Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | E | F | H | I | J | M | N | R | S | T | Y
Number of items at this level: 32.

A

Ab Muis, Zarina and Hashim, Haslenda and Abd Manan, Zainuddin and Mohd. Taha, Faridah (2010) Optimization of biomass usage for electricity generation with carbon dioxide reduction in Malaysia. Journal of Applied Sciences, 10 (21). 2613 -2617. ISSN 1812-5654

Ab. Muis, Zarina and Hashim, Haslenda and Abd Manan, Zainuddin and F. M., Taha and P. L., Douglas (2010) Optimal planning of renewable energy-integrated electricity generation schemes with CO2 reduction target. Renewable Energy, 35 (11). 2562 - 2570. ISSN 0960-1481

Abbood, Nabeel Kadhim (2010) A software for simultaneous targeting and design of a maximum heat recovery network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abd. Rahman , Mohd. Faizal (2010) The development of novel in-line drying process in the extrusion of polypropylene-rubberwood fibers composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdul Razak, Nor Erma Shuhadah (2010) Synthesis and absorbing properties of oil palm empty fruit bunch filled poly (acrylic acid-Co-acrylamide) superabsorbent polymer composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Norhanisah (2010) Anti-aging serum formulation based on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdurahim, Mohd. Ezzad Iskandar (2010) Curing characteristics and tensile properties of natural rubber/expoxidized natural rubber-50 nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ajlia, S. A. S. H. and Abd. Majid, Fadzilah Adibah and Suvik, A. and Effendy, M. A. W. and Serati Nouri, H. (2010) Efficacy of papain-based wound cleanser in promoting wound regeneration. Pakistan Journal of Biological Sciences, 13 (12). 596 -603. ISSN 1028-8880

Alias @ Che Rashid, Noor Izawati (2010) Isolation, expression and characterization of recombinant a-L-arabinofuranosidase from aspergillus niger ATCC 120120 in pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Amri, Idral (2010) Comparison between axial and backflow model of ion exchange system for heavy metal removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Andenan, Nurnadia (2010) Injection molded silane crosslinkable rice straw/high density polyethlene biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

E

E. A., El-Hefian and El Sayed Nasef, Mohamed Mahmoud and A. H., Yahaya (2010) Preparation and characterization of chitosan/polyvinyl alcohol blends-a rheological study. E-Journal of Chemistry, 7 . S349 - S357. ISSN 0973-4945

F

Furuyado, Mami and Ahmad Zaini, Muhammad Abbas and Aikawa, Masami and Amano, Yoshimasa and Machida, Motoi (2010) Adsorption of Cd(II) on activated carbon fiber prepared from polyacrylonitrile (PAN). Journal of Environmental Chemistry, 20 (4). pp. 379-384. ISSN 1869-1099

H

Hassan, Nursia (2010) Magnetic separable photocatalyst beads for chromium (VI) reduction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan @ Md. Sani, Muhammad Hafidzuddin (2010) The effect of plastics compositions and heating rates on the microwave-induced pyrolysis of mixed plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassim, Mimi Haryani and Hurme, Markku (2010) Inherent occupational health assessment during basic engineering stage. Journal Of Loss Prevention In The Process Industries, 23 (2). pp. 260-268. ISSN 0950-4230

Hassim, Mimi Haryani and Hurme, Markku (2010) Inherent occupational health assessment during process research and development stage. Journal Of Loss Prevention In The Process Industries, 23 (1). pp. 127-138. ISSN 0950-4230

I

Ismail , Azlyana (2010) Simultaneous targeting and design of minimum mass and energy network using graphical pinch analysisapproach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

J

Jamaludin, Shafinaz (2010) Characterization, swelling behavior and field evaluation of oil palm empty fruit bunch based superabsorbent polymer composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Anwar (2010) Effect of local daily time on the stagnation temperature at the focal point of a parabolic concentrated system. Project Report. Fakulti Kejuruteraan Kimia, Skudai, Johor. (Unpublished)

Johari, Khairiraihanna (2010) Synthesis and charactrization of sulfur-functionalized spherical silica gels as mercury adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

M

Mahani, Mahani (2010) Biosorption of gold(III), palladium(II) and silver(I) from aqueous solution onto low-cost durio zibethinus husk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Nayan, Nadirul Hasraf (2010) Characterization and biodegradability of foam based on coconut flesh waste-filled high density polyethylene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

N

Nasef, Mohamed Mahmoud and Sugiarmawan, Indriani Andromeda (2010) Radiation induced emulsion grafting of glycidyl methacrylate onto high density polyethylene: a kinetic study. Journal of Fundamental Sciences, 6 (2). pp. 93-97. ISSN 1823-626X

Ngadi, Norzita and Abrahamson, John and Fee, Conan and Morison, Ken (2010) QCM-D study of ß-casein on silicate-PEG surfaces. Journal of Applied Sciences, 10 (24). 3343 -3348. ISSN 1812-5654

R

Rosli, Noor Afizah (2010) Effect of styrene maleic anhydride on poly(vinylchloride)/polystyrene blends : mechanical and thermal properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

S

Sayid Abdullah, Sharifah Husna Ajlia (2010) Formulation, efficacy and cytotoxicity study of carica papaya latex-based wound cleanser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Selamat, Siti Norina (2010) The stability of microencapsulated palm oil vitamin e concentrate using spray drying technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Susiwi, Susiwi (2010) Adsorption of metals from recovered base oil using zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Syed Mahamud, Syarifah Nuraqmar (2010) Polyamide 6 nanocomposites toughened with dynamically vulcanized epoxidized natural rubber-50. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

T

Tee , Soo Yee (2010) Cloning and biochemical characterization of recombinant xylanase from Aspergillus fumigatus RT-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Y

Yunos, Muhamad Zaini (2010) Rice straw fiber reinforced thermoplastic starch : effects of fiber content and sizes, starch type and glycerol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

This list was generated on Wed Nov 22 03:36:23 2017 +08.