Items where Year is 2005

A

A. Bakar, S. Anuar (2005) Ride performance evaluation of a semi-active magnetorheological suspension system on a full car model. In: 2nd Int. Conf. on Mechatronics (ICOM 05), 10-12 May 2005, Hotel Pan Pacific, Kuala Lumpur, Malaysia.

A. Khan, Zahid and Kamaruddin, S. and Quadir, G. A. and Suhail, A. and Seetharamu, K. N. (2005) Application of artificial neural network (AAN) for prediction of sensible and latent heat losses from a cow. Jurnal Mekanikal (20). ISSN 0127-3396

A. R., Ariffin (2005) Computer-Aided Reprocessability Indes (CARPI) system for rotational and prismatic parts. In: Seminar Kebangsaan Komputeran Industri, 2005, na.

A. R., Ariffin (2005) Spreadsheet Analysis System (SAS) for the DfA house methodology. In: Seminar Kebangsaan Komputeran Industri, 2005, na.

Abd. Hamid, Mohd. Hanifa K. (2005) Diskrepansi nilaian pampasan tanah untuk maksud awam : kajian kes : pengambilan tanah untuk tapak kampus Kolej Universiti Teknikal Kebangsaan Malaysia, Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahim, Erween (2005) Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahim, Shayfull Zamree (2005) Analyses of material flow in two and three - plate molds for mold design selection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abd. Rahman, Roslan and Kamsah, Nazri and Abd. Latif, Zulkarnain (2005) Utilisation of noise suppression techniques in the development of two-stroke, stratified-charge, lean-burn gasoline engines. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdelraheem Elhaj, Hazir Farouk (2005) Effect of adopting different dispatching rules on the mean flow time in a two machine batch-shop problem. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Aziz, Azhar and Lim, Chon Wei (2005) Development and performance evaluation of a prototype electric hybrid powertrain system for automotive applications. The Journal of The Institution of Engineers, Malaysia, 66 (1). pp. 73-80. ISSN 0126-513X

Abdul Aziz, Azhar and Suhadi, Mohd. Sairaji and Mohd. Noor, Alias and Abdullah, Abu Hassan and Tawi, Kamarul Baharin and Abu Bakar, Rosli (2005) The design and development of a new twostroke (125 Cc) stratified-charge, lean-burn air-cooled engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Ghani, Mohamad Pauzi and Ahmad Sabki, Ahmad Fuaad (2005) Investigation of wake wash in the towing tank. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abdul Rahman, Ahmad Syayuthi (2005) Pengujian retakan kakisan tegasan dan pencirian spesimen aluminium 6063. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdul Raman, Norazmein (2005) Strategi pembuatan produk untuk permintaan dinamik di dalam baris pengeluaran bersiri. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Abdullah, Haryati and Ani, Farid Nasir and Mohd. Jaafar, Mohammad Nazri (2005) Combustion characteristics study of biomass in a fluidized bed combustor. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Abu Bakar, A R. and Hamid, M K A and Zakaria, K (2005) Simulasi tekanan sentuhan dinamik bagi brek cakera menggunakan kaedah unsur terhingga.". Proceedings of Computational & Experimental Mechanics . pp. 287-296.

Abu Bakar, A. R. and Ouyang, H. and Titeica, D. and Hamid, M. K. A. (2005) Modelling and Simulation of Disc Brake Contact Analysis and Squeal. Seminar on Advances in Malaysian Noise Vibration and Comfort (NVC 2005) .

Abu Bakar, Abd. Rahim and Ouyang, Huajiang (2005) Prediction of disc brake contact pressure distributions by finite element analysis. Jurnal Teknologi A (43A). pp. 21-36. ISSN 0127-9696

Abu Bakar, Abd Rahim and Huajiang, Ouyang (2005) Prediction Of Disc Brake Contact Pressure Distributions By Finite Element Analysis. Jurnal Teknologi A (35A). pp. 113-124. ISSN 0127-9696

Abul Hossain, Khandoker and Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Ani, Farid Nasir (2005) Application of commercial grade ammonia liquor in the selective non–catalytic reduction of nox in combusted gas from a diesel burner. Application of commercial grade ammonia liquor in the selective non–catalytic reduction of nox in combusted gas from a diesel burner . pp. 107-118. ISSN 0127-118

Ahdi, Hassanazhari (2005) Numerical analysis of convective heat transfer in a triangular duct with radiation boundary conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, Rozie Nani (2005) Development of spreadsheet analysis (SAS) for DFA house methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ahmad, S. N. and Hashim, J. and Ghazali, Masitah I. (2005) The effects of porosity on mechanical properties of cast discontinuous reinforced metal-matrix composite. Journal of Composite Materials, 39 (5). pp. 451-466. ISSN 0021-9983

Alasso, Ahmed Omar (2005) A model for implementation of preventive maintenance management programs in construction project equipment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Alias, Amran and Mat Rejab, Mohd. Ruzaimi and Mohamad, Mohd. Radzai and Md. Akil, Hazizan and Ahmad Nor, Nor Azlan (2005) Behaviour of circular sandwich panel under dynamic loading. Jurnal Mekanikal (20). pp. 96-111. ISSN 0127-3396

Alias, Amran and Mat Rejab, Mohd. Ruzaimi and Mohamad, Mohd Radzai and Md. Akil, Hazizan and Ahmad Nor, Nor Azlan (2005) Behaviour of circular sandwich panel under static loading. Jurnal Mekanikal (20). pp. 78-95. ISSN 0127-3396

Amrin, Astuty (2005) High-Temperature Oxidation Of Titanium Aluminides. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Andalas, Ronny (2005) Application of accuracy control system in Batam shipyard. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ani, Farid Nasir and Badawi, E.M and Kannan, K.S (2005) The Effect of Absorber Packing Height on the Performance of a Hybrid Liquid Desiccant System. Renewable Energy, 30 (15). pp. 2247-2256. ISSN 09601481

Ani, Farid Nasir (2005) Performance investigation of energy transport media as influenced by crop based properties. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Ani, Farid Nasir and Wan Ali, Wan Khairuddin and Yusof, Ahmad Anas (2005) Effect of oil palm shell carbon–polyester resin composite on microwave absorber properties. Jurnal Mekanikal (19). pp. 1-10. ISSN 0127-3396

Appalanidu, Kiran Babu (2005) Development of low emission oil burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ariffin, Mohd. Kamal (2005) Termodinamik asas. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0392–X

Ashrul Ishak, Mohamad Shaiful and Mohd. Jaafar, Mohammad Nazri (2005) The effect of swirl number on reducing emissions from liquid fuel burner system. Jurnal Mekanikal (19). pp. 48-56. ISSN 0127-3396

Awang, Muhamad Khairudin (2005) Prediction of noise radiation on cylinder head. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

B

Bambang, Pramudono (2005) Study On Emulsion Stability And Chemical Demulsification Characteristics Of Crude Oil Emulsion. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Basharie, Siti Mariam (2005) Performance modelling of refrigerants in a vapor compression refrigeration cycle. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

C

Cheng, Eng Cong and Velautham, Sanjayan and Darus, Amer Nordin (2005) Solar thermal organic Rankine cycle as a renewable energy option. Jurnal Mekanikal (20). pp. 68-77. ISSN 0127-3396

Cheng, Chin Fook (2005) Numerical study of acoustic waves in a rectangular chamber with binary gas mixtures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Chin, Doris Chong Leng (2005) A reliability analysis of a Malaysia jacket platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Choo, Shinn Chei (2005) Technoeconomical analysis of a residential photovoltaic vapour compression air conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Cong, Cheng Eng and Velautham, Sanjayan and Darus, Amer Nordin (2005) Solar thermal organic rankine cycle as a Renewable energy option. Solar thermal organic rankine cycle as a (20). pp. 68-77.

D

Daud, Mohd. Fadzil and Hanafiah, Khairul Anwar (2005) Panduan asas lukisan kejuruteraan edisi kedua. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0381–4

E

E., Rathakrishnan and Ramli, Yahaya (Penterjemah) and Mohd. Jaafar, Mohammad Nazri (Penterjemah) and Abu Bakar, Rosli (Penterjemah) (2005) Dinamik gas (ITNMB – UTM). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0358–X

Elbuni, Nureddin Mohamed (2005) Resistance analysis of pusher barge system in calm water and in waves. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

G

Gan, Leong Ming (2005) The development of a new blower assisted scavenging system for two stroke petrol engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gomez, Kenneth Brian (2005) Impact analysis of fibreglass reinforced composites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gouda Mahfouz, Hamdy Abd. El Rahman (2005) Analytical and experimental analysis on scroll compressor for automobile air conditioning system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

H

Hamzah, E. and Suardi, K. and Ourdjini, Ali (2005) ffect of microstructures on the hydrogen attack to gamma titanium aluminide at low temperature. Materials science & engineering. A, Structural materials : properties, microstructure and processing , 397 . pp. 41-49. ISSN 0921-5093

Hamzah, Esah and Kanniah, Maiiyeaalagan (2005) Corrosion Behavior of low carbon steel sheets for car bodies. Jurnal Mekanikal (19). pp. 57-70. ISSN 0127-3396

Hamzah, Esah and Kanniah, Maiiyeaalagan and Harun, Mohd. (2005) Microstructural characterisation of As-Cast Binary near gamma titanium aluminides. Jurnal Teknologi A (43A). pp. 113-124. ISSN 0127-9696

Hamzah, Esah and Suardi, K. and Ourdjini, Ali (2005) Effect of microstructures on the hydrogen attack to gamma titanium aluminide at low temperature. Materials Science and Engineering A, 397 . pp. 41-49. ISSN 09215093

Hamzah, Halim Shah (2005) Application of statistical process control (SPC) to the production system of an automotive manufacturing plant's welding shop in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Harun, Mohd. Ruzi (2005) Part combination of design for assembly using Effort Flow Analysis (EFA). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hassan, Adnan and Mohd. Shaharoun, Awaluddin and Oktaviandri, Muchamad (2005) Dynamic scheduling in a multi-product manufacturing system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Hilmi, Ahmad Humaizi (2005) Design and analysis of a paintball marker using boothroyd - dewhurst DFMA methodology. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hossain, K. A. and Mohd. Jaafar, M. N. and Appalanide, K. B. and Mustafa, A. and Ani, F. N. (2005) Application of urea based SNCR system in the combustion effluent containing low level of baseline nitric oxide. Enviromental Technology Selper Ltd, 26 (3). pp. 251-260. ISSN 0959-3330

Hudha, Khisbullah (2005) Non-parametric modeling and modified hybrid skyhook groundhook control of magnetorheological dampers for automotive suspension system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussain, Zuhailawati and Koay, Han Keong (2005) Studies on alumina dispersion-strengthened copper composites through ball milling and mechanical alloying method. Jurnal Teknologi A (43A). pp. 1-20. ISSN 0127-9696

Hussain, A. and Ani, F. N. and Darus, A. N. and Mustafa, A. and Salema, A. A. (2005) Simulation studies of gas-solid in the riser of a Circulating Fluidized Bed. In: Proceedings of the 18th International Conference on Fluidized Bed Combustion.

I

Idris, Jamaliah and Nee, N. J. (2005) The effect of Sol-Gel technique on the aluminium-SiCp composite. Jurnal Mekanikal (19). pp. 11-21. ISSN 0127-3396

Idroas, Mohamad Yusof (2005) Gasification of paddy husk using cyclone gasifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Irwan Ibrahim, Mohd. Halim (2005) The effect of buckling in frp members. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ishak, Mohamad Shaiful Ashrul (2005) Pembangunan pembakar berbahan api cecair dengan ciri-ciri rendah NOx. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

J

Jolyn, Soo (2005) 3D laser scanning system for hull form surface reconstruction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

K

K. , Hudha and Jamaluddin, H. and Samin, P. M. and Rahman, R. A. (2005) Effects of control techniques and damper constraint on the performance of a semi-active magnetorheological damper. International Journal of Vehicle Autonomous Systems, 3 (2 - 4). pp. 230-252. ISSN 1471-0226

K., Hudha and H., Jamaluddin and P. M., Samin and R. A., Rahman (2005) Non-parametric linearised data driven modelling and force tracking control of a magnetorheological damper. International Journal of Vehicle Autonomous Systems , 3 (2, 3, 4). pp. 230-252.

K. Mandal, Nirmal and Leong, M. Salman and Abd. Rahman, Roslan (2005) A new strategy for far-field power transmission in outhotropic plates. In: 12th Asia-Pasific Vibration Conference, 6-9 August, 2005, Langkawi, Malaysia.

Kamarudin, Kamarul-Azhar (2005) Air staging combustion and emission from oil burner. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Kathanathan, Vijaynathan (2005) Computer assisted optimisation method for Malaysian fishing boats. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

L

Lee, Yuk Choi (2005) A study on simulated rainfall noise generation and prediction of rain noise for composite roof constructions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Liew, Kuok Jew (2005) Numerical method heat transfer analysis in annular sector ducts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lim, Boon Han and Mailah, Musa (2005) Intelligent biometric signature verification system incorporating neural network. Jurnal Mekanikal (20). pp. 22-41. ISSN 0127-3396

Lim, Boon Han (2005) Biometric signature verification using neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M

M. Rahuma, Fouzi Khalifa (2005) Development of ocean current turbine for power generation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa and Poh, Yang Liang (2005) Development of a software for simulating active force control schemes of a two-link planar manipulator. Jurnal Teknologi (A), 43 (A). pp. 49-72. ISSN 0127-9696

Mailah, Musa and Poh, Yang Liang (2005) Development of a software for simulating active force control schemes of a two–link planar manipulator. Jurnal Teknologi A, 43 . pp. 49-74. ISSN 0127-9696

Mailah, Musa and Jamaluddin, Hishamuddin and Pitowarno, Endra and Purnomo, Didik Setyo (2005) Intelligent material handling mobile robot for industrial purpose with active force control capability. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Mandal, Nirmal Kumar and Abd Rahman, Roslan and Leong, M.Salman (2005) Experimental investigation of vibration power flow in thin technical orthotropic plates by the method of vibration intensity. Journal of Sound and Vibration, 285 . pp. 669-695.

Manshoor, Bukhari (2005) Incompressible flow simulation using S.I.M.P.L.E method on parallel computer. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Sarip, Abdul Rahim (2005) Kajian secara teori dan ujikaji terhadap pemampat ram gelangsar berputar. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Md. Fauadi, Muhammad Hafidz Fazli (2005) Information requirements for mould making in a job shop manufacturing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Meftah sufelgin, Atef Salem (2005) Manoeuvring of pusher-barge in deep and shallow water conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Meng, Hee Lim and Leong, Salman (2005) Diagnosis for loose blades in gas turbines using wavelet analysis. Journal of Engineering for Gas Turbine and Power, 127 (2). pp. 314-322. ISSN 0742-4795

Mohamad Jaya, Abdul Syukor (2005) Computer based training for computer numerical control turning process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri and Azeman, Mustafa and Hamidon, Musa and Wan Zaidi, Wan Omar and Mohd. Zamri, Yusoff and Kamsani, Abdul Majid and Mohamad Shaiful Ashrul, Ishak (2005) Development of low liquid fuel Burnera. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mohd. Jaafar, Mohammad Nazri and Mustafa, Azeman and Musa, Hamidon and Senawi, Yusof and Wan Omar, Wan Zaidi and Abdul Majid, Kamsani and Mohamad Shaiful Ashrul, Ishak (2005) Pembangunan teknik kawalan pencemaran menggunakan pembakar berbahan api cecair dengan aliran berpusar. Project Report. Faculty of Mechanical Engineering, Skudai, Johor. (Unpublished)

Mohd. Jaafar, Mohammad Nazri and Samat, Ismail and Abdul Mookmin, Muhamed Shukri (2005) Kajian perbandingan ram lengkung dan ram rata bagi pemusar udara aliran jejarian dalam mengurangkan emisi. The Journal of the Institution of Engineers, Malaysia, 66 (4). pp. 57-63. ISSN 0126-513X

Mohd. Jaafar, Mohammad Nazri and Sulian, Mohd Sharul (2005) Keberkesanan pembakaran udara berperingkat dalam mengurangkan emisi dari pembakar berbahanapi gas. The Journal of The Institution of Engineers, Malaysia, 66 (3). pp. 33-37. ISSN 0126-513X

Mohd. Jaafar, Mohammad Nazri (2005) Jenis enjin pesawat udara dan analisis kitar. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0376–8

Mohd. Jaafar, Mohammad Nazri and Abdul Wahid, Mazlan and Mustafa, Azeman and Ishak, Mohamad Shaiful Ashrul (2005) Combustion characteristic of air staging in gas burner system. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Noor, Alias and Abu Bakar, Rosli and Abdul Aziz, Azhar and Abdul Latif, Zulkarnain and Mohd. Rohani, Jafri and Saat, Aminuddin (2005) Design and development of auxiliary components for a new two-stroke, stratified-charge, lean-burn gasoline engine. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Mohd. Shaffiar, Norhashimah (2005) Computer-aided garment pattern making-3D enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohideen Batcha, Mohd. Faizal (2005) Design and development of new multi-vane rotary compressor for automobile air-conditioning system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohmad Jaat, Md. Norrizam (2005) The application of exergy analysis on an educational steam power plant. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mubarak, A. and Hamzah, Esah and Toff, M. R. M. (2005) Review of physical vapour deposition (PVD) techniques for hard coating. Jurnal Mekanikal (20). pp. 42-51. ISSN 0127-3396

Mugeneswaran Shanmugam, S. (2005) Development of activity - based costing (ABC) model in demanufacture cost assesments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

N

Ng, Chee Weng (2005) Mechanism-based reliability model for electronic packages. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ng, Soon Hwa (2005) Simulation of heat transfer in microchannel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ngali, Mohd. Zamani (2005) Solution to navier-stokes equation in stretched coordinate system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Norhan, Norazizone (2005) The manufacture of hip implant component using advanced manufacturing techniques. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Noviyarsi, Noviyarsi (2005) Development of a proposed quality engineering (QE) implementation framework for Malaysian automotive suppliers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

O

Omer Alsaghir, Albashir Ali (2005) Utilization of synthetic aperture radar (SAR) data for ship detection. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

R

Ramasamy, Arulmaran (2005) Facility planning for a container port using simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Ramasamy, Devarajan (2005) Development of a compressed natural gas (CNG) mixer for a two stroke internal combustion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering : Mechanical.

Ramli, Yahaya (Penterjemah) (2005) Hidraulik dan pneumatik: panduan jurutera dan juruteknik (ITNMB – UTM). Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0360–1

Rival, Rival (2005) Electrical discharge machining of titanium alloy using copper tungsten electrode with SiC powder suspension dielectric fluid. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

S

S. Sabeyga, Saad Ali (2005) Investigative study on oil pollution in the mediterranean sea and libyan coastline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sa'ude, Nasuha (2005) Development of computer aided reprocessability index (CARPI) system for rotational parts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Salehun, Md Amirul Khair and Md. Tap, Masine and Mohamed Shaharoun, Awaluddin (2005) Guideline for improving capacity of a job shop based on selected performance measures. Jurnal Teknologi A (43A). pp. 87-104. ISSN 0127-9696

Samat, Ismail and Mohd. Jaafar, Mohammad Nazri (2005) Kelebihan Pemusar Udara Ram Lengkung Berbanding Ram Rata Dalam Mengurangkan Emisi. Jurnal Teknologi F (42F). pp. 89-106. ISSN 0127-9696

Sarmani, Yatimah (2005) Pendekatan kaunseling Islam : satu analisis kualitatif model kaunseling berasaskan sifat-sifat manusia oleh Imam Al-Ghazali. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sawawi, Marini (2005) Evaluation of adhesive epoxy materials in a composite/concrete system under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sekharan, Gopal and Mohd. Rohani, Jafri and Mohd. Yusof, Sha'ri and Abu Bakar, Zailis (2005) Optimization Of Solder Paste Printing Parameters Using Design Of Experiments (DOE). Jurnal Teknologi A (43A). pp. 11-20. ISSN 0127-9696

Shamsudin, Shamsul Anuar (2005) Mechanical and thermodynamics analyses of the two-stroke swivel motion engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shanmugam, Bharanidhran and Idris, Norbik Bashah (2005) Artificial intelligence techniques applied to intrusion detection. In: Proceedings of INDICON 2005: An International Conference of IEEE India Council. IEEE, pp. 52-55.

Sin, Kwan Leong (2005) The effect of incoparating swirl devices at intake port on the performance of compressed natural gas (CNG) engine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Suardi, Khairmen (2005) The effect of heat treatment and chromium addition on γ-titanium aluminide resistance to hydrogen attack. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Sulaiman, Suditama and Megat Ahmad, Megat Mohamad Hamdan and Sulaiman, Shamsuddin and Adam, Normariah (2005) Heat transfer study in the low temperature thermal energy storage material (multi-component material) between tubes array during melting. Jurnal Mekanikal (19). pp. 71-83. ISSN 0127-3396

Surjosatyo, Adi and Ani, Farid Nasir (2005) Experimental and prediction of the development of low-calorific swirl burner. International Energy Journal, 6 (2). ISSN 1513-718X

Suroso, Arief (2005) Hydraulic model test of wave energy conversion. Jurnal Mekanikal (19). pp. 84-94. ISSN 0127-3396

T

Taib, Mohd. Yusof (2005) Design and development of rotating-sleeve refrigerant compressor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Tamin, M N and Liew, Y B (2005) Numerical modeling of cyclic stress-strain behavior Of sn-pb solder joint during thermal fatigue. National Seminar on Computational & Experimental Mechanics (CEM) 2005 . pp. 351-360.

Tamin, M. N. and Liew, Y. B. and Wagiman, A. N. R. and Loh, Y. K. (2005) Solder joint fatigue in a surface-mount assembly subjected to mechanical loading. In: Proceedings of 7th Electronics Packaging Technology Conference, EPTC 2005 .

Tan, Chun Chai (2005) A numerical analysis of fixed offshore structure subjected to environmental loading in Malaysian water. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Toh, C. L. and Idris, Nik Rumzi and Yatim, Abdul Halim and Muhammad, N. D. and Elbuluk, M. E. (2005) Implementation of a New Torque and Flux Controllers for Direct Torque Control (DTC) of Induction Machine Utilizing Digital Signal Processor (DSP) and Field Programmable Gate Arrays (FPGA). The 36th IEEE Conference on Power Electronics Specialists . pp. 1594-1599.

V

Velautham, Sanjayan and Abdul Aziz, Azhar and Mohd. Ghazali, Normah (2005) Renewable energy powered organic ranking cycle. Project Report. Universiti Teknologi Malaysia, Universiti Teknologi Malaysia. (Unpublished)

Venkatesh, V. C. and Izman, S. and Vichare, P. S. and Mon, T. T. and Murugan, S. (2005) The novel bondless wheel, spherical glass chips and a new method of aspheric generation. Journal of Materials Processing Technology, 167 (2-3). pp. 184-190. ISSN 0924-0136

W

Wan Ali, Wan Khairuddin and Abd. Rahman, Tharek (2005) Wideband microstrip antenna for land based vehicles. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Hamid, Wan Harun and Mohd. Rohani, Jafri (2005) The study on the integration of Activity Based Costing (ABC) system and six-sigma principle. Project Report. Universiti Teknologi Malaysia. (Unpublished)

Wan Nik, W. B. and Ani, F. N. and Masjuki, H. H. (2005) Thermal stability evaluation of palm oil. Energy Conversion and Management, 46 . pp. 2198-2215. ISSN 0196-8904

Wan Nik, W. B. and Ani, F. N. and Masjuki, H. H. (2005) Thermal stability evaluation of palm oil as energy transport media. Energy Conversion and Management, 46 . pp. 2198-2215. ISSN 0196-8904

Wan Nik, Wan Mohd. Norsani (2005) Performance investigation of RBD palm oil as hydraulic fluid using bench tests and hydraulic test RIG. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wan Nik, Wan Mohd. Norsani (2005) Thermal And Rheological Properties Of Palm Based Oil As Hydraulic Fluid. PhD thesis, Universiti Teknologi Malaysia, Mechanical Engineering.

Wan Nik, W. B. and Ani, Farid Nasir and Masjuki, H. H. and Eng Giap, S. G. (2005) Rheology of bio-edible oils according to several rheological models and its potential as hydraulic fluid. Industrial Crops and Products, 22 (3). pp. 249-255. ISSN 0926-6690

Wijaya, Moh. Lutfi (2005) Modelling and control of an intelligent antilock braking system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Wong, Kuan Yew (2005) The potential roles of engineers in knowledge management: an overview. Jurutera, November . pp. 26-29. ISSN 0126-9909

Wong, Kuan Yew and Aspinwall, Elaine (2005) An empirical study of the important factors for knowledge-management adoption in the SME sector. Journal of Knowledge Management, 9 (3). pp. 64-82. ISSN 1367-3270

Wong, Kuan Yew (2005) Critical success factors for implementing knowledge management in small and medium enterprises. Industrial Management & Data Systems, 105 (3). pp. 261-279. ISSN 0263-5577

Wong, Kuan Yew (2005) A critical review of knowledge management frameworks. International Journal of Information Technology and Management, 4 (3). pp. 269-289. ISSN 1461-4111

Wong, Kuan Yew and Aspinwall, Elaine (2005) Knowledge Management : Case Studies in SMEs and Evaluation of an Integrated Approach. Journal of Information and Knowledge Management, 4 (2). pp. 95-111.

Wong, K. Y. and Aspinwall, E. (2005) Knowledge Management: Case Studies in SMEs and Evaluation of an Integrated Approach. Journal of Information and Knowledge Management, 4 (2). pp. 95-111.

Y

Yaacob, Mohd. Shafiek and Jamaluddin, Hishamuddin and Harun, Sobri (2005) Daily streamflow forecasting using simplified rule-based fuzzy logic system. The Journal of The Institution of Engineers, Malaysia, 66 (4). pp. 23-28. ISSN 0126-513X

Yaakob, Omar and Chau, Quah Peng (2005) Weather downtime and its effect on fishing operation in peninsular malaysia. Weather downtime and its effect on fishing operation in peninsular malaysia . pp. 13-26.

Yaakob, Omar and Lee, Teoh eng and Wai, Liew Yek and King, Koh Kho (2005) Design of malaysian fishing vessel for minimum resistance. Design of malaysian fishing vessel for minimum resistance . pp. 1-12. ISSN 0127-9696

Yaakob, Omar and Quah, Peng Chau (2005) Weather Downtime And Its Effect On Fishing Operation In Peninsular Malaysia. Jurnal Teknologi A (42 A). pp. 13-26. ISSN 0127-9696

Yaakob, Omar and Teoh, Eng Lee and Liew, Yek Wai and Koh, Kho King (2005) Design of Malaysian fishing vessel for minimum resistance. Jurnal Teknologi A (42A). pp. 1-12. ISSN 0127-9696

Yusni Ahmad, Wan Fauzi (2005) Full scale fire test of school building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Yusof, Ahmad Anas and Wan Ali, Wan Khairuddin and Abd Rahman, Tharek and Ani, Farid Nasir (2005) Microwave and reflection properties of palm shell carbon–polyester conductive composite absorber. Microwave and reflection properties of palm shell carbon–polyester conductive composite absorber . pp. 59-74. ISSN 0127-9696

Z

Zadry, Hilma Raimona (2005) The integration of Total Quality Management (TQM) and Theory Of Constraints (TOC) implementation in Malaysian automotive suppliers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zainal, Faroak Faquruddin (2005) Heat transfer analysis in a semi - cylindrical duct. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Zaman @ Bujang, Izzuddin (2005) Study of dynamic behaviour of truck chassis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.