Universiti Teknologi Malaysia Institutional Repository

Items where Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 349.

A

Abdul Wahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Mohd. Jaafar, Mohammad Nazri and Kareem, Zaid Sattar (2015) Experimental thermal field measurements of film cooling with twisted holes. International Review of Aerospace Engineering, 8 (3). pp. 86-94. ISSN 1973-7459

Abas, Mohd. Azman and Muhamad Said, M. F. and Zainal Abidin, Shaiful Fadzil and Zahari, Izzarief (2015) Simulation of fuel economy for Malaysian urban driving. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2306-2316. ISSN 2229-8649

Abbas, Muhammad Rabiu and Mohd. Noor, Alias and Rajoo, Srithar and Ahmad, Norhayati and Basheer, Uday M. and Md. Sah, Muhammad Hanafi (2015) Thermal conductivity and specific heat capacity of different compositions of Yttria stabilized zirconia-nickel mixtures. In: Advanced Materials Research, 2015.

Abd. Aziz, Nurul Hazirah (2015) System identification and control of the horizontal motion of a twin rotor multi-input multi-output system (TRMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Kader, Ab. Saman (2015) River restroration for inland waterways transportation system. In: The 1st International Conference on Maritime Development, 4-6 Sept, 2015, Indonesia.

Abd. Kader, Ab. Saman and Dalim, N. Hasnaa Kamilah and Kasypi, M. (2015) Classification of seaport: a review of container terminal. In: Malaysia Universities Transport Research Forum Conference, 24-25 Nov, 2015, Selangor, Malaysia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan (2015) Navigational safety model in port operation. In: The 2nd International Conference on Ocean Mechanical and Aerospace - Science & Engineering, 21 Okt, 2015, Indonesia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan (2015) Optimization of fuel consumption rate for tugboat in relation to port operations. In: The 1st International Conference on Maritime Development, 4-6 Sept, 2015, Indonesia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan and Wan Shamsuri, Wan Nurulhuda (2015) Design of lifeboat releasing system for ship board operation. In: The 2nd International Conference on Ocean Mechanical and Aerospace, 21-22 Okt, 2015, Indonesia.

Abdolahi, Ahmad (2015) Conductive polymer coatings towards inhibition of microbial-induced corrosion of low carbon steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Muhamad Said, Mohd. Farid and Mohd. Jamil, Hishammudin (2015) Single-cylinder 125 CC stepped piston engine for mobility and portable power generation applications. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Abdul Aziz, Azhar and Sumeru, Kasni and Muhamad Said, Mohd. Farid and Mohd. Perang, Mohd. Rozi and Nasution, Henry (2015) Single-cylinder 125 cc stepped piston engine for mobility and portable power generation applications. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Abdul Aziz, Roseni and James, Adeyemi Ademola and Abdul Kadir, Aini Zuhra and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2015) Effect of working posture on back pain occurrence among electronic workers in Malaysia. In: Procedia Manufacturing, 4-6 Feb, 2015, Indonesia.

Abdul Hassan, Shukur and Ismail, Yob Saed and Mohd. Sam, Abdul Rahman and Abu Hanan, Umar and Wahit, Mat Uzir (2015) Shear property of structural epoxy adhesive exposed to tropical weathering condition. Jurnal Teknologi, 77 (8). pp. 83-90. ISSN 0127-9696

Abdul Kadir, Aini Zuhra and Mohd. Rohani, Jafri and Arowolo, Matthew Oluwole (2015) Road safety outcome model among commercial bus. In: Advanced Materials Research, 4-6 Dec, 2015, Indonesia.

Abdul Rahim, Rabiatul Adibah and Fatihhi, Szali Januddi and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Syahrom, Ardiyansyah (2015) A narrative review of morphology of cancellous bone at different human anatomy- methods and parameters. In: Applied Mechanics and Materials, 2015.

Abdul Raman, Noor Azah and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Ani, Farid Nasir (2015) A review on the application of bio-oil as an additive for asphalt. Jurnal Teknologi, 72 (5). pp. 105-110. ISSN 0127-9696

Abdullah, Ahmad Ammar Luqman (2015) Cost estimation model of structural steel for superstructure of wellhead platform in oil and gas industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Arman Shah (2015) Influence of ultrasonic vibration on TiN coated biomedical TI-13Zr-13Nb alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Mohamed Ruslan and Prawoto, Yunan and Cantwell, Wesley James (2015) Interfacial fracture of the fibre-metal laminates based on fibre reinforced thermoplastics. Materials and Design, 66 . pp. 446-452. ISSN 0261-3069

Abdullah, Muhammad A'imullah and Arjmandi, Mohammad Reza and Koloor, Seyed Saeid Rahimian and King, Jye Wong and Tamin, Mohd. Nasir (2015) Interlaminar damage behavior of CFRP composite laminates under cyclic shear loading conditions. In: Advanced Materials Research, 4-6 Feb, 2015, Indonesia.

Abdullahi, Tijjani (2015) Adhesion of polymer coated steel wire by compression molding and extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdulridha, Mundher Fadhil and Jusoh, Muhamad Anuwar and Abu Bakar, Abd. Rahim and Abdullah, Mohamed Ruslan (2015) Reduction of drum brake squeal noise using constrained layer damping (CLD). In: 1st International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Abdulridha, Mundher Fadhil and Jusoh, Muhamad Anuwar and Abu Bakar, Abd. Rahim and Abdullah, Mohamed Ruslan (2015) Reduction of motorcycle's drum brake squeal noise using constrained layer damping (CLD). In: 1st ICRIL-International Conference on Innovation in Science and Technology (LICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

AbdulWahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Kareem, Zaid Sattar (2015) Investigation of effect holes twisted angle and compound angle of holes on film cooling effectiveness. International Review of Automatic Control, 8 (3). pp. 244-250. ISSN 1974-6059

AbdulWahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Kareem, Zaid Sattar (2015) Investigation of film cooling effectiveness enhancement by using corrugated spiral holes. International Review of Mechanical Engineering, 9 (4). pp. 360-367. ISSN 1970-8734

Abdussalam, Mamoon (2015) Mechanical properties of HFCVD microcrystaline diamond coated on seeded WC substrate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abed, Azher M. and Sopian, Kamarozzaman and Mohammed, Hussein A. and Alghoul, Mohamad Ahmed and Ruslan, Mohd. Hafidz and Mat, Sohif and Al-Shamani, Ali Najah (2015) Enhance heat transfer in the channel with V-shaped wavy lower plate using liquid nanofluids. Case Studies in Thermal Engineering, 5 . pp. 13-23. ISSN 2214-157X

Abioye, A. M. and Ani, Farid Nasir (2015) Recent development in the production of activated carbon electrodes from agricultural waste biomass for supercapacitors: a review. Renewable and Sustainable Energy Reviews, 52 . pp. 1282-1293. ISSN 1364-0321

Abioye, Adekunle Moshood and Ani, Farid Nasir (2015) The characteristics of oil palm shell biochar and activated carbon produce via microwave heating. In: Applied Mechanics and Materials, 2015.

Abu Bakar, Noorilyana (2015) An optimization of mixing process parameters for soy sauce production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, S. A. and Jamaluddin, H. and Roslan, A. R. and Samin, P. M. (2015) Sensitivity analysis on skyhook and semi active damping force algorithms in semi active suspension system. In: The 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015), 7-8 May, 2015, Langkawi, Malaysia.

Abu Bakar, Saiful Anuar and Muhammad Said, Mohd. Farid and Abdul Aziz, Azhar (2015) Ride comfort performance evaluations on electric vehicle conversion via simulations. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7794-7798. ISSN 1819-6608

Abubakar, Mu'Azu and Ahmad, Norhayati (2015) Comparison of three-parameter weibull statistical analysis of the flexural strength of denseband porous sintered clay. In: 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Bali, Indonesia.

Abubakar, Mu'Azu and Aliyu, Abubakar Baba and Ahmad, Norhayati (2015) Flexural strength analysis of dense and porous sintered clay using weibull probability distribution. In: Applied Mechanics and Materials, 2015.

Abubakar, Mu'Azu and Tamin, Mohd. Nasir and Ahmad, Norhayati (2015) A three parameter weibull of flexural strength variation of porous sintered clay. In: World Scientific and Engineering Academy and Society Conference, 27-29 June, 2015, Italy.

Abyn, Hassan and Rafiqul Islam, Mohammad and Jaswar, Koto and Mahmoudi, Amin and Siow, C. L. and Kader, A. S. A. (2015) Wave exciting forces of a free floating semi submersible in regular waves. Jurnal Teknologi, 74 (5). pp. 53-57. ISSN 0127-9696

Adeyemi, Ademola James and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2015) Interaction of body mass index and age in muscular activities among backpack carrying male schoolchildren. Work, 52 (3). pp. 677-686. ISSN 1051-9815

Adiputra, Mohamad Fariz (2015) Risk control enhancement using safety climate factors for HIRARC method in steel product industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afifah, A. N. and Syahrullail, Samion and Nor Azwadi, Che Sidik (2015) Natural convection of aluminium oxide-water nanofluid. Jurnal Teknologi, 75 (11). pp. 161-167. ISSN 2180-3722

Ahmad, Arshad (2015) A semicontinuous approach for heterogeneous azeotropic distillation processes. In: Conference.

Ahmad, Norhayati and Idris, Mohd. Hasbullah and Moslemi, Navid and Farahany, Saeed and Ghandvar, Hamidreza (2015) Evaluation of the effect of sicp ratio on microstructural and dry sliding wear behavior of a356/xsicp composites. In: 4th International Conference on Advanced Manufacturing Technology, 18-20 Dec, 2015, United States.

Ahmad, Shaharudin (2015) A first principle approach for the strength analysis of a semi-swath vessel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Zaini and Abdullah, Mohamed Ruslan Uslan and Tamin, Mohd. Nasir (2015) Experimental and numerical studies of fiber metal laminate (FML) thin-walled tubes under impact loading. Advanced Structured Materials, 70 . pp. 433-443. ISSN 1869-8433

Ahmad @Mohamad, Md. Fauzi and Md. Ariff, Mohd. Shoki and Mohamad Zakwan @ Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Syed Abdul Rahman, Syed Saleh and Raja Abdullah, Tengku Aziz and Fadzil, Nukman (2015) The effect of demographics on Quality Management Principles of ISO 9001:2008 amongst Malaysia Hajj Pilgrims. In: 4th ICTMBE-International Conference on Technolgoy Management,Business and Entrepreneur, 24-25 Nov, 2015, Melaka, Malaysia.

Ahmad Fuad, Ahmad Faizal (2015) Safety assessment model of coastal passenger vessel in the perspective of life jacket compatibility. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Shafie, Noor Emilia and Mohamed Kamar, Haslinda and Kamsah, Nazri (2015) CFD simulation of air temperature inside a bus passenger compartment. In: Applied Mechanics and Materials, 19-21 August, 2014, Switzerland.

Ahmad Shafie, Noor Emilia and Mohamed Kamar, Haslinda and Kamsah, Nazri (2015) Reducing indoor air contaminants inside a bus passenger compartment. International Journal of Mechanical and Mechatronics Engineering, 15 (3). pp. 81-87. ISSN 2227-2771

Ahmad Zainuri, Mohamad Ihsan and Abdul Latiff, Zulkarnain and Muhamad Said, Mohd. Farid and Abdul Aziz, Azhar and Mohd. Perang, Mohd. Rozi (2015) The effect of bio-based additives on engine performance and emissions of petrol and diesel engine. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Ahmed, Osamah Zaid and Ani, Farid Nasir (2015) Simulation of a double effect solar absorption system for traditional house in Yemen. In: Applied Mechanics And Materials, 2015.

Ahmed Kadhim Zarzoor, (2015) Defect detection in pipeline using acoustic emission. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aid, Siti Rahmah and Hamzah, Azura and Ambran, Sumiaty and Matsumoto, Satoru and Johari, Zaharah and Fuse, Genshu (2015) Effect of pulse number on dopant activation in silicon during shallow p+/n junction formation by non-melt excimer laser annealing. In: 2015 International Conference on Smart Material Research (ICSMR 2015), 21-22 Sep, 2015, Turkey.

Al-khafaji, Ali A. M. and Shaharuddin, Nik Mohd. Ridzuan and Mat Darus, Intan Zaurah (2015) Evolutionary algorithm for identification of a flexible single-link manipulator system. WSEAS Transactions on Systems and Control, 10 . pp. 58-75. ISSN 1991-8763

Al-Shamani, Ali Najah and Sopian, K. and Mohammed, Hussein A. and Mat, Sohif and Ruslan, Mohd. Hafidz and Abed, Azher M. (2015) Enhancement heat transfer characteristics in the channel with Trapezoidal rib-groove using nanofluids. Case Studies in Thermal Engineering, 5 . pp. 48-58. ISSN 2214-157X

Alawi, Omer A. and Che Sidik, Nor Azwadi (2015) The effect of temperature and particles concentration on the determination of thermo and physical properties of SWCNT-nanorefrigerant. International Communications In Heat And Mass Transfer, 67 . pp. 8-13. ISSN 7351-933

Alawi, Omer A. and Che Sidik, Nor Azwadi and Wah, Yen Tey (2015) A numerical study of heat transfer to turbulent separation nanofluid flow in an annular passage. Jurnal Teknologi, 77 (8). pp. 75-82. ISSN 2180–3722

Alexandrov, Sergei Evgenievich and Mustafa, Yusof (2015) Quasi-static axially symmetric viscoplastic flows near very rough walls. Applied Mathematical Modelling, 39 (15). pp. 4599-4606. ISSN 0307904X

Ali, Arifah and Maimun, Adi and Ahmed, Yasser M. and Rahimuddin, Rahimuddin (2015) Resistance prediction of innovative semi SWATH design concept in shallow water. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Ali, Arifah and Maimun, Adi and Ahmed, Yasser M. and Rahimuddin, Rahimuddin and A. Ghani, Mohamad Pauzi (2015) Experimental analysis on flow around fin assisted semi SWATH. Jurnal Teknologi, 74 (5). pp. 91-95. ISSN 2180-3722

Ali, Derakhshanasl (2015) Improved covariance matrix evolution strategy algorithm for stochastic dynamic unequal area facility layouts in an open area. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Rosmah and Haron, Habibah Norehan and Salim, Kamilah Radin and Abdullah, Morina and Mohamed, Zainai (2015) Challenges in implementing engineering technology education in Malaysia. In: The 2nd International Conference on Human Capital and Knowledge Management 2015, 11-13 Feb, 2015, Bandung, Indonesia.

Ali A., Header (2015) Experimental study of acoustic emission technique for concrete defect detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alipour, R. and Farokhi Nejad, Ali and Izman, S. (2015) The reliability of finite element analysis results of the low impact test in predicting the energy absorption performance of thin-walled structures. Journal of Mechanical Science and Technology, 29 (5). pp. 2035-2045. ISSN 1738-494X

Almasi, Davood (2015) Deposition of the hydroxyapatite particles on the polyether ether ketone surface for orthopaedic applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Almasi, Davood and Izman, Sudin and Sadeghi, Morteza and Iqbal, Nida and Roozbahani, Fatemeh and Krishnamurithy, Genasan and Kamarul, T. and Abdul Kadir, Mohammed Rafiq (2015) In vitro evaluation of bioactivity of chemically deposited hydroxyapatite on polyether ether ketone. International Journal of Biomaterials, 2015 . ISSN 1687-8787

Amin, Z. and Mohammad, R. and Abdul Aziz, S. and Othman, N. (2015) Workers’ safety awareness level on hand related injury accident in metal fabrication industry. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Amin, Zamree and Mohammad, Roslina and Abdul Aziz, Sa'ardin (2015) Hand related injury accident trend in metal fabrication industry. In: 4th International Conference on Engineering Business Management, 22-23 August, 2015, Kuala Lumpur, Malaysia.

Amran, Nur Aireen (2015) Integrated system of automatic identification system (AIS) and radar fot port traffic management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Anah, Syafwan (2015) Vessel traffic simulation at container port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkanai and Ghanaati, Ali (2015) Influence of hot burned gas utilization on the exhaust emission characteristics of a controlled auto-ignition two-stroke cycle engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2396-2404. ISSN 2229-8649

Ani, Farid Nasir and Mat Junoh, Muhammad and Ab. Muis, Zarina (2015) Granular-activated carbon from Mukah coal using carbon dioxide activation. Jurnal Teknologi, 75 (11). pp. 123-127. ISSN 2180-3722

Anjomshoae, Ali and Hassan, Adnan and Samuel, Cherian and Wong, Kuan Yew (2015) Effect of information sharing and capacity adjustment on healthcare service supply chain: the case of flood disaster. In: Malaysian Research Conference and Innovation Exhibition (MRCIE) 2015, 2-3 Dec, 2015, Johor Bahru, Johor.

Anuar, Abdul Rahim Shar and Muhamad Said, Mohd. Farid and Abdul Aziz, Azhar and Lazim, Zulfaqih (2015) Investigation into the selection of an appropriate piston head geometry for a spark ignition engine equipped direct-fuel injector. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Aparow, Vimal Rau and Hudha, Khisbullah and Ahmad, Fauzi and Jamaluddin, Hishamuddin (2015) Modeling and validation of electronic wedge brake mechanism for vehicle safety system. Jurnal Teknologi, 75 (1). pp. 183-191. ISSN 2180-3722

Arman Alias, (2015) Improved design solution for motion resistance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ashokkumar, Veeramuthu and Salam, Zainal and Sathishkumar, Palanivel and Hadibarata, Tony and Mohd. Yusoff, Abdull Rahim and Ani, Farid Nasir (2015) Exploration of fast growing botryococcus sudeticus for upstream and downstream process in sustainable biofuels production. Journal of Cleaner Production, 92 . pp. 162-167. ISSN 0959-6526

Asl, Ali Derakhshan and Wong, Kuan Yew (2015) Solving unequal area static facility layout problems by using a modified genetic algorithm. In: Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, 15-17 Jun, 2015, New Zealand.

Asral, Asral (2015) High amplitude wave liner effects on journal bearing performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aung, Lwin Moe and Mohamad Sapawi, Siti Aminah and Abu, Aminudin (2015) Mechanical behavior of hybrid jute/flax epoxy composite. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hong Kong.

Aziz, Amir and Mamat, Rizalman and Wan Ali, Wan Khairuddin and Mohd. Perang, Mohd. Rozi (2015) Review on typical ingredients for ammonium perchlorate based solid propellant. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6188-6191. ISSN 1819-6608

Azman, Nurul Farhanah and Samion, Syahrullail and Sapawe, Norzahir (2015) Tribological performance of raw and chemically modified RBD palm kernel. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Pulau Pinang, Malaysia.

Aznam, Siti Nur Amalina (2015) Combustion visualization and measurement in a closed vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aznam, Siti Nur Amalina and Saat, Aminuddin (2015) Pressure rise generation by the combustion of methane-air in a closed vessel. In: Malaysian Technical Universities Conference on Engineering and Technology 2015, 11-13 Oct 2015, Johor Bahru, Malaysia.

B

Bagaber, Salem Salah Abdullah (2015) Preliminary study on bricks drying process using microwave technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagheri, Arash (2015) Real coded GA for tuning of semi-active railway vehicle suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Abdul Kadir, Mohammed Rafiq and Saud, Safaa Najah and Kasiri-Asgarani, Masoud (2015) The Mechanical Properties and Corrosion Behavior of Double-Layered Nano Hydroxyapatite-Polymer Coating on Mg-Ca Alloy. Journal Of Materials Engineering And Performance, 24 (10). pp. 4010-4021. ISSN 1059-9495

Bakhtiarinejad, Marjan (2015) Numerical study on the influence of various nanofluids on the efficiency of flat-plate solar collectors (FPSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Baloch, Abdul Hameed (2015) Effect of different machining parameters on surface roughness of aluminum alloys based on Si and Mg content. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bundu, Alimamy and Mat, Shabudin and Ishak, I. S. (2015) Effect of control surface and reynolds number on flow separation of generic light aircraft. In: The 2nd International Conference on Ocean Mechanical and Aerospace - Science & Engineering, 21 Oct, 2015, Indonesia.

C

Che Kob, Mohd. Salman and Supriyo, Bambang and Tawi, Kamarul Baharin and Mazali, Izhari Izmi (2015) Engagement slip controller development based on actuator displacement for an electro-mechanical friction clutch system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2664-2674. ISSN 2229-8649

Che Sidik, Nor Azwadi and Mohd. Yazid, Muhammad Noor Afiq Witri and Mamat, Rizalman (2015) A review on the application of nanofluids in vehicle engine cooling system. International Communications in Heat and Mass Transfer, 68 . pp. 85-90. ISSN 0735-1933

Che Sidik, Nor Azwadi and Yassin, M. M. and Musa, Mutah N. (2015) Turbulent-forced convective heat transfer and pressure drop analysis of FE3O4 magnetic nanofluid in a circular microchannel. Jurnal Teknologi, 75 (11). pp. 11-15. ISSN 0127-9696

Chegeni, Ali (2015) A system dynamic model for decision support system in lean construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chofreh, Abdoulmohammad Gholamzadeh (2015) A master plan for the implementation of sustainable enterprise resource planning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Shaharoun, Awaluddin Mohamed and Ismail, Syuhaida (2015) A review on sustainability transformation roadmaps using project management methodology. Advanced Science Letters, 21 (2). pp. 133-136. ISSN 1936-6612

Chong, Chengtung and Hochgreb, Simone (2015) Spray and combustion characteristics of biodiesel: non-reacting and reacting. International Biodeterioration and Biodegradation, 102 (1). pp. 353-360. ISSN 0964-8305

Chua, Yong Ping (2015) Optimization of laser cutting parameter of acrylic by using DMAIC approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

D

Dahalan, Md. Nizam and Mansor, Shuhaimi and Ali, Muhammad Muzakkir Faiz (2015) Study the orifice effects of a synthetic jet actuator design. Jurnal Teknologi, 77 (8). pp. 99-105. ISSN 0127-9696

Dambatta, M. S. and Murni, N. S. and Sudin, Izman and Kurniawan, Denni and Froemming, Gabriele R. A. and Hermawan, Hendra (2015) In vitro degradation and cell viability assessment of Zn-3Mg alloy for biodegradable bone implants. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (5). pp. 335-342. ISSN 0954-4119

Dambatta, M. S. and Sudin, Izman and Kurniawan, Denni and Saeed, Farahany and Yahaya, Bashir and Hermawan, Hendra (2015) Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn-3Mg alloy as potential biodegradable implant material. Materials and Design, 85 . pp. 431-437. ISSN 0264-1275

Dambatta, Murtala Sule (2015) Influence of heat treatment and severe plastic deformation (SPD) ON Zn-3Mg alloy properties for bio-implant application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Darlis, Nofrizalidris and Shafii, Nadia Shaira and Dillon, Jeswant and Osman, Kahar and Md. Khudzari, Ahmad Zahran (2015) Novel straight type aortic cannula with spiral flow inducing design. In: Applied Mechanics and Materials, 2015.

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza (2015) Fabrication and properties of triplex NiCrAlY/nano Al2O3 center dot 13%TiO2/nano TiO2 coatings on a magnesium alloy by atmospheric plasma spraying method. Journal of Alloys and Compounds, 645 . pp. 450-456. ISSN 0925-8388

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Adabi, Mohsen and Hamzah, Esah and Kamali, Hussein Ali (2015) Improvement of corrosion resistance of binary Mg-Ca alloys using duplex aluminum-chromium coatings. Journal of Materials Engineering and Performance, 27 (7). pp. 2614-2627. ISSN 1059-9495

Dawood, H. K. and Mohammed, Hussein A. and Che Sidik, Nor Azwadi and Munisamy, Kannan M. and Abdul Wahid, Mazlan (2015) Forced, natural and mixed-convection heat transfer and fluid flow in annulus: a review. International Communications in Heat and Mass Transfer, 62 . pp. 45-57. ISSN 0735-1933

Dawood, Hasan I. and Mohammed, Kahtan S. and Rahmat, Azmi and Uday, M. B. (2015) The influence of the surface roughness on the microstructures and mechanical properties of 6061 aluminium alloy using friction stir welding. Surface And Coatings Technology, 270 . pp. 272-283. ISSN 2578-972

E

Efkirn, Esam Abubaker and Mat Lazim, Tholudin and Wan Omar, W. Z. and Nik Mohd., N. A. R. and Takeyeldein, M. M. (2015) Aerodynamic analysis of horizontal axis wind turbine using blade element momentum theory for low wind speed conditions. In: The 2nd Conference on Ocean, Mechanical and Aerospace -Science and Engineering, 21-22 Oct, 2015, Indonesia.

Elbatran, A. H. and Abdel Hamed, Mohamed Walid and Yaakob, Omar and Abdel Razak, Yasser Mohamed Ahmed and Ismail, M. Arif (2015) Hydro power and turbine systems reviews. Jurnal Teknologi, 74 (5). pp. 83-90. ISSN 2180-3722

Elsherbeiny, Mohamed Mohamed Takeyeldein (2015) Analysis of low wind speed small hawt using blade element momentum theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

F

Fadil, N. A. and Yusof, S. Z. and Abu Bakar, T. A. and Ourdjini, A. (2015) Tin whiskers behaviour on immersion tin surface finish at high temperature and humidity condition. In: Proceeding of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Fadil, Nor Akmal (2015) Review: nickel base nanoparticles as new nanoparticulate of non-precious metal for future application. In: Asian Conference on Engineering and Natural Sciences (ACENS2015), 3-5 Feb, 2015, Tokyo.

Fadil, Nor Akmal and Mior Shahidin, Shazatul Akmaliah (2015) Effect of hydrofluoric acid etching on electroless copper plating on silicon wafer. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 Sept, 2015, Johor Bahru, Johor.

Fadil, Nor Akmal and Yusof, Siti Zahira and A. B. Kahar, Mohamad Nawawi and Abu Bakar, TutyAsma (2015) Effect of external stresses by bending on Sn whiskers formation and growth on immersion Sn surface finish. In: The World Virtual Conference on Applied Sciences and Engineering Applications, 27-29 March, 2015, Johor Bahru, Malaysia.

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Idris, Ani and Mohd. Yusof, Noordin (2015) A review of: application of synthetic scaffold in tissue engineering heart valves. Materials Science and Engineering C, 48 . pp. 556-565. ISSN 0928-4931

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Mohd. Yusof, Noordin and Idris, Ani (2015) Fabrication (ferrofluid/polyvinyl alcohol) magnetic nanofibers via co-axial electrospinning. Journal of Dispersion Science and Technology, 36 (1). pp. 28-31. ISSN 0193-2691

Fang, Wiliam Woei Chong and Ng, Jo-Han (2015) Biodiesel lubricity: an atomic-scale frictional characterisation approach. In: International Conference in Challenges in Environmental Science & Engineering (CESE) 2015, 28 Sept-2 Oct, 2015, Australia.

Farahany, Saeed and Idris, Mohd. Hasbullah and Ourdjini, Ali and Faris, Fadi and Ghandvar, Hamidreza (2015) Evaluation of the effect of grain refiners on the solidification characteristics of an Sr-modified ADC12 die-casting alloy by cooling curve thermal analysis. Journal of Thermal Analysis and Calorimetry, 119 (3). pp. 1593-1601. ISSN 1388-6150

Farhanah, A. N. and Samion, Syahrullail and Musa, Md. Nor and Bahak, M. Z. (2015) Modification of RBD palm kernel and RBD palm stearin oil with ZDDP additive addition. Jurnal Teknologi, 74 (10). pp. 125-126. ISSN 2180-3722

Fatemeh Nasrollahpourniazi, (2015) An optimization model for blocks allocation to service vessels in a port container terminl. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fatihhi, S. J. and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Abdullah, Jaafar and Kamarul, T. and Öchsner, Andreas and Syahrom, Ardiyansyah (2015) Uniaxial and multiaxial fatigue life prediction of the trabecular bone based on physiological loading: a comparative study. Annals of Biomedical Engineering, 43 (10). pp. 2487-2502. ISSN 0090-6964

Fatimah Mohammed Kadhim, (2015) Creep characteristics of austenitic stainless steel foils under oxidative and non-oxidative environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Fitriadhy, Ahmad and Yasukawa, H. and Abdul Malik, Adi Maimun (2015) Theoretical and experimental analysis of a slack towline motion on tug-towed ship during turning. Ocean Engineering, 99 . pp. 95-106. ISSN 2784-343

Foo, Jin Hoe and Noor Azizy, Noor Amira Syahida and Redzuan, Norizah and Zakaria, Khidzir (2015) Wettability effect and performance of nano-columnar DLC Coating via advancing sessile drop method in an ambient environmnet. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

G

Ghanaati, Ali and Mat Darus, Intan Zaurah and Muhammad Said, Mohd. Farid and Andwari, Amin Mahmoudzadeh (2015) A mean value model for estimation of laminar and turbulent flame speed in spark-ignition engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2224-2234. ISSN 2229-8649

Ghandvar, Hamidreza and Farahany, Saeed and Idris, Jamaliah (2015) Wettability enhancement of SiCp in cast A356/SiCp composite using semisolid process. Materials and Manufacturing Processes, 30 (12). pp. 1442-1449. ISSN 1042-6914

Gholami, Hamed and Mat Saman, Muhammad Zameri and Sharif, Safian and Mohd. Zakwa @ Zakuan, Norhayati (2015) A CRM strategic leadership towards sustainable development in student relationship management: SD in higher education. In: Procedia Manufacturing, 4-6 Feb, 2015, Indonesia.

Gohari, Soheil and Sharifi, Shokrollah and Vrcelj, Zora and Yahya, Mohd. Yazid (2015) First-ply failure prediction of an unsymmetrical laminated ellipsoidal woven GFRP composite shell with incorporated surface-bounded sensors and internally pressurized. Composites Part B: Engineering, 77 . pp. 502-518. ISSN 1359-8368

H

Hasan, Mohd. Faizal and Abdul Latiff, Zulkarnain and Mohd. Iskandar, Muhammad Amin (2015) Physical characteristics of pulverized EFB briquettes produced under various heating temperatures. In: 8th International Meeting on Advances in Thermofluids, 11-12 Nov 2015, Indonesia.

Hadi, A. W. A. and Kadir, M. R. A. and Harun, M. N. and Syahrom, A. (2015) The influence of peg designs on glenoid component: a finite element study. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Penang, Malaysia.

Hadji, Saif Eddine and Kazi, Suhail and Tang, Howe Hing and Mohamed Ali, Mohamed Sultan (2015) A review: Simultaneous localization and mapping algorithms. Jurnal Teknologi, 73 (2). pp. 25-29. ISSN 0127-9696

Hadji, Saif Eddine and Tang, Howe Hing and Khattak, Muhammad Adil and Mohamed Ali, Mohamed Sultan and Kazi, Suhail (2015) 2D feature extraction in sensor coordinates for laser range finder. In: 15th International Conference on. Robotics, Control and Manufacturing Technology (ROCOM '15), 23-25 April, 2015, Kuala Lumpur, Malaysia.

Hamidi, Ehsan and Fazeli, Alireza and Mat Yajid, Muhamad Azizi and Che Sidik, Nor Azwadi (2015) Materials selection for hip prosthesis by the method of weighted properties. Jurnal Teknologi, 75 (11). pp. 1-9. ISSN 2180-3722

Haron, Surhan Jamil (2015) Analysis of marine incidents in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasbullah, Nurul Ai'Zzah (2015) Effect of heat treatment on the microstructures and corrosion behaviour of quaternary mg-2.2zn-3.7re-0.5ca alloys for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Azlina N. and Yaakob, O. B. and Koh, Khoking and Ismail, Nasrudin and Ahmed, Yasser Mohamed (2015) Review of micro-bubble ship resistance reduction methods and the mechanisms that affect the skin friction on drag reduction from 1999 to 2015. Jurnal Teknologi, 74 (5). pp. 105-114. ISSN 0127-9696

Hashim, Jasmi and Ahmad, Norhayati and Nakamura, Yuzo and Md. Salmin, Fakhrullah and Abubakar, Mu'Azu and Mohd. Noor, Siti Fawziah and Mohd. Zaidan, Nurhanna (2015) Clay based ceramic membrane for heavy metal removal from effluent lake water. In: 13th Global Conference on Sustainable Manufacturing, 16-18 Sept, 2015, Vietnam.

Hassan, Mas Ayu (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hor, Win Han (2015) Neuro-network modelling and control of flexibly mounted cylindrical riser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyed Ehsan and A. Wahid, Mazlan (2015) Utilization of biogas released from palm oil mill effluent for power generation using self-preheated reactor. Energy Conversion and Management, 105 . pp. 957-966. ISSN 0196-8904

Hosseini, Seyed Ehsan and Mazlan, Abdul Wahid and Jamil, Muhammad Mahmud and Mohd. Azli, Anis Athirah and Misbah, Mohamad F. (2015) A review on biomass-based hydrogen production for renewable energy supply. International Journal of Energy Research, 39 (12). pp. 1597-1615. ISSN 0363-907X

Hourmand, Mehdi and Farahany, Saeed and Sarhan, Ahmed A. D. and Noordin, Mohd. Yusof (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR-RSM approach. International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768

Husain, Arastu Sajjad (2015) LNG/Dual fuel powered fishing boats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

I

Ibrahim, Mohammad Izazi (2015) Evaluation of various milling strategies in supporting advanced CAD/CAM environment for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mustafa K. and Idris, Jamaliah (2015) Influence of milling time on growth morphology and mechanical properties of aluminum-silicon-carbide composites. Jurnal Teknologi, 76 (1). pp. 201-205. ISSN 2180–3722

Ibrahim, Mustafa Khaleel and Idris, Jamaliah (2015) Microstructure and mechanical properties of aluminum-silicon carbide composite fabricated by powder metallurgy. In: 3rd International Science Postgraduate Conference, 24-26 Feb,2015, Johor Bahru, Johor.

Ibrahim, Thamer Rashid (2015) Experimental study of heat transfer in asphalt solar collector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohamad Shaiful Ashrul (2015) Hasil pembakaran emisi rendah dengan menggunakan bahan api biodiesel berbantukan aliran berpusar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri and Wan Omar, Wan Zaidi (2015) Numerical analysis of effect of preheat and swirl of inlet air on temperature profile in canister burner. Jurnal Teknologi, 72 (4). pp. 27-34. ISSN 2180-3722

Ismail, Muhammad Izzal and Costall, Aaron W. and Martines-Botas, Ricardo and Rajoo, Srithar (2015) Turbocharger matching method for reducing residual concentration in a turbocharged gasoline engine. SAE Technical Papers, 2015 . ISSN 0148-7191

Ismail, Norasyikin and Ani, Farid Nasir (2015) A review on plasma treatment for the processing of solid waste. Jurnal Teknologi, 75 (2). pp. 41-49. ISSN 0127-9696

Ismail, Norasyikin and Ani, Farid Nasir (2015) Syngas production from microwave gasification of oil palm biochars. In: Applied Mechanics And Materials, 2015.

J

Jaafar, Fatimah Amirah (2015) Resistance reduction through air layer formation beneath a vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jamehshooran, Bijan Ganji and Shaharoun, Awaluddin Mohamed and Haron, Habibah Norehan (2015) The moderating effect of web service on the relationship between business analytics and supply chain performance. Journal Of Theoretical And Applied Information Technology, 76 (1). pp. 97-108. ISSN 1992-8645

Javan, Saeed and Ahmadi, Pouria and Mansoubi, Hadi and Mohd. Jaafar, Mohammad Nazri (2015) Exergoeconomic based optimization of a gas fired steam power plant using genetic algorithm. Heat Transfer - Asian Research, 44 (6). pp. 533-551. ISSN 1099-2871

Jehad, Dhafir Giyath (2015) Numerical investigation of turbulent nanofluid flow effect on enhancing heat transfer in straight channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

K

Kadir, Z. A. and Mohammad, R. and Othman, N. (2015) Low back pain problem amongst port crane operator. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Kadir, Z. A. and Mohammad, R. and Othman, N. (2015) Six sigma approach in safety performance at transport logistics industry. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Kamsah, Nazri and Mohamed Kamar, Haslinda and Sumeru, Kasni and Sutandi, Tandi (2015) Experimental study on a cold storage system with a variable speed compressor. In: The 8th International Meeting on Advances in Thermofluids (IMAT2015), 11-12 Nov, 2015, Indonesia.

Kareem, Zaid Sattar and Abdullah, Shahrir and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Nazri and Abdul Wahid, Ammar F. (2015) Heat transfer enhancement in three-start spirally corrugated tube: experimental and numerical study. Chemical Engineering Science, 134 . pp. 746-757. ISSN 0009-2509

Kareem, Zaid Sattar and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and Abdul Wahid, Ammar F. (2015) Heat transfer enhancement in two-start spirally corrugated tube. Alexandria Engineering Journal, 54 (3). pp. 415-422. ISSN 1110-0168

Kareem, Zaid Sattar and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and AbdulWahid, Ammar Fakhir (2015) Heat transfer enhancement comparisons in different tube shapes. International Review on Modelling and Simulations, 8 (2). pp. 232-238. ISSN 1974-9821

Kasava, Nithia Kuar and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2015) Low carbon emissions review in aviation engine technology for Asean airspace: a proposal. In: International Conference of Low Carbon Asia (ICLCA 2015), 11-12 Okt, 2015, Johor Bahru, Johor.

Kasava, Nithia Kumar and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2015) Qualitative theory building method for lean sustainable framework development: a methodology. In: 4Th International Conference on Advanced Manufacturing Technology, 20-22 Sept, 2015, Johor Bahru, Johor.

Kasypi, M. and Abd. Kader, Ab. Saman and Amir, W. M. and Shah, M. Z. and Zailani, A. and Raqib, A. G. and Harom, N. M. A. and S., R. Chan (2015) Window analysis: a container terminal. In: International Conference on Integrated and Sustainable Transportaion, 15-17 Dec, 2015, Melaka, Malaysia.

Khalajabadi, Shahrouz Zamani and Abdul Kadir, Mohammed Rafiq and Izman, Sudin and Mohd. Yusop, Mohd. Zamri (2015) Facile fabrication of hydrophobic surfaces on mechanically alloyed-Mg/HA/TiO2/MgO bionanocomposites. Applied Surface Science, 324 . pp. 380-392. ISSN 0169-4332

Khaleghi, Mostafa (2015) Experimental and computational thermal analysis of vortex flame in meso-scale combustor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2015) Investigations of asymmetric non-premixed meso-scale vortex combustion. Applied Thermal Engineering, 81 . pp. 140-153. ISSN 1359-4311

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Wahid, Mazlan A. (2015) Experimental and numerical investigations of biogas vortex combustion. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (6). pp. 662-676. ISSN 0957-6509

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Wahid, Mazlan A. (2015) Vortex combustion and heat transfer in meso-scale with thermal recuperation. International Communications in Heat and Mass Transfer, 66 . pp. 250-258. ISSN 0735-1933

Kianpour, Ehsan and C. S., Nor Azwadi and Mohammad Hussein, Razavi and M., Akbari and Masoud, Afrand and Golshokouh, Iman (2015) Thermodynamic analyzes of film cooling for a restructured cooling holes at the end of gas turbine engine combustor. International Journal of Mechanics, 9 . pp. 11-15. ISSN 1996-3599

King, Jye Wong and Israr, Haris Ahmad and Tamin, Mohd. Nasir (2015) Characterisation of moisture absorption effects on the strength of composite materials. In: Advanced Materials Research, 2015.

Koh, Kho King and Yaakob, O. B. and E., Azreen and K., Nurhaslinda (2015) The study of ducted propeller in propulsion performance of a Malaysia fishing boat. Jurnal Teknologi, 74 (5). pp. 39-43. ISSN 0127-9696

Koh, Khoking and H. M. Ibrahim, Mohamad Izhan and Kader, A. S. A. and Agoes, Priyanto and Rahimuddin, Rahimuddin and Arib, M. N. and Zan, U. I. and Lok, K. B. and Wira, Jazair Yahya and Mohd. Noor, Alias and Abdul Pauzi, Mohamad Pauzi and Abdul Malik, Adi Maimun (2015) Super yatch design study for Malaysian sea (Langkawi Island). Jurnal Teknologi, 74 (5). pp. 33-37. ISSN 0127-9696

Kurniawan, Denni and Kim, Byungsun and Lee, Hoyong and Lim, Joongyeon (2015) Towards improving mechanical properties of basalt fiber/polylactic acid composites by fiber surface treatments. Composite Interfaces, 22 (7). pp. 553-562. ISSN 0927-6440

L

Lazim, Zulfaqih (2015) Ultimate strength analysis of ships plate due to corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Cheng Sheng and Wong, Kuan Yew (2015) Knowledge management performance measurement in micro-, small-, and medium-sized enterprises: an exploratory study. Business Information Review, 32 (4). pp. 204-211. ISSN 0266-3821

Liew, Kimfa and Mohd. Ghazali, Normah (2015) Simulation of flow and temperature development in a thermoacoustic resonator. International Journal of Technology, 6 (4). pp. 573-583. ISSN 2086-9614

Lim, Choong Heng and Al-Amin, Abul Quasem and Saidur, Rahman and Ward, Thomas Arthur (2015) Renewable energy choice: cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress and Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442

M

Mohammad, R. and Sharifi, F. and Sharifi, D. and Othman, N. and Kadir, Z. A. (2015) Targeting method of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Mohammad, R. and Sharifi, F. and Sharifi, D. and Othman, Norazli and Kadir, Z. A. (2015) Design of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Mohammad, R. and Sharifi, F. and Sharifi, D. and Othman, N. and Kadir, Z. A. (2015) Optimization of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Mahamad, Firdaus and Koto, Jaswar and Ishak, Iskandar Shah and Ammoo, Mohd. Shariff (2015) Performance characteristics of generic bell 206b helicopter tail rotor blade using empirical numerical method. In: The 2nd International Conference on Ocean, Mechanical and Aerospace., 21-22 Oct, 2015, Indonesia.

Mahdi, Raed Abed and Mohammed, Hussein A. and Munisamy, Kannan M. and Saeid, Nawaf H. (2015) Experimental and numerical investigation of combined convection heat transfer and fluid flow around circular cylinder through rectangular and trapezoidal open-cell aluminum foams. Chemical Engineering Communications, 202 (5). pp. 674-693. ISSN 0098-6445

Mahdi, Raed Abed and Mohammed, Hussein A. and Munisamy, Kannan M. and Saeid, Nawaf H. (2015) Review of convection heat transfer and fluid flow in porous media with nanofluid. Renewable and Sustainable Energy Reviews, 41 . pp. 715-734. ISSN 1364-0321

Mahmood, Salwa and Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin (2015) Graphical user interface for assessing sustainability by using fuzzy logic: a case study on hollow fiber membrane module. Jurnal Teknologi, 76 (1). pp. 207-220. ISSN 2180-3722

Mak, Kam Wong (2015) Study of micro pits on billet experimental surface in extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Makhtar, Nooraini (2015) Hybrid intelligent system for demand forecasting in die-casting industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mamat, Aman M. I. and Martines-Botas, Ricardo and Rajoo, S. and Romagnoli, Alessandro and Petrovic, Simon (2015) Waste heat recovery using a novel high performance low pressure turbine for electric turbocompounding in downsized gasoline engines: experimental and computational analysis. Energy, 90 . pp. 218-234. ISSN 0360-5442

Mansor, Shuhaimi and Boo, Koon Yan and Abdul Latif, Ainullotfi (2015) Aerodynamic damping and stiffness determination for aircraft wing flutter speed analysis. In: 33rd AIAA Applied Aerodynamics Conference, 22-26 June, 2015, USA.

Mas’Ood, Najlaa Nazihah (2015) Model development of estimating oil discharge for sustainable green port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Dzahir, M. Azwarie and Hussein, Mohamed and Supriyo, Bambang and Tawi, Kamarul Baharin and Yaakob, Mohd. Shafiek and Mat Dzahir, M. Azuwan and Mohamad, Maziah (2015) Optimal tuning of a PID controller for EMDAP-CVT using particle swarm optimization. Jurnal Teknologi, 75 (11). pp. 135-141. ISSN 2180-3722

Mat Ghani, M. F. and Mohd. Taib, Jamal and Dzakaria, Afandi (2015) Feasibility study on the implementation of Cubic Motion curve for vehicle trajectory planning. Advances in Mechanical Engineering, 7 (1). ISSN 1687-8132

Mat Kiah, Missjuliana (2015) Six sigma for scrap cost reduction in remanufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin and Mahmood, Salwa (2015) Sustainability of product life cycle: a case study of hollow fiber membrane. In: International Conference of Low Carbon Asia (ICICA 2015), 11-13 Oct, 2015, Johor Bahru, Johor.

Mat Saman, Muhamad Zameri and Mohmad Zakwan @ Zakuan, Norhayati and Sharif, Safiah and Gholami, Hamed (2015) Strategic leadership towards strategic leadership towards sustainable development in higher education using the developed interpretive structural modelling. In: Global Cleaner Production and Sustainable Consumption Conference, 1-4 Nov, 2015, Spain.

Mataram, Agung and Ismail, Ahmad Fauzi and Yuliwati, Erna and Matsuura, T. and Zamheri, A. and Rizal, S. (2015) Water treatment perfomance: application of electrospun nanofibers. Jurnal Teknologi, 77 (1). pp. 263-267. ISSN 0127-9696

Md. Nordin, Nik Abdul Hadi and Racha, Surya Murali and Matsuura, Takeshi and Misdan, Nurasyikin and Abdullah Sani, Nur Aimie and Ismail, Ahmad Fauzi and Mustafa, Azeman (2015) Facile modification of ZIF-8 mixed matrix membrane for CO2/CH4 separation: synthesis and preparation. RSC Advances, 5 (4). pp. 43110-43120. ISSN 2046-2069

Md. Razak, D. and Syahrullail, Samion and Sapawe, Norzahir and Yahya, Azli and Nuraliza, N. (2015) A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: improving tribology in metal-on-metal contact. Tribology Transactions, 58 (3). pp. 511-517. ISSN 1040-2004

Md. Salleh, Mohammad Annuar (2015) Maintenance management assessment in a local manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Merapan, Kirubaharan (2015) Glycerine pitch from glycerine concentration process as alternative fuel for boiler operations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mesbah, Rashid (2015) Software dynamic pricing by an optimization deterministic model with presence of piracy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Ikhwan Kori, (2015) Hemodynamic effect of Patent Ductus Asteriosus (PDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Shafie, Nur Adila and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain and Rajoo, Srithar (2015) Discharge and flow coefficient analysis in internal combustion engine using computational fluid dynamics simulation. In: International Conference on Computational Fluid Dynamics in Research & Industry 2015, 17-19 Aug, 2015, Kuala Lumpur, Malaysia.

Mohamed, Mohd. Firdaus (2015) System identification and intelligent control of automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Norirda and Mat Saman, Muhamad Zameri and Sharif, Safian (2015) Quality assurance of remanufactured components of end-of-life vehicle: a literature review. In: 2015 Advancement on Mechanical and Manufacturing Technology, 24-26 Nov, 2015, Indonesia.

Mohamed Bazin, Maisarah and Abubakar, Mu'Azu and Ahmad, Norhayati (2015) A comparative study of porous support from Sayong and Kankara clay. In: 3rd International Conference on Water Resources (ICWR 2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Mohamed Kamar, Haslinda and Kamsah, Nazri and Sumeru, Kasni and Muhammad Idrus, Alhamid (2015) Effect of regeneration air temperature on the performances of a desiccant wheel. In: The 8th International Meeting on Advances in Thermofluids (IMAT) 2015, 11-12 Nov, 2015, Indonesia.

Mohamed Soid, Shahril Nizam and Amir, Syed Ahmad and Ismail, M. A. and Hamid, Muhammad Najib and Mohd. Amzari, Megat and Muhamad Said, Mohd. Farid (2015) Simulation studies on the performance of small engine fuelled by methane and the effect of various valve timings. In: The 4th International Conference on Computer Science & Computational Mathematics (ICCSM 2015)", 7-8 May, 2015, Langkawi, Malaysia.

Mohammad Diab, Nateg (2015) Microstructure and mechanical properties of Al-Alloy with rare earth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Yazid, Amirul Akmal (2015) Electrical discharge machining of hybrid material using copper electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Khdher, AbdolBaqi and Che Sidik, Nor Azwadi and Mamat, Rizalman and Wan Hamzah, Wan Azmi (2015) Experimental and numerical study of thermo-hydraulic performance of circumferentially ribbed tube with Al2O3 nanofluid. International Communications in Heat and Mass Transfer, 69 . pp. 34-40. ISSN 0735-1933

Mohd. Ahyan, Nurul Aini and Samion, Syahrullail (2015) Lubricant viscosity: evaluation between existing and alternative lubricant in metal forming process. In: The 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Mohd. Ahyan, Nurul Aini and Samion, Syahrullail and Daud, Md. Razak (2015) Non-edible palm oil : alternative to mineral based lubricant in metal forming process. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Pulau Pinang, Malaysia.

Mohd. Alias, Adib Zulhilmi (2015) Pressure drop prediction for stratified oil-water flow in horizontal pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Azli, Anis Athirah (2015) Computational study of turbulent unconfined swirl flames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Bahari, Zaili (2015) Dynamics characteristics and energy absorption of fibre-metal-laminate (FML) thin-walled tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Bakhori, Siti Nadia and Hassan, Mohamad Zaki and Md. Daud, Mohd. Yusof and Sarip, Shamsul and A. Rahman, Noor Khazanah and Ismail, Z. and Abdul Aziz, Sa'ardin (2015) Mechanical behavior of kenaf/epoxy corrugated sandwich structures. In: 3rd International Conference on Mechanical Engineering Research (ICMER), 18-19 Aug, 2015, Pahang, Malaysia.

Mohd. Faizal Ali Akhbar, (2015) Enhancement of heat transfer coefficient in an automobile radiator by using nanocoolant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ghazali, Normah (2015) Environmentally friendly thermoacoustics refrigeration: theory and applications. In: 14th International Conference on QiR (Quality in Research) 2015, 10-13 August, 2015, Indonesia.

Mohd. Ghazali, Normah and Liew, Kim Fa and Zolpakar, Nor Atiqah (2015) End effects of a thermoacoustic stack plate on the flow pattern. In: 14th International Conference on QiR (Quality in Research) 2015, 10-13 August, 2015, Indonesia.

Mohd. Ghazali, Normah and Razali, Shazwan Fitri and Jamaludin, Hishamuddin (2015) Investigation of the minimized pressure drop of four refrigerants in a small channel with genetic algorithm. In: 14th International Conference on QiR (Quality in Research) 2015, 10-13 August, 2015, Indonesia.

Mohd. Ghazali, Normah and Yousif, Qais Abid and Pamitran, Agus Sunjarianto and Novianto, Sentot and Ahmad, Robiah (2015) Optimization of the friction factor and frictional pressure drop of R22 and R290. In: 8th International Meeting on Advances in Thermofluids, 11-12 Nov, 2015, Indonesia.

Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and Kareem, Zaid Sattar and Abdulwahid, Ammar Fakhir (2015) Corrugation profile effect on heat transfer enhancement of laminar flow region. In: International Conference on Mechanical and Industrial Engineering (ICMAIE 2015), 8-9 Feb, 2015, Kuala Lumpur, Malaysia.

Mohd. Noor, Alias and Che Puteh, Rosnizam and Martinez Botas, Ricardo and Rajoo, Srithar and Romagnoli, Alessandro and Al-Naib, Uday M.Basheer and Shaikh Salleh, Sheikh Hussain and Md. Sah, Muhammad Hanafi (2015) Technologies for waste heat energy recovery from internal combustion engine: a review. In: International Conference On "New Trends in Multidisciplinary Research & Practice, 4-5 Nov, 2015, Turkey.

Mohd. Rohani, Jafri and Abdul Kadir, Aini Zuhra and Abdul Rani, Mat Rebi and Md. Zein, Raemy and Abdul Aziz, Roseni and Adeyemi, Ademola James (2015) Musculoskeletal disorders in body regions and its associated risk factors among electronics workers in Malaysia. In: Proceedings 19th Triennial Congress of the IEA, 9-14 Aug, 2015, Australia.

Mohd. Rohani, Jafri and Abdul Kadir, Aini Zuhra and Abdul Rani, Mat Rebi and Md. Zein, Raemy and Abdul Aziz, Roseni and James, Adeyemi Ademola (2015) Musculoskeletal disorders in body regions and its associated risk factors among electronic workers in Malaysia. In: Proceedings 19th Triennial Congress of the IEA, 9-14 Aug, 2015, Australia.

Mohd. Rohani, Jafri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood and James, Adeyemi Ademola and Udin, Amirmudin (2015) Occupational accident direct cost model validation using confirmatory factor analysis. In: The 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), 4-6 Feb, 2015, Indonesia.

Mohd. Rohani, Jafri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood and James, Adeyemi Ademola and Udin, Amirmudin (2015) Occupational accident indirect cost model validation using confirmatory factor analysis. In: The 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), 4-6 Feb, 2015, Indonesia.

Mohd. Salleh, Mohd. Naqiuddin (2015) Study on the performance of envo diesel in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Shamsulizan Mustapa, (2015) Design and development of a flow forming machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yamin, Ahmad Hafizal (2015) Semiactive suspension system using sky hook controller with particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Zamberi, Mahanum and Hassan, S. N. H. and Ani, Farid Nasir (2015) Optimization of biodiesel production from transesterification of waste cooking oils using alkaline catalysts. In: Applied Mechanics And Materials, 2015.

Mohd. Zulkifli, S. and Mat Yajid, Muhamad Azizi and Idris, Mohd. Hasbullah and Daroonparvar, M. and Hamdan, Halimaton (2015) TGO formation with nicocralyta bond coat deposition using aps and HVOF method. In: Advanced Materials Research, 2015.

Mohd.Sam, Abdul Rahman and Gholami, Mehran and Mohamad Yatim, Jamaludin and Abu Hassan, Shukur (2015) Performance of carbon fibre reinforced polymer plate bonding system under various environmental conditions. In: 9th Asia Pacific Structural Engineering and Construction Conference and 8th Asean Civil Engineering Conference, 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mohsenizadeh, Saeid (2015) Impact characteristic and energy absorption of auxetic foam-filled square tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohsenizadeh, Saeid and Alipour, Roozbeh and Nejad, Ali Farokhi and Shokri Rad, Mozafar and Ahmad, Zaini (2015) Experimental investigation on energy absorption of auxetic foamfilled thin-walled square tubes under quasi-static loading. In: 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Mortaza, Ahmad (2015) CFD modeling of flow induced vibration mechanism in sea water piping on a regasification terminal platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad Said, Mohd. Farid and N. W. M., N. W. M. and Zulikfli, Zulikfli and Edilan, M. M. and Kalam, M. A. and Ghazali, N. N. N. (2015) Effect of valve timing events on the performance of compressed natural gas direct injection (CNGDI) engine using simulation. In: International Conference on Mechanical Engineering and Advanced Material 2015, 3-4 Dec, 2015, Sabah, Malaysia.

Muhamad Said, Mohd. Farid and Rajoo, Srithar and Zahari, Izzarief (2015) Flow characterization of complete air induction system in internal combustion engine. In: The 13th Asian International Conference on Fluid Machinery 2015, 7-10 Sept, 2015, Japan.

Mustapha, Siti Noor Hidayah and Rahmat, Abdul Razak and Arsad, Agus and Alsagayar, Zyad Salem and Yeong, Shoot Kian (2015) Flexural properties of mmt reinforced unsaturated polyester/epoxidized palm oil biobased resin. In: Advanced Materials Research, Materials Research Society of Indonesia (MRS-ID) Meeting 2014, September 26-28, 2014, Bali, Indonesia, 26-28 Sept, 2015, Indonesia.

Musthafa, Anas Basri (2015) Study on the performance of palm methyl ester in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

N

Nabeel Najm Bahlol, (2015) Effect post treatment parameters on corrosion resistance of Ti-13Nb- 13Zr coated with hydroxyapatite via electrophoretic deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nakis, M. and Abdul Malik, Adi Maimun and Ahmeda, Yasser M. and Behrouzi, F. and Steen, S. and Tarmizi, A. (2015) Hydrodynamic resistance analysis of new hull design for multipurpose amphibious vehicle applying with finite volume method. Jurnal Teknologi, 74 (5). pp. 73-76. ISSN 2180-3722

Nakisa, M. and Maimun, A. and Ahmed, Y. M. and Behrouzi, F. and Jaswara, Jaswara and Tarmizi, A. (2015) Air lubrication influence on frictional resistance reduction of multi-purpose amphibious vehicle. Jurnal Teknologi, 74 (5). pp. 1-3. ISSN 2180–3722

Nasution, Henry and Abdul Azis, Azhar and Zulkifli, Amirah Haziqah and Dahlan, Afiq Aiman (2015) In-cabin temperature control and multi-circuit bus air-conditioning systems. In: Seoul International Conference on Applied Science and Engineering, 27-29 June, 2015, South Korea.

Nasution, Henry and Abdul Aziz, Azhar and Dahlan, Afiq Aiman and Zulkifli, Amirah Haziqah and Sumeru, Sumeru (2015) Indoor temperature control and energy saving potential of an air conditioning system using PD controller. Jurnal Teknologi, 76 (11). pp. 63-67. ISSN 2180-3722

Navaei, Ali S. and Mohammed, Hussein A. and Munisamy, Kannan M. and Yarmand, Hooman and Gharehkhani, Samira (2015) Heat transfer enhancement of turbulent nanofluid flow over various types of internally corrugated channels. Powder Technology, 286 . pp. 332-341. ISSN 0032-5910

Nawi, Norazlina Mohd and Muhamad, Ida Idayu and Marsin, Aishah Mohd (2015) The physicochemical properties of microwave-assisted encapsulated anthocyanins from Ipomoea batatas as affected by different wall materials. Food Science & Nutrition, 3 (2). pp. 91-99. ISSN 2046-2069

Nekooei, Mohammad Javad and Jaswar, Koto and Priyanto, Agoes (2015) A simple fuzzy logic diagnosis system for control of internal combustion engines. Jurnal Teknologi, 74 (5). pp. 121-124. ISSN 0127-9696

Ng, Boon Chiang (2015) Soft computing based controllers for automotive air conditioning system with variable speed compressor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Geak Kun (2015) Modelling and active vibration control of flexible manipulator structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Jo-Han and Wong, Yao Hing and Fong, William Woei Chong and Chong, Cheng Tung and Chjiatlsabelle, Wong Minh (2015) Chemistry smart phone app with gamification elements for personalised learning. In: 6th International Conference on Science and Mathematics Education, 16-19 Nov, 2015, Penang, Malaysia.

Ngadiman, Nor Hasrul Akhmal and Idris, A. and Irfan, Muhammad and Kurniawan, Denni and Mohd. Yusof, Noordin and Nasiri, Rozita (2015) γ-Fe2O3 nanoparticles filled polyvinyl alcohol as potential biomaterial for tissue engineering scaffold. Journal of the Mechanical Behavior of Biomedical Materials, 49 . pp. 90-104. ISSN 1751-6161

Ngali, Mohd. Zamani and Osman, Kahar and Zakaria, Nazri Huzaimi (2015) Non-dimensional distribution pattern analysis of particle transportation in simplified pipeline system. Jurnal Teknologi, 77 (12). pp. 99-104. ISSN 2180-3722

Ngali, Zamani and Huzaimi, Nazri and Eng, Pei Ying and Osman, Kahar (2015) Four-dimensional simulation of particle transportation in simplified passageways system. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7103-7106. ISSN 1819-6608

Ngien, Su Kong and Ken, Tan Lit (2015) Numerical model for NAPL migration in double-porosity subsurface systems. In: 36th IAHR World Congress, The Hague, Netherlands, 2015, 28 June-3 July, 2015, Netherlands.

Ngui, Wai Keng and Leong, Mohd. Salman @ Yew Mun and Lim, Meng Hee and Abdelrhman, Ahmed Mohammed (2015) Detection of twisted blade in multi stage rotor system. In: Applied Mechanics and Materials, 1-4 Dec 2015, Batu Pahat, Johor.

Noorawzi, Nuraliza and Samion, Syahrullail (2015) Experimental study of spherical pins under varying load condition using pin-on-disk tribotester. In: The 8th International Meeting on Advances in Thermofluids, 11-12 Nov, 2015, Indonesia.

Noorawzi, Nuraliza and Samion, Syahrullail and M.N., Musa (2015) Evaluation on the tribological properties of double fractionated palm olein at different load using pin-on-disk machine. In: World Virtual Conference on Applied Sciences and Engineering Applications, 2015.

Nor Azwadi, C. S. and Mamat, Rizalman (2015) Recent progress on Lattice Boltzmann simulation of nanofluids: a review. International Communications in Heat and Mass Transfer, 66 . pp. 11-22. ISSN 0735-1933

Nor Hassan, Abdul Hafiz (2015) Development and analysis of pulse detonation engine (PDE) with fuel-air premixed intake system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Norwazan, A. R. and Mohd. Jaafar, Mohammad Nazri (2015) The Reynold’s number effect in high swirling flow in unconfined burner. Jurnal Teknologi, 72 (4). pp. 83-89. ISSN 0127-9696

Nuraliza, N. and Syahrullail, Samion and Musa, Md. Nor (2015) Evaluation on the tribological properties of double fractionated palm olein at different loads using pin-on-disc machine. Jurnal Teknologi, 75 (11). pp. 113-122. ISSN 2180-3722

Nuriyadi, Muhammad and Sumeru, Sumeru and Nasution, Henry (2015) The effect of liquid suction heat exchanger sub-cooler on performance of a freezer using R404A as working fluid. Jurnal Teknologi, 76 (11). pp. 57-61. ISSN 0127-9696

O

Olanrewaju, Oladokun Sulaiman and Kong, Fah Tee and Kader, A. S. A. (2015) Water quality test and site selection for suitable species for seaweed farm in east coast of Malaysia. Biosciences Biotechnology Research Asia, 12 . pp. 33-39. ISSN 0973-1245

Onn, Irwan Herman and Ahmad, Norhayati and Tamin, Mohd. Nasir (2015) Fatigue characteristics of dual-phase steel sheets. Journal of Mechanical Science and Technology, 29 (1). pp. 51-57. ISSN 1738-494X

Othman, Abdul Muta'Ali and Liew, Yong Kian (2015) Computer tools and thinking pattern in ideation process. In: 4th International Conference of Applied and Creative Art, 22-23 Oct, 2015, Sarawak, Malaysia.

P

Padzillah, M. H. and Rajoo, Srithar and Martinez-Botas, R. F. (2015) Experimental and numerical investigation on flow angle characteristics of an automotive mixed flow turbocharger turbine. Jurnal Teknologi, 77 (8). pp. 7-12. ISSN 2180-3722

Padzillah, M. H. and Rajoo, S. and Martinez Botas, R. F. (2015) Drawbacks on the application of nozzle vanes in turbocharger turbine under pulsating flow conditions. In: Symposium on Engine Boosting and Energy Recovery 2015, 15-16 Sept, 2015, Skudai, Johor.

Padzillah, Muhamad Hasbullah and Rajoo, Srithar and Mingyang, Yang and Martines-Botas, Ricardo (2015) Influence of pulsating flow frequencies towards the flow angle distributions of an automotive turbocharger mixed-flow turbine. Energy Conversion and Management, 98 (1). pp. 449-462. ISSN 0196-8904

Paramasivam, Kishokanna and Mohamed, Danial and Romagnoli, Alesssandro and Rajoo, Sritha and Mohd. Noor, Alias (2015) Aeroacoustics characterization methodology applicable to turbocharger compressor. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7773-7779. ISSN 1819-1894

Porman, Jumari (2015) Numerical simulation of vortex combustion for various air-fule configurations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Prawoto, Yunan and Alias, Amran (2015) Stress intensity factor and plastic zone of auxetic materials: a fracture mechanics approach to a chiral structure having negative poissons ratio. Mechanics of Advanced Materials and Structures, 22 (3). pp. 213-223. ISSN 1537-6494

Putra, A. M. S. and Harun, M. N. and Syahrom, Ardiyansyah and Abdul Kadir, M. R. (2015) Effect of radial and thickness of polyethylene on wear generation in total ankle replacement. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Penang, Malaysia.

R

Rad, Mozafar Shokri (2015) Auxetic structures for energy absorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rad, Mozafar Shokri and Ahmad, Zaini (2015) Finite element modelling of different 2D re-entrant structures of auxetic materials. In: Second International Conference On Advances in Mechanical and Automation Engineering - MAE 2015, 18-19 April, 2015, Rome, Italy.

Rahim, Muhammad Roslan and Mohd. Ja’afar, Mohammad Nazri (2015) Kesan sudut pusaran terhadap pembakaran menggunakan pemusar jejarian dwi aliran. Jurnal Teknologi, 77 (8). pp. 37-45. ISSN 2180-3722

Razavykia, Abbas and Farahany, Saeed and Mohd. Yusof, Noordin (2015) Evaluation of cutting force and surface roughness in the dry turning of Al-Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach. Measurement: Journal of the International Measurement Confederation, 76 . pp. 170-182. ISSN 0263-2241

Redzuan, Norizah and Cham, Chern Hau and Foo, Jin Hoe and Zakaria, Khidzir (2015) 3D CAD model physical analysis using additive manufacturing process. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Rezaei, Ghasem (2015) Relationship between culture of excellence and organizational performance with knowledge sharing as mediating role. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

Saad, Mohd. Sazli and Jamaluddin, Hishamuddin and Mat Darus, Intan Zaurah (2015) Active vibration control of a flexible beam using system identification and controller tuning by evolutionary algorithm. Journal of Vibration and Control, 21 (10). pp. 2027-2042. ISSN 1077-5463

Sabrudin, Mohd. Aizad Sazrul and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain (2015) Effects of asymmetric intake valve lift configuration towards in-cylinder air flow behavior. In: International Conference on Computational Fluid Dynamics in Research & Industry 2015, 17-19 Aug, 2015, Kuala Lumpur, Malaysia.

Sadegh, Omidreza (2015) Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadiq Aliyu, Abubakar and Abdul Aziz, Azhar and Yahya, Adibah and Abdul Lattiff, Zulkanain (2015) Potential of oil palm frond liquid extract and fiber as feedstock for bio-butanol production. Jurnal Teknologi, 74 (10). pp. 63-67. ISSN 0127-9696

Saeed, Khurram (2015) Evaluating the renewable energy sources in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safari, Habib and Sharif, Safian and Izman, S. and Jafari, Hassan (2015) Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy. International Journal of Advanced Manufacturing Technology, 78 (1-4). pp. 651-657. ISSN 0268-3768

Said, Mazuriah and Mat, Shabudin and Mansor, Shuhaimi and Abdul Latif, Ainullotfi and Mat Lazim, Tholudin (2015) Reynolds number effects on flow topology above blunt-edge delta wing VFE-2 configurations. In: American Institute of Aeronautics and Astronautics (Aiaa Conference) 2015, 5-9 Jan, 2015, United States.

Said, N. H. and Ani, Farid Nasir and Muhammad Said, Mohd. Farid (2015) Review of the production of biodiesel from waste cooking oil using solid catalysts. Journal of Mechanical Engineering and Sciences, 8 . pp. 1302-1311. ISSN 2289-4659

Salman, B. H. and Mohammed, Hussein A. and Munisamy, Kannan M. and Kherbeet, Aqeel S. (2015) Three-Dimensional Numerical Investigation of Nanofluids Flow in Microtube with Different Values of Heat Flux. Heat Transfer - Asian Research, 44 (7). pp. 599-619. ISSN 1099-2871

Salman, B.H. and Mohammed, Hussein A. and Kherbee, A. Sh and Ahmed, Hamdi E. (2015) The effect of geometrical parameters on enhancing the heat transfer inside a microtube. Intertiol Jourl Of Heat And Technology, 33 (3). pp. 79-84. ISSN 3924-80

Samiran, Nor Afzanizam and Mohd. Jaafar, Mohammad Nazri and Chong, Cheng Tung and Ng, Jo Han (2015) A review of palm oil biomass as a feedstock for syngas fuel technology. Jurnal Teknologi, 72 (5). pp. 13-18. ISSN 0127-9696

Samsubaha, Muhammad Fauzi (2015) Study on the performance of biodiesel blend Jathropa oil in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saud, Safaa Najah and Hamzah, Esah Binti and Abubakar, Tuty Asma Abu and Bakhsheshi-Rad, Hamid Reza (2015) Thermal aging behavior in Cu-Al-Ni-xCo shape memory alloys. Journal of Thermal Analysis and Calorimetry, 119 (2). pp. 1273-1284. ISSN 1388-6150

Serevina, Vina and Sumeru, Sumeru and Abdul Aziz, Azhar and Nasution, Henry (2015) Performance comparison of automotive air conditioner using various refrigerants. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Serevina, Vina and Sumeru, Sumeru and Nasution, Henry (2015) Effect of refrigerant on the exergy loss and performance in air conditioner using ejector as expansion device. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Shaari, Muhammad Syafiq and Mohd. Ghazali, Normah and Jamaludin, Hishamuddin (2015) Analysis of different friction factor correlations on the frictional pressure drop of two-phase flow ammonia-cooled minichannel. In: The 8th International Meeting on Advances in Thermofluids (IMAT), 11-12 Nov, 2015, Indonesia.

Shaf'i, Herul Azrul (2015) Assessment of onshore wind energy potential in Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaharuddin, Nik Mohd. Ridzuan and Mat Darus, Intan Zaurah (2015) Experimental study of vortex-induced vibrations of flexibly mounted cylinder in circulating water tunnel. Acta Mechanica, 226 (11). pp. 3795-3806. ISSN 0001-5970

Sharafatmandjoor, Shervin and Che Sidik, Nor Azwadi and Fathalizadeh, Hamidreza (2015) Imposition of the no-slip boundary condition via modified equilibrium distribution function in Lattice Boltzmann method. International Communications in Heat and Mass Transfer, 62 . pp. 33-36. ISSN 0735-1933

Sharafatmandjoor, Shervin and Taeibi-Rahni, Mohammad and Che Sidik, Nor Azwadi (2015) Formation and breakup patterns of falling droplet. Numerical Heat Transfer Part A: Applications, 68 (9). pp. 1023-1030. ISSN 1040-7782

Sharifishourabi, Gholamali and Ayob, Amran and Gohari, Soheil and Yahya, Mohd. Yazid and Sharifi, Shokrollah and Vrcelj, Zora (2015) Flexural behavior of functionally graded slender beams with complex cross-section. Journal of Mechanics of Materials and Structures, 10 (1). pp. 1-16. ISSN 1559-3959

Shirdar, Mostafa Rezazadeh and Sudin, Izman and Taheri, Mohammad Mandi and Keyvanfar, Ali and Mohd. Yusop, Mohd. Zamri and Abdul Kadir, Mohammed Rafiq (2015) A novel hydroxyapatite composite reinforced with titanium nanotubes coated on Co-Cr-based alloy. Vacuum, 122 . pp. 82-89. ISSN 0042-207X

Suhaimi, Mohd. Suardi and Saat, Aminuddin and Abd. Wahid, Mazlan (2015) Flame propagation and burning rates of methane-air in a closed combustion vessel. In: 8th International Meeting of Advances in Thermofluid, 11-12 Nov, 2015, Indonesia.

Suhiri, Farahdatul Sahuda (2015) Thermodynamic cycle analysis of Pulse Detonation Engine (PDE) by biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sukri, Mohamad Firduas and Musa, Md. Nor and Senawi, Mohd. Yusoff and Nasution, Henry (2015) Achieving a better energy-efficient automotive air-conditioning system: a review of potential technologies and strategies for vapor compression refrigeration cycle. Energy Efficiency, 8 (6). pp. 1201-1229. ISSN 1570-646X

Sulaiman, Nabila (2015) CFD study on aortic cannula (flow characteristics). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, O. Olanrewaju and Amagee, A. and Abd. Kader, Ab. Saman (2015) Experimental study of native macro algae species identification for open water farming for biofuel plant energy feed stock. Biosciences Biotechnology Research Asia, 12 . pp. 799-806. ISSN 0973-1245

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishammuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Semi active suspension magnetorheological damper control using quarter-vehicle model. In: The 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015), 7-8 May, 2015, Langkawi, Malaysia.

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Tire force control for semi active magnetorheological damper suspension system using quarter heavy vehicle model. In: Applied Mechanics and Materials, 2 Sept, 2015, Kuala Lumpur, Malaysia.

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Tyre Force Control strategy for semi-active magnetorheological damper suspension system for light-heavy duty truck. International Journal of Vehicle Autonomous Systems, 13 (1). pp. 65-90. ISSN 1471-0226

Sulaimon, Shodiya and Abdul Aziz, Azhar and Nasution, Henry and Darus, Amer Nordin (2015) Empirical correlations for sizing adiabatic capillary tubes using conventional refrigerants and their alternatives. Heat Transfer Research, 46 (5). pp. 483-501. ISSN 2162-6561

Sumeru, Sumeru and Pramudantoro, Triaji P. and Ani, Farid Nasir and Nasution, Henry (2015) Enhancing air conditioning performance using TiO2 nanoparticles in compressor lubricant. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Supriyo, Bambang and Tawi, Kamarul Baharin and Che Kob, Mohd. Sabri and Mazali, Izhari Izmi (2015) Secondary pulley clamping force controller for electro-mechanical dual acting pulley continuously variable transmission system. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7734-7738. ISSN 1819-6608

Surendran Pillay, S. Sadish Kumar (2015) Biogas generation from palm oleochemical effluent for steam production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

T

Taheri, Mohammad Mahdi and Abdul Kadir, Mohammed Rafiq and Shokuhfar, Tolou and Hamlekhan, Azhang and Shirdar, Mostafa Rezazadeh and Naghizadeh, Farnaz (2015) Fluoridated hydroxyapatite nanorods as novel fillers for improving mechanical properties of dental composite: synthesis and application. Materials and Design, 82 . pp. 119-125. ISSN 0264-1275

Thangavelu, Saravana Kannan and Piraiarasi, C. and Ahmed, Abu Saleh and Ani, Farid Nasir (2015) Compatibility of elastomers in bio-diesel diesel bioethanol blend (BDE). In: Advanced Materials Research, 22-26 Sept, 2015.

Thangavelu, Saravana Kannan and Piraiarasi, C. and As Ahmed, As Ahmed and Ani, Farid Nasir (2015) Corrosion behavior of copper in biodiesel diesel bioethanol (BDE). In: Advanced Materials Research, 2015.

Tok, H. Y. and Hamzah, Esah and Bakhsheshi-Rad, Hamid Reza (2015) The role of bismuth on the microstructure and corrosion behavior of ternary Mg-1.2Ca-xBi alloys for biomedical applications. Journal of Alloys and Compounds, 640 . pp. 335-346. ISSN 9258-388

U

Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Nizam, Muhammad Khair and Mazlan, Saiful Amri (2015) Response of a magnetorheological brake under inertial loads. International Journal on Electrical Engineering and Informatics, 7 (2). pp. 308-322. ISSN 2085-6830

W

Wahab, Muhammad Faiz and Aung, Lwin Moe and Abu, Aminudin and Yaacob, Zulkifli and Legowo, Ari (2015) Development of automated parallel parking system in small mobile vehicle. In: 2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronics Engineering Technology International Conference (AR4MET'2015), 2-4 Jun, 2015, Bali, Indonesia.

Waheed, Muneer Naji and Abu Bakar, Abd. Rahim and Abdul Hamid, Mohd. Kameil (2015) Disc brake squeal occurrences under dry and wet brake pad conditions. In: The 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Wan Ali, Wan Khairuddin and Kiang, Long Ang and Mohd. Jaafar, Mohammad Nazri (2015) Experimental solid and liquid propellant rocket development in Universiti Teknologi Malaysia: 1992-2011. Jurnal Teknologi, 73 (1). pp. 35-52. ISSN 2180-3722

Widodo, (2015) Evaluation of hole quality on micro drilling AISI 304 austenitic stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Willberg, Christian and Duczek, Sascha and Vivar-Pérez, Juan Miguel and Ahmad, Zair Asrar (2015) Simulation methods for guided wave-based structural health monitoring: a review. Applied Mechanics Reviews, 67 (1). ISSN 0003-6900

Wong, K. J. and Johar, M. and Gong, X. J. and Aivazzadeh, S. and Tamin, M. N. (2015) Influence of water absorption on Mode I delamination in carbon/epoxy composite laminates. In: International Conference on Mechanical Engineering and Advanced Materials (ICME-AM 2015), 3-4 Dec, 2015, Sabah, Malaysia.

Wong, Kuan Yew and Tan, Li Pin and Lee, Cheng Sheng and Wong, Wai Peng (2015) Knowledge management performance measurement: measures, approaches, trends and future directions. Information Development, 31 (3). pp. 239-257. ISSN 0266-6669

Wong, Prisillia Yuean Ning and Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Mohd. Perang, Mohd. Rozi (2015) The effect of decontaminants on vehicle cooling system. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Y

Yaakob, Yazid and Kuwataka, Yu and Yusop, M. Zamri and Tanaka, Shihomi and Rosmi, Mohamad Saufi and Kalita, Golap and Tanemura, Masaki (2015) Room-temperature growth of ion-induced Si- and Ge-incorporated carbon nanofibers. Physica Status Solidi (B) Basic Research, 252 (6). pp. 1345-1349. ISSN 0370-1972

Yaakob, Yazid and Mohd. Yusop, Mohd. Zamri and Takahashi, Chisato and Rosmi, Mohamad Saufi and Kalita, Golap and Tanemura, Masaki (2015) In situ transmission electron microscopy of Ag-incorporated carbon nanofibers: the effect of Ag nanoparticle size on graphene formation. RSC Advances, 5 (8). pp. 5647-5651. ISSN 2046-2069

Yanagida, Naoto and Ohata, Makoto and Horisawa, Hideyuki and Kobayashi, Akira (2015) An Al - water fed DC arcjet. In: Advances in Applied Plasma Science, 31 Aug-4 Sept, 2015, Japan.

Yap, Yoon Loy (2015) Intelligent neural network for modelling and control of an automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yasak, Mohd. Fuad (2015) Sustainable assessment in manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yong, T. M. and Hamzah, E. and Mat Yajid, M. A. (2015) Characterisation of nanocrystalline diamond coating deposited via hot filament chemical vapour deposition method with various seeding methods. Jurl Teknologi, 75 (7). pp. 51-59. ISSN 1279-696

Yong, Tze Mi (2015) Nanocrystalline diamond deposited on tungsten carbidecobalt substrates using hot filament chemical vapour deposition technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yousif, Qais Abid and Mohd. Ghazali, Normah and Zolpakar, Nor Atiqah and Novianto, Sentot and Pamitran, Agus Sujiantro and Ahmad, Robiah (2015) Modeling of the minimized two-phase frictional pressure drop in a small tube with different correlations. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Z

Zaidan, Husain and Mohd. Ghazali, Normah and Ahmad, Robiah (2015) Optimization of a single phase rectangular microchannel heat sink cooling system. In: 8th International Meeting on Advances in Thermofluids, 11-12 Nov, 2015, Indonesia.

Zainal, Nurezayana and Mohd. Zain, Azlan and Sharif, Safian (2015) Overview of artificial fish swarm algorithm and its applications in industrial problems. In: Applied Mechanics and Materials, 31 Jul - 1 Aug, 2015, Indonesia.

Zainal Abidin, Shaiful Fadzil and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkanain and Zahari, Izzarief and Said, M. (2015) The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation. Jurnal Teknologi, 77 (8). pp. 107-111. ISSN 0127-9696

Zaini, Ahmad and Mozafar, Shokri Rad (2015) New approach for fabrication of auxetic foam and determination of poisson's ratio. In: Applied Mechanics and Materials, 2015.

Zakaria, Ahmad Syazni (2015) Design and development of low-cost friction stir welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Khidzir and Ismail, Zurina and Redzuan, Norizah and Dalgrano, K. W. (2015) Effect of wire EDM cutting parameters for evaluating of additive manufacturing hybrid metal material. In: MIMEC 2015, 4-5 Feb, 2015, Indonesia.

Zakaria, Khidzir and Redzuan, Norizah and Dalgrano, K. W. (2015) Metal fabrication evaluation through additive manufacturing process of Indirect Metal Laser Sintering. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Zakaria, Khidzir and Redzuan, Norizah and Foo, Jin Hoe and Cham, Chern Hau (2015) 3D CAD model physical analysis using aditive manufacturing process. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Zardian, Mohsen Gol and Ayob, Amran (2015) Intelligent modelling and active vibration control of flexible manipulator system. Journal of Vibroengineering, 17 (4). pp. 1879-1891. ISSN 1392-8716

Zulkifli, A. H. and Nasution, H. and Dahlan, A. A. and Abdul Aziz, A. (2015) In-cabin vehicle initial temperature control: a review. In: Proceedings of the 4th World Virtual Conference on Applied Sciences and Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Zulkifli, Amirah Haziqah and Dahlan, Afiq Aiman and Nasution, Henry and Abdul aziz, Azhar and Chin, Youk Sheong (2015) Performance analysis of passenger vehicle air conditioning system fitted with variable speed electric compressor. In: International Conference on Knowledge Transfer (ICKT'15), 1-3 Dec, 2015, Kuala Lumpur, Malaysia.

Zulkifli, Amirah Haziqah and Nasution, Henri and Dahlan, Afiq Aiman and Abdul Aziz, Azhar (2015) Direct current compressor for vehicle air conditioning system in non-electric vehicles. In: Seoul International Conference on Applied Science and Engineering, 27-29 June, 2015, South Korea.

This list was generated on Sun Nov 19 03:34:03 2017 +08.