Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | E | F | G | H | I | J | K | L | M | N | R | S | T | W | Y | Z
Number of items at this level: 46.


Abdulwahid, R. T. and Abdullah, O. G. and Aziz, S. B. and Hussein, S. A. and Muhammad, F. F. and Yahya, M. Y. (2016) The study of structural and optical properties of PVA:PbO2 based solid polymer nanocomposites. Journal of Materials Science: Materials in Electronics, 27 (11). pp. 12112-12118. ISSN 0957-4522

Afrizal, Efi and Koto, Jaswar (2016) Study on development of ice-ship. In: Proceeding of Ocean, Mechanical and Aerospace -Science and Engineering- Isomase, 07 Nov, 2016.

Alwan, R. A. and Wahid, M. A. and Sies, M. M. and Yasin, M. F. M. (2016) Effects of air entry of swirling flameless combustion in a low NOx burner. International Review of Mechanical Engineering, 10 (2). pp. 87-94. ISSN 1970-8734

Amran, Ahmad Zulkhairie and Abdul Latiff, Zulkarnain and Nasution, Henry and Mohd. Perang, Mohd. Rozi and Mohd. Jamil, Hishammudin and Misseri, Mohd. Nazri (2016) Development and evaluation of an automotive air-conditioning test rig. Jurnal Teknologi, 78 (10-2). pp. 55-60. ISSN 0127-9696

Aparow, Vimal Rau and Hudha, Khisbullah and Megat Ahmad, Megat Mohamad Hamdan and Jamaluddin, Hishamuddin (2016) Development and verification of a 9-DOF armored vehicle model in the lateral and longitudinal directions. Jurnal Teknologi, 78 (6). pp. 117-137. ISSN 0127-9696

Athirah, Nadia Nordin and Mohd. Rohani, Jafri and Zainal Abidin, Norsheila and Raemy, Md. Zein (2016) Knowledge, attitude and practice of MSD injuries from Malaysian employer perspective. In: 4th Scientific Conference on Occupational Safety and Health, 14-17 Nov, 2016, Johor Bahru, Malaysia.


Elsiti, Nagwa Mejid and Mohd. Yusof, Noordin and Adam, Umar Alkali (2016) Fabrication of high aspect ratio micro electrode by using EDM. In: IOP Conference Series: Materials Science and Engineering, 12-14 Nov, 2015, Kuala Lumpur, Malaysia.


Farahany, S. and Ghandvar, H. and Nordin, N. A. and Ourdjini, A. and Idris, M. H. (2016) Effect of primary and eutectic Mg2Si crystal modifications on the mechanical properties and sliding wear behaviour of an Al–20Mg2Si–2Cu–xBi composite. Journal of Materials Science and Technology, 32 (11). pp. 1083-1097. ISSN 1005-0302

Fouladinejad, N. and Fouladinejad, N. and Abdul Jalil, M. K. and Mohd. Taib, J. (2016) Development of a surrogate-based vehicle dynamic model to reduce computational delays in a driving simulator. Simulation, 92 (12). pp. 1087-1102. ISSN 0037-5497


Galankashi, M. R. and Helmi, S. A. and Hashemzahi, P. (2016) Supplier selection in automobile industry: a mixed balanced scorecard-fuzzy AHP approach. Alexandria Engineering Journal, 55 (1). pp. 93-100. ISSN 1110-0168

Gholamzadeh Chofreh, A. and Goni, F. A. and Ismail, S. and Mohamed Shaharoun, A. and Klemeš, J. J. and Zeinalnezhad, M. (2016) A master plan for the implementation of sustainable enterprise resource planning systems (part I): concept and methodology. Journal of Cleaner Production, 136 . pp. 176-182. ISSN 0959-6526


Harun, M. Y. and Che Yunus, M. A. and Ismail, M. H. S. and Morad, N. A. (2016) A comparative investigation on the effect of thermal treatments on the mechanical properties of oil palm fruitlet components. Journal of the Taiwan Institute of Chemical Engineers, 60 . pp. 582-587. ISSN 1876-1070

Hassan, M. and Ani, F. N. and Syahrullail, S. (2016) Tribological performance of refined, bleached and deodorised palm olein blends bio-lubricants. Journal of Oil Palm Research, 28 (4). pp. 510-519. ISSN 1511-2780

Huang, Wei and Mohd. Samin, Pakharuddin and Tawi, Kamarul Baharin (2016) Feasibility investigation on novel concept of clutched train system to substitute for vehicular friction clutch. Journal of Advanced Mechanical Design, Systems and Manufacturing, 10 (1). ISSN 1881-3054


Imani Yengejeh, S. and Kazemi, S. A. and Ivasenko, O. and \xD6chsner, A. (2016) A refined finite element analysis on the vibrational properties of ideal and degenerated carbon nanostructures. Solid State Communications, 231-23 . pp. 36-42. ISSN 0038-1098

Isvandzibaei, M. R. and Jamaluddin, H. and Raja Hamzah, R. I. (2016) Vibration analysis of supported thick-walled cylindrical shell made of functionally graded material under pressure loading. JVC/Journal of Vibration and Control, 22 (4). pp. 1023-1036. ISSN 1077-5463

Izhan, I. M. and Syahrullail, S. and Yong, S. Y. and Nurul, M. A. (2016) Investigation of micro-pits formation on billet surfaces in plane strain extrusion. Jurnal Teknologi, 78 (10-2). pp. 39-45. ISSN 0127-9696


Jafari, H. and Hessam, H. and Shahri, S. M. G. and Assadian, M. and Shairazifard, S. H. P. and Idris, M. H. (2016) Characterizing sintered nano-hydroxyapatite sol-gel coating deposited on a biomedical Ti-Zr-Nb alloy. Journal of Materials Engineering and Performance, 25 (3). pp. 901-909. ISSN 1059-9495

Jannati, M. and Sutikno, T. and Idris, N. R. N. and Aziz, M. J. A. (2016) High performance speed control of single-phase induction motors using switching forward and backward EKF strategy. International Journal of Power Electronics and Drive Systems, 7 (1). pp. 17-27. ISSN 2088-8694


Kamaruzaman, Anis Farhan and Mohd. Zain, Azlan and Mohd. Yusof, Noordin and Najarian, Farhad (2016) Optimization of machining parameters for minimization of roundness error in deep hole drilling using minimum quantity lubricant. In: MATEC Web Of Conferences, 01-02 May, 2016, Phuket, Thailand.

Kamaruzaman, N. B. and Saat, A. (2016) Characterization of a short microchannel device for surface cooling. Jurnal Teknologi, 78 (8-4). pp. 25-30. ISSN 0127-9696

Khan, R. and Alderliesten, R. and Badshah, S. and Khattak, M. A. and Khan, M. S. and Benedictus, R. (2016) Experimental investigation of the microscopic damage development at mode i fatigue delamination tips in carbon/epoxy laminates. Jurnal Teknologi, 78 (11). pp. 33-40. ISSN 0127-9696

Kherbeet, A. S. and Mohammed, H. A. and Ahmed, H. E. and Salman, B. H. and Alawi, O. A. and Safaei, M. R. and Khazaal, M. T. (2016) Mixed convection nanofluid flow over microscale forward-facing step — effect of inclination and step heights. International Communications in Heat and Mass Transfer, 78 . pp. 145-154. ISSN 0735-1933 (In Press)


Lim, L. W. and Aziz, F. and Muhammad, F. F. and Supangat, A. and Sulaiman, K. (2016) Electrical properties of Al/PTB7-Th/n-Si metal-polymer-semiconductor Schottky barrier diode. Synthetic Metals, 221 . pp. 169-175. ISSN 0379-6779

Lu, Alex Chia Yang and Ani, Farid Nasir (2016) Controlled microwave-induced pyrolysis of waste rubber tires. International Journal of Technology, 7 (2). pp. 314-322. ISSN 2086-9614


Mare, Thierry and Estelle, Patrice and Halelfadl, Salma and Mohd. Ghazali, Normah (2016) Consideration of carbon nanotube-based nanofluid in thermal transfer. Jurnal Teknologi, 78 (8-4). pp. 41-48. ISSN 0127-9696

Muhammad, F. F. and Yahya, M. Y. and Ketuly, K. A. and Muhammad, A. J. and Sulaiman, K. (2016) A study on the spectroscopic, energy band, and optoelectronic properties of α,ω-dihexylsexithiophene/tris(8-hydroxyquinolinate) gallium blends; DH6T/Gaq3 composite system. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 169 . pp. 144-151. ISSN 1386-1425

Muhammad, Yasar Javaid and Ovinis, Mark and Fakhruldin, Mohd. Hashim and Abdul Malik, Adi Maimun and Yasser, M. Ahmed and Ullah, Barkat (2016) Effect of water current on underwater glider velocity and range. Jurnal Teknologi, 78 (10-4). pp. 47-53. ISSN 0127-9696


Nurul, M. A. and Syahrullail, S. and Teng, H. W. (2016) Alternative lubricants: study on palm oil-based lubricants in metal forming process. Journal of Oil Palm Research, 28 (1). pp. 93-103. ISSN 1511-2780


Rahim, S. Z. A. and Sharif, S. and Zain, A. M. and Nasir, S. M. and Mohd Saad, R. (2016) Improving the quality and productivity of molded parts with a new design of conformal cooling channels for the injection molding process. Advances in Polymer Technology, 35 (1). ISSN 0730-6679

Razak, D. M. and Syahrullail, S. and Sapawe, N. and Azli, Y. and Nuraliza, N. (2016) A new tribological approach on metal cup with optimized pits model using spark discharge machine. Particulate Science and Technology, 34 (2). pp. 209-216. ISSN 0272-6351

Rezaei-Dashtarzhandi, M. and Ismail, A. F. and Goh, P. S. and Wan Azelee, I. and Abbasgholipourghadim, M. and Ur Rehman, G. and Matsuura, T. (2016) Zeolite ZSM5-filled PVDF hollow fiber mixed matrix membranes for efficient carbon dioxide removal via membrane contactor. Industrial and Engineering Chemistry Research, 55 (49). pp. 12632-12643. ISSN 0888-5885


Shin, Chin Yung and Mohd. Ghazali, Normah (2016) CFD simulation of a plate heat exchanger with trapezoidal chevron. Jurnal Teknologi, 78 (8-4). pp. 19-24. ISSN 0127-9696

Sidik, N. A. C. and Samion, S. and Musa, M. N. and Muhammad, M. J. and Muhammad, A. I. and Yazid, M. N. A. W. M. and Mamat, R. (2016) The significant effect of turbulence characteristics on heat transfer enhancement using nanofluids: a comprehensive review. International Communications in Heat and Mass Transfer, 72 . pp. 39-47. ISSN 0735-1933

Singh, S. and Olugu, E. U. and Musa, S. N. and Mahat, A. B. and Wong, K. Y. (2016) Strategy selection for sustainable manufacturing with integrated AHP-VIKOR method under interval-valued fuzzy environment. International Journal of Advanced Manufacturing Technology, 84 (1-4). pp. 547-563. ISSN 0268-3768

Souf Aljen, Atef Salem Meftah and Abdul Malik, Adi Maimun and Rahimuddin, Rahimuddin and Mohamad, Noor Zairie (2016) Port capacity forecasting and the impact of the dredging works on port sea operations using discrete event simulation. Jurnal Teknologi, 78 (9-4). pp. 31-40. ISSN 01279696

Suhaimi, Mohd. Azlan and Mat Ghani, Firdaus and Mohd. Taib, Jamaludin and Md. Tap, Masine (2016) Generalization of mathematical representation for tool path based on boundary representation (BREPS) data structure. Jurnal Teknologi, 78 (1). pp. 159-167. ISSN 0127-9696


Thangavelu, S. K. and Ahmed, A. S. and Ani, F. N. (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 40 (12). pp. 1704-1711. ISSN 0363-907X


Wong, K. J. and Khoo, S. J. and Low, K. O. (2016) Influence of alkali treatment on the interfacial properties of bamboo/polyester composites. Recent Patents on Mechanical Engineering, 9 (3). pp. 247-254. ISSN 1874-477X

Wong, K. J. and Low, K. O. and Israr, H. A. and Tamin, M. N. (2016) Thickness-dependent non-Fickian moisture absorption in epoxy molding compounds. Microelectronics Reliability, 65 . pp. 160-166. ISSN 0026-2714


Y. M., Fadzli and Mohd. Yusof, Nor Fasiha and F. N., Norlisa (2016) Relationship between eye behaviour during conceptual stage design process and the level of creativity. In: First Multidisciplinary Conference on Mechanical Engineering (MCME2016), 29 Nov 2016, Johor, Malaysia.

Yousif, Q. A. and Mohd. Ghazali, N. and Zolpakar, N. A. and Novianto, S. and Pamitran, A. S. and Ahmad, R. (2016) Modeling of the minimized two-phase flow frictional pressure drop in a small tube with different correlations. Jurnal Teknologi, 78 (6-11). pp. 109-115. ISSN 0127-9696

Yusof, N. M. and Razavykia, A. and Farahany, S. and Esmaeilzadeh, A. (2016) Effect of modifier elements on machinability of Al-20Mg2Si metal matrix composite during dry turning. Machining Science and Technology, 20 (3). pp. 460-474. ISSN 1091-0344

Yusri, I. M. and Mamat, R. and Azmi, W. H. and Najafi, G. and Sidik, N. A. C. and Awad, O. I. (2016) Experimental investigation of combustion, emissions and thermal balance of secondary butyl alcohol-gasoline blends in a spark ignition engine. Energy Conversion and Management, 123 . pp. 1-14. ISSN 0196-8904


Zainal, M. T. and Mohd. Yasin, M. F. and Wahid, M. A. (2016) Investigation of the coupled effects of temperature and partial pressure on catalytic growth of carbon nanotubes using a modified growth rate model. Materials Research Express, 3 (10). ISSN 2053-1591

Zolpakar, Nor Atiqah and Mohd. Ghazali, Normah (2016) Optimization of a thermoacoustic refrigerator with an evolutionary algorithm approach. Jurnal Teknologi, 78 (9-2). pp. 19-24. ISSN 0127-9696

This list was generated on Sun Nov 19 03:35:17 2017 +08.