Universiti Teknologi Malaysia Institutional Repository

Items where Division is "Civil Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items: 275.

A

A., Eisazadeh and K. A., Kassim and H., Nur (2010) Molecular characteristic of phosphoric acid treated soils. World Academy of Science, Engineering and Technology Journal, 63 . 001-003. ISSN 2010-376X

A., Marto and A., Adnan and Hendriyawan, Hendriyawan and M., Irsyam (2010) Microzonation maps for Kuala Lumpur and Putrajaya. Malaysian Journal of Civil Engineering, 23 (1). pp. 63-85. ISSN 1823-7843

A. A., Bayan and S., Sarifudin and M. H., Osman (2010) Structural performance of bolted moment connection of cold-formed single channel section. Journal of Constructional Steel Research, 2 (4). pp. 559-607. ISSN 2049-3444

A. Malek, Marlinda and Shamsuddin, Mariyam and Harun, Sobri (2010) Restoration of hydrological data in the presence of missing data via kohonen self organizing maps. In: New Trends in Technologies. InTech, Croatia, pp. 223-242. ISBN 978-953-7619-62-6

A. Rahman, Marwa (2010) Critical state of fly ash-bottom ash mixture. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Rahim , Hairol (2010) Effective project delivery-strategies for successful implementation of projects under 10th Malaysia plan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ab. Rahman, Hizamul-Din (2010) Establishing a project management office for a more effective and efficient implementation of projects in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd Rahman, Ahmad Baharuddin and Jen Hua, Ling and Ibrahim, Izni Syahrizal (2010) Performance of grouted sleeve connectors subjected to incremental tensile loads. Malaysian Construction Research Journal, 6 (1). pp. 39-55. ISSN 1985-3807

Abd. Khalil, Muhamad Khairi (2010) Analysis of cold-formed steel connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Malek, Anie Raflikha (2010) Evaluation on the effects of sea level during El Nino and La Nina events in Malaysian water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahim , Nurzalisa (2010) Sistem perolehan reka dan bina bagi projek Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rahman, Ahmad Baharuddin and Ling, Jen Hua and Ibrahim, Izni Syahrizal and Abd. Hamid, Zuhairi (2010) Investigating the performance of grouted sleeve connectors under tensile load. Malaysian Construction Research Journal, 6 . pp. 39-55. ISSN 1985-3807

Abd. Rahman, Siti Khalijah (2010) Sand behavior characterization for various grain size distributions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdelgalil, Ahmed S. A. (2010) Comparative assessment of signalized and unsignalized roadway intersections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Awal, A. S. M. and M. Z., Hossain (2010) Experimental validation of a theoretical model for flexural modulus of elasticity of thin cement composite. Construction and Building Materials, 25 . pp. 1460-1465. ISSN 0950-0618

Abdul Awal, A. S. M. and Md. Z., Hossain (2010) Flexural response of hybrid carbon fiber thin cement composites. Construction and Building Materials, 25 (2). pp. 670-677. ISSN 0950-0618

Abdul Awal, A.S. M. and Hussin, M. Warid (2010) Influence of palm oil fuel ash in reducing heat of hydration of concrete. Journal of Civil Engineering (IEB), 38 (2). pp. 153-157. ISSN 1993-8128

Abdul Aziz , Mohd. Azizi (2010) Performance of stone mastic asphalt using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Hamid, Abdul Rahim and Yahya, Khairulzan and Lim, Wei Han (2010) Management competencies for preventing and reducing stress at construction site. Built Environmental Journal, 7 (2). pp. 32-37. ISSN 1675-5022

Abdul Hamid , Atikah (2010) Proposal for the enhancement of JKR matrix organization. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Majid, Roshida (2010) Rekabentuk tingkap dan pemandangan dalam pembangunan perumahan teres satu tingkat. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Abdullah, Khairunisa and Hussin, Mohd. Warid (2010) Fire resistance properties of palm oil fuel ash cement based aerated concrete. Concrete Research Letters, 1 (3). pp. 107-114. ISSN 2180-1371

Abdullah, Redzuan and Easterling, William Samuel (2010) Closure to determination of composite slab strength using a new elemental test method. Journal of Structural Engineering, 136 (8). 1033 - 1034. ISSN 0733-9445

Abdullahi, Mu'azu M. and Ali, Nazri and Ahmed, Kamarudin B. (2010) Bioengineering assessment on sloppy ground. American Journal of Environmental Sciences, 6 (4). pp. 357-364. ISSN 1553-345X

Abu Bakar, Suhaimi and Saleh, Abd. Latif (2010) A technique to remove second order singularity application in the boundary element method for elastoplasticity plane stress analysis. Electronic Journal of Boundary Elements, 8 (1). pp. 1-9. ISSN 1542-3891

Abu Bakar, Akrima (2010) Indirect tension test of hot mix asphalt as related to temperature changes and binder types. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Abu Samah , Rosiah (2010) Proposal for evaluation methodology of competency based project management training. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Achara , Bitrus Emmanuel (2010) Behavior of lightweight concrete containing palm oil shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adnan, Azlan and Suhatril, Meldi and M. Taib, Ismail (2010) The mechanical properties of high strength concrete for box girder bridge deck in Malaysia. Concrete Research Letters, 1 (1). pp. 35-44. ISSN 2180-1371

Aghlara, Reza (2010) Application of 2-dimensional digital image correlation for mapping bond strain and stress distribution in concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Arshad and Sadighi, Sepehr and Seif Mohaddecy, S. Reza (2010) 6-Lump kinetic model for a commercial vacuum gas oil hydrocracker. International Journal of Chemical Reactor Engineering, 8 . ISSN 1542-6580

Ahmad, Noraziah (2010) Performance of constructed wetlands using Vetiveria zizaniodes for sewage treatment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Yusof (2010) Bending behavior of timber beams strengthened using fiber reinforced polymer bars and plates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Ahmad Rodzuan, Nor Sarwani (2010) Kesan teknik peredaan lalu lintas terhadap pengurangan laju kenderaan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Shakri, Md. Rajuna (2010) The tuberculosis transmission sources and control factors for indoor environment sustainability Hospital. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Shukri, Faten Adilah (2010) Malaysia construction experience in deployment of crane services for construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad Zahidi, Mohd. Hafiz (2010) Kajian olahan air larut lesap menggunakan tumbuhan sensevieria trifasciat a di dalam sistem tanah bencah buatan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmadnia, Behzad (2010) Apartments ownership and maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed, Zubair and Hwang, S. J. and Shin, S. K. and Song, J. (2010) Enhanced toluene removal using granular activated carbon and a yeast strain candida tropicalis in bubble-column bioreactors. Journal Of Hazardous Materials, 176 (13). 849 -855. ISSN 0304-3894

Ahmed Bamaga, Saleh Omar (2010) The effects of POFA from different sources on durability of high strenght concrete in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed Suliman, Ali H. (2010) Using HEC-RAS and qual2e to assess Johor River water quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Al Amri, Abdullah Ali (2010) The performance of membrane bioreactor in treating high temperature municipal wastewater. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Al. Dymany, Haidar R. Hashim (2010) Behaviour of wide reinforced concrete beam in shear. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Bayan Anwer and Saad, Sariffuddin and Osman, Mohd. Hanim (2010) Cold-formed steel frame with bolted moment connections. International Journal of Civil and Structural Engineering, 1 (3). pp. 534-544. ISSN 0976-4399 (Online)

Alias, Nor Eliza (2010) An experinmental study of tsunami run-up on a vegetated coastal slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alshehri, Dhafer Saad A. (2010) The shear behavior of steel fiber reinforced concrete beam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amaranazan, Anilarasu (2010) Hill land development challenges in Penang Island. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amirrudin, Siti Nurulhuda (2010) Construction duration for various healthcare facility projects for public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amiruddin, Mohd. Noor Asyraf (2010) Study on the skidding performance of stone mastic asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anuar, Aznan Nor and Abd. Azizi, Azri Hizami and Mohamed, Mohd. Firdaus (2010) Enhanced aerobic sludge granulation in cyclic aerobic granular sludge bioreactor (CAgSBio) by Mg2+ augmentation. Project Report. Faculty of Civil Engineering, Skudai, Johor. (Unpublished)

Ariffin , Rohizat (2010) Allowable interface slip of composite slab to achive full interaction behaviour. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arvin, Yashar (2010) Improvement of structural stability for multi – storey building by using composite column and cable connection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asaad Zeki, Mohammad Ali (2010) Effectiveness of cathodic protection in addressing corrosion of reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asif, Mohd. Azmi (2010) Cadangan Perjanjian Aras Perkhidmatan (SLA) untuk aktiviti di antara sektor bisnes dan sektor pakar di JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asof, Marwan and Gofar, Nurly (2010) Block model approach for analysis of rock bench stability in open pit mines. Malaysian Journal of Civil Engineering , 22 (1). pp. 119-132. ISSN 1823-7843

Aziz, Farha (2010) CO2 and surface temperature reduction on building surface using green walls. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

B

Bahari, Nurul Anis (2010) Penggunaan abu terbang arang batu sebagai bahan pengisi dalam campuran panas konkrit berasfalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baharuddin Pallan, Nor Faizah (2010) Heavy metal in pen shells (Bivalvia-Pinnidae) at Merambong Island and Merambong Seagrass Shoal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakar, Khairul Bariyah (2010) Garbage enzyme as an alternative method in treatment of sullage. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakhary, Norhisham (2010) Statistical vibration based damage identification using artificial neural network. Jurnal Teknologi, 52 . pp. 49-60. ISSN 0127-9696

Bakhary, Norhisham and H., Hao and Deeks, Andrew J. (2010) Substructuring technique for damage detection using statistical multi-stage artificial neural network. Advances In Structural Engineering, 13 (4). 619 -639. ISSN 1369-4332

Bakhary, Norhisham and Hao, H. and Deeks, A. J. (2010) Structure damage detection using neural network with multi-stage substructuring. Advances in Structural Engineering, 13 (1). 95 -110. ISSN 1369-4332

Bakhary, NorHisham and Hao, Hong and Deeks, Andrew J. (2010) Structure damage detection using neural network with multi-stage substructuring. Advances in Structural Engineering, 13 (1). pp. 1-16. ISSN 1369-4332

Balasbaneh , Ali Tighnavard (2010) Hot climate air flow study and affect of stack ventilation in residential building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bamaga, Saleh and Ismail, Mohamed A. and Hussin, Mohd. Warid (2010) Chloride resistance of concrete containing palm oil fuel ash. Concrete Research Letters, 1 (4). pp. 158-166. ISSN 2180-1371

Basravi, Amirhossein (2010) Finite element analysis of reinforced concrete column with longitudinal hole. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ben-Edigbe, Johnnie and Mohd. Ibrahim, Iffazun (2010) Empirical delays from actuated and optimised static signal settings compared. Journal of Engineering and Applied Sciences, 5 (1). pp. 42-48. ISSN 1819-6608

Budiea, A. and Hussin, Mohd. Warid and Muthusamy, K. and Ismail, M. E. (2010) Performance of high strength POFA concrete in acidic environment. Concrete Research Letters, 1 (1). pp. 14-18. ISSN 2180-1371

C

Che Ali, Mukhtar (2010) Development of quantitative quality cost matrix for Malaysian construction quality management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ali, Mukhtar and Md. Zin, Rosli and Abd Hamid, Zuhairi and Ayub, Abdul Rahman (2010) Quality cost in the construction industry-preliminary findings in Malaysia. The Journal of The Design and Build Environment , 6 . pp. 29-43. ISSN 1823-4208

Che Bakar, Mohd. Basri (2010) Shear capacity steel fibre reinforced concrete composite slab. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Kamaruddin, Naadira (2010) Adequacy of contract provision in managing construction failure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Puan, Othman and Ismail, Che Ros (2010) Dilemma zone conflicts at isolated intersections controlled with fixed-time and vehicle actuated traffic signal systems. International Journal of Civil & Environmental Engineering, 10 (3). pp. 19-25. ISSN 2227-2763 (Print); 2077-1258 (Electronic)

Chelliapan, Shreeshivadasan and Wilby, Thomas and Sallis, Paul (2010) Treatment of pharmaceutical wastewater containing tylosin in an anaerobic-anaerobic reactor system. Water Practice and Technology, 5 (1). pp. 1-16. ISSN 1751-231X

Cheng, Yew Leong (2010) Integrating green initiatives into existing commerical buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Christophe, Theys and Theo E., Notteboom and Athanasios A., Pallis and Peter W., De Langen (2010) The economics behind the awarding of terminals in seaports: Towards a research agenda. Research in Transportation Economics, 27 . pp. 37-50. ISSN ISSN: 0739-8859

D

Dabo Baba, Hammad (2010) Building information modeling in local construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Denan, F. and Osman, Mohd. Hanim and Saad, Sariffudin (2010) The study of lateral torsional buckling behavior of beam with trapezoid web steel section by experimental and finite element analysis. International Journal of Recent Research and Applied Studies (IJRRAS), 2 (3). pp. 232-240. ISSN 2349 - 4891

Denan, Fatimah and Osman, Mohd. Hanim and Saad, Sariffuddin (2010) The study of lateral torsional buckling behaviour of beam with trapezoid web steel section by experimental and finite element analysis. International Journal of Research and Reviews in Applied Sciences (IJRRAS), 2 (3). pp. 233-240. ISSN 2076-734X (Print); 2076-7366 (Online)

E

Edigbe, Johnnie Ben and Rahman, Rosnita (2010) Multivariate school travel demand regression based on trip attraction. World Academy of Science, Engineering and Technology, 42 . pp. 1169-1173. ISSN 2010-3778

Ee , Lee Chuan (2010) Knowledge management in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eisazadeh, Amin (2010) Physicochemical behaviour of lime and phosphoric acid stabilized clayey soils. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Embong , Samri (2010) Faktor-faktor kritikal yang mempengaruhi tempoh penyiapan projek-projek Jabatan Kerja Raya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Esmaeeli, Hamed (2010) Road accident analysis factors. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

F

Fakharazi , Mohammad Faazil (2010) Kelewatan proses pengambilan tanah - kesan terhadap kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fallah, Iman Abbaszadeh (2010) Design consideration for motorist at urban four-arm signalize intersection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Farsangi, Ehsan Noroozinejad (2010) Seismic vulnerability analysis of various types of dams with finite element methods. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

G

Ganjbakhsh, Hamed (2010) Building performance diagnoses using post occupancy evaluation for low energy office building practices. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Garkoroudi, Abolghasem Zalfi (2010) Influence of road humps on speed-density relationship. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Giwangkara, Grawira Ganjur (2010) A study on marine sand as a jointing material for concrete block pavement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Golzarpoor, Hamed (2010) Application of BIM in sustainability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Goodarzi, Mohsen Salarpour (2010) Flood mapping of Sungai Skudai using infoworks RS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gopalan, Thanath (2010) Performance prediction of prefabricated vertical drains beneath embankment on soft ground by finite element analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

H

H., Mohamad and K., Soga (2010) Thermal strain sensing of optical cables using brillouin optical time domain reflectometry. Geotechnical Testing Journal, 37 (2). pp. 333-346. ISSN 0149-6115

H., Mohamad and K., Soga and A., Pellew and P. J., Bennett (2010) Performance monitoring of a secant piled wall using distributed fiber optic strain sensing. ASCE Journal of Geotechnical and Geoenvironmental Engineering, 137 (12). pp. 1236-1243. ISSN 1090-0241

H., Niroumand and Kh. A., Kassim and Nazir, Ramli (2010) Experimental study of horizontal anchor plates in cohesive soils. Electronic Journal of Geotechnical Engineering (EJGE), 15 . pp. 879-886. ISSN 1089-3032

Hainin, Mohd. Rosli and N. I. M., Yusoff and G. D., Airey (2010) Predictability of complex modulus using rheological models. Asian Journal of Scientific Research, 3 (1). 18 -30. ISSN 1992-1454

Hajihasani, Nadia (2010) Detection of spalling using vibration data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamidi, Behzad (2010) A green cost allocation model for office and commercial buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamood Alshameri, Badee Abdulqawi (2010) Engineering properties of older alluvium. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Zaiton and Oldham, David (2010) A markovian approach to the modeling of sound propagation in urban streets. Jurnal Teknologi, 52 . pp. 61-75. ISSN 2180-3722

Hasan, Muhamad Khair (2010) Improving time estimation in JKR project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hasan, Muzamir and Abdullah, Amizatulhani and Marto, Aminaton (2010) The correlations and soil properties analysis of Temerloh, Pahang. Journal of Engineering and Technology, 1 (1). pp. 63-74. ISSN 2180-3811

Hasan, Siti Norazela (2010) Simulation of river embankment stability : a case study on failure and remedial method at Muar River, Panchor, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashir, Adilah (2010) Claim issues in structural failure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Heap, Yih Chong and Mohamad Zin, Rosli (2010) Application of the delphi into construction law research. The International Journal of Interdisciplinary Social Sciences, 5 (1). pp. 199-206.

Hermanto, Budi (2010) Schedule risk analysis in offshore development project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hin Joo, Charles Bong and Katimon, Ayob (2010) Non-darcian transmission of water properties in malaysian peat soil. The IUP Journal of Soil and Water Science (India), 3 (2). pp. 40-34. ISSN 0974-6560

Hossain, M. Z. and Abdul Awal, A. S. M. (2010) A study on flexural modulus and ductility of laminated cementitious composites. Malaysian Journal of Civil Engineering, 22 (2). pp. 216-226. ISSN 1823-7843

Hussin, M. W. and Abdullah, K. and Menon, N. A. (2010) Utilization of palm oil fuel ash in aerated concrete. Mehran University Research Journal of Engineering & Technology . ISSN 0254-7821

Hussin, Mohd. Warid and Muthusamy, Khairunisa and Zakaria, Fadhadli (2010) Effect of mixing constituent toward engineering properties of pofa cement-based aerated concrete. Journal of Materials in Civil Engineering, 22 (4). 287 - 295. ISSN 0899-1561

I

Ibrahim, Faizah (2010) Improving the process of capturing clients’ needs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ibrahim, Faizah (2010) Improving the process of capturing clients' needs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak , Nurlaili (2010) Shear behaviour of wire reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Ahmad Azizi (2010) Penjadualan projek untuk pembinaan jalan di kawasan tanah berpaya. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Asmadi and Mohamad, Mohamad Ibrahim and Yahya, Muhamad Azani (2010) Time impact of scheduling simulation for high rise building. International Journal of Sustainable Construction Engineering & Technology, 1 (2). pp. 55-63. ISSN 2180-3242

Ismail, Mohamed A. and Budiea, Ahmad M. A. and Hussin, Mohd. Warid and Muthusamy, Khairunisa (2010) Effect of POFA fineness on durability of high strength concrete. The Indian Concrete Journal, 84 (11). pp. 21-28. ISSN 0019-4565

Ismail, Mohamed A. and Hussin, Mohd. Warid and Ismail, Mohammad (2010) Palm oil fuel ash as the future supplementary cementitious material in concrete. Concrete Plant International (3). pp. 38-45. ISSN 1437-9023

Ismail, Mohammad and Hamzah, Esah and Goh, Chun Guan and Abd. Rahman, Ihsan (2010) Corrosion performance of dual-phase steel embedded in concrete. Arabian Journal For Science and Engineering, 35 (2A). 81 - 90. ISSN 1319-8025

Ismail, Mohammad and Ismail, M. E. and Lau, S. K. and Muhammad, Bala and Majid, Zaiton (2010) Fabrication of bricks from paper sludge and palm oil fuel ash. Concrete Research Letters, 1 (2). pp. 60-66. ISSN 2180-1371

Ismail, Mohammad and Muhammad, Bala and Ismail, Mohamed El Gelany (2010) Compressive strength loss and reinforcement degradations of reinforced concrete structure due to long-term exposure. Construction and Building Materials, 24 (6). 898 - 902. ISSN 0950-0618

Ismail, Noor Ismaniza (2010) Kajian kualiti air bekalan di Jitra,Kedah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Nur Mala (2010) Strategies to enhance the usage of Cad Based Measurement Software (CBMS). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Tarmizi and Alang Othman, Mazlina and Fadzil, Abu Bakar and Harun, Sobri and Zainuddin, Zaitul Marlizawati (2010) Deposition of sediments in detention pond. Malaysian Journal of Civil Engineering, 22 (1). pp. 95-118. ISSN 1823-7843

Ismail, Zulhilmi and Shiono, K. (2010) The stage-discharge, sediment transport, bedforms and drag force influenced by floodplain roughness. International Review of Civil Engineering, 1 (4). pp. 260-265. ISSN 2036-9913

Ismail, Zulkhairi (2010) Techniques for valuation of variation works. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail , Nazirah (2010) Contractor's time performance in affordable housing program. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

J

Jaafar, Redzuan (2010) Collaboration and communication of project team in PWD web based project monitoring system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jaffar, Siti Rahayu (2010) Strength behaviour of column studs in prefabricated wall panels using cold-formed steel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahidin, Mohammed Ridzuan (2010) Slope stability analysis of critical slope along North South Highway (Southern Region) using limit equilibrium method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jahromi, Bahman Esfandiar and Jaffar Sidek, Faridah (2010) Conceptualization of submerged structures as tsunami barrier. Malaysian Journal of Civil Engineering, 22 (1). pp. 83-94. ISSN 1823-7843

Jorat, Mohammad Ehsan (2010) Strength and compressibility charactrisitcs of kaolin mixed with bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Juhari, Mohd. Al Jeffrie (2010) Effect of seismic loading in slope stability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

K

Kadirin , Noraisah (2010) The potential adoption of relational contracting in Jabatan Kerja Raya Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karunanidee, Vigneshwaran (2010) Load resistance behaviour and installation assessment of driven spun pile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kasraei, Mohammadreza (2010) Energy life cycle cost analyzing (ELCCA) in residential building to energy efficiency approach in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kassim, Khairul Anuar and Nazir, Ramli and Niroumand, Hamed (2010) Analytical and numerical studies of vertical anchor plates in cohesion less soils. Electronic Journal of Geotechnical Engineering (EJGE), 15 . pp. 123-126.

Kassim, Khairul Anuar and Nur, Hadi and Eisazadeh, Amin (2010) Physicochemical characteristics of phosphoric acid stabilized bentonite. Electronic Journal of Geotechnical Engineering, 15 D . 1 - 10. ISSN 1089-3032

Khalid, Nazifa (2010) A study on electronic waste (e-waste) in high educational institution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalid, Nor Ikhwan (2010) Adhesion on different rate of binder and aggregate for chip seal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalil, Mohammed S. and Muhammad, Dzulkifli and Khan, Muhammad Khurram and Alghathbar, Khaled (2010) Fingerprint verification based on statistical analysis. In: 2010 5th International Conference on Future Information Technology. Institute of Electrical and Electronics Engineers, New York, pp. 1-5. ISBN 978-142446950-5

Khanjanzadeh, Arman (2010) Assessment of pedestrian and motorized traffic-mix in town. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kikuchi, Akira and Hakim, Luhcman and Heryansyah, Arien and Romaidi, Romaidi (2010) Significance of the easy-to-use water quality checker for participative environmental monitoring and experience based learning. International Journal of Tropical Life, 1 (1). pp. 17-21. ISSN 2087-5517

Ku Sulaiman, Ku Safirah (2010) Seismic behaviour of tunnels with different soil types and depths. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kuok, K. K. and Harun, Sobri and Shamsuddin, Siti Mariyam (2010) Particle swarm optimization feedforward neural network for modeling runoff. International Journal of Environmental Science and Technology, 7 (1). 67 -78. ISSN 2227-2763

Kuok, King Kuok (2010) Parameter optimization methods for calibrating tank model and neural network for rainfall-runoff modelling. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kuok, Kuok Kin and Harun, Sobri and Shamsuddin, Siti Mariyam and Chiu, P. (2010) Evaluation of daily rainfall-runoff model using multilayer perceptron and particle swarm optimization feed forward neural networks. Journal of Environmental Hydrology, 18 . 1 -16. ISSN 1058-3912

L

Laily Roslan, Rose Diyana (2010) Brick material for construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Lip Voon (2010) Effects of land use on river and estuarine water quality at Johor straits and its subsequent effects on green mussels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ling, Jen Hua and Abd. Rahman, Ahmad Baharuddin and Ibrahim, Izni Syahrizal (2010) Tensile performance of grouted splice connectors in precast concrete structures. Precast Concrete Elements, Volume 5/2010, Trade Journals for Concrete Industry, Cologne, Germany. (5). pp. 160-166.

Ling, T. C. and Mohd. Nor, Hasanan and Lim, S. K. (2010) Using recycled waste tyres in concrete paving blocks. Proceedings of Institution of Civil Engineers: Waste and Resource Management, 163 (1). pp. 37-45. ISSN 1747-6526

Liu, Z. and Hashim, Noor Baharim and Kingery, W. L. and Huddleston, D. H. (2010) Fecal coliform modeling under two flow scenarios in St. Louis Bay of Mississippi. JOURNAL OF ENVIRONMENTAL SCIENCE AND HEALTH PART A-TOXIC/HAZARDOUS SUBSTANCES & ENVIRONMENTAL ENGINEERING, 45 (3). 282 -291. ISSN 1093-4529

Loh, Wee Loon (2010) Performance of pullout resistance of anchored earth system by field pullout test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Low, Tian Hock (2010) Vibration based damage detection using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M

Majid, Mohamad Zaki (2010) Beam-to-column connection using hollow steel section for precast concrete frames. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansour, Farnoud Rahimi (2010) Flexural behavior of precast concrete slab with steel fibre concrete topping. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Marto, Aminaton and Kassim, Khairul Anuar and A., Muhardi and Makhtar, Ahmad Mahir and Lee, Foo Wei and Yap, Shih Lim (2010) Engineering characteristics of Tanjung Bin coal ash. Electronic Journal of Geotechnical Engineering, 15 . 1117 -1129. ISSN 1089-3032

Mat Lazim, Azlinda (2010) Critical success factors for contracting organization during recession. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mat Yusop, Norwahida Azwani (2010) Calibration of soil moisture accounting (SMA) parameters in Sungai Johor river basin using hydrologic model HEC-HMS. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Noor, Norhazilan and Nor Ozman, Nor Apaziah and Yahaya, Nordin and Mohd. Ali Napiah, Mohd. Nazmi and Abdullah, Zaabah (2010) PICA: pipeline integrated corrosion assessment tool for structure integrity. Malaysian Journal of Civil Engineering, 22 (2). pp. 246-263. ISSN 1823-7843

Md. Rabani , Norman (2010) Improving safety control of PWD project through the inclusion of safety requirement in the bill of quantity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Tahir, Mahmood and Mohamad, Sahrin and Osman, Mohd. Hanim and Ismail, Mohamad and Saad, Sarifuddin and Saim, A. Aziz and Ahmad, Yusof and Mohd. Yassin, Airil Yasreen (2010) Steelwork design guide to BS5950-1:2000. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0730–3

Md. Yusof, Puteri Juieta Salwanni (2010) Investigation on crack problems of precast box culverts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Yusoff, Nur Izzi and Ginoux, Marc-Stephane and Airey, Gordon Dan and Hainin, Mohd. Rosli (2010) Modelling the linear viscoelastic rheological properties of base bitumens. Malaysian Journal of Civil Engineering, 22 (1). pp. 22-37. ISSN 1823-7843

Minhans, Anil (2010) Formulation of traffic management strategies in disasters. Institute of Town Planners, India Journal, 7 (2). pp. 85-97. ISSN 0537-9679

Mohamad, Edy Tonnizam and Komoo, Ibrahim and Kassim, Khairul Anuar and Md. Noor, Muhazian (2010) Effectual excavation of weathered rocks using geological features. In: Quarries and Quarrying - Sustainable Development, Green Technology and Best Practices. Institute of Quarrying Malaysia, Selangor Malaysia, pp. 124-134. ISBN 978-967-10029-0-2

Mohamad, Edy Tonnizam and M. Noor, M. and Saad, R. (2010) Potential effects of quarry operations on workforce safety. In: Quarries and Quarrying - Sustainable Development, Green Technology and Best Practices, Institute of Quarrying Malaysia. Institute of Quarrying Malaysia, Selangor Malaysia, pp. 312-336. ISBN 978-967-10029-0-2

Mohamad, Hisham and Bennett, Peter Jonathan and Soga, Kenichi and Mair, Robert James and Bowers, Keith H. (2010) Behaviour of an old masonry tunnel due to tunnelling-induced ground settlement. Geotechnique, 60 (12). 927 - 938. ISSN 0016-8505 (Print); 1751-7656 (Electronic)

Mohamad, Madzura (2010) Kajian perbandingan kualiti efluen domestik antara sistem rawatan hi-kleen dan sistem IMHOFF. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Mazizah Ezdiani (2010) Tensile strength and behaviour of grouted splices integrated with flexible aluminium duct. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Noor Asiah (2010) River mouth stability of Sungai Papar, Sabah. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Sabri, Mohd. Fahmi (2010) Performance of asphaltic concrete using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Yusoff, Izham and Abdul Rahman, Alias and Katimon, Ayob (2010) A 3-D volumetric soft geo-objects data model for dynamic streamflow generating processes. J.Environmetal Hydrology, 18 (12). pp. 214-220. ISSN 1790-5095

Mohamed, Nurul Wahida (2010) Road maintenance management system : a case study at public work department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Yusuf Abdinasir (2010) Slenderness study of composite slabs modeled by explicit dynamic procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Zalina (2010) Design verification on bored pile within Kenny Hill formation via static load test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed, Khalid Ahmed (2010) Sustainable development factors for land development in UTM Johor Bahru campus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Ali, Nasly and Abu Azam, Haniisah (2010) Structured programming: using C++ in simple steps with engineering applications. Penerbit UTM, Skudai, Johor Bahru. ISBN 978–983–52–0754–9

Mohammad Joshani, Mohammad Joshani (2010) Nonlinear finite element analysis of steel-concrete composite slabs using explicit dynamics procedure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed Abdullahi, Muazu and Ali, Nazri and Ahmed, Kamarudin (2010) Elapse time factor on induced vegetative moisture uptake in an unsaturated soil. American Journal of Engineering and Applied Sciences, 3 (4). pp. 597-603. ISSN 1941-7020 (Print); 1941-7039 (Electronic)

Mohammed Ahmed, Omar Babiker Elhaj (2010) Comparison of continuous dynamics probing with the standard penetration test for highly weathered limestone of eastern Sudan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Anuar, Norzana and Jaffar Sidek, Faridah (2010) The use of perforated pile beakwaters to attenuate waves. Malaysian Journal of Civil Engineering, 22 (1). pp. 152-170. ISSN 152-170

Mohd. Hashim, Mohd. Hisbany (2010) Durability and performance of carbon fibre reinforced polymer-concrete bonding system under tropical climates. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Mohd. Nasir, Kamarul Azlan (2010) Development soil parameters for hydrologic modelling in upper Sungai Muar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noor, Mohd. Nasir (2010) Challenges in coordination process for tall building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Sofi , Nursyazwani (2010) Critical competencies for effective services in private finance initiativ e (PFI). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Movassaghi, Mohammad (2010) A study on rock throw phenomena in boulder controlled blasting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mu'azu, Mohammed Abdullahi and Ali, Nazri and Ahmed, Kamarudin (2010) Rainfall evaluation of root water uptake induced deformation. ARPN Journal of Engineering and Applied Sciences, 5 (8). pp. 32-41. ISSN 1819-6608

Muda, Khalida (2010) Facultative anaerobic granular sludge for textile dyeing wastewater treatment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil engineering.

Muda, Khalida and Aris, Azmi and Salim, Mohd. Razman and Ibrahim, Zaharah and Yahya, Adibah and Loosdrecht, Mark C.M. van and Ahmad, Azlan and Nawahwi, Mohd. Zaini (2010) Development of granular sludge for textile wastewater treatment. Water Research, 44 (15). 4341 - 4350. ISSN 0043-1354

Muniandy, Gopinath (2010) Forensic engineering testing techniques for structural assesment : a case study on pre-stressed reinforced concrete bridge at Klang Valley. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musa, Fazilah (2010) Factors associated with communication performance in JKR. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musa, Sabariah and Zakaria, Nor Azazi and Sai, Hin Lai and Tjahjanto, Dwi (2010) The drainage exchange of stormwater potential in flat area problems. Journal of Environmental Science and Engineering, 4 (10). pp. 1-8. ISSN 1934-8932

Musta, Baba and Kassim, Khairul Anuar and Rajeev Kumar, Prasannan Pillai (2010) Effect of lime on stabilization of mining waste from Sabah, Malaysia. Malaysian Journal of Civil Engineering, 22 (2). pp. 202-216. ISSN 1823-7843

Muyideen Oladimeji, Abdulkareem (2010) Relationship between outrigger position and external columns size in minimizing building response to wind. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

N

Najafabadi, Sayed Hossein Mousavian (2010) Experimental study of reinforced concrete columns with embedded pipe. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nawawi , Amir Azmi (2010) Time compression using fast track approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nezhad Khalil Abad, Seyed Vahid Alavi (2010) Assessment on blasting-induced rock slope instability at Bandar Seri Alam, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngadimin , Noor Wahyu (2010) Factors influencing to the selection of sewage treatment plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Niaraki, Seyed Ali Mousavi (2010) Six sigma approach to real time cast in-situ slab concreting process improvement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nik Azizan, Nik Zainab (2010) Building performance with different bedrock response spectrum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Niroumand, Hamed and Kassim, Khairul Anuar (2010) Analytical and numerical study of horizontal anchor plates in cohesionless soils. Electronic Journal of Geotechnical Engineering, 15 C . 1 - 12. ISSN 1089-3032

Niroumand, Hamed and Kassim, Khairul Anuar (2010) Comparison of compressive strength in mud bricks with shred tires and concrete particles as sustainable materials. Electronic Journal of Geotechnical Engineering (EJGE), 15 . pp. 1151-1158.

Niroumand, Hamed (2010) Performance of horizontal soil hook system in sand. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noor, Norhazilan Md. and Yahaya, Nordin and Nor Ozman, Nor Apaziah and Othman, S. R. (2010) The forecasting residual life of corroding pipeline based on semi-probabilistic method. UNIMAS e- Journal Civil , 1 (2). pp. 1-6. ISSN 1985-3874

Noordin, Joomizan (2010) Reservoir storage simulation and forecasting models for muda irrigation scheme, Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nourbakhsh, Mehdi (2010) Mobile application prototype for on-site information management in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nuid, Maria (2010) Structural behaviour of a single tendon end block. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nyomek, Lydia (2010) The integration of quality management system in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

O

Omar, Siti Rahmah (2010) Plants volume as a factor affecting outdoor ambient air and thermal condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Mohamad Farijal (2010) Establishing the norm of organisational structure for public works department. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

P

Pakshir, Amir Hossein (2010) Comparative assessment of road network trip distribution using growth factor and gravity modeling techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paringga, Lanang Ardi (2010) Construction safety in Jakarta, Indonesia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Parniani , Sasan (2010) Strength properties of high volume slag cement concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Patrick , Albert Vivian Thomas (2010) Interface shear stress distrubution of composite slab for partial interaction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Paydar, Ali (2010) Assessment of multi-timed urban road network under cluster condition. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pesaran Behbahani, Hamid (2010) Flexural behavior of steel fiber reinforced concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pourmohammadi, Samaneh (2010) Slope stability analyze during rapid drawdown in earth dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

R

Rafique Bhutta, Muhammad Aamer (2010) Effects of polymer-cement ratio and accelerated curing on flexural behavior of hardener-free epoxy-modified mortar panels. Materials and Structures, 43 (3). 429 -439. ISSN 1359-5997

Rafique Bhutta, Muhammad Aamer and Ohama, Yoshihiko (2010) Recent status of research and development of concrete-polymer composites in Japan. Concrete Research Letters, 1 (4). pp. 125-130. ISSN 2180-1371

Rajappan, Rajakumaran (2010) Structural assessment and conditional monitoring of light rail transit (LRT) line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ramli, Mohamad Ali (2010) Application of six sigma philosophy for quality management system in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rijal , Zuraida Zaini (2010) Productivity rate of roof works for JKR school project scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rizal Yahya, Mohd. Syah (2010) Assessment of the potential benefits of four-dimensional planning and scheduling software in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

S

Sadi , Mohammadali Kazerooni (2010) Practical guide for demolishing reinforced concrete chimney. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sahul Hameed , Mohd. Anwar (2010) Performance of porous asphalt using steel slag as aggregate replacement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Said, Suzana (2010) The shape grammar of traditional Malay houses. PhD thesis, Universiti Teknologi Malaysia, Faculty of Built Environment.

Sajoudi, Masoud Navazandeh (2010) Evaluation of construction equipment acquisition methods in Malayisan construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salahuddin, Siti Nur Hafizeanie (2010) Factors influence construction time performance for IBS in Malaysia Construction Industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saleh, Abd. Latif and Yusuf, A. (2010) Flexural strengthening of timber beams using glass fibre reinforced polymer. Electronic Journal of Structural Engineering, 10 . 45 -56. ISSN 1443-9255

Salih, Asmaa Gheyath (2010) Effective shear strength parameters of remoulded residual soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salim, Mohd. Razman and Aris, Azmi and Al-Amri, Abdullah (2010) The effect of different temperatures and fluxes on the performance of membrane bioreactor treating synthetic-municipal wastewater. Desalination, 259 (13). 111 - 119. ISSN 0011-9164

Samsuddin Sah, Samera (2010) Assessment of water quality conditions during base and strom flow events in Sungai Perak Basin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sapri, Nurzihan (2010) Selective removal of heavy metal from electroplating industrial wastewater using ion exchange process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sari , Nadra Mutiara (2010) Pedestrian delay at zebra crossing facility. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shah Ali Charlie, Liza (2010) Assessment of water quality characteristics during base and storm flow events on Sungai Langat Basin. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahperi, Rafidah (2010) Prediction on water quality of point source pollution for Lunchoo River, Johor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shamsudin, Supiah and Aris, Azmi and Dan’azumi, Salisu (2010) Modeling the distribution of rainfall intensity using hourly data. American Journal of Environmental Sciences, 6 (3). 238 - 243. ISSN 1553-345X

Shamsudin, Supiah and Dan'azumi, Salisu and Aris, Azmi (2010) Effect of storm separation time on rainfall characteristic - a case study of Johor Malaysia. European Journal of Scientific Research, 45 (2). pp. 162-167. ISSN 1450-216X

Shamsudin, Supiah and Dan’azumi, Salisu and Aris, Azmi (2010) Effect of storm separation time on rainfall characteristics - a case study of Johor, Malaysia. European Journal of Scientific Research, 45 (2). pp. 162-167. ISSN 1450-202X

Shoib, Shamsul Anuar (2010) Evaluation of pile capacity from cone penetration test data. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shoushtari, Abdollah Vaez (2010) Seismic behavior of tall building structures by friction damper. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shuib , Shazri (2010) User perspective on existing green building index (GBI) assessment criteria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Siajam, Shahrul Nizam (2010) The organizational structure and human resource norms for JKR district office with projects below RM10 million. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sk. Abd. Razak, Sk. Muiz (2010) Blast resistance of tall buildings structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Somasundaram, Vijayakumar (2010) Behaviour of laterally loaded bored pile in reclaimed land. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Soon, Tan Kian (2010) Dispute resolution in relation to delay of construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Anita (2010) Institutionalize partnering in project management for successful project delivery. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Khairunnizam (2010) Strategies for managing delay in Mara's building construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

T

Taib, Tahrina (2010) Efficiency in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tajabadi, Morteza Ghaempanah (2010) The awareness towards green office facilities. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Swee Kok (2010) Cost effectiveness comparison of pre-fabrication with conventional construction method for RMAF ground defense bunker. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan , Chuan Keat (2010) Microstructure and mineralogical study of organic soils. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tengku Azmi, Tengku Sharifah Marliza and Mohd. Yusoff, Abdull Rahim and Abdul Karim, K. J. (2010) Determination of Vanadium(IV) and Vanadium(V) in benfield samples by IEC with conductivity detection. Chromatographia, 72 (1). 141 - 144. ISSN 0009-5893 (Print) , 1612-1112 (Online)

Tiong, Kenny Ping Chiet (2010) Geochemistry characterization of organic soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

U

Ujang, Zaini and Salim, Mohd. Razman and Ollson, Gustaf and Damayanti, Alia and Sulaiman, A. Z. (2010) Respirometric analysis of activated sludge models from palm oil mill effluent. Bioresource Technology, 1 (1). 144 - 149. ISSN 0960-8524

Ujang, Zaini and Salmiati, Salmiati and Salim, Mohd. Razman (2010) Microbial biopolimerization production from Palm Oil Mill Effluent (POME). In: Biopolymer. Croatia, Sciyo, pp. 473-494. ISBN 978-953-307-109-1

V

Vikneswaran, M. and Mohd. Said, Mohd. Ismid and Zakaria, Rozana (2010) Adaptation of sustainable neighbourhood elements in neighbourhood planning and design. Malaysian Journal of Civil Engineering, 22 (1). pp. 171-185. ISSN 1823-7843

W

Wan Abdul Ghani , Wan Norhayati (2010) Improvement of project planning process to satisfy clientsÆ satisfaction in project implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Jusoh, Wan Hidayatul Hak (2010) Column design with semi-rigid end frame. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Yusoff, Wan Ibrahim (2010) Reappraisal of JKR quality management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Chin Liang (2010) The efficiency and effectiveness of building maintenance for College Tun Hussein Onn (KTHO), Universiti Teknologi Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Kah Leong (2010) Structural behaviour of pre-fabricated composite pad footing foundation using cold-formed steel lipped channel sections. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Y

Yaacob, Mohamad Hadzri and Mohd. Yusoff, Abdull Rahim and Ahamad, Rahmalan (2010) Cyclic voltammetric study of aflatoxin G1 at the mercury electrode. Malaysian Journal of Chemistry, 12 (1). pp. 9-14. ISSN 1511-2292

Yong, Cheryl Yie Wah (2010) Performance of upflow anaerobic sludge blanket (UASB) reactor using anaerobic granular sludge for bioconversion of leachate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Z

Zadeh, Mostafa Ghadak (2010) Risk management implementation in the iranian construction industry from contractors' perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zahar, Zulfadli (2010) Assessment of low cost road pavements (with stone subbase) permeability and rutting. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zaharudin, Noor Sabrina (2010) A comparison of modal flexibility method and modal curvature method in structural damage detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zaidi, Nur Syamimi (2010) Kelestarian alam sekitar : penilaian kualiti air di kampus. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zaini Sooria, Shaerliza and Sawada, Sumio and Adnan, Azlan and Goto, Hiroyuki (2010) An investigation of the attenuation characteristics of distant ground motions in Peninsular Malaysia by comparing Values of recorded with estimated PGA and PGV. Malaysian Journal of Civil Engineering, 2 (1). pp. 38-52. ISSN 1823-7843

Zainol, Mohd. Azry Hazwan (2010) Extraction of polyhdroxyalkanoates (PHA) from anaerobic pond under aerobic feast-famine regime. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainul Amri, Haidar Akma (2010) Failures of roof structures caused by wind uplift forces. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Nurhafizah (2010) Urban wastewater design towards effectiveness management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zukri, Azhani (2010) Comparison between predicted and observed compressibility characteristics of treated soil using precompression and vertical drain. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

This list was generated on Fri Mar 29 08:22:04 2024 +08.