Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Chemical Engineering" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items: 221.

A

A-Jalil, S. and Hashim, Haslenda and Hassim, Mimi Haryani and Johari, Anwar (2012) Fugitive emission reduction through optimization. Computer Aided Chemical Engineering, 31 . pp. 485-489. ISSN 1570-7946

A. Majid, Rohah (2012) Foam of polyurethane-palm oil based polyol/montmorillonite nanocomposite. In: National Symposium on Polymeric Materials 2012 (NSPM 2012), 2012.

A. Majid, Rohah (2012) Study on synthesis of polypyrrole via chemical polymerization method. In: International Conference on Advanced Material Engineering & Technology 2012 (ICAMET 2012), 28-30 November 2012, Penang, Malaysia.

Ab Muis, Zarina (2012) St-P19: a review on feed-in tariff in Malaysia and comparison with other countries. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 2012.

Ab Muis, Zarina (2012) Waste to energy-electricity generation for Iskandar Malaysia. In: 26th SYMPOSIUM OF MALAYSIAN CHEMICAL ENGINEERS (SOMChE-2012) in conjunction with 4th INTERNATIONAL CONFERENCE ON CHEMICAL AND BIOPROCESS ENGINEERING (ICCBPE-2012), 2012.

Abbaszadeh, Sahar and Hassim, Mimi Haryani and Hurme, Markku and Kasmania, Rafizana M. (2012) Computer aided assessment and design of occupationally healthier process during research and development stage. Chemical Engineering Transactions, 26 . pp. 249-254. ISSN 1974-9791

Abd Manan, Zainuddin (2012) Targeting the maximum carbon exchange for a total industrial site. In: Targeting the Maximum Carbon Exchange for a Total Industrial Site, 22nd European Symposium on Computer-Aided Process Engineering, 2012.

Abd. Hamid, Mohd. Kamaruddin (2012) Development of a sustainable integrated process design and control for chemical processes. In: 4th International Conference on Chemical and Bioprocess Engineering in Conjuction with the 26th Symposium of Malaysian Chemical Engineers, 21- 23 November 2012, Kota Kinabalu, Sabah, Malaysia.

Abd. Jalil, Aishah (2012) Electrosynthesis for grown Zn0 nanoparticles deposited onto hy zeolite with enhanced decolorization of organic dyes. In: Proceeding ICPE 2012 - Fatien, 2012.

Abd. Jalil, Aishah (2012) Iron dissolution and thermodynamic study Of 2-chlorophenol decomposition using a-feooh catalyst. In: Proceeding ICPE 2012 - Rohayu, 2012.

Abd. Jalil, Aishah (2012) New modified mesostructured silica nanoparticles catalyst for Co2 methanation. In: Proceeding ICPE 2012 - Herma Dina, 2012.

Abd. Jalil, Aishah (2012) Photodecolorization of methyl orange from aqueous solution via electrosynthesized flakes-like zinc oxide. In: Proceeding ICPE 2012 - Yuny, 2012.

Abd. Jalil, Aishah (2012) Recent development in mesoporous materials based anoparticles for modern medicine delivery. In: Proceeding ICPE 2012 - Arif, 2012.

Abd. Majid, Fadzilah @ Adibah and Mukrish, M. H. and Chua, L. S. and Ya'akob, Harisun and Sarmidi, Mohamad Roji (2012) The effects of water and methanolic extracts of labisia pumila on collagen synthesis in human skin fibroblast (Hsf1184) Cells. Regenerative Research, 1 (1). pp. 33-37. ISSN 2232-0822

Abd. Rahman, Mohd. Redza (2012) Bacterial cellulose-chitosan membrane grafted with theophylline-imprinted copolymer by free radical copolymerization. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Nur Syuhada (2012) Solubility model of palm oil extraction from palm fruit using sub-critical R134a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Aziz, Azila and Sarmidi, Mohamad Roji and Aziz, Ramlan and Mohamed Noor, Norhayati (2012) Influence of amount of virgin cocunut oil in VCO loaded solid lipid particles sizes. In: 4th International Conference on Biotechnology for the Wellness Industry, 22 - 24 June 2012.

Abdul Malek, Roslinda and Othman, Nor Zalina and Sarmidi, Mohamad Roji and Aziz, Ramlan and El Enshasy, Hesham Ali (2012) Optimization of bioreactor cultivation process for mass production of hendersonia SP: a novel strain applied for biological control of oil palm disease. In: 4th International Conference on Biotechnology for the Wellness Industry : Wellness for Health and Productivity : New Trends, Challenges and Opportunity, 20-21June, 2012, Kuala Lumpur, Malaysia.

Abu Bakar, Aznizam (2012) Tensile properties and morphology of ethylene vinyl acetate/ epoxidized natural rubber/ halloysite nanotube (EVA/ENR-50/HNTs) nanocomposites. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Abu Bakar, Aznizam (2012) Tensile properties and morphology of Ethylene Vinyl Acetate/Epoxidized Natural Rubber/Halloysite Nanotube (EVA/ENR-50/HNTs) Nanocomposites. In: Asean International Conference on Materials, Minerals and Polymer, 23-24 March 2012, 2012.

Abu Bakar, Aznizam and Hassan, Azman (2012) Tensile and impact properties in hybrid surface treated-oil palm empty fruit bunch (OPEFB)/ talc-filled poly(vinyl chloride) (PVC) composites. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Abu Bakar, Suraya Hanim and Abd. Hamid, Mohd. Kamaruddin and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) Development of a new model-based intergrated process design and control for heat exchanger networks. In: 4th International Conference on Chemical and Bioprocess Engineering in Conjuction with the 26th Symposium of Malaysian Chemical Engineers, 21 - 23 November 2012, Kota Kinabalu, Sabah, Malaysia.

Adrus, Nadia and Ulbricht, Mathias (2012) Molecularly imprinted stimuli-responsive hydrogels for protein recognition. Polymer (United Kingdom), 53 (20). pp. 4359-4366. ISSN 0032-3861

Ahmad, Arshad (2012) Effect of process conditions on separation of azeotropic mixtures. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Ahmad, Arshad (2012) Spray drying of fruit juices. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Ahmad Mutamim, Noor Sabrina and Zainon Noor, Zainura and Abu Hassan, Mohd. Ariffin and Olsson, Gustaf (2012) Application of membrane bioreactor technology in treating high strength industrial wastewater: a performance review. Desalination, 305 . pp. 1-11. ISSN 0011-9164

Ahmad Sharif, Noor Fadzliana (2012) Preparation and characterization of epoxidized natural rubber (ENR-50) toughened polyamide 6/ halloysite nanotube composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad Zaini, Muhammad Abbas and Che Yunus, Mohd. Azizi and Amano, Yoshimasa and Machida, Motoi (2012) Relationship between helium degassing of cattle-manure-compost adsorbents and copper ions removal. International Journal of Organic Chemistry, 2 . pp. 262-266. ISSN 2161-4695

Ahmed, M. Murtala and Nasri, Noor Shawal and Hamza, D. Usman (2012) Biomass as a renewable source of chemicals for industrial applications. International Journal of Engineering Science and Technology (IJEST), 4 (2). pp. 721-730. ISSN 0975-5462

Akhtar, Javaid and Saidina Amin, Nor Aishah (2012) A review on operating parameters for optimum liquid oil yield in biomass pyrolysis. Renewable and Sustainable Energy Reviews, 16 (7). pp. 5101-5109. ISSN 1364-0321

Al-Dulaimi, A. A. and Hashim, Shahrir (2012) Improving the anti-corrosion properties via surface modification for silicon dioxide by conductive polymer. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 113-118. ISSN 1823-0334

Ali, Mohamad Wijayanuddin (2012) Inherent safety index for hydrogen fuel cell system early design stage. In: Conference on Emerging Energy & Process Technology Concept 2012, 2012.

Alias, Hajar (2012) Rheology based on suspension containing titanium dioxide. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 2012.

Aly Ibrahim, Amgad Ahmed (2012) Proton conducting membrane by radiation-induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetrafluoro ethylene) film and phosphoric acid doping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Arsad, Agus (2012) Synthesis and characterization of metal stearates as thermo pro-oxidative additives. In: Proceding in UMT 11th International Annual Symposium on Sustainaility Science and Management, UMTAS 2012, 2012.

Arsad 1986-, Nur Husnina (2012) Studies on the oil yield, antioxidant activities and solubility from the extraction of pithecellobium jiringan jack seeds using supercritical carbon dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Asgharzadehahmadi, Seyed Ali (2012) Synthesis and characterization of polyacrylamide based hydrogel containing magnesium oxide nanoparticles for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Awad, Hassan M. and Diaz, Richard and Malek, Roslinda A. and Othman, Nor Zalina and Abdul Aziz, Ramlan and El Enshasy, Hesham Ali (2012) Efficient production process for food grade acetic acid by acetobacter aceti in shake flask and in bioreactor cultures. E-Journal of Chemistry, 9 (4). pp. 2275-2286. ISSN 0973-4945

Azarpour, Abbas and Zahedi, Gholamreza (2012) Hybrid dynamic modeling of 4-CBA hydrogenation fixed-bed catalytic reactor of PTA production plant. Computer Aided Chemical Engineering, 31 . pp. 1667-1671. ISSN 1570-7946

Azarpour, Abbas and Zahedi, Gholamreza (2012) Performance analysis of crude terephthalic acid hydropurification in an industrial trickle-bed reactor experiencing catalyst deactivation. Chemical Engineering Journal, 209 . pp. 180-193. ISSN 1385-8947

B

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab and Jamili, Ahmad (2012) Estimation of crude oil salt content using a simple predictive tool approach. Journal of Petroleum Science and Engineering, 96-97 . pp. 68-72. ISSN 0920-4105

Bakeri, Gh. and Ismail, Ahmad Fauzi and Rahimnejad, M. and Matsuura, T. and Rana, D. (2012) The effect of bore fluid type on the structure and performance of polyetherimide hollow fiber membrane in gas-liquid contacting processes. Separation and Purification Technology, 98 . pp. 262-269. ISSN 1383-5866

Balakrishnan, Harintharavimal and Hassan, Azman and Isitman, Nihat Ali and Kaynak, Cevdet (2012) On the use of magnesium hydroxide towards halogen-free flame-retarded polyamide-6/polypropylene blends. Polymer Degradation and Stability, 97 (8). pp. 1447-1457. ISSN 0141-3910

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bee, Soo-Tueen and Hassan, Azman and Ratnam, Chantara T. and Tee, Tiam-Ting and Lee, Tin Sin (2012) Effects of montmorillonite on the electron beam irradiated alumina trihydrate added polyethylene and ethylene vinyl acetate nanocomposite. Polymer Composites, 33 (11). pp. 1883-1892. ISSN 0272-8397

Bhatti, Inamullah (2012) Separation of carbon dioxide from natural gas by emulsion liquid membrane in rotating disc contractor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

C

Chan, Mieow Kee and Idris, Ani (2012) Modification of cellulose acetate membrane using monosodium glutamate additives prepared by microwave heating. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2115-2123. ISSN 1226-086X

Chang, Hui Quin (2012) Preparation of water-in-oil-in-water emulsions by repeated premix cellulose acetate membrane emulsification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chelliah, Kumutha (2012) Random mutagenesis of NS1 protein of influenza a H1N1 and docking of RNA aptamers to wild type and mutant NSI proteins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Cheshmehgaz, Hossein Rajabalipour (2012) Polar-based multiple multi-objective evolutionary algorithms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chezghani, Mohsen (2012) A graphical method for simultaneous targeting and design of multiple utility systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chong, K. C. and Lai, S. O. and Lau, Woei Jye and Lee, K. M. and Ooi, B. S. (2012) A study of computational fluid dynamics on membrane module in membrane distillation. In: ICIMTR 2012 - 2012 International Conference on Innovation, Management and Technology Research. IEEE, New York, USA, pp. 174-178. ISBN 978-146730655-3

Chua, Lee Suan and Sarmidi, Mohamad Roji and Shamsul Annuar, Nur Arbainah (2012) Triacylglycerols in non heat treated virgin cocunut oil. In: 4th International Conference on Biotechnology for the Wellness Industry, 20-21 June, 2012, Kuala lumpur, Malaysia.

D

Dahalan, Farrah Aini (2012) Development and characterization of phototrophic aerobic granular sludge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, Noorol Jannah (2012) Carbon footprint calculator for a typical campus in Malaysia using life cycle assessment approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehbari, Nazila (2012) The effects of kenaf core on properties of polylactic acid biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehghani, Alireza (2012) Mechanical and thermal properties of Montmorillonite filled date palm leaf fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Deirram, Nayeleh (2012) Hydrolysis degradation of polycarbonate by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Devanai, Kannan (2012) Modification of polyethersulfone incorporated with polyvinylpyrrolidone - iodine via phase inversion and ultraviolet photo grafting for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

E

Elfagaih, Fawzi Mohamed Amin (2012) Catalytic performance and optimization of hydrodesulfurization and naphtha reforming for clean fuels production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

F

Fadzilah @ Adibah Abd Majid, (2012) Basic research: aetiology and pathogenesis. In: europerio7, 41066.

Fauzi, Mohd. Iqram (2012) Growth of U937 cell in static and suspension culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

G

Ghanbari, Taravat (2012) Effect of coupling agent and binder in kenaf paper on the mechanical and morphological properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ghodsiyeh, Danial (2012) Optimization of machining parameters while wedming titanium alloy (T16AL4V). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

H

H'ng, Wei Chang (2012) Optimization of high cell mass cultivation of Rhizobium trifolii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamid, Yasin (2012) Mechanical, morphological and water absorption properties of waste Eurycoma Longifolia fiber/montmorillonite reinforced poly (vinyl chloride) hybrid composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamzah, Fazlena (2012) Simultaneous saccharification and fermentation of microwave - alkali pre-treated oil palm empty fruit bunch fiber for lactic acid production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasanudin, Redza Shah Azmeer (2012) Hydrogen production from catalytic steam reforming of acetic acid with nickel/cobalt supported by lanthanum (III) oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim, Haslenda (2012) Scheduling of integrated green electricity generation from agro-waste for eco-communities. In: International Conference on Recycling and Reuse 2012, 4-6 Jun, 2012, Istanbul, Turkey.

Hashim, Shahrir and Abdul Majid, Rohah (2012) Release kinetics of urea fertilizer from oil palm empty fruit bunch grafted polyacrylic acid (OPEFB-g-PAA) hydrogels. In: National Symposium On Polymeric Materials (NSPM 2012), 3-5 October, 2012, Penang, Malaysia.

Hassan, Azman (2012) Study on mechanical properties and crystallization behavior of poly (ethylene terephthalate) reinforced date palm leaf fiber montmorillonite nanocomposites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM-8), 2012.

Hassan, Azman (2012) Study on mechanical properties of recyled poly(ethyleneterephthalate) reinforced date palm fiber composite. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 2012.

Hassan, Azman and Wahit, Mat Uzir (2012) The effect of organoclay contents on the mechanical and morphological properties rubber toughened polyamide 6 nanocomposites. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Hassan, Mohamud Abukar (2012) Optimization of maximum demand of electrical energy system using distributed generation technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassim, Mimi Haryani and Hurme, M. and Aziz, N. N. N. A. (2012) Computer aided estimation of fugitive emission rates and occupational air concentration in process design. Computer Aided Chemical Engineering, 30 . pp. 77-80. ISSN 1570-7946

Hassim, Mimi Haryani and Hurme, Markku and Edwards, David W. and Aziz, Nik N. N. A. and Rahim, Fariha L. M. (2012) Simple graphical method for inherent occupational health assessment. Process Safety and Environmental Protection . ISSN 0957-5820

Hassim, Mimi Haryani and Pirdashti, Mohsen and Darvish, Vahid (2012) Variational inequalities for chemical process design. Brazilian Journal of Chemical Engineering, 29 (n/a). pp. 1-8. ISSN 0104-6632

Hassim, Mimi Haryani (2012) Harvesting solar energy for cleaner and healthier biomass town. In: International Conference on PSE Asia 2013, 2012.

Hassim, Mimi Haryani (2012) Multi-objective optimization for process synthesis of sustainable palm oil processing complex. In: International Conference on PSE Asia 2013, 2012.

Hassim, Mimi Haryani and Hurme, Markku and Amyotte, Paul R. and Khan, Faisal I. (2012) Fugitive emissions in chemical processes: the assessment and prevention based on inherent and add-on approaches. Journal of Loss Prevention in the Process Industries, 25 (5). pp. 820-829. ISSN 0950-4230

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) The effect of nanoparticles on gastrointestinal release from modified Kappa-carrageenan nanocomposite hydrogels. Carbohydrate Polymers, 89 (1). pp. 138-145. ISSN 0144-8617

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) Effect of natural cross-linker on swelling and structural stability of kappa-carrageenan/hydroxyethyl cellulose pH-sensitive hydrogels. Korean Journal of Chemical Engineering, 29 (11). pp. 1647-1655. ISSN 0256-1115

Hezaveh, Hadi and Muhamad, Ida Idayu and Noshadi, Iman and Fen, Lim Shu and Ngadi, Norzita (2012) Swelling behaviour and controlled drug release from cross-linked kappa-carrageenan/NaCMC hydrogel by diffusion mechanism. Journal of Microencapsulation, 29 (4). pp. 368-379. ISSN 0265-2048

Ho, W. S. and Hashim, Haslenda and Hassim, Mimi Haryani and Ab. Muis, Zarina (2012) Design of distributed energy system through electric system cascade analysis (ESCA). Applied Energy, 99 .  309-315. ISSN 0306-2619

Husin, Muhamad Rasyidi (2012) Hydroxyapatite and montmorillonite filled high density polyethylene hybrid composites for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hussain, Mohd. Azlan and Abdul Manan, Zainuddin and Aziz, Norashid (2012) Recent developments on PSE education and research in Malaysia. Computer Aided Chemical Engineering, 31 . pp. 70-74. ISSN 1570-7946

Hussein, Shwan Hassan (2012) Nystrom method for solving non-uniquely solvable interior Riemann-Hilbert problem on region with corners via integral equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

I

Ibnu Rasid, Elda Nurafnie (2012) Production of astaxanthin from microalgae. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibrahim, Norazana and Md. Kasmani, Rafiziana and Rasit Ali, Roshafima (2012) The combustion behaviour of flash pyrolysis oil. In: 26th Symposium of Malaysian Chemical Engineers (SOMChE-2012) and 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), 21-23 November, 2012, Sabah, Malaysia.

Idris, Ani (2012) Effect of organic and aqueous dispersion medium on the development of polystyrene nanoparticles in nanoprecipitation method. In: Regional Annual Fundamental Science Symposium 2012 (RAFSS 2012), 2012.

Idris, Ani (2012) Effect of photoperiod on the growth of unicellular microalgae nannochloropsis sp. In: The 2012 International Conference On Agriculturel, Food And Biological Engineering (ICAFBE 2012), 2012.

Idris, Ani and Misran, E. and Mohd. Yusof, Noordin (2012) Photocatalytic reduction of Cr(VI) by PVA-alginate encapsulated γFe 2O 3 magnetic beads using different types of illumination lamp and light. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2151-2156. ISSN 1226-086X

Idris, Ani and Mohd. Ismail, Nur Suriani and Hassan, Nursia and Misran, Effaliza and Ngomsik, Audrey Flore (2012) Synthesis of magnetic alginate beads based on maghemite nanoparticles for Pb(II) removal in aqueous solution. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 1582-1589. ISSN 1226-086X

Idris, Ani and Mohd. Yusof, Noordin (2012) Treatment of Cr(VI) using PVA-alginate ferro photo gels under different types of lamps. In: The 2012 International Conference on Agriculturel, Food and Biological Engineering (ICAFBE 2012), 11-13 May, 2012, Guangzhou, China.

Idris Noordin, Ani (2012) Lignin extraction from oil palm trunk by microwave-alkali technique. In: Regional Annual Fundamental Science Symposium 2012 (RAFSS 2012), 2012.

Ilbeygi, Hamid (2012) Electerochemical study of sulfonated poly ether ether ketone nanocomposite membrane for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

J

Jalalvandi, Esmat (2012) Polylactic acid/thermoplastic starch/montmorillonite nanocomposite : morphological, tensile properties, water absortion and degradation behavior. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Jamaludin, Azmir (2012) Removal of free fatty acid from crude palm oil using organic solvent nanofiltration (OSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Anwar (2012) Optimal tailor-made green gasoline for car engine using FLUENT. In: Conference of Emerging Energy and Process Technology (CONCEPT 2012), 2012.

Johari, Anwar (2012) Optimization model for Tanjung Bin coal fired power station with CO2 emission consideration. In: Conference of Emerging Energy and Process Technology (CONCEPT 2012), 2012.

Jonet, Mohd. Anuar (2012) Extracellular protein secretion optimization in Escherichia coli by signal peptide mutation and additive supplementation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

K

Karim, A. H. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Sidik, S. M. and Kamarudin, N. H. N. and Jusoh, R. and Jusoh, N. W. C. and Hameedc, B. H. (2012) Amino modified mesostructured silica nanoparticles for efficient adsorption of methylene blue. Journal of Colloid and Interface Science, 386 (1). pp. 307-314. ISSN 0021-9797

Karim, Ainul Hakimah and Abd. Jalil, Aishah and Triwahyono, Sugeng and Kamarudin, Nur Hidayatul Nazirah and Muhamad Salleh, Nur Fatien and Ab Aziz, Muhammad Arif (2012) Adsorptive removal of methylene blue in aqueous solution onto mesostructured silica nanoparticles. In: The 5th International Conference on Postgraduate Education (ICPE-5 2012) , 18 & 19 December 2012 , Dewan Sultan Iskandar (DSI), Universiti Teknologi Malaysia ( UTM), Johor Bahru .

Kashinath, Shah Aznie Ariffin and Abdul Manan, Zainuddin and Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Design of green diesel from biofuels using computer aided technique. Computers & Chemical Engineering, 41 . 88-92  . ISSN 0098-1354

Kiakalaieh, Amin Talebian (2012) Optimization and kinetic model for transesterification of waste cooking oil using tungstophosphoric acid catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kidam, Kamarizan and Hurme, Markku (2012) Origin of equipment design and operation errors. Journal of Loss Prevention in the Process Industries, 25 (6). 937–949. ISSN 0950-4230

Kunjirama, Magendran (2012) Adsorption of mercury onto 3-ureidopropyltriethoxysilane grafted empty fruit bunches biosorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

L

Lai, Jau Choy (2012) Characterization and ageing studies of plasticized sago pith waste composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Laliliannosrati, Hamidreza (2012) Microwave assisted two step in situ method for biodiesel production from jatropha Curcas L. Seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lawal, Musa and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) A systematic method for cost-effective carbon emission reduction in buildings. Journal of Applied Sciences, 12 (11). pp. 1186-1190. ISSN 1812-5654

Lee, Chew Tin (2012) Photoproduction of indole-3-acedic acid by rhodopseudomonas palustris. In: Proceeding of 4th International Conference on Biotechnology for the Wellness Industry (ICBWI 2012), 20-21 August 2012, Renaissance Hotel, Kuala Lumpur., 2012.

Lee, Chew Tin and Chua, Lee Suan and Sarmidi, Mohamad Roji and Razali, Firdausi (2012) Effect of effective microorganisme on carbon mineralization during composting. In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20-21 June 2012, Kuala Lumpur, Malaysia.

Lee, Suan Chua and Abdul Rahaman, Norul Liza and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2012) Multi-elemental composition and physical properties of honey samples from Malaysia. Food Chemistry, 135 (3). pp. 880-887. ISSN 0308-8146

Lee, Suan Chua and Alitabarimansor, Meisam and Lee, Chew Tin and Mat, Ramli (2012) Hydrolysis of virgin coconut oil using immobilized lipase in a batch reactor. Enzyme Research, 2012 . pp. 1-5. ISSN 2090-0414

Lingli, Deng and Cheng, Kian Kai and Jiyang, Dong and Julian, L. Griffin and Zhong, Chen (2012) Non-negative principal component analysis for NMR-based metabolomic data analysis. Chemometrics and Intelligent Laboratory Systems, 118 . pp. 51-61. ISSN 0169-7439

M

Madadi Ardekani, Sara (2012) Mechanical and thermal properties of Montmorillonite filled newspaper fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Marandi, Reza and Hashim, Shahrir and Zahedi, Gholamreza (2012) Hydrodynamic and heat transfer modeling of polydisperse fluidized bed olefin polymerization reactors. Computer Aided Chemical Engineering, 30 . pp. 1053-1057. ISSN 1570-7946

Masri, M. H. J. and Maftoun, P. and Abdul Malek, Roslinda and Othman, Nor Zalina and Sarmidi, Mohamad Roji and Aziz, Ramlan and El Enshasy, Hesham Ali (2012) Effect of C:N Ratio on the kinetics of cell growth and pleuran production by pleurotus ostreatus. In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20-21 June 2012, Kuala Lumpur, Malaysia.

Mat, Ramli (2012) Field investigation of PM2.5 and PM10 measurements from a medical waste incineration plant using virtual impactors. In: MJIIT-JUC Joint Symposium 2012, November 21-23, 2012, Kuala Lumpur, 2012.

Mazila Ramli, Aizi Nor (2012) Molecular, enzymatic and structural analysis of a novel chitinase from Glaciozyma antarctica PI12 for cold adaptation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Sarip, Mohd. Sharizan (2012) Subcritical water extraction of 6-gingerol and 6-shogaol from zingiber officinale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mili, Norlisa (2012) Formulation of emulsion liquid membrane for reactive dye removal from aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Amin, Mohamed Afizal (2012) Development of sulfonation poly ether ether ketone membrane for microbial fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Esivan, Siti Marsilawati (2012) Prediction of lactic acid concentration using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammad Fauzi, Ahmad Hafiidz and Saidina Amin, Nor Aishah (2012) An overview of ionic liquids as solvents in biodiesel synthesis. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5770-5786. ISSN 1364-0321

Mohd. Hanafi@Hanafiah, Mohd. Mukrish (2012) The photoprotective and collagen stimulatory effects of labisia pumila var pumila extract on UVB irradiated human skin fibroblast (HSF1184) cells. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Muji, Siti Zarina (2012) Optical tomography for solid gas measurement using mixed projection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Nawi, Norazlina (2012) Encapsulation of anthocyanins from Ipomoea Batatas using microwave drying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Rosnan, Rizuan (2012) Rheological, mechanical, morphological and thermal properties ofr ecycled poly (ethylene terephthalate)- polythylene filled montmorillonite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Setapar, Siti Hamidah and Mohamad Aziz, S. N. and Harun, N. H. and Mohd. Azizi, C. Y. (2012) Review on the extraction of biomolecules by biosurfactant reverse micelles. APCBEE Procedia, 3 . pp. 78-83. ISSN 1022-6680

Mohd. Sueb, Mohd. Shafiq (2012) Efficient cultivation of Kluyveromyces Lactics in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Tahir, Lokman (2012) Analisis agihan kos operasi sekolah di Sekolah Menengah Indonesia : kajian kes di Makassar. In: Seminar Kebangsaan Majelis Dekan Pendidikan IPTA 2012, 7 - 9 October 2012, The Zon Regency, Johor Bahru, Malaysia.

Mohsin, Rahmat and Abdul Majid, Zulkifli (2012) Engine performance and emission characteristic of diesel dual fuel engine fueled with biodiesel- diesel fuel blends. In: International Conference on Biomass for Biofuel and Value Added, 23rd - 24th October 2012 , Kuala Lumpur, Malaysia .

Moslehyani, Ali (2012) Silver ion exchange fillers incoporated with mixed matrix membrane for antibacterial application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhamad, Ida Idayu and Che Yunus, Mohd. Azizi and Sarmidi, Mohamad Roji and Idham, Zuhaili (2012) Physicochemical characteristics and temperature degradation of red natural colourant from hibiscus sabdariffa anthocyanins. In: 4th International Conference on Biotechnology for The Wellness Industry : Wellness for Health and Productivity : New Trends, Challenges and Opportunity, 20-21 Jun, 2012, Kuala Lumpur, Malaysia.

Muhammad Munir, Sadiq and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2012) Holistic carbon planning for industrial parks: a waste-to-resources process integration approach. Journal of Cleaner Production, 33 . pp. 74-85. ISSN 0959-6526

Muhammad Sani, Shehu (2012) Optimization of sludge disintegration from IWK-bunus sewage treatment plant for enhanced biogas yield. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mustapha, Mahfuzah (2012) Shelf life of ready made paste using sorption isotherm and thermal colour degradation study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

N

Naghib, Syed Danial (2012) Preparation and characterization of magnetic nanoparticles immobilized in acrylamide based hydrogels for metal extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Nasef, Mohamed Mahmoud and Güven, Olgun (2012) Radiation-grafted copolymers for separation and purification purposes: status, challenges and future directions. Progress in Polymer Science, 37 (12). pp. 1597-1656. ISSN 0079-6700

Ng, Wendy Pei Qin and Lam, Hon Loong and Ng, Foo Yuen and Kamal, Mustafa and Lim, Joseph Heng Ee (2012) Waste-to-wealth: green potential from palm biomass in Malaysia. Journal of Cleaner Production, 34 . pp. 57-65. ISSN 0959-6526

Ngadi, Norzita (2012) Adsorption of lysozyme on stainless steel surface coated with pei-peg nanofilms. In: MICOTRIBE 2012, 2012.

Ngadi, Norzita (2012) Adsorption of Lysozyme on stainless steel surface coated with Pei-Peg nanofilms. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 2012.

Ngadi, Norzita (2012) Industrial textile wastewater treatment using hybrid flocculant derived from kenaf. In: 4Th International Conference On Chemical And Bioprocess Engineering & Somche, 2012.

Ngadi, Norzita (2012) Novel biodegradable polymeric flocculant based on kenaf for heavy metal removal. International Journal Of Chemical And Environmental Engineering, 3 (3). p. 172. ISSN 2078-0737

Ngadi, Norzita (2012) QCM-D study of a-lactalbumin adsorption on stainless steel surface coated with Polyethylene glycol (PEG) nanofilms. International Journal Of Chemical And Environmental Engineering, 3 (3). pp. 167-171. ISSN 2078-0737

Ngadi, Norzita (2012) Synthesis and characterization of renewable carbon cryogel beads from empty fruit bunch. International Journal Of Chemical And Environmental Engineering, 3 (2). pp. 15-19. ISSN 2078-0737

Ngadi, Norzita (2012) Viscosity of ehylene glycol-based nanofluids containing titania nanoparticles. In: 4Th International Conference On Chemical And Bioprocess Engineering In Conjuction With Somche, 2012.

O

Othman, Norhayani and Jazrawi, B. and Mehrkhodavandi, P. and Hatzikiriakos, S. G. (2012) Rheology and melt fracture of poly(lactides). In: Annual Technical Conference - ANTEC, Conference Proceedings. Society of Plastics Engineers (SPE), Newtown, USA, pp. 1170-1174. ISBN 978-162276083-1

P

Pandian, Santha and Hassim, Mimi Haryani and Hurme, Markku (2012) Computer aided assessment of occupationally healthier processes during research and development stage. Computer Aided Chemical Engineering, 31 . pp. 270-274. ISSN 1570-7946

Peng, Yen Liew and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2012) A numerical analysis for total site sensitivity. Computer Aided Chemical Engineering, 31 . pp. 560-564. ISSN 1570-7946

Phang Abdullah, Fatin Aliah and Mohd. Yusof, Khairiyah and Syed Hassan, Syed Helmi and Hassim, Mimi H. (2012) Engineering students' perception on learning through cooperative problem-based learning (CPBL) for the first time. In: 2012 ASEE Inaugural International Forum, 9 - 10 June 2012, Riverwalk San Antonio.

R

R., Dayana Amira and A. Rahman, Roshanida and Md. Illias, Rosli (2012) Effects of xylanase and cellulase production during composting of EFB and POME using fungi. International Journal of Engineering and Applied Sciences, 6 . pp. 292-295. ISSN 2010-3999

Rahaeifard, M. and Then, C. and Wan Mustapha, W. A. and Othman, N .Z. and Sarmidi, Mohd. Roji and Aziz, R. A. and El Enshasy, Hesham (2012) Isolation and optimization of biomass production of trichoderma harzianum : a biological control agent against the palm pathogen ganoderma boninense. In: The 4th. International Conference on Biotechnology for the Wellness Industry (4th. ICBWI), 17 - 18 March , 2012, Bangkok, Thailand.

Rahaeifard, Mastooreh (2012) Isolation and optimization of biomass production of Trichoderma : a biological control agent against Ganoderma boninense. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rahmat, Abdul Razak (2012) The effect of chain extender on viscosity and mechanical properties of poly (buthylene terepthalate) blending with recycled poly(ethylene terephthalate)-glass fiber composite. Journal of Applied Science, 12 (3). pp. 296-300. ISSN 1812-5654

Ramli, Ros Azlinawati (2012) Synthesis and characterization of poly(acrylamide-co-acrylic acid)grafted poly(styrene-co-methyl methacrylate)microgels via semi batch emulsion polymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rasep, Zuraidah (2012) Removal of cadmium from waste water industry by using ferromagnetic photocatalyst gel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rashid, Muhammad Usman (2012) The adsorption characteristics of gold onto 3 aminopropyltriethoxysilane grafted coconut pith. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Rashidi, Saba (2012) The effects of carbon black in epoxy coating filled polyaniline/nano-zinc/carbon black on corrosion resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rasit Ali, Roshafima (2012) Influence of reaction temperature and water content on wheat straw pyrolysis. In: World Academy of Science, Engineering and Technology, 2012.

Riaz, Amjad (2012) Dynamic model of an energy efficient integrated steam reformer and methanol reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Riaz, Amjad and Zahedi, Gholamreza (2012) Embedding methane steam reformer and methanol reactor into a single reactor. Computer Aided Chemical Engineering, 31 . pp. 1170-1174. ISSN 1570-7946

Rohani, Behzad and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saqr, Khalid M. (2012) Comparison of eddy dissipation model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 384-391. ISBN 978-073541032-9

S

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara T. (2012) Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications. Polymer Degradation and Stability, 97 (8). pp. 1432-1437. ISSN 0141-3910

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2012) Electron beam irradiation of low-density polyethylene filled with metal hydroxides for wire and cable applications. Polymer Bulletin, 69 (9). pp. 1103-1114. ISSN 0170-0839

Sadighi, Sepehr (2012) Modeling of vacuum gas oil hydrocracking process using lumping approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Saidina Amin, Nor Aishah and Misson, Mailin and Haron, Roslindawati and Ahmad Kamaroddin, Mohd. Fadhzir and Wan Omar, Wan Nor Nadyaini and Kok, Giap Haw (2012) Bio-oils and diesel like fuel derived from alkaline treated empty fruit bunch (EFB). International Journal of Biomass and Renewables, 1 (1). pp. 6-14. ISSN 2289-1692 (Electronic)

Samsudin, Sani Amril (2012) Isothermal crystallization of polypropylene/polystyrene blends. In: Proceeding of MAMIP2012 Asian International Conference on Materials, Minerals and Polymer, 2012.

Sarmidi, Mohamad Roji (2012) Bioprocess optimization for efficient polysaccharide production by lactobacillus kefiranofaciens in semi-industrial scale. In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 2012.

Sarmidi, Mohamad Roji (2012) Growth stimulatory effect of labisia pumila extract on human skin fibroblast cells (HSF1184) cultured in serum free media. In: 4th International Conference on Biotechnology for the Wellness Industry : Wellness for Health and Productivity : New Trends, Challenges and Opportunity, 20-21June 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohamad Roji (2012) The potential of entomopathogenic fungus, beauveria bassiana as a biological control agent against the oil palm major pest, Metisa Plana (Walker). In: 4th International Conference On Biotechnology For The Wellness Industry, 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Abdul Hamid, Mariani (2012) The effect of labisia pumilla extract towards UVR-induced keratinocytes. In: 4th International Conference On Biotechnology For The Wellness Industry, 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Ali El-Enshasy, Hesham Ali Metwally (2012) Biotechnology for wellness industry: concepts and biofactories. International Journal of Biotechnology for Wellness Industries (IJBWI), 1 (1). pp. 3-28. ISSN 1927-3037

Sarmidi, Mohamad Roji and Aman Nor, Nor Farahiyah and Mohamed, Muna and Shamsul Annuar, Nur Arbainah and Ngadiran, Sulaiman (2012) The quality factors of non-heated virgin coconut oil (VCO) using the upgraded integrated wet process. In: 4th International Conference On Biotechnology For The Wellness Industry, 20-21 June, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Aziz, Ramlan and El Enshasy, Hesham Ali and Abdul Malek, Roslinda and Othman, Nor Zalina (2012) Industrial platform design for yeast probiotic: batch and fed batch cultivation of kluyveromyceslactis in High Density Culture (HCDC). In: 4th International Conference on Biotechnology for the Wellness Industry, 20 - 21 May 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohamad Roji and Chua, Lee Suan (2012) The scientific research of microbial composting: metabolite profiling and kinetics study. In: Proceeding of 4th International Conference on Biotechnology for the Wellness Industry (ICBWI 2012), 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohamad Roji and Hanapi, Siti Zulaiha and Mat Sarip, Siti Hajar (2012) Determination of pathogen survival in biofertilizers. In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20 - 21 June 2012, Kuala Lumpur, Malaysia.

Sarmidi, Mohamad Roji and Mohamed, Muna (2012) The study of physicochemical properties and sensory evaluation of vanilla ice cream containing virgin coconut oil (VCO). In: 4th International Conference On Biotechnology For The Wellness Industry : Wellness For Health And Productivity : New Trends, Challenges And Opportunity, 20-21 May, 2012, Kuala lumpur, Malaysia.

Sarmidi, Mohd. Roji and R, Aziz and El Enshasy, Hesham (2012) Isolation and identification of new chitinase-producer strain streptomyces glauciniger wicc A03: an effective biocontrol agent against plants phytopathogen fungi (B2-3). In: The 4th. International Conference on Biotechnology for the Wellness Industry (4th. ICBWI), 20 - 21 June 2012, Kuala Lumpur, Malaysia.

Sayid Abdullah, Sharifah Hanis Yasmin (2012) Treatment of simulated refinery based sulfidic spent caustic using photo-fenton oxidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Setiabudi, H. D. and Abdul Jalil, Aishah and Triwahyono, Sugeng (2012) Ir/Pt-HZSM5 for n-pentane isomerization: effect of iridium loading on the properties and catalytic activity. Journal of Catalysis, 294 . pp. 128-135. ISSN 0021-9517

Shakaib, M. and Ahmed, I. and Rosli, M. Yunus and Idris, Ani and Hussain, A. (2012) Influence of monosodium glutamate additive on the morphology and permeability characteristics of polyamide dialysis membranes. Journal of Applied Polymer Science, 128 (5). pp. 3346-3355. ISSN 0021-8995

Shakaib, Muhammad and Ahmed, Iqbal and M. Yunus, Rosli and Idris, Ani (2012) Effect of added monosodium glutamate on characteristics of polyamide dope solutions. Journal of Macromolecular Science Part B-Physics, 51 (10). pp. 2049-2063. ISSN 0022-2348 (Print); 1525-609X (Electronics)

Shams, Gholamhossein (2012) Fingerprinting of effective phytochemicals from traditional diabetes herbal medication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shamsul Annuar, Nur Arbainah (2012) Lipid and phytochemicals profiles of non heat treated virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sheikh Ali, Sheikh Imranuddin (2012) Development of bio insect-repellents using citronella, vinegar and triglycerides for commercial application. In: 4th. International Conference on Biotechnology for the Wellness Industry, 20 - 21 June 2012, Kuala Lumpur, Malaysia.

Sidik, Hayatu Umar (2012) Anaerobic co-digestion of palm oil mill effluent with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sin, Lee Tin and Wan Abdul Rahman, Wan Aizan and Rahmat, Abdul Razak and Bee, Soo Tueen and Tee, Tiam Ting and Low, Chong Yu (2012) Measurement and simple equation models of the specific heats of neat and glycerol-plasticized poly(vinyl alcohol). Journal of Vinyl and Additive Technology, 18 (3). pp. 198-203. ISSN 1083-5601

Suleiman, Mohd. Salleh (2012) Determination of optimum sodium bicarbonate injection rates for acid hydrochloric scrubbing in a clinical waste incineration plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sy. Mohamad, Sharifah Fathiyah (2012) The susceptibility of APHIDS, Aphis gossypii Glover to lauric acid based natural pesticide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Syed Muhammad, Syed Anuar Faua'ad and Patricia, Tang and Hak-Kim , Chan and Dehghani, Fariba (2012) Potential technique for the production of micronised lactose crystals by supercritical fluid conditioning. In: ISSF 2012: 10th International Symposium on Supercritical Fluids, 13-16 May, 2012, San Francisco, USA.

T

Taib, Mohd. Rozainee (2012) Health risk assessment in coal-fired power plant in Malaysia. In: Proceedings Of The 6th International Conference On Process System Engineering (PSE ASIA), 2012.

Tajuddin, Rohana (2012) Effect of rice straw as sensitizer in the microwave-induced pyrolysis of plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tuan Abdullah, Tuan Amran (2012) Slow pyrolysis of imperata cylindrica in a fixed bed reactor. In: International Conference on Bio Technology and Chemical Engineering, 2012.

W

Wahit, Mat Uzir (2012) Biodegradable poly (sorbitoll sebacate malate): mechanical and thermal properties. In: 7th ECNP 2012 Conference and/or 5th Young Scientist Conference and the 9th ECNP Short Course, 2012.

Wahit, Mat Uzir (2012) Effect of polypyrrole on the morphology, mechanical and electrical properties of high density polyethyele/montmorillonite nanocomposite. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 2012.

Wahit, Mat Uzir (2012) Oil palm fiber reinforced poly (e-caprolactone) and poly (lactic acid) composite: effect on mechanical properties. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 2012.

Wahit, Mat Uzir and Akos, Noel Ibrahim and Laftah, Waham Ashaier (2012) Influence of natural fibers on the mechanical properties and biodegradation of poly(lactic acid) and poly(e-caprolactone) composites: a review. Polymer Composites, 33 (7). pp. 1045-1053. ISSN 0272-8397

Wahit, Mat Uzir and Hassan, Azman (2012) Study on the mechanical properties of recycled poly (ethylene terephtalate) reinforced date palm fiber composite. In: Asian International Conference on Materials, Minerals and Polymer (MAMIP 2012), 23-24 March, 2012, Penang, Malaysia.

Wai, Shin Ho and Hashim, Haslenda and Ab. Muis, Zarina (2012) Integrated biomass power plant and storage for peak load management. Computer Aided Chemical Engineering, 31 . pp. 1000-1004. ISSN 1570-7946

Wan Abdul Rahman, Wan Aizan and A. Majid, Rohah (2012) Effect of different solvents on the thermal, IR spectroscopy and morphological properties of solution casted PLA/starch films. In: Regional Annual Fundamental Science Symposium 2012 (RAFSS 2012), 10 - 13 December 2012, Johor, Malaysia.

Wan Abdul Rahman, Wan Aizan and A. Majid, Rohah (2012) The effect of mercerization process on the structural and morphological properties of pineapple leaf fiber (PALF) pulp. In: Regional Annual Fundamental Science Symposium 2012 (RAFSS 2012), 10-13 December, 2012, Johor Bahru, Johor.

Wan Ahmad, Wan Haslinda and Abdul Karim, Norsuhada and Ahmad, Wan Azlina and Zakaria, Zainul Akmar (2012) Cr(VI) reduction by acinetobacter haemolyticus in rich and agricultural waste medium & rsquo. In: The Fifth Annual Conference On The Challenges In Environmental Science And Engineering-CESE 2012, 9 – 13 September 2012, Melbourne, Australia.

Wan Alwi, Sharifah Rafidah (2012) A targeting method for hybrid power systems with energy losses. In: 15th Conference "Process Integration, Modelling and Optimisation for Energy Saving and Polution Reduction" (PRES 2012), 2012.

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Misman, M. (2012) A new tool for simultaneous targeting and design of heat exchanger networks. Computer Aided Chemical Engineering, 31 . pp. 1547-1551. ISSN 1570-7946

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Sun, Kheen Nama (2012) A new method to determine the optimum heat exchanger network approach temperature. Computer Aided Chemical Engineering, 31 . pp. 190-194. ISSN 1570-7946

Wan Alwi, Sharifah Rafidah and Mohammad Rozali, Nor Erniza and Abdul Manan, Zainuddin and Klemeš, Jiri Jaromír (2012) A process integration targeting method for hybrid power systems. Energy, 44 (1). pp. 6-10. ISSN 0360-5442

Wan Alwi, Sharifah Rafidah and Peng, Yen Liew and Varbanov, Petar Sabev and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2012) A numerical tool for integrating renewable energy into total sites with variable supply and demand. Computer Aided Chemical Engineering, 30 . pp. 1348-1351. ISSN 1570-7946

Wang, Jun Jie (2012) Optimization study on recovery hydrocarbons from pyrolysis oil using ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Y

Ya'aini, Nazlina (2012) Levulinic acid production from lignocellulosic biomass using hy zeolite supported chromium catalyst in ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yaakob, Harisun and Ahmed, Nor Rashidah and Daud, Siti Khairunnisa and Abdul Malek, Roslinda and Abdul Rahman, Roshanida (2012) Optimization of ingredient and processing levels for the production of coconut yogurt using response surface methodology. Food Science and Biotechnology, 21 (4). pp. 933-940. ISSN 1226-7708(Print); 2092-6456(Electronic)

Yanwarizal, Yanwarizal (2012) Continuous individual plot curves technique for simultaneous targeting and design of a mass exchange network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ya’aini, Nazlina and Saidina Amin, Nor Aishah and Mohammed Yussuf, Mohd Asmadi (2012) Optimization of levulinic acid from lignocellulosic biomass using a new hybrid catalyst. Bioresource Technology, 116 . pp. 58-65. ISSN 0960-8524

Yusuf, Rafiu O. and Noor, Zainura Zainon and Moh'd. Din, Moh'd. Fadhil and Abba, Ahmad H. (2012) Use of sewage sludge ash (SSA) in the production of cement and concrete - a review. International Journal Of Global Environmental Issues, 12 (2-4). pp. 214-228. ISSN 1466-6650

Z

Zailani, Siti Nazrah (2012) Removal and recovery of reactive dye from aqueous solution using emulsion liquid membrane process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zainal Alam, Muhd. Nazrul Hisham and Schäpper, Daniel and Gernaey, Krist V. (2012) Establishment of a gaseous pH cont rol concept in microbioreactors. In: 2012 International Conference on Environment, Energy and Biotechnology, 5th - 6th May 2012 , Kuala Lumpur, Malaysia.

Zakaria, Zainoha and Linnekoski, J. and Saidina Amin, Nor Aishah (2012) Catalyst screening for conversion of glycerol to light olefins. Chemical Engineering Journal, 207-08 . pp. 803-813. ISSN 1385-8947

Zamzuri, Nurul Huda (2012) Production of hydrogen by steam reforming of glycerol over nickel supported catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zarei, Alireza (2012) Optimization of biodiesel production from jatropha oil using immobilized lipase. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2012) Development of a fuzzy system model for candidate-well selection for hydraulic fracturing in a carbonate reservoir. In: Society of Petroleum Engineers - Spe Oil and Gas India Conference and Exhibition 2012, Ogic - Further, Deeper, Tougher: The Quest Continues... Society of Petroleum Engineers, Richardson, Texas, pp. 148-172. ISBN 978-1-61399-192-3

This list was generated on Thu Dec 18 04:29:29 2014 MYT.