Items where Year is 2011

Article

A. Rasid, Zainudin and Amran, Ayob and Zahari, Rizal and Mustapha, Faizal and Majid, Dalila and Varatharajoo, Renuganth (2011) Buckling and post buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 . pp. 530-535. ISSN 1013-9826

A. Rasid, Zainudin and Ayob, Amran and Zahari, Rizal and Mustafa, Faizal and Majid, Dalila and Varatharajoo, Renuganth (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. Key Engineering Materials, 471-47 . pp. 536-541. ISSN 1013-9826

Aarabi, Majid and Mat Saman, Muhamad Zameri and Khoei, M. R. and Kuan, Yew Wong and Beheshti, Hooshang M. and Zakuan, Norhayati (2011) Conceptual model for information systems of sustainable supply chain management. IEEE International Conference on Industrial Engineering and Engineering Management . pp. 303-307. ISSN 2157-3611

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran (2011) Buckling behavior of general dome ends under external pressure, using finite element analysis. Key Engineering Materials, 471-47 . pp. 833-838. ISSN 1013-9826

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran and Kohandel, Roya (2011) Imperialist competitive algorithm and its application in optimization of laminated composite structures. European Journal of Scientific Research, 55 (2). pp. 174-187. ISSN 1450-216X

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran and Kohandel, Roya (2011) Imperialist competitive algorithm and its application in optimization of lamited composite structures. European Journal of Scientific Research, 55 (2). pp. 174-187. ISSN 1450-216X

Abdul Hamid M.K. (2011) The effects of grit particle size on frictional characteristics of automotive braking system. Advanced Materials Research, 189-19 . pp. 3511-3516. ISSN 1022-6680

Abdul Kadir, Aini and Xun, Xu (2011) Towards high-fidelity machining simulation. Journal of Manufacturing Systems, 30 (3). pp. 175-186. ISSN 0278-6125

Abdul Munir, Fudhail and Che Sidik, Nor Azwadi and Nik Ibrahim, Nik Izual (2011) Numerical simulation of natural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Abdulrahman, A. S. and Ismail, Mohammad and Hussain, Mohammad Sakhawat (2011) Inhibiting sulphate attack on concrete by hydrophobic green plant extract. Advanced Materials Research, 250-25 . pp. 3837-3843. ISSN 1022-6680

Abdulrahman, A. S. and Ismail, Mohammad and Hussain, Mohammad Sakhawat (2011) Inhibition of corrosion of mild steel in hydrochloric acid by bambusa arundinacea. International Review of Mechanical Engineering (IREME), 5 (1). pp. 59-63. ISSN 1970-8734

Ahmad, Norhayati and Sueyoshi, H. (2011) Microstructure and mechanical properties of silicon nitride-titanium nitride composites prepared by spark plasma sintering. Materials Research Bulletin, 46 (3). pp. 460-463. ISSN 0025-5408

Ahmed, Iqbal and Idris, Ani and Mohd. Yusof, Noordin and Rajput, Rizwan (2011) High performance ultrafiltration membranes prepared by the application of modified microwave irradiation technique. Industrial & Engineering Chemistry Research, 50 (4). pp. 2272-2283. ISSN 0888-5885

Ahmed Eldrainy, Yehia Abdel Monem and M. Saqr, Khalid and Mohamed Aly, Hossam Said and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Azri (2011) Large Eddy simulation and prelimiry modeling of the flow downstream a variable geometry swirler for gas turbine combustors. International Communications in Heat and Mass Transfer, 38 (8). pp. 1104-1109. ISSN 0735-1933

Ahmed Eldrainy, Yehia Abdel Monem and Mohd. Jaafar, Mohammad Nazri and Mat Lazim, Tholudin (2011) Cold flow investigation of primary zone characteristics in combustor utilizing axial air swirler. Proceedings of World Academy of Science, Engineering and Technology, 74 . pp. 977-983. ISSN 2070-3740

Akhavan Farid, Ali and Sharif, Safian and Idris, Mohd. Hasbullah (2011) Chip morphology study in high speed drilling of Al-Si alloy. International Journal of Advanced Manufacturing Technology, 57 (5-8). pp. 555-564. ISSN 0268-3768

As'arry, Azizan and Md. Zain, Mohd. Zarhamdy and Mailah, Musa and Hussein, Mohamed and Mohd. Yusop, Zulkifli (2011) Active tremor control in 4-DOFs biodynamic hand model. International Journal of Mathematical Models and Methods in Applied Sciences, 5 (6). pp. 1068-1076. ISSN 1998-0140

Ashrul Ishak, Mohamad Shaiful and Mohd. Jaafar, Mohammad Nazri (2011) The reduction of noxious emissions using urea based on selective non-catalytic reduction in small scale bio fuel combustion system. Modern Applied Science, 5 (2). pp. 108-112. ISSN 1913-1844

Azadnia, A. H. (2011) Supplier selection: a hybrid approach using electre and fuzzy clustering. Communications in Computer and Information Science, 252 (2). pp. 663-676. ISSN 1865-0929

Azadnia, Amir Hossein and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Hemdi, Abdul Rahman (2011) Integration model of fuzzy c means clustering algorithm and topsis method for customer lifetime value assessment. IEEE International Conference on Industrial Engineering and Engineering Management . pp. 16-20. ISSN 2157-3611

Aziz, Amir and Wan Ali, Wan Khairuddin (2011) The study of burning characteristics of Ap/Htpb/Al basic components of a composite propellant. Journal of Aerospace Engineering & Technology, 2231-0 (1). pp. 21-26. ISSN 2231-038X

Bakhsheshi Rad, Hamid Reza and Monshi, Ahmad and Idris, Mohd. Hasbullah and Abdul Kadir, Mohammed Rafiq and Jafari, Hassan (2011) Premature failure analysis of forged cold back-up roll in a continuous tandem mill. Materials and Design, 32 (8-9). pp. 4376-4384. ISSN 0264-1275

Balajt, Rajoo and Yaakob, Omar (2011) Emerging ballast water treatment technologies: a review. Journal of Sustainability Science and Management, 6 (1). pp. 126-138. ISSN 1823-8556

Behrouzi, Farzad and Kuan, Yew Wong and Behrouzi, Farshad (2011) A study on lean supply chain performance measures of SMES in the automotive industry. IEEE International Conference on Industrial Engineering and Engineering Management . pp. 237-241. ISSN 2157-3611

Behrouzi, Farzad and Kuan, Yew Wong (2011) An investigation and identification of lean supply chain performance measures in the automotive SMES. Scientific Research and Essays, 6 (24). pp. 5239-5252. ISSN 1992-2248

Behrouzi, Farzad and Wong, Kuan Yew (2011) Lean performance evaluation of manufacturing systems: A dynamic and innovative approach. Procedia Computer Science, 3 . pp. 388-395. ISSN 1877-0509

Chaudhary, K. T. and Qindeel, Rabia and Saktioto, Saktioto and Hussain, Mohd. Sakhawat and Ali, Jalil and Yupapin, P. P. (2011) Graphite thin film deposition using laser induced plasma. Procedia Engineering, 8 . pp. 423-427. ISSN 1877-7058

Che Sidik, Nor Azwadi and Reza Attarzadeh, Seyed Mohamad (2011) An accurate numerical prediction of solid particle fluid flow in a lid-driven cavity. International Journal of Mechanics, 5 (3). pp. 123-128. ISSN 1998-4448

Che Sidik, Nor Azwadi and Nik Ibrahim, Nik Izual (2011) Numerical simulation of rural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Cheng, Tung Chong and Hochgreb, Simone (2011) Measurements of lamir flame speeds of acetone/methane/air mixtures. Combustion and Flame, 158 . pp. 490-500. ISSN 0010-2180

Chong, Cheng Tung and Hochgreb, Simone (2011) Measurements of laminar flame speeds of acetone/methane/air mixtures. Combustion and Flame, 158 (3). pp. 490-500. ISSN 0010-2180

Chong, Cheng Tung and Hochgreb, Simone (2011) Measurements of laminar flame speeds of liquid fuels: Jet-A1, diesel, palm methyl esters and blends using particle imaging velocimetry (PIV). Proceedings of the Combustion Institute, 33 (1). pp. 979-986. ISSN 1540-7489

Chuen, Tse Kuah and Kuan, Yew Wong (2011) Efficiency assessment of universities through data envelopment analysis. Procedia Computer Science, 3 . pp. 499-506. ISSN 1877-0509

Chuen, Tse Kuah and Kuan, Yew Wong (2011) A review of data envelopment analysis models for handling data variations. IEEE International Conference on Industrial Engineering and Engineering Management . pp. 151-155. ISSN 2157-3611

Eldrainy, Yehia A. and Saqr, Khalid M. and Aly, Hossam S. and Mat Lazim, Tholudin and Mohd. Jaafar, Mohammad Nazri (2011) Large eddy simulation and preliminary modeling of the flow downstream a variable geometry swirler for gas turbine combustors. International Communications in Heat and Mass Transfer, 38 (8). pp. 1104-1109. ISSN 0735-1933

Esmaeili, M. and Ochsner, Andreas (2011) A one-dimensional implementation of a coupled elasto-plastic model for ductile damage. Materialwissenschaft Und Werkstofftechnik, 42 (5). pp. 444-451. ISSN 0933-5137

Farahany, Saed and Ourdjini, Ali and Idris, Mohd. Hasbullah (2011) Poisoning effect of bismuth on modification behaviour of strontium in lm25 alloy. Bulletin of Materials Science, 34 (6). pp. 1223-1231. ISSN 0250-4707

Farahany, Saeed and Aghaie-Khafri, M. and Ourdjini, Ali and Idris, Mohd. Hasbullah (2011) Influence of heat treatment on properties of hot isostatically pressed turbine blade superalloy in738. Advanced Materials Research, 264-26 . pp. 502-507. ISSN 1022-6680

Farahany, Saeed and Ourdjini, Ali and Idris, Mohd. Hasbullah and Thai, L. T. (2011) Effect of bismuth on microstructure of unmodified and Sr-modified Al-7Si-0.4Mg alloys. Transactions of Nonferrous Metals Society of China (English Edition), 21 (7). pp. 1455-1464. ISSN 1003-6326

Fathullah, M. and Abd. Rahim, Shayfull Zamree and Sharif, Safian and Shuaib, N. A. and Mat Saad, Mohd. Nasir (2011) A study on two plate and three plate mold of ultra thin plates in minimizing warpage issue. International Review of Mechanical Engineering (IREME), 5 (7). pp. 1189-1195. ISSN 1970-8734

Fiedler, T. and Belova, I. V. and Ochsner, A. and Murch, G. E. (2011) Lattice Monte Carlo analysis of thermal diffusion in multi-phase materials. Advanced Structured Materials, 2 . pp. 275-300. ISSN 1869-8433

Fudhail, Abdul Munir and Azmi, M. I. M. and Mohamad Zin, Mohd. Rody and Salim, Mohd. Azli and Che Sidik, Nor Azwadi (2011) Application of lattice boltzmann method for lid driven cavity flow. International Review of Mechanical Engineering (IREME), 5 (5). pp. 856-861. ISSN 1970-8734

Ghadimi, Pezhman and Mohd. Yusof, Noordin and Mat Saman, Muhamad Zameri (2011) A Graphical User Interface (GUI) for assessing the sustainability level of manufacturing products: an automotive component case study. PERINTIS e-Journal, 1 . pp. 10-16. ISSN 2232-0725

Ghosh, Pradip and Mohd. Yusop, Mohd. Zamri and Ghosh, Debasish and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki (2011) Direct fabrication of aligned metal composite carbon nanofibers on copper substrate at room temperature and their field emission property. Chemical Communications, 47 (16). pp. 4820-4822. ISSN 1359-7345

Golshan, Abolfazl and Shirdar, Mostafa Rezazadeh and Sudin, Izman (2011) A comparison of optimization methods in cutting parameters using Non-Dominated Sorting Genetic Algorithm (Nsga-Ii) and Micro Genetic Algorithm (Mga). International Journal of Experimental Algorithms (IJEA), 2 (2). pp. 62-73. ISSN 2180-1282

Hamedon, Z. and Mon, T. T. and Sharif, S. and Venkatesh, V. C. and Masri, A. R. M. and Sue-Rynley, E. (2011) Performance of nitrogen gas as a coolant in machining of titanium. Advanced Materials Research, 264-26 . pp. 962-966. ISSN 1022-6680

Harandi, Shervin Eslami and Idris, Mohd. Hasbullah and Jafari, Hassan (2011) Effect of forging process on microstructure, mechanical and corrosion properties of biodegradable Mg-1Ca alloy. Materials and Design, 32 (5). pp. 2596-2603. ISSN 0264-1275

Hasagaya, M. A. A. and Jaafar, M. N. M. and Ishak, M. S. A. (2011) Investigation of oil burner combustion performance when utilizing palm biodiesel blends. International Review of Mechanical Engineering (IREME), 5 (3). pp. 548-552. ISSN 1970-8734

Hassan, Adnan (2011) An improved scheme for online recognition of control chart patterns. International Journal of Computer Aided Engineering and Technology, 3 (3-4). pp. 309-321. ISSN 1757-2657 (Print); 1757-2665 (Online)

Hossein Hosseini, S. M. and Kharaghani, A. and Kirsch, C. and Ochsner, Andreas (2011) Numerical investigation of the thermal properties of irregular foam structures. Defect and Diffusion Forum, 312-31 . pp. 941-946. ISSN 1012-0386

Hosseini, Seyed Mohammad Hossein and Öchsner, Andreas and Fiedler, Thomas (2011) Numerical investigation of the initial yield surface of perforated hollow sphere structures (phss) in a primitive cubic pattern. Finite Elements in Analysis and Design, 47 (7). pp. 804-811. ISSN 0168-874X

Imaduddin, Fitrian and Hudha, Khisbullah and Mohammad, Janatul Islah and Jamaluddin, Hishamuddin (2011) Simulation and experimental investigation on adaptive multi-order proportional-integral control for pneumatically actuated active suspension system using knowledge-based fuzzy. International Journal of Modelling, Identification and Control, 14 (1-2). pp. 73-92. ISSN 1746-6172

Ismail, Kamariah and Wan Omar, Wan Zaidi and Abdul Majid, Izaidin (2011) The commercialisation process of patents by universities. African Journal of Business Management, 5 (17). pp. 7195-7208. ISSN 1993-8233

Izman, Sudin and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohammad Nazim and Nalisa, Adila and Konneh, Mohamed (2011) Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate. Advanced Materials Research, 197-19 . pp. 219-224. ISSN 1022-6680

Izman, Sudin and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Nazim, E. M. and Low, Yik Kuan and Eng, Kean Khor (2011) Effect of pickling process on adhesion strength of Ti oxide layer on titanium alloy substrate. Advanced Materials Research, 146-14 . pp. 1621-1630. ISSN 1022-6680

Izman, Sudin and Shayganpour, A. and Idris, Mohd. Hasbullah (2011) Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design of experiments. Advanced Materials Research, 377 . pp. 422-424. ISSN 1022-6680

Jafari, Hasan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Bakhsheshi Rad, Hamid Reza and Ardestani, Seyed Sadegh Khayat and Ahmadshoar, Vali (2011) Effect of mould runner and coating on graphite nodule characteristics and hardness of thin wall ductile iron. Advanced Materials Research, 264-26 . pp. 266-271. ISSN 1022-6680

Jafari, Hasan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Farahany, Saeed (2011) Oxidation and melting characterizations of az91d granules during in-situ melting. Advanced Materials Research, 311-31 . pp. 631-634. ISSN 1022-6680

Jafari, Hassan and Idris, Mohd. Hasbullah and Ourdjini, Ali and Rahimi, Hadi and Ghobadian, Barat (2011) EIS study of corrosion behavior of metallic materials in ethanol blended gasoline containing water as a contaminant. Fuel, 90 (3). pp. 1181-1187. ISSN 0016-2361

Juang, Li Hong (2011) Two wheeled piezoelectric system. Intelligent Automation and Soft Computing, 17 (3). pp. 333-341. ISSN 1079-8587

Juang, Li Hong and Wu, Ming-Ni (2011) Psoriasis image identification using k-means clustering with morphological processing. Measurement, 44 (5). pp. 895-905. ISSN 0263-2241

Juang, Li-Hong (2011) Two-wheeled piezoelectric system. Intelligent Automation and Soft Computing, 17 (3). pp. 333-341. ISSN 1079-8587

Kamely, M. A. and Noordin, M. Y. (2011) The impact of cutting tool materials on cutting force. World Academy of Science, Engineering and Technology, 51 . pp. 903-906. ISSN 2010-376X

Karimian, M. and Ourdjini, A. and Idris, M. H. and Chuan, T. and Jafari, H. (2011) Process control of lost foam casting using slurry viscosity and dipping time. Journal of Applied Sciences, 11 (21). pp. 3655-3658. ISSN 1812-5654

Karimian, Majid and Ourdjini, Ali and Idris, Mohd. Hasbullah and Bsher, M. and Asmael, A. (2011) Effect of pouring temperature and melt treatment on microstructure of lost foam casting of al-si lm6 alloy. Advanced Materials Research, 264-26 . pp. 295-300. ISSN 1022-6680

Kassem, Hassan I. and Saqr, Khalid M. and Aly, Hossam S. and Mohd. Sies, Mohsin and Abd. Wahid, Mazlan (2011) Implementation of the eddy dissipation model of turbulent non-premixed combustion in OpenFOAM. International Communications in Heat and Mass Transfer, 38 (3). pp. 363-367. ISSN 0735-1933

Khattak, M. A. and Khan, M. A. and Tamin, M. N. (2011) Effects of thermal aging on ductile-to-brittle transition temperature behavior of welded a516 steel. Key Engineering Materials, 462-46 . pp. 1379-1384. ISSN 1013-9826

Khushairi, M. M. and Abdullah, H. and Hazran, H. (2011) A study on the optimization of control strategy of a thermal energy storage system for building air-conditioning. Procedia Engineering, 20 . pp. 118-124. ISSN 1877-7058

Koleini, Shahriar and Idris, Mohd. Hasbullah and Jafari, Hassan (2011) Influence of hot rolling parameters on microstructure and biodegradability of Mg-1Ca alloy in simulated body fluid. Materials and Design, 33 (1). pp. 20-25. ISSN 0264-1275

Koloor, S. S. R. and Abdul-Latif, A. and Tamin, Mohd. Nasir (2011) Mechanics of composite delamition under flexural loading. Key Engineering Materials, 462-46 . pp. 726-731. ISSN 1013-9826

Kuah, Chuen Tse and Wong, Kuan Yew (2011) Knowledge management performance measurement: a review. African Journal of Business Management, 5 (15). pp. 6021-6027. ISSN 1993-8233

Lad, N. and Aroussi, A. and Muhamad Said, Mohd. Farid (2011) Droplet size measurement for liquid spray using digital image analysis technique. Journal of Applied Sciences, 11 (11). pp. 1966-1972. ISSN 1812-5654

Liqi, Ang and Wong, Kuan Yew and Wai, Peng Wong (2011) Simulation of sequencing rules using witness in a milling job shop. Communications of the IBIMA, 2011 . pp. 1-6. ISSN 1943-7765

Low, Kean Ong and Wong, King Jye (2011) Influence of ball burnishing on surface quality and tribological characteristics of polymers under dry sliding conditions. Tribology International, 44 (2). pp. 144-153. ISSN 0301-679X

M. Nor, N. H. and Muhamad, N. and Ibrahim, M. H. I. and Ruzi, M. and Jamaladin, Khairur Rijal (2011) Optimization of injection molding parameter of ti-6al-4v powder mix with palm stearin and polyethylene for the highest green strength by using taguchi method. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 126-132. ISSN 1823-0334

Maimun, Adi and Priyanto, Agoes and Muhammad, A. H. and Scully, C. C. and Awal, Z. I. (2011) Manoeuvering prediction of pusher barge in deep and shallow water. Ocean Engineering, 38 (3). pp. 1291-1299. ISSN 0029-8018

Maimun, Adi and Priyanto, Agoes and Muhammad, A. H. and Scully, C. C. and Awal, Z. I. (2011) Manoeuvring prediction of pusher barge in deep and shallow water. Ocean Engineering, 38 (11-12). pp. 1291-1299. ISSN 0029-8018

Mat, Ramli and Mohamed, Mahadhir and Johari, Anwar and Ali, Asmadi (2011) Methane conversion to higher hydrocarbons over copper loaded BZSM-5 in the presence of oxygen. International Journal of Oil, Gas and Coal Technology, 4 (4). ISSN 1753-3309

Mat Darus, Intan Zaurah and Zahidi Rahman, Tuan A. and Mailah, Musa (2011) Experimental evaluation of active force vibration control of a flexible structure using smart material. International Review of Mechanical Engineering (IREME), 5 (6). pp. 1088-1094. ISSN 1970-8734

Mavalizadeh, Seyedmehdi and Ramandoust, Moones and Ochsner, Andreas (2011) Numerical investigation of the overall stiffness of carbon nanotube-based composite materials. Journal of Nano Research, 13 ( ). 047-059. ISSN 1662-5250

Middleton, Paul M. and Tang, Collin Howe Hing and Chan, Gregory S. H. and Bishop, Sarah and Savkin, Andrey V. and Lovell, Nigel H. (2011) Peripheral photoplethysmography variability analysis of sepsis patients. Medical & Biological Engineering & Computing, 49 (3). pp. 337-347. ISSN 0140-0118

Mohd Jaafar, Mohammad Nazri and Jusoff, Kamaruzaman and Osman, Mohamed Seroleh and Ishak, Mohamad Shaiful Ashrul (2011) Combustor aerodynamic using radial swirler. International Journal of Physical Sciences, 6 (13). pp. 3091-3098. ISSN 1992-1950

Mohd-Zainal, Affandi and Goodyer, Jane and Grigg, Nigel and Mohd. Rohani, Jafri (2011) Learning organization in New Zealand and Malaysian manufacturing companies. IEEE International Conference on Industrial Engineering and Engineering Management . pp. 428-432. ISSN 2157-3611

Mohd. Azmi, Mohd. Irwan and Abdul Munir, Fudhail and Che Sidik, Nor Azwadi and Goudarzi, Masoud (2011) Numerical investigation of incompressible fluid flow through porous media in a lid-driven square cavity. American Journal of Applied Sciences, 7 (10). 1341-1344. ISSN 1546-9239

Mohd. Jaafar, Mohammad Nazri and Eldrainy, Yehia A. and Asril, Muhammad Hanafi (2011) Experimental investigation of spray characteristics of refined bleached and deodorized palm oil and diesel blends using phase doppler particle alyzer. International Journal of Physical Sciences, 6 (29). pp. 6674-6680. ISSN 1992-1950

Mohd. Jaafar, Mohammad Nazri and Hussain, Ahmad Huzairi and Ishak, Mohamad Shaiful Ashrul (2011) Catalytic combustion system for use in Malaysia small gas turbine: a feasibility study. International Review of Mechanical Engineering, 5 (1). pp. 100-105. ISSN 1970-8734

Mohd. Jaafar, Mohammad Nazri and Ishak, Mohamad Shaiful Ashrul (2011) The used of aqueous urea solution in reduction of noxious emissions in bio fuel combustion system using selective non-catalytic reduction. Modern Applied Science, 5 (4). pp. 30-36. ISSN 1913-1844

Mohd. Jaafar, Mohammad Nazri and Mohd. Nor, Mohd. Khairul Firdaus and Ishak, Mohamad Shaiful Ashrull (2011) Aerodynamic study of combustor using axial swirler. International Review of Mechanical Engineering (IREME), 5 (1). pp. 92-99. ISSN 1970-8734

Mohd. Samin, Pakharuddin and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Abu Bakar, Saiful Anuar and Hudha, Khisbullah (2011) Semi-active suspention control to improve ride and handling using magnetorheological (MR) damper. International Journal Engineering Systems modeling and Simulation, 3 (3-4). ISSN 1755-9758

Mohd. Yusop, Mohd. Zamri and Ghosh, Pradip and Hayashi, Akari and Hayashi, Yasuhiko and Tanemura, Masaki and Sasase, Masato (2011) Structural change of ion-induced carbon nanofibers by electron current flow. Journal Of Vacuum Science & Technology B, 29 (4). ISSN 2166-2746

Mohd. Yusop, Mohd. Zamri and Yamaguchi, K. and Suzuki, T. and Ghosh, P. and Hayashi, A. and Hayashi, Y. and Tanemura, M. (2011) Morphology and size of ion induced carbon nanofibers: effect of ion incidence angle, sputtering rate, and temperature. Japanese Journal of Applied Physics, 50 (1(P1)). 001-006. ISSN 0021-4922

Mon, T. T. and Ramli, J. and Jeefferie, A. R. and Safian, S. and Venkatesh, V. C. (2011) Performance of cryogenic machining with nitrogen gas in machining of titanium. Applied Mechanics and Materials, 52-54 . pp. 2003-2008. ISSN 1660-9336

Motasemi, Farough and Ani, Farid Nasir (2011) The production of biodiesel from waste cooking oil using microwave irradiation. Jurnal Mekanikal, 32 . pp. 62-75. ISSN 2289-3866

Mozafari, H. and Abdi, B. and Ayob, A. (2011) Optimization of transmission conditions for thin interphases in composite materials based on colonial competitive algorithm. Key Engineering Materials, 471-47 . pp. 862-867. ISSN 1013-9826

Mozafari, H. and Ayob, A. and Alias, A. (2011) Transmission conditions between carbon fiber and epoxy matrix for thin interphases. Key Engineering Materials, 471-47 . pp. 857-861. ISSN 1013-9826

Mozafari, H. and Ayob, Amran and Alias, Amran (2011) 2D modeling of a thin interphase layer between two glass fibers-reinforced. European Journal of Scientific Research, 50 (3). pp. 340-344. ISSN 1450216X

Munir, F. A. and Sidik, N. A. C. and Ibrahim, N. I. N. (2011) Numerical simulation of natural convection in an inclined square cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Munoz-Rojas, P. A. and Carniel, T. A. and Silva, E. C. N. and Ochsner, A. (2011) Optimization of a unit periodic cell in lattice block materials aimed at thermo-mechanical applications. Advanced Structured Materials, 2 . pp. 301-345. ISSN 1869-8433

Mussa, M. A. and Abdullah, S. and Che Sidek, Nor Azwadi and Muhamad, N. (2011) Simulation of natural convection heat transfer in an enclosure by the lattice-Boltzmann method. Computers & Fluids, 44 (1). pp. 162-168. ISSN 0045-7930

Mussa, M. A. and Abdullah, S. and Nor Azwadi, C. S. and Zulkifli, R. (2011) Lattice Boltzmann simulation of cavity flows at various Reynolds numbers. International Review on Modelling and Simulations (I.Re.Mo.S), 4 (4). pp. 1909-1919. ISSN 1974-9821

Mussa, M. A. and Abdullah, Shahrir and Che Sidik, Nor Azwadi and Zulkifli, Rozli (2011) Lattice boltmann simulation of cavity flows at various reynolds number. International Journal of Thermal Sciences, 4 (4). pp. 1909-1919. ISSN 1974-9821

Mussa, Munther and Abdullah, Shahrir and Che Sidik, Nor Azwadi and Muhamad, N. (2011) Simulation of rural convection heat transfer in an enclosure by the Lattice-Boltzmann Method. Computers & Fluids, 44 . pp. 162-168. ISSN 0045-7930

Nadlene, R. and Hamzah, Esah and Norliana, S. and Mohd. Irwan, M. A. (2011) Study on the effect of volume fraction of dual phase steel to corrosion behaviour and hardness. World Academy of Science, Engineering and Technology, 50 . pp. 564-567. ISSN 2010-376X

Nasution, Henry and Jamaluddin, Hishamuddin and Mohd. Syeriff, Jamaluddin (2011) energy analysis of an air conditioning system using fuzzy logic control. Jurnal TELKOMNIKA, 9 (1). pp. 139-150. ISSN 1693-6930

Nezhadi, A. and Rahman, R. A. and Ayob, A. (2011) Transient analysis of functionally graded cylindrical shell under impulse local loads. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 757-765. ISSN 1991-8178

Noshadi, A. and Mailah, Musa (2011) Fuzzy-based active force with computed torque control of 3-RRR parallel robotic manipulator. International Review on Modelling and Simulations (I.Re.Mo.S), 4 (5). pp. 2666-2676. ISSN 1974-9821

Ochsner, Andreas and Belova, Irina Veniaminovna and Murch, Graeme Elliott (2011) A special section on new developments of nanostructured particles and materials. Journal Of Biomedical Nanotechnology, 7 (3). pp. 431-432. ISSN 1550-7033

Ochsner, Andreas and Murch, Graeme E. (2011) Heat transfer in multi-phase materials. Advanced Structured Materials, 2 . ISSN 1869-8433

Ochsner, Andreas and Veyh, C. and Belova, I. V. and Murch, G. E. and Fiedler, T. (2011) Thermal analysis of aluminium foam based on microcomputed tomography. Materialwissenschaft Und Werkstofftechnik, 42 (5). pp. 350-355. ISSN 0933-5137

Olanrewaju, Oladokun Sulaiman and Abd. Kader, Abd. Saman and Saharuddin, Abdul Hamid (2011) Utilization of simulation for training enhancement. Marine Technology and Sustainable Development: Green Innovations, 4 (2). ISSN 2155-6997

Olugu, Ezutah Udoncy and Kuan, Yew Wong (2011) Evaluation of green supply chain management practices in the Malaysian automotive industry. International Journal of Services and Operations Management, 9 (2). pp. 245-258. ISSN 1744-2370

Olugu, Ezutah Udoncy and Kuan, Yew Wong and Mohamed Shaharoun, Awaluddin (2011) Development of key performance measures for the automobile green supply chain. Resources, Conservation and Recycling, 55 (6). pp. 567-579. ISSN 0921-3449

Olugu, Ezutah Udoncy and Kuan, Yew Wong (2011) A study on the validation of green supply chain performance measures in the automotive industry. IBIMA Communications, 2011 (2011). pp. 1-14. ISSN 1943-7765

Olugu, Ezutah Udoncy and Wong, Kuan Yew (2011) Fuzzy logic evaluation of reverse logistics performance in the automotive industry. Scientific Research and Essays, 6 (7). pp. 1639-1649. ISSN 1992-2248

Ong, Low Kean and Kien, Quek K. and Wong, King Jye (2011) Effect of fibre orientation on the scratch characteristics of E-glass fibre-reinforced polyester composite. Recent Patents on Materials Science, 4 (1). pp. 56-62. ISSN 1874-4648

Osman, Hassan and Tamin, Mohd. Nasir (2011) Creep deformation characteristics of austenitic stainless steel foils. Key Engineering Materials, 462-46 . pp. 906-911. ISSN 1013-9826

Oye, N. D. and A.Iahad, N. and Ab.Rahim, N. (2011) An application of the UTAUT model for understanding acceptance and use of ICT by Nigerian University Academicians. International Journal of Information Communication Technologies and Human Development, 3 (4). pp. 1-16. ISSN 1935-5661

Prawoto, Yun and Idris, Roslinda and Kamsah, Nazri and Tamin, Nasir (2011) Three-dimensional modeling to compute plastic zone in front of crack in compact tension sample of multiphase material. Computational Materials Science, 50 . pp. 1499-1503. ISSN 0927-0256

Prawoto, Yun and Moin, A. and Tadjuddin, M. and Wan Nik, W. B. (2011) Effect of microstructures on SCC of steel: field failure analysis case study and laboratory test result. Engineering Failure Analysis, 18 (7). pp. 1858-1866. ISSN 1350-6307

Prawoto, Yunan and Idris, Roslinda and Kamsah, Nazri and Tamin, Mohd. Nasir (2011) Three-dimensional modeling to compute plastic zone in front of crack in compact tension sample of multiphase material. Computational Materials Science, 50 (4). pp. 1499-1503. ISSN 0927-0256

R., Rosliza and Sudin, Izman (2011) SEM-EDS characterization of natural products on corrosion inhibition of Al-Mg-Si alloy. Protection of Metals and Physical Chemistry of Surfaces, 47 (3). pp. 395-401. ISSN 2070-2051

Raupeeh, Noor Nadia and Mohd. Jaafar, Mohammad Nazri and Arizal, Mohd Amirul Amin and Ishak, Mohamad Shaiful Ashrul (2011) Development of gas turbine spray test rig for biofuel. International Review of Mechanical Engineering, 5 (1). pp. 106-112. ISSN 1970-8734

Reza Khoei, M. and Kashefi, M. and Ghadimi, P. and Azadnia, A. H. and Abdul Rani, M. R. and Lalmazloumian, M. (2011) Order processing in supply chain management with developing an information system model: an automotive manufacturing case study. Communications in Computer and Information Science, 254 (PART 4). pp. 65-76. ISSN 1865-0929

Romagnoli, A. and Martinez-Botas, R. F. and Rajoo, Srithar (2011) Steady state performance evaluation of variable geometry twin-entry turbine. International Journal of Heat and Fluid Flow, 32 (2). pp. 477-489. ISSN 0142-727X

Rosliza, R. and Wan Nik, W. B. and Izman, Sudin (2011) Efficiency comparison of some rural products on corrosion inhibition of al-mg-si alloy. Advanced Materials Research, 328-30 . pp. 1206-1209. ISSN 1022-6680

Sabzehmeidani, Y. and Hussein, M. and Mailah, Musa and Mohd. Zain, Mohd. Zarhamdy and Abdullah, M. R. (2011) Intelligent hybrid control of piezoelectric actuated micro robot. International Journal of Systems Applications, Engineering & Development, 3 (5). pp. 306-313. ISSN 2074-1308

Sabzehmeidani, Yaser and Mailah, Musa and Hussein, Mohamed (2011) Modelling and control of a piezo actuated micro robot with active force control capability for in-pipe application. International Journal of Modelling, Identification and Control, 13 (4). pp. 301-309. ISSN 1746-6172

Sadir, Sahba and Abdul Kadir, Mohammed Rafiq and Ochsner, Andreas and Harun, Muhamad Noor (2011) Modeling of bio scaffolds: structural and fluid transport characterization. World Academy of Science, Engineering and Technology, 55 . pp. 1091-1096. ISSN 2010-376X

Samion, Syahrullail and Bahak, Mohd. Zubil and Che Sidek, Nor Azwadi and Mohd. Jamir, Mohd. Ridzuan (2011) Experimental evaluation of palm oil as lubricant in cold forward extrusion process. International Journal of Mechanical Sciences, 53 (7). pp. 549-555. ISSN 0020-7403

Sani, Sulaman O. and Abd. Kader, Sani Abd. Saman and Sama, N. W. and A., Azlan A. (2011) Numerical modeling for marine mobile floating berthing protection facilities. International Journal of Mechanical & Mechatronics Engineering, 11 (6). pp. 23-32. ISSN 2077-124X

Saqr, Khalid M. and Aly, Hossam S. and Sies, Mohsin M. and Wahid, Mazlan A. (2011) Computational and experimental investigations of turbulent asymmetric vortex flames. International Communications in Heat and Mass Transfer, 38 (3). pp. 353-362. ISSN 0735-1933

Saqr, Khalid M. and Musa, Md. Nor (2011) A perspective of the Malaysian highway energy consumption and future power supply. Energy Policy, 39 (6). pp. 3873-3877. ISSN 0301-4215

Saw, Chun Lin and Choong, Chee Guan and Abu Bakar, Abd. Rahim and Jamaluddin, Mohd. Rahimi and Wan Harujan, Wan Mohd. Musyris and Abd. Ghani, Badri (2011) Disc brake squeal suppression through chamfered and slotted pad. International Journal of Vehicle Structures & Systems, 3 (1). pp. 28-35. ISSN 0975-3060

Shaffiar, N. M. and Lai, Z. B. and Tamin, Mohd. Nasir (2011) Damage mechanics model for solder/intermetallic interface fracture process in solder joint. Key Engineering Materials, 462-46 . pp. 1409-1414. ISSN 1013-9826

Shaffiar, N. M. and Lai, Z. B. and Tamin, Mohd. Nasir (2011) Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-46 . pp. 1409-1414. ISSN 1662-9795

Shayfull, Z. and Fathullah, M. and Sharif, S. and Sir, S. M. and Shuaib, N. A. (2011) Warpage analysis on ultra-thin shell by using Taguchi Method and analysis of variance (ANOVA) for three-plate mold. International Review of Mechanical Engineering (IREME), 5 (6). pp. 1116-1124. ISSN 1970-8734

Shirdar, Mostafa Rezazadeh and Nilashi, Mehrbakhsh and Bagherifard, Karamollah and Ibrahim, Othman and Izman, S. and Moradifard, Hossein and Janahmadi, Nasim and Barisamy, Mehdi (2011) Application of ANFIS system in prediction of machining parameters. Journal of Theoretical and Applied Information Technology, 33 (1). pp. 83-93. ISSN 1992-8645

Shukur, Z. (2011) Upgrading of pyrolysis oil into diesel-like fuel oil: comparison between in-situ and ex-situ test rig. Jurnal Teknologi, 56 . pp. 101-113. ISSN 0127–9696

Sidik, N. A. C. and Goudarzi, M. and Witri, M. A. (2011) Prediction of the dynamics of droplet on solid surface using Lattice Boltzmann Method. International Review of Mechanical Engineering (IREME), 5 (7). pp. 1241-1245. ISSN 1970-8734

Sidik, N. A. C. and Loon, K. W. (2011) Prediction of supersonic flow over compression corner. Journal of Applied Sciences, 11 (19). pp. 3397-3404. ISSN 1812-5654

Silva, L. F. M. and Öchsner, Andreas (2011) Guest editorial. International Journal of Adhesion and Adhesives, 31 (5). pp. 271-272. ISSN 0143-7496

Sulaiman, O. and Abd. Kader, Abd. Saman and Saharuddin, A. H. (2011) Collision aversion model for inland water transportation : cost benefit analysis model. International Journal of Trade, Economics and Finance, 2 (1). pp. 24-31. ISSN 2010-023X

Sulaiman, O. and Saharuddin, A. H. and Wan Nik, W. B. and Ahmad, M. F. and Abd. Kader, Abd. Saman (2011) Techno economic study of potential using solar energy as a supporting power supply for diesel engine for landing craft. International Journal of Business and Social Science, 2 (1). pp. 113-119. ISSN 2219-1933

Sulaiman, O. O. and Abd. Kader, Ab. Saman and Saharuddin, A. H. and Abdul Malik, Adi Maimun (2011) Predictive and reliability based collision risk aversion model for inland waterways: the case frequency estimation for Malaysian Langat River. Jurnal Mekanikal (32). pp. 38-60. ISSN 0127-3396

Sulaiman, O. O. and Abd. Kader, Abd. Saman and Saharuddin, A. H. and Wan Nik, W. B. and Samo, K. B. (2011) Review on potential for waste recycled based bioenergy for marine system. International Jurnal Environment Technology and Management, 14 (1-4). pp. 339-357. ISSN 1466-2132

Sulaiman, O. O. and Saharuddin, A .H. and Abd. Kader, Abd. Saman and Laily, A. R. N. (2011) Safety and environment risk and reliability model for inland waterway collision accident frequency. International Journal of Energy and Environment, 4 (5). pp. 461-477. ISSN 2076-2909

Sulaiman, O. O. and Saharuddin, A. H. and Abd. Kader, Abd. Saman (2011) Review of potential of inland waterway hybrid transportation for sustainable transportation capability building Terengganu. Canadian Journal on Environmental, Construction and Civil Engineering, 2 (5). pp. 73-83. ISSN 1923-1636

Syahrullail, Samion and Nor Azwadi, Che Sidek and Tiong, Chiong Ing (2011) The metal flow evaluation of billet extruded with RBD palm stearin. International Review of Mechanical Engineering, 5 (1). pp. 21-27. ISSN 1970-8734

Syahrullail, Samion and Nor Azwadi, Che Sidik and Abdul Kadir, Mohammed Rafiq and Shafie, N. E. A. (2011) The effect of tool surface roughness in cold work extrusion. Journal of Applied Sciences, 11 (2). pp. 367-372. ISSN 1812-5654

Tavakolpour, A. and Mailah, M. and Mat Darus, I. Z. (2011) Modeling and simulation of a novel active vibration control system for flexible structures. WSEAS Transactions on Systems and Control, 6 (5). pp. 184-195. ISSN 1991-8763

Ubaidillah, Ubaidillah and Hudha, Khisbullah and Jamaluddin, Hishamuddin (2011) Simulation and experimental evaluation on a skyhook policy-based fuzzy logic control for semi-active suspension system. International Journal Structural Engineering, 2 (3). pp. 243-272. ISSN 1758-7328

Varatharajoo, Renuganth and Choo, Tech Wooi and Mailah, Musa (2011) Attitude pointing enhancement for combined energy and attitude control system. Acta Astronautica, 68 (11-12). pp. 2025-2028. ISSN 0094-5765

Varatharajoo, Renuganth and Choo, Tech Wooi and Mailah, Musa (2011) Two degree-of-freedom spacecraft attitude controller. Advances in Space Research, 47 (4). pp. 685-689. ISSN 0273-1177

Winkler, R. and Pannert, W. and Merkel, M. and Ochsner, Andreas (2011) Structure borne sound in metallic hollow sphere structures. Materialwissenschaft UND Werkstofftechnik, 42 (5). pp. 365-369. ISSN 0933-5137

Wong, Kuan Yew and Komarudin, Komarudin (2011) Comparison of techniques for dealing with empty spaces in unequal area facility layout problems. International Journal of Industrial and Systems Engineering, 6 (3). 289 - 300. ISSN 1748-5037

Wong, W. P. and Wong, K. Y. (2011) Supply chain management, knowledge management capability, and their linkages towards firm performance. Business Process Management Journal, 17 (6). pp. 940-964. ISSN 1463-7154

Yahya, Mohd. Yazid and Cantwell, W. J. and Langdon, G. S. and Nurick, G. N. (2011) The blast resistance of a woven carbon fiber-reinforced epoxy composite. Journal of Composite Materials, 45 (7). pp. 789-801. ISSN 0021-9983

Yousefi, M. and Darus, A. N. and Mohammadi, H. (2011) Second law based optimization of a plate fin heat exchanger using imperialist competitive algorithm. International Journal of Physical Sciences, 6 (20). pp. 4749-4759. ISSN 1992-1950

Yu, Cheng Wong and Kuan, Yew Wong (2011) Approaches and practices of lean manufacturing: the case of electrical and electronics companies. African Journal Of Business Management, 5 (6). pp. 2164-2174. ISSN 1993-8233

Zakaria, N. and Ani, Farid Nasir and Yunus, M. N. M. and Husain, M. A. S. (2011) Oxidative pyrolysis of examination rubber gloves in the integral pyrolysis test plant. International Journal of Mechanical and Materials Engineering, 6 (1). pp. 1-9. ISSN 1823-0334

Zolfagharian, A. and Zain, M. Z. M. and AbuBakar, A. R. and Hussein, M. (2011) Particle swarm optimization approach on flexible structure at wiper blade system. World Academy of Science, Engineering and Technology, 78 . pp. 97-102. ISSN 2010-376X

Book Section

A. Rasid, Zainudin and Ayob, Amran and Zahari, Rizal and Majid, D. L. and Rafie, A.S. M. (2011) Thermal post-buckling improvements of laminated composite plates using the active strain energy tuning approach. In: Advanced Materials Research. Scientific.net, Guangzhou, pp. 2235-2238. ISBN 978-303785214-9

A. Rasid, Zainudin and Ayob, Amran and Zahari, Rizal and Mustapha, F. and Majid, D. L. and Varatharajoo, Renuganth (2011) Thermal buckling and post-buckling improvements of laminated composite plates using finite element method. In: Key Engineering Materials. Scientific.net, Kuala Lumpur, pp. 536-541. ISBN 978-303785059-6

Abd. Rahman, M. N. and Abdul Rani, Mat Rebi and Mohd. Rohani, Jafri (2011) Investigation of the physical risk factor in wall plastering job using WERA method. In: IMECS 2011 - International MultiConference of Engineers and Computer Scientists 2011. Newswood Limited, Hong Kong, pp. 1302-1304. ISBN 978-988192512-1

Abdul Hamid, Mohd. Foad and Idrus, Arazi and Potty, Narayanan Sambu and Cossa, Nelson J. and Nizamani, Zafarullah (2011) Resistance parameters statistics for jacket platforms in offshore Malaysia. In: Proceedings of the International Offshore and Polar Engineering Conference. Elsevier, Maui, Hawaii,, pp. 226-232. ISBN 978-1-880653-96-8

Abdul Hamid, Mohd. Kameil and Stachowiak, G. W. (2011) The effects of grit particle size on frictional characteristics of automotive braking system. In: Advanced Materials Research. Scientific.net, pp. 3511-3516. ISBN 978-303785031-2

Abdulrahman, A. S. and Ismail, M. and Hussain, Mohammad Sakhawat (2011) Inhibiting sulphate attack on concrete by hydrophobic green plant extract. In: Advanced Building Materials. Trans Tech Publications, Switzerland, pp. 3837-3843. ISBN 978-303785127-2

Ahmad, Robiah and Hashim, M. H. (2011) Development of energy harvesting device using piezoelectric material. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE, pp. 1-6. ISBN 978-145770005-7

Ayob, Amran and Alias, Amran and Mozafari, H. (2011) Transmission conditions between carbon fiber and epoxy matrix for thin interphases. In: Key Engineering Materials. Scientific.Net, Kuala Lumpur, pp. 857-861. ISBN 978-303785059-6

Farahany, Saeed and Khafri, M. Aghaie and Ourdjini, Ali and Idris, Mohd. Hasbullah (2011) Influence of heat treatment on properties of hot isostatically pressed turbine blade superalloy IN738. In: Advances in Materials and Processing Technologies II. Trans Tech Publications, Switzerland, pp. 502-507. ISBN 978-303785053-4

Fiedler, Thomas and Belova, Irina and Ochsner, Andreas and Murch, Graeme E. (2011) Lattice Monte Carlo analysis of thermal diffusion in multi-phase materials. In: Heat Transfer in Multi-Phase Materials. Springer, New York, pp. 275-300. ISBN 978-3-642-04402-1

Hamedon, Z. and Mon, T. T. and Sharif, Safian and Venkatesh, V. C. and Masri, A. R. M. and Sue-Rynley, E. (2011) Performance of nitrogen gas as a coolant in machining of titanium. In: Advances in Materials and Processing Technologies II. Advanced Materials Research, 264-26 . Trans Tech Publications, Switzerland, pp. 962-966. ISBN 978-303785053-4

K., Hudha and Harun, M. Hafiz and Harun M. H., Mohd. Hanif and Jamaluddin, Hishamuddin (2011) Lateral suspension control of railway vehicle using semi-active magnetorheological damper. In: 2011 IEEE Intelligent Vehicles Symposium (IV). IEEE, pp. 728-733. ISBN 978-145770890-9

Kadir, Z. A. and Hudha, K. and Jamaluddin, Hishamuddin and Ahmad, F. and Imaduddin, F. (2011) Active roll control suspension system for improving dynamics performance of passenger vehicle. In: Proceedings of 2011 International Conference on Modelling, Identification and Control, ICMIC 2011. IEEE Explorer, pp. 492-497. ISBN 978-095671570-8

Karimian, M. and Ourdjini, Ali and Idris, Mohd. Hasbullah and Asmael, M. B. A. (2011) Effect of pouring temperature and melt treatment on microstructure of lost foam casting of AL-Si LM6 alloy. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 295-300. ISBN 978-303785053-4

Khattak, M. A. and Khan, M. A. and Tamin, Mohd. Nasir (2011) Effects of thermal aging on ductile-to-brittle transition temperature behavior of welded A516 steel. In: Key Engineering Materials. Trans Tech Publications, Germany, pp. 1379-1384. ISBN 978-087849210-7

Mailah, Musa and Mohd. Nor, Nur Safwati (2011) Vibration suppression of hard disk drive mechanism using intelligent active force control. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11 - Conference Proceedings. IEEE Explorer, Kuala Lumpur. ISBN 978-1-61284-437-4

Mat Darus, Intah Zuhrah (2011) Parametric identification and active vibration control of a flexible plate system. In: Recent Trends In Systems And Control. Penerbit UTM , Johor, pp. 135-148. ISBN 978-983-52-0545-3

Mohd. Jaafar, Mohammad Nazri and Kaviri, A. G. (2011) Thermodynamic modeling and exergy optimization of a gas turbine power plant. In: 2011 IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011. IEEE, Xi'an, pp. 366-370. ISBN 978-161284485-5

Mon, T. T. and Ramli, J. and Jeefferie, A. R. and Sharif, Safian and Venkatesh, V. C. (2011) Performance of cryogenic machining with nitrogen gas in machining of titanium. In: Advances in Mechanical Engineering. Applied Mechanics and Materials, 52-54 . trans Tech Publications, Switzerland, pp. 2003-2008. ISBN 978-303785077-0

Mozafari, H. and Abdi, B. and Ayob, Amran (2011) Optimization of transmission conditions for thin interphases in composite materials based on colonial competitive algorithm. In: Composite Science and Technology. Key Engineering Materials, 471 - . Trans Tech Publications, Switzerland, pp. 862-867. ISBN 978-303785059-6

Munoz-Rojas, Pablo A. and Carniel, Thiago A. and Silva, Emilio C. N. and Ochsner, Andreas (2011) Optmization of a unit periodic cell in lattice block materials aimed at thermo-mechanical applications. In: Heat Transfer in Multi-Phase Materials. Springer, New York, pp. 301-345. ISBN 978-3-642-04402-1

Ochsner, Andreas (2011) Special numerical techniques to joint design. In: Handbook of Adhesion Technology. Springer, New York, pp. 661-668. ISBN 978-3-642-01168-9

Osman, H. and Tamin, Mohd. Nasir (2011) Creep deformation characteristics of austenitic stainless steel foils. In: Key Engineering Materials. Trans Tech Publications, Switzerland, 906 -911. ISBN 978-087849210-7

Osman, Kahar and Md. Sheriff, Jamaluddin and Cupu, D. R. P. (2011) Numerical analysis of line contact elastohydrodynamic lubrication with biobased oils. In: 2011 Fifth Asia Modelling Symposium. IEEE Xplore, Red Hook, NY, pp. 127-132. ISBN 978-1-4577-0193-1

Rahman , T. A. Z. and Mat Darus, Intan Zaurah (2011) Active vibration control of a flexible plate via active force control strategy. In: 2011 4th International Conference on Mechatronics: Integrated Engineering for Industrial and Societal Development, ICOM'11 - Conference Proceedings. IEEE Explorer, 001-006. ISBN 978-1-61284-435-0

Rosliza, R. and Wan Nik, W. B. and Sudin, Izman (2011) Efficiency comparison of some natural products on corrosion inhibition of Al-Mg-Si alloy. In: Advanced Materials Research. Trans Tech Publications, Germany, pp. 1206-1209. ISBN 978-303785238-5

Saad, M. S. and Jamaluddin, Hishamuddin and M. Darus, I. Z. (2011) Active vibration control of flexible beam system using proportional control scheme in finite difference simulation platform. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, 001-005. ISBN 978-145770005-7

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, M. and Engku Abu Bakar, Engku Mohammad Nazim and Kuan, L. Y. and Khor, E. K. (2011) Effect of pickling process on adhesion strength of Ti oxide layer on titanium alloy substrate. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 1621-1630. ISBN 978-087849200-8

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, M. and Engku Abu Bakar, Engku Mohammad Nazim and Nalisa, A. and Konneh, M. (2011) Effect of carburization process on adhesion strength of Ti carbide layer on titanium alloy substrate. In: Advanced Materials Research. Trans Tech Publications, Switzerland, pp. 219-224. ISBN 978-303785035-0

Sudin, Izman and Shayganpour , A. and Idris, Mohd. Hasbullah (2011) Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design of experiments. In: Advanced Materials Research. Trans Tech Publications, pp. 422-425. ISBN 978-303785247-7

Wong, Kuan Yew and Mirzapourrezaei, S. A. and Lalmazloumian, M. and Dargi, A. (2011) Simulation of a manufacturing assembly line based on WITNESS. In: 2011 Third International Conference on Computational Intelligence, Communication Systems and Networks (CICSyN). IEEE, Bali, pp. 132-137. ISBN 978-076954482-3

Zakaria, M. Z. and Jamaluddin, Hishamuddin and Ahmad, Robiah and Muhaimin, Abdul Halim (2011) Effects of genetic algorithm parameters on multiobjective optimization algorithm applied to system identification problem. In: 2011 4th International Conference on Modeling, Simulation and Applied Optimization, ICMSAO 2011. IEEE Explorer, USA, 001-005. ISBN 978-145770005-7

Conference or Workshop Item

A. Kadir, Khairuldean and Chiong, T. Ing and Supriyo, Bambang and Tawi, Kamarul Baharin and Samion, Syahrullail (2011) Comparison between mineral oil and palm olein in wear resistant. In: Asean Conference On Scientific And Social Science Research 2011.

Aahar, A. A. and Darus, Amer Nordin and Nasution, Henry and Sulaimon, Shodiya (2011) New empirical correlations for sizing adiabatic capillary tubes in refrigeration systems. In: The 4th International Meeting Of Advances In Thermofluids.

Aarabi, Majid and Mat Saman, Muhamad Zameri and Khoei, M. R. and Kuan, Yew Wong and Beheshti, Hooshang M. and Zakuan, Norhayati (2011) Conceptual model for information systems of sustainable supply chain management. In: Proceedings Of The 2011 IEEE Ieem.

Aarabi, Majid and Mat Saman, Muhamad Zameri and Khoei, M. R. and Kuan, Yew Wong and Beheshti, Hooshang M. and Zakuan, Norhayati (2011) Information systems of sustainable supply chain management for small and medium sized enterprises. In: The Proceeding Of The First Iranian Students Scientific Conference In Malaysia.

Aarabi, Majid and Mat Saman, Muhamad Zameri and Kuan, Yew Wong (2011) Modeling of demand forecasting information systems. In: National Science Postgraduate Conference.

Aarabi, Majid and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Beheshti, Hooshang M. and Hemdi, Abdul Rahman (2011) The effect of enterprise architecture for enterprise resource planning in small and medium enterprises: a review and research direction. In: Proceedings Of Industrial Engineering And Service Science.

Aarabi, Majid and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Beheshti, Hooshang M. and Zakuan, Norhayati (2011) Critical success factors of enterprise resource planning implementation in small and medium-sized enterprises in developing countries: a review and research direction. In: Proceedings Of Industrial Engineering And Service Science.

Abd. Kader, Ab. Saman and Ahmad, Mohd. Zamani (2011) Algorithm for container terminal expansion by marginal approach. In: The 16th International Conference of Hong Kong Society for Transportation Studies, 17-20 December 2011, InterContinental Grand Stanford, Hong Kong.

Abdi, Behzad and Mozafari, Hamid and Ayob, Amran and Abdullah, Mohamed Rusian (2011) Multi-objective design of fibre- metal laminates for maximum impact resistance using imperialist competitive algorithm and genetic algorithm. In: 2nd World Conference On Information Technology.

Abdul Aziz, Azhar and Abdul Latiff, Zulkarnian (2011) Comparative evaluation of palm oil derived fuels with a reference fuel using single cylinder direct injection diesel engine. In: Proceedings Of The 12Th International Conference On Qir (Quality In Research).

Abdul Hamid, M. K. and Stachowiak, G. W. and Syahrullail, S. (2011) Effects of hard particles on friction coefficients and particle embedment in brake system during hard braking. In: The 4th International Meeting Of Advances In Thermofluids.

Abdul Hamid, Mohd. Kameil (2011) Effects of hard particles on friction coefficient and particles embedment. In: Interational Meeting Of Advances In Thermofluids 4th Imat.

Abdul Malik, Adi Maimun (2011) Keynote speech : ensuring safer offshore deepwater solution simulation and experiment. In: Marstec (Marine Science & Technology Centre 2011).

Abdul Wahid, Mazlan and Mohd Sies, Mohsin and Tuan kamaruddin, Tengku Nordayana Akma (2011) Review of homogeneous charge compression ignition (HCCI) combustion engines and exhaust gas recirculation (EGR) effects on HCCI. In: The 4th International Meeting Of Advances In Thermofluids.

Abdullah, Mohamed Ruslan (2011) Development od novel polymer composite beam applying for acetabular cup prosthesis. In: 8th International Conference On Composite On Composite Science And Technology (ICCST 8).

Abdullah, Mohamed Ruslan (2011) Effect of coupling agent on mechanical and biological properties of polyetheretherketone/hydroxyapatite bioactive composite for prosthetic medical device. In: 8th International Conference On Composite On Composite Science And Technology (ICCST 8).

Abu Bakar, Saiful Anuar and Masuda, Ryosuke and Hashimoto, Hiromu and Inaba, Takeshi and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Mohd. Samin, Pakharuddin (2011) Ride and handling performance improvement of electric vehicle conversion using active suspension system. In: International Conference On Modeling And Simulation Technology.

Adnan, Faizul Amri (2011) The effect of environmental factors and vessel parametres on ship generated. In: Marstec (Marine Science & Technology Centre 2011).

Agoes Priyanto (2011) Static stability margin criteria trimaran wig during take-off. In: The 2011 International Conference On Advances In Structural Engineering And Mechanics.

Ahmad Faiz, M. Z. and A. Wahid, Mazlan and M. Saqr, Khalid (2011) Direct thrust force measurement of pulse detonation engine. In: The 4th International Meeting Of Advances In Thermofluids.

Ali Ourdjini (2011) Study on the microstucture and mechanical properties of double poured work roll. In: Asean Conference On Scientific And Social Science Research (ACSSSR 2011).

Amrina, Elita and Mohd. Yusof, Sha'ri (2011) A proposed sustainable manufacturing performance measures for automotive companies. In: 12th Asia Pacific Industrial Engineering And Management Systems Conference (APIEMS 2011).

Ani, Farid Nasir (2011) Heating characteristic of biomass and carbonaceous materials under microwave radiation. In: 1st Clean Energy And Technology (CET 2011).

Anwar, Mahmood and Mohd. Ghazali, Normah and H.M.A. Settar, Nurudin (2011) Thermoacoustic cooling with no refrigerant. In: The 12Th International Conference On Qir (Quality In Research) 2011.

Arib Rejab, M. N. and Roslan, A. R. and Raja Hamzah, R. I. and Nazirah, A. and Asyraf, I. (2011) An analytical method to determine natural frequency of powertrain mounting system. In: 14th Asia Pacific Vibration Conference (APVC 2011).

As' Arry, Azizan and Cheraghizanjani, Alireza and Md. Zain, Mohd. Zarhamdy and Hussein, Mohamed and Mohd. Yusop, Zulkifli (2011) Development of measurement device and classification for tremor patients behaviour. In: Recent Research In Computational Techniques, Non-Linear Systems And Control.

Azadnia, Amir Hossein and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Andewari, Amin mahmoudzadeh (2011) A general framework of a reference information system model for e-flexible supply chains in small and medium enterprises. In: The Proceeding Of The First Iranian Students Scientific Conference In Malaysia.

Azadnia, Amir Hossein and Mat Saman, Muhamad Zameri and Kuan, Yew Wong and Hemdi, Abdul Rahman (2011) Integration model of fuzzy c means clustering algorithm and topsis method for customer lifetime value assessment. In: Proceedings Of The 2011 IEEE Ieem.

Azizan As' Arry (2011) Study of active force control in biodynamic hand model. In: Recent Advances In Computers, Communications, Applied Social Science And Mathematics.

Behrouzi, Farzad and Wong, Kuan Yew (2011) A study on lean supply chain performance measure of smes in the automotive industry. In: The IEEE International Conference On Industrial Engineering And Engineering Management.

Che Sidik, Nor Azwadi (2011) Computational analysis of particulate flow in expansion chanel. In: Wseas International Conferences.

Che Sidik, Nor Azwadi (2011) Computational simulation of flow in stenotic artery using cubic interpolation profile scheme. In: International Meeting Of Advances In Thermofluids (4th Imat 2011).

Che Sidik, Nor Azwadi (2011) Numerical prediction of dynamics of solid particle in lid-driven cavity flow. In: International Meeting Of Advances In Thermofluids (4th Imat 2011).

Che Sidik, Nor Azwadi (2011) Numerical simulation of flow over semicircular cavity. In: Wseas International Conferences.

Chuen, Tse Kuah and Wong, Kuan Yew (2011) A review of data envelopment analysis models for handling data variations. In: The IEEE International Conference On Industrial Engineering And Engineering Management.

Costall, Aaron and Romagnoli, Alessandro and Copeland, Colin and Seiler, Martin and Martinez-Botas, Ricardo and Rajoo, Srithar (2011) Comparison between the steady performance of double-entry and twin-entry turbocharger turbine. In: Asme Turbo Expo 2011.

Dadan Ramdan (2011) Shear mechanisme during crygenic crygenic treatment of ti6a14v. In: 12th International Conference On Qir (Quality In Research).

Dargi, Ahmad and Lalmazloumian, Morteza and Mirzapourrezaei, Seyed Ali and Kuan, Yew Wong (2011) Simulation of a manufacturing assembly line based on witness. In: 2011 Third International Conference On Computational Intelligence, Communication Systems And Networks.

Darus, Amer Nurdin (2011) New empirical correlation for sizing adiabatic capillary tubes in refrigeration system. In: International Meeting Of Advances In Thermofluids (4th Imat 2011).

Daud, Mohd. Fadzil and Mohd. Taib, Jamaluddin and Shariffudin, Rio Sumarni (2011) Development and validation of an essential three dimensional computer aided design conceptual knowledge (3d-cad-ck) questionnaire. In: Proceedings Of The Ietec'11 Conference.

Fawwaz, W. N. and Kameil, A. H. M. and Syahrullail, S. and Wira, J. Y. (2011) Wear characteristic of RBD palm olein using four-ball tribotester. In: The 4th International Meeting Of Advances In Thermofluids.

Gohari, Mohammad and Abd. Rahman, Roslan and Ishak, Raja (2011) New biodynamical model of human body responses to vibration based on artificial neural network. In: 14th Asia Pacific Vibration Conference (APVC 2011).

Gohari, Mohammad and Abd. Rahman, Roslan and Tahmasebi, Mona (2011) Determining and optimization of vehicle seat suspension via artificial neural network modeling of coupled human-seat model. In: United Kingdom - Malaysia - Ireland Engineering Science Conference 2011 (Umies 2011).

Golshan, Abolfazl and Ayob, Amran and Gohari, Soheil (2011) Theoretical Analysis and Finite Element Simulation of Behavior of Laminated Hemispherical GRP Dome Subjected to Internal Pressure. In: International Conference On Computer And Software Modeling.

Golshokouh, Iman and Ani, Farid Nasir and Syahrullail, S. (2011) Wear resistance evaluation of palm fatty acid distillate using four-ball triboster. In: The 4th International Meeting Of Advances In Thermofluids.

Harsej, Fatemeh and Nikookar, Iraj and Mohd. Yusof, Sha'ri (2011) Total productive maintenance : a conceptual framework for manufacturing performance. In: 12th Asia Pacific Industrial Engineering And Management Systems Conference (APIEMS 2011).

Harun, Muhamad Noor (2011) Modeling of bio scaffolds : structural & fluid transport charactrization. In: International Conference On Bioengineering And Bionanotechnology (ICBB 2011).

Hussain, Mohammad Sakhawat (2011) Direct electrodeposition of nano-crystalline ni on ti. In: IMFAIR 2011.

Idris, Hasbullah (2011) Characteristic of as cast and forged biodegradable MG-CA binary alloy immersed in kokubo body fluid. In: 14th International Conference On Advanced In Materials And Processing Technologies (AMPT 2011).

Idris, Mohd. Hasbullah (2011) Doe applied to study the effect of process parametres on silicon spacing in lost foam al-si-cu alloy casting. In: 1St International Conference On Mechanical Engineering Research (ICMER 2011).

Idris, Mohd. Hasbullah (2011) Effect of pouring temperature and slurry viscosity on heat transfer roughness in lost foam casting. In: 4th Imat 2011 International Meeting On Advances In Thermofluids (IMAT).

Idris, Mohd. Hasbullah (2011) Effect of pressure on structure and properties of lost foam casting of al-11-si cast alloy. In: International Conference On Mechanical, Industrial And Manufacturing Technology (MIMT 2011).

Idrus, Arazi B. and Potty, Narayanan Sambu and Abdul Hamid, Mohd. Foad and Cossa, Nelson J. and Nizamani, Zafarullah (2011) Resistance parameters statistics for jacket platforms in offshore Malaysia. In: Proceedings Of The Twenty-First (2011) International Offshore And Polar Engineering Conference.

Jamei, Saeed and Maimun, Adi and Mansor, Shuhaimi and Priyanto, Agoes and Nor Azwadi, Nor Azwadi and Jaswar, Jaswar (2011) Optimizing compound wing configuration of a wing in ground effect craft. In: ICMCFD.

Jaswar, Jaswar and Maimun, A. and Mazlan, Mazlan and Priyanto, A. and Zamani, Zamani and Pauzi, Pauzi and Saman, Saman (2011) Effect of stern hull shape on turning circle of ships. In: The 4th International Meeting Of Advances In Thermofluids.

Jaswar, Jaswar and Maimun, A. and Priyanto, A. and Mazlan, Mazlan and Zamani, Zamani and Saman, Saman and Pauzi, Pauzi (2011) An integrated CFD simulation tool in NAO engineering, FME-UTM. In: The 4th International Meeting Of Advances In Thermofluids.

K. M. F., Chee and Hamzah, Esah and Yong, T. M. (2011) Effect of Substrate Material on the Deposition of Polycrystalline Diamond: an XRD analysis. In: 3rd Regional Materials Technology Conference.

Kamsah, Nazri and Mamat, Rizalman and Mon, Thet T. (2011) Thermal analysis of si-engine using simplified finite element model. In: Proceedings Of The World Congress On Engineering.

Lau, K. Y. and S., Mohd.Yusoff and Mohd. Ghazali, Normah (2011) Thermal analysis of Malaysian double storey housing- low/medium cost unit. In: The 4th International Meeting Of Advances In Thermofluids.

Liqi Ang (2011) Simulation of sequencing rules in a five-similar-machine job shop. In: Innovation And Knowledge Management: A Global Competitive Advantage.

M. L., Tholudin (2011) The comparison of various gas turbine inlet aircooling methods for various ambient condition trough energy and exergy analysis. In: The 4th International Meeting of Advances in Thermofluids, 3-4 October 2011, Melaka, Malaysia.

M. L., Thouludin (2011) Exergy analysis of a cogeneration heat and power (CHP) system (first and second law analysis). In: 2011 IEEE Conference on Clean Energy and Technology (CET), 27-29 June 2011, Kuala Lumpur, Malaysia.

M. S. Chiong (2011) Single entry mixed flow turbine performance prediction with 1-d gas dynamic code coupled with mean line model. In: International Gas Turbine Congress 2011 (Igtc).

M. Saqr, Khalid and Wahid, Mazlan A. and Sies, Mohsin M. (2011) Highly-resolved large eddy simulation of the nonreacting flow in an asymmetric vortex combustor. In: The 4th International Meeting Of Advances In Thermofluids.

Mailah, Musa and Mohd. Nor, Nur Sarwati (2011) Vibration suppression of hard disk drive mechanism using intelligent active force control. In: 4th International Conference On Mechatronics (ICOM).

Maimun, Adi (2011) Numerical investigation on performance and environmental impact of a compound wing in ground effect. In: 2nd International Conference On Fluid Mechanics And Heat & Mass Transfer 2011.

Mansor, S. and Wan Omar, W. Z. and Ishak, I. S. and Rahman, A. B. and Mat Lazim, T. (2011) Experimental wind tunnel tests on a semi submersible-FPS platform. In: 47th Conference On Subsonic Aerodynamic Testing Association.

Mat Yazid, Muhamad Azizi (2011) Recent developments in advanced electron microscopy and nanofabrication. In: 24th Malaysian Symposium Of Analytical Sciences (SKAM™- 24).

Md. Sheriff, Jamaluddin (2011) Effect of semi-circular mavy liner on perfomance of journal bearing. In: International Meeting Of Advances In Thermofluids (4th Imat 2011).

Md. Zain, Mohd Zarhamdy and Abu Bakar, Abd. Rahim (2011) Particle swarm optimization approach on flexible structure at wiper blade system. In: World Academy of Science, Engineering and Technology, 14-16 November 2011, Paris, France.

Mirbirjandian, Ehsan and Wong, Kuan Yew (2011) A Simulation Study On Kanban Control Systems. In: 17th International Business Information Management Association (IBIMA) Conference.

Mohd. Noor, Alias (2011) Management of rivers for environmental friendly inland waterway transport system. In: 2nd Annual Marinetech Summit 2011 (MTS 2011).

Musa, Md. Nor and Osman, Kahar and A. Hamat, Ab. Malik (2011) Renewable energy from induced airflow generated by cruising ground vehicles in tandem using rans. In: International Conference On Agricultural And Environmental Engineering (ICAEE) 2011.

Musa, Md. Nor and Osman, Kahar and Hamat, Ab. Malik A. (2011) Computational analysis of flow field around Ahmed Model car passing through under flyover. In: The 4th International Meeting Of Advances In Thermofluids.

N. T., Putri and Mohd. Yusof, Sha'ri (2011) An empirical investigation of quality tools and techniques practices in Malaysia and Indonesia automotive industries. In: 2011 IEEE International Conference On Quality And Reliability (ICQR 2011).

Nasir Ani, Farid (2011) Microwave induced fast pyrolysis of scrap rubber tires. In: International Meeting Of Advances In Thermofluids (4th Imat 2011).

Nawi, I. N. and Saktioto, Saktioto and Fadhali, Mohamed M. A. A. and Hussain, Mohammad Sakhawat and Ali, Jalil and Yupapin, P. P. (2011) Nd:YAG laser welding of stainless steel 304 for photonics device packaging. In: 2nd International Science, Social Science, Engineering and Energy Conference 2010, I-SEEC 2010, 15 December 2010 - 16 December 2010, Nakhonphanom, Thailand.

Nikakhtar, Amin and Zarei, Mohammad Hossein and Kuan, Yew Wong and Memari, Ashkan (2011) Comparison of two simulation software systems for modeling a construction process. In: 2011 Third International Conference On Computational Intelligence, Modelling & Simulation.

Nikakhtar, Amin and Zavichi, Amir and Wong, Kuan Yew and Hosseini, S. A. Abbasian (2011) Implementing lean construction theory to construction processes waste management. In: International Conference On Sustainable Design & Construction.

Nor Azwadi Che Sidik (2011) Simulation of multicomponent multiphase flow using Lattice Boltzmann Method. In: International Meeting Of Advances In Thermofluids (4th Imat 2011).

Ochsner, Andreas and Da Silva, Lucas F. M. and Altenbach, H. (2011) This special issue of materials science and engineering technology preface. In: 5th International Conference on Advanced Computational Engineering and Experimenting (ACE-X 2011), 3- 6 July 2011, Portugal.

Ochsner, Andreas and Kadir, M. R. A. and Harun, Muhamad Noor and Sadir, Sahba (2011) Simulation of direct perfusion through 3d cellular scaffolds with different porosity. In: 2011 International Conference On Bioscience, Biochemistry And Bioinformatics.

Olugu, Ezutah Udoncy and Kuan, Yew Wong (2011) Validation of green supply chain performance measures in the automotive industry. In: Innovation And Knowledge Management: A Global Competitive Advantage.

Olugu, Ezutah Udoncy and Wong, Kuan Yew (2011) Validation of green supply chain perfomance measure in the automotive industry. In: 16th International Business Information Management Association (IBIMA) Conference.

Ourdjini, Ali (2011) Oxidation and melting charaterization of az91d granules during in-situ melting using flux. In: International Conference On Advanced Design And Manufacturing Engineering (ICADME 2011).

Ouyang, H and Abu Husain, Nurulakmar (2011) Detection of damage in welded structure using experimental modal data. In: 9th International Conference In Damage Assessment Of Structures (DAMAS 2011).

Rajoo, Srithar (2011) Comparison between the steady performance of double-entry and twin-entry turbocharger turbines. In: Proceedings Of Asme Turbo Expo 2011.

Ridzuan, M. J. M. (2011) A study of minimum quantity lubricant (MQL) of RBD palm stearin in plane strain extrusion. In: The 4th International Meeting Of Advances In Thermofluids.

Rohani, Behzad and Abdul Wahid, Mazlan and Mohd. Sies, Mohsin and M. Saq, Khalid (2011) Comparison of eddy dissipation model and presumed probability density function model for temperature prediction in a non-premixed turbulent methane flame. In: The 4th International Meeting Of Advances In Thermofluids.

S., Syahrullail and A., Norhayati (2011) The effect of the diamond shape pits on taper die in extrusion process. In: Asean Conference On Scientific And Social Science Research 2011.

S. M., Hafis and W. N. Imaduddin, Helmi and M. J. M., Ridzuan and S., Syahrullail (2011) Effect of extrusion ratio on paraffinic mineral oil lubricant in cold forward extrusion. In: The 4th International Meeting Of Advances In Thermofluids.

S. S., Arsad and A., Ayob and Z., Ahmad and A., Abdul-Latif and M. N., Tamin and N., Kamsah and S. N. S. S., Noh (2011) Deformation response of steel sheet metal under transverse impact loading. In: Regional Conference On Automotive Research (Recar) 2011.

S. S. R., Koloor and J., Kashani and Abdul Kadir, Mohammed Rafiq (2011) Simulation of brittle damage for fracture process of endodontically treated tooth. In: 5th Kuala Lumpur International Conference on Biomedical Engineering, BIOMED 2011, Held in Conjunction with the 8th Asian Pacific Conference on Medical and Biological Engineering, APCMBE 2011, 20 June 2011 - 23 June 2011, Kuala Lumpur, Malaysia.

Sadir, Sahba and Öchsner, A. and Kadir, M. R. A. and Harun, M. N. (2011) Modeling of bio scaffolds structural and fluid transport characterization. In: World Academy Of Science, Engineering And Technology 50.

Safari, Habib and Izman, S. and Nazim, E. M. and Shah, A. and Idris, S. and Mas Ayu, H. (2011) New pretreatment on co cemented tungsten carbide substrate in a two-step method prior to diamond coating. In: The Proceeding Of The First Iranian Students Scientific Conference In Malaysia.

Samion, Syahrullail and Wira, J. Y. and Kameil, A. H. M. and Fawwaz, W. N. (2011) Fourball tribostester assessment of RBD palm olien as an industrial lubricant. In: International Tribology Conference.

Sharif, Safian (2011) Cutting force prediction using response surface method (RSM) in the milling of medium density fibreboard (MDF). In: 14th International Conference On Advances In Materials & Processing Technologies (AMPT 2011).

Shodiya, S. and Azhar, A. A. and Henry, N. and Darus, A. N. (2011) Numerical simulation of refrigerant flow in adiabatic capillary tubes including metastability phenomenon. In: The 11Th Asian International Conference On Fluid Machinery And The 3rd Fluid Power Technology Exhibition.

Sudin, Izman (2011) Effect of carburization temperature on the formation of carbide layer on vanadium free titanium alloy. In: Advances Processes And System In Manufacturing (APSIM 2011).

Sudin, Izman (2011) Effect of pretreatment processon thermal oxidation of biomedical grade cobalt based alloy. In: The 2011 International Conference On Chemical, Material And Metullurgical Engineering (Iccmme 2011).

Sudin, Izman (2011) Interaction effect if murakami and sulfuric acid solution on the cobalt removal of tungsten carbide substare. In: The 1St International Conference On Chemical Innovation(Icci2011).

Sudin, Izman and Abdul Kadir, Mohammed Rafiq and Anwar, Mahmood and Engku Abu Bakar, Engku Mohammad Nazim and Adila Nalisa, Adila Nalisa and Konneh, Mohamed (2011) Effect of carburization process on adhesion strength of ti carbide layer on titanium alloy substrate. In: 2nd International Conference On Manufacturing Science And Engineeering (ICMSE 2011).

Sudin, Izman and Shayganpour, Amirreza and Idris, Mohd. Hasbullah (2011) Analysis of the effect of sand size and vibration time on surface roughness in lost foam casting of LM6 alloy by design. In: Internationalconference On Materials And Products Manufacturing 2011.

Sudin, Izman and Shayganpour, Amirreza and Idris, Mohd. Hasbullah and Jafari, Hassan (2011) Doe analysis of the influence of sand size and pouring temperature on porosity in LFC of LM6 alloy. In: International Conference On Frontiers Of Manufacturing And Design Science 2011.

T., Kamarul Baharin and S., Syahrullail (2011) Extreme pressure properties investigation of palm olein using four ball tribotester. In: The 4th International Meeting of Advances in Thermofluids (IMAT 2011), 3-4 October 2011, Melaka, Malaysia.

T., Kamarul Baharin and Y., Wira Jazair and S., Syahrullail (2011) Evaluation of oleic acid as additive in automatic transmission fluid. In: The 4th International Meeting of Advances in Thermofluids, 3-4 October 2011, Melaka, Malaysia.

Tahmasebi, Mona and Abd. Rahman, Roslan and Gohari, Mohammad (2011) Optimizing the vibration responses of spray boom suspension system by artificial neural network method. In: 14th Asia Pacific Vibration Conference (APVC 2011).

Tamin, Mohd. Nasir and Abdul-Latif, Ainullotfi and Ayob, Amran and Kamsah, Nazri and Prawoto, Yunan (2011) Damage and fracture mechanics-based design methodology: rate-dependent constitutive and damage models for steel sheet metals. In: Proceedings Of Computationally Optimised Fuel-Efficient Concept Car (Cofec) Volume Iii.

Tamin, Mohd. Nasir and Ayob, Amran (2011) Ductile failure prediction of spot welded lap joint. In: Regional Conference on Automotive Research (ReCAR) 2011, 14-16 December 2011, Kuala Lumpur, Wilayah Persekutuan, Malaysia.

Tiong, Chiong Ing and Mohammed Rafiq, A. K. and Syahrullail, S. and Wira, Y. J. (2011) Experimental study the effect of speeds in wear using fourball tribotester. In: The 4th International Meeting Of Advances In Thermofluids.

Wahi, Noraziah and Ayob, Amran and Elbasheer, Mohd. Kabashi (2011) Effect of autofrettage on allowable pressure of thick-walled cylinders. In: International Conference On Environmental And Agriculture Engineering.

Wan Ali, Wan Khairuddin and Aziz, Amir (2011) A study of basic aluminized propellants characteristics. In: 2011 2nd International Conference On Mechanical, Industrial And Manufacturing Technologies (MIMT 2011).

Wong, King Jye and Gonga, X. J. and Aivazzadeh, S. and Tamin, Mohd. Nasir (2011) Tensile behaviour of anti-symmetric CFRP composite. In: 11th International Conference on the Mechanical Behavior of Material (ICM11), 1 January 2011, Villa Erba, Como, Italy.

Wong, Kuan Yew (2011) Simualtion of squencing rules in a five-similar-machine job shop. In: 16Th International Business Information Management Association (Ibima).

Wong, Kuan Yew and Nikakhtar, Amin and Zarei, Mohammad Hossein and Memari, Ashkan (2011) Comparison of two simulation software for modelling a construction process. In: 3rd International Conference On Computational Intelligence, Modelling And Simulation (CIMSIM 2011).

Yahya, Mohd. Yazid and Bakhsheshi-Rad, Hamid Reza Bakhsheshi and Abdul Kadir, Mohammed Rafiq and Farahany, Saeed and Fereidouni, Amir (2011) Characterization and corrosion behavior of biodegradable Mg-Ca-Zn implant alloys. In: 2011 International Conference On Frontiers Of Manufacturing And Design Science (ICFMD 2011).

Zakaria, Mohd. Zakimi and Jamaluddin, Hishamuddin and Ahmad, Robiah and Loghmanian, Sayed Mohammad Reza (2011) Multiobjective evolutionary algorithm approach in modeling discrete-time multivariable dynamics systems. In: Second International Conference On Computational Intelligence, Modelling And Simulation.

Book

Jamaluddin, Hishamuddin and Yaacob, Mohd. Shafiek and Ahmad, Robiah (2011) Introduction to control engineering. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0787–7

Ramli, Yahaya (2011) Sistem pencegahan kebakaran. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0784–6

Thesis

Abdul Aziz, Azunaidi (2011) Numerical simulation of liquid droplet from porous solids. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering .

Abdul Kadir, Mohd. Rashdan (2011) Information technology (IT) in supply chain management : supplier-manufacturer information collaboration system development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Latiff, Zulkarnain (2011) Stratified-charge two-stroke stepped-piston engine. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahim, Intan Fariza (2011) Fuzzy multi criteria decision making model for the selection of marine antifouling paints. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Rahman, Muhammad Aminullah (2011) Theoritical-operating resonant frequency for cylindrical thermoacoustic resonators. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Wahab, Mohamad Ikbar (2011) Quality improvement at a precision part manufacturing company using six sigma methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Latifah (2011) Properties evaluation of organic binder system for core sand production application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Ahmad Sukri (2011) Design of multipoles wind generator for low wind speed wind turbine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ali, Irwan Shah (2011) Analysis of stack geometry effects on thermoacoustic with particle image velocimetry (PIV). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Asadi, Mahmood (2011) Information system for implementing Kanban. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Asri, Asma Kamarul (2011) Effect of isothermal aging on the corrosion behavior of tin-lead and lead-free solders. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Attarzadeh Niaki, Seyed Mohammad Reza (2011) Cubic interpolated pseudo particle method to predict dynamic behaviour of solid particles. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Aziz, Amir (2011) Combustion characterization of ammonium perchlorate based solid rocket propellant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bagherian, Misam Kashefi (2011) Information modeling for lean manufacturing in supply chain management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Beladi, Behnaz (2011) Wind flow analysis around a four-building cluster. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Bufares, Ahmed M. (2011) Flashback and quenching of laminar premixed flame on rotating burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Azmi, Mohammad Azfar (2011) Effect of melt treatment of LM6 alloy on porosity using quenching and thermal analysis techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Che Zin, Nor Azlina (2011) Optimisation of ship berth capacity for a container port. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Christian Sunday, Chukwuekezie (2011) Nanocrystalline Ni-Co alloy synthesis by high speed electrodeposition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Esmaeili, Moosa (2011) Return mapping schemes in elasto-plastic finite element simulations for different type of hardening and ductile damage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghaderian, Javad (2011) Simulation and analysis of a flat plate solar air heater with and without internal recycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghadimihamzehkoulaei, Pezhman (2011) Sustainability assessment of an automotive component. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ghavamian, Ali (2011) Numerical simulation of the influence of structural imperfections and doping on the mechanical properties of single and multi walled Carbon Nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gohari, Soheil (2011) Failure of composite domes under internal pressure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Goudarzi, Masoud (2011) Shan-Chen model for two phase flow using latticeboltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamzah, Arulhaizal Adam (2011) Reliability assessment for liquefied natural gas ship's distributed control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Harun, Hamran (2011) Wind assisted propulsion system for fuel saving. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan Mohamed Kassem, Hassan Ibrahim (2011) Eddy dissipation model for modeling of turbulent non-premixed combustion with radiation effect using openfoam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan Mohamed Kassem, Hassan Ibrahim (2011) Eddy dissipation modeling of turbulent non-premixed combustion with radiation effect using openfoam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassanipour, Meysam (2011) Integration algorithm for new constitutive equations. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hooi, Hon Mun (2011) Coordinated motion control of a pneumatic artificial muscle actuated robot arm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Husin, Azmi (2011) Numerical analysis of natural convection in porous media using constrained interpolated profile method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mohd. Qadafie (2011) Design and development of high performance hand dryer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim, Mohd. Zamri (2011) Prediction of droplet dynamics on solid surface by the lattice boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ibrahim Elsiti, Nagwa Mejid (2011) Ergonomic study at stationary factory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Johari, Nasrul Hadi (2011) The effect of tracheal stenosis on airflow using numerical modelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, Muhamad Anuwar (2011) Stress analysis of welded ellipsoidal end-to-shell joint of a stainless steel tank. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kamaruzaman, Hasrul Shafiq (2011) Surface integrity study when drilling inconel 718 using coated carbide tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Karimian, Majid (2011) Effects of process parameters on lost foam casting of Al-Si (LM6) alloy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kazi, Suhail (2011) Smart glove for active tremor control. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Khatamirad, Mona (2011) Development of an expert system for machine maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kumaresan, Kartik Sreedharaan (2011) Integration of smed and triz in improving productivity at semiconductor industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lessanibahri, Sina (2011) A generic facility location network design for a closed-loop supply chain using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Loh, Wai Hoong (2011) Framework for sustainability assessment for construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mahal, Yussof (2011) Practical planning model for port and harbour dredging. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Majlan, Kamyar Ahmadi (2011) Synthesis and characterization of ni-cnt composite coating produced by direct electro plating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mamat, Mohd. Fauzi (2011) Corrosion behavior of low carbon steel welded joint in 3.5% sodium chloride (NaC1) solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansor, Ahmad Fairuz (2011) Performance evaluation of wire electrical discharge machining (WEDM) on inconel 718 using response surface methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mansour Saqr, Khalid Mohammed Mohiee Eldien (2011) Aerodynamics and thermochemistry of turbulent confined asymmetric vortex flames. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Noor, Noor Jasmawati (2011) The study of diffusion brazing of stainless steel 304 using pure copper foil interlayer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Nor, Nor Syarizan (2011) Microwave induced fast pyrolysis of scrap tires. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mavalizadeh, Seyedmehdi (2011) Finite element simulation of composite materials based on carbon nano tubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Dom, Mohd. Fadzil Rizuan (2011) Management model for oil pollution prevention and control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mehraban, Saleh (2011) Electrodeposition and synthesis of nano alumina nickel composite coating by direct electroplating. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mehrabbegi, Sajad (2011) Lean supply chain management and its effects in automotive industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mirbirjandian, Ehsan (2011) A simulation study on kanban control strategies. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamad Zulkifli, Mohd. Zulhafiz (2011) Effect on adhesion quality of hydroxyapatite on investment casting mould. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed, Faiq (2011) Microstructural influence on the corrosion behavior of dual phase steels in water and 3.5% sodium chloride solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohamed Aly, Hossam Said (2011) An improved mathematical model for predicting liquid spray and atomization characteristics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Nor, Nur Safwati (2011) Vibration suppression of hard disk drive mechanism using intelligent active force control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Norddin, Khairul Hafiz Norddin (2011) Development of Total Productive Maintenance (TPM) framework in fertilizer process plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mokhtar, Nur Hazwani (2011) The effect of functional endoscopic sinus surgery to the flow characteristic in nasal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Motasemi, Farough (2011) Production of biodiesel from used cooking palm oil by using microwave irradiation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhamad, Mohd. Alsafarin (2011) Fluid flow simulation after turbinate removal at nasal cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhammad Yazid, Muhammad Noor Afiq Witri (2011) Simulation of droplet dynamics using lattice boltzmann method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Muhammed Salleh, Noor Masnira (2011) Work improvement at an animal feed mill. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Naiem Hamad, Osama Hamad (2011) System identification and design PID controller for automotive air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nallappan, Mutukumaar (2011) Ball attach yield improvement-DMAIC approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nassiri, Fardokht (2011) Information system for implementing aggregate planning in supply chain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Lim Yong (2011) Man machine ratio (MMR) improvement through discrete event simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nik Hassan, Nik Abdullah (2011) A numerical simulation of compressible flow over wedge. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nilda Tri Putri, Nilda Tri Putri (2011) Self assessment tool for quality engineering in Malaysia and Indonesia automotive companies. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noshadi, Amin (2011) Intelligent active force control of 3-RRR planar parallel manipulator. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Nurcholis, Nurcholis (2011) Ship manoeuvring in restricted water with influence of bank and ship to ship interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Olanrewaju, Oladokun Sulaiman (2011) Safety risk and reliability model for inland water transportation. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Omar, Mohd. Hazri (2011) Determination of operational deflection shapes by using odsfrf. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Osman, Ali Hassan (2011) Creep-rupture behavior of AISI 347 austenitic stainless steel foils at different temperature and stress levels. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Othman, Norazila (2011) Design and development of 50-N hydrogen peroxide monopropellant rocket thruster. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Perianan, Saravanan (2011) A quality model development to prevent quality excursion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Perumal, Sritharan (2011) Work improvement of semiconductor backend equipment using simulation modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rahim, Mohammad Zulafif (2011) Parameter analysis on wire-cut EDM process of silicon carbide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rashidi, Nur Syazana (2011) The effect of silica and alumina in sol-gel hydroxyapatite coating on stainless steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Rohani, Behzad (2011) Numerical investigation of hydrogen enrichment effect on industrial natural gas flames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabaghi, Mahdi (2011) Optimization of multi-echelon supply chain kanban model using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sabli, Siti Raudah (2011) Production planning at an animal feed mill. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sadeghi, Rasoul (2011) Effects of flux composition on melting behaviour of magnesium AZ91D alloys cast by investment casting in-situ melting technique. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Said, Nor Azinee (2011) Pressure fluctuation analysis for heated cylinder in external flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salehi, Mehran (2011) Numerical investigation of blood flow in a stenosed artery using cubic interpolation profile scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Saputra, Noverdo (2011) Longitudinal stability and motion of trimaran wing in ground effect model during take-off. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shafie, Ahmad Shafarin (2011) Micro-pits effectiveness for controlling friction in plane strain extrusion. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sobhani, Farshid (2011) Optimize of distribution allocation quantity in supply chain using genetic algorithm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulong, Mohd. Ayub (2011) Numerical characterisation of hollow sphere composites based on perforated inclusions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Supriyo, Bambang (2011) Realtime implementation of proportional integral derivative based ratio controllers for electro-mechanical dual acting pulley continuously variable transmission. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Syahrom, Ardiyansyah (2011) Design and fabrication of artificial cancellous bone. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Taheri, Mohammad Mahdi (2011) The effect of apply electric field on the orientation of multi walled carbon nanotubes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Takaloo, Ashkan Vakilipour (2011) Direct high speed electroplating of nano-crystalline nickel on titanium surface. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Lean Huat (2011) Surface integrity of Durian wood sanding process using A12O3 abrasives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tan, Poh Lai (2011) Evaluation and modelling of machined wood surface roughness and fuzziness. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Teshnizi, Shokrollah Sharifi (2011) Mechanical behaviour of GFRP cylinder subjected to radial patch loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tofa, Mohammad Mobassher (2011) Resistance of wing in ground effect craft model during take-off. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Torabizadeh, Mohammad Ehsan (2011) Impact of aligning supply chain strategy with information system strategy on supply chain and firm performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Udoncy, Olugu Ezutah (2011) A closed loop supply chain performance measurement system for the automotive industry. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Umar, Alkali Adam (2011) Wear mechanism and surface integrity studies when turning hardened tool steel using wiper coated ceramic tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Vanany, Iwan (2011) A framework for assessing the viability of radio frequency identification project in healthcare sector. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wee, Jonathan Jian Meng (2011) Total productive maintenance in manufacturing industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yahya, Azliana (2011) Finite difference modeling of beams in the elastic and plastic range. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yola, Melfa (2011) A methodology of life cycle assessment for material selection in product development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Aminudin (2011) Engineering, science, technology, quality and safety awareness among Malaysian fishermen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zakaria, Norasalwa (2011) Pyrolysis of rubber gloves for producing liquid fuel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zeimaran, Ehsan (2011) Synthesis of new supramolecular elastomers from sunflower oil and palm acid oil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Chemical Engineering.

Zolfagharian, Ali (2011) Optimization techniques for vibration control of wiper blade system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.