Items where Division is "Razak School of Engineering and Advanced Technology" and Year is 2014

A

Ab. Aziz, Nur Fadillah and Mohd. Yusof, Othman and Che Hassan, Rozaimi and Sulaiman, Saiful Aman and Said, Md. Azlan Shah (2014) An acoustic ground discrimination system to mapping sea-bed feature classes. Proceedings - 2014 5th IEEE Control and System Graduate Research Colloquium, ICSGRC 2014 . pp. 91-95.

Ab. Ghani, Nur Syhuhada and Masrom, Maslin (2014) Human resource management practice models applied in banking industry: a review. Sains Humanika, 2 (2). pp. 37-42. ISSN 2289-6996

Abas, Norzaida and Mohd. Daud, Zalina and Yusof, Fadhilah (2014) A comparative study of mixed exponential and Weibull distributions in a stochastic model replicating a tropical rainfall process. Theoretical and Applied Climatology, 118 (3). pp. 597-607. ISSN 0177-798X

Abdul Rahman, Roselainy and Baharun, Sabariah and Mohammad Yusof, Yudariah and Syed Abd. Rahaman, Sharipah Alwiah (2014) Self-regulated learning as the enabling environment to enhance outcome-based education of undergraduate engineering mathematics. International Journal of Quality Assurance in Engineering and Technology Education (IJQAETE), 3 (2). pp. 43-53. ISSN 2155-496X

Abdul Wahab, Nur Haliza and A. Latiff, Liza and Syed Ariffin, Sharifah Hafizah and N. Effiyana, Ghazali (2014) Route optimization via RSSI APPs in indoor proxy mobile IPv6 test-bed. Research Journal of Applied Sciences, Engineering and Technology, 8 (8). pp. 942-951. ISSN 2040-7459

Abdullah, Morina and Mohamed Shaharoun, Awaluddin and Azman, Azri (2014) Review current practical skills assessment in machining course based on psychomotor domain. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 171-175.

Abdullah, Nasuha Lee (2014) Operational complexity impact on quality and performance of electrical and electronics industry in Malaysia. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Abu, Aminudin and Abdul Latiff, Liza (2014) Vibration prevention of steam turbine by mixing the main demand with vibration signal. IPASJ International Journal of Electronics & Communication (IIJEC), 2 (3). pp. 17-22. ISSN 2321-5984

Abu, Mohd. Yazid and Jamaludin, Khairur Rijal (2014) Application of Mahalanobis-Taguchi system on crankshaft as remanufacturing automotive part: a case study. Advanced Materials Research, 845 . pp. 883-888. ISSN 1022-6680

Abu, Mohd. Yazid and Jamaludin, Khairur Rijal and Abdul Sani, Amiril Sahab and Abdullah, Tajul Ariffin and Abdul Wahab, Dzuraidah (2014) An application of failure mode and effect analysis to cylinder head during dismantle of remanufacturing process: a case study. Advanced Materials Research, 845 . pp. 841-851. ISSN 1022-6680

Abu Bakar, Nur Azaliah and Selamat, Harihodin and Kama, Mohd. Nazri (2014) An assessment model for government enterprise architecture establishment phase. Advanced Science Letters, 20 (12). pp. 1987-1991. ISSN 1936-6612

Abu Husain, Mohd. Khairi and Mohd. Zaki, Noor Irza and Najafian, Gholamhossein (2014) Prediction of extreme values of offshore structural response by an efficient time simulation technique. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 4A .

Ahmad, Robiah and Abdul Rahim, Abdul Rahman and Memari, Ashkan (2014) Production planning and inventory control in automotive supply chain networks. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8481 L (PART 1). pp. 430-439. ISSN 0302-9743

Ahmad Latiffi, Aryani and Brahim, Juliana and Fathi, Mohamad Syazli (2014) The development of building information modeling (BIM) definition. Applied Mechanics and Materials, 567 . pp. 625-630. ISSN 1660-9336

Akmal Jamaludin, Nor Azliana and Sahibuddin, Shamsul (2014) Electronic learning industrial environment system (eLINS) for academia-industry collaboration. Lecture Notes on Software Engineering, 2 (1). pp. 71-75. ISSN 2301-3559

Al-Khanak, Sana'a Abdul Karim and Nik Mahmood, Nik Hasnaa (2014) Factors influence organization management towards using electronic recruitment strategy. Sains Humanika, 2 (2). pp. 47-52. ISSN 2289-6996

B

Batumalay, Malathy and Rahman, H. A. and Kam, Wern and Ong, Yong Sheng and Ahmad, Fauzan and Zakaria, Rozalina and Harun, Sulaiman Wadi and Ahmad, H. (2014) Evaluation of the tapered PMMA fiber sensor response due to the ionic interaction within electrolytic solutions. Journal of Modern Optics, 61 (2). pp. 154-160. ISSN 0950-0340

C

Che Hasan, Rozaimi and Ierodiaconou, Daniel A. and Laurenson, Laurie J. B. and Schimel, Alexandre C. G. (2014) Integrating multibeam backscatter angular response, mosaic and bathymetry data for benthic habitat mapping. Plos One, 9 (5). ISSN 1932-6203

Chelliapan, Shreeshivadasan and Roudi, Anita Maslahati and Roudi, Amin Maslahati (2014) Quality and quantity of municipal solid waste in Mashhad. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (1). pp. 101-109. ISSN 0975-8585

Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Mohamed Shaharoun, Awaluddin and Ismail, Syuhaida (2014) Review on enterprise resource planning implementation roadmaps: project management perspective. Sains Humanika, 2 (2). pp. 135-138. ISSN 2289-6996

Chofreh, Abdoulmohammad Gholamzadeh and Goni, Feybi Ariani and Mohamed Shaharoun, Awaluddin and Ismail, Syuhaida and Klemes, Jiri Jaromir (2014) Sustainable enterprise resource planning: imperatives and research directions. Journal of Cleaner Production, 71 . pp. 139-147. ISSN 0959-6526

Chong, Heap Yih and Preece, Christopher Nigel (2014) Improving construction procurement systems using organizational strategies. Acta Polytechnica Hungarica, 11 (1). pp. 5-20. ISSN 1785-8860

D

Dolah, Rozzeta and Miyagi, Zenichi and Bergman, Bo (2014) Outliers effect in measurement data for T-peel adhesion test using Robust parameter design. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 77-81. ISSN 0127-9696

Durdyev, Serdar and Ihtiyar, Ali and Ismail, Syuhaida and Sh. Ahmad, Fauziah (2014) Productivity and service quality: factors affecting in service industry. 2nd World Conference on Business, Economics and Management, 109 . pp. 487-491. ISSN 1877-0428

F

Fahami, Sheikh Muhammad Hafiz and Zamzuri, Hairi and Mazlan, Saiful Amri and Saruchi, Sarah Atifah (2014) The variable steering ratio for vehicle steer by wire system using hyperbolic tangent method. In: 3rd International Conference on Materials Engineering and Automatic Control, ICMEAC 2014, 17-18 May, 2014, Tianjin; China.

H

Hafiz Fahami, Sheikh Muhammad and Zamzuri, Hairi and Mazlan, Saiful Amri and Saruchi, Sarah Atifah (2014) The variable steering ratio for vehicle steer by wire system using hyperbolic tangent method. Applied Mechanics and Materials, 575 . pp. 781-784. ISSN 1660-9336

Hassan, Mohamad Zaki and Umer, R. and Balawi, S. and Cantwell, W. J. (2014) The impact response of environmental-friendly sandwich structures. Journal of Composite Materials, 48 (25). pp. 3083-3090. ISSN 0021-9983

Hui, K. H. and Hee, Lim Meng and Leong, Mohd. Salman and Abdelrhman, Ahmed M. (2014) Time-frequency signal analysis in machinery fault diagnosis: review. Advanced Materials Research, 845 . pp. 41-45. ISSN 1022-6680

Hui, K. H. and Lim, Meng Hee and Leong, M. Salman (2014) Equipment aging, aging detection, and aging management: a review. Applied Mechanics and Materials, 575 . pp. 935-938. ISSN 1660-9336

J

Jamaludin, Khairur Rijal and M. Amin, Sri Yulis and Muhamad, Norhamidi (2014) Rheological properties analysis of WC-Co injection feedstock. Materials Science Forum, 773-77 . pp. 880-886. ISSN 0255-5476

Jasimin, Tuti Haryati and Mohd. Ali, Hishamuddin (2014) The impact of sustainability on the value of commercial office buildings in Malaysia: Russian-Doll model approach. Jurnal Teknologi, 71 (4). pp. 131-143. ISSN 0127-9696

K

Kurniawan, Denni and Mohamed Shaharoun, Awaluddin and Sudin, Izman and Hashemi, Heidar (2014) Recent developments on computer aided fixture design: case based reasoning approaches. Advances in Mechanical Engineering . ISSN 1687-8132

L

Lim, Meng Hee and Leong, Mohd. Salman and Hui, K. H. (2014) Analysis of residual wavelet scalogram for machinery fault diagnosis. Advanced Materials Research, 845 . pp. 113-117. ISSN 1022-6680

Lim, Meng Hee and Leong, Mohd. Salman and Hui, K. H. (2014) Blade faults classification and detection methods: review. Advanced Materials Research, 845 . pp. 123-127. ISSN 1022-6680

Lim, Meng Hee and Leong, Mohd. Salman @ Yew Mun (2014) Reconstruction of vital blade signal from unsteady casing vibration. Advances in Mechanical Engineering, 2014 . ISSN 1687-8132

M

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaluddin, Khairur Rijal and Mat Nor, F. (2014) The influence of SS316l foam fabrication parameter using powder metallurgy route. In: 5th International Conference on Material and Manufacturing Technology, ICMMT 2014, 8-9 May, 2014, Kuala Lumpur, Malaysia.

Mad Rosip, N. I. and Ahmad, Sufizar and Jamaluddin, Khairur Rijal and Mat Nor, F. (2014) The influence of SS316l foam fabrication parameter using powder metallurgy route. Advanced Materials Research, 974 . pp. 174-178. ISSN 1022-6680

Mat Noor, Fazimah and Zain, M. I M and Jamaludin, Khairur Rijal and Hussin, R. and Kamdi, Zakiah and Ismail, Ahmad Fauzi and Ahmad, Sufizar and Mohd. Taib, Hariati (2014) Potassium bromide as space holder for titanium foam preparation. 4TH MECHNICAL AND MANUFACTURING ENGINEERING, PTS 1 AND 2, 465-46 . pp. 922-926. ISSN 1660-9336

M. Abdelrhman, Ahmed and Lim, Meng Hee and Leong, Mohd. Salman and Al-Obaidi, Salah M. Ali (2014) Condition monitoring of blade in turbomachinery: a review. Advances in Mechanical Engineering . ISSN 1687-8132

M. Amin, Sri Yulis and Muhamad, Norhamidi and Jamaludin, Khairur Rijal (2014) Dynamic response optimization for cemented carbide injection molding. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 41-44. ISSN 0127-9696

M. Amin, Sri Yulis and Muhamad, Norhamidi and Jamaludin, Khairur Rijal and Fayyaz, Abdolali and Heng, Shye Yunn (2014) Characterization of the feedstock properties of metal injection-molded WC-Co with palm stearin binder system. Sains Malaysiana, 43 (1). pp. 123-128. ISSN 0126-6039

Maarop, Nurazean and Che Mohd. Yusoff, Rasimah (2014) Security features for remote healthcare system: a feasibility study. International Science Index, 12 (8). pp. 19-22. ISSN 1307-6892

Mallahzadeh, H. and Wang, Ya Xing and Abu Husain, Mohd. Khairi and Mohd. Zaki, N. I. and Najafian, Gholamhossein (2014) Accurate estimation of the 100-year responses from the probability distribution of extreme surface elevations. Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE, 4B .

Masrom, Maslin and Din, Sabariyah (2014) The influence of e-participation on e-filing participation: a study of citizen adoption on e-government services. International Journal of Engineering Science and Innovative Technology, 3 (5). pp. 251-260. ISSN 2319-5967

Masrom, Maslin and Usat, Selisa (2014) The use and implications of online social networking to the students: a literature review. Sains Humanika, 2 (2). pp. 103-107. ISSN 2289-6996

Mat Yahya, Siti Hafiza and Ismail, Syuhaida (2014) Performance appraisal amongst contractors in construction project in Malaysia. In: Third International Conference on Engineering Business Management (ICEBM 2014), 25-26 August, 2014, Kuala Lumpur, Malaysia.

Matloob, Faris A. and Sulaiman, Ahmad Bashri (2014) The impact of spatial organization on locating the friday mosques in the traditional Islamic city-the old Mosul city as a case study. Jurnal Teknologi, 71 (1). pp. 85-94. ISSN 0127-9696

Md. Din, Mohd. Fadhil and Ponraj, Mohanadoss and Loosdrecht, Mark van and Ujang, Zaini and Chelliapan, Shreeshivadasan and Zambare, Vasudeo P. (2014) Utilization of palm oil mill effluent for polyhydroxyalkanoate production and nutrient removal using statistical design. International Journal of Environmental Science and Technology, 11 (3). pp. 671-684. ISSN 1735-1472

Minghat, Asnul Dahar and Abdullah, Siti Azwanee (2014) Pendidikan vokasional dalam kalangan murid bermasalah pendengaran di sekolah menengah pendidikan khas. In: International Seminar on Technical and Vocational Education (TVEIS 2014), 20-31 August, 2014, Skudai, Johor.

Mohammad, Ahmad Khir (2014) Measurement and improvement of organisational performance using model of performance analysis. PhD thesis, Universiti Teknologi Malaysia, Razak School in Engineering and Advanced Technology.

Mohd. Ali, Nor Raihana and Pope, Jeff (2014) The influence of religiosity on taxpayers' compliance attitudes: empirical evidence from a mixed-methods study in Malaysia. Accounting Research Journal, 27 (1). pp. 71-91. ISSN 1030-9616

Mohd. Isa, Mohd Halimudin and Masrom, Maslin and Salim, Kamilah Radin (2014) Review of learning models for production based education training in technical education. Proceedings - 2014 International Conference on Teaching and Learning in Computing and Engineering, LATICE 2014 . pp. 206-211.

Mohd. Yusof, Sha'ri and Harudin, Nolia (2014) Speeding maintenance performance through time study. Applied Mechanics and Materials, 607 . pp. 860-863. ISSN 1660-9336

Mohd. Zaki, Noor Irza and Abu Husain, M. K. and Najafian, G. (2014) The accuracy of the MFMNS and FMNS models in predicting long-term distribution of the extreme values of offshore structural response. In: 33rd International Conference on Ocean, Offshore and Arctic Engineering, ASME 2014, 8-13 June, 2014, USA.

Mohd. Zaki, Noor Irza and Fathi, Mohamad Syazli (2014) Implementing green building procedures for the construction of residential buildings in Abu Dhabi. International Journal Of Interdisciplinary Research And Innovations, 2 (2). pp. 1-29. ISSN 2348-1218

Muhamad Rawai, Norshakila and Abedi, Mohammad and Fathi, Mohamad Syazli (2014) The effect of project and programme reference models in Architecture, Engineering and Construction (AEC) system development. Jurnal Teknologi, 70 (7). pp. 9-14. ISSN 0127-9696

N

Nik Mahmood, Nik Hasnaa (2014) A review of talent management strategies for a large investor-owned company. Journal of Apllied Science and Agriculture, 9 (3). pp. 1146-1152. ISSN 1146-1152

Nik Mahmood, Nik Hasnaa and Md. Yussof, Mohd. Helmi and Tan, Hup Soon and Tin, Pei Ling (2014) The relationship between career development practices and high performance talent in private organizations in Malaysia. Sains Humanika, 2 (2). pp. 59-64. ISSN 2289-6996

O

Omar, Mohamed Hanafiah and Lim, Meng Hee (2014) Ambient energy harvesting for wireless sensor nodes: a review. Advanced Materials Research, 1025-1 . pp. 1093-1098. ISSN 1022-6680

Ong, Sin Rua and Jamil, Rossilah and Yusof, Muhammad Fathi (2014) Understanding the declining of trade union density: literature review and conceptual framework. Sains Humanika, 2 (2). pp. 25-30. ISSN 2289-6996

Othman, Nooraini (2014) A comparative study between Western and Islamic perspectives on human development and life-friendly environment. Online Journal of Research in Islamic Studies, 1 (1). pp. 6-29. ISSN 2289-6821

P

Panahi, Babak and Preece, Christopher Nigel and Wan Zakaria, Wan Normeza and Rogers, John (2014) The correlation of EVA and MVA with stock price of companies in Tehran stock market. Interdisciplinary Journal of Contemporary Research in Business, 6 (2). pp. 291-308. ISSN 2073-7122

Panahi, Babak and Preece, Christopher Nigel and Wan Zakaria, Wan Normeza and Rogers, John and Moezzi, Elena (2014) Review and conceptualization of value congruence toward construction industry in Malaysia. International Journal of Academic Research in Business and Social Sciences, 4 (10). pp. 611-630. ISSN 2308-3816

Papargyropoulou, Effie and Lozano, Rodrigo and Steinberger, Julia K. and Wright, Nigel and Ujang, Zaini (2014) The food waste hierarchy as a framework for the management of food surplus and food waste. Journal of Cleaner Production, 76 . pp. 106-115. ISSN 0959-6526

R

Rohayah, C. A. and Shamsuddin, Shuhana and Sulaiman, Ahmad Bashri (2014) The contribution of historic urban spaces in influencing the character of George Town UNESCO world heritage site, Malaysia. WIT Transactions on Ecology and the Environment, 179 VO . pp. 1191-1199. ISSN 1743-3541

Rosip, N. I. Mad and Ahmad, S. and Arpawi, N. L. and Jamaludin, Khairur Rijal and Noor, F. Mat (2014) The effect of sintering temperature and composition for density and porosity of SS316L foam. Applied Mechanics and Materials, 465-46 . pp. 988-992. ISSN 1660-9336

S

Sari, Emelia and Shaharoun, Awaluddin Mohamed and Ma'aram, Azanizawati (2014) Preliminary framework of sustainable maintenance performance measurement systems for automotive companies. Advanced Materials Research, 845 . pp. 590-595. ISSN 1022-6680

Shahijan, Milad Kalantari and Rezaei, Sajad and Preece, Christopher Nigel and Wan Ismail, Wan Khairuzzaman (2014) Examining retailers’ behaviour in managing critical points in Halal meat handling: a PLS analysis. Journal of Islamic Marketing, 5 (3). pp. 446-472. ISSN 1759-0833

Shahri, Norsyarizan and Abdul Rahman, Roselainy and Hussain, Noor Hamizah (2014) Student approach to learning in programming courses among industrial mechatronics engineering technology students. International Conference on Teaching and Learning in Computing and Engineering . pp. 100-105. ISSN 2377-0309

Shamsuddin, Shuhana and Zaini, Khazainun (2014) The influence of the surveillance factors towards the residents' perceptions on safety at the shared outdoor spaces in gated community. Advanced Materials Research, 838-84 . pp. 2942-2947. ISSN 1022-6680

Sarip, Shamsul and Wan Hassan, Mat Nawi (2014) Meramal aliran udara dan keselesaan di dalam masjid Sultan Salahuddin Abdul Aziz Shah menggunakan simulasi komputer. Jurnal Teknologi (Sciences and Engineering), 69 (1). pp. 39-46. ISSN 2180-3722

Subari, Mustafa Din and Hassan, Azmi (2014) Building EOS capabilities for Malaysia - the options. Malaysian Journal of Remote Sensing & Gis, 3 (2). pp. 46-53. ISSN 1511-7049

Suhot, Mohamed Azlan and Chambers, A. R. (2014) The effects of voids on the flexural properties and failure mechanisms of carbon/epoxy composites. Jurnal Teknologi, 71 (2). pp. 151-157. ISSN 0127-9696

T

Tahsildari, Hamed and Hashim, Mohd. Taib and Wan Zakaria, Wan Normeza (2014) Contributing transformational leadership towards organizational effectiveness through entrepreneurial passion. Journal of Economics and Sustainable Development, 5 (24). pp. 216-224. ISSN 2222-2855

Tahsildari, Hamed and Hashim, Mohd. Taib and Wan Zakaria, Wan Normeza (2014) The influence of transformational leadership on organizational effectiveness through employees' innovative behaviour. Journal Of Economics And Sustainable Development, 5 (24). pp. 225-236. ISSN 2222-2855

Teo, Wil Ly (2014) A model for it practitioners’ participation in it governance initiatives. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

Tin, Pei Ling and Yusof, Muhammad Fathi and Nik Mahmood, Nik Hasnaa and Tan, Hup Soon (2014) The implementation of minimum wages in Malaysia. Sains Humanika, 2 (2). pp. 43-46. ISSN 2289-6996

V

Vali Mohamed, Anwar Ali (2014) High fidelity simulation models for equipment performance prediction in semiconductor industry. PhD thesis, Universiti Teknologi Malaysia, Razak School of Engineering and Advanced Technology.

W

Wan Mohd. Rani, Wan Nurul Mardiah (2014) Understanding the usage pattern of local facilities in urban neighbourhood towards creating a livable city. American Transactions of Engineering and Applied Sciences, 3 (2). pp. 129-148. ISSN 2229-1652

Watanabe, Kazunori and Miyagi, Zenichi and Dolah, Rozzeta and Takahashi, K. (2014) Optimization of the paper permeability tester using Robust design. Jurnal Teknologi (Sciences and Engineering), 68 (4). pp. 91-96. ISSN 0127-9696

Y

Yusof, Muhammad Fathi (2014) Konsep caretaker government : di mana peranan SPR. In: Seminar Kebangsaan Pengendalian Pilihan Raya Di Malaysia, 18 March, 2014, Kuala Lumpur, Malaysia.

Yusof, Muhammad Fathi (2014) Pengendalian pilihan raya dalam perlembagaan: perlu penilaian semula? In: Seminar Kebangsaan Pengendalian Pilihan Raya di Malaysia, 18 March, 2014, Kuala Lumpur, Malaysia.

Z

Zainal, Nurbaya and Mahmood, Mohamad Rusop (2014) Effect of addition Pb content on lead titanate thin films for MIM capacitor. IOP Conference Series: Materials Science and Engineering, 58 (1). ISSN 1757-8981

Zainal, Nurbaya and Zulkefle, Habibah and Mahmood, Mohamad Rusop (2014) Thickness dependency on dielectric property of lead titanate thin film. Nanoscience, Nanotechnology and Nanoengineering, 832 . pp. 384-387. ISSN 1022-6680

Zakaria, Nor Hidayati (2014) Towards a model of e-government services adoption among employees in developing countries. Journal Of Information Systems Innovation (JISRI), 8 . pp. 66-74. ISSN 2289-1358

Zamzuri, Hairi and Abdul Rahman, Mohd. Azizi and Mazlan, Saiful Amri and Derawi, Dafizal and Salim, Nurul Dayana (2014) Robust attitude controller for uncertain hexarotor micro aerial vehicles (MAVs). IEEE International Conference on Intelligent Robots and Systems . pp. 4776-4781. ISSN 2153-0858

Zamzuri, Hairi and Mazlan, Saiful Amri and Low, Chan Yee (2014) Simple robust road lane detection algorithm. 2014 5th International Conference on Intelligent and Advanced Systems: Technological Convergence for Sustainable Future, ICIAS 2014 - Proceedings .

Zamzuri, Hairi and Mazlan, Saiful Amri and Zulkarnain, Noraishikin (2014) Ride and handling analysis for an active anti-roll bar: case study on composite nonlinear control strategy. International Journal of Automotive and Mechanical Engineering, 10 (1). pp. 2122-2143. ISSN 2229-8649

Zulkarnain, Noraishikin and Zamzuri, Hairi and Mazlan, Saiful Amri (2014) Combined CNF with LQR in improving ride and handling for ground vehicle. Applied Mechanics and Materials, 575 . pp. 749-752. ISSN 1660-9336

Zulkarnain, Noraishikin and Zamzuri, Hairi and Md. Sam, Yahaya and Mazlan, Saiful Amri and Zainal, Sheikh Muhammad Hafiz Fahamii (2014) Improving vehicle ride and handling using LQG CNF fusion control strategy for an active antiroll bar system. Abstract and Applied Analysis, 2014 . ISSN 1085-3375