Items where Division is "Mechanical Engineering" and Year is 2021

Agun, Linda and Ahmad, Norhayati and Redzuan, Norizah and Idirs, Nor Azyan Syahirah and Mat Taib, Shazwin and Zakaria, Zarita and Raja Ibrahim, Raja Kamarulzaman (2021) Sterilization of oyster mushroom crop residue substrate by using cold plasma technology. Materials Today: Proceedings, 39 (2). pp. 903-906. ISSN 2214-7853

Ali, A. and Andriyana, A. and Abu Hassan, A. and Ang, B. C. (2021) Fabrication and thermo-electro and mechanical properties evaluation of helical multiwall carbon nanotube-carbon fiber/epoxy composite laminates. Polymers, 13 (9). ISSN 2073-4360

Mudang, M. and Hamzah, E. and Bakhsheshi-Rad, H. R. and Berto, F. (2021) Relationship between the microstructure and the heat treatment and creep behavior of fe-33ni-19cr alloy. Fatigue and Fracture of Engineering Materials and Structures, 44 (7). 1719 - -1738. ISSN 8756-758X

Zaini, N. Z. and Kamaruzaman, N. B. and Abidin, U. (2021) Magnetic microbeads trapping using microfluidic and permanent magnet system. Evergreen, 8 (1). ISSN 2189-0420

Ahmad Reza, N. and Akhmal, N. H. and Fadil, N. A. and Mohd. Taib, M. F. (2021) A review on plants and biomass wastes as organic green corrosion inhibitors for mild steel in acidic environment. Metals, 11 (7). ISSN 2075-4701

Adrees Majeed, F. S. and Yusof, N. M. and Sharif, S. and Suhaimi, M. A. and Saad, S. M. and Zakaria, K. and Shayfull, Z. and Aziz, S. N. A. (2021) The performance of γ-Fe2O3 and xGnP nanofluid in hard turning of AISI 420 stainless steel. In: 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020, 26 - 27 November 2020, Langkawi, Malaysia.

A-Ulmunem, Al-Samaraie Abdulmunem Raad (2021) Thermo-electrical performance enhancement of photovoltaic / phase change material systems using copper foam matrix with multi-walled carbon nanotubes additives. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Ab. Talib, M. H. and Mat Darus, I. Z. and Yatim, H. M. and Hadi, M. S. and Shaharuddin, N. M. R. and Mazali, I. I. and Ardani, M. I. (2021) Vibration control of semi-active suspension system using modified skyhook with advanced firefly algorithm. In: 1st International Conference on Material Processing and Technology, ICMProTech 2021, 14 - 15 July 2021, Perlis, Virtual.

Ab. Wahid, Mastura and Othman, Norazila and Md. Zain, Mohd. Zarhamdy and Shaharuddin, Nik Mohd. Ridzuan (2021) Control and simulation of obstacle avoidance for a quadcopter. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 251-256. ISSN 1990-7710

Abd. Halim, Zulhelmi Alif and Ahmad, Norhayati and Hanapi, M. Faeez and Zainal, M. N. Firdaus (2021) Rapid surface treatment of grey cast iron for reduction of friction and wear by alumina coating using gas tunnel plasma spray. Materials Chemistry and Physics, 260 . p. 124134. ISSN 0254-0584

Abd. Rased, M. F. and Yoon, S. H. (2021) Experimental study on effects of asymmetrical stacking sequence on carbon fiber/epoxy filament wound specimens in DCB, ENF, and MMB tests. Composite Structures, 264 . p. 113749. ISSN 0263-8223

Abd. Samad, Faisal Ikram and Mohd. Yusop, Mohd. Yuzri and Shaharuddin, Nik Mohd. Ridzuan and Ismail, Nasrudin and Yaakob, Omar (2021) Slamming impact accelerations analysis on small high speed passenger crafts. Brodogradnja, 72 (1). pp. 79-94. ISSN 0007-215X

Abdelmaksoud, Sherif I. and Mailah, Musa and Abdallah, Ayman M. (2021) Enhancing disturbance rejection capability and body jerk performance of a twin-rotor helicopter model using intelligent active force control. Jurnal Mekanikal, 44 (NA). pp. 1-20. ISSN 2289-3873

Abdelmaksoud, Sherif I. and Mailah, Musa and Abdallah, Ayman M. (2021) Improving disturbance rejection capability for a quadcopter UAV system using self-regulating fuzzy PID controller. In: 2020 International Conference on Computer, Control, Electrical, and Electronics Engineering, ICCCEEE 2020, 26 - 28 February 2021, Khartoum, Sudan.

Abdelmaksoud, Sherif I. and Mailah, Musa and Abdallah, Ayman M. (2021) Practical real-time implementation of a disturbance rejection control scheme for a twin-rotor helicopter system using intelligent active force control. IEEE Access, 9 (NA). pp. 4886-4901. ISSN 2169-3536

Abdul Aziz, Siti Aishah and Mazlan, Saiful Amri and Ubaidillah, Ubaidillah and Mohamad, Norzilawati and Sedlacik, Michal and Nordin, Nur Azmah and Nazmi, Nurhazimah (2021) Loss factor behavior of thermally aged magnetorheological elastomers. Materials, 14 (7). pp. 1-16. ISSN 1996-1944

Abdul Halim, Zulhelmi Alif and Mat Yajid, Muhamad Azizi and Hamdan, Halimaton (2021) Effects of solvent exchange period and heat treatment on physical and chemical properties of rice husk derived silica aerogels. Silicon, 13 (1). pp. 251-257. ISSN 1876-990X

Abdul Hanan, Umar (2021) Mechanical properties of hybrid recyclate glass fibre - montmorillonite nanofiller reinforced polymer nanocomposite. PhD thesis, Universiti Teknologi Malaysia.

Abdul Malik, M. S. and Mohd. Jaafar, M. N. and Mavalavan, N. and Mohd. Ismail, M. S. and Rahim, M. R. and Said, M. (2021) Prestasi pembakaran biodiesel berasaskan minyak bunga matahari ke atas pembakar berbahan api cecair. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (2). ISSN 2289-7879

Abdul Malik, Muhammad Syahiran (2021) Combustion and emission characteristics of optimised yellow grease methyl ester in an oil burner applications. Masters thesis, Universiti Teknologi Malaysia.

Abdul Rahman, Mohd. Rosdzimin and Wan Shuib, Wan Mohd. Amin and Saad, Mohd. Rashdan and Che Idris, Azam and Mohd. Faizal, Hasan (2021) Combustion characteristic inside micro channel combustor. Jurnal Kejuruteraan, SI4 (1). pp. 109-116. ISSN 0128-0198

Abdul Satar, Reem Musab and As’arryi, Azizan and Abdullah, Mohd. Faiz and Md. Zain, Mohd. Zarhamdy (2021) The development of cutlery tool to reduce parkinson movement. In: 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020, 25 - 26 June 2020, Selangor, Malaysia.

Abdullah, S. I. B. S. and Iannucci, L. and Greenhalgh, E. S. and Ahmad, Z. (2021) A plane-stress damage model for vectran laminated composite. Applied Composite Materials, 28 (4). 1255 -1276. ISSN 0929-189X

Abdulmunem, Abdulmunem R. and Mohd. Samin, Pakharuddin and Abdul Rahman, Hasimah and Hussien, Hashim A. and Ghazali, Habibah (2021) A novel thermal regulation method for photovoltaic panels using porous metals filled with phase change material and nanoparticle additives. Journal of Energy Storage, 39 . p. 102621. ISSN 2352-152X

Abdulmunem, Abdulmunem R. and Mohd. Samin, Pakharuddin and Abdul Rahman, Hasimah and Hussien, Hashim A. and Izmi Mazali, Izhari and Ghazali, Habibah (2021) Numerical and experimental analysis of the tilt angle’s effects on the characteristics of the melting process of PCM-based as PV cell’s backside heat sink. Renewable Energy, 173 . pp. 520-530. ISSN 0960-1481

AbdulShaheed, Areej Ghazi (2021) Perception-driven model for hyper-redundant mobile robot navigation in unstructured environment. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Abidin, S. F. Z. and Rodzi, S. N. A. M. and Amir, K. and Zahari, I. and Jalal, R. I. A. and Abas, M. A. (2021) Reducing fuel consumption of a passenger car towards energy efficient vehicle by using belted alternator startertechnology. International Journal of Engineering Trends and Technology, 69 (9). pp. 116-123. ISSN 2349-0918

Abu, Falah and Gholami, Hamed and Mat Saman, Muhamad Zameri and Zakuan, Nohayati and Sharif, Safian and Streimikiene, Dalia (2021) Pathways of lean manufacturing in wood and furniture industries: a bibliometric and systematic review. European Journal of Wood and Wood Products, 79 (4). pp. 753-772. ISSN 0018-3768

Abu, Falah and Gholami, Hamed and Mat Saman, Muhamad Zameri and Zakuan, Norhayati and Streimikiene, Dalia and Kyriakopoulos, Grigorios L. (2021) An SEM approach for the barrier analysis in lean implementation in manufacturing industries. Sustainability (Switzerland), 13 (4). pp. 1-18. ISSN 2071-1050

Abu Hasan, Muhammad Danial (2021) Improved frequency domain decomposition and stochastic subspace identification algorithms for operational modal analysis. PhD thesis, Universiti Teknologi Malaysia.

Abubakar, M. and Muthuraja, A. and Ahmad, N. (2021) Experimental investigation of the effect of temperature on the density of kaolin clay. In: Advancements and Futuristic Trends in Mechanical and Materials Engineering, AFTMME 2019, 5 December 2019 - 7 December 2019, Rupnagar, India.

Abuelnour, Mohamed Ali and Abuelnuor, Abuelnuor A. A. and Al Rikabi, Ihab Jabbar and Ishag, Ahmed M. E. and Al-Awad, Mohamed A. and Al-Aziz, Omar A. (2021) Experimental investigation on recycling carbon dioxide into fuel using solar thermochemical cycle based on cerium oxide. In: 2020 International Conference on Computer, Control, Electrical, and Electronics Engineering, ICCCEEE 2020, 26 - 28 February 2021, Khartoum, Sudan.

Abuelnuor, Abuelnuor A. A.. and Abuelnour, Mohamed Ali and Omara, Adil A. M. and AL Rikabi, Ihab Jabbar and Salih Ali, Mohammed Adil and Ahmed Awad, Almoez Ibrahim and Mohamed Haj Ahmed, Moaz Abd. Allah (2021) Experimental study on pyrolysis of sugarcane bagasse for bioenergy production. In: 2020 International Conference on Computer, Control, Electrical, and Electronics Engineering, ICCCEEE 2020, 26 - 28 February 2021, Khartoum, Sudan.

Adam, K. and Abdul Wahid, Mazlan (2021) On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled swirl flameless combustor (SFC). Evergreen, 8 (1). pp. 117-122. ISSN 2189-0420

Adam, K. and Wahid, M. A. (2021) On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled swirl flameless combustor (SFC. Evergreen, 8 (1). pp. 117-122. ISSN 2189-0420

Afifah, A. N. and Syahrullail, S. and Wan Azlee, Nur Izyan and Rohah, A. Majid (2021) Synthesis and tribological studies of epoxidized palm stearin methyl ester as a green lubricant. Journal of Cleaner Production, 280 . ISSN 0959-6526

Afrizal, Efi (2021) Resistance prediction of double acting tanker in ice condition. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Agun, L. and Sabirin, S. and Ahmad, N. and Zakaria, Z. and Redzuan, N. and Raja Ibrahim, R. K. (2021) The efficiency of DBD cold plasma pen treatment on the oyster mushroom bacterial decontamination. In: International Laser Technology and Optics Symposium in Conjunction with Photonics Meeting 2020, ILATOSPM 2020, 22 - 23 October 2020, Johor, Malaysia.

Ahmad Israr, Haris and Wong, King Jye and Rivallant, Samuel (2021) Experimental and numerical investigation of humid ageing effects on CFRP laminates crashworthiness behaviours. International Journal of Crashworthiness, 26 (1). pp. 87-98. ISSN 1358-8265

Ahmad Reza, Norba’ayah and Mohd. Taib, Mohd. Firdaus and Md. Sirat, Rozlina (2021) Ergonomics awareness, working posture and muscle fatigue among industry workers and their relationship with musculoskeletal disorders (MSDs) symptoms: a case study. Jurnal Mekanikal, 44 (NA). pp. 29-37. ISSN 2289-3873

Ahmed, Y. A. and Hannan, M. A. and Oraby, M. Y. and Maimun, A. (2021) COLREGs compliant fuzzy-based collision avoidance system for multiple ship encounters. Journal of Marine Science and Engineering, 9 (8). ISSN 2077-1312

Aiman, Y. and Syahrullail, S. (2021) Tribological performance of palm stearin in cold forging test using aluminum alloy 6061. In: 3rd Symposium on Intelligent Manufacturing and Mechatronics, SympoSIMM 2020, 10 August 2020, Perlis, Malaysia.

Akbar, Imam and Prakoso, Akbar Teguh and Astrada, Yoga Martino and Sinaga, M. Sofyan and Ammarullah, Muhammad Imam and Adanta, Dendy and Mataram, Agung and Syahrom, Ardiyansyah and Jamari, J. and Basri, Hasan (2021) Permeability study of functionally graded scaffold based on morphology of cancellous bone. Malaysian Journal of Medicine and Health Sciences, 17 . pp. 60-66. ISSN 1675-8544

Al-Mola, Mohammed Hussin Ahmed and Mailah, Musa and Salim, Mohd. Azli (2021) Applying active force control with fuzzy self-tuning pid to improve the performance of an antilock braking system. International Journal of Nanoelectronics and Materials, 14 (ISST). pp. 489-502. ISSN 1985-5761

Alawi, O. A. and Kamar, H. M. and Mallah, A. R. and Mohammed, H. A. and Sabrudin, M. A. S. and Newaz, K. M. S. and Najafi, G. and Yaseen, Z. M. (2021) Experimental and theoretical analysis of energy efficiency in a flat plate solar collector using monolayer graphene nanofluids. Sustainability (Switzerland), 13 (10). ISSN 2071-1050

Alawi, Omer A. and Mohamed Kamar, Haslinda and Mallah, A. R. and Mohammed, Hussein A. and Kazi, S. N. and Che Sidik, Nor Azwadi and Najafi, Gholamhassan (2021) Nanofluids for flat plate solar collectors: Fundamentals and applications. Journal of Cleaner Production, 291 . p. 125725. ISSN 0959-6526

Alawi, Omer A. and Mohamed Kamar, Haslinda and Mallah, Abdul Rahman and Mohammed, Hussein A. and Sabrudin, Mohd. Aizad Sazrul and Hussein, Omar A. and Kazi, Salim Newaz and Najafi, Gholamhassan (2021) Graphene nanoplatelets suspended in different basefluids based solar collector: An experimental and analytical study. Processes, 9 (2). pp. 1-22. ISSN 2227-9717

Ali, A. and Mohd. Yasin, M. N. and Wan Ali, W. F. F. and Mahmed, N. and Kamarudin, M. R. and Adam, I. and Jusoh, M. and Rahim, H. A. and Khor, S. F. and Ramli, N. and Ali, N. (2021) A comprehensive review of midrange wireless power transfer using dielectric resonators. International Journal of Antennas and Propagation, 2021 . ISSN 1687-5869

Ali, Mohammed A. H. and Radzak, Muhammad S. A. and Mailah, Musa and Yusoff, Nukman and Abd. Razak, Bushroa and Ab. Karim, Mohd. Sayuti and Ameen, Wadea and A. Jabbar, Waheb and Alsewari, Abdul Rahman A. and Rassem, Taha H. and Nasser, Abdullah B. and Abdulghafor, Rawad (2021) A novel inertia moment estimation algorithm collaborated with Active Force Control scheme for wheeled mobile robot control in constrained environments. Expert Systems with Applications, 183 (NA). pp. 1-29. ISSN 0957-4174

Ali, Siti Khadijah and Fadzilan, Mohamad Faisal and Shaari, Aida Nur Syafiqah and Hadi, Muhamad Sukri and Ting, Rickey Pek Eek and Mat Darus, Intan Zaurah (2021) Modelling of flexible beam based on ant colony optimization and cuckoo search algorithms. Journal of Vibroengineering, 23 (4). pp. 810-822. ISSN 1392-8716

Ali Yahya, Mohammed Yahya and Mohd. Rohani, Jafri (2021) Occupational accidents and prevention through design in the Malaysian construction industry. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 March 2021 - 11 March 2021, Virtual, Online.

Alvarez-Regueiro, Eva and Barrera-Medrano, Esperanza and Martinez-Botas, Ricardo and Rajoo, Srithar (2021) Numerical analysis of non-radial blading in a low speed and low pressure turbine for electric turbocompounding applications. In: ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition, GT 2021, 7 June 2021 - 11 June 2021, Virtual, Online.

Alwan, W. and Hassan, A. and Ngadiman, N. H. A. (2021) A review on input features for control chart patterns recognition. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 March 2021 - 11 March 2021, Virtual, Online.

Ammarullah, Muhammad Imam and Md. Saad, Amir Putra and Syahrom, Ardiyansyah and Basri, Hasan (2021) Contact pressure analysis of acetabular cup surface with dimple addition on total hip arthroplasty using finite element method. In: 2nd International Conference on Mechanical Engineering Research and Application (iCOMERA 2020), 7 – 9 October 2020, Malang, Indonesia.

Amzin, Shokri and Mohd. Yasin, Mohd. Fairus (2021) Modelling of a bluff-body stabilised premixed flames close to blow-off. Computation, 9 (4). pp. 1-15. ISSN 2079-3197

Anjomshoae, Ali and Hassan, Adnan and Wong, Kuan Yew and Banomyong, Ruth (2021) An integrated multi-stage fuzzy inference performance measurement scheme in humanitarian relief operations. International Journal of Disaster Risk Reduction, 61 . p. 102298. ISSN 2212-4209

Anuar, M. A. N. and Mohd. Amin, N. L. and Fadil, N. A. (2021) Electroless nickel underlayer deposited between copper filler and silicon substrate: effect of bath pH. Advances in Materials and Processing Technologies, 7 (1). pp. 117-125. ISSN 2374-068X

Arjmand, M. M. and Galankashi, M. R. and Helmi, S. A. (2021) Leanness assessment in an auto parts manufacturer. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 March 2021 - 11 March 2021, Virtual, Online.

Arshad, Azrina and Mat Yajid, Muhamad Azizi and Idris, Mohd. Hasbullah (2021) Microstructural characterization of modified plasma spray LZ/YSZ thermal barrier coating by laser glazing. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Arudi, Ishiaka Shaibu and Hamzah, Esah and Mat Yajid, Muhammad Azizi and Abdul Razak, Bushroa (2021) Effect of dc power on the thickness, hardness and adhesion strength of Ti-51 at% Ni coated Ti/TiN. Journal of Metals, Materials and Minerals, 31 (3). pp. 118-126. ISSN 0857-6149

Astuti, Suryani Dyah and Tamimi, Mohammad H. and Pradhana, Anak A. S. and Alamsyah, Kartika A. and Purnobasuki, Hery and Khasanah, Miratul and Susilo, Yunus and Triyana, Kuwat and Kashif, Muhammad and Syahrom, Ardiyansyah (2021) Gas sensor array to classify the chicken meat with E. coli contaminant by using random forest and support vector machine. Biosensors and Bioelectronics: X, 9 . pp. 1-9. ISSN 2590-1370

Aziz, I. and Ghandvar, H. and Abu Bakar, T. I. and Chong, C. Y. (2021) Effect of praseodymium addition on wear properties of Al-15%Mg2Si composites. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 December 2019 - 10 December 2019, Putrajaya, Malaysia.

Azli, N. N. A. and Mohd. Amin, N. F. and Oluhende, S. T. and Mohamad, S. N. A. and Fadil, N. A. (2021) Electroless deposited black nickel-phosphorous solar absorber coatings on carbon steel: Effect of plating bath pH. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Bahador, Abdollah and Umeda, Junko and Yamanoglu, Ridvan and Abu Bakar, Tuty Asma and Kondoh, Katsuyoshi (2021) Strengthening evaluation and high-temperature behavior of ti–fe–o–cu–si alloy. Materials Science and Engineering A, 800 . ISSN 0921-5093

Bahador, Abdollah and Umeda, Junko and Yamanoglu, Ridvan and Abu Bakar, Tuty Asma and Kondoh, Katsuyoshi (2021) Strengthening evaluation and high-temperature behavior of Ti–Fe–O–Cu–Si alloy. Materials Science and Engineering A, 800 (NA). pp. 1-6. ISSN 0921-5093

Bahadora, Abdollah and Umeda, Junko and Ghandvar, Hamidreza and Abu Bakar, Tuty Asma and Yamanoglu, Ridvan and Issariyapat, Ammarueda and Kondoh, Katsuyoshi (2021) Microstructure globularization of high oxygen concentration dual-phase extruded ti alloys via powder metallurgy route. Materials Characterization, 172 . ISSN 1044-5803

Bakhsheshi-Rad, H. R. and Najafinezhad, A. and Hadisi, Z. and Iqbal, Nida and Daroonparvar, M. and Sharif, Safian and Ismail, Ahmad Fauzi and Akbari, M. and Krishna, Seeram Rama and Berto, F. (2021) Characterization and biological properties of nanostructured clinoenstatite scaffolds for bone tissue engineering applications. Materials Chemistry and Physics, 259 . p. 123969. ISSN 0254-0584

Barzegaravval, Hasan (2021) Exergo-economic optimization framework for biogas fuelled gas turbine at design point. Masters thesis, Universiti Teknologi Malaysia.

Bathusha, Mohamed Salman Sikandar and Mat, Shabudin and Izzuddin, Fahmi and Kasim, Khushairi Amri (2021) Tomography systems and sensor application for sharp-edged delta wing analysis. ELEKTRIKA- Journal of Electrical Engineering, 20 (2-3). pp. 26-34. ISSN 0128-4428

Bright, Brailson Mansingh and Selvi, Binoj Joseph and Abu Hassan, Shukur and Jaafar, Mariatti Mustapha and Siengchin, Suchart and Rangappa, Sanjay Mavinkere and Liu, Yucheng and Padmavathy, Saji Raveendran (2021) Characterization of chemically treated new natural cellulosic fibers from peduncle of Cocos nucifera l. Var typica. Polymer Composites, 42 (12). pp. 6403-6416. ISSN 0272-8397

Che Daud, Zul-Hilmi and Abdul Hamid, Mohd. Kameil and Mohd. Hassan, Fakhruddin and Mazali, Izhari Izmi and Ardani, Mohd. Ibthisham and Asus, Zainab (2021) Simulation battery cooling system for small scale electric vehicle (light EV). Journal of Transport System Engineering, 8 (2). pp. 8-15. ISSN 2289–9790

Chike, Onuchukwu Godwin and Ahmad, Norhayati and Al-Naib, Uday M. Basheer (2021) Additive manufacturing: a layered taxonomy and classification for material engineering process. Materials Science Forum, 1045 . pp. 157-178. ISSN 0255-5476

Chin, H. H. and Jia, X. and Varbanov, P. S. (2021) Targeting flowrates and concentrations in internal or total site water mains for single contaminant. Chemical Engineering Transactions, 86 . ISSN 2283-9216

Chin, J. C. and Fong, W. C. W. and Lee, K. Q. and Ng, C. Y. and Lee, K. M. and Tey, W. Y. and Siang, H. (2021) Interaction of wave-induced motion and bioelectricity generation for floating microalgal biophotovoltaic system. In: 6th International Conference on Civil, Offshore and Environmental Engineering, ICCOEE 2020, 13 July 2021 - 15 July 2021C, Kuching, Sarawak.

Chiong, M. C. and Chong, C. T. and Ng, J. H. and Mashruk, S. and Woei, W. F. C. and Samiran, N. A. and Mong, G. R. and Medina, A. V. (2021) Advancements of combustion technologies in the ammonia-fuelled engines. Energy Conversion and Management, 244 . ISSN 0196-8904

Chiong, Meng Choung and Kang, Hooi Siang and Shaharuddin, Nik Mohd. Ridzuan and Mat, Shabudin and Quen, Lee Kee and Ten, Ki Hong and Ong, Muk Chen (2021) Challenges and opportunities of marine propulsion with alternative fuels. Renewable and Sustainable Energy Reviews, 149 . ISSN 1364-0321

Chong, Chin Yee (2021) Corrosion resistance enhancement of hydroxypatite and magnesium oxide multilayer coating on magnesium alloy az31 via electrophoretic deposition. PhD thesis, Universiti Teknologi Malaysia.

Chong, William Woei Fong and Lee, Chiew Tin and Lee, Mei Bao (2021) Simulating thermo-hydrodynamic lubrication of turbocharger journal bearing. Jurnal Tribologi, 30 . pp. 13-23. ISSN 2289-7232

Chow, Z. P. and Ahmad, Z. and Wong, K. J. and Syed Abdullah, S. I. B. (2021) Experimental and numerical analyses of temperature effect on glare panels under quasi-static perforation. Composite Structures, 275 . ISSN 0263-8223

Dairobi G., A. and Wahid, M. A. and Mazlan, M. A. and Azeman, M. H. (2021) Early assessment of asymmetric vortex small rotating detonation engine. Evergreen, 8 (1). pp. 182-186. ISSN 2189-0420

Danial, M. and Hasan, A. and Salman Leong, M. and Hee, L. M. and Ahmad, Z. A. B. (2021) Frequency domain decomposition method: A comparative study on signal processing for unbiased damping ratio estimates. In: 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020, 25 - 26 June 2020, Selangor, Malaysia.

Didik Nurhadiyanto, Didik Nurhadiyanto and Mujiyono, Mujiyono and Mukhammad, A. F. H. and Setyoko, M. B. and Yahya, M. Y. and Riyadi, T. W. B. (2021) Drop test resistance on ramie fiber bulletproof panels based on harvest time and fiber treatment of ramie. Composites: Mechanics, Computations, Applications, 12 (1). pp. 1-16. ISSN 2152-2057

Dzakaria, Afandi (2021) Surrogate-based modeling strategy for design optimization of passenger car suspension system. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Dzakaria, Afandi and Abu Bakar, Saiful Anuar and Mansor, Shuhaimi (2021) Feasibility study of surrogate model for the application of vehicle suspension system. Journal of Transport System Engineering, 8 (1). pp. 15-28. ISSN 2289–9790

Dzulkifli, Mohd. Haziq (2021) Characterisation and optimisation of flame-retarding palm oil-based polyurethane/montmorilloniteammonium polyphosphate foam. PhD thesis, Universiti Teknologi Malaysia.

Era Febriana Aqidawati, Era Febriana Aqidawati and Sutopo, Wahyudi and Pujiyanto, Eko and Fakhrina Fahma, Fakhrina Fahma and Ma’aram, Azanizawati (2021) A framework for developing model for measuring readiness, economic benefits, and economic feasibility of standard implementation: A case study. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 - 11 March 2021, Virtual, Online.

Fadil, Nor Akmal and Yusof, Siti Zahira and Abu Bakar, Tuty Asma and Ghazali, Habibah and Mat Yajid, Muhamad Azizi and Osman, Saliza Azlina and Ourdjini, Ali (2021) Tin whiskers’ behavior under stress load and the mitigation method for immersion tin surface finish. Materials, 14 (22). pp. 1-16. ISSN 1996-1944

Faizal, H. M. and Nyakuma, B. B. and Rahman, M. R. A. and Rahman, M. M. and Kamaruzaman, N. B. and SyahrullailSchool, S. (2021) Comprehensive review on high hydrogen permselectivity of palladium based membranes: part ii -hydrogen permeation flux under concentration polarisation influence. Johnson Matthey Technology Review, 65 (1). pp. 77-86. ISSN 2056-5135 (Submitted)

Fallahiarezoudar, Ehsan and Ahmadipourroudposht, Mohaddeseh and Ngadiman, Nor Hasrul Akhmal (2021) An empirical regression model toward optimized ergonomic conditions for monitoring room operators using RSM. Facilities, 39 (7/8). pp. 449-469. ISSN 0263-2772

Fallahpour, Alireza and Barri, Kaveh and Wong, Kuan Yew and Jiao, Pengcheng and Alavi, Amir H. (2021) An integrated data mining approach to predict electrical energy consumption. International Journal of Bio-Inspired Computation, 17 (3). pp. 142-153. ISSN 1758-0366

Fallahpour, Alireza and Wong, Kuan Yew and Rajoo, Srithar and Tian, Guangdong (2021) An evolutionary-based predictive soft computing model for the prediction of electricity consumption using multi expression programming. Journal of Cleaner Production, 283 . p. 125287. ISSN 0959-6526

Fallahpour, Alireza and Yazdani, Morteza and Mohammed, Ahmed and Wong, Kuan Yew (2021) Green sourcing in the era of industry 4.0: towards green and digitalized competitive advantages. Industrial Management and Data Systems, 121 (9). pp. 1997-2025. ISSN 0263-5577

Fan, Luming and Tian, Bo and Chong, Cheng Tung and Mohd. Jaafar, Mohammad Nazri and Tanno, Kenji and McGrath, Dante and de Oliveira, Pedro M. and Rogg, Bernd and Hochgreb, Simone (2021) The effect of fine droplets on laminar propagation speed of a strained acetone-methane flame: experiment and simulations. Combustion and Flame, 229 . ISSN 0010-2180

Farid, A. A. and Sharif, S. and Idris, M. H. (2021) Performance and wear mechanisms of uncoated, tialn, and altin-coated carbide tools in high-speed drilling of al-si alloy. International Journal of Advanced Manufacturing Technology, 113 . ISSN 0268-3768

Fitriadhy, Ahmad and Dewa, Syarifuddin and Mansor, Nurul Aqilah and Adam, Nur Amira and Ng, Cheng Yee and Kang, Hooi Siang (2021) CFD investigation into seakeeping performance of a training ship. CFD Letters, 13 (1). pp. 19-32. ISSN 2180-1363

Foong, Faruq Muhammad and Thein, Chung Ket and Yurchenko, Daniil (2021) A novel high-power density, low-frequency electromagnetic vibration energy harvester based on anti-phase motion. Energy Conversion and Management, 238 . p. 114175. ISSN 0196-8904

Ganasan, Hema Vharman and Md. Zain, Mohd. Zarhamdy and Ab. Wahid, Mastura and Mohamed Hussein, Mohamed Hussein and Jamaludin, Azman (2021) Performance testing of pico hydropower turbine prototype. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 - 27 October 2021, Virtual, Online.

Gang, M. and Kamaruddin, M. H. and Kang, H. S. and Goh, P. S. and Kim, M. H. and Lee, K. Q. and Ng, C. Y. (2021) Watertight integrity of underwater robotic vehicles by self-healing mechanism. Ain Shams Engineering Journal, 12 (2). ISSN 2090-4479

Ghandvar, H. and Jabbar, K. A. and Idris, M. H. and Ahmad, N. and Jahare, M. H. and Koloor, S. S. R. (2021) Influence of barium addition on the formation of primary mg2si crystals from al-mg-si melts. Journal of Materials Research and Technology, 11 . ISSN 2238-7854

Ghazali, H. and Amir, A. N. F. and Ye, L. and Dullah, S. (2021) Fracture toughness of epoxy adhesive containing dual-capsules self-healing system. In: 6th International Conference on Green Design and Manufacture 2020, IConGDM 2020, 23 - 24 July 2020, Arau, Perlis.

Ghazali, Habibah and Ye, Lin and Amir, Amie N. (2021) Microencapsulated healing agents for an elevated-temperature cured epoxy: influence of viscosity on healing efficiency. Polymers and Polymer Composites, 29 (9). S1317-S1327. ISSN 0967-3911

Gholami, Hamed and Abu, Falah and Lee, Jocelyn Ke Yin and Karganroudi, Sasan Sattarpanah and Sharif, Safian (2021) Sustainable manufacturing 4.0-pathways and practices. Sustainability (Switzerland), 13 (24). p. 13956. ISSN 2071-1050

Goh, P. S. and Kang, H. S. and Ismail, A. F. and Hilal, N. (2021) The hybridization of thermally-driven desalination processes: The state-of-the-art and opportunities. Desalination, 506 . p. 115002. ISSN 0011-9164

Hadi, M. Sukri and M. Darus, Intan Z. and Ab. Talib, Mat Hussin and Yatim, Hanim M. and Tokhi, M. Osman (2021) Vibration suppression of the horizontal flexible plate using proportional– integral–derivative controller tuned by particle swarm optimization. Journal of Low Frequency Noise Vibration and Active Control, 40 (3). pp. 1540-1557. ISSN 1461-3484

Hamdan, Hartini and Nasaruddin, Noorannisa Irdina and Redzuan, Nor Qayrawani and Chong, William Woei Fong and Nor Hadi, Norulakmal (2021) Friction analysis of Waste Palm Methyl Ester (WPME) under Stribeck lubrication regimes. In: 4th International Symposium on Green and Sustainable Technology, ISGST 2021, 3 - 6 October 2021, Kampar, Malaysia.

Hamdan, Siti Hartini and Lee, Chiew Tin and Lee, Mei Bao and Chong, William Woei Fong and Chong, Cheng Tung and Mohd. Sanip, Suhaila (2021) Synergistic nano-tribological interaction between zinc dialkyldithiophosphate (ZDDP) and methyl oleate for biodiesel-fueled engines. FRICTION, 9 (3). pp. 612-626. ISSN 2223-7690

Hamzah, E. and Anuar, Z. Z. and Arudi, I. S. and Ibrahim, M. K. and Bahador, A. and Khaatak, A. (2021) Influence of fabrication methods on the microstructures and hardness of Ti-Ni, Ti-Nb and Ti-Ta for biomedical applications. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Harun, Mohamad Hafiz (2021) Rollover warning system for tractor-semitrailer using a modified odenthal rollover index algorithm. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Harun, Mohamad Hafiz and Hudha, Khisbullah and Mohd. Samin, Pakharuddin and Abu Bakar, Saiful Anuar and Abd. Kadir, Zulkiffli (2021) A new approach in modelling of hitch joint of a tractor semi-trailer using virtual Pacejka tyre model. International Journal of Heavy Vehicle Systems, 28 (2). pp. 262-290. ISSN 1744-232X

Harun, Mohamad Hafiz and Hudha, Khisbullah and Mohd. Samin, Pakharuddin and Abu Bakar, Saiful Anuar and Amer, Noor Hafizah and Abd. Kadir, Zulkiffli (2021) A modified odenthal rollover index algorithm for tractor-semitrailer using steering and vehicle speed inputs. International Journal of Heavy Vehicle Systems, 28 (4). pp. 563-584. ISSN 1744-232X

Hasan, Mohd. Faizal and Nyakuma, Bemgba Bevan and Abdul Rahman, Mohd. Rosdzimin and Othman, Norazila and Ahmad, Norhayati and Muhamad Said, Mohd. Farid (2021) Torrefaction of palm kernel shell and petcoke blends for various mixing ratios and temperatures. Annales de Chimie: Science des Materiaux, 45 (6). pp. 477-484. ISSN 0151-9107

Hashmi, M. H. and Hamid, M. F. A. and Latif, A. A. and Tamin, M. N. and Khattak, M. A. (2021) Fractal dimensions of a propagating fatigue crack in metallic materials. Journal of Failure Analysis and Prevention, 21 (5). pp. 1644-1651. ISSN 1547-7029

Hatem, N. and Yusof, Y. and A. Kadir, A. Z. and Latif, K. and Mohammed, M. A. (2021) Interpreting the G-code of drilling machining to use in open CNC controller machine. In: International Laser Technology and Optics Symposium in Conjunction with Photonics Meeting 2020, ILATOSPM 2020, 22 October 2020 - 23 October 2020, Johor Bahru, Johor.

Hatem, N. and Yusof, Y. and A.Kadir, A. Z. and Latif, K. and Mohammed, M. A. (2021) A novel integrating between tool path optimization using an ACO algorithm and interpreter for open architecture CNC system. Expert Systems with Applications, 178 . ISSN 0957-4174

Heidari, M. and Karimzadeh, A. and Ayatollahi, M. R. and Yahya, M. Y. (2021) Effects of particle distribution and calculation method on results of nano-indentation technique in heterogeneous nanocomposites-experimental and numerical approaches. International Journal of Solids and Structures, 225 . ISSN 0020-7683

Hoseini, S. A. and Fallahpour, A. and Wong, K. W. (2021) Developing an integrated model for evaluating R&D organizations’ performance: combination of DEA-ANP. Technological and Economic Development of Economy, 27 (4). ISSN 2029-4913

Hoseini, Seyed Amirali and Fallahpour, Alireza and Wong, Kuan Yew and Mahdiyar, Amir and Saberi, Morteza and Durdyev, Serdar (2021) Sustainable supplier selection in construction industry through hybrid fuzzy-based approaches. Sustainability (Switzerland), 13 (3). pp. 1-19. ISSN 2071-1050

Husin, Norafifah (2021) Optimization of polyethersulfone ultrafiltration hollow fiber membrane fouling performances using particle swarm optimization. PhD thesis, Universiti Teknologi Malaysia.

Hussin, R. and Sharif, S. and Abd. Rahim, S. Z. and Suhaimi, M. A. and Khushairi, M. T. and EL-Hadj, A. A. and Shuaib, N. A. (2021) The potential of metal epoxy composite (MEC) as hybrid mold inserts in rapid tooling application: a review. Rapid Prototyping Journal, 27 (6). pp. 1069-1100. ISSN 1355-2546

Hussin, Radhwan and Sharif, Safian (2021) Hybrid mold: Comparative study of rapid and hard tooling for injection molding application using Metal Epoxy Composite (MEC). Materials, 14 (3). p. 665. ISSN 1996-1944

Ibrahim, Nasiru I. and Al-Sulaiman, Fahad A. and Rehman, Shafiqur and Saat, Aminuddin and Ani, Farid Nasir (2021) Economic analysis of a novel solar-assisted air conditioning system with integral absorption energy storage. Journal of Cleaner Production, 291 . ISSN 0959-6526

Idris, R. and Chong, W. W. F. and Ali, A. and Idris, S. and Tan, W. H. and Md. Salim, R. and Mong, G. R. and Chongh, C. T. (2021) Pyrolytic oil with aromatic-rich hydrocarbons via microwave-induced in-situ catalytic co-pyrolysis of empty fruit bunches with a waste truck tire. Energy Conversion and Management, 244 . ISSN 0196-8904

Idris, Rubia (2021) Optimisation of pyrolysis oil through microwave-induced in-situ co-pyrolysis of waste truck tire and empty fruit bunch Creator. PhD thesis, Universiti Teknologi Malaysia.

Idris, Rubia and Chong, William Woei Fong and Ali, Atikah and Idris, Sidah and Hasan, Mohd Faizal and Ani, Farid Nasir and Chong, Cheng Tung (2021) Phenol-rich bio-oil derivation via microwave-induced fast pyrolysis of oil palm empty fruit bunch with activated carbon. Environmental Technology and Innovation, 21 . p. 101291. ISSN 2352-1864

Ismail, Ainaa Maya Munira and Mohd. Ali, Zurriati and Md. Isa, Kamariah and Abdullah, Mohammad and Mohd. Zawawi, Fazila (2021) Study on the potentiality of power generation from exhaust air energy recovery wind turbine: a review. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87 (3). pp. 148-171. ISSN 2289-7879

Ismail, Noor Iswadi and Mohd. Ali, Zurriati and Ishak, Iskandar Shah and Noor, R. M. and Rabilah, Rosniza (2021) Aerodynamic performances of paper planes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (1). pp. 124-131. ISSN 2289-7879

Jamal, N. N. and Abang Jawawi, D. N. and Hassan, R. and Mamat, R. (2021) Conceptual model of learning computational thinking through educational robotic. International Journal of Emerging Technologies in Learning, 16 (15). ISSN 1868-8799

Jamali, A. and Mat Darus, I. Z. and Talib, M. H. A. and Yatim, H. M. and Hadi, M. S. and Tokhi, M. O. (2021) Intelligent tuning of pid controller for double-link flexible robotic arm manipulator by artificial bee colony algorithm. In: 2nd International Conference on Sensor Networks and Signal Processing, SNSP 2019, 19 - 22 November 2019, Hualien, Taiwan.

Jamari, J. and Ammarullah, Muhammad Imam and Md. Saad, Amir Putra and Syahrom, Ardiyansyah and Uddin, Mohammad and Heide, Emile van der and Basri, Hasan (2021) The effect of bottom profile dimples on the femoral head on wear in metal-on-metal total hip arthroplasty. Journal of Functional Biomaterials, 12 (2). pp. 1-14. ISSN 2079-4983

Jeannot, I. and Rahman, M. M. and Saat, A. and Mohd. Faizal, H. and Abdul Wahid, M. (2021) Thermodynamic evaluation of a solar based kalina cycle. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 March 2021 - 11 March 2021, Virtual, Online.

Jia, X. and Varbanov, P. S. and Alwi, S. R. W. and Yang, D. and Klemeš, J. J. (2021) Cost-based quantitative-qualitative water footprint considering multiple contaminants. Resources, Conservation and Recycling, 168 . ISSN 0921-3449

Jiran, Nur Syamimi (2021) Life cycle activity-based costing methodology for wastewater treatment using membrane system. PhD thesis, Universiti Teknologi Malaysia.

Johari, M. Syazwan and M. Ali, Zurriati and Wisnoe, Wirachman and Ismail, Noriswadi and Ishak, Iskandar S. (2021) Computational aerodynamic analysis of UiTM's Hawkeye UAV aircraft. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 295-302. ISSN 1990-7710

Johnson, Charles A. N. and Daud, Mohd. Fadzil and Arsat, Mahyuddin and Wan Hussin, Wan Nazdah and Egba, Ernest Ituma (2021) The effect of computer software interaction on students cognitive abilities enhancement: the case of engineering educators’ perspective. International Journal of Emerging Technologies in Learning, 16 (18). pp. 228-241. ISSN 1868-8799

Kamalulzaman, Nur Farah Hanis and Azman, Nurul Farhanah and Musa, Mohamad Nor and Samion, Syahrullail (2021) Experimental investigation of the effectiveness of jet impingement cooling system on the pressure side of the turbine blade. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 84 (1). pp. 33-42. ISSN 2289-7879

Kamaruzaman, N. and Kok, Y. H. and Abdul Manaf, N. and Ku Azman Shah, K. N. A. and Mohd. Yusop, M. Z. and Mohd. Rohani, J. and Fadil, N. A. and Hasan, M. F. and Mohd. Yasin, M. F. and Kamaruzaman, N. (2021) Modelling and control analysis of bamboo-based gasification: towards the modern renewable energy. Chemical Engineering Transactions, 889 . pp. 223-228. ISSN 2283-9216

Kasim, Khushairi Amri and Mat, Shabudin and Ishak, Iskandar Shah and Mansor, Shuhaimi (2021) Propeller locations study of a generic delta wing UAV model. Aircraft Engineering and Aerospace Technology, 93 (1). pp. 127-138. ISSN 1748-8842

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2021) Effect of heat treatment on modulus hardening and phase transformation in experimental 7xxx stir-cast alloy from recycled beverage cans. Materials Today: Proceedings, 39 (Part 2). pp. 1056-1060. ISSN 2214-7853

Kazeem, Abubakar and Rady, Mohammed H. and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz and Suhaimi, Mohd. Azlan and Jikan, Suzi S. and Abd. Rahim, Shayfull Zamree and Sharif, Safian (2021) Effect of processing conditions on the fracture behavior of Al-5Zn-1.5Mg-1.0Mn-0.35Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam applications. In: 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020, 26 - 27 November 2020, Langkawi, Malaysia.

Khan, Muhammad Salman (2021) Damage mechanics-based model for the deformation response and failure of composite honeycomb core structure. PhD thesis, Universiti Teknologi Malaysia.

Khan, Muhammad Salman and Abdul Latif, Ainullotfi and Koloor, Seyed Saeid Rahimian and Petru, Michal and Tamin, Mohd. Nasir (2021) Representative cell analysis for damage-based failure model of polymer hexagonal honeycomb structure under the out-of-plane loadings. Polymers, 13 (1). pp. 1-23. ISSN 2073-4360

Kim, Jeyoung and Rajoo, Srithar (2021) A numerical study on turbocharging system for PFI-SI type hydrogen combustion engine. In: SAE 15th International Conference on Engines and Vehicles, ICE 2021, 12 September 2021 - 16 September 2021, Capri, Italy.

Kim, Namsu and Kim, Yongmo and Mohd. Jaafar, Mohammad Nazri and Rahim, Muhammad Roslan and Said, Mazlan (2021) Effects of hydrogen addition on structure and NO formation of highly CO-Rich syngas counterflow nonpremixed flames under MILD combustion regime. International Journal of Hydrogen Energy, 46 (17). pp. 10518-10534. ISSN 0360-3199

Kob, M. S. C. and Mazali, I. I. and Daud, Z. H. C. and Asus, Z. and Darus, I. Z. M. (2021) Simulation of electro-mechanical friction clutch control using proportional derivative plus conditional integral control scheme for automotive application. International Journal of Advanced Mechatronic Systems, 9 (1). pp. 38-44. ISSN 1756-8412

Koloor, S. S. R and Karimzadeh, A. and Abdullah, Mohamed Ruslan and Petru, M. and Yidris, N. and Sapuan, S. M. and Tamin, M. N. (2021) Linear-nonlinear stiffness responses of carbon fiber-reinforced polymer composite materials and structures: a numerical study. Polymers, 13 (3). pp. 1-22. ISSN 2073-4360

Kori, Mohamad Ikhwan (2021) Stent strut configurations for patent ductus arteriosus morphologies using computational fluid dynamics analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Ku Azman Shah, K. N. A. and Mohd. Yusop, M. Z. and Mohd. Rohani, J. and Fadil, N. A. and Abdul Manaf, N. and Hartono, B. and Tuyen, N. D. and Masaki, T. and Ahmad, A. S. and Ramli, A. (2021) Feasibility study on biomass bamboo renewable energy in Malaysia, Indonesia, Vietnam and Japan. Chemical Engineering Transactions, 89 . pp. 127-132. ISSN 2283-9216

Ku Azman Shah, Ku Nur Afrina and Mohd. Yusop, Mohd. Zamri and Mohd. Rohani, Jafri and Fadil, Nor Akmal and Hasan, Mohd. Faizal and Mohd. Yasin, Mohd. Fairus and Kamaruzaman, Natrah and Engku Abu Bakar, Engku Mohd. Nazim and Samion, Syahrullail and Yahya, Mohd. Yazid and Abdul Manaf, Norhuda and Hartono, Budi and Tuyen, Nguyen Duc and Masaki, Tanemura and Ahmad, Abdul Samad and Ramli, Ashaari (2021) Solar and biomass potential of renewable energy in selected ASEAN countries and Japan. In: 1st International Conference of Advanced Research on Renewable Energy for Universal Sustainability, 22 June 2021 - 24 June 2021, Kuala Lumpur, Virtual.

Kumareswaran, D. and Nasir, N. and Abd. Rahman, M. Z. and Supa’at, A. S. M. (2021) Computational speed and qualitative assessment of real-time image stitching algorithm. In: 2021 International Conference on Communication, Control and Information Sciences, ICCISc 2021, 16 June 2021 - 18 June 2021, Virtual, India.

Latif, Kamran and Adam, Anbia and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2021) A review of G code, STEP, STEP-NC, and open architecture control technologies based embedded CNC systems. International Journal of Advanced Manufacturing Technology, 114 (9-10). pp. 2549-2566. ISSN 0268-3768

Lee, Jocelyn Ke Yin and Gholami, Hamed and Mat Saman, Muhamad Zameri and Akhmal, Nor Hasrul (2021) Sustainability-oriented application of value stream mapping: A review and classification. IEEE Access, 9 . pp. 68414-68434. ISSN 2169-3536

Li, Lei and Zainal, Muhammad Thalhah and Mohd. Yasin, Mohd. Fairus and Hamzah, Norikhwan and Mohd. Sies, Mohsin and Muhammad Yazid, Muhammad Noor Afiq Witri and Amzin, Shokri and Supee, Aizuddin (2021) The influences of oxygen concentration and external heating on carbon nanotube growth in diffusion flame. CFD Letters, 13 (12). pp. 45-62. ISSN 2180-1363

Liu, Hao and Liu, Zheng and Romagnoli, Alessandro and Martinez Botas, Ricardo F. and Rajoo, Srithar and Padzillah, Muhamad H. (2021) Multi-injection turbine housing for turbine performance improvement: A numerical and experimental analysis. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 235 (3). pp. 368-382. ISSN 0957-6509

Low, Kean Ong and Johar, Mahzan and Israr, Haris Ahmad and Gan, Khong Wui and Koloor, Seyed Saeid Rahimian and Petru, Michal and Wong, King Jye (2021) Displacement rate effects on the mode II shear delamination behavior of carbon fiber/epoxy composites. Polymers, 13 (11). pp. 1-18. ISSN 2073-4360

M. Shaiful, A. I. and Rahim, Muhammad Roslan and Mohd. Jaafar, Mohammad Nazri (2021) Spray angle characteristics of carotino-diesel blends. In: 6th International Conference on Green Design and Manufacture 2020, IConGDM 2020, 23 July 2020 - 24 July 2020, Arau, Perlis, Malaysia.

Mad Asasaari, Siti Faizah (2021) Temperature and strain-rate dependent damage-based models for lead-free solder interconnects. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Madan, I. and Tajuddin, N. and Said, M. and Mat, S. and Othman, N. and Wahid, M. A. and Radzi, N. H. M. and Miau, J. J. and Chen, Y. R. and Chen, L. Y. (2021) Influence of active flow control on blunt-edged VFE-2 delta wing model. International Journal of Automotive and Mechanical Engineering, 18 (1). ISSN 2229-8649

Mahmood, Salwa and Hassan, Mohd. Fahrul and Hemdi, Abdul Rahman and Kafuku, John Mbogo and Mat Saman, Muhamad Zameri (2021) Sustainability assessment for Small and Medium Enterprise (SMEs) by using fuzzy logic approach: A direction and further research. International Journal of Integrated Engineering, 13 (2). pp. 10-15. ISSN 2229-838X

Majeed, Faraj Saeid Adrees and Mohd. Yusof, Nordin and Suhaimi, Mohd. Azlan and Ahmad, Rosli and Asmael, Mohammed Basher and Yusof, Mohd. Sallehuddin (2021) Outcome of mix Ce and Er addition on solidification microstructure of the LM25 ( Al-7Si-alloy). In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Maldar, N. and Ng., C. Y. and Fitriadhy, A. and Kang, H. S. (2021) Numerical investigation of an efficient blade design for a flow driven horizontal axis marine current turbine. In: 6th International Conference on Civil, Offshore and Environmental Engineering, ICCOEE 2020, 13 July 2021 - 15 July 2021, Kuching, Sarawak.

Mariusz Deja, Mariusz Deja (2021) Applications of additively manufactured tools in abrasive machining—A literature review. Materials, 14 (5). p. 1318. ISSN 1996-1944

Mat, Mohamad Nur Hidayat and Md. Basir, Md. Faisal and Asmuin, Nor Zelawati (2021) Response surface analysis of DIB nozzle geometry on acoustic power level using central composite design of experiment. In: 1st International Conference on Material Processing and Technology, ICMProTech 2021, 14 - 15 July 2021, Perlis, Virtual.

Mat, Mohamad Nur Hidayat and Md. Basir, Md. Faisal and Sies, Mohamad Farid (2021) Velocity flow field characteristic on nozzle cavity using central composite design of computational method for dry ice blasting system. In: 1st International Conference on Material Processing and Technology, ICMProTech 2021, 14 - 15 July 2021, Perlis, Virtual.

Mat Darus, I. Z. and Al-Khafaji, Ali A. M. (2021) Bio-inspired algorithms for modeling and control of underwater flexible single-link manipulator. In: 2nd International Conference on Sensor Networks and Signal Processing, SNSP 2019, 19 - 22 November 2019, Hualien, Taiwan.

Mat Razi, Muhammad Fikri Irsyad and Che Daud, Zul Hilmi and Asus, Zainab and Mazali, Izhari Izmi and Ardani, Mohd. Ibtisyam and Abdul Hamid, Mohd. Kameil (2021) A review of internal resistance and temperature relationship, state of health and thermal runaway for lithium-ion battery beyond normal operating condition. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 88 (2). pp. 123-132. ISSN 2289-7879

Mat Zaid, Mohammad Zahari Sukimi (2021) Coal combustion prediction analysis tool for ultra supercritical thermal power plant. PhD thesis, Universiti Teknologi Malaysia.

Mazali, Izhari Izmi and Sakri @ Roslan, Izzat Asyraf and Che Daud, Zul-Hilmi and Asus, Zainab and Che Kob, Mohd. Salman and Abdul Hamid, Mohd. Kameil (2021) Rechargeable battery system for small scale electric vehicle. Journal of Transport System Engineering, 8 (2). pp. 16-20. ISSN 2289–9790

Mazlan, Mohamad Zahid and Mohd. Zawawi, Fazila and Tahzib, Teeab and Ismail, Kamarulafizam and Samion, Syahrullail (2021) Performance analysis of highway wind turbine enhanced with wind guide vanes using the Taguchi method. CFD Letters, 13 (3). pp. 25-42. ISSN 2180-1363

Mazlan, Muhammad Amri and Mohd. Yasin, Mohd. Fairus and Saat, Aminuddin and Abdul Wahid, Mazlan (2021) Initiation characteristics of rotating supersonic combustion engine. Evergreen, 8 (1). pp. 177-181. ISSN 2189-0420

Md. Naiem, Mohd. Azzeri and Othman, Ezzul Hanis and Maimun, Adi and Ali, Arifah and Adnan, Faizul Amri and Wilson, Philip A. and Md. Zain, Mohd. Zarhamdy (2021) Drag analysis of three rudder-shaped like bodies. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (1). pp. 11-22. ISSN 2289-7879

Md. Yusop, Abdul Hakim and Ulum, Mokhamad Fakhrul and Al Sakkaf, Ahmed and Hartanto, Djoko and Nur, Hadi (2021) Insight into the bioabsorption of Fe‐based materials & their current developments in bone applications. Biotechnology Journal, 16 (12). ISSN 1860-6768

Md. Zain, M. Z. and Napiah, N. A. A. and Shadan, M. A. and Sadiq, T. O. and Mohamad, S. N. A. and Nor, N. S. M. and Fadil, N. A. (2021) Electrode materials application and performance for seawater power source. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Mesbah, M. and Fattahi, A. and Bushroa, A. R. and Faraji, G. and Wong, K. Y. and Basirun, W. J. and Fallahpour, A. and Nasiri-Tabrizi, B. (2021) Experimental and modelling study of ultra-fine grained ZK60 magnesium alloy with simultaneously improved strength and ductility processed by parallel tubular channel angular pressing. Metals and Materials International, 27 (2). pp. 277-297. ISSN 1598-9623

Misnal, Mohd. Fadthul Ikmal and Redzuan, Norizah and Zainal, Muhamad Nor Firdaus and Raja Ibrahim, Raja Kamarulzaman and Ahmad, Norhayati and Agun, Linda (2021) Emerging cold plasma treatment on rice grains: A mini review. Chemosphere, 274 . p. 129972. ISSN 0045-6535

Mochamad Asrofi, Mochamad Asrofi and Sapuan, S. M. and Ilyas, R. A. and Ramesh, M. (2021) Characteristic of composite bioplastics from tapioca starch and sugarcane bagasse fiber: Effect of time duration of ultrasonication (Bath-Type). In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 - 6 August 2020, Pekan, Pahang, Malaysia.

Mohamad, Nura Mu'az (2021) Hydrothermal performance of aluminium oxide/water and cupper oxide/water nanofluids in divergent-convergent minichannel heatsink with dimples. PhD thesis, Universiti Teknologi Malaysia.

Mohammad R. Zaraa Allah, Zaraa Allah and Mohamed Kamar, Haslinda and Wong, Keng Yinn (2021) Thermal comfort investigation in UTHM Library and the influence of clothing on adaptive thermal comfort. Design Engineering, 2021 (8). pp. 16071-16089. ISSN 0011-9342

Mohammed, Fareeduddin and Hassan, Adnan and Selim, Shokri Z. (2021) Robust design of a closed-loop supply chain considering multiple recovery options and carbon policies under uncertainty. IEEE Access, 9 . pp. 1167-1189. ISSN 2169-3536

Mohammed Razzaq, Alaa and Majid, Dayang Laila and Basheer, Uday M. and Aljibori, Hakim S. Sultan (2021) Research summary on the processing, mechanical and tribological properties of aluminium matrix composites as effected by fly ash reinforcement. Crystals, 11 (10). pp. 1-20. ISSN 2073-4352

Mohd. Fuad, Muhammad Ariff Hanaffi and Loijon, Eljoji J. A. and Hasan, Mohd. Faizal and Abdul Rahman, Mohd. Rosdzimin and Nyakuma, Bemgba B. and Mad Saad, Shaharil (2021) Torrefaction of oil palm frond petiole: effect of particle sizes, sections and batches. Journal of Energy & Safety Technology (JEST), 4 (1). pp. 7-17. ISSN 2637-1030

Mohd. Hanid, Mohd. Hazwan and Abd. Rahim, Shayfull Zamree and Gondro, Joanna and Sharif, Safian and Al Bakri Abdullah, Mohd. Mustafa and Mohd. Zain, Azlan and Abdellah, Abdellah El-Hadj and Mat Saad, Mohd. Nasir (2021) Warpage optimisation on the moulded part with straight drilled and conformal cooling channels using Response Surface Methodology (RSM), Glowworm Swarm Optimisation (GSO) and Genetic Algorithm (GA) Optimisation Approaches. Materials, 14 (6). pp. 1-19. ISSN 1996-1944

Mohd. Khairi, Danial and Abas, Mohd. Azman and Muhamad Said, Mohd. Farid and Wan Salim, Wan Saiful Islam (2021) Fuel consumption mathematical models for road vehicle – a review. Progress in Energy and Environment, 16 (NA). pp. 59-71. ISSN 2600-7762

Mohd. Nizam, M. Z. and Mad Saad, S. and Hussein, M. and Ahmad, Z. A. and Suhaimi, M. A> (2021) Design of a single electromagnetic braille cell. International Journal of Engineering Trends and Technology, 69 (8). pp. 155-160. ISSN 2349-0918

Mohd. Nizam, Muhamad Zulhairi and Mad Saad, Shaharil and Suhaimi, Mohd. Azlan and Mat Dzahir, Mohd. Azuwan and Abd. Rahim, Shayfull Zamree and Mat Dzahir, Mohd. Azwarie (2021) Development of Al-Quran sign language classification based on convolutional neural network. In: 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020, 26 - 27 November 2020, Langkawi, Malaysia.

Mohd. Nizam, Muhamad Zulhelmi and Mad Saad, Shaharil and Suhaimi, Mohd. Azlan and Mohamed Hussein, Mohamed Hussein and Abd. Rahim, Shayfull Zamree and Ahmad, Zair Asrar (2021) Development of electromagnetic actuator for braille cell. In: 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020, 26 - 27 November 2020, Langkawi, Malaysia.

Mohd. Salleh, Zuan Azhary and Samion, Syahrullail and Ngadi, Norzita and Ruslan, Nurun Najwa (2021) Friction study on chemically modified RBD PK oil as a potential renewable resource. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43 (3). ISSN 1678-5878

Mohd. Salleh, Zuliazura and Osman, Kahar and Marian, Mohd. Fairuz and Mat Hassan, Nik Normunira and Madon, Rais Hanizam and Samiran, Nor Afzanizam and Abd. Rashid, Razlin and Ishak, Izuan Amin and Darlis, Nofrizalidris (2021) Rapid prototyping 3D model for PIV: Application in human trachea model flow analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 65-73. ISSN 2289-7879

Mohd. Saufi, M. S. R. and Hassan, K. A. (2021) Remaining useful life prediction using an integrated Laplacian-LST< network on machinery components. Applied Soft Computing, 112 . ISSN 1568-4946

Mohd. Saufi, Mohd. Syahril Ramadhan and Hassan, Kamarul Arifin (2021) Remaining useful life prediction using an integrated Laplacian-LSTM network on machinery components. Applied Soft Computing, 112 (NA). pp. 1-14. ISSN 1568-4946

Mohd. Yamin, A. H. and Mat Darus, I. Z. and Mohd. Nor, Nur Safwati and Ab. Talib, M. H. (2021) Intelligent cuckoo search algorithm of PID and skyhook controller for semi-active suspension system using magneto-rheological damper. Malaysian Journal of Fundamental and Applied Sciences, 17 (4). pp. 402-415. ISSN 2289-599X

Mohd. Yunos, Yushazaziah (2021) Improvement of small channel heat transfer correlation using genetic algorithm for R290 refrigerant. PhD thesis, Universiti Teknologi Malaysia.

Mohd. Zaidan, Nurhanna (2021) Water filtration performance comparison of sayong ball clay membrane produced by gel casting and spark plasma sintering methods. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Mohd. Zaidan, Nurhanna and Ahmad, Norhayati and Nakamura, Yuzo and Abubakar, Muazu (2021) Sayong ball clay membrane for copper and nickel removal from effluent. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 131-138. ISSN 2289-7879

Mong, G. R. and Chong, W. W. F. and Mohd. Nor, S. A. and Ng, J. H. and Chong, C. T. and Idris, R. and Too, J. and Chiong, M. C. and Abas, M. A. (2021) Pyrolysis of waste activated sludge from food manufacturing industry: thermal degradation, kinetics and thermodynamics analysis. Energy, 235 . ISSN 0360-5442

Mong, Guo Ren and Chong, Cheng Tung and Ng, Jo Han and Chong, William Woei Fong and Ong, Hwai Chyuan and Tran, Manh Vu (2021) Multivariate optimisation study and life cycle assessment of microwave-induced pyrolysis of horse manure for waste valorisation and management. Energy, 216 . p. 119194. ISSN 0360-5442

Mong, Guo Ren and Chong, William Woei Fong and Mohd. Nor, Siti Aminah and Ng, Jo-Han and Chong, Cheng Tung and Ani, Farid Nasir (2021) Pyrolysis behaviour and kinetic analysis of food waste sludge cake. Chemical Engineering Transactions, 83 . pp. 253-258. ISSN 2283-9216

Mong, Guo Ren and Chong, William Woei Fong and Ng, Jo Han and Chong, Cheng Tung and Idris, Rubia and Abas, Mohd. Azman and Chiong, Meng Choung (2021) Co-pyrolysis of empty fruit bunch and waste tire: A kinetics and synergism analysis. Chemical Engineering Transactions, 89 . pp. 13-18. ISSN 2283-9216

Mustafa, N. S. and Akhmal, N. H. and Izman, S. and Ab. Talib, M. H. and Shaiful, A. I. M. and Omar, M. N. and Yahaya, N. Z. and Illias, S. (2021) Application of computational method in designing a unit cell of bone tissue engineering scaffold: a review. Polymers, 13 (10). ISSN 2073-4360

Nafisah, Suratun and Morsin, Marlia and Sanudin, Rahmat and Nayan, Nafarizal and Mohd. Yusop, Mohd. Zamri and Razali, Nur Liyana and Md. Shah, Nur Zehan An’Nisa (2021) Effect of additive acid on seeded growth of gold nanobipyramids. Journal of Physics and Chemistry of Solids, 148 (NA). pp. 1-11. ISSN 0022-3697

Nanda, Is Prima and Ali, Zahran and Anuar, Nur Farah Bazilah Wakhi and Idris, Mohd Hasbullah and Arafat, Andril (2021) Effect of forging temperature on biodegradable MG-0.7%ca alloy properties for implant application. In: 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020, 25-26 June 2020, Selangor.

Nasution, A.K. and Gustiani, D. and Handoko, A. and Mukhtar, Mukhtar and Zulkarnain, Zulkarnain and Arafat, A. and Idris, M. H. and Ramlee, M. H. (2021) A preliminary study of fabrication technology for dynamic compression plates using centrifugal casting process. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8772-8780. ISSN 2229-8649

Nazri, S. S. Z. and Hadi, M. S. and Yatim, H. M. and Ab. Talib, M. H. and Darus, I. Z. M. (2021) Modelling of flexible manipulator system via ant colony optimization for endpoint acceleration. In: 1st International Conference on Material Processing and Technology, ICMProTech 2021, 14 - 15 July 2021, Perlis, Virtual.

Nejad, Ali Farokhi and Koloor, Seyed Saeid Rahimian and Syed Hamzah, Syed Mohd. Saiful Azwan and Yahya, Mohd. Yazid (2021) Mechanical behaviour of pin-reinforced foam core sandwich panels subjected to low impact loading. Polymers, 13 (21). pp. 1-17. ISSN 2073-4360

Nejad, Ali Farokhi and Salim, Mohamad Yusuf and Koloor, Seyed Saeid Rahimian and Petrik, Stanislav and Yahya, Mohd. Yazid and Abu Hassan, Shukur and Mohd. Shah, Mohd. Kamal (2021) Hybrid and synthetic FRP composites under different strain rates: a review. Polymers, 13 (19). pp. 1-23. ISSN 2073-4360

Ng, Seng Hooi (2021) Cardiac seismocardiography analysis using 2- elements accelerometer sensor array and beamforming technique. Masters thesis, Universiti Teknologi Malaysia.

Ngadiman, Nor Hasrul Akhmal and Zainal Abidin, Md. Raziff and Murizan, Nur Ilyana Sahira and Mohd. Yusof, Noordin and Idris, Ani and Abdul Kadir, Aini Zuhra (2021) Optimization of materials composition and UV-VIS light wavelength towards curing time performance on development of tissue engineering scaffold. Biointerface Research in Applied Chemistry, 11 (2). pp. 8740-8750. ISSN 2069-5837

Nida An Khofiyah, Nida An Khofiyah and Sutopo, Wahyudi and Muhammad Hisjam, Muhammad Hisjam and Ma’aram, Azanizawati (2021) A framework of performance efficiency measurement in technology transfer office (TTO) for acceleration of commercialization technology. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 - 11 March 2021, Virtual, Online.

Noor Hatem, Noor Hatem and Yusof, Yusri and A. Kadir, Aini Zuhra and Latif, Kamran and Abedlhafd, Mohammed M. (2021) Optimization and execution of multiple holes-drilling operations based on STEP-NC. International Journal of Advanced Manufacturing Technology, 114 (7-8). pp. 2031-2043. ISSN 0268-3768

Noordin, Muhammad Azfar and Md. Saad, Amir Putra and Ngadiman, Nor Hasrul Akhmal and Mustafa, Nur Syahirah and Mohd. Yusof, Noordin and Ma’aram, Azanizawati (2021) Finite element analysis of porosity effects on mechanical properties for tissue engineering scaffold. Biointerface Research in Applied Chemistry, 11 (2). pp. 8836-8843. ISSN 2069-5837

Nur, Rusdi and Mohd. Yusof, Noordin and Sudin, Izman and M. Nor, Fethma and Kurniawan, Denni (2021) Determination of energy consumption during turning of hardened stainless steel using resultant cutting force. Metals, 11 (4). pp. 1-14. ISSN 2075-4701

Okfalisa, O. and Anggraini, W. and Nawanir, G. and Saktioto, S. and Wong, K. Y. (2021) Measuring the effects of different factors influencing on the readiness of smes towards digitalization: a multiple perspectives design of decision support system. Decision Science Letters, 10 (3). pp. 425-442. ISSN 1929-5804

Oleolo, Ibrahim and Abdullah, Hayati and Mohamad, Maziah and Mohd. Jaafar, Mohammad Nazri and Baharain, Akmal and Sulaiman, Sapiah (2021) Multi-circuit air-conditioning system modelling for temperature control. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 83 (2). pp. 14-24. ISSN 2289-7879

Olleh, N. and Kamar, H. M. and Kamsah, N. B. and Alhamid, M. Idrus (2021) Outlets airflow velocity enhancement of an automotive hvac duct. Evergreen, 8 (1). pp. 163-169. ISSN 2189-0420

Onn, Nurfarahin (2021) Model predictive control with angular acceleration constraint of proportional servo-hydraulic lower extremity robotic device. PhD thesis, Universiti Teknologi Malaysia.

Opia, Anthony Chukwunonso and Abdul Hamid, Mohd. Kameil and Syahrullail, Samion and Abd. Rahim, Abu Bakar and Johnson, Charles A. N. (2021) Biomass as a potential source of sustainable fuel, chemical and tribological materials – Overview. In: 2019 Sustainable and Integrated Engineering International Conference, SIE 2019, 9 - 10 December 2019, Putrajaya, Malaysia.

Opia, Anthony Chukwunonso and Mohd. Kameil, Abdul Hamid and Syahrullail, Samion and Mamah, Stanley Chinedu and Izmi, Mazali Izhari and Zul Hilmi, Che Daud and Abu Bakar, Abd. Rahim and Saleh, Abdelgader Agilah (2021) Tribological behavior of organic formulated polymer concentration effect in bio-based lubricant using high-frequency reciprocating rig. Jurnal Tribologi, 30 . pp. 44-60. ISSN 2289-7232

Opia, Anthony Chukwunonso and Mohd. Kameil, Abdul Hamid and Syahrullail, Samion and Mamah, Stanley Chinedu and Izmi, Mazali Izhari and Zul Hilmi, Che Daud and Saleh, Abdelgade Agilah and Abd. Rahim, Abu Bakar and Johnson, Charles A. N. (2021) Effect of concentration on the tribological behavior of cyclic heated formulated organic carbon nanotubes in base lubricant under boundary conditions. Tribology Online, 16 (4). pp. 199-209. ISSN 1881-218X

Othman, Nur Afiqah and Nayan, Nafarizal and Mustafa, Mohd. Kamarulzaki and Azman, Zulkifli and Megat Hasnan, Megat Muhammad Ikhsan and Bakri, Anis Suhaili and Jaffar, Siti Noryasmin and Abu Bakar, Ahmad Shuhaimi and Mamat, Mohd. Hafiz and Mohd. Yusop, Mohd. Zamri and Ahmad, Mohd. Yazid (2021) Structural and morphological properties of AlGaN thin films prepared by co-sputtering technique. In: 13th IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2021, 2 - 4 August 2021, Virtual, Kuala Lumpur.

Othman, Nurain and Ishak, Iskandar Shah and Dahalan, M. D. Nizam (2021) Static analysis of unsteady aerodynamics wake of simplified helicopter model via simulation work. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 89 (1). pp. 142-153. ISSN 2289-7879

Paiman, Zulhanafi (2021) Tribological performances of journal bearing using palm oil based lubricant. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Radhwan, H. and Sharif, S. and Shayfull, Z. and Suhaimi, M. A. and l-hadj, Abdellah and Khushairi, M. T. M. (2021) Thermal-transient analysis for cooling time on new formulation of Metal Epoxy Composite (MEC) as mold inserts. Arabian Journal for Science and Engineering, 46 (8). pp. 7483-7494. ISSN 2193-567X

Rahim, Muhammad Roslan and Mohd. Jaafar, Mohammad Nazri and M. Shaiful, A. I. and Wan Omar, Wan Zaidi and Othman, Norazila (2021) Utilizing of biodiesel fuel for micro gas turbine combustion performance. In: 6th International Conference on Green Design and Manufacture 2020, IConGDM 2020, 23 July 2020 - 24 July 2020, Arau, Perlis, Malaysia.

Rahman, M. N. and Abdul Wahid, M. (2021) Renewable-based zero-carbon fuels for the use of power generation: a case study in Malaysia supported by updated developments worldwide. Energy Reports, 7 (NA). pp. 1986-2020. ISSN 2352-4847

Rahman, Mohammad Nurizat and Abdul Wahid, Mazlan and Mohd. Yasin, Mohd. Fairus and Abidin, Ummikalsom and Mazlan, Muhammad Amri (2021) Predictive numerical analysis on the mixing characteristics in a rotating detonation engine (RDE). Evergreen, 8 (1). pp. 123-130. ISSN 2189-0420

Ramasamy, Murugan and Abdul Hannan, Mohammed and Ahmed, Yaseen Adnan and Kr Dev, Arun (2021) ANN-based decision making in station keeping for geotechnical drilling vessel. Journal of Marine Science and Engineering, 9 (6). p. 596. ISSN 2077-1312

Rasep, Z. and Muhammad Yazid, M. N. A. W. and Samion, S. (2021) Lubrication of textured journal bearing by using vegetable oil: a review of approaches, challenges, and opportunities. Renewable and Sustainable Energy Reviews, 146 . ISSN 1364-0321

Rasep, Z. and Yazid, M. N. A. W. M. and Samion, S. (2021) A study of cavitation effect in a journal bearing using CFD: a case study of engine oil, palm oil and water. Jurnal Tribologi, 28 . pp. 48-62. ISSN 2289-7232

Razali, Mohammad Rashidi (2021) Modified gaussian puff method for prediction of CO2 emission from ship. PhD thesis, Universiti Teknologi Malaysia.

Rian Puji Kusuma, Rian Puji Kusuma and Dwi Agustina Kurniawati, Dwi Agustina Kurniawati and Dwi Kristanto, Dwi Kristanto and Mohd. Yusof, Noordin and Kuan, Yew Wong (2021) Optimizing distribution route of packed drinking water with the Clarke and Wright savings and nearest neighbor methods (case study of pt. GSI). Journal of Industrial Engineering and Halal Industries (JIEHIS), 2 (2). pp. 77-84. ISSN 2722-8150

Roslan, Muhammad Nazmi Hadi and Zolpakar, Nor Atiqah and Mohd. Ghazali, Normah and Mohd. Saat, Fatimah Al-Zahrah (2021) Analysis of 3D printed stack in thermoacoustic cooling. Evergreen, 8 (1). pp. 131-137. ISSN 2189-0420

Sabzehmeidani, Yaser and Mailah, Musa and Tang, H. Hing and Abdelmaksoud, Sherif I. (2021) A novel voice-coil actuated mini crawler for in-pipe application employing active force control with iterative learning algorithm. IEEE Access, 9 (NA). pp. 28156-28166. ISSN 2169-3536

Sadiq, I. O. and Suhaimi, M. A. and Sharif, S. and Mohd. Yusof, N. and Park, K. H. and Abd. Rahim, S. Z. and Alias, N. (2021) Performance evaluation of nano-enhanced coconut oil as sustainable lubricant. In: 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020, 26 November 2020 - 27 November 2020, Langkawi, Kedah.

Said, Mazuriah (2021) Experimental analysis on the inner vortices interaction above diamond wing model in low speed aerodynamics. PhD thesis, Universiti Teknologi Malaysia.

Sakataven, Raja Surian and Helmi, Syed Ahmad and Hisjam, Muhammad (2021) Lean implementation barriers and their contextual relationship in contract manufacturing machining company. Evergreen, 8 (2). pp. 499-508. ISSN 2189-0420

Salim, Mohd. Azli and Md. Saad, Adzni and Photong, Chonlatee and Md. Zain, Mohd. Zarhamdy and Abu Bakar, Abd. Rahim and Mohd. Yusof, Norbazlan and Akop, Mohd. Zaid (2021) Modelling and estimation on vibration and noise level of the dynamic wiper system using input shaping strategy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 311-332. ISSN 1985-5761

Samuel, Moveh (2021) Lane keeping control algorithm using image processing. PhD thesis, Universiti Teknologi Malaysia.

Samuel, Moveh and Mohamad, Maziah and Mohamed Hussein, Mohamed Hussein and Mad Saad, Shaharil (2021) Lane keeping maneuvers using proportional integral derivative (PID) and model predictive control (MPC). Journal of Robotics and Control (JRC), 2 (2). pp. 78-82. ISSN 2715-5056

Sari, E. and Ma'aram, A. and Shaharoun, A. M. and Chofreh, A. G. and Goni, F. A. and Klemeš, J. J. and Marie, I. A. and Saraswati, D. (2021) Measuring sustainable cleaner maintenance hierarchical contributions of the car manufacturing industry. Journal of Cleaner Production, 312 . ISSN 0959-6526

Saufi, S. R. and Ahmad, Z. A. B. and Leong, M. S. and Hee, L. M. (2021) Bearing fault diagnosis using deep sparse autoencoder. In: 1st International Colloquium on Computational and Experimental Mechanics, ICCEM 2020, 25 - 26 June 2020, Selangor, Malaysia.

Saufi, S. R. and Hasan, M. D. A. and Ahmad, Z. A. and Leong, M. S. and Lim, M. H. (2021) Detection of covid-19 from chest x-ray and ct scan images using improved stacked sparse autoencoder. Pertanika Journal of Science and Technology, 29 (3). ISSN 0128-7680

Saufi, Syahril Ramadhan and Ab. Talib, Mat Hussin and Ahmad, Zair Asrar and Lim, Meng Hee and Leong, Mohd. Salman and Md. Idris, Mohd. Haffizzi (2021) Comparative analysis of optimization algorithm on DSAE model for bearing fault diagnosis. In: 2021 IEEE International Conference on Sensors and Nanotechnology, SENNANO 2021, 22 - 24 September 2021, Virtual, Online.

Shadan, Mohamad Azizi and Mohd. Nor, Nur Safwati and Md. Zain, Mohd. Zarhamdy and Mohd. Zawawi, Fazila and Ngadiman, Nor Hasrul Akhmal and Sazali, Norazlianie and Fadil, Nor Akmal (2021) Seawater as new renewable energy resource: Material characterization of the cell electrodes. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020, Pekan, Pahang.

Shahrin, Muhammad Shahrul Nizam and Othman, Norazila and Nik Mohd., Nik Ahmad Ridhwan and Ab. Wahid, Mastura and Md. Zain, Mohd. Zarhamdy (2021) Porosity effect of the silver catalyst in hydrogen peroxide monopropellant thruster. CFD Letters, 13 (12). pp. 1-20. ISSN 2180-1363

Shahrin, Muhammad Shahrul Nizam and Othman, Norazila and Nik Mohd., Nik Ahmad Ridhwan and Abd. Wahid, Mastura (2021) Numerical analysis of hydrogen peroxide monopropellant thruster. International Journal of Sustainable Aviation, 7 (3). pp. 249-263. ISSN 2050-0467

Shahrin, Muhammad Shahrul Nizam and Othman, Norazila and Nik Mohd., Nik Ahmad Ridhwan and Abd. Wahid, Mastura (2021) Numerical analysis of hydrogen peroxide monopropellant thruster. International Journal of Sustainable Aviation, 7 (3). pp. 249-263. ISSN 2050-0467

Shamjuddin, A. and Ab. Rasid, N. S. and Raissa, M. M. M. and Zarin, M. A. A. and Wan Omar, W. N. N. and Syahrom, A. and Januddi, M. A. F. M. S. and Saidina Amin, N. A. S. (2021) Kinetic and dynamic analysis of ozonolysis pre-treatment of empty fruit bunch in a well-mixed reactor for sugar production. Energy Conversion and Management, 244 . ISSN 0196-8904

Shamsuddin, H. S. and Abidin, U. and Zaidan, H. A. and Ghazali, N. M. (2021) Effect of wall resistance on the total thermal resistance of a stacked microchannel heat sink. Evergreen, 8 (1). ISSN 2189-0420

Shamsuddin, H. S. and Estellé, P. and Navas, J. and Mohd. Ghazali, N. and Mohamad, M. (2021) Effects of surfactant and nanofluid on the performance and optimization of a microchannel heat sink. International Journal of Heat and Mass Transfer, 175 . ISSN 0017-9310

Shamsuddin, H. S. and Lee, W. T. and Mohd. Ghazali, N. and Estellé, P. and Maré, T. and Mohamad, M. (2021) Nanofluid-cooled microchannel heat sink with carbon nanotube. Evergreen, 8 (1). pp. 170-176. ISSN 2189-0420

Shudin, Nasrat Hannah and Mukri, Mohd. ’Azizir Rahim and Aziz, Madzlan and Othman, Mohd. Hafiz Dzarfan and Tanemura, Masaki and Mohd. Yusop, Mohd. Zamri (2021) The role of solid, liquid and gaseous hydrocarbon precursors on chemical vapor deposition grown carbon nanomaterials’ growth temperature. Synthetic Metals, 274 . ISSN 0379-6779

Siow, Chee Loon and Kang, Hooi Siang and Abd. Kader, Ab Saman and Wong, Jing Heng and Harun, Muhamad Noor and J., Koto and Abdul Hamid, Mohd. Foad and Nusyirwan, Istas Fahrurrazi and Jonathan, Yong Chung Ee (2021) Prediction of ship collision risk on Singapore strait using AIS data. Journal Of Transport System Engineering, 8 (2). pp. 21-28. ISSN 2289–9790

Suarin, M. A. and Latif, M. J. A. and Zakaria, M. S. and Harun, M. N. and Nguyen, H. Q. (2021) Effects of total disc replacement on range of motion and facet stress in lumbar spine using a finite element analysis. International Journal of Nanoelectronics and Materials, 14 (ISST). pp. 263-274. ISSN 1985-5761

Suhardi, Bambang and Ishartomo, Farid and Mohd. Rohani, Jafri (2021) Prohibitory traffic signs by well educated young drivers based on situations scenarios. Cogent Engineering, 8 (1). pp. 1-17. ISSN 2331-1916

Sukri, Aiman Azrael Shaiful Nahar and Nazri, Siti Sarah Zahidah and Hadi, Muhamad Sukri and Jamali, Annisa and Mohd. Yatim, Hanim and Mat Darus, Intan Zaurah (2021) Hub angle control for a single link flexible manipulator based on cuckoo search algorithm. In: 7th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2021, 23 August 2021 - 25 August 2021, Virtual, Bandung.

Suprayogi, Dedy Triawan and Yaakob, Omar and M.Ahmed, Yasser and Hashim, Farah Ellyza and Prayetno, Eko and Elbatran, A. H. Abdelbaky and Purqon, Acep (2021) Speed limit determination of fishing boats in confined water based on ship generated waves. Alexandria Engineering Journal, 61 (4). pp. 3165-3174. ISSN 1110-0168

Syed Abdullah, S. I. B. and Iannucci, L. and Greenhalgh, E. S. and Ahmad, Z. (2021) The impact performance of Vectran/Epoxy composite laminates with a novel non-crimp fabric architecture. Composite Structures, 265 . p. 113784. ISSN 0263-8223

Taghavi, Erfan and Fallahpour, Alireza and Wong, Kuan Yew and Hoseini, Seyed Amirali (2021) Identifying and prioritizing the effective factors in the implementation of green supply chain management in the construction industry. Sustainable Operations and Computers, 2 (NA). pp. 97-106. ISSN 2666-4127

Tamtomo, B. T. and Kurniawati, D. A. and Yusof, N. M. and Wong, K. Y. (2021) Job shop scheduling using shifting bottleneck heuristic algorithm. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 March 2021 - 11 March 2021, Virtual, Online.

Tan, Beng Chiat (2021) Spray angle and droplet size analysis for gas turbine fogging. PhD thesis, Universiti Teknologi Malaysia, Faculty of Engineering - School of Mechanical Engineering.

Tan, K. W. and Mohd. Nor, N. S. and Teoh, W. K. and Fadil, N. A. and Mat Darus, I. Z. and Mohd. Yamin, A. H. and Mohd Zawawi, F. (2021) Evaluation of the convolutional neural network’s performance in classifying steel strip’s surface defects. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2020, 6 August 2020 - 6 August 2020, Gambang.

Tanji, Ayoub and Gapsari, Femiana and Syahrom, Ardiyansyah and Idris, Mohd. Hasbullah and Hermawan, Hendra (2021) Effect of Mo addition on the pitting resistance of TiMn alloys in Hanks’ solution. Journal of Alloys and Compounds, 871 . p. 159582. ISSN 0925-8388

Thangaraju, Savithry K. and Rajoo, Srithar and Munisamy, Kannan M. (2021) Numerical analysis of oil cooled PMSM jacket with horizontal strips design. In: 4th Asia Conference on Energy and Electrical Engineering, ACEEE 2021, 10 September 2021 - 12 September 2021, Bangkok, Virtual.

Toh, H. T. and Hassan, Adnan (2021) Quality improvement in a multi-cavity injection moulding process using response surface methodology. In: 2nd International Conference on Experimental and Computational Mechanics in Engineering, ICECME 2020, 13 October 2020 - 14 October 2020, Banda Aceh, Indonesia.

Toh, H. T. and Hassan, Adnan (2021) Quality improvement of plastic injection molded product using doe and taguchi techniques. In: 2nd International Conference on Experimental and Computational Mechanics in Engineering, ICECME 2020, 13 - 14 October 2020, Banda Aceh, Indonesia.

Veza, I. and Muhammad, V. and Oktavian, R. and Djamari, D. W. and Said, M. F. M. (2021) Effect of COVID-19 on biodiesel industry: A case study in Indonesia and Malaysia. International Journal of Automotive and Mechanical Engineering, 18 (2). pp. 8637-8646. ISSN 2229-8649

Veza, Ibham and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain (2021) Recent advances in butanol production by acetone-butanol-ethanol (ABE) fermentation. Biomass and Bioenergy, 144 (NA). pp. 1-19. ISSN 0961-9534

Veza, Ibham and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain and Abas, Mohd. Azman (2021) Application of Elman and Cascade neural network (ENN and CNN) in comparison with adaptive neuro fuzzy inference system (ANFIS) to predict key fuel properties of ABE-diesel blends. International Journal of Green Energy, 18 (14). pp. 1510-1522. ISSN 1543-5075

Veza, Ibham and Roslan, Muhammad Faizullizam and Muhamad Said, Mohd. Farid and Abdul Latiff, Zulkarnain and Abas, Mohd. Azman (2021) Physico-chemical properties of Acetone-Butanol-Ethanol (ABE)-diesel blends: Blending strategies and mathematical correlations. Fuel, 286 . p. 119467. ISSN 0016-2361

Wee, Ying Ci (2021) Alloying and aging treatment effect on the shape memory and damping properties of Cu-13Al-4Ni alloys. PhD thesis, Universiti Teknologi Malaysia.

Wong, Dominick and Anwar, Mahmood and Debnath, Sujan and Abdul Hamid, Abdul Hamid and Izman, S. (2021) A review: Recent development of natural fiber-reinforced polymer nanocomposites. JOM, 73 (8). pp. 2504-2515. ISSN 1047-4838

Wong, Dominick and Anwar, Mahmood and Debnath, Sujan and Abdul Hamid, Abdul Hamid and Izman, Sudin and Pramanik, Alokesh (2021) Degassing process influence on tensile strength of Neat E132 epoxy polymeric materials. In: Spring International Conference on Material Sciences and Technology, MST-S 2021, 20 - 22 April 2021, Xi’an, China.

Y., Aiman and Firdaus, M. and Musa, M. N. and Samion, Syahrullail (2021) The effectiveness of jet impingement cooling system on various flat plate surface. Evergreen, 8 (1). pp. 187-192. ISSN 2189-0420

Y., Aiman and Samion, Syahrullail and Hafishah, H. and Musa, M. N. (2021) Friction characteristic study on flat surface embedded with micro pit. Evergreen, 8 (2). pp. 304-309. ISSN 2189-0420

Yahaya, Aiman and Samion, Syahrullail and Mohd. Ahyan, Nurul Aini and Abdul Hamid, Mohd. Kameil (2021) Cold extrusion using biodegradable oil as lubricant: experimental and simulation analysis. Jurnal Tribologi, 30 . pp. 116-132. ISSN 2289-7232

Yong, Pooi Chee and Dullah, Salinah and Amaludin, Adriana Erica and Ghazali, Habibah and Asrah, Hidayati and Matlan, Siti Jahara (2021) Potential application of extensive green roofs in bus stops - Malaysia. In: 6th International Conference on Green Design and Manufacture 2020, IConGDM 2020, 23 - 24 July 2020, Arau, Perlis.

Yusop, A. H. M. and Alsakkaf, A. and Kadir, M. R. A. and Sukmana, I. (2021) Corrosion of porous Mg and Fe scaffolds: a review of mechanical and biocompatibility responses. Corrosion Engineering Science and Technology, 56 (4). pp. 310-326. ISSN 1478-422X

Zainal, M. T. and Mohd. Yasin, M. F. and Abdul Wahid, M. and Mohd. Sies, M. (2021) A flame structure approach for controlling carbon nanotube growth in flame synthesis. Combustion Science and Technology, 193 (8). pp. 1326-1342. ISSN 0010-2202

Zainal Abidin, Mohd. Taufiq and Abdul Rahman, S. M. B. and Nursyirwan, Istas Fahrurrazi and Mustafa, Amiruddin (2021) Analysis and visualization of KLIA flight departure delay pattern. Journal of Aeronautics, Astronautics and Aviation, 53 (2). pp. 105-111. ISSN 1990-7710

Zainal Abidin, Shaiful Fadzil and Khalid, Amir and Zanalli, Sophia and Zahari, Izzarief and Abdul Jalal, Rifqi Irzuan and Abas, Mohd. Azman and Koten, Hasan (2021) The effect of 48V mild hybrid technology on fuel consumption of a passenger car by using simulation cycle. Case Studies in Thermal Engineering, 28 . pp. 1-10. ISSN 2214-157X

Zainol, Zaina Norhallis (2021) Heat transfer model to predict skin burn injury for firefighters. PhD thesis, Universiti Teknologi Malaysia.

Zainuddin, N. and Sharif, S. and Suhaimi, M. A. and Mohruni, A. S. and Yanis, M. and Mad Saad, S. and Mohd. Saad, R. and Abd. Rahim, S. Z. and Yasak, R. (2021) Performance evaluation of coolant concentration when end milling hardened steel using coated carbide tool. In: 8th International Conference on Advanced Material Engineering and Technology, ICAMET 2020, 26 November 2020 - 27 November 2020, Langkawi, Kedah.

Zaman, Munawar and Hassan, Adnan (2021) Fuzzy heuristics and decision tree for classification of statistical feature-based control chart patterns. Symmetry, 13 (1). pp. 1-12. ISSN 2073-8994

Zaman, Munawar and Hassan, Adnan (2021) X-bar control chart patterns identification using Nelson’s run rules. In: 11th Annual International Conference on Industrial Engineering and Operations Management, IEOM 2021, 7 March 2021 - 11 March 2021, Virtual, Online.