Items where Year is 2022

Djabir Abdoulaye, Djabir and Azian, Hariri and Mat, Mohamad Nur Hidayat and Md., Hasanuzzaman (2022) Thermal comfort of indoor open spaces at university library in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 94 (2). pp. 142-165. ISSN 2289-7879

Opia, Anthony Chukwunonso (2022) Tribological performance enhancement of rapeseed biolubricant using modified eichhornia crassipes nanoparticles additive. PhD thesis, Universiti Teknologi Malaysia.

Kaynak, Y. (2022) The effect of cooling on machining and phase transformation responses of Ni-rich NiTiHf high-temperature shape memory alloy. Journal of Manufacturing Processes, 75 (n/a). pp. 1144-1152. ISSN 1526-6125

Aiman, Y. and Syahrullail, S. (2022) Frictional and material deformation of aluminium alloy in cold forging test under different derivatives of palm oil lubrication condition. Vol.:(0123456789)1 3Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44 (396). pp. 1-15. ISSN 1678-5878

Ab Talib, Mat Hussin and Muhammad Afandi, Mohd. Ariff Durranie and Mat Darus, Intan Zaurah and Mohd Yatim, Hanim and Asus, Zainab and Mohd Yamin, Ahmad Hafizal and Hadi, Muhamad Sukri (2022) Magnetorheological damper control for semi-active suspension system using skyhook-differential evolution. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 - 6 August 2020, Gambang, Malaysia.

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Yatim, Hanim and Hadi, Muhamad Sukri and Mohd. Saufi, Mohd. Syahril Ramadhan and Ngadiman, Nor Hasrul Akhmal (2022) Gain scaling tuning of fuzzy logic Sugeno controller type for ride comfort suspension system using firefly algorithm. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021, Gambang, Kuantan, Pahang.

Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Yatim, Hanim and Hadi, Muhamad Sukri and Mohd. Saufi, Mohd. Syahril Ramadhan and Ngadiman, Nor Hasrul Akhmal (2022) Gain scaling tuning of fuzzy logic Sugeno controller type for ride comfort suspension system using firefly algorithm. In: Enabling Industry 4.0 through Advances in Mechatronics Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Electrical Engineering, 900 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 335-344. ISBN 978-981192094-3

Ab. Talib, Mat Hussin and Muhammad Afandi, Mohd. Ariff Durranie and Mat Darus, Intan Zaurah and Mohd. Yatim, Hanim and Asus, Zainab and Mohd. Yamin, Ahmad Hafizal and Hadi, Muhamad Sukri (2022) Magnetorheological damper control for semi-active suspension system using skyhook-differential evolution. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 161-171. ISBN 978-981334596-6

Abd. Halim, Zulhelmi Alif and Ahmad, Norhayati and M. Yajid, M. Azizi and Hamdan, Halimaton (2022) Thermal insulation performance of silicone rubber / silica aerogel composite. Materials Chemistry and Physics, 276 (NA). pp. 1-11. ISSN 0254-0584

Abd. Raof, Aizat Ikmal and Hadi, Muhamad Sukri and Jamal, Annisa and Mohd. Yatim, Hanim and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Intelligent PID controller tuned by bacterial foraging optimization algorithm for vibration suppression of horizontal flexible structure. In: 8th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2022, 27 September 2022 - 28 September 2022, Malacca, Malaysia.

Abdul Halim, Zulhelmi Alif and Awang, Nuha and Mat Yajid, Muhamad Azizi and Ahmad, Norhayati and Hamdan, Halimaton (2022) A comparison between the effects of hydrophobic and hydrophilic silica aerogel fillers on tensile and thermal properties of unsaturated polyester composites. Polymer Bulletin, 79 (8). pp. 6173-6191. ISSN 0170-0839

Abdul Hannan, Mohammed and Lim, Vincent Zheng Dao and Ahmed, Yaseen Adnan (2022) Hydrogen production from water electrolysis current practice VS sustainable alternatives. ASEAN Engineering Journal, 12 (3). pp. 129-136. ISSN 2586-9159

Abdul Kadir, Muhammad Rashidi and Paul, Mugabe Jean and Kori, Mohamad Ikhwan and Osman, Kahar and Abdul Rahim, Aizai Azan and Md. Khudzari, Ahmad Zahran (2022) Numerical study on the effect of miniaturized impeller diameter on mechanical performance in a left ventricular assist device. Journal of Advanced Research in Applied Sciences and Engineering Technology, 28 (2). pp. 26-33. ISSN 2462-1943

Abdul Majid, Nurulhasnan and Abu Hanapah, Aqil Asnawi and Saad, Mohd. Rashdan and Mohd. Faizal, Hasan and Che Idris, Azam and Hosseini, Seyed Ehsan and Koten, Hasan and Abdul Rahman, Mohd. Rosdzimin (2022) Non-premixed liquid fuel air flame in a miniature combustor with modified flow aerodynamics. Smart Science, 10 (4). pp. 294-300. ISSN 2308-0477

Abdul Malek, Maziazaman and Ahmad, Adnan and Misnan, Mohd. Saidin (2022) Sustainable of quality control for delivery competency based training (Cbt) in Accredited Tvet Skills Training Centers. Journal Of Positive School Psychology, 6 (3). pp. 2056-2068. ISSN 2717-7564

Abdul Rahim, Muhamad Najih and Awg Hamid, Dayang Tiawa and Muhamad Said, Mohd. Farid and Jamaludin, Mohd. Najeb and Rozalan, Hanif Hafizin (2022) Design and development of remotely operated vehicle to assess the water quality in aquaculture area. Asian People Journal (APJ), 5 (2). pp. 50-60. ISSN 2600-8971

Abdul Rahman, Ismail and Azis, Noorul Azreen and Mahmood, Salwa and Mohd. Rohani, Jafri and Zaidi, Nor Amira Farhana and Mohd. Sukri, Suhaimi and Mohd. Zain, Mohd. Arif Afzan (2022) Development of a survey instrument for measuring workers satisfaction on usability of manual handling equipments at the warehouse: a pilot study. In: Human Engineering Symposium, HUMENS 2021, 22 February 2021, Virtual, Online.

Abdul Rahman, Ismail and Azis, Noorul Azreen and Mahmood, Salwa and Mohd. Rohani, Jafri and Zaidi, Nor Amira Farhana and Mohd. Sukri, Suhaimi and Mohd. Zain, Mohd. Arif Afzan (2022) Development of a survey instrument for measuring workers satisfaction on usability of manual handling equipments at the warehouse: a pilot study. In: Human-Centered Technology for a Better Tomorrow Proceedings of HUMENS 2021. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 583-592. ISBN 978-981164114-5

Abdul Wahab, Abdul Hadi and Mohamad Azmi, Nor Aqilah and Abdul Kadir, Mohammed Rafiq and Md. Saad, Amir Putra (2022) Effects of conform, non-conform, and hybrid conformity toward stress distribution at the glenoid implant and cement: A finite element study. International Journal of Artificial Organs, 45 (2). pp. 200-206. ISSN 0391-3988

Abdulghani, Zidan and Mat Darus, Intan Z. and Jamali, Annisa (2022) Intelligent model for endpoint accelerations of two link flexible manipulator using a deep learning neural network. In: 8th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2022, 27 September 2022 - 28 September 2022, Malacca, Malaysia.

Abdulrahman, Mohammed Bashir and Abdul Wahid, Mazlan and Kasani, Adam and Asmayou, Ali Houssein and Mohd. Yasin, Mohd. Fairus and Rahman, Md. Mizanur and Ghazali, Ahmad Dairobi (2022) Configuration effects of liquid fuel flameless combustion characteristics in a forward flow laboratory-scale furnace. Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 44 (4). pp. 9620-9632. ISSN 1556-7036

Abdulshaheed, Areej G. and Hussein, Mohamed and Mat Dzahir, Mohd. Azuwan and Mad Saad, Shaharil (2022) Modeling and analyzing of traveling wave gait of modular snake robot. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 - 6 August 2020, Gambang, Pahang, Malaysia.

Abdulshaheed, Areej G. and Hussein, Mohamed and Mat Dzahir, Mohd. Azuwan and Mad Saad, Shaharil (2022) Modeling and analyzing of traveling wave gait of modular snake robot. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, 141 - 152. ISBN 978-981334596-6

Abu Bakar, Amirul Ibrahim and Abas, Mohd. Azman and Muhamad Said, Mohd. Farid and Tengku Azhar, Tengku Azrul (2022) Synthesis of autonomous vehicle guideline for public road-testing sustainability. Sustainability, 14 (3). pp. 1-18. ISSN 2071-1050

Abu Hassan, Nur Hudawiyah and Zin, Nur Aleysha and Shaari, Nor Hidayah and Fadil, Nor Akmal and Jami, Mohammed Saedi and Nordin, Norhuda Hidayah (2022) Characterizations of high entropy alloy powder as catalyst synthesized by mechanical alloying for Azo dye degradation. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18 August 2021 - 19 August 2021, Virtual, Online.

Abu Hassan, Shukur and Binoj, J. S. and Goh, Kheng Lim and Mansingh, B. Brailson and Varaprasad, K. C. and Yahya, Mohd. Yazid and Che Othman, Faten Ermala and Ahmed, Usaid and Nurhadiyanto, Didik and Mujiyono, Mujiyono and Wulandari, A. P. (2022) Effect of fiber stacking sequence and orientation on quasi- static indentation properties of sustainable hybrid carbon/ramie fiber epoxy composites. Current Research in Green and Sustainable Chemistry, 5 . pp. 1-10. ISSN 2666-0865

Abu Kasim, Mohd. Zul Helmie and Mohd. Taib, Mohd. Firdaus (2022) Ergonomics evaluation for turning machinists in oil and gas industry. International Journal of Integrated Engineering, 14 (2). pp. 55-61. ISSN 2229-838X

Abu Samah, Muhammad Farith Nazreen and Hadi, Muhamad Sukri and Abdul Wahab, Abdul Malek and Mohd. Mokhtar, Nadzirah and Mat Darus, Intan Zaurah (2022) PID controller based on bird mating optimizer for vibration cancellation of horizontal flexible plate. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021, Gambang, Pahang, Malaysia.

Abu Samah, Muhammad Farith Nazreen and Hadi, Muhamad Sukri and Abdul Wahab, Abdul Malek and Mohd. Mokhtar, Nadzirah and Mat Darus, Intan Zaurah (2022) PID controller based on bird mating optimizer for vibration cancellation of horizontal flexible plate. In: Enabling Industry 4.0 through Advances in Mechatronics Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Electrical Engineering, 900 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 169-180. ISBN 978-981192094-3

Adam, Anbia and Sam, Toong Hai and Latif, Kamran and Yusof, Yusri and Khan, Zohaib and Memon, Danish Ali and Saif, Yazid and Noor Hatem, Noor Hatem and Ahmed, Maznah lliyas and Abdul Kadir, Aini Zuhra (2022) Review on advanced CNC controller for manufacturing in Industry 4.0. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021 - 20 September 2021, Virtual, Online.

Adam, Anbia and Sam, Toong Hai and Latif, Kamran and Yusof, Yusri and Khan, Zohaib and Memon, Danish Ali and Saif, Yazid and Noor Hatem, Noor Hatem and lliyas Ahmed, Maznah and Abdul Kadir, Aini Zuhra (2022) Review on advanced CNC controller for manufacturing in Industry 4.0. In: Enabling Industry 4.0 through Advances in Manufacturing and Materials Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 261-269. ISBN 978-981192889-5

Adam, Anbia and Yusof, Yusri and Latif, Kamran and Abdul Kadir, Aini Zuhra and Sam, Toong Hai and Iliyas Ahmad, Maznah (2022) Development of a novel open platform controller machining module for 3-Axis CNC milling machine. In: 12th National Technical Seminar on Unmanned System Technology, NUSYS 2020, 24 November 2020 - 25 November 2020, Virtual, Online.

Adam, Anbia and Yusof, Yusri and Latif, Kamran and Abdul Kadir, Aini Zuhra and Sam, Toong Hai and Iliyas Ahmad, Maznah (2022) Development of a novel open platform controller machining module for 3-Axis CNC milling machine. In: Proceedings of the 12th National Technical Seminar on Unmanned System Technology 2020 NUSYS’20. Lecture Notes in Electrical Engineering, 770 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 839-851. ISBN 978-981162405-6

Adam, Anbia and Yusof, Yusri and Latif, Kamran and Abdul Kadir, Aini Zuhra and Sam, Toong Hai and Nazrein, Shamy and Memon, Danish Ali (2022) The implementation of a novel Augmented Reality (AR) based mobile application on open platform controller for CNC machining operation. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020, Gambang, Pahang, Malaysia.

Adam, Anbia and Yusof, Yusri and Latif, Kamran and Abdul Kadir, Aini Zuhra and Sam, Toong Hai and Nazrein, Shamy and Memon, Danish Ali (2022) The implementation of a novel Augmented Reality (AR) based mobile application on open platform controller for CNC machining operation. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 227-234. ISBN 978-981334596-6

Adhi, P. M. and Rahman, H. and Nuriskasari, I. and Syamsudin, Syamsudin and Syahrom, A. (2022) A simple and low-cost photocatalytic air purification test method. In: 9th Asian Physics Symposium 2021, APS 2021, 5 October 2021 - 6 October 2021, Virtual, Online.

Ahmad, Iftikhar and Lim, Meng Hee and Abdelrhman, Ahmed M. and Imam, Syed Asad and Leong, M. S. (2022) Hybrid vibro-acoustic energy harvesting using electromagnetic transduction for autonomous condition monitoring system. Energy Conversion and Management, 258 (NA). pp. 1-11. ISSN 0196-8904

Ahmad Israr, Haris and Wong, King Jye and Koloor, Seyed Saeid Rahimian (2022) Experimental investigation of the axial crushing response of flax/glass eco-hybrid self-supporting web composites. Fibers, 10 (9). pp. 1-12. ISSN 2079-6439

Ahmad Zaharuddin, Mohd. Faridh and Sharif, Safian and Hasnol, Muhammed Zakariya and Sehun Rhee, Sehun Rhee (2022) Taguchi optimisation on effect of water environment in joining dissimilar al5083 and al6061-t6 aluminium alloy using friction stir welding. Jurnal Mekanikal, 45 . pp. 39-52. ISSN 2289-3873

Ahmed, Shoaib and ur Rahman, Rana Atta and Awan, Awais and Ahmad, Sajjad and Akram, Waseem and Amjad, Muhammad and Rahimian Koloor, Seyed Saeid (2022) Optimization of process parameters in friction stir welding of aluminum 5451 in marine applications. Journal of Marine Science and Engineering, 10 (10). pp. 1-13. ISSN 2077-1312

Ahmed Shakil, Usaid and Abu Hassan, Shukur and Yahya, Mohd Yazid and Mat Rejab, Mohd. Ruzaimi (2022) A focused review of short electrospun nanofiber preparation techniques for composite reinforcement. Nanotechnology Reviews, 11 (1). pp. 1991-2014. ISSN 2191-9089

Ahmed Shakil, Usaid and Nauman, Saad and Abu Hassan, Shukur and Yahya, Mohd. Yazid and Rushdan, Ahmad Ilyas and Che Othman, Faten Ermala and Binoj, Joseph Selvi and Yusof, Norhaniza (2022) Mechanical, microstructural, and dynamic mechanical properties of electrospun short nanofiber reinforced epoxy composites. Polymer Composites, 43 (10). pp. 7028-7043. ISSN 0272-8397

Aiman, Y. and Syahrullail, S. and Afify, S. and Faizal, H. M. and Yahya, W. J. (2022) Tribological performance of palm olein with additive using linear reciprocating tribotester. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah - Malaysia.

Aiman, Y. and Syahrullail, S. and Afify, S. and M. Faizal, H. and Yahya, W. J. (2022) Tribological performance of palm olein with additive using linear reciprocating tribotester. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 113-119. ISBN 978-981169948-1

Al Sakkaf, Ahmed and Szali Januddi, Fatihhi and Md. Yusop, Abdul Hakim and Hadi Nur, Hadi Nur (2022) Challenges in the use of Fe-based materials for bone scaffolds applications: perspective from in vivo biocorrosion. Materials Today Communications, 33 (NA). pp. 1-14. ISSN 2352-4928

Alawi, Omer A. and Mohamed Kamar, Haslinda and Abdelrazek, Ali Hassan and Mallah, Abdul Rahman and Mohammed, Hussein A. and Abdulla, Aziz Ibrahim and Gatea, Hamed Alwan and Khiadani, Mehdi and Newaz, Kazi Md. Salim and Yaseen, Zaher Mundher (2022) Hydrothermal and energy analysis of flat plate solar collector using copper oxide nanomaterials with different morphologies: economic performance. Sustainable Energy Technologies and Assessments, 49 (NA). pp. 1-14. ISSN 2213-1388

Alawi, Omer A. and Mohamed Kamar, Haslinda and Hussein, Omar A. and Mallah, A. R. and Mohammed, Hussein A. and Khiadani, Mehdi and Roomi, Ali B. and Kazi, S. N. and Yaseen, Zaher Mundher (2022) Effects of binary hybrid nanofluid on heat transfer and fluid flow in a triangular-corrugated channel: an experimental and numerical study. Powder Technology, 395 (NA). pp. 267-279. ISSN 0032-5910

Ali, Alamry and Abu Hassan, Shukur and BaQais, Amal and Binoj, J. S. (2022) A study on the application of solar cells sensitized with a blackberry-based natural dye for power generation. Journal of Nanomaterials, 2022 . pp. 1-10. ISSN 1687-4110

Ali, Muh. Ichsan and Idkhan, A. Muh. and Kamin, Yusri and Hasim, Abdul Hafid (2022) Implementation of maximum likelihood estimation (MLE) in the assessment of pro-environmental tools measurement models for engineering students. International Journal on Advanced Science, Engineering and Information Technology, 12 (4). pp. 1632-1638. ISSN 2088-5334

Alvarez, Regueiro and Yang, Bijie and Barrera, Medrano Esperanza and Martinez-Botas, Ricardo and Rajoo, Srithar (2022) Optimization of an organic ranking cycle radial turbine using a reduced-order mode coupled with computational fluid dynamics. Journal of Engineering for Gas Turbines and Power Transactions of ASME, 144 (10). pp. 1-10. ISSN 0742-4795

Ammarullah, Muhammad Imam and Afif, Ilham Yustar and Maula, Mohamad Izzur and Winarni, Tri Indah and Tauviqirrahman, Mohammad and Bayuseno, Athanasius Priharyoto and Basri, Hasan and Syahrom, Ardiyansyah and Md Saad, Amir Putra and Jamari, Jamari (2022) Deformation analysis of CoCrMo-on-CoCrMo hip implant based on body mass index using 2D finite element procedure. In: 1st International Conference Advanced in Applied Mathematics, ICAAM 2021, 30 March 2021 - 31 March 2021, Virtual, Online.

Ammarullah, Muhammad Imam and Afif, Ilham Yustar and Mohamad Izzur Maula, Mohamad Izzur Maula and Tri Indah Winarni, Tri Indah Winarni and Mohammad Tauviqirrahman, Mohammad Tauviqirrahman and Athanasius Priharyoto Bayuseno, Athanasius Priharyoto Bayuseno and Basri, Hasan and Syahrom, Ardiyansyah and Md. Saad, Amir Putra and Jamari, Jamari (2022) Wear analysis of acetabular cup on metal-on-metal total hip arthroplasty with dimple addition using finite element method. In: 2021 International Conference on Science and Applied Science, ICSAS 20216, 6 April 2021, Surakarta, Virtual.

Aqidawati, Era Febriana and Sutopo, Wahyudi and Pujiyanto, Eko and Hisjam, Muhammad and Fahma, Fakhrina and Ma’aram, Azanizawati (2022) Technology readiness and economic benefits of swappable battery standard: its implication for open innovation. Journal of Open Innovation: Technology, Market, and Complexity, 8 (2). pp. 1-41. ISSN 2199-8531

Ariff, I. M. and Ahmad, Z. and Sung, A. N. and Johar, M. and Tamin, M. N. (2022) Mechanical characterization of aluminum 7075 using digital image correlation and finite element method. In: International Conference of Industrial, Mechanical and Electrical Engineering, ICIMEE 2021, 7 December 2021, Virtual, Online.

Arifin, Nurulhuda and Sudin, Izman and Ngadiman, Nor Hasrul Akhmal and Ashrul Ishak, Mohamad Shaiful (2022) A comprehensive review of biopolymer fabrication in additive manufacturing processing for 3D-tissue-engineering scaffolds. Polymers, 14 (10). pp. 1-22. ISSN 2073-4360

Asasaari, S. F. M. and Fadil, N. A. and Tamin, M. N. (2022) Mechanics of solder/IMC interface of lead-free solder interconnects in ball grid array assembly. Journal of Mechanical Engineering and Sciences, 16 (1). pp. 8718-8729. ISSN 2289-4659

Aslani, Zahra and Nazemi, N. and Rajabi, Negar and Kharaziha, Mahshid and Bakhsheshi Rad, Hamid Reza and Kasiri Asgarani, M. and Najafinezhad, Aliakbar and Ismail, Ahamd Fauzi and Shari, S. and Berto, Filippo (2022) Antibacterial activity and cell responses of vancomycin-loaded alginate coating on ZSM-5 Scaffold for bone tissue engineering applications. Materials, 15 (14). pp. 1-18. ISSN 1996-1944

Asyraf, M. R. M. and Rafidah, M. and Ebadi, S. and Azrina, A. and Razman, M. R. (2022) Mechanical properties of sugar palm lignocellulosic fibre reinforced polymer composites: a review. Cellulose, 29 (12). pp. 6493-6516. ISSN 0969-0239

Awang Amirudin, Awang Azhad and Kamarumtham, Khairul Izzati and Haripriyono, Aditya Agung and Yunus, Azrul Aminur Rahman and Suheimy, Nur Amirah Syahmina and Ahmed, Yaseen Adnan (2022) A review of the dynamic analysis of axial vibrations in marine propulsion shafting system due to propeller excitation. ASEAN Engineering Journal, 12 (2). pp. 19-27. ISSN 2586-9159

Azman, Zulkifli and Nayan, Nafarizal and Megat Hasnan, Megat Muhammad Ikhsan and Abu Bakar, Ahmad Shuhaimi and Mamat, Mohamad Hafiz and Mohd. Yusop, Mohd. Zamri (2022) Impedance spectroscopy analysis of Al/100-plane AlN/p-Si MIS prepared by HiPIMS method for tailoring dielectric properties. International Journal of Nanotechnology, 19 (2-5). 404 -417. ISSN 1475-7435

Azmi, M. H. and Hasnol, M. Z. and Zaharuddin, M. F. A. and Sharif, S. and Rhee, S. (2022) Effect of tool pin profile on friction stir welding of dissimilar materials AA5083 and AA7075 aluminium alloy. Archives of Metallurgy and Materials, 67 (2). pp. 465-470. ISSN 1733-3490

Azmi, Nur Syuhada and Hasim, Norhaziqah and Mat Yajid, Muhammad Azizi and Engku Abu Bakar, Engku Mohammad Nazim and Nosbi, Norlin and Rejab, Nik Akmar and Wan Ali, Wan Fahmin Faiz (2022) pH effect on microbial corrosion by pseudomonas aeruginosa sp. On galvanized JIS3502 steel. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18 August 2021 - 19 August 2021, Virtual, Online.

Baba, N. Bahiyah and Ghazali, A. S. and Abdul Rahman, A. H. and Sharif, S. (2022) Effect of heat treatment on microhardness of electroless Ni-YSZ cermet coating. Journal of Achievements in Materials and Manufacturing Engineering, 113 (1). pp. 5-12. ISSN 1734-8412

Baba, N. Bahiyah and Ghazali, A. S. and S. N., Azine and A. H., Abdul Rahman and Sharif, S. (2022) Effect of particle size on surface roughness and morphology of heat-treated electroless Ni-YSZ coating. Journal of Achievements in Materials and Manufacturing Engineering, 114 (1). pp. 5-14. ISSN 1734-8412

Baba, Nor Bahiyah and Ghazali, Amirul Syazwan and Abdul Rahman, Afifah Humaira and Said, Nor Azinee and Sharif, Safian (2022) Influence of heat treatment on microhardness and surface roughness of electroless Ni-YSZ composite coating. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (1). pp. 114-122. ISSN 2289-7879

Baseri, Hazeem Hakeemi and Mohd. Yatim, Hanim and Hadi, Muhamad Sukri and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Firefly algorithm for modeling of flexible manipulator system. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020, Gambang, Kuantan, Pahang.

Baseri, Hazeem Hakeemi and Mohd. Yatim, Hanim and Hadi, Muhamad Sukri and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Firefly algorithm for modeling of flexible manipulator system. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 235-251. ISBN 978-981334596-6

Binoj, J. S. and Abu Hassan, Shukur and Khan, Reefat Arefin and Ali, Alamry (2022) Applications of mobile information processor edge-over-edge molecular wires with high-performance thermoelectric generators. Journal of Nanomaterials, 2022 . pp. 1-4. ISSN 1687-4110

Buglie, William L. N. and Tamrin, Khairul Fikri and Ahmed Sheikh, Nadeem and Mohd. Yasin, Mohd. Fairus and Mohamaddan, Shahrol (2022) Enhanced fluid mixing using a reversed multistage Tesla micromixer. Chemical Engineering and Technology, 45 (7). pp. 1255-1263. ISSN 0930-7516

Che Aziz, Ahmad Kifli and Samion, Syahrullail (2022) Friction properties of epoxidised natural rubber based tyre treads. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah - Malaysia.

Che Aziz, Ahmad Kifli and Samion, Syahrullail (2022) Friction properties of epoxidised natural rubber based tyre treads. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 1-9. ISBN 978-981169948-1

Che Kob, Mohd. Salman (2022) Electro-mechanical friction clutch control using proportional derivative plus conditional integral controller. PhD thesis, Universiti Teknologi Malaysia.

Chin, Desmond Daniel Vui Sheng and Ramegowda, Nagesh Saragondlu and Guna, Vijaykumar and Reddy, Narendra (2022) Groundnut shell and coir reinforced hybrid bio composites as alternative to gypsum ceiling tiles. Journal of Building Engineering, 57 (104892). pp. 1-11. ISSN 2352-7102

Chin, Hon Huin and Klemes, Jiri Jaromir and Wan Alwi, Sharifah Rafidah (2022) Industrial site water exchange network synthesis considering multiple quality constraints and water headers. Journal of Environmental Management, 312 (114890). pp. 1-14. ISSN 0301-4797

Chin, Jia Chun (2022) Effect of aeration and anode material on the bioelectricity generation of floating microalgae biophotovoltaic device. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Chin, Jia Chun and Khor, We Han and Ng, Fong Lee and Chong, William Woei Fong and Wu, Yun Ta and Kang, Hooi Siang (2022) Effects of anode materials in electricity generation of microalgal-biophotovoltaic system – part II: free-floating microalgae in aeration mode. In: 2nd International Conference on Sustainable Environmental Technology (ISET2021), 9 November 2021 - 10 November 2021, Virtual, Online.

Chin, Jia Chun and Khor, Wei Han and Chong, William Woei Fong and Wu, Yun Ta and Kang, Hooi Siang (2022) Effects of anode materials in electricity generation of microalgal-biophotovoltaic system - part I: natural biofilm from floating microalgal aggregation. In: 2nd International Conference on Sustainable Environmental Technology (ISET2021), 9 November 2021 - 10 November 2021, Virtual, Online.

Chin, Jia Chun and Khor, Wei Han and Chong, William Woei Fong and Wu, Yun Ta and Kang, Hooi Siang (2022) Effects of anode materials in electricity generation of microalgal-biophotovoltaic system - part I: natural biofilm from floating microalgal aggregation. Materials Today: Proceedings, 65 (7). pp. 2970-2978. ISSN 2214-7853

Chin, Jia Chun and Khor, Wei Han and Ng, Fong Lee and Chong, William Woei Fong and Wu, Yun Ta and Kang, Hooi Siang (2022) Effects of anode materials in electricity generation of microalgal-biophotovoltaic system – part II: free-floating microalgae in aeration mode. Materials Today: Proceedings, 65 (7). pp. 2992-2999. ISSN 2214-7853

Chiong, Meng Soon and Soon, Chun Mein and Superamaniam, Muthuramalinga Tevar and Md. Sah, Muhammad Hanafi (2022) Design of self-regulated flow control mechanism for a turbocharger gas stand test facility. Jurnal Mekanikal, 45 . pp. 63-80. ISSN 2289-3873

Chow, Zhen Pei (2022) Temperature effect on the low-velocity impact characteristics of glass laminated aluminium reinforced epoxy panels. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Chua, Ling Ling and Mat Yajid, Muhammad Azizi and Tamin, Mohd. Nasir and Kamarudin, Maslinda and Azhar Taib, Mustapha Ali and Nosbi, Norlin and Wan Ali, Wan Fahmin Faiz (2022) Effect of substrate roughness and PVD deposition temperatures on hardness and wear performance of AlCrN-coated WC-Co. Surface and Coatings Technology, 436 (NA). pp. 1-9. ISSN 0257-8972

Cupu, Dedi Rosa Putra and Osman, Kahar (2022) Numerical analysis of the effect of temperature on the pressure and film thickness for line contact elastohydrodynamic lubrication using bio-based oils as lubricants. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 92 (1). pp. 90-104. ISSN 2289-7879

Elfarouk, Omar and Wong, Kuan Yew and Wong, Wai Peng (2022) Multi-objective optimization for multi-echelon, multi-product, stochastic sustainable closed-loop supply chain. Journal of Industrial and Production Engineering, 39 (2). pp. 109-127. ISSN 2168-1015

Elhawary, Shehab Abdelmotaleb Abdelmegeed Ahmed (2022) Characterization of flame propagation and burning rates of various mixtures of biogas and nitrous oxide. PhD thesis, Universiti Teknologi Malaysia.

Elsherbeiny, Mohamed Mohamed Takeyeldein (2022) Diffuser augmented wind turbine for low-speed wind. PhD thesis, Universiti Teknologi Malaysia.

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Yakideh, Keikhosro and Ngadiman, NorHasrul Akhmal (2022) An eco-environmental efficiency analysis of Malaysia sewage treatment plants: an incorporated window-based data envelopment analysis and ordinary least square regression. Environmental Science and Pollution Research, 29 (25). pp. 38285-38302. ISSN 0944-1344

Fallahiarezoudar, Ehsan and Ngadiman, Nor Hasrul Akhmal and Mohd. Yusof, Noordin and Idris, Ani and Ishak, Mohamad Shaiful Ashrul (2022) Development of 3D thermoplastic polyurethane (TPU)/Maghemite (ϒ-Fe2O3) using Ultra-Hard and Tough (UHT) bio-resin for soft tissue engineering. Polymers, 14 (13). pp. 1-12. ISSN 2073-4360

Farhanah, A. N. and Syahrullail, S. and A. Hamid, M. K. and Musa, M. N. and Zawawi, F. M. (2022) The tribofilm formation of MoS2 nanolubricant in boundary lubrication regime. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 10-17. ISBN 978-981169948-1

Farhanah, A. N. and Syahrullail, S. and Hamid, M. K. A. and Musa, M. N. and Zawawi, F. M. (2022) The tribofilm formation of MoS2 nanolubricant in boundary lubrication regime. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah - Malaysia.

Farokhi Nejad, Ali and Koloor, Seyed Saeid Rahimian and Arifin, Mohd. Luqman Hakim and Shafiei, Ali and Abu Hassan, Shukur and Yahya, Mohd. Yazid (2022) Crashworthiness assessment of carbon/glass epoxy hybrid composite tubes subjected to axial loads. Polymers, 14 (19). pp. 1-15. ISSN 2073-4360

Faysal, Atik and Keng, Ngui Wai and Lim, Meng Hee (2022) Performance evaluation of BPSO & PCA as feature reduction techniques for bearing fault diagnosis. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 - 6 August 2020, Gambang, Pahang, Malaysia.

Faysal, Atik and Keng, Ngui Wai and Lim, Meng Hee (2022) Performance evaluation of BPSO & PCA as feature reduction techniques for bearing fault diagnosis. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 605-615. ISBN 978-981334596-6

Firdaus Isham, M. and Saufi, M. S. R. and A. R., Amirul (2022) A novel hybrid extreme learning machine-whale optimization algorithm for bearing fault diagnosis. In: 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021, 23rd August 2021, Kuantan, Pahang.

Firouzi, Alireza and Mohd. Yusof, Noordin and Lee, Muhammad Hisyam and Bashiri, Robabeh (2022) Theoretical and experimental investigation of estimating change point in multivariate processes via simultaneous covariance matrix and mean vector. Jurnal Teknologi, 84 (1). pp. 85-96. ISSN 0127-9696

Gbolarumi, Fadara Taiwo and Wong, Kuan Yew (2022) Assessment of environmental performance criteria in textile industry using the Best-Worst Method. In: Proceedings of the Second International Workshop on Best-Worst Method (BWM2021), 10 - 11 June 2021, Delft, The Netherlands.

Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Idris, Mohd. Hasbullah (2022) Influence of solution heat treatment on microstructure and tensile properties of Gd-Treated Al-15% Mg-2 Si in-situ composites. Journal of Applied Science and Engineering (Taiwan), 25 (3). pp. 421-428. ISSN 2708-9967

Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Idris, Mohd. Hasbullah (2022) Influence of solution heat treatment on microstructure and tensile properties of gd-treated al-15% mg2si in-situ composites. Journal of Applied Science and Engineering, 25 (3). pp. 521-528. ISSN 2708-9967

Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Idris, Mohd. Hasbullah (2022) Microstructure development and wear behavior of Al-15% Mg2Si-xGd composites before and after hot extrusion. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah, Malaysia.

Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Idris, Mohd. Hasbullah (2022) Microstructure development and wear behavior of Al-15% Mg2Si-xGd composites before and after hot extrusion. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 103-108. ISBN 978-981169948-1

Ghandvar, Hamidreza and Jabbar, Mostafa Abbas and Bahador, Abdollah and Abu Bakar, Tuty Asma and Fadil, Nor Akmal and Kondoh, Katsuyoshi (2022) Microstructure examination and sliding wear behavior of al-15%mg2si-xgd in situ composites before and after hot extrusion. Lubricants, 10 (1). pp. 1-13. ISSN 2075-4442

Gheidan, Abdelgader A. S. and Abdul Wahid, Mazlan and Chukwunonso, Opia A. and Yasin, Mohd. Fairus (2022) Impact of internal combustion engine on energy supply and its emission reduction via sustainable fuel source. Evergreen, 9 (3). pp. 830-844. ISSN 2189-0420

Gohari,, Soheil and Mozafari, Farzin and Moslemi, Navid and Mouloodi, Saeed and Alebrahim, Reza and Ahmed, Mizan and Abdi, Behzad and Sudin, Izman and Burvill, Colin (2022) Static and dynamic deformation response of smart laminated composite plates induced by inclined piezoelectric actuators. Journal of Composite Materials, 56 (21). pp. 3269-3293. ISSN 0021-9983

Guo, Ren Mong and Liew, Chin Seng and Woei, William Fong Chong and Mohd. Nor, Siti Aminah and Ng, Jo-Han and Idris, Rubia and Chiong, Meng Choung and Lim, Jun Wei and Zakaria, Zainul Akmar and Woon, Kok Sin (2022) Environment impact and bioenergy analysis on the microwave pyrolysis of WAS from food industry: Comparison of CO2 and N2 atmosphere. Journal of Environmental Management, 319 (115665). pp. 1-10. ISSN 0301-4797

Haider, Bilal (2022) Influence of passive flow control methods on flow topology and stability deritives of muldicon wing. PhD thesis, Universiti Teknologi Malaysia.

Haider, Bilal and Mansor, Shuhaimi and Mat, Shabudin and Nasir, Nazri (2022) Flow visualisation over the low sweep unmanned combat aerial vehicle (UCAV) configuration. In: CIM 2022: The 3rd International Conference on Control, Instrumentation and Mechatronics Engineering, 30th – 31st of March2022, Virtual, Online.

Haider, Bilal and Mansor, Shuhaimi and Mat, Shabudin and Nasir, Nazri (2022) Flow visualisation over the low sweep Unmanned Combat Aerial Vehicle (UCAV) configuration. In: Control, Instrumentation and Mechatronics: Theory and Practice. Lecture Notes in Electrical Engineering, 921 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 13-21. ISBN 978-981193922-8

Haider, Bilal and Mansor, Shuhaimi and Mat, Shabudin and Nasir, Nazri (2022) Review of uncertainty of the flow over low sweep lambda wing unmanned combat air vehicles (UCAV). Journal of Aeronautics Astronautics and Aviation, 54 (1). pp. 25-48. ISSN 1990-7710

Hamid, Mohd. Norhakem (2022) Guidelines for tracheal stent costumization and implantation. PhD thesis, Universiti Teknologi Malaysia.

Hamid, Mohd. Norhakem and Osman, Kahar and Mohd. Salleh, Zuliazura and Rusli, Rima Efriani and Kori, Mohamad Ikhwan and Md. Khudzari, Ahmad Zahran (2022) Effect of airway stent on stenosed trachea. In: Human Engineering Symposium, HUMENS 2021, 22 February 2021 - 22 February 2021, Virtual, Online.

Hamid, Mohd. Norhakem and Osman, Kahar and Mohd. Salleh, Zuliazura and Rusli, Rima Efriani and Kori, Mohamad Ikhwan and Md. Khudzari, Ahmad Zahran (2022) Effect of airway stent on stenosed trachea. In: Human-Centered Technology for a Better Tomorrow Proceedings of HUMENS 2021. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 183-191. ISBN 978-981164114-5

Hamshary, F. A. S. and Latif, M .J. A. and Zakaria, M. S. and Harun, M. N. and Mahmud, J. and Nguyen, H. Q. (2022) Effect of water content on correlation of biomechanical properties and grayscale of articular cartilage using low-field MRI. International Journal of Nanoelectronics and Materials, 15 . pp. 259-269. ISSN 1985 5761

Harun, Mohd. Hanif (2022) Hybrid fractional modified skyhook controller optimized by particle swarm optimization for railway secondary lateral suspension. PhD thesis, Universiti Teknologi Malaysia.

Hasan, Mohd. Faizal and Omar, Muhammad Syaraffi and Sukiran, Mohamad Azri and Nyakuma, Bemgba Bevan and Muhamad Said, Mohd. Farid (2022) Torrefaction of fibrous empty fruit bunch under mild pressurization technique. Renewable Energy, 194 (NA). pp. 349-358. ISSN 0960-1481

Hashmi, Mudassar Hussain and Koloor, Seyed Saeid Rahimian and Abdul Hamid, Mohd. Foad and Tamin, Mohd. Nasir (2022) Fractal analysis for fatigue crack growth rate response of engineering structures with complex geometry. Fractal and Fractional, 6 (11). pp. 1-12. ISSN 2504-3110

Hashmi, Mudassar Hussain and Koloor, Seyed Saeid Rahimian and Abdul- Hamid, Mohd. Foad and Tamin, Mohd. Nasir (2022) Exploiting fractal features to determine fatigue crack growth rates of metallic materials. Engineering Fracture Mechanics, 270 (NA). pp. 1-15. ISSN 0013-7944

Hassan, Ahmed Ghazi (2022) Tribology and corrosion characteristics of carbon nanotube and polyetheretherketone/ carbon nanotube-coated porous titanium-tantalum shape memory alloys for biomedical applications. PhD thesis, Universiti Teknologi Malaysia.

Ibham Veza, Ibham Veza and Abas, Mohd. Azman and DjatiWibowo Djamari, DjatiWibowo Djamari and Tamaldin, Noreffendy and Fitri Endrasari, Fitri Endrasari and Bentang Arief Budiman, Bentang Arief Budiman and Muhammad Idris, Muhammad Idris and Opia, Anthony C. and Firman Bagja Juangsa, Firman Bagja Juangsa and Muhammad Aziz, Muhammad Aziz (2022) Electric vehicles in Malaysia and Indonesia: Opportunities and challenges. Energies, 15 (7). pp. 1-24. ISSN 1996-1073

Ibrahim, Mustafa Khaleel and Saud Al-Humairi, Safaa Najah and Hamzah, Esah and Engku Abu Bakar, Engku Mohammad Nazim (2022) In Vitro microstructure, shape memory, corrosion, and biocompatibility characteristics of porous Ti-51 at.%Ni-xSn shape memory alloys. Metallography, Microstructure, and Analysis, 11 (1). pp. 150-157. ISSN 2192-9262

Ibramsa, Rizwana Seeni and Abd. Latif, Mohd. Juzaila and Zakaria, Mohamad Shukri and Harun, Muhamad Noor and Mahmud, Jamaluddin (2022) Quantitative study of articular cartilage based on greyscale assessment using low-field MRI. International Journal on Advanced Science, Engineering and Information Technology, 12 (1). pp. 231-236. ISSN 2088-5334

Idris, Zul Fadhli and Abidin, Ummikalsom and Md. Sunhazim, Nur Shamimi Amirah (2022) Self-powered infusion micropump fabrication using xurography and thermal lamination techniques. International Journal of Integrated Engineering, 14 (2). pp. 39-46. ISSN 2229-838X

Ikhliluddin, Mohd. Izdiyad and Mohamad, Maziha and Mat Yajid, Muhammad Azizi and Engku Abu Bakar, Engku Mohammad Nazim and Wan Ali, Wan Fahmin Faiz (2022) Corrosion behavior of antimony (SB) modified galfan (ZN-AL) coated steel. Key Engineering Materials, 908 . pp. 578-584. ISSN 1662-9795

Iliyas Ahmad, Maznah and Saif, Yazid and Yusof, Yusri and Daud, Md. Elias and Latif, Kamran and Abdul Kadir, Aini Zuhra (2022) A case study: monitoring and inspection based on IoT for milling process. International Journal of Advanced Manufacturing Technology, 118 (3-4). pp. 1305-1315. ISSN 0268-3768

Isa, Amiruddin and Nosbi, Norlin and Che Ismail, Mokhtar and Md. Akil, Hazizan and Wan Ali, Wan Fahmin Faiz and Omar, Mohd. Firdaus (2022) A review on recycling of carbon fibres: methods to reinforce and expected fibre composite degradations. Materials, 15 (14). pp. 1-21. ISSN 1996-1944

Ishak, Izuan Amin and Maruai, Nurshafinaz and Mohd. Sakri, Fadhilah and Mahmudin, Rahmah and Samiran, Nor Afzanizam and Sulaiman, Syabillah and Zainal Abidin, Shaiful Fadzil and Mat Hassan, Nik Normunira (2022) Numerical analysis on the crosswind influence around a generic train moving on different bridge configurations. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (2). pp. 76-98. ISSN 2289-7879

Isham, M. Firdaus and Saufi, Mohd. Syahril Ramadhan and Amirul, A. R. (2022) A novel hybrid extreme learning machine-whale optimization algorithm for bearing fault diagnosis. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering InECCE2021, Kuantan, Pahang, Malaysia, 23rd August. Lecture Notes in Electrical Engineering, 842 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 613-624. ISBN 978-981168689-4

Ismail, Mohd. Arif and Shaharuddin, Nik Mohd. Ridzuan and Yaakob, Omar and Jamal, Mohamad Hidayat and Adnan, Faizul Amri and Mohamed Rashidi, Ahmad Hadi and Wan Mohd. Azhary, Wan Ahmad Hafiz and Samion, Mohd. Kamarul Huda and Bachok, Andiknurdiyana and Ahmad, Badruzzaman and Ahmad, Nur Shafira (2022) Wake wash of a fast small boat in restricted waters: Model tests and full-scale measurements. Brodogradnja, 73 (2). pp. 93-119. ISSN 0007-215X

Ismail, Nur Suhaili and Fadil, Nor Akmal and Abu Bakar, Tuty Asma (2022) Effect of stand-off distance on the microstructural, mechanical and physical properties of al-zn pseudo-alloy coating prepared via wire arc spray process. Malaysian Journal of Microscopy, 18 (1). pp. 256-269. ISSN 1823-7010

Ismail, Syazwan Aizat and Mohamed Kamar, Haslinda and Kamsah, Nazri and Ardani, Mohd. Ibtisham and Che Dom, Nazri and Shafie, Farah Ayuni and Zulkapri, Izwyn and Lim, Kuang Hock (2022) Indoor air quality level influence sick building syndrome among occupants in educational buildings. International Journal of Public Health Science (IJPHS), 11 (2). pp. 503-517. ISSN 2252-8806

Israr Ahmad, Haris Ahmad and Teh, Soo Chwen and Abd. Latif, Ainullotfi and Wong, King Jye and Koloor, Seyed Saeid Rahimian and Yidris, Noorfaizal and Yahya, Mohd. Yazid (2022) Preliminary structural design of coreless spoiler by topological optimization. Processes, 10 (10). pp. 1-14. ISSN 2227-9717

Jahare, Muhammad Hafiz and Idris, Mohd. Hasbullah and Hassim, Mohd. Hazwan (2022) Effect of WEDM parameters on material removal rate and kerf’s width of cobalt chromium molybdenum using full factorials design. Advances in Materials and Processing Technologies, 8 (1). pp. 550-563. ISSN 2374-068X

Jahare, Muhammad Hafiz and Idris, Mohd. Hasbullah and Wan Ali, Wan Fahmin Faiz (2022) Solid fraction effect on solidification of semisolid forging A380 alloy. Materials and Manufacturing Processes, 37 (2). pp. 230-239. ISSN 1042-6914

Jamei, Mehdi and Karbasi, Masoud and Alawi, Omer A. and Mohamed Kamar, Haslinda and Mohamed Khedher, Khaled and Abba, S. I. and Yaseen, Zaher Mundher (2022) Earth skin temperature long-term prediction using novel extended Kalman filter integrated with Artificial Intelligence models and information gain feature selection. Sustainable Computing: Informatics and Systems, 35 (NA). pp. 1-19. ISSN 2210-5379

Kadir, Norul Hidayah (2022) Hull resistance and air-injected ballast free system performance for liquified natural gas ship. PhD thesis, Universiti Teknologi Malaysia.

Kadir, Norul Hidayah and Abdul Malik, Adi Maimun and Ali, Arifah (2022) Experimental of ballast free system with air-injected pressure bubbles in reducing ship resistance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (2). pp. 160-175. ISSN 2289-7879

Kamarudin, M. and Ahmad, Z. and Sung, A. N. and Johar, M. and Tamin, M. N. (2022) Effects of different lay angles on characteristic fatigue responses of steel wire ropes. In: 2021 International Conference of Industrial, Mechanical and Electrical Engineering, ICIMEE 2021, 7 December 2021, Virtual, Online.

Kamarul Bahrain, Siti Humairah and Che Abd. Rahim, Nor Nabilah and Mahmud, Jamaluddin and Mohammed, M. N. and Ilyas, R. A. and Alkhatib, Samah Elsayed and Asyraf, M. R. M. (2022) Hyperelastic properties of bamboo cellulosic fibre-reinforced silicone rubber biocomposites via compression test. International Journal of Molecular Sciences, 23 (11). pp. 1-12. ISSN 1661-6596

Karabulut, Yusuf and Kaynak, Yusuf and Sharif, Safian and Suhaimi, Mohd. Azlan (2022) Effect of machining and drag finishing on the surface integrity and mechanical properties of Inconel 718 alloys fabricated by laser powder bed fusion additive manufacturing. Materialwissenschaft und Werkstofftechnik, 53 (1). pp. 109-118. ISSN 0933-5137

Kathiresan, Kabiilesh and Imisi Oluwa, Abiola and Mat, Shabudin and Abdullahi, Yahaya Daura and Jafari Gahraz, Seyed Reza and Mat Lazim, Tholudin and Musa, Nur Amalina (2022) Blowing active flow control on FFA-W3-270 airfoil model. In: Proceedings of the 2nd International Seminar on Aeronautics and Energy (ISAE 2022), 17 September 2022, UTM, Kuala Lumpur, Malaysia - Virtual, Online.

Khademi, Shahab (2022) Automation of hollow fiber membrane fabrication system and optimization of spinning parameters for polymeric membrane in gas separation. PhD thesis, Universiti Teknologi Malaysia.

Khairuddin, Jauhari and Abdul Malik, Adi Maimun and Hiekata, Kazuo and Siow, Chee Loon and Ali, Arifah (2022) Web application with data centric approach to ship powering prediction using deep learning. Software Impacts, 11 (NA). pp. 1-4. ISSN 2665-9638

Khairuddin, Jauhari Tahir (2022) Integration of systems and concurrent engineering using artificial intelligence in improving passenger ship preliminari design. PhD thesis, Universiti Teknologi Malaysia.

Khairul Yusri, Ahmat Rajab (2022) Transient removal of contaminant from a channel with differentially heated wall of cavity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Khan, S. A. and Wong, K. J. and Sung, A. N. and Johar, M. and Tamin, M. N. (2022) Characterization of interface damage of fiber-reinforced polymer composite laminates under mode I loading. In: 2021 International Conference of Industrial, Mechanical and Electrical Engineering, ICIMEE 2021, 7 December 2021, Virtual, Online.

Khor, Wei Han and Kang, Hooi-Siang and Lim, Jun-Wei and Koji, Iwamoto and Tang, Collin Howe-Hing and Goh, Pei Sean and Lee, Kee Quen and Shaharuddin, Nik Mohd. Ridzuan and Lai, Nai Yeen Gavin (2022) Microalgae cultivation in offshore floating photobioreactor: State-of-the-art, opportunities and challenges. Aquacultural Engineering, 98 (NA). pp. 1-28. ISSN 0144-8609

Kumar, S. and Singh, I. and Koloor, S. S. R. and Kumar, D. and Yahya, Mohd. Yazid (2022) On laminated object manufactured FDM-Printed ABS/TPU multimaterial specimens: an insight into mechanical and morphological characteristics. Polymers, 14 (19). pp. 1-19. ISSN 2073-4360

Kumareswaran, Dhanesh (2022) Feature-based real-time aerial image stitching and quality assessment for post-disaster application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Kursus, Maisarah and Liew, Pay Jun and Che Sidik, Nor Azwadi and Wang, Jingsi (2022) Recent progress on the application of nanofluids and hybrid nanofluids in machining: a comprehensive review. International Journal of Advanced Manufacturing Technology, 121 (3-4). 1455 -1481. ISSN 0268-3768

Latib, Muhammad Azamuddin and Kamaruzaman, Natrah (2022) Simulation study on the heat performance of different nanofluids for rotating detonation engine cooling. Journal of Advanced Research in Micro and Nano Engineering, 5 (1). pp. 1-8. ISSN 2756-8210

Latif, Kamran and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2022) Development of new integrated CNC system for ISO 6983 data interface model. International Journal on Interactive Design and Manufacturing, 16 (3). pp. 1053-1061. ISSN 1955-2513

Latif, Kamran and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2022) Development of virtual component-based STEP-compliant CNC system. Progress in Additive Manufacturing, 7 (1). pp. 77-85. ISSN 2363-9512

Lee, Chiew Tin and Lee, Mei Bao and Chong, William Woei Fong and Samion, Syahrullail (2022) Nano-frictional investigation on boundary lubricity of oleic acid, methyl oleate and trimethylolpropane trioleate. Jurnal Tribologi, 32 (NA). pp. 1-15. ISSN 2289-7232

Lee, Chiew Tin and Lee, Mei Bao and Hamdan, Siti Hartini and Chong, William Woei Fong and Chong, Cheng Tung and Zhang, Hedong and Chen, Allan Woei Loon (2022) Trimethylolpropane trioleate as eco-friendly lubricant additive. Engineering Science and Technology, an International Journal, 35 (NA). pp. 1-10. ISSN 2215-0986

Lee, Chiew Tin and Lee, Mei Bao and Mong, Guo Ren and Chong, William Woei Fong (2022) A bibliometric analysis on the tribological and physicochemical properties of vegetable oil–based bio-lubricants (2010–2021). Environmental Science and Pollution Research, 29 (37). pp. 56215-56248. ISSN 0944-1344

Lee, Ke Yin (2022) Barrier analysis approach in metal additive manufacturing implementation with environment consideration. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Lee, Mei Bao and Lee, Chiew Tin and Chong, William Woei Fong and Chong, Cheng Tung and Mohd. Sanip, Suhaila (2022) Surface morphology and nanofriction of thermally treated multilayer graphene. International Journal of Surface Science and Engineering, 16 (4). pp. 349-366. ISSN 1749-785X

Leman, Zulkarnain Ali and Mohammad Ariff, Mohd. Hatta and Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Mazlan, Saiful Amri and Bahiuddin, Irfan and Yakub, Fitri (2022) Adaptive model predictive controller for trajectory tracking and obstacle avoidance on autonomous vehicle. Jurnal Teknologi, 84 (4). pp. 139-148. ISSN 0127-9696

Leong, Chee Hang and Rosli, Nur Athirah Nadwa and Ab. Wahid, Mastura and Othman, Norazila and Mat, Shabudin and Md. Zain, Mohd. Zarhamdy (2022) CFD analysis on propeller at varying propeller disc angle and advance ratio. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 82-95. ISSN 2289-7879

Leong, Wan Yee (2022) Serial-integrated multi-criteria decision-making technique for resilient supplier selection in the manufacturing industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Leong, Wan Yee and Wong, Kuan Yew and Wong, Wai Peng (2022) A new integrated multi-criteria decision-making model for resilient supplier selection. Applied System Innovation, 5 (1). pp. 1-18. ISSN 2571-5577

Letchumanan, L. Thiruvarasu (2022) Structural model of enablers for Green Lean Six Sigma implementation in Malaysian manufacturing industries. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Letchumanan, L. Thiruvarasu and Gholami, Hamed and Mohd. Yusof, Noordin and Ngadiman, Nor Hasrul Akhmal and Salameh, Anas A. and Streimikien, Dalia and Cavallaro, Fausto (2022) Analyzing the factors enabling green lean six sigma implementation in the Industry 4.0 Era. Sustainability, 14 (6). pp. 1-15. ISSN 2071-1050

Li, Pengjie and Dai, Tianjiao and Jin, Xing and Dong, Leilei and Liu, Shuaiqi and Yang, Shuo and Xiang, Xianbo and Kang, Hooi Siang (2022) An efficient fatigue analysis for the nonbonded flexible riser. Ships and Offshore Structures, 17 (10). pp. 2238-2253. ISSN 1744-5302

Ling, Chee Huat (2022) Effects of pre-turbocharger turbine water injection on the performance of spark-ignition engine. Masters thesis, Universiti Teknologi Malaysia.

Low, Kean Ong and Johar, Mahzan and Sung, Aun Naa and Mohd. Nasir, Mohd. Nazri and Koloor, Seyed Saeid Rahimian and Petru, Michal and Israr, Haris Ahmad and Wong, King Jye (2022) Displacement rate effects on mixed-mode I/II delamination of laminated carbon/epoxy composites. Polymer Testing, 108 (NA). pp. 1-11. ISSN 0142-9418

M., Manu and Roy, K. E. Reby and M., Mubarak Ali and Abu Hassan, Shukur and Masihadas, Akhil (2022) Effect of EPD coated silanized graphene oxide on carbon fiber reinforced plastic: An emphasis on mechanical properties at cryogenic temperatures. Surface and Coatings Technology, 451 (NA). pp. 1-9. ISSN 0257-8972

M. Isnal, Mohd. Fadthul Ikmal and Edzuan, Norizah R. and Zainal, Muhamad Nor Firdaus and Ahmad, Norhayati and Raja Ibrahim, Raja Kamarulzaman and Agun, Linda (2022) Cold plasma: a potential alternative for rice grain postharvest treatment management in Malaysia. Rice Science, 29 (1). pp. 1-15. ISSN 1672-6308

Ma, Quanjin and Rejab, M.R.M. and Abu Hassan, Shukur and Hu, Haichao and Kumar, A. Praveen (2022) Potentiality of MWCNT on 3D-printed bio-inspired spherical-roof cubic core under quasi-static loading. Journal of the Mechanical Behavior of Biomedical Materials, 136 . pp. 1-7. ISSN 1751-6161

Majeed, Faraj Saeid Adrees (2022) Performance of minimum quantity lubrication using paraffin based nanofluids during hard turning of AISI420 stainless steel. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Manaf, Mohamad Nor Hishamuddin and Azman, Nurul Farhanah and Musa, Mohamad Nor and Samion, Syahrullail and Che Sidik, Nor Azwadi and Asako, Yutaka (2022) Fire resistance rating for gypsum and kapok fiber composite materials. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (2). pp. 15-23. ISSN 2289-7879

Mansingh, Bright Brailson and Binoj, Joseph Selvi and Anbazhagan, Vadivel Nayanar and Abu Hassan, Shukur and Goh, Kheng Lim and Siengchin, Suchart and Sanjay, Mavinkere Rangappa and Jaafar, Mariatti and Liu, Yucheng (2022) Characterization of Cocos nucifera L. peduncle fiber reinforced polymer composites for lightweight sustainable applications. Journal of Applied Polymer Science, 139 (2). n/a. ISSN 0021-8995

Mansor, M. A. and Ahmad, Z. and Abdullah, M. R. (2022) Crashworthiness capability of thin-walled fibre metal laminate tubes under axial crushing. Engineering Structures, 252 (NA). pp. 1-14. ISSN 0141-0296

Mat, Mohamad Nur Hidayat and Ahmad Noordin, Muhammad Nurashman (2022) Fluid behavior investigation on a single-phase ejector using numerical approach. Jurnal Mekanikal, 45 (NA). pp. 39-46. ISSN 2289-3873

Mat, Mohamad Nur Hidayat and Asmuin, Norzelawati and Md. Basir, Md. Faisal and Alazwari, Mashhour A. and Safaei, Mohammad Reza (2022) Aeroacoustic analysis of dry ice blasting on divergent nozzle length using CFD to acoustic couple simulation. Journal of Thermal Analysis and Calorimetry, 147 (11). pp. 6437-6448. ISSN 1388-6150

Mat, Mohamad Nur Hidayat and Rahman, Saidur (2022) Heat transfer enhancement by nanofluid coupling with surfactant in overcoming particle agglomeration for microchannel heat sinks. Microfluidics and Nanofluidics, 26 (9). pp. 1-15. ISSN 1613-4982

Mat Jusoh, Muhamad Shahirul and Salim, Muhammad Hazeem and Dzukieman, Nuralis Batrisha and Yahya, Mohd. Yazid and Ahmad, Haris Ahmad Israr and Sulaiman, Abdul Halim (2022) Flatwise and edgewise compression properties of composite PLA core fabricated via additive manufacturing technique. In: 7th International Conference and Exhibition on Sustainable Energy and Advanced Material, ICE-SEAM 2021, 23 November 2021, Virtual, Online.

Mat Jusoh, Muhamad Shahirul and Salim, Muhammad Hazeem and Dzukieman, Nuralis Batrisha and Yahya, Mohd. Yazid and Israr Ahmad, Haris Ahmad and Sulaiman, Abdul Halim (2022) Flatwise and edgewise compression properties of composite PLA core fabricated via additive manufacturing technique. In: Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 37-41. ISBN 978-981193178-9

Mat Razi, Muhammad Fikri Irsyad and Che Daud, Zul Hilmi (2022) Li-NMC battery internal resistance at wide range of temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 99 (1). pp. 9-16. ISSN 2289-7879

Mazali, Izhari Izmi and Che Daud, Zul Hilmi and Abdul Hamid, Mohd. Kameil and Tan, Victor and Mohd. Samin, Pakharuddin and Jubair, Abdullah and Ibrahim, Khairul Amilin and Che Kob, Mohd. Salman and Xinrui, Wang and Ab. Talib, Mat Hussin (2022) Review of the methods to optimize power flow in electric vehicle powertrains for efficiency and driving performance. Applied Sciences (Switzerland), 12 (3). pp. 1-48. ISSN 2076-3417

Mazlan, Mohamad Zahid (2022) Computational fluid dynamics analysis and optimization of highway savonius wind turbine integrated with guide vanes. Masters thesis, Universiti Teknologi Malaysia.

Mazlan, Muhammad Amri (2022) Predetonation properties of rotating supersonic combustion engine at varying equivalence ratio. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Mazlan, Siti Nur Humaira (2022) Design for additive manufacturing using triz-am principles in supporting product design and development. PhD thesis, Universiti Teknologi Malaysia.

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Deja, Mariusz (2022) Development of technical creativity featuring modified TRIZ-AM inventive principle to support additive manufacturing. Journal of Mechanical Design, 144 (5). pp. 1-15. ISSN 1050-0472

Md. Dani, Mohamad Airul Amin (2022) Numerical analysis on bonding stress of carbon fibre reinforced epoxy. Masters thesis, Universiti Teknologi Malaysia.

Md. Sunhazim, Nur Shamimi Amirah and Mohd. Zawawi, Fazila and Abidin, Ummikalsom and Samion, Syahrullail and Ismail, Kamarulafizam and Ismail, Ainaa Maya Munira (2022) CFD investigation on the jet-engine inspired wind turbine. CFD Letters, 14 (2). pp. 72-80. ISSN 2180-1363

Md. Sunhazim, Nur Shamimi Amirah and Norhaidi, Ummi Aqila and Muhammad Yazid, Muhammad Afiq Witri and Mohd. Zawawi, Fazila and Abidin, Ummikalsom (2022) Characterization of fluid flow through porous media. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 22-32. ISSN 2289-7879

Md. Taib, M. Ikram and S. N. Waheeda, S. N. Waheeda and Jasman, Faezah and M. Yusop, Mohd. Zamri and Zainal, Norzaini (2022) GaN nucleation on patterned sapphire substrate with different shapes for improved GaN overgrowth. Vacuum, 197 (NA). pp. 1-11. ISSN 0042-207X

Md. Towfiqul Islam, Abu Reza and Pal, Subodh Chandra and Chakrabortty, Rabin and M. Idris, Abubakr and Salam, Roquia and Islam, Md. Saiful and Zahid, Anwar and Shahid, Shamsuddin and Ismail, Zulhilmi (2022) A coupled novel framework for assessing vulnerability of water resources using hydrochemical analysis and data-driven models. Journal of Cleaner Production, 336 (130407). pp. 1-15. ISSN 0959-6526

Md. Zain, Mohd. Zarhamdy and Zolfagharian, Ali and Mohammadi, Moslem and Bodaghi, Mahdi and Abu Bakar, Abd. Rahim and Kouzani, Abbas Z. (2022) A portable non-contact tremor vibration measurement and classification apparatus. Actuators, 11 (1). pp. 1-13. ISSN 2076-0825

Mdd. Nordin, Nur Naqiuddin (2022) Energy absorption performances of glass-fibre reinforced polymer cylindrical structures under hoop tensile loading. Masters thesis, Universiti Teknologi Malaysia.

Meng, Chiong Soon and Bala Krishnan, Malarvili and Mohammad, Mahadhir and Md. Sah, Muhammad Hanafi (2022) Design of a drop impact test rig for accelerometer validation for turbocharger application. Jurnal Mekanikal, 45 . pp. 53-62. ISSN 2289-3873

Mohamad Faiz Foong, Muhammad Faruq Foong and Thein, Chung Ket and Yurchenko, Daniil (2022) Structural optimisation through material selections for multi-cantilevered vibration electromagnetic energy harvesters. Mechanical Systems and Signal Processing, 162 (NA). pp. 1-18. ISSN 0888-3270

Mohamad Naser, Nur Laila Nabilah and Mohd. Rohani, Jafri (2022) Development and validating of measuring tools in occupational, safety and health (OSH) culture. In: Proceedings of the 3rd Asia Pacific International Conference on Industrial Engineering and Operations Management, 13 September 2022 - 15 September 2022, Johor Bahru, Johor, Malaysia.

Mohamed, Sherif Ibrahim Abdelmaksoud (2022) Hybrid active force control for fixed based rotorcraft. PhD thesis, Universiti Teknologi Malaysia.

Mohammad Lotfi, Mohammad Lotfi and Farid, Ali Akhavan and Javad, Akbari and Mohruni, Amrifan Saladin (2022) Evaluation of surface integrity when drilling inconel 718 through experimental measurement and finite element analysis. International Journal of Advanced Manufacturing Technology, 119 (7-8). pp. 4237-4248. ISSN 0268-3768

Mohammad Zandie, Mohammad Zandie and Ng, Hoon Kiat and Gan, Suyin and Muhamad Said, Mohd. Farid and Cheng, Xinwei (2022) Development of a reduced multi-component chemical kinetic mechanism for the combustion modelling of diesel-biodiesel-gasoline mixtures. Transportation Engineering, 7 . pp. 1-20. ISSN 2666-691X

Mohammad Zandie, Mohammad Zandie and Ng, Hoon Kiat and Gan, Suyin and Muhamad Said, Mohd. Farid and Cheng, Xinwei (2022) A comprehensive CFD study of the spray combustion, soot formation and emissions of ternary mixtures of diesel, biodiesel and gasoline under compression ignition engine-relevant conditions. Energy, 260 (NA). pp. 1-19. ISSN 0360-5442

Mohammad Zandie, Mohammad Zandie and Ng, Hoon Kiat and Gan, Suyin and Muhamad Said, Mohd. Farid and Cheng, Xinwei (2022) Review of the advances in integrated chemical kinetics-computational fluid dynamics combustion modelling studies of gasoline-biodiesel mixtures. Transportation Engineering, 7 . pp. 1-18. ISSN 2666-691X

Mohd Yamin, Ahmad H. and Mat Darus, Intan Z. and Mohd. Nor, Nur S. and Ab. Talib, Mat H. (2022) Intelligent pid controller with cuckoo search algorithm and particle swarm optimisation for semi-active suspension system using magneto-rheological damper. International Review of Mechanical Engineering, 16 (3). pp. 154-162. ISSN 1970-8734 (Unpublished)

Mohd. Aliff, Mohd. Aliff and Mohammad Imran, Mohammad Imran and Sairul Izwan, Sairul Izwan and Mohd. Ismail, Mohd. Ismail and Nor Samsiah, Nor Samsiah and Tetsuya Akagi, Tetsuya Akagi and Shujiro Dohta, Shujiro Dohta and Weihang Tian, Weihang Tian and So Shimooka, So Shimooka and Ahmad Athif, Ahmad Athif (2022) Development of pipe inspection robot using soft actuators, microcontroller and labVIEW. International Journal of Advanced Computer Science and Applications, 13 (3). pp. 349-354. ISSN 2158-107X

Mohd. Asry, Nur Ayreen Nafissa and Md. Sunhazim, Nur Shamimi Amirah and Kamaruzaman, Natrah (2022) Characterization of a 3d printed self-powered micropump mould for microfluidics application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 97 (1). pp. 127-135. ISSN 2289-7879

Mohd. Azman, Asyraf and Mat Jusoh, Suriani and Ghazali, Che Mohd. Ruzaidi and Abdan, Khalina and Rushdan, Ahmad Ilyas and Muhammad Rizal, Muhammad Asyraf and Syamsir, Agusril and Azmi, Ashraf and Mohamed, Abdullah (2022) Development of natural fibre-reinforced polymer composites ballistic helmet using concurrent engineering approach: a brief review. Sustainability, 14 (12). pp. 1-20. ISSN 2071-1050

Mohd. Fadzli, Ali Akhbar and Hadi, Muhamad Sukri and Eek, Rickey Ting Pek and Ab. Talib, Mat Hussin and Mohd. Yatim, Hanim and Mat Darus, Intan Zaurah (2022) PID controller based on flower pollination algorithm of flexible beam system. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020, Gambang, Kuantan, Pahang.

Mohd. Fadzli, Ali Akhbar and Hadi, Muhamad Sukri and Ting, Rickey Pek Eek and Ab. Talib, Mat Hussin and Mohd. Yatim, Hanim and Mat Darus, Intan Zaurah (2022) PID controller based on flower pollination algorithm of flexible beam system. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 173-183. ISBN 978-981334596-6

Mohd. Fohimi, Nor Azirah and Hyie, Koay Mei and Budin, Salina and Che Maideen, Normariah and Kamsah, Nazri and Mohamed Kamar, Haslinda (2022) An experimental study of indoor air pollution in new office building. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 94 (1). pp. 120-128. ISSN 2289-7879

Mohd. Ghazali, Farah Amira and Syahrom, Ardiyansyah (2022) Mechanical behaviour of cancellous bone: compression and three-point bending test. Malaysian Journal of Fundamental and Applied Sciences, 18 (3). pp. 295-303. ISSN 2289-599X

Mohd. Khairul Faizi, Mohd. Khairul Faizi and Abu Bakar, Shahriman and Abdul Majid, Mohd. Shukry and Mohd. Tamrin, Shamsul Bahri and Israr, Haris Ahmad and Abdul Rahman, Anas and Ng, Yee Guan and Mohd. Razlan, Zuradzman and Kamis, Norzarul Asri and Wan Khairunizam, Wan Khairunizam (2022) Tensile characterizations of oil palm empty fruit bunch (OPEFB) fibres reinforced composites in various epoxy/fibre fractions. Biointerface Research in Applied Chemistry, 12 (5). pp. 6148-6163. ISSN 2069-5837

Mohd. Pabli, Fathin Asila and Muhammad Sharifuddin, Syifa’ and Wan Ali, Wan Fahmin and Mohamed, Julie Juliewatty and Sulaiman, Muhammad Azwadi (2022) Effect of sintering time on the dielectric properties of CaCu3Ti4O12 using enhanced microwave processing. In: 2021 International Conference on Bioengineering and Technology, IConBET2021, 24 - 25 May 2022, Kelantan, Virtual.

Mohd. Ramli, Siti Mazarina Qarirah and Fadil, Nor Akmal and Yahya, Hamdan and Wan Ali, Wan Fahmin Faiz (2022) Structural and thermal characteristics of Ti6Al4V (Ti64) metal powders for direct energy deposition. In: 14th AUN/SEED-Net Regional Conference on Materials and 4th International Postgraduate Conference on Materials, Minerals and Polymer (RCM & MAMIP 2021), 1 December 2021 - 2 December 2021, Virtual, Online.

Mohd. Ramli, Siti Mazarina Qarirah and Fadil, Nor Akmal and Yahya, Hamdan and Wan Ali, Wan Fahmin Faiz (2022) Structural and thermal characteristics of Ti6Al4V (Ti64) metal powders for direct energy deposition. Materials Today: Proceedings, 66 (5). pp. 2919-2923. ISSN 2214-7853

Mohd. Salme, Muhammad Nazri and Hadi, Muhamad Sukri and Jamali, Annisa and Mohd. Yatim, Hanim and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Hub angle control of flexible manipulator based on bacterial foraging optimization. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021, Gambang, Kuantan, Pahang.

Mohd. Salme, Muhammad Nazri and Hadi, Muhamad Sukri and Jamali, Annisa and Mohd. Yatim, Hanim and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Hub angle control of flexible manipulator based on bacterial foraging optimization. In: Enabling Industry 4.0 through Advances in Mechatronics Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Electrical Engineering, 900 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 181-192. ISBN 978-981192094-3

Mohd. Samsuri, Saiful Farhan (2022) Multiobjective model structure optimization using hybrid differential evolution for multivariable dynamic system modeling. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Yamin, Ahmad Hafizal and Abdul Talib, Mat Hussin and Mat Darus, Intan Zaurah and Mohd. Nor, Nur Safwati (2022) Magneto-rheological (MR) damper – parametric modelling and experimental validation for lord RD 8040-1. Jurnal Teknologi, 84 (2). pp. 27-34. ISSN 0127-9696

Mohd. Yatim, Hanim and Mat Darus, Intan Zaurah and Ab. Talib, Mat Hussin and Abu Bakar, Muhammad Haikal and Hadi, Muhamad Sukri and Ab. Wahid, Mastura (2022) Active vibration control of flexible manipulator using genetic algorithm with parameter exchanger. In: 8th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2022, 27 - 28 September 2022, Melaka, Malaysia.

Mohd. Yatim, Hanim and Zamri, Ahmad Nur Yussuf and Hadi, Muhamad Sukri and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Intelligent optimization of novel particle swarm optimization with explorer (PSOE) for identification of flexible manipulator system. In: iM3F2021: Innovative Manufacturing, Mechatronics & Materials Forum 2021, 20th September 2021, Gambang, Virtually hosted by Universiti Malaysia Pahang.

Mohd. Yatim, Hanim and Zamri, Ahmad Nur Yussuf and Hadi, Muhamad Sukri and Ab. Talib, Mat Hussin and Mat Darus, Intan Zaurah (2022) Intelligent optimization of novel particle swarm optimization with explorer (PSOE) for identification of flexible manipulator system. In: Enabling Industry 4.0 through Advances in Mechatronics Selected Articles from iM3F 2021, Malaysia. Lecture Notes in Electrical Engineering, 900 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 361-373. ISBN 978-981192094-3

Mohd. Yusof, Ab. Aziz and Mohd. Szali Januddi, Mohd. Al Fatihhi and Harun, Muhamad Noor (2022) A study of micro-scale solder bump geometric shapes using minimizing energy approach for different solder materials. Ain Shams Engineering Journal, 13 (6). pp. 1-7. ISSN 2090-4479

Mohd. Yusof, Ab. Aziz and Mohd. Szali Januddi, Mohd. Al-Fatihhi and Md. Isa, Kamariah and Harun, Muhamad Noor (2022) The tendency of nature towards hexagon shape formation due to minimizing surface energy. International Journal of Integrated Engineering, 14 (1). pp. 40-47. ISSN 2229-838X

Mohd. Yusof, Nurul Hannah and Mohd. Subha, Nurul Adilla and Hamzah, Norikhwan and Ismail, Fatimah Sham (2022) Controllability analysis of convergence on water distribution system architecture with fault using cellular automata sequence. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 - 27 October 2021, Virtual, Online.

Mohd. Zamberi, Mahanum (2022) Microwave enhanced transesterification of biodiesel from non-edible feedstocks using waste mollusc shells as heterogeneous catalyst. PhD thesis, Universiti Teknologi Malaysia.

Mohmd. Arifin, Nabila Afif and Mat Saman, Muhamad Zameri and Sharif, Safian and Ngadiman, Nor Hasrul Akhmal (2022) Sustainability implications of additive manufacturing. In: HUMENS: International Human Engineering Symposium 2021, 16 December 2021, Virtual, Online.

Mohmd. Arifin, Nabila Afif and Mat Saman, Muhamad Zameri and Sharif, Safian and Ngadiman, Nor Hasrul Akhmal (2022) Sustainability implications of additive manufacturing. In: Human-Centered Technology for a Better Tomorrow Proceedings of HUMENS 2021. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 441-452. ISBN 978-981164114-5

Mong, Guo Ren and Chong, Cheng Tung and Chong, William Woei Fong and Ng, Jo-Han and Ong, Hwai Chyuan and Ashokkumar, Veeramuthu and Tran, Manh-Vu and Karmakar, Srinibas and Goh, Brandon Han Hoe and Mohd. Yasin, Mohd. Fairus (2022) Progress and challenges in sustainable pyrolysis technology: Reactors, feedstocks and products. Fuel, 324 (NA1). pp. 1-20. ISSN 0016-2361

Mong, Guo Ren and Chong, William Woei Fong and Mohd. Nor, Siti Aminah and Ng, Jo Han and Chong, Cheng Tung and Idris, Rubia and Chiong, Meng Choung and Wong, Syieluing and Nyakuma, Bemgba Bevan (2022) Waste-to-BioEnergy pathway for waste activated sludge from food processing industries: An experiment on the valorization potential under CO2 and N2 atmospheres through microwave-induced pyrolysis. Fuel, 323 (NA). pp. 1-11. ISSN 0016-2361

Moslemi, Navid and Abdi, Behzad and Gohari, Soheil and Sudin, Izman and Atashpaz-Gargari, E. and Redzuan, Norizah and Ayob, Amran and Burvill, Colin and Meini Su, Meini Su and Arya, Farid (2022) Thermal response analysis and parameter prediction of additively manufactured polymers. Applied Thermal Engineering, 212 (NA). pp. 1-17. ISSN 1359-4311

Moslemi, Navid and Abdi, Behzad and Gohari, Soheil and Sudin, Izman and Redzuan, Norizah and Ayob, Amran and Ahmed, Mizan and Rhee, Sehun and Burvill, Colin (2022) Influence of welding sequences on induced residual stress and distortion in pipes. Construction and Building Materials, 342 (NA). pp. 1-18. ISSN 0950-0618

Moslemi, Navid and Gohari, Soheil and Abdi, Behzad and Sudin, Izman and Ghandvar, Hamidreza and Redzuan, Norizah and Hassan, Shukur and Ayob, Amran and Rhee, Sehun (2022) A novel systematic numerical approach on determination of heat source parameters in welding process. Journal of Materials Research and Technology, 18 (n/a). pp. 4427-4444. ISSN 2238-7854

Muhammad Fakhree, Muhammad Akif and Nordin, Nur Azmah and Nazmi, Nurhazimah and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Ubaidillah, Ubaidillah and Ahmad, Fauzan and Choi, Seung Bok (2022) Field-dependent rheological properties of magnetorheological elastomer with fountain-like particle chain alignment. Micromachines, 13 (4). pp. 1-19. ISSN 2072-666X

Muhammad Kashif, Muhammad Kashif and Muhammad Fahmi, Muhammad Fahmi and Dita Aprilia Hariyani, Dita Aprilia Hariyani and Akif Rahmatilah, Akif Rahmatilah and Khusnul Ain, Khusnul Ain and Yunus Susilo, Yunus Susilo and Syahrom, Ardiyansyah and Suryani Dyah Astuti, Suryani Dyah Astuti (2022) An improved Kalman filter in Photoplethysmography DC component denoising for cardiorespiratory analysis. Rawal Medical Journal, 47 (3). pp. 743-747. ISSN 0303-5212

Muhammad Rizal, Muhammad Asyraf and Mazlan, Rafidah and Ebadi, S. and A., Azrina and Razman, M. R. (2022) Mechanical and thermal performance of sugar palm fibrethermoset polymer composites: a short review. Journal Of Natural Fibre Polymer Composites, 29 . pp. 6493-6516. ISSN 6493–6516

Muhammad Zulkarnain, Muhammad Zulkarnain and Tofrowaih, Khairul Amri and Ahmed, Yaseen Adnan (2022) Design study of natural fiber reinforced honeycomb panel for lightweight and portable shelter materials for typical Malaysian climate. Composites Theory and Practice, 2022 (1). pp. 44-49. ISSN 2084-6096

Murali, R. and Razlan, Z. M. and Bakar, S. A. and Suffer, Kadhim H. and Ibrahim, Z. and Wan, W. K. and M. N., Rudzuuan and Rani, M. F. H. (2022) Temperature distribution analysis of lithium-ion polymer battery surface. In: 9th International Conference on Electrical and Electronics Engineering, ICEEE 2022, 29 - 31 March 2022, Alanya, Türkiye.

Muralitharan, Mugilan (2022) Ergonomic study on car seat design to improve the comfort of Malaysian drivers. Masters thesis, Universiti Teknologi Malaysia.

Naeemah, Ali Jaber and Wong, Kuan Yew (2022) Positive impacts of lean manufacturing tools on sustainability aspects: a systematic review. Journal of Industrial and Production Engineering, 39 (7). pp. 552-571. ISSN 2168-1015

Nejad, Ali Farokhi and AL-Fatlwe, Fatima Mohammed K. and Koloor, Seyed Saeid Rahimian and Alipour, Roozbeh and Davoudi, Mohammadmahdi and Mohd. Hamdi, Mohd. Hamdi and Tamin, Mohd. Nasir (2022) Design of a novel creep testing machine to investigate the creep life history of austenitic steel foil at elevated temperature. Fatigue and Fracture of Engineering Materials and Structures, 45 (9). pp. 2563-2575. ISSN 8756-758X

Ng, Cheng Yee and Tuhaijan, Siti Nor Adha and Kurian, V. John and Mustaffa, Zahiraniza and Yazid, Edwar and Kang, Hooi Siang (2022) Effect of directional spreading angles on the wave hydrodynamic coefficients for vertical cylinder. Ain Shams Engineering Journal, 13 (2). pp. 1-12. ISSN 2090-4479

Ng, Lin Feng and Yahya, Mohd. Yazid and Mustafa, Zaleha (2022) Exploration of novel fiber-metal laminates sandwich structures with cellulosic ramie woven core. Polymer Composites, 43 (9). pp. 6667-6677. ISSN 0272-8397

Nilashi, Mehrbakhsh and Fallahpour, Alireza and Wong, Kuan Yew and Ghabban, Fahad (2022) Customer satisfaction analysis and preference prediction in historic sites through electronic word of mouth. Neural Computing and Applications, 34 (16). pp. 13867-13881. ISSN 0941-0643

Noordin, Muhammad Azfar and Kori, Mohamad Ikhwan and Abdul Wahab, Abdul Hadi and Syahrom, Ardiyansyah and Md. Saad, Amir Putra (2022) Fluid flow analysis of integrated porous bone scaffold and cancellous bone at different skeletal sites: in silico study. Transport in Porous Media, 145 (1). pp. 271-290. ISSN 0169-3913

Noordin, Muhammad Azfar and Zulkipli, Mohd. Aidil Syukri and Kadir Hussein, Nur Aqila and Md. Saad, Amir Putra (2022) Evaluation of functionally graded architecture using fused filament fabrication technique for bone scaffold applications. International Journal of Integrated Engineering, 14 (2). pp. 1-6. ISSN 2229-838X

Olohunde, Sadiq Taoheed (2022) Electrophoretic deposition of hydroxyaptite on homogenized magnesium based alloy for biomedical applications. PhD thesis, Universiti Teknologi Malaysia.

Olugu, Ezutah Udoncy and Wong, Kuan Yew and Yong, Jonathan Chung Ee and Mammedov, Yslam D. (2022) Incorporating sustainability and maintenance for performance assessment of offshore oil and gas platforms: a perspective. Sustainability, 14 (2). pp. 1-19. ISSN 2071-1050

Omar Elfarouk Elsherif, Omar Mohammed (2022) Sustainable closed-loop supply chain model with stochastic demand and return. PhD thesis, Universiti Teknologi Malaysia.

Ong, Joo Boon and Ma'aram, Azanizawati and Tee, Chee Hong (2022) 3D scanner's accuracy in different races of head and face measurement for ergonomic design. Malaysian Journal of Medicine and Health Sciences, 18 . pp. 65-70. ISSN 1675-8544

Opia, Anthony Chukwunonso and Abdul Hamid, Mohd. Kameil and Che Daud, Zul Hilmi and Syahrullail, Samion and Johnson, Charles N. and Izmi, Mazali Izhari and Abd. Rahim, Abu Bakar (2022) Effect of surface texturing on organic carbon nanotubes tribological performance on sliding contact lubrication. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah, Malaysia.

Opia, Anthony Chukwunonso and Abdul Hamid, Mohd. Kameil and Che Daud, Zul Hilmi and Syahrullail, Samion and Johnson, Charles N. and Izmi, Mazali Izhari and Abd. Rahim, Abu Bakar (2022) Effect of surface texturing on organic carbon nanotubes tribological performance on sliding contact lubrication. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 141-145. ISBN 978-981169948-1

Opia, Anthony Chukwunonso and Abdul Hamid, Mohd. Kameil and Samion, Syahrullail and Ali, Audu Ibrahim (2022) Tribological behavior of organic anti-wear and friction reducing additive of ZDDP under sliding condition: synergism and antagonism effect. Evergreen Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 9 (2). pp. 246-253. ISSN n/a

Opia, Anthony Chukwunonso and Abdul Hamid, Mohd. Kameil and Syahrullail, Samion and Johnson, Charles A. and Mamah, Stanley Chinedu and Zul Hilmi, Che Daud and Abd. Rahim, Abu Bakar and Ali, Audu Ibrahim (2022) Improving tribological properties and shear stability of base lubricant using Eichhornia crassipes carboxylmethyl cellulose polymer under different conditions. Industrial Crops and Products, 80 (n/a). pp. 1-12. ISSN 0926-6690

Opia, Anthony Chukwunonso and Abdul Hamid, Mohd. Kameil and Syahrullail, Samion and Johnson, Charles C. and Mamah, Stanley Chinedu and Ali, Audu Ibrahim and Izmi, Mazali Izhari and Zul Hilmi, Che Daud and Khan, Muhammad Salman and Abd. Rahim, Abu Bakar (2022) Effect of surfactants on the tribological behavior of organic carbon nanotubes particles additive under boundary lubrication conditions. Tribology Online, 17 (1). pp. 19-31. ISSN 1881-218X

Opia, Anthony Chukwunonso and Mohd. Kameil, Abdul Hamid and Syahrullail, Samion and Johnson, Charles A. and Izmi, Mazali Izhari and Zul Hilmi, Che Daud and Abd. Rahim, Abu Bakar (2022) Eichhornia crassipes nanoparticles as a sustainable lubricant additive: Tribological properties optimization and performance under boundary lubrication regime. Industrial Crops and Products, 175 (n/a). pp. 1-13. ISSN 0926-6690

Opia, Anthony Chukwunonso and Mohd. Kameil, Abdul Hamid and Syahrullail, Samion and Johnson, Charles A. N. and Izmi, Mazali Izhari and Mamah, Stanley Chinedu and Ali, Audu Ibrahim and Abd. Rahim, Abu Bakar and Veza, Ibham (2022) Tribological behavior of organic formulated anti-wear additive under high frequency reciprocating rig and unidirectional orientations: particles transport behavior and film formation mechanism. Tribology International, 167 (NA). pp. 1-17. ISSN 0301-679X

Othman, Nurain (2022) Computational fluid dynamics of unsteady aerodynamic wake on helicopter main rotor-hub assembly. Masters thesis, Universiti Teknologi Malaysia.

Othman, Nurain and Ishak, Iskandar Shah and Dahalan, Md. Nizam (2022) Static analysis of unsteady aerodynamics wake of simplified helicopter model via simulation work. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (1). pp. 142-153. ISSN 2289-7879

Purwadnyana, Ida Bagus Putu and Nindhia, Tjokorda Gde Tirta and Surata, I. Wayan and Adnyana, I. Wayan Bandem and Yahya, Mohd. Yazid and Jayamani, Elammaran (2022) The effect of vacuum pressure during autoclave curing on tensile strength of epoxy composite reinforced natural fiber of Cordyline australis with sea water surface treatment. In: 4th International Conference on Advanced Materials Science, ICOAMS 2021, 25 August 2021 - 26 August 2021, Surakarta, Indonesia.

Putradamazman, Putradamazman and Mas Fawzi, Mas Fawzi and Anwar Syahmi, Anwar Syahmi and Muhamad Said, Mohd. Farid (2022) Effect of Gear Usage on the Fuel consumption of light duty vehicle by using on-board diagnostics (OBD) data. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 98 (1). pp. 56-66. ISSN 2289-7879

Rahim, Muhammad Roslan and Trisasongko, Annisa Palupi and Mohd. Jaafar, Mohammad Nazri and Othman, Norazila and Ramli, Yahaya and Abdul Malik, Muhammad Syahiran and Said, Mazlan (2022) Ulasan: pembangunan teknologi penggasan dan penggunaan. Jurnal Teknologi, 84 (1). pp. 193-210. ISSN 0127-9696

Rahman, Ibadur and Singh, Priyanka and Nirendra Dev, Nirendra Dev and Mohammed Arif, Mohammed Arif and Khan Yusufi, Faiz Noor and Azam, Ameer and Alam, M. Masroor and Singh, Sandeep and Singh Chohan, Jasgurpreet and Kumar, Raman and Sharma, Lovneesh and Tag Eldin, Elsayed Sayed Mohamed and Sharma, Shubham and Muhammad Rizal, Muhammad Asyraf (2022) Improvements in the engineering properties of cementitious composites using nano-sized cement and nano-sized additives. Materials, 15 (22). pp. 1-22. ISSN 1996-1944

Rahman, Mohammad Nurizat (2022) Numerical analysis of detonation stability in a rotating detonation engine fuelled with biogas and hydrogen. PhD thesis, Universiti Teknologi Malaysia.

Rasep, Zuraidah and Muhammad Yazid, Muhammad Noor Afiq Witri and Samion, Syahrullail (2022) A study of palm oil and engine oil viscosity effect by using CFD. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah - Malaysia.

Rasep, Zuraidah and Muhammad Yazid, Muhammad Noor Afiq Witri and Samion, Syahrullail (2022) A study of palm oil and engine oil viscosity effect by using CFD. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 128-134. ISBN 978-981169948-1

Rashidi, M. M. and Idris, M. H. and Shayfull, Z. and Ahmad, A. H. and Abdullah, M. M. A. and Pietrusiewicz, P. and Nabialek, M. and Garus, J. (2022) Microstructure and high temperature oxidation of modified ductile Ni-resist alloy with higher manganese content. Acta Physica Polonica A, 142 (1). pp. 56-59. ISSN 0587-4246

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza (2022) Integrated linear programming and analytical hierarchy process method for diesel/biodiesel/butanol in reducing diesel emissions. Journal of Cleaner Production, 337 (130297). pp. 1-21. ISSN 0959-6526

Rizali, Sahril and Chua, Ling Ling and Abdul Latif, Afif Fiqhry and Umi Nur, Umi Nur and Mat Yajid, Muhammad Azizi and Abdullah, Norazharuddin Shah and Wan Ali, Wan Fahmin Faiz (2022) AlCrN coated WC by PVD at various deposition temperatures. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18 August 2021 - 19 August 2021, Virtual, Online.

Roslan, Nurfatin Dalilah and Ghandvar, Hamidreza and Abu Bakar, Tuty Asma (2022) Microstructure development and tensile properties of ADC12 Al-Si alloy with different content of Praseodymium (Pr). Malaysian Journal of Microscopy, 18 (2). pp. 68-78. ISSN 1823-7010

Rosmi, Mohamad Saufi and Yaakob, Yazid and Mohd. Yusop, Mohd. Zamri and Md. Isa, Illyas and Sidik, Siti Munirah and Abu Bakar, Suriani and Masaki, Tanemura (2022) Investigating the structural transformation of individual Au-incorporated carbon nanofiber interconnect. Malaysian Journal of Microscopy, 18 (2). pp. 215-224. ISSN 1823-7010

Saad, Mohd. Sazli and Mohd. Nor, Azuwir and Abd. Rahim, Irfan and Syahruddin, Muhammad Ariffin and Mat Darus, Intan Zaurah (2022) Optimization of FDM process parameters to minimize surface roughness with integrated artificial neural network model and symbiotic organism search. Neural Computing and Applications, 34 (NA). pp. 17423-17439. ISSN 0941-0643

Sadiq, Ibrahim Ogu (2022) Development and performance evaluation of bioluricant enhanced with nanoparticles for sustainable machining application. PhD thesis, Universiti Teknologi Malaysia.

Sadiq, Ibrahim Ogu and Suhaimi, Mohd Azlan and Sharif, Safian and Mohd. Yusof, Noordin and Hisam, Muhammad Juzaili (2022) Enhanced performance of bio-lubricant properties with nano-additives for sustainable lubrication. Industrial Lubrication and Tribology, 74 (9). pp. 995-1006. ISSN 0036-8792

Sadiq, Ibrahim Ogu and Suhaimi, Mohd. Azlan and Sharif, Safian and Mohd. Yusof, Noordin and Hisam, Juzaili (2022) Improving thermal and tribological properties of enhanced biolubricant with graphene and maghemite nano-additives. In: Proceedings of the 3rd Malaysian International Tribology Conference. Lecture Notes in Mechanical Engineering, NA (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 179-183. ISBN 978-981169948-1

Sadiq, Ibrahim Ogu and Suhaimi, Mohd. Azlan and Sharif, Safian and Mohd. Yusof, Noordin and Hisam, Juzaili (2022) Improving thermal and tribological properties of enhanced biolubricant with graphene and maghemite nano-additives. In: 3rd Malaysian International Tribology Conference, MITC 2020, 28 September 2020 - 30 September 2020, Langkawi, Kedah - Malaysia.

Saif, Yazid and Yusof, Yusri and Latif, Kamran and Abdul Kadir, Aini Zuhra and Iliyas Ahmad, Maznah and Adam, Anbia and Hatem, Noor (2022) Development of a smart system based on STEP-NC for machine vision inspection with IoT environmental. International Journal of Advanced Manufacturing Technology, 118 (11-12). pp. 4055-4072. ISSN 0268-3768

Saif, Yazid and Yusof, Yusri and Latif, Kamran and Abdul Kadir, Aini Zuhra and lliyas Ahmed, Maznah and Adam, Anbia and Noor Hatem, Noor Hatem and Memon, Danish Ali (2022) Roundness Holes’ Measurement for milled workpiece using machine vision inspection system based on IoT structure: a case study. Measurement: Journal of the International Measurement Confederation, 195 (NA). pp. 1-14. ISSN 0263-2241

Samin, Enam and Muhammad, Muhammad Noor Afiq Witri and Che Sidik, Nor Azwadi (2022) Numerical investigation on the effect of grille blockage ratio on air flow characteristics of air vents. CFD Letters, 14 (10). pp. 32-41. ISSN 2180-1363

Saufi, Mohd. Syahril Ramadhan and Isham, M. Firdaus and Abu Hassan, M. Danial (2022) A novel blade fault diagnosis using a deep learning model based on image and statistical analysis. In: 6th International Conference on Electrical, Control and Computer Engineering, InECCE 2021, 23 August 2021, Kuantan, Pahang.

Saufi, Mohd. Syahril Ramadhan and Isham, M. Firdaus and Abu Hassan, M. Danial (2022) A novel blade fault diagnosis using a deep learning model based on image and statistical analysis. In: Proceedings of the 6th International Conference on Electrical, Control and Computer Engineering InECCE2021, Kuantan, Pahang, Malaysia, 23rd August. Lecture Notes in Electrical Engineering, 842 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 1153-1164. ISBN 978-981168689-4

Sazvar, Zeinab and Nayeri, Sina and Mirbagheri, Reza and Tanhaeean, Mehrab and Fallahpour, Alireza and Wong, Kuan Yew (2022) A hybrid decision-making framework to manage occupational stress in project-based organizations. Soft Computing, 26 (22). pp. 12445-12460. ISSN 1432-7643

Scully, Clement Cornelius (2022) Integrated regression and fuzzy model to determine remaining project duration. PhD thesis, Universiti Teknologi Malaysia.

Sekar, Vignesh and Noum, Se Yong Eh and Putra, Azma and Sivanesan, Sivakumar and Sheng, Desmond Daniel Chin Vui (2022) Fabrication of light-weighted acoustic absorbers made of natural fiber composites via additive manufacturing. International Journal of Lightweight Materials and Manufacture, 5 (4). pp. 520-527. ISSN 2588-8404

Senusi, Farasyafinaz and Mahmood, Salwa and Ngadiman, Nor Hasrul Akhmal and Mat Saman, Muhamad Zameri (2022) Environmental impact for 3D bone tissue engineering scaffolds life cycle: An assessment. Biointerface Research in Applied Chemistry, 12 (5). pp. 6504-6515. ISSN 2069-5837

Shamsudin, Mohd. Fairuz and Gan, Tat Hean (2022) Detection of vibration induced fatigue crack propagation using a hybrid method. In: 10th International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2021, 18 August 2021 - 19 August 2021, Virtual, Online.

Shithil, Shaekh Mohammad and Mohd. Faudzi, Ahmad Athif and Abdullah, Afnizanfaizal and Islam, Najmul and Mad Saad, Shahril (2022) Robust sensor fusion for autonomous UAV navigation in GPS denied forest environment. In: 5th IEEE International Symposium in Robotics and Manufacturing Automation, ROMA 2022, 6 August 2022 - 8 August 2022, Malacca, Malaysia.

Shithil, Shaekh Mohammad and Mohd. Kamil, Ahmad Ridhwan and Tasnim, Sadat and Mohd. Faudzi, Ahmad Athif (2022) Container ISO code recognition system using multiple view based on Google LSTM tesseract. In: International Conference on Computational Intelligence in Machine Learning, ICCIML 2021, 1 June 2021 - 2 June 2021, Virtual, Online.

Shithil, Shaekh Mohammad and Mohd. Kamil, Ahmad Ridhwan and Tasnim, Sadat and Mohd. Faudzi, Ahmad Athif (2022) Container ISO code recognition system using multiple view based on Google LSTM tesseract. In: Computational Intelligence in Machine Learning Select Proceedings of ICCIML 2021. Lecture Notes in Electrical Engineering, 834 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 433-440. ISBN 978-981168483-8

Siek, Hock Chai (2022) Effect of hull separation ratio and various ship draft to a low-speed catamaran in shallow water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Singh, Ajit and Gill, Andrew and Lim, David Lian Keong and Kasmaruddin, Agustina and Miri, Taghi and Chakrabarty, Anita and Chai, Hui Hui and Selvarajoo, Anurita and Massawe, Festo and Abakr, Yousif Abdalla and Mateva, Kumbirai Ivyne and Ng, Wendy Pei Qin and Serifi, Olga and Mackenzie, Claudia and Mohamad, Mardawani and Kang, Hooi Siang and Goh, Pei Sean and Lim, Jun Wei and Chan, Yi Jing (2022) Feasibility of bio-coal production from Hydrothermal Carbonization (HTC) technology using food waste in Malaysia. Sustainability, 14 (8). pp. 1-23. ISSN 2071-1050

Suhariningsih, Suhariningsih and S. Glory, S. Glory and F. Khaleyla, F. Khaleyla and H. N. Kusumawati, H. N. Kusumawati and M. Septriana, M. Septriana and Y. Susilo, Y. Susilo and A. K. Yaqubi, A. K. Yaqubi and S. D. Astuti, S. D. Astuti and Syahrom, Ardiyansyah (2022) Ameliorative and renoprotective effect of electrical stimulation on blood sugar, Blood Urea Nitrogen (BUN), creatinine levels, and the islets of langerhans weight in diabetic mice. Veterinary Medicine International, 2022 (NA). pp. 1-8. ISSN 2042-0048

Sulaiman, Suraya and Sudin, Izman and Al-Naib, Uday M. Basheer and Omar, Muhammad Firdaus (2022) Review of the nanostructuring and doping strategies for high-performance ZnO thermoelectric materials. Crystals, 12 (8). pp. 1-15. ISSN 2073-4352

Sulaiman, Suraya and Sudin, Izman and Basheer, Uday M. and Omar, Muhammad Firdaus (2022) Review on grain size effects on thermal conductivity in ZnO thermoelectric materials. RSC Advances, 12 (9). pp. 5428-5438. ISSN 2046-2069

Sule, Ahmed and Abdul Latiff, Zulkarnain and Abbas, Mohammed Azman and Veza, Ibham and Opia, Anthony C. (2022) Recent advances in diesel-biodiesel blended with nano-additive as fuel in diesel engines: A detailed review. Automotive Experiences, 5 (2). pp. 182-216. ISSN 2615-6202

Suryani Dyah Astuti, Suryani Dyah Astuti and Age Sulistyo, Age Sulistyo and Ernie Maduratna Setiawatie, Ernie Maduratna Setiawatie and Miratul Khasanah, Miratul Khasanah and Hery Purnobasuki, Hery Purnobasuki and Deny Arifianto, Deny Arifianto and Yunus Susilo, Yunus Susilo and Kartika Anggraini Alamsyah, Kartika Anggraini Alamsyah and Suhariningsih, Suhariningsih and Syahrom, Ardiyansyah (2022) An in-vivo study of photobiomodulation using 403 nm and 649 nm diode lasers for molar tooth extraction wound healing in wistar rats. Odontology, 110 (2). pp. 240-253. ISSN 1618-1247

Sutopo, Wahyudi and Khofiyah, Nida An and Muhammad Hisjam, Muhammad Hisjam and iMa’aram, Azanizawat (2022) Performance efficiency measurement model development of a Technology Transfer Office (TTO) to accelerate technology commercialization in universities. Applied System Innovation, 5 (1). pp. 1-21. ISSN 2571-5577

Tahzib, Teeab and Mohammed Abdul Hannan, Mohammed Abdul Hannan and Ahmed, Yaseen Adnan and Mustaffa Kamal, Iwan Zamil (2022) Performance analysis of H-Darrieus wind turbine with NACA0018 and S1046 aerofoils: Impact of blade angle and TSR. CFD Letters, 14 (2). pp. 10-23. ISSN 2180-1363

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal (2022) Carbon footprint of 3d-printed bone tissue engineering scaffolds: an life cycle assessment study. International Journal of Environmental Science and Development, 13 (3). pp. 63-69. ISSN 2010-0264

Takeyeldein, Mohamed M. and Ishak, Iskandar Shah and Mat Lazim, Tholudin (2022) Wind-lens turbine design for low wind speed. Wind and Structures, An International Journal, 35 (3). pp. 147-155. ISSN 1226-6116

Tan, Harmony Chern Yang and Yusof, Norimah and Ramalingam, Saravana and Baharin, Ruzalina and Syahrom, Ardiyansyah and Mansor, Azura (2022) Deep-freezing temperatures during irradiation preserves the compressive strength of human cortical bone allografts: A Cadaver study. Clinical Orthopaedics and Related Research, 480 (2). pp. 407-418. ISSN 0009-921X

Tan, Huiyi and Wong, Keng Yinn and Nyakuma, Bemgba Bevan and Mohamed Kamar, Haslinda and Chong, Wen Tong and Wong, Syie Luing and Kang, Hooi Siang (2022) Systematic study on the relationship between particulate matter and microbial counts in hospital operating rooms. Environmental Science and Pollution Research, 29 (5). pp. 6710-6721. ISSN 0944-1344

Tan, Huiyi and Wong, Keng Yinn and Othman, Mohd. Hafiz Dzarfan and Desmond, Daniel Chin Vui Sheng and Kuan, Garry and Lee, Kee Quen and Deris, Muhd. Suhaimi and Mohamed Kamar, Haslinda (2022) Preliminary assessment of thermal comfort in an operating room. Journal Of Sustainable Engineering And Built Environment, 1 (1). pp. 23-28. ISSN 2212-6090

Tan, Huiyi and Wong, Keng Yinn and Othman, Mohd. Hafiz Dzarfan and Kek, Hong Yee and Abdul Wahab, Roswanira and Ern, Garry Kuan Pei and Chong, Wen Tong and Lee, Kee Quen (2022) Current and potential approaches on assessing airflow and particle dispersion in healthcare facilities: a systematic review. Environmental Science and Pollution Research, 29 (53). pp. 80137-80160. ISSN 0944-1344

Tan, Kai Wen and Mohd. Nor, Nur Safwati and Fadil, Nor Akmal and Mat Darus, Intan Zaurah and Mohd. Yamin, Ahmad Hafizal and Mohd. Zawawi, Fazila (2022) Evaluation of the convolutional neural network’s performance in classifying steel strip’s surface defects. In: Recent Trends in Mechatronics Towards Industry 4.0 Selected Articles from iM3F 2020, Malaysia. Lecture Notes in Electrical Engineering, 730 (NA). Springer Science and Business Media Deutschland GmbH, Singapore, pp. 485-495. ISBN 978-981334596-6

Tan, Ming Hui and Chiong, Meng Soon and Chun, Yoon Young and Tsukahara, Kenichiro and Tahara, Kiyotaka (2022) An analysis of practices and challenges for plastic recycling industry in Malaysia. International Journal of Automation Technology, 16 (6). pp. 831-837. ISSN 1881-7629

Tascioglu, Emre and Kaynak, Yusuf and Sharif, Safian (2022) Machining-induced surface integrity of Inconel 718 alloy fabricated by powder bed fusion additive manufacturing under various laser processing parameters. Machining Science and Technology, 26 (1). pp. 49-71. ISSN 1091-0344

Tascioglu, Emre and Zoghipoura, Nima and Sharif, Safian and Kaynak, Yusuf (2022) Machining-induced surface integrity in brass alloys. In: 6th CIRP Conference on Surface Integrity, CSI 2022, 8 June 2022 - 10 June 2022, Lyon, France.

Thiagamani, Senthil Muthu Kumar and Pulikkalparambil, Harikrishnan and Siengchin, Suchart and Rushdan, Ahmad Ilyas and Krishnasamy, Senthilkumar and Muthukumar, Chandrasekar and Radzi, A. M. and Rangappa, Sanjay Mavinkere (2022) Mechanical, absorption, and swelling properties of jute/kenaf/banana reinforced epoxy hybrid composites: influence of various stacking sequences. Polymer Composites, 43 (11). pp. 8297-8307. ISSN 0272-8397

Tri Widodo Besar Riyadi, Tri Widodo Besar Riyadi and Mujiyono, Mujiyono and Didik Nurhadiyanto, Didik Nurhadiyanto and Hadi Mukhammad, Alaya Fadllu and Abu Hassan, Shukur and Asri Peni Wulandari, Asri Peni Wulandari and Murni, Murni (2022) Fabrication of NiAl and TiC intermetallic matrix composite coatings. Composite Interfaces, 29 (3). pp. 328-343. ISSN 0927-6440

Ung, Shern-Khai and Chong, Wen-Tong and Mat, Shabudin and Ng, Jo-Han and Kok, Yin-Hui and Wong, Kok-Hoe (2022) Investigation into the aerodynamic performance of a vertical axis wind turbine with endplate design. Energies, 15 (19). pp. 1-26. ISSN 1996-1073

Venu, Harish and Veza, Ibham and Selvam, Lokesh and Appavu, Prabhu and Raju, Dhana and Subramani, Lingesan and N. Nair, Jayashri (2022) Analysis of particle size diameter (PSD), mass fraction burnt (MFB) and particulate number (PN) emissions in a diesel engine powered by diesel/biodiesel/n-amyl alcohol blends. Energy, 250 (NA). pp. 1-18. ISSN 0360-5442

Veza, Ibham and Karaoglan, Aslan Deniz and Ileri, Erol and Afzal, Asif and Anh, Tuan Hoang and Tamaldin, Noreffendy and Herawan, Safarudin Gazali and Abbas, Muhammad Mujtaba and Muhamad Said, Mohd. Farid (2022) Multi-objective optimization of diesel engine performance and emission using grasshopper optimization algorithm. Fuel, 323 (NA). pp. 1-9. ISSN 0016-2361

Veza, Ibham and Karaoglan, Aslan Deniz and Ileri, Erol and Kaulani, S. A. and Tamaldin, Noreffendy and Latiff, Z. A. and Muhamad Said, Mohd. Farid and Anh, Tuan Hoang and Yatish, K. V. and Idris, M. (2022) Grasshopper optimization algorithm for diesel engine fuelled with ethanol-biodiesel-diesel blends. Case Studies in Thermal Engineering, 31 (NA). pp. 1-12. ISSN 2214-157X

Wan Hashim, Wan Alif Mustaqim and Azman, Nurul Farhanah and Musa, Mohamad Nor and Samion, Syahrullail and Che Sidik, Nor Azwadi and Asako, Yutaka (2022) Air flow analysis and effect of angle on rotation vane blade through 90- degree by computational fluid dynamic. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (2). pp. 84-98. ISSN 2289-7879

Wan Hashim, Wan Alif Mustaqim and Azman, Nurul Farhanah and Musa, Mohamad Nor and Samion, Syahrullail and Che Sidik, Nor Azwadi and Asako, Yutaka (2022) Air flow analysis and effect of angle on rotation vane blade through 90-degree by computational fluid dynamic. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (2). pp. 84-98. ISSN 2289-7879

Wan Zaidi, Wan Muhammad Zaid and Mohd. Yunos, Yushazaziah and Mohd. Ghazali, Normah and Pamitran, Agus Sunjarianto and Oh, Ong Taek (2022) An optimization approach in the development of a new correlation for two-phase heat transfer coefficient of R744 in a microchannel. International Journal of Air-Conditioning and Refrigeration, 30 (1). pp. 1-9. ISSN 2010-1325

Wan Zainus, Wan Mohd. Fakhri and Kamaruzaman, Natrah (2022) Boiler efficiency analysis using direct and indirect method. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021, Virtual, Online.

Wong, Joon Fatt and Chan, Jia Xin and Hassan, Azman and Mohamad, Zurina and Hashim, Shahrir and Abd. Razak, Jeefferie and Ching, Yern Chee and Yunos, Zaini and Yahaya, Ridwan (2022) Use of synthetic wollastonite nanofibers in enhancing mechanical, thermal, and flammability properties of polyoxymethylene nanocomposites. Polymer Composites, 43 (11). pp. 7845-7858. ISSN 0272-8397

Wong, Keng Yinn and Kang, Hooi Siang and Mohamed Kamar, Haslinda and Hishammuddin, Muhammad Akmal Hakim and Ho, Wai Shin and Tan, Huiyi and Nyakuma, Bemgba Bevan and Lee, Kee Quen and Ho, Xinyou and Wong, Syie Luing and Kek, Hong Yee and Yi, Lee (2022) Small-scale botanical in enhancing indoor air quality: a bibliometric analysis (2011-2020) and short review. Progress in Energy and Environment, 19 . pp. 13-37. ISSN 2600-7762

Wong, Keng Yinn and Tan, Huiyi and Nyakuma, Bemgba Bevan and Mohamed Kamar, Haslinda and Tey, Wah Yen and Hashim, Haslenda and Chiong, Meng Choung and Wong, Syie Luing and Abdul Wahab, Roswanira and Mong, Guo Ren and Ho, Wai Shin and Othman, Mohd. Hafiz Dzarfan and Kuan, Garry (2022) Effects of medical staff's turning movement on dispersion of airborne particles under large air supply diffuser during operative surgeries. Environmental Science and Pollution Research, 29 (54). pp. 82492-82511. ISSN 0944-1344

Xiao, Fei and Yang, Lizhong and He, Lei and Gil, Antoni and Rajoo, Srithar and Zhao, Zhiye and Romagnoli, Alessandro and Cabeza, Luisa F. (2022) Performance enhancement of horizontal extension and thermal energy storage to an abandoned exploitation well and satellite LNG station integrated ORC system. Applied Thermal Engineering, 214 (NA). pp. 1-19. ISSN 1359-4311

Yadav, Devinder Kumar and Kannan, Perumal and Mansor, Shuhaimi (2022) Evaluating an aircraft response to disturbances caused by vibration frequency of wind forces during landing. Journal of Aerospace Technology and Management, 14 . ISSN 1984-9648

Yahaya, Aiman and Samion, Syahrullail (2022) Friction condition of aluminum alloy AA6061 lubricated with bio-lubricant in cold forging test. Industrial Lubrication and Tribology, 74 (4). pp. 378-384. ISSN 0036-8792

Yazdani, Morteza and Torkayesh, Ali Ebadi and Chatterjee, Prasenjit and Fallahpour, Alireza and Montero Simo, Maria Jose and Araque Padilla, Rafael A. and Wong, Kuan Yew (2022) A fuzzy group decision-making model to measure resiliency in a food supply chain: a case study in Spain. Socio-Economic Planning Sciences, 82 (NA). pp. 1-15. ISSN 0038-0121

Yusoff, Muhamad Shakir and Yunus, Nurul Azhani and Muhammad Zaki, Norizatie and Mazlan, Saiful Amri and Abdul Aziz, Siti Aishah and Ubaidillah, Ubaidillah and Nik Ismail, Nik Intan (2022) Comprehensive study on physicochemical characteristics of magnetorheological elastomer featuring epoxidized natural rubber. Smart Materials and Structures, 31 (5). NA. ISSN 0964-1726

Zanurin, A. and Johari, Nor Azmi and Alias, Juliawati and Hassan, Mas Ayu and Redzuan, Norizah and Sudin, Izman (2022) Research progress of sol-gel ceramic coating: a review. In: 2nd Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2021, 20 September 2021, Pekan, Pahang, Malaysia.

Zanurin, A. and Johari, Nor Azmi and Alias, Juliawati and Hassan, Mas Ayu and Redzuan, Norizah and Sudin, Izman (2022) Research progress of sol-gel ceramic coating: a review. Materials Today: Proceedings, 48 (6). pp. 1849-1854. ISSN 2214-7853