Universiti Teknologi Malaysia Institutional Repository

Rheology and melt fracture of poly(lactides)

Othman, Norhayani and Jazrawi, B. and Mehrkhodavandi, P. and Hatzikiriakos, S. G. (2012) Rheology and melt fracture of poly(lactides). In: Annual Technical Conference - ANTEC, Conference Proceedings. Society of Plastics Engineers (SPE), Newtown, USA, pp. 1170-1174. ISBN 978-162276083-1

Full text not available from this repository.

Abstract

The wall slip and melt fracture behaviour of several commercial polylactides (PLAs) have been investigated. PLAs with molecular weights greater than a certain value were found to slip, with the slip velocity to increase with decrease of molecular weight. The onset of melt fracture for the high molecular weight PLAs was found to occur at around 0.2 to 0.3 MPa, depending on the geometrical characteristics of the dies. Addition of 0.5wt% of a poly(e-caprolactone) (PCL) into the PLA that exhibits melt fracture was found to be effective in eliminating and delaying the onset of melt fracture to higher shear rates.

Item Type:Book Section
Additional Information:Indexed by Scopus
Uncontrolled Keywords:caprolactone, geometrical characteristics, high molecular weight, melt fracture, poly lactide
Subjects:T Technology > TP Chemical technology
Divisions:Chemical Engineering
ID Code:35818
Deposited By: Fazli Masari
Deposited On:04 Dec 2013 01:05
Last Modified:04 Feb 2017 05:55

Repository Staff Only: item control page