermoacoustic refrigerator's stack optimization. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Mohd. Isa @ Hamid, Mohd. Halimudin (2010) Performance evaluation of electrical discharge machine on titanium alloy using copper impregnated graphite electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohammad Shaiful Ashrul and Saharin, Sanisah (2010) Removal of NOx and CO from a burner system. Environmental Science & Technology, 44 (8). 3111 -3115. ISSN 0013-936X

Mohd. Jaafar, Mohammad Nazri and Kimsin, Intan Noryanah and Yamani Rahmat, Mohd Zaki and Wahab, Mohd Muzamil (2010) Atmospheric pressure burning rate studies on potassium based solid propellant. In: The 4th World Engineering Congress 2010 : Engineering & Technology for Global Stability and Security, 2-5 August 2010, Kuching, Sarawak.

Mohd. Jaafar, Mohammad Nazri and N. I., Kamarudin and M., Hanafi and A. R., Mantari (2010) Development of air supply system for gas turbine combustor test rig. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Mohd. Jaafar, Mohammad Nazri and Osman, Mohamed Seroleh and Rajo Mantari, Muhammad Hanafi Asril (2010) Investigation of combutor aerodynamic using radial swirler. In: The 4th World Engineering Congress 2010 : Engineering & Technology for Global Stability and Security, 2-5 August 2010, Kuching, Sarawak.

Mohd. Jaafar, Mohammad Nazri and R., Permatasari (2010) Emission characteristics of palm shell fuel in fluidized bed combustion. In: ICMEE 2010 - 2010 2nd International Conference on Mechanical and Electronics Engineering, Proceedings, 2010, Kyoto, Kansai, Japan.

Mohd. Jaafar, Mohammad Nazri and Y. A., Eldrainy and H. S., Aly and K. M., Saqr (2010) Augmentation of turbulence and mixing in gas turbine combustors by introducing unsteady effects. In: Proceedings of the 2010 International Conference on Mechanical, Industrial, and Manufacturing Technologies, MIMT 2010, 2010, Sanya, China.

Mohd. Jamir, Mohd. Ridzuan (2010) Experimental investigation of minimum quantity lubricant (MQL) in cold forward extrusion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Rohani, Jafri and Mohd. Yusof, Sha’ri and Mohamad, Ismail (2010) The development of a survey instrument for measuring a relationship between statistical process control success factors and performance. Jurnal Mekanikal : An International Journal (30). pp. 1-16. ISSN 0127-3396

Mohd. Samin, Pakharuddin (2010) Hybrid stability augmentation system-force control of semi-active suspension with magnetorheological damper. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Mohd. Samsuri, Saiful Farhan (2010) Modeling of environmental climates inside naturally ventilated tropical greenhouse. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Senusi, Shahrullizam (2010) Solar absorption thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sies, Mohsin (2010) Computations of shear driven vortex flow in a cylindrical cavity using a modified k-epsilon turbulence model. international Communications in Heat and Mass Transfer, 37 (8). 1072 - 1077.

Mohd. Sies, Mohsin and Abd. Wahid, Mazlan and Kassem, Hassan I. and Saqr, Khalid M. (2010) Ideal detonation characteristics of biogashydrogen and -hydrogen peroxide mixtures. In: Fluids Mechanics and Heat & Mass Transfer 2010, 22-27 July 2010, Corfu Island, Greece.

Mohd. Sies, Mohsin and K. M., Saqr and H., Ujir (2010) Whirling flames for fuel economy and low NOx combustion. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Mohd. Sies, Mohsin and Kassem, Hassan I. and Aly, Hossam S. and A.Wahid, Mazlan and Saqr, Khalid M. (2010) Performance of RANS turulence models in predicting strained flows in a curved duct. In: Fluids Mechanics and Heat & Mass Transfer 2010, 22-27 July 2010, Corfu Island, Greece.

Mohd. Yahya, Nur Hayati (2010) The effect of visual viewing geometry on computer monitor user. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yunus, Mohd. Yusri (2010) Software development of concurrent design for manufacturing process selection of plastic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusof, Noordin and Sharif, Safian and D., Kurniawan (2010) Hard machining of stainless steel using wiper coated carbide: tool life and surface integrity. Materials And Manufacturing Processes, 25 (6). 370 - 377. ISSN 1042-6914

Mohd. Yusof, Sha'ri (2010) Comparative study of TQM practices between Japanese and None-Japanese electrical and electronics companies in Malaysia: Survey Results. Total Quality Management & Business Excellence, 21 (12). 11 - 20.

Mohd. Yusoff, Sabariah (2010) Ergonomic assessment in an assembly plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusop, Mohd. Zamri (2010) Direct growth of carbon nanofibers on metal mesh substrates by ion irradiation method. Journal of Vacuum Science & Technology B, 28 (2). C2C9 - C2C12.

Mokhtar, Kamran (2010) Application of clad/unclad optical fiber in the corrosion studies of reinforced concrete rebars. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mozafari, Hamid and Abdi, Behzad and Ayob, Amran (2010) Optimization of composite plates based on imperialist competitive algorithm. International Journal on Computer Science and Engineering, 2 (9). pp. 2816-2819. ISSN 2229-5631 (Print); 0975-3397 (Online)

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Influence of thickness variation on the buckling load in plates made of functionally graded materials. European Journal of Scientific Research, 47 (3). pp. 422-435. ISSN 1450-216X

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Using imperialist competitive algorithm to find the optimum shape design of internally pressurized torispherical dome ends based on buckling pressure. International Journal of Engineering (IJE), 4 (5). pp. 338-356. ISSN 1985-2312 (Online)

Mozafari, Hamid and Ayob, Amran and Alias, Amran (2010) Verification of the thermal buckling load in plates made of functional graded materials. International Journal of Engineering (IJE), 4 (5). pp. 338-356. ISSN 1985-2312 (Electronic)

Mozafaria, Hamid and Hassanipour, Meysam and Ayob, Amran (2010) Investigation of thickness and thermal treatments on the deep drawing process for the aluminum plate. International Journal of Engineering Science and Technology, 2 (10). pp. 5915-5920. ISSN 0975-5462

N

N., Zakuan and S. M., Yusof and M. Z., Mat Saman and A. M., Shaharoun (2010) Confirmatory factor analysis of TQM practices in Malaysia and Thailand automotive industries. International Journal of Business and Managemen, 5 (1). pp. 160-175. ISSN 1833-3850 (Print); 1833-8119 (Electronic)

Nasir Ani, Farid and Salema, Arshad Adam (2010) Microwave induced pyrolysis of oil palm biomass. Bioresource Technology, 102 (3). pp. 3388-3395. ISSN 0960-8524

Niakan , Ali Asghar (2010) Lost foam casting of LM6-A1-Si cast alloy under pressure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Mu’Tasim, Muhammad Ammar (2010) Simulations of solid particle in a lid-driven cavity flow using Lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noh, Shahril (2010) Quality characteristics of thin-walled plastic injection parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nor Kamarudin, Khairol Sozana (2010) Polymeric membrane used in natural gas processing to separate carbon dioxide: the facing problems and solutions. Journal of Environmental Science and Engineering, 4 (1). pp. 25-32. ISSN 1934-8932

O

Ochsner, Andreas (2010) A lattice Monte Carlo analysis of thermal transport in phase change materials. Defect and Diffusion Forum, 297-30 . 154 - 161.

Ochsner, Andreas (2010) A lattice Monte Carlo analysis on thermal diffusion in syntactic hollow-sphere structures. Materialwissenschaft Und Werkstofftechnik, 41 (5). 283 - 286.

Ochsner, Andreas (2010) Plasticity of three-dimensional foams. In: Cellular and Porous Materials in Structures and Processes. CISM International Centre for Mechanical Sciences, 521 . Springer Vienna, New York, pp. 107-166. ISBN 978-3-7091-0296-1

Ochsner, Andreas and T., Fiedler and H. S., Kim and I. V., Belova and S. W., Sloan and G. E., Murch (2010) Elastic finite element analysis on cross-sections of random hollow sphere structures. Materialwissenschaft Und Werkstofftechnik, 41 (5). 250 - 256. ISSN 1521-4052

Ochsner, Andreas and C., Veyhl and I. V., Belova and G. E., Murch and T., Fiedler (2010) On the mesh dependence of non-linear mechanical finite element analysis. Finite Elements in Analysis and Design, 46 (5). 371 -378. ISSN 0168-874X

Ochsner, Andreas and Gromada, Magdalena and Mishuris, Gennady (2010) On the evaluation of mechanical properties from the axisymmetric tensile test. Archives Of Metallurgy And Materials, 55 (1). 325 -330. ISSN 1733-3490

Ochsner, Andreas and Hosseini, Seyed Mohammad Hossein (2010) Constitutive modeling of the mechanical behavior of trabecular bone - continuum mechanical approaches. In: Biomechanics of Hard Tissues: Modelling, Testing, and Materials. Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, Germany, pp. 159-191. ISBN 978-352-732-431-6

Ochsner, Andreas and Hosseini, Seyed Mohammad Hossein and Fiedler, Thomas (2010) Numerical prediction of the effective thermal conductivity of open- and closed-cell foam structures. Defect and Diffusion Forum, 297301 . 1210 - 1217. ISSN 1012-0386

Ochsner, Andreas and L. F. M., Da Silva (2010) Experimental engineering and applications. Experimental Mechanics, 50 (5). 561 - 561. ISSN 0014-4851

Ochsner, Andreas and L. F. M., da Silva (2010) Guest editorial. Journal Of Adhesion, 86 (56). 467 - 469. ISSN 0018-9480

Ochsner, Andreas and S. M. H., Hosseini and M., Merkel (2010) Numerical simulation of the mechanical properties of sintered and bonded Perforated Hollow Sphere Structures (PHSS). Journal Of Materials Science & Technology, 26 (8). 730 -736. ISSN 1005-0302

Ochsner, Andreas and Speich, M. and Merkel, M. (2010) Large deformation of core materials for sandwich panels. Materialwissenschaft Und Werkstofftechnik, 41 (5). 270 - 275. ISSN 1521-4052

Ochsner, Andreas and Y. S., Nechaev (2010) On physical nanoscale aspects of compatibility of steels with hydrogen and natural gas. Journal Of Nanoscience and Nanotechnology, 10 (2). 1398 -1413. ISSN 1533-4880

Osman, Kahar and Md. Sheriff, Jamaluddin and M. Z., Bahak and A., Bahari and Asral, Asral (2010) Numerical solution of hydrodynamics lubrications with non-newtonian fluid flow. In: 10th Asian International Conference On Fluid Machinery, 21–23 October 2009, Kuala Lumpur, Malaysia.

Osman, Kahar and Md. Sheriff, Jamaluddin and Zainal , M. F. and Matzin , A. N. and Asral, Asral (2010) Numerical analysis of flow and heat in variable angle slider bearing. In: 10th Asian International Conference On Fluid Machinery, 21–23 October 2009, Kuala Lumpur, Malaysia.

Osman, Kahar and R. P., Jong and M. S., Shariff (2010) Numerical dynamic simulation of optimized cross-flow heat exchanger with various refrigerants. In: 10th Asian International Conference On Fluid Machinery, 21–23 October 2009, Kuala Lumpur, Malaysia.

Othman, Norazila and Wan Ali, Wan Khairuddin (2010) Development of ammonium perchlorate plus aluminium base solid propellant. In: 10th Asian International Conference On Fluid Machinery, 2010, Kuala Lumpur, Malaysia.

Ourdjini, Ali and M., Karimian and M. H., Idris and K., Muthu (2010) Effect of flask vibration time on casting integrity, surface penetration and coating inclusion in lost foam casting of Al-Si Alloy. In: International Conference On Advances In Materials And Processing Technologies, Pts One And Two, 2010, Paris, France.

P

Poh, Ping Em and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2010) Automatic steering control for lanekeeping manoeuvre: outer-loop and inner-loop control design. International Journal of Advanced Mechatronic Systems, 2 (5/6). pp. 350-368. ISSN 1756-8412 (Print); 1756-8420 (Electronic)

Prawoto, Yunan (2010) Effect of pH and chloride concentration on the corrosion of duplex stainless steel. Arabian Journal For Science and Engineering , 34 (2C). 115 - 127.

Prawoto, Yunan (2010) Quantitative failure analysis using a simple finite element approach. Journal of Failure Analysis and Prevention, 10 (1). pp. 8-10. ISSN 1547-7029

Prawoto, Yunan and Jern, Phye Tan and Choon, Yong Loh (2010) Effect of microstructures and material compositions on blister formation. Materials Sciences and Applications, 1 (3). pp. 158-161. ISSN 2153-117X (Print); 2153-1188 (Electronic)

Prawoto, Yunan and M. Tajuddin, A. Moin (2010) Effect of microstructures on SCC of steel, field failure analysis case study and laboratory test result. In: Fourth International Conference on Engineering Failure Analysis, 4-7 Julai 2010, Churchill College, Cambrige, United Kingdom.

Prawoto, Yunan and Sumeru, K. and Wan Nik, W. B. (2010) Stress corrosion cracking of steel and aluminum in sodium hydroxide: field failure and laboratory test. Advances in Materials Science and Engineering, 2012 . pp. 1-8.

Priyanto, Agoes (2010) Prediction on floating LNG vessels in irregular waves. In: World Management of Floating LNG Project Conference 2010, 19-20 May 2010, Kuala Lumpur.

Priyanto, Agoes and Abd Malik, Adi Maimun and S., Jamei and I., Suharyanti (2010) A CFD study on aerodynamic characteristics of a middle wing for WIG catamaran during ground effect. In: 10TH ASIAN INTERNATIONAL CONFERENCE ON FLUID MACHINERY, 2010, Kuala Lumpur, Malaysia.

R

Rafati , Mahdi Zhaleh (2010) Numerical simulation of fluid flow and heat transfer in a trapezoidal microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rafiqul Islam, M. and Yaakob, Omar and Adi, Maimun and M., Yusof (2010) Computer simulation of current forces on motion of FPSO in irregular waves. Scientia Iranica (International Journal of Science and Technology), 17 (1). pp. 53-60. ISSN

Rajoo, S. and Martinez-Botas, R. F. (2010) Unsteady effect in a nozzled turbocharger turbine. Journal of Turbomachinery, 132 (3). 001-009. ISSN 0889-504X

Rajoo, Srithar (2010) Turbine performance studies for automotive turbochargers part two: unsteady analysis. In: 9th International Conference on Turbocharger and Turbocharging (Peringkat Antarabangsa), 19-20 May 2010, London.

Rajoo, Srithar and Romagnoli, A. and Martinez-Botas, R. F. (2010) Turbine performance studies for automotive turbochargers part one: steady analysis. In: 9th International Conference on Turbochargers and Turbocharging 19-20 May 2010, 19-20 May 2010, London.

Ramli, Mohd. Ridhwan (2010) Design of new interlocking bricks making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Yahaya (2010) Air compressors. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-1

Ramli, Yahaya (2010) Compressed air distribution. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-3

Ramli, Yahaya (2010) Conditioning of compressed air. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-2

Ramli, Yahaya (2010) Introduction to compressed air systems. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0728–0

Ramli, Yahaya (2010) Maintenance of compressed air systems. In: Introduction to compressed air systems. Penerbit UTM, Johor, n/a. ISBN 978-983-52-0728-4

Rasul, Mohamad Sattar and Ismail, Mohd. Yusof and Ismail, Napsiah and Rajuddin, Muhammad Rashid and Abd. Rauf, Rose Amnah (2010) Development of employability skills assessment tool for manufacturing industry. Jurnal Mekanikal : An International Journal (30). pp. 48-61. ISSN 0127-3396

Razali, Nadlene (2010) Determination of the flow curve of necking tensile specimen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rosdzimin,  A. R. M. and Zuhairi, S. M. and Che Sidik, Nor Azwadi (2010) Simulation of mixed convection heat transfer using lattice boltzmann method. International Journal of Automotive & Mechanical Engineering, 2 . pp. 130-143. ISSN 1985-9325 (Print); 2180-1606 (Online)

Rozali, Afzan (2010) Product design improvement through design for manufacture and assembly (DFMA) and theory of inventive problem solving (TRIZ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

S., Mansor and M., Passmore (2010) Measurement of a bluff body aerodynamic yaw moment magnification and damping using a dynamic wind tunnel facility. ACME Journal of Applied Mechanics, 78 (3). 001-006. ISSN 0021-8936

S. Alyami, Saad Rabia (2010) The effect of coconut dust addtion on the properties of green sand and investment casting moulds. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saad Elmunafi, Mohamed Handawi (2010) Performance evaluation of wiper coated ceramic tool when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Saaran, Idris (2010) Effect of different pretreatment parameters on silicon nitride substrate surface roughness prior to diamond deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadir, Sahba (2010) Investigation of fluid flow through cellular structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safari, Habiballah (2010) Effect of two-step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said Ali @ Syed Ali, Sharifah Aznee (2010) Analysis of slips and falls among workers at workplace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saleh, Alireza Tavakolpour (2010) Mechatronic design of intelligent active vibration control systems for flexible structures. PhD thesis, Universiti Teknologi Malaysia, Fakulti Kejuruteraan Mekanikal.

Salimnezhadghareziaeddini, Aida (2010) Information system in out-patient clinic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salimon , Norhidayah (2010) Optimum strategy for the implementation of a decentralized distribution network for industrialised building system (IBS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samion, Syahrullail and Bahak, Mohd. Zubil and Che Sidek, Nor Azwadi (2010) Experimental evaluation of palm oil as lubricant in cold forward extrusion process. International Journal of Mechanical Sciences, 53 (7). pp. 549-555. ISSN 0020-7403

Samion, Syahrullail and Che Sidik, Nor Azwadi and Osman, Shahrul Azmir (2010) Lattice boltzmann simulation of plume behavior from an eccentric annulus cylinder. International Journal of Mechanical and Materials Engineering, 5 (2). 129 - 135. ISSN 1823-0334

Samion, Syahrullail and Kamitani, S. and Nakanishi, K. (2010) Experimental evaluation of RBD palm olein as lubricant in cold metal forming. Jurnal Mekanikal (31). pp. 1-10. ISSN 0127-3396

Sari , Mehdi Mohammadzadeh (2010) Machinablity of aisih 13 tool steel when using the edm process with carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaari, Mohd. Rosmani (2010) Effect of edge preparation when hard turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahani , Pouria (2010) Implementation of composite bar and beam element into a commercial finite element code. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahri, Norsyarizan (2010) Development of a material handling system for catheter manufacturing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsuri, Siti Rahmah (2010) The effect of soil resistivity on corrosion behaviour of coated and uncoated low carbon steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sharif, Safian and Sudin, Izman and Tan, P. L. (2010) Roughness models for sanded wood surfaces. Wood Science and Technology, 46 . 1 -14. ISSN 0043-7719

Shayganpour, Amirreza (2010) Evaluation of significant factors in aluminum lost foam casting using doe approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Shirazi, Arash Nasrollahi (2010) Finite element simulation of three surgical treatments of distal radius intra-articular fracture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sidik, N. A. C. and Horng, N. C. and Mussa, M. and Abdullah, S. (2010) Simulation of rarefied gas flow in slip and transitional regimes by the lattice Boltzmann method. CFD Letters, 2 (2). pp. 66-74. ISSN 2180-1363

Sivalinggam, Thibagaran (2010) Yield improvement in glass manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soleimani, Mohammad (2010) Numerical and experimental investigation of synthetic biogas pulse combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sudin, Izman (2010) Anti-corrosive properties of natural honey on Al-Mg-Si alloy in seawater. Current Applied Physics, 10 (3). 923 - 929.

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohammad Nazim and Low, Yik Kuan and Eng, Kean Khor (2010) Effect of pickling process on adhesion strength of ti oxide layer on titanium alloy substrate. Advanced Materials Research, 146-47 . pp. 1621-1630. ISSN 1662-8985

Suid, Asmar (2010) Investigation of the microscopic deformation behavior and surface quality of austenitic stainless steel plate during holes piercing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, O. and Abd Kader, Ab Saman and Saharuddin, A. H. and Wan Nik, W. B. and Samo, K. B. (2010) Safety and environmental risk and reliability modeling process for sustainable inland water transportation. Journal of Marine Environmental Engineering , 9 (2). pp. 145-173. ISSN 1061-026X

Sulaiman , Mohd. Hafis (2010) Numerical simulation of cold forward extrusion for aluminum A 1100. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman , Syazana (2010) Process improvement at an engine assembly production line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulong@Zakaria, Zaeime (2010) Development of computer-aided materials and manufacturing process selection software using Boothroyd-Dewhurst methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suprayogi, Dedy Triawan (2010) Savonius rotor vertical axis marine current turbine for renewable energy application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

T

T., Fiedler and Belova, I. V. and Ochsner, Andreas and G., E. Murch (2010) Review on thermal lattice monte carlo analysis. In: Current Trends in Chemical Engineering. Studium Press LLC, USA, pp. 105-130. ISBN 193-369-975-2

Taghavisangdehi, Seyedhamed (2010) Effect of adding carbon nano tube into dielectric when edming titanium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Boon Ann (2010) The characteristics of impinging flame and its effects on the heat transfer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Joon Shyan (2010) Effects of interaction between strontium,antimony and titanium-boron on microstructure and properties of alumium alloy ai-11%(LM6). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Teh , Irene Hui Lynn (2010) Combustion and emission investigations of a diesel engine operating on palm oil derived fuels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Thien, Yung Fatt (2010) Control of piezoelectric actuator on human-like hand model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tholudin, Mat Lazim (2010) A mathematical model for predicting spray atomization characteristics in an Eulerian-Eulerian framework. International Communications in Heat and Mass Transfer, 37 (6). 618 - 623.

Tyurebekov, Yermek (2010) Experimental study of the flow forces in the hydraulic poppet valve. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

U

Udoncy Olugu, Ezutah and Kuan, Yew Wong and Mohamed Shaharoun, Awaludin (2010) A comprehensive approach in assessing the performance of an automobile closed-loop supply chain. Sustainability, 2 (4). pp. 871-889. ISSN 2071-1050

W

Wai, Peng Wong and Kuan, Yew Wong (2010) Intermediate measures consideration for a value chain or multistage system: an efficiency analysis using DEA approach. In: Advances in Measurement Systems. InTech, Rijeka, Croatia, 561-574 . ISBN 978-953-307-061-2

Wan Abu Seman, Sharifah Zainaf (2010) Integration of design for manufacturing and assembly (DfMA) and theory of inventive problem solving (TRIZ) for design improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Ali, Wan Khairuddin and Abdul Aziz , Amir (2010) Effect of oxidizer-fuel mixture ratio to the pressure exponent of ammonium perchlorate based composite propellant. In: The 2010 International Conference on Mechanical and Aerospace Engineering , 26 - 28 Nov. 2010, Kuala Lumpur.

Wan Ali, Wan Khairuddin and Abdul Aziz , Amir (2010) Effect of oxidizer-fuel ratio and chamber pressure to the burning characteristic of AP/HTPB/AL composite propellant. In: 2nd Conference on Engineering and Technology Education,, 10th August 2010, Kuching.

Wan Ali, Wan Khairuddin and Abdullah, Mohd. Alif Hafifi (2010) Review of usage of nitrocellulose in propellant. In: The 4th World Engineering Congress 2010 Engineering & Technology for Global Stability and Security, 2-5 August 2010, Kuching, Sarawak.

Wan Ali, Wan Khairuddin and Baharulrazi, Norfhairna and Mohd. Nor, Hussin (2010) Potential application of telechelic liquid natural rubber. In: 2nd Conference on Engineering and Technology Education,, 9th August 2010, Kuching.

Wan Ali, Wan Khairuddin and Farah Wahida, T. and Hafizah, N. and Azmin, F. (2010) The early development of solid rocket motor by ANGKASA-UTM. In: 2nd Conference on Engineering and Technology Education,, 7th August 2010, Kuching.

Wan Ali, Wan Khairuddin and Khanafiah, Khafri Izuan and Krishnan, Subramaniam (2010) Development of ceramic catalysts pack for decomposition of hydrogen peroxide. In: 2010 International Conference on Advances in Mechanical Engineering , 2-5 Dec.2010 , Shah Alam, Selangor, Malaysia.

Wan Ali, Wan Khairuddin and Mohd. Jaafar, Muhammad Nazri and Mamat, R. and Taib, M. Y. and Ibrahim, N. M. I. N. (2010) Combustion of high energetic materials. In: 2nd Conference on Engineering and Technology Education,, 6th August 2010, Kucing , Sarawak, Malaysia.

Wan Ali, Wan Khairuddin and Nambaraja, Kuberaraaj and Krishnan, Subramaniam (2010) Preparation and characterization of rocket grade hydrogen peroxide and rocket testing. In: 2010 International Conference on Advances in Mechanical Engineering, 2-5 Dec. 2010 , Shah Alam.

Wan Ali, Wan Khairuddin and Othman, Norazila and Krishnan, Subramaniam (2010) Design and testing of a 50N hydrogen peroxide monopropellant rocket thruster. In: 2010 International Conference on Advances in Mechanical Engineering, 2-5 Dec.2010, Shah Alam, Selangor, Malaysia.

Wan Ali, Wan Khairuddin and Sinnamitin, Mohammad Fadli (2010) The development of accelerometer calibrator. In: 2nd Conference on Engineering and Technology Education,, 5th August 2010, Kucing , Sarawak, Malaysia.

Wan Mahmud, Wan Musa (2010) An approach of rib resign for injection moulded characteristics of a hand phone casing part by using simulation of moldflow and design of experiments (doe). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Mohamad , Wan Zulfadli (2010) Recognition of cylindrical features from 2.5D and 3D prismatic model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, King Jye (2010) AN experimental study on the scratch characteristics of bamboo fibre-reinforced epdxy composite. Advanced Composites Letters, 19 (4). 140 - 145.

Wong, King Jye and B. F., Yousif and U., Nirmal (2010) Three-body abrasion on wear and frictional performance of treated betelnut fibre reinforced epoxy (T-BFRE) composite. Materials and Design, 31 (9). 4514 -4521. ISSN 0261-3069

Wong, King Jye and Nirmal, Umar and Lim, B. K. (2010) Impact behavior of short and continuous fiber-reinforced polyester composites. Journal of Reinforced Plastics and Composites, 29 (23). pp. 3463-3474. ISSN 0731-6844

Wong, King Jye and Zahi, S. and Low, K. O. and Lim, C. C. (2010) Fracture characterisation of short bamboo fibre reinforced polyester composites. Materials and Design, 31 (9). 4147 - 4154. ISSN 0261-3069

Wong, Kuan Yew (2010) Applying ant system for solving unequal area facility layout problems. European Journal of Operational Research, 202 . 730 - 746.

Wong, Kuan Yew (2010) Development of key performance measures for the automobile green supply chain. Resources, Conservation and Recycling, 55 (6). 567 - 579.

Wong, Kuan Yew (2010) A hybrid ant colony optimization algorithm for solving facility layout problems formulated as quadratic assignment problems. Engineering Computations, 27 (1). 117 - 128.

Wong, Kuan Yew and Yu, Cheng Wong (2010) A lean manufacturing framework for the Malysian electrical and electronics industry. In: ICMTA 2010 : International Conference on Management Technology and Applications, 10-12 Sept 2010], Singapore.

Wong, Yu Cheng (2010) A lean manufacturing implementation framework for the Malaysian electrica l and electronics industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong , Ling Shuang (2010) Improvement techniques for reducing human error. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong , Yi Kang (2010) Field and laboratory vibration analysis for structural degradation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Y

Yaacob, Mohd. Shafiek and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and F., Razaly and N. H., Ajizan and S. M., Saad (2010) User friendly system for the visually impaired in learning Al-Quran. WSEAS Transactions on Systems, 9 (6). 659 -668. ISSN 1109-2777

Yaacob, Mohd. Shafiek and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and Abdullah, Mohd. Yunus and Musa, Abd. Rahman and Razaly, F. and Ajizan, N. H. and Mad Saad, S. (2010) Dedicated graphical user interface system for the visually impaired users in learning Al-Quran. In: 9th WSEAS International Conference on Applications of Computer Engineering, 23-25 March 2010, Bayview Beach Resort, Pulau Pinang.

Yaakob, Omar (2010) Computational simulation of current forces on floating production storage and offloading in irregular waves. Scientia Iranica Transaction B-Mechanical Engineering, 17 (1 B). 53 - 60.

Yaakob, Omar (2010) Computer simulation studies on the effect overlap ratio for savonius type vertical axis marine current turbine. international Journal of Engineering, Transactions A: Basics, 23 (1). 79 - 88.

Yaakob, Omar and Abd. Kader, Abd. Saman and Abdul Hamid, Saharuddin (2010) Marine industry issues and challenges - education and R&D perspectives. In: 1st National Marine Industries Forum (NMIF), 23 Mac 2010, Kuala Lumpur.

Yaakob, Omar and Zainudin, Norazimar and Samian, Yahya and Abdul Malik, Adi Maimun and Palaraman, Robiahtul Adawiah (2010) Presentation and validation of remote sensing ocean wave data. International Journal of Research and Reviews in Applied Sciences (IJRRAS), 4 (4). pp. 373-379. ISSN 2076-734X

Yap Gabriel, Wei Phing (2010) Recognition of isolated prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yeong, Weng Harn (2010) Layout optimization and manning ratio improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yu, Zheng (2010) Recognition of interacting prismatic features from feature based models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusoff, Salahuddin (2010) Performance evaluation of carbide tool in end milling of medium density fiberboard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusoff , Mohd. Huzaifah (2010) Personal traits and emotions in behavioral patterns for young motorcyclis t riders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Z

Zakaria, Nazri Huzaimi (2010) Elastohydrodynamics lubrication for bio-based lubricants in elliptical conjunction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

This list was generated on Wed Oct 1 04:31:33 2014 MYT.