Items where Year is 1999

Abdul Malek, Mohd. Shahid (Penterjemah) and Idris, Ani (Penterjemah) (1999) Mekanik getaran : teori dan penggunaan edisi kedua. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0161–7

Ahmad, Zainal Abidin (1999) Proses pembuatan jilid 1. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0145–5

Carlo, Nasfryzal (1999) Kesan pengudaraan ke atas kualiti air reservoir di Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Darus, Amer Nordin (Penterjemah) (1999) Mekanik bendalir termodinamik mesin turbo edisi ketiga. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0142–0

El Rahman Gouda, Hamdy Abd. (1999) Performance of structural wood column exposed to fire (Volume I : Text). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Gouda, Hamdy Abd El Rahman (1999) Performance of structural wood column exposed to fire (Volume II : Appendices). Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hamid, N. H. B. and Hamzah, Esah (1999) Formability of chromate conversion coating on zinc electroplated steel sheet. In: International conference on computer methods and experimental measurments for surface treatment , September 1999, Itali.

Hashim, Maizon (1999) The effects of procurement methods on performance of construction projects in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Hussein, Shamsul Bahri and Jamaluddin, Hishamuddin and Mailah, Musa (1999) An intelligent method to estimate the inertia matrix of a robot arm for active force control using on-line neural network training scheme. Jurnal Mekanikal (8). ISSN 0127-3396

Islam, Mohammad Nurul and R. , Zailani and Ani, Farid Nasir (1999) Pyrolytic oil from fluidised bed pyrolysis of oil palm shell and its characterisation. Renewable Energy, 17 (1). pp. 73-84. ISSN 0960 - 1481

Jailani, Mohd. Anuar and Mohd. Jaafar, Mohammad Nazri (1999) Emisi ekzos dari kenderaan bermotor, kesannya ke atas atmosfera dan kaedah pengurangannya : satu kajian. Jurnal Mekanikal (8). ISSN 0127-3396

Jamil, Md. Kawser (1999) Thermal processing of rubber-based solid waste to liquid fuel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Jusoh, Iberahin (1999) Offshore pipeline risk and consequence assessment. Jurnal Mekanikal, 1 (7). pp. 56-71. ISSN 0127-3396

Khaled Omar, Mohamed (1999) An integrated approach to production planning and scheduling for multiple products batch with intermittent demand. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Lee, Wai Neng (1999) A study of vibration mode shape and noise emission of a rectangular panel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

M. Yusuf, Md. Afendi (1999) Paraffin wax application in automotive medelling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mailah, Musa (1999) Design and development of a multi-gripper for use in an automated robotic assembly system. Jurnal Mekanikal (7). ISSN 0127-3396

Mainal, Mohd. Ramzan (1999) Asas seni bina kapal : struktur kapal. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0168–4

Malik, Adam (1999) Kajian keutuhan permukaan hasil proses mengisar halus ke atas keluli alat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mat Saman, Muhamad Zameri and Cheong, Wee Tat (1999) Development and implementation of computer integrated production planning system for job shop company. Jurnal Mekanikal, 1 (7). pp. 1-16. ISSN 0127-3396

Memon, Amjad Hussain (1999) The use of pulverized fuel ash, ground granulated blast furnace slag and silica fume in high performance concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Jaafar, Mohammad Nazri and Muhammad, Sallehuddin and Mansor, Shuhaimi and Abdul Latif, Ainullotfi (1999) Glosari kejuruteraan aeronautik. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0147–1

Mohd. Ja´afar, Mohammad Nazri (1999) Jadual aliran boleh mampat satu dimensi. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0169–2

Mohd. Rohani, Jafri and Syed Hassan, Syed Ahmad Helmi and Chan, Eu Lene (1999) Characterization of a wave soldering process using Taguchi method. Jurnal Mekanikal (8). ISSN 0127-3396

Mohd. Sidek, Abdul Razak (1999) Hull design of dual function military craft using glass fibre-reinforced plastics. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Taib, Mohd. Nor (1999) Frequency response of gas turbine condition monitoring system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Mohd. Yusof, Sha'ri (1999) Critical review of total quality management. Jurnal Mekanikal (8). ISSN 0127-3396

Prayitno, Dody and Hamzah, Esah and Mohd. Ghazali, Mohd. Zulkifli (1999) Microstructure study on Al-Si bar produced by the new near shape casting technique. In: Scientific Conference of Electron Microscopy Society Malaysia, 1999, Pahang.

Quah, Boon Aik (1999) Microstructures and mechanical properties of low carbon dual phase steels. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Senawi, Mohd. Yusoff (1999) Development of a building energy analysis package (BEAP) and its application to the analysis of cool thermal energy storage systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.

Shamsudin, Zainul Rashid and Mohd. Jaafar, Mohammad Nazri (1999) Pembangunan perisian (VORLATTE) menggunakan kaedah kekisi vorteks bagi menentukan ciri aerodinamik sayap sembarangan. Jurnal Mekanikal, 1 (7). pp. 36-55. ISSN 0127-3396

Wan Nik, Wan Mohd. Norsani (Penterjemah) and Ramli, Yahya (Penterjemah) (1999) Buku panduan kuasa bendalir : jilid 1 reka bentuk sistem, penyenggaraan dan penyelesaian masalah. Penerbit UTM, Skudai, Johor Bahru. ISBN 983–52–0170–6

Yeoh, Pit Yeow (1999) Realiability analysis and prediction of a commercial communication product under impactive conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Mechanical Engineering.