Items where Division is "Civil Engineering" and Year is 2013

Article

A. Rashid, Ahmad Safuan and Md. Noor, Norhazilan and Mohd. Zuki, Siti Fatimah (2013) Empirical relationship between strength and liquidity index of cement stabilized kaolin. Malaysian Journal of Civil Engineering, 25 (2). pp. 287-293. ISSN 1823-7843

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) Development of students' knowledge-behavioural changes in relation to sustainability through a case study. Procedia - Social and Behavioral Sciences, 102 . 568–576. ISSN 1877-0428

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) Development of students' knowledgebehavioural changes in relation to sustainability through a case study. Procedia - Social and Behavioral Sciences, 102 . 568–576. ISSN 1877-0428

Abdul Hamid, Abdul Rahim and Besawa Jagar Singh, Bachan Singh and Mazlan, Muhammad Shahrom (2013) The construction labour shortage in Johor Bahru, Malaysia. IJRET: International Journal of Research in Engineering and Technology, 2 (10). pp. 508-512. ISSN 2319-1163

Abdul Hassan, Norhidayah and Hainin, Mohd. Rosli and Yaacob, Haryati and Ismail, Che Ros and Mohd. Yunus, Nur Zurairahetty (2013) Evaluation on mix design and rutting resistance of dry mixed rubberised asphalt mixtures. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 115-120. ISSN 0127-9696

Abdul Rahman, Siti Fatimah and Ismail, Mohammad and Md. Noor, Norhazilan and Bakhtiar, Hazri and Yahaya, Nordin and A. Rashid, Ahmad Safuan (2013) Evaluation of capacitor sensor performance in reinforced concrete for corrosion monitoring. Advances in Natural and Applied Sciences, 7 (2). pp. 179-185. ISSN 1995-0772

Ahmad, Yusof (2013) Ductility of timber beams strengthened using fiber reinforced polymer. Journal of Civil Engineering and Architecture, 7 (2). pp. 535-544. ISSN 1934-7359

Ahmad, Yusof and Koushfar, Kiarash and Abd. Rahman, Ahmad Baharuddin (2013) Bond behavior of the reinforcement bar in glass fiber-reinforced polymer connector. Journal GRADJEVINAR (Journal of Civil Engineers) of the Croatian Society of Civil Engineers, n/f (n/f). n/f. ISSN 1833-3001

Ahmed, Ishtiaque and Ahmed, Bayes and Hainin, Mohd. Rosli (2013) High-risk road accident corridors in Dhaka, Bangladesh. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 61-65. ISSN 0127-9696

Ahmed, Ishtiaque and Che Puan, Othman and Ismail, Che Ros (2013) A comparative review of road safety audit guidelines of selected countries. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 67-74. ISSN 0127-9696

Ahmed, Ishtiaque and Sithey, Gyambo (2013) Pedestrian day experience in Thimphu, Bhutan. Transport and Communications Bulletin for Asia and the Pacific, 82 (n/a). pp. 61-71. ISSN 0252-4392

Alam Talukder, Mohammad Mahbub and Islam, Md. Shahidul and Ahmed, Ishitiaque and Raihan, Md. Asif (2013) Causes of truck and cargo drivers' fatigue in Bangladesh. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 75-80. ISSN 0127-9696

Andalibizadeh, Behrouz and Marsono, Abdul Kadir (2013) Using constractability for commercialization of new academic ideas to improve and redesign sustainable construction by SMEs. Engineering Science and Technology: an International Journal (ESTIJ), 3 (6). pp. 762-768. ISSN 2250-3498

Arumugam, Ranjini and A. Rashid, Ahmad Safuan and Yaacob, Haryati and Md. Noor, Norhazilan (2013) Correlation between Liquidity Index (LI) & unconfined compressive strength of stabilized silty clay. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 450-454. ISSN 1991-8178

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) Circular HSC columns confined with pre-tensioned steel straps. International Journal of Research Development (IJORD), 1 (1). pp. 1-5. ISSN 2230-9926

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) Design of short SSTT confined HSC columns. International Journal of Research in Engineering and Technology (IJRET), 2 (8). pp. 331-336. ISSN 2319-1163

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) Design of short SSTT-confined HSC columns. International Journal of Research in Engineering and Technology (IJRET), 2 (8). pp. 331-336. ISSN 2319-1163

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) Effects of eccentricity on SSTT confined HSC columns. International Journal of Scientific & Engineering Research (IJSER), 4 (10). pp. 1694-1696. ISSN 2229-5518

Awang, Abdullah Zawawi and Omar, Wahid and Ma, Chau Khun and Liang, Maybelle (2013) The design of short sstt-confined circular HSC columns. International Journal of Research in Engineering and Technology, 2 (8). pp. 331-336. ISSN 2319-1163

Azman, M. and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Yaacob, Haryati and Ismail, Che Ros and Mazlan, Nur Shima Fadhilah and Ahmad Khairudin, Nurul Bahiyah (2013) Binding mode study of β-glucosidase b from p.Polymyxca with cellobiose and laminaribiose. International Journal of Chemical Engineering and Applications, 4 (6). pp. 410-414. ISSN 2010-0221

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir (2013) Life cycle assessment of brick and timber house and effects on climate change in Malaysia. Journal of Basic and Applied Scientific Research, 3 (9). pp. 305-310. ISSN 2090-4304

Balasbaneh, Ali Tighnavard and Marsono, Abdulkadir (2013) Life cycle assessment of brick and timber house and effects on climate change in Malaysia. Journal of Basic and Applied Scientific Research, 3 (9). pp. 305-310. ISSN 2090-4304

Behni, Arash and Kueh, Ahmad Beng Hong and Shabazi, Mohammad Mehdi and Ranjbar, Navid and Behnia, Nima and Vafaei, Mohamad Reza (2013) Finite element analysis of high modal dynamic responses of a composite floor subjected to human motion under passive live load. Latin American Journal of Solids and Structures, 10 (3). pp. 601-630. ISSN 1679-7817

Ben-Edigbe, Johnnie and Ghaemi, Syed Mehrdad and Mashros, Nordiana (2013) Prevalence of traffic kinematic wave at priority junction with entry hump. Malaysian Journal of Civil Engineering, 25 (2). pp. 169-176. ISSN 1823-7843

Che Puan, Othman and Fathullah, Hardi Saadullah and Yasin, M. Al Muz Zammil and Ibrahim, Muttaka Na’iya and Halim, Shafini (2013) Effect of skewed signalised T-intersection on traffic delay. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 17-24. ISSN 0127-9696

Che Puan, Othman and Yasin, M. Al–Muz–Zammil and Idris, Ahmad Kamal and Mohd. Amran, Mohd. Sofian (2013) Attracting international postgraduate students: the pulling factors. International Journal of Asian Business and Information Management, 4 (3). pp. 61-67. ISSN 1947-9638

Chee, Zhou Kam and Kueh, Ahmad Beng Hong (2013) Bending response of cross-ply laminated composite plates with diagonally perturbed localized interfacial degeneration. The Scientific World Journal, 2013 . ISSN 1537-744X

Farahdilla, Cut Elisa and Mansur, Shaiful Amri and Abdullah, Arham (2013) Common issues in post-disaster reconstruction. Malaysian Journal of Civil Engineering, 25 (2). pp. 267-276. ISSN 1823-7843

Fulazzaky, Mohamad Ali (2013) Calculation of the release of total organic matter and total mineral using the hydrodynamic equations applied to palm oil mill effluent treatment by cascaded anaerobic ponds. Bioprocess and Biosystems Engineering, 36 (1). pp. 11-21. ISSN 1615-7591

Fulazzaky, Mohamad Ali and Talaiekhozani, Amirreza and Abd. Majid, Muhd. Zaimi and Ponraj, Mohanadoss and Goli, Amin (2013) Evaluation of gas retention time effects on the bio-trickling filter reactor performance for treating air contaminated with formaldehyde. RSC Advances, 3 (38). pp. 17462-17468. ISSN 2046-2069

Fulazzaky, Muhamad Ali and Khamidun, Mohd. Hairul and Omar, Roslan (2013) Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models. Chemical Engineering Journal, 228 (n/a). pp. 1023-1029. ISSN 1385-8947

Goh, Lyn Dee and Bakhary, Norhisyam and Abdul Rahman, Azlan and Ahmad, Baderul Hisham (2013) Application of neural network for prediction of unmeasured mode shape in damage detection. Advances In Structural Engineering, 16 (1). pp. 99-113. ISSN 1369-4332

Hadibarata, Tony and Kristanti, Risky Ayu (2013) Biodegradation and metabolite transformation of pyrene by basidiomycetes fungal isolate Armillaria sp F022. Bioprocess and Biosystems Engineering, 36 (4). pp. 461-468. ISSN 1615-7591

Hainin, Mohd. Rosli and Rusbintardjo, Gatot and Abdul Aziz, Mohd. Azizi and Hamim, Asmah and Md. Yusoff, Nur Izzi (2013) Laboratory evaluation on steel slag as aggregate replacement in stone mastic asphalt mixtures. Jurnal Teknologi (Sciences and Engineering), 65 (2). pp. 13-19. ISSN 0127-9696

Hainin, Mohd. Rosli and Yaacob, Haryati and Haron, Zaiton (2013) Fatigue life of Malaysian hot mix asphalt mixes. Malaysian Journal of Civil Engineering, 25 (1). pp. 93-104. ISSN 1823-7843

Harun, Sobri and Hassan, Zulkarnain (2013) Impact of climate change on rainfall over Kerian, Malaysia with Long Ashton Research Station Weather Generator (LARSWG). Malaysian Journal of Civil Engineering, 25 (1). pp. 33-44. ISSN 1823-7843

Hassan, Zulkarnain and Harun, Sobri (2013) Impact of climate change on rainfall over Kerian, Malaysia with long ashton research station weather generator (LARS-WG). Malaysian Journal of Civil Engineering, 25 (1). pp. 33-44. ISSN 1823-7843

Ishak, M. F. and Ali, N. and Kassim, Azman (2013) The effect of tree induce suction on slope stabilization analysis. International Journal of Civil Engineering & Geo-Environment, 4 (n/a). n/a. ISSN 2180-2742

Ismail, Zulhilmi and Jumain, Mazlin and Jaffar Sidek, Faridah and Abd. Wahab, Ahmad Khairi and Ibrahim, Zulkiflee and Jamal, Mohamad Hidayat (2013) Scour investigation around single and two piers in side by side arrangement. International Journal of Research in Engineering and Technology, 2 (10). pp. 459-465. ISSN 2319-1163

Jajarmizadeh, Milad and Harun, Sobri and Mohsen, Salarpour (2013) An assessment on base and peak flows using a physically-based model. Research Journal of Environmental and Earth Sciences, 5 (2). pp. 49-57. ISSN 2041-0492

Jajarmizadeh, Milad and Harun, Sobri and Ghahraman, Bijan and Mokhtari, M. H. (2013) Modeling daily stream flow using plant evapotranspiration method. Inventi Impact: Water and Environment Journal, 1 . ISSN 2249-1368

Jeevaragagam, Ponselvi and Simonovic, Slobodan P. (2013) Improvement of streamflow simulation for gauge site of hydrological model. Malaysian Journal of Civil Engineering, 25 (2). pp. 239-253. ISSN 1823-7843

Johnnie, Ben-Edigbe and Mashros, Nordiana and Rahman, Raha (2013) Extent of sight distance reductions caused by rainfall on single carriageway roads. International Journal of Traffic and Transport Engineering, 3 (3). pp. 291-301. ISSN 1918-2538

Jumain, Mazlin and Ismail, Zulhilmi and Ibrahim, Zulkiflee and Zaini, Nur Atiah (2013) Sediment transport rate and bed formation in straight compound channels. Global Journal of Environmental Research, 7 (3). pp. 40-44. ISSN 1990-925X

Kamyab, Hesam and Soltani, Mohammad and Ponraj, Mohandoss and Md. Din, Mohd. Fadhil and Viony Putri, Erisa (2013) A review on microalgae as potential lipid container with wastewater treating functions. Journal of Environmental Treatment Techniques, 1 (2). pp. 76-80. ISSN 2309-1185

Lim, Chi Kim and Bay, Hui Han and Aris, Azmi and Abdul Majid, Zaiton and Ibrahim, Zaharah (2013) Biosorption and biodegradation of acid orange 7 by Enterococcus faecalis strain ZL: optimization by response surface methodological approach. Environmental Science and Pollution Research, 20 (7). pp. 5056-5066. ISSN 0944-1344

Lim, Chi Kim and Bay, Hui Han and Neoh, Chin Hong and Aris, Azmi and Abdul Majid, Zaiton and Ibrahim, Zaharah (2013) Application of zeolite-activated carbon macrocomposite for the adsorption of Acid Orange 7: isotherm, kinetic and thermodynamic studies. Environmental Science and Pollution Research, 20 (10). pp. 7243-7255. ISSN 0944-1344

M. H., Wan Ibrahim and Putra Jaya, Ramadhansyah and A., Zainorabidin and B. H., Abu Bakar and M. A., Megat Johari and N., Jamaludin (2013) Microstructural analysis of fired clay masonry brick under aggressive environment. International Journal of Enhanced Research in Science Technology & Engineering, 2 (1). pp. 1-5. ISSN 2319-7463

Mansur, Shaiful Amri and Abdullah, Arham and Cut Elisa Farahdilla, Cut Elisa Farahdilla (2013) Common issues in postdisaster reconstruction. Malaysian Journal of Civil Engineering, 25 (2). pp. 267-276. ISSN 1823-7843

Mashros, Nordiana and Johnnie, Ben Edigbe and Mohammed Al-Hassan, Hashim (2013) Determining flow density asymmetric curve using direct empirical approach. Caspian Journal of Applied Sciences Research, 2 (12). pp. 256-261. ISSN 2251-9114

Minhans, Anil (2013) Measurement of effectiveness and difficulty of traffic management measures in disasters. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 41-51. ISSN 0127-9696

Moayedi, Farzaneh and Zakaria, Rozana and Bigah, Yeoh and Mustafar, Mushairry and Che Puan, Othman and Zin, Irina Safitri and Klufallah, Mustafa M. A. (2013) Conceptualising the indicators of walkability for sustainable transportation. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 85-90. ISSN 0127-9696

Mohamed, Azman and Md. Nor, Hasanan and Hainin, Mohd. Rosli and Yaacob, Haryati and Ismail, Che Ros and Abd. Khalid, Nur Hafizah (2013) The effect of groove-underside shaped concrete block on pavement permanent deformation. Jurnal Teknologi (Sciences and Engineering), 61 (3). pp. 7-14. ISSN 0127-9696

Mohd. Said, Mohd. Ismid and Sabri, Shaikhah and Azman, Shamila and Muda, Khalida (2013) Arsenic, cadmium and copper in gastropod Strombus canarium in western part of Johor Straits. World Applied Sciences Journal, 23 (6). pp. 734-739. ISSN 1818-4952

Mohd. Yunus, Nor Zurairahetty and Dariusz, Wanatowski and L., R. Stace (2013) Lime stabilisation of organic clay and the effects of humic acid content. Geotechnical Engineering Journal of the SEAGS & AGSSEA, 44 (1). pp. 19-25. ISSN 0046-5828

Mohd. Yunus, Nor Zurairahetty and Wanatowski, Dariusz and Stace, L. R. (2013) The influence of chloride salts on compressibility behaviour of lime-treated organic clay. International Journal of Geotechnics, constructions, materials & environment (GEOMATE), 5 (1). pp. 640-646. ISSN 2186-2990

Mohsenipour, Morteza and Shahid, Shamsuddin and Nazemosadat, Mohammad Jafar (2013) Effects of El Nino southern oscillation on the discharge of Kor River in Iran. Advances In Meteorology, 2013 . ISSN 1687-9309

Momeni, Ehsan and Maizir, Harnedi and Gofar, Nurly and Nazir, Ramli (2013) Comparative study on prediction of axial bearing capacity of driven piles in granular materials. Jurnal Teknologi (Sciences and Engineering), 61 (3). pp. 15-20. ISSN 0127-9696

Muftah, Fadhluhartini and Muda, Mohd. Fakri and Mohd. Sani, Mohd. Syahrul Hisyam and Tan, Cher Siang (2013) Investigation on stress profile of double bolted cold-formed steel channel beam. International Journal of Engineering and Technology, 5 (4). pp. 466-468. ISSN 1793-8236

Oluwatosin, Akinmade and Johnnie, Ben Edigbe (2013) Effect of directional flow ratio on signalised intersection control strategies. ARPN Journal of Engineering and Applied Sciences, 8 (1). pp. 33-39. ISSN 1819-6608

Ponraj, Mohanadoss and Md. Din, Mohd. Fadhil (2013) Effect of light/dark cycle on biomass and lipid productivity by Chlorella pyrenoidosa using palm oil mill effluent (POME). Journal of Scientific and Industrial Research, 72 (11). pp. 703-706. ISSN 0022-4456

Ramli, Izzul and Yaacob, Haryati and Abdul Hassan, Norhidayah and Ismail, Che Ros and Hainin, Mohd. Rosli (2013) Fine aggregate angularity effects on rutting resistance of asphalt mixture. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 105-109. ISSN 0127-9696

Rezania, Shahabaldin and Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Md. Sairan, Fadzlin and Kamaruddin, Siti Fatimah (2013) Nutrient uptake and wastewater purification by water hyacinth and its effect on plant growth in a batch system. Journal of Environmental Treatment Techniques, 1 (2). pp. 81-85. ISSN 2309-1185

Sheikh, Salman Ullah and Md. Yusoff, Nur Izzi and Hainin, Mohd. Rosli and Hamim, Asmah and Ismail, Che Ros (2013) Evaluation of rutting potential of hot mix asphalt in variable conditions. The Journal of the Institution of Engineers of Malaysia (IEM), 47 (1). 10 pg. ISSN 0126-513X

Sultan Sidi, Noor Sharipah and Zardari, Noorul Hassan and M. I., Nabilah (2013) Identification of major problems with urban water supply in selected areas of Johor Bahru, Malaysia. Resources and Environment, 3 (5A). pp. 23-28. ISSN 2163-2618

Tan, Cher Siang and Muftah, Fadhluhartini and Mohd. Sani, Mohd. Syahrul Hisyam and Muda, Mohd Fakri (2013) Investigation on stress profile of double bolted coldformed steel channel beam. International Journal of Engineering and Technology, 5 (4). pp. 466-468. ISSN 1793-8236

Tukimat, Nurul Nadrah Aqilah and Harun, Sobri (2013) Multi-Correlation Matrix (M-CM) for the screening complexity in the Statistical Downscaling Model (SDSM). International Journal of Engineering Science and Innovative Technology (IJESIT), 2 (6). pp. 331-343. ISSN 2319-5967

Vakili, Amir Hossein and Selamat, Mohamad Razip and Moayedi, Hossein (2013) Effects of using pozzolan and Portland cement in the treatment of dispersive clay. Scientific World Journal . ISSN 1537-744X

Wai, Soon Han and Md. Yusof, Aminah and Ismail, Syuhaida and Ng, C. A. (2013) Exploring success factors of social infrastructure projects in Malaysia. International Journal of Engineering Business Management, 5 (1). pp. 1-9. ISSN 1847-9790

Wan Ibrahim, Mohd. Haziman and Putra Jaya, Ramadhansyah and Zainorabidin, Adnan and Abu Bakar, Badorul Hisham and Megat Johari, Megat Alwi (2013) XRD investigation of fired clay brick masonry subjected to aggressive environment. International Journal of Engineering Research and Development, 5 (11). pp. 74-77. ISSN 2278-800X (Print); 2278-067X (Online)

Yaacob, Haryati and Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and M. Warid, Naqiuddin and Chang, Fung-Lung and Ismail, Che Ros and Abdul Hassan, Norhidayah (2013) Bitumen emulsion in Malaysia-a conspectus. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 97-104. ISSN 0127-9696

Zainal Abidin, Ahmad Razin and Izzuddin, Bassam (2013) Meshless local buckling analysis of steel beams with irregular web openings. Engineering Structures . ISSN 0141-0296

Zakaria, Rozana and Foo, Kian Seng and Abd. Majid, Muhd. Zaimi and Mohamad Zin, Rosli and Hainin, Mohd. Rosli and Che Puan, Othman and Yaacob, Haryati and Derin, Noriha and Ainee, Farinie and Hamzah, Norlizah and Balubaid, Saied Omar and Mazlan, Ain Naadia and Ismail, Mohd. Affendi and Yazid, Yazlin Shalfiza and Raja Mohd. Rooshdi, Raja Rafidah and Moayedi, Farzaneh (2013) Energy efficiency criteria for green highways in Malaysia. Jurnal Teknologi (Sciences and Engineering), 65 (3). pp. 91-95. ISSN 0127-9696

Book Section

Shahid, S. (2013) Spatial assessment of drought hazard, vulnerability and risk in Bangladesh. In: Droughts: New Research. Nova Science Publishers, Inc., pp. 215-241. ISBN 978-162100769-2

Solemon, B. and Sahibuddin, S. and Ghani, A. A. A. (2013) Requirements engineering process improvement and related models. In: Software Design and Development: Concepts, Methodologies, Tools, and Applications. IGI Global, pp. 203-218. ISBN 978-146664302-4

Conference or Workshop Item

A Rashid, Ahmad Safuan (2013) Quantifying pavement interface bond strength trought different approaches : a compiliation of testing device. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

A Rashid, Ahmad Safuan (2013) Relationship between liquidity index and strength of stabilised laterite. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

A. Rashid, Ahmad Safuan (2013) A comparative study on three-dimensional and two-dimensional slope stability analysis in calculating the value of factor of safety. In: GEOCON International Conference 2013, Johor Malaysia, 28-30 October 2013 , 2013.

A. Rashid, Ahmad Safuan (2013) Influence of transport layer slope under rainfall infiltration. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013).

A. Rashid , Ahmad Safuan (2013) Bearing capacity of soil reinforced with soil-cement columns formed by the deep mixing method. In: Third International Conference on Geotechnique, Construction Materials and Environment, Nagoya, Japan, Nov. 13-15, 2013, ISBN: 978-4-9905958-2-1 C3051.

A. Rashid , Ahmad Safuan (2013) Coupling effect of scution variation on riversidebank stability. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013).

Ab. Kadir, Mariyana Aida (2013) Modelling of heat tranfer analysis of the roorkee frame. In: The 9th International Conference on Geotechnical and Transportation Engineering (GEOTROPIKA 2013) and Construction The 1st Conference on Construction and Building Engineering (ICONBUILD 2013), 2013.

Abd Rahman, Norhan (2013) Impact of urban development on groundwater quality in Madinah City, Saudi Arabia. In: 6th International Perspective on Water Resources & The Environment , 2013.

Abd Rahman , Norhan (2013) Adopting mitigation measure for ecology and ecosystem of highway. In: International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), 2013.

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) Development of students’ knowledge-behavioural changes in relation to sustainability through a case study. In: 6th International Forum on Engineering Education (IFEE 2012).

Abdul Aziz, Azmahani and Mohd. Yusof, Khairiyah and Udin, Amirmudin and Mohamad Yatim, Jamaludin (2013) A longitudinal study on the impact of cooperative problem-based learning in inculcating sustainable development. In: The 4th International Research Symposium on Problem-Based Learning (IRSPBL) 2013, 2013.

Abdul Hamid, Abdul Rahim and Singh, Bachan and Abdullah, Athira (2013) The practices of corporate social responsibility among construction companies in Malaysia. In: The 9th International Conference of Geotechnical & Transportation Engineering (Geotropika) and The 1st International Conference on Construction and Building Engineering (ICONBUILD 2013), 2013.

Abdul Hassan, Norhidayah (2013) Microstructural study of reclaimed asphalt specimen preparation using x-ray computed tomography. In: International Conference On Asphalt Materials, 2013.

Abdul Hassan, Norhidayah (2013) Microstructure study of asphalt specimen preparation using X-Ray tomography images. In: International Conference On Advanced Material Research, 2013.

Abdul Hassan, Norhidayah (2013) A review of waste oil application in pavement materials. In: 9th International Conference of Geo-Technical & Transportation Engineering(GEOTROPIKA), 2013.

Abdullah, M. E. and Zamhari, K. A. and Shamshudin, M. K. and Hainin, M. R. and Satar, M. K. I. M. (2013) Rheological properties of asphalt binder modified with chemical warm asphalt additive. In: Advanced Materials Research.

Abdullah, Redzuan (2013) Parametric study of concrete load bearing wall with opening for double storey houses. In: The International Graduate Conference on Engineering, Science and Humanities (IGCEISH2013), 2013, Universiti Teknologi Malaysia (UTM), Johor, Malaysia.

Abdullah, Rini Asnida and Mohd. Amin, Mohd. For and A. Rashid, Ahmad Safuan (2013) Discrete element modelling in rock slope stability analysis. In: The 9th International Conference on Geotechnical and Transportation Engineering GEOTROPIKA 2013 and the 1st International Conference on Construction and Building Engineering ICONBUILD 2013 (GEOCON 2013), 2013.

Abideen , Muzaffar Zainal (2013) Improving the coagulation process in drinking water treatment using response surface method jar test. In: International Conference on Innovation Challenges in Multidisciplinary Research & Practice 2013.

Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Najafian, G. (2013) Comparison of extreme responses from wheeler and vertical stretching methods. In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, 9-14 Jun 2013, Nantes, France.

Adnan, Azlan (2013) Dynamic soil-pile interaction under earthquake events. In: AWAM International Conference on Civil Engineering & Geohazard Information Zonation, 28-30 Aug 2012, Batu Ferringhi, Penang.

Ahmad , Yusof (2013) Determination of poisson's ratio for local timber. In: n/a, 2013.

Ahmed, Ishtiaque (2013) A comparative review of preliminary police crash report forms of selected agencies. In: Road Safety International Conference, 2013.

Alel, Mohd. Nur Asmawisham and Ghafar, M. and Ramly, N. and Adnan, A. (2013) Preliminary seismic vulnerability assessment of Kundasang, Sabah, Malaysia. In: Conference Geotropika & Icon Build 2013 (GEOCON2013) - Paper 1, 2013.

Alel, Mohd. Nur Asmawisham and Ramly, N. and Ghafar, M. and Adnan, A. (2013) Estimation of life casualties for seismic vulnerability assessment in Bukit Tinggi, Pahang, Malaysia. In: Conference Geotropika & Icon Build 2013 (GEOCON2013) - Paper 2, 2013.

Ali , Nazri (2013) Soil suction profile due to tree induce suction. In: GEOCON International Conference 2013, Johor Malaysia, 28-30 October 2013 , 2013, Johor Malaysia.

Alias, Noraliani (2013) First flush analysis in urban catchments. In: 16th International Conference on diffuse Pollution and Eutrophication.

Anuar, Aznah Nor (2013) The effect of cycle time on the characteristics and perFormance of aerobic granular sludge treating high strength wastewater. In: 5th IWA-ASPIRE Conference & Exhibition, 2013.

Anuar, Aznah Nor (2013) Performance of aerobic granular sludge sequencing batch reactor treating rubber wastewater at different hydraculis retention time. In: 5th IWA-ASPIRE Conference & Exhibition, 08 - 12 September 2013, Daejeon, Korea.

Anuar, Aznah Nor (2013) A review on the development and application of aerobic granular sludge for wastewater treatment. In: Water Malaysia 2014, 2013.

Anuar, Aznah Nor (2013) Treatment of rubber wastewater using aerobic granular sludge in a sequential batch reactor. In: 4th International Graduate Conference on Engineering, Science and Humanities 2013 (IGECESH 2013), 2013.

Aris, Azmi (2013) Enhancement of hydroxyl radical formation in hydrodynamic cavitation using multiple orifice plates. In: International Conference on Innovation Challenges in Multidisciplinary Research & Practice (ICMRP),.

Asri, Z and Singh, Bachan and Abdul Hamid, A.R (2013) Squatter houses in the area of Johor Bahru id 227. In: Proceeding GEOCON 2013, 28th-30th October 2013, Persada Johor International Convention Centre, Johor Bahru, Johor.

Bakhary , Norhisham (2013) Prediction of unmeasured modal data using statistical multi-stage ann fordamage detection: an experimental verification. In: 15th Asia Pacific Vibration Conference, 2013.

Balasbaneh, Ali Tighnavard and Marsono, Abdul Kadir and Yahya, Khairulzan (2013) Life cycle assessment of two different IBS of recipe endpoint (E) LCIA method. In: 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013).

Davide, Lo Presti and Abdul Hassan, Norhidayah and Airey, Gordon D. and Collop, Andrew (2013) Fundamental characterisation of reclaimed asphalts: the importance of testing homogeneous specimens. In: European Asphalt Technology Association Conference.

Goh, W. I. and Mohamad, N. and Abdullah, R. (2013) Development of precast lightweight foamed concrete sandwich panel (PLFP) with double shear truss connector: an overview. In: Advanced Materials Research.

Hainin, Mohd. Rosli (2013) Steel slag utilization: prospects and challenges. In: GECON 2013, 2013.

Hainin, Mohd. Rosli and A. Aziz, Md. Maniruzzaman and Adnan, Abbas Mukhtar and Abdul Hassan, Norhidayah and Jaya, Ramadhansyah Putra and Liu, Hong Y. (2013) A review on the performance of modified asphalt binder with tire rubber powder. In: A Joint Conference of International Conference in Geotechnical and Transportation Engineering (9th GEOTROPIKA) and International Conference of Innovative Construction and Buildings (1st ICONBUILD), 2013.

Hassan, I. O. and Ismail, M. and Noruzman, A. H. and Yusuf, T. O. and Mehmannavaz, T. and Usman, J. (2013) Characterization of some key industrial waste products for sustainable concrete production. In: Material Design, Processing And Applications, Parts 1-4.

Hezmi, Muhammad Azril and Zahari, Mohd. Zakri and Sa’ari, Radzuan (2013) Preliminary study on water retention behaviour of compacted koalin. In: The 9th International Conference on Geo-technical & Transportation Engineering (GEOTROPIKA) and The 1st International Conference on Construction and Building Engineering (ICONBUILD), 2013.

Hidayah, Nurul and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Abdullah, Mohd. Ezree (2013) A short review of waste oil application in pavement materials. In: A Joint Conference of International Conference in Geotechnical and Transportation Engineering (9th GEOTROPIKA) and International Conference of Innovative Construction and Buildings (1st ICONBUILD), 2013.

Hosseinian, Seyyed Shahab and Jabbrani Torghabeh, Zahra and Ressang, Aziruddin (2013) Relative importance of factors affecting construction hazards in the design phase. In: Applied Mechanics and Materials (Volume 330).

Ibrahim , Izni Syahrizal (2013) The mechanical properties of hybrid fibre reinforced composite concrete. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 2013.

Idham, M. K. and Hainin, M. R. and Yaacob, H. and Warid, M. N. M. and Abdullah, M. E. (2013) Effect of aging on resilient modulus of hot mix asphalt mixtures. In: Advanced Materials Research.

Ismail, M. and Yusuf, T. O. and Noruzman, A. H. and Hassan, I. O. (2013) Early strength characteristics of palm oil fuel ash and metakaolin blended geopolymer mortar. In: Material Design, Processing And Applications, Parts 1-4.

Jabbarani Torghabeh, Zahra and Hosseinian, Seyyed Shahab. and Ressang, Aziruddin (2013) Risk assessment of ergonomic risk factors at construction sites. In: Applied Mechanics and Materials (Volume 330).

Jabbarani Torghabeh, Zahra and Hosseinian, Seyyed Shahab and Ressang, Aziruddin (2013) Relative importance of hazards at construction sites. In: Applied Mechanics and Materials (Volume 330) June 2013, Zurich.

Jaya, R. P. and Muhamad Nor, M. A. A. and Ahmad, Z. A. and Mohd. Amin, Z. (2013) Properties of mortar containing rice husk ash at different temperature and exposed to aggressive environment. In: Advanced X-Ray Characterization Techniques.

Lee, Yee Ling and Tan, Chersiang and Lee, Yeonghuei and Mohammad, Shahrin and Tahir, Mahmood Md Md and Shek, Poingian (2013) Effective steel area of fully embedded cold-formed steel frame in composite slab system under pure bending. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012, 2 November 2012 through 6 November 2012, Kaohsiung; Taiwan.

Lee, Hoong Pin and Awang, Abdullah Zawawi and Omar, Wahid (2013) Behaviour of Steel Strapping Tensioning Technique (SSTT) confined high-strength concrete with different lateral pre-tensioning stresses. In: The 4th International Graduate Conference on Engineering Science & Humanity 2013 (IGCESH2013) , 16th - 17th April 2013, UTM Skudai, Johor, Johor Bahru.

Lee, Yeonghuei and Tan, Chersiang and Lee, Yee Ling and Tahir, Mahmood Md Md and Mohammad, Shahrin and Shek, Poingian (2013) Numerical modelling of stiffness and strength behaviour of top-seat flange-cleat connection for cold-formed double channel section. In: 2nd International Conference on Engineering and Technology Innovation 2012, ICETI 2012;, 2 November 2012 through 6 November 2012, Kaohsiung; Taiwan.

Ma, Chow Khun and Awang, Abdullah Zawawi and Omar, Wahid (2013) Eccentrically loaded externally confined HSC columns. In: GEOCON 2013, 2013.

Mohamad, M. I. and Nekooie, M. A. and Ismail, Z. B. and Taherkhani, R. (2013) Amphibious urbanization as a sustainable flood mitigation strategy in South-East Asia. In: Advanced Materials Research.

Mohamad, Noridah and Wan, Inn Goh and Abdullah, Redzuan and Ahmad, Ismail and Samsuddin, S. and Abd. Rahman, Mohd. Hadi (2013) Ultimate load carrying capacity of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with double shear truss connectors under axial and eccentric loading. In: International Civil and Infrastructure Engineering Conference 2013, 2013.

Mohammad, Shahrin (2013) Quick installation composite slab system for pre-fabricated structures. In: Proceedings on sustainable built environment, March,2013, 2013, Hanoi.

Mohd. Affendi, I. and Rozana, Z. and Sani, B. A. and Foo, K. S. and Ain Naadia, M. and Yazlin Salfiza, Y. and Rosli, M. Z. and Mushairry, M. and Hasrul Haidar, I. and Norhaliza, H. and Nurfatimah, M. and Muhd. Zaimi, A. M. (2013) Fundamental elements of Malaysia green highway. In: Applied Mechanics And Materials.

Mohd. Yunus, Nor Zurairahetty and Yong, Chin Yung and Abdullah @ Aziz, Norliana (2013) Stabilization of laterite soil by canlite. In: 9th International Conference of Geo-Technical & Transportation Engineering (Geotropika) and 1st International Conference on Construction and Building Engineering (Iconbuild) (Geocon), 2013.

Nazir, Ramli and Syam, Affiz and Razak, A. and Mansor, M. (2013) A case history of ground improvement work for Kuala Lumpur International Airport 2. In: Foundation and Soft Ground Engineering Conference, Thu Dau Mot University ICTDMU-1, Binh Duong, , 5-6 June 2013, Binh Duong, Vietnam.

Noruzman, A. H. and Ismail, M. and Bhutta, M. A. R. and Yusuf, T. O. and Shehu, I. A. and Hassan, I. O. (2013) Strength and durability characteristics of polymer modified concrete incorporating vinyl acetate effluent. In: Material Design, Processing And Applications, Parts 1-4.

Oluwasola, Ebenezer and Hainin, Mohd. Rosli and Aziz, M. M. A. and M. Warid, M. Naqiuddin (2013) Potentials of steel slag and copper mine tailings as construction materials: a review. In: 1st International Conference on the Science & Engineering of Materials (ICoSEM 2013), 2013.

Reni, Suryanita and Adnan, Azlan (2013) Application of neural networks in bridge health prediction based on acceleration and displacement data domain. In: Proceedings of the International MultiConference of Engineers and Computer Scientists 2013 Vol I, IMECS 2013, 13th - 15th March 2013, Hong Kong.

Rusli, Nursalasawati and Kueh, Ahmad Beng Hong and Kasiman, Erwan Hafizi (2013) The effect of magnetisation and lorentz forces in a two-dimensional biomagnetic channel flow. In: Aip Conference Proceedings.

Saad, Rosli and Mohamad, Edy Tonnizam and M. M., Nordiana and I. N., Azwin and Mohd. Akip Tan, Norsalkini (2013) Assessment of quarry volume using 2-D resistivity imaging method. In: AIP Conference Proceedings.

Saggaff, A. and Tahir, M. M. and Shek, P. N. (2013) Flexural behavior of steel reinforced brick beam utilizing interlocking brick system. In: Advanced Materials Research.

Sarbini, Noor Nabilah and Ibrahim, Izni Syahrizal and Saim, A. Aziz (2013) Shear behaviour of composite slab reinforced with steel fibre concrete topping. In: Thirteenth East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-13), 2013.

Talaiekhozan, Amirreza and Keyvanfar, Ali and Andalib, Ramin and Shafaghat, Arezou (2013) A novel taxanomy on self-healing concrete research development. In: 3rd National Conference on Applied Chemistry in Novel Technologies, 2013.

Wai, Loan Liew and Kassim, Mohd. Azraai and Muda, Khalida and Soh, Kheang Loh and Abdullah @ Aziz, Norliana (2013) Performance evaluation of Industrial Effluent Treatment Systems (IETSS) an insight for biotechnology advances in agro-based wastewater treatment. In: Innovation Challenges In Multidisciplinary Research and Practice (ICMRP), 2013.

Wan, Inn Goh and Mohamad, Noridah and Abdullah, Redzuan and Abdul Samad, Abdul Aziz (2013) Compression test and finite element analysis of foamed concrete cube. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET).

Yaacob, H. and Hainin, M. R. and Chang, F. L. (2013) Properties of single face compacted porous asphalt. In: Applied Mechanics And Materials.

Zakaria, R. and Amirazar, A. and Mustaffar, M. and Mohammad Zin, R. and Abd. Majid, M. Z. (2013) Daylight factor for energy saving in retrofitting institutional building. In: Advanced Materials Research.

Zakaria, R. and Foo, K. S. and Ainee, F. and Majid Abd., M. Z. and Mohamad Zin, R. and Hainin, M. R. and Yaacob, H. and Hamzah, N. and Balubaid, S. O. and Mazlan, A. N. and Ismail, M. A. and Yazid, Y. S. and Haidar, H. and Marwar, N. (2013) Energy consumption and potential retrofitting of rest and service areas (RSAS) in Malaysia case study. In: Applied Mechanics And Materials.

Book

Ujang, Zaini (2013) Financial framework of higher education in Malaysia. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0910–9

Ujang, Zaini (2013) Kerangka kewangan pengajian tinggi di Malaysia. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0909–3

Ujang, Zaini (2013) Menyuburkan kembali jiwa akademia. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0886–7

Ujang, Zaini (2013) Revitalizing the soul of higher learning. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0893–5

Thesis

Maleka, Abdulmalik Musa (2013) Effect of palm oil fuel ash (POFA) fineness on the properties of asphaltic concrete AC 14. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahjoub, Reza (2013) Characterization of continuous kenaf-glass fiber hybrid composites for structural application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A.Rahman @ A.Rahim, Nor Hidayah (2013) Design of mechanically stabilized earth wall-reinforced earth wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abbas, Hajer Satih (2013) Parametric analysis of corrugated plate by using ANSYS finite element software. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Aziz, Zaheder (2013) Simulation on the effect of submerged breakwater to the wave transmission and run-up. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Kadir, Muhammad Adam (2013) Key performance indicators for value management implementation in construction industry. Masters thesis, Universiti Teknologi Malaysia.

Abd. Karim, Zaini (2013) Influence of flaky aggregate on marshall properties for asphaltic concrete AC20 mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Nazir, Mohd. Zhafri Jamil (2013) Meshfree formulation for inverse frequencies analysis incorporating artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Mohd. Shahrizan (2013) Project information collaboration using P6. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Muhammad Faiz (2013) Aggregate flakiness influences on AC14 towards resilient and creep modulus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Gafoor, Mohamed Saakhee (2013) Simulation of blast-induced failure of case study structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Razak, Zawiyah (2013) Telecommunication towers assessment system in consideration of earthquakes effects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Ikmalzatul (2013) Effects of envelope color and heat insulation on building thermal performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

AbdulWahab, Osama AbdulRazak (2013) Finite element simulation of reinforced concrete deep beam with opening strengthened with FRP laminates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abo Sabah, Saddam Hussein Ali (2013) Finite element modeling of laminated composite plates with locally delaminated interface subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Bakar, Amyrhul (2013) Hydrodynamic modeling of Malacca Straits using EFDC. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu Draz, Ahmed M. A. (2013) Utilization of building debris recycle aggregate in asphalt binder course mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adam Arbab, Mudathir Omer (2013) Green highway ecology and ecosystem preservation and restoration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adebayo, Ibrahim Hussein (2013) Adopting lean management in Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Mohd. Asrul (2013) Delay approval in Private Finance Initiative (PFI) project in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahankoob, Alireza (2013) Selection of material suppliers by the contractors in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Afham Zulhusmi (2013) Utilizing silica fume for development of concrete strength. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Bakori (2013) Contract administration problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Dzulkarnain (2013) Element free Galerkin method of composite beams with partial interaction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Suriati (2013) Analysis of a continuous multicellular curved bridge deck using grillage analogy method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Khalid, Mariatul Qibtiyah (2013) Quality function deployment to achieve optimum design solution for transmission line projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Tarmuzi, Nadhir (2013) The effect of aggregateÆs angularity on engineering properties and performance of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Tarmuzi, Nadhir (2013) The effect of aggregate’s angularity on engineering properties and performance of porous asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Bamaga, Saleh Omar (2013) Structural behaviour of composite beams with cold formed steel section. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Musa, Idris Hassan (2013) A study of waste materials in conventional construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Osman, Abubaker Mohamed (2013) Developement of Seismic Hazard Assesment For Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alerasoul, Sepehr (2013) Consultancy services in the Middle East construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Algaifi, Hassan Amer Ali (2013) Development of finite element formulation for plate buckling structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alhassan, Hashim Mohammed (2013) Influence of rainfall on the capacity of single carriageway in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Hassan, Filzah (2013) Analysis of domestic water consumption in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amin, Rasoulijavaheri (2013) The requirement for implementation of open building system in terrace houses in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amir Mohamed, Sharil Amran (2013) Management of variation order in Public Work Department Malaysia construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ansari, Reza (2013) The characteristics of a sustainable bridge : a case study of Second Penang Bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ansari, Reza (2013) The characteristics of a sustainable bridge: a case study of Second Penang Bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Aramesh, Mohsen (2013) Project portfolio risk management based on group decision making methodology in fuzzy environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asadsangabifard, Mohammadjavad (2013) Temporal and spatial variations of Grey-water (sullage) properties from residential and commercial areas in Melana catchment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asgari, Hamid (2013) Simulation of non-point sources of pollution in a heterogeneous media by using 2D regional groundwater flow model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ashoori, Omid (2013) Portfolio risk analysis by using multi criteria decision making method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asri, Afiqah Ziela (2013) Squatter houses in the area of Johor Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Abdullah Zawawi (2013) Stress-strain behaviour of high-strength concrete with lateral pre-tensioning confinement. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang Yunus, Awang Ihsan (2013) Customer satisfaction towards the facilities management services at the Plaza Merdeka Shopping Mall Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang Yunus, Awang Ihsan (2013) Customer satisfaction towards the facilities management services at the Plaza Merdeka shopping mall, Kuching. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ayop, Zalilah (2013) Post-tension column for IBS blockwork building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Badli, Mohamad Iqbal (2013) Non-linear Meshfree formulation of anchored reinforcing bar with bond slip effect. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Badri Hamid, Ahmed Ali (2013) Factors affecting the success of a construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Barati, Reza (2013) Evaluation on benefits and problems of conventional and BIM based documentation through comparison method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chai, Kin Yun (2013) Noise management on construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chan, Jia Ying (2013) The effect of tree-induced suction on two-layered slope stability under rainfall infiltration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che' Mat, Nurulain (2013) Effect of modified sasobit on performance asphalt mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chew, Yun Lieh (2013) Mechanical behavior of sand-tire chips mixture under monotonic loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chraghipoor, Reza (2013) Flexural behavior of PFA reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dawi, Stephanie Stella (2013) Occupational noise exposure among construction workers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eh Rak, Aweng (2013) Integration of the river ecosystem attributes for river health assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Elsayed, Mohamed Ahmed Abdelhadi (2013) Applicability of SIDRA for heterogeneous traffic. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faizi, Koohyar (2013) Evaluation of failure mechanism of pile under pullout test in loose sand by PIV method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faqe Rahim, Aso Abdulghafur (2013) Comparison of analysis models for semi circular curved box-girder bridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Far, Mohammad Zarin (2013) Maintenance of water supply network in Bandar Abbas sea port city in Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fard, Khalil Mashalpour (2013) Mitigation of progressive collapse in concrete structure incorporating the GSA linear static procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fathullah, Hardi Saadullah (2013) Effect of skewness on delay at signalized intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foroutan, Maziar (2013) Coupling effect of suction variation on riverbank stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gey, Eng Keat (2013) The effects of broadleaf carpet grasses (axonopus compressus) on shallow slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghasemi, Mohammad Mir (2013) Challenges faced by architect as a project manager. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghavami Rad, Farzan (2013) Global warming potential of building demolition activities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghazali, Aqilah (2013) Behaviour of axially loaded pile under ground heaving. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghomi, Saeid Khalili (2013) Building information modeling in planning and scheduling phase in Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Golizadeh, Hamed (2013) Predicting the required duration for construction activities using Artificial Neural Networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hajihassani, Mohsen (2013) Tunneling-induced ground movement and building damage prediction using hybrid artificial neural networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hameed, Hazhar Ali (2013) Performance of blended cement self compacting concrete by using slag. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasen, Rabee Abdaljaleel (2013) Properties of asphalt concrete incorporating grumb rubber produced through dry process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassaniavarzaman, Mehdi (2013) Time and cost overrun of construction projects in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heydari Afshar, Raheleh (2013) The prevalence of stress among project managers at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hossein, Aslani (2013) Influence of chemical and mineral admixtures on shrinkage and creep of prepacked aggregate concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hosseini, Seyed Hamed (2013) Nonlinear finite element modeling for steel beam-column connection attached with top and seat angle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hosseini, Seyedmohsen (2013) The implementation of eco-labelling for construction materials in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hosseinpour, Emad (2013) Flexural behavior of steel reinforced brick beam utilizing interlocking brick system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Husin, Sufian (2013) Design process improvement by integrating principles of constructability knowledge to the monorail system project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein, Ahmed Abdulameer (2013) Trip generation rate of fast-food restaurants in Johor Bahru area. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein Amran, Mugahed Yahya (2013) The mechanism of failure of structural lightweight concrete infill of IBS blocks subjected to flexural. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Mohamud Abdirahman (2013) Finite element modeling of composite plates with total imperfect interface subjected to impact loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishag Adam, Elwalid Adam (2013) Finite element analysis of prestressed pretension concrete T-Beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohd. Affendi (2013) Weight age factor for Malaysia green highway assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Mohd. Affendi (2013) Weightage factors for Malaysia green highway assessment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Tarmizi (2013) Water supply reservoir operation in the framework of climate variability and change. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Iswandi, Aifi Andrice Izhar (2013) External cost of noise effect on construction workers using impact pathway approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaafar, Hazriq Izzuan (2013) PSO-Tuned PID controller of a gantry crane system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jailani, Nurul Farhana (2013) Extent of traffic shockwave propagation induced by midblock U-turn facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jainudin, Noor Azland (2013) Cost benefits study of solar photovoltaic implementation for residential areas in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jajarmizadeh, Milad (2013) Streamflow modeling of a large arid catchment using semi-distributed hydrological model and modular neural network. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

James Gerusu, Geoffery (2013) Partitioning of rainfall and flowpath processes in small oil palm catchments. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamion, Nazaruddin (2013) Performance of micro surfacing on expressway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jarkasi, Mohd. Daud (2013) Influence of aggregate flakiness on marshall properties for asphaltic concrete (AC14) mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

K. Baskran, B. Gevansri (2013) Corruption in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kaini, Iman (2013) Implementation of Integrated Project Delivery (IPD) and Building Information Modelling (BIM) in the construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kalatehjari, Roohollah (2013) An improvised three-dimensional slope stability analysis based on limit equilibrium method by using particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kamarudin, Suhaida @ Suhana (2013) Potential improvement for effective implementation of E-tendering system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Keyvanfar, Ali (2013) Adaptive behavior satisfaction index analysis framework for energy efficient building assessment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalajmasoumi, Mohammad (2013) Computational modelling of hard polyethylene precast panel for temporary supporting of tunnel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khoshnava, Seyed Meysam (2013) Examination of IBS as green and sustainable construction through application of BIM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lau, Hui Hie (2013) Economic aspect of square hollow section (SHS) in the design of multi-storey unbraced steel frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Liew, Yee Shian (2013) Evaluation of bond strength between hot mix asphalt surfacing layers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Kim Ong (2013) Slope stability analysis by using multiple shear strength model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, How Ing (2013) Computer model on linear wave propagation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Jacky Jia Yii (2013) Effect of bottom ash on the strength characteristics of fly ash and bottom ash mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loh, Allan Wei Leong (2013) Roles and responsibilities of project participants as a determinant of risk mitigation for injury on construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahlouji, Javid (2013) Analysis of steel-reinforced concrete-filled steel tubular and concrete-filled steel tubular columns under cyclic loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmud, Mohd. Zul Hanif (2013) Influence of flaky aggregate towards creep and resilient modulus on asphalt concrete 20. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Maleka, Abdulmalik Musa (2013) Effect of palm oil fuel ash (POFA) fineness on the properties of asphaltic concrete AC14. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mardi, Marini (2013) Deflection analysis of underpinned secant pile wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marwan, Hazlina (2013) An investigation on vehicle overloading in Muar - Melaka road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Masri, Khairil Azman (2013) The effect of fine aggregate angularity on marshall properties of asphalt concrete AC10. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Matori, Mohd. Yazip (2013) Factors influencing the strength of foamed bitumen stabilised mix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mazlan, Ain Naadia (2013) Social and safety elements in green highway index. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Dalib, Md. Sazali (2013) Korean company practice in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Nasir, Noor Izaidah (2013) The construction of road diversion in swampy area ta Jalan Lencongan Kurong Tengah, Perlis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Zaid, Nur-ul Balqes (2013) Evaluation of skidding performance of asphalt surface using Griptester and British skid Pendulum device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mirshekari, Mostafa (2013) Dynamic simulation of columns considering geometric nonlinearity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Miryousefi Ata, Seyedeh Sara (2013) Foreign workers in Middle East construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misbah, Nurfarahin (2013) Extent of roadway capacity shif resulting from midblock U-turn facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moayedi, Farzaneh (2013) Consumer behavior on energy efficient cooling devices - a case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moghadasi, Mostafa (2013) Nonlinear behaviour of beam-to-column connection in reinforced concrete industrialised building system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moghaddasi, Ali (2013) The effect of aging on asphalt mix. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Khalid, Ruzaini (2013) The effect of rubber dipping by-product on bitumen properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Omer, Joma Hamed (2013) Analytical and numerical modeling of flush end-plate connection system with built-up hybrid beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad, Shahrul Nizam (2013) Potential of solar farm development at UTM campus for generating green energy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Nashruddin, Siti Nurul Asma' (2013) Maintenance management of heritage building in Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Al-Akhbar (2013) Meshfree formulation of free vibration of composite beam with partial interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Zinatul 'Ashiqin (2013) Relationship of rutting and roughness and resilient modulus of flexible expressway pavements. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Roshdi, Farrah Rina (2013) Challenges of quality assessment system (QLASSIC) in construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Said, Elly Norissya (2013) 3D analysis on failure behaviour of deep mixing method for partially penetrated columns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sukarno, Ahmad Syazwan (2013) Design verification of driven piles in soft ground using maintain load test and high strain dynamic load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Syaifu, Mohd. Murad (2013) Properties of crushed recycled fine aggregate in concrete mixes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Tahir, Siti Fariza Mior (2013) Prediction model of underground corrosion on steel pipeline using in-situ parameters. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Molkaraie, Pouya (2013) Evaluation of bearing capacity due to radial expansion using expanding piles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moravveji, Mohammad Yousef (2013) Selection of the industrialized building material supplier by analytic hierarchy process method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Moravveji, Mohammad Yousef (2013) Selection of the industrilized building material supplier by analytic hierarchy process method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mostafapour, Saman (2013) Assessment of value management by using earn value technique in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Motamed, Samineh (2013) The implementation of Behavorial Based Safety (BBS) at construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad Nor Hafidzi Mahat (2013) Buckling analyses of triaxial weave fabric composites under thermal and mechanical loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawi, Nur Muizzah (2013) Implementation of noise management in construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nazar, Muhammad Salman (2013) Mechanical properties of sawdust concrete incorporating palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nazari, Payam (2013) Plastic analysis of steel frame with rigid and semi rigid connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nejat, Payam (2013) The simulation of comfort of residential apartment by computational fluid dynamics simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nekooie, Mohammad Ali (2013) Reliability and stability of amphibious house for floodplain areas in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nekooie, Mohammad Ali (2013) Stability and reliability of amphibious house for floodplain areas in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nezhad Bilandi, Arash Taghi (2013) Feasibility study of sustainability inclusion in construction planning process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngadiran, Zainudin (2013) Background losses reduction by excessive pressure cut off. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nurizan Ab. Rahman (2013) Practical approach for reduction of fuel consumption on earthwork highway machineries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Obaid, Hussein Abed (2013) Modelling soil erosion susceptibility of Johor river basin by using geographical information system(GIS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Olaniyan, Olusegun Mayowa (2013) Climate variability and changes in rainfall trends in the east coast of Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Olaniyan, Olusegun Mayowa (2013) Climate variability and changes in the rainfall trends in the east coast of Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Omar, Nurul Atiqah (2013) Floodplain modeling due to dam break using CCHE2D_FLOOD. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Nurul Aini (2013) Ergonomics management for the control of sprains and strains in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Farah Nadiah (2013) Road maintenance and rehabilitation in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Nur Syaheera (2013) Motivation and barrier factors of environmental management systems implementation in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Rebaz Abdulghafoor (2013) Finite element analysis of prestressed concrete box girder bridge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman Ali, Rawshan (2013) The study of watershed retention approach to identify water resources problems at Johor watershed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pamela, Adeline Lo (2013) The effects of tapered sleeve in improving the achorage bond of reinforcement bar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Payam Nazari (2013) Plastic analysis of steel frame with rigid and semi rigid connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Poor Sabet, Pejman Ghasemi (2013) Necessary competencies of construction managers in a developing country. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rahmat, Maziar Ghabel (2013) Analysis of industrialized building system block work with ETABS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rajabi, Masoud Dehkhoda (2013) Dynamic response prediction of steel frame structure considering semi-rigid connection by applying damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rakhshanifar, Mansooreh (2013) Health and safety in refurbishment projects involving demolition work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Izzul (2013) Effect of fine aggregate angularity on rutting resistance of asphalt concrete AC10. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rasin, Norhidayah (2013) Stability of triaxial weave fabric composites employing finite element model with homogenized constitutive relation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razavi, Masoud (2013) Performance of Kenaf fiber reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roushenas, Peiman (2013) Analysis of spill oil on TiO2 and magnetic PVA : alginate beads involving chemical degradation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sa'adon, Suhaili (2013) Procedure in negotiation amounts in construction project disputes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sabet, Pejman Ghasemi Poor (2013) Necesary competencies of construction managers in a developing country. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadeghi, Faraz (2013) Dynamic analyses of composite footbridges excited by pedestrian induced loads. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadeghifam, Aidin Nobahar (2013) Energy analysis and optimization of public building using building information modeling application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sadeq Aljadir, Ahmed Jader (2013) Hydrodynamic modeling of Tasik Titiwangsa. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sahat, Suhaila (2013) Soil erosion rates from different land cover intensities in oil palm plantation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sale, Magaji Ibrahim (2013) Construction of residential house a case study of public housing units in Gombe State, Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saleh Baras, Saleh Abdullah (2013) Influence of independent bent-up bars on the shear capacity of reinforced concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samadikouchaksaraei, Mostafa (2013) Performance of non-fired bricks from recycled waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sarlati, Sogol (2013) Acoustic quality for classrooms in Faculty of Civil Engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahrbijari, Kamyar Bagherinejad (2013) Finite element simulation of rectangular concrete-filled steel-hollow section beam-column structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shakibabarough, Azin (2013) Decision making by manager in contractor's organization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shoubi, Mojtaba Valinejad (2013) Building performance assessment in terms of energy consumption using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siew, Sik Nguong (2013) An evaluation of effectiveness of approximate quantity method in estimating construction cost. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sing, Annan Vessinuk (2013) Element of warranty of IBS structural system for construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siw, Woo Yiung (2013) Open building system towards functional sustainbility for an affordable housing in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sokhanvar, Majid (2013) Unsaturated shear strength behaviour under unconsolidated undrained tests. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Solaiman, Maher Hussain (2013) Assessment of water balance approach for different water supply conditions in Dahuk Dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sondossi, Soroush (2013) Dynamic response prediction of steel frame structure considering semi rigid connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soufeiani, Leila (2013) Dynamic behavior of fiber reinforced composite slab induced by human walking. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suhaimi, Muhammad Sharaffuddeen (2013) Nonlinear meshfree formulation of nonlinear geometric composite beam with slip. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suraji, Norlia Sofa (2013) Client perspective towards application of industrialised building system in private construction projetcs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suraji, Norlia Sofa (2013) Client perspective towards application of industrialised building system in private construction projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taghia, Pezhman (2013) Mechanical behavior of reinforced concrete short column-CFRP composite based on ABAQUS finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taha, Omar Abdulrazzaq (2013) Influence of diagonal reinforcement with spiral stirrps on shear capacity of coupling beam in shear wall. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taherkhani, Roohollah (2013) Development of a social sustainability model in industrial building system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Kah Ling (2013) Sustainable attributes in project feasibility study towards implementation of sustainable construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thanwa Filza Nashruddin (2013) The effect of time dependent on the absorption of asphaltic concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Thian, Xiao Yun (2013) Lipid production from POME using microalgae grown in hybrid photobioreactor (HPBR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tomiran, Nur Sabrina (2013) 3D analysis on failure behaviour of deep mixing method for fully penetrated columns. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tong, Khoon Hong (2013) Optimal sensor placement using improved simulated annealing algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Torkzadeh, Ali (2013) Effect of transverse rumble strips on traffic flow fundamental diagram. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tuan Soh, Tuan Nor Hazwani (2013) Storm water management criteria for Malaysia green highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tumin, Wardah Ajmal (2013) Accident prevention through management approach in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Umar Baki, Nazurah Zahidah (2013) Establishment of sustainable design criteria for Malaysian green highway index. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Vafaei, Mohammadreza (2013) Seismic damage identification based on integrated artificial neural networks and wavelet transforms. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Velian, Vrida Ingrid (2013) Evaluation of bond strength between hot mix asphalt and stone mastic asphalt surfacing layer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Velian, Vrida Ingrid (2013) Evaluation of bond strength between hot mix asphalt and stone mastic asphalt surfacing layers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wai, Soon Han (2013) A causal relationship framework for success factors and criteria of social infrastructure in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Cvil Engineering.

Wan Hassan, Wan Hanani (2013) Strategi meningkatkan penggunaan konkrit pratuang di Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hassan, Wan Nur Firdaus (2013) Finite element formulation of one-dimensional uncoupled and couple consolidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hassan, Wan Nur Firdaus (2013) Finite element formulation of one-dimensional uncoupled and coupled consolidation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yadollahi, Mohammadreza (2013) Budget allocation management model for seismic rehabilitation of infrastructure assets. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yao, Bigah (2013) Stormwater runoff quality control in green highway projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yap, Sie Horng (2013) Behaviour of unbonded reinforcement bar anchored in grouted spiral under increasing flexural bending. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Zarina (2013) Numerical simulation of bearing capacity for rigid footing on cohesive soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zadeh, Amin Fakhkhar (2013) Energy efficient residential buildings assessment using building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zadeh Takhti, Hesamaddin Kamal (2013) Technology acceptance model for nursing process in hospital information system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Wan Zahran (2013) Executive information system for monitoring building construction work progress. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Wan Zahran (2013) Executive information system for monitoring building construction work progress. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zaki, Nazir Huzairy (2013) Traffic impact assessment of new commercial developments in the neighborhoods of Skudai town. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulkifli, Assrul Reedza (2013) Issues and challenges in construction of roller compacted concrete dam in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.