Items where Division is "Mechanical Engineering" and Year is 2012

Article

A., Norhayati and Maizan, S. and Zin, H. M. and Yahya, Wira Jazair and Wan Nik, Wan Sani and Samion, Syahrullail (2012) The influence of lubricant viscosoty in cold work forward extrusion using micro-pits tool. Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 89-93. ISSN 0127-9696

A., Norhayati and S., Maizan and H. M., Zin and J. Y., Wira and W. B., Wan Nik and Samion, Syahrullail (2012) The influence of lubricant viscosity in cold work forward extrusion using micro-pits tool. Jurnal Teknologi, 58 (2). pp. 89-93. ISSN 2231-7376

A., Norhayati and Wira, J. Y. and Mohd. Zin, H. and Syahrullail, Syahrul (2012) A new method to maintain lubricant layer in extrusion process. AIP Conference Proceedings, 1440 . pp. 894-899. ISSN 0094-243X

A. Jalil, Siti Zura and Taib, Mohd. Nasir and Abdullah, Hasnain and Mohd. Yunos, Megawati (2012) Characteristic of human arm frequency radiation. Progress in Electromagnetics Research Symposium . pp. 250-254. ISSN 1559-9450

Aarabi, Majid and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Azadnia, Amir Hossein and Zakuan, Norhayati (2012) A comparative study on critical success factors (CSFS) of ERP systems implementation among SMEs and large firms in developing countries. International Journal of Advancements in Computing Technology, 4 (9). pp. 226-239. ISSN 2005-80399 (Print); 2233-9337 (Electronics)

Abd. Al-Rahman, Lamyaa and Raja, Raja Ishak and Abdul Rahman, Roslan (2012) Attenuation of noise by using absorption materials and barriers: a review. International Journal of Engineering & Technology, 2 (7). pp. 1207-1217. ISSN 2049-3444

Abd. AL-Rahman, Lamyaa and Raja Hamzah, Raja Ishak and Abdul Rahman, Roslan and Ibrahim, Zawawi (2012) Acoustic properties of innovative material from date palm fibre. American Journal of Applied Sciences, 9 (9). pp. 1390-1395. ISSN 1546-9239 (Print); 1554-3641 (Electronic)

Abdelrhman, Ahmed Mohammed and Leong, M. Salman and M. Saeed, Somia Alfatih and Al-Obaidi, Salah (2012) A review of vibration monitoring as a diagnostic tool for turbine blade faults. Applied Mechanics and Materials, 229-23 . pp. 1459-1463. ISSN 1660-9336

Abdi, Behzad and Ismail, Yob Saed and Amran, Ayob and Abdullah, R. A. and Yahya, Mohd. Yazid (2012) Multi-objective optimization of filament wound composite pressure vessels based on weight and matrix cracking/ burst pressure using imperialist competitive algorithm. Applied Mechanics and Materials, 234 . pp. 34-38. ISSN 1660-9336

Abdi, Behzad and Mozafari, Hamid and Amran, Ayob (2012) Find the optimum shape design of externally pressurized torispherical dome ends based on buckling pressure by using imperialist competitive algorithm and genetic algorithm. Applied Mechanics And Materials, 110-11 . pp. 956-964. ISSN 1660-9336

Abdi, Behzad and Mozafari, Hamid and Amran, Ayob and Kohandel, Roya (2012) Imperialist competitive algorithm for multiobjective optimization of ellipsoidal head of pressure vessel. Applied Mechanics And Materials, 110-11 . pp. 3422-3428. ISSN 1660-9336

Abdi, Behzad and Mozafari, Hamid and Amran, Ayob and Kohandel, Roya (2012) Optimum size of a ground-based cylindrical liquid storage tank under stability and strength constraints using imperialist competitive algorithm. Applied Mechanics And Materials, 110-11 . pp. 3415-3421. ISSN 1660-9336

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran and Kohandel, Roya (2012) Buckling behavior of clamped laminated composite cylindrical shells under external pressure using finite element method. Applied Mechanics And Materials, 121-12 . pp. 43-47. ISSN 1660-9336

Abdi, Behzad and Rahimian Koloor, Seyed Saeid and Abdullah, M. R. and Amran, Ayob and Yahya, Mohd. Yazid (2012) Effect of strain-rate on flexural behavior of composite sandwich panel. Applied Mechanics and Materials, 229-23 . pp. 766-770. ISSN 1660-9336

Abdol Azis, Mohd. Hazmil Syahidy and Che Sidik, Nor Azwadi (2012) Analysis of bouyancy-aided convection heat transfer from horizontal cylinder at low Reynolds number. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 49-56. ISSN 0094-243X

Abdolahi, Abdolahi and Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2012) Corrosion protection of steels: a brief review on conductive polymers. Malaysian Polymer Journal, 7 (1). pp. 16-21. ISSN 1823-7789

Abdolahi, Ahmad and Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2012) Synthesis of uniform polyaniline nanofibers through interfacial polymerization. Materials, 5 (8). pp. 1487-1494. ISSN 1996-1944

Abdul Halim, Zulhelmi Alif and Akram, Ahmad and Mat Yajid, Muhamad Azizi (2012) Morphological study of RF magnetron sputtered silicon thin films on aisi 304 stainless steel. Jurnal Teknologi (Sciences and Engineering), 59 (SUP. 3). pp. 83-86. ISSN 0127-9696

Abdul Hamid, Mohd. Kameil and Stachowiak, Gwidon (2012) Effects of external hard particles on brake friction characteristics during hard braking. Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 53-58. ISSN 0127-9696

Abdul Raman, Norazmein and Sharif, Safian and Izman, Sudin (2012) Mathematical modeling of cutting force in milling of medium density fibreboard using response surface method. Advanced Materials Research, 445 . pp. 51-55. ISSN 1022-6680

Abdul Wahid, Mazlan and Ahmad Faiz, M. Z. and M. Saqr, Khalid (2012) Direct thrust force measurement of pulse detonation engine. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1257-1263. ISSN 0094-243X

Abdullah, Hasnain and Taib, Mohd. Nasir and Mohamed Noordin, Ida Rahayu and Saad, Norhidayah and Wan Ali, Wan Khairuddin and Ariffn, Rusnani and Abdullah, Ahmad Takiyuddin and A. Jalil, Siti Zura (2012) Computational design and performance evaluation of green painting absorbing material. Progress in Electromagnetics Research Symposium . pp. 963-967. ISSN 1559-9450

Abdullah, Mohamed Ruslan and Cantwell, Wesley J. (2012) The high-velocity impact response of thermoplastic-matrix fibre-metal laminates. Journal of Strain Analysis for Engineering Design, 47 (7). pp. 432-443. ISSN 0309-3247 (Print); 2041-3130 (Electronic)

Abu Bakar, Abdul Rahim and Zainudin, Muhammad Amir (2012) Preventing disc brake squeal using a thin plate shim. International Journal of Vehicle Structures and Systems, 4 (1). pp. 23-27. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Abu Bakar, Saiful Anuar and Masuda, Ryosuke and Hashimoto, Hiromu and Inaba, Takeshi and Jamaluddin, Hishamuddin and Abdul Rahman, Roslan and Mohd. Samin, Pakharuddin (2012) Active suspension system in improving ride and handling performance of electric vehicle conversion. International Journal of Electric and Hybrid Vehicles, 4 (1). pp. 24-53. ISSN 1751-4088

Abu Husain, Nurulakmar and Khodaparast, Hamed Haddad and Ouyang, Huajiang (2012) Parameter selection and stochastic model updating using perturbation methods with parameter weighting matrix assignment. Mechanical Systems And Signal Processing, 32 . pp. 135-152. ISSN 0888-3270

Adham, A. M. and Mohd Ghazali, Normah and Ahmad, Robiah (2012) Thermal performance of ammonia-cooled micro channel heat sink. International Review of Mechanical Engineering, 6 (4). pp. 828-836. ISSN 1970-8734

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Rabiah (2012) Optimization of an ammonia-cooled rectangular microchannel heat sink using multi-objective non-dominated sorting genetic algorithm (NSGA2). Heat and Mass Transfer, 58 (10). pp. 1723-1733. ISSN 0947-7411(Print); 1432-1181(Electronic)

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Robiah (2012) Cooling of a rectangular microchannel heat sink with ammonia gas. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 57-64. ISSN 0094-243X

Afrooz, Iman Eslami and Ochsner, Andreas and Rahmandoust, Moones (2012) Effects of the carbon nanotube distribution on the macroscopic stiffness. Computational Materials Science, 51 (1). pp. 422-429. ISSN 0927-0256

Ahmad, Zair Asrar and Gabbert, Ulrich (2012) Simulation of lamb wave reflections at plate edges using the semi-analytical finite element method. Ultrasonics, 52 (7). pp. 815-820. ISSN 0041-624X

Ahmed, H. E. and Ahmed, M. I. and Yusoff, M. Z. (2012) Heat transfer enhancement of laminar nanofluids flow in a triangular duct using vortex generator. Superlattices and Microstructures, 52 (3). pp. 398-415. ISSN 0749-6036

Ahmed, H. E. and Mohammed, Hussein A. and Yusoff, M. Z. (2012) An overview on heat transfer augmentation using vortex generators and nanofluids: approaches and applications. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5951-5993. ISSN 1364-0321

Ahmed, Yasser Mohamed and Jamail, Aizat and Yaakob, Omar (2012) Boat survey using photogrammetry method. International Review of Mechanical Engineering (IREME), 6 (7). pp. 1643-1647. ISSN 1970-8734

Al-Obaidi, Salah M. Ali and Leong, M. Salman and Hamzah, R.I.R and Abdelrhman, Ahmed Mohammed (2012) A review of acoustic emission technique for machinery condition monitoring: defects detection & diagnostic. Applied Mechanics and Materials, 229-23 . pp. 1476-1480. ISSN 1660-9336

Ali, M. A. H. and Mailah, Musa and Tang, Howe Hing (2012) Path planning of mobile robot for autonomous navigation of road roundabout intersection. International Journal of Mechanics, 6 (4). pp. 203-211. ISSN 1998-4448

Ali, Z. and Ubaidullah, D. and Zahid, M. N. and Osman, Kahar (2012) Optimization of stack emission parameters using gaussian plume model. Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 45-51. ISSN 0127-9696

Alias, T. Y. and Idris, Mohd. Hasbullah and Zuraida, Ahmad and Ourdjini, Ali (2012) Rheological behavior and stability of cassava starch for ceramic mould binder application. Advanced Materials Research, 576 . pp. 162-165. ISSN 1022-6680

Amiri, I. S. and Vahedi, G. R. and Shojaei, A. A. and Nikoukar, A. and Ali, Jalil and Yupapin, P. P. (2012) Secured transportation of quantum codes using integrated PANDA-add/drop and TDMA systems. International Journal of Engineering Research & Technology (IJERT), 1 (5). pp. 1-5. ISSN 2278-0181

Ammar, N. M. M. (2012) Particle movement in shear cavity flow for different stokes number using Lattice Boltzmann Method. AIP Conference Proceedings, 1440 (1). ISSN 0094-243X

Andwari, A. M. and Aziz, A. A. (2012) Homogenous charge compression ignition (HCCI) technique: a review for application in two-stroke gasoline engines. Applied Mechanics And Materials, 165 . pp. 53-57. ISSN 1662-7482

Ani, Farid Nasir and Salema, Arshad Adam (2012) Pyrolysis of oil palm empty fruit bunch biomass pellets using multimode microwave irradiation. Bioresource Technology, 125 . pp. 102-107. ISSN 0960-8524

Arsad, S.S and Noh, S. N. S. S. and Ayob, Amran and Ahmad, Zaini and Abdul Latif, Ainullotfi and Kamsah, Nazri and Tamin, Mohd. Nasir (2012) Deformation response of steel sheet metal under transverse impact loading. International Review of Mechanical Engineering, 6 (3). pp. 680-684. ISSN 1970-8734

Ashrafi, Sina Alizadeh and Sharif, Safian and Yahya, Mohd. Yazid and Davoudinejad, Ali (2012) Assessment of hole quality and thrust force when drilling CFRP/AL stack using carbide tools. Applied Mechanics and Materials, 234 . pp. 28-33. ISSN 1660-9336

Assadian, Mahtab and Idris, Mohd. Hasbullah and Mehraban, Saleh and Jafari, Sajjad and Abdul Kadir, Mohammed Rafiq (2012) Effect of HF concentration on corrosion resistance of biomedical implants. Advanced Materials Research, 463-46 . pp. 837-840. ISSN 1022-6680

Atabaki, M. Mazar and Idris, J. (2012) Partial transient liquid phase diffusion bonding of zircaloy-4 to stabilized austenitic stainless steel 321 using titanium interlayer. Journal Of Manufacturing Science And Engineering-Transactions Of The Asme, 134 (1). ISSN 1087-1357

Atabaki, M. Mazar and Idris, Jamaliah (2012) Low-temperature partial transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite to AZ91D using Al-based interlayer. Materials & Design, 34 . pp. 832-841. ISSN 0264-1275

Aziz, Amir and Mamat, Rizalman and Amin, Makeen and Wan Ali, Wan Khairuddin (2012) Effect of propellant composition to the temperature sensitivity of composite propellant. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Aziz, Amir and Wan Ali, Wan Khairuddin (2012) Effect of oxidizer-fuel mixture ratio to the pressure exponent of ammonium perchlorate based composite propellant. Applied Mechanics And Materials, 110-11 . pp. 1380-1386. ISSN 1660-9336

Aziz, Amir and Wan Khairuddin, W. A. (2012) A study of basic aluminized propellants characteristics. Applied Mechanics And Materials, 110-11 . pp. 1321-1327. ISSN 1660-9336

Bahri, Bahram and Shahbakhti, Mahdi and Abdul Aziz, Azhar and Muhamad Said, Mohd. Farid (2012) Misfire detection based on statistical analysis for an ethanol fueled HCCI engine. International Review of Mechanical Engineering, 6 (6). pp. 1276-1282. ISSN 1970-8734

Bakhsheshi Rad, Hamid Reza and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Farahany, Saeed and Fereidouni, Amir and Yahya, Mohd. Yazid (2012) Characterization and corrosion behavior of biodegradable Mg-Ca and Mg-Ca-Zn implant alloys. Applied Mechanics And Materials, 121-12 . pp. 568-572. ISSN 1660-9336

Bakhsheshi Rad, Hamid Reza and Monshi, Ahmad and Monajatizadeh, Hossain and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Jafari, Hassan (2012) Effect of multi-step tempering on retained austenite and mechanical properties of low alloy steel. Journal of Iron and Steel Research International, 18 (12). pp. 49-56. ISSN 1006-706X

Balaji, R. and Yaakob, Omar (2012) An analysis of shipboard waste heat availability for ballast water treatment. Journal of Marine Engineering And Technology, 11 (2). pp. 15-29. ISSN 2046-4177

Barbosa, A. Q. and Da Silva, L. F. M. and Ochsner, A. and Abenojar, J. and Real, J. C. Del (2012) Influence of the size and amount of cork particle on the impact toughness of a structural adhesive. The Journal of Adhesion, 88 . pp. 452-470. ISSN 0021-8464

Barzani, Mohsen Marani and Noordin, Mohd. Yusof and Farahany, Saaed and Ourdjini, Ali (2012) Effect of machining parameters on cutting force when turning untreated and sb-treated al-11%si-1.8%Cu alloys using PVD coated tools. Applied Mechanics and Materials, 234 . pp. 74-77. ISSN 1660-9336

Borhana, A. A. and Mohamad, A. T. and Abdul Latif, A. and Ahmad, Zaini and Ayob, A. and Tamin, Mohd. Nasir (2012) Ductile failure prediction of spot welded lap joint. Applied Mechanics and Materials, 165 . pp. 285-289. ISSN 1660-9336

Budianto, A. and Tawi, K. B. and Hussein, M. and Supriyo, B. and Ariyono, S. and Che Kob, M. S. and Zulkifli, Mohd. Ezlamy and Khairuldean, A. K. and Daraoh, Aishah (2012) Microcontroller based proportional derivative plus conditional integral controller for electro-mechanical dual acting pulley continuously variable transmission ratio control. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) Flashback of laminar premixed flame in rotating burner. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1292-1299. ISSN 0094-243X

Burhaumudin, Mohammad Safwan and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Sulaiman, Syabillah (2012) Integration of magic formula tire model with vehicle handling model. International Journal of Research in Engineering and Technology, 1 (3). pp. 139-145. ISSN 2277-4378

Che Sidek, Nor Azwadi and Abdul Munir, Fudhail (2012) Lattice Boltzmann numerical prediction of fluid flow in various shapes of shear driven cavity. International Review of Mechanical Engineering, 6 (3). pp. 565-573. ISSN 1970-8734

Che Sidik, Nor Azwadi and Abd. Munir, Fudhail and Mohd. Zin, Mohd. Rody and Salim, Mohd. Azli (2012) Accurate numerical prediction of incompressible fluid flow in lid-driven cavities. Applied Mechanics And Materials, 110-11 . pp. 4365-4372. ISSN 1660-9336

Che Sidik, Nor Azwadi and Abdul Munir, Fudhail (2012) Mesoscale numerical prediction of fluid flow in a shear driven cavity. Arabian Journal for Science and Engineering, 37 (6). pp. 1723-1735. ISSN 1319-8025

Che Sidik, Nor Azwadi and Attarzadeh, Seyed Mohammad Reza and Haghbin, F. (2012) Cubic-interpolated-pseudo-particle method to predict dynamic behaviour of fluid in shear driven cavity. Applied Mechanics And Materials, 110-11 . pp. 377-384. ISSN 1660-9336

Che Sidik, Nor Azwadi and Goh, C. K. and Muhammad Yazid, Muhammad Noor Afiq Witri (2012) Computational analysis of heat flow in computer casing. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 199-208. ISSN 0094-243X

Che Sidik, Nor Azwadi and Izual, N. I. N. (2012) Numerical investigation of fluid and thermal flow in a differentially heated side enclosure walls at various inclination angles. CMES - Computer Modeling in Engineering and Sciences, 84 (6). pp. 559-574. ISSN 1526-1492 (Print); 1526-1506 (Electronic)

Che Sidik, Nor Azwadi and Jahanshaloo, Leila (2012) Lattice Boltzmann numerical scheme for transient hydrodynamics of solid particles in an enclosure. CFD Letters, 4 (3). ISSN 2180-1363

Che Sidik, Nor Azwadi and Masoud, Godarzi (2012) Solution to natural convection heat transfer by two different approaches: navier stokes and lattice Boltzmann. International Review of Mechanical Engineering, 6 (4). pp. 705-711. ISSN 1970-8734

Che Sidik, Nor Azwadi and Mat Sahat, Idris (2012) Finite difference and cubic interpolated profile lattice boltzmann method for prediction of two-dimensional lid-driven shallow cavity flow. Arabian Journal for Science and Engineering, 37 (4). pp. 1101-1110. ISSN 1319-8025 (Print); 2191-4281 (Electronics)

Che Sidik, Nor Azwadi and Mohd. Azmi, Mohd. Irwan (2012) Numerical prediction of natural convection heat transfer through porous media by the Lattice Boltzmann Method. Applied Mechanics And Materials, 110-11 . pp. 4439-4444. ISSN 1660-9336

Che Sidik, Nor Azwadi and Safdari, Arman (2012) Comments on 'Lattice Boltzmann simulation of alumina-water nanofluid in a square cavity'. Nanoscale Research Letters, 7 (648). ISSN 1931-7573

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Numerical prediction of mixed convection heat transfer in an enclosure. International Review on Modelling and Simulations, 5 (3). pp. 1339-1343. ISSN 1974-9821

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Numerical simulation of flow over semicircular cavity. International Review on Modelling and Simulations, 5 (3). pp. 1335-1338. ISSN 1974-9821

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Prediction of flow characteristics in stenotic artery using CIP scheme. International Journal of Mechanical and Material Engineering, 7 (1). pp. 101-106. ISSN 1823-0334

Che Sidik, Nor Azwadi and Salehi, Mehran and Muhammad Yazid, Muhammad Noor Afiq Witri (2012) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 650-658. ISSN 0094-243X

Cheng, Tung Chong and Sochgreb, Simone (2012) Spray combustion characteristic of palm biodesiel. Combustion Science and Technology, 184 (7-8). ISSN 0012-2202

Chiong, Meng Soon and Rajoo, Srithar and Ricardo, Martinez-Botas and Costall, Aaron (2012) Engine turbocharger performance prediction: one-dimensional modeling of a twin entry turbine. Energy Conversion And Management, 57 . pp. 68-78. ISSN 0196-8904

Christopher, D. Santosh and Kanna, P. Rajesh and Madhusudhan, G. R. and Venkumar, P. and Mohammed, H. A. (2012) Numerical investigation of heat transfer from a two-dimensional sudden expansion flow using nanofluids. Numerical Heat Transfer; Part A: Applications, 61 (7). pp. 527-546. ISSN 1040-7782

Cupu, Dedi Rosa Putra and Md. Sheriff, Jamaluddin and Osman, Kahar (2012) Bio-based lubricants for numerical solution of elastohydrodynamic lubrication. Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 39-44. ISSN 0127-9696

Da Silva, Lucas F. M. and Ochsner, Andreas and Adams, Robert D. (2012) Guest Editorial. Journal of Adhesion, 88 (4-6). pp. 277-281. ISSN 0021-8464 (Print); 1545-5823 (Electronics)

Da Silva, Lucas F. M. and Ochsner, Andreas and Adams, Robert D. (2012) Guest Editorial. International Journal of Adhesion and Adhesives, 37 . pp. 1-2. ISSN 0143-7496

Da Silva, Lucas F. M. and Öchsner, Andreas and Adams, Robert D. (2012) Special issue: special issue on joint design 3. International Journal of Adhesion and Adhesives, 37 . pp. 1-2. ISSN 0143-7496

Dahalan, Md. Nizam and Mansor, Shuhaimi and Ali, Airi (2012) Cavity effect of synthetic jet actuators based on piezoelectric diaphragm. Applied Mechanics and Materials, 225 . pp. 85-90. ISSN 1660-9336

Dahalan, Md. Nizam and Mansor, Shuhaimi and Shaharudin, Muhammad Haniff and Ali, Airi (2012) Evaluation of synthetic jet actuators design performance. Aircraft Engineering and Aerospace Technology, 86 (4). 390 -397. ISSN 0002-2667

Daroonparvar, Mohammadreza and Hussain, Mohammad Sakhawat and Mat Yajid, Muhammad Azizi (2012) The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air. Applied Surface Science, 261 . pp. 287-297. ISSN 0169-4332

Daud, Mohd. Fadzil and Mohd. Taib, Jamaluddin and Shariffudin, Rio Sumarni (2012) Assessing mechanical engineering undergraduates’ conceptual knowledge in three dimensional computer aided design (3D CAD). Procedia - Social and Behavioral Sciences, 56 . pp. 1-11. ISSN 1877-0428

Davoudinejad, Ali and Ashrafi, Sina Alizadeh and Raja Hamzah, Raja Ishak and Niazi, Abdolkarim (2012) Experimental analysis of wear mechanism and tool life in dry drilling of AL2024. Advanced Materials Research, 566 . pp. 217-221. ISSN 1022-6680

Dehkordi, S. M. Hashemi and Abu Bakar, A. R. and Mailah, M. (2012) Reducing friction-induced vibration using intelligent active force control with piezoelectric actuators. Sadhana, 37 (6). pp. 637-655. ISSN 0256-2499

Deirram, Nayeleh and Rahmat, Abdul Razak and Rashidi, Saba and Ghanbari1, Taravat and Moradpour, Mona (2012) Hydrolysis degradation of polycarbonate under microwave irradiation by using design of experiment software. Scientific Research and Essays, 7 (40). pp. 3399-3405. ISSN 1992-2248

El-Fawal, M. H. and Mohd. Ghazali, Normah (2012) Optimized heat exchanger unit in a thermoacoustic refrigerator. AIP Conference Proceedings, 1440 . pp. 1300-1308. ISSN 0094-243X

Em, Poh Ping and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2012) Hardware-in-the-loop simulation of automatic steering control for double lane change and sine steer manoeuvres. International Journal of Vehicle Autonomous Systems, 10 (1-2). pp. 67-104. ISSN 1471-0226 (Print); 1741-5306 (Electronics)

Fadil, Nor Akmal and Govindachetty, Saravanan and Yoshikawa, Hideki and Yamashita, Yoshiyuki and Ueda, Shigenori and Kobayashi, Keisuke and Tanabe, Toyokazu and Hara, Toru and Gubbala, Venkata Ramesh and Murakami, Hideyuki and Noda, Kazuhiko and Abe, Hideki (2012) Wet chemical synthesis of ni-al nanoparticles at ambient condition. Advanced Materials Research, 557-59 . pp. 442-447. ISSN 1022-6680

Farahany, S. and Ourdjini, Ali and Idris, Mohd. Hasbullah (2012) The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al-Si alloys. Journal of Thermal Analysis and Calorimetry, 109 (1). pp. 105-111. ISSN 1388-6150 (Print); 1572-8943 (Electronic)

Farahany, Saeed and Bakhsheshi-Rad, Hamid Reza and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Lotfabadi, Amir Fereidouni and Ourdjini, Ali (2012) In-situ thermal analysis and macroscopical characterization of mg-xca and mg-0.5Ca-xzn alloy systems. Thermochimica Acta, 527 . pp. 180-189. ISSN 0040-6031

Fiedler, Thomas and Belova, Irina V. and Ochsne, Andreas and Murch, Graeme (2012) A lattice Monte Carlo analysis on chemical reaction with moving boundary. Computational Thermal Sciences, 4 (2). pp. 131-135. ISSN 1940-2503

Fiedler, Thomas and Veyhl, Christoph and Belova, Irina Veniaminovna and Tane, Masakazu and Nakajima, Hideo and Bernthaler, Timo and Merkel, Markus and Öchsner, Andreas and Murch, Graeme Elliott (2012) On the anisotropy of lotus-type porous copper. Advanced Engineering Materials, 14 (3). pp. 144-152. ISSN 1438-1656

Firouzabadi, F. and Ayob, Amran and Teshnizi, S. Sharifi and Sharifishourabi, G. (2012) Mechanical response of laminated composite cylindrical shell subjected to radial patch loading. Applied Mechanics and Materials, 229-23 . pp. 292-296. ISSN 1660-9336

Firouzabadi, Farzin and Ayob, Amran and Moradpour, Mahdi and Heidarpour, R. and Deirram, Nayeleh (2012) Dynamic response of laminated composite cylindrical shell subjected to pure impact. Applied Mechanics and Materials, 229-23 . pp. 2577-2581. ISSN 1660-9336

Ghadimi, Pezhman and Azadnia, Amir Hossein and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2012) A weighted fuzzy approach for product sustainability assessment: a case study in automotive industry. Journal of Cleaner Production, 33 . pp. 1-21. ISSN 0959-6526

Ghavamian, Ali and Ochsner, Andreas (2012) Numerical investigation on the influence of defects on the buckling behavior of single-and multi-walled carbon nanotubes. Physica E: Low-Dimensional Systems and Nanostructures, 46 . pp. 241-249. ISSN 1386-9477

Ghavamian, Ali and Rahmandoust, Moones and Öchsner, Andreas (2012) A numerical evaluation of the influence of defects on the elastic modulus of single and multi-walled carbon nanotubes. Computational Materials Science, 62 . ISSN 0927-0256

Ghosh, Debasish and Ghosh, Pradip and Yusop, Mohd. Zamri and Tanemura, Masaki and Hayashi, Yasuhiko and Tsuchiya, Tetsuo and Nakajima, Tomohiko (2012) Transparent and flexible field emission display device based on single-walled carbon nanotubes. Physica Status Solidi-Rapid Research Letters, 6 (7). pp. 303-305. ISSN 1862-6254

Gohari, Mohammad and Abd. Rahman, Roslan and Raja, Raja Ishak and Tahmasebi, Mona (2012) A novel artificial neural network biodynamic model for prediction seated human body head acceleration in vertical direction. Journal of Low Frequency Noise Vibration and Active Control, 31 (3). pp. 205-216. ISSN 0263-0923

Golshan, Abolfazl and Gohari, Soheil and Amran, Ayob (2012) Modeling and optimization of wire electrical discharge machining of cold-work steal 2601. Advanced Materials Research, 383-39 . pp. 6695-6703. ISSN 1022-6680

Golshan, Abolfazl and Gohari, Soheil and Ayob, Amran (2012) Multi-objective optimisation of electrical discharge machining of metal matrix composite Al/SiC using non-dominated sorting genetic algorithm. International Journal of Mechatronics and Manufacturing Systems, 5 (5-6). pp. 385-398. ISSN 1753-1039

H., Azmi and C. S., Nor Azwadi (2012) Numerical analysis of natural convection in porous media using constrained interpolated profile method. AIP Conference Proceedings, 1440 (1). pp. 716-731. ISSN 0094-243X

H. Sait, Hani and Hussain, Ahmad and Adam Salema, Arshad and Ani, Farid Nasir (2012) Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis. Bioresource Technology, 118 . pp. 382-389. ISSN 0960-8524

Habidin, N. F. and Yusof, S. M. (2012) Relationship between lean six sigma, environmental management systems, and organizational performance in the malaysian automotive industry. International Journal of Automotive Technology, 13 (7). pp. 1119-1125. ISSN 1229-9138

Hadzri, Edi Azali and Shamsudin, Amir Hamzah and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Abd. Aziz, Azian (2012) Effects of irregular cerebrospinal fluid production rate in human brain ventricular system. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 659-664. ISSN 0094-243X

Abd. Hamid, Mohd. Kamaruddin and Stachowiak, Gwidon and Samion, Syahrullail (2012) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 905-913. ISSN 0094-243X

Hamzah, Esah and Yong, T. M. (2012) Effect of surface pretreatment on nanocrystalline diamond ballas morphology. Jurnal Teknologi (Sciences and Engineering), 59 (SUP. 3). pp. 65-69. ISSN 0127-9696

Hasan, Mohd. Faizal and Kuwabara, Masato and Kizu, Ryo and Yokomori, Takeshi and Ueda, Toshihisa (2012) Experimental study on a compact methanol steam reformer with Pd/Ag membrane. Journal of Thermal Science and Technology, 7 (1). pp. 135-150. ISSN 1880-5566

Hassan, Mohd. Fahrul and Mat Saman, Muhamad Zameri and Sharif, Safian and Omar, Badrul (2012) Integration of morphological analysis theory and artificial neural network approach for sustainable product design: a case study of portable vacuum cleaner. International Journal of Sustainable Manufacturing, 2 (4). pp. 293-316. ISSN 1742-7223

Hee, Lim Meng and Leong, M. S. (2012) Experimental study of dynamic responses of casing deflection profile for blade rubbing classification. Journal of Vibroengineering, 14 (4). pp. 1668-1680. ISSN 1392-8716

Heidari, Milad and Abdul Kadir, Mohammed Rafiq and Fallahiarezoodar, Ali and Harun, Muhamad Noor and Alizadeh, Mina and Kashani, Jamal (2012) Biomechanical assessment of unconstrained elbow prosthesis after total elbow replacement: a finite element analysis. Applied Mechanics and Materials, 234 . pp. 1-10. ISSN 1660-9336

Hosseini, S. A. Abbasian and Nikakhtar, A. and Wong, K. Y. and Zavichi, A. (2012) Implementing lean construction theory into construction processes' waste management. ICSDC 2011: Integrating Sustainability Practices In The Construction Industry - Proceedings Of The International Conference On Sustainable Design And Construction 2011 . pp. 414-420.

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2012) Necessity of biodiesel utilization as a source of renewable energy in Malaysia. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5732-5740. ISSN 1364-0321

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan and Ali Abuelnuor, Abuelnuor Abdeen (2012) High temperature air combustion: sustainable technology to low NOx formation. International Review of Mechanical Engineering, 6 (5). pp. 947-953. ISSN 1970-8734

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan and Ali Abuelnuor, Abuelnuor Abdeen (2012) Pollutant reduction and energy saving in industrial sectors by applying high temperature air combustion method. International Review of Mechanical Engineering, 6 (7). pp. 1667-1672. ISSN 1970-8734

Hosseini, Seyed Ehsan and Salehirad, Saber and Wahid, M. A. and Mohd. Sies, Mohsin and Saat, Aminuddin (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1309-1312. ISSN 0094-243X

Hosseini, Seyed Mohd. Hossien and Kharaghani, Abdolreza and Kirsch, Christoph and Ochsner, Andreas (2012) Temperature dependence of elastic properties of aluminium foam structures. Defect and Diffusion Forum, 326-32 . pp. 233-237. ISSN 1012-0386

Hosseini, Seyed Mohd. Hossien and Merkel, Markus and Ochsner, Andreas (2012) Influence of the joint shape on the uniaxial mechanical properties of non-homogeneous bonded perforated hollow sphere structures. Computational Materials Science, 58 . pp. 183-187. ISSN 0927-0256

Hussain, M. S. (2012) Direct NI-CO alloy plating of titanium alloy surfaces by high speed electrodeposition. Transactions Of The Institute Of Metal Finishing, 90 (1). pp. 15-19. ISSN 0020-2967

Hussein, A. K. and Ahmed, S. E. and Saha, S. and Hasanpour, A. and Hussein, Mohammed and Kolsi, L. and Adegun, I. (2012) MHD natural convection inside an inclined trapezoidal porous enclosure with internal heat generation or absorption subjected to isoflux heating. Heat Transfer - Asian Research, 41 (6). pp. 498-515. ISSN 1099-2871

I. Kassem, Hassan and M. Saqr, Khalid and Mohd. Sies, Mohsin and Abdul Wahid, Mazlan (2012) Integrating a simplified P-N radiation model with edmfoam1.5: model assessment and validation. International Communications in Heat and Mass Transfer, 39 (5). pp. 697-704. ISSN 0735-1933

Idris, Mohd. Hanafi and Jafari, Hassan and Harandi, Shervin Eslami and Mirshahi, Milad and Koleyni, S. (2012) Characteristics of as-cast and forged biodegradable Mg-Ca binary alloy immersed in Kokubo simulated body fluid. Advanced Materials Research, 445 . pp. 301-306. ISSN 1022-6680

Idris, Roslinda and Prawoto, Yunan (2012) Influence of ferrite fraction within martensite matrix on fatigue crack propagation: an experimental verification with dual phase steel. Materials Science and Engineering A, 552 . pp. 547-554. ISSN 0921-5093

Idris, Siti Rabiatull Aisha and Ourdjini, Ali (2012) Effect of multiple reflow on IMC formation using various surface finishes. International Journal of Microstructure and Materials Properties, 7 (6). pp. 502-516. ISSN 1741-8410

Ishak, M. S. A. and Jaafar, M. N. M. and Arizal, M. A. A. and Abu Kasim, M. A. (2012) Feasibility study of using jatropha (jatropha curcas) oil as bio-diesel on an oil firing burner system. International Review of Mechanical Engineering, 6 (6). pp. 1302-1306. ISSN 1970-8734

Ishak, M. S. A. and Jaafar, M. N. M. and Sapee, Syazwana and Norwazan, A. R. and Arizal, M. A. A. (2012) Numerical and experimental study on droplet size of kerosene fuel. International Review of Mechanical Engineering, 6 (7). pp. 1593-1600. ISSN 1970-8734

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri and Shafie, N. E. A and Ramli, Yahaya (2012) Design of palm envo-diesel gas turbine combustion test rig. International Review of Mechanical Engineering, 6 (7). pp. 1673-1680. ISSN 1970-8734

Ismail, Kamariah and Leow, Y. R. and Yong, C. Y. and Abdul Majid, I. and Thwala, W. D. and Ajagbe, M. A. (2012) Critical success factors of new product development in technology based firms: a case study. African Journal of Business Management, 6 (33). pp. 9442-9451. ISSN 1993-8233

Izman, Izman and Shayganpour, Amirreza and Idris, Mohd. Hanafi (2012) Effect of casting parameters on porosity in LFC. Applied Mechanics And Materials, 148-14 . pp. 1198-1201. ISSN 1660-9336

Izman, Sudin and Ghodsiyeh, Danial and Hamed, T. and R. Rosliza, R. Rosliza and Rezazadeh, Mohammadali (2012) Effects of adding multiwalled carbon nanotube into dielectric when edming titanium alloy. Advanced Materials Research, 463-46 . pp. 1445-1449. ISSN 1022-6680

Izman, Sudin and Hassan, M. A. and Abdul Kadir, Mohammed Rafiq and Abdullah, M. R. and Anwar, Mahmood and Shah, A. and Daud, Rosdi (2012) Effect of pretreatment process on thermal oxidation of biomedical grade cobalt based alloy. Advanced Materials Research, 399-40 . pp. 1564-1567. ISSN 1022-6680

Izman, Sudin and Shah, A. and Abdul Kadir, Mohammed Rafiq and Engku Abu Bakar, Engku Mohammad Nazim and Anwar, Mahmood and Hassan, Mas Ayu and Safari, Habib (2012) Effect of thermal oxidation temperature on rutile structure formation of biomedical TIZRNB alloy. Advanced Materials Research, 393-39 . pp. 704-708. ISSN 1022-6680

Jaafar, M. N. M. and Permatasari, Rosyida and Mohd. Sobree, Mohd. Nazar Yakin (2012) Pengurangan pelepasan emisi dari pembakar lapisan terbendalir menggunakan tempurung kelapa sawit sebagai bahan api. Jurnal Teknologi (Sciences and Engineering), 59 . pp. 1-11. ISSN 0127-9696

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Abdul Kadir, Mohammed Rafiq (2012) Characterization of AZ91D granules covered with a flux during in-situ melting. Particle & Particle Systems Characterization, 29 (4). pp. 263-272. ISSN 0934-0866

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Farahany, Saeed (2012) In-situ melting assessment of AZ91D granules by thermal analysis. Advanced Science Letters, 14 (1). pp. 295-298. ISSN 1936-6612

Jafari, Hossein and Sadeghi, Rasoul and Idris, Mohd. Hasbullah and Ourdjini, Ali (2012) Effect of flux composition on mould-magnesium reaction during in-situ melting. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 480-485. ISSN 0094-243X

Jafari, Sajjad and Taheri, Mohammad Mahdi and Idris, Jamaliah (2012) Bioactive coating on stainless steel 316L through sol-gel method. Advanced Materials Research, 383-39 . pp. 3944-3948. ISSN 1022-6680

Jamei, S. and Maimun, Adi and Mansor, Shuhaimi and Che Sidik, Nor Azwadi and Priyanto, Agoes (2012) Numerical investigation on aerodynamic characteristics of a compound wing-in-ground effect. Journal of Aircraft, 49 (5). pp. 1297-1305. ISSN 0021-8669

Jamei, Saeed and Che Sidik, Nor Azwadi and A. Malek, A. M. and Mansor, Shuhaimi and Priyanto, Agoes (2012) Aerodynamic characteristics of rectangular-wing with reverse taper wing and anhedral angle in ground effect. International Review of Mechanical Engineering, 6 (7). pp. 1521-1528. ISSN 1970-8734

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Selamat, Ali and Priyanto, Agoes and Zamani, Zamani and Pauzi, Pauzi and Djuansjah, J. R. P. (2012) Integrated ship maneuverability simulation tool for very large crude oil carrier. International Journal of Digital Content Technology and its Applications, 6 (13). pp. 542-548. ISSN 1975-9339

Johari, Nasrul Hadi and Mhd. Nor, Wan Mohd Basri and Osman, Kahar and Mohd. Salleh, Zuliazura and Helmi, Mohd. Haris and Abdul Kadir, Mohammed Rafiq (2012) Effect of tracheal stenosis at different locations on airflow in the trachea and main bronchi. AIP Conference Proceedings, 1440 . pp. 1325-1332. ISSN 0094-243X

Jong, Rudiyanto Philman and Osman,, Kahar and Mohd. Adib, Mohd. Azrul Hisham and Hisham, M. (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 604-611. ISSN 0094-243X

Kamitani, Shunpei and Nakanishi, Kenji and Matsushita, Takafumi and Syahrullail, Samion (2012) Measurement of coefficient of friction under bulk plastic deformation by using plane strain extrusion apparatus with plane plate tool and taper die. Tribology online, 7 (4). pp. 249-257. ISSN 1881-2198

Kamsah, Nazri and Tamin, Mohd. Nasir and Kamar, Haslinda Mohamed and Lahuri, Hidayatunnur and Wagiman, Amir Nur Rashid (2012) Development of vapor pressure in fr4-copper composite material during solder reflow process. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 116-123. ISSN 0094-243X

Karimian, Majid and Ourdjini, Ali and Idris, Mohd. Hasbullah and Jafari, Hassan (2012) Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu Alloy casting. Transactions of Nonferrous Metals Society of China (English Edition), 22 (9). pp. 2092-2097. ISSN 1003-6326

Kaviri, Abdolsaeid Ganjeh and Mohd.Jaafar, Mohammad Nazri and Mat Lazim, Tholudin (2012) Modeling and multi-objective exergy based optimization of a combined cycle power plant using a genetic algorithm. Energy Conversion And Management, 58 . pp. 94-103. ISSN 0196-8904

Kherbeet, A. Sh. and Mohammed, Hussein A. and Salman, B. H. (2012) The effect of nanofluids flow on mixed convection heat transfer over microscale backward-facing step. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5870-5881. ISSN 0017-9310

Kianpour, E. and Che Sidik, Nor Azwadi and Seyyed, Mohsen Agha and Bozorg, Mirza (2012) Dynamic analysis of flow field at the end of combustor simulator. Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 1-12. ISSN 0127-9696

Kidam, Kamarizan and Hurme, Markku (2012) Method for identifying contributors to chemical process accidents. Process Safety and Environmental Protection . ISSN 0957-5820

Koh, Kho King and Yasukawa, Hironori (2012) Comparison study of a Pusherbarge system in shallow water, medium shallow water and deep water conditions. Ocean Engineering, 46 . pp. 1-17. ISSN 0029-8018

Kok, F. S. and Muhamad, Ida Idayu and Lee, Chew Tin and Razali, Firdausi and Pa’e, N. and Salleh, Shaharuddin (2012) Effects of pH and temperature on the growth and ß-glucosidase activity of lactobacillus rhamnosus NRRL 442 in anaerobic fermentation. International Review of Chemical Engineering, 4 (3). pp. 293-299. ISSN 2035-1755

Koloor, S. S. R. and Hussin, H. and Tamin, M. N. (2012) Mode i interlaminar fracture characterization of CFRP composite laminates. Advanced Materials Research, 488-48 . pp. 552-556. ISSN 1022-6680

Komarudin, Komarudin and Wong, Kuan Yew (2012) Parameter tuning of ant system using fuzzy logic controller. International Journal Of Operational Research, 15 (2). pp. 125-135. ISSN 1745-7645

Koto, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, Agoes and Abd. Kader, Ab. Saman and Ahmad, Mohd. Zamani and Ghani, Pauzi and Zamani, Zamani and Saman, Saman (2012) Effect of stern hull shape on turning circle of ships. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1191-1196. ISSN 0094-243X

Koto, Jaswar and Abdul Malik, Adi Maimun and Priyanto, Agoes and Abdul Wahid, Mazlan and Ahmad, Mohd. Zamani and Abdul Ghani, Mohamad Pauzi (2012) An integrated CFD simulation tool in naval architecture and offshore (NAO) engineering. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1175-1181. ISSN 0094-243X

Kuah, Chuen Tse and Wong, Kuan Yew and Wong, Wai Peng (2012) Monte Carlo data envelopment analysis with genetic algorithm for knowledge management performance measurement. Expert Systems With Applications, 39 (10). pp. 9348-9358. ISSN 0957-4174

Kurdi, Ojo and Abd. Rahman, Roslan and Tamin, Nasir (2012) Finite element analysis of corroded truck chassis using sub modeling technique. Applied Mechanics And Materials, 110-11 . pp. 2411-2415. ISSN 1660-9336

Leong, Mohd. Salman and Lim, Meng Hee and Guai, Yeu Kae (2012) Turbine generator synchronization - two case studies. Sound and Vibration, 46 (5). pp. 8-11. ISSN 1541-0161

Lim, Xin Yi and Ani, Farid Nasir (2012) The spray combustion of palm olein and diesel fuel blends. Jurnal Mekanikal (34). pp. 47-56. ISSN 0127-3396

Loghmanian, Sayed Mohammad Reza and Jamaluddin, Hishamuddin and Ahmad, Robiah and Yusof, Rubiyah and Khalid, Marzuki (2012) Structure optimization of neural network for dynamic system modeling using multi-objective genetic algorithm. Neural Computing & Applications, 21 (6). pp. 1281-1295. ISSN 0941-0643 (Print); 1433-3058 (Electronic)

M. Nor, Fethma and Kurniawan, Denni and Young, Kwon Seo and Jung, Keug Park and Ho, Yong Lee and Joong, Yeon Lim (2012) Polycaprolactone-starch blends with corn-based coupling agent: physical properties and in vitro analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (9). pp. 693-698. ISSN 0954-4119 (Print); 2041-3033 (Electronic)

Ma, G. and Zhong, L. and Zhang, X. and Ma, Q. and Kang, S. H. (2012) Mechanism of mooring line breakage of floating offshore wind turbine under extreme coherent gust with direction change condition. Journal of Marine Science and Technology (Japan), 25 (4). pp. 1283-1295. ISSN 0948-4280

Ma'aram, A. and Tran, Trung Kien Le (2012) Safety inventory under a periodic review system. Advanced Materials Research, 591-59 . pp. 545-552. ISSN 1022-6680

Mailah, Musa and Hooi, H. M. and Kazi, Suhail and Jahanabadi, Hossein (2012) Practical active force control with iterative learning scheme applied to a pneumatic artificial muscle actuated robotic arm. International Journal Of Mechanics, 6 (1). pp. 88-96. ISSN 1998-4448

Mansoorzadeh, Shiva and Mohd. Yusof, Sha'ri and Zeynal, Hossein and Mansoorzadeh, Shahriar (2012) A risk-based project schedule estimation method to improve project reliability. Advanced Science Letters, 13 (1). pp. 813-816. ISSN 1936-6612

Mansouri, Mohammad Tajik and Ahmadi, Pouria and Kaviri, Abdolsaeid Ganjeh and Mohd. Jaafar, Mohammad Nazri (2012) Exergetic and economic evaluation of the effect of HRSG configurations on the performance of combined cycle power plants. Energy Conversion And Management, 58 . pp. 47-58. ISSN 0196-8904

Marwah, Omar Mohd. Faizan and Sharif, Safian and Ibrahim, Mustaffa (2012) Direct fabrication of IC sacrificial patterns via rapid prototyping approaches. International Journal of Automation Technology, 6 (5). pp. 570-575. ISSN 1881-7629

Masood, Ibrahim and Hassan, Adnan (2012) An integrated MEWMA-ANN scheme towards balanced monitoring and accurate diagnosis of bivariate process mean shifts. Journal of king Saud University - Computer and Information Sciences, 24 (2). pp. 93-100. ISSN 1319-1578

Masood, Ibrahim and Hassan, Adnan (2012) Pattern recognition for bivariate process mean shifts using feature-based artificial neural network. International Journal of Advanced Manufacturing Technology, 66 (9-12). pp. 1201-1218. ISSN 0268-3768

Mat Darus, Intan Zaurah and Al-Khafaji, Ali A.M. (2012) Non-parametric modelling of a rectangular flexible plate structure. Engineering Applications of Artificial Intelligence, 25 (1). pp. 94-106. ISSN 0952-1976

Mat Lazim, Ahmad Razimi and Abdul Hamid, Mohd. Kameil and Abu Bakar, Abd. Rahim (2012) Effect of pad surface topography on disc brake squeal. Applied Mechanics and Materials, 165 . pp. 58-62. ISSN 1660-9336

Mat Lazim, Ahmad Razimi and Abdul Hamid, Mohd. Kameil and Abu Bakar, Abd. Rahim (2012) Effects of pad surface topography on disc brake squeal. Applied Mechanics And Materials, 165 . pp. 58-62.

Mat Sahat, Idris and Che Sidik, Nor Azwadi and Nik Mutasim, Muhammad Ammar (2012) Cubic interpolation profile Navier-Stokes numerical scheme for particle flow behaviour in triangular lid driven cavity. AIP Conference Proceedings, 1440 . pp. 209-215. ISSN 0094-243X

Mat Saman, Muhamad Zameri and Blount, Gordon and Zakuan, Norhayati (2012) Design for end-of-life value framework for vehicle design and development process. Journal of Sustainable Development, 5 (3). pp. 95-111. ISSN 1913-9071 (Electronic); 1913-9063 (Print)

Mat Tokit, E. and Mohammed, Hussein A. and Yusoff, M. Z. (2012) Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids. International Communications in Heat and Mass Transfer, 39 (10). pp. 1595-1604. ISSN 0735-1933

Md. Noor Rudin, Noor Fawazi and Jung, Youn Lee and Jae, Eung Oh (2012) A load-displacement prediction for a bended slotted disc using the energy method. Proceedings Of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 226 (8). pp. 2126-2137. ISSN 0954-4062

Miguel, Antonio Ferreira and Ochsner, Andreas (2012) This Special Issue presents a set of papers presented to the special session "design generation and evolution of flow systems" of the 7-th International Conference on Diffusion in Solids and Liquids - DSL2011. International Journal of Fluid Mechanics Research, 39 (2). pp. 99-100. ISSN 1064-2277 (Print); 2152-5102 (Electronic)

Mohamed Kamar, Haslinda and Kamsah, Nazri and Md. Tap, Masine and Mohd. Salimin, Khairul Amry (2012) Assessment of thermal comfort in a naturally ventilated residential terrace house. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 247-254. ISSN 0094-243X

Mohamed Kamar, Haslinda and Senawi, Mohd. Yusoff and Kamsah, Nazri (2012) Computerized simulation of automotive air-conditioning system: development of mathematical model and its validation. IJCSI - International Journal of Computer Science Issues, 9 (2). pp. 23-34. ISSN 1694-0784 (Print) ; 1694-0814 (Electronic)

Mohammadi, Maryam and Md. Tap, Masine (2012) A mixed integer programming model formulation for solving the lot-sizing problem. Internation Journal of Computer Science Issues, 9 (2(1)). pp. 1694-1703. ISSN 1694-0784

Mohammed, Hussein A. and Al-Aswadi, A. A. and Yusoff, M. Z. and Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643 (Print); 1531-8699 (Electronic)

Mohammed, Hussein A. and Narrein, K. (2012) Thermal and hydraulic characteristics of nanofluid flow in a helically coiled tube heat exchanger. International Communications in Heat and Mass Transfer, 39 (9). pp. 1375-1383. ISSN 0735-1933

Mohd Ayub Sulong (2012) Finite element simulation of the macroscopic heat conductivity of syntactic perford performed hollow sphere. Materialwissenschaft und Werkstofftechnik, 43 (5). pp. 461-467. ISSN 0933-5137

Mohd. Adib, Mohd. Azrul Hisham and Mohd. Hasni, Nur Hazreen and Osman, Kahar and Maskon, Oteh (2012) Analysis on rigidity of mitral valve leaflet (MVL) and backflow problems during cardiac cycle. Journal of Biomimetics, Biomaterials, and Tissue Engineering, 13 (1). pp. 75-79. ISSN 1662-1018

Mohd. Azmi, Mohd. Irwan and Che Sidik, Nor Azwadi and Abd. Munir, Fudhail and Misha, Suhaimi and Md. Daud, Nazri and Razali, Nadlene and Mat Sahat, Idris (2012) Free convection in square cavity driven by discrete three source-sink pairs on one sidewall. AIP Conference Proceedings, 1440 . pp. 242-246. ISSN 0094-243X

Mohd. Jaafar, Mohammad Nazri and Eldrainy, Yehia A. and Mat Ali, Muhammad Faiser and Wan Omar, W. Z. and Mohd. Hizam, Mohd. Faizi Arif (2012) Combustion performance evaluation of air staging of palm oil blends. Environmental Science & Technology, 46 (4). pp. 2445-2450. ISSN 0013-936X

Mohd. Norddin, Khairul Hafiz Norddin and Mat Saman, Muhamad Zameri (2012) Implementation of total productive maintenance concept in a fertilizer process plant. Jurnal Mekanikal (34). pp. 66-82. ISSN 0127-3396

Mohd. Rashidi, M. and Mohd. Hasbullah, I. (2012) A study on conversion of higher sulfur pig iron to ductile iron using in-mold treatment technique. International Review Of Mechanical Engineering, 6 (4). pp. 896-900.

Mohd. Yusof, Noordin and Aluwi Shakir, Noor Adila and Sudin, Izman and Kurniawan, Denni (2012) Acid pretreatment of WC-Co prior to CVD diamond coating. Advanced Materials Research, 576 . pp. 626-629. ISSN 1022-6680

Mokhtar, Nur Hazwani and Yaakob, M. S. and Osman, K. and Abdul Kadir, Mohammed Rafiq and W. Abdullah, W. K. and Haron, J. (2012) Flow modeling of actual human nasal cavity for various breathing conditions. AIP Conference Proceedings, 1440 . pp. 692-699. ISSN 0094-243X

Motasemi, F. and Ani, Farid Nasir (2012) A review on microwave-assisted production of biodiesel. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4719-4733. ISSN 1364-0321

Mozafari, Hamid and Abdi, Behzad and Amran, Ayob (2012) Optimization of temperature-dependent functionally graded material based on colonial competitive algorithm. Applied Mechanics And Materials, 121-12 . pp. 4575-4580. ISSN 1660-9336

Mozafari, Hamid and Abdi, Behzad and Amran, Ayob and Alias, Amran (2012) Optimum critical buckling of functional graded plates under non-linear temperature by using imperialist competitive algorithm. Applied Mechanics And Materials, 110-11 . pp. 3429-3433. ISSN 1660-9336

Mozafari, Hamid and Abdi, Behzad and Ayob, Amran (2012) Optimal design of non-monotonic heat-conducting thin adhesive layer based on imperialist competitive algorithm. Applied Mechanics And Materials, 110-11 . pp. 949-955.

Mozafari, Hamid and Ayob, Amran and Abdi, Behzad and Alias, Amran (2012) Mechanical behavior between carbon fiber and epoxy matrix for thin adhesive layers. Applied Mechanics And Materials, 121-12 . pp. 4426-4430. ISSN 1660-9336

Musa, Md. Nor and Osman, Kahar and A. Hamat, Ab. Malik (2012) Computational analysis of flow field around Ahmed Car Model passing underneath a flyover. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 190-198. ISSN 0094-243X

Nasution, Henry and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Perang, Mohd. Rozi and Abdul Rahman, Abdul Halim (2012) Experimental evaluation of automotive air-conditioning using HFC-134a and HC-134a. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 997-1002. ISSN 0094-243X

Nechaev, Yu S. and Ochsner, A. (2012) On the hydrogen-graphene layers interactions, relevance to the onboard storage problem. Journal of Nanoscience and Nanotechnology, 12 (10). pp. 8169-8200. ISSN 1533-4880

Niakan, Aliasghar and Idris, Mohd. Hanafi and Karimian, Majid and Ourdjini, Ali (2012) Effect of pressure on structure and properties of lost foam casting of al-11si cast alloy. Applied Mechanics And Materials, 110-11 . pp. 639-643. ISSN 1660-9336

Niakan, Aliasghar and Idris, Mohd. Hasbullah and Ourdjini, Ali and Majid, Karimian (2012) Properties of pressurized lost foam casting of al-11si alloy. Advanced Materials Research, 383-39 . pp. 1730-1734. ISSN 1022-6680

Niazi, Abdolkarim and Redzuan, Norizah and Raja Hamzah, Raja Ishak and Esfandiari, Sara (2012) Improvement on supporting machine learning algorithm for solving problem in immediate decision making. Advanced Materials Research, 566 . pp. 572-579. ISSN 1022-6680

Nik Mohd., Nik Ahmad Ridhwan and Barakos, George N. (2012) Computational aerodynamics of hovering helicopter rotors. Jurnal Mekanikal, 34 . pp. 16-46. ISSN 0127-3396

Nikakhtar, Amin and Hosseini, Alireza Abbasian and Wong, Kuan Yew (2012) Sensitivity analysis of construction processes using computer simulation: a case study. Advanced Science Letters, 13 (1). pp. 680-684. ISSN 1936-6612

Noorazizi, M. S. and Che Sidik, Nor Azwadi (2012) Numerical investigation of flow through porous media using Lattice Boltzmann Method. AIP Conference Proceedings, 1440 . pp. 863-869. ISSN 0094-243X

Noordin, Mohd. Yusof and Davoudinejad, Ali and Shaari, Mohd. Rosmaini (2012) Effect of tool edge geometry on cutting force and surface roughness when hard turning tool steel. Advanced Materials Research, 505 . pp. 15-19. ISSN 1022-6680

Noordin, Mohd. Yusof and Kurniawan, D. and Tang, Y. C. and Muniswaran, K. (2012) Feasibility of mild hard turning of stainless steel using coated carbide tool. International Journal of Advanced Manufacturing Technology, 60 (9-12). pp. 853-863. ISSN 0268-3768

Ahmad, Norhayati and Sueyoshi, Hidekazu (2012) Densification and mechanical properties of electroconductive si3n4-based composites prepared by spark plasma sintering. Sains Malaysiana, 41 (8). ISSN 0126-6039

Noshadi, Amin and Mailah, Musa (2012) Active disturbance rejection control of a parallel manipulator with self learning algorithm for a pulsating trajectory tracking task. Scientia Iranica, 19 (1). pp. 132-141. ISSN 1026-3098

Noshadi, Amin and Mailah, Musa and Zolfagharian, Ali (2012) Intelligent active force control of a 3-RRR parallel manipulator incorporating fuzzy resolved acceleration control. Applied Mathematical Modelling, 36 (6). pp. 2370-2383. ISSN 0307-904X

Noshadi, Amin and Zolfagharian, Ali and Wang, Gang (2012) Performance analysis of the computed torque based active force control for a planar parallel manipulator. Applied Mechanics And Materials, 110-11 . pp. 4932-4940. ISSN 1660-9336

Nusyirwan, Istan F. and Perumah, Kannan (2012) RVSM implementation in Malaysia. Applied Mechanics and Materials, 225 . pp. 522-527. ISSN 1660-9336

Ochsner, Andreas and Da Silva, Lucas F. M. and Altenbach, H. (2012) Foreword. Materialwissenschaft Und Werkstofftechnik, 43 (5). p. 365. ISSN 0933-5137

Olugu, Ezutah Udoncy and Wong, Kuan Yew (2012) An expert fuzzy rule-based system for closed-loop supply chain performance assessment in the automotive industry. Expert Systems with Applications, 39 (1). pp. 375-384. ISSN 0957-4174

Omar, Aisyah and Ishak, Muhammad Ikman and Harun, Muhamad Noor and Sulaiman, Eshamsul and Abu Kasim, Noor Hayaty (2012) Effects of different angulation placement of mini-implant in orthodontic. Applied Mechanics And Materials, 121-12 . pp. 1214-1219. ISSN 1660-9336

Omar, Mohd. Faizan Marwah and Sharif, S. and Ibrahim, M. and Hehsan, Haffidzudin and M. Busar, M. N. and Hafsa, M. N. (2012) Evaluation of direct rapid prototyping pattern for investment casting. Advanced Materials Research, 463-46 . pp. 226-233. ISSN 1022-6680

Osman, Azlina Saliza and Ourdjini, Ali and Idris, Siti Rabiatull Aisha and Azmah Hanim, Mohd. Ariff (2012) Effect of different aging temperatures on interfacial reaction between SAC305 and enepig surface finish. Advanced Materials Research, 415-41 . pp. 1181-1185. ISSN 1022-6680

Prawoto, Yunan (2012) How to compute plastic zones of heterogeneous materials : a simple approach using classical continuum and fracture mechanics. International Journal of Solids and Structures, 49 (15-16). pp. 2195-2201. ISSN 0020-7683

Prawoto, Yunan (2012) Incorporating the morphological difference of corrosion cracks in computational fracture mechanics approach. Computational Materials Science, 56 . pp. 166-168. ISSN 0927-0256

Prawoto, Yunan (2012) Seeing auxetic materials from the mechanics point of view : a structural review on the negative poisson's ratio. Computational Materials Science, 58 . pp. 140-153. ISSN 0927-0256

Prawoto, Yunan and Dillon, Barry (2012) Failure analysis and life assessment of coating: the use of mixed mode stress intensity factors in coating and other surface engineering life assessment. Jornal of Failure Analysis and Prevention, 12 (2). pp. 190-197. ISSN 1547-7029

Prawoto, Yunan and Djuansjah, J. R. P. and Shaffiar, N. B. (2012) Re-visiting the 'rule of mixture' used in materials with multiple constituting phases: a technical note on morphological considerations in austenite case study. Computational Materials Science, 65 . pp. 528-535. ISSN 0927-0256

Prawoto, Yunan and Djuansjah, Joy Rizki Pangestu and Wan Nik, W. B. and Enemuoh, Emmanuel (2012) Critical view on the usage of C-ring specimen for stress corrosion crack (SCC) test on orthopedic implant : experimental, numerical and analytical approaches. Materials Science and Engineering C, 32 . pp. 1271-1279. ISSN 0928-4931

Prawoto, Yunan and Fanone, M. and Shahedi, Saeid and Ismail, M. S. and Wan Nik, Wan Sani (2012) Computational approach using Johnson-Cook model on dual phase steel. Computational Materials Science, 54 . pp. 48-55. ISSN 0927-0256

Prawoto, Yunan and Jasmawati, N. and Sumeru, Kasni (2012) Effect of prior austenite grain size on the morphology and mechanical properties of martensite in medium carbon steel. Journal of Materials Science and Technology, 28 (5). pp. 461-466. ISSN 1005-0302

Prawoto, Yunan and Kamsah, Nazri and Ahmad, Zaini (2012) Exploring the potential use of adhesion strength for coating analysis. International Journal of Applied Physics and Mathematics, 2 (2). pp. 67-72. ISSN 2010-362X

Prawoto, Yunan and Mat Yajid, Muhamad Azizi (2012) Stress distribution among constituting phases within the austenite microstructure : mechanics and metallurgical approaches using 2-d model of stainless steel compact tension specimen. Computational Materials Science, 60 . pp. 105-112. ISSN 0927-0256

Prawoto, Yunan and Onn, Irwan H. (2012) Application of J-integral concept on blister coating problem. Engineering Fracture Mechanics, 92 . pp. 114-125. ISSN 0013-7944

Prawoto, Yunan and Onn, Irwan Herman (2012) Modified fourier solution for diffusion governing law applied to blister formation and development. Computational Materials Science, 62 . ISSN 0927-0256

Prawoto, Yunan and Sumeru, K. and Wan Nik, W. B. (2012) Stress corrosion cracking of steel and aluminumin sodium hydroxide: field failure and laboratory test. Advances in Materials Science and Engineering, 2012 . pp. 1-8. ISSN 1687-6822

Prawoto, Yunan and Sumeru, Kasni and Wan Nik, Wan Mohd. Norsani (2012) Stress corrosion cracking of steel and aluminum in sodium hydroxide: field failure and laboratory test. Advances in Materials Science and Engineering, 2012 (235028). pp. 1-8. ISSN 1687-8434

Priyanto, A. and Maimun, A. and Noverdo, S. and Saeed, J. and Faizal, A. and Waqiyuddin, M. (2012) A study on estimation of propulsive power for wing in ground effect (WIG) craft to take-off. Jurnal Teknologi, 59 . pp. 43-51. ISSN 2231-7376

Rad, H. R. B. and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Farahany, S. (2012) Microstructure analysis and corrosion behavior of biodegradable Mg-Ca implant alloys. Materials and Design, 33 (1). pp. 88-97. ISSN 0264-1275

Rahimian Koloor, Seyed Saeid and Abdi, Behzad and Abdullah, M. R. and Amran, Ayob and Yahya, Mohd. Yazid (2012) Effect of strain rate upsetting process on mechanical behaviour of epoxy polymer. Applied Mechanics and Materials, 229-23 . pp. 303-308. ISSN 1660-9336

Rahimuddin, Rahimuddin and Maimun, Adi and Abdul Ghani, Pauzi and Priyanto, Agoes and Muhammad, Andi Haris (2012) Nonlinear response of SemiSWATH ship, bow-diving, and fin stabilizer effect in following seas. International Journal of Engineering & Technology IJET-IJENS, 12 (2). pp. 38-47. ISSN 2077-1185

Abdul Rahman, Mohd. Nasrull and Abdol Rani, Mat Rebi and Mohd. Rohani, Jafri (2012) Investigation of work-related musculoskeletal disorders in wall plastering jobs within the construction industry. Work, 43 (4). pp. 507-514. ISSN 1051-9815

Rahmandoust, Moones and Öchsner, Andreas (2012) Buckling behaviour and natural frequency of zigzag and armchair single-walled carbon nanotubes. Journal Of Nano Research, 16 . pp. 153-160. ISSN 1662-5250

Rahmandoust, Moones and Öchsner, Andreas (2012) On finite element modeling of single- and multi-walled carbon nanotubes. Journal of Nanoscience and Nanotechnology, 12 (10). pp. 8129-8136. ISSN 1533-4880

Raja Ahsan Shah, Raja Mazuir and Jones, R. P. and Pawar, J. S. (2012) System modelling and analysis of the driveability response of 4WD vehicle. International Review of Mechanical Engineering, 6 (3). pp. 595-601. ISSN 1970-8734

Rajoo, Srithar and Romagnoli, Alessandro and Martinez Botas, Ricardo F. (2012) Unsteady performance analysis of a twin-entry variable geometry turbocharger turbine. Energy, 38 (1). pp. 176-189. ISSN 0360-5442

Rasid, Zainudin A. and Mazlan, Saiful Amri and Ayob, Amran and Zahari, Rizal and Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2012) The strain energy tuning of the shape memory alloy on the post-buckling of composite plates using finite element method. Advanced Materials Research, 445 . pp. 577-582. ISSN 1662-8985

Ridzuan, M.J.M. and Hafis, S. M. and Saifullah, K. N. and Syahrullail, S. (2012) A study of minimum quantity lubricant of refined bleached deodorized palm stearin in plane strain extrusion. AIP Conference Proceedings, 1440 . pp. 900-904. ISSN 0094-243X

Rohani, Behzad and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and M. Saqr, Khalid (2012) Comparison of Eddy Dissipation Model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 384-391. ISSN 0094-243X

Romagnoli, Alessandro and Copeland, Colin D. and Martinez-Botaz, Ricardo and Seiler, Martin and Rajoo, Srithar and Costall, Aaron (2012) Comparison between the steady performance of double-entry and twin-entry turbocharger turbines. Journal of Turbomachinery, 135 (1). ISSN 0889-504X

S., Alexandrov and Yusof, Mustafa (2012) A three dimensional limit load solution for highly undermatched single edge cracked specimens in pure bending. Fatigue and Fracture of Engineering Materials and Structures, 36 (5). pp. 375-381. ISSN 8756-758X

Saad, Mohd. S. and Jamaluddin, Hishamuddin and Mat Darus, Intan Zaurah (2012) Iterative algorithm for active vibration control of flexible beam. International Review of Mechanical Engineering, 6 (1). pp. 61-73. ISSN 1970-8734

Saad, Mohd. Sazli and Jamaluddin, Hishamuddin and Mat Darus, Intan Zaurah (2012) Implementation of PID controller tuning using differential evolution and genetic algorithms. International Journal of Innovative Computing, Information and Control, 8 (11). pp. 7761-7779. ISSN 1349-4198

Saat, Aminuddin and Dutta, Nilabza and A. Wahid, Mazlan (2012) Characterisation of aerosol combustible mixtures generated using condensation process. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . ISSN 0094-243X

Sadeghipour, Sakineh and Ghaderian, Javad and A. Wahid, Mazlan (2012) Advances in aluminum powder usage as an energetic material and applications for rocket propellant. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . ISSN 0094-243X

Safari, H. and Sharif, S. and Izman, S. and Jafari, H. (2012) High speed dry end milling of ti-6al-4v alloy towards nano-scale surface roughness. Journal of Applied Sciences Research, 8 (11). pp. 5280-5284. ISSN 1816-157X

Safdari, A. and Kermani, E. P. and C. S., Nor Azwadi (2012) Simulation of mixed convection around a square by using LBM. Applied Mechanics and Materials, 229-23 . pp. 2145-2149. ISSN 1660-9336

Saha, Sumon and Hussein, Ahmed Kadhim and Khan, Waqar and Mohammed, Hussein A. and Pakdee, Watit and Hasanpour, Arman (2012) Effects of diameter ratio of adiabatic circular cylinder and tilt angle on natural convection from a square open tilted cavity. Heat Transfer - Asian Research, 41 (5). pp. 388-401. ISSN 1099-2871

Said, Mazlan and Aziz, Azhar Abdul and Muhamad Said, Mohd. Farid (2012) Effect of palm methyl ester - diesel blends performance and emission of a single-cylinder direct-injection diesel engine. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 562-570. ISSN 0094-243X

Said Salleh, Syarifah Syahirah and Osman, Kahar and Redzuan, Kamarul and Ngali, Zamani and Hadi, Nasrul (2012) Unsteady pressure fluctuation for internal flow in a cylinder using LES model. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 782-788. ISSN 0094-243X

Saleh, AliReza Tavakolpour and Mailah, Musa (2012) Control of resonance phenomenon in flexible structures via active support. Journal Of Sound And Vibration, 331 (15). pp. 3451-3465. ISSN 0022-460X

Salema, Arshad Adam and Ani, Farid Nasir (2012) Microwave-assisted pyrolysis of oil palm shell biomass using an overhead stirrer. Journal of Analytical and Applied pyrolysis, 96 . pp. 162-172. ISSN 0165-2370

Osman, Saliza Azlina and Ourdjini, Ali and Idris, Siti Rabiatull Aisha (2012) Effect of nickel doping on interfacial reaction between lead-free solder and ni-p substrate. Advanced Materials Research, 488-48 . pp. 1375-1379. ISSN 1022-6680

Salman, B. H. and Mohammed, H. A. and Kherbeet, A. S. (2012) Heat transfer enhancement of nanofluids flow in microtube with constant heat flux. International Communications in Heat and Mass Transfer, 39 (8). pp. 1195-1204. ISSN 0735-1933

Samion, Syahrullail and Shunpei, Kamitani and Kenji, Nakanishi (2012) Experimental evaluation of refined, bleached, and deodorized palm olein and palm stearin in cold extrusion of aluminum a1050. Tribology Transactions, 55 (2). pp. 199-209. ISSN 1040-2004

Samion, Syahrullail and Tiong, Chiong Ing and Abdul Kadir, Mohammed Rafiq and Yahya, Azli (2012) The effect of temperature on the tribological behavior of RBD palm stearin. Tribology Transactions, 55 (5). pp. 539-548. ISSN 1040-2004

Saqr, Khalid M. and Kassema, Hassan I. and Aly, Hossam S. and Wahid, Mazlan Abdul (2012) Computational study of decaying annular vortex flow using the R-epsilon/K-epsilon turbulence model. Applied Mathematical Modelling, 36 (10). pp. 4652-4664. ISSN 0307-904X

M. Saqr, Khalid and Kassem, Hassan I. and Aly, Hossam S. and Abdul Wahid, Mazlan (2012) Computational study of decaying annular vortex flow using the r ε/k-ε turbulence model. Applied Mathematical Modelling, 36 (10). pp. 4652-4664. ISSN 0307-904X

Sari, M. M. and Mohd. Yusof, Noordin and Brusa, E. (2012) Evaluating the electrical discharge machining (EDM) parameters with using carbon nanotubes. IOP Conference Series: Materials Science and Engineering, 40 (1). ISSN 1757-8981

Sharif, Safian and Akhavan Farid, Ali and Idris, Mohd. Hasbullah (2012) Tool life prediction model of uncoated carbide tool in high speed drilling of Al-Si alloy using response surface methodology. International Journal of Surface Science and Engineering, 6 (1-2). pp. 112-121. ISSN 1749-785X

Sharifi Teshnizi, Shokrollah and Sharifishourabi, Gholamali and Rahimian Koloor, Seyed Saeid and Ayob, Amran and Mohd. Yazid, Yahya (2012) Effect of ply thickness on displacements and stresses in laminated GFRP cylinder subjected to radial load. Advanced Materials Research, 488-48 . pp. 367-371. ISSN 1022-6680

Shayganpour, Amir Reza and Idris, Mohd. Hasbullah and Izman, Sudin and Farahany, Saeed (2012) Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 1264-1270. ISSN 0094-243X

Shayganpour, Amir Reza and Idris, Mohd. Hasbullah and Sudin, Izman and Jafari, Hossein (2012) Doe applied to study the effect of process parameters on silicon spacing in lost foam Al-Si-Cu alloy casting. IOP Conference Series: Materials Science and Engineering, 36 (1). ISSN 1757-8981

Sheldareh, A. A. and Safdari, A. and Pourtousi, M. and Che Sidik, Nor Azwadi (2012) Prediction of particle dynamics in lid-driven cavity flow. International Review on Modelling and Simulations, 5 (3). pp. 1344-1347. ISSN 1974-9821

Md. Sheriff, Jamaluddin and Osman, Kahar and Asral, Asral (2012) Effect of semi-circular wavy liner on performance of journal bearing. 4th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2, 1440 . pp. 571-577. ISSN 0094-243X

Sindhu I., Imran and Abdul Rahman, Rosly (2012) Formation of microgrooves on glass and PMMA using low power CO2 laser. Journal of Optoelectronics and Advanced Materials, 14 . pp. 877-884. ISSN 1454-4164

Sudin, Izman and Shayganpour, Amirreza and Idris, Mohd. Hasbullah and Jafari, Hassan (2012) Doe analysis of the influence of sand size and pouring temperature on porosity in LFC. Applied Mechanics And Materials, 121-12 . pp. 2661-2665. ISSN 1660-9336

Sulaiman, Mohd. Hafis and Mohd. Jamir, Mohd. Ridzuan and Wan Nordin, Imaduddin Helmi and Samion, Syahrullail (2012) Effect of extrusion ratio on paraffinic mineral oil lubricant in cold forward extrusion. AIP Conference Proceedings, 1440 . pp. 556-561. ISSN 0094-243X

Sulaiman, O. and Saharuddin, A. H. and Kader, Abd. Saman (2012) Human reliability analysis (HRA) emanating from use of technology for ships navigating within coastal area. African Journal of Business Management, 6 (10). pp. 3602-3612. ISSN 1993-8233

Sulaiman, O. O. and Wan Nik, W. B. and Saharuddin, A. H. and Abd. Kader, Ab. Saman (2012) Study of packing density and temperature on the oil sorption capacity of packed local kapok fiber as bio-oil spill absorbent. Biosciences Biotechnology Research Asia, 9 (1). pp. 53-61. ISSN 0973-1245

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Burhaumudin, Mohammad Safwan (2012) Groundhook control of semi-active suspension for heavy vehicle. International Journal of Research in Engineering and Technology, 1 (3). pp. 146-152. ISSN 2277-4378

Sulaimon, Shodiya and Abdulaziz, Azhar and Darus, Amer Nordin (2012) Improved refrigerant characteristics flow predictions in adiabatic capillary tube. Research Journal of Applied Sciences, Engineering and Technology, 4 (13). pp. 1922-1927. ISSN 2040-7467

Sulong, Mohd. Ayub and Ochsner, A. (2012) Finite element simulation of the macroscopic heat conductivity of syntactic perforated hollow sphere structures. Materialwissenschaft und Werkstofftechnik, 43 (5). pp. 461-467. ISSN 0933-5137

Sulong, Mohd. Ayub and Ochsner, Andreas (2012) Prediction of the elastic properties of syntactic perforated hollow sphere structures. Computational Materials Science, 53 (1). pp. 60-66. ISSN 0927-0256

Sumeru, K. and Nasution, H. and Ani, Farid Nasir (2012) A review on two-phase ejector as an expansion device in vapor compression refrigeration cycle. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4927-4937. ISSN 1364-0321

Sumeru, Sumeru and Nasution, Henry and Ani, Farid Nasir (2012) The application of gas ejector for road transport air conditioning system. AIP Conference Proceedings, 1440 . pp. 1133-1140. ISSN 0094-243X

Syahrom, Ardiyansyah and Abdul Kadir, Mohammed Rafiq and Abdullah, Jaafar and Ochsner, Andreas (2012) Permeability studies of artificial and natural cancellous bone structures. Medical Engineering and Physics, 35 (6). pp. 792-799. ISSN 1350-4533

Syed Hassan, Syed Ahmad Helmi and Mohd. Yusof, Khariyah and Mohammad, Shahrin and Abu, Mohd. Salleh and Tasir, Zaidatun (2012) Methods to study enhancement of problem solving skills in engineering students through cooperative problem-based learning. Procedia - Social and Behavioral Sciences, 56 . pp. 737-746. ISSN 1877-0428

Taib I., Ishkrizat and Amirnordin, Shahrin Hisham and Madon, Rais Hanizam and Mustafa, Norrizal (2012) The effect of flow recirculation on abdominal aortic aneurysm. AIP Conference Proceedings, 1440 . pp. 130-135. ISSN 0094-243X

Teshnizi, S. S. and Sharifishourabi, G. and Mohd. Yazid, Yahya and Ayob, Amran (2012) Mechanical behavior of composite plate under combined impact and internal pressure. Applied Mechanics and Materials, 229-23 . pp. 732-736. ISSN 1660-9336

Teshnizi, Sharifi and Koloor, S. S. R. and Sharifishourabi, G. and Ayob, Amran and Mohd. Yazid, Yahya (2012) Mechanical behavior of GFRP laminated composite pipe subjected to uniform radial patch load. Advanced Materials Research, 488-48 . pp. 542-546. ISSN 1022-6680

Vaghefinezhad, Sayedmohammadreza and Kuan, Yew Wong (2012) A genetic algorithm approach for solving a flexible job shop scheduling problem. International Journal of Computer Science Issues, 9 (3). pp. 85-90. ISSN 1694-0814

Veyhl, Christoph and Fiedler, Thomas and Herzig, Tobias and Öchsner, Andreas and Bernthaler, Timo and V. Belova, Irina and E. Murch, Graeme (2012) Thermal conductivity computations of sintered hollow sphere structures. Metals, 2 . pp. 113-121. ISSN 2075-4701

Wan Hassan, Wan Anuar and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Wan Abdullah, Wan Ahmad Kamil and Haron, Juhara and Ngali, Mohd. Zamani (2012) Effect of anastomosis angle on hemodynamic of side-to-end radiocephalic arteriovenous fistula (RCAVF). AIP Conference Proceedings, 1440 . pp. 665-670. ISSN 0094-243X

Wan Nik, W. B. and Samion, Syahrullail and Rosliza, R. and Rahman, Mohammad Mansur and Zulkifli, Mohammad fakhratul Ridwan (2012) Corrosion behaviour of aluminium alloy in palm oil methyl ester (b100). Jurnal Teknologi (Sciences and Engineering), 58 (SUP. 2). pp. 73-76. ISSN 0127-9696

Wan Nik, W. B. and Syahrullail, S. and Rosliza, R. and Rahman, M. M. and Zulkifli, M. F. R. (2012) Corrosion behaviour of aluminium alloy in palm oil methyl ester (B100). Jurnal Teknologi, 58 . pp. 73-76. ISSN 2231-7376

WanNik, W. B. and Ayob, A. F. and Samion, Syahrullail and Masjuki, H. H. and Ahmad, M. F. (2012) The effect of boron friction modifier on the performance of brake pads. International Journal of Mechanical and Materials Engineering, 7 (1). pp. 31-35. ISSN 1823-0334

Wiriadidjaja, Surjatin and Hasim, Fadilah and Mansor, Shuhaimi and Asrar, Waqar and Mohd. Rafie, Azmin Shakrine and Abdullah, Ermira Junita (2012) Subsonic wind tunnels in Malaysia: a review. Applied Mechanics and Materials, 225 . pp. 566-571. ISSN 1660-9336

Wong, Kuan Yew and Komarudin, Komarudin (2012) Parameter tuning of ant system using fuzzy logic controller. International Journal of Operational Research, 15 (2). pp. 125-135. ISSN 1745-7645

Yaakob, Omar and Nasirudin, A. and Abdul Ghani, Mohamad Pauzi and Mat Lazim, Tholudin and Abdul Mukti, Mohamad Afifi and Ahmed, Y. M. (2012) Parametric study of a low wake-wash inland waterways catamaran. Scientia Iranica, 19 (3). pp. 463-471. ISSN 1026-3098

Yousefi, Moslem and Darus, Amer Nordin (2012) Optimal design of plate-fin heat exchangers by particle swarm optimization. Proceedings Of Spie - The International Society For Optical Engineering, 8350 . ISSN 0277-786X

Yousefi, Moslem and Darus, Amer Nordin and Mohammadi, Hossein (2012) An imperialist competitive algorithm for optimal design of plate-fin heat exchangers. International Journal Of Heat And Mass Transfer, 55 . pp. 3178-3185. ISSN 0017-9310

Yousefi, Moslem and Enayatifar, Rasul and Darus, Amer Nordin (2012) Optimal design of plate-fin heat exchangers by a hybrid evolutionary algorithm. International Communications In Heat And Mass Transfer, 39 (2). pp. 258-263. ISSN 0735-1933

Yousefi, Moslem and Enayatifar, Rasul and Darus, Amer Nordin and Abdullah, Hanan (2012) A robust learning based evolutionary approach for thermal-economic optimization of compact heat exchangers. International Communications in Heat and Mass Transfer, 39 (10). pp. 1605-1615. ISSN 0735-1933

Yunan, Prawoto and Mat Yajid, Muhamad Azizi and Ahmad, Zaini (2012) Coating life assessment : the use of adhesion strength in parametric development in coating degradation evaluation. Advanced Materials Research, 48 . pp. 427-431. ISSN 1022-6680

Zakaria, Kristison and Dalgarno, Kenneth William (2012) Influence of distortion on part accuracy for indirect metal laser sintering. Lasers In Engineering, 22 . pp. 383-392. ISSN 0898-1507

Zakaria, Mohamad Shukri and Osman, Kahar and Musa, Md. Nor (2012) Boil-off gas formation inside large scale liquefied natural gas (LNG) tank based on specific parameters. Applied Mechanics and Materials, 229-31 . pp. 690-694. ISSN 1662-7482

Zakaria, Mohd. Zakimi and Jamaluddin, Hishamuddin and Ahmad, Robiah and Loghmanian, Sayed Mohammad Reza (2012) Comparison between multi-objective and single-objective optimization for the modeling of dynamic systems. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 226 (7). pp. 994-1005. ISSN 0959-6518

Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Hemdi, Abdul Rahman (2012) Critical success factors of green design implementation for Malaysia automotive industry. Advanced Materials Research, 383-39 . pp. 3395-3402. ISSN 1022-6680

Zakuan, Norhayati and Mohd. Yusof, Sha’ri and Mat Saman, Muhamad Zameri and Mohd. Shaharoun, Awaluddin and Laosirihongthong, Tritos (2012) The moderator effects of ISO/TS16949 certification in Thailand automotive industry. Procedia - Social and Behavioral Sciences, 40 . pp. 141-145. ISSN 1877-0428

Zheng, Yu and Mohd. Taib, Jamaludin and Md. Tap, Masine (2012) Decomposition of interacting machining features based on the reasoning on the design features. International Journal of Advanced Manufacturing Technology, 58 (1-4). pp. 359-377. ISSN 0268-3768

Zolfagharian, A. and Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abdul Rahim and Asarry, A. (2012) Suppressing chatter noise in windscreen wiper operation using a robust hybrid controller. International Review of Mechanical Engineering, 6 (3). pp. 630-635. ISSN 1970-8734

Book Section

Abdul Hamid, Mohd. Kameil and Stachowiak, G. W. and Samion, Syahrullail (2012) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 905-913. ISBN 978-073541032-9

Abdul Wahid, Mazlan and Ahmad Faiz, M. Z. and Saqr, Khalid M. (2012) Direct thrust force measurement of pulse detonation engine. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Melville, New York, pp. 1257-1263. ISBN 978-073541032-9

Abdul Wahid, Mazlan and Ujir, Haffis (2012) Reacting shock waves characteristics for biogas compared to other gaseous fuel. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 90-99. ISBN 978-073541032-9

Abdullah, H. B. and Kamsah, Nazri (2012) Stability of cementless hole and non-hole hip prosthesis. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 33-37. ISBN 978-145771989-9

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Robiah (2012) Cooling of a rectangular microchannel heat sink with ammonia gas. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 57-64. ISBN 978-073541032-9

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar (2012) Homogenous charge compression ignition (HCCI) technique: a review for application in two-stroke gasoline engines. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 53-57. ISBN 978-303785413-6

Ani, Farid Nasir and Mat Nor, Nor Syarizan (2012) Microwave induced fast pyrolysis of scrap rubber tires. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 834-841. ISBN 978-073541032-9

Bengsoon, Matthias Edric and Abu Bakar, Abdul Rahim and Abdul Hamid, Mohd. Kameil (2012) Structural modification of disc brake judder using finite element analysis. In: Applied Mechanics and Materials. Trans Tech Publications, Zurich, Switzerland, pp. 68-72. ISBN 978-303785413-6

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) The effect of unburned gas axial velocity on the characteristics of rotational flame during flashback. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1285-1291. ISBN 978-073541032-9

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) Flashback of laminar premixed flame in rotating burner. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1292-1299. ISBN 978-073541032-9

Che Sidek, Nor Azwadi and Goh, C. K. and Afiq Witri, M. Y. (2012) Computational analysis of heat flow in computer casing. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 199-208. ISBN 978-073541032-9

Che Sidek, Nor Azwadi and Salehi, Mehran and Witri, Afiq (2012) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 650-658. ISBN 978-073541032-9

Che Sidik, Nor Azwadi and Afiq Witrib, M. Y. (2012) Simulation of multicomponent multiphase flow using lattice Boltzmann method. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1025-1039. ISBN 978-073541032-9

Che Sidik, Nor Azwadi and Shukri, Z. Mohamad and Afiq Witri, M. Y. (2012) Numerical investigation of 2D lid driven cavity using smoothed particle hydrodynamics (SPH) method. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 789-798. ISBN 978-073541032-9

Gohari, Mohammad and Abd. Rahman, Roslan and Raja Hamzah, Raja Ishak and Tahmasebi , Mona (2012) Bus seat suspension modification for pregnant women. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 404-407. ISBN 978-145771989-9

Golshokouh, Iman and Ani, Farid Nasir and Samion, Syahrullail (2012) Wear resistance evaluation of palm fatty acid distillate using four-ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 928-935. ISBN 978-073541032-9

Hadzri, Edi Azali and Shamsudin, Amir Hamzah and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Abdul Aziz, Azian (2012) Effects of irregular cerebrospinal fluid production rate in human brain ventricular system. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 659-664. ISBN 978-073541032-9

Hosseini, Seyed Ehsan and Salehirad, Saber and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saat, Aminuddin (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1309-1312. ISBN 978-073541032-9

Jafari, Hassan and Sadeghi, Rasoul and Idris, Mohd. Hasbullah and Ourdjini, Ali (2012) Effect of flux composition on mould-magnesium reaction during in-situ melting. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 480-485. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, A. and Zamani, Zamani and Pauzi, Pauzi and Saman, Saman (2012) Effect of stern hull shape on turning circle of ships. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 1191-1196. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, Agoes and Ahmad, Mohd. Zamani and Abdul Ghani, Mohamad Pauzi and Saman, Saman (2012) Study on zigzag maneuver characteristics of V-U very large crude oil (VLCC) tankers. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1128-1132. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Priyanto, Agoes and Abdul Wahid, Mazlan and Zamani, Zamani and Saman, Saman and Pauzi, Pauzi (2012) An integrated CFD simulation tool in naval architecture and offshore (NAO) engineering. In: 4Th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 1175-1181. ISBN 978-073541032-9

Jong, Rudiyanto P. and Osman, Kahar and M. Adib, M. Azrul Hisham (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Melville, New York, pp. 604-611. ISBN 978-073541032-9

Kamaruddin, T. N. A. T. and Mat Darus, Intan Zaurah (2012) System identification for internal combustion engine model. In: Proceedings - 6th Asia International Conference on Mathematical Modelling and Computer Simulation, AMS 2012. IEEE, New York, USA, pp. 17-22. ISBN 978-076954730-5

Kamsah, Nazri and Tamin, Mohd. Nasir and Mohamed Kamar, Haslinda and Lahuri, Hidayatunnur and Wagiman, Amir Nur Rashid (2012) Development of vapor pressure in FR4-copper composite material during solder reflow process. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Melville, New York, pp. 116-123. ISBN 978-073541032-9

Kaviri, A. Ganjeh and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Kaviri, H. Ganjeh (2012) The comparison of various gas turbine inlet aircooling methods for various ambient condition trough energy and exergy analysis. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1141-1155. ISBN 978-073541032-9

Lalmazloumian, Morteza and Wong, Kuan Yew (2012) A review of modelling approaches for supply chain planning under uncertainty. In: 2012 9Th International Conference on Service Systems and Service Management - Proceedings of ICSSSM '12. IEEE, New York, USA, pp. 197-203. ISBN 978-145772025-3

Md. Sheriff, Jamaluddin and Osman, Kahar and Asral, Asral (2012) Effect of semi-circular wavy liner on performance of journal bearing. In: 4Th International Meeting of Advances In Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 571-577. ISBN 978-073541032-9

Mohamed Kamar, Haslinda and Kamsah, Nazri and Md.Tap, Masine and Salimin, K. A. M. (2012) Assessment of thermal comfort in a naturally ventilated residential terrace house. In: 4Th International Meeting of Advances In Thermofluids (IMAT 2011), Pt 1 And 2. American Institute of Physics, New York, USA, pp. 247-254. ISBN 978-073541032-9

Mohamed Kamar, Haslinda and Kamsah, Nazri and Mohammad Nor, Ahmad Miski (2012) Numerical analysis of air-flow and temperature field in a passenger car compartment. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 854-862. ISBN 978-073541032-9

Mohd. Ghazali, Normah and Ghazali, Ahmad Dairobi and Ali , Irwan Shah and A. Rahman, Muhammad Aminullah (2012) Geometry effects on cooling in a standing wave cylindrical thermoacousic resonator. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1320-1324. ISBN 8-073541032-9

Mohd. Ghazali, Normah and Lau Lau, Kwan Yiew and Mohd.Yusoff, S. (2012) Thermal analysis of Malaysian double storey housing - low/medium cost unit. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 513-520. ISBN 978-073541032-9

Mohd. Hazmil Syahidy, Abdol Azis and Che Sidek, Nor Azwadi (2012) Analysis of bouyancy-aided convection heat transfer from horizontal cylinder at low reynolds number. In: 4Th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 49-56. ISBN 978-073541032-9

Mohd. Yusof, Noordin and Davoudinejad, Ali and Shaari, Mohd. Rosmaini (2012) Effect of tool edge geometry on cutting force and surface roughness when hard turning tool steel. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 15-19.

Mohd. Yusop, Mohd. Zamri and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and As'arry, A. (2012) Performance of a passive device in improving tremor patients' handwriting capability. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 400-403. ISBN 978-145771989-9

Motasemi, Farough and Ani, Farid Nasir (2012) Microwave irradiation biodiesel processing of waste cooking oil. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 842-852. ISBN 978-073541032-9

Mozafari, H. and Abdi, B. and Ayob, Amran (2012) Opt.imal design of non-monotonic heat-conducting thin adhesive layer based on imperialist competitive algorithm. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 949-955. ISBN 978-303785262-0

Muhamad Said, Mohd. Farid and Said, Mazlan and Abdul Aziz, Azhar (2012) Modelling of diesel engine fuelled with biodiesel using engine simulation software. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 307-313. ISBN 978-073541032-9

Musa, Md. Nor and Osman, Kahar and Hamat, Ab. Malik A. (2012) Computational analysis of flow field around ahmed car model passing underneath a flyover. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 190-198. ISBN 978-073541032-9

Nasution, Henry and Zainudin, Muhammad Amir and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Perang, Mohd. Rozi and Abdul Rahman, Abd. Halim (2012) Experimental evaluation of automotive air-conditioning using HFC-134A and HC-134A. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 997-1002. ISBN 978-073541032-9

Ngali, Zamani and Osman, Kahar and Johari, Nasrul Hadi (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1040-1048. ISBN 978-073541032-9

Osman, Kahar and Ali, Zairi and Ubaidullah, S. and Zahid, M. N. (2012) Numerical prediction on the dispersion of pollutant particles. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 65-71. ISBN 978-073541032-9

Priyanto, Agoes and Abdul Malik, Adi Maimun and Abdul Ghani, Mohamad Pauzi and Ismail, Nasrudin and Abdul Kader, Ab. Saman (2012) Recurrence wave run up on a large volume semisubmersible. In: Proceedings of the International Offshore and Polar Engineering Conference. The International Society of Offshore and Polar Engineers (ISOPE), California, USA, pp. 942-948. ISBN 978-188065394-4

Saat, Aminuddin and Dutta, Nilabza and Abdul Wahid, Mazlan (2012) Characterisation of aerosol combustible mixtures generated using condensation process. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 109-115. ISBN 978-073541032-9

Sadeghipour, S. and Ghaderian, J. and Abdul Wahid, Mazlan (2012) Advances in aluminum powder usage as an energetic material and applications for rocket propellant. In: 4Th International Meeting of Advances In Thermofluids (IMAT 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 100-108. ISBN 978-073541032-9

Said, Mazlan and Abdul Aziz, Azhar and Muhamad Said, Mohd. Farid (2012) Effect of palm methyl ester - diesel blends performance and emission of a single-cylinder direct-injection diesel engine. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 562-570. ISBN 978-073541032-9

Saktioto, Toto and Ali, Jalil (2012) Non linear optic in fiber bragg grating. In: Optical Fiber Technology. Springer, pp. 83-101. ISBN 978-3-642-31496-4

Samion, Syahrullail and Yahya, Wira Jazair and Abdul Hamid, Mohd. Kameil and W. N., Fawwaz (2012) Wear characteristic of RBD palm olein using four-ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 991-996. ISBN 978-073541032-9

Saqr, Khalid M. and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin (2012) Highly-resolved large eddy simulation of the nonreacting flow in an asymmetric vortex combustor. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 400-408. ISBN 978-073541032-9

Shayganpour, A. and Idris, Mohd. Hasbullah and Sudin, Izman and Farahany, S. (2012) Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 1264-1270. ISBN 978-073541032-9

Syahirah, Syarifah and Osman, Kahar and Redzuan, Kamarul and Ngali, Zamani and Hadi, Nasrul (2012) Unsteady pressure fluctuation for internal flow in a cylinder using LES model. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 782-788.

Vaghefinezhad, Sayedmohammadreza and Wong, Kuan Yew (2012) A genetic algorithm approach for solving group technology problem with process plan flexibility. In: Proceedings - 2012 14th International Conference on Modelling and Simulation, UKSim 2012. IEEE, Cambridge, pp. 52-58. ISBN 978-076954682-7

VilaVandran, Alfred Sagayam and Darus, Amer Nordin (2012) Study of two-dimensional laminar flow in a polar cavity by Ansys Fluent. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 775-781. ISBN 978-073541032-9

Wong, T. T. and Tang, C. H. H. and Mailah, Musa (2012) Robust active heave compensated winch-driven overhead crane system for load transfer in marine operation. In: ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings. IEEE, New York, USA, pp. 111-116. ISBN 978-145771967-7

Wong, T. T. and Tang, Collin Howe Hing and Mailah, Musa (2012) Winch driven active heave compensation for load transfer in overhead crane system. In: ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings. IEEE, New York, USA, pp. 34-39. ISBN 978-145771967-7

Conference or Workshop Item

Abd. Rahman, Roslan and Gohari, Mohammad and Raja, Raja Ishak and Tahmasebi, Mona (2012) Bus seat suspension modification for pregnant women. In: 2012 International Conference on Biomedical Engineering (ICoBE 2012), 27-28 Feb 2012, Bayview Beach Resort Penang, Malaysia.

Abd. Rahman, Roslan and Mona, Tahmasebi (2012) Artificial neural network model for prediction of dynamical behavior in spray boom. In: International Conference on Man Machine System (ICoMMS 2012), 27-28 Feb 2012, Bayview Beach Resort, Penang.

Abdul Rahman, Roslan and Gohari, Mohammad and Tahmasebi, Mona (2012) Off-road seat suspension optimization by particles swarm algorithm. In: ICAMME 2012 : International Conference on Applied Mechanics and Mechanical Engineering, 3-5 Jul 2012, Kuala Lumpur, Malaysia.

Ahmad, Mohd. Zamani (2012) Draft, trim and heel control for LNG ship with hybrid ballast free system. In: Conference, 2012.

Amrina, Elita and Mohd. Yusof, Sha'ri (2012) Drivers and barriers to sustainable manufacturing initiatives in Malaysian automotive companies. In: Conference, 2012.

Ang, Yit Sian and Abdul Malik, Adi Maimun and Priyanto, A. and M. Ahmed, Yasser and Nakisa, Mehdi (2012) Assesment of bank effect in restricted water using computational fluid dynamics. In: 8th International Conference on Marine Technology, 20-22 Oct 2012, Terengganu, Malaysia.

Ani, Farid Nasir (2012) Bio-char and pyroligneous liquid from oil palm leaf stem. In: Conference, 2012.

Ani, Farid Nasir and Salema, Arshad Adam and Hasan, Ismail (2012) Characteristic of bio-oils from oil palm biomass using different pyrolysis processing techniques. In: International Conference on Biomass for Biofuels and Value Added Products (ICBBVAP 2012), 23-24 Oct 2012, Kuala Lumpur, Malaysia.

Balaji, Rajoo and Yaakob, Omar (2012) Envisaging a ballast water treatment system from shipboard waste heat. In: International Conference on Maritime Technology 2012 (ICMT2012), 25-28 June, 2012, Harbin, China.

Boon, Chiang Ng and Mat Darus, Intan Zaurah and Mohamed Kamar, Haslinda and Norazlan, Mohamed (2012) Application of multiplayer perceptron and radial basis funtion neural network IN steady state modeling of automotive air conditioning system. In: 2012 IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2012), 23-25 Nov 2012, Penang, Malaysia.

Che Sidik, Nor Azwadi (2012) Modeling of convective heat transfer of Al2O3-H2O nanofluid in inversed L-shaped cavities. In: International Conference on Science, Technology and Social Science, 2012.

Cheng, Tung Chong and Hochgreb, Simone (2012) Flow field of a model gas turbine swirl burner. In: Advanced Materials Research (Volumes 622-623).

Daud, Mohd. Fadzil and Mohd. Taib, Jamaludin and Sharifudin, Rio Sumarni (2012) Conceptual knowledge in three dimensional computer aided design (3D CAD) modeling: a literature review and conceptual framework. In: The International Conference on Teaching & Learning in Higher Education (ICTLHE 2012), 10-12 Apr 2012, Seremban, Negeri Sembilan.

Farahany, Saeed and Ourdjini, Ali and Azmah, N. and Kamal, R. (2012) Thermal analysis and microscopic characterisation of the Al-20%Mg2Si in-situ composite. In: 21st Scientific Conference of the Microscopy Society Malaysia (MSM), 2012.

Hamzah, Esah (2012) Analysis of Nucleation and bond morphology of nanocrystalline diamonds deposited on tungsten carbide using HFCVD. In: Conference, 2012.

Hamzah, Esah (2012) Facile synthesis of polyaniline-silver composites through interfacial polymerization. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9th to 12th July 2012, Kuala Lumpur, Malaysia.

Hamzah, Esah (2012) Formation of titanium oxide by thermal-electrochemical process on the blasted titanium alloys substrate. In: 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), 9-10 December 2012, Seoul, Korea.

Hamzah, Esah (2012) High temperature creep behavior of austenitic Fe-Ni-Cr alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 7-12 July 2012, Kuala Lumpur, Malaysia.

Helmi, Syed Ahmad and Mohd. Yusof, Khariyah and Mohammad, Shahrin and Abu, Mohd. Salleh (2012) Enhancing team-based problem solving skills among engineering students through cooperative problem-based learning (CPBL). In: International Conference On Teaching and Learning in Higher Education (ICTLHE 2012) in conjunction with Regional Conference on Engineering, Education and Research in Higher Education (RCEE & RHED 2012), 10-12 April 2012.

Idris, Mohd. Hasbullah and Jafari, Hassan and Ourdjini, Ali and Abdul Kadir, Mohammed Rafiq (2012) Effect of flux on in-situ melting shell investment casting of AZ91D magnesium alloy. In: International Conference on Thermal, Material and Mechanical Engineering (ICTMME'2012), 15-16 Jul 2012, Singapore.

Jamei, Saeed and Maimun, Adi and Mansor, Shuhaimi and Priyanto, Agoes and Nor Azwadi, Nor Azwadi (2012) Aerodynamic behavior of a compound wing configuration in ground effect. In: Proceedings of The 6th Asia-Pacific Workshop on Marine Hydrodynamics, 3-4 September 2012, Universiti Teknologi Malaysia, Johor.

James, Adeyemi Ademola and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2012) Development of a holistic backpack-back pain model for school children. In: 2012 Southeast Asian Network of Ergonomics Societies Conference (SEANES), 2012, Langkawi, Malaysia.

Kamsah, Nazri (2012) Effects of natural ventilations on indoor air of a double-storey residential house in Malaysia. In: The 5th International Conference on Advances in Thermal-Fluid, 2012.

Kermani, E.P. and Safdari, A. and Che Sidik, Nor Azwadi (2012) Numerical prediction of heat transfer from heated thin plate in a square cavity by using LBM. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 20-21 Nov 2012, Batu Pahat, Johor.

Kurniawan, Denni and Izman, S. and Budi Wardoyo, Toto Triantoro (2012) Effect of process parameters on qualityof cold spinned tube head. In: 3rd International Conference on Mechanical & Manufacturing Engineering (ICME2012), 20-21 Nov 2012, Batu Pahat, Johor.

Mahamad Hakimi, Ismail and Sharif, Safian and Kurniawan, Denni (2012) Laminate orientation effect on drilling of carbon fiber reinforced plastic composites. In: The 3rd International Conference on Mechanical and Manufacturing Engineering (ICME 2012), 20 - 21 November 2012, UTHM, Malaysia.

Mahmood, Salwa and Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin (2012) Life cycle assessment of membrane system for wastewater treatment : a review and further research. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 2012.

Mailah, Musa and Wong, T. T. and Tang, Collin H. H. (2012) Winch driven active heave compensation for load transfer in overhead crane system. In: International Conference on Intelligent and Advanced Systems (ICIAS2012), 2012.

Mailah, Musa and Wong, T. T. and Tang, Collin H. H. (2012) Robust active heave compensated winch-driven overhead crane system for load transfer in marine operation. In: 4th International Conference on Intelligent and Advanced Systems (ICIAS2012), 12-14 Jun 2012, Kuala Lumpur, Malaysia.

Mat Darus, Intan Zaurah and Zeinali, Mohammadjavad (2012) Fuzzy PID controller simulation for a quarter-car semi active suspension system uisng magnetorheological damper. In: 2012 IEEE Conference on Control, System & Industrial Informatics (ICCSII2012), 2012.

Mat Darus, Intan Zaurah and Zeinali, Mohammadjavad and Taghavi, Amir Hossein (2012) Effect of front double wishbone strut position on vehicle steering and suspension performance. In: 2012 IEEE Conference on Control, System & Industrial Informatics (ICCSII2012), 23-26 Sept 2012, Bandung, Indonesia.

Mohamed Kamar, Haslinda and Kamsah, Nazri and Norull Azman, Norull Ahmad (2012) Application of thermal energy storage system for a lowland greenhouse. In: The 5th International Conference on Advances in Thermal-Fluid, 2012.

Mohd. Ghazali, N. and Ghazali, A. D. and Ali, I. S. and Rahman, M. A. A. (2012) Geometry effects on cooling in a standing wave cylindrical thermoacousic resonator. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011, 3-4, Oct 2011, Melaka, Malaysia.

Mohd. Perang, Mohd. Rozi and Abdul Latiff, Zulkarnain and Mokhri, Mohamad Azzad (2012) Design a four-stroke Homogeneous Charge Compression Ignition (HCCI) engine. In: 5th International Meeting on Advances of Thermofluids, IMAT 2012, 12-13 Nov 2012, Nirwana Resort, Bintan Island, Indonesia.

Muhamad, Sallehuddin (2012) Wind tunnel testing of composite wing flutter speed due to control surface excitation. In: 3rd International Conference on Mechanical and Manufacturing Engineering 2012 (ICME2012), 20-21 November 2012, Malaysia.

Priyanto, Agoes and Abdul Malik, Adi Maimun and Rahimuddin, Rahimuddin and Ang, Yit Sian (2012) Simulation on LNG tanker track-keeping autopilot in canal water. In: 2012 International Conference on System Engineering and Technology, 2012.

Rahimuddin, Rahimuddin and Abdul Malik, Adi Maimun and Abdul Ghani, Muhamad Pauzi (2012) And fin stabilizer effect. In: Proceedings of The 6th Asia-Pacific Workshop on Marine Hydrodynamics, 3-4 September 2012, Universiti Teknologi Malaysia, Johor.

Rahman, Tuan A. Z. and Mat Darus, Intan Zaurah (2012) Active vibration control using pole placement method of a flexible plate structure optimized by genetic algorithm. In: 2012 IEEE Conference on Control, System & Industrial Informatics (ICCSII2012), 2012.

Saat, Aminuddin and Dutta, Nilabza and A. Wahid, Mazlan (2012) Characterisation of aerosol combustible mixtures generated using condensation process. In: The 4th International Meeting of Advances in Thermofluids (IMAT 2011), 2012.

Samion, Syahrullail and Abdul Rahman, Muhammad Amirul (2012) The influence of temperature in wear resistance characteristic of palm fatty acid distillate. In: 5th International Meeting on Advances of Thermofluids, NOV 12-13, 2012, Bintan Island, Indonesia.

Samion, Syahrullail and Yahya, Wira Jazaid and Kameil, A. H. M. and Fawwaz, W. N. (2012) Friction characteristics of RBD palm olein using four-ball tribotester. In: International Conference on Mechanical and Manufacturing Engineering 2012, 20-21 November 2012, Batu Pahat, Johor.

Samion, Syahrullail and Ing, Tiong Chiong (2012) Wear behaviour of palm olein at different operating temperature. In: 5th International Meeting on Advances of Thermofluids, NOV 12-13, 2012, Bintan Island, Indonesia.

Saqr, K. M. and Wahid, M. A. and Sies, M. M. (2012) Highly-resolved large Eddy simulation of the nonreacting flow in an asymmetric vortex combustor. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011, 3-4, Oct 2011, Melaka, Malaysia.

Siana, A. Y. and Maimun, A. and Priyanto, A. and Mohamed, Yasser (2012) Assessment of ship-bank interactions On LNG tanker in shallow water. In: Conference, 2012.

Tahmasebi, Mona and Abdul Rahman, Roslan and Mailah, Musa and Gohari, Mohammad (2012) Active force control applied to spray boom structure. In: ICAMME 2012 : International Conference on Applied Mechanics and Mechanical Engineering, 3-5 Jul 2012, Kuala Lumpur, Malaysia.

Tofa, Mohammad Mobassher and Mohamed, Yasser and Maimun, Adi (2012) Aerodynamic characteristics of a wig craft by numerical simulation. In: International Conference on Marine Technology, 2012, Terengganu, Malaysia.

Yaakob, Omar and Mohd. Omar, Kamaludin and Wan Abdul Aziz, Wan Aminullah and Md. Din, Ami Hassan (2012) Satellite altimeter ocean wave heights data in South China Sea. In: 8th International Conference on Marine Technology (MARTEC), 2012, Terengganu, Malaysia.

Yamin, A. F. M. and Shaffiar, N. M. and Loh, W. K. and Tamin, Mohd. Nasir (2012) Extended cohesive zone model for simulation of solder/IMC interface cyclic damage process in Pb-free solder interconnects. In: 2012 35th IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT), 6-8 November 2012, Ipoh, Malaysia.

Book

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohamad Shaiful Ashrul (2012) Teknik pembakaran hijau: pembakar berbahan api cecair. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0890–4

Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and A. Eldrainy, Yehia (2012) Combustor aerodynamics. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0853–9

Mohd. Taib, Jamaludin and Hanafiah, Khairul Anwar (2012) AUTOCAD for engineers. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0806–5

Thesis

Abd. Gapar, Mohd. Syamsul Bahtiar (2012) Comparative study of mechanical properties for FRP material of different classification society. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Malek, Zain Ashraf (2012) Contaminant removal from rectangular shaped pipeline joints using constrained interpolated profile method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdalla Elsanusi, Omer Salih (2012) Design and simulation of a solar powered absorption refrigerator for small units. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdol Azis, Mohd Hazmil Syahidy (2012) Numerical modeling of hemodynamics in abdominal aortic aneurysm using immersed boundary method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Abdul Hadi (2012) Structure and tribological properties of post-sputtered annealing nickel titanium alloy coatings onto 316l stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Malik, Samir Sani (2012) Effect of zinc addition on the properties of magnesium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rasih, Radzi (2012) Solar absoprtion thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Haslina (2012) The effect of geometry of prosthesis on the stability of hip joint arthroplasty using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah Al-Muhandes, Mohammed Ali (2012) Oil fate and slick trajectory prediction for marine oil pollution control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abubakar, Zubairu (2012) Microwave assisted pyrolysis of oil palm shell (OPS) biomas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afifi Huspi, Hishammudin (2012) Pulse detonation engine performance and thrust improvement using ejector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Shafie, Noor Emilia (2012) Development of an atmospheric combustor test rig for firing envodiesel blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmadianchashmi, Rouzbeh (2012) Evaluation of end milling titanium alloy Ti-6A1-4V using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed Eldrainy, Yehia Abd. Elmonem (2012) Enhancement of palm oil blends atomization and spray using swirling flow. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aladpoosh, Hamid (2012) The effectiveness of project management by stakeholders in enhancing project and stakeholder management. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Akbari, Sheldareh (2012) Kinematic behavior of solid particles in enclosed lid-driven cavity using CIP method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Beik, Amir Mohammad (2012) High temperature behaviour of NiCoCrAIY coated on Ni-based superalloy with ain and aion diffusion barriers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anjomshoae, Ali (2012) Assessment of musculoskeletal disorder and its association with psychosocial work factors among the bus drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arbabzadeh, Iman (2012) 3D modeling of orthogonal cutting on AISI 1045. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ardani, Mohd. Ibthisham (2012) Heat distribution study on turbocharger turbine volute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arjmandi, Mohammadreza (2012) Damage evolution in carbon fiber-reinforced polymer (CFRP) composites under shear fatigue loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Asril Saadun, Mohd. Noor (2012) Numerical analysis on the effects of cavity geometry with heat towards contaminant removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Assadian, Mahtab (2012) The effect of surface treatment and electrophretic deposition on corrosion of biomaterials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azaryoon, Arash (2012) Knowledge-based system for non-conventional machining processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azizan, Muhammad Akmal (2012) Vortex induced vibration on stationary cyclinder using CFD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Muhammad (2012) Framework for end-of-life vehicle recycling system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bakar, Muhammad Aliuddin (2012) Modelling, identification and control of shape memory alloy actuator using intelligence system identification technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Barzani, Mohsen Marani (2012) Effect of silicon morphology on various machinability parameters when turning A1-Si-Cu-Mg alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bhupal Kumar, Seekayapatteda (2012) Properties of gravity die casting of magnesium and aluminium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bodaghi, Behrooz (2012) A binary integer programming model for multi-resource leveling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Kob, Mohd. Salman (2012) A proportional derivative control of an electro-mechanical friction clutch for an electro-mechanical dual acting pulley continuously variable transmission applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dargi, Ahmad (2012) Developing a framework to improve the supplier selection process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Davoudinejad, Ali (2012) Performance evaluation of different edge geometry when turning hardened DF3 tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farahany, Saeed (2012) Evaluation of the effect of additives and their interactions on silicon morphology of aluminium-silicon-copper-magnesium cast alloy by thermal analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farid, Ali Akhavan (2012) High speed drilling of A1-Si (A383) alloy using carbide tools. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Firouzabadi, Farzin (2012) Dynamic response of the pressurized laminated composite cylindrical shell subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Galankashi, Masoud Rahiminezhad (2012) Assessment of supply chain strategies and factors affecting selection of suppliers for electrical companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghasemzadehfahani, Siamak (2012) Disinfection of particle-associated viruses by ultraviolet. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazali, Hanipah (2012) Work improvement at an electronic company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazali, Nur Syazwani (2012) Routing optimization using Chinese Postman Problem for waste collection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazanfari, Seyed Alireza (2012) Simulation of hydrodynamic coefficient of AUV during maneuvering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Haghighati, Razieh (2012) Modeling flow of crowd during tawaf at Masjid Al-Haram. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassim, Mohd. Hazwan (2012) Factors affecting safe navigation and their impacts in port area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Heidari, Mehdi (2012) Mechanical properties of calcium carbonate and coconut shell filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hosseini, Seyed Ehsan (2012) Performance evaluation of mild combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussein, Mohanad Hamzah (2012) Characterization of diesel engine with palm oil at different compression ratio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Roslinda (2012) Modeling and experimental verification of multiphase steel for components subjected to fatigue loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Siti Rabiatull Aisha (2012) Interfacial reactions during soldering of lead-free solders on copper and nickel substrates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idroas, Mohamad Yusof (2012) Design and performance study of an alpha V-type stirling engine converted from diesel engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Irandegani, Mohammad Yousef (2012) Exergy analysis on steam power plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Iskandar Shah (2012) Unsteady aerodynamic wake of helicopter main-rotor-hub assembly. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Ainaa Maya Munira (2012) Flow pattern of particle contamination in fluid flow through mitre bend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahanshaloo, Leila (2012) Simulation of contaminant removal using lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamei, Saeed (2012) Aerodynamic characteristics of compound wing configuration of wing-in-ground effect vehicle. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamid, Mohd. Fairus (2012) Active vibration control of flexible plate structure using smart material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jiran, Nur Syamimi (2012) Logistics strategy for implementation of industrialized building system in Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jumaidin, Ridhwan (2012) Effect of heat treatment on the microstructures and mechanical properties of Fe-Ni-Cr superalloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamali, Fatemeh (2012) Imperialisme competitive algorithm for distribution problem in supply chain network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kasani, Adam (2012) Parametric study on two phased flow in non-adiabatic concentric capillary tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kasesaz, Meysam (2012) An experimental study of soot partices morphology and flame stability in laiminar diffussion flames fuelled by typical biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kasgari, Roja Abedian (2012) Human reach for safety, comfort and efficiency at work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Keshavarz, Meysam (2012) Thermal barrier coating on gamma titanium aluminide by EB-PVD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Keshvari, Bahador (2012) Determining the effect of gender and racial differences on mental and physical tasks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khavaripour, Hesam (2012) Simulation of blood vessel surrounded by tissue during thermal theraphy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khosravani, Mohammad Reza (2012) Vibration analysis of modeled composite aircraft wing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lalmazloumian, Morteza (2012) Robust optimization of tactical supply chain planning of agile manufacturing in build-to-order environment under uncertainty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Le Tran, Trung Kien (2012) Determination of safety inventory under uncertain conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Li, Jia Wei (2012) The system identification of HVAC artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Madadi, Najmeh (2012) A multi-objective fuzzy mixed integer linear programming model for aggregate production planning of an automotive parts manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Malek, Afagh (2012) Assessment of ketchup companies performance in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mashudin, Mirdawati (2012) Production of high bromelain pineapple (ananas comosus) juice by membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Maslan, Mohd. Nazmin (2012) Modelling and identification of piezoelectric actuators using system identification technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Maziar, Reza (2012) Ejector refrigeration cycle for automotive air conditioning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Memari, Ashkan (2012) Performance evaluation of distribution network in a supply chain using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad, Nor Azimah (2012) Determination of road safety index for Malaysia road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Kamal, Mohamad Ridzuan (2012) The effect of rolling temperature on the properties of biodegradable MG-0.7CA alloy for implant application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Azhar (2012) Numerical investigation of thermal fluid flow through porous media from a differentially heated concentric annulus cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Jamil, Fariza (2012) Effect of heat treatment on the microstructures and hardness of Ti-48Al-xCr alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Sharif Ahmed, Salaheldin Ahmed (2012) Chloride stress corrosion cracking of 316L stainless steel in sour gas service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Sultan, Al Amin (2012) Lean manufacturing implementation at automotive manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Khanlou, Hossein (2012) The effect of pre-treatment parameters on titanium alloys prior to PVD coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Pourtousi, Mohammad Pourtousi (2012) Simulation of particle motion in incompressible fluid by lattice boltzmann MRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammadi, Maryam (2012) A mixed integer programming model formulation for solving the lot sizing problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Sa'arani, Adrianna (2012) Vortex formation at sluice gate as used at Department of Irrigation and Drainage Johor (JPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Saleh, Aqel (2012) Information system in accident prevention in UTM Casting Laboratory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Aris, Maslina (2012) Ship hull noise and vibration induced by prime mover - quantitative and qualitative assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Din, Mohd. Azlan Shah (2012) Scaffolding practices at construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Mokhtar, Noor Zaimah (2012) High speed direct nano-crystalline nickel plating on titanium surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Nasir, Laila Masrur (2012) High speed nickel electroplating on aluminium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Sa'at, Jasmi (2012) Parameter setting through optimization of variable cooling channels which effect to the injection moulding product quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Said, Mohd. Nur Syakirin (2012) Work improvement at an automotive supplier manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Saleh, Muhammad Shafif (2012) Configuration of synthetic mooring for two side by side FPSO tanker in shallow water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Shaffiar, Norhashimah (2012) Integration of damage-based models for fatigue of solder interconnects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Zaidan, Nurhanna (2012) Gel cast of ceramic membrane for water filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokhtar, Iqbal (2012) Mechanical and in-vitro analysis of basalt/high density polyethylene composite for upper extremity joint application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moradi, Razieh (2012) Performance analysis of reinforced stone columns based on finite element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moradifard, Hossein (2012) Improving the system performance of a two-link robotic arm actuated by Pneumatic Actuator Muscle (PAM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mozafari, Hamid (2012) Finite element investigation of transmission conditions for thin interphases. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mubarak Habiballah, Thagip Tarig (2012) Thermal effect in pressure fluctuation : internal flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustadza, Ameirul Azraie (2012) Harnessing energy from micro vibration using smart materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Najm, Layla Suhail (2012) Effect of inhibitors on the corrosion behaviour of carbon steel in aqueous environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Ismail, Nik Mohd. Khairuddin (2012) Investigation of motion and wave induced forced on semi-submersible in regular wave. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Omar, Nang Jamilah (2012) Life cycle cost of pumping stations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nikakhtar, Amin (2012) Construction process improvement through the application of lean production principles via computer simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Oktaviandri, Muchamad (2012) A decision support tool for dynamic job shop scheduling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osman, Saliza Azlina (2012) Interfacial reactions between tin-silver-copper lead-free solders and nickel (P)/palladium/gold and nickel (B)/palladium/gold surface finishes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Phuman Singh, Amrik Sing (2012) Identification of vehicle rollover conditions and active roll control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Putra Cupu, Dedi Rosa (2012) Numerical analysis of elastohydrodynamic lubrication with bio-based fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahmandoust, Moones (2012) Computational mechanics modelling of carbon nanotube-based nanocomposites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rajo Mantari, Muhammad Hanafi Asril (2012) Experimental investigation of spray characteristics for palm olein blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Razzaghian, Mohammad (2012) Simulation of natural convection in open ended enclosures by lattice boltzmann method SRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rupani, Mohammad Mobin (2012) Supplier selection based on fuzzy dematel and fuzzy topsis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rusli, Ahmad Najmie (2012) The effect of omega shape and kinked keel on resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saba, Tanzila (2012) Offline cursive touched script non-linear segmentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabzehmeidani, Yaser (2012) Mechatronic development of an in-pipe microrobot with intelligent active force control. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadeghipour, Sakineh (2012) Performance evaluation of solar air heaters with single and double passess. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safdari, Arman (2012) Simulation particle motion in incompressible three dimensional cavity flow by Lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said Mohamed, Mohamed Ahmed (2012) Park visitation characteristic in Khartoum, Sudan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salehirad, Saber (2012) Study of NOx emission in flameless combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salema, Arshad Adam (2012) Pyrolysis of oil palm biomass using microwave induced system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samat, Khairul Fadzli (2012) Design and development of rehabilitation device for hemiparetic patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sanusi, Nurulhanis Ahmad (2012) Purification of wild type fibrinolytic enzyme from Bacillus SP. isolated from fermented food. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shahsavari, Rouzbeh (2012) Multi-objective optimization using differential evolution for dynamic model structure selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamohammadi, Mehdi (2012) Determination of influencing factors on service system improvement using AHP and QFD tools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shanan, Essam Jassim (2012) Partial transient liquid phase diffusion bonding of stainless steel (SS304) and metal matrix composite (AL/MG2SI) by using aluiminium interlayer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirazifard, Shahin Hamtaiepour (2012) Evaluating the effect of pretreatment parameters on cobalt chromium molybdenum alloy prior to PVD coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirdar, Mostafa Rezazadeh (2012) Effect of pretreatment parameters on surface roughness and cobalt removal of tungsten carbide before diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sim, Jia Siang (2012) Evaluation of impressed current cathodic protection for underground pipeline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suhaimi, Mohd. Azlan (2012) Generic mathematical representation for a machining tool path. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Taheri, Behrooz (2012) Absorption chiller-design and optimization of absorber and regenerator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tang, Ying Ying (2012) A mathematical human resource planning model for a third party logistics company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tohidi, Seyedahmad (2012) Absorption chiller- design and optimization of generator and condenser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tuan Abdul Rahman, Tuan Ahmad Zahidi (2012) Active force vibration control of a flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tuan Kamaruddin, Tengku Nordayana Akma (2012) Self tuning PID controller for idle speed control internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vaghefinzhad, Sayedmohammadreza (2012) A genetic algorithm approach for solving group technology problem with multiple process routes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vatani, Ashkan (2012) Turbulent nanofluid flow over peiodic grooved channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vilavandran, Alfred Sagayam (2012) Numerical solution of convective heat transfer in a polar cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wakhi Anuar, Nur Farah Bazilah (2012) The effect of forging temperature on the properties of biodegradable MG-0.7CA alloy for implant application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Yng Jeng (2012) Road maintenance management system using geographic information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yahaya, Nurulain (2012) Flow behaviour around winglets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zainal, Nurul Amira (2012) Numerical simulation of fluids structure interaction (FSI) in asymmetric abdominal aortic aneurysm (AAA) using adina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Mohamad Shukri (2012) Modeling of liquefied natural gas (LNG) evaporation during marine transportation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zeinahvazi, Milad (2012) Determination of levels of automation compatible to training of workers in manufacturing industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zeinali, Mohammadjavad (2012) Intelligent robust controller for semi active suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.