Universiti Teknologi Malaysia Institutional Repository

Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 247.

Article

Jamaludina, K. R. and Muhamad, N. and Ab. Rahman, M. N. and Amin, S. Y. M. and Murtadhahadi, I and Ismail, M. H. (2008) Injection molding parameter optimization using the Taguchi method for highest green strength for bimodal powder mixture with SS316L in PEG and PMMA. Advances in Powder Metallurgy & Particulate Materials 2008, 1 . pp. 186-194.

Abdul Latif, Nur Hidayah and Nasir Ani, Farid and Hamdan, Halimaton (2009) The performance of a bench scale liquefaction of carbon dioxide. Jurnal Mekanikal (29). pp. 84-99. ISSN 0127-3396

Abdul Rani, Mat Rebi and Ismail, A. R. and Makhbul, Z. K. M. and Md. Deros, Baba (2009) Assessment of thermal comfort and optimization of environmental factors at automotive industry. European Journal of Scientific Research , 31 (3). pp. 409-423. ISSN 1450-202X

Abdul Talib, Hayati@Habibah and Ali, K. A. M. (2009) An overview of Malaysian food industry : the opportunity and quality aspects. Pakistan Journal of Nutrition, 8 (5). pp. 507-517. ISSN 1680-5194

Abu Hassan, Shukur (1998) Kaedah-kaedah proses pembuatan menghasilkan produk berasaskan bahan rencam (komposit) plastik bertetulangkan gentian kaca (GFRP). Jurnal Mekanikal, 1 (5). pp. 31-47. ISSN 0127-3396

Abu Hassan, Shukur and Ismail, Yob Saed and Mohd. Sam, Abd. Rahman (2009) Load sustained rig for bond durability study. Jurnal Mekanikal (28). pp. 16-27. ISSN 0127-3396

Abu Syukur, Syaimak and Md. Tap, Masine (2002) Data transfer between Cad system and RP system: a report. Jurnal Teknologi A (37A). pp. 37-46. ISSN 0127-9696

Ahmad, Sufizar and Muhamad, Norhamidi and Jamaludin, Khairur Rijal (2010) Characterisation of Titanium Foams Sintered at Different Temperatures Prepared by the Slurry Method. Sains Malaysiana, 39 (1). pp. 77-82. ISSN 0126-6039

Ahmad, Md. Fauzi and Mohd. Yusof, Sha'ri and Mohd. Yusof, Noordin (2007) Comparative study of quality practices between Japanese and non-Japanese based electrical and electronics companies in Malaysia: a survey. Jurnal Teknologi, 47 (A). pp. 75-89. ISSN 0127-9696 (Print); 2180-3722 (Electronics)

Aris, Azmi and Siang, H. P. and Tan, K. K. (2000) Treatment of food processing industrial effluent using coagulation and sequential batch reactor. Jurnal Kejuruteraan Awam, 12 (1). pp. 21-29. ISSN 0128-0147

Arsad, Agus (2013) Mechanical, thermal and morphological study of kenaf fibre reinforced RPET/ABS composites. Malaysian Polymer Journal, 8 (1). pp. 8-13. ISSN 1823-7789

Chin, Thoo Ai and Tat, Huam Hon and Md. Yusoff, Rosman and Rasli, Amran (2010) A proposed conceptual model of determinants of supply chain performance in the Malaysian electronic manufacturing services (EMS) industry. International Journal of Business and Social Science, 1 (1). pp. 137-144. ISSN 2219-1933 (Print); 2219-6021(Electronic)

Chuan Pei, Lim and Md. Tap, Masine (2002) Improving productivity through line balancing : a case study. Jurnal Mekanikal (14). pp. 48-62. ISSN 0127-3396

Harun, Muhammad Adli and Mohd. Rohani, Jafri and Wan Hamid, Wan Harun (2002) Ketepatan Kaedah Pengekosan Berasaskan Aktiviti (Abc) Berbanding Kaedah Pengekosan Tradisional Dalam Pengekosan Produk: Pemangkin Kepada Program 6-Sigma. Jurnal Teknologi A (37A). pp. 23-36. ISSN 0127-9696

Ishak, Idris and Abu Hassan, Shukur (1997) Pembuatan panel badan kereta lumba Formula-M daripada bahan polimer komposit (GFRP). Jurnal Mekanikal, 2 (4). pp. 52-63. ISSN 0127-3396

Ismail, Napsiah and Abu Bakar, Nooh and Juri, Abdul Hakim (2004) Recognition of cylindrical-based features using edge boundary technique for integrated manufacturing. Robotics and Computer-Integrated Manufacturing, 20 (5). pp. 417-422. ISSN 07365845

Jamaludin, Khairur Rijal (2009) Development of 5S practice checklist for manufacturing industry. World Congress On Engineering 2009, Vols I and II Book Series . pp. 545-549. ISSN 978-988-17012-5-1

Jamaludin, Khairur Rijal (2009) Performance of solvent debinding using design of experiment method. Sains Malaysiana, 38 (6). pp. 883-888. ISSN 0126-6039

Jamaludin, Khairur Rijal (2008) Rheological behavior of SS316l gas atomized powder in bimodal particle size distribution in a composite binder system. International Journal of Mechanical and Materials Engineering, 3 (2). pp. 108-114. ISSN 1823-0334

Jamaludin, Khairur Rijal and Abdul Talib, Hayati @ Habibah and Tan, Chiaw Hooi (2007) An improvement to the performance measurement system of the logistics operation. The Journal of The Institution of Engineers Malaysia, 68 (2). pp. 41-46. ISSN 0126-513X

Jamaludin, Khairur Rijal and Muhamad, Norhamidi (2010) Rheological investigation of water atomized metal injection molding (MIM) feedstock for processibility prediction. Advanced Materials Research, 83-86 . pp. 945-952. ISSN 1022-6680

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ismail, Muhammad Hussain and Ibrahim, Murtadhahadi (2008) Particle size and injection temperature effect on the injection molding of SS316l powder. Journal of Mechanical Engineering , 5 (1). pp. 59-71. ISSN 1823-5514

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and M. Amin, Sri Yulis and Ab. Rahman, Mohd Nizam and Ibrahim, Murtadhahadi (2008) Pengoptimuman parameter pengacuan bagi mengurangkan kecacatan jasad anum proses pengacuan suntikan logam (MIM). The Journal of The Institution of Engineers, Malaysia, 69 (2). pp. 40-46. ISSN 0126-513X

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and M. Amin, Sri Yulis and Ab. Rahman, Mohd Nizam and Ibrahim, Murtadhahadi (2006) Rheological Investigation Of Stainless Steel Powder In Bimodal Particle Size Distribution. Journal of Applied Technology, 4 (1). pp. 51-59. ISSN 1693-2536

Jamaludin, Khairur Rijal (2009) Moulding parameter optimisation for the best sintered density. World Congress On Engineering 2009, Vols I and II Book Series : Lecture Notes in Engineering and Computer Science . pp. 590-594. ISSN 978-988-17012-5-1

Jamaludin, Khairur Rijal (2009) Optimizing the injection parameter of water atomised SS316L powder with design of experiment method for best sintered density. Chiang Mai Journal of Science, 36 (3). pp. 349-358. ISSN 0125-2526

M. Amin, Sri Yulis and Jamaludin, Khairur Rijal (2009) Rheological properties of SS316l MIM feedstock prepared with different particle sizes and powder loadings. The Journal of the Institution of Engineers, Malaysia, 7 (2). pp. 59-63. ISSN 0126-513X

Mailah, Musa (1999) Design and development of a multi-gripper for use in an automated robotic assembly system. Jurnal Mekanikal (7). ISSN 0127-3396

Manan, Zainuddin A. and Siang, Lim C. and Mustapa, Ana N. (2009) Development of a new process for palm oil refining based on supercritical fluid extraction technology. Industrial & Engineering Chemistry Research, 48 (11). pp. 5420-5426. ISSN 0888-5885

Mat Saman, Muhamad Zameri and Law, Cheak Ying (2002) Work Improvement At A Car Manufacturing Company. Jurnal Teknologi A (37A). pp. 73-87. ISSN 0127-9696

Md. Sirat, Rozlina and Md.Tap, Masine and Mohd. Shaharoun, Awaluddin (2000) A survey report on implementation of design for assembly (DFA) in Malaysian manufacturing industries. Jurnal Mekanikal, 1 . pp. 60-75. ISSN 0127-3396

Mohamad Nor, Nor Hafiez and Jamaludin, Khairur Rijal (2009) Flow behaviour to determine the defects of green part in metal injection molding. International Journal of Mechanical and Materials Engineering, 4 (1). pp. 70-75. ISSN 1823-0334

Muhamad , Norhamidi and Jamaludin, Khairur Rijal and M. Amin, Sri Yulis and Ab. Rahman, Mohd. Nizam (2008) Pemilihan bahan suapan bagi proses pengacuan suntikan logam berdasarkan kepada kajian sifat reologi. Jurnal Teknologi A (48A). pp. 19-34. ISSN 0127-9696

Musa, Hamidon and Thean, Chan Tan (1998) Proses performance monitoring in pewter manufacturing. Jurnal Mekanikal (11). pp. 12-19. ISSN 0127-3396

Olugu, Ezutah Udoncy and Wong, Kuan Yew (2008) Simulation study on lens manufacturing process flow. Second Asia International Conference on Modelling & Simulation . pp. 806-811. ISSN 978-0-7695-3136-6/08

Wong, Kuan Yew and Tham, Chien Yeh (2007) A simulation study on the manufacturing of electronic chassis. Rio's International Journal on Sciences of Industrial and Systems Engineering and Management, 1 (1). pp. 29-54. ISSN 1982-6443

Zakuan, N. M. and Saman, M. Z. M. (2009) Lean manufacturing concept: The main factor in improving manufacturing performance - a case study. International Journal of Manufacturing Technology and Management, 17 (4). 353 -363. ISSN 1368-2148

Book Section

Abdul Majid, Zulkifli and Yaacob, Zulkefli and Mohsin, Rahmat (2006) Emission and performance evaluation of motorcycle. In: Advanced Gas Technology 1. Penerbit UTM, Johor , 77 - 94. ISBN 978-983-52-05989-9

Ismael, Kamarulafizam and Salleh, Shaharuddin and Najeb, J. M. and Jahangir Bakhteri, R. B. (2008) Efficient parameter selection of support vector machines. In: IFMBE Proceedings. Institute of Electrical and Electronics Engineers, New York, pp. 183-186. ISBN 978-354069138-9

Jamaluddin, Khairur Rijal (2008) Powder injection moulding, its outstanding features an development. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 62-75. ISBN 978-983-52-0563-7

Jamaluddin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd. Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd. Halim Irwan and Murtadhahadi, Murtadhahadi and Mohamad Nor, Nor Hafiez (2008) An influence of the SS316L powder particle shape to the densification of metal injection moulding (MIM) compact. In: Advances In Materials, Manufacturing and Materials Engineering. Penerbit UTM , Johor, pp. 94-104. ISBN 978-983-52-0563-7

Muhamad, Ida Idayu and Md. Jusoh, Yanti Maslina and Chew, Tin Lee (2006) Challenges in relating machine vision/image analysis to process changes in biological materials. In: Special Topics In Bioprocess Engineering Volume I. Penerbit, Johor , pp. 191-218. ISBN 978-983-52-0600-9

Mustapha, Muhamad Firdaus and Deris, Safaai and Zakaria, Zalmiyah (2008) Manufacturing rescheduling using knowledge-based approach. In: Advances in Planning, Scheduling and Timetabling. Penerbit UTM , Johor, p. 86. ISBN 978-983-52-0634-4

Radwan, Ashraf Hafiz (2008) Computer integrated manufacturing systems. In: Advances in Manufacturing and Industrial Engineering. Penerbit UTM , Johor, p. 241. ISBN 978-983-52-0557-4

See, Phen Chiak and Wong, Kuan Yew and Komarudin, Komarudin (2008) A technique for improving the max-min ant system algorithm. In: Proceedings of the International Conference on Computer and Communication Engineering 2008, ICCCE08: Global Links for Human Development. Institute of Electrical and Electronics Engineers, New York, 863-866 . ISBN 978-142441692-9

Yusof, Umi Kalsom and Deris, Safaai (2008) Optimizing capacity planning resources in the presence of demand uncertainty : a survey. In: Advances in Planning, Scheduling and Timetabling. Penerbit UTM , Johor, pp. 1-20. ISBN 978-983-52-0634-4

Monograph

Abdul Aziz, Azhar (2004) Cadangan Bagi Membangunkan Sistem Pengangkutan Ringan Halaju Rendah Jenis "ARTICULATING" Bagi Kegunaan Membawa Pelawat di UTM. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Abdul Hamid, Abu Bakar and Krishnapillai, Gangeswari A Study on the Impact of Purchasing and Early Supplier Involvement (ESI) Program in Manufacturing Firm. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Rahim, Ruzairi and Chan, Kok Seong (2008) MMS : mobile monitoring system using electrical capacitance tomography (ECT). Project Report. Faculty of Electrical Engineering , Skudai, Johor. (Unpublished)

Awang , Siti Rahmah and Mohd Nain, Ahmad Shukri and Md Shah, Ishak Kajian Ke Atas Permintaan Pasaran Terhadap Keperluan Kursus Psikologi Industri di Malaysia. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Harun, Sobri and Shamsudin, Supiah and Hanapi, Muhammad Nassir and Mohd. Amin, Mohd. Zaki and Ismail, Nurul Adzura (2009) Regional climate scenarios using a statistical downscalling approach. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Hassan, Adnan and Mohd. Shaharoun, Awaluddin and Oktaviandri, Muchamad (2005) Dynamic scheduling in a multi-product manufacturing system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Idris, Ani and Mohd. Yusof, Noordin and Rashid, Roslina and Ahmed, Iqbal (2008) High Performance Blended Membranes Using A Novel Preparation Technique. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Jamil, Rossilah and Md. Som, Hishamuddin Training needs analysis practices : a survey on large scale companies in manufacturing industry in west Malaysia. Project Report. Faculty of Management and Human Resource Development, Skudai, Johor. (Unpublished)

Kamsah, Nazri and Idris, Mohd. Hasbullah and Phuan, Yoong Jiann (2004) Fe evaluation of thermal property of mould wall material for investment casting and the effect of layers on the hardness of the casting product. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Kassim, Fauziah and Khatib, Anwar and Yusof, Mohd Zain and Marto, Aminaton (2004) The Grid Mat Method to Increase Bearing Capacity of Subgrade Soil. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Khalid, Esa and Othman, Muhammed Fauzi and Abdul Hamid, Mohd Azhar and Mohd Balwi, Mohd. Koharuddin and A Kassim, Othman (2005) Analisis Tekstual Kreativiti Menurut Pandangan Islam. Project Report. Faculty of Management and Human Resource Development, Skudai, Johor. (Unpublished)

Mailah, Musa and Md. Zain, Mohd. Zarhamdy and Jahanabadi, Hossein and Abdul Rahim, Mohammad Akmal Baharain (2009) Mathematical modelling and simulatrion of the human arm for control purpose. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mailah, Musa and Jamaluddin, Hishamuddin and Pitowarno, Endra and Purnomo, Didik Setyo (2005) Intelligent Material Handling Mobile Robot for Industrial Purpose with Active Force Control Capability. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Md. Tap, Masine and Mohamed Shaharoun, Awaluddin and Wan Hussin, Wan Nazdah (2003) Determination of felxible measures in advanced manufacturing system and their effect in productivity and responsiveness. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Amin, Shamsudin (2005) Design of an intelligent vision inspection system for quality control in semiconductor industry. Project Report. Faculty of Electrical Engineering, Skudai, Johor. (Unpublished)

Mohd. Ariff, Lily Suriani and Ungku Ahmad, Ungku Norulkamar and Abdul Rahman, Siti Aisyah (2004) Hubungan kepuasan komunikasi dengan komitmen terhadap organisasi di kalangan pekerja teknikal: kajian kes di Flextronics International, Senai, Johor. Project Report. Faculty of Management and Human Resource Development, Skudai, Johor. (Unpublished)

Othman, Mohd. Yusuf and Mohd. Saiyudi, Noor Khaida Wati (2007) Photocatalytic oxidation of gas phase volatile organic compounds (VOCS) using nanostructure titanium dioxide based materials. Project Report. Faculty of Science, Skudai, Johor. (Unpublished)

Radin Sumadi, Salihuddin and Chan, Poh Chin and Jasmin, Lenny Sheryme (2006) Blended cement for waterproofing applications. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Sudirman, Rubita and Yunus, Jasmy (2002) Development of a PC-based electropalatograph system for speech therapy. Project Report. Faculty of Electrical Engineering, Skudai, Johor. (Unpublished)

Wan Abdul Rahman, Wan Aizan and Rasit Ali, Roshafima and Jamaluddin, Jamarosliza and Mohamad, Ida Idayu (2009) Development Of Low Density Polyethylene/Sago Based Biofilm Via Blow Film Molding Technique. Project Report. Faculty of Chemical and Natural Resource Engineering, Skudai, Johor. (Unpublished)

Wan Hamid, Wan Harun and Mohd. Rohani, Jafri (2005) The study on the integration of Activity Based Costing (ABC) system and six-sigma principle. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Yaakob, Omar and Ibrahim, Zaharah and Priyanto, Agoes and Omar, Mohd Shahir Shamir and Adnan, Faizul Amri and Hamdan, Salehuddin and Md Salleh, Madihah and Abdul Wahap, Mohd Arizam (2008) Biomechanics and Hydrodynamics Study od Aquatic Locomotion. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Conference or Workshop Item

Ahmad, S. and Muhamad, N. and Muchtar, A. and Sahari, J. and Jamaludin, Khairur Rijal and Ibrahim, M. H. I. and Mohamad Nor, N. H. and Murtadhahadi, I. (2008) Producing of titanium foam using titanium alloy (Al3Ti) by slurry method. In: Brunei International Conference of Engineering and Technology (BICET) 2008, 3 and 4th November 2008, Brunei Darulssalam.

Muhamad, Norhamidi and Murtadhahadi, I. and Sulong, Abu Bakar and Che Harun, Che Hassan and Jamaludin, Khairur Rijal and Ibrahim, Mohd Halim Irwan (2008) Kesan Parameter Percampuran Dan Pembutiran Ke Atas Penyediaan Bahan Suapan Yang Optimum Bagi Proses Pengacuan Suntikan Logam. In: Malaysian Metalurgical Conference 2008, 3 & 4 December 2008, Bangi, Selangor.

Abdul Majid, Fadzilah Adibah (2007) Biotechnology and Beauty. In: Woksyop Pembangunan Herba dan Bioteknologi, 24th March 2007, CEPP Enstek. (Unpublished)

Abdul Majid, Fadzilah Adibah (2007) ISU KUALITI DAN PENDAFTARAN PRODUK BERASASKAN BIOTEKNOLOGI. In: Woksyop Pemakanan dan Bioteknologi, February 2007, UTM KL. (Unpublished)

Abdul Majid, Fadzilah Adibah (2007) Peranan Herba dalam Kosmetik. In: Woksyop Pembangunan Herba dan Bioteknologi. (Unpublished)

Abdul Raman, Norazmein and Jamaludin, Khairur Rijal (2008) Implementation of Toyota Production System (TPS) in the production line of a local automotive parts manufacturer. In: International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru.

Abdul Talib, Hayati @ Habibah and Mohd Ali, Khairul Anuar and Jamaludin, Khairur Rijal (2008) Quality assurance in halal food manufacturing in Malaysia: a preliminary study. In: International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru.

Ahmad, S. and Muchtar, A. and Muhamad, N. and Sahari, J. and Jamaludin, K. R. and Ibrahim, M. H. I. (2009) Optimising of processing parameters of Titanium alloy foams using Taguchi method for improved electrical conductivity. In: Proceedings of the Graduate Publication Workshop 2009, 30-31 Mac 2009, The Residence Hotel, UNITEN.

Ahmad, Sufizar and Muhamad, Norhamidi and Muchtar, Andanastuti and Sahari, Jaafar and Jamaludin, Khairur Rijal and Ibrahim, Mohd Halim Irwan (2008) Sintering effect for titanium foam prepared by slurry method. In: Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing , June 30th – July 2nd, 2008, University of Skövde, Sweden.

Ahmad, Sufizar and Muhamad, Norhamidi and Muchtar, Andanastuti and Sahari, Jaafar and Jamaludin, Khairur Rijal and Ibrahim, Mohd Halim Irwan and Mohamad Nor, Nor Hafiez and Ibrahim, Murtadhahadi (2008) Pembangunan dan penghasilan titanium berbusa. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

Awang, Dzulkifli (2004) Rekabentuk Industri Dalam Kejuruteraan Mekanikal. In: Conference On Engineering Education (CEE 2004), 14-15 December 2004, Kuala Lumpur.

Bakri, Ahmadon and Misnan, Mohd. Saidin and Kuang, Lee Chia and Ismail, Syuhaida and Md. Yusof, Zakaria (2009) SHASSIC: assessement tools for safety. In: International Conference On Construction Inustry ii 2009, 2009, Padang Indonesia.

E., Amrina and S.M., Yusof (2009) A manufacturing performance evaluation tool for Malaysian automative SMEs. In: 3rd International Conference on Operations and Supply Chain Management, 2009, AIMST Campus, Bujang Valley, Malaysia.

Harun, Mohd Ruzi and Muhamad, Norhamidi and Jamaludin, Khairur Rijal (2009) A review of workability of wrought magnesium alloys. In: Advanced Manufacturing Research Group Seminar, July 2009, Kajang, Selangor.

Ibrahim, Mohd Halim Irwan and Jamaludin, Khairur Rijal (2009) Metal Injection Moulding, orthogonal array, analysis of variance, flexure strength, sintering. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 Oct. 2009, Kuala Lumpur.

Ibrahim, Mohd Halim Irwan and Muhamad, N. and Jamaludin, Khairur Rijal (2009) Rheological characterization of water atomised stainless steel powder for micro metal injection molding. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Ibrahim, Mohd Halim Irwan and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar and Mohamed Nor, Norhafiez and Ibrahim, Murtadhahadi (2008) Pengoptimuman parameter dalam pengacuan suntikan logam mikro (µMIM). In: Seminar AMREG 08, 12 Jun 2008, Seremban, Malaysia.

Ibrahim , M.H.I and Muhamad, N. and Sulong, A.B. and Murtadhahadi, I and Jamaludin, K.R. and Ahmad, S. and Nor, N.H.M (2008) Water Atomised Stainless Steel Powder for Micro Metal Injection Molding: Optimization of Rheological Properties. In: Malaysian Mettallurgical Conference 2008, 3-4 December 2008, Bangi, Selangor.

Ibrahim , M.H.I and Muhamad, N. and Sulong, A.B. and Murtadhahadi, I and Jamaludin, K.R. and Ahmad, S. and Nor, N.H.M (2008) Rheological Characteristic of Water Atomised Stainless Steel Powder for Micro Metal Injection Molding. In: Second Advanced Manufacturing Researach Group Seminar , 17 & 18 December 2008, Port Dickson, Negeri Sembilan.

Ismail, Al Emran and Othman, Akbar (2006) Energy absorption performance of conical natural fiber reinforced composites Abstract. In: 1st Regional Conference on Vehicle Engineering & Technology, 3-5 July 2006, Kuala Lumpur, Malaysia.

Jamaludin, K. R. and Muhamad, N. and Ab. Rahman, M. and Amin, S. Y. M. and Murtadhahadi, - and Ismail, M. H. (2008) Injection molding parameter optimization using the taguchi method for highest green strength for bimodal powder mixture with SS316L in PEG and PMMA. In: World Congress on Powder Metallurgy & Particulate Materials, 8-12 June 2008, Washington D. C..

Jamaludin, K. R. and Muhamad, Norhamidi and Ab. Rahman, M. N. and Amin, S. Y. M. and Ahmad, S. and Ibrahim, M. H. I. (2009) Sintering parameter optimisation of the SS316L metal injection molding (MIM) compacts for final density using Taguchi method. In: The 3rd South East Asian Technical University Consortium (SEATUC) Symposium, 25 - 26 Feb 2009 , Johor Bahru, Johor, Malaysia.

Jamaludin, K. R. and Muhamad, N. and Ab. Rahman, M. N. and Amin, S. Y. M. and Ahmad, S. and Ibrahim, M. H. I. and Murtadhahadi, I. and Nor, N. H. M. (2008) An Influence of SS316L’s Particle Shape to the Injection Molding of Composite Binder Feedstock. In: Confederation of ASEAN Engineers Organization Conference 2008 , 26-29 November 2008, Bangkok, Thailand.

Jamaludin, Khairur Rijal (2009) Sintering parameter optimization with quality engineering technique : best flexure strength. In: 3rd Powder Metallurgy Symposium & Exhibition 2009, 12-13 August 2009, Kuala Lumpur, Malaysia. (Unpublished)

Jamaludin, Khairur Rijal and Ahmad, Sufizar (2009) Taguchi method for the determination of optimised sintering parameters of titanium alloy foams. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Jamaludin, Khairur Rijal and Mohamad Nor, Nor Hafiez (2009) Feedstock characterisation of titanium alloy mix with palm stearin binder system for metal injection moulding. In: Advanced Manufacturing Research Group Seminar, 2009, Kajang, Selangor.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi (2009) An influence of a binder system to the rheological behavior of the SS16l metal injection molding (MIM) feedstock. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Hadi, Murtadhahadi (2008) Analysis of variance on the metal injection molding parameters using a bimodal particle size distribution feedstock. In: International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru.

Jamaludin, Khairur Rijal and N., Muhamad (2009) Taguchi method for optimising the sintering parameter of the Metal Injection Moulding (MIM) compacts. In: International Conference on Flexible Automation and Intelligent Manufacturing, 6-8 July 2009, University of Teeside, Middlesbrough, United Kingdom.

Jamaludin, Khairur Rijal and Norhamidi, Norhamidi and Ab. Rahman, Mohd Nizam (2009) Orthogonal array technique for optimizing the sintering parameter of the metal injection molding (MIM) compact: best flexure strength. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 Oktober 2009, Kuala Lumpur, Malaysia.

Jamaludin, Khairur Rijal and Muhamad, N. and Ab. Rahman, M. N. and Murtadhahadi, I and Amin, S. Y. M. and Ahmad, S. and Ibrahim, M. H. I. and Nor, N. H. M. (2008) Rheological investigation of water atomised Metal Injection Molding (MIM) feedstock for processbility prediction. In: Advances in Materials and Processing Technologies (AMPT) conference 2008, 2-5 November 2008, Manama, Kingdom of Bahrain.

Jamaludin, Khairur Rijal and Muhamad, Norhamidi and Ab. Rahman, Mohd Nizam and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd Halim Irwan and Murtadhahadi, I and Mohamad Nor, Nor Hafiez (2008) Densification of SS316L Gas-Atomized and Water-Atomized Powder Compact. In: of Seminar 2ndAMREG 08, 17 Nov 2008, Port Dickson, Malaysia, 17 & 18 December 2008, Port Dickson, Negeri Sembilan, Malaysia.

Jamaludin, K. R. and Muhamad, N. and Ab. Rahman, M. N. and M. Amin, S. Y. and Ahmad, S. and Ibrahim, M. H. I. (2009) Sintering parameter optimisation of the SS316L Metal Injection Molding (MIM) compacts for final density using taguchi method. In: South East Asian Technical Universities Consortium(SEATUC) - 3rd SEATUC Symposium Proceeding, 25th - 26th February 2009, Johor Bahru, Malaysia.

M. Amin, Sri Yulis and Muhamad, Norhamidi and Abdullah, Shahrir and Jamaludin, Khairur Rijal (2008) Kajian pengoptimuman penyahikatan larutan menggunakan kaedah permukaan sambutan. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

M. Amin, Sri Yulis and Muhamad, Norhamidi and Abdullah, Shahrir and Jamaludin, Khairur Rijal (2008) Application of RSM Technique to Optimize the Solvent Debinding Process for MIM Compacts. In: Brunei International Conference of Engineering & Technology (BICET) 2008, 3 and 4th November 2008, Brunei Darulsallam.

Md. Daud, Mohd. Yusof (2012) Effectiveness of enterprise resource planning system in supporting the lean manufacturing. In: 3rd International Conference on Mechanical & Manufacturing Engineering, 20-21 November 2012, Batu Pahat, Johor, Malaysia.

Mohamad Nor, N. H. and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Ahmad, Sufizar (2009) Characterisation of titanium alloy feedstock for metal injection moulding using palm stearin binder system. In: The International Conference on Advances in Materials and Processing Technologies, 26-28 October 2009, Kuala Lumpur, Malaysia.

Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and Jamaludin, Khairur Rijal (2009) Injection molding parameter optimization of titanium alloy powder mix with palm stearin and polyethylene for green defects using taguchi method. In: 3rd Powder Metallurgy Symposium & Exhibition 2009, 12- 13 August 2009, Kuala Lumpur, Malaysia.

Mohamad Nor, Nor Hafiez and Muhamad, Norhamidi and M. Amin, Sri Yulis and Ahmad, Sufizar and Ibrahim, Mohd Halim Irwan and Ibrahim, Murtadhahadi and Jamaludin, Khairur Rijal (2008) Pengacuan suntikan logam (MIM) bagi serbuk titanium dengan sistem bahan pengikat stearin sawit. In: Seminar I - AMReG 08, 12 Jun 2008, Seremban, Malaysia.

Thesis

A. Aregia, Tarek Abdelhadi (2010) Computerized welding process selection and parameter determination. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

A. Rahman, Mohd. Darnalis (2013) Cellular manufacturing system development for machine-part cell formation and operation sequencing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahim, Norazura (2008) Visualization of automated plate cutting operation using DXF file. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Abdi, Ahmed Ali (2014) Application of lean and six sigma with simulation in health care centre. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdolahi, Ahmad (2010) High speed electroplating of nickel over stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Waduth, Mohamed Faisal (2013) Controller area network (CAN) based geometric tracking of scara robot. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Abdullah, Hanisom (2000) A study on the recovery of gold from mining effluents by an immobilised bacterial system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Abdullah, Nazri (2001) Integrated manufacturing execution and control system (FacStream). Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Abdullah, Zulkeflee (2003) Analysis and improvement of the product and process design using DFA house methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abrishamkar, Mehran (2013) TCP/IP-based control and monitoring of manufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu, Risal (2004) Recognition of single machining features using rule-based technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Hassan, Mohd. Akmal (2013) Life cycle cost analysis of a floating production storage offloading vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahamed, Ahmad Fauzi (2010) Effect of cutting parameters on the hole diameter and surface roughness for dry drilling of aluminum alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Mohd. Azizi Aqmar (2013) Performance evaluation of tungsten inert gas (TIS) welding on aluminium alloy 6061. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Bakir, Azman (2010) Characteristics of motion errors of 3–Axis CNC vertical milling machines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Khalid, Mariatul Qibtiyah (2013) Quality function deployment to achieve optimum design solution for transmission line projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Alashwal, Hany Taher (2003) The development of reactive constraint agent for the dynamic timetabling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ahrari, Ayoob (2010) Application of design of experiment technique in the nickel-chromium electroplating process on WC-Co substrate prior HFCVD diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alhassan, Muhammad Abubakar (2014) Sequential strategy for software process measurement using statistical process control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ali, Mohd. Nizam (2010) Performance evaluation of wire electrode discharge machining (WEDM) On Inconel 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Ainni (2013) Product design improvement through integration of Design for Assembly (DFA) and Theory of Inventive Problem Solving (TRIZ) methodologies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amalanathan, Asuntha (2001) Kajian perbandingan keberkesanan pengurusan penyenggaraan terancang kaedah konvensional dengan kaedah berkonsepkan pengurusan fasiliti : kes kajian : kompleks membeli-belah di Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Ang, Hooi Pheng (2001) An evaluation on local industries towards achieving ISO 14001 certification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anuar, Azman (2010) Investigation of laser cutting parameters on surface quality of stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arezoudar, Ehsan Fallahi (2013) Performance evaluation of electrospinning process to fabricate core/shell structure of magnetic nanofibers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Awang Yunus, Awang Ihsan (2013) Customer satisfaction towards the facilities management services at the Plaza Merdeka shopping mall, Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azman, Azri (2010) Performance evaluation of different process conditions when hard turning ASSAB 760. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Azwan Iskandar (2002) Study on implementation of step AP224 in process planning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baba, Ishak (2002) Kajian sifat mekanikal habuk kayu gergaji dan polietilena dalam pembuatan papan serpai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharum, Zirawani (2004) Penggunaan kaedah pensaizan-lot, forward wagner whitin dalam persekitaran rolling horizon : kajian kes : Syarikat Tokin (M) Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Bajuri, Muzairiah (2003) Pengurusan fasiliti bagi pelajar kurang upaya di institusi pengajian tinggi awam : kajian kes : Universiti Teknologi Malaysia, Skudai, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Baniani, Ali Mohammad (2013) Development of extended mathematical models for inventory control of perishable items in uncertainty environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Behrouzi, Farzad (2013) An integrated stochastic-fuzzy method for supply chain leanness evaluation in Iranian automotive small and medium enteprises. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Boroujeni, Sahar (2013) Mechanics of L-bending process for dual phase steel sheets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chia, Chon Yue (2010) Performance evaluation of diamond cutting tools when ultra precision grinding spherical part. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Choo, Hing Kok (2003) Aplication of a six sigma methodology in an automotive manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ch’Ng Emily, Huey Ling (2010) Musculoskeletal disorders among offshore-structure fabrication yard workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Derahman, Zamra (2001) Penyediaan jadual waktu menggunakan algoritma hibrid taakulan-berasaskan kekangan dan algoritma genetik : kajian kes Politeknik Sultan Haji Ahmad Shah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Elias, Mohd. Syafiq (2012) Synthesis of zeolite templated graphene (ZTG) from methanol via chemical vapor deposition (CVD) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Elita Amrina, Elita Amrina (2009) Manufacturing performance measurement tool for small and medium-sized enterprises. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Elshwain, Amad Alddein (2007) A study of lapping parameters to reduce polishing time of optical glass. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Er, Chin Hai (2001) Quality function deployment (QFD) and design for assembly (DFA) using teamset. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farid, Ali Akhavan (2008) Surface integrity of Inconel 718 during drilling operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghanbari, Taravat (2012) Effect of coupling agent and binder in kenaf paper on the mechanical and morphological properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ghashami, Seyed Sajad (2013) Development of an optimization model for scheduling, assignment and sequencing of hollow fiber membrane production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Harun, Mohd. Ruzi (2005) Part combination of design for assembly using Effort Flow Analysis (EFA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Adnan (2002) On-line recognition of developing control chart patterns. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseiniezhad, Navid (2013) Worker greenness index. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Imran (2010) Design of a curry puff making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Norfaizem (2010) Effect of tool length on plain turning performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Siti Rabiatull Aisha (2008) Interfacial reactions during soldering of Sn-Ag-Cu lead free solders on immersion silver and electroless nickel/ immersion gold surface finishes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Mohd. Rozaimi (2010) Effect of cutting parameters on the surface integrity of ground AISI 1148 steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jaaffar, Md. Razin (2002) Penilaian reka bentuk untuk pemasangan (DFA) Lucas-Hull untuk peralatan elektrik : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jafartayari, Saman (2010) Awareness of sustainable manufacturing practices in Malaysian manufacturers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamal, Siti Noorashikin (2013) Skin extracted pineapple juice as pulping and bleaching agent in papermaking process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamaludin, Khairur Rijal (2009) Kesan saiz dan bentuk partikel serbuk SS316l terhadap parameter pengacuanan suntikan logam menggunakan rekabentuk eksperimen. PhD thesis, Universiti Kebangsaan Malaysia, Fakulti Kejuruteraan dan Alam Bina.

Jamil, Norhazrina (2013) Methodology of sustainability assessment for membrane manufacturing processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamrani, Mohsen (2014) An inventory model for deteriorating items with nonlinear holding cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khodaei, Seyed Hossein (2013) Solving rehability redundancy allocation problem using simulated annealing algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khoshbakht, Pezhman Ahmadi (2013) Modeling of warranty cost for a lifetime warranty policy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kianpour, Kamyar (2012) Environment friendly as a new dimension of product quality from consumers perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Kumaresan, Kartik Sreedharaan (2011) Integration of smed and triz in improving productivity at semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Laffir, Mohamed Rizni (2000) Inventory management system for managers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Lani, Norziana (2010) High speed nickel plating on difficult to plate metal(Aluminium). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Lasimon, Norlia Mazlin (2009) Penggunaan konsep margin keuntungan secara ruang dalam menentukan kelebihan lokasi bagi kilang perusahaan roti. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation Science and Engineering.

Lazim, Azrina (2008) An optimization of tin plating process using design of experiment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Chao Yang (2000) Quality assurance-route to improve the reproducibility of colour in textile industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Khok Kheng (2001) Perekayasaan proses bisnes (business process reengineering) pengurusan fasiliti : kes kajian : perkhidmatan penghawa dingin UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Lee, Kian Hong (2002) The disassembly sequences generation using the graph of connection precedence relationship (CPR-GRAPH). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lian , Kit Yee (2004) Development of a neural network module for a coupled-tank liquid level control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Electrical Engineering.

Lim, Fei Min (2013) Guided wave propagation in assymetrical corrugated plates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lotfabadi, Amir Fereidouni (2008) Investigation on quality of hydroxyapatite adhesion on investment casting mould. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Low, Kam Hing (2003) Best management practice of silt traps using the environmental management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ma'aram, Azanizawati (2003) Quality assessment of hollow rapid prototyping model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Majlan, Kamyar Ahmadi (2011) Synthesis and characterization of ni-cnt composite coating produced by direct electro plating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Hairul Nizam (2003) Kajian kepentingan komunikasi dalam pengurusan fasiliti di kondominium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Marjudi, Suziyanti (2004) Sistem jaminan kualiti Kilang Top Empire Sdn. Bhd. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Masood, Ibrahim (2004) SPC charting procedure for monitoring of small and large shifts in process mean. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Ani, Sarizal (2006) Physical behaviour of powder ceramic part using cold isostatic pressing (CIP) processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Sirat, Rozlina (2002) Development of a framework for implementing design for assembly (DFA) in small and medium sized industries (SMIs). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Zain, Badrul Aisham (2002) Penilaian reka bentuk untuk pemasangan (DFA) Hitachi AEM untuk peralatan elektrik : satu kajian kes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mesuan, Mohd. Ariffin (2010) Simulation of metal stamping for panel front door inner part for new automotive model development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Miriha, Seyyed Masih (2013) Solving reliability redundancy allocation problem using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Yatim, Jamaludin (2003) Performance of pultruded GFRP composites under tropical climate. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed, Ahmad Dzia’Uddin (2010) Effect of process parameters on surface roughness produced by turning boring operation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Nazari, Munira (2010) Product design improvement through integration of theory of inventive problem solving (TRIZ) and design for manufacture and assembly (DFMA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad, Noor Nadhiya (2010) Product structure ontology to support semantic search in manufacturing requirements management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information Systems.

Mohd. Eadey, Eliyana (2013) Effectiveness of six sigma implementation in hard disc manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jais, Khairul Anuar (2013) Product design improvement through Design for Assembly (DFA) methodology and Theory of Inventive Problem Solving (TRIZ) approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Lair, Noor Ajian (2002) Effectiveness of JIT implementation across a supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Noor Azizaman, Nur Mazreen (2013) Kesan amalan prinsip pengurusan kualiti ISO 9001: 2008 dan kepuasan pelanggan keatas gelagat komunikasi dalam pendidikan tinggi. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Mohd. Yunus, Mohd. Yusri (2010) Software development of concurrent design for manufacturing process selection of plastic materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Poh Lay (2009) Model for throughput performance measures and monitoring system in semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noh, Shahril (2010) Quality characteristics of thin-walled plastic injection parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nya, Reza Manouchehry (2014) Stress intensity factor in c-ring shape. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ojaghi, Yosra (2013) Production layout optimization for small and medium scale food industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ong, Choon Hee (2000) Keberkesanan aktiviti penyelenggaraan produktif menyeluruh (total productive maintenance) dalam meningkatkan perolehan : satu kajian di kilang pengeluar color display tube. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Othman, Nurul Farhana (2013) Electrodeposition of carboxylated multiwall carbon nanotubes on graphite reinforcement carbon for voltammetry detection of cadmium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Science.

Othman, Siti Hajar (2002) Software development of ISO document tracking system (IDTS) for Consultancy Unit, Bureau of Innovation and Consultancy, UTM Skudai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Piroozfard, Hamed (2013) Solving a multi-objective job shop scheduling problem using a hybrid genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Poobalan, Prakash (2009) Equipment and process performance improvement using automated monitoring system. Masters thesis, Universiti Teknologi Malaysia.

Rabiee, Ali (2014) Integration of taguchi's loss function with quality control charts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahmat, Norashikin (2013) Customs, immigration and quarantine complex facilities for the disabled case study: Bangunan Sultan Iskandar, Johor Bahru, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Rakiman, Khairol Anuar (2003) The application of intelligent active force control of a robot manipulator in surface finishing processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramanathan, Geeva Raj (2009) Total Quality Management (TQM) at an original device manufacturer (ODM) a case study : failure analysis depertment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramli, Mohammad Fadzli (2004) Sistem keseimbangan barisan pemasangan berkomputer menggunakan kaedah heuristik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Ramli, Mohd. Ridhwan (2010) Design of new interlocking bricks making machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ranjbaran, Alireza (2013) Modeling lifetime warranty policy involving cost sharing between manufacturer and module supplier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rashiddy Wong, Freddawati (2008) Effect of drill geometry of uncoated tool when drilling titanium alloy, Ti-6Al-4V. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Renani, Nafiseh Chorbani (2013) AHP model for optimum distribution network selection in food industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Roudsari, Arousha Haghighian (2013) A bi-objective stochastic single facility location model for a supermarket. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rozali, Afzan (2010) Product design improvement through design for manufacture and assembly (DFMA) and theory of inventive problem solving (TRIZ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sa'ude, Nasuha (2004) Development of computer aided reprocessability index (CARPI) system for rotational parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadeghiamirshahidi, Narjes (2014) Development of a system dynamic model for aggregate planning in supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saeed Ahmed, Radwan Ahmed (2009) Performance and evaluation of graphite when machining hardened steel ASSAB 718. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safari, Habiballah (2010) Effect of two-step pretreatment on cobalt contents and surface roughness of tungsten carbide substrate prior to diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said Ali @ Syed Ali, Sharifah Aznee (2010) Analysis of slips and falls among workers at workplace. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samad, Zaiton (2005) Study on iron and manganese removal in river water for textiles industry usage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Abdul Rahim (2003) Product development using concurrent engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samsuri, Mohd. Shah (2004) Penggunaan perisian penjadualan pegawai penyelia projek JKR Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahri, Norsyarizan (2010) Development of a material handling system for catheter manufacturing process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaifuddin Zamrah, Zarak (2009) Cost analysis software development for injection moulding in the concurrent engineering environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsudin, Zuraidy (2007) Developement of ceramic cutting insert of alumina (Al2O3) and zirconia / zirconium oxide (ZrO2) for turning tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shayganpour, Amirreza (2010) Evaluation of significant factors in aluminum lost foam casting using doe approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Soh, Chee Hong (2013) Supply chain performance improvement of government clinics using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Soh, Wen Hann (2009) Effect of oil palm fibre addition on the mechanical properties of shell mould investment casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Noralfishah (2001) Kajian terhadap masalah kadar penggunaan rendah (low fleet utilisation) dalam perkhidmatan pengurusan kenderaan : kes kajian : Telekom Malaysia Berhad Zon Selatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Sulong@Zakaria, Zaeime (2010) Development of computer-aided materials and manufacturing process selection software using Boothroyd-Dewhurst methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Taghizadeh, Hamid (2014) A case study of improving the tile manufacturing procsses using Lean Six Sigma. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Chew Fen (2000) Satu kajian tentang keberkesanan sistem MRP II di Schick Malaysia, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Management.

Tang, Chern Fon (2013) Characterization of green corrosion inhibitor using Taguchi dynamic approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tuman, Rosaniza (2004) Pengurusan fasiliti di Taman Agro : kajian kes : Taman Warisan Pertanian, Putrajaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Wakhi Anuar, Nur Farah Bazilah (2012) The effect of forging temperature on the properties of biodegradable MG-0.7CA alloy for implant application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Abu Seman, Sharifah Zainaf (2010) Integration of design for manufacturing and assembly (DfMA) and theory of inventive problem solving (TRIZ) for design improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Ibrahim, Wan Abd. Rahman Assyahid (2006) Design and development of thermodynamics apparatus using design for manufacture and assembly (DFMA) methodology. Masters thesis, Universiti Teknologi Malaysia.

Wasoh @ Mohamad Isa, Halim (2008) Analisa punca masalah kecacatan produk menggunakan alat kawalan kualiti berstatistik. Masters thesis, Universiti Teknologi Malaysia, Faculty of Computer Science and Information System.

Wong, Yun Hong (2009) Metal filling characteristics of aluminium lost foam casting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yam, Lee Hong (2002) Building design factors its significance in affecting office building occupancy : case study : Menara Public Bank, Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Geoinformation and Real Estate.

Yusof, Umi Kalsom (2013) Bio-inspired and musical-harmony approaches for machine allocation optimization in flexible manufacturing system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Computing.

Yusoff, Salahuddin (2010) Performance evaluation of carbide tool in end milling of medium density fiberboard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

This list was generated on Wed Nov 26 04:17:55 2014 MYT.