Items where Division is "Mechanical Engineering" and Year is 2019

A

Abidin, U. and Majlis, B. Y. and Yunas, J. (2019) Efficient magnetic microbeads trapping using lab-on-chip magnetic separator. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1). pp. 1-11. ISSN 2289-7879

Astuti, S. and Puspita, P. S. and Putra, A. P. and Zaidan, A. H. and Fahmi, M. Z. and Syahrom, A. and Suhariningsih, Suhariningsih (2019) The antifungal agent of silver nanoparticles activated by diode laser as light source to reduce C. albicans biofilms: An in vitro study. Lasers in Medical Science, 34 (5). pp. 929-937. ISSN 0268-8921

Abubakar, Muazu and Mohd. Noor, Siti Fawziah and Ahmad, Norhayati (2019) Effect of milling time on the performance of ceramic membrane from ball clay for the treatment of nickel plating wastewater. Journal of the Australian Ceramic Society, 55 (3). pp. 667-679. ISSN 2510-1560

A. Bakir, A. and Zaman, M. and Hassan, A. and Hamid, M. F. A. (2019) Prediction of remaining useful life for mech equipment using regression. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16 July 2018 through 17 July 2018, Johor Bharu, Johor, Malaysia.

Ab. Talib, Mat Hussin and Helmi Zulkeflee, Muhamad Hakim and Mohd. Yatim, Hanim (2019) Fuzzy-skyhook controller with cuckoo search algorithm for a semi-active suspension system with magnetorheological damper. Jurnal Mekanikal, 42 (Jun). pp. 46-56. ISSN 2289-3873

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Samin, Pakharuddin (2019) Fuzzy logic with a novel advanced firefly algorithm and sensitivity analysis for semi-active suspension system using magneto-rheological damper. Journal of Ambient Intelligence and Humanized Computing, 10 (8). pp. 3263-3278. ISSN 1868-5137

Abas, M. A. and Ardani, M. I. and Mohamad, M. and Ling, C. H. and Latif, S. N. A. and Mohamad, S. M. F. S. and Halim, A. M. (2019) The efficiency of electric bus shuttle services in UTM campus: a pilot study. In: 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018, 25-26 July 2019, Sri Manja Hotel Kuantan, Malaysia.

Abdul Halim, Zulhelmi Alif and M. Yajid, M. Azizi and Idris, M. Hasbullah (2019) Effect of wash solvents on salt removal in rice husk derived nano-silica. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18 August 2018 through 19 August 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Abdul Rahman, Mohd. Rosdzimin and Baharom, Siti Noor Aliah and Mohd. Faizal, Hasan (2019) Investigation on the mass burning rate of biodiesel blended with ethanol subjected to cross airflow. International Journal of Heat and Technology, 37 (2). pp. 428-432. ISSN 0392-8764

Abdul Sani, Amiril Sahab and Abd. Rahim, Erween and Sharif, Safian and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129 . pp. 347-362. ISSN 0301-679X

Abdul Sani, Amiril Sahab and Abd. Rahim, Erween and Sharif, Safian and Sasahara, Hiroyuki (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via mql technique. Journal of Cleaner Production, 209 . pp. 947-964. ISSN 0959-6526

Abdul Wahid, Al-Shafiq (2019) Ship availability oriented contract management model for in-service support contracts of naval vessels. PhD thesis, Universiti Teknologi Malaysia.

Abdulameer, A. Z. and Buntat, Z. and Arshad, R. N. and Nawaw, Z. (2019) Electrolysis through magnetic field for future renewable energy. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S). ISSN 2277-3878

Abdullah, M. H. and Rashid, A. S. A. and Anuar, U. H. M. and Marto, A. and Abuelgasim, R. (2019) Bottom ash utilization: a review on engineering applications and environmental aspects. In: 11th International Conference on Geotechnical Engineering in Tropical Regions, GEOTROPIKA 2019 and 1st International Conference on Highway and Transportation Engineering, ICHITRA 2019, 27-28 Feb 2019, Kuala Lumpur, Malaysia.

Abdulmunem, Abdulmunem R. and Abed, Akram H. and Hussien, Hashim A. and Mohd. Samin, Pakharuddin and Abdul Rahman, Hasimah (2019) Improving the performance of solar air heater using high thermal storage materials. Annales de Chimie: Science des Materiaux, 43 (6). pp. 389-394. ISSN 0151-9107

Abdulmunem, Abdulmunem R. and Jabal, Mohammed Hassan and Mohd. Samin, Pakharuddin and Abdul Rahman, Hasimah and Hussien, Hashim A. (2019) Analysis of energy and exergy for the flat plate solar air collector with longitudinal fins embedded in paraffin wax located in baghdad center. International Journal of Heat and Technology, 37 (4). pp. 1180-1186. ISSN 0392-8764

Abu, Falah and Gholami, Hamed and Mat Saman, Muhamad Zameri and Zakuan, Norhayati and Streimikiene, Dalia (2019) The implementation of lean manufacturing in the furniture industry: a review and analysis on the motives, barriers, challenges, and the applications. Journal of Cleaner Production, 234 . pp. 660-680. ISSN 0959-6526

Ahmad, F. N. and Sazali, N. and Shalbi, S. and Ngadiman, N. H. A. (2019) Oxygen separation process using ceramic-based membrane: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 1-9. ISSN 2289-7879

Ahmad, H. H. and Rejab, N. A. and Ahmad, Z. A. and Ain, M. F. and Othman, M. and Ali, W. F. F. W. (2019) Effect of sm on yig: structural and dielectric properties evaluation. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Ahmad, N. and Sudin, I. and Ngadiman, N. H. A. (2019) Fabrication 3d tissue engineering scaffold poly(ethylene) diacrylate filled with aramid nanofiber: mechanical evaluation and toxicity. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). ISSN 2278-3075

Ahmad, N. and Sudin, I. and Ngadiman, N. H. A. (2019) Fabrication pegda/anfs biomaterial as 3d tissue engineering scaffold by dlp 3d printing tecshnology. International Journal of Engineering and Advanced Technology, 8 (6). pp. 751-758. ISSN 2249-8958

Ahmad, N. A. and Leo, P. and Ahmad, A. L. and Nur Izwanne, M. (2019) Swelling reduction of polyvinylidenefluoride hollow fiber membrane incorporated with silicoaluminophosphate-34 zeotype filler for membrane gas absorption. Separation and Purification Technology, 212 . pp. 941-951. ISSN 1383-5866

Ahmad, S. and Wong, K. Y. and Ahmad, R. (2019) Life cycle assessment for food production and manufacturing: recent trends, global applications and future prospects. In: 47th SME North American Manufacturing Research Conference, NAMRC 2019, 10-14 June 2019, Bayfront Convention Center Erie, United States.

Ahmad, S. and Wong, K. Y. and Zahid, I. and Hussain, Z. and K., M. S. and Sarfraz, M. (2019) Normalization and weighting methods for precise and standardized sustainability assessment: recent practices in manufacturing. In: 6th International Conference on Applications and Design in Mechanical Engineering 2019, 26-27 Aug 2019, Penang Island, Malaysia.

Ahmad, Shamraiz and Kuan, Yew Wong and Zaman, Babar (2019) A comprehensive and integrated stochastic-fuzzy method for sustainability assessment in the Malaysian food manufacturing industry. Sustainability (Switzerland), 11 (4). ISSN 2071-1050

Ahmad, Shamraiz and Wong, Kuan Yew (2019) Development of weighted triple-bottom line sustainability indicators for the Malaysian food manufacturing industry using the Delphi method. Journal of Cleaner Production, 229 . pp. 1167-1182. ISSN 0959-6526

Ahmad, Shamraiz and Wong, Kuan Yew and Rajoo, Srithar (2019) Sustainability indicators for manufacturing sectors: a literature survey and maturity analysis from the triple-bottom line perspective. Journal of Manufacturing Technology Management, 30 (2). pp. 312-334. ISSN 1741-038X

Ahmad Zaman, Abdul Alif and Hashim, Farah Ellyza and Yaakob, Omar (2019) Satellite-based offshore wind energy resource mapping in Malaysia. Journal of Marine Science and Application, 18 (1). pp. 114-121. ISSN 1671-9433

Aiman, Y. and Syahrullail, S. and Azhar, M. and Ummikalsom, A. and Mohd Kameil, A. H. (2019) Tribological effect of palm sterin and engine oil (CMEO) on pure aluminium pin steel disc with varies speed and constant load. Jurnal Teknologi, 81 (6). pp. 123-131. ISSN 2180-3722

Akasah, Z. A. and Nik Soh, N. M. Z. and Dullah, H. (2019) The influence of oil palm empty fruit bunch fibre geometry on mechanical performance of cement bonded fibre boards. International Journal of Mechanical Engineering and Robotics Research, 8 (4). pp. 547-552.

Al-Awad, M. A. and Ghani, Z. A. and Mat Darus, I. Z. (2019) Parametric and non-parametric identification for an automotive air conditioning system. In: 2019 International Conference on Artificial Intelligence and Advanced Manufacturing, AIAM 2019, 17-19 Oct 2019, Dublin, Ireland.

Alawi, Omer A. and Mohamed Kamar, Haslinda and Mallah, A. R. and Kazi, S. N. and Che Sidik, Nor Azwadi (2019) Thermal efficiency of a flat-plate solar collector filled with Pentaethylene Glycol-Treated Graphene Nanoplatelets: An experimental analysis. Solar Energy, 191 . pp. 360-370. ISSN 0038-092X

Ali, A. and Maimun, A. and Ahmed, Y. M. (2019) Analysis of resistance and generated wave around semi SWATH hull at deep and shallow water. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (2). pp. 247-260. ISSN 2289-7879

Ali, Mohammed A. H. and Mailah, Musa (2019) Path planning and control of mobile robot in road environments using sensor fusion and active force control. IEEE Transactions on Vehicular Technology, 68 (3). pp. 2176-2195. ISSN 0018-9545

Ali, Mohammed A. H. and Mailah, Musa (2019) A simulation and experimental study on wheeled mobile robot path control in road roundabout environment. International Journal of Advanced Robotic Systems, 16 (2). pp. 1-17. ISSN 1729-8806

Ali, N. S. and Yusof, K. M. and Othman, M. F. and Latip, R. A. and Ismail, M. S. N. (2019) Adaptive neuro fuzzy inference system (ANFIS) modelling for quality estimation in palm oil refining process. Journal of Mechanical Engineering . pp. 36-47. ISSN 1823-5514

Ali, Salah M. and Hui, K. H. and Hee, L. M. and Leong, M. Salman and Abdelrhman, Ahmed M. and Al-Obaidi, Mahdi A. (2019) Observations of changes in acoustic emission parameters for varying corrosion defect in reciprocating compressor valves. Ain Shams Engineering Journal, 10 (2). pp. 253-265. ISSN 2090-4479

Almula, T. A. D. M. S. and Khuder, A. H. and Yahya, M. Y. and Ayob, A. (2019) Numerical investigation of hybrid of eglass and basalt fiber reinforced epoxy tube pressurized internally. In: 2019 2nd International Conference on Aeronautical, Aerospace and Mechanical Engineering, AAME 2019, 26-28 July 2019, Prague, Czech Republic.

Andwari, Amin Mahmoudzadeh and Pesyridis, Apostolos and Esfahanian, Vahid and Muhamad Said, Mohd. Farid (2019) Combustion and emission enhancement of a spark ignition two-stroke cycle engine utilizing internal and external exhaust gas recirculation approach at low-load operation. Energies, 12 (4). pp. 1-16. ISSN 1996-1073

Anis, Samsol Faizal and Koyama, Motomichi and Hamada, Shigeru and Noguchi, Hiroshi (2019) Mode I fatigue crack growth induced by strain-aging in precipitation-hardened aluminum alloys. Theoretical and Applied Fracture Mechanics, 104 . p. 102340. ISSN 0167-8442

Anjomshoae, A. and Hassan, A. and Wong, K. Y. (2019) An integrated AHP-based scheme for performance measurement in humanitarian supply chains. International Journal of Productivity and Performance Management, 68 (5). pp. 938-957. ISSN 1741-0401

Anjomshoae, Ali (2019) Performance assessment scheme for disaster relief operations. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Aris, Anas Faiz and Ishak, Iskandar Shah and Ali, Airi and Othman, Norazila (2019) Pressure distribution on helicopter fuselage. Journal of Transport System Engineering, 6 (1). pp. 10-16. ISSN 2289–9790

Azizir Rahim, M. and Yusop, M. Z. M. and Othman, M. H. D. and Ibrahim, M. and Tanemura, M. (2019) In-situ transmission electron microscope: joule heating effect on graphitisation of copper incorporatedcarbon nanofiber. International Journal of Automotive and Mechanical Engineering, 16 (3). pp. 6931-6939. ISSN 2229-8649

Azlan, S. and Rahman, M. M. and Faizal, H. M. and Saat, A. and Abdul Wahid, M. (2019) Greenhouse gas (GHG) emissions from land transports in Malaysia: modelling and policy analysis. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, 23-26 July 2019, Pilsen, Czech Republic.

Azman, N. F. and Samion, S. (2019) Dispersion stability and lubrication mechanism of nanolubricants: A review. International Journal of Precision Engineering and Manufacturing - Green Technology, 6 (2). pp. 393-414. ISSN 2288-6206

Azman, N. F. and Samion, S. and Moen, M. A. A. and Abdul Hamid, M. K. and Musa, M. N. (2019) The anti-wear and extreme pressure performance of cuo and graphite nanoparticles as an additive in palm oil. International Journal of Structural Integrity, 10 (5). pp. 714-725. ISSN 1757-9864

Azzuwan, Aizat Farhan and Mazali, Izhari Izmi and Che Kob, Mohd. Salman and Che Daud, Zul Hilmi and Asus, Zainab (2019) Evaluation of DC motors for clamping force mechanism in an electro-mechanical continuously variable transmission. Journal of Transport System Engineering, 6 (1). pp. 40-44. ISSN 2289–9790

B

Bahador, Abdollah and Kariya, Shota and Umeda, Junko and Hamzah, Esah and Kondoh, Katsuyoshi (2019) Tailoring microstructure and properties of a superelastic Ti–Ta alloy by incorporating spark plasma sintering with thermomechanical processing. Journal of Materials Engineering and Performance, 28 (5). pp. 3012-3020. ISSN 1059-9495

Bahador, Abdollah and Umeda, Junko and Tsutsumi, Seiichiro and Hamzah, Esah and Yusof, Farazila and Fujii, Hidetoshi and Kondoh, Katsuyoshi (2019) Asymmetric local strain, microstructure and superelasticity of friction stir welded Nitinol alloy. Materials Science and Engineering A, 767 . p. 138344. ISSN 0921-5093

Bakhsheshi Rad, H. R. and Chen, X. B. and Ismail, A. F. and Aziz, M. and Hamzah, E. and Najafinezhad, A. (2019) A new multifunctional monticellite-ciprofloxacin scaffold: preparation, bioactivity, biocompatibility, and antibacterial properties. Materials Chemistry and Physics, 222 . pp. 118-131. ISSN 0254-0584

Basri, H. and Syahrom, A. and Ramadhoni, T. S. and Prakoso, A. T. and Ammarullah, M. I. and Vincent, Vincent (2019) The analysis of the dimple arrangement of the artificial hip joint to the performance of lubrication. In: 2nd Sriwijaya International Conference on Science, Engineering, and Technology, SICEST 2018, 15-16 Oct 2018, Palembang, Indonesia.

Behrouzi, Farshad and Ma'aram, Azanizawati (2019) Identification and ranking of specific balanced scorecard performance measures for hospitals: a case study of private hospitals in the Klang Valley area, Malaysia. International Journal of Health Planning and Management, 34 (4). pp. 1364-1376. ISSN 0749-6753

Behrouzi, Fatemeh and Nakisa, Mehdi and Maimun, Adi and Ahmed, Yasser M. and Souf Aljen, Atef Salem (2019) Performance investigation of self-adjusting blades turbine through experimental study. Energy Conversion and Management, 181 . pp. 178-188. ISSN 0196-8904

Belhocine, Ali and Wan Omar, Wan Zaidi (2019) Analytical solution and numerical approaches of the generalized Levèque equation to predict the thermal boundary layer. Ciencias Exactas Y Físicas, 11 (2). pp. 144-163. ISSN 1390-5384

Belhocine, Ali and Wan Omar, Wan Zaidi (2019) Simulative analysis of turbulent flow through a circular conduit with uniform wall temperature and constant heat flux boundary conditions. World Journal of Engineering, 16 (2). pp. 309-321. ISSN 1708-5284

Bryan, Chua and Ismail, Kamarulafizam and Mohd. Zawawi, Fazila and Mohd. Nor, Nur Safwati (2019) Traffic light dispersion control based on deep reinforcement learning. Journal of Transport System Engineering, 6 (1). pp. 45-53. ISSN 2289–9790

C

Che Harun, Arif Azizi and Mohammad, Nor Aini Huda and Mhd. Ikhwanuddin, Mhd. Ikhwanuddin and Jauhari, Iswadi and Sohaili, Johan and Kasan, Nor Azman (2019) Effect of different aeration units, nitrogen types and inoculum on biofloc formation for improvement of Pacific Whiteleg shrimp production. Egyptian Journal of Aquatic Research, 45 (3). pp. 287-292. ISSN 16874285

Chai, B. Y. B. and Chong, W. W. F. (2019) Predicting frictional losses generated by piston connecting-rod big end journal bearing for an internal combustion engine. Journal of Transport System Engineering, 6 (1). pp. 54-67. ISSN 2289–9790

Cheong, M. S. and Abas, M. A. and Tan, F. X. and Rajoo, S. and Botas, R. M. and Fujita, Y. and Yokoyama, T. and Ibaraki, S. and Ebisu, M. (2019) Steady-state, transient and WLTC drive-cycle experimental performance comparison between single-scroll and twin-scroll turbocharger turbine. In: SAE World Congress Experience, WCX 2019, 9-11 Apr 2019, Detroit, Michigan.

Chin, Kwang-Yhee and Cheng, See-Yuan and Mansor, Shuhaimi (2019) Yaw angle effect on the aerodynamic performance of hatchback vehicle fitted with wing spoiler. Malaysian Journal of Fundamental and Applied Sciences, 15 (3). pp. 389-393. ISSN 2289-5981

Chiong, Meng Choung (2019) Biodiesel combustion characteristics under reacting swirl spray condition. PhD thesis, Universiti Teknologi Malaysia.

Chiroma, A. S. and Nordin, M. S. and Ubale, M. C. (2019) Measurement model of leadership elements for integration of blended learning into technology education programme. International Journal of Engineering and Advanced Technology, 8 (5). pp. 1298-1301. ISSN 2249-8958

Chong, Cheng Tung and Chiong, Meng Choung and Ng, Jo Han and Lim, Mooktzeng and Tran, Manh Vu and Valera-Medina, Agustin and Chong, William Woei Fong (2019) Oxygenated sunflower biodiesel: spectroscopic and emissions quantification under reacting swirl spray conditions. Energy, 178 . pp. 804-813. ISSN 0360-5442

Chong, Cheng Tung and Mong, Guo Ren and Ng, Jo Han and Chong, William Woei Fong and Ani, Farid Nasir and Lam, Su Shiung and Ong, Hwai Chyuan (2019) Pyrolysis characteristics and kinetic studies of horse manure using thermogravimetric analysis. Energy Conversion and Management, 180 . pp. 1260-1267. ISSN 0196-8904

Chong, William Woei Fong and Hamdan, Siti Hartini and Wong, King Jye and Yusup, Suzana (2019) Modelling transitions in regimes of lubrication for rough surface contact. Lubricants, 7 (9). p. 77. ISSN 20754442

Chow, Zhen Pei and Ahmad, Zaini and Wong, King Jye and Israr, Haris A. (2019) Thermo-mechanical characterisation and modelling of gfrp laminated aluminium. Composites Part B: Engineering, 173 . ISSN 1359-8368

Chua, Y. L. and Osman, S. and Daud, M. F. and Hussin, W. N. W. (2019) Application of vee diagram as a problem-solving strategy in developing students' conceptual and procedural knowledge. International Journal of Innovative Technology and Exploring Engineering, 8 (10). pp. 2796-2800. ISSN 2278-3075

D

Dayaghi, E. and Rad, H. R.Bakhsheshi and Hamzah, E. and Farid, A.Akhavan and Ismail, A. F. and Aziz, M. and Abdolahi, E. (2019) Magnesium-zinc scaffold loaded with tetracycline for tissue engineering application: In vitro cell biology and antibacterial activity assessment. Materials Science and Engineering C, 102 . pp. 53-65. ISSN 0928-4931

Dahlan, A. A. and Muhamad Said, M. F. and Latiff, A. and Mohd. Perang, M. R. and Abu Bakar, S. A. and Abdul Jalal, R. I (2019) Acoustic study of an air intake system of si engine using 1-dimensional approach. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6281-6300. ISSN 2229-8649

Dandan, M. A and Yahaya, A. and Syahrullail, S. (2019) The effect of the different percentage of pour point depressant (PPD) on the tribological properties of palm kernel oil. Tribology in Industry, 41 (3). ISSN 0354-8996

Dandan, M. A. and Musa, M. N. and Samion, S. and Yahaya, W. M. A. W. and Issham, M. A. and Zawawi, F. M. (2019) Evaluation of kapok fiber and gypsum mixture to improve fire resistance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). pp. 276-286. ISSN 2289-7879

Dandan, M. A. and Samion, S. and Azman, N. F. and Mohd Zawawi, F. and Abdul Hamid, M. K. and Musa, M. N. (2019) Performance of polymeric viscosity improver as bio- lubricant additives. International Journal of Structural Integrity, 10 (5). pp. 634-643. ISSN 1757-9864

Dandan, M. A. and Samion, S. and Musa, M. N. and Zawawi, F. M. (2019) Evaluation of lift and drag force of outward dimple cylinder using wind tunnel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1). pp. 48-56. ISSN 2289-7879

Dandan, M. A. and Samion, S. and Yahaya, W. M. A. W. and Had, F. (2019) Tribological analysis of modified rbd palm kernel containing anti-oxidant additive using four-ball tribotester. ournal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). ISSN 2289-7879

Dandan, Muhammad Arif (2019) Friction and wear analysis of palm kernel methyl ester containing a polymeric viscosity index improver. Masters thesis, Universiti Teknologi Malaysia.

Dandan, Muhammad Arif and Samion, Syahrullail and Wan Yahaya, Wan Mohamad Aiman and Hadi, Faris (2019) The tribological performance of modified RBD palm kernel oil under extreme pressure load test. Jurnal Tribologi, 22 . pp. 32-39. ISSN 2289-7232

Dani, Airul Amin and Jamaluddin, Nor Ashiqeen and Abu Hassan, Shukur and Yahya, Mohd. Yazid (2019) Modulus Effect on Local Load Distribution for FRP/Steel Bonded Joint. In: 12th International Civil Engineering Post Graduate Conference, SEPKA 2018 and 3rd International Symposium on Expertise of Engineering Design, ISEED 2018, 27 - 28 August 2018, Johor, Malaysia.

Daud, Z. H. C. and Asus, Z. and Mazali, I. I. and Abdul Hamid, M. K. and Doumin, A. M. and Yakub, F. (2019) Experimental study of lithium-ion battery thermal behaviour under abuse discharge condition. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 102-111. ISSN 2289-7879

Doumin, A. M. and Daud, Z. H. C. and Asus, Z. and Mazali, I. I. and Hamid, M. K. A. and Said, M. F. M. and Chrenko, D. (2019) Recent studies on lithium-ion battery thermal behaviour for electric and hybrid electric vehicles: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 262-272. ISSN 2289-7879

E

El Fezazi, Nabil and Tissir, El Houssaine and El Haoussi, Fatima and Bender, Fernando Augusto and Husain, Abdul Rashid (2019) Controller synthesis for steer-by-wire system performance in vehicle. Iranian Journal of Science and Technology - Transactions of Electrical Engineering, 43 (4). pp. 813-825. ISSN 2228-6179

Elnobi, Sahar and Sharma, Subash and Ibrahim Araby, Mona and Paudel, Balaram and Kalita, Golap and Mohd. Yusop, Mohd. Zamri and Ayhand, Muhammed Emre and Tanemura, Masaki (2019) Room-temperature graphitization in a solid-phase reaction. RSC Advances, 10 (2). pp. 914-922. ISSN 2046-2069

Empaling, S. and Md. Khudzari, A. Z. and Kadir, M. R. A. and Osman, K. and Hudzari, A. H. M. and Padzillah, M. H. and Talib, I. A. (2019) Spiral groove bearing geometry variation effect on left ventricular assist device impeller performance. CFD Letters, 11 (1). pp. 86-101. ISSN 2180-1363

F

Fazil, A. D. M. and Fawzi, M. and Osman, A. and Ismail, M. M. and Muhamad Said, M. F. (2019) Potential consumer assessment on the usage of diesel-cng dual fuel vehicle in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 175-184. ISSN 2289-7879

Fong, J. Y. and Chong, W. W. F. (2019) Tribological analysis on the effect of heat transfer towards engine in-cylinder friction. Journal of Transport System Engineering, 6 (1). pp. 17-32. ISSN 2289–9790

Fuad, M. A. H. M. and Faizal, H. M. and Ani, F. N. (2019) Experimental investigation on water washing and decomposition behaviour for empty fruit bunch. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 207-219. ISSN 2289-7879

G

Gholami, Ahmadali and Mohammed, Hussein A. and Wahid, Mazlan A. and Khiadani, Mehdi (2019) Parametric design exploration of fin-and-oval tube compact heat exchangers performance with a new type of corrugated fin patterns. International Journal of Thermal Sciences, 144 . pp. 173-190. ISSN 1290-0729

Galankashi, M. R. and Helmi, S. A. and Abdul Rahim, A. R. and Rafiei, F. M. (2019) Agility assessment in manufacturing companies. Benhmarking, 26 (7). ISSN 1463-5771

Ghazali, A. D. and Wahid, M. A. and Mazlan, M. A. and Saat, A. and Yasin, M. F. M. and Rahman, M. and Natrah, K. and Zain, Z. M. and Ardani, I. and Kasani, A. (2019) Development of rotating supersonic combustion engine with swirling air-fuel injection. In: 10th International Meeting of Advances in Thermofluids - Smart City: Advances in Thermofluid Technology in Tropical Urban Development, IMAT 2018, 16-17 Nov 2018, Grand Inna Hotel Kuta, Bali, Indonesia.

Ghodsiyeh, Danial and Akbarzadeh, Saleh and Izman, Sudin and Moradi, Mona (2019) Experimental investigation of surface integrity after wire electro-discharge machining of Ti–6Al–4V. Sadhana - Academy Proceedings in Engineering Sciences, 44 (9). p. 196. ISSN 0256-2499

Gholami, Hamed and Jamil, Norhazrina and Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Sharif, Safian and Awang, Siti Rahmah and Sulaiman, Zuraidah (2019) Social value stream mapping (Socio-VSM): methodology to societal sustainability visualization and assessment in the manufacturing system. IEEE Access, 7 . pp. 131638-131648. ISSN 2169-3536

Gholamkhasi, A. and Syed Hassan, S. H. and Abdul Kadir, A. Z. (2019) Reducing carbon emission by two dispatching rules for multi-objective flexible job shops. Journal of Environmental Treatment Techniques, 7 (3). pp. 250-259. ISSN 2309-1185

H

Haghighati, R. and Hassan, A. (2019) Feature extraction in control chart patterns with missing data. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16 July 2018 through 17 July 2018, Johor Bharu, Johor, Malaysia.

Haghighati, Razieh (2019) Control chart patterns recognition with constrained data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Hamzah, N. and Mohd. Yasin, M. F. and Mohd. Yusop, M. Z. and Saat, A. and Mohd. Subha, N. A. (2019) Growth region characterization of carbon nanotubes synthesis in heterogeneous flame environment with wire-based macro-image analysis. Diamond and Related Materials, 99 . p. 107500. ISSN 0925-9635

Haniff, Mohamad Fadzli and Selamat, Hazlina and Khamis, Nuraqilla and Alimin, Ahmad Jais (2019) Optimized scheduling for an air-conditioning system based on indoor thermal comfort using the multi-objective improved global particle swarm optimization. Energy Efficiency, 12 (5). pp. 1183-1201. ISSN 1570-646X

Harun, M. Hafiz and Samin, P. M. and Hudha, K. and A. Bakar, S. A. and Md. Saad, A. (2019) Modelling and verification of tractor ride model. In: 1st International Postgraduate Conference on Mechanical Engineering, IPCME 2018, 31 October 2018 through 31 October 2018, Universiti Malaysia Pahang (UMP) Pekan, Pahang, Malaysia.

Hasan, H. S. and Hussein, M. and Mad Saad, S. and Mat Dzahir, M. A. (2019) Graphical user interface (gui) for local positioning system based on labview. nternational Journal of Machine Learning and Computing, 9 (2). pp. 236-241. ISSN 2010-3700

Hasmuni, Nur Farhana (2019) Structure and electrical conductivity of polymer based graphene-carbon nanotubes composite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Hassan, A. W. and Noordin, M. Y. and Izman, S. and Denni, K. (2019) Modification of an electroplated nickel interlayer surface by annealing heat treatment for diamond deposition on tungsten carbide. Metallography, Microstructure, and Analysis, 8 (2). ISSN 2192-9262

Hassim, M. H. and Idris, M. H. and Yajij, M. A. M. and Samion, S. (2019) Mechanical and wear behaviour of nanostructure tio2-ag coating on cobalt chromium alloys by air plasma spray and high velocity oxy-fuel. Journal of Materials Research and Technology, 8 (2). pp. 2290-2299. ISSN 2238-7854

Heng, E. W. and Zainal, M. T. and Yasin, M. F. M. and Hamzah, N. (2019) Effects of flame structure and flame strain on the growth region of carbon nanotubes in counter-flow diffusion flame. CFD Letters, 11 (6). pp. 72-85. ISSN 2180-1363

Heydari Meybodi, Mahdi and Ayatollahi, Majid Reza and Berto, Filippo and Yahya, M. Yazid (2019) Rupture assessment of rubber/clay nanocomposites containing a crack by means of an energy-based fracture criterion. Archives of Civil and Mechanical Engineering, 19 (4). pp. 1458-1467. ISSN 1644-9665

Hikmawati, D. and Maulida, H. N. and Putra, A. P. and Budiatin, A. S. and Syahrom, A. (2019) Synthesis and characterization of nanohydroxyapatite-gelatin composite with streptomycin as antituberculosis injectable bone substitute. International Journal of Biomaterials . ISSN 1687-8787

Hisam, M. J. and Sharif, S. and Suhaimi, M. A. and Kurniawan, D. and Nor, F. M. and Shayfull, Z. (2019) Peri-implant bone biomechanics featuring short implant design. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 April 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Hisam, Muhammad Juzaili and Zaman, Izzuddin and Sharif, Safian and Kurniawan, Denni and M. Nor, Fethma (2019) Finite element analysis of mini implant biomechanics on peri-implant bone. In: 14th Global Congress on Manufacturing and Management, GCMM 2018, 5 - 7 December 2018, Brisbane, Australia.

Hong, Y. T. and Idris, M. H. and Ali, W. F. F. W. and Kadir, M. R. A. (2019) Evaluation of as cast aluminium alloy tubes fabricated by using horizontal true centrifugal casting technique. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Hussain, A. K. and Al Naib, U. M. B. (2019) Recent developments in graphene based metal matrix composite coatings for corrosion protection application: A review. Journal of Metals, Materials and Minerals, 29 (3). pp. 1-9. ISSN 2630-0508

Hussain, Ahmed Khalid and Sudin, Izman and Basheer, Uday M. and Mohd. Yusop, Mohd. Zamri (2019) A review on graphene - based polymer composite coatings for the corrosion protection of metals. Corrosion Reviews, 37 (4). pp. 343-363. ISSN 0334-6005

I

Ibrahim, I. N. and Sazali, N. and Jamaludin, A. S. and Ramasamy, D. and Soffie, S. M. and Othman, M. H. D. (2019) A review on vehicle radiator using various coolants. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 59 (2). pp. 330-337. ISSN 2289-7879

Isa, K. M. and Osman, K. and Yahya, A. and Ghaffar, Z. A. and Hamid, A. H. A. and Kasolang, S. (2019) Studies on the spray characteristics of pressure-swirl atomizers for automatic hand sanitizer application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (1). pp. 51-64. ISSN 2289-7879

Ishak, F. I. and Ma’Aram, A. and Sirat, R.M. and Baba, A. A. M. (2019) Preliminary framework of logistics performance measurement systems for ocean freight industry. International Journal of Innovative Technology and Exploring Engineering, 8 (7). pp. 285-290. ISSN 2278-3075

Isham, M. F. and Leong, M. S. and Hee, L. M. and Ahmad, Z. A. (2019) Iterative variational mode decomposition and extreme learning machine for gearbox diagnosis based on vibration signals. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4477-4492. ISSN 2289-4659

Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohamed, Mohd. Ambri and Mohd. Yasin, Mohd. Fairus and Mohd. Abid, Mohd. Asyadi Azam and Yaacob, Iskandar Idris and Md. Dine, Muhamad Faiz and Ani, Mohd. Hanafi (2019) Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9 (36). pp. 21000-21008. ISSN 2046-2069

Ismail, N. and Ahmad, M. Z. and Hussain, M. N. and Ariffin, A. N. and Zainol, I. (2019) Modelling of water supply cost for offshore platforms. International Journal of Scientific and Technology Research, 8 (12). ISSN 2277-8616

J

J. M., Kafuku and Mat Saman, M. Z. and Yusof, S. (2019) Application of fuzzy logicin selection of remanufacturing technology. Procedia Manufacturing, 33 . pp. 192-199. ISSN 2351-9789

Jamil, M. M. and Che Sidik, N. A. and Umar, U. S. and Hamisu, M. T. and Sa’ad, A. (2019) Carbon nanotube for solar energy applications: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). ISSN 2289-7879

Jia, X. and Klemes, J. J. and Varbanov, P. S. and Wan Alwi, S. R. (2019) Blue water footprint of the Czech Republic. Chemical Engineering Transactions, 76 . pp. 1063-1068. ISSN 2283-9216

Jiran, N. S. and Saman, M. Z. M. and Yusof, N. M. (2019) Development of cost estimation model of the membrane system. International Journal of Engineering and Advanced Technology, 8 (5). pp. 645-653. ISSN 22498958

Jiran, N. S. and Zainol, Z. N. and Saman, M. Z. M. and Yusof, N. M. (2019) Cost assessment on the application of hollow fibre membrane module in wastewater treatment system in small scale textile industry. International Journal of Recent Technology and Engineering, 7 (6). pp. 1023-1031. ISSN 2277-3878

Jiran, N. S. and Zainol, Z. N. and Saman, M. Z. M. and Yusof, N. M. (2019) Cost assessment on the application of hollow fibre membrane module in wastewater treatment system in small scale textile industry. International Journal of Recent Technology and Engineering, 7 (6). pp. 1023-1031. ISSN 2277-3878

Jiran, Nur Syamimi and Gholami, Hamed and Mahmood, Salwa and Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin and Draskovic, Veselin and Jovovic, Radislav (2019) Application of activity-based costing in estimating the costs of manufacturing process. Transformations in Business and Economics, 18 (2). pp. 839-860. ISSN 1648-4460

Johar, M. and Chong, W. W. F. and Kang, H. S. and Wong, K. J. (2019) Effects of moisture absorption on the different modes of carbon/epoxy composites delamination. Polymer Degradation and Stability, 165 . pp. 117-125. ISSN 0141-3910

Johar, M. A. M. and Said, M. F. M. and Abas, M. A. and Latiff, Z. A. and Ali, M. F. and Ibrahim, N. M. I. N. (2019) Flow analysis of intake port geometry of spark ignition engine using simulation. In: 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018, 21-25 July 2018, Sri Manja Hotel Kuantan, Malaysia.

K

Koo, Hwai Yeng Koo and Mohd. Nasir, Mohd. Nazri and Mansor, Shuhaimi (2019) The analysis of lateral stability of tailless CAMAR-3 with winglets. Journal of Transport System Engineering, 6 (1). pp. 33-39. ISSN 2289–9790

Koloor, S. S. R. and Abdullah, M. A. and Tamin, M. N. and Ayatollahi, M. R. (2019) Fatigue damage of cohesive interfaces in fiber-reinforced polymer composite laminates. Composites Science and Technology, 183 . p. 107779. ISSN 0266-3538

Kamarudin, M. and Jamaluddin, M. J. and Tamin, M. N. (2019) Fatigue assessment of steel wire rope. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Kang, Hooi Siang and Md. Arif, Ummul Ghafir and Kim, Kyung Sung and Kim, Moo Hyun and Liu, Yu Jie and Lee, Kee Quen and Wu, Yun Ta (2019) Sloshing suppression by floating baffle. Ocean Systems Engineering, 9 (4). pp. 409-422. ISSN 2093-6702

Karimzadeh, A. and Koloor, S. S. R. and Ayatollahi, M. R. and Bushroa, A. R. and Yahya, M. Y. (2019) Assessment of nano-indentation method in mechanical characterization of heterogeneous nanocomposite materials using experimental and computational approaches. Scientific Reports, 9 (1). p. 15763. ISSN 2045-2322

Karimzadeh, Atefeh and Ayatollahi, Majid Reza and Koloor, Seyed Saeid Rahimian and Bushroa, Abd. Razak and Yahya, Mohd. Yazid and Tamin, Mohd. Nasir (2019) Assessment of compressive mechanical behavior of Bis-GMA polymer using hyperelastic models. Polymers, 11 (10). p. 1571. ISSN 2073-4360

Karkevand, M. Bahrami and Tabrizi, Nasiri and Wong, K. Y. and Kahrizsangi, R. Ebrahimi and Fallahpour, A. and Samandari, S. Saber and Baradaran, S. and Basirun, W. J. (2019) Mechanochemistry approach to produce in-situ tungsten borides and carbides nanopowders: experimental study and modeling. Materials Chemistry and Physics, 224 . pp. 47-64. ISSN 0254-0584

Kaulani, S. A. and Latiff, Z. A. and Perang, M. R. M. and Said, M. F. M and Hasan, M. F. (2019) Performance and emission of compression ignition (ci) engine using ethanol-diesel blending as a fuel. In: Proceedings Of The 3Rd International Conference On Automotive Innovation Green Energy Vehicle: Aigev 2018, 25–26 July 2018, Kuantan, Malaysia.

Kazeem, A. B. and Badarulzaman, N. A. and Wan Ali, W. F. F. (2019) Effect of isothermal heat treatment on hardness of x7475 alumoinium alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 233-239. ISSN 2289-7879

Khan, Sohaib Z. and Masood, S. H. and Ibrahim, Essam and Ahmad, Zaini (2019) Compressive behaviour of Neovius Triply Periodic Minimal Surface cellular structure manufactured by fused deposition modelling. Virtual and Physical Prototyping, 14 (4). pp. 360-370. ISSN 1745-2759

Khong, Wui Gan and You, Wei Ho and Zheng, Yang Ow and Israr, Haris Ahmad and Wong, King Jye (2019) Aligned discontinuous carbon fibre tows in hybrid composites and their tensile behaviour: an experimental study. Journal of Composite Materials, 53 (26-27). pp. 3893-3907. ISSN 0021-9983

Kianpour, E. and Che Sidik, N. A. (2019) A detailed study of row-trenched holes at the combustor exit on film-cooling effectiveness. Mechanics and Mechanical Engineering, 23 (1). ISSN 1428-1511

Kien, L. T. T. and Ma'aram, A. and Hassan, S. A. H. S. and Ngadiman, N. H. A. and Kadir, A. Z. A. (2019) A simulation-based model for determining safety inventory at a fixed-time period system. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 2775-2780. ISSN 2278-3075

Koloor, S. S. R. and Koloor, S. M. Rahimian and Karimzadeh, A. and Hamdi, M. (2019) Nano-level damage characterization of graphene/polymer cohesive interface under tensile separation. Polymers, 11 (9). p. 1435. ISSN 2073-4360

Kong, H. T. P. and Kassim, K. A. and Umar, M. and Zango, M. U. and Muhammed, A. S. and Ahmad, K. (2019) Microbially induced carbonate precipitations to improve residual soil at various temperatures. Bulletin of the Geological Society of Malaysia, 29 (67). pp. 87-93. ISSN 0126-6187

L

Lai, G. N. Y. and Wong, K. H. and Halim, D. and Lu, J. and Kang, H. S. (2019) Industry 4.0 enhanced lean manufacturing. In: 8th International Conference on Industrial Technology and Management, ICITM 2019, 2-4 March 2019, Cambridge, United Kingdom.

Latif, K, K and Kadir, A. Z. A. and Yusof, Y. (2019) The importance of STEP - NC in the IR 4.0 manufacturing systems. International Journal of Advanced Trends in Computer Science and Engineering, 8 (4). pp. 1568-1570. ISSN 2278-3091

Lee, Cheng Sheng and Wong, Kuan Yew (2019) Advances in intellectual capital performance measurement: a state-of-the-art review. Bottom Line, 32 (2). pp. 118-134. ISSN 0888-045X

Lee, J. H. and Latiff, Z. A. and Perang, M. R. M. and Said, M. F. M. (2019) Air flow distribution measurement of the vehicle cooling system test rig. In: 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018, 25-26 July 2018, Sri Manja Hotel Kuantan, Malaysia.

Leman, Z. A. and Mohammad Ariff, M. H. and Zamzuri, H. and Abdul Rahman, M. A. and Mazlan, S. A. (2019) Model predictive controller for path tracking and obstacle avoidance manoeuvre on autonomous vehicle. In: 12th Asian Control Conference, ASCC 2019, 9-12 June 2019, Kitakyusyu International Conference CenterKitakyushu-shi, Japan.

Liu, Qiong and Rezaei, Ahmad Reza and Wong, Kuan Yew and Azami, Mohammad Mahdi (2019) Integrated modeling and optimization of material flow and financial flow of supply chain network considering financial ratios. Numerical Algebra, Control and Optimization, 9 (2). pp. 113-132. ISSN 2155-3289

Low, K. O. and Teng, S. M. and Johar, M. and Israr, H. A. and Wong, K. J. (2019) Mode I delamination behaviour of carbon/epoxy composite at different displacement rates. Composites Part B: Engineering, 176 . p. 107293. ISSN 1359-8368

M

Mohsenizadeh, S. and Ahmad, Z. (2019) Auxeticity effect on crushing characteristics of auxetic foam-filled square tubes under axial loading. Thin-Walled Structures, 145 . p. 106379. ISSN 0263-8231

Maarof, A. F. and Hamdan, S. H. (2019) Frictional behaviour of trimethylolpropane (TMP) oleate at different regimes of lubrication. Journal of Mechanical Engineering, 8 (1). pp. 1-9. ISSN 1823- 5514

Madisa, I. M. and Taib, M. F. M. and Reza, N. A. (2019) Implementation of Karakuri Kaizen to improve productivity and ergonomics in wire rope industry. In: 9th International Conference on Industrial Engineering and Operations Management, IEOM 2019, 5-7 March 2019, JW Marriott Hotel Bangkok, Thailand.

Mahmood, Salwa and Hardan, Muhammad Nazreen and Samat, Muhammad Khairul and Jiran, Nur Syamimi and Shaari, Muhammad Farid (2019) Ergonomic posture assessment of butchers: a small enterprise study in Malaysia food industry. Jurnal Teknologi, 81 (6). pp. 89-102. ISSN 2180-3722

Mahyon, Nur Izwanne and Li, Tao and Martinez-Botas, Ricardo and Wu, Zhentao and Li, Kang (2019) A new hollow fibre catalytic converter design for sustainable automotive emissions control. Catalysis Communications, 120 . pp. 86-90. ISSN 1566-7367

Mansor, A. M. and Lim, J. S. and Ani, F. N. and Hashim, H. and Ho, W. S. (2019) Characteristics of cellulose, hemicellulose and lignin of md2 pineapple biomass. Chemical Engineering Transactions, 72 . pp. 79-84. ISSN 2283-9216

Mansor, M. A. and Ahmad, Z. and Abdullah, M. R. (2019) Experimental investigation on low velocity impact of a novel fibre metal laminate (fml) tube. International Journal of Mechanical & Mechatronics Engineering, 19 (1). pp. 160-169. ISSN 2227-2771

Mansor, Muzlifah and Abd. Kader, Ab. Saman and Jalal, Mohd. Rajali (2019) Risk assessment of marine accidents in Tanjung Pelepas Port limit due to reclamation of Tanjung Piai Maritime Industrial Park. Jurnal Mekanikal, 42 (Jun). pp. 1-13. ISSN 2289-3873

Mat Dzahir, Mohd. Azuwan and Yamamoto, Shinichiroh (2019) Dynamic modeling of McKibben muscle using empirical model and particle swarm optimization method. Applied Sciences (Switzerland), 9 (12). ISSN 2076-3417

Mazzoni, Stefano and Rajoo, Srithar and Romagnoli, Alessandro (2019) A boil-off gas utilization for improved performance of heavy duty gas turbines in combined cycle. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 233 (1). pp. 96-110. ISSN 0957-6509

Md. Isa, Kamariah and Osman, Kahar and Abdullah, Nik Rosli and Othman, Nor Fadzilah and Hamid, Mohd. Norhakem (2019) Gasifying agents type at lower temperature effect on bubbling fluidised bed gasification for low rank coal. Progress in Computational Fluid Dynamics, 19 (1). pp. 44-54. ISSN 1468-4349

Md. Saad, Amir Putra and Prakoso, Akbar Teguh and Sulong, M. A. and Basri, Hasan and Wahjuningrum, Dian Agustin and Syahrom, Ardiyansyah (2019) Impacts of dynamic degradation on the morphological and mechanical characterisation of porous magnesium scaffold. Biomechanics and Modeling in Mechanobiology, 18 (3). pp. 797-811. ISSN 1617-7959

Md. Salleh, M. F. and Gholami, A. and Wahid, M. A. (2019) Numerical evaluation of thermal hydraulic performance in fin-and-tube heat exchangers with various vortex generator geometries arranged in common-flow-down or common-flow-up. Journal of Heat Transfer, 141 (2). ISSN 0022-1481

Md. Salleh, Mohd. Fahmi and Mohammed, Hussein A. and A. Wahid, Mazlan (2019) Thermal and hydraulic characteristics of trapezoidal winglet across fin-and-tube heat exchanger (FTHE). Applied Thermal Engineering, 149 . pp. 1379-1393. ISSN 1359-4311

Mior Shahidin, Shazatul Akmaliah (2019) Characterisation of electroless deposition parameter of copper on silicon wafer for through silicon via application. Masters thesis, Universiti Teknologi Malaysia.

Mohamad, S. M. and Othman, N. and Sharif, I. and Md. Zain, M. Z. and Abu Bakar, A. R. (2019) Dynamic behaviour and characteristics of rubber blade car performance. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6437-6452. ISSN 2229-8649

Mohamed Kamar, Haslinda (2019) Enhancement of thermal comfort in a large space building. Alexandria Engineering Journal, 58 (1). pp. 49-65. ISSN 1110-0168

Mohammad Asyraf, Mohammad Asyraf and Anwar, Mahmood and Islam, Sumaiya and Debnath, Sujan and Wong, Jerren and Izman, S. (2019) Evolution of electrical behavior due to nanosilver concentration influence on nanosilver-doped poly-phenylene-sulfide polymer conductor. JOM, 71 (9). pp. 3293-3297. ISSN 1047-4838

Mohammed, F. and Hassan, A. and Selim, S. Z. (2019) Carbon market sensitive robust optimization model for closed loop supply chain network design under uncertainty. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16 July 2018 through 17 July 2018, Johor Bharu, Johor, Malaysia.

Mohd. Fuad, Muhammad Ariff Hanaffi and Hasan, Mohd. Faizal and Ani, Farid Nasir (2019) Microwave torrefaction for viable fuel production: a review on theory, affecting factors, potential and challenges. Fuel, 253 . pp. 512-526. ISSN 0016-2361

Mohd. Ghazali, M. K. and Shaharuddin, N. M. R. and Ali, A. and Kang, H. S. and Mohd. Nasir, M. N. and Ab. Talib, M. H. (2019) Surface roughness effect on vortec-induced vibration phenomenon in cross-flow direction of a bluff body. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2). pp. 253-263.

Mohd. Ghazali, Normah and Estelle, Patrice and Halelfadl, Salma and Mare, Thierry and Tng, Choon Siong and Abidin, Ummikalsom (2019) Thermal and hydrodynamic performance of a microchannel heat sink with carbon nanotube nanofluids: effect of concentration and channel section. Journal of Thermal Analysis and Calorimetry, 138 (2). pp. 937-945. ISSN 1388-6150

Mohd. Mustafa, Nur Nabilah and Abdul Kadir, Aini Zuhra and Zakaria, Khidzir (2019) Defect analysis of vacuum casting parts fabricated by fused deposition modelling technique. Journal of Multidisciplinary Approaches in Science (JMAS), 3 (1). pp. 46-53. ISSN 2652-144X

Mohd. Ramli, Nur Fatin Fatina and Mat Dzahir, Mohd. Azuwan and Yamamoto, Shin Ichiroh (2019) Estimation of transition frequency during continuous translation surface perturbation. Applied Sciences (Switzerland), 9 (22). ISSN 2076-3417

Mohd. Sofi, Muhammad Izzuddin (2019) Energy absorption capability of multi-cell thin-walled tube under lateral loading. Masters thesis, Universiti Teknologi Malaysia.

Mohd. Sofi, Muhammad Izzuddin and Ahmad, Zaini and Wong, King Jye (2019) Lateral crushing of single and multi-cell thin-walled circular tube under a quasi-static loading. Journal of Engineering Science and Technology, 14 (2). pp. 1019-1030. ISSN 1823-4690

Mohebbi, Mostafa (2019) Reactivity controlled compression ignition combustion in a light duty diesel engine using alternative fuels. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Mohsenizadeh, Saeid (2019) Crashworthiness performance of optimized auxetic foamfilled tubes under axial loadings. PhD thesis, Universiti Teknologi Malaysia.

Mohsenizadeh, Saeid and Ahmad, Zaini and Alipour, Roozbeh and A. Majid, Rohah and Prawoto, Yunan (2019) Quasi tri-axial method for the fabrication of optimized polyurethane auxetic foams. Physica Status Solidi (B) Basic Research, 256 (10). ISSN 0370-1972

Mokhtar, M. and Ali, W. F. F. W. and Djuansjah, J. R. P. (2019) Influence of silica content on the stabilization of tetragonal zirconia for biomedical applications. In: International Conference on X-Rays and Related Techniques in Research and Industry 2018, ICXRI 2018, 18-19 Aug 2018, Grand Riverview Hotel Kota Bharu, Kelantan, Malaysia.

Mong, G. R. and Ng, J. H. and Chong, W. W. F. and Ani, F. N. and Lam, S. S. and Chong, C. T. (2019) Kinetic study of horse manure through thermogravimetric analysis. Chemical Engineering Transactions, 72 . ISSN 2283-9216

Moradi, A. and Ngah, R. and Khalily, M. (2019) Polarized diversity compact planar mimo antenna for wireless access point applications. Progress In Electromagnetics Research C, 91 . ISSN 1937-8718

Moslemi, Navid and Zardian, Mohsen Gol and Ayob, Amran and Redzuan, Norizah and Rhee, Sehun (2019) Evaluation of sensitivity and calibration of the chaboche kinematic hardening model parameters for numerical ratcheting simulation. Applied Sciences (Switzerland)9, 9 (12). p. 578. ISSN 2076-3417

Muhammad, N. M. and Sidik, N. A. C. and Saat, A. and Abdullahi, B. (2019) Effect of nanofluids on heat transfer and pressure drop characteristics of diverging-converging minichannel heat sink. CFD Letters, 11 (4). pp. 105-120. ISSN 2180-1363

Muhammad Azmi, M. A. F. and Ma’Aram, A. and Kadir, A. Z. A. and Ngadiman, N. H. A. (2019) Risk factors of low back pain amongst port crane operator in Malaysia. International Journal of Innovative Technology and Exploring Engineering, 8 (7). pp. 1434-1439. ISSN 2278-3075

Musab, R. and As'arry, A. and Md. Rezali, K. A. and Abdul Jalil, N. A. and Raja Ahmad, R. M. K. and Md. Zain, M. Z. (2019) Tremor quantification and its measurements using shimmer. In: 1st Colloquium on Noise, Vibration and Comfort, CNVC 2019, 7 March 2019, Selangor, Malaysia.

Mustapa, M. A. and Yaakob, O. and Ahmed, Y. M. (2019) Numerical simulation of the breakwater-ramp design for multistage-overtopping wave energy breakwater hybrid device. International Journal of Innovative Technology and Exploring Engineering, 9 (1). ISSN 4902-4911

N

N., Afifah A. and S., Syahrullail and Wan Azlee, Nur Izyan and Che Sidik, Nor Azwadi and W. J., Yahya and Abd. Rahim, Erween (2019) Biolubricant production from palm stearin through enzymatic transesterification method. Biochemical Engineering Journal, 148 . pp. 178-184. ISSN 1369-703X

Nadila, N. I. and Lazim, T. M. and Mat, S. (2019) Verification of heat transfer enhancement in tube with spiral corrugation. In: 10th International Meeting of Advances in Thermofluids - Smart City: Advances in Thermofluid Technology in Tropical Urban Development, IMAT 2018, 16-18 Nov 2018, Grand Inna Hotel Kuta, Bali, Indonesia.

Nadzir, N. M. and Rahim, M. K. A. and Zubir, F. and Majid, H. A. (2019) Uhf meander bowtie antenna for RFID application. Indonesian Journal of Electrical Engineering and Informatics, 7 (2). pp. 295-302. ISSN 2089-3272

Nanda, I. P. and Hassim, M. H. and Idris, M. H. and Jahare, M. H. and Abdulmalik, S. S. and Arafat, A. (2019) Mechanical and degradation properties of zinc adopted magnesium alloys for biomedical application. In: 1st Conference on Innovation in Technology and Engineering Science, CITES 2018, 8-9 Nov 2018, Padang, Indonesia.

Nanda, I. P. and Hassim, M. H. and Idris, M. H. and Jahare, M. H. and Arafat, A. (2019) Effect of mechanical tumbling parameters on surface roughness and edge radius of medical grade cobalt chromium alloy. International Journal on Advanced Science, Engineering and Information Technology, 9 (1). pp. 314-320. ISSN 2088-5334

Nanda, I. P. and Idris, M. H. and Jahare, M. H. (2019) Effect of pouring temperatures on porosity and mechanical properties of gravity die casting magnesium alloy. In: 1st Conference on Innovation in Technology and Engineering Science, CITES 2018, 8-9 Nov 2018, Padang, Indonesia.

Nasir, Nazri and Lehmann, Fritz-Olaf and Schützner, Peter and Mat, Shabudin and Mohd., Nik Ahmad Ridhwan (2019) Dynamics of body kinematics of freely flying houseflies responding to air turbulence. Journal of Asia-Pacific Entomology, 22 (4). pp. 1082-1089. ISSN 12268615

Nasir, Nazri and Mat, Shabudin (2019) An automated visual tracking measurement for quantifying wing and body motion of free-flying houseflies. Measurement: Journal of the International Measurement Confederation, 143 . pp. 267-275. ISSN 0263-2241

Nassir, S. A. H. and Zawawi, F. M. and Mazlan, M. Z. and Samion, S. and Yazid, M. A. W. M. and Abidin, U. (2019) Numerical investigation of wake energy induced by cruising passenger vehicles on highway. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 175-185. ISSN 2289-7879

Ngadiman, N. H. A. and Mansur, R. and Sirat, R. M. and Taib, M. F. M. and Ma’aram, A. (2019) Safety and risk evaluation using hirarc model at palm oil mill. International Journal of Innovative Technology and Exploring Engineering, 8 (11). pp. 790-797. ISSN 2278-3075

Ngadiman, N. H. A. and Othman, M. H. D. (2019) A short review on membranes for helium separation and purifications. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). ISSN 2289-7879

Nik Mansor, Nik Hilmi Aiman and Mohd. Taib, Jamaludin and Dzakaria, Afandi and Abd. Jalil, Mohamad Kasim (2019) vehicle dynamic model–driver model system: platform to evaluate car and human responses using double lane change circuit. Jurnal Mekanikal, 42 (Jun). pp. 24-35. ISSN 2289-3873

Nikfarjam, M. and Koto, J. and Yaakob, O. and Seif, M. S. and Aref, A. (2019) Evaluation of water impact for symmetric wedge by experimental and numerical methods. International Journal of Applied Mechanics and Engineering, 24 (1). pp. 221-230. ISSN 1734-4492

Norazam, A. S. and Kamar, H. M. and Kamsah, N. and Alhamid, M. I. (2019) Simulation of adsorption process in a rotary solid desiccant wheel. In: 10th International Meeting of Advances in Thermofluids - Smart City: Advances in Thermofluid Technology in Tropical Urban Development, IMAT 2018, 16-17 Nov 2018, Grand Inna Hotel Kuta, Bali, Indonesia.

Noraziman, S. M. and Rahman, M. M. and Mohd. Faizal, H. and Saat, A. and Abdul Wahid, M. (2019) Renewable energy support policy in Malaysia: a comparative analysis with two successful countries. In: 1st GCC International Conference on Industrial Engineering and Operations Management, IEOM 2019, 26-28 Nov 2019, Riyadh, Saudi Arabia.

O

Opia, A. C. and Abdul Hamid, M. K. and Samion, S. (2019) Anti-oxidant property of eichhornia crassipes in oil samples. International Journal of Engineering and Advanced Technology, 8 (6). pp. 2404-2410. ISSN 2249-8958

Olohunde, S. T. and Mohamad Hafizi, A. R. and Jamaliah, I. and Ali Al-Bakoosh, A. and Segun, O. O. and Sadiq, I. O. (2019) Corrosion resistance of aluminium-silicon hypereutectic alloy from scrap metal. Journal of Bio- and Tribo-Corrosion, 5 (2). ISSN 2198-4220

Omar, N. M. H. and Tap, M. M. and Ma'aram, A. and Redzuan, N. (2019) An inventory model for a perishable and recoverable product. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16 - 17 July 2018, Johor Bahru, Johor, Malaysia.

Ooi, Ching Sheng and Lim, Meng Hee and Leong, Mohd. Salman (2019) Self-tune linear adaptive-genetic algorithm for feature selection. IEEE Access, 7 (NA). pp. 138211-138232. ISSN 2169-3536

P

Pek Eek, R. T. and Darus, I. Z. M. and Sahlan, S. and Ab. Talib, M. H. (2019) Optimized modeling of flexible beam structure with pole-zero estimation. International Review of Mechanical Engineering, 13 (3). pp. 148-161. ISSN 1970-8734

Prawoto, Y. and Mazein, P. G. and Kosterin, A. V. and Ahmad, Z (2019) Effect of shot size in surface improvement via shot peening; analytical, modeling and experimental approaches. International Journal of Metallurgy and Metal Physics, 4 (1). pp. 1-16. ISSN 2631-5076

Q

Quanjin, M. A. and M. Sahat, Idris and Mat Rejab, Mohd. R. and Abu Hassan, Shukur and Zhang, Bo and Merzuki, Mubin N. M. (2019) The energy-absorbing characteristics of filament wound hybrid carbon fiber-reinforced plastic/polylactic acid tubes with different infill pattern structures. Journal of Reinforced Plastics and Composites, 38 (23-24). pp. 1067-1088. ISSN 0731-6844

R

Rad, M. Shokri and Hatami, H. and Ahmad, Z. and Yasuri, A. Karimdoost (2019) Analytical solution and finite element approach to the dense re-entrant unit cells of auxetic structures. Acta Mechanica, 230 (6). pp. 2171-2185. ISSN 0001-5970

Radhwan, H. and Sharif, S. and Abd. Rahim, S. Z. and Suhaimi, M. A. and Mohd. Khushairi, M. T. (2019) Testing of material properties on metal epoxy composite (mec): a review. In: 5TH International Conference on Green Design and Manufacture (IConGDM 2019), 29–30 April 2019, Jawa Barat, Indonesia.

Radhwan, H. and Sharif, S. and Shayfull, Z. and Suhaimi, M. A. and Khushairi, M. T. M. and Fathullah, K. (2019) Experimental study mechanical behaviour of epoxy resin composites filled with aluminium particles. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 Apr 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Radhwan, H. and Sharif, S. and Shayfull, Z. and Suhaimi, M. A. and Khushairi, M. T. M. and Najmi, M. R. M. (2019) Optimization of cutting parameters for surface roughness in ball end milling of aluminium epoxy using Taguchi method. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 Apr 2019, Jawa Barat, Indonesia.

Rahman, I. A. and Mohamad, N. and Rohani, J. M. and Zein, R. M. (2019) The impact of work rest scheduling for prolonged standing activity. Industrial Health, 56 (6). ISSN 0019-8366

Rahman, M. M. and Faizal, H. M. and Saat, A. and Wahid, M. A. (2019) Higher initial costs for renewables electricity : emission , water and job-creation benefits offset the higher costs. In: 9th International Conference on Industrial Engineering and Operations Management, IEOM 2019, 5-7 March 2019, JW Marriott Hotel Bangkok, Thailand.

Rajendran, T. S. and Johar, M. and Low, K. O. and Abu Hassan, S. and Wong, K. J. (2019) Interlaminar fracture toughness of a plain weave flax/epoxy composite. Plastics, Rubber and Composites, 48 (2). pp. 74-81. ISSN 1465-8011

Ramalingam, Santhoshinii and Mat, Shabudin and Kasim, Khushairi Amri and Said, Mazuriah and Mohd. Nasir, Mohd. Nazri and Nik Mohd., Nik Ahmad Ridhwan and Mansor, Shuhaimi and Mohamed Radzi, Nor Haizan and Perumal, Kannan (2019) Influences of propeller advance ratio on delta-winged uav model vortex properties. Journal of Aeronautics, Astronautics and Aviation, 51 (2). pp. 183-200. ISSN 1990-7710

Ramli, A. S. and Sharif, S. and Said, A. Y. M. and Karim, Z. (2019) Step over (ae) effect on cutting parameters when trochoidal pocket milling of titanium alloy ti-6al-4va. Page 1 International Journal of Engineering and Advanced Technology (IJEAT), 8 (6). ISSN 2249–8958

Ramli, A. S. and Sharif, S. and Said, A. Y. M. and Yusop, M. S. M. and Karim, Z. and Mohruni, A. S. (2019) Investigation of tool entry strategy when pocket milling titanium alloy, ti-6al-4v under wet condition. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 April 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Rangappa, Ravichandra and Rajoo, Srithar (2019) Effect of thermo-physical properties of cooling mass on hybrid cooling for lithium-ion battery pack using design of experiments. International Journal of Energy and Environmental Engineering, 10 (1). pp. 67-83. ISSN 2008-9163

Rashid, Z. and Bakar, N. A. and Dolah, R. and Ghazilla, R. A. R. (2019) Comparison study of malaysian driver seating position in saej1517 accommodation model. SAE International Journal of Passenger Cars - Mechanical Systems, 12 (2). ISSN 1946-3995

Razzaq, Alaa Mohammed and Majid, Dayang Laila and Ishak, Mohamad R. and Basheer, Uday M. (2019) Influence of fly ash on the microstructure and mechanical properties AA6063 alloy using compocasting technique. Materials Express, 9 (1). pp. 1-14. ISSN 2158-5849

Renani, Nafiseh Ghorbani and Helmi, Syed Ahmad and Hisjam, Muhammad and Jeddi, Alireza Rangraz (2019) Analytic hierarchy process (AHP) model for optimum distribution network selection in food industries. In: 4th International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2018, 9 October 2018 through 11 October 2018, Alana Hotel and Convention CenterSurakarta, Indonesia.

Roslan, M. N. and Yahya, M. Y. and Ahmad, Z. and Rashid, A. H. A. (2019) Axial impact crushing behaviour of thin-walled braided composite tubes: experimental comparison on basalt fibre and glass fibre reinforcement. In: 8th International Conference on Mechanical and Manufacturing Engineering, ICME 2018, 16-17 July 2018, Johor Bahru, Johor.

Rozali, N. E. M. and Cheong, J. S. and Alwi, S. R. W. and Ho, W. S. and Manan, Z. A. and Klemes, J. J. (2019) Integration of diesel plant into hybrid power system using numerical probabilistic approach. Chemical Engineering Transactions, 72 . pp. 277-282. ISSN 2283-9216

S

Sukiman, N. A. and Ghandvar, H. and Abubakar, T. A. and Ci, W. Y. (2019) Microstructure characterization and tensile properties of al-15mg2si-xysz hybrid composite. Malaysian Journal of Microscopy, 15 (1). pp. 30-37. ISSN 1823-7010

Sadiq, T. O. and Hameed, B. A. and Idris, J. and Olaoye, O. and Nursyaza, S. and Samsudin, Z. H. and Hasnan, M. I. (2019) Effect of different machining parameters on the surface roughness of aluminium alloys based on Si and Mg content. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (10). ISSN 1678-5878

Salleh, Z. A. M. and Samion, S. and Dandan, M. A. (2019) Custom cylinder liner-piston ring combination on pin-on- disc for lubricant characteristic study. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 . pp. 212-219. ISSN 2289-7879

Samiran, Nor Afzanizam and Chong, Cheng Tung and Ng, Jo Han and Tran, Manh Vu and Ong, Hwai Chyuan and Agustin, Valera Medina and Chong, William Woei Fong and Mohd. Jaafar, Mohammad Nazri (2019) Experimental and numerical studies on the premixed syngas swirl flames in a model combustor. International Journal of Hydrogen Energy, 44 (44). pp. 24126-24139. ISSN 03603199

Saputri, Virda Hersy Lutviana and Sutopo, Wahyudi and Hisjam, Muhammad and Ma'aram, Azanizawati (2019) Sustainable agri-food supply chain performance model measurement for GMO and Non-GMO using data envelopment analysis method. Applied Sciences (Switzerland), 9 (6). ISSN 2076-3417

Saufi, Syahril Ramadhan and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee (2019) Challenges and opportunities of deep learning models for machinery fault detection and diagnosis: a review. IEEE Access, 7 . pp. 122644-122662. ISSN 2169-3536

Saufi, Syahril Ramadhan and Ahmad, Zair Asrar and Leong, Mohd. Salman and Lim, Meng Hee (2019) Low-speed bearing fault diagnosis based on ArSSAE model using acoustic emission and vibration signals. IEEE Access, 7 . pp. 46885-46897. ISSN 2169-3536

See, Phen Chiak and Fosso, Olav Bjarte and Wong, Kuan Yew and Molinas, Marta (2019) An approach for establishing a common grid model for flow-based market mechanism simulations. CSEE Journal of Power and Energy Systems, 5 (3). pp. 374-381. ISSN 2096-0042

Selamat, U. and Osman, K. and Rahim, A. A. (2019) Heat and flow analysis of a chilled water storage system using computational fluid dynamics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (1). pp. 131-140. ISSN 2289-7879

Selamat, Ubaidullah (2019) Development of air pollutants dispersion algorithm in urban industrial park for air pollution simulation. PhD thesis, Universiti Teknologi Malaysia.

Shaedi, S. A. and Mohd. Ghazali, N. and Oh, J. T. and Ahmad, R. and Mohd. Yunos, Y. (2019) Entropy generation minimization of two-phase flow in a mini channel with genetic algorithm. Evergreen, 6 (1). pp. 39-43. ISSN 2189-0420

Shahriman, A. S. and Mad Saad, S. and Ahmad, Z. A. and Hussein, M. and Mat Dzahir, M. A. and Mat Dzahir, M. A. and Mat Dzahir, M. A. (2019) An architecture improvement of electronic braille quran based on raspberry pi. International Journal of Innovative Technology and Exploring Engineering, 8 (11). pp. 395-399. ISSN 2278-3075

Sharif, S. and Ramli, A. S. and Said, A. Y. M. and Karim, Z. and Rahim, E. A. and Sani, A. S. A. (2019) Effect of cutting parameters on tool wear when trochoidal pocket milling ti6al4v. International Journal of Integrated Engineering, 11 (4). pp. 159-165. ISSN 222838X

Sholichin, F. and Isa, M. A. and Halim, S. A. and Harun, M. F. (2019) Review of iOS architectural pattern for testability, modifiability, and performance quality. Journal of Theoretical and Applied Information Technology, 97 (15). pp. 4021-4035. ISSN 1992-8645

Syed Ahmad Helmi, Syed Ahmad Helmi and Alias, Arman and Muhammad Hisjam, Muhammad Hisjam (2019) Improved design solution for motion resistance problem through integration of robust design and theory of inventive problem solving (TRIZ) principle. In: 4th International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2018, 9 - 11 October 2018, Surakarta, Indonesia.

Syed Ahmad Helmi, Syed Ahmad Helmi and Mohd. Yusof, Khairiyah and Muhammad Hisjam, Muhammad Hisjam (2019) Enhancing the implementation of science, technology, engineering and mathematics (STEM) education in the 21st century: A simple and systematic guide. In: 4th International Conference on Industrial, Mechanical, Electrical, and Chemical Engineering, ICIMECE 2018, 9 - 11 October 2018, Surakarta, Indonesia.

T

Takeyeldein, M. M. and Lazim, T. M. and Nik Mohd., N. A. R. and Ishak, I. S. and Ali, E. A. (2019) Wind turbine design using thin airfoil sd2030. Evergreen, 6 (2). ISSN 2189-0420

Tamin, M. N. and Abdullah, S. (2019) Deformation and damage mechanisms of material and structures. International Journal of Structural Integrity, 10 (5). ISSN 1757-9864

Tan, K. H. and Nor, N. S. M. and Md. Zain, M. Z. (2019) Development and control of biped walking robot using PI control. In: 10th National Technical Seminar on Underwater System Technology, NUSYS 2018, 26-27 Sep 2018, Pahang, Malaysia.

Tang, Mei Shick and Abdul Kadir, Aini Zuhra and Nor Hasrul AkhmalNgadiman, Nor Hasrul AkhmalNgadiman and AzanizawatiMa’aram, AzanizawatiMa’aram (2019) A review of biomaterials scaffold fabrication in additive manufacturing for tissue engineering. Journal of Bioactive and Compatible Polymers, 34 (6). pp. 415-435. ISSN 0883-9115

Tee, J. W. and Hamdan, S. H. and Chong, W. W. F. (2019) Predictive tool for frictional performance of piston ring-pack/liner conjunction. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5513-5527. ISSN 2289-4659

Teo, A. E. and Chiong, M. S. and Yang, M. and Romagnoli, A. and Martinez-Botas, R. F. and Rajoo, S. (2019) Performance evaluation of low-pressure turbine, turbo-compounding and air-Brayton cycle as engine waste heat recovery method. Energy, 166 . pp. 895-907. ISSN 0360-5442

V

Vaea, M. A. and Abidin, U. and Kamaruzaman, N. and Zawawi, F. M. and Yazid, M. N. A. W. M. (2019) Numerical investigation of drag force on micro-sized magnetic beads in microchannel with chamber design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 57 (2). pp. 186-201. ISSN 2289-7879

Veza, I. and Said, M. F. M. and Latiff, Z. A. and Hasan, M. F. and Jalal, R. and Ibrahim, N. M. I. N. (2019) Simulation of predictive kinetic combustion of single cylinder hcci engine. In: 3rd International Conference on Automotive Innovation Green Energy Vehicle, AiGEV 2018, 25-26 July 2018, Sri Manja Hotel Kuantan, Malaysia.

Veza, Ibham and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkarnain (2019) Progress of acetone-butanol-ethanol (ABE) as biofuel in gasoline and diesel engine: A review. Fuel Processing Technology, 196 . p. 106179. ISSN 0378-3820

W

Wong, K. Y. and Kamar, H. M. and Kamsah, N. (2019) Enhancement of airborne particles removal in a hospital operating room. International Journal of Automotive and Mechanical Engineering, 16 (4). ISSN 2229-8649

Wahid, M. A. and Barzegaravval, H. and Ghazali, A. D. and Kasani, A. and Mazlan, M. A. and Saat, A. and Yasin, M. (2019) Fuel composition influences on exergetic performance of a standalone internal reforming solid oxide fuel cell. In: 10th International Meeting of Advances in Thermofluids - Smart City: Advances in Thermofluid Technology in Tropical Urban Development, IMAT 2018, 16-17 Nov 2018, Grand Inna Hotel Kuta, Bali, Indonesia.

Waziralilah, N. F. and Abu, A. and Lim, M. H. and Quen, L. K. and Elfakharany, A. (2019) Bearing fault diagnosis employing gabor and augmented architecture of convolutional neural network. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5689-5702. ISSN 2289-4659

Wong, Keng Yinn (2019) Medical staff's movement effects on particle counts in a surgical zone. PhD thesis, Universiti Teknologi Malaysia.

Y

Yanis, Muhammad and Mohruni, Amrifan Saladin and Sharif, Safian and Yani, Irsyadi (2019) Optimum performance of green machining on thin walled Ti6AL4V using RSM and ANN in terms of cutting force and surface roughness. Jurnal Teknologi, 81 (6). pp. 51-60. ISSN 2180-3722

Yanis, M. and Mohruni, A. S. and Sharif, S. and Yani, I. (2019) Optimization of surface roughness using RSM and ann modelling on thin-walled machiningunder biodegradable cutting fluids. ARPN Journal of Engineering and Applied Sciences, 14 (18). pp. 3124-3134. ISSN 1819-6608

Yinn, W. K. and Kamar, H. M. and Kamsah, N. (2019) Effects of surgical staff turning motion on airflow distribution inside a hospital operating room. Evergreen, 6 (1). pp. 52-58. ISSN 2189-0420

Yanis, M. and Mohruni, A. S. and Sharif, S. and Yani, I. and Arifin, A. and Khona'ah, B. (2019) Application of RSM and ANN in predicting surface roughness for side milling process under environmentally friendly cutting fluid. In: 1st Symposium of Emerging Nuclear Technology and Engineering Novelty, SENTEN 2018, 4 - 5 July 2018, Palembang, South Sumatra, Indonesia.

Yanis, M. and Mohruni, A. S. and Sharif, S. and Yani, I. and Suzen, Z. and Ahmad, Z. A. (2019) Cutting force prediction when green machining of thin-walled ti-6al-4v under dry and mql-cutting using response surface methodology and artificial neural networks-algorithm. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 April 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Yazid, W. N. A. W. M. and Sharif, A. B. and Sidik, N. A. C. and Hanipah, M. H. and Zawawi, F. M. and Abidin, U. (2019) Effects of staggered array of cubical obstacles on near-ground wind environment and air quality. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (2). ISSN 2289-7879

Yong, C. C. and Rahman, M. M. and Faizal, H. M. and Saat, A. and Wahid, M. A. (2019) Techno-economic evaluation of hybrid power system in rural area of Sarawak, Malaysia. In: Proceedings of the International Conference on Industrial Engineering and Operations Management, 23-25 Oct 2019, Toronto, Canada.

Yong, K. W. and Ganesan, P. B. and Kazi, S. N. and Ramesh, S. and Sandaran, S. C. (2019) Computational modelling of droplet dynamics behaviour in polymer electrolyte membrane fuel cells: A review. Journal of Electrochemical Science and Technology, 10 (4). pp. 345-360. ISSN 2093-8551

Yusoff @ Adnan, Asmadib and Rahim, Muhammad Roslan and Mohd. Jaafar, Mohammad Nazri and Othman, Norazila and Mohd. Ismail, Mohd. Shuisma and Arifin, Kamal and Hasan, Mohd Faizal (2019) Combustion performance of syngas from palm kernel shell in a gas burner. Jurnal Teknologi, 81 (6). pp. 187-193. ISSN 2180-3722

Z

Zolpakar, N. A. and Mohd. Ghazali, N. (2019) Comparison of a thermoacoustic refrigerator stack performance: Mylar spiral, celcor substrates and 3D printed stacks. International Journal of Air-Conditioning and Refrigeration, 27 (3). p. 1950021. ISSN 2010-1325

Zaharuddin, M. F. A. and Yunos, P. A. A. and Jiyoung, Y. and Mohruni, A. S. and Yani, I. and Yanis, M. (2019) Machinability analysis of drilled bamboo fibre reinforced polymer (BFRP) composite. In: 1st Symposium of Emerging Nuclear Technology and Engineering Novelty, SENTEN 2018, 4 July 2018 through 5 July 2018, Horison Ultima Hotel Palembang, South Sumatra.

Zainol, Z. N. and Tap, M. M. and Kamar, H. M. and Kamsah, N. (2019) Heat transfer model for firefighters' burn injury. Indian Journal of Public Health Research and Development, 10 (6). ISSN 0976-0245

Zainol, Z. N. and Tap, M. M. and Kamar, H. M. and Kamsah, N. (2019) Heat transfer model to predict human skin temperature under comfort levels by using bioheat equation. International journal of online and biomedical engineering, 15 (10). pp. 52-64. ISSN 2626-8493

Zakaria, M. F. and Suhaimi, M. A. and Sharif, S. and Yang, G. D. and Shaharum, M. S. and Kamal, M. K. M and Zakaria, K. (2019) The application of cold air and nano-mql as cooling strategy in high speed milling of titanium alloy ti-6al-4v: a review. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 April 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Zaki, Nurul Zubaidah and Mazaha, Fareed A. and Abdul Latif, Ainullotfi and Mansor, Shuhaimi and Ab. Wahid, Mastura and Dahalan, Nizam and Othman, Norazila and Mat, Shabudin and Mohd. Nasir, Mohd. Nazri (2019) Effect of skin and spar laminate orientations on flutter of composite uav wing. Journal of Aeronautics, Astronautics and Aviation, 51 (2). pp. 201-212. ISSN 1990-7710

Zaman, H. A. and Sharif, S. and Idris, M. H. and Mohruni, A. S. and Ndaruhadi, P. Y. M. W. and Wong, C. K. E. (2019) High speed end milling of cobalt chromium molybdenum alloy using solid carbide tool under mql condition. In: 5th International Conference on Green Design and Manufacture 2019, IConGDM 2019, 29-30 Apr 2019, Aston Tropicana Hotel Kota Bandung, Jawa Barat, Indonesia.

Zaman, Munawar and Hassan, Adnan (2019) Improved statistical features-based control chart patterns recognition using ANFIS with fuzzy clustering. Neural Computing and Applications, 31 (10). pp. 5935-5949. ISSN 0941-0643

Zulhanafi, P. and Syahrullail, S. (2019) The tribological performances of Super Olein as fluid lubricant using four-ball tribotester. Tribology International, 130 . pp. 85-93. ISSN 0301-679X

Zulhanafi, P. and Syahrullail, S. (2019) The tribological performances of Super Olein as fluid lubricant using four-ball tribotester. Tribology International, 130 . pp. 85-93. ISSN 0301-679X