Items where Year is 2015

Mahmud, Jafaru Oshiobugie (2015) Development of product design specifications for paraplegic wheelchair. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruzaman, Natrah (2015) Thermal hydraulic performance of microchannel heat sink device. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Parimin, Noraziana (2015) Effect of solution treatment on high temperature oxidation of Fe-33Ni-19Cr and Fe-40Ni-24Cr alloys. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abbasabadi, Reza Hassanzadeh (2015) A modified savonius turbine with moveable blades for higher efficiency. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasan, Mohd. Faizal and Abdul Latiff, Zulkarnain and Mohd. Iskandar, Muhammad Amin (2015) Physical characteristics of pulverized EFB briquettes produced under various heating temperatures. In: 8th International Meeting on Advances in Thermofluids, 11-12 Nov 2015, Indonesia.

Abdul Wahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Mohd. Jaafar, Mohammad Nazri and Kareem, Zaid Sattar (2015) Experimental thermal field measurements of film cooling with twisted holes. International Review of Aerospace Engineering, 8 (3). pp. 86-94. ISSN 1973-7459

Mohammad, R. and Sharifi, F. and Sharifi, D. and Othman, N. and Kadir, Z. A. (2015) Targeting method of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Mohammad, R. and Sharifi, F. and Sharifi, D. and Othman, Norazli and Kadir, Z. A. (2015) Design of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Mohammad, R. and Sharifi, F. and Sharifi, D. and Othman, N. and Kadir, Z. A. (2015) Optimization of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Ab.d Kader, Ab. Saman and Azman, Shamila and Trocchia, Samantha and Alwany, Magdy A. and Sulaiman, Oladokun Olanrewaju and Guerriero, Giulia (2015) Risk and reliability analysis of the effect of underwater noise pollution towards marine animals. International Journal Of Scientific And Engineering Research, 6 (9). pp. 1038-1048. ISSN 2229-5518

Abas, Mohd. Azman and Muhamad Said, M. F. and Zainal Abidin, Shaiful Fadzil and Zahari, Izzarief (2015) Simulation of fuel economy for Malaysian urban driving. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2306-2316. ISSN 2229-8649

Abbas, Muhammad Rabiu and Mohd. Noor, Alias and Rajoo, Srithar and Ahmad, Norhayati and Basheer, Uday M. and Md. Sah, Muhammad Hanafi (2015) Thermal conductivity and specific heat capacity of different compositions of Yttria stabilized zirconia-nickel mixtures. In: Advanced Materials Research, 2015.

Abd. Aziz, Nurul Hazirah (2015) System identification and control of the horizontal motion of a twin rotor multi-input multi-output system (TRMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Halim, Khairul Adzha and Mat, Shabudin (2015) Computational fluid dynamic on double delta wing. Journal Of Aeronautical Science And Engineering, 2 . pp. 9-14. ISSN 2442-6407

Abd. Kader, Ab. Saman (2015) River restroration for inland waterways transportation system. In: The 1st International Conference on Maritime Development, 4-6 Sept, 2015, Indonesia.

Abd. Kader, Ab. Saman and Dalim, N. Hasnaa Kamilah and Kasypi, M. (2015) Classification of seaport: a review of container terminal. In: Malaysia Universities Transport Research Forum Conference, 24-25 Nov, 2015, Selangor, Malaysia.

Abd. Kader, Ab. Saman and Mohamad Salleh, M. K. and Jalal, Mohd. Rajali and Oladokun, Sulaiman and Wan Shamsuri, Wan Nurulhuda (2015) Design of rubbish collecting system for inland waterways. Journal Of Transport System Engineering, 2 (2). pp. 1-13. ISSN 2289-9790

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan (2015) Navigational safety model in port operation. In: The 2nd International Conference on Ocean Mechanical and Aerospace - Science & Engineering, 21 Okt, 2015, Indonesia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan (2015) Optimization of fuel consumption rate for tugboat in relation to port operations. In: The 1st International Conference on Maritime Development, 4-6 Sept, 2015, Indonesia.

Abd. Kader, Ab. Saman and Rajendran, Gopala Krishnan and Wan Shamsuri, Wan Nurulhuda (2015) Design of lifeboat releasing system for ship board operation. In: The 2nd International Conference on Ocean Mechanical and Aerospace, 21-22 Okt, 2015, Indonesia.

Abd. Rahim, Shayfull Zamree (2015) Performance evaluation of conformal and straight cooling channels on injection moulded part. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdelbaky, Aly Hassan Abdalla and Yaakob, Omar and Ahmed Abdel Razak, Yasser Mohamed and Ab. Rashid, Muhammad Faisal (2015) Determining ship resistance using computational fluid dynamics (cfd). Journal Of Transport System Engineering, 2 (1). pp. 20-25. ISSN 2289-9790

Abdolahi, Ahmad (2015) Conductive polymer coatings towards inhibition of microbial-induced corrosion of low carbon steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdolbaqi, M. K. and Che Sidik, Nor Azwadi and Mamat, Rizalman and Wan Azmi, Wan Hamzah and Najafi, Gholam Hassan (2015) Nanofluids heat transfer enhancement through straight channel under turbulent flow. International Journal Of Automotive And Mechanical Engineering, 11 (1). pp. 2294-2305. ISSN 2229-8649

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Muhamad Said, Mohd. Farid and Mohd. Jamil, Hishammudin (2015) Single-cylinder 125 CC stepped piston engine for mobility and portable power generation applications. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Abdul Aziz, Azhar and Sumeru, Kasni and Muhamad Said, Mohd. Farid and Mohd. Perang, Mohd. Rozi and Nasution, Henry (2015) Single-cylinder 125 cc stepped piston engine for mobility and portable power generation applications. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Abdul Aziz, Roseni and James, Adeyemi Ademola and Abdul Kadir, Aini Zuhra and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2015) Effect of working posture on back pain occurrence among electronic workers in Malaysia. In: Procedia Manufacturing, 4-6 Feb, 2015, Indonesia.

Abdul Hamid, Mohd. Kameil and Asik, Abdul Aziz (2015) Study of tribological characteristics of continuous variable transmission oils. Journal Of Transport System Engineering, 2 (3). pp. 11-14. ISSN 2289-9790

Abdul Hassan, Shukur and Ismail, Yob Saed and Mohd. Sam, Abdul Rahman and Abu Hanan, Umar and Wahit, Mat Uzir (2015) Shear property of structural epoxy adhesive exposed to tropical weathering condition. Jurnal Teknologi, 77 (8). pp. 83-90. ISSN 0127-9696

Abdul Kadir, Aini Zuhra and Mohd. Rohani, Jafri and Arowolo, Matthew Oluwole (2015) Road safety outcome model among commercial bus. In: Advanced Materials Research, 4-6 Dec, 2015, Indonesia.

Abdul Khair, J. and Jaswar, Koto and Effendi, Affis and Fitriadhy, Ahmad (2015) Buckling criteria for subsea pipeline. Jurnal Teknologi, 74 (5). pp. 69-72. ISSN 0127-9696

Abdul Malik, Adi Maimun and Ahmed Abdel Razak, Yasser Mohamed and Che Embi, Zulhazazi and Sunarsih, Sunarsih and Mehdi Nakisa, Mehdi Nakisa (2015) Numerical simulation for stern flow characteristics of twin skeg container vessel. International Journal Of Mining, Metallurgy And Mechanical Engineering, 3 (3). pp. 149-154. ISSN 2320-4060

Abdul Rahim, Rabiatul Adibah and Fatihhi, Szali Januddi and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Syahrom, Ardiyansyah (2015) A narrative review of morphology of cancellous bone at different human anatomy- methods and parameters. In: Applied Mechanics and Materials, 2015.

Abdul Raman, Noor Azah and Hainin, Mohd. Rosli and Abdul Hassan, Norhidayah and Ani, Farid Nasir (2015) A review on the application of bio-oil as an additive for asphalt. Jurnal Teknologi, 72 (5). pp. 105-110. ISSN 0127-9696

Abdullah, Ahmad Ammar Luqman (2015) Cost estimation model of structural steel for superstructure of wellhead platform in oil and gas industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Arman Shah (2015) Influence of ultrasonic vibration on TiN coated biomedical TI-13Zr-13Nb alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Mohamed Ruslan and Goharian, Amirhossein and Abdul Kadir, Mohammed Rafiq and Wahit, Mat Uzir (2015) Biomechanical and bioactivity concepts of polyetheretherketone composites for use in orthopedic implants : a review. Journal Of Biomedical Materials Research Part A, 103 (11). pp. 3689-3702. ISSN 1549-3296

Abdullah, Mohamed Ruslan and Prawoto, Yunan and Cantwell, Wesley James (2015) Interfacial fracture of the fibre-metal laminates based on fibre reinforced thermoplastics. Materials and Design, 66 . pp. 446-452. ISSN 0261-3069

Abdullah, Muhammad A'imullah and Arjmandi, Mohammad Reza and Koloor, Seyed Saeid Rahimian and King, Jye Wong and Tamin, Mohd. Nasir (2015) Interlaminar damage behavior of CFRP composite laminates under cyclic shear loading conditions. In: Advanced Materials Research, 4-6 Feb, 2015, Indonesia.

Abdullahi, Tijjani (2015) Adhesion of polymer coated steel wire by compression molding and extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdulridha, Mundher Fadhil and Jusoh, Muhamad Anuwar and Abu Bakar, Abd. Rahim and Abdullah, Mohamed Ruslan (2015) Reduction of drum brake squeal noise using constrained layer damping (CLD). In: 1st International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Abdulridha, Mundher Fadhil and Jusoh, Muhamad Anuwar and Abu Bakar, Abd. Rahim and Abdullah, Mohamed Ruslan (2015) Reduction of motorcycle's drum brake squeal noise using constrained layer damping (CLD). In: 1st ICRIL-International Conference on Innovation in Science and Technology (LICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

AbdulWahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Kareem, Zaid Sattar (2015) Investigation of effect holes twisted angle and compound angle of holes on film cooling effectiveness. International Review of Automatic Control, 8 (3). pp. 244-250. ISSN 1974-6059

AbdulWahid, Ammar Fakhir and Mat Lazim, Tholudin and Saat, Aminuddin and Kareem, Zaid Sattar (2015) Investigation of film cooling effectiveness enhancement by using corrugated spiral holes. International Review of Mechanical Engineering, 9 (4). pp. 360-367. ISSN 1970-8734

Abdussalam, Mamoon (2015) Mechanical properties of HFCVD microcrystaline diamond coated on seeded WC substrate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abed, Azher M. and Alghoul, Mohamad Ahmed and Sopian, Kamaruzzaman and Mohammed, Hussein A. and Majdi, Hasan Sh. and Al-Shamani, Ali Najah (2015) Design characteristics of corrugated trapezoidal plate heat exchangers using nanofluids. Chemical Engineering And Processing: Process Intensification, 87 . pp. 88-103. ISSN 2540-584

Abed, Azher M. and Sopian, Kamarozzaman and Mohammed, Hussein A. and Alghoul, Mohamad Ahmed and Ruslan, Mohd. Hafidz and Mat, Sohif and Al-Shamani, Ali Najah (2015) Enhance heat transfer in the channel with V-shaped wavy lower plate using liquid nanofluids. Case Studies in Thermal Engineering, 5 . pp. 13-23. ISSN 2214-157X

Abioye, A. M. and Ani, Farid Nasir (2015) Recent development in the production of activated carbon electrodes from agricultural waste biomass for supercapacitors: a review. Renewable and Sustainable Energy Reviews, 52 . pp. 1282-1293. ISSN 1364-0321

Abioye, Adekunle Moshood and Ani, Farid Nasir (2015) The characteristics of oil palm shell biochar and activated carbon produce via microwave heating. In: Applied Mechanics and Materials, 2015.

Abu Bakar, Noorilyana (2015) An optimization of mixing process parameters for soy sauce production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abu Bakar, S. A. and Jamaluddin, H. and Roslan, A. R. and Samin, P. M. (2015) Sensitivity analysis on skyhook and semi active damping force algorithms in semi active suspension system. In: The 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015), 7-8 May, 2015, Langkawi, Malaysia.

Abu Bakar, S. A. and Samin, P. M. and Jamaluddin, H. and Rahman, R. A. and Sulaiman, S. (2015) Semi active suspension system performance under random road profile excitations. In: 2nd International Conference on Computer, Communications, and Control Technology, I4CT 2015, 21 - 23 April 2015, Kuching, Sarawak.

Abu Bakar, Saiful Anuar and Muhammad Said, Mohd. Farid and Abdul Aziz, Azhar (2015) Ride comfort performance evaluations on electric vehicle conversion via simulations. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7794-7798. ISSN 1819-6608

Abu Hassan, Shukur and Gholami, Mehran and Ismail, Yob Saed and Mohd. Sam, Abdul Rahman (2015) Characteristics of concrete/CFRP bonding system under natural tropical climate. Construction And Building Materials, 77 . pp. 297-306. ISSN 0950-0618

Abubakar, Mu'Azu and Ahmad, Norhayati (2015) Comparison of three-parameter weibull statistical analysis of the flexural strength of denseband porous sintered clay. In: 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Bali, Indonesia.

Abubakar, Mu'Azu and Aliyu, Abubakar Baba and Ahmad, Norhayati (2015) Flexural strength analysis of dense and porous sintered clay using weibull probability distribution. In: Applied Mechanics and Materials, 2015.

Abubakar, Mu'Azu and Tamin, Mohd. Nasir and Ahmad, Norhayati (2015) A three parameter weibull of flexural strength variation of porous sintered clay. In: World Scientific and Engineering Academy and Society Conference, 27-29 June, 2015, Italy.

Abyn, Hassan and Rafiqul Islam, Mohammad and Jaswar, Koto and Mahmoudi, Amin and Siow, C. L. and Kader, A. S. A. (2015) Wave exciting forces of a free floating semi submersible in regular waves. Jurnal Teknologi, 74 (5). pp. 53-57. ISSN 0127-9696

Adeyemi, Ademola James and Mohd. Rohani, Jafri and Abdul Rani, Mat Rebi (2015) Interaction of body mass index and age in muscular activities among backpack carrying male schoolchildren. Work, 52 (3). pp. 677-686. ISSN 1051-9815

Adham, Ahmed Mohammed and Ghazali, Normah and Ahmad, Robiah (2015) Performance optimization of a microchannel heat sink using the Improved Strength Pareto Evolutionary Algorithm (SPEA2). Journal Of Engineering Thermophysics, 24 (1). pp. 86-100. ISSN 1796-2056

Adila, A. S. N. and Noordin, M. Y. and Wong, K. Y. and Izman, S. (2015) Modeling of spinning process for efficient production of hollow fiber membranes used in wastewater treatment. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22 - 24 September 2014, Johor Bahru, Johor.

Adiputra, Mohamad Fariz (2015) Risk control enhancement using safety climate factors for HIRARC method in steel product industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afandiyev, Fadai (2015) System dynamics model for remanufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Afifah, A. N. and Syahrullail, Samion and Nor Azwadi, Che Sidik (2015) Natural convection of aluminium oxide-water nanofluid. Jurnal Teknologi, 75 (11). pp. 161-167. ISSN 2180-3722

Ahmad, Arshad (2015) A semicontinuous approach for heterogeneous azeotropic distillation processes. In: Conference.

Ahmad, N. and Fadil, N. A. and Hashim, H. (2015) The effect of organic solvent (Ethanol) on electroless Ni-P deposition. In: 2014 36th IEEE International Electronics Manufacturing Technology Conference, IEMT 2014, 11 - 13 November 2014, Johor, Malaysia.

Ahmad, Norhayati and Idris, Mohd. Hasbullah and Moslemi, Navid and Farahany, Saeed and Ghandvar, Hamidreza (2015) Evaluation of the effect of sicp ratio on microstructural and dry sliding wear behavior of a356/xsicp composites. In: 4th International Conference on Advanced Manufacturing Technology, 18-20 Dec, 2015, United States.

Ahmad, Shaharudin (2015) A first principle approach for the strength analysis of a semi-swath vessel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Zaini and Abdullah, Mohamed Ruslan Uslan and Tamin, Mohd. Nasir (2015) Experimental and numerical studies of fiber metal laminate (FML) thin-walled tubes under impact loading. Advanced Structured Materials, 70 . pp. 433-443. ISSN 1869-8433

Ahmad @Mohamad, Md. Fauzi and Md. Ariff, Mohd. Shoki and Mohamad Zakwan @ Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Syed Abdul Rahman, Syed Saleh and Raja Abdullah, Tengku Aziz and Fadzil, Nukman (2015) The effect of demographics on Quality Management Principles of ISO 9001:2008 amongst Malaysia Hajj Pilgrims. In: 4th ICTMBE-International Conference on Technolgoy Management,Business and Entrepreneur, 24-25 Nov, 2015, Melaka, Malaysia.

Ahmad Fuad, Ahmad Faizal (2015) Safety assessment model of coastal passenger vessel in the perspective of life jacket compatibility. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad Shafie, Noor Emilia and Mohamed Kamar, Haslinda and Kamsah, Nazri (2015) CFD simulation of air temperature inside a bus passenger compartment. In: Applied Mechanics and Materials, 19-21 August, 2014, Switzerland.

Ahmad Shafie, Noor Emilia and Mohamed Kamar, Haslinda and Kamsah, Nazri (2015) CFD simulation of particulate matters inside a bus passenger compartment. International Journal of Mechanical and Mechatronics Engineering, 15 (3). pp. 28-36. ISSN 2227-2771

Ahmad Shafie, Noor Emilia and Mohamed Kamar, Haslinda and Kamsah, Nazri (2015) Reducing indoor air contaminants inside a bus passenger compartment. International Journal of Mechanical and Mechatronics Engineering, 15 (3). pp. 81-87. ISSN 2227-2771

Ahmad Zainuri, Mohamad Ihsan and Abdul Latiff, Zulkarnain and Muhamad Said, Mohd. Farid and Abdul Aziz, Azhar and Mohd. Perang, Mohd. Rozi (2015) The effect of bio-based additives on engine performance and emissions of petrol and diesel engine. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Ahmadipourroudposht, Mohaddeseh and Fallahiarezoudar, Ehsan and Mohd. Yusof, Noordin and Idris, Ani (2015) Application of response surface methodology in optimization of electrospinning process to fabricate (ferrofluid/polyvinyl alcohol) magnetic nanofibers. Materials Science & Engineering C-Materials For Biological Applications, 50 . pp. 234-241. ISSN 0928-4931

Ahmed, Osamah Zaid and Ani, Farid Nasir (2015) Simulation of a double effect solar absorption system for traditional house in Yemen. In: Applied Mechanics And Materials, 2015.

Ahmed, Y. M. and Ciortan, C. and Wnek, A. D. and Guedes Soares, C. (2015) Free surface flow simulation around a Wigley hull using viscous and potential flow approaches. Maritime Technology and Engineering – Guedes Soares & Santos (Eds) . pp. 985-992.

Aid, Siti Rahmah and Hamzah, Azura and Ambran, Sumiaty and Matsumoto, Satoru and Johari, Zaharah and Fuse, Genshu (2015) Effect of pulse number on dopant activation in silicon during shallow p+/n junction formation by non-melt excimer laser annealing. In: 2015 International Conference on Smart Material Research (ICSMR 2015), 21-22 Sep, 2015, Turkey.

Al-khafaji, Ali A. M. and Shaharuddin, Nik Mohd. Ridzuan and Mat Darus, Intan Zaurah (2015) Evolutionary algorithm for identification of a flexible single-link manipulator system. WSEAS Transactions on Systems and Control, 10 . pp. 58-75. ISSN 1991-8763

Al-Shamani, Ali Najah and Sopian, K. and Mohammed, Hussein A. and Mat, Sohif and Ruslan, Mohd. Hafidz and Abed, Azher M. (2015) Enhancement heat transfer characteristics in the channel with Trapezoidal rib-groove using nanofluids. Case Studies in Thermal Engineering, 5 . pp. 48-58. ISSN 2214-157X

Alawi, Omar A. and Che Sidik, Nor Azwadi and Mamat, Rizalman (2015) Performance analysis of nanorefrigerants in heated and rotating concentric and eccentric annulus cylinders. Jurnal Teknologi, 77 (8). pp. 91-97. ISSN 0127-9696

Alawi, Omar A. and Che Sidik, Nor Azwadi and Kherbeet, A. S. (2015) Nanorefrigerant effects in heat transfer performance and energy consumption reduction: A review. International Communications in Heat and Mass Transfer, 69 . pp. 76-83. ISSN 0735-1933

Alawi, Omer A. and Che Sidik, Nor Azwadi (2015) The effect of temperature and particles concentration on the determination of thermo and physical properties of SWCNT-nanorefrigerant. International Communications in Heat and Mass Transfer, 67 . pp. 8-13. ISSN 0735-1933

Alawi, Omer A. and Che Sidik, Nor Azwadi and Kherbeet, A. Sh. (2015) Measurements and correlations of frictional pressure drop of TiO2/R123 flow boiling inside a horizontal smooth tube. Intertiol Communications In Heat And Mass Transfer, 61 . pp. 42-48. ISSN 0735-1933

Alawi, Omer A. and Che Sidik, Nor Azwadi and Mohammed, H. A. (2015) Assisted and opposed mixed convective nanofluids flow over vertical backward facing step having a baffle. Journal of Computatiol and Theoretical noscience, 12 (9). pp. 2048-2061. ISSN 1546-1955

Alawi, Omer A. and Che Sidik, Nor Azwadi and Wah, Yen Tey (2015) A numerical study of heat transfer to turbulent separation nanofluid flow in an annular passage. Jurnal Teknologi, 77 (8). pp. 75-82. ISSN 2180–3722

Alawi, Omer A. and Sidik, Nor Azwadi Che and Beriache, M'hamed (2015) Applications of nanorefrigerant and nanolubricants in refrigeration, air-conditioning and heat pump systems: A review. International Communications In Heat And Mass Transfer, 68 . pp. 91-97. ISSN 0735-1933

Alawi,, Omer A. and Che Sidik, Nor Azwadi and Dawood, H. K. (2015) Numerical study of turbulent mixed convection of nanofluids in three-dimensional horizontal concentric annuli. Journal of Computational and Theoretical Nanoscience, 12 (9). pp. 2067-2076. ISSN 1546-1955

Alexandrov, Sergei Evgenievich and Mustafa, Yusof (2015) Quasi-static axially symmetric viscoplastic flows near very rough walls. Applied Mathematical Modelling, 39 (15). pp. 4599-4606. ISSN 0307904X

Ali, Arifah and Maimun, Adi and Ahmed, Yasser M. and Rahimuddin, Rahimuddin (2015) Resistance prediction of innovative semi SWATH design concept in shallow water. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Ali, Arifah and Maimun, Adi and Ahmed, Yasser M. and Rahimuddin, Rahimuddin and A. Ghani, Mohamad Pauzi (2015) Experimental analysis on flow around fin assisted semi SWATH. Jurnal Teknologi, 74 (5). pp. 91-95. ISSN 2180-3722

Ali, Derakhshanasl (2015) Improved covariance matrix evolution strategy algorithm for stochastic dynamic unequal area facility layouts in an open area. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Rosmah and Haron, Habibah Norehan and Salim, Kamilah Radin and Abdullah, Morina and Mohamed, Zainai (2015) Challenges in implementing engineering technology education in Malaysia. In: The 2nd International Conference on Human Capital and Knowledge Management 2015, 11-13 Feb, 2015, Bandung, Indonesia.

Ali, Yasir Hassan and Abd. Rahman, Roslan and Raja Hamzah, Raja Ishak (2015) Artificial neural network model for monitoring oil film regime in spur gear based on acoustic emission data. Shock and Vibration, 2014 . ISSN 1070-9622

Ali A., Header (2015) Experimental study of acoustic emission technique for concrete defect detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali Akhbar, Mohd. Faizal (2015) Enhancement of heat transfer coefficient in an automobile radiator by using nanocoolant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Arman (2015) Improved design solution for motion resistance problem through integration of robust design and theory of inventive principle (TRIZ). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alipour, R. and Farokhi Nejad, Ali and Izman, S. (2015) The reliability of finite element analysis results of the low impact test in predicting the energy absorption performance of thin-walled structures. Journal of Mechanical Science and Technology, 29 (5). pp. 2035-2045. ISSN 1738-494X

Almasi, Davood (2015) Deposition of the hydroxyapatite particles on the polyether ether ketone surface for orthopaedic applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Almasi, Davood and Izman, Sudin and Sadeghi, Morteza and Iqbal, Nida and Roozbahani, Fatemeh and Krishnamurithy, Genasan and Kamarul, T. and Abdul Kadir, Mohammed Rafiq (2015) In vitro evaluation of bioactivity of chemically deposited hydroxyapatite on polyether ether ketone. International Journal of Biomaterials, 2015 . ISSN 1687-8787

Alrahman Jawad, Lamyaa Abd. (2015) Factors effecting the acoustic properties of date palm fiber. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alwan, Raid Abid and Abdul Wahid, Mazlan and Mohd. Yasin, Mohd. Fairus and Al-Taie, Arkan Kh Al Yasari and Abuelnuor, Abdeen Ali Abuelnuor (2015) Effects of equivalence ratio on asymmetric vortex combustion in a Low NOx Burner. International Review Of Mechanical Engineering, 9 (5). pp. 476-483. ISSN 1970-8734

Amin, Z. and Mohammad, R. and Abdul Aziz, S. and Othman, N. (2015) Workers’ safety awareness level on hand related injury accident in metal fabrication industry. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Amin, Zamree and Mohammad, Roslina and Abdul Aziz, Sa'ardin (2015) Hand related injury accident trend in metal fabrication industry. In: 4th International Conference on Engineering Business Management, 22-23 August, 2015, Kuala Lumpur, Malaysia.

Amran, Nur Aireen (2015) Integrated system of automatic identification system (AIS) and radar fot port traffic management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Amran, Nur Aireen and Koto, Jaswar and Maimun, Adi (2015) Integration system of automatic identification system and radar for port traffic management. Jurnal Mekanikal, 38 (1). pp. 32-45. ISSN 2289-3866

Anah, Syafwan (2015) Vessel traffic simulation at container port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Andwari, Amin Mahmoudzadeh and Abdul Aziz, Azhar and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkanai and Ghanaati, Ali (2015) Influence of hot burned gas utilization on the exhaust emission characteristics of a controlled auto-ignition two-stroke cycle engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2396-2404. ISSN 2229-8649

Ani, F. N. (2015) Utilization of bioresources as fuels and energy generation. In: Electric Renewable Energy Systems. Elsevier Inc., pp. 140-155. ISBN 978-012804448-3

Ani, Farid Nasir and Mat Junoh, Muhammad and Ab. Muis, Zarina (2015) Granular-activated carbon from Mukah coal using carbon dioxide activation. Jurnal Teknologi, 75 (11). pp. 123-127. ISSN 2180-3722

Anjomshoae, Ali and Hassan, Adnan and Samuel, Cherian and Wong, Kuan Yew (2015) Effect of information sharing and capacity adjustment on healthcare service supply chain: the case of flood disaster. In: 6th International Conference on Industrial Engineering and Operations Management in Kuala Lumpur, IEOM 2016, 8-10 March 2016, Kuala Lumpur, Malaysia.

Anuar, Abdul Rahim Shar and Muhamad Said, Mohd. Farid and Abdul Aziz, Azhar and Lazim, Zulfaqih (2015) Investigation into the selection of an appropriate piston head geometry for a spark ignition engine equipped direct-fuel injector. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Aparow, Vimal Rau and Hudha, Khisbullah and Ahmad, Fauzi and Jamaluddin, Hishamuddin (2015) Modeling and validation of electronic wedge brake mechanism for vehicle safety system. Jurnal Teknologi, 75 (1). pp. 183-191. ISSN 2180-3722

Arizal, Mohd. Amirul Amin and Azman, A. H. and Mohd. Jaafar, Mohammad Nazri and Wan Omar, Wan Zaidi (2015) Combustion performance of jatropha biodiesel in an oil burner system. Jurnal Teknologi, 77 (8). pp. 47-51. ISSN 0127-9696

Arizal, Mohd. Amirul Amin and Mohd. Jaafar, Mohammad Nazri (2015) Effect of varying the retainer angle on the performance of oil burner. Jurnal Teknologi, 72 (4). pp. 91-97. ISSN 0127-9696

Ashokkumar, Veeramuthu and Salam, Zainal and Sathishkumar, Palanivel and Hadibarata, Tony and Mohd. Yusoff, Abdull Rahim and Ani, Farid Nasir (2015) Exploration of fast growing botryococcus sudeticus for upstream and downstream process in sustainable biofuels production. Journal of Cleaner Production, 92 . pp. 162-167. ISSN 0959-6526

Ashokkumar, Veeramuthu and Salam, Zainal and Tiwari, Onkar Nath and Chinnasamy, Senthil and Mohammed, Sudheer and Ani, Farid Nasir (2015) An integrated approach for biodiesel and bioethanol production from Scenedesmus bijugatus cultivated in a vertical tubular photobioreactor. Energy Conversion and Management, 101 . pp. 778-786. ISSN 0196-8904

Asl, Ali Derakhshan and Wong, Kuan Yew (2015) Solving unequal area static facility layout problems by using a modified genetic algorithm. In: Proceedings of the 2015 10th IEEE Conference on Industrial Electronics and Applications, 15-17 Jun, 2015, New Zealand.

Asl, Ali Derakhshan and Wong, Kuan Yew (2015) Solving unequal-area dynamic facility layout problems based on slicing tree representation and simulated annealing. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014, 28 - 30 May 2014, Penang, Malaysia.

Asral, Asral (2015) High amplitude wave liner effects on journal bearing performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Assadian, Mahtab and Rezazadeh Shirdar, Mostafa and Idris, Mohd. Hasbullah and Sudin, Izman and Almasi, Davoud and Taheri, Mohammad Mahdi and Abdul Kadir, Mohammed Rafiq (2015) Optimisation of electrophoretic deposition parameters in coating of metallic substrate by hydroxyapatite using response surface methodology. Arabian Journal for Science and Engineering, 40 (3). pp. 923-933. ISSN 1319-8025

Aung, Lwin Moe and Mohamad Sapawi, Siti Aminah and Abu, Aminudin (2015) Mechanical behavior of hybrid jute/flax epoxy composite. In: 7th International Workshop on Plasma Application and Hybrid Functional Materials, 7-10 March, 2015, Hong Kong.

Ayatollahi, Majid Reza and Razavi, Seyed Mohammad Javad and Yahya, Mohd. Yazid (2015) Mixed mode fatigue crack initiation and growth in a CT specimen repaired by stop hole technique. Engineering Fracture Mechanics, 145 . pp. 115-127. ISSN 0013-7944

Ayatollahi, Majid Reza and Yahya, Mohd Yazid and Karimzadeh, Atefeh and Nikkhooyifar, M. and Ayob, Amran (2015) Effects of temperature change and beverage on mechanical and tribological properties of dental restorative composites. Materials Science And Engineering C, 54 . pp. 69-75. ISSN 0928-4931

Ayatollahi, Majid Reza and Yahya, Mohd. Yazid and Asgharzadeh Shirazi, Hadi and Abu Hassan, Shukur (2015) Mechanical and tribological properties of hydroxyapatite nanoparticles extracted from natural bovine bone and the bone cement developed by nano-sized bovine hydroxyapatite filler. Ceramics International, 41 (9). pp. 10818-10827. ISSN 0272-8842

Ayo, Samuel Adinoyi and Mohd. Ghazali, Normah and Mansor, Shuhaimi (2015) Outdoor ventilation performance of various configurations of a layout of two adjacent buildings under isothermal conditions. Building Simulation, 8 (1). pp. 81-98. ISSN 1996-3599

Azadnia, Amir Hossein and Mat Saman, Muhamad Zameri and Wong, Kuan Yew (2015) Sustainable supplier selection and order lot-sizing: an integrated multi-objective decision-making process. International Journal of Production Research, 53 (2). pp. 383-408. ISSN 2074-8523

Aziz, Amir and Mamat, Rizalman and Wan Ali, Wan Khairuddin and Mohd. Perang, Mohd. Rozi (2015) Review on typical ingredients for ammonium perchlorate based solid propellant. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6188-6191. ISSN 1819-6608

Azman, Nurul Farhanah and Samion, Syahrullail and Sapawe, Norzahir (2015) Tribological performance of raw and chemically modified RBD palm kernel. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Pulau Pinang, Malaysia.

Aznam, Siti Nur Amalina (2015) Combustion visualization and measurement in a closed vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aznam, Siti Nur Amalina and Saat, Aminuddin (2015) Pressure rise generation by the combustion of methane-air in a closed vessel. In: Malaysian Technical Universities Conference on Engineering and Technology 2015, 11-13 Oct 2015, Johor Bahru, Malaysia.

Bagaber, Salem Salah Abdullah (2015) Preliminary study on bricks drying process using microwave technology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagheri, Arash (2015) Real coded GA for tuning of semi-active railway vehicle suspension system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagheri, Mohammad Reza and Mehdigholi, Hamid and Seif, Mohammad Said and Yaakob, Omar (2015) An experimental and numerical prediction of marine propeller noise under cavitating and non- cavitating conditions. Brodogradnja, 66 (2). pp. 29-45. ISSN 0007-215X

Bahador, A. and Hamzah, E. and Mamat, M. F. (2015) Effect of filler metals on the mechanical properties of dissimilar welding of stainless steel 316L and carbon steel A516 GR 70. Jurnal Teknologi, 75 (7). pp. 61-65. ISSN 0127-9696

Baharun, A. Tarmizi and Maimun, Adi and Ahmed, Yasser M. and Mobassher, M. and Nakisa, M. (2015) Comparison of numerical simulation with experimental result for small scale one seater Wing in Ground Effect (WIG) craft. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014, 28 - 30 May 2014, Penang, Malaysia.

Bahlol, Nabeel Najm (2015) Effect of post treatment parameters on corrosion resistance of Ti-13Nb- 13Zr coated with hydroxyapatite via electrophoretic deposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Abdul Kadir, Mohammed Rafiq and Daroonparvar, Mohammadreza and Medraj, M. (2015) Corrosion and mechanical performance of double-layered nano-Al/PCL coating on Mg-Ca-Bi alloy. Vacuum, 119 . pp. 95-98. ISSN 0042-207X

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Abdul Kadir, Mohammed Rafiq and Saud, Safaa Najah and Kasiri-Asgarani, Masoud and Ebrahimi-Kahrizsangi, R. (2015) The mechanical properties and corrosion behavior of double-layered nano hydroxyapatite-polymer coating on Mg-Ca alloy. Journal of Materials Engineering and Performance, 24 (10). pp. 4010-4021. ISSN 1059-9495

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Farahany, Saeed and Staiger, Mark P. (2015) The mechanical properties and corrosion behavior of quaternary Mg-6Zn-0.8Mn-xCa alloys. Journal of Materials Engineering and Performance, 24 (2). pp. 598-608. ISSN 1059-9495

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Ismail, Ahmad F. and Sharer, Zalilah Sharer and Abdul Kadir, Mohammed Rafiq and Daroonparvar, Mohammadreza R. and Saud, Safaa Najah and Medraj, Mamoun (2015) Synthesis and corrosion behavior of a hybrid bioceramic-biopolymer coating on biodegradable Mg alloy for orthopaedic implants. Journal of Alloys and Compounds, 648 . pp. 1067-1071. ISSN 0925-8388

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Saud, Safaa Najah and Medraj, Mamoun (2015) Effect of electrodeposition parameters on the microstructure and corrosion behavior of DCPD coatings on biodegradable Mg-Ca-Zn alloy. International Journal of Applied Ceramic Technology, 12 (5). pp. 1054-1064. ISSN 1546-542X

Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Ismail, Ahmad Fauzi and Daroonparvar, Mohammadreza and Kasiri Asgarani, Masoud and Jabbarzare, Saeid and Medraj, Mamoun (2015) Microstructural, mechanical properties and corrosion behavior of plasma sprayed NiCrAlY/nano-YSZ duplex coating on Mg-1.2Ca-3Zn alloy. Ceramics International, 41 (10). pp. 15272-15277. ISSN 0272-8842

Bakhtiarinejad, Marjan (2015) Numerical study on the influence of various nanofluids on the efficiency of flat-plate solar collectors (FPSC). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bakri, Adnan (2015) Total productive maintenance framework for automotive companies in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Balaji, Rajoo and Yaakob, Omar (2015) Optimisation of a waste heat exchanger for ballast water treatment. Scientia Iranica, 22 (3). pp. 871-882. ISSN 1026-3098

Balaji, Rajoo and Yaakob, Omar and Kho, King Koh and Adnan, Faizul Amri and Ismail, Nasrudin and Ahmad, Badruzzaman and Ismail, Mohd. Arif and Yiow, Ru Vern (2015) Comparison of heat exchanger designs for ship ballast water heat treatment system. Jurnal Teknologi, 77 (8). pp. 13-19. ISSN 0127-9696

Baloch, Abdul Hameed (2015) Effect of different machining parameters on surface roughness of aluminum alloys based on Si and Mg content. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bundu, Alimamy and Mat, Shabudin and Ishak, I. S. (2015) Effect of control surface and reynolds number on flow separation of generic light aircraft. In: The 2nd International Conference on Ocean Mechanical and Aerospace - Science & Engineering, 21 Oct, 2015, Indonesia.

Che Kob, Mohd. Salman and Supriyo, Bambang and Tawi, Kamarul Baharin and Mazali, Izhari Izmi (2015) Engagement slip controller development based on actuator displacement for an electro-mechanical friction clutch system. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2664-2674. ISSN 2229-8649

Che Puteh, Rosnizam (2015) Simulation of exhaust waste energy recovery potentials using electric turbo compound in a turbocharged gasoline engine. Masters thesis, Universiti Teknologi Malaysia.

Che Sidik, Nor Azwadi and Mohd. Yazid, Muhammad Noor Afiq Witri and Mamat, Rizalman (2015) A review on the application of nanofluids in vehicle engine cooling system. International Communications in Heat and Mass Transfer, 68 . pp. 85-90. ISSN 0735-1933

Che Sidik, Nor Azwadi and Yassin, M. M. and Musa, Mutah N. (2015) Turbulent-forced convective heat transfer and pressure drop analysis of FE3O4 magnetic nanofluid in a circular microchannel. Jurnal Teknologi, 75 (11). pp. 11-15. ISSN 0127-9696

Chegeni, Ali (2015) A system dynamic model for decision support system in lean construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cheng, Tung Chong and Shu, Shiung Lam and Hochgreb, Simone (2015) Combustion performance of a counter-rotating double swirl flame burner under stratified burning condition. Chemical Engineering Transactions, 45 . pp. 193-198. ISSN 2283-9216

Chia, Zhong Yi and Haji Ani, Farid Nasir (2015) Performance of an improved ejector air-conditioning system. Jurnal Mekanikal, 38 . pp. 63-72. ISSN 2289-3866

Chofreh, Abdoulmohammad Gholamzadeh (2015) A master plan for the implementation of sustainable enterprise resource planning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Shaharoun, Awaluddin Mohamed and Ismail, Syuhaida (2015) A review on sustainability transformation roadmaps using project management methodology. Advanced Science Letters, 21 (2). pp. 133-136. ISSN 1936-6612

Chong, Cheng Tung and Hochgreb, Simone (2015) Effect of atomizing air flow on spray atomization of aninternal-mix twin-fluid atomizer. Atomization And Sprays, 25 (8). pp. 657-673. ISSN 1044-5110

Chong, Cheng Tung and Hochgreb, Simone (2015) Fundamental spray combustion characteristics of rapeseed biodiesel, diesel and blend. In: 7th International Conference on Applied Energy, ICAE 2015, 28 - 31 March 2015, Abu Dhabi, United Arab Emirates.

Chong, Cheng Tung and Hochgreb, Simone (2015) Measurements of non-reacting and reacting flow fields of a liquid swirl flame burner. Chinese Journal of Mechanical Engineering, 28 (2). pp. 394-401. ISSN 1000-9345

Chong, Cheng Tung and Ng, Jo Han and Ahmad, Solehin and Rajoo, Srithar (2015) Oxygenated palm biodiesel: Ignition, combustion and emissions quantification in a light-duty diesel engine. Energy Conversion And Magement, 101 . pp. 317-325. ISSN 0196-8904

Chong, Chengtung and Hochgreb, Simone (2015) Spray and combustion characteristics of biodiesel: non-reacting and reacting. International Biodeterioration and Biodegradation, 102 (1). pp. 353-360. ISSN 0964-8305

Chong, William Woei Fong and Rahnejat, Homer (2015) Nanoscale friction as a function of activation energies. Surface Topography-Metrology and Properties, 3 (4). 044002-044002. ISSN 2051-672X

Chua, Yong Ping (2015) Optimization of laser cutting parameter of acrylic by using DMAIC approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Dahalan, Md. Nizam and Mansor, Shuhaimi and Ali, Muhammad Muzakkir Faiz (2015) Study the orifice effects of a synthetic jet actuator design. Jurnal Teknologi, 77 (8). pp. 99-105. ISSN 0127-9696

Dambatta, M. S. and Murni, N. S. and Sudin, Izman and Kurniawan, Denni and Froemming, Gabriele R. A. and Hermawan, Hendra (2015) In vitro degradation and cell viability assessment of Zn-3Mg alloy for biodegradable bone implants. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 229 (5). pp. 335-342. ISSN 0954-4119

Dambatta, M. S. and Sudin, Izman and Kurniawan, Denni and Saeed, Farahany and Yahaya, Bashir and Hermawan, Hendra (2015) Influence of thermal treatment on microstructure, mechanical and degradation properties of Zn-3Mg alloy as potential biodegradable implant material. Materials and Design, 85 . pp. 431-437. ISSN 0264-1275

Dambatta, M. S. and Sudin, Izman and Yahaya, Bashir and Lim, Joong Yeon and Kurniawan, Denni (2015) Mg-based bulk metallic glasses for biodegradable implant materials: A review on glass forming ability, mechanical properties, and biocompatibility. Journal of Non-Crystalline Solids, 426 . pp. 110-115. ISSN 0022-3093

Dambatta, Murtala Sule (2015) Influence of heat treatment and severe plastic deformation (SPD) ON Zn-3Mg alloy properties for bio-implant application. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Darlis, Nofrizalidris and Shafii, Nadia Shaira and Dillon, Jeswant and Osman, Kahar and Md. Khudzari, Ahmad Zahran (2015) Novel straight type aortic cannula with spiral flow inducing design. In: Applied Mechanics and Materials, 2015.

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza (2015) Fabrication and properties of triplex NiCrAlY/nano Al2O3 center dot 13%TiO2/nano TiO2 coatings on a magnesium alloy by atmospheric plasma spraying method. Journal of Alloys and Compounds, 645 . pp. 450-456. ISSN 0925-8388

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Adabi, Mohsen and Hamzah, Esah and Kamali, Hussein Ali (2015) Improvement of corrosion resistance of binary Mg-Ca alloys using duplex aluminum-chromium coatings. Journal of Materials Engineering and Performance, 27 (7). pp. 2614-2627. ISSN 1059-9495

Daroonparvar, Mohammadreza and Mat Yajid, Muhamad Azizi and Mohd. Yusof, Noordin and Bakhsheshi-Rad, Hamid Reza and Hamzah, Esah and Mardanikivi, Tina (2015) Deposition of duplex MAO layer/nanostructured titanium dioxide composite coatings on Mg-1%Ca alloy using a combined technique of air plasma spraying and micro arc oxidation. Journal of Alloys And Compounds, 649 . pp. 591-605. ISSN 0925-8388

Dawood, H. K. and Mohammed, Hussein A. and Che Sidik, Nor Azwadi and Munisamy, Kannan M. and Abdul Wahid, Mazlan (2015) Forced, natural and mixed-convection heat transfer and fluid flow in annulus: a review. International Communications in Heat and Mass Transfer, 62 . pp. 45-57. ISSN 0735-1933

Dawood, H. K. and Mohammed, Hussein A. and Che Sidik, Nor Azwadi and Munisamy, Kannan M. (2015) Numerical investigation on heat transfer and friction factor characteristics of laminar and turbulent flow in an elliptic annulus utilizing nanofluid. International Communications in Heat and Mass Transfer, 66 . pp. 148-157. ISSN 0735-1933

Dawood, Hasan I. and Mohammed, Kahtan S. and Rahmat, Azmi and Uday, M. B. (2015) The influence of the surface roughness on the microstructures and mechanical properties of 6061 aluminium alloy using friction stir welding. Surface and Coatings Technology, 270 . pp. 272-283. ISSN 0257-8972

Dawood, Hasan I. and Mohammed, Kahtan Sadiq and Rahmat, Azmi and Uday, M. B. (2015) Effect of small tool pin profiles on microstructures and mechanical properties of 6061 aluminum alloy by friction stir welding. Transactions Of Nonferrous Metals Society Of Chi, 25 (9). pp. 2856-2865. ISSN 1003-6326

Dzulkifli, Mohd. Haziq and Yahya, Mohd. Yazid and Abdul Majid, Rohah (2015) Development of rigid bio-nanocomposite polyurethane foam for load bearing application: Effect of surfactant composition. Jurnal Teknologi, 72 (4). pp. 99-101. ISSN 0127-9696

Efkirn, Esam Abubaker and Mat Lazim, Tholudin and Wan Omar, W. Z. and Nik Mohd., N. A. R. and Takeyeldein, M. M. (2015) Aerodynamic analysis of horizontal axis wind turbine using blade element momentum theory for low wind speed conditions. In: The 2nd Conference on Ocean, Mechanical and Aerospace -Science and Engineering, 21-22 Oct, 2015, Indonesia.

Elbatran, A. H. and Abdel Hamed, Mohamed Walid and Yaakob, Omar and Abdel Razak, Yasser Mohamed Ahmed and Ismail, M. Arif (2015) Hydro power and turbine systems reviews. Jurnal Teknologi, 74 (5). pp. 83-90. ISSN 2180-3722

Elbatran, A. H. and Yaakob, Omar and Ahmed, Yasser Mohamed and Jalal, M. Rajali (2015) Novel approach of bidirectional diffuser-augmented channels system for enhancing hydrokinetic power generation in channels. Renewable Energy, 83 . pp. 809-819. ISSN 0960-1481

Elbatran, A. H. and Yaakob, Omar and Ahmed, Yasser Mohamed and Shabara, H. M. (2015) Numerical investigation of curvature and torsion effects on water flow field in helical rectangular channels. Journal of Engineering Science and Technology, 10 (7). pp. 827-840. ISSN 1823-4690

Elbatran, A. H. and Yaakob, Omar and Ahmed, Yasser Mohamed and Shabara, H. M. (2015) Operation, performance and economic analysis of low head micro-hydropower turbines for rural and remote areas: A review. Renewable and Sustaible Energy Reviews, 43 . pp. 40-50. ISSN 1364-0321

Elmunafi, Mohamed Handawi Saad and Kurniawan, D. and Noordin, M. Y. (2015) Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22 - 24 September 2014, Johor Bahru, Malaysia.

Elmunafi, Mohamed Handawi Saad and Yusof, Noordin Mohd. and Kurniawan, Denni (2015) Effect of cutting speed and feed in turning hardened stainless steel using coated carbide cutting tool under minimum quantity lubrication using castor oil. Advances in Mechanical Engineering, 7 (8). ISSN 1687-8132

Elsherbeiny, Mohamed Mohamed Takeyeldein (2015) Analysis of low wind speed small hawt using blade element momentum theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Biosciences and Medical Engineering.

Fadil, N. A. and Rosdi, A. A. (2015) Effect of pH on electroless nickel deposition on alumina substrates for chip resistor application. In: 2014 36th IEEE International Electronics Manufacturing Technology Conference, IEMT 2014, 11 - 13 November 2014, Johor, Malaysia.

Fadil, N. A. and Yusof, S. Z. and Abu Bakar, T. A. and Ourdjini, A. (2015) Tin whiskers behaviour on immersion tin surface finish at high temperature and humidity condition. In: Proceeding of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Fadil, Nor Akmal (2015) Review: nickel base nanoparticles as new nanoparticulate of non-precious metal for future application. In: Asian Conference on Engineering and Natural Sciences (ACENS2015), 3-5 Feb, 2015, Tokyo.

Fadil, Nor Akmal and Mior Shahidin, Shazatul Akmaliah (2015) Effect of hydrofluoric acid etching on electroless copper plating on silicon wafer. In: 4th International Conference on Advanced Manufacturing Technology (ICAMT 2015), 20-22 Sept, 2015, Johor Bahru, Johor.

Fadil, Nor Akmal and Yusof, Siti Zahira and A. B. Kahar, Mohamad Nawawi and Abu Bakar, TutyAsma (2015) Effect of external stresses by bending on Sn whiskers formation and growth on immersion Sn surface finish. In: The World Virtual Conference on Applied Sciences and Engineering Applications, 27-29 March, 2015, Johor Bahru, Malaysia.

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Idris, Ani and Mohd. Yusof, Noordin (2015) A review of: application of synthetic scaffold in tissue engineering heart valves. Materials Science and Engineering C, 48 . pp. 556-565. ISSN 0928-4931

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Mohd. Yusof, Noordin and Idris, Ani (2015) Fabrication (ferrofluid/polyvinyl alcohol) magnetic nanofibers via co-axial electrospinning. Journal of Dispersion Science and Technology, 36 (1). pp. 28-31. ISSN 0193-2691

Fang, Wiliam Woei Chong and Ng, Jo-Han (2015) Biodiesel lubricity: an atomic-scale frictional characterisation approach. In: International Conference in Challenges in Environmental Science & Engineering (CESE) 2015, 28 Sept-2 Oct, 2015, Australia.

Farahany, Saeed and Idris, Mohd. Hasbullah and Ourdjini, Ali (2015) Effect of bismuth and strontium interaction on the microstructure development, mechanical properties and fractography of a secondary Al-Si-Cu-Fe-Zn alloy. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 621 . pp. 28-38. ISSN 0921-5093

Farahany, Saeed and Idris, Mohd. Hasbullah and Ourdjini, Ali and Faris, Fadi and Ghandvar, Hamidreza (2015) Evaluation of the effect of grain refiners on the solidification characteristics of an Sr-modified ADC12 die-casting alloy by cooling curve thermal analysis. Journal of Thermal Analysis and Calorimetry, 119 (3). pp. 1593-1601. ISSN 1388-6150

Fareeduddin, M. and Hassan, Adnan and Syed, M. N. and Selim, S. Z. (2015) The impact of carbon policies on closed-loop supply chain network design. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22 - 24 September 2014, Johor Bahru, Malaysia.

Farhanah, A. N. and Samion, Syahrullail and Musa, Md. Nor and Bahak, M. Z. (2015) Modification of RBD palm kernel and RBD palm stearin oil with ZDDP additive addition. Jurnal Teknologi, 74 (10). pp. 125-126. ISSN 2180-3722

Faridmehr, Iman and Tahir, Mahmood Md. and Osman, Mohd. Hanim and Nejad, Ali Farokhi and Hodjati, Reza (2015) An experimental investigation of stiffened cold-formed C-channels in pure bending and primarily shear conditions. Thin-Walled Structures, 96 . pp. 39-48. ISSN 0263-8231

Fatihhi, S. J. and Harun, Muhamad Noor and Abdul Kadir, Mohammed Rafiq and Abdullah, Jaafar and Kamarul, T. and Öchsner, Andreas and Syahrom, Ardiyansyah (2015) Uniaxial and multiaxial fatigue life prediction of the trabecular bone based on physiological loading: a comparative study. Annals of Biomedical Engineering, 43 (10). pp. 2487-2502. ISSN 0090-6964

Fitriadhy, Ahmad and Yasukawa, H. and Abdul Malik, Adi Maimun (2015) Theoretical and experimental analysis of a slack towline motion on tug-towed ship during turning. Ocean Engineering, 99 . pp. 95-106. ISSN 2784-343

Foo, Jin Hoe and Noor Azizy, Noor Amira Syahida and Redzuan, Norizah and Zakaria, Khidzir (2015) Wettability effect and performance of nano-columnar DLC Coating via advancing sessile drop method in an ambient environmnet. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Fouladinejad, Nariman and Abdul Jalil, Mohamad Kasim and Mohd. Taib, Jamaludin and Nejad, Nima Fouladi (2015) Towards realism in an intelligent car's driving behavior using fuzz inference system. International Journal of Computer Theory and Engineering, 7 (3). pp. 187-190. ISSN 1793-8201

Fouladinejad, Nima and Taib, Jamaludin and Abd. Jalil, Mohamad Kasim (2015) Development of a realistic driving behavior by means of fuzzy inference system. Jurnal Teknologi, 74 (10). pp. 69-77. ISSN 0127-9696

Galankashi, Masoud Rahiminezhad and Chegeni, Ali and Soleimanynanadegany, Amin and Memari, Ashkan and Anjomshoae, Ali and Syed Ahmad Helmi, Syed Ahmad Helmi and Dargi, Ahmad (2015) Prioritizing green supplier selection criteria using Fuzzy Analytical Network Process. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22 - 24 September 2014, Johor Bahru, Malaysia.

Ganjeh Kaviri, Abdol Saeid and Mohd. Jaafar, Mohammad Nazri and Hosseini, Seyed Ehsan (2015) Optimization and the effect of steam turbine outlet quality on the output power of a combined cycle power plant. Energy Conversion and Management, 89 . pp. 231-243. ISSN 0196-8904

Ghanaati, Ali and Mat Darus, Intan Zaurah and Muhammad Said, Mohd. Farid and Andwari, Amin Mahmoudzadeh (2015) A mean value model for estimation of laminar and turbulent flame speed in spark-ignition engine. International Journal of Automotive and Mechanical Engineering, 11 (1). pp. 2224-2234. ISSN 2229-8649

Ghandvar, Hamidreza and Farahany, Saeed and Idris, Jamaliah (2015) Wettability enhancement of SiCp in cast A356/SiCp composite using semisolid process. Materials and Manufacturing Processes, 30 (12). pp. 1442-1449. ISSN 1042-6914

Ghazali, Ahmad Dairobi (2015) Experimental analysis of pulse detonation engine fuelled by biogas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gholami, Hamed and Mat Saman, Muhammad Zameri and Sharif, Safian and Mohd. Zakwa @ Zakuan, Norhayati (2015) A CRM strategic leadership towards sustainable development in student relationship management: SD in higher education. In: Procedia Manufacturing, 4-6 Feb, 2015, Indonesia.

Gohari, Soheil and Sharifi, Shokrollah and Vrcelj, Zora and Yahya, Mohd. Yazid (2015) First-ply failure prediction of an unsymmetrical laminated ellipsoidal woven GFRP composite shell with incorporated surface-bounded sensors and internally pressurized. Composites Part B: Engineering, 77 . pp. 502-518. ISSN 1359-8368

Golshan, Abolfazl and Ghodsiyeh, Danial and Izman, Sudin (2015) Multi-objective optimization of wire electrical discharge machining process using evolutionary computation method: Effect of cutting variation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229 (1). pp. 75-85. ISSN 0954-2299

H., Norafifah and Noordin, M. Y. and Wong, K. Y. and Izman, S. and Ahmad, A. N. A. (2015) A study of operational factors for reducing the Fouling of hollow fiber membranes during wastewater filtration. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22 - 24 September 2014, Johor Bahru, Malaysia.

Hadi, A. W. A. and Kadir, M. R. A. and Harun, M. N. and Syahrom, A. (2015) The influence of peg designs on glenoid component: a finite element study. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Penang, Malaysia.

Hadji, Saif Eddine and Kazi, Suhail and Tang, Howe Hing and Mohamed Ali, Mohamed Sultan (2015) A review: Simultaneous localization and mapping algorithms. Jurnal Teknologi, 73 (2). pp. 25-29. ISSN 0127-9696

Hadji, Saif Eddine and Tang, Howe Hing and Khattak, Muhammad Adil and Mohamed Ali, Mohamed Sultan and Kazi, Suhail (2015) 2D feature extraction in sensor coordinates for laser range finder. In: 15th International Conference on. Robotics, Control and Manufacturing Technology (ROCOM '15), 23-25 April, 2015, Kuala Lumpur, Malaysia.

Hajabdollahi, Hassan and Ganjehkaviri, Abdolsaeid and Jaafar, Mohammad (2015) Thermo-economic optimization of RSORC (regenerative solar organic Rankine cycle) considering hourly analysis. Energy, 87 . pp. 369-380. ISSN 0360-5442

Hajabdollahi, Hassan and Ganjehkaviri, Abdolsaeid and Mohd. Jaafar, Mohammad Nazri (2015) Assessment of new operational strategy in optimization of CCHP plant for different climates using evolutionary algorithms. Applied Thermal Engineering, 75 . pp. 468-480. ISSN 1359-4311

Hamedi, M. and Salleh, S. H. and Mohammad-Rezazadeh, I. and Astaraki, M. and Mohd. Noor, A. (2015) Asynchronous multiclass mental tasks classification through very fast Versatile elliptic basis function neural network. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8 - 10 December 2014, Kuala Lumpur, Malaysia.

Hamid, M. F. A. and Tamin, M. N. (2015) A review of computational damage mechanics of mass transport in solder joint. In: 2014 36th IEEE International Electronics Manufacturing Technology Conference, IEMT 2014, 11 - 13 November 2014, Johor, Malaysia.

Hamidi, Ehsan and Fazeli, Alireza and Mat Yajid, Muhamad Azizi and Che Sidik, Nor Azwadi (2015) Materials selection for hip prosthesis by the method of weighted properties. Jurnal Teknologi, 75 (11). pp. 1-9. ISSN 2180-3722

Hamzah, Afiqah and Ali Abuelnour, Abuelnuor Abdeen and Abdul Wahid, Mazlan (2015) Low-NOX combustion of biogas from palm oil mill effluent using flameless combustion. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka, Malaysia.

Haron, Surhan Jamil (2015) Analysis of marine incidents in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hasbullah, Nurul Ai'zzah (2015) Effect of heat treatment on the microstructures and corrosion behaviour of quaternary mg-2.2zn-3.7re-0.5ca alloys for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hashim, Azlina N. and Yaakob, O. B. and Koh, Khoking and Ismail, Nasrudin and Ahmed, Yasser Mohamed (2015) Review of micro-bubble ship resistance reduction methods and the mechanisms that affect the skin friction on drag reduction from 1999 to 2015. Jurnal Teknologi, 74 (5). pp. 105-114. ISSN 0127-9696

Hashim, Jasmi and Ahmad, Norhayati and Nakamura, Yuzo and Md. Salmin, Fakhrullah and Abubakar, Mu'Azu and Mohd. Noor, Siti Fawziah and Mohd. Zaidan, Nurhanna (2015) Clay based ceramic membrane for heavy metal removal from effluent lake water. In: 13th Global Conference on Sustainable Manufacturing, 16-18 Sept, 2015, Vietnam.

Hassan, Adnan and Rosli, Noni Rosyani (2015) Improving process quality in friction welding for bimetal lugs. Jurnal Mekanikal, 38 (1). pp. 7-17. ISSN 2289-3873

Hassan, Mas Ayu (2015) Effects of hydroxyapatite coating with oxide interlayer on bioactivity performances in CoCrMo alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hemdi, Abdul Rahman (2015) Fuzzy based sustainability indicator for product design and development process. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Henry, N. and Dahlan, A. A. and Nasib, A. M. and Aziz, A. A. and Sumerru, Sumerru (2015) Performance of a variable speed of the split unit air conditioning system using fuzzy logic controller. In: International MultiConference of Engineers and Computer Scientists 2015, IMECS 2015, 18 - 20 March 2015, Tsimshatsui, Kowloon.

Hor, Win Han (2015) Neuro-network modelling and control of flexibly mounted cylindrical riser. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hosseini, Seyed Ehsan and A. Wahid, Mazlan (2015) Utilization of biogas released from palm oil mill effluent for power generation using self-preheated reactor. Energy Conversion and Management, 105 . pp. 957-966. ISSN 0196-8904

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2015) Effects of burner configuration on the characteristics of biogas falmeless combustion. Combustion Science and Technology, 187 (8). pp. 1240-1262. ISSN 0010-2202

Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan and Ganjeh Kaviri, Abdol Saeid (2015) An overview of renewable hydrogen production from thermochemical process of oil palm solid waste in Malaysia. Energy Conversion and Management, 94 . pp. 415-429. ISSN 0196-8904

Hosseini, Seyed Ehsan and Bagheri, Ghobad and Khaleghi, Mostafa and Wahid, Mazlan Abdul (2015) Combustion of biogas released from palm oil mill effluent and the effects of hydrogen enrichment on the characteristics of the biogas flame. Journal Of Combustion, 2015 . ISSN 2088-8708

Hosseini, Seyed Ehsan and Mazlan, Abdul Wahid and Jamil, Muhammad Mahmud and Mohd. Azli, Anis Athirah and Misbah, Mohamad F. (2015) A review on biomass-based hydrogen production for renewable energy supply. International Journal of Energy Research, 39 (12). pp. 1597-1615. ISSN 0363-907X

Hourmand, Mehdi and Farahany, Saeed and Sarhan, Ahmed A. D. and Noordin, Mohd. Yusof (2015) Investigating the electrical discharge machining (EDM) parameter effects on Al-Mg2Si metal matrix composite (MMC) for high material removal rate (MRR) and less EWR-RSM approach. International Journal of Advanced Manufacturing Technology, 77 (5-8). pp. 831-838. ISSN 0268-3768

Hudin, Norlaile Salleh and Abdul Hamid, Abu Bakar and Thoo, Ai Chin (2015) Case studies of risk communication in automotive part manufacturers. Advanced Science Letters, 21 (5). pp. 1575-1578. ISSN 1936-6612

Husain, Arastu Sajjad (2015) LNG/Dual fuel powered fishing boats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussein, Ahmed Kadhim and Rout, Sachindra Kumar and Fathinia, Farshid and Chand, Ramesh and Mohammed, Hussein A. (2015) Natural convection in a triangular top wall enclosure with a solid strip. Journal of Engineering Science and Technology, 10 (10). pp. 1326-1341. ISSN 1823-4690

Hywel, R. and Tee, B. T. and Arifin, M. Y. and Tan, C. F. and Gan, C. K. and Chong, C. T. (2015) ACMV energy analysis for academic building: a case study. In: 7th International Conference on Cooling and Heating Technologies, ICCHT 2014, 4 - 6 November 2014, Subang Jaya, Selangor Darul Ehsan.

Ibrahim, Mohammad Izazi (2015) Evaluation of various milling strategies in supporting advanced CAD/CAM environment for biomedical applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mustafa K. and Idris, Jamaliah (2015) Influence of milling time on growth morphology and mechanical properties of aluminum-silicon-carbide composites. Jurnal Teknologi, 76 (1). pp. 201-205. ISSN 2180–3722

Ibrahim, Mustafa Khaleel and Idris, Jamaliah (2015) Microstructure and mechanical properties of aluminum-silicon carbide composite fabricated by powder metallurgy. In: 3rd International Science Postgraduate Conference, 24-26 Feb,2015, Johor Bahru, Johor.

Ibrahim, Thamer Rashid (2015) Experimental study of heat transfer in asphalt solar collector. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Idris, J. and Hon, T.W . (2015) High-performance carbon nanotubes thermal interface materials. In: 36th International Electronics Manufacturing Technology Conference, 11 - 13 November 2014, Johor, Malaysia.

Ishak, Mohamad Shaiful Ashrul (2015) Hasil pembakaran emisi rendah dengan menggunakan bahan api biodiesel berbantukan aliran berpusar. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohamad Shaiful Ashrul and Mohd. Jaafar, Mohammad Nazri and Wan Omar, Wan Zaidi (2015) Numerical analysis of effect of preheat and swirl of inlet air on temperature profile in canister burner. Jurnal Teknologi, 72 (4). pp. 27-34. ISSN 2180-3722

Ismail, Mohd. Arif (2015) Performance of improved savonius vertical axis marine current turbine rotor design. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ismail, Muhammad Izzal and Costall, Aaron W. and Martines-Botas, Ricardo and Rajoo, Srithar (2015) Turbocharger matching method for reducing residual concentration in a turbocharged gasoline engine. SAE Technical Papers, 2015 . ISSN 0148-7191

Ismail, Nasrudin and Koh, Kho King and Yaakob, Omar and Adnan, Faizul Amri and Ismail, Mohd. Arif and Wan Nik, Wan Mohd. Norsani and Hing, Lee Siang and Balaji, Rajoo and Ahmad, Badruzzaman (2015) A ballast water treatment system using engine waste heat: is it viable? Journal Of Transport System Engineering, 2 (3). pp. 31-36. ISSN 2289-9790

Ismail, Norasyikin and Ani, Farid Nasir (2015) A review on plasma treatment for the processing of solid waste. Jurnal Teknologi, 75 (2). pp. 41-49. ISSN 0127-9696

Ismail, Norasyikin and Ani, Farid Nasir (2015) Syngas production from microwave gasification of oil palm biochars. In: Applied Mechanics And Materials, 2015.

Israr Ahmad, Haris Ahmad and Md. Kassim, Muhamad Fareez and Wong, King Jye and Yahya, Mohd. Yazid (2015) Experimental investigation of pure bamboo plate under quasi-static indentation test. Journal Of Transport System Engineering, 2 (3). pp. 25-30. ISSN 2289-9790

Izzuddin, Nur and Sunarsih, Sunarsih and Priyanto, Agoes (2015) Mathematical Model of Marine Diesel Engine Simulator for a New Methodology of Self Propulsion Tests. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014, 24-30 May 2014, Penang, Malaysia.

Jaafar, Fatimah Amirah (2015) Resistance reduction through air layer formation beneath a vessel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jahanshaloo, Leila and Kermani, Emad Pouryazdanpanah and Che Sidik, Nor Azwadi (2015) Numerical Prediction of Nanofluid Flow in Channel with Heated Cavity. Journal Of Computational And Theoretical Nanoscience, 12 (9). pp. 2442-2447. ISSN 1546-1955

Jamehshooran, Bijan Ganji and Shaharoun, Awaluddin Mohamed and Haron, Habibah Norehan (2015) Assessing supply chain performance through applying the SCOR model. International Journal Of Supply Chain Magement, 4 (1). pp. 1-11. ISSN 2050-7526

Jamehshooran, Bijan Ganji and Shaharoun, Awaluddin Mohamed and Haron, Habibah Norehan (2015) The moderating effect of web service on the relationship between business analytics and supply chain performance. Journal Of Theoretical And Applied Information Technology, 76 (1). pp. 97-108. ISSN 1992-8645

Jaswar, K. and Siow, C. L. and Khairuddin, N. M. and Abyn, H. and Guedes Soares, C. (2015) Comparison of floating structures motion prediction between diffraction, diffraction-viscous and diffraction-Morison methods. In: 2nd International Conference on Maritime Technology and Engineering, MARTECH 2014, 15-17 Oct 2014, Lisbon, Portugal.

Javan, Saeed and Ahmadi, Pouria and Mansoubi, Hadi and Mohd. Jaafar, Mohammad Nazri (2015) Exergoeconomic based optimization of a gas fired steam power plant using genetic algorithm. Heat Transfer - Asian Research, 44 (6). pp. 533-551. ISSN 1099-2871

Jehad, Dhafir Giyath (2015) Numerical investigation of turbulent nanofluid flow effect on enhancing heat transfer in straight channels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Johar, M. and Asasaari, S. F. M. and Tamin, M. N. (2015) Strain rate-dependent deformation and failure process of adhesive joints. In: 2014 36th IEEE International Electronics Manufacturing Technology Conference, IEMT 2014, 11-13 Nov 2014, Johor, Malaysia.

Kadir, Z. A. and Mohammad, R. and Othman, N. (2015) Low back pain problem amongst port crane operator. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Kadir, Z. A. and Mohammad, R. and Othman, N. (2015) Six sigma approach in safety performance at transport logistics industry. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Kafuku, John Mbogo and Mat Saman, Muhamad Zameri and Mohd. Yusof, Shar'i and Sharif, Safian and Zakuan, Norhayati (2015) Investment decision issues from remanufacturing system perspective: Literature review and further research. 12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS, 26 . pp. 589-594. ISSN 2212-8271

Kamsah, Nazri and Mohamed Kamar, Haslinda and Ku Shuib, Ku Nor Atikah and Mufid, Nur Amalina (2015) Performance analysis of a solid desiccant air dehumidifier. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 10 (1). pp. 5-10. ISSN 2289-7879

Kamsah, Nazri and Mohamed Kamar, Haslinda and Sumeru, Kasni and Sutandi, Tandi (2015) Experimental study on a cold storage system with a variable speed compressor. In: The 8th International Meeting on Advances in Thermofluids (IMAT2015), 11-12 Nov, 2015, Indonesia.

Kareem, Zaid S. and Mohd. Jaafar, Mohammad Nazri and Lazim, Tholudin M. and Abdullah, Shahrir and Abdulwahid, Ammar Fakhir (2015) Passive heat transfer enhancement review in corrugation. Experimental Thermal And Fluid Science, 68 . pp. 22-38. ISSN 0892-7057

Kareem, Zaid Sattar and Abdullah, Shahrir and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Nazri and Abdul Wahid, Ammar F. (2015) Heat transfer enhancement in three-start spirally corrugated tube: experimental and numerical study. Chemical Engineering Science, 134 . pp. 746-757. ISSN 0009-2509

Kareem, Zaid Sattar and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and Abdul Wahid, Ammar F. (2015) Heat transfer enhancement in two-start spirally corrugated tube. Alexandria Engineering Journal, 54 (3). pp. 415-422. ISSN 1110-0168

Kareem, Zaid Sattar and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and AbdulWahid, Ammar Fakhir (2015) Heat transfer enhancement comparisons in different tube shapes. International Review on Modelling and Simulations, 8 (2). pp. 232-238. ISSN 1974-9821

Karimian, Majid and Ourdjini, Ali and Idris, Mohd. Hasbullah and Jafari, Hassan (2015) Effects of Casting Parameters on Shape Replication and Surface Roughness of LM6 Aluminium Alloy Cast Using Lost Foam Process. Transactions Of The Indian Institute Of Metals, 68 (2). pp. 211-217. ISSN 0972-0871

Kasava, Nithia Kuar and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2015) Low carbon emissions review in aviation engine technology for Asean airspace: a proposal. In: International Conference of Low Carbon Asia (ICLCA 2015), 11-12 Okt, 2015, Johor Bahru, Johor.

Kasava, Nithia Kumar and Mohd. Yusof, Noordin and Khademi, Alireza and Mat Saman, Muhammad Zameri (2015) Sustainable domain value stream mapping (SdVSM) framework application in aircraft maintenance: A case study. 12TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING - EMERGING POTENTIALS, 26 . pp. 418-423. ISSN 2212-8271

Kasava, Nithia Kumar and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2015) Qualitative theory building method for lean sustainable framework development: a methodology. In: 4Th International Conference on Advanced Manufacturing Technology, 20-22 Sept, 2015, Johor Bahru, Johor.

Kasypi, M. and Abd. Kader, Ab. Saman and Amir, W. M. and Shah, M. Z. and Zailani, A. and Raqib, A. G. and Harom, N. M. A. and S., R. Chan (2015) Window analysis: a container terminal. In: International Conference on Integrated and Sustainable Transportaion, 15-17 Dec, 2015, Melaka, Malaysia.

Kchaou, Mohamed and Sellami, Amira and Abu Bakar, Abd. Rahim and Mat Lazim, Ahmad Razimi and Elleuch, Riadh and Kumar, Senthil A. Karthick (2015) Brass fillers in friction composite materials: tribological and brake squeal characterization for suitable effect evaluation. Steel And Composite Structures, 19 (4). pp. 939-952. ISSN 1229-9367

Keng, Bin Loke and Abd. Kader, Ab. Saman and Ahmad, Mohd. Zamani and Abdul Hamid, Saharuddin and Othman, Mohamad Rosni (2015) Marginal expansion planning of infrastructure at a container terminal. Open Journal Of Marine Science (5). pp. 99-107. ISSN 2161-7384

Khakdaman, Masoud and Wong, Kuan Yew and Zohoori, Bahareh and Tiwari, Manoj Kumar and Merkert, Rico (2015) Tactical production planning in a hybrid Make-to-Stock-Make-to-Order environment under supply, process and demand uncertainties: a robust optimisation model. International Journal Of Production Research, 53 (5). pp. 1358-1386. ISSN 0020-7543

Khalajabadi, Shahrouz Zamani and Abdul Kadir, Mohammed Rafiq and Izman, S. and Samavati, Alireza R. and Othaman, Zulkafli (2015) Synthesis, microstructure and biodegradation behavior of nano-Si and nano-ZnO/Si coatings on a Mg/HA/TiO2/MgO nanocomposite. Ceramics International, 41 (9). pp. 11346-11358. ISSN 2728-8421

Khalajabadi, Shahrouz Zamani and Abdul Kadir, Mohammed Rafiq and Izman, Sudin and Mohd. Yusop, Mohd. Zamri (2015) Facile fabrication of hydrophobic surfaces on mechanically alloyed-Mg/HA/TiO2/MgO bionanocomposites. Applied Surface Science, 324 . pp. 380-392. ISSN 0169-4332

Khaleghi, Mostafa (2015) Experimental and computational thermal analysis of vortex flame in meso-scale combustor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Abdul Wahid, Mazlan (2015) Investigations of asymmetric non-premixed meso-scale vortex combustion. Applied Thermal Engineering, 81 . pp. 140-153. ISSN 1359-4311

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Wahid, Mazlan A. (2015) Experimental and numerical investigations of biogas vortex combustion. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 229 (6). pp. 662-676. ISSN 0957-6509

Khaleghi, Mostafa and Hosseini, Seyed Ehsan and Wahid, Mazlan A. (2015) Vortex combustion and heat transfer in meso-scale with thermal recuperation. International Communications in Heat and Mass Transfer, 66 . pp. 250-258. ISSN 0735-1933

Kheimehsari, H. and Izman, Sudin and Shirdar, Mostafa Rezazadeh (2015) Effects of HA-Coating on the Surface Morphology and Corrosion Behavior of a Co-Cr-Based Implant in Different Conditions. Journal Of Materials Engineering And Performance, 24 (6). pp. 2294-2302.

Khiyon, N. A. and Mohamed, Sarajul Fikri (2015) Life cycle costing of mechanical and electrical services for private finance initiatives projects in Malaysia. International Journal Of Tomography And Simulation, 28 (3). pp. 96-103. ISSN 2319-3336

Khor, Kang Xiang and Chin, Patrick Jun Hua and Abdul Rahman, Hisyam and Yeong, Che Fai and Narayanan, Aqilah Leela T. and Lee, Eileen Ming Su (2015) Development of reconfigurable rehabilitation robot for post-stroke forearm and wrist training. Jurnal Teknologi, 72 . pp. 79-83. ISSN 0127-9696

Kianpour, Ehsan and C. S., Nor Azwadi and Mohammad Hussein, Razavi and M., Akbari and Masoud, Afrand and Golshokouh, Iman (2015) Thermodynamic analyzes of film cooling for a restructured cooling holes at the end of gas turbine engine combustor. International Journal of Mechanics, 9 . pp. 11-15. ISSN 1996-3599

Kidam, Kamarizan and Sahak, Haslinda A. and Hassim, Mimi H. and Hashim, Haslenda and Hurme, Markku (2015) Method for identifying errors in chemical process development and design base on accidents knowledge. Process Safety And Environmental Protection, 97 . pp. 49-60. ISSN 0957-4174

King, Jye Wong and Israr, Haris Ahmad and Tamin, Mohd. Nasir (2015) Characterisation of moisture absorption effects on the strength of composite materials. In: Advanced Materials Research, 2015.

Koh, Kho King and Yaakob, O. B. and E., Azreen and K., Nurhaslinda (2015) The study of ducted propeller in propulsion performance of a Malaysia fishing boat. Jurnal Teknologi, 74 (5). pp. 39-43. ISSN 0127-9696

Koh, Khoking and H. M. Ibrahim, Mohamad Izhan and Kader, A. S. A. and Agoes, Priyanto and Rahimuddin, Rahimuddin and Arib, M. N. and Zan, U. I. and Lok, K. B. and Wira, Jazair Yahya and Mohd. Noor, Alias and Abdul Pauzi, Mohamad Pauzi and Abdul Malik, Adi Maimun (2015) Super yatch design study for Malaysian sea (Langkawi Island). Jurnal Teknologi, 74 (5). pp. 33-37. ISSN 0127-9696

Konneh, Mohamed and Izman, Sudin and Kassim, Abdullah Abdul Rahman (2015) Milling damage on Carbon Fibre Reinforced Polymer using TiAlN coated End mills. In: 11th International Conference on Damage Assessment of Structures, DAMAS 2015, 24-26 Aug 2015, Ghent, Belgium.

Kori, Mohamad Ikhwan (2015) Hemodynamic effect of Patent Ductus Asteriosus (PDA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kurniawan, Denni and Kim, Byungsun and Lee, Hoyong and Lim, Joongyeon (2015) Towards improving mechanical properties of basalt fiber/polylactic acid composites by fiber surface treatments. Composite Interfaces, 22 (7). pp. 553-562. ISSN 0927-6440

Lazim, Zulfaqih (2015) Ultimate strength analysis of ships plate due to corrosion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Cheng Sheng and Wong, Kuan Yew (2015) Knowledge management performance measurement in micro-, small-, and medium-sized enterprises: an exploratory study. Business Information Review, 32 (4). pp. 204-211. ISSN 0266-3821

Li, Pin Tan and Kuan, Yew Wong (2015) Linkage between knowledge management and manufacturing performance: a structural equation modeling approach. Jourl Of Knowledge Magement, 19 (4). pp. 814-835. ISSN 1367-3270

Liew, Kimfa and Mohd. Ghazali, Normah (2015) Simulation of flow and temperature development in a thermoacoustic resonator. International Journal of Technology, 6 (4). pp. 573-583. ISSN 2086-9614

Lim, Chih Hoo (2015) The effect of outer surface roughness for evaporator tube in the desalination plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Choong Heng and Al-Amin, Abul Quasem and Saidur, Rahman and Ward, Thomas Arthur (2015) Renewable energy choice: cost and energy analysis of grid connected photovoltaic system in Malaysia. Environmental Progress and Sustainable Energy, 34 (3). pp. 866-880. ISSN 1944-7442

Mahamad, Firdaus and Koto, Jaswar and Ishak, Iskandar Shah and Ammoo, Mohd. Shariff (2015) Performance characteristics of generic bell 206b helicopter tail rotor blade using empirical numerical method. In: The 2nd International Conference on Ocean, Mechanical and Aerospace., 21-22 Oct, 2015, Indonesia.

Mahamad, Firdaus and Koto, Jaswar and Ishak, Iskandar Shah and Ammoo, Mohd. Shariff (2015) Wind tunnel test on generic agusta-bell 206b helicopter tail rotor blades. Journal of Aeronautical -Science and Engineering, 1 . pp. 1-6. ISSN 2442-6407

Mahamad Hakimi, Ismail (2015) Machinability study of uncoated and coated carbide tools when drilling CFRP/metal stacks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahdi, Raed Abed and Mohammed, Hussein A. and Munisamy, Kannan M. and Saeid, Nawaf H. (2015) Experimental and numerical investigation of combined convection heat transfer and fluid flow around circular cylinder through rectangular and trapezoidal open-cell aluminum foams. Chemical Engineering Communications, 202 (5). pp. 674-693. ISSN 0098-6445

Mahdi, Raed Abed and Mohammed, Hussein A. and Munisamy, Kannan M. and Saeid, Nawaf H. (2015) Review of convection heat transfer and fluid flow in porous media with nanofluid. Renewable and Sustainable Energy Reviews, 41 . pp. 715-734. ISSN 1364-0321

Mahmood, Salwa and Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin (2015) Graphical user interface for assessing sustainability by using fuzzy logic: a case study on hollow fiber membrane module. Jurnal Teknologi, 76 (1). pp. 207-220. ISSN 2180-3722

Mahmood, Salwa and Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin (2015) Proposed Framework for Assessing the Sustainability of Membrane Life Cycle. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22-24 Sep 2014, Johor Bahru, Johor, Malaysia.

Mahmud, J. O. and Khor, S. A. and Mohd. Ismail, M. S. and Mohd. Taib, Jamaludin and Ramlan, N. R. and Ling, K. W. (2015) Design for paraplegia: Preparing product design specifications for a wheelchair. Technology And Disability, 27 (3). pp. 79-89. ISSN 1055-4181

Mak, Kam Wong (2015) Study of micro pits on billet experimental surface in extrusion process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Makhtar, Nooraini (2015) Hybrid intelligent system for demand forecasting in die-casting industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mamat, A. M. I. B. and Martinez-Botas, R. F. and Chiong, M. C. and Rajoo, S. and Petrovic, S. and Romagnoli, A. (2015) Exhaust Gas Energy Recovery Via Electric Turbocompounding. In: 7th International Conference on Applied Energy, ICAE 2015, 28-31 March 2015, Abu Dhabi.

Mamat, Aman M. I. and Martines-Botas, Ricardo and Rajoo, S. and Romagnoli, Alessandro and Petrovic, Simon (2015) Waste heat recovery using a novel high performance low pressure turbine for electric turbocompounding in downsized gasoline engines: experimental and computational analysis. Energy, 90 . pp. 218-234. ISSN 0360-5442

Mansor, Shuhaimi and Boo, Koon Yan and Abdul Latif, Ainullotfi (2015) Aerodynamic damping and stiffness determination for aircraft wing flutter speed analysis. In: 33rd AIAA Applied Aerodynamics Conference, 22-26 June, 2015, USA.

Mas’ood, Najlaa Nazihah (2015) Model development of estimating oil discharge for sustainable green port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat, Shabudin and Huri, M. Z. A. D. (2015) Experimental investigation of delta wing flow behaviour under pitching motion. Journal Of Transport System Engineering, 2 (3). pp. 19-24. ISSN 2289-9790

Mat Dzahir, M. Azwarie and Hussein, Mohamed and Supriyo, Bambang and Tawi, Kamarul Baharin and Yaakob, Mohd. Shafiek and Mat Dzahir, M. Azuwan and Mohamad, Maziah (2015) Optimal tuning of a PID controller for EMDAP-CVT using particle swarm optimization. Jurnal Teknologi, 75 (11). pp. 135-141. ISSN 2180-3722

Mat Ghani, M. F. and Mohd. Taib, Jamal and Dzakaria, Afandi (2015) Feasibility study on the implementation of Cubic Motion curve for vehicle trajectory planning. Advances in Mechanical Engineering, 7 (1). ISSN 1687-8132

Mat Kiah, Missjuliana (2015) Six sigma for scrap cost reduction in remanufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Lazim, Tholudin and Mansor, Shuhaimi and Ishak, Iskandar Shah (2015) Computational fluid dynamic studies on helicopter main-rotor-hub assembly unsteady wake. Journal Of Aeronautical-Science And Engineering-, 2 . pp. 1-8. ISSN 2442-6407

Mat Saman, Muhamad Zameri and Daud, Mohd. Fadzil and Udin, Amirmudin and Dagala, Victor Medugu (2015) Concept mapping as a strategy for higher performance in automobile engineering exams. International Journal Of Scientific & Engineering Research, 6 (7). pp. 1304-1306. ISSN 2229-5518

Mat Saman, Muhamad Zameri and Mohd. Yusof, Noordin and Mahmood, Salwa (2015) Sustainability of product life cycle: a case study of hollow fiber membrane. In: International Conference of Low Carbon Asia (ICICA 2015), 11-13 Oct, 2015, Johor Bahru, Johor.

Mat Saman, Muhamad Zameri and Mohmad Zakwan @ Zakuan, Norhayati and Sharif, Safiah and Gholami, Hamed (2015) Strategic leadership towards strategic leadership towards sustainable development in higher education using the developed interpretive structural modelling. In: Global Cleaner Production and Sustainable Consumption Conference, 1-4 Nov, 2015, Spain.

Mataram, Agung and Ismail, Ahmad Fauzi and Yuliwati, Erna and Matsuura, T. and Zamheri, A. and Rizal, S. (2015) Water treatment perfomance: application of electrospun nanofibers. Jurnal Teknologi, 77 (1). pp. 263-267. ISSN 0127-9696

Mazali, Izhari Izmi and Tawi, Izhari IzmiKamarul Baharin and Supriyo, Bambang and Che Kob, Mohd. Sabri and Abu Husain, Nurulakmar and Che Kob, Mohd. Salman (2015) Application of disc spring in clamping force mechanism for electro-mechanical continuously variable transmission. Jurnal Teknologi, 77 (22). pp. 129-135. ISSN 0127-9696

Md. Nordin, Nik Abdul Hadi and Racha, Surya Murali and Matsuura, Takeshi and Misdan, Nurasyikin and Abdullah Sani, Nur Aimie and Ismail, Ahmad Fauzi and Mustafa, Azeman (2015) Facile modification of ZIF-8 mixed matrix membrane for CO2/CH4 separation: synthesis and preparation. RSC Advances, 5 (4). pp. 43110-43120. ISSN 2046-2069

Md. Razak, D. and Syahrullail, Samion and Sapawe, Norzahir and Yahya, Azli and Nuraliza, N. (2015) A new approach using palm olein, palm kernel oil, and palm fatty acid distillate as alternative biolubricants: improving tribology in metal-on-metal contact. Tribology Transactions, 58 (3). pp. 511-517. ISSN 1040-2004

Md. Salleh, Mohammad Annuar (2015) Maintenance management assessment in a local manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Memari, Ashkan and Rahim, Abdul Rahman Abdul and Ahmad, Robiah (2015) An integrated production-distribution planning in green supply chain: a multi-objective evolutionary approach. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22-24 Sep 2014, Johor Bahru, Johor, Malaysia.

Merapan, Kirubaharan (2015) Glycerine pitch from glycerine concentration process as alternative fuel for boiler operations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mesbah, Rashid (2015) Software dynamic pricing by an optimization deterministic model with presence of piracy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moayedi, H. and Nazir, R. and Mosallanezhad, M. (2015) Determination of reliable stress and strain distributions along bored piles. Soil Mechanics And Foundation Engineering, 51 (6). pp. 285-291. ISSN 0379-0738

Mohamad Ali, Nurhasyimah (2015) Improving water meter reading operations using optimization techniques for Syarikat Air Johor. Masters thesis, Universiti Teknologi Malaysia.

Mohamad Nor, Alif Syarafi and Md. Yunus, Mohd. Amri and Nawawi, Sophan Wahyudi and Ibrahim, Sallehuddin and Rahmat, Mohd. Fuaad (2015) Development of planar electromagnetic sensor array for nitrate and sulphate detection in natural water sources. Sensor Review, 35 (1). pp. 106-115. ISSN 2602-0288

Mohamad Shafie, Nur Adila and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain and Rajoo, Srithar (2015) Discharge and flow coefficient analysis in internal combustion engine using computational fluid dynamics simulation. In: International Conference on Computational Fluid Dynamics in Research & Industry 2015, 17-19 Aug, 2015, Kuala Lumpur, Malaysia.

Mohamed, Mohd. Firdaus (2015) System identification and intelligent control of automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Norirda and Mat Saman, Muhamad Zameri and Sharif, Safian (2015) Quality assurance of remanufactured components of end-of-life vehicle: a literature review. In: 2015 Advancement on Mechanical and Manufacturing Technology, 24-26 Nov, 2015, Indonesia.

Mohamed Bazin, Maisarah and Abubakar, Mu'Azu and Ahmad, Norhayati (2015) A comparative study of porous support from Sayong and Kankara clay. In: 3rd International Conference on Water Resources (ICWR 2015), 24-25 Nov, 2015, Langkawi, Malaysia.

Mohamed Kamar, Haslinda and Kamsah, Nazri and Sumeru, Kasni and Muhammad Idrus, Alhamid (2015) Effect of regeneration air temperature on the performances of a desiccant wheel. In: The 8th International Meeting on Advances in Thermofluids (IMAT) 2015, 11-12 Nov, 2015, Indonesia.

Mohamed Soid, Shahril Nizam and Amir, Syed Ahmad and Ismail, M. A. and Hamid, Muhammad Najib and Mohd. Amzari, Megat and Muhamad Said, Mohd. Farid (2015) Simulation studies on the performance of small engine fuelled by methane and the effect of various valve timings. In: The 4th International Conference on Computer Science & Computational Mathematics (ICCSM 2015)", 7-8 May, 2015, Langkawi, Malaysia.

Mohammad, Roslina and Othman, Norazli and Sharifi, Davoud and Sharifi, Foad and A. Kadir, Zuritah (2015) Targeting method of heat exchanger network in olefin unit of oil refinery. In: Proceedings of the 4th World Virtual Conference on Applied Sciences & Engineering Applications, 28-30 Nov 2015, Kuala Lumpur, Malaysia.

Mohammad Diab, Nateg (2015) Microstructure and mechanical properties of Al-Alloy with rare earth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammad Yazid, Amirul Akmal (2015) Electrical discharge machining of hybrid material using copper electrode. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed, H. A. and Alawi, O. A. and Wahid, M. A. (2015) Mixed convective nanofluid flow in a channel having backward-facing step with a baffle. Powder Technology, 275 . pp. 329-343. ISSN 0031-8655

Mohammed Kadhim, Fatimah (2015) Creep characteristics of austenitic stainless steel foils under oxidative and non-oxidative environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohammed Khdher, AbdolBaqi and Che Sidik, Nor Azwadi and Mamat, Rizalman and Wan Hamzah, Wan Azmi (2015) Experimental and numerical study of thermo-hydraulic performance of circumferentially ribbed tube with Al2O3 nanofluid. International Communications in Heat and Mass Transfer, 69 . pp. 34-40. ISSN 0735-1933

Mohd Ghazali, N. and Pamitran, A. S. and Novianto, S. and Khabibah, U. and Alhamid, M. I. (2015) Prediction of the optimized frictional pressure drop in a two-phase flow small-channel with genetic algorithm. In: 7th International Conference on Applied Energy, ICAE 2015, 28-31 March 2015, Abu Dhabi, UAE.

Mohd. Ahyan, Nurul Aini and Samion, Syahrullail (2015) Lubricant viscosity: evaluation between existing and alternative lubricant in metal forming process. In: The 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Mohd. Ahyan, Nurul Aini and Samion, Syahrullail and Daud, Md. Razak (2015) Non-edible palm oil : alternative to mineral based lubricant in metal forming process. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Pulau Pinang, Malaysia.

Mohd. Alias, Adib Zulhilmi (2015) Pressure drop prediction for stratified oil-water flow in horizontal pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Ayob, Amirul Adzhar and Yaakob, Omar (2015) Roll mitigation of small fishing boat. Journal Of Transport System Engineering, 2 (2). pp. 46-60. ISSN 2289-9790

Mohd. Azli, Anis Athirah (2015) Computational study of turbulent unconfined swirl flames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Bahari, Zaili (2015) Dynamics characteristics and energy absorption of fibre-metal-laminate (FML) thin-walled tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Bakhori, Siti Nadia and Hassan, Mohamad Zaki and Md. Daud, Mohd. Yusof and Sarip, Shamsul and A. Rahman, Noor Khazanah and Ismail, Z. and Abdul Aziz, Sa'ardin (2015) Mechanical behavior of kenaf/epoxy corrugated sandwich structures. In: 3rd International Conference on Mechanical Engineering Research (ICMER), 18-19 Aug, 2015, Pahang, Malaysia.

Mohd. Faizal, H. and A. Latiff, Z. and Mohd. Iskandar, M. A. and Mohamad Nazri, M. S. (2015) Physical characteristics of briquettes contain mixture of pulverized empty fruit bunch and polyethylene plastics. Journal of Advanced Research in Materials Science, 11 (1). pp. 1-7. ISSN 2289-7992

Mohd. Faizal, Hasan and Abdul Latiff, Zulkanain and Mohd. Iskandar, Muhammad Amin (2015) Characteristics of binderless palm biomass briquettes with various particle sizes. Jurnal Teknologi, 77 (8). pp. 1-5. ISSN 0127-9696

Mohd. Faudzi, Ahmad Àthif and Ong, Tian Qiong and Xuan, Wong Liang and Kit, Tham Weng (2015) Development of ROV based water tank cleaning robot. Jurnal Teknologi, 72 . pp. 103-110. ISSN 0127-9696

Mohd. Ghazali, Normah (2015) Environmentally friendly thermoacoustics refrigeration: theory and applications. In: 14th International Conference on QiR (Quality in Research) 2015, 10-13 August, 2015, Indonesia.

Mohd. Ghazali, Normah and Liew, Kim Fa and Zolpakar, Nor Atiqah (2015) End effects of a thermoacoustic stack plate on the flow pattern. In: 14th International Conference on QiR (Quality in Research) 2015, 10-13 August, 2015, Indonesia.

Mohd. Ghazali, Normah and Oh, Jong Taek and Nguyen, Ba Chien and Choi, Kwang-Il and Ahmad, Robiah (2015) Comparison of the optimized thermal performance of square and circular ammonia-cooled microchannel heat sink with genetic algorithm. Energy Conversion And Management, 102 . pp. 59-65. ISSN 1968-9041

Mohd. Ghazali, Normah and Razali, Shazwan Fitri and Jamaludin, Hishamuddin (2015) Investigation of the minimized pressure drop of four refrigerants in a small channel with genetic algorithm. In: 14th International Conference on QiR (Quality in Research) 2015, 10-13 August, 2015, Indonesia.

Mohd. Ghazali, Normah and Yousif, Qais Abid and Pamitran, Agus Sunjarianto and Novianto, Sentot and Ahmad, Robiah (2015) Optimization of the friction factor and frictional pressure drop of R22 and R290. In: 8th International Meeting on Advances in Thermofluids, 11-12 Nov, 2015, Indonesia.

Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin and Abdullah, Shahrir and Kareem, Zaid Sattar and Abdulwahid, Ammar Fakhir (2015) Corrugation profile effect on heat transfer enhancement of laminar flow region. In: International Conference on Mechanical and Industrial Engineering (ICMAIE 2015), 8-9 Feb, 2015, Kuala Lumpur, Malaysia.

Mohd. Khairi, Mohd. Taufiq and Ibrahim, Sallehuddin and Mohd. Yunus, Mohd. Amri and Faramarzi, Mahdi and Nur Ayub, Nor Muzakkir (2015) Application of optical tomography for monitoring gas bubbles flow based on independent component analysis algorithm. Jurnal Teknologi, 73 (3). pp. 145-152. ISSN 0127-9696

Mohd. Noor, Alias and Che Puteh, Rosnizam and Martinez Botas, Ricardo and Rajoo, Srithar and Romagnoli, Alessandro and Al-Naib, Uday M.Basheer and Shaikh Salleh, Sheikh Hussain and Md. Sah, Muhammad Hanafi (2015) Technologies for waste heat energy recovery from internal combustion engine: a review. In: International Conference On "New Trends in Multidisciplinary Research & Practice, 4-5 Nov, 2015, Turkey.

Mohd. Perang, Mohd. Rozi and Nasution, Henry and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Misseri, Mohd. Nazri and Mohd. Jamil, Hishamuddin and Andwari, Amin Mahmoudzadeh (2015) Evaluation of garden tools set and its performance characteristics. Jurnal Teknos-2K, 15 (1). pp. 12-19. ISSN 1411-4151

Mohd. Rohani, Jafri (2015) Relationship between statistical process control critical success factors and organizational performance. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Rohani, Jafri and Abdul Kadir, Aini Zuhra and Abdul Rani, Mat Rebi and Md. Zein, Raemy and Abdul Aziz, Roseni and Adeyemi, Ademola James (2015) Musculoskeletal disorders in body regions and its associated risk factors among electronics workers in Malaysia. In: Proceedings 19th Triennial Congress of the IEA, 9-14 Aug, 2015, Australia.

Mohd. Rohani, Jafri and Abdul Kadir, Aini Zuhra and Abdul Rani, Mat Rebi and Md. Zein, Raemy and Abdul Aziz, Roseni and James, Adeyemi Ademola (2015) Musculoskeletal disorders in body regions and its associated risk factors among electronic workers in Malaysia. In: Proceedings 19th Triennial Congress of the IEA, 9-14 Aug, 2015, Australia.

Mohd. Rohani, Jafri and Atan, Hood and Johari, Mohamed Fitri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun (2015) Occupational accident cost estimation: a case study in wood based related industries. Journal Of Occupational Safety And Health, 12 (1). pp. 109-116. ISSN 1675-5456

Mohd. Rohani, Jafri and Ithnin, Hafizah and Wan Bedurdin, Wan Lokman and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood (2015) Web-based interactive accident cost calculator for manufacturing industry. Journal Of Occupational Safety And Health, 12 (1). pp. 155-160. ISSN 1675-5456

Mohd. Rohani, Jafri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood (2015) Demographic analysis of occupational accident occurrence in manufacturing industry. Jurnal Teknologi, 77 (1). pp. 15-21. ISSN 0127-9696

Mohd. Rohani, Jafri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood (2015) Development of direct to indirect cost ratio of occupational accident for manufacturing industry. Jurnal Teknologi, 77 (1). pp. 127-132. ISSN 0127-9696

Mohd. Rohani, Jafri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood and James, Adeyemi Ademola and Udin, Amirmudin (2015) Occupational accident direct cost model validation using confirmatory factor analysis. In: The 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), 4-6 Feb, 2015, Indonesia.

Mohd. Rohani, Jafri and Johari, Mohamed Fitri and Wan Hamid, Wan Harun and Atan, Hood and James, Adeyemi Ademola and Udin, Amirmudin (2015) Occupational accident indirect cost model validation using confirmatory factor analysis. In: The 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2015), 4-6 Feb, 2015, Indonesia.

Mohd. Salleh, Mohd. Naqiuddin (2015) Study on the performance of envo diesel in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Szali Januddi, Mohd. Al-Fatihhi (2015) Monotonic and cyclic behaviour of trabecular bone under uniaxial and multiaxial loading. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yamin, Ahmad Hafizal (2015) Semiactive suspension system using sky hook controller with particle swarm optimization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yazid, A. and Jamaludin, Khairur Rijal and Awaluddin, M. S. and Sari, Emelia (2015) Pattern recognition on remanufacturing automotive component as support decision making using Mahalanobis-Taguchi system. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22-24 Sep 2014, Johor Bahru, Johor, Malaysia.

Mohd. Zali, Izzat Azim and Ishak, Iskandar Shah (2015) Effects of boundary layer scrapper on aerodynamic characteristics for automotive wind tunnel testing. Journal of Transport System Engineering, 2 (2). pp. 14-20. ISSN 2289-9790

Mohd. Zamberi, Mahanum and Hassan, S. N. H. and Ani, Farid Nasir (2015) Optimization of biodiesel production from transesterification of waste cooking oils using alkaline catalysts. In: Applied Mechanics And Materials, 2015.

Mohd. Zulkifli, S. and Mat Yajid, Muhamad Azizi and Idris, Mohd. Hasbullah and Daroonparvar, M. and Hamdan, Halimaton (2015) TGO formation with nicocralyta bond coat deposition using aps and HVOF method. In: Advanced Materials Research, 2015.

Mohd.Sam, Abdul Rahman and Gholami, Mehran and Mohamad Yatim, Jamaludin and Abu Hassan, Shukur (2015) Performance of carbon fibre reinforced polymer plate bonding system under various environmental conditions. In: 9th Asia Pacific Structural Engineering and Construction Conference and 8th Asean Civil Engineering Conference, 3-5 Nov, 2015, Kuala Lumpur, Malaysia.

Mohsenizadeh, S. and Alipour, R. and Shokri Rad, M. and Farokhi Nejad, A. (2015) Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading. Materials And Design, 88 . pp. 258-268. ISSN 2608-7741

Mohsenizadeh, Saeid (2015) Impact characteristic and energy absorption of auxetic foam-filled square tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohsenizadeh, Saeid and Alipour, Roozbeh and Nejad, Ali Farokhi and Shokri Rad, Mozafar and Ahmad, Zaini (2015) Experimental investigation on energy absorption of auxetic foamfilled thin-walled square tubes under quasi-static loading. In: 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Mohsin, M. L. and Tobi, A. L. M. and Siswanto, W. A. and Tamin, M. N. (2015) Finite element analysis of stress intensity factor of pre-cracked coated substrate under contact sliding. In: 2014 36th IEEE International Electronics Manufacturing Technology Conference, IEMT 2014, 11-13 Nov 2014, Johor, Malaysia.

Mortaza, Ahmad (2015) CFD modeling of flow induced vibration mechanism in sea water piping on a regasification terminal platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Moslemi, Navid and Redzuan, Norizah and Ahmad, Norhayati and Hor, Tang Nan (2015) Effect of current on characteristic for 316 stainless steel welded joint including microstructure and mechanical properties. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22-24 Sep 2014, Johor Bahru, Johor, Malaysia.

Muhamad, M. S. and Salim, Mohd. Razman and Lau, Woei Jye and Muhammad Yuzir, Muhamad Ali and Muhd. Yunus, Salmiati (2015) Fabrication polyethersulfone mixed matrix membrane incorporated with silica nanoparticles for BPA removal. Jurnal Teknologi, 74 (11). pp. 24-31. ISSN 2180–3722

Muhamad Said, Mohd. Farid and Mohd. Sadali, Mohamad Syazwan (2015) Engine performance analysis of cylinder deactivation system. Jurnal Teknos-2K, 15 (1). pp. 29-37. ISSN 1411-4151

Muhamad Said, Mohd. Farid and Mohd. Shahrin, Mohd. Zahin and Mohamad Shafie, Nur Adila (2015) Flow analysis of intake port in internal combustion engine. Jurnal Teknos-2K, 15 (2). pp. 42-54. ISSN 1411-4151

Muhamad Said, Mohd. Farid and N. W. M., N. W. M. and Zulikfli, Zulikfli and Edilan, M. M. and Kalam, M. A. and Ghazali, N. N. N. (2015) Effect of valve timing events on the performance of compressed natural gas direct injection (CNGDI) engine using simulation. In: International Conference on Mechanical Engineering and Advanced Material 2015, 3-4 Dec, 2015, Sabah, Malaysia.

Muhamad Said, Mohd. Farid and Rajoo, Srithar and Zahari, Izzarief (2015) Flow characterization of complete air induction system in internal combustion engine. In: The 13th Asian International Conference on Fluid Machinery 2015, 7-10 Sept, 2015, Japan.

Muhammad Hussein, Muhammad Zaly Shah and Moeinaddini, Mehdi and Hamzah, Amran (2015) Regression analysis of travel indicators and public transport usage in urban areas. World Academy Of Science, Engineering And Technology, 9 . pp. 1192-1196. ISSN 1307-6892

Muniandy, V. and Samin, P. M. and Jamaluddin, H. (2015) Application of a self-tuning fuzzy PI-PD controller in an active anti-roll bar system for a passenger car. Vehicle System Dymics, 53 (11). pp. 1641-1666. ISSN 0040-5779

Mustapa, Mohd. Shamsulizan (2015) Design and development of a flow forming machine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mustapha, Siti Noor Hidayah and Rahmat, Abdul Razak and Arsad, Agus and Alsagayar, Zyad Salem and Yeong, Shoot Kian (2015) Flexural properties of mmt reinforced unsaturated polyester/epoxidized palm oil biobased resin. In: Advanced Materials Research, Materials Research Society of Indonesia (MRS-ID) Meeting 2014, September 26-28, 2014, Bali, Indonesia, 26-28 Sept, 2015, Indonesia.

Musthafa, Anas Basri (2015) Study on the performance of palm methyl ester in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nakis, M. and Abdul Malik, Adi Maimun and Ahmeda, Yasser M. and Behrouzi, F. and Steen, S. and Tarmizi, A. (2015) Hydrodynamic resistance analysis of new hull design for multipurpose amphibious vehicle applying with finite volume method. Jurnal Teknologi, 74 (5). pp. 73-76. ISSN 2180-3722

Nakisa, M. and Maimun, A. and Ahmed, Y. M. and Behrouzi, F. and Jaswara, Jaswara and Tarmizi, A. (2015) Air lubrication influence on frictional resistance reduction of multi-purpose amphibious vehicle. Jurnal Teknologi, 74 (5). pp. 1-3. ISSN 2180–3722

Nakisa, M. and Maimun, A. and Ahmed, Yasser M. and Behrouzi, F. and Jaswar, Jaswar and Priyanto, A. (2015) Computational fluid dynamics (CFD) mesh independency technique for a propeller characteristics in open water condition. Jurnal Teknologi, 74 (5). pp. 5-10. ISSN 0127-9696

Nakphu, N. and Dewi, D. E. O. and Rizqie, M. Q. and Supriyanto, E. and Mohd Faudzi, A.A. and Kho, D. C. C. and Kadiman, S. and Rittipravat, P. (2015) Apical four-chamber echocardiography segmentation using marker-controlled watershed segmentation. In: 3rd IEEE Conference on Biomedical Engineering and Sciences, IECBES 2014, 8-10 Dec 2014, Kuala Lumpur, Malaysia.

Nasrollahpourniazi, Fatemeh (2015) An optimization model for blocks allocation to service vessels in a port container terminal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nasruddin, Fakhrizal Azmy (2015) Parametric study on a conceptual badminton racket using finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nasution, Henry and Abdul Azis, Azhar and Zulkifli, Amirah Haziqah and Dahlan, Afiq Aiman (2015) In-cabin temperature control and multi-circuit bus air-conditioning systems. In: Seoul International Conference on Applied Science and Engineering, 27-29 June, 2015, South Korea.

Nasution, Henry and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain (2015) PI control application for building air conditioning system. Jurnal Teknologi, 75 (11). pp. 61-69. ISSN 0127-9696

Nasution, Henry and Abdul Aziz, Azhar and Abdul Latiff, Zulkarnain and Engkuah, Stannely (2015) Comparison of air to air and air to water intercoolers in the cooling process of a turbocharger engine. Jurnal Teknologi, 74 (10). pp. 45-51. ISSN 0127-9696

Nasution, Henry and Abdul Aziz, Azhar and Dahlan, Afiq Aiman and Zulkifli, Amirah Haziqah and Sumeru, Sumeru (2015) Indoor temperature control and energy saving potential of an air conditioning system using PD controller. Jurnal Teknologi, 76 (11). pp. 63-67. ISSN 2180-3722

Nasution, Henry and Abdul Aziz, Azhar and Yusof, Zarina (2015) The water-cooled engine system performance. Jurnal Teknos-2K, 15 (1). pp. 1-11. ISSN 1411-4151

Nasution, Henry and Abdul Aziz, Azhar and Zulkifli, Amirah Haziqah and Dahlan, Afiq Aiman (2015) In-cabin vehicle initial temperature control: a review. Journal Of Advanced Review On Scientific Research, 13 (1). pp. 1-8. ISSN 2289-7887

Nasution, Henry and Che Hassan, Mohd. Hazim (2015) Development of properties database of carbon dioxide refrigerant. Jurnal Teknos-2K, 15 (2). pp. 21-32. ISSN 1411-4151

Nasution, Henry and Kow, Fang Leong (2015) Portable uv plasma air purifier in automobile. Journal Of Transport System Engineering, 2 (2). pp. 42-45. ISSN 2289-9790

Navaei, Ali S. and Mohammed, Hussein A. and Munisamy, Kannan M. and Yarmand, Hooman and Gharehkhani, Samira (2015) Heat transfer enhancement of turbulent nanofluid flow over various types of internally corrugated channels. Powder Technology, 286 . pp. 332-341. ISSN 0032-5910

Nekooei, Mohammad Javad and Jaswar, Koto and Priyanto, Agoes (2015) A simple fuzzy logic diagnosis system for control of internal combustion engines. Jurnal Teknologi, 74 (5). pp. 121-124. ISSN 0127-9696

Ng, Boon Chiang (2015) Soft computing based controllers for automotive air conditioning system with variable speed compressor. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Geak Kun (2015) Modelling and active vibration control of flexible manipulator structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Jo Han and Khor, Jing Huey and Wong, Kang Yao and Rajoo, Srithar and Chong, Cheng Tung (2015) Statistical analysis of engine system-level factors for palm biodiesel fuelled diesel engine responses. In: 7th International Conference on Applied Energy, ICAE 2015, 28-31 March 2015, Abu Dhabi, United Arab Emirates.

Ng, Jo-Han and Wong, Yao Hing and Fong, William Woei Chong and Chong, Cheng Tung and Chjiatlsabelle, Wong Minh (2015) Chemistry smart phone app with gamification elements for personalised learning. In: 6th International Conference on Science and Mathematics Education, 16-19 Nov, 2015, Penang, Malaysia.

Ngadiman, Nor Hasrul Akhmal and Idris, A. and Irfan, Muhammad and Kurniawan, Denni and Mohd. Yusof, Noordin and Nasiri, Rozita (2015) γ-Fe2O3 nanoparticles filled polyvinyl alcohol as potential biomaterial for tissue engineering scaffold. Journal of the Mechanical Behavior of Biomedical Materials, 49 . pp. 90-104. ISSN 1751-6161

Ngali, Mohd. Zamani and Osman, Kahar and Zakaria, Nazri Huzaimi (2015) Non-dimensional distribution pattern analysis of particle transportation in simplified pipeline system. Jurnal Teknologi, 77 (12). pp. 99-104. ISSN 2180-3722

Ngali, Zamani and Huzaimi, Nazri and Eng, Pei Ying and Osman, Kahar (2015) Four-dimensional simulation of particle transportation in simplified passageways system. ARPN Journal of Engineering and Applied Sciences, 10 (16). pp. 7103-7106. ISSN 1819-6608

Ngien, Su Kong and Ken, Tan Lit (2015) Numerical model for NAPL migration in double-porosity subsurface systems. In: 36th IAHR World Congress, The Hague, Netherlands, 2015, 28 June-3 July, 2015, Netherlands.

Ngui, Wai Keng and Leong, Mohd. Salman @ Yew Mun and Lim, Meng Hee and Abdelrhman, Ahmed Mohammed (2015) Detection of twisted blade in multi stage rotor system. In: Applied Mechanics and Materials, 1-4 Dec 2015, Batu Pahat, Johor.

Nguyenba, Chien and Vu, Phamquang and Mohd. Ghazali, Normah and Jong-Taek, Oh (2015) Convective heat transfer characteristics of single phase liquid in multiport minichannel tube: Experiment and CFD simulation. In: 7th International Conference on Applied Energy, ICAE 2015, 28-31 March 2015, Abu Dhabi, United Arab Emirates.

Nikakhtar, A. and Hosseini, A. A. and Wong, K. Y. and Zavichi, A. (2015) Application of lean construction principles to reduce construction process waste using computer simulation: a case study. International Journal of Services And Operations Management, 20 (4). pp. 461-480. ISSN 1744-2370

Noorawzi, Nuraliza and Samion, Syahrullail (2015) Experimental study of spherical pins under varying load condition using pin-on-disk tribotester. In: The 8th International Meeting on Advances in Thermofluids, 11-12 Nov, 2015, Indonesia.

Noorawzi, Nuraliza and Samion, Syahrullail and M.N., Musa (2015) Evaluation on the tribological properties of double fractionated palm olein at different load using pin-on-disk machine. In: World Virtual Conference on Applied Sciences and Engineering Applications, 2015.

Noordin, M. Y. and Jiawkok, N. and Ndaruhadi, P. Y. M. W. and Kurniawan, D. (2015) Machining of bone: Analysis of cutting force and surface roughness by turning process. Proceedings Of The Institution Of Mechanical Engineers, Part H: Jourl Of Engineering In Medicine, 229 (11). pp. 761-768. ISSN 0954-4070

Nor Azwadi, C. S. and Mamat, Rizalman (2015) Recent progress on Lattice Boltzmann simulation of nanofluids: a review. International Communications in Heat and Mass Transfer, 66 . pp. 11-22. ISSN 0735-1933

Nor Hassan, Abdul Hafiz (2015) Development and analysis of pulse detonation engine (PDE) with fuel-air premixed intake system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nordin, N. A. and Farahany, S. and Abu Bakar, T. A. and Hamzah, E. (2015) Microstructure development, phase reaction characteristics and mechanical properties of a commercial Al-20%Mg<inf>2</inf>Si-xCe in situ composite solidified at a slow cooling rate. Journal Of Alloys And Compounds, 650 . pp. 821-834. ISSN 0925-8388

Norwazan, A. R. and Mohd. Jaafar, M. N. (2015) Studies of isothermal swirling flows with different RANS models in unconfined burner. In: 2014 World Congress on Sustainable Technologies, WCST 2014, 8-10 Dec 2014, London.

Norwazan, A. R. and Mohd. Jaafar, Mohammad Nazri (2015) The Reynold’s number effect in high swirling flow in unconfined burner. Jurnal Teknologi, 72 (4). pp. 83-89. ISSN 0127-9696

Nuraliza, N. and Syahrullail, Samion and Musa, Md. Nor (2015) Evaluation on the tribological properties of double fractionated palm olein at different loads using pin-on-disc machine. Jurnal Teknologi, 75 (11). pp. 113-122. ISSN 2180-3722

Nuriyadi, Muhammad and Sumeru, Sumeru and Nasution, Henry (2015) The effect of liquid suction heat exchanger sub-cooler on performance of a freezer using R404A as working fluid. Jurnal Teknologi, 76 (11). pp. 57-61. ISSN 0127-9696

Nurul, M. A. and Syahrullail, S. and Musa, M. N. (2015) Determining alternatives for metal forming lubricants: A study using plane strain cold extrusion process of JIS-A1100 pure aluminum billet. Jurnal Teknologi, 74 (10). pp. 35-43. ISSN 0127-9696

Ojaghi, Yosra and Khademi, Alireza and Mohd. Yusof, Noordin and Renani, Nafiseh Ghorbani and Syed Hassan, Syed Ahmad Helmi (2015) Production layout optimization for small and medium scale food industry. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22-24 Sep 2014, Johor Bahru, Johor.

Oladokun, Olanrewaju Sulaiman and Abdul Raship, Norlaily and Abd. Kader, Ab. Saman and Azman, Shamila and D'Angelo, Rosa and Adriano, Madonna and Kong, Fah Tee (2015) Macro algae: biodiversity, usefulness to humans and spatial study for site selection in oceanic farming. Journal of Biodiversity & Endangered Species . pp. 1-6. ISSN 2332-2543

Olanrewaju, Oladokun Sulaiman and Kong, Fah Tee and Kader, A. S. A. (2015) Water quality test and site selection for suitable species for seaweed farm in east coast of Malaysia. Biosciences Biotechnology Research Asia, 12 . pp. 33-39. ISSN 0973-1245

Onn, Irwan Herman and Ahmad, Norhayati and Tamin, Mohd. Nasir (2015) Fatigue characteristics of dual-phase steel sheets. Journal of Mechanical Science and Technology, 29 (1). pp. 51-57. ISSN 1738-494X

Osman, K. and Faudzi, A. A. M. and Rahmat, M. F. and Suzumori, K. (2015) Intelligent pneumatic assisted therapy on ankle rehabilitation. In: 14th IEEE/RAS-EMBS International Conference on Rehabilitation Robotics, ICORR 2015, 11-14 Aug 2015, Singapore.

Othman, Abdul Muta'Ali and Liew, Yong Kian (2015) Computer tools and thinking pattern in ideation process. In: 4th International Conference of Applied and Creative Art, 22-23 Oct, 2015, Sarawak, Malaysia.

Padzillah, M. H. and Rajoo, Srithar and Martinez-Botas, R. F. (2015) Experimental and numerical investigation on flow angle characteristics of an automotive mixed flow turbocharger turbine. Jurnal Teknologi, 77 (8). pp. 7-12. ISSN 2180-3722

Padzillah, M. H. and Rajoo, S. and Martinez Botas, R. F. (2015) Drawbacks on the application of nozzle vanes in turbocharger turbine under pulsating flow conditions. In: Symposium on Engine Boosting and Energy Recovery 2015, 15-16 Sept, 2015, Skudai, Johor.

Padzillah, M. H. and Rajoo, S. and Martinez-Botas, R. F. (2015) Phase shift methodology assessment of an automotive mixed flow turbocharger turbine under pulsating flow conditions. Jurnal Teknologi, 77 (8). pp. 29-35. ISSN 0127-9696

Padzillah, Muhamad Hasbullah and Rajoo, Srithar and Mingyang, Yang and Martines-Botas, Ricardo (2015) Influence of pulsating flow frequencies towards the flow angle distributions of an automotive turbocharger mixed-flow turbine. Energy Conversion and Management, 98 (1). pp. 449-462. ISSN 0196-8904

Paramasivam, Kishokanna and Mohamed, Danial and Romagnoli, Alesssandro and Rajoo, Sritha and Mohd. Noor, Alias (2015) Aeroacoustics characterization methodology applicable to turbocharger compressor. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7773-7779. ISSN 1819-1894

Parnon, Afif Aimaduddin (2015) Productivity improvements using lean practices at Japanese electrical and electronics manufacturing. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Piroozfard, Hamed and Wong, Kuan Yew (2015) Job shop scheduling problem with late work criterion. In: International Conference on Mathematics, Engineering and Industrial Applications, ICoMEIA 2014, 28-30 May 2014, Penang, Malaysia.

Piroozfard, Hamed and Wong, Kuan Yew (2015) Solving multi-objective job shop scheduling problems using a non-dominated sorting genetic algorithm. In: International Conference on Mathematics, Engineering and Industrial Applications 2014 (ICoMEIA 2014), 28–30 May 2014, Penang, Malaysia.

Porman, Jumari (2015) Numerical simulation of vortex combustion for various air-fuel configurations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Pourtousi, M. and Ganesan, P. and Kazemzadeh, A. and Sandaran, S. C. and Sahu, J. N. (2015) Methane bubble formation and dynamics in a rectangular bubble column: A CFD study. Chemometrics And Intelligent Laboratory Systems, 147 . pp. 111-120. ISSN 1697-439

Prawoto, Yunan and Alias, Amran (2015) Stress intensity factor and plastic zone of auxetic materials: a fracture mechanics approach to a chiral structure having negative poissons ratio. Mechanics of Advanced Materials and Structures, 22 (3). pp. 213-223. ISSN 1537-6494

Putra, A. M. S. and Harun, M. N. and Syahrom, Ardiyansyah and Abdul Kadir, M. R. (2015) Effect of radial and thickness of polyethylene on wear generation in total ankle replacement. In: Malaysian International Tribology Conference 2015, 16-17 Nov, 2015, Penang, Malaysia.

Rad, Mozafar Shokri (2015) Auxetic structures for energy absorption applications. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rad, Mozafar Shokri and Ahmad, Zaini (2015) Finite element modelling of different 2D re-entrant structures of auxetic materials. In: Second International Conference On Advances in Mechanical and Automation Engineering - MAE 2015, 18-19 April, 2015, Rome, Italy.

Rad, Mozafar Shokri and Ahmad, Zaini and Alias, Amran (2015) Computational approach in formulating mechanical characteristics of 3D star honeycomb auxetic structure. Advances In Materials Science And Engineering, 2015 . ISSN 1687-8434

Rahim, Herlina Abdul and Dalimi, Ahmad and Jaafar, Haliza (2015) Detecting drowsy driver using pulse sensor. Jurnal Teknologi, 73 (3). pp. 5-8. ISSN 0127-9696

Rahim, I. A. and Zain, M. Z. M. and Asmuin, N. Z. and Saad, M. S. M. (2015) Determination performance of thermoacoustic heat engine simulation by delta EC software. In: International Conference on Innovative Research, ICIR 2015, 14 - 16 May 2015, Iasi, Romania.

Rahim, Muhammad Roslan and Mohd. Jaafar, Mohammad Nazri (2015) Effect of flame angle using various swirler angle in combustion performance. Jurnal Teknologi, 72 (4). pp. 71-75. ISSN 0127-9696

Rahim, Muhammad Roslan and Mohd. Ja’afar, Mohammad Nazri (2015) Kesan sudut pusaran terhadap pembakaran menggunakan pemusar jejarian dwi aliran. Jurnal Teknologi, 77 (8). pp. 37-45. ISSN 2180-3722

Rahmat, Azmi and Mohammed, Kahtan S. and Dawood, Hasan I. and Al-Naib, Uday M. Basheer (2015) Microstructural characterizations and mechanical properties in friction stir welding technique of dissimilar (Al-Cu) sheets. Journal Of Applied Science And Agriculture, 10 (5). pp. 149-158. ISSN 1816-9112

Razavykia, Abbas and Farahany, Saeed and Mohd. Yusof, Noordin (2015) Evaluation of cutting force and surface roughness in the dry turning of Al-Mg2Si in-situ metal matrix composite inoculated with bismuth using DOE approach. Measurement: Journal of the International Measurement Confederation, 76 . pp. 170-182. ISSN 0263-2241

Redzuan, Norizah and Cham, Chern Hau and Foo, Jin Hoe and Zakaria, Khidzir (2015) 3D CAD model physical analysis using additive manufacturing process. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Rezaei, Ghasem (2015) Relationship between culture of excellence and organizational performance with knowledge sharing as mediating role. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rezaei, J. and Shahbakhti, M. and Bahri, B. and Aziz, A. A. (2015) Performance prediction of HCCI engines with oxygenated fuels using artificial neural networks. Applied Energy, 138 . pp. 460-473. ISSN 0306-2619

Rhubbindran, Rhubbindran and Mat, Shabudin (2015) Effects of reynolds number on flow separation above generic half span transport aircraft model. Journal Of Aeronautical Science And Engineering, 1 . pp. 7-13. ISSN 2442-6407

Roslan, I. S. and Muhamad Said, Mohd. Farid and Abu Bakar, Saiful Anuar (2015) Conceptual design of remotely operated underwater vehicle. Journal of Transport System Engineering, 1 (2). pp. 15-19. ISSN 2289-9790

Ruzi, Nuur 'Azzalia and Yahya, Wira Jazair and Abd. Kadir, Hasannuddin and Mazlan, Nurul Aiyshah (2015) Emission of diesel engine running on emulsion fuel made from low grade diesel fuel. Journal Of Advanced Research In Material Science, 15 (1). pp. 1-8. ISSN 2289-7992

Saad, M. S. and Jamaluddin, H. and Darus, I. Z. M. (2015) Online monitoring and self-tuning control using pole placement method for active vibration control of a flexible beam. Journal Of Vibration And Control, 21 (3). pp. 449-460. ISSN 1077-5463

Saad, Mohd. Sazli and Jamaluddin, Hishamuddin and Mat Darus, Intan Zaurah (2015) Active vibration control of a flexible beam using system identification and controller tuning by evolutionary algorithm. Journal of Vibration and Control, 21 (10). pp. 2027-2042. ISSN 1077-5463

Sabrudin, Mohd. Aizad Sazrul and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain (2015) Effects of asymmetric intake valve lift configuration towards in-cylinder air flow behavior. In: International Conference on Computational Fluid Dynamics in Research & Industry 2015, 17-19 Aug, 2015, Kuala Lumpur, Malaysia.

Sadegh, Omidreza (2015) Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadiq Aliyu, Abubakar and Abdul Aziz, Azhar and Yahya, Adibah and Abdul Lattiff, Zulkanain (2015) Potential of oil palm frond liquid extract and fiber as feedstock for bio-butanol production. Jurnal Teknologi, 74 (10). pp. 63-67. ISSN 0127-9696

Sadir, Sahba (2015) Interfacial wicking flow through hierarchical structure of natural cellulose fibers for biomedical microfluidic devices. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saeed, Khurram (2015) Evaluating the renewable energy sources in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Safari, Habib and Sharif, Safian and Izman, S. and Jafari, Hassan (2015) Surface integrity characterization in high-speed dry end milling of Ti-6Al-4V titanium alloy. International Journal of Advanced Manufacturing Technology, 78 (1-4). pp. 651-657. ISSN 0268-3768

Saggaff, A. and Lawan, M. M. and Tahir, M. M. and Mirza, J. (2015) Influence of longitudinal spaced bolted shear connectors on composite beam integrated with concrete and cold-formed steel. ARCHITECTURAL ENGINEERING AND NEW MATERIALS . pp. 68-74.

Said, Mazuriah and Mat, Shabudin and Mansor, Shuhaimi and Abdul Latif, Ainullotfi and Mat Lazim, Tholudin (2015) Reynolds number effects on flow topology above blunt-edge delta wing VFE-2 configurations. In: American Institute of Aeronautics and Astronautics (Aiaa Conference) 2015, 5-9 Jan, 2015, United States.

Said, N. H. and Ani, Farid Nasir and Muhammad Said, Mohd. Farid (2015) Review of the production of biodiesel from waste cooking oil using solid catalysts. Journal of Mechanical Engineering and Sciences, 8 . pp. 1302-1311. ISSN 2289-4659

Salman, B. H. and Mohammed, Hussein A. and Munisamy, Kannan M. and Kherbeet, Aqeel S. (2015) Three-Dimensional Numerical Investigation of Nanofluids Flow in Microtube with Different Values of Heat Flux. Heat Transfer - Asian Research, 44 (7). pp. 599-619. ISSN 1099-2871

Salman, B.H. and Mohammed, Hussein A. and Kherbee, A. Sh and Ahmed, Hamdi E. (2015) The effect of geometrical parameters on enhancing the heat transfer inside a microtube. International Journal Of Heat And Technology, 33 (3). pp. 79-84. ISSN 3924-80

Samion, Syahrullail and Che Sidik, Nor Azwadi and Ahmad, Noor Afifah (2015) Natural convection of alumina-distilled water nanofluid in cylindrical enclosure: an experimental study. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 12 (1). pp. 1-10. ISSN 2289-7879

Samion, Syahrullail and Musa, Mohamad Nor and Ansorudin, Ruwaida and Mohd. Salleh, Zuan Azhary (2015) The effect of adding diffuser by experimental. Journal Of Advanced Research In Applied Mechanics, 14 (1). pp. 18-24. ISSN 2289-7895

Samion, Syahrullail and Musa, Mohamad Nor and Mohd. Salleh, Zuan Azhary and Abdul Rahim, Erween and Mahyidin, Mohd. Khairul Anuar (2015) A study of float wave energy converter (FWEC) model. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 1 (1). pp. 40-49. ISSN 2462-1943

Samion, Syahrullail and Musa, Mohamad Nor and Mohd. Salleh, Zuan Azhary and Abdul Rahim, Erween and Saiman, Sofea Hanum (2015) Flow analysis of cooling water in the gas turbine fin fan cooler at utilities plant. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 14 (1). pp. 8-23. ISSN 2289-7879

Samiran, Nor Afzanizam and Mohd. Jaafar, Mohammad Nazri and Chong, Cheng Tung and Ng, Jo Han (2015) A review of palm oil biomass as a feedstock for syngas fuel technology. Jurnal Teknologi, 72 (5). pp. 13-18. ISSN 0127-9696

Samsubaha, Muhammad Fauzi (2015) Study on the performance of biodiesel blend Jathropa oil in a combustion system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Samuri, Mohamad Faisal and Muhamad Said, Mohd. Farid and Mohamad Shafie, Nur Adila and Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar (2015) Intake port flow study on cylinder head using flowbench. Journal of Transport System Engineering, 2 (2). pp. 29-35. ISSN 2289-9790

Sandhu, Fargham and Selamat, Hazlina and Md. Sam, Yahaya (2015) Antilock braking system using dynamic speed estimation. Jurnal Teknologi, 72 . pp. 45-50. ISSN 0127-9696

Sari, Emelia and Mohamed Shaharoun, Awaluddin and Ma'aram, Azanizawati and Mohd. Yazid, A. (2015) Sustainable maintenance performance measures: A pilot survey in Malaysian automotive companies. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22-24 Sep 2014, Johor Bahru, Johor.

Sathishkumar, P. and Arulkumar, M. and Ashokkumar, V. (2015) Modified phyto-waste Terminalia catappa fruit shells: a reusable adsorbent for the removal of micropollutant diclofenac. Rsc Advances, 5 (39). pp. 30950-30962. ISSN 2046-2069

Saud, S. N. and Hamzah, E. and Abubakar, T. and Bakhsheshi-Rad, H. R. (2015) Correlation of microstructural and corrosion characteristics of quaternary shape memory alloys Cu-Al-Ni-X (X=Mn or Ti). Transactions of Nonferrous Metals Society of China, 25 (4). pp. 1158-1170. ISSN 1003-6326

Saud, Safaa N. and Hamzah, E. and Abubakar, T. and Farahany, S. and Bakhsheshi-Rad, H. R. (2015) Effects of quenching media on phase transformation characteristics and hardness of Cu-Al-Ni-Co shape memory alloys. Jourl Of Materials Engineering And Performance, 24 (4). pp. 1522-1530. ISSN 1059-9495

Saud, Safaa Najah and Abu Bakar, Tuty Asma and Hamzah, Esah and Ibrahim, Mustafa Khaleel and Bahador, Abollah (2015) Effect of quarterly element addition of cobalt on phase transformation characteristics of Cu-Al-Ni shape memory alloys. Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science, 46 (8). pp. 3528-3542. ISSN 1073-5623

Saud, Safaa Najah and Hamzah, Esah Binti and Abubakar, Tuty Asma Abu and Bakhsheshi-Rad, Hamid Reza (2015) Thermal aging behavior in Cu-Al-Ni-xCo shape memory alloys. Journal of Thermal Analysis and Calorimetry, 119 (2). pp. 1273-1284. ISSN 1388-6150

Saud, S. N. and Hamzah, E. and Abubakar, T. and Bakhsheshi-Rad, H. R. (2015) Microstructure and corrosion behaviour of Cu-Al-Ni shape memory alloys with Ag nanoparticles. Materials And Corrosion-Werkstoffe Und Korrosion, 66 (6). pp. 527-534. ISSN 9441-3441

Saud, Safaa N. and Hamzah, Esah and Abubakar, Tuty and Ibrahim, Mustafa K. (2015) Effect of a fourth alloying element on the microstructure and mechanical properties of Cu-Al-Ni shape memory alloys. Jourl Of Materials Research, 30 (14). pp. 2258-2269. ISSN 8839-514

Sek, Wei Yee (2015) Business performance analysis for small and medium enterprises through system dynamics modelling: a case study of chemical production industry. Masters thesis, Universiti Teknologi Malaysia.

Serevina, Vina and Sumeru, Sumeru and Abdul Aziz, Azhar and Nasution, Henry (2015) Performance comparison of automotive air conditioner using various refrigerants. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Serevina, Vina and Sumeru, Sumeru and Nasution, Henry (2015) Effect of refrigerant on the exergy loss and performance in air conditioner using ejector as expansion device. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Shaari, Muhammad Syafiq and Mohd. Ghazali, Normah and Jamaludin, Hishamuddin (2015) Analysis of different friction factor correlations on the frictional pressure drop of two-phase flow ammonia-cooled minichannel. In: The 8th International Meeting on Advances in Thermofluids (IMAT), 11-12 Nov, 2015, Indonesia.

Shabara, H. M. and Yaakob, O. B. and Ahmed, Y. M. and Elbatran, A. H. (2015) CFD simulation of water gravitation vortex pool flow for mini hydropower plants. Jurnal Teknologi, 74 (5). pp. 77-81. ISSN 0127-9696

Shabara, H. M. and Yaakob, O. B. and Ahmed, Y. M. and Elbatran, A. H. and Faddir, M. S. M. (2015) CFD validation for efficient gravitational vortex pool system. Jurnal Teknologi, 74 (5). pp. 97-100. ISSN 1279-696

Shaf'i, Herul Azrul (2015) Assessment of onshore wind energy potential in Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaharuddin, Nik Mohd. Ridzuan (2015) Active vibration control of transverse vibrating segmented marine riser. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shaharuddin, Nik Mohd. Ridzuan and Mat Darus, Intan Zaurah (2015) Experimental study of vortex-induced vibrations of flexibly mounted cylinder in circulating water tunnel. Acta Mechanica, 226 (11). pp. 3795-3806. ISSN 0001-5970

Shahri, Seyed Morteza Ghaffari and Idris, Mohd. Hasbullah and Jafari, Hassan and Gholampour, Babak and Assadian, Mahtab (2015) Effect of solution treatment on corrosion characteristics of biodegradable Mg-6Zn alloy. Transactions of Nonferrous Metals Society of China, 25 (5). pp. 1490-1499. ISSN 1003-6326

Sharafatmandjoor, Shervin and Che Sidik, Nor Azwadi and Boroujerdi, Hora Chitsaz and Bidokhti, Ali Akbar (2015) Analysis of the curvature field of a density-driven convective flow. Numerical Heat Transfer Part A-Applications, 67 (5). pp. 589-596. ISSN 1040-7782

Sharafatmandjoor, Shervin and Che Sidik, Nor Azwadi and Fathalizadeh, Hamidreza (2015) Imposition of the no-slip boundary condition via modified equilibrium distribution function in Lattice Boltzmann method. International Communications in Heat and Mass Transfer, 62 . pp. 33-36. ISSN 0735-1933

Sharafatmandjoor, Shervin and Che Sidik, Nor Azwadi and Sabetghadam, Fereidoun (2015) Analysis of the applicability of the lattice Boltzmann method in targeting a chaotic flame front model. Numerical Heat Transfer Part A : Applications, 67 (5). pp. 597-603. ISSN 1040-7782

Sharafatmandjoor, Shervin and Taeibi-Rahni, Mohammad and Che Sidik, Nor Azwadi (2015) Formation and breakup patterns of falling droplet. Numerical Heat Transfer Part A: Applications, 68 (9). pp. 1023-1030. ISSN 1040-7782

Sharifishourabi, Gholamali and Ayob, Amran and Gohari, Soheil and Yahya, Mohd. Yazid and Sharifi, Shokrollah and Vrcelj, Zora (2015) Flexural behavior of functionally graded slender beams with complex cross-section. Journal of Mechanics of Materials and Structures, 10 (1). pp. 1-16. ISSN 1559-3959

Shirdar, Mostafa Rezazadeh and Izman, Sudin and Taheri, Mohammad Mahdi (2015) Effect of post-treatment techniques on corrosion and wettability of hydroxyapatite-coated Co–Cr–Mo Alloy. Arabian Journal for Science and Engineering, 40 (4). pp. 1197-1203. ISSN 2193-567X

Shirdar, Mostafa Rezazadeh and Sudin, Izman and Taheri, Mohammad Mandi and Keyvanfar, Ali and Mohd. Yusop, Mohd. Zamri and Abdul Kadir, Mohammed Rafiq (2015) A novel hydroxyapatite composite reinforced with titanium nanotubes coated on Co-Cr-based alloy. Vacuum, 122 . pp. 82-89. ISSN 0042-207X

Souf-Aljen, Atef S. and Maimun, Adi and Samad, Rahim and Jaswar, Jaswar (2015) Dynamic performance simulation of hydraulic transmission for low speed vertical axis marine current turbine using MATLAB simulink. Jurnal Teknologi, 74 (5). pp. 45-51. ISSN 1279-696

Suhaimi, Mohd. Suardi and Saat, Aminuddin and Abd. Wahid, Mazlan (2015) Flame propagation and burning rates of methane-air in a closed combustion vessel. In: 8th International Meeting of Advances in Thermofluid, 11-12 Nov, 2015, Indonesia.

Suhiri, Farahdatul Sahuda (2015) Thermodynamic cycle analysis of Pulse Detonation Engine (PDE) by biogas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sukri, Mohamad Firduas and Musa, Md. Nor and Senawi, Mohd. Yusoff and Nasution, Henry (2015) Achieving a better energy-efficient automotive air-conditioning system: a review of potential technologies and strategies for vapor compression refrigeration cycle. Energy Efficiency, 8 (6). pp. 1201-1229. ISSN 1570-646X

Sulaiman, Nabila (2015) CFD study on aortic cannula (flow characteristics). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, O. Olanrewaju and Amagee, A. and Abd. Kader, Ab. Saman (2015) Experimental study of native macro algae species identification for open water farming for biofuel plant energy feed stock. Biosciences Biotechnology Research Asia, 12 . pp. 799-806. ISSN 0973-1245

Sulaiman, Oladokun Olanrewaju and Abd. Kader, Ab. Saman and Azman, Shamila (2015) Study of macro algae as marine biomass energy source. Journal of Aquaculture & Marine Biology, 2 (1). pp. 1-4. ISSN 2378-3184

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishammuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Dynamic tire force control for light-heavy duty truck using semi active suspension system. In: 2nd International Conference on Computer, Communications, and Control Technology, I4CT 2015, 21 April 2015 - 23 April 2015, Kuching, Sarawak, Malaysia.

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishammuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Semi active suspension magnetorheological damper control using quarter-vehicle model. In: The 4th International Conference on Computer Science & Computational Mathematics (ICCSCM 2015), 7-8 May, 2015, Langkawi, Malaysia.

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Tire force control for semi active magnetorheological damper suspension system using quarter heavy vehicle model. In: Applied Mechanics and Materials, 2 Sept, 2015, Kuala Lumpur, Malaysia.

Sulaiman, Syabillah and Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar (2015) Tyre Force Control strategy for semi-active magnetorheological damper suspension system for light-heavy duty truck. International Journal of Vehicle Autonomous Systems, 13 (1). pp. 65-90. ISSN 1471-0226

Sulaimon, Shodiya and Abdul Aziz, Azhar and Nasution, Henry and Darus, Amer Nordin (2015) Empirical correlations for sizing adiabatic capillary tubes using conventional refrigerants and their alternatives. Heat Transfer Research, 46 (5). pp. 483-501. ISSN 2162-6561

Suliman, Ali H. Ahmed and Jajarmizadeh, Milad and Harun, Sobri and Mat Darus, Intan Zaurah (2015) Comparison of semi-distributed, GIS-based hydrological models for the prediction of streamflow in a large catchment. Water Resources Management, 29 (9). pp. 3095-3110. ISSN 0920-4741

Sumeru, Sumeru (2015) Design and analysis of ejector as an expansion device in a split-type air conditioner. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sumeru, Sumeru and Pramudantoro, Triaji P. and Ani, Farid Nasir and Nasution, Henry (2015) Enhancing air conditioning performance using TiO2 nanoparticles in compressor lubricant. In: 2nd International Materials, Industrial & Manufacturing Engineering Conference (MIMEC2015), 4-6 Feb, 2015, Indonesia.

Supriyo, B. and Tawi, K. B. and Che Kob, M. S. and Mazali, I. I. and Che Kob, M. S. (2015) Pulley's clamping force and axial position measurements for electro-mechanical continuously variable transmission in automotive applications. In: 6th International Conference on Information Technology and Electrical Engineering, ICITEE 2014, 7 October 2014 - 8 October 2014, Yogyakarta, Indonesia.

Supriyo, Bambang and Tawi, Kamarul Baharin and Che Kob, Mohd. Sabri and Mazali, Izhari Izmi (2015) Secondary pulley clamping force controller for electro-mechanical dual acting pulley continuously variable transmission system. ARPN Journal of Engineering and Applied Sciences, 10 (17). pp. 7734-7738. ISSN 1819-6608

Surajudeen, Ahmad Tijani and Ebrahimi, Mansoureh and Ishola, Abdullahi Saliu and Abdul Azeez, Yusuf (2015) The quranic perspective on the science of water transportation. Nova Journal Of Sufism And Spirituality, 3 (1). pp. 1-5. ISSN 2368-6766

Surendran Pillay, S. Sadish Kumar (2015) Biogas generation from palm oleochemical effluent for steam production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Taheri, Mohammad Mahdi and Abdul Kadir, Mohammed Rafiq and Shokuhfar, Tolou and Hamlekhan, Azhang and Shirdar, Mostafa Rezazadeh and Naghizadeh, Farnaz (2015) Fluoridated hydroxyapatite nanorods as novel fillers for improving mechanical properties of dental composite: synthesis and application. Materials and Design, 82 . pp. 119-125. ISSN 0264-1275

Tan, Feng Xian and Rajoo, Srithar and Chiong, Meng Soon and Chong, Cheng Tung and Romagnoli, Alessandro and Ochiai, Masayuki and Paramasivam, Kishokanna and Teo, Aaron Edward (2015) Design of combustor for micro gas turbine test rig and its performance prediction. Jurnal Teknologi, 77 (8). pp. 113-117. ISSN 0127-9696

Tawi, K. B. and Supriyo, B. and Ariyono, S. and Husain, N. A. and Hamid, A. R. A. and Azlan, M. A. and Mazali, I. I. and Kob, M. S. C. (2015) Design of electro-mechanical dual-acting pulley continuously variable transmission. Journal of Mechanical Engineering and Sciences (JMES), 8 . pp. 1332-1342. ISSN 2289-4659

Thangavelu, Saravana Kannan and Piraiarasi, C. and Ahmed, Abu Saleh and Ani, Farid Nasir (2015) Compatibility of elastomers in bio-diesel diesel bioethanol blend (BDE). In: Advanced Materials Research, 22-26 Sept, 2015.

Thangavelu, Saravana Kannan and Piraiarasi, C. and As Ahmed, As Ahmed and Ani, Farid Nasir (2015) Corrosion behavior of copper in biodiesel diesel bioethanol (BDE). In: Advanced Materials Research, 2015.

Tok, H. Y. and Hamzah, Esah and Bakhsheshi-Rad, Hamid Reza (2015) The role of bismuth on the microstructure and corrosion behavior of ternary Mg-1.2Ca-xBi alloys for biomedical applications. Journal of Alloys and Compounds, 640 . pp. 335-346. ISSN 9258-388

Tok, Hong Yuan (2015) Microstructures and corrosion behavior of biodegradable Mg–Ca–xBi AND Mg–Ca–Zn–xBi alloys for biomedical implant application. Masters thesis, Universiti Teknologi Malaysia.

Ubaidillah, Ubaidillah and Imaduddin, Fitrian and Nizam, Muhammad Khair and Mazlan, Saiful Amri (2015) Response of a magnetorheological brake under inertial loads. International Journal on Electrical Engineering and Informatics, 7 (2). pp. 308-322. ISSN 2085-6830

Vanaki, Sh. M. and Mohammed, H. A. (2015) Numerical study of nanofluid forced convection flow in channels using different shaped transverse ribs. International Communications in Heat and Mass Transfer, 67 . pp. 176-188. ISSN 0735-1933

Wahab, Muhammad Faiz and Aung, Lwin Moe and Abu, Aminudin and Yaacob, Zulkifli and Legowo, Ari (2015) Development of automated parallel parking system in small mobile vehicle. In: 2015 Advanced Research in Material Sciences, Manufacturing, Mechanical and Mechatronics Engineering Technology International Conference (AR4MET'2015), 2-4 Jun, 2015, Bali, Indonesia.

Waheed, Muneer Naji and Abu Bakar, Abd. Rahim and Abdul Hamid, Mohd. Kameil (2015) Disc brake squeal occurrences under dry and wet brake pad conditions. In: The 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Wan Ali, Wan Khairuddin and Kiang, Long Ang and Mohd. Jaafar, Mohammad Nazri (2015) Experimental solid and liquid propellant rocket development in Universiti Teknologi Malaysia: 1992-2011. Jurnal Teknologi, 73 (1). pp. 35-52. ISSN 2180-3722

Wan Omar, Wan Zaidi and Ali, Belhocine (2015) Numerical solution of extended graetz problem by orthogonal collocation and Crank-Nicholson method. American Journal Of Heat And Mass Transfer, 2 (3). pp. 146-164. ISSN 2374-5398

Wan Shamsuri, Wan Nurulhuda and Abd. Kader, Ab. Saman and Oladokun, Sulaiman (2015) Liquefied natural gas (LNG) safe loading and unloading model in port operation. Journal Of Ocean, Mechanical & Aerospace - Science And Engineering, 23 . pp. 7-15. ISSN 2354-7065

Wang, Zhipeng and Ogata, Hironori and Morimoto, Shingo and Fujishige, Masatsugu and Takeuchi, Kenji and Muramatsu, Hiroyuki and Hayashi, Takuya and Ortiz Medina, Josue and Mohd. Yusop, Mohd. Zamri and Tanemura, Masaki and Terrones, Mauricio and Hashimoto, Yoshio and Endo, Morinobu (2015) Microwave plasma-induced graphene-sheet fibers from waste coffee grounds. Journal of Materials Chemistry A, 3 (28). pp. 14545-14549. ISSN 1998-4448

Wee, Y. C. and Abubakar, T. and Hamzah, Esah and Saud, Safaa N. (2015) Phase transformation and microstructure behaviour of Cu-Al-Ni shape memory alloys incorporated with cobalt addition. Jurnal Teknologi, 74 (10). pp. 53-56. ISSN 1279-696

Widodo, Widodo (2015) Evaluation of hole quality on micro drilling AISI 304 austenitic stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Willberg, Christian and Duczek, Sascha and Vivar-Pérez, Juan Miguel and Ahmad, Zair Asrar (2015) Simulation methods for guided wave-based structural health monitoring: a review. Applied Mechanics Reviews, 67 (1). ISSN 0003-6900

Wong, K. J. and Johar, M. and Gong, X. J. and Aivazzadeh, S. and Tamin, M. N. (2015) Influence of water absorption on Mode I delamination in carbon/epoxy composite laminates. In: International Conference on Mechanical Engineering and Advanced Materials (ICME-AM 2015), 3-4 Dec, 2015, Sabah, Malaysia.

Wong, K. J. and Tamin, M. N. (2015) Non-Fickian moisture uptake characterisation of epoxy-based moulding compounds with thickness effect. In: 36th IEEE International Electronics Manufacturing Technology Conference, IEMT 2014, 11 November 2014 - 13 November 2014, Johor, Malaysia.

Wong, Kuan Yew and Tan, Li Pin and Lee, Cheng Sheng and Wong, Wai Peng (2015) Knowledge management performance measurement: measures, approaches, trends and future directions. Information Development, 31 (3). pp. 239-257. ISSN 0266-6669

Wong, Prisillia Yuean Ning and Abdul Latiff, Zulkarnain and Abdul Aziz, Azhar and Mohd. Perang, Mohd. Rozi (2015) The effect of decontaminants on vehicle cooling system. In: The 8th International Meeting on Advances in Thermofluids 2015 (IMAT 2015), 11-12 Nov, 2015, Indonesia.

Yaakob, O. B. and Ahmed, Y. M. and Abd. Rahman, M. M. and Elbatran, A. H. (2015) Development of low wake wash hull form. Jurnal Teknologi, 74 (5). pp. 101-104. ISSN 0127-9696

Yaakob, Yazid and Kuwataka, Yu and Yusop, M. Zamri and Tanaka, Shihomi and Rosmi, Mohamad Saufi and Kalita, Golap and Tanemura, Masaki (2015) Room-temperature growth of ion-induced Si- and Ge-incorporated carbon nanofibers. Physica Status Solidi (B) Basic Research, 252 (6). pp. 1345-1349. ISSN 0370-1972

Yaakob, Yazid and Mohd. Yusop, Mohd. Zamri and Takahashi, Chisato and Rosmi, Mohamad Saufi and Kalita, Golap and Tanemura, Masaki (2015) In situ transmission electron microscopy of Ag-incorporated carbon nanofibers: the effect of Ag nanoparticle size on graphene formation. RSC Advances, 5 (8). pp. 5647-5651. ISSN 2046-2069

Yahaya, Bashir and Izman, S. and Idris, M. H. and Dambatta, M. S. (2015) Effects of activated charcoal on dewaxing time in microwave hybrid heating. In: 12th Global Conference on Sustainable Manufacturing, GCSM 2014, 22 September 2014 - 24 September 2014, Johor Bahru, Johor, Malaysia.

Yanagida, Naoto and Ohata, Makoto and Horisawa, Hideyuki and Kobayashi, Akira (2015) An Al - water fed DC arcjet. In: Advances in Applied Plasma Science, 31 Aug-4 Sept, 2015, Japan.

Yang, Mingyang and Martinez Botas, Ricardo and Rajoo, Srithar and Yokoyama, Takao and Ibaraki, Seiichi (2015) An investigation of volute cross-sectional shape on turbocharger turbine under pulsating conditions in internal combustion engine. Energy Conversion and Management, 105 . pp. 167-177. ISSN 0196-8904

Yap, Yoon Loy (2015) Intelligent neural network for modelling and control of an automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yasak, Mohd. Fuad (2015) Sustainable assessment in manufacturing company. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yong, T. M. and Hamzah, E. and Mat Yajid, M. A. (2015) Characterisation of nanocrystalline diamond coating deposited via hot filament chemical vapour deposition method with various seeding methods. Jurnal Teknologi, 75 (7). pp. 51-59. ISSN 0127-9696

Yong, Tze Mi (2015) Nanocrystalline diamond deposited on tungsten carbidecobalt substrates using hot filament chemical vapour deposition technique. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yousefi, Moslem and Darus, Amer Nordin and Yousefi, Milad and Hooshyar, Danial (2015) Multi-stage thermal-economical optimization of compact heat exchangers: a new evolutionary-based design approach for real-world problems. Applied Thermal Engineering, 83 . pp. 71-80. ISSN 1359-4311

Yousif, Qais Abid and Mohd. Ghazali, Normah and Zolpakar, Nor Atiqah and Novianto, Sentot and Pamitran, Agus Sujiantro and Ahmad, Robiah (2015) Modeling of the minimized two-phase frictional pressure drop in a small tube with different correlations. In: 1st ICRIL-International Conference on Innovation in Science and Technology (IICIST 2015), 20 April, 2015, Kuala Lumpur, Malaysia.

Zahraee, Seyed Mojib and Chegeni, Ali and Mohd. Rohani, Jafri (2015) Characterization of manufacturing system computer simulation using Taguchi method. Jurnal Teknologi, 72 (4). pp. 77-82. ISSN 0127-9696

Zaidan, Husain and Mohd. Ghazali, Normah and Ahmad, Robiah (2015) Optimization of a single phase rectangular microchannel heat sink cooling system. In: 8th International Meeting on Advances in Thermofluids, 11-12 Nov, 2015, Indonesia.

Zainal, Muhamad Nor Firdaus and Redzuan, Norizah and Misnal, Mohd. Fadthul Ikmal (2015) Brief review: cold plasma. Jurnal Teknologi, 74 (10). pp. 57-61. ISSN 0127-9696

Zainal, Nurezayana and Mohd. Zain, Azlan and Sharif, Safian (2015) Overview of artificial fish swarm algorithm and its applications in industrial problems. In: Applied Mechanics and Materials, 31 Jul - 1 Aug, 2015, Indonesia.

Zainal Abidin, Shaiful Fadzil and Muhammad Said, Mohd. Farid and Abdul Latiff, Zulkanain and Zahari, Izzarief and Said, M. (2015) The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation. Jurnal Teknologi, 77 (8). pp. 107-111. ISSN 0127-9696

Zaini, Ahmad and Mozafar, Shokri Rad (2015) New approach for fabrication of auxetic foam and determination of poisson's ratio. In: Applied Mechanics and Materials, 2015.

Zainordin, Ahmad Zaifazlin and Hudha, Khisbullah and Jamaluddin, Hishamuddin and Mat Nuri, Nur Rashid (2015) Design and characterisation of magnetorheological brake system. International Journal of Engineering Systems Modelling and Simulation, 7 (1). pp. 62-70. ISSN 1755-4535

Zakaria, Ahmad Syazni (2015) Design and development of low-cost friction stir welding. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Khidzir and Ismail, Zurina and Redzuan, Norizah and Dalgrano, K. W. (2015) Effect of wire EDM cutting parameters for evaluating of additive manufacturing hybrid metal material. In: MIMEC 2015, 4-5 Feb, 2015, Indonesia.

Zakaria, Khidzir and Redzuan, Norizah and Dalgrano, K. W. (2015) Metal fabrication evaluation through additive manufacturing process of Indirect Metal Laser Sintering. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Zakaria, Khidzir and Redzuan, Norizah and Foo, Jin Hoe and Cham, Chern Hau (2015) 3D CAD model physical analysis using aditive manufacturing process. In: ICAMT 2015, 20-22 Sept, 2015, Johor Bahru, Johor.

Zakaria, Mohd. Zakimi and Jamaluddin, Hishamuddin and Ahmad, Robiah and Harun, Azmi and Hussin, Radhwan and Mohd. Khalil, Ahmad Nabil and Md. Naim, Muhammad Khairy and Annuar, Ahmad Faizal (2015) Perturbation parameters tuning of multi-objective optimization differential evolution and its application to dynamic system modeling. Jurnal Teknologi, 75 (11). pp. 77-90. ISSN 0127-9696

Zardian, Mohsen Gol and Ayob, Amran (2015) Intelligent modelling and active vibration control of flexible manipulator system. Journal of Vibroengineering, 17 (4). pp. 1879-1891. ISSN 1392-8716

Zarzoor, Ahmed Kadhim (2015) Defect detection in pipeline using acoustic emission. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zulkifli, A. H. and Nasution, H. and Dahlan, A. A. and Abdul Aziz, A. (2015) In-cabin vehicle initial temperature control: a review. In: Proceedings of the 4th World Virtual Conference on Applied Sciences and Engineering Applications, 28-30 Nov, 2015, Kuala Lumpur, Malaysia.

Zulkifli, Amirah Haziqah and Dahlan, Afiq Aiman and Nasution, Henry and Abdul aziz, Azhar and Chin, Youk Sheong (2015) Performance analysis of passenger vehicle air conditioning system fitted with variable speed electric compressor. In: International Conference on Knowledge Transfer (ICKT'15), 1-3 Dec, 2015, Kuala Lumpur, Malaysia.

Zulkifli, Amirah Haziqah and Nasution, Henri and Dahlan, Afiq Aiman and Abdul Aziz, Azhar (2015) Direct current compressor for vehicle air conditioning system in non-electric vehicles. In: Seoul International Conference on Applied Science and Engineering, 27-29 June, 2015, South Korea.