Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Mechanical Engineering" and Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | V | W | Y | Z
Number of items: 468.

A

Aarabi, Majid and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Azadnia, Amir Hossein and Zakuan, Norhayati (2012) A comparative study on critical success factors (CSFS) of ERP systems implementation among SMEs and large firms in developing countries. International Journal of Advancements in Computing Technology, 4 (9). pp. 226-239. ISSN 2005-80399 (Print); 2233-9337 (Electronics)

Abd. Al-Rahman, Lamyaa and Raja, Raja Ishak and Abdul Rahman, Roslan (2012) Attenuation of noise by using absorption materials and barriers: a review. International Journal of Engineering & Technology, 2 (7). pp. 1207-1217. ISSN 2049-3444

Abd. AL-Rahman, Lamyaa and Raja Hamzah, Raja Ishak and Abdul Rahman, Roslan and Ibrahim, Zawawi (2012) Acoustic properties of innovative material from date palm fibre. American Journal of Applied Sciences, 9 (9). pp. 1390-1395. ISSN 1546-9239 (Print); 1554-3641 (Electronic)

Abd. Gapar, Mohd. Syamsul Bahtiar (2012) Comparative study of mechanical properties for FRP material of different classification society. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Kader, Ab. Saman (2012) Optimising expansion control on quay crane deployment in container termal. In: 8th International Conference On Marine Technology (MARTEC 2012), 20-22 October, 2012, Kuala Terengganu, Malaysia.

Abd. Kader, Ab. Saman and Abdul Malik, Adi Maimun and Abdul Ghani, Muhamad Pauzi (2012) Risk and reliability analysis study of offshore aquaculture ocean plantation system. In: 8th International Conference on Marine Technology 2012(MARTEC), 20-22 October, 2012, Terengganu, Malaysia.

Abd. Kader, Ab. Saman and Wan Shamsuri, Wan Nurulhuda (2012) Optimising efficiency in cargo-handling operation in port. In: APEX 2012 - Optimizing Efficiency In Cargo Handling Operation In Port, Nov.6 - Nov.7, 2012, Kuala Lumpur, Malaysia.

Abd. Malek, Zain Ashraf (2012) Contaminant removal from rectangular shaped pipeline joints using constrained interpolated profile method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdalla Elsanusi, Omer Salih (2012) Design and simulation of a solar powered absorption refrigerator for small units. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdol Azis, Mohd Hazmil Syahidy (2012) Numerical modeling of hemodynamics in abdominal aortic aneurysm using immersed boundary method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdol Rahman, Mohd. Nasrull and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri (2012) Psychometric properties of the workplace ergonomic risk assessment (WERA) method. In: 2nd International Conference Southeast Asian Network of Ergonomics Societies (SEANES'12), 9-13 July, 2012, Langkawi, Malaysia. (In Press)

Abdolahi, Ahmad and Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2012) Synthesis of uniform polyaniline nanofibers through interfacial polymerization. Materials, 5 (8). pp. 1487-1494. ISSN 1996-1944

Abdul Aziz, Abdul Hadi (2012) Structure and tribological properties of post-sputtered annealing nickel titanium alloy coatings onto 316l stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azhar (2012) R22 and various mixtures of R2901R600a as its alternative in adiabatic capillary tube used in split-type air-conditioning system. In: The 5th International Meeting on Advances in Thermo-Fluids (IMAT), Bintan Island, Indonesia, 2012.

Abdul Aziz, Azhar (2012) Simulation of alternative refri gerant characteristics using artificial neural network in air-conditioning system. In: 3rd International Conference on Construction Industry (ICCI) 2012, 10-11 April, 2012, Sumatera Barat, Indonesia.

Abdul Ghani, Mohamad Pauzi (2012) A definite integral solution of ship wave resistance for twin-hull ships. In: World Maritime Technology Conference (WMTC2012), 2012.

Abdul Ghani, Mohamad Pauzi (2012) Experimental analysis of podded propulsor on Multi Purpose Command Support Ship (MPCSS). In: 10th International Conference on Hydrodynamics (ICHD 2012), 2012.

Abdul Ghani, Mohamad Pauzi and Ismail, Nasrudin (2012) Riser VIV suppression device test. In: 6th Asia Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3-5 September, 2012, Johor, Malaysia.

Abdul Hamid, Mohd. Kameil (2012) Effects of external hard particles on brake noise of disc braking system. In: The 5th International Meeting on Advances in Thermofluids 2012, 12-13 November 2012, Island of Bintan, Indonesia.

Abdul Hamid, Mohd. Kameil and Stachowiak, G. W. and Samion, Syahrullail (2012) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 905-913. ISBN 978-073541032-9

Abdul Kader, Ab Saman (2012) Optimising expansion control on quay crane development in container terminal. In: International Conference On Marine Technology (MARTEC 2012), 2012.

Abdul Latif, Ainullotfi and Ayob, Amran and Kamsah, Nazri and Ahmad, Zaini and Tamin, Mohd. Nasir (2012) Finite element modeling of sheet metal forming process. In: International Conference on Applications and Design in Mechanical Engineering 2012, 27-28 February 2012, Penang, Malaysia.

Abdul Latiff, Zulkarnain (2012) Experimental study on the replacement of HFC-R134a by hydrocarbons in automotive air conditioner. In: The 5th IMAT International on Advances in Thermo-fluids, 2012.

Abdul Malik, Adi Maimun (2012) Assessment of bank effect in restricted water using computational fluid dynamics. In: Proceedings of Martec 2012, 2012.

Abdul Malik, Adi Maimun (2012) Bow diving of semi-swath vessel in following seas and fins stabilizer effect. In: Proceedings of the 11th International Conference on the Stability of Ships and Ocean Vehicles 23-28 September 2012, Athens, Greece, 2012.

Abdul Malik, Adi Maimun (2012) Establishment of ship collision avoidance in the Malacca Straits based on AIS data. In: JASNAOE Autumn Conference 2012, 26-27 November 2012, Kashiwa Japan.

Abdul Malik, Adi Maimun (2012) Safety measure and cost benefit assessment for ship collision in the Malacca straits using AIS data. In: JASNAOE Spring Conference 2012, 17-18 May , 2012, Tokyo.

Abdul Malik, Adi Maimun and Ahmed Abdel Razak, Mohamed Yasser (2012) Take off resistance estimation of Wing In Ground Effect (WIG) craft. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3-5 September, 2012, Johor Bahru, Malaysia.

Abdul Malik, Adi Maimun and Ahmed Abdel Razak, Yasser Mohamed (2012) Fundamentals of vortex induced vibration analysis of merine riser. In: The 6 th Asia - Pacific Workshop on Marine Hydrodymics - APHydro 2012, 3-5 September 2012, Johor, Malaysia.

Abdul Malik, Adi Maimun and Jaswar, Jaswar and Abdul Ghani, Muhamad Pauzi (2012) Semi submersible mesh number effect on time required and accuracy of motion. In: Proceedings 8th International Conference on Marine Technology (MARTEC 2012), 20-22 October, 2012, Terengganu, Malaysia.

Abdul Malik, Adi Maimun and Jaswar, Jaswar and Abdul Ghani, Mohamad Pauzi (2012) Effect of mesh number on accuracy of semi submersible motion prediction. In: 6th Asia Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3rd - 4th September 2012, Johor, Malaysia.

Abdul Malik, Samir Sani (2012) Effect of zinc addition on the properties of magnesium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Abd Rahman (2012) An overview of fruit supply chain in Malaysia. In: First International Conference on Engineering Business Management Proceedings, 2012.

Abdul Rahim, Abdul Rahman (2012) Towards successful Total Productive Maintenance (TPM): how well the management commitment being assessesed? In: International Conference On Management, Economics And Finance (ICMEF 2012) Proceeding , 2012.

Abdul Rani, Mat Rebi (2012) WERA tool for assessing exposure risk factors of work related musculoskeletal disorders. a reliability and validity study. In: 3rd International Conference on Industrial Engineering & Operations Management, 2012.

Abdul Rasih, Radzi (2012) Solar absoprtion thermal energy storage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Wahid, Mazlan (2012) Environmental protection and fuel comsumption reduction by flameless combustion technology: a review. In: 12-13 November 2012 :5th International Meeting on Advances on Thermofluids, Bintan Island, Indonesia, 2012.

Abdul Wahid, Mazlan (2012) Pulse detonation engine research development at high speed reacting flow laboratory, Universiti Teknologi Malaysia. In: 12-13 November 2012 :5th International Meeting on Advances on Thermofluids, Bintan Island, Indonesia, 2012.

Abdul Wahid, Mazlan and Ahmad Faiz, M. Z. and Saqr, Khalid M. (2012) Direct thrust force measurement of pulse detonation engine. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Melville, New York, pp. 1257-1263. ISBN 978-073541032-9

Abdul Wahid, Mazlan and Ujir, Haffis (2012) Reacting shock waves characteristics for biogas compared to other gaseous fuel. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 90-99. ISBN 978-073541032-9

Abdullah, H. B. and Kamsah, Nazri (2012) Stability of cementless hole and non-hole hip prosthesis. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 33-37. ISBN 978-145771989-9

Abdullah, Haslina (2012) The effect of geometry of prosthesis on the stability of hip joint arthroplasty using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Mohamed Ruslan and Cantwell, Wesley J. (2012) The high-velocity impact response of thermoplastic-matrix fibre-metal laminates. Journal of Strain Analysis for Engineering Design, 47 (7). pp. 432-443. ISSN 0309-3247 (Print); 2041-3130 (Electronic)

Abdullah, Mohd. Yunus (2012) Intelligent active force controller for an anti-lock brake system application. In: Proceeding of the 1st International Conference on Systems, Control, Power, Robotics (SCOPORO'12) Singapore, May 11-13, 2012 , 2012.

Abdullah, Muhamad Adlan and Salema, Arshad and Ani, Farid Nasir (2012) Deposit forming tendency of biodiesel and diesel fuel due tohigh pressure exposure. In: 5th International Meeting on Advances in Thermofluids (IMAT) 2012, 12 – 13 November 2012, Bintan Island, Indonesia.

Abdullah, Redzuan (2012) Modelling of shear bond with cohesive element and slenderness study of composite slabs. In: Asia Pacific Structural Engineering and Construction Conference (APSEC 2012), 2012.

Abdullah Al-Muhandes, Mohammed Ali (2012) Oil fate and slick trajectory prediction for marine oil pollution control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, Abdul Rahim and Zainudin, Muhammad Amir (2012) Preventing disc brake squeal using a thin plate shim. International Journal of Vehicle Structures and Systems, 4 (1). pp. 23-27. ISSN 0975-3060 (Print); 0975-3540 (Electronic)

Abu Bakar, Saiful Anuar and Masuda , Ryosuke and Hashimoto , Hiromu and Inaba, Takeshi and Jamaluddin, Hishamuddin and Abdul Rahman, Roslan and Mohd. Samin, Pakharuddin (2012) Active suspension system in improving ride and handling performance of electric vehicle conversion. International Journal of Electric and Hybrid Vehicles, 4 (1). pp. 24-53. ISSN 1751-4088

Abu Bakar, Tuty Asma (2012) Effect of annealing treatment on the wear properties of NI rich NITI alloy coatings. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Abu Bakar, Tuty Asma (2012) Effect of submerged arc welding parameters on the abrasive wear resistance of lincore 60-o hardfacing materials. In: International Science Postgraduate Conference 2012, 2012.

Abu Bakar, Tuty Asma and Hamzah, Esah (2012) Influence of alloying elements on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys. In: 8th International Materials Technology Conference and Exhibition 2012, 9 - 12 July , Kuala Lumpur, Malaysia.

Abubakar, Zubairu (2012) Microwave assisted pyrolysis of oil palm shell (OPS) biomas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Adham, A. M. and Mohd Ghazali, Normah and Ahmad, Robiah (2012) Thermal performance of ammonia-cooled micro channel heat sink. International Review of Mechanical Engineering, 6 (4). pp. 828-836. ISSN 1970-8734

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Rabiah (2012) Optimization of an ammonia-cooled rectangular microchannel heat sink using multi-objective non-dominated sorting genetic algorithm (NSGA2). Heat and Mass Transfer, 58 (10). pp. 1723-1733. ISSN 0947-7411(Print); 1432-1181(Electronic)

Adham, Ahmed Mohammed and Mohd. Ghazali, Normah and Ahmad, Robiah (2012) Cooling of a rectangular microchannel heat sink with ammonia gas. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 57-64. ISBN 978-073541032-9

Adnan, Faizul Amri (2012) Field measurement of fishing boats generated waves. In: 6th Asia Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Adnan, Faizul Amri (2012) Hydrodynamic interaction between two ships advancing in close proximity in waves. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics-APHydro 2012, 2012.

Adnan, Faizul Amri (2012) On the service performance of LNG carriers in actual seas. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics- APHydro 2012, 2012.

Afifi Huspi, Hishammudin (2012) Pulse detonation engine performance and thrust improvement using ejector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Arshad (2012) Framework of accident modeling in chemical process industries. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Ahmad, Arshad (2012) Modeling and simulation of heat exchanger using multilevel flow modeling. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT2012), 2012.

Ahmad, Arshad (2012) Using pictorial work instructions: reducing motion variation in process. In: International Conference in Advanced Manufacturing and Materials Engineering (ICAMME’2012), 2012.

Ahmad, Mohd. Zamani (2012) Ethnographic based generic design model of traditional Malaysian fishing boats. In: International Conference On Marine Technology (MARTEC 2012), 20-22 October 2014, Terangganu, Malaysia.

Ahmad, Mohd. Zamani (2012) Fuzzy performance profiling of propulsion plant for medium size vessel. In: International Conference On Marine Technology (MARTEC 2012), 2012.

Ahmad, Mohd. Zamani (2012) Large offshore remote system for Malaysian deep sea fishing. In: International Conference On Marine Technology (MARTEC 2012), 2012.

Ahmad, Mohd. Zamani (2012) Practical issues on the implementation of ballast free system. In: The 6th Asia-Pacific Workshop on Marine Hydrodymics-APHydro2012, 2012.

Ahmad, Norhayati (2012) Comparison between two models of engineering students’ intellectual development. In: The International Conference on Teaching & Learning in Higher Education (ICTLHE 2012) in conjunction with 4th Regional Conference on Engineering Education and Research in Higher Education (RCEE 2012 & RHEd 2012)., 2012.

Ahmad, Norhayati (2012) Measuring the strain, nancrystalline size and distribution of mesoporous silica nanoparticles-aluminium loaded by x-ray diffravtion method. In: Nanomaterials Technology Specialised conference 2012, 2012.

Ahmad, Norhayati (2012) Study on fabrication of ceramic membrane for water filtration. In: 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July, 2012, Selangor, Malaysia.

Ahmad, Norhayati and Mohd. Zaidan, Nurhanna (2012) Effect of sintering temperatire on membrane properties of Sayong ball clay. In: 3rd International Conference on Mechanical & Manufacturing Engineering 2012 (ICME 2012), 20-21 November 2012, Batu Pahat, Johor, Malaysia.

Ahmad, Norhayati and Ourdjini, Ali and Hamzah , Haizad and Nordin, Norazhar (2012) Effect of carbon content on the microstructure and strength of drawn steel wire rope. In: 21st Scientific Conference of the Microscopy Society Malaysia (MSM), 22-24 November 2012, Kota Bharu, Kelantan .

Ahmad Shafie, Noor Emilia (2012) Development of an atmospheric combustor test rig for firing envodiesel blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Shafie, Noor Emilia (2012) Development of an atmospheric combustor test rig for firing envodiesel blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmadianchashmi, Rouzbeh (2012) Evaluation of end milling titanium alloy Ti-6A1-4V using finite element method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmed, H. E. and Mohammed, Hussein A. and Yusoff, M. Z. (2012) An overview on heat transfer augmentation using vortex generators and nanofluids: approaches and applications. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5951-5993. ISSN 1364-0321

Ahmed Abdel Razak, Yasser Mohamed and Yaakob, Omar (2012) Studying the hydrodynamic characteristics of sprint master canoe. In: International Conference on Applications and Design in Mechanical Engineering (ICADME 2012), 27-28 Febuary, 2012, Penang, Malaysia.

Ahmed Abdel Razak, Yasser Mohamed (2012) Fundamentals of vortex induced vibration analysis of marine riser. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Numerical simulation of free surface effect on wave interference of catamaran with fin stabilizer. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Numerical simulation of propeller hydrodynamic performance of LNG carrier in open water using fluent. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Production process of traditional ships in Kepulauan Riau-Indonesia. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 2012.

Ahmed Abdel Razak, Yasser Mohamed (2012) Review of research on deepwater steel catenary risers. In: International Conference on Marine Technology (MARTEC 2012), 20-22 October, 2012, Terengganu, Malaysia.

Ahmed Eldrainy, Yehia Abd. Elmonem (2012) Enhancement of palm oil blends atomization and spray using swirling flow. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aladpoosh, Hamid (2012) The effectiveness of project management by stakeholders in enhancing project and stakeholder management. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Jalil and Amiri, I. S. and Vahedi, G. R. and Shojaei, A. A. and Nikoukar, A. and Yupapin, P. P. (2012) Secured transportation of quantum codes using integrated PANDA-add/drop and TDMA systems. International Journal of Engineering Research & Technology (IJERT), 1 (5). pp. 1-5. ISSN 2278-0181

Ali, Mohamed A. H. and Mailah, Musa and Tang, Howe Hing (2012) Path navigation for mobile robot in a road roundabout setting. In: Proceedings of 1st International Conference on Systems, Control, Power, Robotics (SCOPORO'12), 11-13 May, 2012, Singapore.

Ali Akbari , Sheldareh (2012) Kinematic behavior of solid particles in enclosed lid-driven cavity using CIP method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Beik, Amir Mohammad (2012) High temperature behaviour of NiCoCrAIY coated on Ni-based superalloy with ain and aion diffusion barriers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar (2012) Homogenous charge compression ignition (HCCI) technique: a review for application in two-stroke gasoline engines. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 53-57. ISBN 978-303785413-6

Ani, Farid Nasir (2012) The effects of diesel fuel exposure to high pressure common rail system on its deposit forming tendency. In: SEATUC 2012, 6-7 March, 2012, Bangkok, Thailand.

Ani, Farid Nasir and Lim, Xin Yi (2012) The spray combustion of palm olein and diesel fuel blends. Jurnal Mekanikal (34). pp. 47-56. ISSN 0127-3396

Ani, Farid Nasir and Mat Nor, Nor Syarizan (2012) Microwave induced fast pyrolysis of scrap rubber tires. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 834-841. ISBN 978-073541032-9

Ani, Farid Nasir and Salema, Arshad Adam (2012) Pyrolysis of oil palm empty fruit bunch biomass pellets using multimode microwave irradiation. Bioresource Technology, 125 . pp. 102-107. ISSN 0960-8524

Anjomshoae, Ali (2012) Assessment of musculoskeletal disorder and its association with psychosocial work factors among the bus drivers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arbabzadeh, Iman (2012) 3D modeling of orthogonal cutting on AISI 1045. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ardani, Mohd. Ibthisham (2012) Heat distribution study on turbocharger turbine volute. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arjmandi, Mohammadreza (2012) Damage evolution in carbon fiber-reinforced polymer (CFRP) composites under shear fatigue loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Arsad, S.S and Noh, S. N. S. S. and Ayob, Amran and Ahmad, Zaini and Abdul Latif, Ainullotfi and Kamsah, Nazri and Tamin, Mohd. Nasir (2012) Deformation response of steel sheet metal under transverse impact loading. International Review of Mechanical Engineering, 6 (3). pp. 680-684. ISSN 1970-8734

Asril Saadun, Mohd. Noor (2012) Numerical analysis on the effects of cavity geometry with heat towards contaminant removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Assadian, Mahtab (2012) The effect of surface treatment and electrophretic deposition on corrosion of biomaterials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ayob, Amran (2012) Effect of thickness of layers on displacements and stresses in laminated gfrp cylinder subjected to radial load. In: 2nd International Conference on Key Engineering Materials (ICKEM, 2012), 26-28 February 2012, Singapore .

Azaryoon, Arash (2012) Knowledge-based system for non-conventional machining processes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azizan, Muhammad Akmal (2012) Vortex induced vibration on stationary cyclinder using CFD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Azmi, Muhammad (2012) Framework for end-of-life vehicle recycling system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Bakar, Muhammad Aliuddin (2012) Modelling, identification and control of shape memory alloy actuator using intelligence system identification technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Balaji, R. and Yaakob, Omar (2012) An analysis of shipboard waste heat availability for ballast water treatment. Journal of Marine Engineering And Technology, 11 (2). pp. 15-29. ISSN 1476-1548

Banitalebi, Akbar and Abd. Aziz, Mohd. Ismail and Ahmad, Rohanin (2012) A hybrid optimization method for constrained optimal control problem. IOSR Journal of Mathematics, 1 (2). pp. 38-41. ISSN 2278-5728

Barzani, Mohsen Marani (2012) Effect of silicon morphology on various machinability parameters when turning A1-Si-Cu-Mg alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bengsoon, Matthias Edric and Abu Bakar, Abdul Rahim and Abdul Hamid, Mohd. Kameil (2012) Structural modification of disc brake judder using finite element analysis. In: Applied Mechanics and Materials. Trans Tech Publications, Zurich, Switzerland, pp. 68-72. ISBN 978-303785413-6

Bhupal Kumar, Seekayapatteda (2012) Properties of gravity die casting of magnesium and aluminium alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bodaghi, Behrooz (2012) A binary integer programming model for multi-resource leveling problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Borhana, A. A. and Mohamad, A. T. and Abdul Latif, A. and Ahmad, Zaini and Ayob, A. and Tamin, Mohd. Nasir (2012) Ductile failure prediction of spot welded lap joint. Applied Mechanics and Materials, 165 . pp. 285-289. ISSN 1660-9336

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) The effect of unburned gas axial velocity on the characteristics of rotational flame during flashback. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1285-1291. ISBN 978-073541032-9

Bufares, Ahmed M. and Abdul Wahid, Mazlan (2012) Flashback of laminar premixed flame in rotating burner. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1292-1299. ISBN 978-073541032-9

Burhaumudin, Mohammad Safwan and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd Rahman, Roslan and Sulaiman, Syabillah (2012) Integration of magic formula tire model with vehicle handling model. International Journal of Research in Engineering and Technology, 1 (3). pp. 139-145. ISSN 2277-4378

C

Che Kob, Mohd. Salman (2012) A proportional derivative control of an electro-mechanical friction clutch for an electro-mechanical dual acting pulley continuously variable transmission applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Sidek, Nor Azwadi and Abdul Munir, Fudhail (2012) Lattice Boltzmann numerical prediction of fluid flow in various shapes of shear driven cavity. International Review of Mechanical Engineering, 6 (3). pp. 565-573. ISSN 1970-8734

Che Sidek, Nor Azwadi and Goh, C. K. and Afiq Witri, M. Y. (2012) Computational analysis of heat flow in computer casing. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 199-208. ISBN 978-073541032-9

Che Sidek, Nor Azwadi and Salehi, Mehran and Witri, Afiq (2012) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, New York, pp. 650-658. ISBN 978-073541032-9

Che Sidik, Nor Azwadi (2012) Simulation of mixed convection around a square by using LBM. In: 2012 4th International Conference on Mechanical and Electrical Technology ICMET 2012, 24-26 July, 2012, Kuala Lumpur, Malaysia.

Che Sidik, Nor Azwadi (2012) Thermodynamic analysis of flow field at the end of combustor simulator. In: Aerotech Iv 2012 : Aerotech Iv: Conference on Recent Advances in Aerospace Technology, 21-22 November, 2012, Kuala lumpur, Malaysia.

Che Sidik, Nor Azwadi and Abdul Munir, Fudhail (2012) Mesoscale numerical prediction of fluid flow in a shear driven cavity. Arabian Journal for Science and Engineering, 37 (6). pp. 1723-1735. ISSN 1319-8025

Che Sidik, Nor Azwadi and Afiq Witrib, M. Y. (2012) Simulation of multicomponent multiphase flow using lattice Boltzmann method. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1025-1039. ISBN 978-073541032-9

Che Sidik, Nor Azwadi and Izual, N. I. N. (2012) Numerical investigation of fluid and thermal flow in a differentially heated side enclosure walls at various inclination angles. CMES - Computer Modeling in Engineering and Sciences, 84 (6). pp. 559-574. ISSN 1526-1492 (Print); 1526-1506 (Electronic)

Che Sidik, Nor Azwadi and Masoud, Godarzi (2012) Solution to natural convection heat transfer by two different approaches: navier stokes and lattice Boltzmann. International Review of Mechanical Engineering, 6 (4). pp. 705-711. ISSN 1970-8734

Che Sidik, Nor Azwadi and Mat Sahat, Idris (2012) Finite difference and cubic interpolated profile lattice boltzmann method for prediction of two-dimensional lid-driven shallow cavity flow. Arabian Journal for Science and Engineering, 37 (4). pp. 1101-1110. ISSN 1319-8025 (Print); 2191-4281 (Electronics)

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Eulerian-lagrangian numerical scheme for contaminant removal from cavity in horizontal channel. Advanced Science Engineering and Medicine, 4 (5). pp. 432-437. ISSN 2164-6627 (Print) ; 2164-6635 (Electronic)

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Numerical prediction of mixed convection heat transfer in an enclosure. International Review on Modelling and Simulations, 5 (3). pp. 1339-1343. ISSN 1974-9821

Che Sidik, Nor Azwadi and Salehi, Mehran (2012) Numerical simulation of flow over semicircular cavity. International Review on Modelling and Simulations, 5 (3). pp. 1335-1338. ISSN 1974-9821

Che Sidik, Nor Azwadi and Shukri, Z. Mohamad and Afiq Witri, M. Y. (2012) Numerical investigation of 2D lid driven cavity using smoothed particle hydrodynamics (SPH) method. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 789-798. ISBN 978-073541032-9

Christoph , Veyhl and Thomas, Fiedler and Tobias, Herzig and Andreas, Öchsner and Timo, Bernthaler and Irina, V. Belova and Graeme, E. Murch (2012) Thermal conductivity computations of sintered hollow sphere structures. Metals, 2 . pp. 113-121. ISSN 2075-4701

Cossa, Nelson J. and Potty, Narayanan S. and Idrus, Arazi B. and Abdul Hamid, Mohd. Foad and Nizamani, Zafarullah (2012) Reliability analysis of jacket platforms in Malaysia-environmental load factors. Research Journal of Applied Sciences, Engineering and Technology, 4 (19). pp. 3544-3551. ISSN 2040-7459

D

da Silva, Lucas F. M. and Ochsner, Andreas and Adams, Robert D. (2012) Guest Editorial. International Journal of Adhesion and Adhesives, 37 . pp. 1-2. ISSN 0143-7496

da Silva, Lucas F. M. and Ochsner, Andreas and Adams, Robert D. (2012) Guest Editorial. Journal of Adhesion, 88 (4-6). pp. 277-281. ISSN 0021-8464 (Print); 1545-5823 (Electronics)

Da Silva, Lucas F. M. and Oechsner, Andreas and Adams, Robert D. (2012) Special Issue: papers from the 1st International Conference on structural adhesive bonding (AB2011), Porto, Portugal, 7-8 July 2011. Journal Of Adhesion, 88 (4-6). pp. 277-281. ISSN 0021-8464

Da Silva, Lucas F. M. and Öchsner, Andreas and Adams, Robert D. (2012) Special issue: special issue on joint design 3. International Journal of Adhesion and Adhesives, 37 . pp. 1-2. ISSN 0143-7496

Dahalan, Md. Nizam and Mansor, Shuhaimi and Shaharudin, Muhammad Haniff and Ali, Airi (2012) Evaluation of synthetic jet actuators design performance. Aircraft Engineering and Aerospace Technology, 86 (4). 390 -397. ISSN 0002-2667

Dargi, Ahmad (2012) Developing a framework to improve the supplier selection process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Daroonparvar, Mohammadreza and Hussain, Mohammad Sakhawat and Mat Yajid, Muhammad Azizi (2012) The role of formation of continues thermally grown oxide layer on the nanostructured NiCrAlY bond coat during thermal exposure in air. Applied Surface Science, 261 . pp. 287-297. ISSN 0169-4332

Daud, Mohd. Fadzil and Mohd. Taib, Jamaluddin and Shariffudin, Rio Sumarni (2012) Assessing mechanical engineering undergraduates’ conceptual knowledge in three dimensional computer aided design (3D CAD). Procedia - Social and Behavioral Sciences, 56 . pp. 1-11. ISSN 1877-0428

Davoudinejad, Ali (2012) Performance evaluation of different edge geometry when turning hardened DF3 tool steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Deirram, Nayeleh and Rahmat, Abdul Razak and Rashidi, Saba and Ghanbari1, Taravat and Moradpour, Mona (2012) Hydrolysis degradation of polycarbonate under microwave irradiation by using design of experiment software. Scientific Research and Essays, 7 (40). pp. 3399-3405. ISSN 1992-2248

E

Em, Poh Ping and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2012) Hardware-in-the-loop simulation of automatic steering control for double lane change and sine steer manoeuvres. International Journal of Vehicle Autonomous Systems, 10 (1-2). pp. 67-104. ISSN 1471-0226 (Print); 1741-5306 (Electronics)

F

Fadil, Nor Akmal and Govindachetty, Saravanan and Yoshikawa, Hideki and Yamashita, Yoshiyuki and Ueda, Shigenori and Kobayashi, Keisuke and Tanabe, Toyokazu and Hara, Toru and Gubbala, Venkata Ramesh and Murakami, Hideyuki and Noda, Kazuhiko and Abe, Hideki (2012) Wet chemical synthesis of ni-al nanoparticles at ambient condition. Advanced Materials Research, 557-59 . pp. 442-447. ISSN 1022-6680

Farahany, S. and Ourdjini, Ali and Idris, Mohd. Hasbullah (2012) The usage of computer-aided cooling curve thermal analysis to optimise eutectic refiner and modifier in Al-Si alloys. Journal of Thermal Analysis and Calorimetry, 109 (1). pp. 105-111. ISSN 1388-6150 (Print); 1572-8943 (Electronic)

Farahany, Saeed (2012) Evaluation of the effect of additives and their interactions on silicon morphology of aluminium-silicon-copper-magnesium cast alloy by thermal analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Farid, Ali Akhavan (2012) High speed drilling of A1-Si (A383) alloy using carbide tools. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Firouzabadi, Farzin (2012) Dynamic response of the pressurized laminated composite cylindrical shell subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G

Galankashi, Masoud Rahiminezhad (2012) Assessment of supply chain strategies and factors affecting selection of suppliers for electrical companies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghasemzadehfahani, Siamak (2012) Disinfection of particle-associated viruses by ultraviolet. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghavamian, Ali and Ochsner, Andreas (2012) Numerical investigation on the influence of defects on the buckling behavior of single-and multi-walled carbon nanotubes. Physica E: Low-Dimensional Systems and Nanostructures, 46 . pp. 241-249. ISSN 1386-9477

Ghazali, Hanipah (2012) Work improvement at an electronic company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazali, Nur Syazwani (2012) Routing optimization using Chinese Postman Problem for waste collection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghazanfari, Seyed Alireza (2012) Simulation of hydrodynamic coefficient of AUV during maneuvering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghosh, Debasish and Ghosh, Pradip and Yusop, Mohd. Zamri and Tanemura, Masaki and Hayashi, Yasuhiko and Tsuchiya, Tetsuo and Nakajima, Tomohiko (2012) Transparent and flexible field emission display device based on single-walled carbon nanotubes. Physica Status Solidi-Rapid Research Letters, 6 (7). pp. 303-305. ISSN 1862-6254

Gohari, Mohammad and Abd. Rahman, Roslan and Raja Hamzah, Raja Ishak and Tahmasebi , Mona (2012) Bus seat suspension modification for pregnant women. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 404-407. ISBN 978-145771989-9

Golshan, Abolfazl and Gohari, Soheil and Ayob, Amran (2012) Multi-objective optimisation of electrical discharge machining of metal matrix composite Al/SiC using non-dominated sorting genetic algorithm. International Journal of Mechatronics and Manufacturing Systems, 5 (5-6). pp. 385-398. ISSN 1753-1039

Golshokouh, I. and Wira, J. Y. and Ani, Farid Nasir and Syahrullail, Samion (2012) Palm fatty acid distillate as an alternative source for hydraulic oil. In: 3rd International Conference on Mechanical and Manufacturing Engineering 2012, 20-21 November, 2012, Malaysia.

Golshokouh, Iman and Ani, Farid Nasir and Samion, Syahrullail (2012) Wear resistance evaluation of palm fatty acid distillate using four-ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 928-935. ISBN 978-073541032-9

H

H. Sait, Hani and Hussain, Ahmad and Adam Salema, Arshad and Ani, Farid Nasir (2012) Pyrolysis and combustion kinetics of date palm biomass using thermogravimetric analysis. Bioresource Technology, 118 . pp. 382-389. ISSN 0960-8524

Hadzri, Edi Azali and Shamsudin, Amir Hamzah and Osman, Kahar and Abdul Kadir, Mohammed Rafiq and Abdul Aziz, Azian (2012) Effects of irregular cerebrospinal fluid production rate in human brain ventricular system. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 659-664. ISBN 978-073541032-9

Haghighati, Razieh (2012) Modeling flow of crowd during tawaf at Masjid Al-Haram. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Esah (2012) Effect of ageing treatment on the microstructures of Ti-50.7at.%Ni shape memory alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Hamzah, Esah (2012) The effects of quenching media on the microstructures and properties of Cu-Al-Ni shape memory alloys. In: The 21st Scientific Conference of the Microscopy Society of Malaysia, 21 November, 2012, Kelantan, Malaysia.

Hamzah, Esah (2012) Efffect of surface pretreatment on nanocrystalline diamond ballas morphology. In: Invited Paper : Nanomaterials Technology Specialised Conference 2012, AMTEC -UTM, 6-7 March 2012, 2012.

Hamzah, Esah (2012) Facile synthesis of polyaniline-silver composites through interfacial polymerization. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9th to 12th July 2012, Kuala Lumpur, Malaysia.

Hamzah, Esah (2012) Formation of titanium oxide by thermal-electrochemical process on the blasted titanium alloys substrate. In: 2012 International Conference on Advances in Materials Science and Engineering (AMSE 2012), 9-10 December 2012, Seoul, Korea.

Hamzah, Esah (2012) High temperature creep behavior of austenitic Fe-Ni-Cr alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 7-12 July 2012, Kuala Lumpur, Malaysia.

Hamzah, Esah (2012) Inhibition of biofilm formation using conductive polymers. In: Invited Paper: The 3rd International Conference on Engineering & ICT (iCEi2012), 2012.

Hamzah, Esah and Amrin, Astuty (2012) Effect of solution treatment temperature on the microstructures of Fe-Ni-Cr alloy. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 9-12 July 2012, Selangor, Malaysia.

Hamzah, Esah and Ibrahim, Zaharah and Hashim, Shahrir (2012) Corrosion protection of steels: a brief review on conductive polymers. Malaysian Polymer Journal, 7 (1). pp. 16-21. ISSN 1823-7789

Hamzah, Esah and Idris, Jamaliah and Gaius Debi, Eyu and Bishir, Usman (2012) Corrosion and corrosion mitigation of rebar in concrete exposed to marine environment - a review. Engineering Science and Technology: An International Journal (ESTIJ), 2 (5). pp. 900-907. ISSN 2250-3498 (Electronic) ; 2277-5293 (Print)

Hasan, Mohd. Faizal and Kuwabara, Masato and Kizu, Ryo and Yokomori, Takeshi and Ueda, Toshihisa (2012) Experimental study on a compact methanol steam reformer with Pd/Ag membrane. Journal of Thermal Science and Technology, 7 (1). pp. 135-150. ISSN 1880-5566

Hassan, Adnan and Masood, Ibrahim (2012) An integrated mewma-ann scheme towards balanced monitoring and accurate diagnosis of bivariate process mean shifts. Journal of king Saud University - Computer and Information Sciences, 24 (2). pp. 93-100. ISSN 1319-1578

Hassan, Mohd. Fahrul and Mat Saman, Muhamad Zameri and Sharif, Safian and Omar, Badrul (2012) Integration of morphological analysis theory and artificial neural network approach for sustainable product design: a case study of portable vacuum cleaner. International Journal of Sustainable Manufacturing, 2 (4). pp. 293-316. ISSN 1742-7223

Heidari, Mehdi (2012) Mechanical properties of calcium carbonate and coconut shell filled polypropylene composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Helmi, Syed Ahmad and Mohd. Yusof, Khariyah and Mohammad, Shahrin and Abu, Mohd. Salleh (2012) Enhancing team-based problem solving skills among engineering students through cooperative problem-based learning (CPBL). In: International Conference On Teaching and Learning in Higher Education (ICTLHE 2012) in conjunction with Regional Conference on Engineering, Education and Research in Higher Education (RCEE & RHED 2012), 10-12 April 2012.

Hosseini, Seyed Ehsan (2012) Performance evaluation of mild combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2012) Necessity of biodiesel utilization as a source of renewable energy in Malaysia. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5732-5740. ISSN 1364-0321

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan and Ali Abuelnuor, Abuelnuor Abdeen (2012) High temperature air combustion: sustainable technology to low No x formation. International Review of Mechanical Engineering, 6 (5). pp. 947-953. ISSN 1970-8734

Hosseini, Seyed Ehsan and Salehirad, Saber and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saat, Aminuddin (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1309-1312. ISBN 978-073541032-9

Hussein, A. K. and Ahmed, S. E. and Saha, S. and Hasanpour, A. and Hussein, Mohammed and Kolsi, L. and Adegun, I. (2012) MHD natural convection inside an inclined trapezoidal porous enclosure with internal heat generation or absorption subjected to isoflux heating. Heat Transfer - Asian Research, 41 (6). pp. 498-515. ISSN 1099-2871

Hussein, Mohanad Hamzah (2012) Characterization of diesel engine with palm oil at different compression ratio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

I. Kassem, Hassan and M. Saqr, Khalid and Mohd. Sies, Mohsin and Abdul Wahid, Mazlan (2012) Integrating a simplified P-N radiation model with edmfoam1.5: model assessment and validation. International Communications in Heat and Mass Transfer, 39 (5). pp. 697-704. ISSN 0735-1933

Idris, Mohd. Hasbullah and Sharif, Safian (2012) Differential ceramic shell thickness evaluation for direct rapid investment casting. In: The 3rd International Conf. On Mechanical and Manufacturing Engineering (ICME 2012), 20-21 November 2012, Batu Pahat, Johor.

Idris, Roslinda (2012) Modeling and experimental verification of multiphase steel for components subjected to fatigue loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, Roslinda and Prawoto, Yunan (2012) Influence of ferrite fraction within martensite matrix on fatigue crack propagation: an experimental verification with dual phase steel. Materials Science and Engineering A, 552 . pp. 547-554. ISSN 0921-5093

Idris, Siti Rabiatull Aisha (2012) Interfacial reactions during soldering of lead-free solders on copper and nickel substrates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idroas, Mohamad Yusof (2012) Design and performance study of an alpha V-type stirling engine converted from diesel engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Irandegani, Mohammad Yousef (2012) Exergy analysis on steam power plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Iskandar Shah (2012) Unsteady aerodynamic wake of helicopter main-rotor-hub assembly. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Ainaa Maya Munira (2012) Flow pattern of particle contamination in fluid flow through mitre bend. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Kamariah and Leow, Y. R. and Yong, C. Y. and Abdul Majid, I. and Thwala, W. D. and Ajagbe, M. A. (2012) Critical success factors of new product development in technology based firms: a case study. African Journal of Business Management, 6 (33). pp. 9442-9451. ISSN 1993-8233

J

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Abdul Kadir, Mohammed Rafiq (2012) Characterization of AZ91D granules covered with a flux during in-situ melting. Particle & Particle Systems Characterization, 29 (4). pp. 263-272. ISSN 0934-0866

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Farahany, Saeed (2012) In-situ melting assessment of AZ91D granules by thermal analysis. Advanced Science Letters, 14 (1). pp. 295-298. ISSN 1936-6612

Jafari, Hassan and Sadeghi, Rasoul and Idris, Mohd. Hasbullah and Ourdjini, Ali (2012) Effect of flux composition on mould-magnesium reaction during in-situ melting. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 480-485. ISBN 978-073541032-9

Jahanshaloo, Leila (2012) Simulation of contaminant removal using lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamaluddin, Hishamuddin (2012) Modeling and validation of 7-DOF ride model for heavy vehicle. In: International Conference on Automotive, Mechanical and Material Engineering (ICAMME'2012) Penang, Malaysia May 19-20, 2012., 2012.

Jamaluddin, Hishamuddin (2012) Non-pressurized magnetorheological damper controlled using Fuzzy Semi Active Damping Force Estimator (fSADE). In: International Conference on Applications and Design in Mechanical Engineering 2012, 2012.

Jamaluddin, Hishamuddin (2012) Stability augmentation system of active suspension system in electric vehicle conversion: towards optimal ride comfort performance. In: International Conference on Applications and Design in Mechanical Engineering 2012, 2012.

Jamaluddin, Hishamuddin and Ahmad, Robiah and Khalid, Marzuki and Loghmanian, Sayed Mohammad Reza (2012) Structure optimization of neural network for dynamic system modeling using multi-objective genetic algorithm. Neural Computing and Applications, 21 (6). pp. 1281-1295. ISSN 0941-0643

Jamei, Saeed (2012) Aerodynamic characteristics of compound wing configuration of wing-in-ground effect vehicle. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamei, Saeed and Maimun, Adi and Mansor, Shuhaimi and Priyanto, Agoes and Nor Azwadi, Nor Azwadi (2012) Aerodynamic behavior of a compound wing configuration in ground effect. In: Proceedings of The 6th Asia-Pacific Workshop on Marine Hydrodynamics, 3-4 September 2012, Universiti Teknologi Malaysia, Johor.

Jamid, Mohd. Fairus (2012) Active vibration control of flexible plate structure using smart material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, A. and Zamani, Zamani and Pauzi, Pauzi and Saman, Saman (2012) Effect of stern hull shape on turning circle of ships. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 1191-1196. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Abdul Wahid, Mazlan and Priyanto, Agoes and Ahmad, Mohd. Zamani and Abdul Ghani, Mohamad Pauzi and Saman, Saman (2012) Study on zigzag maneuver characteristics of V-U very large crude oil (VLCC) tankers. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1128-1132. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Priyanto, Agoes and Abdul Wahid, Mazlan and Zamani, Zamani and Saman, Saman and Pauzi, Pauzi (2012) An integrated CFD simulation tool in naval architecture and offshore (NAO) engineering. In: 4Th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 1175-1181. ISBN 978-073541032-9

Jaswar, Jaswar and Abdul Malik, Adi Maimun and Selamat, Ali and Priyanto, Agoes and Zamani, Zamani and Pauzi, Pauzi and Djuansjah, J. R. P. (2012) Integrated ship maneuverability simulation tool for very large crude oil carrier. International Journal of Digital Content Technology and its Applications, 6 (13). pp. 542-548. ISSN 1975-9339

Jiran, Nur Syamimi (2012) Logistics strategy for implementation of industrialized building system in Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jong, Rudiyanto P. and Osman, Kahar and M. Adib, M. Azrul Hisham (2012) Determination of correlation between backflow volume and mitral valve leaflet young modulus from two dimensional echocardiogram images. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Melville, New York, pp. 604-611. ISBN 978-073541032-9

Jumaidin, Ridhwan (2012) Effect of heat treatment on the microstructures and mechanical properties of Fe-Ni-Cr superalloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

K

Kamali, Fatemeh (2012) Imperialisme competitive algorithm for distribution problem in supply chain network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruddin, T. N. A. T. and Mat Darus, Intan Zaurah (2012) System identification for internal combustion engine model. In: Proceedings - 6th Asia International Conference on Mathematical Modelling and Computer Simulation, AMS 2012. IEEE, New York, USA, pp. 17-22. ISBN 978-076954730-5

Kamarul Asri, A. and Hamzah, Esah (2012) Corrosion behaviour of lead-free and Sn-Pb solders in 3.5wt% NaCl. In: The 8th International Materials Technology Conference and Exhibition (IMTCE 2012), 7-12 July 2012, Kuala Lumpur, Malaysia.

Kamitani, Shunpei and Nakanishi, Kenji and Matsushita, Takafumi and Samion, Syahrullail (2012) Measurement of coefficient of friction under bulk plastic deformation by using plane strain extrusion apparatus with plane plate tool and raper die. Tribology online, 7 (4). pp. 249-257. ISSN 1881-2198

Kamsah, Nazri (2012) Application of thermal energy storage system for a lowland greenhouse. In: The 5th International Conference on Advances in Thermal-Fluid, 2012.

Kamsah, Nazri (2012) Effects of natural ventilations on indoor air of a double-storey residential house in Malaysia. In: The 5th International Conference on Advances in Thermal-Fluid, 2012.

Kamsah, Nazri (2012) Stability of cementless hole and non-hole hip prosthesis. In: 2012 International Conference on Biomedical Engineering (ICoBE), 2012.

Kamsah, Nazri and Tamin, Mohd. Nasir and Mohamed Kamar, Haslinda and Lahuri, Hidayatunnur and Wagiman, Amir Nur Rashid (2012) Development of vapor pressure in FR4-copper composite material during solder reflow process. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Melville, New York, pp. 116-123. ISBN 978-073541032-9

Karimian, Majid and Ourdjini, Ali and Idris, Mohd. Hasbullah and Jafari, Hassan (2012) Effect of pattern coating thickness on characteristics of lost foam Al-Si-Cu Alloy casting. Transactions of Nonferrous Metals Society of China (English Edition), 22 (9). pp. 2092-2097. ISSN 1003-6326

Kasani, Adam (2012) Parametric study on two phased flow in non-adiabatic concentric capillary tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kasesaz, Meysam (2012) An experimental study of soot partices morphology and flame stability in laiminar diffussion flames fuelled by typical biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kasgari, Roja Abedian (2012) Human reach for safety, comfort and efficiency at work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kaviri, A. Ganjeh and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Kaviri, H. Ganjeh (2012) The comparison of various gas turbine inlet aircooling methods for various ambient condition trough energy and exergy analysis. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1141-1155. ISBN 978-073541032-9

Kazi, Suhail (2012) Robust active force controller for an automotive brake system. In: IEEE Xplore Digital Library / 2012 Third International Conference on Intelligent Systems Modelling and Simulation, 2012.

Keshavarz, Meysam (2012) Thermal barrier coating on gamma titanium aluminide by EB-PVD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Keshvari, Bahador (2012) Determining the effect of gender and racial differences on mental and physical tasks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khavaripour, Hesam (2012) Simulation of blood vessel surrounded by tissue during thermal theraphy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kherbeet, A. Sh. and Mohammed, Hussein A. and Salman, B. H. (2012) The effect of nanofluids flow on mixed convection heat transfer over microscale backward-facing step. International Journal of Heat and Mass Transfer, 55 (21-22). pp. 5870-5881. ISSN 0017-9310

Khosravani, Mohammad Reza (2012) Vibration analysis of modeled composite aircraft wing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kidam, Kamarizan and Hurme, Markku (2012) Method for identifying contributors to chemical process accidents. Process Safety and Environmental Protection . ISSN 0957-5820

Kok, F. S. and Muhamad, Ida Idayu and Lee, Chew Tin and Razali, Firdausi and Pa’e, N. and Salleh, Shaharuddin (2012) Effects of pH and temperature on the growth and ß-glucosidase activity of lactobacillus rhamnosus NRRL 442 in anaerobic fermentation. International Review of Chemical Engineering, 4 (3). pp. 293-299. ISSN 2035-1755

Koloor, S. S. R. and Tamin, Mohd. Nasir (2012) Effects of lamina damages on flexural stiffness of CFRP composites. In: 8th Asian-Australasian Conference on Composite Materials (ACCM-8), 6-8 November 2012, Kuala Lumpur, Malaysia.

Kurniawan, Denni (2012) Effect of strain rate and temperature on elastic properties of PCL/starch. In: Proceedings of the 8th Asian-Australasian Conference on Composite Materials, 2012.

Kurniawan, Denni (2012) Silane treatments on cellulose fabric/PLA composites. In: Proceedings of the 8th Asian-Australasian Conference on Composite Materials, 2012.

L

Lalmazloumian, Morteza (2012) Robust optimization of tactical supply chain planning of agile manufacturing in build-to-order environment under uncertainty. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lalmazloumian, Morteza and Wong, Kuan Yew (2012) A review of modelling approaches for supply chain planning under uncertainty. In: 2012 9Th International Conference on Service Systems and Service Management - Proceedings of ICSSSM '12. IEEE, New York, USA, pp. 197-203. ISBN 978-145772025-3

Le Tran, Trung Kien (2012) Determination of safety inventory under uncertain conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Leong, Mohd. Salman and Lim, Meng Hee and Guai, Yeu Kae (2012) Turbine generator synchronization - two case studies. Sound and Vibration, 46 (5). pp. 8-11. ISSN 1541-0161

Li, Jia Wei (2012) The system identification of HVAC artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lintang, Hendrik Oktendy (2012) Energy audit of the buiding air-conditionin system. In: Proceedings Of 1St International Conference On Multiple-Governance In Islam, Environmental Development, And Cooperation (20-23 November 2012, Universiti Teknologi Malaysia, Johor Malaysia), 2012.

Loghmanian, Sayed Mohammad Reza and Jamaluddin, Hishamuddin and Ahmad, Robiah and Yusof, Rubiyah and Khalid, Marzuki (2012) Structure optimization of neural network for dynamic system modeling using multi-objective genetic algorithm. Neural Computing & Applications, 21 (6). pp. 1281-1295. ISSN 0941-0643 (Print); 1433-3058 (Electronic)

M

M. Nor, Fethma and Kurniawan, Denni and Young, Kwon Seo and Jung, Keug Park and Ho, Yong Lee and Joong, Yeon Lim (2012) Polycaprolactone-starch blends with corn-based coupling agent: physical properties and in vitro analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 226 (9). pp. 693-698. ISSN 0954-4119 (Print); 2041-3033 (Electronic)

Ma'aram, Azanizawati (2012) Optimization of rounded-shape floating LNG production and storage capacity using simulation modeling (part 1). In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro 2012), 2012.

Ma'aram, Azanizawati (2012) Optimization of rounded-shape floating LNG supply chain efficiency with simulation modeling. In: International Conference on Marine Technology, 2012.

Maarof, Mohd. Rashidi and Idris, Mohd. Hasbullah (2012) Study on conversion of higher sulfur pig iron to ductile iron using in-mold treatment technique. International Review of Mechanical Engineering, 6 (4). pp. 896-900. ISSN 1970-8734

Madadi, Najmeh (2012) A multi-objective fuzzy mixed integer linear programming model for aggregate production planning of an automotive parts manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa (2012) Tracking performance of a 3D articulated mobile manipulator using active force control. In: 1st International Conference on Systems, Control, Power, Robotics (SCOPORO'12), 114-16 May, 2012, Singapore.

Maimun, Adi (2012) Optimize the configuration of the compound wing in ground effect. In: International Conference on Marine Technology, 2012.

Malek, Afagh (2012) Assessment of ketchup companies performance in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansoorzadeh, Shiva and Mohd. Yusof, Sha'ri and Zeynal, Hossein and Mansoorzadeh, Shahriar (2012) A risk-based project schedule estimation method to improve project reliability. Advanced Science Letters, 13 (1). pp. 813-816. ISSN 1936-6612

Marwah, Omar Mohd. Faizan and Sharif, Safian and Ibrahim, Mustaffa (2012) Direct fabrication of IC sacrificial patterns via rapid prototyping approaches. International Journal of Automation Technology, 6 (5). pp. 570-575. ISSN 1881-7629

Mashudin, Mirdawati (2012) Production of high bromelain pineapple (ananas comosus) juice by membrane filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Maslan, Mohd. Nazmin (2012) Modelling and identification of piezoelectric actuators using system identification technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Masood, Ibrahim and Hassan, Adnan (2012) Pattern recognition for bivariate process mean shifts using feature-based artificial neural network. International Journal of Advanced Manufacturing Technology, 66 (9-12). pp. 1201-1218. ISSN 0268-3768

Mat Darus, Intan Zaurah (2012) Identification and control of a piezoelectric patch actuator. In: 1st International Conference on Systems, Control, Power, Robotics (SCOPORO '12), 2012.

Mat Darus, Intan Zaurah and Mohamad, Maziah (2012) Intelligent parametric identification and dynamic characterisation of flexible manipulator system. In: IEEE Conference on Control, Systems & Industrial Informatics, 23 - 26 September 2012, Bandung, Indonesia.

Mat Lazim, Ahmad Razimi and Abdul Hamid, Mohd. Kameil and Abu Bakar, Abd. Rahim (2012) Effect of pad surface topography on disc brake squeal. Applied Mechanics and Materials , 165 . pp. 58-62. ISSN 1660-9336

Mat Saman, Muhamad Zameri (2012) A conceptual framework for ERP systems implementation in SMEs. In: 5Th International Colloquium on Business And Management, 2012.

Mat Saman, Muhamad Zameri (2012) A framework for estimating the sustainability index of new product based on AHP and BP neural network. In: Proceedings of the 2012 International Conference on Industrial Engineering and Operations Management, 2012.

Mat Saman, Muhamad Zameri and Blount, Gordon and Zakuan, Norhayati (2012) Design for end-of-life value framework for vehicle design and development process. Journal of Sustainable Development, 5 (3). pp. 95-111. ISSN 1913-9071 (Electronic); 1913-9063 (Print)

Mat Saman, Muhamad Zameri and Sharif, Safian (2012) Evaluation of sustainability performance of product design element concepts using analytic hierarchy process. In: The 3rd International Conf. on Mechanical and Manufacturing Engineering (ICME 2012), 20-21 November 2012, Batu Pahat, Johor.

Mat Tokit, E. and Mohammed, Hussein A. and Yusoff, M. Z. (2012) Thermal performance of optimized interrupted microchannel heat sink (IMCHS) using nanofluids. International Communications in Heat and Mass Transfer, 39 (10). pp. 1595-1604. ISSN 0735-1933

Maziar, Reza (2012) Ejector refrigeration cycle for automotive air conditioning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Noor Rudin, Noor Fawazi and Jung, Youn Lee and Jae, Eung Oh (2012) A load-displacement prediction for a bended slotted disc using the energy method. Proceedings Of The Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 226 (8). pp. 2126-2137. ISSN 0954-4062

Md. Sheriff, Jamaluddin and Osman, Kahar and Asral, Asral (2012) Effect of semi-circular wavy liner on performance of journal bearing. In: 4Th International Meeting of Advances In Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 571-577. ISBN 978-073541032-9

Md. Sirat, Rozlina and Mohamed Shaharoun, Awaluddin and Syed Hassan, Syed Abdul Hamid and Zakuan, Norhayati (2012) Perceptions of ergonomics importance at workplace and safety culture amongst safety & health (SH) practitioners in Malaysia. In: Proceedings of the World Congress on Engineering 2012, 4-6 July, 2012, London, United Kingdom.

Memari, Ashkan (2012) Performance evaluation of distribution network in a supply chain using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Miguel, Antonio Ferreira and Ochsner, Andreas (2012) This Special Issue presents a set of papers presented to the special session "design generation and evolution of flow systems" of the 7-th International Conference on Diffusion in Solids and Liquids - DSL2011. International Journal of Fluid Mechanics Research, 39 (2). pp. 99-100. ISSN 1064-2277 (Print); 2152-5102 (Electronic)

Mohamad, Nor Azimah (2012) Determination of road safety index for Malaysia road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Kamal, Mohamad Ridzuan (2012) The effect of rolling temperature on the properties of biodegradable MG-0.7CA alloy for implant application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Azhar (2012) Numerical investigation of thermal fluid flow through porous media from a differentially heated concentric annulus cylinder. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Jamil, Fariza (2012) Effect of heat treatment on the microstructures and hardness of Ti-48Al-xCr alloys. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Kamar, Haslinda and Kamsah, Nazri and Md.Tap, Masine and Salimin, K. A. M. (2012) Assessment of thermal comfort in a naturally ventilated residential terrace house. In: 4Th International Meeting of Advances In Thermofluids (IMAT 2011), Pt 1 And 2. American Institute of Physics, New York, USA, pp. 247-254. ISBN 978-073541032-9

Mohamed Kamar, Haslinda and Kamsah, Nazri and Mohammad Nor, Ahmad Miski (2012) Numerical analysis of air-flow and temperature field in a passenger car compartment. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 854-862. ISBN 978-073541032-9

Mohamed Kamar, Haslinda and Senawi, Mohd. Yusoff and Kamsah, Nazri (2012) Computerized simulation of automotive air-conditioning system: development of mathematical model and its validation. IJCSI - International Journal of Computer Science Issues, 9 (2). pp. 23-34. ISSN 1694-0784 (Print) ; 1694-0814 (Electronic)

Mohamed Sharif Ahmed, Salaheldin Ahmed (2012) Chloride stress corrosion cracking of 316L stainless steel in sour gas service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Sultan, Al Amin (2012) Lean manufacturing implementation at automotive manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Adham, Ahmed and Mohd. Ghazali, Normah and Ahmad, Robiah (2012) Cooling of microchannel heat sinks with gaseous coolants. In: The 5th BSME International Conference on Thermal Engineering, 21 - 23 December, 2012, Dhaka, Bangladesh.

Mohammad Khanlou, Hossein (2012) The effect of pre-treatment parameters on titanium alloys prior to PVD coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Pourtousi, Mohammad Pourtousi (2012) Simulation of particle motion in incompressible fluid by lattice boltzmann MRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammadi, Maryam (2012) A mixed integer programming model formulation for solving the lot sizing problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammadi, Maryam and Md. Tap, Masine (2012) A mixed integer programming model formulation for solving the lot-sizing problem. Internation Journal of Computer Science Issues, 9 (2). pp. 1694-1703. ISSN 1694-0784

Mohammed, Hussein A. and Al-Aswadi, A. A. and Yusoff, M. Z. and Saidur, R. (2012) Buoyancy-assisted mixed convective flow over backward-facing step in a vertical duct using nanofluids. Thermophysics and Aeromechanics, 19 (1). pp. 33-52. ISSN 0869-8643 (Print); 1531-8699 (Electronic)

Mohammed, Hussein A. and Narrein, K. (2012) Thermal and hydraulic characteristics of nanofluid flow in a helically coiled tube heat exchanger. International Communications in Heat and Mass Transfer, 39 (9). pp. 1375-1383. ISSN 0735-1933

Mohammed Sa'arani, Adrianna (2012) Vortex formation at sluice gate as used at Department of Irrigation and Drainage Johor (JPS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Saleh, Aqel (2012) Information system in accident prevention in UTM Casting Laboratory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd Hazmil Syahidy , Abdol Azis and Che Sidek, Nor Azwadi (2012) Analysis of bouyancy-aided convection heat transfer from horizontal cylinder at low reynolds number. In: 4Th International Meeting Of Advances In Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 49-56. ISBN 978-073541032-9

Mohd. Adib, Mohd Azrul Hisham and Mohd. Hasni, Nur Hazreen and Osman, Kahar and Maskon, Oteh (2012) Analysis on rigidity of mitral valve leaflet (MVL) and backflow problems during cardiac cycle. Journal of Biomimetics, Biomaterials, and Tissue Engineering, 13 (1). pp. 75-79. ISSN 1662-1018

Mohd. Aris, Maslina (2012) Ship hull noise and vibration induced by prime mover - quantitative and qualitative assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Din, Mohd. Azlan Shah (2012) Scaffolding practices at construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, Normah (2012) Experimental investigations of rheological behavior and pressure drop of aqueous suspensions of carbon nanotubes in a horizontal tubes. In: The 5th BSME International Conference on Thermal Engineering, 2012.

Mohd. Ghazali, Normah (2012) Investigation of a portable standing wave thermoacoustic heat engine. In: 5th BSME International Conference on Thermal Engineering, 21 – 23 December, 2012, Dhaka, Bangladesh.

Mohd. Ghazali, Normah (2012) Investigation of the velocity profiles in a ninety-degree curved standing wave resonator with PIV. In: Proceeding of The 5th International Meeting on Advances in Thermofluids (IMAT), 12 - 13 November 2012, Bintan, Indonesia.

Mohd. Ghazali, Normah and Ghazali, Ahmad Dairobi and Ali , Irwan Shah and A. Rahman, Muhammad Aminullah (2012) Geometry effects on cooling in a standing wave cylindrical thermoacousic resonator. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 1320-1324. ISBN 8-073541032-9

Mohd. Ghazali, Normah and Lau Lau, Kwan Yiew and Mohd.Yusoff, S. (2012) Thermal analysis of Malaysian double storey housing - low/medium cost unit. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 513-520. ISBN 978-073541032-9

Mohd. Ismail, Mohd. Shuisma (2012) Engineering education and product design: Nigeria’s challenge. In: Regional Conference On Engineering Education & Research In Higher Education 2012 RCEE & RHEd 2012, 2012.

Mohd. Ismail, Mohd. Shuisma (2012) Trends on competitive machine/product design. In: Nigerian Annual International Conference and Exhibition 2012 NAICE 2012, 2012.

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohamad Shaiful Ashrul (2012) Teknik pembakaran hijau: pembakar berbahan api cecair. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0890–4

Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and A. Eldrainy, Yehia (2012) Combustor aerodynamics. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0853–9

Mohd. Mokhtar, Noor Zaimah (2012) High speed direct nano-crystalline nickel plating on titanium surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Nasir, Laila Masrur (2012) High speed nickel electroplating on aluminium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Norddin, Khairul Hafiz Norddin and Mat Saman, Muhamad Zameri (2012) Implementation of total productive maintenance concept in a fertilizer process plant. Jurnal Mekanikal (34). pp. 66-82. ISSN 0127-3396

Mohd. Rohani, Jefri (2012) An empirical study of critical success factors for statistical process control implementation: a second-order factor analysis. In: 2012 IEEE International Conference on Industrial Engineering and Engineering Management, 2012.

Mohd. Sa'at, Jasmi (2012) Parameter setting through optimization of variable cooling channels which effect to the injection moulding product quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Saad, Rozaimi and Hussin, Radhwan and Hussin, Razaidi and Mohd. Dawi, Mohd. Syedi Imran (2012) An optimization of plastic injection molding parameters using Taguchi optimization method. Asian Transactions on Engineering, 2 (5). pp. 75-80. ISSN 2221-4267

Mohd. Said, Mohd. Nur Syakirin (2012) Work improvement at an automotive supplier manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Saleh, Muhammad Shafif (2012) Configuration of synthetic mooring for two side by side FPSO tanker in shallow water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Samin, Pakharuddin (2012) Effect of PAO-based y-Fe2O3 and surfactant concentration on viscosity characteristic. In: 2nd. International Conference on Engineering and Technology Innovation 2012 (ICETI2012), 2–6 November 2012, Kaohsiung, Taiwan.

Mohd. Shaffiar, Norhashimah (2012) Integration of damage-based models for fatigue of solder interconnects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Taib, Jamaludin and Hanafiah, Khairul Anwar (2012) AUTOCAD for engineers. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0806–5

Mohd. Yusof, Noordin (2012) Acid pretreatment of WC-Co for surface roughening and cobalt removal prior to CVD diamond coating. In: 3rd International Conference On Mechanical & Manufacturing Engineering 2012 (ICME 20120), 2012.

Mohd. Yusof, Noordin (2012) Calculation of energy consumption in machining of hardened stainless steel. In: Proceedings of the International Conference on Sustainable Energy and Development for Future Generations, 2012.

Mohd. Yusof, Noordin (2012) Characteristics of electroplated nickel layer on tungsten carbide. In: 3rd International Conference on Mechanical & Manufacturing Engineering 2012 (ICME 20120), 2012.

Mohd. Yusof, Noordin and Davoudinejad, Ali and Shaari, Mohd. Rosmaini (2012) Effect of tool edge geometry on cutting force and surface roughness when hard turning tool steel. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 15-19.

Mohd. Yusof, Sha'ri (2012) A review of performance management in Research and Development (R&D) firms through Quality Management implementation. In: The Sixth Quality Conference In The Middle East, 2012.

Mohd. Yusof, Sha'ri (2012) Risk based schedule reliability in construction phases of EPC projects in power industry. In: Asia Pacific Industrial Engineering & Management Systems Conference 2012 , 2012.

Mohd. Yusof, Sha'ri (2012) Sustainable manufacturing performance measures in Malaysian automotive companies: survey results. In: 10th Global Conference on Sustainable Manufacturing (GCSM2012), 31 October - 2 November, 2012, Istanbul, Turkey.

Mohd. Yusop, Mohd. Zamri and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and As'arry, A. (2012) Performance of a passive device in improving tremor patients' handwriting capability. In: 2012 International Conference on Biomedical Engineering, ICoBE 2012. IEEE, New York, USA, pp. 400-403. ISBN 978-145771989-9

Mohd. Zaidan, Nurhanna (2012) Gel cast of ceramic membrane for water filtration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokhtar, Iqbal (2012) Mechanical and in-vitro analysis of basalt/high density polyethylene composite for upper extremity joint application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moradi, Razieh (2012) Performance analysis of reinforced stone columns based on finite element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moradifard, Hossein (2012) Improving the system performance of a two-link robotic arm actuated by Pneumatic Actuator Muscle (PAM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Motasemi, F. and Ani, Farid Nasir (2012) A review on microwave-assisted production of biodiesel. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4719-4733. ISSN 1364-0321

Motasemi, Farough and Ani, Farid Nasir (2012) Microwave irradiation biodiesel processing of waste cooking oil. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 842-852. ISBN 978-073541032-9

Mozafari, H. and Abdi, B. and Ayob, Amran (2012) Opt.imal design of non-monotonic heat-conducting thin adhesive layer based on imperialist competitive algorithm. In: Applied Mechanics and Materials. Trans Tech Publications, Switzerland, pp. 949-955. ISBN 978-303785262-0

Mozafari, Hamid (2012) Finite element investigation of transmission conditions for thin interphases. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mubarak Habiballah, Thagip Tarig (2012) Thermal effect in pressure fluctuation : internal flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad, Salehuddin (2012) Wind tunnel testing of composite wing flutter speed due to control surface excitation. In: 3rd International Conference on Mechanical and Manufacturing Engineering 2012 (ICME2012), 2012.

Muhamad Said, Mohd. Farid and Said, Mazlan and Abdul Aziz, Azhar (2012) Modelling of diesel engine fuelled with biodiesel using engine simulation software. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 307-313. ISBN 978-073541032-9

Musa, Md. Nor (2012) Theoretical study of a novel multi vane rotary compressor. In: 21st International Compressor Engineering Conference, 16-19, November, 2012, Purdue, United States.

Musa, Md. Nor (2012) The use of mechanical ventilation system in an electric car. In: IMAT 2012 The 5th International Meeting of Advances in Thermo-Fluids, 12-13 November, 2012, Indonesia.

Musa, Md. Nor and Osman, Kahar and Hamat, Ab. Malik A. (2012) Computational analysis of flow field around ahmed car model passing underneath a flyover. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 190-198. ISBN 978-073541032-9

Mustadza, Ameirul Azraie (2012) Harnessing energy from micro vibration using smart materials. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustaffar , Mushairry (2012) Investigation of eco-labeling implementation in Malaysia. In: APSEC-ICCER 2012, 2012.

N

Najm, Layla Suhail (2012) Effect of inhibitors on the corrosion behaviour of carbon steel in aqueous environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nakhaei, Habibollah and Norhan Hamid, Nik Intan and Ahmad Anuar, Melati and Nakhaei, Karim (2012) Performance appraisal with accounting and value based measures. In: International Proceedings of Economics Development and Research, 2012, 24-25 Dec, 2012, Bangkok, Thailand.

Nasution, Henry (2012) Energy efficiency of buiding air conditioning system with artificial intellegent. In: Proceeding The 5Th International Meeting On Advanced Thermofluid - IMAT 2012, 12 - 13 November 2012, Bintan Island - Indonesia.

Nasution, Henry (2012) Performance studies of automotive air conditioning system. In: Proceeding Industrial Research Workshop And National Seminar 2012, 2012.

Nasution, Henry (2012) Performansi mesin pendingin kompresi uap menggunakan electronic expension valve (EEV) dan thermostatic expension valve (TEV) sebagai kendali laju aliran refrigeran. In: International Conference On Water Resources (Icwr2012). 5-9 Nov 2012, Bay View Hotel Langkawi Kedah, 2012.

Nasution, Henry (2012) Performansi sistem pendingin kenderaan dengan variasi putaran, temeratur setting dan beban pendingin. In: , 2012.

Nasution, Henry (2012) Retrofitting R-22 split type air conditioning with hydrocarbon (HCR-22) refrigerant. In: The 5th IMAT International on Advances in Thermo-fluids, 2012.

Nasution, Henry and Zainudin, Muhammad Amir and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Mohd. Perang, Mohd. Rozi and Abdul Rahman, Abd. Halim (2012) Experimental evaluation of automotive air-conditioning using HFC-134A and HC-134A. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 997-1002. ISBN 978-073541032-9

Nezhadi, Amirhossein and Abdul Rahman, Roslan and Ayob, Amran and Fard, Keramat Malekzadeh (2012) Free and forced vibrations of FGM conical shell under impulse loads. Research Journal of Applied Sciences, Engineering and Technology, 4 (20). pp. 4055-4065. ISSN 2040-7467

Ngadiman, Mohd. Salihin (2012) The conceptual model of uncertainty factors in environmental issues on late delivery for construction industry. In: The 2nd International Conference on Energy, Environment and sustainable Development (EESD2012), 12-14 October, 2012, Jilin , China.

Ngali, Zamani and Osman, Kahar and Johari, Nasrul Hadi (2012) Splitting solver with immersed boundary extension for the analysis of backward-facing step flow. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 1040-1048. ISBN 978-073541032-9

Nik Ismail, Nik Mohd. Khairuddin (2012) Investigation of motion and wave induced forced on semi-submersible in regular wave. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Mohd., Nik Ahmad Ridhwan and Barakos, George N. (2012) Computational aerodynamics of hovering helicopter rotors. Jurnal Mekanikal, 34 . pp. 16-46. ISSN 0127-3396

Nik Omar, Nang Jamilah (2012) Life cycle cost of pumping stations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nikakhtar, Amin (2012) Construction process improvement through the application of lean production principles via computer simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nikakhtar, Amin and Hosseini, Alireza Abbasian and Wong, Kuan Yew (2012) Sensitivity analysis of construction processes using computer simulation: a case study. Advanced Science Letters, 13 (1). pp. 680-684. ISSN 1936-6612

O

Ochsner, Andreas and Da Silva, Lucas F. M. and Altenbach, H. (2012) Preface. Materialwissenschaft Und Werkstofftechnik, 43 (5). p. 365. ISSN 0933-5137

Ochsner, Andreas and Da Silva, Lucas F. M. and Altenbach, H. (2012) This special issue of materials science and engineering technology preface. Materialwissenschaft Und Werkstofftechnik, 43 (5). p. 365. ISSN 0933-5137

Oktaviandri, Muchamad (2012) A decision support tool for dynamic job shop scheduling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osman, Kahar and Ali, Zairi and Ubaidullah, S. and Zahid, M. N. (2012) Numerical prediction on the dispersion of pollutant particles. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 65-71. ISBN 978-073541032-9

Osman, Saliza Azlina (2012) Interfacial reactions between tin-silver-copper lead-free solders and nickel (P)/palladium/gold and nickel (B)/palladium/gold surface finishes. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

P

Phuman Singh, Amrik Sing (2012) Identifcation of vehicle rollover condition and active roll control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Prawoto, Yunan and Djuansjah, J. R. P. and Shaffiar, N. B. (2012) Re-visiting the 'rule of mixture' used in materials with multiple constituting phases: a technical note on morphological considerations in austenite case study. Computational Materials Science, 65 . pp. 528-535. ISSN 0927-0256

Prawoto, Yunan and Kamsah, Nazri and Ahmad, Zaini (2012) Exploring the potential use of adhesion strength for coating analysis. International Journal of Applied Physics and Mathematics, 2 (2). pp. 67-72. ISSN 2010-362X 

Prawoto, Yunan and Onn, Irwan H. (2012) Application of J-integral concept on blister coating problem. Engineering Fracture Mechanics, 92 . pp. 114-125. ISSN 0013-7944

Prawoto, Yunan and Sumeru, K. and Wan Nik, W. B. (2012) Stress corrosion cracking of steel and aluminumin sodium hydroxide: field failure and laboratory test. Advances in Materials Science and Engineering, 2012 . pp. 1-8. ISSN 1687-6822

Priyanto, Agoes (2012) Effect of angle of attack on rudder inflow visualization using fluent. In: International Conference on Marine Technology, Kuala Terengganu, Malaysia, 20-22 October 2013, 2012.

Priyanto, Agoes (2012) Recurrence wave run up on a large volume semisubmersible. In: Proceedings of Twenty-Second (2012) International Offshore & Polar Engineering Conference (ISOPE), 2012.

Priyanto, Agoes and Abdul Malik, Adi Maimun and Abdul Ghani, Mohamad Pauzi and Ismail, Nasrudin and Abdul Kader, Ab. Saman (2012) Recurrence wave run up on a large volume semisubmersible. In: Proceedings of the International Offshore and Polar Engineering Conference. The International Society of Offshore and Polar Engineers (ISOPE), California, USA, pp. 942-948. ISBN 978-188065394-4

Priyanto, Eko and Maimun, A. and Noverdo, S. and Saeed, J. and Faizal, A. and Waqiyuddin, M. (2012) A study on estimation of propulsive power for wing in ground effect (WIG) craft to take-off. Jurnal Teknologi, 59 . pp. 43-51. ISSN 2231-7376

Putra Cupu, Dedi Rosa (2012) Numerical analysis of elastohydrodynamic lubrication with bio-based fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Putra Cupu, Dedi Rosa (2012) Numerical analysis of elastohydrodynamic lubrication with bio-based fluids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

R

Rahimuddin, Rahimuddin and Abdul Malik, Adi Maimun and Abdul Ghani, Muhamad Pauzi (2012) And fin stabilizer effect. In: Proceedings of The 6th Asia-Pacific Workshop on Marine Hydrodynamics, 3-4 September 2012, Universiti Teknologi Malaysia, Johor.

Rahimuddin, Rahimuddin and Maimun, Adi and Abdul Ghani, Pauzi and Priyanto, Agoes and Muhammad, Andi Haris (2012) Nonlinear response of SemiSWATH ship, bow-diving, and fin stabilizer effect in following seas. International Journal of Engineering & Technology IJET-IJENS, 12 (2). pp. 38-47. ISSN 2077-1185

Rahmandoust, Moones (2012) Computational mechanics modelling of carbon nanotube-based nanocomposites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Raja Ahsan Shah, Raja Mazuir and Jones, R. P. and Pawar, J. S. (2012) System modelling and analysis of the driveability response of 4WD vehicle. International Review of Mechanical Engineering, 6 (3). pp. 595-601. ISSN 1970-8734

Rajo Mantari, Muhammad Hanafi Asril (2012) Experimental investigation of spray characteristics for palm olein blends. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramdan, Raden Dadan and Takaki, Tomohiro and Pangestu Djuansjah, Joy Rizki and Sofyan, Bondan Tiara and Hamzah, Esah (2012) Development of phase field simulation for the growth of dendrite structure of Al-Si Cast alloy. In: Seminar on Nanotechnology Application on Energy and Environment 2012 (NAEE 2012), 20 - 21 September 2012, ITB Bandung, Indonesia.

Rasid, Zainudin A. and Mazlan, Saiful Amri and Ayob, Amran and Zahari, Rizal and Majid, Dayang Laila and Mohd Rafie, Azmin Shakrine (2012) The strain energy tuning of the shape memory alloy on the post-buckling of composite plates using finite element method. Advanced Materials Research, 445 . pp. 577-582. ISSN 1662-8985

Razzaghian, Mohammad (2012) Simulation of natural convection in open ended enclosures by lattice boltzmann method SRT model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Redzuan, Norizah (2012) Mechanical properties of cellulose fabric/polylactic acid composites: effect of silane coupling agent and atmospheric plasma polymerization. In: World Congress on Engineering 2012, 2012.

Roslan, A. R. (2012) Experimental methods to determine noise in compartment and acceleration on boths sides of elastomeric powertrain mount of passenger car. In: 6th South East Asian Technical University Consortium (SEATUC) Symposium, 2012.

Rosmin, Norzanah and Hassan, Mohammad Yusri and Sidik, Muhammad Abu Bakar and Abdul Manaf, Muhammad Safwan (2012) Tidal energy generation using the double-emptying system scheme. Perintis E-Journal (Journal Persatuan Saintis Muslim Malaysia), 2 (2). pp. 1-12. ISSN 2232-0725

Rupani, Mohammad Mobin (2012) Supplier selection based on fuzzy dematel and fuzzy topsis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rusli, Ahmad Najmie (2012) The effect of omega shape and kinked keel on resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

S., Alexandrov and Yusof, Mustafa (2012) A three dimensional limit load solution for highly undermatched single edge cracked specimens in pure bending. Fatigue and Fracture of Engineering Materials and Structures, 36 (5). pp. 375-381. ISSN 8756-758X

Saad, Mohd. S. and Jamaluddin, Hishamuddin and Mat Darus, Intan Zaurah (2012) Iterative algorithm for active vibration control of flexible beam. International Review of Mechanical Engineering, 6 (1). pp. 61-73. ISSN 1970-8734

Saat, Aminuddin (2012) Effect of diluted and preheated oxidizer on the emission of methane flameless combustion. In: AIP Conference Proceedings, 2012.

Saat, Aminuddin (2012) Effect of fuel droplets during early stage of flame propagation. In: 12-13 November 2012 :5th International Meeting on Advances on Thermofluids, Bintan Island, Indonesia, 2012.

Saat, Aminuddin and Dutta, Nilabza and Abdul Wahid, Mazlan (2012) Characterisation of aerosol combustible mixtures generated using condensation process. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 109-115. ISBN 978-073541032-9

Saba, Tanzila (2012) Offline cursive touched script non-linear segmentation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabzehmeidani, Yaser (2012) Mechatronic development of an in-pipe microrobot with intelligent active force control. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadeghipour, S. and Ghaderian, J. and Abdul Wahid, Mazlan (2012) Advances in aluminum powder usage as an energetic material and applications for rocket propellant. In: 4Th International Meeting of Advances In Thermofluids (IMAT 2011), Pt 1 And 2. American Institute of Physics, Melville, NY, pp. 100-108. ISBN 978-073541032-9

Sadeghipour, Sakineh (2012) Performance evaluation of solar air heaters with single and double passess. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadeghipour, Sakineh (2012) Performance evaluation of solar air heaters with single and double passess. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safdari, Arman (2012) Simulation particle motion in incompressible three dimensional cavity flow by Lattice Boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said, Mazlan and Abdul Aziz, Azhar and Muhamad Said, Mohd. Farid (2012) Effect of palm methyl ester - diesel blends performance and emission of a single-cylinder direct-injection diesel engine. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 562-570. ISBN 978-073541032-9

Said Mohamed, Mohamed Ahmed (2012) Park visitation characteristic in Khartoum, Sudan. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salam, Zainal (2012) A simple circuit to improve the power yield of pv array during partial shading. In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation (ISMS 2012), 2012.

Salehirad, Saber (2012) Study of NOx emission in flameless combustion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salema, Arshad Adam (2012) Pyrolysis of oil palm biomass using microwave induced system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samat, Khairul Fadzli (2012) Design and development of rehabilitation device for hemiparetic patients. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samian, Yahya (2012) Students' perception on good lecturer based on lecturer performance assessment. In: International Conference on Teaching and Learning in Higher Education 2012, 2012.

Samion, Syahrullail and A., Norhayati and S., Maizan and H. M., Zin and J. Y., Wira and W. B., Wan Nik (2012) The influence of lubricant viscosity in cold work forward extrusion using micro-pits tool. Jurnal Teknologi, 58 (2). pp. 89-93. ISSN 2231-7376

Samion, Syahrullail and Yahya, Wira Jazair and Abdul Hamid, Mohd. Kameil and W. N., Fawwaz (2012) Wear characteristic of RBD palm olein using four-ball tribotester. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 991-996. ISBN 978-073541032-9

Sanusi, Nurulhanis Ahmad (2012) Purification of wild type fibrinolytic enzyme from Bacillus SP. isolated from fermented food. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saqr, Khalid M. and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin (2012) Highly-resolved large eddy simulation of the nonreacting flow in an asymmetric vortex combustor. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 400-408. ISBN 978-073541032-9

Saqr, Khalid M. and Kassema, Hassan I. and Aly, Hossam S. and Wahid, Mazlan Abdul (2012) Computational study of decaying annular vortex flow using the R-epsilon/K-epsilon turbulence model. Applied Mathematical Modelling, 36 (10). pp. 4652-4664. ISSN 0307-904X

Shahsavari, Rouzbeh (2012) Multi-objective optimization using differential evolution for dynamic model structure selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamohammadi, Mehdi (2012) Determination of influencing factors on service system improvement using AHP and QFD tools. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shanan, Essam Jassim (2012) Partial transient liquid phase diffusion bonding of stainless steel (SS304) and metal matrix composite (AL/MG2SI) by using aluiminium interlayer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sharif, Safian (2012) Direct investment casting via multijet modelling and fused deposition modelling patterns. In: The 15th International Conference on Advances in Materials and Processings Technologies (AMPT 2012), 23-26 September 2012, Wollonggong, Australia.

Sharif, Safian and Akhavan Farid, Ali and Idris, Mohd. Hasbullah (2012) Tool life prediction model of uncoated carbide tool in high speed drilling of Al-Si alloy using response surface methodology. International Journal of Surface Science and Engineering, 6 (1-2). pp. 112-121. ISSN 1749-785X

Sharif, Safian and Yahya, Mohd. Yazid (2012) Performance evaluation of carbide tools while drilling CFRP/ metal stacks. In: The 2nd International Conference on Applied Mechanics and Manufacturing Technology, (ICAMMT 2012), 14-15 August, 2012, Jakarta, Indonesia.

Shayganpour, A. and Idris, Mohd. Hasbullah and Sudin, Izman and Farahany, S. (2012) Effects of pouring temperature and slurry viscosity on heat transfer and surface roughness in lost foam casting. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 And 2. American Institute of Physics, Maryland, New York, pp. 1264-1270. ISBN 978-073541032-9

Sheldareh, A. A. and Safdari, A. and Pourtousi, M. and Che Sidik, Nor Azwadi (2012) Prediction of particle dynamics in lid-driven cavity flow. International Review on Modelling and Simulations, 5 (3). pp. 1344-1347. ISSN 1974-9821

Shirazifard, Shahin Hamtaiepour (2012) Evaluating the effect of pretreatment parameters on cobalt chromium molybdenum alloy prior to PVD coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shirdar, Mostafa Rezazadeh (2012) Effect of pretreatment parameters on surface roughness and cobalt removal of tungsten carbide before diamond coating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sim, Jia Siang (2012) Evaluation of impressed current cathodic protection for underground pipeline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suhaimi, Mohd. Azlan (2012) Generic mathematical representation for a machining tool path. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, O. and Saharuddin, A. H. and Kader, Abd. Saman (2012) Human reliability analysis (HRA) emanating from use of technology for ships navigating within coastal area. African Journal of Business Management, 6 (10). pp. 3602-3612. ISSN 1993-8233

Sulaiman, O. O. and Wan Nik, W. B. and Saharuddin, A. H. and Abd. Kader, Ab. Saman (2012) Study of packing density and temperature on the oil sorption capacity of packed local kapok fiber as bio-oil spill absorbent. Biosciences Biotechnology Research Asia, 9 (1). pp. 53-61. ISSN 0973-1245

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaludd, Hishamuddin and Abd. Rahman, Roslan and Burhaumudin, Mohammad Safwan (2012) Groundhook control of semi-active suspension for heavy vehicle. International Journal of Research in Engineering and Technology, 1 (3). pp. 146-152. ISSN 2277-4378

Sulaimon, Shodiya and Abdulaziz, Azhar and Darus, Amer Nordin (2012) Improved refrigerant characteristics flow predictions in adiabatic capillary tube. Research Journal of Applied Sciences, Engineering and Technology, 4 (13). pp. 1922-1927. ISSN 2040-7467

Sumeru, K. and Nasution, H. and Ani, Farid Nasir (2012) A review on two-phase ejector as an expansion device in vapor compression refrigeration cycle. Renewable and Sustainable Energy Reviews, 16 (7). pp. 4927-4937. ISSN 1364-0321

Supriyo, Bambang (2012) Energy efficiency of building air conditioning system with artificial intelligent. In: 2nd International Conference On Asset And Facility Management (ICASFAM), 2012.

Supriyo, Bambang (2012) Fuzzy-PID ratio controller of an electro-mechanical continuously variable transmission for automotive application. In: Proceedings of the 2nd International Conference on Sustainable Technology Development, 2012, 2012.

Syahirah, Syarifah and Osman, Kahar and Redzuan, Kamarul and Ngali, Zamani and Hadi, Nasrul (2012) Unsteady pressure fluctuation for internal flow in a cylinder using LES model. In: 4Th International Meeting of Advances in Thermofluids (Imat 2011), Pt 1 and 2. American Institute of Physics, Maryland, New York, pp. 782-788.

Syahrom, Ardiyansyah (2012) Wear prediction of total ankle replacement. In: Proceedings of the International Conference on Design and Concurrent Engineering 2012 (iDECON 2012), 2012.

Syahrom, Ardiyansyah and Abdul Kadir, Mohammed Rafiq and Abdullah, Jaafar and Ochsner, Andreas (2012) Permeability studies of artificial and natural cancellous bone structures. Medical Engineering and Physics, 35 (6). pp. 792-799. ISSN 1350-4533

Syahrullail, S. (2012) Friction characteristic of palm olein at different operating temperature using four-ball tribom. In: The 5th Internationa Meeting on Advances in Thermofluids, November 12, 2012, 2012.

Syahrullail, S. and Wira, J. Y. (2012) The effect of sliding speed on friction and wear of RBD palm olein. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 20-21 November, 2012, Batu Pahat, Johor.

Syahrullail, S. and Wira, J. Y. (2012) Friction characteristics of RBD palm olein using fourball tribotester. In: International conference on mechanical and manufacturing engineering 2012, 20-21 November 2012, Batu Pahat, Johor.

Syed Hassan, Syed Ahmad Helmi and Mohd. Yusof, Khariyah and Mohammad, Shahrin and Abu, Mohd. Salleh and Tasir, Zaidatun (2012) Methods to study enhancement of problem solving skills in engineering students through cooperative problem-based learning. Procedia - Social and Behavioral Sciences, 56 . pp. 737-746. ISSN 1877-0428

T

Taheri, Behrooz (2012) Absorption chiller-design and optimization of absorber and regenerator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tamin, Mohd. Nasir (2012) Extended cohesive zone model for simulation of solder/IMC interface cyclic damage process in Pb-free solder interconnects. In: 35th Int. Electronics Manufacturing Technology Conference (IEMT2012), 6-8 November 2012, Ipoh, Malaysia.

Tamin, Mohd. Nasir (2012) Fatigue failure processes in pb-free solder joints using continuum damage and cohesive zone models. In: 14th Electronics Packaging Technology Conference, 5-7 Dec 2012, Resort World Sentosa, Singapore.

Tang, Ying Ying (2012) A mathematical human resource planning model for a third party logistics company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tohidi, Seyedahmad (2012) Absorption chillr- design and optimization of generator and condenser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tuan Abdul Rahman, Tuan Ahmad Zahidi (2012) Active force vibration control of a flexible structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tuan Kamaruddin, Tengku Nordayana Akma (2012) Self tuning PID controller for idle speed control internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

V

Vaghefinezhad, Sayedmohammadreza and Wong, Kuan Yew (2012) A genetic algorithm approach for solving a flexible job shop scheduling problem. International Journal of Computer Science Issues, 9 (3). pp. 85-90. ISSN 1694-0814

Vaghefinezhad, Sayedmohammadreza and Wong, Kuan Yew (2012) A genetic algorithm approach for solving group technology problem with process plan flexibility. In: Proceedings - 2012 14th International Conference on Modelling and Simulation, UKSim 2012. IEEE, Cambridge, pp. 52-58. ISBN 978-076954682-7

Vaghefinzhad, Sayedmohammadreza (2012) A genetic algorithm approach for solving group technology problem with multiple process routes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vatani, Ashkan (2012) Turbulent nanofluid flow over peiodic grooved channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vilavandran, Alfred Sagayam (2012) Numerical solution of convective heat transfer in a polar cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

VilaVandran, Alfred Sagayam and Darus, Amer Nordin (2012) Study of two-dimensional laminar flow in a polar cavity by Ansys Fluent. In: AIP Conference Proceedings. American Institute of Physics, Maryland, USA, pp. 775-781. ISBN 978-073541032-9

W

Wakhi Anuar, Nur Farah Bazilah (2012) The effect of forging temperature on the properties of biodegradable MG-0.7CA alloy for implant application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Ali, Wan Khairuddin and Nambaraja, Kuberaraaj and Krishnan, Subramaniam (2012) Preparation of rocket grade hydrogen peroxide and catalyst pack for monopropellant rocket thruster. Journal of aerospace Engineering and Technology, 2 (2). pp. 1-8. ISSN 2231-038X

Wan Nik, W. B. and Syahrullail, S. and Rosliza, R. and Rahman, M. M. and Zulkifli, M. F. R. (2012) Corrosion behaviour of aluminium alloy in palm oil methyl ester (B100). Jurnal Teknologi, 58 . pp. 73-76. ISSN 2231-7376

WanNik, W. B. and Ayob, A. F. and Samion, Syahrullail and Masjuki, H. H. and Ahmad, M. F. (2012) The effect of boron friction modifier on the performance of brake pads. International Journal of Mechanical and Materials Engineering, 7 (1). pp. 31-35. ISSN 1823-0334

Wardoyo, Toto Triantoro Budi and Kurniawan, Denni and Izman, Sudin (2012) Effect of process parameters on quality of cold spinned tube head. In: International Conference On Mechanical & Manufacturing Engineering 2012 (ICME 20120), 20-21 November 2012, Batu Pahat, Johor, Malaysia.

Wong, Kuan Yew (2012) Identifying significant factors of brick laying process through design of experiment and computer simulation: a case study. In: World Academy of Science, Engineering and Technology, 2012.

Wong, Kuan Yew (2012) An integrated approach for sustainable supplier selection using fuzzy logic and fuzzy AHP. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 2012.

Wong, Kuan Yew and Komarudin, Komarudin (2012) Parameter tuning of ant system using fuzzy logic controller. International Journal of Operational Research, 15 (2). pp. 125-135. ISSN 1745-7645

Wong, Kuan Yew and Mat Saman, Muhamad Zameri (2012) Review of ERP implementation frameworks for small and medium sized enterprises. In: Proceedings of the 5th International Colloquium on Business & Management ICBM 2012, 9-12 July, 2012, Bangkok, Thailand.

Wong, Kuan Yew and Mat Saman, Muhamad Zameri (2012) The use of multi-agent systems in managing sustainable supply chain. In: International Conference on Mechanical and Manufacturing Engineering (ICME2012), 20-21 November, 2012, Batu Pahat, Johor.

Wong, T. T. and Tang, C. H. H. and Mailah, Musa (2012) Robust active heave compensated winch-driven overhead crane system for load transfer in marine operation. In: ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings. IEEE, New York, USA, pp. 111-116. ISBN 978-145771967-7

Wong, T. T. and Tang, Collin Howe Hing and Mailah, Musa (2012) Winch driven active heave compensation for load transfer in overhead crane system. In: ICIAS 2012 - 2012 4th International Conference on Intelligent and Advanced Systems: A Conference of World Engineering, Science and Technology Congress (ESTCON) - Conference Proceedings. IEEE, New York, USA, pp. 34-39. ISBN 978-145771967-7

Wong, Yng Jeng (2012) Road maintenance management system using geographic information system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Y

Yaakob, Omar (2012) Envisaging a ballast water treatment system from shipboard waste heat. In: International Conference on Maritime Technology 2012 (ICMT2012), 25-28 June, 2012, Harbin, China.

Yaakob, Omar (2012) The promise of marine renewable energy in Malaysia: too good to be true? In: Second Conference for Regional Cooperation in Ocean and Earth Science Research In the South China Sea, 22-26 October, 2012, Kuala lumpur, Malaysia.

Yaakob, Omar and Ahmed Abdel Razak, Yasser Mohamed (2012) Validation study for savonius vertical axis marine current turbine using CFD simulation. In: The 6th Asia-Pacific Workshop on Marine Hydrodynamics (APHydro2012), 3-5 September, 2012, Johor, Malaysia.

Yaakob, Omar and Mohd. Omar, Kamaludin (2012) Satellite altimeter ocean wave heights data in South China Sea. In: 8th International Conference on Marine Technology (MARTEC), 2012, Terengganu, Malaysia.

Yaakob, Omar and Nasirudin, A. and Abdul Ghani, Mohamad Pauzi and Mat Lazim, Tholudin and Abdul Mukti, Mohamad Afifi and Ahmed, Y. M. (2012) Parametric study of a low wake-wash inland waterways catamaran. Scientia Iranica, 19 (3). pp. 463-471. ISSN 1026-3098

Yahaya, Nurulain (2012) Flow behaviour around winglets. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Z

Zainal, Nurul Amira (2012) Numerical simulation of fluids structure interaction (FSI) in asymmetric abdominal aortic aneurysm (AAA) using adina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Mohamad Shukri (2012) Modeling of liquefied natural gas (LNG) evaporation during marine transportation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Mohamad Shukri and Osman, Kahar and Musa, Md. Nor (2012) Boil-off gas formation inside large scale liquefied natural gas (LNG) tank based on specific parameters. Applied Mechanics and Materials, 229-31 . pp. 690-694. ISSN 1662-7482

Zakuan, Norhayati and Mohd Yusof, Sha’ri and Mat Saman, Muhamad Zameri and Mohd. Shaharoun, Awaluddin and Laosirihongthong, Tritos (2012) The moderator effects of ISO/TS16949 certification in Thailand automotive industry. Procedia - Social and Behavioral Sciences, 40 . pp. 141-145. ISSN 1877-0428

Zeinahvazi, Milad (2012) Determination of levels of automation compatible to training of workers in manufacturing industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zeinali, Mohammadjavad (2012) Intelligent robust controller for semi active suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zolfagharian, A. and Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abdul Rahim and Asarry, A. (2012) Suppressing chatter noise in windscreen wiper operation using a robust hybrid controller. International Review of Mechanical Engineering, 6 (3). pp. 630-635. ISSN 1970-8734

This list was generated on Fri Oct 31 04:29:19 2014 MYT.