Items where Division is "Civil Engineering" and Year is 2012

A

A. Ahmed, Zakria (2012) Hybrid particle swarm optimization and black stork foraging for functional neural fuzzy network learning enhancement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Rahman, Aida (2012) The roles of reading and group discussion as pre-tasks in impromptu speech on facts. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Razak, Affiz Syam (2012) Preloading and prefabricated vertical drain technique for soft ground improvement in soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

A. Roslan, Firra (2012) Interpretation of ultimate pile capacity based on Maintain Load Test (MLT). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd Rashid, Rafhana (2012) Threat profiling based on vulnerability assessment and penetration testing: iphone case study. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd Samat, Roslida (2012) Infrastructure component assessment using the condition index system: literature review and discussion. KICEM Journal of Construction Engineering and Project Management, 2 (1). pp. 27-34. ISSN 2233-9582

Abd. Khalid, Nur Hafizah (2012) Characterizations of kenaf fiber reinforced polymer composites for structural elements. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Majid, Muhd. Zaimi and Lamit, Hasannudin and Keyvanfar, Ali and Shafaghat, Arezou (2012) A proposal for prototype package of green affordable home: using fast track wall system. International Journal of Sustainable Development, 3 (12). pp. 107-116. ISSN 1923-6654

Abd. Majid, Muhd. Zaimi and Zakaria, Wan Zahran and Keyvanfar, Ali (2012) Executive information site management system for monitoring project performance: system requirement study. International Journal of Sustainable Development, 3 (3). pp. 11-24. ISSN 1923-6654

Abd. Rahim, Rafidah (2012) Teknik kluster dwi-peringkat untuk penambahbaikan graf gerak dalam pensintesisan pergerakan manusia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Rashid, Nor Suhada (2012) Determining near saturated soil hydraulic properties at oil palm plantation using wooding equation and inverse solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Shattar, Normurniyati (2012) Predicting refinery energy losses due to fouling in heat exchangers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abd. Wahab @ Dul Ahad, Norhayati (2012) Simulation of slope stability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Awal, A. S. M. and Hossain, M. Bellal (2012) Mechanical properties and durability of some selected timber species. Malaysian Journal of Civil Engineering, 24 (1). pp. 67-84. ISSN 1823-7843

Abdul Aziz, Noor Azeera (2012) Embedding corporate social responsibility in information security management system as human factor solution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Aziz, Zuraidah (2012) Comparing conventional to industrialised building system construction costing : a case study of school building projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Mohamad Sofiuddin (2012) Pengawalan kos projek pembinaan oleh kontraktor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Rahman, Siti Fatimah (2012) Development of embedded capacitive sensor for monitoring corrosion of reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdul Shukor Lim, Nor Hasanah (2012) Workability and strength properties of geopolymer mortars prepared from agro-industrial waste. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

AbdulAziz Ali Asaad, AbdulWahab (2012) Industrialized building system survey in Yemen. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulkadir, Mohamed Hagi (2012) Security awareness framework of mobile phones from user's perspective. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdulkadir, Said Jadid (2012) Three-term back propagation neural network for moisture prediction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Athira (2012) The practices of corporate social responsibility among construction companies in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah, Redzuan and Mokhatar, Shahrul Niza (2012) Computational analysis of reinforced concrete slabs subjected to impact loads. International Journal of Integrated Engineering, 4 (2). pp. 70-76. ISSN 2229-838X

Abdullah Arshah, Ruzaini (2012) Assessment instrument for integrated information system success in institutions of higher learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abdullah Mohammed Yayah, Abdulsalam (2012) Improving and-to-end delay of optical burst switching networks through enchanced burst-assembly and offset-time scheme. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abg. Hasbollah, Dayang Zulaika (2012) Influence of moisture content on the strength index of shale and sandstone. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abu, Mohd. Yazid (2012) Performance evaluation of wire electro discharge machining on silicon carbide. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Abubakar, Sani Balarabbe (2012) The elements identification of green highways in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Adzar, Jeffryl Azniel (2012) Issues and challenges of class F contractors and improvement strategies to survive in Malaysia construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Azmiyantie (2012) Quality improvement of electroless nickel process used in hard disc industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Izwan Shah (2012) Limit equilibrium method and finite element method in slope stability analysis. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmad, Nor Farah Atiqah (2012) Field evaluation of infiltration models under oil palm plantation with reference to stemflow & througfall areas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmadi, Mohammad (2012) Interaction between diaphragm and shear wall for instability resistance of structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ahmed, Kamal (2012) Subjective and objective weighting methods in multiple criteria decision making used in water resources. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ainee, Farinee (2012) Energy consumption and potential retrofitting of highway rest and service areas (RSAs). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alhabieb, Omar Haitham (2012) Variable offset time for composite burst assembly with segmentation scheme in optical burst switching networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Bayan Anwer (2012) Structural performance of cold-formed steel frame with bolted moment connections. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Rizwan (2012) Application of prevention through design concept into design process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali, Siti Norbaizura (2012) The reliability of ‘development length test and ultimate load test’ on prestress concrete sleepers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Ahmed, Abdul Rahman (2012) Mobile anchor point selection in hybrid mobility management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Ahmed, Waleed (2012) Intelligent web proxy caching based on supervised machine learning. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Akbar, Nor Asma (2012) Feasibility study on Palm Oil Fuel Ash (POFA) as bitumen modifier. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ali Al-Rahmi, Waleed Mugahed (2012) Evaluating student's satisfaction of e-learning in UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Alkhail Balubaid, Saeed Omer Ahmed (2012) Energy efficiency of toll plaza. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amani, Nima and Mohamed Ali, Nasly and Mohammed, Abdul Hakim and Abd Samat, Roslida (2012) A survey on the implementation of facilities maintenance management system of building in Iran. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 85-95. ISSN 1823-7843

Amirazar, Armin (2012) Cost benefit of lighting retrofit on existing building towards energy efficient building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Amiri, Shin To (2012) The effect of chemicals on permeability and shear strength characteristics of soils. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Andalib, Ramin (2012) Structural performance of palm oil fuel ash-fly ash geopolymer concrete beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Anuar, Aznah Nor and Chelliapan, Shreeshivadasan and Sulaiman, S. and Abd. Razak, A.S. (2012) A study of using allium cepa (onion) as natural corrosion inhibitor in industrial chill wastewater system. Research Journal of Chemical Sciences, 2 (5). pp. 10-16. ISSN 2231-606X

Arjo, Roslaily @ Mohamad Khairi (2012) Strategies for improvement of upstream oil and gas facilities fabricator planning and scheduling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Armaghani, Danial Jahed (2012) Prediction of flyrock in boulder blasting by using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Arumuqaun, Vijayaletchumy and Ayyayoo, Devaki and Alaulddin, Mohammed and Sageh, Azizah (2012) Attraction and exclusion – loneliness (introduction). [Teaching Resource] (Unpublished)

Arumuqaun, Vijayaletchumy and Ayyayoo, Devaki and Alaulddin, Mohammed and Sageh, Azizah (2012) Attraction and exclusion – what is attractive? [Teaching Resource] (Unpublished)

Asipita, Salawu Abdulrahman (2012) Performance of Bambusa Arundinacea as green inhibitor for corrosion of steel reinforcement in concrete. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Asnawi, Syalwati (2012) Performance of controlled release-formulated mosquito repellent based on geranium oil-loaded solid lipid particles (SLP). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Awang, Ahmad Fauzi (2012) Establishment of a work programme model for contractor. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Azman, Shamila and Chan, Benedict Wei Chiang and Ismail, Razali and Jaafar, Jafariah and Mohd. Said, Mohd. Ismid and Salmiati, Salmiati (2012) Effect of land use on coastal water and perna viridis at Johor Straits, Malaysia. International Journal of Environmental Science and Development, 3 (3). pp. 237-239. ISSN 2010-0264

B

Baharin, Noor Hamizah (2012) Self assessment green building index for residential estates. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bakti, Erman Surya (2012) Constructability database knowledge model and guidelines of industrial plant at construction stage. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baniahmadi, Mahmoud (2012) Evaluation of shear resistance in reinforced concrete beams with fiber reinforced polymer and steel reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Banihashemi Namini, Seyed Saeed (2012) An integration of industrialised building system with building information modelling to improve construction industry productivity. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Baradaran Rohani, Mahsa (2012) Developing a framework for deploying web 2.0 in UTM e-learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bari Razib, Hasibul (2012) Evaluation of upgradable transitional shelter desings in tropical climate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bavafa, Ali Asghar (2012) Evaluation of construction time performance and waste time reduction by utilizing lean paradigm. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Behboodian, Navid (2012) ARP poisoning detection and protection using client's ARP table monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Behnia, Arash (2012) Finite element analysis of high modal dynamic responses of composite floor due to human motion induction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bejarbaneh, Behnam Yazdani (2012) Shear strength parameters of shale based on triaxial compression test. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ben-Edigbe, Johnnie and Abdelgalil, Ahmed and Abbaszadehfallah, Iman (2012) Extent of delay and level of service at signalised roundabout. International Journal of Engineering and Technology, 2 (3). pp. 419-424. ISSN 2049-3444

Ben-Edigbe, Johnnie and Mashros, Nordiana (2012) Extent of highway capacity loss resulting from road humps. International Journal of Engineering and Technology, 4 (2). pp. 121-125. ISSN 1793-8244

Besrour, Souhaib (2012) Measuring security practices in requirements engineering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Borghei, Amir Hossein (2012) Executive dashboard reports for public sector clients in construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Bozorgi Rad, Seyed Yaser (2012) Enhancing genetic algorithms based solutions for multi source flexible multistage logistics network models. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

C

Chalid, Abdul (2012) Performance of epoxy putty-FRP for underwater structural concrete. International Journal of Civil, Structural, Environmental and Infrastructure Engineering, 2 (4). pp. 33-44. ISSN 2249-7978

Che Ajid, Nur Hizaruddin (2012) Effect of aggregate moisture on adhesion of chip seal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Che Ali, Anuar (2012) Risk management for superior project performance in Petronas. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chelliapan, Shreeshivadasan and M. D., Mohd. Fadhil and S., Rafidah (2012) Assessment on the permittance of noise impact levels from the expansion of Batu Berendam Airport, Malacca, Malaysia. International Journal of Environmental Sciences, 2 (3). pp. 1470-1483. ISSN 0976-4402 (Electronic)

Chelliapan, Shreeshivadasan and Md. Din, Mohd. Fadhil and Othman, N. and Mahat, Siti Baizura and Yuzir, A. (2012) Anaerobic digestion of paper mill wastewater. Iranica Journal of Energy & Environment, 3 (2). pp. 85-90. ISSN 2079-2115 (Print) ; 2079-2123 (Electronic)

Chew, Choy San (2012) Achieving collaborative working environment using design and build platform. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chew, Siow Jin (2012) Prediction of shaft resistance of bored pile in limestone formation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chizari, Hassan (2012) Delaunay triangulation-based global and local coverage measurement for wireless sensor networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Chong, Yee Horng (2012) Finite element analysis of corbel to beam connection under static load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

D

Dahalan, Nurol Huda (2012) Highway asset management system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dan'azumi, Salisu (2012) Analytical probabilistic model and particle swarm optimization for urban stormwater detention pond design. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dehghan Najmabadi, Alireza (2012) Strength properties of fly ash based geopolymer concrete containing bottom ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Deria Liban, Abdilahi (2012) Inference binary search algorithm for blind timing-based attack in MYSQL injector vulnerability checker tool. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Dzinun, Hazlini (2012) Thermal behaviours of exterior wall of buildings. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

E

Elageb Adaam, Alaadein Abdusalam (2012) Feasibility study on the implementation of medium rise industrialized building system (IBS) in Aleskan Alshaabi project in Khartoum. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Eng, Boon Cheng (2012) Joint orientation measurement using close range photogrammetry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Evans, Ordiah Vans (2012) Evaluation of factors affecting the deformation behaviour of braced excavation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

F

Faheem, Muhammad (2012) Enhancement of energy efficient cluster based data gathering protocol for wireless sensor networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Faiza, Bukenya (2012) Detecting floods using an object based change detection approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fathi, Mohamad Syazli and Abedi, Mohammad and Rambat, Shuib and Rawai, Shakila and Zakiyudin, Mohd. Zulakhmar (2012) Context-aware cloud computing for construction collaboration. Journal of Cloud Computing, 2012 . pp. 1-11. ISSN 2330-7889

Firoozabadi, Samira Fotoohi (2012) Knowledge audit for Phd information system at Faculty of Computer Science and Information system of UTM. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Foroozesh, Behnaz (2012) Security features identification for CISCO routers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Fulazzaky, Mohamad Ali and Ali, Nurdin and Samekto, Haryanti and Ghazali, Mohd. Imran (2012) Assessment of CpTi surface properties after nitrogen ion implantation with various dose and energy. Metallurgical and Materials Transactions A, 43A (11). pp. 4185-4193. ISSN 1543-1940 (Electronic) ; 1073-5623 (Print)

G

Gerami, Parisa (2012) Least significant bit image steganography using particle swarm optimization and optical pixel adjustment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghadim, Hamed Benisi (2012) Simulation of future climate variations using global circulation model and downscaling model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gharib Khidhir, Halmat (2012) Indicative tests for cracked asphalt pavement sealant performance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghasemabadi, Reza Lak (2012) Cost comparison between IBS and conventional methods of construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghobakhlou, Ida (2012) Effects of gradient on speed of vehicles on an Iranian single carriageway road. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ghorashi, Seyed Hamid (2012) Frequent pattern algorithms for product feature extraction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Gordan, Behrouz and Adnan, Azlan (2012) Effect of material property in foundation during earthquake on the embankment. ISRN Civil Engineering, 2012 . pp. 1-6. ISSN 2090-5114

H

Hainin, Mohd. Rosli (2012) Physical properties and storage stability of asphalt binder modified with nanoclay and warm asphalt additives. World Journal of Engineering, 9 (2). pp. 155-160. ISSN 1708-5284

Hamdan, Hazrin (2012) Minimizing variation order on construction project due to design change. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hamid, Mohd. Naim (2012) Requirement of value management in construction sector at Malaysian Airports Holdings Berhad (MAHB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hammood, Oday Hamzah (2012) Punching shear resistance of flat slab with various types of shear reinforcement. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hares Wady, Shakhawan (2012) Enhancement of mobile IPV6 for handover latency using robust regression model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Harman, Zulhilmi (2012) Effectiveness of monorail transportation in Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Haron, Zaiton (2012) Noise produced by transverse rumble strips: a case study on rural roadways. Journal of Mechanical and Civil Engineering, 1 (5). pp. 12-16. ISSN 2278-1684

Haron, Zaiton and Mohd. Noh, Hamidun and Yahya, Khairulzan and Omar, Wahid and Abd Majid, Zaimi (2012) Assessing noise emission levels from earthwork construction equipment. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 13-28. ISSN 1823-7843

Harun, Sobri (2012) Modeling daily stream flow using plant evapotranspiration method. International Journal of Water Resources and Environmental Engineering, 4 (4). pp. 218-226. ISSN 1991-637X

Harun, Sobri and Hassan, Zulkarnain and Abdul Malek, Marlinda (2012) Application of ANNs model with the SDSM for the hydrological trend prediction in the sub-catchment of Kurau River, Malaysia. Journal of Environmental Science and Engineering: B, 1B (6). pp. 577-585. ISSN 1934-8932

Harun, Sobri and Jajarmizadeh, Milad and Salarpour, Mohsen (2012) A review on theoretical consideration and types of models in hydrology. Journal of Environmental Science and Technology, 5 (5). pp. 249-261. ISSN 1994-7887

Harun, Sobri and Tukimat, Nurul Nadrah Aqilah (2012) Comparative methods in measuring the irrigation water needs at muda irrigation scheme, Kedah. Ultra Engineers, 1 (1). pp. 29-33. ISSN 2319-7161 (Print)

Haryati Amzah, Nurrul Hudha (2012) The challenges in implementing incentive based contract in Jabatan Kerja Raya project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hashemi, Hamid Reza Khoshnoud (2012) Corner openings in masonry wall for infilled reinforced concrete frames as a seismic retrofitting strategy. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Zainudin (2012) Perubahan sosial dan pembangunan modal insan berkualiti dalam kalangan mahasiswa Institusi Pengajian Tinggi Awam. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Zulkarnain (2012) Climate change impact on precipitation and streamflow in a humid tropical watershed. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan, Zulkarnain and Harun, Sobri (2012) Application of statistical downscaling model for long lead rainfall prediction in Kurau River catchment of Malaysia. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 1-12. ISSN 1823-7843

Hassan Abdi, Abdirashid (2012) Client server application for server farm performance monitoring. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassan Shuaibu, Abdulrahman (2012) Determining the impact of volume to capacity ratio on travel time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hassanabadi, Mahmoud Shakouri (2012) Design optimization for energy consumption in residential buildings through building information modeling. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hatami, Somaieh (2012) Finite element analysis of fast-track wall housing system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hossein Gholizadeh, Shahaboddin (2012) An evaluation of statistical model for downscaling precipitation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hosseini, Mostafa (2012) The impact of economic recession on construction industry in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Humam, Nooraini (2012) Correlations between compression index and basic soil parameters for fine grained soils in Peninsular Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussein Jibril, Abdrahman (2012) Development of jamming method for policy enforcement in wireless campus environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Hussin, Balqis (2012) Barcode and its potential application in construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

I

Ibrahim, Abd. Jalil (2012) Time overrun in construction projects at Malaysian Palm Oil Board. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Mohd. Yunus (2012) Shear behaviour of reinforced concrete beams strengthened with carbon fibre reniforced polymer fabrics. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ishak, Nurul Arafah (2012) Lead time in construction process. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Asmah Munajah (2012) Masalah kontraktor dorman yang berdaftar di Lembaga Pembangunan Industri Pembinaan Malaysia (CIDB). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Hairu Nazlina (2012) Measuring project success. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ismail, Razali (2012) Monolayer graphene nanoribbon p-n junction. Journal of Nanoengineering and Nanomanufacturing, 2 (4). pp. 375-378. ISSN 2157-9334

Ismail, Syuhaida and Md. Yusof, Aminah and Wai, Soon Han (2012) Elements of relational contract in the delivery of public infrastructure in Malaysia. IBIMA Business Review, 2012 . pp. 1-11. ISSN 1947-3788

Ismail, Zulhilmi and Mohamad, Mohamad Ibrahim and Nekooie, Mohammad Ali (2012) Amphibious House, a Novel Practice as a Flood Mitigation Strategy in South-East Asia. Innovative Systems Design and Engineering, 3 (3). pp. 66-76. ISSN 2222-1727 (Print) ; ISSN 2222-2871 (Electronic)

J

Jaffar Sidek, Faridah and Mohd. Anuar, Norzana (2012) Wave characteristics around perforated piles in a two rows arrangement. Malaysian Journal of Civil Engineering (MJCE), 24 (1). pp. 48-66. ISSN 1823-7843

Jamadi, Muhammad Ammar (2012) Foreign labour employment in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jamaludin, Azmir (2012) Removal of free fatty acid from crude palm oil using organic solvent nanofiltration (OSN). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Jasmi, Kamarul Azmi (2012) A new approach in islamic education: mosque based teaching and learning. Journal of Islamic and Arabic Education, 4 (1). pp. 1-10. ISSN 1985-6326

Jeevaragagam, Ponselvi (2012) Neural network approach to output updating for the physically-based model of the Upper Thames River watershed. International Journal Hydrology Science And Technology (IJHST), 2 (3). pp. 306-324. ISSN 2042-7816

Johan, Muhammad Fahmi (2012) Optimization of retaining wall in deep excavation for basement work. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Johnnie, Ben-Edigbe and Ramli, Aliffa (2012) Development traffic volume reduction caused by automatic parking barrier. International Journal of Engineering and Technology, 2 (2). pp. 322-327. ISSN 2049-3444

Johnson, Olufemi Adebayo (2012) Extent of highway traffic shockwave velocity propagations by road humps. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Joohari, Mohd. Izzat (2012) Effect of dust on the adhesion of chip seal. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

K

Ka Yik, Nin (2012) The assessment of reinforced concrete solid floor slabs subjected to combined actions of vertical and lateral load. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kabir Ahmad, Farzana (2012) Inference and synergy networks for prediction of breast cancer metastasis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kabirifar, Kamyar (2012) Time measurement for improvement for construction using deming theory. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Karasi Manickam, Mangair (2012) Effectiveness of discretized data set on multilayer perceptron network with particle swarm optimization in classification problems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kasiman, Erwan Hafizi (2012) Mixed formulations for Navier Stokes equations with magnetic effect in rectangular channel. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kassim, Khairul Anuar (2012) Numerical simulation of buried pipe under wheel loads. Archives Des Sciences, 65 (5). pp. 395-401. ISSN 1661-464X

Kassim, Mohd. Azraai and Mohd. Yusof, Khairiyah and Mohammad, Shahrin (2012) Addressing the issues and challenges in ensuring quality engineering graduates using the outcome based approach (OBA): the UTM experience. ASEAN Journal in Engineering Education, 1 (1). pp. 58-64. ISSN 2231-9433

Khakdaman, Masoud (2012) Robust optimization of tactical production planning in a MTS-MTO environment under demand, process and supply uncertainties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khalik, Mohd. Zacaery (2012) Post-combustion analysis of remaining animal tissue. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khankhaje, Elnaz (2012) Improving safety condition in Tehran construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Khoshraftar, Alireza (2012) Developing the customer relationship management (crm) in health care organisation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kibirige, George William (2012) Awareness of information disclosure on social network sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kornain, Erni Fairuza (2012) Improvement of ergonomics awareness on construction sites. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Kueh, Ahmad Beng Hong (2012) Numerical computation of a two-dimensional biomagnetic channel flow. International Journal of Modern Physics: Conference Series, IJMPCS, 9 (n/a). pp. 178-192. ISSN 2010-1945

Kurnia, Aztri Yuli (2012) Extent of road lighting impact on the quality of roadway service. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

L

Lee, Kean Teong (2012) Numerical analysis of precast prestressed hollow core slab with concrete topping under shear loading. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Siaw Li (2012) Cocoa powder production process quality control using multivariate approach. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lee, Yee Khai (2012) Mechanical properties of glass fibre reinforced concrete with palm oil fuel ash. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Jason Say Kai (2012) Improving work motivation of first line managers in construction project. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Kah Seng (2012) Improving graphical password anti-shoulder surfing technique for mobile device using painting album mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Lion Yee (2012) Mechanical properties of recycled steel fibre reinforced concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lim, Yong Khin (2012) Cost control system for construction site. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Loke, Kok Foong (2012) Effect of applied load on the stability of unreinforced and reinforced slopes. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Lum, Wai Khuin (2012) Improving site management system by integrating Japanese concept of management. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

M

M. Khaleel, Dastan (2012) Comparative analysis of free flow and capacity restrained traffic assignments. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahidin, Norhidayani (2012) Human comfort using passive cooler radiator in bioclimatic house. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mahmoudian, Shaya (2012) Regenerated cellulose/montmorillonite and graphene nanocomposites via ionic liquids. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Malekian, Reza (2012) Enhanced resource reservation based on cross layer design over mobile internet protocol version 6 networks. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mamat, Azlida (2012) Herbal research e-centre (HREC) for Malaysian herbs researchers. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Man, Mustafa (2012) Model integrasi pelbagai jenis pangkalan data. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mansur, Shaiful Amri and Taherkhani, R. and Saleh, A. L. and Nekooie, Mohammad Ali and Nonshiravan, Milad and Hamdani, Majid (2012) A systematic research gap finding framework: case study of construction management. Journal of Basic And Applied Scientific Research, 2 (5). pp. 5129-5134. ISSN 2090-4304

Marsono, Abdul Kadir and Khoshnoud, Hamid Reza (2012) Assessment of FEMA356 nonlinear static procedure and modal pushover analysis for seismic evaluation of buildings. Structural Engineering and Mechanics, An International Journal, 41 (2). pp. 243-262. ISSN 1225-4568

Marto, Aminaton (2012) Morphological and strength properties of Tanjung Bin coal ash mixtures for application in civil engineering work. Int. Journal on Advanced Science, Engineering & Information Technology, 2 (2). pp. 55-62. ISSN 2088-5334

Mashros, Nordiana and Ben-Edigbe, Johnnie and Rahman, Raha (2012) Extent of highway travel time differentials resulting from rainfall intensities. British Journal of Applied Science and Technology, 2 (3). pp. 254-265. ISSN 2231-0843

Mat Salleh, Nurfazilah (2012) Effect of overheating of bitumen on hot mix asphalt properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mazlan, Dianah and Abdul Awal, A. S. M (2012) Properties of cement based composites containing oil palm stem as fiber reinforcement. Malaysian Journal of Civil Engineering (MJCE), 24 (2). pp. 107-117. ISSN 1823-7843

Mazlan, Muhammad Shahrom (2012) The construction labor shortage in Johore Bahru. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Din, Mohd. Fadhil (2012) Investigation of thermal effect on exterior wall surface of building material at urban city area. International Journal of Energy and Environment, 3 (n/a). pp. 1-12. ISSN 2076-2895

Md. Din , Mohd. Fadhil (2012) Investigation of heat impact behavior on exterior wall surface of building material at urban city area. Journal of Civil and Environmental Engineering, 2 (2). pp. 1-6. ISSN 2165-784X

Md. Said, Mohd. Ismid and Zakaria, Rozana and Vikneswaran, M. (2012) Adaptation of sustainable neighbourhood elements (SNES) in Malaysian urban neighbourhood planning. Ultra Engineer, 1 (1). pp. 7-19. ISSN 2319-7161 (Print)

Md. Sidek, Azura Sharina (2012) Development of integrated quantitative risk assessment for subsea pipelines. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Tajuddin, Rose Sabrina (2012) Ant colony and particle swarm optimization for feature selection in intrusion detection system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Md. Yusof, Aminah and Ismail, Syuhaida and Wai , Soon Han and Tey, Kim Hai (2012) A conceptual review of social infrastructure projects. Communications of the IBIMA, 2012 . ISSN 1943-7765

Md. Yusof, Aminah and Ismail, Syuhaida and Zakaria, Zarabizan (2012) Cause and impact of dispute and delay the closing of final account in malaysia construction industry. Journal of Southeast Asian Research, 2012 . pp. 1-12. ISSN 1947-3788

Md. Yusof, Aminah and Wai, Soon Han and Ismail, Syuhaida (2012) A case study approach to EPCM in light of construction project success in Malaysia. International Journal of Applied Science and Technology, 2 (5). pp. 66-73. ISSN 2221-0997

Md. Zin, Hayati (2012) Structural condition assessment of reinforced concrete jetty structure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mehrabi, Nima (2012) Effect of human motion induced vibration loading on footbridge deck. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mehrdad Ghaemi, Seyed (2012) Determine the impact of road humps on travel time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Meynagh, Mahdi Moharrami (2012) The effect of atticventilation on energy optimization in an existing green building. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mhd. Nasir, Nurul Afiza (2012) Slope stability analysis due to tree induced suction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Minouei, Amin (2012) Identifying clusters of information seeking behaviors in PSZ search engines based on url classification by using web usage mining. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Misman, Muhammad Faiz (2012) A hybrid of support vector machines and smoothly clipped absolute deviation for identification of significant genes and biological pathways. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad, Edy Tonnizam (2012) Regional geotechnical databases in Japan and their funding. USM Jurnal, n/a (n/a). n/a. ISSN n/a

Mohamad Sharif, Johan (2012) Iconic representation techniques for ion dynamics in glass structures. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamad Zin, Rosli and Heap, Yih Chong and Adnan, Hamimah (2012) A feasible means of methodological advance from delphi methods: a case study. International Journal of Academic Research, 4 (2). pp. 247-253. ISSN 2075-4124

Mohamad Zin, Rosli and Nourbakhsh, Mehdi and Zolfagharian, Samaneh and Irizarry, Javier (2012) Affordable Software for collaboration, document management, and on-site information management in small- and medium-sized construction companies. International Journal of Engineering and Technology, 4 (4). pp. 460-463. ISSN 1793-8244

Mohamed, Norhidayah (2012) The effect of aggregate temperature on HMA properties. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamed Hirei, Hassan (2012) Development of inproved wireless client authentication mechanism. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Abuallan, Mohammad Mousa (2012) Challenges in managing construction projects in Palaestine. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammad Zaki, Mohd. Faiz (2012) Effect of soil nail on slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammadyan Yasouj, Seyed Esmaeil (2012) The influence of different types and arrangements of reinforcement on capacity of concrete wide beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohammed, Bayan Omar (2012) Macro feature-based discretization for identical twin's handwriting identification. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohamud Abadalla, Saeed Mohamed (2012) Social network sites and tools framework for project based learning. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd., Thuraiya (2012) Pengaruh perancangan bandar terhadap lebihan penawaran perumahan di konurbasi Johor Bahru. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Asnawi, Noor Fairuzah (2012) Biological nutrient removal of palm oil mill effluent (POME) hybrid sequencing batch reactor (H-SBR). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Ghazalee, Nor Husna (2012) Electronic field data collection system for highway inspection maintenance. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hashim, Azli (2012) Improving project delivery performance for Department of Irrigation and Drainage Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hilal, Hasniza (2012) Analisis sambungan keluli terbentuk sejuk rasuk-tiang dan tiang-penapak menggunakan kaedah unsur terhingga. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Hosnan, Mohd. Husaini (2012) The development of wetland conservation and management plan for Sungai Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Noh, Hamidun (2012) Evaluating the appropriateness of using BS5228 for construction noise level prediction in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Said, Mohd. Ismid and Azman, Shamila and Muda, Khalida and Mohd. Kassim, Mohd. Azraai and Salmiati, Salmiati (2012) Copper in water, sediment and strombus canarium at south western coast of Peninsular Malaysia. International Journal of Environmental Science and Development, 3 (3). pp. 217-219. ISSN 2010-0264

Mohd. Samian, Mohd. Firhan (2012) Secure e-letter enterprise management framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Samiin, Abdul Azim (2012) Automated and integrated analysis and design of concrete industrialised building system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Taib @ Taib, Aizat (2012) The effect of soil-root interaction by Vertiver grass on slope stability. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yasin, Suhaila (2012) Test case generation technique for functional testing of web applications. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Yunus, Nor Zurairahetty and Wanatowski, D. and Stace, L. R. (2012) Effectiveness of chloride salts on the behaviour of lime-stabilised organic clay. International Journal of Geomate, 3 (2). pp. 407-412. ISSN 2186-2982 (Print) ; 2186-2990 (Electronic)

Mohd. Yusak, Mohd. Ibrahim (2012) Effect of long term oven aging on mechanical properties of polymer modified asphalt. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohd. Zain, Noor Hayati (2012) Fuzzy rule based and anfis classification for rainfall distribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mohmad, Munirah (2012) Aspects of analysis of simply supported bridge decks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Momeni, Ehsan (2012) Axial bearing capacity of piles and modelling of distribution of skin resistance with depth. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Motiei, Malihe (2012) Study on information security awareness among staffs. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhamad, Marshitah (2012) Performance indicators of maintenance management system for Premier Polytechnic in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad, Mohd. Khairul Idlan (2012) Time series modeling using markov and arima models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Muhammad Yuzir, Muhamad Ali and Abdullah, Norhayati and Chelliapan, Shreeshivadasan and Briers, Hannah and Sallis, Paul J. (2012) Chemical oxidation process for the treatment of antibiotic wastewater. International Journal of Engineering Research and Applications, 2 (6). pp. 80-86. ISSN 2248-9622

Musa, Mahdi Alhaji (2012) Understanding of critical success factors in UTM e-learning from students perspectives. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Musaed Al-Fareh, Mohammed Abdullah (2012) Adoption to online collaboration in the Yemeni construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustaffar, Mushairry and Saari, Radzuan and Abu Bakar, Suhami and Moghadasi, Mostafa and Marsono, Kadir (2012) The measurement of full scale structural beam-column connection deformation using digital close range photogrammetry technique. Malaysian Journal of Civil Engineering (MJCE), 24 (2). pp. 148-160. ISSN 1823-7843

Mustapa, Mohd. Azlan (2012) Construction safety in Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mustapha, Azwan (2012) Stochastic streamflow analysis and simulation using disaggregation model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Mydin, Shaik Hussein (2012) Quantitative buildability assessment system for building project. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

N

Nabiollahi Najafabadi, Akbar (2012) An integrated service architecture framework for information technology service management and enterprise architecture. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Najafabadi, Akbar Pourshabanan (2012) Query-based MIHA scheme for en-route filtering of injected false data in wireless sensor networks. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Namazi, Eshagh (2012) Assessment of building performance under ground movement due to tunnel construction. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Narayana Samy, Ganthan (2012) Analysing information security threats in healthcare information systems using survival analysis method. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nasri, Azzuana (2012) Elastic analysis of torsional buckling for portal frame structures. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ng, Pek Shi (2012) Crowdsourcing approach to the development of community based volunteering system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngien, Su Kong (2012) Experimental and numerical analysis of non-aqueous phase liquids migration in double-porosity subsurface systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ngu, Siaw Ling (2012) Effect of soil nailing on the stability of a rectified slope. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ni'am, Moh Faiqun (2012) Suspended solids removal in wastewater using electrocoagulation and magnet. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nia, Moheb Rajaei (2012) Image recognition for measurmenet of quality in industrial building system production line. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noekhah, Shirin (2012) Hybridization of imperialist competitive algorithm (ICA) and multi layer perception neural network (MLP) for software reliability prediction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Noordin, Mohd. Afzainizam (2012) Life cycle costing of pressurize pipeline system for project paddy irrigation in Kelantan. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nor Ozman, Nor Apaziah (2012) Development of an integrated assessment tool for corroding pipeline. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Nour Moussa, Ahmed (2012) Digital forensics readiness implementation framework. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

O

Olusegun, Adeyemo David (2012) Implementing lean production principles into the Nigerian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Fouad Youssouf (2012) Students' awareness on facebook's privacy settings applications and their self disclosure. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Osman, Mohd. Zamri (2012) A study and development of graphical user authentication for web based application. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Bakhtiar Affandy (2012) Performance of embankment on bamboo-geotextile composite reinforced soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Othman, Fadil (2012) Framework for green construction assessment: a case study of government institution building project in Jakarta, Indonesia. Journal of Emerging Trends in Engineering and Applied Science (JETEAS), 3 (4). pp. 576-580. ISSN 2141-7016

Othman, Fadil (2012) Improving project performance and waste reduction in construction projects: a case study of a government institutional building project. International Journal of Technology (IjTech), 3 (2). pp. 182-192. ISSN 2086-9614

Othman, Fadil (2012) lmproving project performance and waste reduction in construction projects: a case study of a government institutional building project. International Journal of Technology, 3 (2). pp. 182-192. ISSN 2086-9614

Othman, Zolqernine (2012) Texture analysis based algorithm to classify soft and hard tissue for MRI image of knee. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

P

Pakdel, Rezvan (2012) A user-friendly CAPTCHA scheme based on usability features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pakdel, Samira (2012) A new assembler method for sport video classification using low-level visual features. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Pezeshkzadeh, Seied Abolfazl (2012) Cost-benefit analysis of potential photovoltaic technology implementation for institutional buildings in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Porhemmat, Mojtaba (2012) Daily stream flow forecasting using artificial neural networks (case study: the upper Bernam River basin). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Putra Jaya, Ramadhansyah (2012) Influence of sulfate and chloride on the mechanical properties of fired clay masonry wall. International Journal of Integrated Engineering, 4 (2). pp. 29-38. ISSN 2229-838X

Putri, Erisa Viony (2012) Cultivation of microalgae using palm oil mill effluent for lipid production. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

R

Rafieizonooz, Mahdi (2012) Minimizing delay in construction projects in Tehran, Iran. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ranjbar, Navid (2012) Nonlinear finite element analysis of multi-layers slim IBS beams. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rashid, Samad (2012) The schur multiplier, nonabelian tensor square and capability of some finite groups. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rastegari, Hamid (2012) Web search personalization using ant foraging model and artificial immune systems. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Ratib, Mario Makarious (2012) Construction project management practice in the Sudanese construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Razmara, Jafar (2012) Text-based protein structure modeling for structural comparison. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rezaeianpakizeh, Mohammad (2012) Structural system analysis and design for safe house. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Rosanty, Elvira Soufyani (2012) Multi-criteria decision making fuzzy AHP and social choice method for group decision support system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Roslan, Syaiful Marzuki (2012) Effect of changing suction on shear strength of unsaturated soil. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

S

Sabamehr, Ardalan (2012) Computer simulation of bridge girder reinforced with FRP. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saberi, Iman (2012) Encryption implementation enhancement of AES-CCMP in 802.111. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saeedfar, Soheil (2012) Distribution of pollutant in longitudinal direction of open channel flow. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sahraei, Mohammad Ali (2012) Delay at priority junctions on low speed roads during twilight time. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salam, Hafsah (2012) Garis panduan amalan penggunaan maklumat facebook dengan selamat berdasarkan ciri kualiti maklumat. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salarian, Maryam (2012) Determining the influence of cognitive style on infromation seeking behavior for proposing user profile. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saliman, Joohana (2012) Pola sahsiah diri dalam kalangan banduan di penjara pra bebas Dusun Datuk Murad, Melaka. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Salman, Saleem Abbulridha (2012) Statistical analysis to assess the impact of landuse on groundwater quality. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Marlina (2012) Adhesion of chip seal using different type of pre- coating material. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Samsudin, Ruhaidah (2012) The enhanced group method of data handling models for time series forecasting. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sani, Mohd. Shahnaz (2012) Assessment of reinforced concrete jetty structure exposed to marine environment. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sani, Suleiman Isah (2012) A framework for improving key performance indicators delivery process using viable system model. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Saparudin, Saparudin (2012) An automatic fingerprint classification technique based on singular points and structure shape of orientation fields. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sayed Abdullah, Sh. Nurrul Hazwani (2012) Driver's merging gap at midblock U-turn on divided multilane highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seow, Chee Wai (2012) Development of a system approach for support decision making of refurbishment need. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Setiyawan, Prabowo (2012) Plastic behaviour of strengthened cold-formed steel section. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Seyed Ahmad, Noorani (2012) Simulation of blasting induced ground vibration by using artificial neural network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sha'ari, Fatimah Az-Zahra' (2012) Performance of mobile jack-up units in various subsoil conditions. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shahabudin, Norliza (2012) Amalan housekeeping di tapak bina. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shaik Alaudeen, Shaikh Badarudeen (2012) Modelling of horizontal shear interaction in composite slab using cartesian connector element. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shaikh, Abdul Wahab (2012) Time and budget overrun in the construction of town houses in Dubai U.A.E. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sharaf Mohammed, Gehad Mohammed (2012) Study on social network usage from islamic perspective among UTM muslim students. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sheikh, Shujaatullah (2012) Strengthening of reinforced concrete columns using FRP fabric. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shojaie, Bahareh (2012) Enhancing EAP-TLS authentication protocol for IEEE 802.11i. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Shourangiz, Ehsan (2012) The development of automated system for evaluating design changes fee using BIM support. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Singh, Chandran Kartar (2012) Prediction of lateral load bearing capacity by International Union of Railways (UIC) / Office for Research and Experiments (ORE) method. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sivarajasingham, Sivakumar (2012) Lean principle to construction waste management : case study on high rise project development. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sookhak, Mehdi (2012) Detecting wormhole attack in geographic routing protocols for wireless sensor network. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Subramaniam, Puspanthan (2012) Efectiveness of piled strip raft foundation as an alternative design of pile to set foundation on thick soft clay. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sukur, Prakash (2012) Cost of safety compliance's at transmission line projects. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Farah Farhana (2012) Soil suction profile due to tree induced suction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sulaiman, Sarina (2012) Intelligent mobile web pre-caching using social network analysis. PhD thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Suleiman, Jibrin Hassan (2012) The construction of residential houses in Gombe, Nigeria. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Sundari, Rita and Hadibarata, Tony and Lee, Yook Heng and Ahmad, Musa (2012) A new biosensor based on nanogold doping in p-HEMA alcohol oxidase detects formaldehyde in fresh food. Trends in Applied Sciences Research, 7 (9). pp. 737-747. ISSN 1819-3579

Surif, Johari and Ibrahim, Nor Hasniza and Mokhtar, Mahani (2012) Construction of Modul Celik Mol to increase the effectiveness of the processes of teaching and learning science. Learning Science and Mathematics (7). pp. 12-21.

Syafruddin, Syafiqah (2012) Scoring assessment of regional materials for green highway. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

T

Taheri, Shahrooz (2012) Noise reduction in frequent terms sets clustering. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Taherkhani, R. and Saleh, A. L. and Nekooie, Mohammad Ali and Mansur, Shaiful Amri (2012) External factors influencing on Industry Building System (IBS) in Malaysia. International Journal of Sustainable Development & World Policy, 1 (2). pp. 66-79. ISSN 2306-9929 (Print); 2305-705X (Electronic)

Tahmasebi, Mohammad Mahdi (2012) Building time comparison between conventional and industrialized building system using schedule simulation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tai, Kah Mon (2012) Performance of concrete with uncrushed palm oil shell as coarse aggregate. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Cher Siang and Yeong, Huei Lee and Yee, Ling Lee (2012) Experimental investigation on cold-formed steel beams under pure bending. Jurnal Teknologi, 58 . pp. 13-20. ISSN 127-9696 (Print); 2180-3722 (Electronic)

Tan, Jun Jun (2012) The trophic state of Sungai Pulai. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tan, Mei Ying (2012) Achieving integrated project design using building information modeling (BIM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tang, Xue (2012) Sensitivity study of blind bolted end-plate connection on structural hollow section. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teo, Kien Hee (2012) Vertical greenery system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Teoh, Boon Siong (2012) Managing subgrade perparation process using GPS machine control system. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Then, Charles Khoon Thiam (2012) Optimization of medium and fermentation parameters for high cell density cultivation of azotobacter vinelandii. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Tjahjanto, Dwi and Sriyana, Sriyana and Harun, Sobri and Ismail, Zulhilmi and Heryansyah, Arien and Askari, Muhamad (2012) Eco-drainage pond in non irrigated land for the conservation of land and water based on community participation. Journal of Environmental Science and Engineering B, 1 . pp. 92-99. ISSN 1934-8932

Torabi, Mohsen (2012) Performance measurement of value management (VM) for the Malaysian construction industry. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

U

Ujang, Zaini and Yusop, Zulkifli and Mohd. Amin, Mohd. For and Mohanadoss, P. and Sairan, F. M. and Shukor, S. N. and Anuar, A. N. and Starki, M. (2012) Centralized or decentralized - best project option (BPO) for Melana River Basin, Malaysia. ARPN Journal of Science and Technology, 2 (10). pp. 897-903. ISSN 2225-7217

Usop, Nur Fadzilla (2012) Sensitivity analysis on the estimation of evapotranspiration models. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

W

Wan Abdul Rashid, Wan Azlan (2012) Numerical analysis on static load capacity of prestressed concrete sleepers under hypothetical bearing pressure distribution. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hamzah, Wan Nor Hanisah (2012) Statistical downscaling of precipitation extreme events. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wan Hassan, Wan NurFirdaus and Mohamad, Hisham (2012) Evaluation of finite element formulation for one-dimensional consolidation. International Journal of Scientific & Engineering Research, 3 (5). pp. 1-5. ISSN 2229-5518

Wan Muhammad, Wan Noor Afizal (2012) Dam break modelling for Sembrong Dam. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wider, Walton and Harun, Siti Aminah and Tian , Li Na and Alias, Nur Salmiah (2012) Aggression and antisocial behavior – ways of overcoming aggression. [Teaching Resource] (Unpublished)

Wong, Choon Siang (2012) Properties of glass fiber reinforced self compacting concrete. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Wong, Chuan Yip (2012) Non-linear finite element analysis of reinforced concrete beam half-joints. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Y

Yahaya, Nordin and Md. Noor, Norhazilan and Budiea, A. M. A. (2012) Corrosion of API X70 steel due to near shore sediment. International Journal of Civil & Environmental Engineering IJCEE-IJENS, 12 (3). pp. 84-88. ISSN 2077-1258 (Electronic) ; 2227-2763 (Print)

Yasi, Alireza (2012) Effect of wave energy attenuation of a submerged porous breakwater. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yasin, Mohd. Norazam (2012) Maintenance organization at Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusof, Nur Hotimah (2012) Achieving green campus: acoustic quality improvement for 'Smart Classroom' for better learning process (Sustainable Construction and Building). Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusoff, Norhayati (2012) Ultimate bearing capacity of piles in cohesive soil using cone penetration test results. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Yusop, Zulkifli (2012) Modeling the distributions of flood characteristics for a tropical river basin. Journal of Environmental Science and Technology, 5 (6). pp. 419-429. ISSN 1994-7887

Z

Zadeh, Mojtaba Ali (2012) Security and performance benchmarking of lightweight encryption algorithms for secure RFID systems. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zainal, Nur Hidayah (2012) Construction knowledge for improving buildability of slope construction. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakari Usman, Usman Musa (2012) Assessing risk factors and their relationships in enterprise resource planning (ERM) post-implementation. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zakaria, Rozana and Ahmad Shakri, Md. Rajuna and Yahya, Khairulzan and Abd. Samad, Badrul Hisham and Md. Tarekh, Noor Aliza (2012) The sources and factors of tuberculosis transmission at hospital for sustainable indoor air. International Journal of Environmental Protection, 2 (3). pp. 29-32. ISSN 2226-6437

Zamzuri, Ahmad Khairul (2012) Modification of slope maintenance program along FT59, Jalan Tapah-Cameron Highland, Perak. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zarebidaki, Ali (2012) Shortest lead time for document management in construction for shortest lead time of projects using Microsoft Office Groove. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zohoori, Bahareh (2012) A production performance measurement technique using earned value analysis - adaptive fuzzy control. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulkafli, Noor 'Azzah (2012) Perbandingan tahap kepentingan elemen keselamatan dan tahap kepuasan keselamatan dan tahap kepuasan penduduk di perumahan komuniti berpagar Kuala Lumpur. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.

Zulkifly, Siti Zuraidah (2012) Toward Islamisation of construction contract system in Malaysia. Masters thesis, Universiti Teknologi Malaysia, Faculty of Civil Engineering.