Items where Division is "Chemical Engineering" and Year is 2012

A-Jalil, S. and Hashim, Haslenda and Hassim, Mimi Haryani and Johari, Anwar (2012) Fugitive emission reduction through optimization. Computer Aided Chemical Engineering, 31 . pp. 485-489. ISSN 1570-7946

Ab. Muis, Zarina (2012) Optimal solar-electricity generation for Iskandar Malaysia. In: 2nd Malaysian International Conference on Trends In Bioprocess Engineering (MICOTriBE 2012), 3-5 Jul 2012, Langkawi, Kedah.

Abang Zaidel, Dayang Norulfairuz and Meyera, Anne S. (2012) Biocatalytic cross-linking of pectic polysaccharides for designed food functionality: structures, mechanisms, and reactions. Biocatalysis And Agricultural Biotechnology, 1 (3). pp. 207-219. ISSN 1878-8181

Abbaszadeh, Sahar and Hassim, Mimi Haryani and Hurme, Markku and Kasmania, Rafizana M. (2012) Computer aided assessment and design of occupationally healthier process during research and development stage. Chemical Engineering Transactions, 26 . pp. 249-254. ISSN 1974-9791

Abd. Hamid, Mohd. Kamaruddin and Abu Bakar, Suraya Hanim and Wan Alwi, Sharifah Rafidah and A. Manan, Zainuddin (2012) Development of a new model-based integrated process design and control for heat exchanger networks. In: 26th Symposium of Malaysian Chemical Engineers (SOMchE-2012) in conjunction with 4th International Conference on Chemical and Bioprocess Engineering (ICCBPE-2012), 21-23 Nov 2012, Kota Kinabalu, Sabah.

Abd. Majid, Fadzilah @ Adibah (2012) Advance embryogenesis and embryotoxicity research using a low cost zebrafish system. In: Conference.

Abd. Majid, Fadzilah @ Adibah and Mukrish, M. H. and Chua, L. S. and Ya'akob, Harisun and Sarmidi, Mohamad Roji (2012) The effects of water and methanolic extracts of Labisia pumila on collagen synthesis in human skin fibroblast (HSF1184) Cells. Regenerative Research, 1 (1). pp. 33-37. ISSN 2232-0822

Abd. Majid, Fadzilah@Adibah (2012) Basic research: aetiology and pathogenesis. In: europerio7, 2012, Autria.

Abd. Manan, Zainuddin and Peng, YenLiew and Wan Alwi, Sharifah Rafidah and Sabev Varbanov, Petar (2012) A numerical analysis for total site sensitivity. In: 11th International Symposium on Process Systems Engineering, 15-19 Jul 2012, Singapore.

Abd. Rahman, Mohd. Redza (2012) Bacterial cellulose-chitosan membrane grafted with theophylline-imprinted copolymer by free radical copolymerization. Masters thesis, Universiti Teknologi Malaysia, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman, Nur Syuhada (2012) Solubility model of palm oil extraction from palm fruit using sub-critical R134a. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Razak, Mohd. Zahidfullah and Arsad, Agus and Rahmat, Abdul Razak and Hassan, Azman (2012) Influence of MMT as reinforcement on rheological behavior, mechanical and morphological properties of recycled PET/ABS thermoplastic nanocomposites. Journal of Polymer Engineering, 32 (2). pp. 177-183. ISSN 0334-6447

Abd. Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan and Hashim, Shahrir and Yahya, Mohd. Yazid (2012) In situ surface modification of natural fiber by conducting polyaniline. Composite Interfaces, 19 (6). pp. 365-376. ISSN 0927-6440

Abd. Razak, Saiful Izwan and Wan Abdul Rahman, Wan Aizan and Yahya, Mohd. Yazid (2012) Electrically conductive nanocomposites of epoxy/polyaniline nanowires doped with formic acid: effect of loading on the conduction and mechanical properties. Nano, 7 (5). ISSN 1793-2920

Abdul Jalil, Aishah and Triwahyono, Sugeng and Yaakob, M. R. and Azmi, Zahra and Sapawe, Norzahir and Kamarudin, Noraziahtulhidayu and Setiabudi, Herma Dina and Nik Jaafar, Nik Fazlin Hiryati and M. Sidik, Saima and Adam, Siti Hazirah and Hameed, Bassim Hamid (2012) Utilization of bivalve shell-treated Zea mays l. (Maize) husk leaf as a low-cost biosorbent for enhanced adsorption of malachite green. Bioresource Technology, 120 . pp. 218-224. ISSN 0960-8524

Abdul Khalil, H. P. S. and Amouzgar, P. and Hassan, A. and Jawaid, M. and Ahmad, F. and Hadiyana, A. and Dungani, Rudi (2012) New approach to oil palm trunk core lumber material properties enhancement via resin impregnation. Journal of Biobased Materials and Bioenergy, 6 . pp. 1-10. ISSN 1556-6560

Abu Bakar, Aznizam and Abdul Ghani, Siti Waqina and Kee, Wee Cheng (2012) Flexural and impact properties of poly (vinyl chloride) and acrylic-impact modified poly (vinyl chloride) composite filled with poly (methyl methacrylate) grafted to oil palm empty fruit bunches. International Journal Of Polymeric Materials, 61 . pp. 263-275. ISSN 0091-4037

Adam, S. H. and Abdul Jalil, Aishah and Triwahyono, Sugeng (2012) Novel removal of water-insoluble disperse dye onto a low-cost adsorbent prepared from tropical fruit waste. Desalination and Water Treatment, 49 . pp. 337-347. ISSN 1944-3994

Adrus, Nadia and Ulbricht, Mathias (2012) Molecularly imprinted stimuli-responsive hydrogels for protein recognition. Polymer (United Kingdom), 53 (20). pp. 4359-4366. ISSN 0032-3861

Adrus, Nadia and Ulbricht, Mathias (2012) Novel hydrogel pore-filled composite membranes with tunable and temperature-responsive size selectivity. Journal of Materials Chemistry, 22 (7). pp. 3088-3098. ISSN 0959-9428

Ahmad, Anuar (2012) Analysis of the fuel properties of palm oil waste for gasification. In: International Science Postgraduate Conference 2012 (ISPC 2012), 27-30 Nov 2012, Johor Bahru, Johor.

Ahmad, Arshad and Soo, Kim Kuang and Ripin, Adnan (2012) Bubble characteristics in ultrasonic-assisted equilibirum system. In: 2012 Conference on Emerging Energy and Process Technology (CONCEPT 2012).

Ahmad, Mazatusziha and Wahit, Mat Uzir and Abdul Kadir, Mohammed Rafiq and Mohd Dahlan, Khairul Zaman (2012) Mechanical, rheological, and bioactivity properties of ultra high-molecular-weight polyethylene bioactive composites containing polyethylene glycol and hydroxyapatite. The Scientitic World Journal, 2013 . ISSN 1537-744X

Ahmad, Mohd. Ridzuan and Nakajima, Masahiro and Kojima, Masaru and Kojima, Seiji and Homma, Michio and Fukuda, Toshio (2012) Instantaneous and quantitave single cells viability determination using dual nanopobe inside ESEM. IEEE Transactions on Nanotechnology, 11 (2). pp. 298-306. ISSN 1536-125X

Ahmad Mutamim, Noor Sabrina and Zainon Noor, Zainura and Abu Hassan, Mohd. Ariffin and Olsson, Gustaf (2012) Application of membrane bioreactor technology in treating high strength industrial wastewater: a performance review. Desalination, 305 . pp. 1-11. ISSN 0011-9164

Ahmad Sharif, Noor Fadzliana (2012) Preparation and characterization of epoxidized natural rubber (ENR-50) toughened polyamide 6/ halloysite nanotube composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ahmad Sharif, Noor Fadzliana and Mohamad, Zurina and Hassan, Azman and Wahit, Mat Uzir (2012) Novel epoxidized natural rubber toughened polyamide 6/halloysite nanotubes nanocomposites. Journal Of Polymer Research, 19 (1). ISSN 1022-9760

Ahmad Zaini, Muhammad Abbas and Che Yunus, Mohd. Azizi and Amano, Yoshimasa and Machida, Motoi (2012) Relationship between helium degassing of cattle-manure-compost adsorbents and copper ions removal. International Journal of Organic Chemistry, 2 . pp. 262-266. ISSN 2161-4695

Ahmed, M. Murtala and Nasri, Noor Shawal and Hamza, D. Usman (2012) Biomass as a renewable source of chemicals for industrial applications. International Journal of Engineering Science and Technology (IJEST), 4 (2). pp. 721-730. ISSN 0975-5462

Akhtar, J. and Saidina Amin, Nor Aishah and Wang, Junjie (2012) Optimization studies for catalytic ozonation of cephalexin antibiotic in a batch reactor. Journal of Water Supply: Research and Technology - AQUA, 61 (7). pp. 413-426. ISSN 0003-7214

Akhtar, Javaid and Saidina Amin, Nor Aishah (2012) A review on operating parameters for optimum liquid oil yield in biomass pyrolysis. Renewable and Sustainable Energy Reviews, 16 (7). pp. 5101-5109. ISSN 1364-0321

Akos, N. I. and Mohamed, R. and Wahit, Mat Uzir and Yussuf, A. A. (2012) Comparative studies of mechanical properties of poly (e-Caprolactone) and poly (lactic acid) blends reinforced with natural fibers. In: Conference.

Al-Dulaimi, A. A. and Hashim, Shahrir (2012) Improving the anti-corrosion properties via surface modification for silicon dioxide by conductive polymer. International Journal of Mechanical and Materials Engineering, 7 (2). pp. 113-118. ISSN 1823-0334

Alam, M. N. H. Z. and Zainal Alam, Muhd. Nazrul Hisham and Gernaey, Krist V. (2012) Overview on design considerations for development of disposable microbiorector prototypes. Jurnal Teknologi (Sciences and Engineering), 59 . pp. 53-60. ISSN 0127-9696

Ali, M. Abbas and Sayeed, M. Abu and Alam, M. Shahinur and Yeasmin, Mst. Sarmina and Mohal Khan, Astaq and Muhamad, Ida Idayu (2012) Characteristics of oils and nutrient contents of nigella sativa linn. and trigonella foenum-graecum seeds. Bulletin Of The Chemical Society Of Ethiopia, 26 (1). pp. 55-64. ISSN 1011-3924

Alias, Hajar and Ngadi, Norzita and Mohd Zainun, Zahira and Hamzah, Nurul Effah (2012) Rheology based on suspension containing titanium dioxide. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 July, 2012, Langkawi, Kedah.

Aly Ibrahim, Amgad Ahmed (2012) Proton conducting membrane by radiation-induced grafting of 1-vinylimidazole onto poly(ethylene-co-tetrafluoro ethylene) film and phosphoric acid doping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Arsad, Nur Husnina (2012) Studies on the oil yield, antioxidant activities and solubility from the extraction of pithecellobium jiringan jack seeds using supercritical carbon dioxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Asgharzadehahmadi, Seyed Ali (2012) Synthesis and characterization of polyacrylamide based hydrogel containing magnesium oxide nanoparticles for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Awad, Hassan M. and Diaz, Richard and Malek, Roslinda A. and Othman, Nor Zalina and Abdul Aziz, Ramlan and El Enshasy, Hesham Ali (2012) Efficient production process for food grade acetic acid by acetobacter aceti in shake flask and in bioreactor cultures. E-Journal of Chemistry, 9 (4). pp. 2275-2286. ISSN 0973-4945

Azarpour, Abbas and Zahedi, Gholamreza (2012) Hybrid dynamic modeling of 4-CBA hydrogenation fixed-bed catalytic reactor of PTA production plant. Computer Aided Chemical Engineering, 31 . pp. 1667-1671. ISSN 1570-7946

Azarpour, Abbas and Zahedi, Gholamreza (2012) Performance analysis of crude terephthalic acid hydropurification in an industrial trickle-bed reactor experiencing catalyst deactivation. Chemical Engineering Journal, 209 . pp. 180-193. ISSN 1385-8947

Bagheri, Mehdi and Ghaffar Borhani, Tohid Nejad and Zahedi, Gholamreza (2012) Estimation of flash point and autoignition temperature of organic sulfur chemicals. Energy Conversion And Management, 58 . pp. 185-196. ISSN 0196-8904

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab and Jamili, Ahmad (2012) Estimation of crude oil salt content using a simple predictive tool approach. Journal of Petroleum Science and Engineering, 96-97 . pp. 68-72. ISSN 0920-4105

Bahadori, Alireza and Zahedi, Gholamreza and Zendehboudi, Sohrab and Jamili, Ahmad (2012) Estimation of the effect of biomass moisture content on the direct combustion of sugarcane bagasse in boilers. International Journal of Sustainable Energy . ISSN 1478-6451

Bakeri, Gh. and Ismail, Ahmad Fauzi and Rahimnejad, M. and Matsuura, T. and Rana, D. (2012) The effect of bore fluid type on the structure and performance of polyetherimide hollow fiber membrane in gas-liquid contacting processes. Separation and Purification Technology, 98 . pp. 262-269. ISSN 1383-5866

Balakrishnan, Harintharavimal and Hassan, Azman and Isitman, Nihat Ali and Kaynak, Cevdet (2012) On the use of magnesium hydroxide towards halogen-free flame-retarded polyamide-6/polypropylene blends. Polymer Degradation and Stability, 97 (8). pp. 1447-1457. ISSN 0141-3910

Balakrishnan, Harintharavimal and Masoumi, Iman and A. Yussuf, Abdirahman and Imran, Muhammad and Hassan, Azman and Wahit, Mat Uzir (2012) Ethylene copolymer toughened polylactic acid nanocomposites. Polymer-Plastics Technology And Engineering, 51 (1). pp. 19-27. ISSN 0360-2559

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bee, Soo-Tueen and Hassan, Azman and Ratnam, Chantara T. and Tee, Tiam-Ting and Lee, Tin Sin (2012) Effects of montmorillonite on the electron beam irradiated alumina trihydrate added polyethylene and ethylene vinyl acetate nanocomposite. Polymer Composites, 33 (11). pp. 1883-1892. ISSN 0272-8397

Bee, Soo Tuen and Hassan, Azman and Abu Bakar, Aznizam (2012) Mechanical properties of talc- and (calcium carbonate)-filled poly(vinyl chloride) hybrid composites. Journal Of Vinyl And Additive Technology, 18 (2). pp. 76-86. ISSN 1083-5601

Benhelal, Emad and Zahedi, Gholamreza and Hashim, Haslenda (2012) A novel design for green and economical cement manufacturing. Journal of Cleaner Production, 22 (1). pp. 60-66. ISSN 0959-6526

Bhatti, Inamullah (2012) Separation of carbon dioxide from natural gas by emulsion liquid membrane in rotating disc contractor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Bhutto, A. W. and Bazmi, A. A. and Zahedi, G. (2012) Greener energy: issues and challenges for Pakistan-hydel power prospective. Renewable And Sustainable Energy Reviews, 16 (5). pp. 2732-2746. ISSN 1364-0321

Chan, Mieow Kee and Idris, Ani (2012) Modification of cellulose acetate membrane using monosodium glutamate additives prepared by microwave heating. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2115-2123. ISSN 1226-086X

Chang, Hui Quin (2012) Preparation of water-in-oil-in-water emulsions by repeated premix cellulose acetate membrane emulsification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chelliah, Kumutha (2012) Random mutagenesis of NS1 protein of influenza a H1N1 and docking of RNA aptamers to wild type and mutant NSI proteins. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Cheng, Shu Ian and Stuckey, David C. (2012) Protein precipitation using an anionic surfactant. Process Biochemistry, 47 (5). pp. 712-719. ISSN 1359-5113

Chezghani, Mohsen (2012) A graphical method for simultaneous targeting and design of multiple utility systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Chong, Kok Chung and Lai, Soon Onn and Lee, K. M. and Ooi, Boon Seng (2012) A study of computational fluid dynamics on membrane module in membrane distillation. In: ICIMTR 2012 - 2012 International Conference on Innovation, Management and Technology Research. IEEE, New York, USA, pp. 174-178. ISBN 978-146730655-3

Dahalan, Farrah Aini (2012) Development and characterization of phototrophic aerobic granular sludge. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Daud, Noorol Jannah (2012) Carbon footprint calculator for a typical campus in Malaysia using life cycle assessment approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abang Zaidel, Dayang Norulfairuz and Chronakis, Ioannis S. and Meyer, Anne S. (2012) Enzyme catalyzed oxidative gelation of sugar beet pectin: kinetics and rheology. Food Hydrocolloids, 28 (1). pp. 130-140. ISSN 0268-005X

Dehbari, Nazila (2012) The effects of kenaf core on properties of polylactic acid biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Dehghani, Alireza (2012) Mechanical and thermal properties of Montmorillonite filled date palm leaf fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Deirram, Nayeleh (2012) Hydrolysis degradation of polycarbonate by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Devanai, Kannan (2012) Modification of polyethersulfone incorporated with polyvinylpyrrolidone - iodine via phase inversion and ultraviolet photo grafting for antibacterial applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

El-Hefian, Esam A. and Nasef, Mohamed Mahmoud and Khan, Rashid Atta and Yahaya, Abdul Hamid (2012) Characterization of aqueous solutions of mixture of chitosan and agar. Journal Of The Chemical Society Of Pakistan, 34 (1). pp. 127-130. ISSN 0253-5106

El-Hefian, Esam Abdulkader and El Sayed Nasef, Mohamed Mahmoud and Yahaya, Abdul Hamid (2012) Preparation and characterization of chitosan/agar blended films: part 1. chemical structure and morphology. E-Journal Of Chemistry, 9 (3). pp. 1431-1439. ISSN 0973-4945

El-Hefian, Esam Abdulkader and El Sayed Nasef, Mohamed Mahmoud and Yahaya, Abdul Hamid (2012) Preparation and characterization of chitosan/agar blended films: part 2. thermal, mechanical, and surface properties. E-Journal Of Chemistry, 9 (2). pp. 510-516. ISSN 0973-4945

Eldin, M. S. M. and El Enshasy, H. A. and El Sayed, M. and El Sayed, S. and Haroun, B. and Hassan, E. A. (2012) Covalent immobilization of penicillin g acylase onto chemically activated surface of poly(vinyl chloride) membranes for 6-penicillic acid production from penicillin hydrolysis process i. Optimization of surface modification and its characterization. Journal of Applied Polymer Science, 124 (SUP. 1). E27-E36. ISSN 0021-8995

Elfagaih, Fawzi Mohamed Amin (2012) Catalytic performance and optimization of hydrodesulfurization and naphtha reforming for clean fuels production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Elfghi, F. M. and Amin, N. A. S. (2012) Optimization of hydrodesulfurization activity in the hydrotreating process: canonical analysis and the combined application of factorial design and response surface methodology. Reaction Kinetics, Mechanisms and Catalysis, 108 (2). pp. 1-20. ISSN 1878-5190

Esawy, Mona A. and Mansour, Sara H. and Ahmed, Eman F. and Hassanein, Naziha M. and El-Enshasy, Hesham A. (2012) Characterization of extracellular dextranase from a novel halophilic bacillus subtilis NRC-B233B a mutagenic honey isolate under solid state fermentation. E-Journal Of Chemistry, 9 (3). pp. 1494-1510. ISSN 0973-4945

Faisal Ghazali, Mohd. Nazlee (2012) Cellulose degradation and electricity generation using Microbial Fuel Cell (MFC) by locally isolated gram negative bacillus. In: Malaysian International Conference on Trends in Bioprocess Engineering (MICOTriBE) 2012, 3-5 Jul 2012, Langkawi, Kedah.

Fauzi, Mohd. Iqram (2012) Growth of U937 cell in static and suspension culture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Fun, Hoong-Kun and Tze, Shyang Chia and Mahesh, Padaki and Isloor, Arun M. and Ismail, Ahmad Fauzi (2012) (2E)-3-(6-Meth­oxy­naphthalen-2-yl)-1-[4-(methyl­sulfan­yl)phen­yl]prop-2-en-1-one. Acta Crystallographica Section E-Structure Reports Online, 68 (7). pp. 2277-2278. ISSN 1600-5368

Ghanbari, Taravat (2012) Effect of coupling agent and binder in kenaf paper on the mechanical and morphological properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Ghodsiyeh, Danial (2012) Optimization of machining parameters while wedming titanium alloy (T16AL4V). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

H'ng, Wei Chang (2012) Optimization of high cell mass cultivation of Rhizobium trifolii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) Impact of metal oxide nanoparticles on oral release properties of ph-sensistive hydrogel nanocomposites. International Journal of Biological Macromolecules, 50 . pp. 1334-1340. ISSN 0141-8130

Hamid, Yasin (2012) Mechanical, morphological and water absorption properties of waste Eurycoma Longifolia fiber/montmorillonite reinforced poly (vinyl chloride) hybrid composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hamzah, Fazlena (2012) Simultaneous saccharification and fermentation of microwave - alkali pre-treated oil palm empty fruit bunch fiber for lactic acid production. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hasanudin, Redza Shah Azmeer (2012) Hydrogen production from catalytic steam reforming of acetic acid with nickel/cobalt supported by lanthanum (III) oxide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Optimization of large-scale rainwater harvesting system using mixed integer linear programming. In: 2nd International Conference on Water Resources (ICWR 2012), 5-9 Nov 2012, Langkawi, Kedah.

Hassan, Azman and Mohd. Yusoff, Noor Izyan Syazana and Abu Bakar, Aznizam (2012) Effect of poly (methyl methacrylate)-grafted-talc content on mechanical properties and thermal degradation of poly (vinyl chloride) composites. Journal of Polymer Engineering, 32 . pp. 275-282. ISSN 0334-6447

Hassan, Azman and Ratnam, Chantara Thevy and Akbari, Abozar and Ngoo, Kea Hing (2012) Mechanical and thermal properties of ABS/PVC composites: effect of particles size and surface treatment of ground calcium carbonate. Polymer - Plastics Technology And Engineering, 51 (5). pp. 473-479. ISSN 0360-2559

Hassan, Mohamud Abukar (2012) Optimization of maximum demand of electrical energy system using distributed generation technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassim, Mimi Haryani and Hanafi, Noor Hasnizam (2012) Current status and future direction of inherently healthier design in Malaysia. Energy Procedia, 14 . pp. 1939-1944. ISSN 1876-6102

Hassim, Mimi Haryani and Hurme, M. and Aziz, N. N. N. A. (2012) Computer aided estimation of fugitive emission rates and occupational air concentration in process design. Computer Aided Chemical Engineering, 30 . pp. 76-80. ISSN 1570-7946

Hassim, Mimi Haryani and Hurme, Markku and Amyotte, Paul R. and Khan, Faisal I. (2012) Fugitive emissions in chemical processes: the assessment and prevention based on inherent and add-on approaches. Journal of Loss Prevention in the Process Industries, 25 (5). pp. 820-829. ISSN 0950-4230

Hezaveh, H. and Muhamad, I. I. (2012) The effect of nanoparticles on gastrointestinal release from modified ĸ-carrageenan nanocomposite hydrogels. Carbohydrate Polymers, 89 (1). pp. 138-145. ISSN 0144-8617

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) The effect of nanoparticles on gastrointestinal release from modified K-carrageenan nanocomposite hydrogels. Carbohydrate Polymers, 89 (1). pp. 138-145. ISSN 0144-8617

Hezaveh, Hadi and Muhamad, Ida Idayu (2012) Effect of natural cross-linker on swelling and structural stability of kappa-carrageenan/hydroxyethyl cellulose pH-sensitive hydrogels. Korean Journal of Chemical Engineering, 29 (11). pp. 1647-1655. ISSN 0256-1115

Hezaveh, Hadi and Muhamad, Ida Idayu and Noshadi, Iman and Fen, Lim Shu and Ngadi, Norzita (2012) Swelling behaviour and controlled drug release from cross-linked kappa-carrageenan/NaCMC hydrogel by diffusion mechanism. Journal of Microencapsulation, 29 (4). pp. 368-379. ISSN 0265-2048

Ho, W. S. and Hashim, Haslenda and Hassim, Mimi Haryani and Ab. Muis, Zarina (2012) Design of distributed energy system through electric system cascade analysis (ESCA). Applied Energy, 99 . pp. 309-315. ISSN 0306-2619

Hussain, Mohd. Azlan and Abdul Manan, Zainuddin and Aziz, Norashid (2012) Recent developments on PSE education and research in Malaysia. Computer Aided Chemical Engineering, 31 . pp. 70-74. ISSN 1570-7946

Hussein, Shwan Hassan (2012) Nystrom method for solving non-uniquely solvable interior Riemann-Hilbert problem on region with corners via integral equation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ibnu Rasid, Elda Nurafnie (2012) Production of astaxanthin from microalgae. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Idham, Zuhaili and Muhamad, Ida Idayu and Mohd. Setapar, Siti Hamidah and Sarmidi, Mohd. Roji (2012) Effect of thermal processes on roselle anthocyanins encapsulated in different polymer matrices. Journal Of Food Processing And Preservation, 36 (2). pp. 176-184. ISSN 0145-8892

Idris, Ani (2012) Effect of photoperiod on the growth of unicellular microalgae nannochloropsis sp. In: The 2012 International Conference On Agriculturel, Food And Biological Engineering (ICAFBE 2012), 2012.

Idris, Ani and Bukhari, Attaullah and Mohd. Yusof, Noordin and Tan, K. G. (2012) A simultaneous cooling and dielectric heating: an advanced technology to improve the yield of lactides. In: Progress in Electromagnetics Research Symposium, PIERS 2012 Kuala Lumpur.

Idris, Ani and Bukhari, Attaullah (2012) Immobilized candida antartica lipase b: hydration, stripping off and application in ring opening polyester synthesis. Biotechnology Advances, 30 (3). pp. 550-563. ISSN 0734-9750

Idris, Ani and Bukhari, Attaullah and Mohd. Yusof, Noordin and Tan, K. G. (2012) A simultaneous cooling and dielectric heating: an advanced technology to improve the yield of lactides. Progress in Electromagnetics Research Symposium . pp. 141-145. ISSN 1559-9450

Idris, Ani and Misran, E. and Mohd. Yusof, Noordin (2012) Photocatalytic reduction of Cr(VI) by PVA-alginate encapsulated γFe 2O 3 magnetic beads using different types of illumination lamp and light. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 2151-2156. ISSN 1226-086X

Idris, Ani and Misrana, Effaliza and Hassan, Nursia and Abd. Jalilb, Aishah and Seng, Chan Eng (2012) Modified PVA-alginate encapsulated photocatalyst ferro photo gels for CR(vi) reduction. Journal of Hazardous Materials, 227-22 (15). pp. 309-316. ISSN 0304-3894

Idris, Ani and Mohd. Ismail, Nur Suriani and Hassan, Nursia and Misran, Effaliza and Ngomsik, Audrey Flore (2012) Synthesis of magnetic alginate beads based on maghemite nanoparticles for Pb(II) removal in aqueous solution. Journal of Industrial and Engineering Chemistry, 18 (6). pp. 1582-1589. ISSN 1226-086X

Idris, Ani and Misran, Effaliza and Mohd. Yusof, Noordin (2012) Photocatalytic reduction of CR(VI) by PVA-alginate encapsulated γFe2O3 magnetic beads using different types of illumination lamp and light. Journal Of Industrial And Engineering Chemistry, 18 (6). pp. 2151-2156. ISSN 1226-086X

Ilbeygi, Hamid (2012) Electerochemical study of sulfonated poly ether ether ketone nanocomposite membrane for direct methanol fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Iqbal, Ahmed and Ani, I. and Rajput, Rizwan (2012) Performance of microwave synthesized dual solvent dope solution and lithium bromide adiitives on poly (ethersulfone) membranes. Journal of Chemical Technology and Biotechnology, 87 . pp. 177-188. ISSN 0268-2575

Jaafar, Nur Farhana and Abdul Jalil, Aishah and Triwahyono, Sugeng and Muhd. Muhid, Muhd. Nazlan and Sapawe, Norzahir and Satar, Mohammad Azrul Hisham and Asaari, Hanak (2012) Photodecolorization of methyl orange over α-Fe2O3-supported HY catalysts: the effects of catalyst preparation and dealumination. Chemical Engineering Journal, 191 . pp. 112-122. ISSN 1385-8947

Jalalvandi, Esmat (2012) Polylactic acid/thermoplastic starch/montmorillonite nanocomposite : morphological, tensile properties, water absortion and degradation behavior. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Jalil, A. and Hashim, Haslenda and Hassim, Mimi Haryani and Anwar, J. and Sapiaa, N. A. H. (2012) Fugitive emission reduction using mixed integer linear programming. Energy Procedia, 14 . pp. 1870-1876. ISSN 1876-6102

Jaliliannosrati, Hamidreza (2012) Microwave assisted two step in situ method for biodiesel production from jatropha Curcas L. Seed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamaludin, Azmir (2012) Removal of free fatty acid from crude palm oil using organic solvent nanofiltration (OSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jawaid, Mohammad and Abdul Khalil, H. P. S and Hassan, Azman and Elgorban, Abdallah (2012) Bi-layer hybrid biocomposites : chemical resistant and physical properties. Bioresources, 7 (2). pp. 2344-2355. ISSN 1930-2126

Jeng, Shiun Lim and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Hashim, Haslenda (2012) A review on utilisation of biomass from rice industry as a source of renewable energy. Renewable And Sustainable Energy Reviews, 16 (5). pp. 3084-3094. ISSN 1364-0321

Johari, Anwar and Ahmed, Saeed Isa and Hashim, Haslenda and Habib, Alkali and Mat, Ramli (2012) Economic and environmental benefits of landfill gas from municipal solid waste in Malaysia. Renewable And Sustainable Energy Reviews, 16 (5). pp. 2907-2912. ISSN 1364-0321

Johari, Anwar and Hashim, Haslenda and Mat, Ramli and Alias, Hajar and Hassim, Mimi Haryani and Taib, Mohd. Rozainee (2012) Generalization, formulation and heat contents of simulated MSW with high moisture content. Journal of Engineering Science and Technology, 7 (6). pp. 701-710. ISSN 1823-4690

Johari, Anwar and Hashim, Haslenda and Taib, Rozainee and Mat, Ramli and Jusoh, Mazura (2012) A short note: effects of fludisation number and total air factor on the combustion of municipal solid waste of high moisture content in a fluidised bed. Applied Thermal Engineering, 36 . pp. 403-405. ISSN 1359-4311

Jonet, Mohd. Anuar (2012) Extracellular protein secretion optimization in Escherichia coli by signal peptide mutation and additive supplementation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jusoh, Emiliana R. and Ismail, M. Halim Shah and Abdullah, Luqman C. and Yusof, Robiah and Wan Abdul Rahman, Wan Aizan (2012) Crude palm oil as a bioadditive in polypropylene blown films. Bioresources, 7 (1). pp. 859-867. ISSN 1930-2126

Karim, A. H. and Abdul Jalil, Aishah and Triwahyono, Sugeng and Sidik, S. M. and Kamarudin, N. H. N. and Jusoh, R. and Jusoh, N. W. C. and Hameedc, B. H. (2012) Amino modified mesostructured silica nanoparticles for efficient adsorption of methylene blue. Journal of Colloid and Interface Science, 386 (1). pp. 307-314. ISSN 0021-9797

Karim, Ainul Hakimah and Abd. Jalil, Aishah and Triwahyono, Sugeng and Kamarudin, Nur Hidayatul Nazirah and Muhamad Salleh, Nur Fatien and Ab Aziz, Muhammad Arif (2012) Adsorptive removal of methylene blue in aqueous solution onto mesostructured silica nanoparticles. In: The 5th International Conference on Postgraduate Education (ICPE-5 2012) , 18 & 19 December 2012 , Dewan Sultan Iskandar (DSI), Universiti Teknologi Malaysia ( UTM), Johor Bahru .

Kashinath, Shah Aznie Ariffin and Abdul Manan, Zainuddin and Hashim, Haslenda and Wan Alwi, Sharifah Rafidah (2012) Design of green diesel from biofuels using computer aided technique. Computers & Chemical Engineering, 41 . pp. 88-92. ISSN 0098-1354

Kiakalaieh, Amin Talebian (2012) Optimization and kinetic model for transesterification of waste cooking oil using tungstophosphoric acid catalyst. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Kidam, Kamarizan and Hurme, Markku (2012) Analysis of equipment failures as contributors to chemical process accidents. Process Safety And Environmental Protection, 91 . pp. 61-78. ISSN 0957-5820

Kidam, Kamarizan and Hurme, Markku (2012) Design as a contributor to chemical process accidents. Journal Of Loss Prevention In The Process Industries, 25 (4). pp. 655-666. ISSN 0950-4230

Kidam, Kamarizan and Hurme, Markku (2012) Origin of equipment design and operation errors. Journal of Loss Prevention in the Process Industries, 25 (6). pp. 937-949. ISSN 0950-4230

Kunjirama, Magendran (2012) Adsorption of mercury onto 3-ureidopropyltriethoxysilane grafted empty fruit bunches biosorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Natural Resources Engineering.

Laftah, Waham Ashaier and Hashim, Shahrir (2012) Synthesis, optimization, characterization and agricultural field evaluation of polymer hydrogel composites based on poly acrylic acid and micro-fiber of oil palm empty fruit bunch. International Journal of Plastics Technology, 16 (2). pp. 166-181. ISSN 0972-656X

Lai, Jau Choy (2012) Characterization and ageing studies of plasticized sago pith waste composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Lawal, Musa and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) A systematic method for cost-effective carbon emission reduction in buildings. Journal of Applied Sciences, 12 (11). pp. 1186-1190. ISSN 1812-5654

Lee, Suan Chua and Abdul Rahaman, Norul Liza and Sarmidi, Mohamad Roji and Abdul Aziz, Ramlan (2012) Multi-elemental composition and physical properties of honey samples from Malaysia. Food Chemistry, 135 (3). pp. 880-887. ISSN 0308-8146

Lee, Suan Chua and Alitabarimansor, Meisam and Chew, Tin Lee and Mat, Ramli (2012) Hydrolysis of virgin coconut oil using immobilized lipase in a batch reactor. Enzyme Research, 2012 . pp. 1-5. ISSN 2090-0414

Liew, Peng Yen and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin (2012) A numerical technique for total site sensitivity analysis. Applied Thermal Engineering, 40 . pp. 397-408. ISSN 1568-4946

Lim, Jeng Shun and Hashim, Haslenda and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2012) Optimal design of a rice mill utility system with rice husk logistic network. Industrial And Engineering Chemistry Research, 51 (1). pp. 362-373. ISSN 0888-5885

Lingli, Deng and Cheng, Kian Kai and Jiyang, Dong and Julian, L. Griffin and Zhong, Chen (2012) Non-negative principal component analysis for NMR-based metabolomic data analysis. Chemometrics and Intelligent Laboratory Systems, 118 . pp. 51-61. ISSN 0169-7439

M. S., Liza and Abdul Rahmana, Rozlin and A. Hamid, Ahmed Mostafa (2012) Supercritical fluid extraction of bioactive flavonoid from strobilanthes crispus (pecah kaca) and its comparison with solvent extraction. International Food Research Journal, 19 (2). pp. 503-508. ISSN 1985-4668

Low, K. O. and Jonet, M. A. and Ismail, N. F. and Illias, R. M. (2012) Optimization of a bacillus sp signal peptide for improved recombinant protein secretion and cell viability in escherichia coli is there an optimal signal peptide design? Bioengineered Bugs, 3 (6). pp. 334-338. ISSN 1949-1018

Madadi Ardekani, Sara (2012) Mechanical and thermal properties of Montmorillonite filled newspaper fiber reinforced recycled polyethylene terephthalate nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahmoudian, Shaya and Wahit, Mat Uzir and Muhammad Imran, Muhammad Imran and Ismail, Ahmad Fauzi and Balakrishnan, Harintharavimal (2012) A facile approach to prepare regenerated cellulose/graphene nanoplatelets nanocomposite using room-temperature ionic liquid. American Scientific Publications, 12 . pp. 5233-5239. ISSN 1533-4880

Mahmoudin, Shaya and Wahit, Mat Uzir and Ismail, Ahmad Fauzi and Yussuf, Abdirahman Ali (2012) Preparation of regenerated cellulose/montmorillonite nanocomposite films via ionic liquids. Carbohydrate Polymers, 88 (4). pp. 1251-1257. ISSN 0144-8617

Manan, Z. A. and Alwi, S. R. W. (2012) Holistic and versatile process integration framework for maximising resource efficiency. Chemical Engineering Transactions, 29 . pp. 55-60. ISSN 1974-9791

Mansourizadeh, A. and Ismail, Ahmad Fauzi (2012) Influence of membrane morphology on characteristics of porous hydrophobic PVDF hollow fiber contactors for CO2 stripping from water. Desalination, 287 . pp. 220-227. ISSN 0011-9164

Marandi, Reza and Hashim, Shahrir and Zahedi, Gholamreza (2012) Hydrodynamic and heat transfer modeling of polydisperse fluidized bed olefin polymerization reactors. Computer Aided Chemical Engineering, 30 . pp. 1053-1057. ISSN 1570-7946

Mat, R. and Samsudin, Rubyatul Adawiyah and Mohamed, Mahadhir and Johari, Anwar (2012) Solid catalysts and their application in biodiesel production. Bulletin of Chemical Reaction Engineering and Catalysis, 7 (2). pp. 142-149. ISSN 1978-2993

Mazila Ramli, Aizi Nor (2012) Molecular, enzymatic and structural analysis of a novel chitinase from Glaciozyma antarctica PI12 for cold adaptation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Md. Salleh, Liza (2012) Bioactive compounds from quercus infectoria (manjakani) galls extract and their effects on antioxidant and antibacterial activities. In: Conference.

Md. Sarip, Mohd. Sharizan (2012) Subcritical water extraction of 6-gingerol and 6-shogaol from zingiber officinale. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mili, Norlisa (2012) Formulation of emulsion liquid membrane for reactive dye removal from aqueous solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Moazeni, Nima and Mohamad, Zurina and Abdul Manan, Siti Najihah and Ngadi, Norzita (2012) Anticorrosion epoxy coating enriched with nanozinc and Montmorillonite (MMT). In: National Symposium on Polymeric Materials 2012 (NSPM 2012).

Mohamad, Zurina (2012) The effect of rice bran concentration on the properties of polyethylene/rice bran film. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Mohamad, Zurina (2012) The effects of carbon black contents in epoxy coating filled hybrid fillers on corrosion resistance. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Mohamad, Zurina (2012) Thermal properties and morphology of ethylene vinyl acetate/ epoxidized natural rubber/ halloysite nanotube (EVA/ENR-50/HNTs) nanocomposites. In: National Symposium on Polymeric Materials 2012 (NS 2012).

Mohamad Fuzi, Siti Fatimah Zaharah and Mahadi, Nor Muhammad and Md. Jahim, Jamaliah and Abd. Murad, Abdul Munir and Abu Bakar, Farah Diba and Jusoh, Mazura and A. Rahman, Roshanida and Md. Illias, Rosli (2012) Development and validation of a medium for recombinant endo-β-1,4- xylanase production by kluyveromyces lactis using a statistical experimental design. Annals of Microbiology, 62 (1). pp. 283-292. ISSN 1590-4261

Mohamed Amin, Mohamed Afizal (2012) Development of sulfonation poly ether ether ketone membrane for microbial fuel cell application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohamed Esivan, Siti Marsilawati (2012) Prediction of lactic acid concentration using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohammad Fauzi, Ahmad Hafiidz and Saidina Amin, Nor Aishah (2012) An overview of ionic liquids as solvents in biodiesel synthesis. Renewable and Sustainable Energy Reviews, 16 (8). pp. 5770-5786. ISSN 1364-0321

Mohd. Muji, Siti Zarina (2012) Optical tomography for solid gas measurement using mixed projection. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Nawi, Norazlina (2012) Encapsulation of anthocyanins from Ipomoea Batatas using microwave drying. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Rosnan, Rizuan (2012) Rheological, mechanical, morphological and thermal properties ofr ecycled poly (ethylene terephthalate)- polythylene filled montmorillonite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohd. Setapar, Siti Hamidah and Mat, Hanapi and Mohamad Aziz, Siti Norazimah (2012) Kinetic study of antibiotic by reverse micelle extraction technique. Journal Of The Taiwan Institute Of Chemical Engineers, 43 (5). pp. 685-695. ISSN 1876-1070

Mohd. Setapar, Siti Hamidah and Mohamad Aziz, S. N. and Harun, N. H. and Mohd. Azizi, C. Y. (2012) Review on the extraction of biomolecules by biosurfactant reverse micelles. APCBEE Procedia, 3 . pp. 78-83. ISSN 1022-6680

Mohd. Setapar, Siti Hamidah and Mohamad Aziz, Siti Norazimah and Harun, Noor Hafiza and Hussin, S. H. (2012) Reverse micelle liquid-liquid extraction of a pharmaceutical product. Advanced Materials Research, 545 . pp. 240-244. ISSN 1022-6680

Mohd. Sueb, Mohd. Shafiq (2012) Efficient cultivation of Kluyveromyces Lactics in high cell density culture in fed-batch cultivation system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mohidem, Nur Atikah and Mat, Hanapi (2012) Catalytic activity and stability of laccase entrapped in sol-gel silica with additives. Journal of Sol-Gel Science and Technology, 61 (1). pp. 96-103. ISSN 0928-0707

Mohidem, Nur Atikah and Mat, Hanapi (2012) The catalytic activity enhancement and biodegradation potential of free laccase and novel sol-gel laccase in non-conventional solvents. Bioresource Technology, 114 . pp. 472-477. ISSN 0960-8524

Mohy Eldin, Mohamed S. and El Enshasy, Hesham and Hassan, Enas A. and M. Haroun, Bakry and Hassan, Mohamed (2012) Covalent immobilization of penicillin G acylase onto amine-functionalized PVC membranes for 6-APA production from penicillin hydrolysis process. Ii. Enzyme immobilization and characterization. Journal Of Applied Polymer Science, 125 (5). pp. 3820-3828. ISSN 0021-8995

Mook, W. T. and Chakrabarti, M. H. and Aroua, M. K. and Khan, G. M. A. and Alia, B. S. and Islam, M. S. and Abu Hassan, M. A. (2012) Removal of total ammonia nitrogen (TAN), nitrate and total organic carbon (TOC) from aquaculture wastewater using electrochemical technology: a review. Desalination, 285 . pp. 1-13. ISSN 0011-9164

Moslehyani, Ali (2012) Silver ion exchange fillers incoporated with mixed matrix membrane for antibacterial application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Muhamad, Ida Idayu and Zahan, Norhayati (2012) Production of bio-fiber cement using formulated bacterial cellulose blends as additive. In: 3rd International Biotechnology and Biodiversity Conference & Exhibition (BIOJOHOR 2012).

Muhammad Munir, Sadiq and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2012) Holistic carbon planning for industrial parks: a waste-to-resources process integration approach. Journal of Cleaner Production, 33 . pp. 74-85. ISSN 0959-6526

Muhammad Sani, Shehu (2012) Optimization of sludge disintegration from IWK-bunus sewage treatment plant for enhanced biogas yield. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mustapha, Mahfuzah (2012) Shelf life of ready made paste using sorption isotherm and thermal colour degradation study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

N. K., Abbood and Z. A., Manan and S. R. W., Alwi (2012) A combined numerical and visualization tool for utility targeting and heat exchanger network retrofitting. Journal Of Cleaner Production, 23 (1). pp. 1-7. ISSN 0959-6526

Naghib, Syed Danial (2012) Preparation and characterization of magnetic nanoparticles immobilized in acrylamide based hydrogels for metal extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Nasef, Mohamed Mahmoud and Güven, Olgun (2012) Radiation-grafted copolymers for separation and purification purposes: status, challenges and future directions. Progress in Polymer Science, 37 (12). pp. 1597-1656. ISSN 0079-6700

Nasef, Mohamed Mahmoud and Shamsaei, Ezzatollah and Ghassemi, Payman and Aly, Amgad Ahmed and Yahaya, Abdul Hamid (2012) Optimization strategies for radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetraflouroethene) film using box-behnken design. Radiation Physics And Chemistry, 81 (4). pp. 437-444. ISSN 0969-806X

Ng, Wendy Pei Qin and Lam, Hon Loong and Ng, Foo Yuen and Kamal, Mustafa and Lim, Joseph Heng Ee (2012) Waste-to-wealth: green potential from palm biomass in Malaysia. Journal of Cleaner Production, 34 . pp. 57-65. ISSN 0959-6526

Ng, Wendy Pei Qin and Ng, Rex T. L. and Lam, Hon Loong and Abdul Aziz, Mustafa Kamal and Ng, Ern Huay and Ng, Denny K. S. (2012) Biomass corridor synthesis for Malaysia green energy supply chain. Chemical Engineering Transactions, 29 . pp. 703-708. ISSN 1974-9791

Ngadi, N. and Aziz, N. I. A. and Razak, S. F. M. (2012) Textile wastewater treatment using hybrid chitosan-polyacrylamide flocculant. Jurnal Teknologi (Sciences and Engineering), 59 . pp. 61-65. ISSN 0127-9696

Ngadi, Norzita and A., John and F., Conan and M., Ken (2012) QCM-D study of a-lactalbumin adsorption on stainless steel surface coated with poly ethylene glycol (PEG) nanofilms. International Journal of Chemical and Environmental Engineering, 3 (3). pp. 167-171. ISSN 2078-0737

Ngadi, Norzita and Alias, Hajar and Ishak, Siti Aktar (2012) Effects of feedstock and catalyst concentration on biodiesel production. Jurnal Teknologi, 57 . pp. 23-32. ISSN 0127-9696

Ngadi, Norzita and Nosri, Aisyah (2012) Photocatalytic oxidation of methyl orange dye over titania nanocatalyst. Jurnal Teknologi, 57 . pp. 33-40. ISSN 0127-9696; 2180-3722(online)

Ngadi, Norzita and Y., Yahida (2012) Novel biodegradable polymeric flocculant based on Kenaf for heavy metal removal. International Journal of Chemical and Environmental Engineering, 3 (3). pp. 172-174. ISSN 2078-0737

Nik Abd. Rahman, Nik Norulaini and Zhari, Salman and Sarker, Md. Zaidul Islam (2012) Profile of parkia speciosa hassk metabolites extracted with sfe using FTIR- PCA method. Journal Of The Chinese Chemical Society, 59 (4). pp. 507-514. ISSN 0009-4536

Nilghaz, Azadeh and Wicaksono, Dedy H.B. and Gustiono, Dwi and Abdul Majid, Fadzilah Adibah and Supriyanto, Eko and Abdul Kadir, Mohammed Rafiq (2012) Flexible microfluidic cloth-based analytical devices using a low-cost wax patterning technique. Lab On A Chip, 12 (1). pp. 209-218. ISSN 1473-0197

Noshadi, Imam and Saidina Amin, Nor Aishah and Parnasb, Richard S. (2012) Continuous production of biodiesel from waste cooking oil in a reactive distillation column catalyzed by solid heteropolyacid: optimization using response surface methodology (RSM). Fuel, 94 (1). pp. 156-164. ISSN 0016-2361

O. Yusuf, Rafiu and Noor, Zainura Zainon and H. Abba, Ahmad and Abu Hassan, Mohd. Ariffin and Mohd. Din, Mohd. Fadhil (2012) Greenhouse gas emissions: quantifying methane emissions from livestock. American Journal of Engineering and Applied Sciences, 5 (1). pp. 1-8. ISSN 1941-7020

Othman, Norhayani and Jazrawi, B. and Mehrkhodavandi, P. and Hatzikiriakos, S. G. (2012) Rheology and melt fracture of poly(lactides). In: Annual Technical Conference - ANTEC, Conference Proceedings. Society of Plastics Engineers (SPE), Newtown, USA, pp. 1170-1174. ISBN 978-162276083-1

Che Pa, Nasrul Fikry and Ahmed, Iqbal and Mohd. Ghazali, Mohd. Nawawi and Wan Abd. Rahman, Wan Aizan (2012) Influence of polystyrene on PDMS IPNS blend membrane performance. Separation Science And Technology, 47 (4). pp. 562-576. ISSN 0149-6395

Pandian, Santha and Hassim, Mimi Haryani and Hurme, Markku (2012) Computer aided assessment of occupationally healthier processes during research and development stage. Computer Aided Chemical Engineering, 31 . pp. 270-274. ISSN 1570-7946

Peng, Yen Liew and Wan Alwi, Sharifah Rafidah and Varbanov, Petar Sabev and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2012) A numerical analysis for total site sensitivity. Computer Aided Chemical Engineering, 31 . pp. 560-564. ISSN 1570-7946

Phang Abdullah, Fatin Aliah and Mohd. Yusof, Khairiyah and Syed Hassan, Syed Helmi and Hassim, Mimi H. (2012) Engineering students' perception on learning through cooperative problem-based learning (CPBL) for the first time. In: 2012 ASEE Inaugural International Forum, 9 - 10 June 2012, Riverwalk San Antonio.

Poh, Shiang Shiew (2012) Enzymatic, antioxidant activities and stability of bromelain-polyphenol precipitate in pineapple juice. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Pouralinazar, Farzad and Che Yunus, Mohd. Azizi and Zahedi, Gholam Reza (2012) Pressurized liquid extraction of Orthosiphon stamineus oil: experimental and modeling studies. Journal Of Supercritical Fluids, 62 . pp. 88-95. ISSN 0896-8446

Qader, S. W. and Abdulla, M. A. and Chua, L. S. and Sirat, H. M. and Hamdan, S. (2012) Pharmacological mechanisms underlying gastroprotective activities of the fractions obtained from polygonum minus in sprague dawley rats. International Journal Of Molecular Sciences, 13 (2). pp. 1481-1496. ISSN 1422-0067

R., Dayana Amira and A. Rahman, Roshanida and Md. Illias, Rosli (2012) Effects of xylanase and cellulase production during composting of EFB and POME using fungi. International Journal of Engineering and Applied Sciences, 6 (8). pp. 292-295. ISSN 2010-3999

Rahaeifard, Mastooreh (2012) Isolation and optimization of biomass production of Trichoderma : a biological control agent against Ganoderma boninense. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rahmat, Abdul Razak and Lim, P. S. and Lee, Tin Sin and Bee, Soo Tueen and Tee, Tiam Ting (2012) The effects of chain extender on viscosity and mechanical properties of poly (buthylene terephthalate) blending with recycled poly (ethylene terephthalate)-glass fiber composite. Journal Of Applied Sciences, 12 (3). pp. 296-300. ISSN 1812-5654

Rahmat, Abdul Razak and Lim, P. S. and Lee, Tin Sin and Soo, Tueen Bee and Tiam, Ting Tee (2012) The effect of chain extender on viscosity and mechanical properties of poly (buthylene terepthalate) blending with recycled poly(ethylene terephthalate)-glass fiber composite. Journal of Applied Science, 12 (3). pp. 296-300. ISSN 1812-5654

Ramli, Aizi Nor Mazila and Mahadi, N. M. and Shamsir, M. S. and Rabu, A. and Tan, K. H. Joyce and Murad, A. M. and Illias, R. M. (2012) Structural prediction of a novel chitinase from the psychrophilic glaciozyma antarctica PI12 and an analysis of its structural properties and function. Journal of Computer-Aided Molecular Design, 26 . pp. 947-961. ISSN 0920-654X

Ramli, Ros Azlinawati (2012) Synthesis and characterization of poly(acrylamide-co-acrylic acid)grafted poly(styrene-co-methyl methacrylate)microgels via semi batch emulsion polymerization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rasep, Zuraidah (2012) Removal of cadmium from waste water industry by using ferromagnetic photocatalyst gel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rashid, Muhammad Usman (2012) The adsorption characteristics of gold onto 3 aminopropyltriethoxysilane grafted coconut pith. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering dan Kejuruteraan Sumber Asli.

Rashidi, Saba (2012) The effects of carbon black in epoxy coating filled polyaniline/nano-zinc/carbon black on corrosion resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Razis Saidin, Mohammd Abdul and Ismail, Ahmad Fauzi and Mohd. Sanip, Suhaila and Goh, Pei Sean and Aziz, Madzlan and Tanemura, M. (2012) Controlled growth of carbon nanofibers using plasma enhanced chemical vapor deposition : effect of catalyst thickness and gas ratio. Thin Solids Films, 52 . pp. 2575-2581. ISSN 0040-6090

Riaz, Amjad (2012) Dynamic model of an energy efficient integrated steam reformer and methanol reactor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Riaz, Amjad and Zahedi, Gholamreza (2012) Embedding methane steam reformer and methanol reactor into a single reactor. Computer Aided Chemical Engineering, 31 . pp. 1170-1174. ISSN 1570-7946

Rohani, Behzad and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and Saqr, Khalid M. (2012) Comparison of eddy dissipation model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. In: 4th International Meeting of Advances in Thermofluids, IMAT 2011. American Institute of Physics, Maryland, New York, pp. 384-391. ISBN 978-073541032-9

Mohammad Rozali, Nor Erniza and Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin (2012) Design of hybrid power systems with energy losses. Chemical Engineering Transactions, 29 . pp. 121-126. ISSN 1974-9791

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara T. (2012) Electron beam irradiation of low density polyethylene/ethylene vinyl acetate filled with metal hydroxides for wire and cable applications. Polymer Degradation and Stability, 97 (8). pp. 1432-1437. ISSN 0141-3910

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2012) Electron beam irradiation of low-density polyethylene filled with metal hydroxides for wire and cable applications. Polymer Bulletin, 69 (9). pp. 1103-1114. ISSN 0170-0839

Sabet, Maziyar and Hassan, Azman and Ratnam, Chantara Thevy (2012) Mechanical, electrical, and thermal properties of irradiated low-density polyethylene by electron beam. Polymer Bulletin, 68 (9). pp. 2323-2339. ISSN 0170-0839

Sadighi, Sepehr (2012) Modeling of vacuum gas oil hydrocracking process using lumping approach. PhD thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sadighi, Sepehr and Ahmad, Arshad and Masoudian, Seyed Kamal (2012) Effect of lump partitioning on the accuracy of a commercial vacuum gas oil hydrocracking model. International Journal of Chemical Reactor Engineering, 10 . pp. 1-23. ISSN 1542-6580

Sadighi, Sepehr and Ahmad, Arshad and Shirvani, Mansoor (2012) Dynamic simulation of a pilot scale vacuum gas oil hydrocracking unit by the space-time CE/SE method. Chemical Engineering & Technology, 35 (5). pp. 919-928. ISSN 0930-7516

Saidina Amin, Nor Aishah and Misson, Mailin and Haron, Roslindawati and Ahmad Kamaroddin, Mohd. Fadhzir and Wan Omar, Wan Nor Nadyaini and Kok, Giap Haw (2012) Bio-oils and diesel like fuel derived from alkaline treated empty fruit bunch (EFB). International Journal of Biomass and Renewables, 1 (1). pp. 6-14. ISSN 2289-1692

Salleh, Intan Suhairi and Mohd. Yusof, Khairiyah and Zahedi, Gholamreza (2012) Fuzzy logic model for deodorizer troubleshooting in palm oil refining. International Conference on Control, Automation and Systems . pp. 374-378. ISSN 1598-7833

Saman, N. and Johari, K. and Mat, H. (2012) Effects of synthesis parameters towards morphological properties of silica Xerogels. Asian Journal Of Applied Sciences, 5 (4). pp. 247-251. ISSN 1996-3343

Samsudin, Sani Amril and Kukureka, Stephen N. and Jenkins, Mike J. (2012) Miscibility in cyclic poly(butylene terephthalate) and styrene maleimide blends prepared by solid-dispersion and in situ polymerization of cyclic butylene terephthalate oligomers within styrene maleimide. Journal Of Applied Polymer Science, 126 . E290-E297. ISSN 0021-8995

Sapawe, Norzahir and Abdul Jalil, Aishah and Triwahyono, Sugeng and Adam, Siti Hazirah and Jaafar, N. F. and Satar, Mohammad Azrul Hisham (2012) Isomorphous substitution of ZR in the framework of aluminosilicate hy by an electrochemical method: evaluation by methylene blue decolorization. Applied Catalysis B: Environmental, 125 . pp. 311-323. ISSN 0626-3373

Sarmidi, Mohamad Roji and Ali El-Enshasy, Hesham Ali Metwally (2012) Biotechnology for wellness industry: concepts and biofactories. International Journal of Biotechnology for Wellness Industries (IJBWI), 1 (1). pp. 3-28. ISSN 1927-3037

Sattar, A. and Rashid, M. and Mat, R. and Puji, L. (2012) A preliminary survey of air quality in Makassar City South Sulawesi Indonesia. Jurnal Teknologi (Sciences and Engineering), 57 (SUP. 1). pp. 123-136. ISSN 0127-9696

Sayid Abdullah, Sharifah Hanis Yasmin (2012) Treatment of simulated refinery based sulfidic spent caustic using photo-fenton oxidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Setiabudi, H. D. and Abdul Jalil, Aishah and Triwahyono, Sugeng (2012) Ir/Pt-HZSM5 for n-pentane isomerization: effect of iridium loading on the properties and catalytic activity. Journal of Catalysis, 294 . pp. 128-135. ISSN 0021-9517

Shakaib, M. and Ahmed, I. and Rosli, M. Yunus and Idris, Ani and Hussain, A. (2012) Influence of monosodium glutamate additive on the morphology and permeability characteristics of polyamide dialysis membranes. Journal of Applied Polymer Science, 128 (5). pp. 3346-3355. ISSN 0021-8995

Shakaib, Muhammad and Ahmed, Iqbal and M. Yunus, Rosli and Idris, Ani (2012) Effect of added monosodium glutamate on characteristics of polyamide dope solutions. Journal of Macromolecular Science Part B-Physics, 51 (10). pp. 2049-2063. ISSN 0022-2348 (Print); 1525-609X (Electronics)

Shams, Gholamhossein (2012) Fingerprinting of effective phytochemicals from traditional diabetes herbal medication. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shamsul Annuar, Nur Arbainah (2012) Lipid and phytochemicals profiles of non heat treated virgin coconut oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Shamsuri, Nur Afiqah Ahmad and Mohidem, Nur Atikah and Mansor, Azmi Fadziyana and Mat, Hanapi (2012) Biodegradation of dye using free laccase and sol-gel laccase. Jurnal Teknologi (Sciences and Engineering), 59 . pp. 39-42. ISSN 0127-9696

Shehu, Muhammad Sani and Abdul Manan, Zainuddin and Wan Alwi, Sharifah Rafidah (2012) Optimization of thermo-alkaline disintegration of sewage sludge for enhanced biogas yield. Bioresource Technology, 114 . pp. 69-74. ISSN 0960-8524

Sidik, Hayatu Umar (2012) Anaerobic co-digestion of palm oil mill effluent with cow manure for biogas production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sidik, Siti Munirah and Jalil, A. A. and Triwahyono, S. and Adam, S. H. and Satar, M. A. H. and Hameed, B. H. (2012) Modified oil palm leaves adsorbent with enhanced hydrophobicity for crude oil removal. Chemical Engineering Journal, 203 . pp. 1-18. ISSN 1385-8947

Sin, Lee Tin and Wan Abdul Rahman, Wan Aizan and Rahmat, Abdul Razak and Bee, Soo Tueen and Tee, Tiam Ting and Low, Chong Yu (2012) Measurement and simple equation models of the specific heats of neat and glycerol-plasticized poly(vinyl alcohol). Journal of Vinyl and Additive Technology, 18 (3). pp. 198-203. ISSN 1083-5601

Sin, Lee Tin and Wan Abdul Rahman, Wan Aizan and Rahmat, Abdul Razak and Tee, Tiam Ting and Bee, Soo Tueen and Chong-Yu, Low (2012) Computer aided injection moulding process analysis of polyvinyl alcohol-starch green biodegradable polymer compound. Journal of Manufacturing Processes, 14 (1). pp. 8-19. ISSN 1526-6125

Sukri, S. M. and Suradi, N. L. and Arsad, A. and Rahmat, A. R. and Hassan, A. (2012) Green composites based on recycled polyamide-6/recycled polypropylene kenaf composites: mechanical, thermal and morphological properties. Journal of Polymer Engineering, 32 (4-5). pp. 291-299. ISSN 0334-6447

Suleiman, Mohd. Salleh (2012) Determination of optimum sodium bicarbonate injection rates for acid hydrochloric scrubbing in a clinical waste incineration plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sy. Mohamad, Sharifah Fathiyah (2012) The susceptibility of APHIDS, Aphis gossypii Glover to lauric acid based natural pesticide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Syed Muhammad, Syed Anuar Faua'ad and Tang, Patricia and Chan, Hak Kim and Dehghania, Fariba (2012) The effect of lactose micro-spherical crystals prepared by conditioning with supercritical fluid on salbutamol sulphate inhalation performance. The Journal of Supercritical Fluids, 71 . pp. 92-101. ISSN 0896-8446

Tajuddin, Rohana (2012) Effect of rice straw as sensitizer in the microwave-induced pyrolysis of plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tan, Raymond and Lam, Han Loong and Kasivisvanathan, Harresh and Ng, Denny K. S. and Foo, Dominic Chwan Yee and Abdul Aziz, Mustafa Kamal and Hallaler, N. and Klemes, Jiri (2012) An algebraic approach to identifying bottlenecks in linear process models of multifunctional energy systems. Theoretical Foundations of Chemical Engineering, 46 (6). pp. 642-650. ISSN 0040-5795

Tiew, B. J. and Shuhaimi, Mahadzir and Hashim, Haslenda (2012) Carbon emission reduction targeting through process integration and fuel switching with mathematical modeling. Applied Energy, 92 . pp. 686-693. ISSN 0306-2619

Wahit, Mat Uzir and Akos, Noel Ibrahim and Laftah, Waham Ashaier (2012) Influence of natural fibers on the mechanical properties and biodegradation of poly(lactic acid) and poly(e-caprolactone) composites: a review. Polymer Composites, 33 (7). pp. 1045-1053. ISSN 0272-8397

Wahit, Mat Uzir and Akos, Noel Ibrahim and Laftah, Waham Ashaier (2012) Influence of natural fibers on the mechanical properties and biodegradation of poly(lactic acid) and poly(ε‐caprolactone) composites: a review. Polymer Composites, 33 (7). pp. 1045-1053. ISSN 0272-8397

Wai, Shin Ho and Hashim, Haslenda and Ab. Muis, Zarina (2012) Integrated biomass power plant and storage for peak load management. Computer Aided Chemical Engineering, 31 . pp. 1000-1004. ISSN 1570-7946

Wai, Shin Ho and Hashim, Haslenda and Hassim, Mimi H. and Shamsuddin, Liyana (2012) Design Of biomass based distributed energy generation system through Electric System Cascade Analysis (ESCA). In: 2nd Malaysian International Conference on Trends In Bioprocess Engineering (MICOTriBE 2012), 3-5 July 2012, Langkawi, Kedah.

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Misman, M. (2012) A new tool for simultaneous targeting and design of heat exchanger networks. Computer Aided Chemical Engineering, 31 . pp. 1547-1551. ISSN 1570-7946

Wan Alwi, Sharifah Rafidah and Abdul Manan, Zainuddin and Sun, Kheen Nama (2012) A new method to determine the optimum heat exchanger network approach temperature. Computer Aided Chemical Engineering, 31 . pp. 190-194. ISSN 1570-7946

Wan Alwi, Sharifah Rafidah and Mohammad Rozali, Nor Erniza and Abdul Manan, Zainuddin and Klemeš, Jiri Jaromír (2012) A process integration targeting method for hybrid power systems. Energy, 44 (1). pp. 6-10. ISSN 0360-5442

Wan Alwi, Sharifah Rafidah and Peng, Yen Liew and Varbanov, Petar Sabev and Abdul Manan, Zainuddin and Klemes, Jiri Jaromir (2012) A numerical tool for integrating renewable energy into total sites with variable supply and demand. Computer Aided Chemical Engineering, 30 . pp. 1348-1351. ISSN 1570-7946

Wang, Jun Jie (2012) Optimization study on recovery hydrocarbons from pyrolysis oil using ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ya'aini, Nazlina (2012) Levulinic acid production from lignocellulosic biomass using hy zeolite supported chromium catalyst in ionic liquid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ya'aini, Nazlina and Amin, Nor Aishah Saidina (2012) Catalytic performance of hybrid nanocatalyst for levulinic acid production from glucose. AIP Conference Proceedings, 1502 (1). pp. 442-453. ISSN 0094-243X

Ya’aini, Nazlina and Saidina Amin, Nor Aishah and Mohammed Yussuf, Mohd. Asmadi (2012) Optimization of levulinic acid from lignocellulosic biomass using a new hybrid catalyst. Bioresource Technology, 116 . pp. 58-65. ISSN 0960-8524

Yaakob, Harisun and Ahmed, Nor Rashidah and Daud, Siti Khairunnisa and Abdul Malek, Roslinda and Abdul Rahman, Roshanida (2012) Optimization of ingredient and processing levels for the production of coconut yogurt using response surface methodology. Food Science and Biotechnology, 21 (4). pp. 933-940. ISSN 1226-7708(Print); 2092-6456(Electronic)

Yanwarizal, Yanwarizal (2012) Continuous individual plot curves technique for simultaneous targeting and design of a mass exchange network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yusof, Norhaniza and Ismail, Ahmad Fauzi and Rana, Dipak and Matsuura, Takeshi (2012) Effects of the activation temperature on the polyacrylonitrile / acrylamide-based activated carbon fibers. Materials Letters, 82 . pp. 16-18. ISSN 0167-577X

Yusof, Rafiu O. and Noor, Zainura Z. and Abba, Ahmad H. and Abu Hassan, Mohd. Ariffin and Mohd. Din, Mohd. Fadhil (2012) Methane emission by sectors: a comprehensive review of emission sources and mitigation methods. Revewable and Sustainable Energy Reviews, 16 . pp. 5059-5070. ISSN 1364-0321

Yusuf, Rafiu O. and Noor, Zainura Zainon and Mohd. Din, Mohd. Fadhil and Abba, Ahmad H. (2012) Use of sewage sludge ash (SSA) in the production of cement and concrete - a review. International Journal Of Global Environmental Issues, 12 (2-4). pp. 214-228. ISSN 1466-6650

Zahed, Gholamreza (2012) Design of biomass processing network for electricity generation using MINLP model : a case study on Iskandar Malaysia. In: The International Conference on Sustainable Development 2012 (ICSD 2012).

Zailani, Siti Nazrah (2012) Removal and recovery of reactive dye from aqueous solution using emulsion liquid membrane process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zainal Alam, Muhd. Nazrul Hisham (2012) Development of microbioreactor prototype for fermentation processes : challenges and limitations. In: Conference.

Zakaria, Zainoha and Linnekoski, J. and Saidina Amin, Nor Aishah (2012) Catalyst screening for conversion of glycerol to light olefins. Chemical Engineering Journal, 207-08 . pp. 803-813. ISSN 1385-8947

Zakaria, Zainul Akmar and Ahmad, Wan Azlina and Zakaria, Zainoha and Razali, Firdausi and Abdul Karim, Norsuhada and Md. Sum, Mohamad and Mohd. Sidek, Mohd. Saufi (2012) Bacterial reduction of CR(vi) at technical scale-the Malaysian experience. Applied Biochemistry And Biotechnology, 167 (6). pp. 1641-1652. ISSN 0273-2289

Zoveidavianpoor, Mansoor and Samsuri, Ariffin and Shadizadeh, Seyed Reza (2012) Development of a fuzzy system model for candidate-well selection for hydraulic fracturing in a carbonate reservoir. In: Society of Petroleum Engineers - Spe Oil and Gas India Conference and Exhibition 2012, Ogic - Further, Deeper, Tougher: The Quest Continues... Society of Petroleum Engineers, Richardson, Texas, pp. 148-172. ISBN 978-1-61399-192-3