Items where Division is "Chemical Engineering" and Year is 2010

Article

Ab Muis, Zarina and Hashim, Haslenda and Abd Manan, Zainuddin and Mohd. Taha, Faridah (2010) Optimization of biomass usage for electricity generation with carbon dioxide reduction in Malaysia. Journal of Applied Sciences, 10 (21). 2613 -2617. ISSN 1812-5654

Ab. Muis, Zarina and Hashim, Haslenda and Abd Manan, Zainuddin and F. M., Taha and P. L., Douglas (2010) Optimal planning of renewable energy-integrated electricity generation schemes with CO2 reduction target. Renewable Energy, 35 (11). 2562 - 2570. ISSN 0960-1481

Abd Manan, Zainuddin and Moradia, Ali and Ghadera, Sattar and Shadravan, Vahid (2010) Kinetics investigation of direct natural gas conversion by oxidative coupling of methane. Journal of Natural Gas Science and Engineering, 2 (5). pp. 270-274. ISSN 1875-5100

Abd. Manan, Zainuddin and Che Yunus, Mohd. Azizi and A. N., Mustapa and W. B., Setianto and A. K., Mohd. Omar (2010) Extraction of ß-carotenes from palm oil mesocarp using sub-critical R134a. Food Chemistry, 125 (1). 262–267. ISSN 0308-8146

Abd. Manan, Zainuddin and Wan Alwi, Sharifah Rafidah and Hashim, Haslenda and Lim, Jeng Shiun and Kannan, K. S. and Mokhtar, Norhasliza and Ismail, Ahmad Zairin (2010) Energy efficiency award system in Malaysia for energy sustainability. Renewable and Sustainable Energy Reviews, 14 (8). pp. 2279-2289. ISSN 1364-0321

Abu Bakar, Aznizam and Hassan, Azman and Mohd. Yusof, Ahmad Fuad (2010) Mechanical properties of silane and zirconate coupling agent-treated oil palm empty fruit bunch fiber-filled acrylic-impact modified poly (vinyl chloride) composites. Polymer-Plastics Technology and Engineering, 49 (15). 1563 - 1570. ISSN 0360-2559

Abu Bakar, Aznizam and Tham, Boon Keat and Hassan, Azman (2010) Tensile properties of a poly(vinyl chloride) composite filled with poly(methyl methacrylate) grafted to oil palm empty fruit bunches. Journal of Applied Polymer Science, 115 (1). 91 -98. ISSN 1097-4628

Ahmad, Arshad and Sadighi, Sepehr and Irandoukht, Akbar (2010) Modeling a pilot fixed-bed hydrocracking reactor via a kinetic base and neuro-fuzzy method. Journal Of Chemical Engineering Of Japan, 43 (2). 174 - 185. ISSN 0021-9592

Ahmed, Iqbal and Kormin, Faridah and Idris, Ani and Mohd. Yunus, Rosli and Hassan, Zulkafli and Prasad, Reddy (2010) Preparation of PES ultrafiltration membrane using novel modified microwave casting solution technique. Journal of Applied Sciences, 10 (21). 2733 -2736. ISSN 1812-5654

Ajlia, S. A. S. H. and Abd. Majid, Fadzilah Adibah and Suvik, A. and Effendy, M. A. W. and Serati Nouri, H. (2010) Efficacy of papain-based wound cleanser in promoting wound regeneration. Pakistan Journal of Biological Sciences, 13 (12). 596 -603. ISSN 1028-8880

Ali, Mohd. Wijayanuddin and Mohamad, M. and Ahmad, A. (2010) Modelling for extraction of major phytochemical components from eurycoma longifolia. Journal of Applied Sciences, 10 (21). 2572 - 2577. ISSN 1812-5654

Arsad, Agus and Rahmat, Abdul Razak and Hassan, Azman and Iskandar, Shaipul Nizam (2010) Mechanical and rheological properties of PA6/ABS blends - with and without short glass fiber. Journal of Reinforced Plastics and Composites, 29 (18). 2808 - 2820. ISSN 0731-6844

Bakeri, Gh H. and Ismail, Ahmad Fauzi and Shariaty-Niassar, Mojtaba and Matsuura, Takeshi (2010) Effect of polymer concentration on the structure and performance of polyetherimide hollow fiber membranes. Journal of Membrane Science, 363 (1 - 2). 103 - 111. ISSN 0376-7388

Bazmi, Aqeel and Zahedi, Gholamreza and Hashim, Haslenda (2010) Progress and challenges in utilization of palm oil biomass as fuel for decentralized electricity generation. Renewable and Sustainable Energy Reviews, 15 (1). 574 -583. ISSN 1364-0321

Chan, Mieow Kee and Idris, Ani (2010) Permeability performance of different molecular weight cellulose acetate hemodialysis membrane. Separation and Purification Technology, 75 (2). pp. 102-113. ISSN 1383-5866

E. A., El-Hefian and El Sayed Nasef, Mohamed Mahmoud and A. H., Yahaya (2010) Preparation and characterization of chitosan/polyvinyl alcohol blends-a rheological study. E-Journal of Chemistry, 7 . S349 - S357. ISSN 0973-4945

El Sayed Nasef, Mohamed Mahmoud and Saidi, Hamdani and Mohd. Dahlan, Khairulzaman (2010) Radiation grafted poly(vinylidene fluoride)-graftpolystyrene sulfonic acid membranes for fuel cells: Structure-property relationships. Chinese Journal of Polymer Science (English Edition), 28 (5). 761 -770. ISSN 0256-7679

El Sayed Nasef, Mohamed Mahmoud and Hamdani, Saidi and Mohd. Dahlan, Khairul Zaman (2010) Kinetic investigations of graft copolymerization of sodium styrene sulfonate onto electron beam irradiated poly(vinylidene fluoride) films. Radiation Physics and Chemistry, 80 (1). pp. 66-75. ISSN 0969-806X

El-hefian, Esam A. and Nasef, Mohamed Mahmoud and Yahaya, Abdul Hamid (2010) Rheological and morphological studies of chitosan/agar/ poly (vinyl alcohol) blends. Journal of Applied Sciences Research, 6 (5). 460 -468. ISSN 1816-157X

Furuyado, Mami and Ahmad Zaini, Muhammad Abbas and Aikawa, Masami and Amano, Yoshimasa and Machida, Motoi (2010) Adsorption of Cd(II) on activated carbon fiber prepared from polyacrylonitrile (PAN). Journal of Environmental Chemistry, 20 (4). pp. 379-384. ISSN 1869-1099

Gholamreza, Zahedi Mohammad and Shirvany, Yazdan and M., Bashiri (2010) Estimation of sour natural gas water content. Journal of Petroleum Science and Engineering, 73 (001-00). pp. 156-160. ISSN 0920-4105

Hashemifard, Seyed Abdollatif and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2010) A new theoretical gas permeability model using resistance modeling for mixed matrix membrane systems. Journal of Membrane Science, 350 (1-2). 259 - 268. ISSN 03767388

Hassim, Mimi Haryani and Hurme, Markku (2010) Inherent occupational health assessment during basic engineering stage. Journal Of Loss Prevention In The Process Industries, 23 (2). pp. 260-268. ISSN 0950-4230

Hassim, Mimi Haryani and Hurme, Markku (2010) Inherent occupational health assessment during process research and development stage. Journal Of Loss Prevention In The Process Industries, 23 (1). pp. 127-138. ISSN 0950-4230

Hassim, Mimi Haryani and Hurme, Markku (2010) Occupational chemical exposure and risk estimation in process development and design. Process Safety and Environmental Protection, 88 (4). 225 - 235. ISSN 0957-5820

Hassim, Mimi Haryani and Perez, A. L. and Hurme, M. (2010) Estimation of chemical concentration due to fugitive emissions during chemical process design. Process Safety and Environmental Protection, 88 (3). 173 - 184. ISSN 0957-5820

Hatami, Tahmasb and Meireles, Maria Angela Almeida and Zahedi, Gholamreza (2010) Mathematical modeling and genetic algorithm optimization of clove oil extraction with supercritical carbon dioxide. Journal of Supercritical Fluids, 51 (3). 331 - 338. ISSN 0896-8446

Idris, Ani and I., Ahmed and M. A., Limin (2010) Influence of lithium chloride, lithium bromide and lithium fluoride additives on performance of polyethersulfone membranes and its application in the treatment of palm oil mill effluent. Desalination, 250 (2). 805 - 809. ISSN 0011-9164

K. S. N, Kamarudin and Y. Y., Chieng and H., Hamdan and H., Mat (2010) Methane adsorption characteristics of copper oxide modified NaY zeolite adsorbents. ASM Science Journal, 4 (1). pp. 29-40. ISSN 1823-6782

Khoa, T. D. and Shuhaimi, M. and Hashim, Haslenda and Panjeshahi, M. H. (2010) Optimal design of distillation column using three dimensional exergy analysis curves. Energy, 35 (12). 5309 -5319. ISSN 0360-5442

Kian Kai, Cheng and Benson, G. Martin and C. Grimsditch, David and G. Reid, David and C. Connor, Susan and L. Griffin, Julian (2010) Metabolomic study of the LDL receptor null mouse fed a high-fat diet reveals profound perturbations in choline metabolism that are shared with ApoE null mice. Physiological Genomics, 41 (3). 224 - 231. ISSN 1094-8341

Lee, Tin Sin and Rahmat, Abdul Razak and Wan Abdul Rahman, Wan Aizan and Zhao, Yan Sun and Abd Samad, Adlina (2010) Rheology and thermal transition state of polyvinyl alcohol-cassava starch blends. Carbohydrate Polymers, 81 (3). 737 -739. ISSN 0144-8617

Lee, Tin Sin and Wan Abd. Rahman, Wan Aizan and Rahmat, A. R. and Mokhtar, Munirah (2010) Determination of thermal stability and activation energy of polyvinyl alcohol-cassava starch blends. Carbohydrate Polymers, 83 (1). 303 - 305. ISSN 0144-8617

Low, Kheng Oon and Mahadi, Nor Muhammad and Abdul Rahim, Raha and Rabu, Amir and Abu Bakar, Farah Diba and Abdul Murad, Abdul Munir and Md. Illias, Rosli (2010) Enhanced secretory production of hemolysin-mediated cyclodextrin glucanotransferase in Escherichia coli by random mutagenesis of the ABC transporter system. Journal of Biotechnology, 150 (4). 453 - 459. ISSN 0168-1656

Mansourizadeh, Amir and Ismail, Ahmad Fauzi (2010) Effect of LiCl concentration in the polymer dope on the structure and performance of hydrophobic PVDF hollow fiber membranes for CO2 absorption. Chemical Engineering Journal, 165 (3). 980 - 988. ISSN 1385-8947

Mansourizadeh, Amir and Ismail, Ahmad Fauzi and Matsuura, Takeshi (2010) Effect of operating conditions on the physical and chemical CO2 absorption through the PVDF hollow fiber membrane contactor. Journal of Membrane Science, 353 (1 - 2). 192 - 200. ISSN 0376-7388

Muhamad, Ida Idayu and Lim, Shu Fen and Ng, Hui Hui and Mustapha, Noor Anis (2010) Genipin-cross-linked kappa-carrageenan/carboxymethyl cellulose beads and effects on beta-carotene release. Carbohydrate Polymers, 83 (3). pp. 1207-1212. ISSN 0144-8617

Nasef, Mohamed Mahmoud and Sugiarmawan, Indriani Andromeda (2010) Radiation induced emulsion grafting of glycidyl methacrylate onto high density polyethylene: a kinetic study. Journal of Fundamental Sciences, 6 (2). pp. 93-97. ISSN 1823-626X

Ngadi, Norzita and Abrahamson, John and Fee, Conan and Morison, Ken (2010) QCM-D study of ß-casein on silicate-PEG surfaces. Journal of Applied Sciences, 10 (24). 3343 -3348. ISSN 1812-5654

Rahmat, Abdul Razak and Hassan, Azman and Ahmad, Mazatusziha (2010) Mechanical properties of unplasticised PVC (PVC-U) containing rice husk and an impact modifier. Polymers & Polymer Composites, 18 (9). 527 - 536. ISSN 0967-3911

Rashid, Roslina and Esivan, S. M. M. and Radzali, S. R. and Idris, Ani (2010) Software sensor for measuring lactic acid concentration: Effect of input number and node number. Journal of Applied Sciences, 10 (21). 2578 -2583. ISSN 1812-5654

Saidina Amin, Nor Aishah and Akhtar, Javaid and Soo, Kim Kuang (2010) Liquefaction of empty palm fruit bunch (EPFB) in alkaline hot compressed water. Renewable Energy, 35 (6). 1220 - 1227. ISSN 0960-1481

Saidina Amin, Nor Aishah and N., Ya'aini and M., Misson and R., Haron and M., Mohamed (2010) Enyzmed pretreated empty palm fruit bunch for biofuel production. Journal of Applied Sciences, 10 (12). 1181 - 1186. ISSN 1812-5654

Sarmidi, Mohamad Roji and Choi, Hyun-kyung and Kim, Dong-hyun and Kim, Jin Wook and Ngadiran, Sulaiman and Seo Park, Chang (2010) Labisia pumila extract protects skin cells from photoaging caused by UVB irradiation. Journal of Bioscience and Bioengineering, 109 (3). 291 - 296. ISSN 1389-1723

Sarmidi, Mohamad Roji and M. J., Oh and M., Abdul Hamid and S., Ngadiran and Y. K., Seo and C. S., Park (2010) Ficus deltoidea (Mas cotek) extract exerted anti-melanogenic activity by preventing tyrosinase activity in vitro and by suppressing tyrosinase gene expression in B16F1 melanoma cells. Archives of Dermatological Research, 303 (3). 1 - 10. ISSN 0340-3696

Wahit, Mat Uzir and Hassan, Azman and Sabet, Mazyiar and T. Ratnam, Chantara (2010) Mechanical, thermal and electrical properties of ethylene vinyl acetate irradiated by an electron beam. Polymer-Plastics Technology and Engineering, 49 (6). 589 - 594. ISSN 0360-2559

Wan Abdul Rahman, Wan Aizan and Lee, Tin Sin and Rahmat, Abdul Razak and Abd. Samad, Adlina (2010) Thermal behaviour and interactions of cassava starch filled with glycerol plasticized polyvinyl alcohol blends. Carbohydrate Polymers, 81 (4). 805 -810. ISSN 0144-8617

Wan Alwi, Sharifah Rafidah and Hashim, Haslenda and Abd. Manan, Zainuddin and Z. B., Handani (2010) Holistic approach for design of minimum water networks using the Mixed Integer Linear Programming (MILP) technique. Industrial & Engineering Chemistry Research, 49 (12). 5742 - 5751. ISSN 0888-5885

Zahedi, Gholamreza and Elkamel, A. and Lohi, A. and Hatami, T. (2010) Optimization of supercritical extraction of nimbin from neem seeds in presence of methanol as co-solvent. The Journal of Supercritical Fluids, 55 (1). 142 -148. ISSN 0896-8446

Zainal Alam, Muhd. Nazrul Hisham and D., Schapper and K. V., Gernaey (2010) Embedded resistance wire as a heating element for temperature control in microbioreactors. JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 20 (5). 001-010. ISSN 0960-1317

Monograph

Johari, Anwar (2010) Effect of local daily time on the stagnation temperature at the focal point of a parabolic concentrated system. Project Report. Fakulti Kejuruteraan Kimia, Skudai, Johor. (Unpublished)

Thesis

Alias @ Che Rashid, Noor Izawati\ (2010) Isolation, expression and characterization of recombinant α-L-arabinofuranosidase from Aspergillus niger ATCC 120120 IN Pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical and Energy Engineering.

Abbood, Nabeel Kadhim (2010) A software for simultaneous targeting and design of a maximum heat recovery network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdullah, Norhanisah (2010) Anti-aging serum formulation based on labisia pumila extract. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Abdurahim, Mohd. Ezzad Iskandar (2010) Curing characteristics and tensile properties of natural rubber/expoxidized natural rubber-50 nanocomposites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Alias @ Che Rashid, Noor Izawati (2010) Isolation, expression and characterization of recombinant a-L-arabinofuranosidase from aspergillus niger ATCC 120120 in pichia pastoris. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Amri, Idral (2010) Comparison between axial and backflow model of ion exchange system for heavy metal removal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Andenan, Nurnadia (2010) Injection molded silane crosslinkable rice straw/high density polyethlene biocomposite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan, Nursia (2010) Magnetic separable photocatalyst beads for chromium (VI) reduction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Hassan @ Md. Sani, Muhammad Hafidzuddin (2010) The effect of plastics compositions and heating rates on the microwave-induced pyrolysis of mixed plastics waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Ismail , Azlyana (2010) Simultaneous targeting and design of minimum mass and energy network using graphical pinch analysisapproach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Jamaludin, Shafinaz (2010) Characterization, swelling behavior and field evaluation of oil palm empty fruit bunch based superabsorbent polymer composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Johari, Khairiraihanna (2010) Synthesis and charactrization of sulfur-functionalized spherical silica gels as mercury adsorbents. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mahani, Mahani (2010) Biosorption of gold(III), palladium(II) and silver(I) from aqueous solution onto low-cost durio zibethinus husk. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Mat Nayan, Nadirul Hasraf (2010) Characterization and biodegradability of foam based on coconut flesh waste-filled high density polyethylene. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Rosli, Noor Afizah (2010) Effect of styrene maleic anhydride on poly(vinylchloride)/polystyrene blends : mechanical and thermal properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Sayid Abdullah, Sharifah Husna Ajlia (2010) Formulation, efficacy and cytotoxicity study of carica papaya latex-based wound cleanser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Selamat, Siti Norina (2010) The stability of microencapsulated palm oil vitamin e concentrate using spray drying technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Susiwi, Susiwi (2010) Adsorption of metals from recovered base oil using zeolite. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Syed Mahamud, Syarifah Nuraqmar (2010) Polyamide 6 nanocomposites toughened with dynamically vulcanized epoxidized natural rubber-50. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Tee , Soo Yee (2010) Cloning and biochemical characterization of recombinant xylanase from Aspergillus fumigatus RT-1. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Yunos, Muhamad Zaini (2010) Rice straw fiber reinforced thermoplastic starch : effects of fiber content and sizes, starch type and glycerol. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.