Items where Year is 2017

A

Abd. Wahid, M. A. and Megat Mohd. Noor, M. J. and Goto, M. and Sugiura, N. and Othman, N. and Zakaria, Z. and Ahmad Mohammed, T. and Jusoh, A. and Hara, H. (2017) Recombinant protein expression of Moringa oleifera lectin in methylotrophic yeast as active coagulant for sustainable high turbid water treatment. Bioscience, Biotechnology and Biochemistry, 81 (8). pp. 1642-1649. ISSN 0916-8451

Abdul Aziz, S. A. and Mazlan, S. A. and Nik Ismail, N. I. and Choi, S. B. and Ubaidillah, Ubaidillah and Yunus, N. A. B. (2017) An enhancement of mechanical and rheological properties of magnetorheological elastomer with multiwall carbon nanotube. Journal of Intelligent Material Systems and Structures, 28 (20). ISSN 3127-3138

Abdul Halim, I. S. and Kobayashi, F. and Watanabe, M. and Mashiko, K. and Ooi, C. Y. (2017) Small Area Implementation for Optically Reconfigurable Gate Array VLSI: FFT Case. Journal of Scientific & Industrial Research, 76 (11). pp. 697-700. ISSN 0022-4456

Abdul Rabu, S. N. and Mohd. Mahdzir, A. and Aris, B. and Tasir, Z. (2017) Assessing critical thinking skills of faculty of education undergraduate students with MaCTIv4 (Malaysian critical thinking instrument - Version 4). Man in India, 97 (17). pp. 105-119. ISSN 0025-1569

Abdul Rashid, Muhammad Adib and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Ramlan, Nur Atiqah and Mazlan, Nurul Aiyshah and Sugeng, Dhani Avianto (2017) Integration of real-time non-surfactant emulsion fuel system on light duty lorry. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1 - 2 August 2017, Kuantan, Pahang, Malaysia.

Abdul Wahab, A. M. and Rasid, Z. A. and Abu, A. and Mohd. Noor Rudin, N. F. and Yakub, F. (2017) The effect of changing disk parameters on whirling frequency of high speed rotor system. In: 1st AEROS Conference 2017, 12 December 2017, Putrajaya, Malaysia.

Abdullah, Ezzat Chan (2017) Toughness enhancement of zirconia-toughened alumina ceramic composite using multi-phasic additives and microwave heat treatment. PhD thesis, Universiti Teknologi Malaysia.

Abdullah, N. H. and Shameli, K. and Abdullah, E. C. and Abdullah, L. C. (2017) A facile and green synthetic approach toward fabrication of starch-stabilized magnetite nanoparticles. Chinese Chemical Letters, 28 (7). pp. 1590-1596. ISSN 1001-8417

Abdullah, N. H. and Shameli, K. and Etesami, M. and Chan Abdullah, E. and Abdullah, L. C. (2017) Facile and green preparation of magnetite/zeolite nanocomposites for energy application in a single-step procedure. Journal of Alloys and Compounds, 719 . pp. 218-226. ISSN 0925-8388

Adam, A. and Ibrahim, Z. and Mokhtar, N. and Shapiai, M. I. and Cumming, P. and Mubin, M. (2017) Improving EEG signal peak detection using feature weight learning of a neural network with random weights for eye event-related applications. Sadhana - Academy Proceedings in Engineering Sciences, 42 (5). pp. 641-653. ISSN 0256-2499

Adam, A. and Ramlan, N. A. and Jaharudin, N. F. and Hamzah, H. and Othman, M. F. and Mrwan, A. A. G. (2017) Analysis of combustion characteristics, engine performance and exhaust emissions of diesel engine fueled with upgraded waste source fuel. International Journal of Hydrogen Energy, 42 (28). pp. 17993-18004. ISSN 0360-3199

Afzali, A. and Rashid, M. and Afzali, M. and Younesi, V. (2017) Prediction of air pollutants concentrations from multiple sources using AERMOD coupled with WRF prognostic model. Journal of Cleaner Production, 166 . pp. 1216-1225. ISSN 0959-6526

Afzali, A. and Rashid, M. and Saniedanesh, M. (2017) Feasibility of landfill establishment in Khomeynishahr city of Isfahan using GIS, MCE and Boolean logic. Malaysian Journal of Public Health Medicine, 2017 (Specia). pp. 41-47. ISSN 1675-0306

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd. Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling and control of a fixed calliper-based electronic wedge brake. Strojniski Vestnik - Journal of Mechanical Engineering, 63 (3). pp. 181-190. ISSN 0039-2480

Ahmad Khairi, M. H. and Mazlan, S. A. and Ubaidillaha, U. and Ku Ahmad, K. Z. and Choi, S. B. and Abdul Aziz, S. A. and Yunus, N. A. (2017) The field-dependent complex modulus of magnetorheological elastomers consisting of sucrose acetate isobutyrate ester. Journal of Intelligent Material Systems and Structures, 28 (14). pp. 1993-2004. ISSN 1045-389X

Aid, S. R. and Uneme, T. and Wakabayashi, N. and Yamazaki, K. and Uedono, A. and Matsumoto, S. (2017) Carrier activation in Mg implanted GaN by short wavelength Nd:YAG laser thermal annealing. Physica Status Solidi (A) Applications and Materials Science, 214 (10). ISSN 1862-6300

Akhtar, T. and Zahir, A. and Tareq, M. A. H. and Mahdzir, A. M. (2017) The key motivating factors of employee retention: a resource based view. Prabandhan: Indian Journal of Management, 10 (4). pp. 33-48. ISSN 0975-2854

Akter, A. and Goto, M. and Noor, M. J. M. M. and Muzahidul Islam, A. K. M. and Motoo, U. and Ya, Z. Z. and Parvez, A. (2017) Immobilization of heavy metals in tannery sludge by subcritical water treatment. Chemical Engineering Transactions, 56 . pp. 265-270. ISSN 2283-9216

Al Mamoon, I. and Muzahidul Islam, A. K. M. and Ahmed, A. and Baharun, S. and Komaki, S. (2017) Priority aware cognitive radio driven hospital system. Wireless Personal Communications, 96 (4). pp. 5973-5994. ISSN 0929-6212

Al-Masoodi, A. H. H. and Ahmad, F. and Ahmed, M. H. M. and Arof, H. and Harun, S. W. (2017) Q-switched ytterbium-doped fiber laser with topological insulator-based saturable absorber. Optical Engineering, 56 (5). ISSN 0091-3286

Ali, M. S. M. and Leong, L. L. and Ramly, M. N. and Shaikh, S. A. Z. and Muhammad, S. (2017) Utilizing open source software running in inexpensive high performance computing system for cfd applications. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3061-3067. ISSN 1819-6608

Ali, R. R. and Rahman, W. A. W. A. and Kasmaini, R. M. and Ibrahim, N. and Hasbullah, H. and Sadikin, A. N. and Asli, U. A. and Abouzari, E. (2017) Pineapple peel fibre biocomposite: Characterisation and biodegradation studies. Chemical Engineering Transactions, 56 . pp. 1333-1338. ISSN 2283-9216

Alselaa, Ramadan A.M. (2017) Enhance ethylene production from mixed c4 hydrocarbons and light naphtha. PhD thesis, Universiti Teknologi Malaysia.

Amer, Noor Hafizah and Zamzuri, Hairi and Hudha, Khisbullah and Abdul Kadir, Zulkiffli (2017) Modelling and control strategies in path tracking control for autonomous ground vehicles: a review of state of the art and challenges. Journal of Intelligent and Robotic Systems: Theory and Applications, 86 (2). pp. 225-254. ISSN 0921-0296

Amir, H. Tarighaleslami and Timothy, G. Walmsley and Martin, J. Atkins and Michael, R. W. Walmsley and Liew, Peng Yen and James, R. Neale (2017) A unified total site heat integration targeting method for isothermal and non-isothermal utilities. Energy, 119 . pp. 10-25. ISSN 0360-5442

Amiruddin, I. M. and Pauziah, M. and Aminudin, A. and Unuh, M. H. (2017) Design and development of the Macpherson Proton Preve Magneto rheological damper with PID controller. In: 2017 International Conference on Structural, Mechanical and Materials Engineering, ICSMME 2017, 13 - 15 July 2017, Seoul, South Korea.

Ang, C. K. and Tey, W. Y. and Kiew, P. L. and Fauzi, M. (2017) An artificial intelligent approach using fuzzy logic for sleep quality measurement. Journal of Mechanical Engineering, SI 4 (2). pp. 31-47. ISSN 1823-5514

Anuar, N. S. S. and Kassim, A. A. and Utsumi, M. and Iwamoto, K. and Goto, M. and Shimizu, K. and Othman, N. and Zakaria, Z. and Sugiura, N. and Hara, H. (2017) Characterization of musty odor-producing actinomycetes from tropics and effects of temperature on the production of musty odor compounds. Microbes and Environments, 32 (4). pp. 352-357. ISSN 1342-6311

Asako, Y. and Hong, C. (2017) On Temperature Jump Condition for Slip Flow in a Microchannel With Constant Wall Temperature. Journal of Heat Transfer, 139 (7). ISSN 0022-1481

Asako, Yutaka and Faghri, Mohammad (2017) Modification of simple algorithm to handle natural convection flows with zero-isothermal compressibility. International Journal of Heat and Mass Transfer, 106 . pp. 177-182. ISSN 0017-9310

Asako, Yutaka and Hong, Chungpyo (2017) Turbulent temperature profile in the quasi-fully developed region of a micro-tube. Journal of Thermal Science and Technology, 12 (1). pp. 1-12. ISSN 1880-5566

Ayob, Idarahayu (2017) Factors contributing to drone adoption in Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Malaysia-Japan International Institute of Technology.

Aziz, A. M. B. N. and Talib, N. B. A. and Ali, W. M. S. B. W. M. and Ismail, F. (2017) Research methodology in adapting service innovation and competitive advantage in Malaysian telecommunications industry. Advanced Science Letters, 23 (9). pp. 8898-8902. ISSN 1936-6612

Aziz, N. A. and Othman, M. F. (2017) Binary classification using SVM for sick and healthy chicken based on chicken’s excrement image. Pertanika Journal of Science and Technology, 25 (S). pp. 315-324. ISSN 0128-7680

Aziz, N. S. A. and Azmi, M. K. N. and Hashim, A. M. (2017) One-pot green synthesis of highly reduced graphene oxide decorated with silver nanoparticles. Sains Malaysiana, 46 (7). pp. 1083-1088. ISSN 0126-6039

Aziz, S. A. A. and Mazlan, S. A. and Nik Ismail, N. I. and Ubaidillah, Ubaidillah and Khairi, M. H. A. and Yunus, N. A. (2017) Rheological properties of carbon nanotubes-reinforced magnetorheological elastomer. In: International Conference on Science and Applied Science 2016, ICSAS 2016, 19 November 2016, Surakarta, Indonesia.

Azmi, M. Z. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Zakuan, F. R. A. and Zulkepli, K. A. and Ismail, N. H. F. and Zakariya, M. S. (2017) Steering intervention strategy for side lane collision Avoidance. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4265-4269. ISSN 1819-6608

B

Baharudin, N. A. and Fujikawa, C. and Mitomi, O. and Suzuki, A. and Taguchi, S. and Mikami, O. and Ambran, S. (2017) Tapered spot size converter by mask-transfer self-written technology for optical interconnection. IEEE Photonics Technology Letters, 29 (12). pp. 949-951. ISSN 1041-1135

Baharun, Sabariah and Mohammad Yusof, Yudariah and Abdul Rahman, Roselainy and Ismail, Zaleha (2017) Invoking and supporting engineering student mathematical thnking in informal cooperative learning classroom. Sains Humanika, 9 (1-2). pp. 33-38. ISSN 2289-6996

Bahiuddin, I. and Mazlan, S. A. and Imaduddin, F. and Ubaidillah, Ubaidillah (2017) A new control-oriented transient model of variable geometry turbocharger. Energy, 125 . pp. 297-312. ISSN 0360-5442

Bahrain, S. H. K. and Mahmud, J. and Rasid, Z. A. and Madete, J. (2017) Synthesization and microstructural analysis of Arenga pinnata fibres and silicone rubber for new silicone biocomposite material. Journal of Mechanical Engineering, SI 4 (4). pp. 15-30. ISSN 1823-5514

Bukhori, I. and Ismail, Z. H. (2017) Detection of kidnapped robot problem in Monte Carlo localization based on the natural displacement of the robot. International Journal of Advanced Robotic Systems, 14 (4). pp. 1-6. ISSN 1729-8806

Bukhori, I. and Ismail, Z. H. (2017) Performance comparisons of particle-based and similarity measure-based kidnapping detectors in Monte Carlo localization. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2536-2542. ISSN 0975-1033

C

Che Sidik, N. A. and Mahmud Jamil, M. and Aziz Japar, W. M. A. and Muhammad Adamu, I. (2017) A review on preparation methods, stability and applications of hybrid nanofluids. Renewable and Sustainable Energy Reviews, 80 . pp. 1112-1122. ISSN 1364-0321

D

Daud, Zawawi and Abubakar, Mahmoud Hijab and Abdul Kadir, Aeslina and Abdul Latiff, Abdul Aziz and Awang, Halizah and Abdul Halim, Azhar and Marto, Aminaton (2017) Adsorption studies of leachate on cockle shells. International Journal of Geomate, 12 (29). pp. 46-52. ISSN 2186-2990

E

Evers, S. and Yule, C. M. and Padfield, R. and O'Reilly, P. and Varkkey, H. (2017) Keep wetlands wet: the myth of sustainable development of tropical peatlands – implications for policies and management. Global Change Biology, 23 (2). pp. 534-549. ISSN 1354-1013

F

Faried, Miftah and Shameli, Kamyar and Ubaidillah, Ubaidillah and Miyake, Mikio and Hara, Hirofumi and Ahmad Khairudin, Nurul Bahiyah (2017) Green synthesis of silver nanoparticles in biopolymer stabilizer and their application as antibacterial efficacy. In: 1st International Conference on Engineering, Science and Nanotechnology 2016, ICESNANO 2016, 3 - 5 August 2016, Solo, Indonesia.

Fukuda, K. and Morita, T. (2017) Physical model of adhesive wear in early stage of sliding. Wear, 376-37 . pp. 1528-1533. ISSN 0043-1648

G

Ghaderian, Javad and Che Sidik, Nor Azwadi (2017) An experimental investigation on the effect of Al2O3/distilled water nanofluid on the energy efficiency of evacuated tube solar collector. International Journal of Heat and Mass Transfer, 108 . pp. 972-987. ISSN 0017-9310

Ghani, I. A. and Sidik, N. A. C. and Mamat, R. and Najafi, G. and Ken, T. L. and Asako, Y. and Japar, W. M. A. A. (2017) Heat transfer enhancement in microchannel heat sink using hybrid technique of ribs and secondary channels. International Journal of Heat and Mass Transfer, 114 . pp. 640-655. ISSN 0017-9310

Ghani Al-Mashhadani, Ihsan Ali and Che Sidik, Nor Azwadi and Kamaruzaman, Natrah and Yahya, Wira Jazair and Mahian, Omid (2017) The effect of manifold zone parameters on hydrothermal performance of micro-channel heatsink: a review. International Journal of Heat and Mass Transfer, 109 . pp. 1143-1161. ISSN 0017-9310

Ghani Al-Mashhadani, Ihsan Ali and Kamaruzaman, Natrah and Che Sidik, Nor Azwadi (2017) Heat transfer augmentation in a microchannel heat sink with sinusoidal crossmark cavities and rectangular ribs. International Journal of Heat and Mass Transfer, 108 . pp. 1969-1981. ISSN 0017-9310

Goudarzi, Shidrokh and Hassan, Wan Haslina and Anisi, Mohammad Hossein and Soleymani, Seyed Ahmad (2017) Mdp-based network selection scheme by genetic algorithm and simulated annealing for vertical-handover in heterogeneous wireless networks. Wireless Personal Communications, 92 (2). pp. 399-436. ISSN 0929-6212

H

Haris, Hazlihan and Sulaiman, Wadi Harun and Muhammad, Ahmad Razif and Caroline, Livan Anyi and Tan, Sin Jin and Ahmad, Fauzan and Roslan, Md. Nor and Nurul, Rozullyah Zulkepely and Arof, Hamzah (2017) Passively q-switched erbium-doped and ytterbium-doped fibre lasers with topological insulator bismuth selenide (Bi2Se3) as saturable absorber. Optics and Laser Technology, 88 . pp. 121-127. ISSN 0030-3992

Hajalilou, A. and Mazlan, S. A. and Shilan, S. T. and Abouzari Lotf, E. (2017) Enhanced magnetorheology of soft magnetic carbonyl iron suspension with binary mixture of Ni-Zn ferrite and Fe3O4 nanoparticle additive. Colloid and Polymer Science, 295 (9). pp. 1499-1510. ISSN 0303-402X

Hamid, U. Z. A. and Ariff, M. H. M. and Zamzuri, H. and Saito, Y. and Zakaria, M. A. and Rahman, M. A. A. and Raksincharoensak, P. (2017) Piecewise trajectory replanner for highway collision avoidance systems with safe-distance based threat assessment strategy and nonlinear model predictive control. Journal of Intelligent and Robotic Systems: Theory and Applications . pp. 1-23. ISSN 0921-0296 (In Press)

Haron1, N. A. and Raja Soh, R. P. Z. A. and Harun, A. N. (2017) Implementation of building information modelling (Bim) in malaysia: A review. Pertanika Journal of Science and Technology, 25 (3). pp. 661-674. ISSN 0128-7680

Hashim, U. Alyaa and Abu, Aminudin and Zaw, Thiha and Waziralilah, N. Fathiah and Vikneshvaran, T. and Shukor, D. Shakirah (2017) Noise source identification of vacuum cleaner using sound pressure-velocity (PU) probe. International Journal of Mechanical And Production Engineering, 5 (5). pp. 67-70. ISSN 2320-2092

Hasrizam, C. M. and Noor Fawazi, Noor Fawazi (2017) Damage identification based on curvature mode shape using cubic polynomial regression and chebyshev filters. In: Global Congress on Construction, Material and Structural Engineering 2017, GCoMSE 2017, 28 - 29 August 2017, Johor Bahru, Johor. (Unpublished)

Hassan, N. and Zamzuri, H. and Wahid, N. and Zulkepli, K. A. and Azmi, M. Z. (2017) Driver's steering behaviour identification and modelling in near rear-end collision. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 861-868. ISSN 1693-6930

Huda, N. and Mohd., R. and Sultana, N. (2017) Dominant Influence of the Terminal Molecule of PNIPA Chain on Wettability. Sains Malaysiana, 46 (2). pp. 309-315. ISSN 0126-6039

Hussein, Munirah and Yoneda, Kenichi and Othman, Nor'azizi and Zuhaida, Mohd. Zaki and Mohd. Yusof, Mohamed Hilmi (2017) Effects of number of connections and pipe length to the water losses in Melaka. Jurnal Teknologi, 79 (3). pp. 45-59. ISSN 0127-9696

H’ng, Y. M. and Zaki, S. A. and Ahmad, N. H. and Yusup, Y. (2017) A short review on pedestrian wind assessment techniques in urban area. International Journal of Civil Engineering and Geo-Environmental, S. Pub . ISSN 2180-2742

I

Ibragimov, G. and Akhmedov, A. and Izzati, P. N. and Abdul Manaf, N. (2017) Pursuit differential game described by infinite first order 2-systems of differential equations. Malaysian Journal of Mathematical Sciences, 11 (2). pp. 181-190. ISSN 1823-8343

Imaduddin, F. and Mazlan, S. A. and Ubaidillah, Ubaidillah and Idris, M. H. and Bahiuddin, I. (2017) Characterization and modeling of a new magnetorheological damper with meandering type valve using neuro-fuzzy. Journal of King Saud University - Science, 29 (4). pp. 468-477. ISSN 1018-3647

Ishak, I. A. and Ali, M. S. M. and Shaikh Salim, S. A. Z. (2017) Mesh size refining for a simulation of flow around a generic train model. Wind and Structures, An International Journal, 24 (3). pp. 223-247. ISSN 1226-6116

Ismail, F. and Aziz, A. M. N. and Ali, W. M. S. W. M. (2017) Implement service innovation through STOF model towards green economy in automotive industry. Advanced Science Letters, 23 (9). pp. 8903-8906. ISSN 1936-6612

Ismail, M. H. and Ali, M. S. M. and Shaikh, S. A. Z. and Shirakashi, M. and Muhamad, S. (2017) Flow induced vibration of a square cylinder with high scruton number. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3068-3075. ISSN 1819-6608

Ithnin, Ahmad Muhsin and Yahya, Wira Jazair and Fletcher, Jasmine Baun and Abd. Kadir, Hasannuddin (2017) Engine performance and exhaust emission analysis of a single cylinder diesel engine fuelled with water-diesel emulsion fuel blended with manganese metal additives. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1 - 2 August 2017, Kuantan, Pahang, Malaysia.

Izadiyan, Z. and Basri, M. and Fard Masoumi, H. R. and Abedi Karjiban, R. and Salim, N. and Shameli, K. (2017) Modeling and optimization of nanoemulsion containing Sorafenib for cancer treatment by response surface methodology. Chemistry Central Journal, 11 (1). ISSN 1752-153X

J

Jamian, Nor Ruwaida (2017) The influence of moisture and ash content of palm fibre and shell towards particulate emission in palm oil mills. PhD thesis, Universiti Teknologi Malaysia.

Jomehzadeh, Fatemeh and Nejat, Payam and John, Kaiser Calautit and Mohd. Yusof, Mohd. Badruddin and Shaikh Salim, Sheikh Ahmad Zaki and Ben, Richard Hughes and Muhammad Yazid, Muhammad Noor Afiq Witri (2017) A review on windcatcher for passive cooling and natural ventilation in buildings, part 1: indoor air quality and thermal comfort assessment. Renewable and Sustainable Energy Reviews, 70 . pp. 736-756. ISSN 1364-0321

K

Kalantari, K. and Afiffi, A. M. and Salleh, A. and Mohamad, E. N. and Izadiyan, Z. (2017) Evaluation of heavy metals removal by cross-linked (polyvinyl alcohol/ chitosan/magnetic) nano fibrous membrane prepared by electro spinning technique. Desalination and Water Treatment, 98 . pp. 266-275. ISSN 1944-3994

Kalantari, Katayoon and Afiffi, Amalina M. and Salleh, Ariesman and Mohamad, Edzrol Niza and Izadiyan, Zahra (2017) Evaluation of heavy metals removal by cross-linked (polyvinyl alcohol/chitosan/magnetic) nano fibrous membrane prepared by electro spinning technique. Desalination and Water Treatment, 98 . pp. 266-275. ISSN 1944-3994

Kang, Hooi Siang and Tang, Howe Hing and Lee, Kee Quen and Steven, Adelina and Yu, Xiaochuan (2017) Prediction on parametric resonance of offshore crane cable for lowering subsea structures. In: IEEE International Conference on Underwater System Technology: Theory and Applications (USYS) 2016, 2016, Penang, Malaysia.

Kaur, Jesbains (2017) The effects of annealing on microstructural changes for aluminium nitride epitaxial grown on sapphire by transmission electron microscopy. PhD thesis, Universiti Teknologi Malaysia.

Kefayatia, G. H. R. and Che Sidik, Nor Azwadi (2017) Simulation of natural convection and entropy generation of non-newtonian nanofluid in an inclined cavity using buongiorno's mathematical model (part ii, entropy generation). Powder Technology, 305 . pp. 679-703. ISSN 0032-5910

Khalajabadi, Shahrouz Zamani and Abu, Aminudin and Ahmad, Norhayati and Kadir, Mohammed Rafiq Abdul and Ismail, Ahmad Fauzi and Nasiri, Rozita and Haider, Waseem and Redzuan, Norizah (2017) Biodegradable Mg/HA/TiO2 Nanocomposites Coated with MgO and Si/MgO for Orthopedic Applications: A Study on the Corrosion, Surface Characterization, and Biocompatability. COATINGS, 7 (10).

Khalid, M. S. and Songip, A. R. and Abu Bakar, N. and Chua, M. and Musri, M. (2017) An alternative approach of leakage detection in Underground Storage Tank. Journal of Engineering and Applied Sciences, 12 (9). pp. 2347-2351. ISSN 1816-949X (In Press)

Khalid, M. S. and Songip, A. R. and Abu Bakar, N. and Chua, M. and Musri, M. (2017) Understanding perception of fire risk from petrol station's workers. Journal of Engineering and Applied Sciences, 12 (9). pp. 2352-2360. ISSN 1816-949X

Khnder, Abdolbaqi and Mamat, Rizalman and Che Sidik, Nor Azwadi and Wan Hamzah, Wan Azmi and Selvakumar, Selvakumar (2017) Experimental investigation and development of new correlations for heat transfer enhancement and friction factor of bioglycol/water based tio2 nanofluids in flat tubes. International Journal of Heat and Mass Transfer, 108 . pp. 1026-1035. ISSN 0017-9310

Khor, K. X. and Chin, P. J. H. and Yeong, C. F. and Su, E. L. M. and Narayanan, A. L. T. and Abdul Rahman, H. and Khan, Q. I. (2017) Portable and reconfigurable wrist robot improves hand function for post-stroke subjects. IEEE Transactions on Neural Systems and Rehabilitation Engineering, 25 (10). pp. 1864-1873. ISSN 1534-4320

Kogiladas, Thines Raj and Mubarak, N. M. and Nizamuddin, Sabzoi and Sahu, J. N. and Abdullah, Ezzat Chan and Ganesan, P. (2017) Application potential of carbon nanomaterials in water and wastewater treatment: a review. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 116-133. ISSN 1876-1070

Koide, M. and Takahashi, T. and Shirakashi, M. and Salim, S. A. Z. B. S. (2017) Three-dimensional structure of longitudinal vortices shedding from cruciform two-cylinder systems with different geometries. Journal of Visualization, 20 (4). pp. 753-763. ISSN 1343-8875

Komai, Shinobu and Saidi, Hamdani and Nakanishi, Hiroshi (2017) Study on critical success factors estimation in IT system development. Sains Humanika, 9 (1-3). pp. 31-38. ISSN 2289-6996

Krishna, L. S. and Yuzir, A. and Yuvaraja, G. and Ashokkumar, V. (2017) Removal of Acid Blue25 from aqueous solutions using Bengal gram fruit shell (BGFS) biomass. International Journal of Phytoremediation, 19 (5). pp. 431-438. ISSN 1522-6514

L

Latifi, N. and Eisazadeh, A. and Marto, A. and Meehan, C. L. (2017) Tropical residual soil stabilization: A powder form material for increasing soil strength. Construction and Building Materials, 147 . pp. 827-836. ISSN 0950-0618

Lee, K. X. and Shameli, K. and Miyake, M. and Ahmad Khairudin, N. B. B. and Mohamad, S. E. B. and Hara, H. and Mad Nordin, M. F. B. and Yew, Y. P. (2017) Gold nanoparticles biosynthesis: a simple route for control size using waste peel extract. IEEE Transactions on Nanotechnology, 16 (6). pp. 954-957. ISSN 1536-125X

Lee, Kee Quen and Abu, Aminudin and Muhamad, Pauziah and Sahekhaini, Asnizah and Tan, Lit Ken and Kang, Hooi Siang (2017) Prediction of vortex-induced vibration of bare cylinder and cylinder fitted with helical strakes. In: The 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), 2016, China.

Lee, Kee Quen and Tang, Howe Hing and Hooi, Siang Kang and Gang, Ma (2017) Neural-network prediction of riser top tension for vortex induced vibration suppression. In: IEEE International Conference on Underwater System Technology: Theory and Applications (USYS), 2016, Penang, Malaysia.

Liu, Wen Hui and Hashim, Haslenda and Lim, Jeng Shiun and Ab. Muis, Zarina and Liew, Peng Yen and Ho, Wai Shin (2017) Technical & economic evaluation of district cooling system as low carbon alternative in Kuala Lumpur City. Chemical Engineering Transactions, 56 . pp. 529-534. ISSN 2283-9216

Lokman, Muhammad Quisar and Ahmad, Fauzan and Harun, Sulaiman Wadi and Abd. Wahid, M. H. (2017) Q-switched erbium doped fiber laser using antimony telluride-polyvinyl alcohol (Sb2Te3-PVA) as saturable absorber. In: International Conference on Applied Photonics and Electronics 2017 (InCAPE2017), 9 - 10 Aug 2017, Avillion Port Dickson, Negeri Sembilan, Malaysia.

M

M. L., Nurul Hanira and Che Man, H. and Rashid, M. and Chuah, A. L. and Abdullah, A. M. (2017) Pre-treatment of ammonia-nitrogen (NH3 –N) removal from scheduled waste leachate by air stripping. Page 1 Desalination and Water Treatment, 68 . pp. 330-337. ISSN 1944-3994

Manshor, H. and Abdullah, E. C. and Azhar, A. Z. A. and Sing, Y. W. and Ahmad, Z. A. (2017) Microwave sintering of zirconia-toughened alumina (ZTA)-TiO2-Cr2O3 ceramic composite: the effects on microstructure and properties. Journal of Alloys and Compounds, 722 . pp. 458-466. ISSN 0925-8388

Maruai, N. M. and Ali, M. S. M. and Ismail, M. H. and Ihsan, N. A. M. and Sadzli, F. N. H. and Salim, S. A. Z. S. (2017) Wind energy harvesting from wind-induced vibration. Chemical Engineering Transactions, 56 . pp. 451-456. ISSN 2283-9216

Maruai, N. M. and Ali, M. S. M. and Ismail, M. H. and Shaikh, S. A. Z. and Shirakashi, M. and Muhamad, S. (2017) Comparative study on energy extraction from vibrating square cylinder. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2581-2587. ISSN 1819-6608

Mikami, Osamu and Yaacob, Yuzafirah and Baharudin, Nurul Atiqah and Ambran, Sumiaty and Fujikawa, Chiemi (2017) Optical pin interface for 90-deg optical path conversion coupling to Printed Wiring Board. In: 2016 IEEE Region 10 Conference, TENCON 2016, 22 - 25 November 2016, Singapore.

Miyabayashi, K. and Miyake, M. (2017) Metal-Support Interactions of Platinum Nanoparticles Modified with Pyrene-functionalized Alkylamine and Improved Electrocatalytic Activity of Oxygen Reduction Reaction. CHEMISTRY LETTERS, 46 (5). pp. 707-710. ISSN 0366-7022

Mohamad Rashid, Nur Nadhirah and Abdul Aziz, Umar and Aid, Siti Rahmah and Centeno, Anthony and Matsumoto, Satoru and Xie, Fang and Suwa, Akira and Ikenoue, Hiroshi (2017) Comparison of theoretical and experimental analysis of P and Sn co-implantation in germanium. In: 2016 IEEE Industrial Electronics and Applications Conference, IEACon 2016, 20 - 22 November 2016, Kota Kinabalu, Sabah.

Mohamed, H. and Irawati, N. and Ahmad, F. and Ibrahim, M. H. and Ambran, S. and Rahman, M. A. A. and Harun, S. W. (2017) Optical humidity sensor based on tapered fiber with multi-walled carbon nanotubes slurry. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 97-103. ISSN 2502-4752

Mohd. Idrus, N. H. and Musa, M. N. and Yahya, W. J. and Ithnin, A. M. (2017) Geo-Ocean Thermal Energy Conversion (GeOTEC) power cycle/plant. Renewable Energy, 111 . pp. 372-380. ISSN 0960-1481

Mohd. Yakub, Mohd. Fitri and Abu, Aminudin and Mori, Yasuchika (2017) Enhancing the yaw stability and the manoeuvrability of a heavy vehicle in difficult scenarios by an emergency threat avoidance manoeuvre. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 231 (5). pp. 615-637. ISSN 0954-4070

Mohd. Yakub, Mohd. Fitri and Muhamad, Pauziah and Toh, Hoong Thiam and Md. Noor Rudin, Noor Fawazi and Sarip, Shamsul and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki (2017) Enhancing vehicle ride comfort through intelligent based control. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 2016, USA.

Mussa, Z. H. and Al-Qaim, F. F. and Othman, M. R. and Abdullah, M. P. and Latip, J. and Zakria, Z. (2017) Pseudo first order kinetics and proposed transformation products pathway for the degradation of diclofenac using graphite–PVC composite as anode. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 37-44. ISSN 1876-1070

Mussa, Z. H. and Al-Qaim, F. F. and Othman, M. R. and Abdullah, M. P. and Latip, J. and Zakria, Z. (2017) Pseudo first order kinetics and proposed transformation products pathway for the degradation of diclofenac using graphite-PVC composite as anode. Journal of the Taiwan Institute of Chemical Engineers, 72 . pp. 37-44. ISSN 1876-1070

Mustapa, M. S. and Salim, S. A. Z. S. and Ali, M. S. M. and Rijal, H. B. (2017) Investigation of thermal comfort at different temperature settings for cooling in university building. Journal of Mechanical Engineering, SI 4 (4). pp. 123-134. ISSN 1823-5514

N

Naeini, M. M. and Dass, S. B. and Ooi, C. Y. (2017) The design and implementation of a low-power gating scan element in 32/28 nm CMOS technology. Journal of Low Power Electronics and Applications, 7 (2). ISSN 2079-9268

Naeini, M. M. and Dass, S. B. and Ooi, C. Y. and Yoneda, T. and Inoue, M. (2017) An integrated DFT solution for power reduction in scan test applications by low power gating scan cell. Integration, the VLSI Journal, 57 . pp. 108-124. ISSN 0167-9260

Nasef, M. M. and Sithambaranathan, P. and Ahmad, A. and Abouzari lotf, E. (2017) Intensifying radiation induced grafting of 4-vinylpyridine/glycidyl methacrylate mixtures onto poly(ethylene-co-tetrafluoroethylene) films using ultrasound. Radiation Physics and Chemistry, 134 . pp. 56-61. ISSN 0969-806X

Nazmi, N. and Rahman, M. A. A. and Yamamoto, S. I. and Ahmad, S. A. and Malarvili, M. B. and Mazlan, S. A. and Zamzuri, H. (2017) Assessment on stationarity of EMG signals with different windows size during isotonic contractions. Applied Sciences (Switzerland), 7 (10). ISSN 2076-3417

Noor, I. M. M. and Muhamad Kamal, M. A. (2017) Control of wastewater treatment by using the integration MATLAB and labVIEW. Pertanika Journal of Science and Technology, 25 (S). pp. 77-84. ISSN 0128-7680

Noor, N. M. and Othman, R. and Mubarak, N. M. and Abdullah, E. C. (2017) Agricultural biomass-derived magnetic adsorbents: preparation and application for heavy metals removal. Journal of the Taiwan Institute of Chemical Engineers, 78 . pp. 168-177. ISSN 1876-1070

Noor Hisan, Fara Nuur Ain and Saifuzzaman, Ahmad Damdarash and Mohd. Yasak, Hannan Asyraf and Lee, Chen Kai and Bani, Nurul Aini and Mohd. Noor, Norliza and Mohd. Aris, Siti Armiza and Abd. Jalil, Siti Zura and Syed Abdul Rahaman, Sharipah Alwiah and Usman, Sahnius and Abdullah, Haslaile and Mad Kaidi, Hazilah and Muhtazaruddin, Mohd. Nabil and Ishak, Ruzana and Muhammad-Sukki, Firdaus and Abu-Bakar, Siti Hawa (2017) Relationship between demographic characteristics and hand grip measurement of students in UTMKL. Journal of Advanced Research in Applied Mechanics, 29 (1). pp. 9-19. ISSN 2289-7895

Noor Idora, M. S. and Quen, L. K. and Kang, H. S. (2017) Effect of tannin from rhizophora apiculate as corrosion inhibitor for epoxy paint on mild steel. In: 1st International Conference on Applied and Industrial Mathematics and Statistics 2017, ICoAIMS 2017, 8 - 10 August 2017, Kuantan, Pahang, Malaysia.

Norzarini, A. and Kitajima, T. and Feng, Z. and Sha'ban, M. and Azhim, A. (2017) Characterization based on biomechanical properties for meniscus scaffolds by sonication decellularization treatment. Journal of Biomaterials and Tissue Engineering, 7 (3). pp. 223-232. ISSN 2157-9083

Nurhanna, A. A. and Othman, M. F. (2017) Multi-class support vector machine application in the field of agriculture and poultry: a review. Malaysian Journal of Mathematical Sciences, 11 (S). pp. 35-52. ISSN 1823-8343

Nurul Hanir, M. L. and Hasfalina, C. M. and Sani, A. and Rashid, M. (2017) Pre-treatment ammonia removal of scheduled waste leachate with hydrated lime and caustic soda. Jurnal Teknologi, 79 (1). pp. 107-118. ISSN 0127-9696

O

Omairi, A. and Ismail, Z. H. and Danapalasingam, K. A. and Ibrahim, M. (2017) Power harvesting in wireless sensor networks and its adaptation with maximum power point tracking: current technology and future directions. IEEE Internet of Things Journal, 4 (6). pp. 2104-2115. ISSN 2327-4662

Omar, M. Zakaria and Hashim, Aisha-Hassan Abdalla and Hassan, Wan Haslina and Othman, Omran Khalifa and Azram, Mohammad and Goudarzi, Shidrokh and Lalitha, Bhavani Jivanadham and Zareei, Mahdi (2017) State-aware re-configuration model for multi-radio wireless mesh networks. KSII Transactions on Internet and Information Systems, 11 (1). pp. 146-170. ISSN 1976-7277

P

Pang, J. and Theodorou, I. G. and Centeno, A. and Petrov, P. K. and Alford, N. M. and Ryan, M. P. and Xie, F. (2017) Gold nanodisc arrays as near infrared metal-enhanced fluorescence platforms with tuneable enhancement factors. Journal of Materials Chemistry C, 5 (4). pp. 917-925. ISSN 2050-7534

Paramasivam, K. and Rajoo, S. and Romagnoli, A. and Yahya, W. J. (2017) Tonal noise prediction in a small high speed centrifugal fan and experimental validation. Applied Acoustics, 125 . pp. 59-70. ISSN 0003-682X

Parvez, A. and Noor, M. J. M. M. and Motoo, U. and Goto, M. and Muzahidul Islam, A. K. M. and Akter, A. (2017) Recovery of nitrogen & phosphorus from microalgae by subcritical water. Chemical Engineering Transactions, 56 . pp. 271-276. ISSN 2283-9216

Peng, Yen Liew and Wai, Lip Theo and Wan Alwi, Sharifah Rafidah and Jeng, Shiun Lim and Abd. Manan, Zainuddin and Klemes, Jiri Jaromir and Varbanov, Petar Sabev (2017) Total site heat integration planning and design for industrial, urban and renewable systems. Renewable and Sustainable Energy Reviews, 68 . pp. 964-985. ISSN 1364-0321

Pourasl, A. H. and Ahmadi, M. T. and Rahmani, M. and Ismail, R. (2017) Graphene based biosensor model for Escherichia coli bacteria detection. Journal of Nanoscience and Nanotechnology, 17 (1). pp. 601-605. ISSN 1533-4880

Putra, A. W. S. and Yamada, M. and Tsuda, H. and Ambran, S. (2017) Theoretical analysis of noise in erbium doped fiber amplifier. IEEE Journal of Quantum Electronics, 53 (4). ISSN 0018-9197

Putranti, V. and Ismail, Z. H. (2017) Robust-save energy controller on an autonomous underwater vehicle with obstacles avoidance. Indian Journal of Geo-Marine Sciences, 46 (12). pp. 2572-2578. ISSN 0975-1033

Q

Qadir, A. and Abdul Manaf, N. and Abbas, A. (2017) Analysis of the integration of a steel plant in Australia with a carbon capture system powered by renewable energy and NG-CHP. Journal of Cleaner Production, 168 . pp. 97-104. ISSN 0959-6526

R

Rahima, S. K. A. and Hakimi, S. and Yamada, Y. and Michishita, N. (2017) Investigation of pencil and bifurcated beam fed cylindrical dielectric lens antenna for 5G mobile base stations. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 27-32. ISSN 2180-1843

Rahman, A. H. A. and Ariffin, K. A. Z. and Sani, N. S. and Zamzuri, H. (2017) Pedestrian detection using triple laser range finders. International Journal of Electrical and Computer Engineering, 7 (6). pp. 3037-3045. ISSN 2088-8708

Rahman, F. K. and Tareq, M. A. and Yunanda, R. A. and Mahdzir, A. (2017) Maqashid Al-Shari'ah-based performance measurement for the halal industry. Humanomics, 33 (3). pp. 357-370. ISSN 0828-8666

Rahman, F. K. and Tareq, M. A. and Yunanda, R. A. and Mahdzir, A. (2017) Maqashid Al-Shari’ah-based performance measurement for the halal industry. Humanomics, 33 (3). pp. 357-370. ISSN 0828-8666

Rahman, H. A. and Khor, K. X. and Yeong, C. F. and Su, E. L. M. and Narayanan, A. L. T. (2017) The potential of iRest in measuring the hand function performance of stroke patients. Bio-Medical Materials and Engineering, 28 (2). pp. 105-116. ISSN 0959-2989

Rahman, H. A. and Yeong, C. F. and Khor, K. X. and Su, E. L. M. (2017) Important parameters for hand function assessment of stroke patients. Telkomnika (Telecommunication Computing Electronics and Control), 15 (4). pp. 1501-1511. ISSN 1693-6930

Ranjbar, N. and Zaki, S. A. and Yusoff, N. M. and Hagishima, A. (2017) Time series data analysis of household electricity usage during el-nino in Malaysia. Chemical Engineering Transactions, 56 . pp. 379-384. ISSN 2283-9216

Razali, M. N. H. A. and Salim, S. A. Z. S. and Ali, M. S. M. and Ahmad, N. H. (2017) Large-eddy simulation of wind flow within a canyon between modified idealized terraced houses. Journal of Mechanical Engineering, SI 2 (2). pp. 243-253. ISSN 1823-5514

Rojek, T. and Gubler, L. and Nasef, M. M. and Abouzari Lotf, E. (2017) Polyvinylamine-containing adsorbent by radiation-induced grafting of n-vinylformamide onto ultrahigh molecular weight polyethylene films and hydrolysis for CO2 capture. Industrial and Engineering Chemistry Research, 56 (20). pp. 5925-5934. ISSN 0888-5885

Rosli, N. A. I. M. and Rahman, M. A. A. and Balakrishnan, M. and Komeda, T. and Mazlan, S. A. and Zamzuri, H. (2017) Improved gender recognition during stepping activity for rehab application using the combinatorial fusion approach of EMG and HRV. Applied Sciences (Switzerland), 7 (4). ISSN 2076-3417

Rosli, N. A. I. M. and Rahman, M. A. A. and Balakrishnan, M. and Mazlan, S. A. and Zamzuri, H. (2017) The fusion of HRV and EMG signals for automatic gender recognition during stepping exercise. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 756-762. ISSN 1693-6930

Ruthiraan, M. and Abdullah, E. C. and Mubarak, N. M. and Noraini, M. N. (2017) A promising route of magnetic based materials for removal of cadmium and methylene blue from waste water. Journal of Environmental Chemical Engineering, 5 (2). pp. 1447-1455. ISSN 2213-3437

Ruthiraan, M. and Abdullah, E. C. and Mubarak, N. M. and Thines, K. R. (2017) New generation of magnetic microporus material for enhancing route for methylene blue removal from waste water. Journal of Environment and Biotechnology Research, 6 (1). pp. 105-116. ISSN 2455-0833

S

Salleh, S. M. and Ali, M. S. M. and Shaikh, S. A. Z. and Ishak, I. A. and Shirakashi, M. and Muhammad, S. (2017) Aerodynamics characteristics around simplified high speed train model under the effect of crosswinds. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2604-2609. ISSN 1819-6608

Syed Jaapar, S. Z. and Morad, N. A. and Iwai, Y. and Nordin, M. F. M. (2017) Effects of processing parameters in the sonic assisted water extraction (SAWE) of 6-gingerol. Ultrasonics Sonochemistry, 38 . pp. 62-74. ISSN 1350-4177

Safitri, C. and Hassan, W. H. and Goudarzi, S. (2017) Dynamic content management for mobile subscribers: a survey. Advanced Science Letters, 23 (5). pp. 4119-4123. ISSN 1936-6612

Sakti, M. R. P. and Tareq, M. A. and Saiti, B. and Akhtar, T. (2017) Capital structure of Islamic banks: a critical review of theoretical and empirical research. Qualitative Research in Financial Markets, 9 (3). pp. 292-308. ISSN 1755-4179

Salim, H. K. and Padfield, R. (2017) Environmental management system in the food & beverage sector: A case study from Malaysia. Chemical Engineering Transactions, 56 . pp. 253-258. ISSN 2283-9216

Salim, H. K. and Padfield, R. and Yuzir, A. and Mohamad, S. E. (2017) Towards sustainable food production: exploring the opportunities and challenges in Indonesia. Advanced Science Letters, 23 (9). pp. 8505-8510. ISSN 1936-6612

Sanif, M. S. M. and Ali, A. A. and Woon, L. M. and Wah, L. H. and Sheng, D. B. C. and Hashim, A. M. (2017) Transport properties and sensing responses of platinum nanoparticles/graphene structure fabricated by thermal annealing process. Sains Malaysiana, 46 (7). pp. 1119-1124. ISSN 0126-6039

Saris, Nur Najahatul Huda and Hamzah, Azura and Ambran, Sumiaty (2017) Investigation on gain improvement of erbium doped fiber amplifier (EDFA) by using dual pumped double pass scheme. Journal of Advanced Research in Applied Sciences and Engineering Technology, 7 (1). pp. 11-18. ISSN 2462-1943

Shabdin, N. H. and Padfield, R. (2017) Sustainable energy transition, gender & modernisation in rural Sarawak. Chemical Engineering Transactions, 56 . pp. 259-264. ISSN 2283-9216

Shafie, S. and Shihab, H. S. and Ahmad, F. and Ramli, A. R. (2017) Zero-padding in DWT satellite image compression. Pertanika Journal of Science and Technology, 25 (S). pp. 205-214. ISSN 0128-7680

Shaharuddin, N. H. and Ali, M. S. M. and Mansor, S. and Muhamad, S. and Shaikh Salim, Sheikh Ahmad Zaki and Usman, M. (2017) Flow simulations of generic vehicle model SAE type 4 and DrivAer Fastback using OpenFOAM. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 37 (1). pp. 18-31. ISSN 2289-7879

Shapiai, M. I. and Ibrahim, Z. and Adam, A. (2017) Pareto optimality concept for incorporating prior knowledge for system identification problem with insufficient samples. Arabian Journal for Science and Engineering, 42 (7). pp. 2697-2710. ISSN 1319-8025

Sharif, N. M. and Yusoff, N. M. and Salim, S. A. Z. S. and Mahdi, M. A. (2017) Thulium-doped fiber amplifier at near 2000 nm with different pumping scheme. Advanced Science Letters, 23 (6). pp. 5260-5263. ISSN 1936-6612

Shihab, H. S. and Shafie, S. and Ramli, A. R. and Ahmad, F. (2017) Enhancement of Satellite Image Compression Using a Hybrid (DWT–DCT) Algorithm. Sensing and Imaging, 18 (1). ISSN 1557-2064

Shukor, D. Shakirah and Abu, Aminudin and Aziz Wong, Azella and Hashim, U. Alyaa and Waziralilah, N. Fathiah and Vikneshvaran, T. (2017) Active noise cancellation in the rectangular enclosure systems. International Journal of Mechanical And Production Engineering, 5 (5). pp. 71-75. ISSN 2320-2092

Sidik, N. A. C. and Yazid, M. N. A. W. M. and Samion, S. (2017) A review on the use of carbon nanotubes nanofluid for energy harvesting system. International Journal of Heat and Mass Transfer, 111 . pp. 782-794. ISSN 0017-9310

Sithambaranathan, P. and Nasef, M. M. and Ahmad, A. and Ripin, A. (2017) Crosslinked composite membrane by radiation grafting of 4-vinylpyridine/triallyl-cyanurate mixtures onto poly(ethylene-co-tetrafluoroethylene) and phosphoric acid doping. International Journal of Hydrogen Energy, 42 (14). pp. 9333-9341. ISSN 0360-3199

Sivarama Krishna, L. and Soontarapa, K. and Yuzir, A. and Kumar, V. A. and Zuhairi, W. Y. W. (2017) Kaolin-nano scale zero-valent iron composite(K-nzvi): Synthesis, characterization and application for heavy metal removal. Desalination and Water Treatment, 100 . pp. 168-177. ISSN 1944-3994

Sugeng, Dhani Avianto and Mohd. Zahari, Mohamad Fathur Hafeezat and Ithnin, Ahmad Muhsin and Yahya, Wira Jazair (2017) Diesel engine fuel consumption and emission analysis using steam generated non-surfactant water-in-diesel emulsion fuel. In: 4th International Conference on Mechanical Engineering Research, ICMER 2017, 1 - 2 August 2017, Kuantan, Pahang.

Sugihara, Okihiro and Tan, Freddy Susanto and Fujikawa, Chiemi and Mikami, Osamu (2017) Next generation optical interconnection using photonics polymers: Progress of light-induced self-written waveguide. Journal of The Japan Institute of Electronics Packaging, 20 (5). pp. 341-344. ISSN 1343-9677

Suriyanti, S. N. P. and Usup, G. (2017) Morphology and molecular phylogeny of the marine diatom Nitzschia dentatum sp. nov. and N. Johorensis sp. nov. (Bacillariophyceae) from Malaysia. Bangladesh Journal of Plant Taxonomy, 24 (2). pp. 183-196. ISSN 1028-2092

Swarno, H. A. and Zaki, S. A. and Yusup, Y. and Ali, M. S. M. and Ahmad, N. H. (2017) Observation of diurnal variation of urban microclimate in Kuala Lumpur, Malaysia. Chemical Engineering Transactions, 56 . pp. 523-528. ISSN 2283-9216

T

Tijani, H. and Abdullah, N. and Sallis, P. (2017) Impact of (RS)-MCPP herbicide and sulphate on the treatment performance, kinetics and microbial diversity of anaerobic membrane bioreactor. Journal of Environmental Chemical Engineering, 5 (6). pp. 5389-5395. ISSN 2213-3437

Tan, A. C. and Bahar, N. D. and Yahya, W. J. and Ithnin, A. M. (2017) The effect of microbubbles on the reduction of Biochemical Oxygen Demand (BOD) of Palm Oil Mill Effluent (POME). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 32 (1). pp. 9-14. ISSN 2289-7879

Tan, Lit Ken and Ahmad, Tahir and Lee, Kee Quen and Gan, Yee Sian and Tey, Wah Yen and Wong, Wai Kit (2017) Topological basis of flat electroencephalography's state space. Asian Journal of Engineering and Technology, 5 (2). pp. 62-70. ISSN 2321-2462

Tan, Lit-Ken and Ong, Sie-Meng and Lee, Kee-Quen and Gan, Yee-Siang and Goh, Chien-Yong and Tey, Wah-Yen and Su, Kong-Ngien (2017) Principal component analysis on meteorological data in UTM KL. Progress in Energy and Environment, 1 (1). pp. 40-46. ISSN 2600-7762

Tanabalam, Vikneshvaran and Aminnudin, A. and Hashim, Ummu Alya and Waziralilah, Nur Fathiah and Mohd. Shukor, Duriyyah Shakirah and Ahmad, Afham Zulhusmi (2017) Study on numerical analysis of high rise building. International Journal of Advances in Mechanical and Civil Engineering, 4 (3). pp. 51-54. ISSN 2394-2827

Teo, Ming Ting and El-Sayed Nasef, Mohamed Mahmoud and Sithambaranathan, Paveswari (2017) Kinetic investigations of emulsion-and solvent-mediated radiation induced graft copolymerization of glycidyl methacrylate onto nylon-6 fibres. Journal of Radioanalytical and Nuclear Chemistry, 311 (1). pp. 843-857. ISSN 0236-5731

Tharek, A. and Han, B. H. and Mohamad, S. E. and Ibrahim, Z. (2017) Decolourisation of reactive black 5 by Klebsiella pneumoniae isolated from antarctica seawater. Jurnal Teknologi, 79 (7). pp. 107-114. ISSN 0127-9696

Thines, K. R. and Abdullah, E. C. and Mubarak, N. M. (2017) Effect of process parameters for production of microporous magnetic biochar derived from agriculture waste biomass. Microporous and Mesoporous Materials, 253 . pp. 29-39. ISSN 1387-1811

Thines, K. R. and Abdullah, E. C. and Mubarak, N. M. and Ruthiraan, M. (2017) Synthesis of magnetic biochar from agricultural waste biomass to enhancing route for waste water and polymer application: A review. Renewable & Sustainable Energy Reviews, 67 . pp. 257-276. ISSN 1364-0321

Thines, K. R. and Abdullah, E. C. and Mubarak, N. M. and Ruthiraan, M. (2017) In-situ polymerization of magnetic biochar – polypyrrole composite: A novel application in supercapacitor. Biomass and Bioenergy, 98 . pp. 95-111. ISSN 0961-9534

Ting, T. M. and Nasef, M. M. (2017) Modification of polyethylene-polypropylene fibers by emulsion and solvent radiation grafting systems for boron removal. Fibers and Polymers, 18 (6). pp. 1048-1055. ISSN 1229-9197

Ting, T. M. and Nasef, M. M. and Sithambaranathan, P. (2017) Kinetic investigations of emulsion- and solvent-mediated radiation induced graft copolymerization of glycidyl methacrylate onto nylon-6 fibres. Journal of Radioanalytical and Nuclear Chemistry, 311 (1). pp. 843-857. ISSN 0236-5731

Tojo, T. and Ono, O. and Md. Noh, N. B. and Yusof, R. (2017) Interactive tutor robot for collaborative e-learning system. IEEJ Transactions on Electronics, Information and Systems, 137 (10). pp. 1373-1378. ISSN 0385-4221

Tsuji, T. and Shigeru, M. and Hoshina, T. A. and Yoneda, K. and Funazukuri, T. and Morad, N. A. (2017) CO2 solubility in water containing monosaccharides, and the prediction of pH using Peng-Robinson equation of state. Fluid Phase Equilibria, 441 . pp. 9-16. ISSN 0378-3812

U

Ubaidillah, Ubaidillah and Wibowo, A. and Adiputra, D. and Tjahjana, D. D. D. P. and Rahman, M. A. A. and Mazlan, S. A. (2017) Performance prediction of serpentine type compact magnetorheological brake prototype. In: 1st International Conference on Engineering, Science and Nanotechnology 2016, ICESNANO 2016, 3 - 5 August 2016, Solo, Indonesia.

Ubaidillah, Ubaidillah and Yunus, N. A. and Aziz, S. A. A. and Wahab, N. A. A. and Mazlan, S. A. (2017) Rheological properties of a reclaimed waste tire rubber through high-pressure high-temperature sintering. In: 1st International Conference on Engineering, Science and Nanotechnology 2016, ICESNANO 2016, 3 - 5 August 2016, Solo, Indonesia.

V

V-Ghaffari, Babak and Kouhnavard, M. and Elbasiouny, Sherif M. (2017) Mixed-mode oscillations in pyramidal neurons under antiepileptic drug conditions. Plos One, 12 (6). ISSN 1932-6203

W

Wahab, A. M. and Rasid, Z. A. and Abu, A. (2017) Parametric instability of static shafts-disk system using finite element method. In: 2017 5th Asia Conference on Mechanical and Materials Engineering, ACMME 2017, 9 - 11 June 2017, Tokyo, Japan.

Wahab, A. M. and Rasid, Z. A. and Rudin, N .F. M. and Abu, A. (2017) Parametric instability of shafts based on the Nelson’s beam model using finite element method. Advanced Science Letters, 23 (5). pp. 4478-4482. ISSN 1936-6612

Wahid, N. and Zamzuri, H. and Hassan, N. and Rahman, M. A. A. (2017) Potential field based motion planning with steering control and DYC for ADAS. Telkomnika (Telecommunication Computing Electronics and Control), 15 (2). pp. 853-860. ISSN 1693-6930

Wang, L. and Magliocca, E. and Cunningham, E. L. and Mustain, W. E. and Poynton, S. D. and Escudero-Cid, R. and Nasef, M. M. and Ponce González, J. and Bance Souahli, R. and Slade, R. C. T. and Whelligan, D. K. and Varcoe, J. R. (2017) An optimised synthesis of high performance radiation-grafted anion-exchange membranes. Green Chemistry, 19 (3). pp. 831-843. ISSN 1463-9262

Watanabe, S. and Yahya, W. J. and Ithnin, A. M. and Abd. Kadir, H. (2017) Performance and emissions of diesel engine fuelled with water-in-diesel emulsion. Journal of the Society of Automotive Engineers Malaysia (JSAEM), 1 (1). pp. 12-19. ISSN 2600-8092

Waziralilah, N. Fathiah and Abu, Aminudin and Othman, Nor’Azizi and Sone, Sanda Pyae and Hashim, U. Alyaa and Shukor, D. Shakirah and Vikneshvaran, Vikneshvaran (2017) Experimental analysis on structure-borne noise in an enclosure. International Journal of Mechanical And Production Engineering, 5 (5). pp. 76-80. ISSN 2320-2092

Wong, F. R. and Yasui, K. and Hashim, A. M. (2017) Growth of GaN by nitridation of seed/catalyst free electrodeposited Ga-based compound materials on graphene on insulator. Materials Science in Semiconductor Processing, 67 . pp. 98-103. ISSN 1369-8001

Y

Yakub, F. and Sarip, S. and Wijaya, A. A. and Mori, Y. and Mohd. Subha, N. A. (2017) Enhancing of nominal characteristic trajectory following control for motion systems. Journal of Systems Engineering and Electronics, 28 (6). pp. 1221-1235. ISSN 1671-1793

Yap, M. W. and Mubarak, N. M. and Sahu, J. N. and Abdullah, E. C. (2017) Microwave induced synthesis of magnetic biochar from agricultural biomass for removal of lead and cadmium from wastewater. Journal of Industrial and Engineering Chemistry, 45 . pp. 287-295. ISSN 1226-086X

Yatim, N. H. M. and Muhamad, P. and Abu, A. (2017) Conditioned Reverse Path method on frame structure for damage detection. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-4). pp. 49-53. ISSN 2180-1843

Yazid, N. A. M. and Zaini, N. and Chelliapan, S. and Othman, N. and Mohammad, R. and Kamaruddin, S. A. and Nasri, N. S. (2017) Economic and efficiency indicators in non-revenue water (NRW) performance. International Journal of Civil Engineering and Technology, 8 (10). pp. 1419-1431. ISSN 0976-6308

Yew, Y. P. and Shameli, K. and Miyake, M. and Ahmad Khairudin, N. B. and Mohamad, S. E. and Hara, H. and Mad Nordin, M. F. and Lee, K. X. (2017) An eco-friendly means of biosynthesis of superparamagnetic magnetite nanoparticles via marine polymer. IEEE Transactions on Nanotechnology, 16 (6). pp. 1047-1052. ISSN 1536-125X

Yui, Kazuko and Itsukaichi, Yasuhiro and Kobayashi, Takuro and Tsuji, Tomoya and Fukui, Keisuke and Maeda, Kouji and Kuramochi, Hidetoshi (2017) Solid-liquid equilibria in the binary systems of saturated fatty acids or triglycerides (C12 to C18) + hexadecane. Journal of Chemical and Engineering Data, 62 (1). pp. 35-43. ISSN 0021-9568

Yusof, Z. and Rasid, Z. A. (2017) Parametric instability of laminated composite plates using third order shear deformation theory. Advanced Science Letters, 23 (5). pp. 4434-4438. ISSN 1936-6612

Yusuf, Mohammed and Ali Khan, Moonis and Otero, Marta and Abdullah, E. C. and Hosomi, Masaaki and Terada, Akihiko and Riya, Shohei (2017) Synthesis of CTAB intercalated graphene and its application for the adsorption of AR265 and AO7 dyes from water. Journal of Colloid and Interface Science, 493 . pp. 51-61. ISSN 0021-9797

Yuzir, A. and Sabri, A. and Tijani, H. and Abdullah, N. and Shreeshivadasan, C. (2017) Qualitative methods to identify potential strains for partial degradation of oil palm mesocarp fibre. Desalination and Water Treatment, 89 . pp. 280-286. ISSN 1944-3994

Yuzir, A. and Yaacob, S. S. and Tijani, H. I. and Abdullah, N. and Ahmed, Z. (2017) Addition of ferric chloride in anaerobic digesters to enhance sulphide removal and methanogenesis. Desalination and Water Treatment, 79 . pp. 64-72. ISSN 1944-3994

Z

Zuikafly, Siti Nur Fatin and Ahmad, Fauzan and Ibrahim, Mohd. Haniff and Harun, Sulaiman Wadi (2017) Passively Q-switched of EDFL employing multi-walled carbon nanotubes with diameter less than 8 nm as saturable absorber. In: 2017 International Conference on Applied Photonics and Electronics, InCAPE 2017, 9 - 10 August 2017, Port Dickson, Negeri Sembilan, Malaysia. (Submitted)

Zahar, Marziah (2017) Marine microbial diversity of off-Terengganu coastal sediment in South China Sea. PhD thesis, Universiti Teknologi Malaysia.

Zainal, N. A. and Kamarudin, M. R. and Yamada, Y. and Seman, N. (2017) Radiation pattern performance of unequally linear arrays with parasitic element. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 110-115. ISSN 2502-4752

Zakeri, M. and Abouzari-lotf, E. and Miyake, M. and Mehdipour-Ataei, S. and Shameli, K. (2017) Phosphoric acid functionalized graphene oxide: a highly dispersible carbon-based nanocatalyst for the green synthesis of bio-active pyrazoles. Arabian Journal of Chemistry . ISSN 1878-5352 (In Press)

Zakeri, M. and Nasef, M. M. and Kargaran, T. and Ahmad, A. and Abouzari Lotf, E. and Asadi, J. (2017) Synthesis of pyrano2,3-cpyrazoles by ionic liquids under green and eco-safe conditions. Research on Chemical Intermediates, 43 (2). pp. 717-728. ISSN 0922-6168

Zakeri, M. and Nasef, M. M. and Kargaran, T. and Ahmad, A. and Abouzari-Lotf, E. and Asadi, J. (2017) Synthesis of pyrano[2,3-c] pyrazoles by ionic liquids under green and eco-safe conditions. Research on Chemical Intermediates, 43 (2). pp. 717-728. ISSN 0922-6168

Zaki, S. A. and Damiati, S. A. and Rijal, H. B. and Hagishima, A. and Abd. Razak, A. (2017) Adaptive thermal comfort in university classrooms in Malaysia and Japan. Building and Environment, 122 . pp. 294-306. ISSN 0360-1323

Zaki, S. A. and Hagishima, A. and Fukami, R. and Fadhilah, N. (2017) Development of a model for generating air-conditioner operation schedules in Malaysia. Building and Environment, 122 . pp. 354-362. ISSN 0360-1323

Zakuan, F. R. A. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Ismail, N. H. F. and Zakariya, M. S. and Zulkepli, K. A. and ZulfaqarAzmi, M. (2017) Threat assessment algorithm for Active Blind Spot Assist system using short range radar sensor. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4270-4275. ISSN 1819-6608

Zareei, M. and Muzahidul Islam, A. K. M. and Baharun, S. and Vargas Rosales, C. and Azpilicueta, L. and Mansoor, N. (2017) Medium Access Control Protocols for Cognitive Radio Ad Hoc Networks: A Survey. Sensors (Switzerland), 17 (9). ISSN 1424-8220

Zulkepli, K. A. and Zamzuri, H. and Rahman, M. A. A. and Yahya, W. J. and Zakaria, M. A. and Azmi, M. Z. and Zakuan, F. R. A. and Ismail, N. H. F. and Zakariya, M. S. (2017) I-Drive: Modular system architecture and hardware configuration for an intelligent Vehicle research platform. ARPN Journal of Engineering and Applied Sciences, 12 (14). pp. 4259-4264. ISSN 1819-6608