Items where Year is 2020

A

Abd. Majid, Nurulhasnan and Che Idris, Azam and Mohd. Faizal, Hasan and Abdul Rahman, Mohd. Rosdzimin and Hosseini, Seyed Ehsan (2020) Characteristics of liquid fuel combustion in a novel miniature vortex combustor. Journal of Thermal Analysis and Calorimetry, 140 (3). pp. 1569-1578. ISSN 1388-6150

Ayatollahi, Majid R. and Nabavi-Kivi, A. and Bahrami, Bahador and Yahya, M. Yazid and Khosravani, Mohammad Reza (2020) The influence of in-plane raster angle on tensile and fracture strengths of 3D-printed PLA specimens. Engineering Fracture Mechanics, 237 . p. 107225. ISSN 0013-7944

Abd. Rahman, Hamimah and Agun, Linda and Ng, Kei Hoa and Ahmad, Sufizar and Nordin, Nur Azmah (2020) Effects of binary (Lithium/Natrium)2 carbonates on the phase and microstructural stability of Lscf-Sdc for low temperature solid oxide fuel cells. Sains Malaysiana, 49 (12). pp. 3155-3167. ISSN 0126-6039

A., Nurulhuda and Sudin, I. and Ngadiman, Nor Hasrul Akhmal (2020) Fabrication a novel 3D tissue engineering scaffold of Poly (ethylene glycol) diacrylate filled with Aramid Nanofibers via Digital Light Processing (DLP) technique. Journal of Mechanical Engineering, 9 (1). pp. 1-12. ISSN 1823-5514

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Samin, Pakharuddin and Mohd. Yatim, Hanim and Ardani, Mohd. Ibthisham and Shaharuddin, Nik Mohd. Ridzuan and Hadi, Muhamad Sukri (2020) Vibration control of semi-active suspension system using PID controller with advanced firefly algorithm and particle swarm optimization. Journal of Ambient Intelligence and Humanized Computing, 12 (1). pp. 1119-1137. ISSN 1868-5137

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Yatim, Hanim and Shaharuddin, Nik Mohd. Ridzuan and Hadi, Muhamad Sukri and Jamali, Annisa (2020) Intelligent optimization of force tracking parameters for MR damper modelling using firefly algorithm. In: 2nd International Conference on Applied Engineering, ICAE 2019, 2 - 3 October 2019, Batam, Indonesia.

Ab. Wahid, Mastura and Asmi, A. N. and Othman, N. and Ardani, M. I. and Md. Zain, M. Z. and Mansor, S. (2020) The effect of different motor constants to an commercial propeller. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, Putrajaya, Malaysia.

Abd., H. S. and Abdulmunem, A. R. and Jabal, M. H. and Samin, P. M. and Rahman, H. A. (2020) Working features evaluation of the diesel engine lubricated with blends of renewable corn oil and carbon nanotubes. Journal of Mechanical Engineering Research and Developments, 43 (2). pp. 384-395. ISSN 1024-1752

Abd. Halim, M. A. and Nik Mohd., N. A. R. and Mohd Nasir, M. N. and Dahalan, M. N. (2020) Experimental and numerical analysis of a motorcycle air intake system aerodynamics and performance. International Journal of Automotive and Mechanical Engineering, 17 (1). ISSN 2229-8649

Abd. Rahim, Irfan (2020) Simulation and experimental design of thermoacoustic heat engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Abd. Rahman, Nur Ain and Abd. Malik, Adi Maimun and Nakisa, Mehdi and Abd. Rahman, Norhanifah and Manap, Norhashidah (2020) Numerical prediction on resistance reduction of multi-purpose amphibious vehicle (MAV) due to air-cushion effect in a regular wave. In: First International Conference on Emerging Electrical Energy, Electronics and Computing Technologies 2019, 30–31 October 2019, Melaka, Malaysia.

Abdelmaksoud, S. I. and Mailah, M. and Abdallah, A. M. (2020) Robust intelligent self-tuning active force control of a quadrotor with improved body jerk performance. IEEE Access, 8 . 150037 -150050. ISSN 2169-3536

Abdelmaksoud, Sherif I. and Mailah, Musa and Abdallah, Ayman M. (2020) Control strategies and novel techniques for autonomous rotorcraft unmanned aerial vehicles: a review. IEEE Access, 8 . pp. 195142-195169. ISSN 2169-3536

Abdul Halim, A. A. A. and Sudin, I. and Wan Ali, W. F. F. and Yasak, R. and Md. Sirat, R. and Othman, M. A. and Abdullah, N. S. and Ahmad, Z. A. (2020) Formation of yttria aluminium garnet by microwave sintering. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23-24 July 2019, Kangar, Perlis.

Abdul Halim, Zulhelmi Alif (2020) Rice husk derived silica aerogel in unsaturated polyester composites. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Abdul Halim, Zulhelmi Alif and Mat Yajid, Muhamad Azizi and Nurhadi, Fajar Anugrah and Ahmad, Norhayati and Hamdan, Halimaton (2020) Effect of silica aerogel aluminum trihydroxide hybrid filler on the physio mechanical and thermal decomposition behavior of unsaturated polyester composite. Polymer Degradation and Stability, 182 . ISSN 0141-3910

Abdul Haq, R. H. and Abdol Rahman, M. N. and Tajul Arifin, A. M. and Hassan, M. F. and Taib, I. and Wahit, M. U. (2020) Thermal properties of polycaprolactone (PCL) reinforced montmorillonite (MMT) and hydroxyapatite (HA) as an alternate of FDM composite filament. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 112-121. ISSN 2289-7879

Abdul Kadir, Aini Zuhra and Yusof, Yusri and Wahab, Md. Saidin (2020) Additive manufacturing cost estimation models—a classification review. International Journal of Advanced Manufacturing Technology, 107 (9-10). pp. 4033-4053. ISSN 0268-3768

Abdullah, Hayati and Ibrahim, Oleolo and Mohd. Jaafar, Mohammad Nazri and Mohamad, Maziah and Baharain, Akmal and Sulaiman, Sapiah (2020) Energy savings in a multi-circuit water-cooled packaged unit air-conditioning system. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 76 (1). pp. 39-53. ISSN 2289-7879

Abdullah, N. A. Z. and Sani, M. S. M. and Salwani, M. S. and Husain, N. A. (2020) A review on crashworthiness studies of crash box structure. Thin-Walled Structures, 153 . ISSN 0263-8231

Abdulmunem, A. R. and Samin, P. M. and Rahman, H. A. and Hussien, H. A. and Mazali, I. I. and Ghazali, H. (2020) Experimental and numerical investigations on the effects of different tilt angles on the phase change material melting process in a rectangular container. Journal of Energy Storage, 32 . ISSN 2352-152X

Abdulmunem, Abdulmunem R. and Mohd. Samin, Pakharuddin and Abdul Rahman, Hasimah and Hussien, Hashim A. (2020) Effects of different tilt angles on the thermo-electrical performance of a PV/PCM system. Journal of Engineering Science and Technology, 15 (3). pp. 1731-1746. ISSN 1823-4690

Abdulmunem, Abdulmunem R. and Mohd. Samin, Pakharuddin and Abdul Rahman, Hasimah and Hussien, Hashim A. and Mazali, Izhari Izmi (2020) Enhancing PV Cell's electrical efficiency using phase change material with copper foam matrix and multi-walled carbon nanotubes as passive cooling method. Renewable Energy, 160 . pp. 663-675. ISSN 0960-1481

Abedlhafd Alhwani, Mohammed Mustafa (2020) Echanced thermoeletric properties of P-Type calcium cobalt oxide via aluminum, al-ni and porous al-ni co-dopings. PhD thesis, Universiti Teknologi Malaysia.

Abu, F. and Gholami, H. and Zakuan, N. and Saman, M. Z. M. and Streimikiene, D. and Streimikis, J. (2020) The influence of contextual factors on the implementation of lean practices: an analysis of furniture industries. Amfiteatru Economic, 22 (55). ISSN 1582-9146

Abu, Falah (2020) Framework of lean manufacturing implementation for wood and furniture industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia.

Abu Hasan, Muhammad Danial and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee (2020) Automated harmonic signal removal technique using stochastic subspace-based image feature extraction. Journal of Imaging, 6 (3). 0010-0010. ISSN 2313-433X

Abu Hasan, Muhammad Danial and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee (2020) A novel approach for automated operational modal analysis using image clustering. Pertanika Journal of Science and Technology, 28 (1). pp. 49-67. ISSN 0128-7680

Abu Husain, N. and Ismail, N. H. F. and Baharuddin, M. M. and Mansor, M. S. F. and Mohd. Zaki, N. I. and Abu Husain, M. K. and Ma'aram, A. and Wiyono, A. S. and Chaiyakul, T. and Ahmad, Y. and Abu Kassim, K. A. (2020) Child presence detection: assessment methodology for ASEAN NCAP. Journal of the Society of Automotive Engineers Malaysia, 4 (2). pp. 145-158. ISSN 2600-8092

Abu Husain, N. and Mohd. Zaki, N. I. and Che Husin, S. M. and Ahmad, Y. and Abu Kassim, K. A. (2020) Establishment procedure of child restraint systems reference list for ASEAN NCAP. Journal of the Society of Automotive Engineers Malaysia, 4 (1). pp. 50-60. ISSN 2600-8092

Adrees Majeed, Faraj Saeid and Mohd. Yusof, Nordin and Suhaimi, Mohd. Azlan (2020) Finish hard turning: A review of minimum quantity lubrication using paraffin-based nanofluids. In: International Conference on Advanced Lightweight Materials and Structures (ICALMS) 2020, 6 - 7 March 2020, Hyderabad, India.

Afripin, Mohammad Amirul Affiz (2020) Damage mechanics-based model for reliability assessment of through-silicon via interconnects. PhD thesis, Universiti Teknologi Malaysia.

Agun, Linda and Ahmad, Norhayati and Redzuan, Norizah and Mohd. Ali, Muhammad Farid Aidil and Zainal, Muhamad Nor Firdaus and Misnal, Mohd. Fadthul Ikmal and Raja Ibrahim, Raja Kamarulzaman (2020) Spawn treatment by cold plasma for increase mushroom germination and production. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Ahmad, Amirul A. and M. Jaafar, Mohammad N. and Othman, Norazila and M. Azli, Anis A. and Said, Mazlan and Rahim, Muhammad R. and A. Malik, Muhammad S. and W. Omar, Wan Z. (2020) Combustion and emission characteristics of palm-oil-based biodiesel in a liquid fuel burner. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, Putrajaya, Malaysia.

Ahmad, Maznah Iliyas and Yusof, Yusri and Daud, Md. Elias and Latiff, Kamran and Abdul Kadir, Aini Zuhra and Saif, Yazid (2020) Machine monitoring system: a decade in review. International Journal of Advanced Manufacturing Technology, 108 (11-12). pp. 3645-3659. ISSN 0268-3768

Ahmad, Noor Afifah and Samion, Syahrullail and Abd. Rahim, Erween and Mohd. Jamir, Mohd. Ridzuan (2020) Environmentally approach for enhancing tribological characteristics in metal forming: A review. Jurnal Tribologi, 26 . pp. 37-59. ISSN 2289-7232

Ahmad Bakir, Azman and Hassan, Adnan and Abdul Hamid, Mohd. Foad (2020) Feature extraction methods for prognosis maintenance model. In: Sustainable and Integrated Engineering International Conference 2019 (SIE 2019), 8 - 9 December 2019, Putrajaya, Malaysia.

Ahmad Fitriadhy, Ahmad Fitriadhy and Lim, Sun Yin and Abdul Malik, Adi Maimun (2020) Prediction of an optimum total resistance coefficient on catamaran using Design of Experiment (DOE) incorporated with CFD approach. EPI International Journal of Engineering, 3 (1). pp. 74-83. ISSN 2621-0541

Ahmad Tajuddin, Ahmad Sulaiman and Abu Bakar, Abd. Rahim (2020) Reduction of disc brake squeal noise through brake pad modification. Journal of Transport System Engineering, 7 (1). pp. 1-5. ISSN 2289-9790

Ahmed, Yaseen Adnan and Hannan, Mohammed Abdul and Kang, Hooi Siang (2020) Artificial neural network controller for automatic ship berthing: challenges and opportunities. Marine Systems and Ocean Technology, 15 (4). pp. 217-242. ISSN 1679-396X

Ahmed Shakil, Usaid and Abu Hassan, Shukur and Yahya, Mohd. Yazid and Mujiyono, Mujiyono and Nurhadiyanto, Didik (2020) A review of properties and fabrication techniques of fiber reinforced polymer nanocomposites subjected to simulated accidental ballistic impact. Thin-Walled Structures, 158 . p. 107150. ISSN 0263-8231

Ahmed Suliman, Ali H. and Katimon, Ayob and Mat Darus, Intan Zaurah (2020) Daily discharge simulation: combining semi-distributed GIS-based and artificial intelligence models. International Journal of Hydrology Science and Technology, 10 (5). pp. 471-486. ISSN 2042-7808

Aiman, Y. and Mariam, S. and Musa, M. N. and Syahrullail, S. (2020) Air flow analysis and effect of angle on rotation vane blade trough 90° pipe bend. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Al Muallim, Basel and Wahid, M. A. and Mohammed, H. and Kamil, M. and Habibi, D. (2020) Thermal-Hydraulic performance in a microchannel heat sink equipped with longitudinal vortex generators (LVGs) and nanofluid. Processes, 8 (2). p. 231. ISSN 2227-9717

Al-Bakoosh, AbdelaiSalam Ali (2020) Microstructure, mechanical properties and corrosion behavior of AA5083 aluminum alloy modified with rare earth elements. PhD thesis, Universiti Teknologi Malaysia.

Alawi, Omer A. and Mohamed Kamar, Haslinda and Mohammed, Hussein A. and Mallah, A. R. and Hussein, Omar A. (2020) Energy efficiency of a flat-plate solar collector using thermally treated graphene-based nanofluids: Experimental study. Nanomaterials and Nanotechnology, 10 . p. 13. ISSN 1847-9804

Alawi, Omer A. and Mohamed Kamar, Haslinda (2020) Performance of solar thermal collector using multi-walled carbon nanotubes: simulation study. Journal of Advanced Research in Micro and Nano Engineering, 2 (1). pp. 12-21. ISSN 2756-8210

Alduqri, Y. A. and Kamar, H. M. and Musa, M. N. and Kamsah, N. B. and Idris, N. R. N. and Alqaifi, Gamal (2020) A novel double chamber rotary sleeve air compressor -part II: friction losses model. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Ali, Mohammed A. H. and Mailah, Musa and Jabbar, Waheb A. and Moiduddin, Khaja and Ameen, Wadea and Alkhalefah, Hisham (2020) Autonomous road roundabout detection and navigation system for smart vehicles and cities using laser simulator fuzzy logic algorithms and sensor fusion. Sensors (Switzerland), 20 (13). pp. 1-28. ISSN 1424-8220

Ali, Norazhar and Osman, Kahar and Mohd. Zawawi, Fazila and Muhammad Yazid, Muhammad Noor Afiq Witri (2020) The effect of flow variations to vibration tendency in a hydraulic manifold. In: Sustainable and Integrated Engineering International Conference 2019, 8-9 December 2019, Putrajaya, Malaysia.

Ali, Z. M. and Kuntjoro, W. and Wisnoe, W. and Ishak, Iskandar Shah and Katon, M. Z. and Ahmad, N. (2020) Aerodynamics analysis on the effect of canard aspect ratio on blended wing body aircraft using CFD simulation. In: 6th International Conference on Advances in Mechanical Engineering 2019, ICAME 2019, 14 August 2019 - 16 August 2019, The Pacific Sutera Hotel, Kota Kinabalu, Sabah, Malaysia.

Anis, S. F. and Koyama, M. and Hamada, S. and Noguchi, H. (2020) Influence of dynamic-strain aging due to excess mg on fatigue crack growth rate scatter in Al6061-T6 alloy. Theoretical and Applied Fracture Mechanics, 108 . ISSN 0167-8442

Anis, S. F. and Koyama, M. and Hamada, S. and Noguchi, H. (2020) Simplified stress field determination for an inclined crack and interaction between two cracks under tension. Theoretical and Applied Fracture Mechanics, 107 . ISSN 0167-8442

Ardani, M. I. and Ab. Wahid, M. and Ab. Talib, M. H. and Che Daud, Z. H. and Asus, Z. and M. Ariff, M. A. (2020) Thermal component for an electrochemical lithium-ion battery model: impact and variation on the battery performance. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 December 2019 - 10 December 2019, Putrajaya, Malaysia.

Asmi, A. N. and Othman, N. and Md. Zain, M. Z. and Ab. Wahid, M. (2020) A study on human foot pressure behaviour and balancing characteristics. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Putrajaya, Putrajaya, Malaysia.

Asus, Z. and Madon, M. I. S. and Che Daud, Z. H. and Muhamad Said, M. F. and Aglzim, E. H. and Ab. Talib, M. H. and Ahmad, Z. A. (2020) Simulation analysis of fuel cell integration in a hybrid car. In: Energy Security and Chemical Engineering Congress 2019, ESChE 2019, 17 - 19 July 2019, Kuala Lumpur, Malaysia.

Asus, Z. and Mat Razi, M. F. I. and Mahmudin, M. F. and Che Daud, Z. H. and Mazali, I. I. and Ardani, M. I. (2020) Design and control of a motor wheel system controlled by smartphone. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Azizan, Azisyahirah (2020) Mesoscale lamina fatigue damage model for fiber-reinforced polymer composite laminates. PhD thesis, Universiti Teknologi Malaysia.

B

Bahador, Abdollah and Junko, Umeda and Yamanoglu, Ridvan and Ghandvar, Hamidreza and Issariyapat, Ammarueda and Abu Bakar, Tuty Asma and Katsuyoshi, Kondoh (2020) Deformation mechanism and enhanced properties of Cu–TiB2 composites evaluated by the in-situ tensile test and microstructure characterization. Journal of Alloys and Compounds, 847 . p. 156555. ISSN 0925-8388

Bahrami, B. and Ayatollahi, M. R. and Mirzaei, A. M. and Yahya, M. Y. (2020) Support type influence on rock fracture toughness measurement using semi-circular bending specimen. Rock Mechanics and Rock Engineering, 53 (5). ISSN 0723-2632

Balasubramaniam, Thamilarasan (2020) Embedment of empathic approach using touch point tool in concept generation phase of design process. Masters thesis, Universiti Teknologi Malaysia.

Barrie, Alusine and Mohd. Rohani, Jafri and Redzuan, Norizah (2020) Risk estimation of construction activities of buildings. In: 5th International Conference on Industrial, Mechanical Electrical, and Chemical Engineering 2019, ICIMECE 2019, 17 September 2019 - 18 September 2019, Surakarta, Indonesia.

Barzegaravval, Hasan and Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan and Saat, Aminuddin (2020) Dimensionless exergo-economic and emission parameters for biogas fueled gas turbine optimization. Journal of Cleaner Production, 262 . p. 121153. ISSN 0959-6526

Basri, Hasan and Prakoso, Akbar Teguh and Sulong, Mohd. Ayub and Md. Saad, Amir Putra and Ramlee, Muhammad Hanif and Wahjuningrum, Dian Agustin and Sipaun, Susan and Ochsner, Andreas and Syahrom, Ardiyansyah (2020) Mechanical degradation model of porous magnesium scaffolds under dynamic immersion. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234 (1). pp. 175-185. ISSN 1464-4207

Binoj, J. S. and Raj, R. Edwin and Abu Hassan, Shukur and M. Mariatti, M. Mariatti and Siengchin, Suchart and Sanjay, M. R. (2020) Characterization of discarded fruit waste as substitute for harmful synthetic fiber-reinforced polymer composites. Journal of Materials Science, 55 (20). pp. 8513-8525. ISSN 0022-2461

Burhani, Burhani M. and M. Jaafar, Mohammad N. and Othman, Norazila and M. Azli, Anis A. and Said, Mazlan and Rahim, Muhammad R. and A. Malik, Muhammad S. and W. Omar, Wan Z. (2020) Performance and emission characteristics of rice bran oil in an oil burner. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Hotel, Putrajaya, Malaysia.

Burhanuddin, N. M. and Redzuan, N. and Ahmad, N. and Sudin, I. and Zaharuddin, M. F. A. (2020) Brief review on dissimilar welding using cold metal transfer. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Putrajaya, Putrajaya, Malaysia.

C

Che Daud, Zul Hilmi and Asus, Zainab and Abu Bakar, Saiful Anuar and Abu Husain, Nurulakmar and Mazali, Izhari Izmi and Chrenko, Daniela (2020) Thermal characteristics of a lithium‐ion battery used in a hybrid electric vehicle under various driving cycles. IET Electrical Systems in Transportation, 10 (3). pp. 243-248. ISSN 2042-9738

Chiong, M. C. and Medina, A. V. and Chong, W. W. F. and Chong, C. T. and Mong, G. R. and Mohd. Jaafar, M. N. (2020) Effects of swirler vane angle on palm biodiesel/natural gas combustion in swirl-stabilised gas turbine combustora. Fuel, 277 .

Chiong, Meng Soon and Rajoo, Srithar and Padzillah, Muhamad H. and Mamat, Aman and Liu, Zheng and Romagnoli, Alessandro and Kraft, Markus and Palenschat, Torsten (2020) Performance improvement of an asymmetric twin scroll turbocharger turbine through secondary flow injection. In: SAE 2020 World Congress Experience, WCX 2020, 21 - 23 April 2020, Detroit, United States of America.

Chiong, Meng Soon and Tan, Feng Xian and Rajoo, Srithar and Martinez Botas, Ricardo F. and Yokoyama, Takao and Fujita, Yutaka and Ebisu, Motoki (2020) On-engine performance evaluation of a new-concept turbocharger compressor housing design. In: SAE 2020 World Congress Experience, WCX 2020, 21 - 23 April 2020, Detroit, United States of America.

Chong, C. T. and Chiong, M. C. and Teyo, Z. Y. and Ng, J. H. and Chong, W. W. F. and Tran, M. V. and Lam, S. S. and Valera-Medina, A. (2020) Pool fire burning characteristics of biodiesel. Fire Technology, 56 (4). ISSN 0015-2684

Chow, Z. P. and Ahmad, Z. and Wong, K. J. (2020) Experimental study of temperature effect on the mechanical properties of GFRP and FML interface. Advanced Structured Materials, 113 . pp. 47-58. ISSN 1869-8433

Cui, Yonggang and Lam, Wei Haur and Ong, Zhi Chao and Ling, Lloyd and Siow, Chee Loon and Robinson, Desmond and Hamill, Gerard (2020) Experimental scours by impinging twin-propeller jets at Quay Wall. Journal of Marine Science and Engineering, 8 (11). pp. 1-22. ISSN 2077-1312

D

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Bakhsheshi-Rad, Hamid Reza and Kumar, Pankaj and Kay, Charles M. and Kalvala, Prasad Rao (2020) Fabrication and corrosion resistance evaluation of novel epoxy/oxide layer (MgO) coating on Mg alloy. Protection of Metals and Physical Chemistry of Surfaces, 56 (5). pp. 1039-1050. ISSN 2070-2051

Dahalan, M. N. and Zahari, H. and Abdul Latif, A. and Mat, S. and Mansor, S. and Othman, N. and Abd. Wahid, M. and Omar, W. Z. W. and Ali, W. K. W. and Lazim, T. M. and Nasir, M. N. (2020) Feasibility study of plasma actuator for flow separation control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (2). ISSN 2289-7879

Dawood, H. I. and Mohammad Musa, Kanaan and Abbas, Rafid K. and Alshemary, Kassim Kadhim Hameed and Uday, M. B. and Jaddan, Riyam I. and Taklef, Leana J. (2020) Effect of friction stir welding on microstructure and mechanical properties of the 6061 aluminium alloy/15vol % SiCp reinforcement. In: 1st International Conference on Engineering and Advanced Technology, ICEAT 2020, 11 - 12 February 2020, Assiut, Egypt.

Delhaise, L. J. and Mazali, Izhari Izmi and Daud, Z. H. C. and Kob, M. S. C. and Asus, Z. (2020) Current usage by a DC motor to vary ratio in an electro-mechanical continuously variable transmission. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Hotel, Putrajaya, Malaysia.

Djamaluddin, Fauzan and Ahmad, Zaini and Mat, Fauziah (2020) Validation of foam filled tube model and optimization result using weibull distribution. Latin American Journal of Solids and Structures, 17 (6). pp. 1-13. ISSN 1679-7817

Doumin, Adam Maxwell and Fahruddin, Akhmal and Che Daud, Zul Hilmi and Asus, Zainab and Mazali, Izhari Izmi and Muhamad Said, Mohd. Farid and Yakub, Fitri (2020) Evaluating thermal performance of pouch type lithium polymer battery cell. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (2). pp. 295-302. ISSN 2289-7879

Dwijotomo, A. and Rahman, M. A. A. and Ariff, M. H. M. and Zamzuri, H. and Azree, W. M. H. W. (2020) Cartographer slam method for optimization with an adaptive multi-distance scan scheduler. Applied Sciences, 10 (1). ISSN 2076-3417

E

Elbatran, Aly Hassan Abdelbaky and Yaakob, Omar B. and Ahmed, Yasser M. (2020) Experimental investigation of a hydraulic turbine for hydrokinetic power generation in irrigation/rainfall channels. Journal of Marine Science and Application . ISSN 1671-9433

Elhawary, Shehab and Saat, Aminuddin and Wahid, Mazlan Abdul and Ghazali, Ahmad Dairobi (2020) Experimental study of using biogas in Pulse Detonation Engine with hydrogen enrichment. International Journal of Hydrogen Energy, 45 (30). pp. 15414-15424. ISSN 0360-3199

Eltayeb, O. A. and Rahman, M. M. and Saat, A. and Faizal, H. M. (2020) Life cycle assessment on a 500 MW oil-fired power plant in Sudan. In: 10th Annual International IEOM Conference, IEOM 2020, 10-12 March 2020, Dubai, United Arab Emirates.

F

Fallahpour, A. and Wong, K. Y. and Rajoo, S. and Mardani, A. (2020) An integrated fuzzy carbon management-based model for suppliers' performance evaluation and selection in green supply chain management. International Journal of Fuzzy Systems, 22 (2). pp. 712-723. ISSN 1562-2479

Fallahpour, Alireza and Wong, Kuan Yew and Rajoo, Srithar and Olugu, Ezutah Udoncy and Nilashi, Mehrbakhsh and Turskis, Zenonas (2020) A fuzzy decision support system for sustainable construction project selection: an integrated FPP-FIS model. Journal of Civil Engineering and Management, 26 (3). pp. 247-258. ISSN 1392-3730

Farahany, S. and Ghandvar, H. and Bozorg, M. and Nordin, A. and Ourdjini, A. and Hamzah, E. (2020) Role of sr on microstructure, mechanical properties, wear and corrosion behaviour of an al-mg2si-cu in-situ composite. Materials Chemistry and Physics, 239 . ISSN 0254-0584

Fareeduddin, Mohammed (2020) Modelling and optimization of closed-loop supply chains with carbon policies under uncertainty. PhD thesis, Universiti Teknologi Malaysia.

Feng, Aichun and Kang, Hooi Siang and Zhao, Binbin and Jiang, Zhiyu (2020) Two-dimensional numerical modelling of a moored floating body under sloping seabed conditions. Journal of Marine Science and Engineering, 8 (6). pp. 1-22. ISSN 2077-1312

Firouzi, Alireza and Mohd. Yusof, Noordin and Lee, Muhammad Hisyam (2020) Multivariate change point estimation in covariance matrix using ANN. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Foo, J. and Aizawa, T. (2020) Wettability control of nano-columnar DLC thin films via Eb-irradiation. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

G

Ghandvar, Hamidreza and Idris, Mohd. Hasbullah and Abu Bakar, Tuty Asma and Nafari, Afshin and Ahmad, Norhayati (2020) Microstructural characterization, solidification characteristics and tensile properties of Al–15%Mg2Si–x(Gd–Sb) in-situ composite. Journal of Materials Research and Technology, 9 (3). pp. 3272-3291. ISSN 22387854

Galankashi, Masoud Rahiminezhad and Madadi, Najmeh and Helmi, Syed Ahmad and Abdul Rahim, Abd. Rahman and Rafiei, Farimah Mokhatab (2020) A multiobjective aggregate production planning model for lean manufacturing: Insights from three case studies. IEEE Transactions on Engineering Management . pp. 1-15. ISSN 0018-9391

Ganjehkaviri, A. and Mohd. Jaafar, M. N. (2020) Multi-objective particle swarm optimization of flat plate solar collector using constructal theory. Energy, 194 . ISSN 0360-5442

Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Idris, Mohd. Hasbullah (2020) Influence of cooling rate on morphology evolution of primary Mg2Si in Al–15Mg2Si-1.0Gd in-situ composite. Malaysian Journal of Microscopy, 16 (2). pp. 11-20. ISSN 1823-7010

Ghandvar, Hamidreza and Faiz, Wan Famin and Abu Bakar, Tuty Asma and Idris, Mohd. Hasbullah (2020) The simultaneous effect of extrusion ratio and solution heat treatment on the microstructure and tensile properties of extruded al-15%mg2si-1.0%gd composite. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 July 2019 - 24 July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

Ghandvar, Hamidreza and Farahany, Saeed and Abu Bakar, Tuty Asma (2020) A novel method to enhance the performance of an ex-situ Al/Si-YSZ metal matrix composite. Journal of Alloys and Compounds, 823 . ISSN 0925-8388

Gholami, H. and Bachok, M. F. and Saman, M. Z. M. and Streimikiene, D. and Sharif, S. and Zakuan, N. (2020) An ism approach for the barrier analysis in implementing green campus operations: towards higher education sustainability. Sustainability, 12 (1).

Gholami, H. and Zakuan, N. and Mat Saman, M. Z. and Sharif, S. and Abdul Kohar, U. H. (2020) Conceptualizing and operationalizing the student relationship management strategy: towards a more sustainable-based platform. Journal of Cleaner Production, 244 . ISSN 0959-6526

Gholami, Hamed and Mat Saman, Muhamad Zameri and Sharif, Safian and Md. Khudzari, Jauharah and Zakuan, Norhayati and Streimikiene, Dalia and Streimikis, Justas (2020) A general framework for sustainability assessment of sheet metalworking processes. Sustainability, 12 (12). p. 4957. ISSN 2071-1050

H

Hadi, M. Sukri and Mat Darus, Intan Z. and Tokhi, M. Osman and Jamid, Mohd. Fairus (2020) Active vibration control of a horizontal flexible plate structure using intelligent proportional–integral–derivative controller tuned by fuzzy logic and artificial bee colony algorithm. Journal of Low Frequency Noise Vibration and Active Control, 39 (4). pp. 1159-1171. ISSN 1461-3484

Hamdan, S. H. and Chong, William Woei Fong (2020) Simulating tribological characteristics of Palm Methyl Ester (PME) lubricated contact. In: 6th International Conference on Advances in Mechanical Engineering 2019, ICAME 2019, 14 August 2019 - 16 August 2019, Kota Kinabalu, Sabah, Malaysia.

Hamdan, S. H. and Lee, M. B. and Chong, W. W. F. (2020) Competitive molecular interaction between zinc dialkydithiophosphate (ZDDP) and methyl oleate along boundary lubrication regime. In: 6th International Conference on Advances in Mechanical Engineering 2019, ICAME 2019, 14 - 16 August 2019, Kota Kinabalu, Sabah.

Hamzah, Mohd. Syahir Anwar and Zulkifli, Amira Farhanah and Abd. Rais, Zaty Hazwanie and Abd. Razak, Saiful Izwan and Mat Nayan, Nadirul Hasraf (2020) Surface entrapment of collagen on single layer polylactic acid film containing sustainable drug delivery properties for corneal tissue engineering application. Journal of Sustainability Science and Management, 15 (3). pp. 20-35. ISSN 1823-8556

Hamzah, Norikhwan (2020) Characterization of carbon nanotube growth region in flame using wire-based macro-imaging method. PhD thesis, Universiti Teknologi Malaysia.

Hamzah, Norikhwan and Mohd. Yasin, Mohd. Fairus and Mohd. Yusop, Mohd. Zamri and Mohammad Haniff, Muhammad Aniq Shazni and Hasan, Mohd. Faizal and Tamrin, Khairul Fikri and Mohd. Subha, Nurul Adilla (2020) Effect of fuel and oxygen concentration toward catalyst encapsulation in water-assisted flame synthesis of carbon nanotubes. Combustion and Flame, 220 . pp. 272-287. ISSN 0010-2180

Hanafiah, Khairul Anwar and Mohd. Daud, Mohd. Fadzil and Mohd. Taib, Jamaludin and Dzakaria, Afandi and Abdul Rahim, Rabiatul Adibah and Rais, Hasni and Basiran, Zaim and Rahim, Norisham A. (2020) Strategies to integrate design process into TVET in conducting final year project. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Hartatiek, Hartatiek and Fahmi, Nur Kholilatul and Putra, Abdul Aziz Dwi and Yudyanto, Yudyanto and Nasikhudin, Nasikhudin and Utomo, Joko and Ahmad, Norhayati (2020) Effect of nano-hydroxyapatite (n-HAp)/PLA scaffold composites on porosity and microstructure. In: 2019 Conference on Theoretical Physics and Nonlinear Phenomena: Excursion from Vacuum to Condensed Matter, CTPNP 2019, 9 - 10 October 2019, Malang, East Java.

Harun, M. H. and Hudha, K. and Samin, P. M. and Bakar, S. A. A. and Ubaidillah, U. (2020) Stability and roll effect of the straight truck suspension system. Journal of Advanced Manufacturing Technology, 14 (1). pp. 89-100. ISSN 1985-3157

Harun, Mohd. Hanif and Abdullah, Mohd. Azman and Abu Bakar, Saiful Anuar and Mohammad Nasir, Mohd. Zakaria and W. Abdullah, W. Mohd. Zailimi and Wan Mohamad, Wan Mohd. Farid (2020) Railway vehicle stability improvement using bogie-based skyhook control. In: Proceedings of Mechanical Engineering Research Day 2020, 16 December 2020, Melaka, Malaysia.

Hashemzahi, Pooria and Azadnia, Amirhossein and Galankashi, Masoud Rahiminezhad and Syed Ahmad Helmi, Syed Ahmad Helmi and Rafiei, Farimah Mokhatab (2020) Green supplier selection and order allocation: a nonlinear stochastic model. International Journal of Value Chain Management, 11 (2). pp. 111-138. ISSN 1741-5357

Hashim, Farah Ellyza and Peyre, Oscar and Lapok, Sarah Johnson and Yaakob, Omar and Md. Din, Ami Hassan (2020) Offshore wind energy resource assessment in Malaysia with satellite altimetry. Journal of Sustainability Science and Management, 15 (6). pp. 111-124. ISSN 1823-8556

Hashim, Nazmee and Hassan, Adnan and Abdul Hamid, Mohd. Foad (2020) Predictive maintenance model for centrifugal pumps under improper maintenance conditions. In: 5th International Conference on Industrial, Mechanical Electrical, and Chemical Engineering 2019, ICIMECE 2019, 17 - 18 September 2019, Surakarta, Indonesia.

Hasim, Nurhaziqah and Azmi, Nur Syuhada and Wan Ali, Wan Fahmin Faiz and Hamzah, Esah and Yahya, Adibah and Mat Yajid, Muhammad Azizi and Nosbi, Norlin (2020) Temperature effect on pseudomonas aeruginosa growth and its presence on corrosion of steel wire rope. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 July 2019 - 24 July 2019, Kangar, Perlis, Malaysia.

Hassan, Ahmed G. and Mat Yajid, M. A. and Saud, S. N. and Abu Bakar, T. A. and Arshad, A. and Mazlan, Nurzafirah (2020) Effects of varying electrodeposition voltages on surface morphology and corrosion behavior of multi-walled carbon nanotube coated on porous Ti-30 at.%-Ta shape memory alloys. Surface and Coatings Technology, 401 . ISSN 0257-8972

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2020) Hydrogen from solar energy, a clean energy carrier from a sustainable source of energy. International Journal of Energy Research, 44 (6). pp. 4110-4131. ISSN 1099-114X

Hosseini, Seyed Ehsan and Butler, Brayden and Abdul Wahid, Mazlan (2020) Hydrogen as a battery for a rooftop household solar power generation unit. International Journal of Hydrogen Energy, 45 (48). pp. 25811-25826. ISSN 0360-3199

Hui, Y. T. and Zakuan, N. and Zhi, A. R. C. and Sulaiman, Z. and Thoo, A. C. and Mas’od, A. and Awang, S. R. and Mat Saman, M. Z. (2020) The mediating effect of sustaining lean improvement on the relationship between sustainable manufacturing practices and sustaining performance. TEST Engineering & Management, 83 . ISSN 0193 - 4120

I

Ibrahim, Mustafa K. and Saud, Safaa N. and Hamzah, E. and Nazim, E. M. (2020) Shape memory characteristics of microwave sintered porous Ti–30 at.%Ta alloy for biomedical applications. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 234 (10). pp. 1979-1989. ISSN 0954-4062

Ibrahim, Mustafa Khaleel and Saud, Safaa Najah and Hamzah, Esah and Nazim, Engku Mohamad (2020) Role of Ag addition on microstructure, mechanical properties, corrosion behavior and biocompatibility of porous Ti-30 at%Ta shape memory alloys. Journal of Central South University, 27 (11). pp. 3175-3187. ISSN 2095-2899

Ibrahim, Nasiru I. and Al-Sulaiman, Fahad A. and Saat, Aminuddin and Rehman, Shafiqur and Ani, Farid Nasir (2020) Charging and discharging characteristics of absorption energy storage integrated with a solar driven double-effect absorption chiller for air conditioning applications. Journal of Energy Storage, 29 . p. 101374. ISSN 2352-152X

Ibrahim, Nasiru Ishaq (2020) Performance simulation of a double-effect water-lithium bromide solar-assisted cooling system integrated with a storage system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Idris, Rubia and Chong, W. W. F. and Ali, A. and Idris, S. and Asik, J. A. and Hasan, M. F. and Chong, C. T. and Ani, F. N. (2020) Effect of microwave susceptor design on the heating profile of co-pyrolysis between empty fruit bunches and waste truck tire. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 December 2019 - 14 December 2019, Millenium Hilton Bangkok, Bangkok, Thailand.

Ishak, I. S. and Mansor, S. and Lazim, T. M. and Mat, S. and Md. Zain, M. Z. and Mohd. Nasir, R. E. and Mohd. Ali, Z. (2020) Experimental work on unsteady helicopter rotor hub wakes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 65 (2). pp. 314-323. ISSN 2289-7879

Isham, Muhammad Firdaus (2020) Application of variational mode decomposition in vibration analysis of machine components. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Ishartomo, Farid and Suhardi, Bambang and Mohd. Rohani, Jafri (2020) Ergonomic principles in traffic signs comprehension: A literature review. In: 5th International Conference on Industrial, Mechanical Electrical, and Chemical Engineering 2019, ICIMECE 2019, 17 - 18 September 2019, Surakarta, Indonesia.

Ismail, A. S. I. and Sze Yong, Y. and Ismail, I. and Mamat, N. S. (2020) Bubbles characterization in foam drilling fluid. International Journal of Advanced Science and Technology, 29 (3). pp. 2721-2735. ISSN 2005-4238

It, Sing Chan and Mohd. Ghazali, Normah and Zolpakar, Nor Atiqah and Mohamad, Maziah (2020) Four-variable simultaneous optimization of the cooling and acoustic power with particle swarm optimization. International Journal of Air-Conditioning and Refrigeration, 28 (2). pp. 1-10. ISSN 2010-1325

J

Jamali, A. and Mat Darus, I. Z. and Tokhi, M. O. (2020) Intelligent PID controller of flexible link manipulator with payload. In: 3rd International Conference on Mechanical, Electronics, Computer, and Industrial Technology, MECnIT 2020, 25 - 26 June 2020, Medan, Indonesia.

Jamei, Saeed and Maimun, Adi and Bilandi, Rasul Niazmand and Nor Azwadi, Nor Azwadi and Mancini, Simone and Vitiello, Luigi and De Carlini, Maria (2020) Wake behind a compound wing in ground effect. Journal of Marine Science and Engineering, 8 (3). p. 156. ISSN 2077-1312

Jamil, N. and Gholami, H. and Saman, M. Z. M. and Streimikiene, D. and Sharif, S. and Zakuan, N. (2020) Dmaic-based approach to sustainable value stream mapping: towards a sustainable manufacturing system. Economic Research-Ekonomska Istrazivanja, 33 (1). pp. 331-360. ISSN 1331677X

Jamil, Norhazrina (2020) Dmaic-based sustainable value stream mapping methodology for sustainable manufacturing improvement. PhD thesis, Universiti Teknologi Malaysia.

Januddi, Fatihhi and Harun, Muhamad Noor and Syahrom, Ardiyansyah and Bakri, Adnan and M. Alkbir, M. F. (2020) Effect of including periodic boundary condition on the fatigue behaviour of cancellous bone. International Journal of Integrated Engineering, 12 (5). pp. 70-80. ISSN 2229-838X

Johar, M. and Wong, K. J. and Rashidi, S. A. and Tamin, M. N. (2020) Effect of strain-rate and moisture content on the mechanical properties of adhesively bonded joints. Journal of Mechanical Science and Technology, 34 (5). pp. 1837-1845. ISSN 1738-494X

K

Khan, Muhammad Salman and Koloor, Seyed Saeid Rahimian and Tamin, Mohd. Nasir (2020) Effects of cell aspect ratio and relative density on deformation response and failure of honeycomb core structure. Materials Research Express, 7 (1). 015332-015332. ISSN 2053-1591

Kamarudin, Maslinda and Ahmad, Zaini and Tamin, Mohd. Nasir (2020) Residual properties of the drawn steel wires for damage-based fretting fatigue models of the wire ropes. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 July 2019 - 24 July 2019, Putra Regency Hotel, Kangar, Perlis, Malaysia.

Kamarudin, Nur Elya Mastura and Mohd. Nordin, Ili Najaa Aimi and Mohd Faudzi, Ahmad Athif and Khamis, Nurulaqilla and Muhammad Razif, Muhammad Rusydi and Zulkarnain, Noraishikin and Zainal Abidin, Amar Faiz (2020) Soft actuated foot exoskeleton for ankle rehabilitation. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.4). pp. 367-373. ISSN 2278-3091

Kamarul' Arifin, Ilya Qurratu' Ain and Lee, Kee Quen and Kang, H. S. and Tan, L. K. and Othman, Nor' Azizi and Siow, C. L. (2020) Effectiveness of splitter plate in suppressing the flow induced vibration of a circular cylinder. In: 5th International Conference on Building Materials and Construction, ICBMC 2020, 26 May 2020 - 29 May 2020, Tokyo, Japan.

Kamaruzaman, Natrah and Wisley, Mohd. Farhan and Abidin, Ummikalsom and Mohd. Sies, Mohsin and Mohd. Ruslan, Mohd. Ridhwan (2020) Effect of channel arrangement on the thermal hydraulic performance of multilayer microchannel arrays. CFD Letters, 12 (8). pp. 17-25. ISSN 2180-1363

Kamsah, Nazri and Mohamed Kamar, Haslinda and Ilham, I. N. and Norazam, Alia Sofia (2020) High-volume low-speed fan for cooling of a large enclosed space. In: 4th International Tropical Renewable Energy Conference 2019, I-TREC 2019, 14 - 16 August 2019, Bali, Indonesia.

Kang, H. S. and Kim, M. H. and Aramanadka, S. S. B. (2020) Numerical analysis on mathieu instability of a top-tensioned riser in a dry-tree semisubmersible. Journal of Offshore Mechanics and Arctic Engineering-Transactions of the Asme, 142 (2).

Kang, Hooi Siang and Choo, Hau Wei and Khor, Wei Han and Lee, Kee Quen and Tey, Wah Yen and Lee, Kiat Moon and Liu, Yu Jie and Chong, Wen Tong (2020) Dynamic behaviours of damaged stability for floating energy storage unit after accidental collision. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Karimzadeh, A. and Yahya, M. Y. and Abdullah, M. N. and Wong, K. J. (2020) Effect of stacking sequence on mechanical properties and moisture absorption characteristic of hybrid palf/glass fiber composites. Fibers and Polymers, 21 (7). pp. 1583-1593. ISSN 1229-9197

Kazeem, A. and Badarulzaman, N. A. (2020) Fit mix effect modelling of physio-mechanical properties of experimental al-zn-mg-cu alloy stir-cast from recycled beverage can. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8-9 Dec 2019, The Everly Putrajaya, Putrajaya, Malaysia.

Kazeem, A. and Badarulzaman, N. A. and Ali, W. F. F. W. (2020) Relating fractographic analysis to yield strength of novel X7475 (Al–Zn–Mg–Cu) alloys produced by recycling aluminium beverage cans. Materials Letters, 262 .

Kazeem, Abubakar and Ajala, Amkpa Job and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz and Emmanuel, Okorie Maduako (2020) Effect of annealing and artificial ageing parameters on the ultimate tensile strength and elongation of new Al-(4-5) Zn- Mg-Mn-Cu alloys fabricated using recycled beverage cans. International Journal of Integrated Engineering, 12 (8). pp. 133-140. ISSN 2229-838X

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Effect of heat treatment on modulus hardening and phase transformation in experimental 7xxx stir-cast alloy from recycled beverage cans. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 December 2019 - 10 December 2019, The Everly Hotel, Putrajaya, Malaysia.

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Linking spectrograph to mechanical and physical properties of X7475 experimental alloys produced from recycling beverage cans for bumper beam applications. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 - 24 July 2019, Kangar, Malaysia.

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2020) Optimization of wear and hardness of al Al–Zn–Mg–Cu alloy fabricated from recycled beverage can using response surface methodology. SN Applied Sciences, 2 (1210). ISSN 2523-3971

Khattak, M. A. and Zaman, S. and Kazi, S. and Ahmed, H. and Habib, H. M. and Ali, H. M. and Tamin, M. N. (2020) Failure investigation of welded 430 stainless steel plates for conveyor belts. Engineering Failure Analysis, 116 . p. 104754. ISSN 1350-6307

Khor, Wei Han and Kang, Hooi Siang and Lee, Kee Quen and Jiang, Xiaoxia and Ng, Cheng Yee and Tan, Lit Ken and Tang, Collin Howe Hing (2020) Hydrodynamic sloshing of microalgae in membrane type photobioreactor. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Koh, Celine Xian Lin and Syed Ahmad Helmi, Syed Ahmad Helmi and Hisjam, Muhammad and Ali, Ahad (2020) Implementation of lean manufacturing in an electronic assembly company. In: 5th International Conference on Industrial, Mechanical Electrical, and Chemical Engineering 2019, ICIMECE 2019, 17 - 18 September 2019, Surakarta, Indonesia.

Koloor, Seyed Saeid Rahimian and Karimzadeh, Atefeh and Yidris, Noorfaizal (2020) An energy-based concept for yielding of multidirectional FRP composite structures using a Mesoscale Lamina Damage Model. Polymers, 12 (1). p. 157. ISSN 2073-4360

L

Lai, Nai Yeen Gavin and Jayasekara, Deepesh and Wong, Kok Hoong and Yu, Lih Jiun and Kang, Hooi Siang and Pawar, Kulwant and Zhu, Yingdan (2020) Advanced automation and robotics for high volume labour-intensive manufacturing. In: 2nd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, HORA 2020, 26 - 27 June 2020, Ankara, Turkey.

Leman, Zulkarnain Ali and Mohammed Ariff, Mohd. Hatta and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Yakub, Fitri (2020) Gain scheduling model predictive path tracking controller for autonomous vehicle on highway scenario. In: 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials, ICE-SEAM 2019, 16 October 2019 - 17 October 2019, Surakarta, Indonesia.

Low, K. L. and Idris, A. and Mohd. Yusof, N. (2020) Novel protocol optimized for microalgae lutein used as food additives. Food Chemistry, 307 . ISSN 0308-8146

M

Muhamat Yain, N. and Abdul Malik, A. M. and Ali, A. and Souf Aljen, A. S. and Behrouzi, F. and Nakisa, M. (2020) Low speed vertical axis current turbine (LS-VACT): Experimental results. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Mohammed, M. A. and Uday, M. B. and Izman, S. (2020) Effects of calcination temperature and time on the ca3co4o9 purity when synthesized using starch-assisted sol-gel combustion method. Journal of Advanced Ceramics, 9 (2). ISSN 2226-4108

M. Nazari, M. N. and W. Saliman, M. A. and Ahmad, Z. A. and Lim, M. H. (2020) Effect of contact area to impact noise. International Journal of Advanced Research in Engineering and Technology (IJARET), 11 (10). pp. 991-995. ISSN 0976-6480

M. Nor, Fethma and Lim, Joong Yeon and Tamin, Mohd. Nasir and Lee, Ho Yong and Kurniawan, D. (2020) Effects of starter defect on energy release rate of three-point end-notch flexure tested unidirectional carbon fiber reinforced polymer composite. Polymers, 12 (4). pp. 1-12. ISSN 2073-4360

Mad Asasaari, S. F. and Wong, K. J. and Tamin, M. N. and Johar, M. (2020) Moisture absorption effects on the mechanical properties of carbon/epoxy composites. International Journal of Structural Integrity, 11 (4). pp. 605-614. ISSN 1757-9864

Majeed, Faraj Saeid Adrees and Mohd. Yusof, Nordin and Suhaimi, Mohd. Azlan and Ahmad, Rosli and Asmael, Mohammed Basher and Yusof, Mohd. Sallehuddin (2020) Outcome of mix Ce and Er addition on solidification microstructure of the LM25 ( Al-7Si-alloy). In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Majeed, Faraj Saeid Adrees and Mohd. Yusof, Nordin and Suhaimi, Mohd. Azlan and Elsiti, Nagwa Mejid and A. Aziz, Siti Norbiha (2020) Effect of paraffin oil with XGnP and Fe2O3 nanoparticles on tribological properties. In: 1st International Conference on Advanced Light-Weight Materials and Structures, ICALMS 2020, 6 March 2020 - 7 March 2020, Hyderabad, India.

Majeed, Neelam Jehan and Mat, Shabudin and Mohamed Radzi, Nor Haizan (2020) Aerodynamic characteristics and laminar bubble separation study on a generic light aircraft model. Journal of Aeronautics, Astronautics and Aviation, 52 (4). pp. 347-360. ISSN 1990-7710

Maldar, N. R. and Ng, C. Y. and Lee, W. E. and Oguz, E. and Fitriadhy, A. and Kang, H. S. (2020) A comparative study on the performance of a horizontal axis ocean current turbine considering deflector and operating depths. Sustainability (Switzerland), 12 (8). ISSN 2071-1050

Mansor, M. A. and Ahmad, Z. and Abdullah, M. R. (2020) Experimental studies on the impact characteristics of seamless fibremetal laminate (FML) tubes. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Mansor, M. A. and Ahmad, Zaini and Abdullah, M. R. (2020) Experimental studies on the impact characteristics of seamless fibre metal laminate (FML) tubes. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 December 2019 - 10 December 2019, The Everly Hotel, Putrajaya, Malaysia.

Maseri, Siti Zakiah and Hadi, Muhamad Sukri and Jamali, Annisa and Mohd. Yatim, Hanim and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2020) A single objective flower pollination algorithm for modeling the horizontal flexible plate system. In: 2nd International Conference on Applied Engineering, ICAE 2019, 2 - 3 October 2019, Batam, Indonesia.

Mat Jusoh, Muhamad Shahirul and Yahya, Mohd. Yazid and Israr Ahmad, Haris Ahmad (2020) Strain rates effect of dynamic compression properties of E-glass / jute composite. Journal of Mechanical Engineering and Sciences, 14 (3). pp. 7162-7169. ISSN 2289-4659

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Ngadiman, N. H. A. and Alkahari, M. R. (2020) Evaluation of geometrical benchmark artifacts containing multiple overhang lengths fabricated using material extrusion technique. Journal Of Mechanical Engineering And Sciences, 14 (3). pp. 7296-7308. ISSN 2289-4659

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Yusof, Yusri and Wahab, Md. Saidin (2020) Overhang analysis fabricated using fused deposition modeling technique. Journal of Advanced Industrial Technology and Application, 1 (1). pp. 38-47. ISSN 2716-7097

Md. Arif, Ummul Ghafir and Loo, Ching-Yun and Kang, Hooi-Siang and Punurai, Wonsiri and Lee, Kee Quen and Lai, Gavin Nai-Yeen and Chong, Wen-Tong (2020) Suppression of hydrodynamic sloshing in liquefied natural gas tank with floating baffle: Experimental and numerical studies. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Mdd. Nordin, Nur Naqiuddin and Ahmad, Zaini and Syed Abdullah, Syed Idros and Ahmad, Zair Asrar (2020) An overview of buckling, burst and corrosion analyses on pre-stressed thermosetting glass fiber-reinforced polymer tubular structures. In: 8th Asia Conference on Mechanical and Materials Engineering, ACMME 2020, 11 - 14 June 2020, Singapore.

Minhat, M. S. and Mohd. Subha, N. A. and Hassan, F. and Nordin, N. M. (2020) An improved control rod selection algorithm for core power control at TRIGA PUSTAPI reactor. Journal of Mechanical Engineering and Sciences, 14 (1). pp. 6362-6379. ISSN 2289-4659

Mohamed, Mohd. Firdaus and Mohd. Hanif, Asyikin Sasha and Faudzi, Ahmad Athif (2020) Segmentation of a soft body and its bending performance using thin Mckibben muscle. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7533-7541. ISSN 2229-8649

Mohamed, Norirda (2020) Development of remanufacturing quality practices framework for Malaysia automotive industry. PhD thesis, Universiti Teknologi Malaysia.

Mohamed Kamar, Haslinda and Wong, Keng Yinn and Kamsah, Nazri (2020) The effects of medical staff turning movements on airflow distribution and particle concentration in an operating room. Journal of Building Performance Simulation, 13 (6). pp. 684-706. ISSN 1940-1507

Mohamed Takey, Mohamed Takey and Mat Lazim, Tholudin and Ishak, Iskandar Shah and Nik Mohd., N. A. R. and Othman, Norazila (2020) Computational investigation of a wind turbine shrouded with a circular ring. CFD Letters, 12 (10). pp. 40-51. ISSN 2180-1363

Mohammad, Mahadhir (2020) Parametric studies on muffler internal geometry related to sound transmission loss and pressure drop. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Mohammed, M. A. and Uday, M. B. and Izman, S. (2020) Enhanced thermoelectric performance of Ca3Co4O9 doped with aluminum. Journal of Materials Science: Materials in Electronics, 31 (19). pp. 16569-16582. ISSN 0957-4522

Mohammed Razzaq, Alaa and Majid, Dayang Laila and Ishak, Mohamad Ridzwan and Basheer, Uday Muwafaq (2020) Mathematical modeling and analysis of tribological properties of aa6063 aluminum alloy reinforced with fly ash by using response surface methodology. Crystals, 10 (5). p. 403. ISSN 2073-4352

Mohd. Fuad, Muhammad Ariff Hanaffi and Mohd. Faizal, Hasan and Abdul Rahman, Mohd. Rosdzimin and Latiff, Z. A. (2020) Torrefaction of densified empty fruit bunches with addition of plastics waste. Biofuels, 11 (4). pp. 491-501. ISSN 1759-7269

Mohd. Fuad, Muhammad Ariff Hanaffi and Razali, Mohamad Muslihuddin and Mohamad Izal, Zaitul Nadiah and Mohd. Faizal, Hasan and Ahmad, Norhayati and Abdul Rahman, Mohd. Rosdzimin and Rahman, Md. Mizanur (2020) Torrefaction of briquettes made of palm kernel shell with mixture of starch and water as binder. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 70 (2). pp. 21-36. ISSN 2289-7879

Mohd. Jailani, M. H. and Johar, M. and Gan, K. W. and Wong, K. J. (2020) Displacement rate dependence of acrylic adhesive bonded carbon/epoxy composite joints under mode I loading. Plastics, Rubber and Composites, 49 (7). pp. 321-328. ISSN 1465-8011

Mohd. Mustafa, N. N. and Abdul Kadir, A. Z. and Akhmal Ngadiman, N. H. and Ma’aram, A. and Zakaria, K. (2020) Comparison of different additive manufacturing patterns on the performance of rapid vacuum casting for mating parts via the taguchi method. Journal of Mechanical Engineering and Sciences, 14 (1). ISSN 2289-4659

Mohd. Sies, Mohsin and Abdul Wahid, Mazlan (2020) Numerical investigation of the asymmetrical vortex combustor running on biogas. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 74 (1). pp. 1-18. ISSN 2289-7879

Mohd. Sofi, Muhammad Izzuddin and Chow, Zhen Pei and Wong, K. J. (2020) Study of multi-cell thin-walled tube with various configuration under lateral loading. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 December 2019 - 9 December 2019, The Everly Putrajaya, Putrajaya, Malaysia.

Mohd. Yunos, Yushazaziah and Mohd. Ghazali, Normah and Mohamad, Maziah and Pamitran, Agus Sunjarianto and Oh, Jong Taek (2020) Improvement of two-phase heat transfer correlation superposition type for propane by genetic algorithm. Heat and Mass Transfer/Waerme- und Stoffuebertragung, 56 (4). pp. 1087-1098. ISSN 0947-7411

Mohd. Yusof, Ab. Aziz and Harun, Muhamad Noor and Nasruddin, Fakhrizal Azmi and Syahrom, Ardiyansyah (2020) Rowing biomechanics, physiology and hydrodynamic: A systematic review. International Journal of Sports Medicine . 0-0. ISSN 0172-4622

Mohd. Zulkifli, I. S. and Mat Yajid, M. A. and Idris, M. H. and Uday, M. B. and Daroonparvar, M. and Emadzadeh, A. and Arshad, A. (2020) Microstructural evaluation and thermal oxidation behaviors of YSZ/NiCoCrAlYTa coatings deposited by different thermal techniques. Ceramics International, 46 (14). pp. 22438-22451. ISSN 0272-8842

Mohsenizadeh, Saeid and Ahmad, Z. and Alias, Amran (2020) Numerical prediction on the crashworthiness of circular and square thin-walled tubes with polymeric auxetic foam core. Journal of Materials Engineering and Performance, 29 (5). pp. 3092-3106. ISSN 1059-9495

Mohsenizadeh, Saeid and Ahmad, Zaini and Alias, Amran (2020) Numerical study on axial crushing of auxetic foam-filled square tube. In: 7th Asia Conference on Mechanical and Materials Engineering, ACMME 2019, 14 - 17 June 2019, Tokyo, Japan.

Mong, G. R. and Chong, C. T. and Ashokkumar, V. and Ng, J. H. and Chong, W. W. F. (2020) Determination of the activation energy and kinetics properties of algae (sargassum polycystum) via thermogravimetric analysis. Chemical Engineering Transactions, 78 . ISSN 2283-9216

Mong, G. R. and Chong, C. T. and Ng, J. H. and Lam, S. S. and Fong Chong, W. W. and Ani, F. N. (2020) Pyrolysing horse manure via microwave-induced heating for bioenergy recovery. Chemical Engineering Transactions, 78 . pp. 139-144. ISSN 2283-9216

Mong, Guo Ren (2020) Horse manure derived biofuel production via microwave induced pyrolysis. PhD thesis, Universiti Teknologi Malaysia.

Mong, Guo Ren and Chong, Cheng Tung and Ng, Jo Han and Chong, William Woei Fong and Lam, Su Shiung and Ong, Hwai Chyuan and Ani, Farid Nasir (2020) Microwave pyrolysis for valorisation of horse manure biowaste. Energy Conversion and Management, 220 . p. 113074. ISSN 0196-8904

Moradi, Mahmoud and Sharif, Safian and Nasab, Saied Jamshidi and Moghadam, Mojtaba Karami (2020) Laser surface hardening of AISI 420 steel: Parametric evaluation, statistical modeling and optimization. Optik, 224 . p. 165666. ISSN 0030-4026

Moslemi, N. and Gohari, S. and Mozafari, F. and Zardian, M. G. and Burvill, C. and Yahya, M. Y. and Ayob, A. (2020) A novel smart assistive knee brace incorporated with shape memory alloy wire actuator. Journal of Intelligent Material Systems and Structures, 31 (13). pp. 1543-1556. ISSN 1045-389X

Moslemi, N. and Golzardian, G. and Redzuan, N. and Mozafari, F. and Ayob, A. (2020) Optimization procedure for parameter determination of caboche kinematic hardening model. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8-9 Dec 2019, The Everly Putrajaya, Putrajaya, Malaysia.

Mosleni, N. and Mozafari, F. and Abdi, B. and Gohari, S. and Redzuan, N. and Burvill, C. and Ayob, A. (2020) Uniaxial and biaxial ratcheting behavior of pressurized aisi 316l pipe under cyclic loading: experiment and simulation. International Journal of Mechanical Sciences, 179 . ISSN 0020-7403

Msuku, G. K. C. and Husny, Z. J. B. I. M. and Mehdi, M. (2020) Transportation challenges in fertilizer supply chain in Malawi. International Journal of Supply Chain Management, 9 (1). pp. 356-365. ISSN 2051-3771

Muarat, Nurul Farhanah (2020) Acoustic characteristics of deformable origami structures for multi-purpose hall. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Murizan, Nur Ilyana Sahira and Mustafa, Nur Syahirah and Ngadiman, Nor Hasrul Akhmal and Mohd. Yusof, Noordin and Idris, Ani (2020) Review on nanocrystalline cellulose in bone tissue engineering applications. Polymers, 12 (12). pp. 1-22. ISSN 2073-4360

Mustafa, N. S. and Ngadiman, N. H. A. and Abas, M. A. and Noordin, M. Y. (2020) Application of box-Behnken analysis on the optimisation of air intake system for a naturally aspirated engine. International Journal of Automotive and Mechanical Engineering, 17 (2). pp. 8029-8042. ISSN 2229-8649

Mustaffa Kamal, I. Z. and Ismail, A. Imran and Abdullah, M. Naim and Ahmed, Y. Adnan (2020) Influence of the transom immersion to ship resistance components at low and medium speeds. Journal of Naval Architecture and Marine Engineering, 17 (2). pp. 165-182. ISSN 1813-8535

N

Nasir, Najah and Samsudin, Ruhaidah and Shabri, Ani (2020) Pre-processing streamflow data through singular spectrum analysis with fuzzy C-means clustering. In: 2nd Joint Conference on Green Engineering Technology and Applied Computing 2020, IConGETech 2020 and International Conference on Applied Computing 2020, ICAC 2020, 4 - 5 February 2020, Bangkok, Thailand.

Nejad, A. L. and Alipour, R. and Shokri Rad, M. and Yahya, M. Y. and Koloor, S. S. R. (2020) Using finite element approach for crashworthiness assessment of a polymeric auxetic structure subjected to the axial loading. Polymers, 12 (6). ISSN 2073-4360

Ngah, R. and Wong, K. Y. (2020) Linking knowledge management to competitive strategies of knowledge-based smes. Bottom Line, 33 (1). pp. 42-59. ISSN 0888-045X

Nia, A. B. and Nejad, A. F. and Xin, L. and Ayob, A. and Yahya, M. Y. (2020) Energy absorption assessment of conical composite structures subjected to quasi-static loading through optimization based method. Mechanics and Industry, 21 (1). ISSN 2257-7777

Nik Aziz, N. N. F. A. and Said, M. and Abdul Malik, M. S. and Mohd. Jaafar, M. N. and Othman, N. and Ariffin, M. K. and Hassan, M. F. (2020) Combustion study of waste cooking oil biodiesel in an oil burner. Jurnal Teknologi . pp. 93-98. ISSN 0127-9696

Noor Hatem, Noor Hatem and Yusof, Yusri and A. Kadir, Aini Zuhra and Mohammed, M. A. (2020) A review of tool path optimization in CNC machines: Methods and its applications based on artificial intelligence. International Journal Of Advanced Science And Technology, 29 (4). pp. 3368-3380. ISSN 2207-6360

Noor Hatem, Noor Hatem and Yusof, Yusri and A. Kadir, Aini Zuhra and Mohammed M. A., Mohammed M. A. (2020) Reviewing of STEP-NC standards related to manufacturing industries. International Journal Of Scientific & Technology Research, 9 (4). pp. 99-104. ISSN 2277-8616

Noordin, M. A. and Rahim, R. A. A. and Roslan, A. N. H. and Ali, I. A. and Syahrom, A. and Saad, A. P. M. (2020) Controllable macroscopic architecture of subtractive manufactured porous iron for cancellous bone analogue: computational to experimental validation. Journal of Bionic Engineering, 17 (2). pp. 357-369. ISSN 1672-6529

Norazam, Alia Sofia (2020) Numerical study on the effects of regeneration temperature on dehumidification performance of desiccant materials. Masters thesis, Universiti Teknologi Malaysia.

Nosbi, Norlin and Ahmad Marzuki, Haslan Fadli and Zakaria, Muhammad Razlan and Wan Ali, Wan Fahmin Faiz and Javed, Fatima and Ibrar, Muhammad (2020) Structure property investigation of glass-carbon prepreg waste-polymer hybrid composites degradation in water condition. Processes, 8 (11). pp. 1-13. ISSN 2227-9717

O

Opia, Anthony Chukwunonso and Mohd. Kameil, Abdul Hamid and Che Daud, Zul Hilmi and Mamah, Stanley Chinedu and Izmi, Mazali Izhari and Abd. Rahim, Abu Bakar (2020) Tribological properties enhancement through organic carbon nanotubes as nanoparticle additives in boundary lubrication conditions. Jurnal Tribologi, 27 . pp. 116-131. ISSN 2289-7232

Othman, Norazila and Md. Zain, Mohd. Zarhamdy and Ishak, Iskandar Shah and Abu Bakar, Abdul Rahim and Ab. Wahid, Mastura and Mohamad, Maziah (2020) A colour recognition device for the visually disabled people. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). pp. 1322-1329. ISSN 2502-4752

P

Permatasari, Rosyida and M. Jaafar, M. N. (2020) Carbon emissions of palm shell combustion in fluidized bed. International Journal of Scientific and Technology Research, 9 (4). pp. 1184-1187. ISSN 2277-8616

Prakoso, Akbar Teguh and Ichsan, Achmad Rendiko and Syahrom, Ardiyansyah and Md. Saad, Amir Putra and Abdul Wahab, Abdul Hadi and Sulong, M. A. and Mohd Ghazali, F. A. and Basri, Hasan (2020) Mechanical degradation model of porous fe scaffold: simulation approach. In: 3rd Forum in Research, Science, and Technology International Conference, FIRST 2019, 9 - 10 October 2019, South Sumatera, Indonesia.

Prawoto, Yunan and Ahmad, Zaini and Suhartono, H. Agus (2020) Quantitative fracture mechanics approach to fatigue life improvement by shot peening applications. International Journal of Metallurgy and Metal Physics, 5 (2). pp. 1-11. ISSN 2631-5076

Q

Quen, L. K. and Abu, A. and Kato, N. and Muhamad, P. and Siang, K. H. and Hee, L. M. and Rahman, M. A. A. (2020) Vortex-induced vibration characteristics of a low-mass-ratio flexible cylinder. Structural Engineering and Mechanics, 75 (5). ISSN 1225-4568

R

Rahman, M. N. and Wahid, M. A. and Mohd. Yasin, M. F. (2020) Predictive numerical analysis on the fuel homogeneity in a Rotating Detonation Engine (RDE) implementing radially-entered fuel injection scheme. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Rahman, N. A. and Hasan, M. F. and Nyakuma, B. B. and Rahman, M. R. A. and Rahman, M. M. and Osman, S. A. and Bosiran, M. A. and Abdullah, T. A. T. (2020) Characteristics of densified oil palm empty fruit bunches blended with carbon nanotube particles. Annales de Chimie: Science des Materiaux, 44 (1). ISSN 0151-9107

Ramadhoni, Tri Satya and Syahrom, A. and Md. Saad, Amir Putra and Prakoso, A. T. and Wicaksono, D. and Basri, Hasan (2020) The analysis of wear on artificial hip joint with dimple on femoral surface. In: 3rd Forum in Research, Science, and Technology International Conference, FIRST 2019, 9 - 10 October 2019, South Sumatera, Indonesia.

Ramlan, N. A. and Yahya, W. J. and Ithnin, A. M. and Abd. Kadir, H. and Abu Kassim, K. A. and Abdul Rahman, H. and Ezzat Chan, A. F. and Mazlan, N. A. and Abdul Rashid, M. A. and Sugeng, D. A. (2020) Emissions and performance analysis of diesel powered road vehicle equipped with real-time non-surfactant emulsion fuel supply system. Fuel, 273 . ISSN 0016-2361

Rangappa, Ravichandra and Rajoo, S. and Samin, P. M. and Rajesha, S. (2020) Compactness analysis of PCM-based cooling systems for lithium battery operated vehicles. International Journal of Energy and Environmental Engineering, 11 (2). pp. 247-264. ISSN 2008-9163

Rangappa, Ravichandra and Rajoo, Srithar and Samin, P. M. and Rajesha, S. (2020) Compactness analysis of PCM-based cooling systems for lithium battery-operated vehicles. International Journal of Energy and Environmental Engineering, 11 (2). pp. 247-264. ISSN 2008-9163

Rashid, S. A. and Wahab, M. H. and Wan Rani, W. N. M. B. (2020) An analysis of safety perception in the street of Kuala Lumpur. Journal of Critical Reviews, 7 (5). pp. 52-55. ISSN 2394-5125

Razak, M. F. A. and Osnin, N. A. and Rahman, N. S. F. A. and Hamid, S. A. and Saman, A. K. A. (2020) Safety assessment of passenger boat and houseboat at Temenggor Lake, Malaysia. International Journal of Scientific and Technology Research, 9 (5). pp. 262-266. ISSN 2277-8616

Redzuan, N. and Rabbi, M. R. and Agun, L. and Ahmad, N. and Zakaria, K. and Sirat, R. M. and Saad, R. M. and Yasak, R. (2020) Development of simultaneous substrate mixer and cold atmospheric plasma treatment for mushroom cultivation. In: 5th International Conference on Industrial, Mechanical Electrical, 17 - 18 September 2019, Surakarta, Indonesia.

Rejab, N. A. and Su, N. K. and Wan Ali, W. F. F. and Ain, M. F. and Ahmad, Z. A. and Abdullah, N. S. (2020) Structural characteristic and dielectric properties of zirconia toughened alumina. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23-24 July 2019, Kangar, Perlis.

Roslan, Muhammad Faizullizam and Veza, Ibham and Muhamad Said, Mohd. Farid (2020) Predictive simulation of single cylinder n-butanol HCCI engine. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Rozaini, Ahmad Humaizi (2020) Modelling and control of an electro-mechanical drum parking brake system for vehicle rollaway prevention. PhD thesis, Universiti Teknologi Malaysia.

S

Solangi, K. H. and Sharif, S. and Nizamani, Bilal (2020) Effect of tube material on convective heat transfer of various nanofluids. Journal of Thermal Analysis and Calorimetry, 140 (1). pp. 63-77. ISSN 1388-6150

Siaw, W. C. and Musram Rakunman, M. R. and Kamaruzaman, N. and Tsuji, T. and Abdul Manaf, N. (2020) Medical staff’s posture on airflow distribution and particle concentration in an operating room. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Saad Elmunafi, Mohamed Handawi and Noordin, M. Y. and Elshwain, Amad Elddein and Kurniawan, D. (2020) Influence of cutting condition on chip morphology when turning hardened stainless steel using coated carbide cutting tools under minimum quantity of lubrication. In: 1st International Seminar on Advances in Metallurgy and Materials, i-SENAMM 2019, 12 - 13 December 2019, Jakarta, Indonesia.

Said, M. and Imai, M. and Mat, S. and Nasir, N. and Kasim, K. A. and Nik Mohd., N. A. R. and Mansor, S. (2020) Tuft flow visualisation on UTM-LST VFE-2 delta wing model configuration at high angle of attacks. International Journal of Automotive and Mechanical Engineering, 17 (3). pp. 8214-8223. ISSN 2229-8649

Said, M. A. Meor and Mohd. Sohimin, M. H. F. and Abu Husain, N. and Abd. Rahman, B. and Tuan Kamaruddin, T. N. A. and Mohamad Jamil, S. N. and Balaka, R. (2020) Rearward visibility technology in ASEAN market. Journal Of The Society Of Automotive Engineers Malaysia, 4 (2). pp. 159-167. ISSN 2600-8092

Saif, Y. and Yusof, Y. and Latif, K. and Kadir, A. Z. A. and lliyas Ahmed, M. (2020) Systematic review of step-nc-based inspection. International Journal of Advanced Manufacturing Technology, 108 (11-12). pp. 3619-3644. ISSN 0268-3768

Saleh, S. and Yunus, N. Z. M. and Ahmad, K. and Ali, N. and Marto, A. (2020) Micro-level analysis of marine clay stabilised with polyurethane. KSCE Journal of Civil Engineering, 24 (3). pp. 807-815. ISSN 1226-7988

Saufi, Syahril Ramadhan and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee (2020) Gearbox fault diagnosis using a deep learning model with limited data sample. IEEE Transactions on Industrial Informatics, 16 (10). pp. 6263-6271. ISSN 1551-3203

Saufi, Syahril Ramadhan and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee (2020) Gearbox fault diagnosis using a deep learningmodel with limited data sample. IEEE Transactions on Industrial Informatics, 16 (10). pp. 6263-6271. ISSN 1551-3203

Sazali, Norazlianie and Jamaludin, Ahmad Shahir and Ngadiman, Nor Hasrul Akhmal (2020) An essential studies on tribology's: a short review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 72 (1). pp. 1-18. ISSN 2289-7879

Sazali, Norazlianie and Jamaludin, Ahmad Shahir and Ngadiman, Nor Hasrul Akhmal (2020) A major review on tribology-based materials. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 71 (2). pp. 26-37. ISSN 2289-7879

Sazali, Norazlianie and Ngadiman, Nor Hasrul Akhmal (2020) Materials for tribology's application: a mini analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 177-185. ISSN 2289-7879

Shabara, Hosam (2020) Performance of gravitational water vortex energy system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Shakil, U. A. and Hassan, S. B. A. (2020) Behavior and properties of tin slag polyester polymer concrete confined with frp composites under compression. Journal of the Mechanical Behavior of Materials, 29 . pp. 44-56. ISSN 0334-8938

Shakil, U. A. and Hassan, S. B. A. and Yahya, M. Y. and Nauman, S. (2020) Mechanical properties of electrospun nanofiber reinforced/interleaved epoxy matrix composites review. Polymer Composites, 46 (1). pp. 2288-2315. ISSN 0272-8397

Shakil, Usaid A. and A. Hassan, Shukur B. and Yahya, Mohd Y. and Nauman, Saad (2020) Mechanical properties of electrospun nanofiber reinforced/interleaved epoxy matrix composites-a review. Polymer Composites, 41 (6). pp. 2288-2315. ISSN 0272-8397

Shokravi, H. and Shokravi, H. and Bakhary, N. and Rahimian Koloor, S. S. and Petru, M. (2020) Health monitoring of civil infrastructures by subspace system identification method: an overview. Applied Sciences (Switzerland), 10 (8). ISSN 2076-3417

Soufaljen, Atef Salem Meftah (2020) Unsteady hydrodynamic effects on the dynamic performance of low speed vertical axis current turbine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Sultan, Ahmad Zubair and Sharif, Safian and Kurniawan, Denni (2020) Drilling of AISI 316L stainless steel: Effect of coolant condition on surface roughness and tool wear. In: 5th International Conference on Industrial, Mechanical Electrical, and Chemical Engineering 2019, ICIMECE 2019, 17 - 18 September 2019, Surakarta, Indonesia.

Suprayogi, Dedy Triawan (2020) The effect of tides and vessel parameters of fishing boat generated waves. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

T

Tahar, H. A. and Zaharuddin, M. F. A. and Sharif, S. and Ndaruhadi, P. Y. M. W. (2020) Effect of tool pin profile on friction stir welding of AA5083 aluminum alloy. In: 7th International Conference on Advanced Material Engineering and Technology, 29 November 2019 - 30 November 2019, Seoul.

Takeyeldein, M. M. and Mat Lazim, Tholudin and Ishak, Iskandar Shah and N. A. R., Nik Mohd. and Ali, Essam Abubakar (2020) Wind lens performance investigation at low wind speed. Evergreen, 7 (4). pp. 481-488. ISSN 2189-0420

Talib, Fadhli Muiz and Hadi, Muhamad Sukri and Mohd. Yatim, Hanim and Jamali, Annisa and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2020) Modelling of flexible manipulator system using flower pollination algorithm. In: 2nd International Conference on Applied Engineering, ICAE 2019, 2 - 3 October 2019, Batam, Indonesia.

Tang, M. S. and Abdul Kadir, A. Z. and Ngadiman, N. H. A. (2020) Simulation analysis of different bone scaffold porous structures for fused deposition modelling fabrication process. In: 5th International Conference on Mechanical Engineering Research 2019, ICMER 2019, 30 - 31 July 2019, Kuantan, Pahang.

Tey, Wah Yen and Alehossein, Habib and Qin, Zonyi and Lee, Kiat Moon and Kang, Hooi Siang and Lee, Kee Quen (2020) On stability of time marching in numerical solutions of rayleigh-plesset equation for ultrasonic cavitation. In: International Conference on Sustainable Energy and Green Technology 2019, SEGT 2019, 11 - 14 December 2019, Bangkok, Thailand.

Thamilarasan, B. and Mohd. Yusof, Nor Fasiha and Harun, Mohd. Noor (2020) Expert validation of touch point method in ideation process based on user benefit and creativity. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Thanikasalam, Kumar and Rahmat, Mohsin and Zulkifli, Abdul Majid and Mohammad Fahmi, Abdul Ghafir and Ananth, Manickam Wash (2020) Application of factor analysis in the determination of carburetor icing tendency in aviation gasoline, RON 97, RON 98, RON 100, and the blends in lycoming O-320 engine. In: SAE 2020 Automotive Technical Papers, WONLYAUTO 2020, 1 January 2020, Warrendale, Canada.

Torabizadeh, M. and Yusof, N. M. and Ma'aram, A. and Shaharoun, A. M. (2020) Identifying sustainable warehouse management system indicators and proposing new weighting method. Journal of Cleaner Production, 248 . ISSN 0959-6526

V

Veza, I. and Roslan, M. F. and Said, M. F. M. and Latiff, Z. A. (2020) Potential of range extender electric vehicles (REEVS). In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Veza, I. and Said, M. F. M. and Latiff, Z. A. (2020) Improved performance, combustion and emissions of SI engine fuelled with butanol: A review. International Journal of Automotive and Mechanical Engineering, 17 (1). pp. 7648-7666. ISSN 2229-8649

Veza, Ibham and Roslan, Muhammad Faizullizam and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain and Abas, Mohd. Azman (2020) Cetane index prediction of ABE-diesel blends using empirical and artificial neural network models. Energy Sources, Part A: Recovery, Utilization and Environmental Effects . ISSN 1556-7036

W

Wan Yahaya, Wan Mohamad Aiman and Samion, Syahrullail and Mohd. Zawawi, Fazila and Musa, Mohd. Nor and Najurudeen, Muhammad Naim Aiman (2020) The evaluation of drag and lift force of groove cylinder in wind tunnel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 41-50. ISSN 2289-7879

Wee, Ying Ci and Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Hamzah, Esah (2020) Influence of cobalt addition on microstructure and damping properties of Cu-Al-Ni shape memory alloys. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019, 23 July 2019 - 24 July 2019, Perlis, Malaysia.

Wong, King Jye and Johar, Mahzan and Koloor, Seyed Saeid Rahimian and Petru, Michal and Tamin, Mohd. Nasir (2020) Moisture absorption effects on mode II delamination of carbon/epoxy composites. Polymers, 12 (9). pp. 1-13. ISSN 2073-4360

Wong, Wai Peng and Tan, Kim Hua and Chuah, Stephanie Hui Wen and Tseng, Ming Lang and Wong, Kuan Yew and Ahmad, Shamraiz (2020) Information sharing and the bane of information leakage: a multigroup analysis of contract versus noncontract. Journal of Enterprise Information Management, 34 (1). ISSN 1741-0398

Y

Yahaya, Aiman and Samion, Syahrullail and Musa, Mohamad Nor (2020) Determination of friction coefficient in the lubricated ring upsetting with palm kernel oil for cold forging of aluminum alloys. Jurnal Tribologi, 25 . pp. 16-28. ISSN 2289-7232

Yanis, M. and Mohruni, A. S. and Sharif, S. and Yani, I. and Zahir, M. (2020) Experimental vibration study in milling thin-walled Ti6Al4V under MQL using coconut oil as cutting fluid. In: 3rd Forum in Research, Science, and Technology International Conference, FIRST 2019, 9 - 10 October 2019, South Sumatera, Indonesia.

Yu, Xiaochuan and Li, Linxiong and Xiong, Zhixin and Kang, Hooi Siang (2020) Hit probability of cylindrical objects dropped on pipelines in offshore operations. Journal of Pipeline Systems Engineering and Practice, 11 (4). p. 494. ISSN 1949-1190

Z

Zainal, Muhamad Nor Firdaus and Redzuan, Norizah and Misnal, Mohd. Fadthul Ikmal and Ahmad, Norhayati and Raja Ibrahim, Raja Kamarulzaman (2020) Steel wire cleaning using cold plasma. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 8 - 9 December 2019, Putrajaya, Malaysia.

Zainal, Muhammad Thalhah and Mohd. Yasin, Mohd. Fairus and Wan Ali, Wan Fahmin Faiz and Tamrin, Khairul Fikri and Ani, Mohd. Hanafi (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi-empirical approach. Carbon Letters, 30 (5). pp. 569-579. ISSN 1976-4251

Zainol, Z. N. and Md. Tap, M. and Kamar, H. M. and Kamsah, N. (2020) Heat transfer model for steam burn injury among fire fighter. International Journal of Recent Technology and Engineering, 8 (1). pp. 176-182. ISSN 2277-3878

Zaki, Nurul Zubaidah and Abdul Latif, Ainullotfi and Mansor, Shuhaimi (2020) Composite wing flutter analysis with variations of ribs location. Journal of Aeronautics, Astronautics and Aviation, 52 (1). pp. 57-62. ISSN 1990-7710

Zardian, Mohsen Gol and Moslemi, Navid and Mozafari, Farzin and Gohari, Soheil and Yahya, Mohd. Yazid and Burvill, Colin and Ayob, Amran (2020) Flexural and free vibration control of smart epoxy composite beams using shape memory alloy wires actuator. Journal of Intelligent Material Systems and Structures, 31 (13). pp. 1557-1566. ISSN 1045-389X

Zhang, Yan and Wang, Ning and Li, Jingyi and Mesbah, Mohsen and Wong, Kuan Yew and Fallahpour, Alireza and Nasiri-Tabrizi, Bahman and Yang, Jiangfei (2020) Mechanical properties modeling of severely plastically deformed biodegradable zk60 magnesium alloy for bone implants. Latin American Journal of Solids and Structures, 17 (5). pp. 1-21. ISSN 1679-7817

Zulhanafi, P. and Syahrullail, S. and Ahmad, M. A. (2020) The tribological performance of hydrodynamic journal bearing using bio-based lubricant. Tribology in Industry, 42 (2). pp. 278-287. ISSN 0354-8996

Zulkefli, Siti Aisyah (2020) Particle size effect on supercapacitor performance made by coconut shell activated carbon. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.