Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items at this level: 126.

A

Ab. Muis, Zarina (2012) Optimal solar-electricity generation for Iskandar Malaysia. In: 2nd Malaysian International Conference on Trends In Bioprocess Engineering (MICOTriBE 2012), 3-5 Jul 2012, Langkawi, Kedah.

Abang Zaidel, Dayang Norulfairuz and Meyera, Anne S. (2012) Biocatalytic cross-linking of pectic polysaccharides for designed food functionality: structures, mechanisms, and reactions. Biocatalysis And Agricultural Biotechnology, 1 (3). pp. 207-219. ISSN 1878-8181

Abd. Hamid, Mohd. Kamaruddin and Abu Bakar, Suraya Hanim and Wan Alwi, Sharifah Rafidah and A. Manan, Zainuddin (2012) Development of a new model-based integrated process design and control for heat exchanger networks. In: 26th Symposium of Malaysian Chemical Engineers (SOMchE-2012) in conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), 21-23 Nov 2012, Kota Kinabalu, Sabah.

Abd. Majid, Fadzilah @ Adibah (2012) Advance embryogenesis and embryotoxicity research using a low cost zebrafish system. In: Conference.

Abd. Majid, Fadzilah@Adibah (2012) Basic research: aetiology and pathogenesis. In: europerio7, 2012, Autria.

Abd. Manan, Zainuddin and Peng, YenLiew and Wan Alwi, Sharifah Rafidah and Sabev Varbanov, Petar (2012) A numerical analysis for total site sensitivity. In: 11th International Symposium on Process Systems Engineering, 15-19 Jul 2012, Singapore.

Abd. Rahman, Nur Syuhada (2012) Solubility model of palm oil extraction from palm fruit using sub-critical R134a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan and Yahya, Mohd. Yazid (2012) Electrically conductive nanocomposites of epoxy/polyaniline nanowires doped with formic acid: effect of loading on the conduction and mechanical properties. Nano, 7 (5). ISSN 1793-2920

Abu Bakar, Aznizam and Abdul Ghani, Siti Waqina and Kee, Wee Cheng (2012) Flexural and impact properties of poly (vinyl chloride) and acrylic-impact modified poly (vinyl chloride) composite filled with poly (methyl methacrylate) grafted to oil palm empty fruit bunches. International Journal Of Polymeric Materials, 61 . pp. 263-275. ISSN 0091-4037

Ahmad, Anuar (2012) Analysis of the fuel properties of palm oil waste for gasification. In: International Science Postgraduate Conference 2012 (ISPC 2012), 27-30 Nov 2012, Johor Bahru, Johor.

Ahmad, Arshad and Soo, Kim Kuang and Ripin, Adnan (2012) Bubble characteristics in ultrasonic-assisted equilibirum system. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT 2012).

Ahmad Sharif, Noor Fadzliana (2012) Preparation and characterization of epoxidized natural rubber (ENR-50) toughened polyamide 6/ halloysite nanotube composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Akos, N. I. and Mohamed, R. and Wahit, Mat Uzir and Yussuf, A. A. (2012) Comparative studies of mechanical properties of poly (e-Caprolactone) and poly (lactic acid) blends reinforced with natural fibers. In: Conference.

Ali, M. Abbas and Sayeed, M. Abu and Alam, M. Shahinur and Yeasmin, Mst. Sarmina and Mohal Khan, Astaq and Muhamad, Ida Idayu (2012) Characteristics of oils and nutrient contents of nigella sativa linn. and trigonella foenum-graecum seeds. Bulletin Of The Chemical Society Of Ethiopia, 26 (1). pp. 55-64. ISSN 1011-3924

Alias, Hajar and Ngadi, Norzita and Mohd Zainun, Zahira and Hamzah, Nurul Effah (2012) Rheology based on suspension containing titanium dioxide. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 July, 2012, Langkawi, Kedah.

Abang Zaidel, Dayang Norulfairuz and Chronakis, Ioannis S. and Meyer, Anne S. (2012) Enzyme catalyzed oxidative gelation of sugar beet pectin: kinetics and rheology. Food Hydrocolloids, 28 (1). pp. 130-140. ISSN 0268-005X

B

Bagheri, Mehdi and Ghaffar Borhani, Tohid Nejad and Zahedi, Gholamreza (2012) Estimation of flash point and autoignition temperature of organic sulfur chemicals. Energy Conversion And Management, 58 . pp. 185-196. ISSN 0196-8904

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab and Jamili, Ahmad (2012) Estimation of the effect of biomass moisture content on the direct combustion of sugarcane bagasse in boilers. International Journal of Sustainable Energy . ISSN 1478-6451

Balakrishnan, Harintharavimal and Masoumi, Iman and A. Yussuf, Abdirahman and Imran, Muhammad and Hassan, Azman and Wahit, Mat Uzir (2012) Ethylene copolymer toughened polylactic acid nanocomposites. Polymer-Plastics Technology And Engineering, 51 (1). pp. 19-27. ISSN 0360-2559

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bhatti, Inamullah (2012) Separation of carbon dioxide from natural gas by emulsion liquid membrane in rotating disc contractor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

C

Chang, Hui Quin (2012) Preparation of water-in-oil-in-water emulsions by repeated premix cellulose acetate membrane emulsification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chelliah, Kumutha (2012) Random mutagenesis of NS1 protein of influenza a H1N1 and docking of RNA aptamers to wild type and mutant NSI proteins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chong, Kok Chung and Lai, Soon Onn and Lee, K. M. and Ooi, Boon Seng (2012) A study of computational fluid dynamics on membrane module in membrane distillation. In: ICIMTR 2012 - 2012 International Conference on Innovation, Management and Technology Research. IEEE, New York, USA, pp. 174-178. ISBN 978-146730655-3

D

Dahalan, Farrah Aini (2012) Development and characterization of phototrophic aerobic granular sludge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, Noorol Jannah (2012) Carbon footprint calculator for a typical campus in Malaysia using life cycle assessment approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehbari, Nazila (2012) The effects of kenaf core on properties of polylactic acid biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehghani, Alireza (2012) Mechanical and thermal properties of Montmorillonite filled date palm leaf fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Deirram, Nayeleh (2012) Hydrolysis degradation of polycarbonate by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Devanai, Kannan (2012) Modification of polyethersulfone incorporated with polyvinylpyrrolidone - iodine via phase inversion and ultraviolet photo grafting for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

E

El-Hefian, Esam A. and Nasef, Mohamed Mahmoud and Khan, Rashid Atta and Yahaya, Abdul Hamid (2012) Characterization of aqueous solutions of mixture of chitosan and agar. Journal Of The Chemical Society Of Pakistan, 34 (1). pp. 127-130. ISSN 0253-5106

Elfagaih, Fawzi Mohamed Amin (2012) Catalytic performance and optimization of hydrodesulfurization and naphtha reforming for clean fuels production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Esawy, Mona A. and Mansour, Sara H. and Ahmed, Eman F. and Hassanein, Naziha M. and El-Enshasy, Hesham A. (2012) Characterization of extracellular dextranase from a novel halophilic bacillus subtilis NRC-B233B a mutagenic honey isolate under solid state fermentation. E-Journal Of Chemistry, 9 (3). pp. 1494-1510. ISSN 0973-4945

F

Faisal Ghazali, Mohd. Nazlee (2012) Cellulose degradation and electricity generation using Microbial Fuel Cell (MFC) by locally isolated gram negative bacillus. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 Jul 2012, Langkawi, Kedah.

Fauzi, Mohd. Iqram (2012) Growth of U937 cell in static and suspension culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Fun, Hoong-Kun and Tze, Shyang Chia and Mahesh, Padaki and Isloor, Arun M. and Ismail, Ahmad Fauzi (2012) (2E)-3-(6-Meth­oxy­naphthalen-2-yl)-1-[4-(methyl­sulfan­yl)phen­yl]prop-2-en-1-one. Acta Crystallographica Section E-Structure Reports Online, 68 (7). pp. 2277-2278. ISSN 1600-5368

G

Ghodsiyeh, Danial (2012) Optimization of machining parameters while wedming titanium alloy (T16AL4V). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

H

H'ng, Wei Chang (2012) Optimization of high cell mass cultivation of Rhizobium trifolii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamid, Yasin (2012) Mechanical, morphological and water absorption properties of waste Eurycoma Longifolia fiber/montmorillonite reinforced poly (vinyl chloride) hybrid composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamzah, Fazlena (2012) Simultaneous saccharification and fermentation of microwave - alkali pre-treated oil palm empty fruit bunch fiber for lactic acid production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasanudin, Redza Shah Azmeer (2012) Hydrogen production from catalytic steam reforming of acetic acid with nickel/cobalt supported by lanthanum (III) oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Optimization of large-scale rainwater harvesting system using mixed integer linear programming. In: 2nd International Conference on Water Resources (ICWR 2012), 5-9 Nov 2012, Langkawi, Kedah.

Hassan, Azman and Mohd. Yusoff, Noor Izyan Syazana and Abu Bakar, Aznizam (2012) Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites. Journal of Polymer Engineering, 32 . pp. 275-282. ISSN 0334-6447

Hassan, Mohamud Abukar (2012) Optimization of maximum demand of electrical energy system using distributed generation technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassim, Mimi Haryani and Hanafi, Noor Hasnizam (2012) Current status and future direction of inherently healthier design in Malaysia. Energy Procedia, 14 . pp. 1939-1944. ISSN 1876-6102

Hussein, Shwan Hassan (2012) Nystrom method for solving non-uniquely solvable interior Riemann-Hilbert problem on region with corners via integral equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

I

Ibnu Rasid, Elda Nurafnie (2012) Production of astaxanthin from microalgae. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Idham, Zuhaili and Muhamad, Ida Idayu and Mohd. Setapar, Siti Hamidah and Sarmidi, Mohd. Roji (2012) Effect of thermal processes on roselle anthocyanins encapsulated in different polymer matrices. Journal Of Food Processing And Preservation, 36 (2). pp. 176-184. ISSN 0145-8892

Idris, Ani (2012) Effect of photoperiod on the growth of unicellular microalgae nannochloropsis sp. In: The 2012 International Conference On Agriculturel, Food And Biological Engineering (ICAFBE 2012), 2012.

Idris, Ani and Bukhari, Attaullah and Mohd. Yusof, Noordin and Tan, K. G. (2012) A simultaneous cooling and dielectric heating: an advanced technology to improve the yield of lactides. In: Progress in Electromagnetics Research Symposium, PIERS 2012 Kuala Lumpur.

Idris, Ani and Bukhari, Attaullah and Mohd. Yusof, Noordin and Tan, K. G. (2012) A simultaneous cooling and dielectric heating: an advanced technology to improve the yield of lactides. Progress in Electromagnetics Research Symposium . pp. 141-145. ISSN 1559-9450

Idris, Ani and Misran, E. and Mohd. Yusof, Noordin (2012) Photocatalytic reduction of Cr(VI) by PVA-alginate encapsulated γFe 2O 3 magnetic beads using different types of illumination lamp and light. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2151-2156. ISSN 1226-086X

Ilbeygi, Hamid (2012) Electerochemical study of sulfonated poly ether ether ketone nanocomposite membrane for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

J

Jalalvandi, Esmat (2012) Polylactic acid/thermoplastic starch/montmorillonite nanocomposite : morphological, tensile properties, water absortion and degradation behavior. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Jalil, A. and Hashim, Haslenda and Hassim, Mimi Haryani and Anwar, J. and Sapiaa, N. A. H. (2012) Fugitive emission reduction using mixed integer linear programming. Energy Procedia, 14 . pp. 1870-1876. ISSN 1876-6102

Jaliliannosrati, Hamidreza (2012) Microwave assisted two step in situ method for biodiesel production from jatropha Curcas L. Seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jawaid, Mohammad and Abdul Khalil, H. P. S and Hassan, Azman and Elgorban, Abdallah (2012) Bi-layer hybrid biocomposites : chemical resistant and physical properties. Bioresources, 7 (2). pp. 2344-2355. ISSN 1930-2126

Jeng, Shiun Lim and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Hashim, Haslenda (2012) A review on utilisation of biomass from rice industry as a source of renewable energy. Renewable And Sustainable Energy Reviews, 16 (5). pp. 3084-3094. ISSN 1364-0321

Johari, Anwar and Ahmed, Saeed Isa and Hashim, Haslenda and Habib, Alkali and Mat, Ramli (2012) Economic and environmental benefits of landfill gas from municipal solid waste in Malaysia. Renewable And Sustainable Energy Reviews, 16 (5). pp. 2907-2912. ISSN 1364-0321

Johari, Anwar and Hashim, Haslenda and Taib, Rozainee and Mat, Ramli and Jusoh, Mazura (2012) A short note: effects of fludisation number and total air factor on the combustion of municipal solid waste of high moisture content in a fluidised bed. Applied Thermal Engineering, 36 . pp. 403-405. ISSN 1359-4311

Jonet, Mohd. Anuar (2012) Extracellular protein secretion optimization in Escherichia coli by signal peptide mutation and additive supplementation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jusoh, Emiliana R. and Ismail, M. Halim Shah and Abdullah, Luqman C. and Yusof, Robiah and Wan Abdul Rahman, Wan Aizan (2012) Crude palm oil as a bioadditive in polypropylene blown films. Bioresources, 7 (1). pp. 859-867. ISSN 1930-2126

K

Karim, Ainul Hakimah and Abd. Jalil, Aishah and Triwahyono, Sugeng and Kamarudin, Nur Hidayatul Nazirah and Muhamad Salleh, Nur Fatien and Ab Aziz, Muhammad Arif (2012) Adsorptive removal of methylene blue in aqueous solution onto mesostructured silica nanoparticles. In: The 5th International Conference on Postgraduate Education (ICPE-5 2012) , 18 & 19 December 2012 , Dewan Sultan Iskandar (DSI), Universiti Teknologi Malaysia ( UTM), Johor Bahru .

Kidam, Kamarizan and Hurme, Markku (2012) Analysis of equipment failures as contributors to chemical process accidents. Process Safety And Environmental Protection, 91 . pp. 61-78. ISSN 0957-5820

Kidam, Kamarizan and Hurme, Markku (2012) Design as a contributor to chemical process accidents. Journal Of Loss Prevention In The Process Industries, 25 (4). pp. 655-666. ISSN 0950-4230

L

Lai, Jau Choy (2012) Characterization and ageing studies of plasticized sago pith waste composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin (2012) A numerical technique for total site sensitivity analysis. Applied Thermal Engineering, 40 . pp. 397-408. ISSN 1568-4946

M

Madadi Ardekani, Sara (2012) Mechanical and thermal properties of Montmorillonite filled newspaper fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahmoudian, Shaya and Wahit, Mat Uzir and Muhammad Imran, Muhammad Imran and Ismail, Ahmad Fauzi and Balakrishnan, Harintharavimal (2012) A facile approach to prepare regenerated cellulose/graphene nanoplatelets nanocomposite using room-temperature ionic liquid. American Scientific Publications, 12 . pp. 5233-5239. ISSN 1533-4880

Mazila Ramli, Aizi Nor (2012) Molecular, enzymatic and structural analysis of a novel chitinase from Glaciozyma antarctica PI12 for cold adaptation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Salleh, Liza (2012) Bioactive compounds from quercus infectoria (manjakani) galls extract and their effects on antioxidant and antibacterial activities. In: Conference.

Md. Sarip, Mohd. Sharizan (2012) Subcritical water extraction of 6-gingerol and 6-shogaol from zingiber officinale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mili, Norlisa (2012) Formulation of emulsion liquid membrane for reactive dye removal from aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Moazeni, Nima and Mohamad, Zurina and Abdul Manan, Siti Najihah and Ngadi, Norzita (2012) Anticorrosion epoxy coating enriched with nanozinc and Montmorillonite (MMT). In: National Symposium on Polymeric Materials 2012 (NSPM 2012).

Mohamad, Zurina (2012) The effect of rice bran concentration on the properties of polyethylene/rice bran film. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Mohamad, Zurina (2012) The effects of carbon black contents in epoxy coating filled hybrid fillers on corrosion resistance. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Mohamad, Zurina (2012) Thermal properties and morphology of ethylene vinyl acetate/ epoxidized natural rubber/ halloysite nanotube (EVA/ENR-50/HNTs) nanocomposites. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Mohamad Fuzi, Siti Fatimah Zaharah and Mahadi, Nor Muhammad and Md. Jahim, Jamaliah and Abd. Murad, Abdul Munir and Abu Bakar, Farah Diba and Jusoh, Mazura and A. Rahman, Roshanida and Md. Illias, Rosli (2012) Development and validation of a medium for recombinant endo-β-1,4- xylanase production by kluyveromyces lactis using a statistical experimental design. Annals of Microbiology, 62 (1). pp. 283-292. ISSN 1590-4261

Mohamed Amin, Mohamed Afizal (2012) Development of sulfonation poly ether ether ketone membrane for microbial fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Muji, Siti Zarina (2012) Optical tomography for solid gas measurement using mixed projection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Nawi, Norazlina (2012) Encapsulation of anthocyanins from Ipomoea Batatas using microwave drying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Sueb, Mohd. Shafiq (2012) Efficient cultivation of Kluyveromyces Lactics in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohy Eldin, Mohamed S. and El Enshasy, Hesham and Hassan, Enas A. and M. Haroun, Bakry and Hassan, Mohamed (2012) Covalent immobilization of penicillin G acylase onto amine-functionalized PVC membranes for 6-APA production from penicillin hydrolysis process. Ii. Enzyme immobilization and characterization. Journal Of Applied Polymer Science, 125 (5). pp. 3820-3828. ISSN 0021-8995

Muhamad, Ida Idayu and Zahan, Norhayati (2012) Production of bio-fiber cement using formulated bacterial cellulose blends as additive. In: 3rd International Biotechnology and Biodiversity Conference & Exhibition (BIOJOHOR 2012).

Mustapha, Mahfuzah (2012) Shelf life of ready made paste using sorption isotherm and thermal colour degradation study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammad Rozali, Nor Erniza and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) Design of hybrid power systems with energy losses. Chemical Engineering Transactions, 29 . pp. 121-126. ISSN 1974-9791

N

N. K., Abbood and Z. A., Manan and S. R. W., Alwi (2012) A combined numerical and visualization tool for utility targeting and heat exchanger network retrofitting. Journal Of Cleaner Production, 23 (1). pp. 1-7. ISSN 0959-6526

Ng, Wendy Pei Qin and Lam, Hon Loong and Ng, Foo Yuen and Kamal, Mustafa and Lim, Joseph Heng Ee (2012) Waste-to-wealth: green potential from palm biomass in Malaysia. Journal of Cleaner Production, 34 . pp. 57-65. ISSN 0959-6526

Ng, Wendy Pei Qin and Ng, Rex T. L. and Lam, Hon Loong and Abdul Aziz, Mustafa Kamal and Ng, Ern Huay and Ng, Denny K. S. (2012) Biomass corridor synthesis for Malaysia green energy supply chain. Chemical Engineering Transactions, 29 . pp. 703-708. ISSN 1974-9791

Ngadi, Norzita and Alias, Hajar and Ishak, Siti Aktar (2012) Effects of feedstock and catalyst concentration on biodiesel production. Jurnal Teknologi, 57 . pp. 23-32. ISSN 0127-9696

Nilghaz, Azadeh and Wicaksono, Dedy H.B. and Gustiono, Dwi and Abdul Majid, Fadzilah Adibah and Supriyanto, Eko and Abdul Kadir, Mohammed Rafiq (2012) Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique. Lab On A Chip, 12 (1). pp. 209-218. ISSN 1473-0197

Noshadi, Imam and Saidina Amin, Nor Aishah and Parnasb, Richard S. (2012) Continuous production of biodiesel from waste cooking oil in a reactive distillation column catalyzed by solid heteropolyacid: optimization using response surface methodology (RSM). Fuel, 94 (1). pp. 156-164. ISSN 0016-2361

O

Othman, Norhayani and Jazrawi, B. and Mehrkhodavandi, P. and Hatzikiriakos, S. G. (2012) Rheology and melt fracture of poly(lactides). In: Annual Technical Conference - ANTEC, Conference Proceedings. Society of Plastics Engineers (SPE), Newtown, USA, pp. 1170-1174. ISBN 978-162276083-1

P

Phang Abdullah, Fatin Aliah and Mohd. Yusof, Khairiyah and Syed Hassan, Syed Helmi and Hassim, Mimi H. (2012) Engineering students' perception on learning through cooperative problem-based learning (CPBL) for the first time. In: 2012 ASEE Inaugural International Forum, 9 - 10 June 2012, Riverwalk San Antonio.

R

Rahaeifard, Mastooreh (2012) Isolation and optimization of biomass production of Trichoderma : a biological control agent against Ganoderma boninense. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rahmat, Abdul Razak and Lim, P. S. and Lee, Tin Sin and Soo, Tueen Bee and Tiam, Ting Tee (2012) The effect of chain extender on viscosity and mechanical properties of poly (buthylene terepthalate) blending with recycled poly(ethylene terephthalate)-glass fiber composite. Journal of Applied Science, 12 (3). pp. 296-300. ISSN 1812-5654

Ramli, Ros Azlinawati (2012) Synthesis and characterization of poly(acrylamide-co-acrylic acid)grafted poly(styrene-co-methyl methacrylate)microgels via semi batch emulsion polymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rasep, Zuraidah (2012) Removal of cadmium from waste water industry by using ferromagnetic photocatalyst gel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Razis Saidin, Mohammd Abdul and Ismail, Ahmad Fauzi and Mohd. Sanip, Suhaila and Goh, Pei Sean and Aziz, Madzlan and Tanemura, M. (2012) Controlled growth of carbon nanofibers using plasma enhanced chemical vapor deposition : effect of catalyst thickness and gas ratio. Thin Solids Films, 52 . pp. 2575-2581. ISSN 0040-6090

Riaz, Amjad (2012) Dynamic model of an energy efficient integrated steam reformer and methanol reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rohani, Behzad and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saqr, Khalid M. (2012) Comparison of eddy dissipation model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 384-391. ISBN 978-073541032-9

S

Sadighi, Sepehr and Ahmad, Arshad and Masoudian, Seyed Kamal (2012) Effect of lump partitioning on the accuracy of a commercial vacuum gas oil hydrocracking model. International Journal of Chemical Reactor Engineering, 10 . pp. 1-23. ISSN 1542-6580

Sadighi, Sepehr and Ahmad, Arshad and Shirvani, Mansoor (2012) Dynamic simulation of a pilot scale vacuum gas oil hydrocracking unit by the space-time CE/SE method. Chemical Engineering & Technology, 35 (5). pp. 919-928. ISSN 0930-7516

Saidina Amin, Nor Aishah and Misson, Mailin and Haron, Roslindawati and Ahmad Kamaroddin, Mohd. Fadhzir and Wan Omar, Wan Nor Nadyaini and Kok, Giap Haw (2012) Bio-oils and diesel like fuel derived from alkaline treated empty fruit bunch (EFB). International Journal of Biomass and Renewables, 1 (1). pp. 6-14. ISSN 2289-1692

Salleh, Intan Suhairi and Mohd. Yusof, Khairiyah and Zahedi, Gholamreza (2012) Fuzzy logic model for deodorizer troubleshooting in palm oil refining. International Conference on Control, Automation and Systems . pp. 374-378. ISSN 1598-7833

Saman, N. and Johari, K. and Mat, H. (2012) Effects of synthesis parameters towards morphological properties of silica Xerogels. Asian Journal Of Applied Sciences, 5 (4). pp. 247-251. ISSN 1996-3343

Sattar, A. and Rashid, M. and Mat, R. and Puji, L. (2012) A preliminary survey of air quality in Makassar City South Sulawesi Indonesia. Jurnal Teknologi (Sciences and Engineering), 57 (SUP. 1). pp. 123-136. ISSN 0127-9696

Sayid Abdullah, Sharifah Hanis Yasmin (2012) Treatment of simulated refinery based sulfidic spent caustic using photo-fenton oxidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shams, Gholamhossein (2012) Fingerprinting of effective phytochemicals from traditional diabetes herbal medication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shamsuri, Nur Afiqah Ahmad and Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Mat, Hanapi (2012) Biodegradation of dye using free laccase and sol-gel laccase. Jurnal Teknologi (Sciences and Engineering), 59 . pp. 39-42. ISSN 0127-9696

Sidik, Hayatu Umar (2012) Anaerobic co-digestion of palm oil mill effluent with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sy. Mohamad, Sharifah Fathiyah (2012) The susceptibility of APHIDS, Aphis gossypii Glover to lauric acid based natural pesticide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

T

Tajuddin, Rohana (2012) Effect of rice straw as sensitizer in the microwave-induced pyrolysis of plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Raymond and Lam, Han Loong and Kasivisvanathan, Harresh and Ng, Denny K. S. and Foo, Dominic Chwan Yee and Abdul Aziz, Mustafa Kamal and Hallaler, N. and Klemes, Jiri (2012) An algebraic approach to identifying bottlenecks in linear process models of multifunctional energy systems. Theoretical Foundations of Chemical Engineering, 46 (6). pp. 642-650. ISSN 0040-5795

W

Wai, Shin Ho and Hashim, Haslenda and Hassim, Mimi H. and Shamsuddin, Liyana (2012) Design Of biomass based distributed energy generation system through Electric System Cascade Analysis (ESCA). In: 2nd Malaysian International Conference on Trends In Bioprocess Engineering (MICOTriBE 2012), 3-5 July 2012, Langkawi, Kedah.

Wang, Jun Jie (2012) Optimization study on recovery hydrocarbons from pyrolysis oil using ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Y

Ya'aini, Nazlina (2012) Levulinic acid production from lignocellulosic biomass using hy zeolite supported chromium catalyst in ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ya'aini, Nazlina and Amin, Nor Aishah Saidina (2012) Catalytic performance of hybrid nanocatalyst for levulinic acid production from glucose. AIP Conference Proceedings, 1502 (1). pp. 442-453. ISSN 0094-243X

Yanwarizal, Yanwarizal (2012) Continuous individual plot curves technique for simultaneous targeting and design of a mass exchange network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yusof, Norhaniza and Ismail, Ahmad Fauzi and Rana, Dipak and Matsuura, Takeshi (2012) Effects of the activation temperature on the polyacrylonitrile / acrylamide-based activated carbon fibers. Materials Letters, 82 . pp. 16-18. ISSN 0167-577X

Z

Zahed, Gholamreza (2012) Design of biomass processing network for electricity generation using MINLP model : a case study on Iskandar Malaysia. In: The International Conference on Sustainable Development 2012 (ICSD 2012).

Zailani, Siti Nazrah (2012) Removal and recovery of reactive dye from aqueous solution using emulsion liquid membrane process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zainal Alam, Muhd. Nazrul Hisham (2012) Development of microbioreactor prototype for fermentation processes : challenges and limitations. In: Conference.

Zakaria, Zainul Akmar and Ahmad, Wan Azlina and Zakaria, Zainoha and Razali, Firdausi and Abdul Karim, Norsuhada and Md. Sum, Mohamad and Mohd. Sidek, Mohd. Saufi (2012) Bacterial reduction of CR(vi) at technical scale-the Malaysian experience. Applied Biochemistry And Biotechnology, 167 (6). pp. 1641-1652. ISSN 0273-2289

Zamzuri, Nurul Huda (2012) Production of hydrogen by steam reforming of glycerol over nickel supported catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2012) Development of a fuzzy system model for candidate-well selection for hydraulic fracturing in a carbonate reservoir. In: Society of Petroleum Engineers - Spe Oil and Gas India Conference and Exhibition 2012, Ogic - Further, Deeper, Tougher: The Quest Continues... Society of Petroleum Engineers, Richardson, Texas, pp. 148-172. ISBN 978-1-61399-192-3

This list was generated on Sat Nov 18 03:36:04 2017 +08.